Messages in mavicmini
[2019-10-31 09:48:47]
validat0r :
@ilovemynexus4 has joined the channel
[2019-10-31 09:49:13]
validat0r :
set the channel description: <https://www.dji.com/de/mavic-mini/specs>
[2019-10-31 09:49:29]
validat0r :
set the channel description: <https://www.dji.com/en/mavic-mini/specs>
[2019-10-31 10:04:58]
validat0r :
<https://www.youtube.com/watch?v=pv97fCP13SE>
[2019-10-31 10:52:21]
jonathan923 :
@jonathan923 has joined the channel
[2019-10-31 15:06:06]
trulala69 :
@trulala69 has joined the channel
[2019-10-31 21:08:27]
asdrubale :
@asdrubale has joined the channel
[2019-11-02 18:28:32]
oakley75 :
@reoak has joined the channel
[2019-11-03 20:59:56]
pingspike :
@rich has joined the channel
[2019-11-03 21:01:19]
pingspike :
guys, is the DJI Fly app mirrored for download anywhere in the wild? (.ipa or .apk)
[2019-11-04 12:24:39]
yu535 :
@yu535 has joined the channel
[2019-11-08 18:51:59]
cantrepeat :
@catalinaskirace has joined the channel
[2019-11-11 02:44:22]
mark :
@mark has joined the channel
[2019-11-11 08:52:25]
deesparko :
@deesparko has joined the channel
[2019-11-11 09:00:02]
deesparko :
So it's more crippled than the Spark.
No exposure bracketing, no burst for a drone w/o RAW support WTH? No ISO, no shutter control for video.
No intelligent modes (tracking for example) but tracking works in quickshots so there's hope (a tiny thou) to port those modes from the DJI Go app, or to enable Mini support in the app by mimicking it with Mavic Pro, etc...
[2019-11-11 23:45:56]
pawelsky :
@pawelsky has joined the channel
[2019-11-13 03:28:44]
d51 :
@d51 has joined the channel
[2019-11-13 14:15:21]
timopro :
@timopro has joined the channel
[2019-11-15 14:59:58]
pingspike :
so `.200` was released...
[2019-11-15 15:00:02]
pingspike :
<https://dl.djicdn.com/downloads/Mavic_Mini/Mavic_Mini_Release_Notes_en.pdf>
[2019-11-15 23:03:22]
makingthisnameup :
@makingthisnameup has joined the channel
[2019-11-16 22:07:16]
massimo.ardizzone :
@massimo.ardizzone has joined the channel
[2019-11-16 22:09:20]
massimo.ardizzone :
rc attached on tty.. little message from rc
[2019-11-16 22:10:21]
massimo.ardizzone :
[2019-11-17 01:03:23]
bjoneseying :
@bjoneseying has joined the channel
[2019-11-17 14:02:24]
matthijst :
@matthijst has joined the channel
[2019-11-17 20:44:05]
pingspike :
anyone been able to install the DJI Fly app on a CrystalSky? I get an error saying "there was a problem parsing the package"
[2019-11-17 20:47:10]
oakley75 :
Prob that pesky obb file
[2019-11-17 20:48:38]
pingspike :
obb file mate? :thinking_face:
[2019-11-17 23:11:05]
oakley75 :
If like regular Android, there's an obb file that is missing when that parsing error shows up. Didn't know if that's possibly the issue
[2019-11-19 17:18:35]
pingspike :
I think the core android OS under the hood of the CS is just too old a version to install the Fly app on
[2019-11-19 20:12:37]
oakley75 :
Since the mini camera hardware seems to be technically sufficient, reckon there's an opportunity to bump up the video bitrate to at least match mpp's 60mbps? Stock is 40mbps and is... let's say... not spectacular
[2019-11-19 20:30:03]
bjoneseying :
Enabling H265 might be a better option to make more efficient use of the coding rate
[2019-11-19 20:33:17]
oakley75 :
Smart thought, didn't know that was sitting in there
[2019-11-20 09:34:00]
bjoneseying :
It isnt as far as I'm aware, but if it was enabled by some means may lead to some better results
[2019-11-20 16:09:14]
massimo.ardizzone :
rc of MM is rc160. this is same for CE and FCC version.. ? any idea for put rc FCC firmware on rc CE model?
[2019-11-20 16:17:07]
validat0r :
rc model MT1SS5 is only capable of 5.8GHz, that's FCC, and rc model MT1SD25 does 2.4GHz+5.8GHz on CE power levels
[2019-11-20 16:18:14]
validat0r :
RC requests some gpio to check which version it is
[2019-11-20 16:18:28]
validat0r :
some ideas, but nothing definitive as of yet
[2019-11-20 16:45:04]
massimo.ardizzone :
ok but i think the rcs have the same hardware and is the firmware that set powers
[2019-11-20 16:45:49]
validat0r :
sure. but it get's its hints from some hw based setting
[2019-11-20 16:49:33]
pingspike :
rather than just using the current GPS location?
which means a hack could be a permanent FCC fix :thinking_face:
:bow:
[2019-11-21 07:28:29]
massimo.ardizzone :
[2019-11-21 07:30:25]
massimo.ardizzone :
this is an mr1ss5 in italy.
instead If we use an mr1sd25 in us the message come with label mr1ss5..
[2019-11-21 08:39:37]
haloweenhamster :
@haloweenhamster has joined the channel
[2019-11-22 04:21:36]
softice :
@softice has joined the channel
[2019-11-23 09:13:39]
pingspike :
New iOS app v1.0.3 out today which fixes the 15m RTH bug
[2019-11-23 14:09:59]
validat0r :
Switched back to CE again as soon as has ac gps
[2019-11-23 16:32:52]
asdrubale :
If you want there is one possibilty to mantain fcc in an aircraft ss5 in europe to have 1 watt also in europe . Using fake gps select usa , Starting with controller not connected to the mobile dvice a) switch on controller b) switch on mini c) start motor , take off with only controller d) at 1,2 mt connect controller , be sure to made home point . now you can fly dji app will never change area during flight ....than you will have 1 watt full available even if you are n europe . landing and stopping procedure : a) go to home point or where you want land but in a safe area not fare from home point just to be safe ,but don't land b) hvering 1 mt at home point c) disconnet device da controller d) land only using controller e) stop motor in this case app never change area .
[2019-11-23 16:37:30]
validat0r :
ok. thx
[2019-11-24 14:56:45]
validat0r :
i'm getting the hang of it .. fcc'ing with some tricks in the field seems to work
[2019-11-24 14:57:13]
validat0r :
anybody played with parameters yet?
[2019-11-24 14:57:49]
validat0r :
have sport_mode_vel_down at -10, but the craft seem to only make -3 ...
[2019-11-24 14:58:29]
validat0r :
plus straight up after 270m in fcc the connections fails .. that's quite disappointing in comparison the spark for example
[2019-11-24 14:58:51]
validat0r :
in ce it's at 200m
[2019-11-24 15:14:39]
pingspike :
what sort of tricks @ilovemynexus4 ? :thinking_face:
[2019-11-24 15:21:36]
validat0r :
Holding Hand over AC so it doesn't get a GPS fix, for example
[2019-11-24 15:25:42]
pingspike :
oh :rolling_on_the_floor_laughing:
[2019-11-24 15:26:40]
pingspike :
so it boots to FCC by default every time? (and switches to CE when it gets a gps lock) Does it not remember it's setting from the last use?
[2019-11-24 15:42:39]
validat0r :
When it has no GPS lock andthe app is on FCC territory, the system switched to FCC. When you arm motors, it stays on FCC. As long as it doesn't get a ac GPS lock that says otherwise before motors are up.
[2019-11-24 16:28:42]
massimo.ardizzone :
but why not use frida on fly app with us region for fcc?
[2019-11-24 16:29:24]
massimo.ardizzone :
ah yes android device sorry
[2019-11-25 01:14:35]
the_lord :
@the_lord has joined the channel
[2019-11-25 22:32:42]
massimo.ardizzone :
@the_lord we have found an resistor (i think) in the ac board (ce?)..
[2019-11-25 22:33:26]
massimo.ardizzone :
come to ~hardware
[2019-11-26 15:10:12]
validat0r :
awesome: with vert_vel_down_adding_max=-10 you get full speed downwards .. works perfectly.
[2019-11-26 15:45:33]
massimo.ardizzone :
with comm_og_service_tool.py ?
[2019-11-26 16:18:31]
validat0r :
yes
[2019-11-26 16:18:50]
validat0r :
makes nice wind noises at this down vel :smile:
[2019-11-26 16:19:02]
validat0r :
not so much prop noises
[2019-11-26 16:19:14]
validat0r :
have to check the rpms
[2019-11-26 16:20:07]
validat0r :
got a nice 2.1km out of the FCC setting. but only flying backwards .. flying nose first I only got 1.1km rage before wifi dropped
[2019-11-26 16:20:23]
validat0r :
wonder how far true FCC goes
[2019-11-26 16:21:04]
validat0r :
no one with FCC gear<!here>?
[2019-11-26 16:22:32]
pingspike :
CE here :man-raising-hand:
[2019-11-26 16:34:15]
massimo.ardizzone :
@ilovemynexus4 how to set fcc on ce model?
[2019-11-26 16:34:38]
validat0r :
gps spoof on the android device
[2019-11-26 16:35:22]
massimo.ardizzone :
on apple nothing?
[2019-11-26 16:35:23]
validat0r :
plus some more
[2019-11-26 16:35:49]
validat0r :
i don't fly on iOS. sorry
[2019-11-26 16:35:58]
massimo.ardizzone :
what plus?
[2019-11-26 16:36:55]
validat0r :
well, connecting the AC in a place without GPS reception, arming the motors in that place, then let the AC get a proper GPS fix (plus maybe removing the gps mocking on the smartdevice)
[2019-11-26 16:37:07]
validat0r :
that's just my special dance atm .. maybe there's a better solution
[2019-11-26 16:37:07]
massimo.ardizzone :
ok
[2019-11-26 16:37:45]
validat0r :
not sure yet, it does me any good range-wise .. will see over the next couple of days flying
[2019-11-26 16:41:11]
validat0r :
height measurement of the AC seems to be pretty bad .. i'm normally at -10m when coming back to ground level at the home point
[2019-11-26 16:42:05]
validat0r :
VPS of spark seems to be much better. Don't see the app correcting for the distance to ground measured by the downward sensor
[2019-11-26 17:02:27]
validat0r :
Galileo positioning still isn't enabled .. only GPS and Glonass
[2019-11-28 16:53:20]
markusfriedl :
how long is the average battery loading time with a common quick charger?... could you suggest one?
[2019-11-29 13:14:41]
oakley75 :
Anyone have fly app v1.0.2 apk? I've been downloading every version from dji direct and somewhow missed this one. FYI I'm talking the complete apk (w obb) only from dji direct. Thanks everyone.
[2019-11-29 13:15:30]
oakley75 :
For reference: <https://www.dji.com/mobile/downloads/djiapp/dji-fly>
[2019-11-30 20:11:25]
pingspike :
did they even release `1.0.2` ?
[2019-12-01 12:31:50]
massimo.ardizzone :
boys! how to speedup the MM? what is the right parameter?
[2019-12-01 12:32:30]
massimo.ardizzone :
tilt angle seems not sufficient
[2019-12-01 12:34:51]
massimo.ardizzone :
we have tested this:
Mode sport:
Tilt angle 45
Rc scale 1
Vel up 6
Vel down -6
Tors gyro 180
Brake 70
[2019-12-01 12:52:42]
massimo.ardizzone :
i don’t find g_config_fw_cfg_max_speed
[2019-12-01 16:37:31]
cantrepeat :
Landed my mini at the mars outpost late last night! For sure cover of Time mag, for sure.
[2019-12-02 19:59:06]
pingspike :
DJI have confirmed the Mavic Mini will be supported in a future SDK release
[2019-12-02 19:59:12]
pingspike :
they just didn't say which one :confused:
[2019-12-02 23:04:48]
validat0r :
anyone with a FCC model wants to run some test cmds for me?
[2019-12-03 20:44:27]
chipmangini :
@ilovemynexus4 I have one, but it's snowing here right now, and have surgery on my hand tomorrow, but it's not on my thumb, so maybe in a couple of days. Hit me up if you haven't found someone else! :+1:
[2019-12-04 10:29:13]
validat0r :
@chipmangini no one else is moving .. so it would be great if we got get together sometime
[2019-12-04 13:15:00]
massimo.ardizzone :
i have CE
[2019-12-04 13:32:11]
pingspike :
same :confused:
[2019-12-04 19:13:06]
chipmangini :
@validaWll do, as soon as I'm pieced back together. What exactly would you like me to do? PM?
[2019-12-05 09:47:23]
markusfriedl :
is it possible to enable adb also on mavic mini?
[2019-12-05 09:56:39]
validat0r :
no. at least not yet.
[2019-12-05 11:00:31]
cantrepeat :
Since I haven't been keeping up with mini events as of yet, is there an activation bypass for it? Or does it require activation like the other mavics?
[2019-12-05 11:07:05]
validat0r :
it has a more sophisticated activation, like more recent mavics. nothing like spark. so no easy bypass
[2019-12-05 13:57:50]
timlewis40 :
Does spoofing GPS work to enable FCC mode?
[2019-12-05 14:00:09]
timlewis40 :
for iOS
[2019-12-05 14:03:38]
validat0r :
good question .. try it
[2019-12-05 14:04:46]
timlewis40 :
i wish i could but i can't :disappointed: was just wondering i have been looking at binary just trying to check some things out :slightly_smiling_face:
[2019-12-05 14:05:20]
timlewis40 :
if it don't i may know why just a fyi
[2019-12-05 14:06:06]
validat0r :
?
[2019-12-05 14:09:09]
timlewis40 :
well i see class names for country code verifier like get country code by app, app langauge , app time zone
[2019-12-05 14:09:52]
validat0r :
so not just dependable on gps position?
[2019-12-05 14:10:08]
timlewis40 :
yes thats what it looks like
[2019-12-05 14:10:13]
validat0r :
well, only one way to be sure .. jailbreak, spoof, and report back
[2019-12-05 14:10:53]
timlewis40 :
i wish i could but i cant :disappointed:
[2019-12-05 14:11:41]
timlewis40 :
i have to go but will check back latter :slightly_smiling_face:
[2019-12-05 14:11:57]
validat0r :
read sth about Checkra1n the other day .. you might want to look into that
[2019-12-05 14:54:21]
jcase :
@markusfriedl @ilovemynexus4 considering it isnt android and adb is an android thing ....
[2019-12-05 14:55:05]
markusfriedl :
don't like this idea
[2019-12-07 06:21:36]
timlewis40 :
if anyone is good with JavaScript shoot me a pm thanks :slightly_smiling_face:
[2019-12-07 21:31:24]
markusfriedl :
how did you get it connected to comm_og_service tool on linux... just get it as /dev/sdb device listed
[2019-12-07 23:55:39]
validat0r :
The ac? You have to connect it to assistant beforehand
[2019-12-08 01:56:17]
timlewis40 :
damn this iOS dji fly is a Bitch!! they got soo many damn checks in place! i keep finding more and more! :disappointed:
[2019-12-08 02:10:32]
timlewis40 :
4 checks i have found so far
[2019-12-08 08:28:45]
markusfriedl :
ok so i have to do it under windows.... i'll try it once again... and have to install the new assistant versioni guess?
[2019-12-08 10:30:15]
heresmydron :
checks for what? tampering?
[2019-12-08 11:27:53]
markusfriedl :
hint for the ones that do not like the battery charging functionality of the controller... install <https://play.google.com/store/apps/details?id=org.bramantya.stopcharging&hl=de> on your (rooted) android device
[2019-12-08 13:33:10]
heresmydron :
trying this right now on a samsung a5
[2019-12-08 13:35:47]
heresmydron :
maaan that UI is cancer
[2019-12-08 13:37:14]
heresmydron :
didnt work and it seems to be requesting root access every second
[2019-12-08 14:21:08]
markusfriedl :
thank you for the help... tested it successfully on the field and figured out that i have to modify two values.... vert_vel_down_adding_max is not enough
python comm_og_service_tool.py COM9 WM160 FlycParam set vert_vel_down_adding_max_0 -6
python comm_og_service_tool.py COM9 WM160 FlycParam set g_config.mode_sport_cfg.vert_vel_down_0 -6
worked for me for downspeed and
python comm_og_service_tool.py COM9 WM160 FlycParam set g_config.mode_sport_cfg.vert_vel_up_0 6
for upspeed
[2019-12-08 20:21:52]
markusfriedl :
it just requests it once for me on galaxy s7.. i allowed it permanently... but i agree that the UI is not the best... maybe i'll write a simple App myself... should be pretty simple
[2019-12-08 21:48:25]
heresmydron :
yeah, i selected "allow once" and it kept poping up every second
[2019-12-08 22:07:24]
markusfriedl :
i decompiled the apk and looked in the code... seems that that are multiples processes spawned to cover different types of phones (because the files that are changed differ from type to type)... and for each process spawned an own root request is triggered...not ideal but does not happen if you allow it for lets say 15minutes
[2019-12-08 22:09:30]
markusfriedl :
additionally afteri decompiled it and get rid of the buttons that nobody needs... so just two buttons are left... will try to also change the background color to black so it is more decent...(compiled it afterwards again and looks much cleaner now)
[2019-12-08 23:56:56]
timlewis40 :
country code checking this is how it knows when to do FCC or CE mode
[2019-12-09 00:03:41]
heresmydron :
what is it doing in the background?
[2019-12-09 07:17:53]
markusfriedl :
on disable the button click methods looks like this
[2019-12-09 07:17:54]
markusfriedl :
this.button.setOnClickListener(new OnClickListener() {
@SuppressLint({"SdCardPath"})
public void onClick(View arg0) {
Runtime runtime = Runtime.getRuntime();
try {
Process exec = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 1 > /sys/class/power_supply/battery/charge_now"});
Process exec2 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 1 > /sys/class/power_supply/battery/battery_charging_enabled"});
Process exec3 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 1 > /sys/class/power_supply/battery/batt_lp_charging"});
Process exec4 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 1 > /sys/class/power_supply/battery/charging_enabled"});
Process exec5 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 1 > /sys/class/power_supply/battery/charge_enabled"});
Process exec6 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 1 > /sys/class/power_supply/battery/hv_charger_set"});
Process exec7 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 1 > /sys/class/power_supply/battery/device/Charging_Enable"});
Process exec8 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 0 > /sys/class/power_supply/battery/charge_now"});
Process exec9 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 0 > /sys/class/power_supply/battery/battery_charging_enabled"});
Process exec10 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 0 > /sys/class/power_supply/battery/batt_lp_charging"});
Process exec11 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 0 > /sys/class/power_supply/battery/charging_enabled"});
Process exec12 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 0 > /sys/class/power_supply/battery/charge_enabled"});
Process exec13 = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 0 > /sys/class/power_supply/battery/hv_charger_set"});
Process proc = Runtime.getRuntime().exec(new String[]{"su", "-c", "echo 0 > /sys/class/power_supply/battery/device/Charging_Enable"});
Toast.makeText(MainActivity.this, "Charging stopped (hopefully)", 1).show();
proc.waitFor();
MainActivity.this.mInterstitialAd.show();
} catch (Exception e) {
Log.d("Exceptions", "Exception dropping caches: " + e);
}
if (MainActivity.this.mInterstitialAd.isLoaded()) {
MainActivity.this.mInterstitialAd.show();
} else {
Log.d("TAG", "The interstitial wasn't loaded yet.");
}
}
});
[2019-12-09 07:18:14]
markusfriedl :
and as you can see it is starting multiple processes as su
[2019-12-09 19:45:52]
markusfriedl :
i decompiled and recompiled the usb no charge app...no advertising (no internet access rights)... less aggressive color... less unnecessary button... if you want it <https://github.com/Ace-Code1/opendrone/blob/master/disable_usb_charge.apk>
[2019-12-09 19:59:21]
heresmydron :
is that a private repo? im getting 404
[2019-12-09 20:03:46]
markusfriedl :
please try it again.. my bad that i shared the private repo instead of the open one.. but please consider that your device needs root for it
[2019-12-10 12:06:25]
monkeyman :
Yes I have one!
[2019-12-10 16:19:45]
pingspike :
yeah makes sense, minimum android version is out too :blush:
[2019-12-10 16:20:13]
pingspike :
that question is about four weeks old, are you catching up mate? :slightly_smiling_face:
[2019-12-10 17:10:14]
markusfriedl :
ia true... had the same error on installing dji fly to my old samsung s5 cause it is 32bit
[2019-12-10 17:58:24]
jcase :
someone needs to bitch at DJI
[2019-12-10 18:02:10]
validat0r :
yeah .. we need 32bit version .. fast .. and unobfuscted
[2019-12-10 18:07:12]
jcase :
they can leave it packed/obfuscated
[2019-12-11 07:40:34]
monkeyman :
so, channel 5.1-5.7ghz basicly available but restricted by firmware only on 5.725-5850
[2019-12-12 14:50:21]
pingspike :
yeah, that's what we all thought until we saw the physical differences on the boards :confused:
[2019-12-18 10:14:24]
heresmydron :
hey guys, quick question. You know the GPS hack to put hte mini in FCC mode, right? so lately i've been forgetting to unplug the phone before landing but somehow the mavic seems to remain in FCC mode if you take off again with the phone unplugged
[2019-12-18 10:14:43]
heresmydron :
how do you check if youre in fcc mode? 11 channels in the transmission section?
[2019-12-18 10:15:00]
heresmydron :
i think theres no need to unplug the phone. as long as you take off with the phone unplugged is enuogh
[2019-12-18 10:16:07]
validat0r :
arming the craft is enough .. you dont have to actually take off
[2019-12-18 10:17:29]
heresmydron :
i thought the same but if you arm and then plug the phone, in my case i get the "aircraft connection reset" popup
[2019-12-18 10:17:37]
heresmydron :
ill try it today again anyway
[2019-12-18 10:20:43]
validat0r :
you get the popup, but it wont reset the country code
[2019-12-18 10:52:04]
heresmydron :
but theres no way to dismiss it right? its there overlapping everything else
[2019-12-18 10:57:50]
validat0r :
i dont think so
[2019-12-18 11:35:10]
timlewis40 :
i see there is an ios fcc dji fly mod out has anyone tried it yet?
[2019-12-18 13:47:19]
pingspike :
got a link you can share?
[2019-12-18 15:02:55]
validat0r :
hit the 500m height limit for the first time today. works, if you are like 300m far away, not directly on top of the RC.
[2019-12-18 15:03:06]
validat0r :
height limit sucks
[2019-12-18 18:24:22]
billyjoesteadman :
Does the DJI fly app update automatically? I've installed 1.0.2 version APK two times now and everytime I go to fly my Mavic mini the fly app is on 1.0.3
[2019-12-18 19:05:20]
jcase :
depends on yoru android/playstore settings
[2019-12-19 09:50:05]
heresmydron :
nice! mine loses connection around 150m (CE version). I ve also noticed that the connection is better if the drone is nto directly above the RC. Did you have the antennas perpendicular to the RC or at a 45 degree angle?
[2019-12-19 10:29:38]
validat0r :
having the antenna perpendicular to the direction in which the drone is optimal I think
[2019-12-19 10:30:29]
validat0r :
spoofing to FCC country before arming helps, too
[2019-12-19 11:48:21]
timlewis40 :
damn cydia impactor is broken :disappointed: anyone know of a work around?
[2019-12-28 12:31:41]
nopcode :
so you can increase the range of the CE hardware version by making it think it's in a FCC country?
[2019-12-28 12:31:50]
nopcode :
it's not limited by hardware?
[2019-12-28 12:32:40]
nopcode :
also, totally unrelated, but how much does the MM sway during landing when the ground is all dark (so it won't have VPS)?
[2019-12-28 12:32:59]
nopcode :
is it easy to hand catch it above peoples heads in a crowd, in the dark?
[2019-12-28 13:10:39]
validat0r :
it is limited by the h/w ... but you can crank up the power by a bit
[2019-12-28 14:34:53]
monkeyman :
[2019-12-28 14:56:21]
validat0r :
any chance to have this sharper?
[2019-12-28 15:10:20]
monkeyman :
got from this guy @youtube <https://www.youtube.com/watch?v=F24LT1HKyk0&feature=youtu.be>
[2019-12-28 15:11:57]
monkeyman :
he try the MM-FCC in CE country and MM-CE in FCC country using fakegps with 5.8ghz
[2019-12-28 15:26:23]
bin4ry :
he should try fcc 2.4G
[2019-12-28 15:26:32]
bin4ry :
5.8G is useless in europe
[2019-12-28 15:26:55]
bin4ry :
but 2.4G can go up to 16mW which is the same range wise as FCC US 5.8G if you do the math
[2019-12-28 15:27:01]
bin4ry :
even more
[2019-12-28 15:27:16]
bin4ry :
atleast speaking from a theoretical and optimal enviroment
[2019-12-28 15:43:34]
validat0r :
5km range on CE/US? rly?
[2019-12-28 15:54:29]
monkeyman :
I have try MM-CE using fcc fakegps, yes it help a bit, 4km? no, max 1.8km, but without fakegps it cannot more than 400m :smile:
[2019-12-28 15:55:08]
monkeyman :
in urban area, it cannot more than 600m :smile:
[2019-12-28 15:56:22]
monkeyman :
big different with MM-fcc using fakegps (I;m in indonesia) in urban area it can reach 2km. I test it myself :slightly_smiling_face:
[2019-12-28 15:56:39]
monkeyman :
after that I sold the MM-ce :smile: :smile:
[2019-12-28 15:59:38]
monkeyman :
hope fcc-boost can be done in mm
[2019-12-28 18:28:20]
nopcode :
thinking about ordering a MM
[2019-12-28 18:28:24]
nopcode :
but it would be CE here
[2019-12-28 18:28:28]
nopcode :
that's kinda holding me back
[2019-12-31 10:23:25]
pingspike :
Mavic Mini firmware `v01.00.0400` is now in the wild:
[2019-12-31 10:23:27]
pingspike :
<https://dl.djicdn.com/downloads/Mavic_Mini/20191231/Mavic_Mini_Release_Notes_en.pdf>
[2019-12-31 10:23:41]
pingspike :
along with a DJI Fly app update to v1.0.4
[2019-12-31 10:23:54]
pingspike :
(for iOS at least, not got android device to hand)
[2019-12-31 10:54:34]
validat0r :
Do we have the fw already? @cs2000
[2020-01-02 12:14:37]
pingspike :
I’ve updated to .400 :scream:
[2020-01-02 12:14:55]
pingspike :
let me know if anyone needs anything tested :grimacing:
[2020-01-03 13:24:06]
rames.d :
[https://youtu.be/Bp4CKCboYGg](https://youtu.be/Bp4CKCboYGg)
[2020-01-09 12:25:02]
beerniso :
Is there a difference between a dji mavic mini skimmer sold in Europe and that sold in the US?
[2020-01-09 12:37:40]
bin4ry :
ce and fcc models are different. fcc models are missing the 2.4G parts in the RC but have an big 5.8G amp to make up for that
[2020-01-09 12:38:10]
bin4ry :
if you want 2.4 you need to go for ce and wait for the power unlock which will come
[2020-01-09 12:38:31]
bin4ry :
if you want to stay stock and like 5.8g then go for the us model
[2020-01-09 12:38:38]
bin4ry :
i prefer the ce model
[2020-01-09 13:13:43]
heresmydron :
by power unlock you mean a hardware mod right?
[2020-01-09 13:37:48]
validat0r :
you can do a bit via software
[2020-01-09 13:39:07]
validat0r :
like increase max distance from 700m to like 1.5km. but for like 2km+ you need hw mod (antenna mod / amp mod)
[2020-01-09 13:41:07]
timlewis40 :
add external antenna and amp is the best way to go.well i think it is
[2020-01-09 13:43:11]
validat0r :
mini would be a great bird for waypoint missions. small, light, 30min flight time .. but alas f*cking GO lite doesn't support it .. not sure if litchi already does
[2020-01-09 14:56:06]
pingspike :
there's no Mini SDK support yet
[2020-01-09 14:56:19]
pingspike :
as soon as DJI release it then Litchi will be on the case :slightly_smiling_face:
[2020-01-09 14:56:25]
pingspike :
was the same with the Mavic Air
[2020-01-09 14:56:34]
pingspike :
the SDK took a month or two to follow
[2020-01-09 14:57:00]
pingspike :
which is stupid... it's not like DJI didn't know they were making a new aircraft :face_with_rolling_eyes:
[2020-01-09 15:46:44]
bin4ry :
software mod
[2020-01-09 16:32:16]
bin4ry :
that’s not really true. the output power of the ce model on 2.4g compared to the fcc model on 5.8g.... then you see that the 2.4g on software modded power has a bigger range than the fcc model on 5.8g
[2020-01-09 16:32:34]
bin4ry :
@heresmydron ^
[2020-01-09 16:33:34]
bin4ry :
so ce 2.4 in powered up mode should be superior to fcc in 5.8g mode
[2020-01-09 16:38:45]
bin4ry :
@heresmydron
```Maximum reachable txpower with CE hardware 2.4G --> 31mW 5.8G --> 15mW
Maximum reachable txpower with FCC hardware 2.4G --> none (removed hardware support for 2.4G) 5.8G --> 151mW
Freefield damping f^2 --> 5.8^2/2.4^2 = 5.84
---> 5.8G needs 5.84 higher txpower to reach the same range as 2.4G.
---> FCC / CE = 151/31 = 4.87
--> CE has more range on 2.4G than FCC on 5.8G in ideal circumstances. ```
[2020-01-09 16:39:40]
bin4ry :
this is maximum what the hardware on both CE and FCC can reach (both after software modding to the maximum, so the comparision is "fair" )
[2020-01-09 16:40:21]
bin4ry :
on top of that. FCC model does not support all channels on 5.8G
[2020-01-09 16:41:29]
bin4ry :
to be honest of course, best version is to use CE hardware version and add an better 5.8G amp to the board, so you get best of both worlds.
since the second you activate the theoretical 2.4G support on the fcc remote --> nada , linking dead won't come up again
[2020-01-09 16:41:48]
bin4ry :
until you switch it back forcefully to fcc only
[2020-01-09 17:13:20]
validat0r :
You really think 2.4Ghz/CE has more range than 5.8Ghz/FCC?
[2020-01-09 17:17:00]
bin4ry :
yes , absolutely
[2020-01-09 17:19:40]
validat0r :
I really want to believe that .. But so far I haven't come close to half of what the youtube guy on Hawaii did .. (5km)
[2020-01-09 17:22:49]
validat0r :
Granted, I haven't tried in a comparable environment .. Like deserted, elevated take off point, low humidity ..
[2020-01-09 17:26:14]
validat0r :
Maybe I can try in like 10 days .. Going to the mountains .. But then again: the mini really doesn't like high wind speeds. Which can be found ... In the mountains.
[2020-01-09 17:27:31]
bin4ry :
well the hawaii thing is special. good environment, elevated point, other people don’t reach a mile in the middle of the city in fcc environment, all boils down to such things...
[2020-01-09 17:32:46]
validat0r :
I do my range tests only over unpopulated area. So there's your occasional farm house with a WiFi router and some cellular towers .. That's it
[2020-01-09 17:35:23]
bin4ry :
well then i think we need a trip to hawaii :sweat_smile:
[2020-01-09 17:35:51]
validat0r :
Who doesn't? :wink:
[2020-01-09 17:35:57]
bin4ry :
true that
[2020-01-09 17:40:23]
validat0r :
I wonder how much effort it would be to crazy-patch GO 4.1 to detect the mini ..
[2020-01-09 17:41:33]
validat0r :
I really like to see waypoints on mini .. and I cant believe it's not in the mini's FC
[2020-01-09 17:48:01]
bin4ry :
well basically it speaks the same commands
[2020-01-09 17:48:34]
bin4ry :
it may be possible
[2020-01-09 17:49:21]
bin4ry :
i’ll try it during the weekend
[2020-01-09 17:58:17]
rames.d :
[2020-01-09 17:59:55]
rames.d :
I think that CE version has less range
[2020-01-09 18:07:58]
bin4ry :
and i don’t think that.
i even gave numbers :wink: so believing doesn’t help. proper tests only, but i don’t think anybody here except @ilovemynexus4 and me is able to really push the software mod. and i am not speaking about the funny little gps dance or modded fly app, but a real software powerup to txpower maximum.
[2020-01-09 18:09:39]
bin4ry :
let’s just wait for the patch to be published and then we do proper tests instead of discussing theory :wink:
[2020-01-09 18:27:21]
bin4ry :
i just realize that this sounds aggressive, didn’t mean it aggressive. just want to say, we should wait and do a proper test. discussions about theory doesn’t help :smiley:
[2020-01-09 21:15:58]
rames.d :
:scream::scream::scream:
[2020-01-10 12:12:13]
bin4ry :
i see your point. Usually i find the 5G band similar noisy than the 2G band. But i like to have the choice, i think hardware mod is the best solution to both remotes, add a 2G line to the FCC model or a bigger 5G amp to the CE model, both "same" hardware mod but would be the "best" solution to get maximum out of it :wink:
[2020-01-11 11:41:51]
validat0r :
did a nice 2.2km flight today with CE model / spoof to FCC country .. connection dropped at 2km, flying backwards it did another 200m .. all on 2.4GHz .. CH 1 .. height was 100m .. maybe flying higher gets some more distance .. or tomorrow I'l try that elevated take off point
[2020-01-11 12:42:15]
cantrepeat :
hax!!! Reported!
[2020-01-11 18:52:30]
trulala69 :
:+1:
[2020-01-11 19:40:22]
markusfriedl :
@ilovemynexus4 do you spoof the the fcc country just by spoof location on your smartphone or is something on the drone necessary too?
[2020-01-11 19:40:41]
validat0r :
nah, only smartphone
[2020-01-11 19:41:19]
validat0r :
but you have to arm the AC before it gets a GPS lock
[2020-01-11 20:53:59]
markusfriedl :
what do you mean exactly with "arm before"?
[2020-01-11 21:32:35]
validat0r :
when the AC gets a location independenly from the smartphone before the motors are running, the app resets the country code according to the new location
[2020-01-11 21:32:45]
validat0r :
so your spoofing gets overridden
[2020-01-12 14:00:20]
hazardc :
@*validat0r need a beta tester for that tx mod on the mini? Have you tried any bird-side antenna mods?*
[2020-01-12 14:03:28]
validat0r :
no. haven't delved into that hw modding thing yet.
[2020-01-12 14:04:09]
validat0r :
mini is so delicate, every mod surly breaks sth
[2020-01-12 14:05:15]
hazardc :
yeah it's a fragile feeling bitch
[2020-01-12 14:05:55]
hazardc :
I'm waiting on my m1p gimbal ribbon and need muh boost mode to go film some flooding lol
[2020-01-12 14:05:59]
validat0r :
have pulled out one antenna and I think already broke sth
[2020-01-12 14:06:41]
validat0r :
spoofing to fcc country works quite well
[2020-01-12 14:06:49]
hazardc :
I'm in FCC country
[2020-01-12 14:07:00]
hazardc :
in the states
[2020-01-12 14:07:02]
validat0r :
ah, ok .. and you have a FCC bird?
[2020-01-12 14:07:08]
hazardc :
yessir
[2020-01-12 14:07:11]
validat0r :
doesnt get better than that
[2020-01-12 14:07:27]
validat0r :
without hw mod
[2020-01-12 14:07:47]
hazardc :
what can we do so far? I haven't been on the slack
[2020-01-12 14:08:13]
validat0r :
your 2.4ghz capabilities are crippled, and the 5.8GHz power is quite impressive as it is
[2020-01-12 14:08:41]
hazardc :
yeah but it has like 3 channels and feed cuts constantly
[2020-01-12 14:09:00]
validat0r :
yeah, innercity 5.8ghz sucks balls
[2020-01-12 14:09:12]
hazardc :
desperately needs mods
[2020-01-12 14:09:45]
validat0r :
dont hold your breath .. 2.4ghz isnt coming soon on FCC mini
[2020-01-12 14:10:06]
hazardc :
what about tx/rx boost?
[2020-01-12 14:10:20]
validat0r :
there's no amp chip for 2.4 in either FCC RC nor FCC AC
[2020-01-12 14:10:38]
hazardc :
boost the stock?
[2020-01-12 14:11:06]
validat0r :
one guy did 5km with stock FCC mini in Hawaii .. don't think it gets better than that with software boosts
[2020-01-12 14:11:17]
hazardc :
like I do with the m1... or something that opens up more channels like my p4p v1 with 32 ch
[2020-01-12 14:11:35]
validat0r :
you can't compare p4p to mini
[2020-01-12 14:11:39]
validat0r :
apples pears
[2020-01-12 14:11:41]
hazardc :
obviously
[2020-01-12 14:12:04]
hazardc :
can't compare m1p either but RC Tx power i would think would be able to be boosted
[2020-01-12 14:12:22]
hazardc :
these are rookie numbers
[2020-01-12 14:14:32]
validat0r :
"boosting" wifi birds is normally done via changing the country code .. and usually "US" is already max Tx power ..
[2020-01-12 14:15:18]
hazardc :
buuut i wannt the 1.8 watt mode like my mavic
[2020-01-12 14:15:42]
hazardc :
or dji sneaking in 2.33 again
[2020-01-12 14:15:56]
hazardc :
or any uncongested freq lol
[2020-01-12 14:16:20]
validat0r :
only works with ocusync birds. mini is wifi
[2020-01-12 14:19:10]
hazardc :
i have a 15w wifi antenna on my roof p2p lol
[2020-01-12 15:04:43]
bin4ry :
you can only boost fcc a little via software
[2020-01-12 15:04:46]
bin4ry :
but nothing to big
[2020-01-12 15:04:58]
bin4ry :
and you only will get the few channels you have
[2020-01-12 15:05:15]
bin4ry :
fcc model sucks balls in the city
[2020-01-12 21:37:40]
hazardc :
Yeah it does.. Total ASS
[2020-01-12 21:38:08]
hazardc :
Hey look everyone i can fly my little triangle on the map with no video feed for MILES!
[2020-01-13 10:58:28]
trulala69 :
Switching to FCC requires the AC to be armed without aquiring a GPS position/signal, right? Is there any unobvious method doing this other than placing a huge aluminium shield around the MM?
[2020-01-13 10:59:15]
trulala69 :
"Switching to FCC requires the AC to be armed without aquiring a GPS ..." after being switched tom FCC eg at home, of course ...
[2020-01-13 11:21:53]
validat0r :
Doest have to be so sophisticated ... Just sit and put the ac under your legs
[2020-01-13 11:23:00]
validat0r :
When it has connected to rc, put it on the ground and do CSC, let it sit there until you see a homepoint set in dji fly, meanwhile disable the gps spoofer on your smart device. there will be a dialog "restarting system because of different wifi settings" but it wont really change the settings on ac/rc. that's the trick
[2020-01-13 12:06:23]
trulala69 :
Never thought of this, brillant! Thankes
[2020-01-13 12:06:31]
trulala69 :
Thanks, mate ...
[2020-01-13 12:13:14]
validat0r :
be sure to have a valid homepoint before take-off. otherwise you might be in trouble.
[2020-01-13 12:26:28]
trulala69 :
Sure ...
[2020-01-13 12:28:41]
trulala69 :
But I hope someone comes up with a permanent software solution ...
[2020-01-13 14:08:54]
validat0r :
hmm .. full hd video at 60fps is totally wobbly ...
[2020-01-13 14:09:14]
validat0r :
looks awkward
[2020-01-13 14:20:33]
billyjoesteadman :
Does your DJI Fly app have to be on 1.0.2 for the FCC Spoof I heard I don't work on 1.0.3 and up I've always had mine on 1.0.2 with FCC Spoof with no issues
[2020-01-13 14:27:56]
validat0r :
i'm on 1.0.3
[2020-01-13 17:18:41]
hazardc :
doesn't seem like stabilization could keep up... how were winds?
[2020-01-13 17:37:54]
validat0r :
could have been wind rattling at the cam, of course
[2020-01-14 17:06:20]
validat0r :
getting better .. today 2.8km with CE/US/2.4 :smile:
[2020-01-14 17:07:08]
validat0r :
nice conditions, little wind, elevated take-off point, cross country
[2020-01-14 17:07:54]
validat0r :
plus super steady video (full HD @ 60fps)
[2020-01-14 17:25:26]
nopcode :
@ilovemynexus4 so, CE model?
[2020-01-14 17:25:34]
validat0r :
Sure
[2020-01-14 17:25:41]
nopcode :
nice.
[2020-01-14 17:26:07]
nopcode :
still waiting for mine... ordered around new year
[2020-01-14 17:26:16]
validat0r :
Dang
[2020-01-14 17:26:37]
nopcode :
hope it opens up more spots to fly in the city since people will treat it more like a toy
[2020-01-14 17:26:55]
validat0r :
Light like a feather
[2020-01-14 17:27:11]
nopcode :
how susceptible is it to wind, really?
[2020-01-14 17:29:18]
validat0r :
Haven't tried in more windy conditions
[2020-01-14 17:29:38]
nopcode :
ok... and what was that issue with wobbly video you posted above?
[2020-01-14 17:29:46]
nopcode :
rolling shutter or sth?
[2020-01-14 17:30:12]
nopcode :
ah i didnt read your answer, i see
[2020-01-14 17:30:35]
nopcode :
ah well i take mostly pictures anyways
[2020-01-14 17:31:01]
validat0r :
was maybe a shaking gimbal due to wind .. have to do more flights in different conditions.
[2020-01-14 17:31:22]
validat0r :
coming from spark, 60fps video looks really nice
[2020-01-14 17:31:58]
nopcode :
:slightly_smiling_face:
[2020-01-14 17:32:56]
validat0r :
*can be impressed with the simple things .. 3 axis gimbal, 60fps ...*
[2020-01-14 17:33:12]
nopcode :
my m2p can do that but i almost never shot videos so...
[2020-01-14 17:33:22]
nopcode :
i dont know what to do to make a nice video
[2020-01-14 17:33:29]
nopcode :
and i'm scared of flying backwards :smile:
[2020-01-14 17:33:35]
nopcode :
or sideways
[2020-01-14 17:33:59]
nopcode :
maybe i'll try with the mini since i got the insurance this time
[2020-01-14 17:34:44]
nopcode :
btw, worst case, how much is a replacement aircraft only and where do you buy it?
[2020-01-14 17:34:50]
validat0r :
mini can rotate over the yaw axis during rth .. that's nice
[2020-01-14 17:34:52]
nopcode :
cant find that on DJI's shop
[2020-01-14 17:35:14]
validat0r :
haven't seen ac only
[2020-01-14 17:35:21]
nopcode :
oh ic. yeah since it doesnt have collision sensors it doesnt matter which way its facing on RTH
[2020-01-14 17:35:35]
validat0r :
probably
[2020-01-14 17:35:54]
nopcode :
have you heard of compass issues / flyaways?
[2020-01-14 17:36:04]
nopcode :
just wondering since it doesnt have a redundant compass...
[2020-01-14 17:36:11]
validat0r :
nope .. all rock solid as of now
[2020-01-14 17:36:16]
nopcode :
nice :slightly_smiling_face:
[2020-01-14 17:36:28]
nopcode :
wondering if they start using the bottom camera for that even at higher altitudes
[2020-01-14 17:36:39]
validat0r :
plus i'm still on .0000 firmware
[2020-01-14 17:36:45]
nopcode :
i know the M2P uses the collision cameras as an additonal
"compass"
[2020-01-14 17:37:13]
validat0r :
not really sure what they do with the bottom cam ..
[2020-01-14 17:37:22]
validat0r :
maybe "optical flow" stuff
[2020-01-14 17:37:32]
nopcode :
i read the new FW forces you to do a compass calibration sometimes when flying in the dark
[2020-01-14 17:37:41]
validat0r :
ok
[2020-01-14 17:37:41]
nopcode :
could be interpreted as such
[2020-01-14 17:37:50]
nopcode :
yeah certainly they do optical flow
[2020-01-14 17:38:04]
nopcode :
oh hey have you tried landing at night?
[2020-01-14 17:38:13]
nopcode :
if so, how stable is it close to ground?
[2020-01-14 17:38:25]
nopcode :
wondering if i could catch it at night in a crowd of people
[2020-01-14 17:38:45]
validat0r :
not sure .. late at dawn i did .. but not pitch black night
[2020-01-14 17:39:03]
nopcode :
i see. the mavic 2 has an automatic bottom light for that purpose. it's awesome.
[2020-01-14 17:39:24]
validat0r :
really .. well, can't have both .. 249gr **and** bottom light .. sorry
[2020-01-14 17:39:28]
nopcode :
illuminates the ground, camera sees the ground, AC is stable
[2020-01-14 17:39:30]
nopcode :
sure haha
[2020-01-14 17:39:42]
nopcode :
maybe i should point a flashlight at the ground during descent
[2020-01-14 17:39:51]
nopcode :
on the other hand if i MOVE that flashlight accidently...
[2020-01-14 17:40:04]
validat0r :
mini only has the one led at the back .. so seeing it in low light conds is not so easy
[2020-01-14 17:40:08]
nopcode :
wish we could see what those cameras see
[2020-01-14 17:40:19]
nopcode :
hmm that is a good thing in my book :stuck_out_tongue:
[2020-01-14 17:45:01]
validat0r :
hmmm .. concerning wind .. looking at the logs, I only could do like 6 m/s on the way back directly into 3-5 m/s wind ..
[2020-01-14 17:47:44]
nopcode :
sport mode?
[2020-01-14 17:48:29]
validat0r :
in my experience, rth does 8 m/s, and I can push it up to 12
[2020-01-14 17:48:32]
nopcode :
kinda figures its supposed to do 13 m/s in sports mode
[2020-01-14 17:48:56]
validat0r :
so 6, even while pushing it, is unusual ..
[2020-01-14 17:49:27]
nopcode :
but if you subtract the wind speed it seems to make sense?
[2020-01-14 17:49:49]
validat0r :
so much for susceptibility towards wind
[2020-01-14 17:50:52]
nopcode :
well i would probably try to keep RTH altitude relatively low
[2020-01-14 17:51:07]
nopcode :
so it doesnt go up to 100m where the wind is strong
[2020-01-14 17:51:32]
validat0r :
yeah, was at 140m + elevated take-off point .. maybe 20m plus
[2020-01-14 17:51:47]
nopcode :
ahh ok
[2020-01-14 17:51:51]
nopcode :
i seldomly go that high
[2020-01-14 17:52:24]
nopcode :
how's the indoor behavior?
[2020-01-14 17:52:28]
validat0r :
I recon reception is better when flying high
[2020-01-14 17:52:38]
nopcode :
my dad has a MM and i tried it indoors and it behaved very nicely
[2020-01-14 17:52:50]
validat0r :
havent tried
[2020-01-14 17:52:54]
nopcode :
even though it got a gps fix only when hovering
[2020-01-14 17:53:02]
nopcode :
it didn't freak out at that point
[2020-01-14 20:17:11]
nopcode :
nice :slightly_smiling_face:
[2020-01-15 00:59:21]
hazardc :
I have less interference issues with mini than i had with the mavic air... that thing was a nightmare for interference .... but it was my favorite non-modded drone when it wasn't throwing stupid errors... no redundancies (like compass) didn't help it either.. The air was so close to being a perfect "take anywhere" drone but missed the mark imo. It had enough power, the camera was always in focus, 100mbit amazing video quality. GO4 .. IMO it felt more solid and looked way better than my mav pro and it was a blast to fly when it worked right. It deserved occusync, especially after it started costing more than the m1p
[2020-01-15 01:00:23]
hazardc :
Mini is so bad with wind I have like 2 hours every 3 days right now that are good to fly.
[2020-01-15 12:18:29]
piranha :
Thats your problem with shaky video, they fixed gimbal PID on 300 firmware
[2020-01-15 12:19:34]
validat0r :
oh really .. interesting
[2020-01-16 16:50:44]
nopcode :
@hazardc so bad in high wind? damn.
[2020-01-18 10:50:36]
heresmydron :
hi guys, what do you use to push params to the mini? im using whats described here <https://mavicpilots.com/threads/mavic-mini-re-enable-developer-tools-in-dji-assistant-2.77216/> but's too much hassle encrypting and decrypting the commands
[2020-01-18 11:20:19]
hazardc :
<https://a.uavzone.cn/params>
[2020-01-18 11:21:13]
hazardc :
load mini in assistant, close assistant, load the webpage (app from page running the whole time) and you can edit all params
[2020-01-18 11:52:05]
validat0r :
nice find @hazardc
[2020-01-18 11:52:15]
validat0r :
don't see that working with the mini though .. does it?
[2020-01-18 11:55:42]
validat0r :
ah .. i get it .. the .exe exports the com port as web socket somehow .. crafty
[2020-01-18 12:00:44]
validat0r :
not seeing any params yet
[2020-01-18 12:12:31]
validat0r :
anyway, I'd advise to be cautious running that .exe without further analyzing what it does (phoning home, encrypting your documents and demanding bitcoin, etc)
[2020-01-18 18:13:48]
trulala69 :
I‘m playing with comm_og_service_tool ... how do I select parameters in different flight modes eg tilt_atti_range in normal and in sport mode? Thanks...
[2020-01-18 18:35:58]
validat0r :
There are different parameters for different modes ..
[2020-01-18 18:36:31]
validat0r :
Wasn't there a way to list all parameters with og_service_tool?
[2020-01-18 19:00:19]
trulala69 :
I tried to list all, but I didn’t see any of those, which where posted here. If I do a get eg ong_config.mode_sport_cfg.vert_vel_up I get the parameter for mode_normal_cfg ...
[2020-01-18 20:06:04]
trulala69 :
Just in case someone is interested, found/googled a complete parameter list [https://gist.github.com/sin5678/543ab7ad63d598eaae30fd7330a365ee](https://gist.github.com/sin5678/543ab7ad63d598eaae30fd7330a365ee)
[2020-01-19 03:09:32]
cadbob :
LOL, one would wish
[2020-01-19 08:23:13]
nopcode :
@trulala69: can all these be changed?!
[2020-01-19 08:54:18]
asdrubale :
If you need Excel version with also différence From fw parameter comparaison
[2020-01-19 08:55:16]
asdrubale :
[2020-01-19 09:10:15]
trulala69 :
@nopcode Some can, some cannot ...
[2020-01-19 09:11:02]
trulala69 :
@asdrubale Thanks, I'll try to work through the italian comments (my italian is really bad) ...
[2020-01-19 09:18:00]
asdrubale :
Take a look on all excel file
[2020-01-19 10:08:03]
trulala69 :
Working my way through it, thanks again, very helpful although I can't find eg g_config.mode_sport_cfg.tilt_atti_range on the MMINI ...
[2020-01-19 10:30:37]
trulala69 :
Hmm, I can change some common parameters, but I found g_config.misc_cfg.follow_gimbal_yaw_en with list for example, but when I try to get/set this parameter i get unrecognized response ... I guess they've changed somethimng which unfortunately isn't implemented in the tool yet...
[2020-01-19 18:36:57]
heresmydron :
anyone knows how to unscramble the fc_log.log that the mini writes in the sd card? any useful information there? im looking to extract the flight data recorded byt the bird
[2020-01-19 19:01:46]
validat0r :
Probably not
[2020-01-19 23:09:27]
jcase :
@heresmydron probably, unless they changed the key
[2020-01-19 23:10:01]
jcase :
Send me it
[2020-01-20 12:32:28]
heresmydron :
any chance i could get the key from you and try to decrypt it locally first?
[2020-01-20 14:55:43]
jcase :
nope
[2020-01-20 14:55:47]
jcase :
that isnt going to happen
[2020-01-21 04:25:32]
hazardc :
it was worth checking in just to read the last bit of banter :smile:
[2020-01-21 11:24:45]
cantrepeat :
hardly
[2020-01-23 20:09:39]
heresmydron :
anyone here already played with `vert_vel_down_adding_max_0` and `g_config.mode_sport_cfg.vert_vel_down_0` set to -10? i see no difference compared to the default values
[2020-01-23 20:10:31]
heresmydron :
im looking to increase the downwards speed, and AFAIK, both params should be at -10 but nothign changed from what i can see
[2020-01-23 20:28:22]
heresmydron :
PROTIP: Dont take off with the sensors covered in a closed space. Bird will keep going up until it hits the ceiling of the room :/
[2020-01-23 23:35:48]
cantrepeat :
We'll need the video to confirm!!
[2020-01-23 23:47:51]
heresmydron :
hehhe i already learned my lesson
[2020-01-24 08:07:08]
validat0r :
With the param set I gave you I get -10 down speed
[2020-01-24 21:32:42]
heresmydron :
im going to try it out tomorrow in the fields, might the sensors messing up with the speed because i tried it indoors
[2020-01-26 11:07:53]
trulala69 :
@ilovemynexus4 can you share how you pushed the rth speed? By changing the max tilt? Or something else? I can't find the old rth vel params on the mini ...
[2020-01-26 21:13:04]
piranha :
Its not true, I fly it with no problem
[2020-01-26 21:15:23]
piranha :
No problem with covered sensors indoors or outdoors
[2020-01-26 23:53:06]
heresmydron :
not sure why, but i covered my mini with a piece of paper and the drone started going up and up... even when i grabbed it started to fight me to continue going up
[2020-01-27 18:29:56]
piranha :
Just cover it with tape and try again
[2020-02-12 04:56:54]
kilrah :
hmm can't seem to edit params with comm_og_service_tool.py, always get an error both on get and on set... did it stop working with the later firmwares?
[2020-02-12 06:44:32]
trulala69 :
For me only —alt option works...
[2020-02-12 07:26:06]
validat0r :
I'm still in initial f/w .. What line are you using exactly?
[2020-02-12 07:50:02]
trulala69 :
Commandline?
[2020-02-12 08:00:07]
kilrah :
e.g. `python comm_og_service_tool.py com22 MMINI FlycParam get g_config.flying_limit.avoid_ground_and_smart_landing_enable`
[2020-02-12 08:01:25]
kilrah :
this gives `Error: Unrecognized response to read parameter value by hash request.`
[2020-02-12 08:02:13]
kilrah :
`python comm_og_service_tool.py com22 MMINI FlycParam set g_config.flying_limit.avoid_ground_and_smart_landing_enable 0` gives `Error: 'DJIPayload_FlyController_GetParamInfoEOL2015Re' object has no attribute 'type_id'`
[2020-02-12 08:04:31]
kilrah :
aha, --alt seems to work, didn't know about it
[2020-02-12 08:05:22]
kilrah :
well at least to get, set still gives `Error: this type has no size`
[2020-02-12 08:11:45]
kilrah :
```Parsed response - DJIPayload_FlyController_GetParamInfoU2017Re:
status: 0
table_no: 0
param_index: 756
type_id: 0
size: 1
limit_def: 1
limit_min: 0
limit_max: 1
name: b'g_config.flying_limit.avoid_ground_and_smart_landing_enable'
Error: this type has no size```
[2020-02-12 08:21:14]
kilrah :
hmm it chokes on `payload.param_value = (c_ubyte * sizeof(payload.param_value)).from_buffer_copy(param_val)`
[2020-02-12 08:21:26]
kilrah :
maybe a python version thing? I'm on 3.7.4
[2020-02-12 08:34:02]
trulala69 :
Jupp, please see <https://github.com/o-gs/dji-firmware-tools/issues/139> ... you've to change a class definition slightly ... accorcing to Mefistoteles it's a python bug, but the workaround fixes it ...
[2020-02-12 08:35:54]
trulala69 :
BTW on the MM only this cmdline works for me on a Mac (after fixing the above issue): python3 comm_og_service_tool.py /dev/tty.usbmodem14303 MMINI FlycParam set bat_enable_smart_bat_landing_protect 0 --alt
[2020-02-12 08:38:40]
kilrah :
oh cool, had just noticed it was only on the single byte values and located the def, thanks for the last bit :stuck_out_tongue:
[2020-02-12 08:39:44]
trulala69 :
Found that yesterday evening... I have to learn python ...
[2020-02-12 08:40:03]
trulala69 :
One day ...
[2020-02-12 08:40:09]
trulala69 :
If there is time ...
[2020-02-12 08:40:28]
kilrah :
guess this can be submitted then, seems to work fine
[2020-02-12 08:40:51]
trulala69 :
@ilovemynexus4
Can you share how you pushed the rth speed? By changing the max tilt?
Or something else? I can't find the old rth vel params on the mini ... Thanks ...
[2020-02-12 08:41:29]
kilrah :
`python comm_og_service_tool.py com22 MMINI FlycParam set --alt g_config.flying_limit.avoid_ground_and_smart_landing_enable 0`
[2020-02-12 08:41:50]
kilrah :
this works for me with --alt after the set
[2020-02-12 08:43:10]
trulala69 :
What does disabling `avoid_ground_and_smart_landing_enable` do?
[2020-02-12 08:43:54]
kilrah :
it's "landing protection"
[2020-02-12 08:44:44]
kilrah :
disables the "automated landing" thing at 30cm, you're in control until the ground
[2020-02-12 08:44:48]
kilrah :
so much better for hand catch
[2020-02-12 08:45:41]
kilrah :
doesn't jump up when you bring the hand under anymore etc
[2020-02-12 08:45:56]
kilrah :
yup works great
[2020-02-12 08:47:28]
kilrah :
atti works fine too, cool
[2020-02-12 09:21:04]
validat0r :
yeah, there was this funny python bug i found :smile:
[2020-02-12 09:22:28]
validat0r :
quite puzzling .. confirmed my suspicion that python is just weird
[2020-02-12 09:23:41]
validat0r :
[2020-02-12 09:24:41]
validat0r :
@trulala69 i'm working with these params .. I guess faster RTH has sth to do with go_home.avoid_enable
[2020-02-12 10:21:50]
trulala69 :
Wow, thanks, mate ...
[2020-02-12 10:23:23]
trulala69 :
@kilrah ahh, I see ... that's cool ... thanks, mate ...
[2020-02-12 10:26:39]
trulala69 :
60 degree max tilt in sport mode, ugh! ... I've set my bird to 45 and i get sweaty hands when it's braking from full forward speed :joy:
[2020-02-12 10:34:10]
validat0r :
I dont think you can take the value literally
[2020-02-12 10:35:07]
validat0r :
it's just the max value .. flying with it without any problems so far
[2020-02-12 10:35:18]
validat0r :
i dont think the ac really goes to 60°
[2020-02-12 10:39:17]
validat0r :
maybe there are other params which govern the max tilt angle, too .. idk
[2020-02-12 10:39:56]
validat0r :
like it is with max_down_vel ... there is a second param on mini which needs to be altered to get -10
[2020-02-12 10:41:17]
validat0r :
would like to see a more aggressive behavior .. as it is the mini is so prone to high wind speeds
[2020-02-12 10:51:04]
trulala69 :
Yes it is ... I recall there's also a max current parameter in MMs list, this might trigger all those warnings... Storm here, would be a chance to test ... better not ...
[2020-02-12 10:55:17]
validat0r :
yeah, damn this Sabine :d
[2020-02-12 11:01:30]
validat0r :
what warnings?
[2020-02-12 11:05:38]
trulala69 :
I thought I had seen a parameter which defines the max amount of current the MM can draw ...
[2020-02-12 11:05:51]
trulala69 :
Have to check that again ...
[2020-02-12 12:56:35]
kilrah :
came across that earlier as well
[2020-02-12 12:56:52]
kilrah :
go_home_current
[2020-03-12 18:43:16]
oakley75 :
Really, really wish that subtitle option in fly app gave more presented data, it be too much happiness to have some gps-related data embedded there. DJI is so damn skilled at shattering hope
[2020-04-03 18:56:19]
validat0r :
lol .. /usr/bin/dji_nail
[2020-04-03 20:12:57]
heresmydron :
is that a dump of the firmware or a dump of a live mini? wondering if someone got adb access to it
[2020-04-03 21:44:11]
jcase :
yes thats in the firmware
[2020-04-04 09:01:23]
validat0r :
I think it's a dump of a live mini
[2020-04-04 10:28:54]
heresmydron :
looks like it
[2020-04-07 23:01:01]
jcase :
Does anyone have the register address info for the MIMXRT1061DVL6A from the mini?
[2020-04-09 20:04:36]
heresmydron :
fun fact, if you push the mini into an authorization zone (physically pushing it, with your fingers) it will fight you and if you stop pushing it will slowly back up
[2020-04-09 20:05:48]
heresmydron :
i live at the edge of an auth zone and verified this personally today, caught me by surprise (and it almost catches my fingers!)
[2020-04-09 22:25:56]
oakley75 :
The mental picture of that is great
[2020-04-12 19:05:03]
heresmydron :
is anyone here using the fly app 1.0.8 with firmware .200? I want to keep mine at the lowest firmware possible but use the latest app at the same time... wondering if the app will force the drone to update.
[2020-04-12 19:05:29]
heresmydron :
FYI im using a dedicated phone to fly the drone, which doesnt have an active connection at all, so no pings from/to DJI
[2020-04-12 19:05:41]
heresmydron :
still wonder if they baked "minimal" firmware versions in the app
[2020-04-12 19:07:43]
validat0r :
i'm using a app which was released when .200 was released with .000; same setting: no internet connection, and it works fine
[2020-04-12 19:08:05]
heresmydron :
but what about the latest app? are you using it with your .200 drone?
[2020-04-12 19:08:15]
validat0r :
my drone is on 000
[2020-04-12 19:08:35]
validat0r :
the app hasn't been updated for some time though
[2020-04-12 19:08:58]
heresmydron :
i want the manual white balance feature that is available on 1.0.8 but too scared to update it :confused:
[2020-04-12 19:10:26]
validat0r :
i ran into the problem that I had to send a special duml to the AC to release the drone from being grounded after not upgrading the fw .. but apart from that there was no caveat of just trying it
[2020-04-12 19:11:01]
heresmydron :
uhhhh how did you do that?
[2020-04-12 19:11:23]
heresmydron :
ive noticed that theres a variable in dji assistant coming from the drone called "NEEDS_UPDATE"
[2020-04-12 19:11:45]
heresmydron :
which im sure is the one that grounds it if it knows theres an update
[2020-04-12 19:11:57]
validat0r :
if the ac is grounded due to not upgrading the fw / nfz, you'd need that duml
[2020-04-12 19:12:09]
validat0r :
it can be easily cleared
[2020-04-12 19:12:45]
heresmydron :
is that duml a secret or something you can share here?
[2020-04-12 19:13:29]
validat0r :
no secret, just have to look for it .. if you run into that problem, just drop me a line
[2020-04-12 19:13:59]
heresmydron :
alright thanks
[2020-04-12 20:41:31]
heresmydron :
thanks @reoak
[2020-04-12 21:23:37]
heresmydron :
confirmed, drone on .200, app on 1.0.8, no forced updates
[2020-04-12 21:24:02]
heresmydron :
tapping the "unlock geo zones" gives me a "firmware not compatble" error
[2020-04-12 21:54:03]
oakley75 :
I think that'll only happen at .400
[2020-04-13 14:42:29]
heresmydron :
youre right according the release notes of .400
[2020-04-15 22:58:38]
heresmydron :
```➜ bin strings dji_navigation | grep nfz
nav_flight_update_nfz_height_limit
nav_flight_get_nfz_height_limit
nav_v1_security_check_nfz_cross
: nav nfz cross enquiry send fail %d
: nav nfz cross enquiry result fail %d
: nav nfz corss enquiry success
nav_flight_update_nfz_height_limit
nav_v1_security_check_nfz_cross
nav_flight_get_nfz_height_limit
_ZN16navi_sensor_data20get_nfz_height_limitEv
nav_flight_nfz_polygon_enquiry```
[2020-04-15 22:59:05]
heresmydron :
`nav_v1_security_check_nfz_cross` and `nav_flight_nfz_polygon_enquiry` look interesting
[2020-04-15 23:04:03]
heresmydron :
super weird that they didnt strip the binary before shipping the firmware right?
[2020-04-15 23:15:02]
jcase :
@heresmydron most of them are stripped, one wasnt
[2020-04-16 08:34:37]
heresmydron :
first time poking around a mavic but dji_navigation seems the one that handles... well, navigation, and this one isnt stripped. amazing! makes reveng so much easier
[2020-04-16 09:04:29]
bin4ry :
yep they tend to "forget" stripping sometimes
[2020-04-16 09:04:33]
bin4ry :
which makes reversers happy :smile:
[2020-04-20 08:54:49]
theoa :
Are the mini binaries available somewhere public? I tried unpacking the firmware but missing the UFIE key, same as mavic 2 :disappointed:
[2020-04-20 09:22:01]
bin4ry :
[https://dji-rev.slack.com/files/U65J98H7Y/F0110UHJT5F/mavicmini-01.00.0400-dump.zip](https://dji-rev.slack.com/files/U65J98H7Y/F0110UHJT5F/mavicmini-01.00.0400-dump.zip)
[2020-04-20 09:22:22]
bin4ry :
but pwd is only handed out of you are willing to contribute openly
[2020-04-20 09:27:16]
theoa :
Yeah, of course. I don't really know how much help I'll be but I'll try. Researched a bit of the mavic 1 upgrade system on dji_sys when I had one, but it broke and now I got a mini and time with the quarantine :smile: Figured out this one doesn't have ftp for upgrade, guess it's through serial, but didn't have the binaries to look into it
[2020-04-20 09:28:40]
theoa :
Don't really have too much of a target with this for now, and I can't really go out and fly it so might as well just research some
[2020-04-20 15:05:38]
jcase :
mp1 upgrade syustem was SOOOOO fucked
[2020-04-20 15:05:40]
jcase :
lol
[2020-04-20 15:05:41]
jcase :
you couldnt look at it without hhitting a vuln
[2020-04-23 00:29:57]
jcase :
what ip do i need to assign ti my interface to connect to the mavic mini rc ?
[2020-04-23 00:30:08]
jcase :
i need to telnet in and sniff some data
[2020-04-23 00:36:39]
whitey12884 :
@jcase this is justinswidebody from the mavic pilots forum... I have a mavic air that might be on .300. I'll check and if so, I'll send it your way...
[2020-04-23 00:38:24]
jcase :
lmk what you want for it
[2020-04-23 00:41:05]
whitey12884 :
NVM it's on .0400 sorry
[2020-04-23 00:41:54]
jcase :
no worries
[2020-04-23 00:41:56]
jcase :
its a long shot
[2020-04-23 00:44:14]
whitey12884 :
I still have a few minis that are on .100 never flown if those will help with anything
[2020-04-23 00:50:59]
jcase :
192.168.3.10
[2020-04-23 00:51:04]
jcase :
@whitey12884 you have done more than enough
[2020-04-23 00:51:20]
jcase :
i dont need more minis, ive got enough broken ones to probably build a couple working ones
[2020-04-23 00:51:26]
jcase :
at this point
[2020-04-23 00:51:46]
jcase :
(not kidding)
[2020-04-23 00:52:02]
whitey12884 :
Lol ha ha... Hopefully you had some fun with them and didn't just break them trying to get into the system
[2020-04-23 00:52:23]
jcase :
i did crash one lol
[2020-04-23 00:52:33]
jcase :
but that stilll works
[2020-04-23 00:53:05]
whitey12884 :
Nice! Lol well thanks for all you do man I appreciate it
[2020-04-23 04:40:54]
bin4ry :
@jcase
```rc ip: 192.168.3.10```
--> PM
[2020-04-23 04:41:12]
jcase :
Yep thanks
[2020-04-23 04:41:15]
jcase :
I got it
[2020-04-23 08:48:30]
heresmydron :
does that mean that the drone acts as the wifi hotspot and the RC connects to it?
[2020-04-23 08:49:09]
heresmydron :
how do you know which SSID the RC will connect to?
[2020-04-23 09:53:18]
validat0r :
It's an adhoc connection ac-rc
[2020-04-23 09:53:57]
validat0r :
When they're paired a shared wep key is negotiated
[2020-04-23 10:18:54]
pingspike :
Mavic Mini firmware v01.00.0500 is now available - <https://dl.djicdn.com/downloads/Mavic_Mini/20200423/Mavic_Mini_Release_Notes_en.pdf>
[2020-04-23 11:19:03]
heresmydron :
cool thanks @ilovemynexus4 ill see if i can sniff traffic today
[2020-04-23 11:23:16]
validat0r :
Do try that
[2020-04-23 15:59:02]
whitey12884 :
@jcase I have read that the smart controller can be hacked to turn up the transmitting and receiving power.... Is this possible on the wifi controllers at all? (Mini,air, and spark?)
Sorry if it has been asked already
[2020-04-23 15:59:34]
jcase :
id assume so
[2020-04-23 15:59:38]
jcase :
but not something ive looked at
[2020-04-23 16:00:49]
whitey12884 :
Hmmmm any way I can entice you to look into it? Lol
[2020-04-23 16:10:13]
whitey12884 :
Better yet does anyone know of a way to get a mini to fly off LTE by bridging the networks? Or if it would even be possible without using 2 raspberry pies?
[2020-04-23 16:15:16]
bin4ry :
mini controller can be "powered up"
[2020-04-23 16:16:00]
bin4ry :
it has a mode where it ignores zones and just powers up to its max value. this max value is different in FCC and CE version. but thats another thing
[2020-04-23 16:36:35]
e100at :
Hello to everyone, brand new and excited to be here. I see a lot of talent, experience and good work in all the old posts. I have been reading for several days.
I would appreciate any information about increasing the power for DJI Fly.
[2020-04-23 16:39:07]
validat0r :
Spoof to the US with your smartphone, connect the drone but shield the top from GPS signal, remove shield, arm the AC, wait for GPS lock, and have fun
[2020-04-23 16:55:12]
e100at :
@ilovemynexus4 Thanks, I am aware of that. To get the right answer I have to ask the right question.
For a FCC MM - I would like to increase the power to 1.5 watts, like DJI boost, or 4 watts if it can be possible?
[2020-04-23 17:17:34]
validat0r :
Nah
[2020-04-23 17:28:47]
e100at :
@ilovemynexus4 Nah = impossible?
[2020-04-23 17:47:24]
validat0r :
Yeah .. Boost is a Mav1 feature.
[2020-04-23 18:07:25]
e100at :
Thank you @ilovemynexus4 , I appreciate your response.
Could it be possible to fly a mini with a Mav1 controller?
[2020-04-23 18:10:34]
heresmydron :
Youre talking about the fcc hack right, or is there something else?
[2020-04-23 18:12:17]
validat0r :
No
[2020-04-23 18:12:45]
validat0r :
AC's GPS location overrides dji fly
[2020-04-23 18:16:03]
bin4ry :
more like powermode. fcc and ce have different hardware. fcc has only 5G but an bigger amp on it. ce has 2.4 and 5g with smaller amps.
so you always get one downside.
this is the comparison i have in my notes
———————————————————
Notes on the powerlevels:
Maximum reachable txpower with CE hardware 2.4G --> 31mW 5.8G --> 15mW
Maximum reachable txpower with FCC hardware 2.4G --> none (removed hardware support for 2.4G) 5.8G --> 151mW
Freefield damping f^2 --> 5.8^2/2.4^2 = 5.84
---> 5.8G needs 5.84 higher txpower to reach the same range as 2.4G.
===> ce on low channel has a higher range than FCC can do (in optimal conditions)
———————————————————
[2020-04-23 18:18:13]
bin4ry :
but we have no choice. they changed the hardware, all we can do is flip it out of country modes to „powermode“ (which is kinda like small boost mode for mini, hence why i call it „powermode“) :smile:
[2020-04-23 18:19:24]
bin4ry :
do you have the mini? @heresmydron
[2020-04-23 19:15:59]
heresmydron :
TIL, I assumed the app was deciding whether to use FCC or CE. I've been flying CE mode all the time while thinking i was in FCC
[2020-04-23 19:17:57]
validat0r :
it is. hence it switches the drone to FCC while it thinks it's in FCC country, but wont switch it back to CE after you've armed it
[2020-04-23 19:19:26]
heresmydron :
i do, in .200, and i bought a broken one that im planning to mess around. I think that one is on .400, ill know once it arrives (if it ever arrives)
[2020-04-23 19:22:26]
heresmydron :
crap, that messes up my "stealth" mode. I ve been flying around the city, spoofing location at home, turning AC and RC, waiting for GPS lock (more like assuming) and taking off and away from me as fast as possible. It is legal to fly where I am but all the noise attracts unwanted attention... Having to wait for GPS lock while armed is going to definitely attract attention... Another reason to find a way to disable all these silly measures from dji!
[2020-04-23 19:24:30]
validat0r :
yeah, well .. happy hunting
[2020-04-23 19:24:49]
validat0r :
mini isn't that noisy ..
[2020-04-23 23:15:10]
whitey12884 :
@heresmydron if I can help supply anything to help with the mavic mini progress please let me know.... On the hardware side, not software
[2020-04-24 00:43:41]
whitey12884 :
So are you saying that the max power up value is more than what it is in its natural state?
For instance I have FCC 5.8ghz rc... Am I able to increase it's watts past what it will do stock in powermode?
[2020-04-24 00:44:39]
whitey12884 :
Don't know if anyone is interested but this is my long range round trip with the mini
[https://youtu.be/xG0IcYtRwHo](https://youtu.be/xG0IcYtRwHo)
[2020-04-24 09:03:01]
heresmydron :
If i understood @bin4ry correctly, theres one extra boost you can do besides FCC hack, but no idea how to activate it. @bin4ry if you can share it, please do!
[2020-04-24 09:08:41]
heresmydron :
what did you mod to achieve that range?
[2020-04-24 10:00:27]
bin4ry :
i don’t remember how it will increase fcc models, but yes it should just pump up the tax power to the hardcoded possible power of the driver
[2020-04-24 10:23:46]
validat0r :
[2020-04-24 10:24:28]
validat0r :
in the comments he said mav pro bat + spark bat as power source
[2020-04-24 10:25:47]
validat0r :
amazing what you can do when do even when you hide behind trees and houses
[2020-04-24 10:26:56]
validat0r :
@whitey12884 care to post a pic of your AC setup?
[2020-04-24 10:32:20]
validat0r :
I'm amazed the mini could carry the two bats .. stripped of all external housing?
[2020-04-24 10:36:09]
validat0r :
dji fly is showing bat temperature .. is bat telemetry of mav/spark bat compatible with mini bat?
[2020-04-24 11:05:34]
bin4ry :
i won't share it public
[2020-04-24 12:19:11]
whitey12884 :
Yes I'll show pictures in a few... Keep in mind I have it running on 3s instead of 2s.... The spark bms shows all telemetry like stock...
However the only way to do this is to activate the mini with a stock battery, then plug in a external battery (mavic pro bat) and then plug in the internal battery with bms (spark battery).
[2020-04-24 12:20:07]
whitey12884 :
I also have 2s version carrying 4 mavic pro cells.
However I use mavic air motors with master air screw props
[2020-04-24 12:20:21]
whitey12884 :
I have managed up to a 74min hover time
[2020-04-24 12:23:34]
whitey12884 :
[2020-04-24 12:23:52]
whitey12884 :
At the moment I'm only running the top two antennas with 2 2watt sunhan amps
[2020-04-24 12:25:31]
validat0r :
This is my kind of insanity :smile:
[2020-04-24 12:26:13]
validat0r :
@lowellfoo780 would love that
[2020-04-24 12:26:16]
lolo780 :
@lowellfoo780 has joined the channel
[2020-04-24 12:27:47]
whitey12884 :
[2020-04-24 12:27:53]
whitey12884 :
Air motors with spark props
[2020-04-24 12:28:07]
whitey12884 :
Spark props are over pitched
[2020-04-24 12:28:21]
whitey12884 :
(twisted to add more pitch)
[2020-04-24 12:30:42]
whitey12884 :
[2020-04-24 12:32:11]
whitey12884 :
[2020-04-24 12:40:00]
validat0r :
Awesome
[2020-04-24 12:40:44]
validat0r :
Seems to be a great frame to mod
[2020-04-24 12:41:41]
validat0r :
Did you mod the antennas on the ac?
[2020-04-24 12:53:28]
whitey12884 :
No not at all
[2020-04-24 13:11:33]
whitey12884 :
[https://youtu.be/B-XbNquu8sA](https://youtu.be/B-XbNquu8sA)
[2020-04-24 13:16:52]
heresmydron :
understandable
[2020-04-24 13:19:34]
heresmydron :
found this commadn on adb to prevent apps from vibrating ``cmd appops set dji.go.v5 VIBRATE ignore``
[2020-04-24 13:19:47]
heresmydron :
in theory it will disable the "strong wind warning" vibration introduced in 1.0.8
[2020-04-24 13:20:28]
heresmydron :
couldnt try it yet, i did disable it on my phone but no matter how hard i shook the mini, the stupid warning didnt pop up
[2020-04-24 13:31:49]
whitey12884 :
[2020-04-24 13:32:01]
whitey12884 :
@heresmydron that would be great to get rid of that warning
[2020-04-24 13:40:15]
validat0r :
That would be a totally unheard way of manipulating that kind of behaviour.
[2020-04-24 13:52:53]
validat0r :
In spark/mavic you'd change the high_wind param on the FC
[2020-04-24 13:56:06]
whitey12884 :
I've been meaning to decompile the fly app and see what all I could find in it
[2020-04-24 13:56:17]
whitey12884 :
I still have the original app version .100
[2020-04-24 13:59:42]
jcase :
@whitey12884 its built with 64bit secneo
[2020-04-24 14:04:54]
whitey12884 :
Well then that's above my skills lol... I miss the old days
[2020-04-24 14:23:40]
whitey12884 :
Awesome, thanks for the information @bin4ry
[2020-04-24 16:56:32]
heresmydron :
@whitey12884 it wont get rid of the warning, it will just disable the vibration... in theory, i flew today around my area but wind was very calm and no warning was thrown
[2020-04-24 17:09:52]
whitey12884 :
Strange thing is I don't recall ever feeling any vibrations
[2020-04-24 17:19:48]
heresmydron :
it was introduced in 1.0.8
[2020-04-24 18:04:49]
whitey12884 :
Ahhh that's why ... Makes sense
[2020-04-25 08:28:11]
bin4ry :
[2020-04-25 08:35:02]
bin4ry :
[2020-04-25 08:35:23]
cs2000 :
@cs2000 has joined the channel
[2020-04-25 08:35:28]
bin4ry :
@cs2000
[2020-04-25 08:54:56]
heresmydron :
```root:$1$$zdlNHiCDxYDfeF4MZL.H3/:10933:0:99999:7:::```
[2020-04-25 08:54:58]
heresmydron :
```Admin:$1$$zdlNHiCDxYDfeF4MZL.H3/:10933:0:99999:7:::```
[2020-04-25 08:55:09]
heresmydron :
password is `5up`
[2020-04-25 08:57:35]
validat0r :
Uhm, thats mini RC, right?
[2020-04-25 08:58:07]
heresmydron :
yeah im checking hte files on rc_160
[2020-04-25 08:58:09]
bin4ry :
yes
[2020-04-25 09:01:47]
bin4ry :
@heresmydron see PM
[2020-04-25 09:38:56]
validat0r :
@heresmydron funny detail indeed, but not very useful in the end :smile:
[2020-04-25 10:07:55]
heresmydron :
yeah seems to be atheros default password, that hash is everywhere if you google it
[2020-04-25 13:05:40]
jcase :
the password isnt used
[2020-04-25 13:36:29]
poopnondji :
Same as with autel login with root doesn’t require pw but the pw is “cautel”
[2020-04-25 13:57:49]
trulala69 :
Hi, I've upgraded AC to 0500 and tried to set some parameters via the ogs tools, which worked flawless on 0300, but now: comm_og_service_tool.py /dev/$MODEM MMINI FlycParam set g_config.mode_sport_cfg.tilt_atti_range_0 60
mode_sport_cfg_tilt_atti_range = 30.000000 range = < 10.000000 .. 30.000000 >
[2020-04-25 13:57:56]
trulala69 :
Am I missing something?
[2020-04-25 13:58:07]
trulala69 :
--alt doesn't work btw ...
[2020-04-25 14:03:06]
validat0r :
Range is 10 to 30 .. Could you set 60 before?
[2020-04-25 14:03:13]
validat0r :
I have to check my notes..
[2020-04-25 14:03:36]
trulala69 :
Not on 0500 .. I was on 0300 and there it worked ... damn ..
[2020-04-25 14:03:55]
trulala69 :
Thinking about downgrading again ...
[2020-04-25 14:05:48]
validat0r :
Maybe test it first if the speed in sportmode really decreased
[2020-04-25 14:08:23]
trulala69 :
I was flying in P-Mode on 0500 today and I set the params yesterday, but it seems they weren't set, because it flew like default ...
[2020-04-25 14:08:48]
validat0r :
Yeah .. In my notes on f/w .000 30 is default, Max is 60
[2020-04-25 14:09:23]
trulala69 :
Well, ok, I get it ... the range has been cut down...
[2020-04-25 14:10:28]
validat0r :
One would have to check if the behaviour really is different.
[2020-04-25 14:11:10]
validat0r :
Could you print all params on .500 and send them to me?
[2020-04-25 14:11:31]
validat0r :
There are a few others I'd like to check
[2020-04-25 14:14:01]
trulala69 :
Sure, I've exported them to CSV. Where do you want them?
[2020-04-25 14:15:07]
validat0r :
Maybe just upload them here. I think there's no private data in them
[2020-04-25 14:16:04]
trulala69 :
[2020-04-25 14:16:10]
trulala69 :
Here you go ...
[2020-04-25 14:18:04]
trulala69 :
Seems they've stripped some vars as well ... on 0300 I have 651 vars and 0500 has 606 now ...
[2020-04-25 14:20:55]
validat0r :
maybe diff the two csv files
[2020-04-25 14:23:07]
validat0r :
cant find the mode_sport_cfg_tilt_atti_range param in the file
[2020-04-25 14:25:00]
trulala69 :
Just diffed 0300 with 0500 and the list is long ...
[2020-04-25 14:25:47]
validat0r :
Not sure you got all params with .500
[2020-04-25 14:26:18]
trulala69 :
Maybe true as I get a lot of new errors using the ogs tools on 0500 ...
[2020-04-25 14:26:41]
validat0r :
Maybe there's other new incompatibilities
[2020-04-25 14:27:05]
validat0r :
I won't upgrade in the nearer future so can't help youtl there
[2020-04-25 14:28:16]
trulala69 :
I'm about to downgrade again ... I dunno if I go with 0300 or 0400 ... thanks anyway ...
[2020-04-25 14:34:18]
trulala69 :
Just did a list again. No change, but as lot of Indexes end up wit "Response on parameter 1245 indicates end of list despite larger size reported."
[2020-04-25 14:35:57]
validat0r :
Maybe sth @mefisto can look into
[2020-04-25 14:36:02]
mefisto :
@mefisto has joined the channel
[2020-04-25 14:37:40]
trulala69 :
Hopefully, because I tried to find a reason for these messages, but I realized, this is way above my knowledge unfortunately ...
[2020-04-25 14:53:20]
mefisto :
The message:
"Response on parameter [0-9]+ indicates end of list despite larger size reported."
was already there even in Air. I assume it's some kind of additional security mechanism - if you're not authorized, you can't access some params.
Would have to check the TrustZoned firmware for conditions when this happens.
[2020-04-25 15:08:50]
trulala69 :
Anything we can do to support?
[2020-04-25 22:38:33]
whitey12884 :
[https://youtu.be/1CNWmpBMcGs](https://youtu.be/1CNWmpBMcGs)
[2020-04-25 22:38:53]
whitey12884 :
Here's my latest flight, I could have and should have went further
[2020-04-26 07:16:19]
validat0r :
Drop me a link to your next live event
[2020-04-26 07:16:38]
validat0r :
Amazing flight btw
[2020-04-26 16:08:27]
whitey12884 :
[2020-04-26 16:16:19]
whitey12884 :
[https://www.youtube.com/channel/UCFkujOXRZb2Az8fUeD5tiMA/live](https://www.youtube.com/channel/UCFkujOXRZb2Az8fUeD5tiMA/live)
[2020-04-26 16:16:33]
whitey12884 :
I might go live again in about 2 hours
[2020-04-26 16:52:10]
validat0r :
Awesome.
[2020-04-26 22:53:56]
tombayne01 :
Hi guys
[2020-04-27 08:55:29]
heresmydron :
hello
[2020-04-27 12:27:06]
e100at :
For what it’s worth @trulala69 and @ilovemynexus4 before the Virus, I did a lot of test flights changing parameters, sport, tilt... 10 - 60, default 30. Above 45 I saw no difference. My conclusion, because of insufficient power/force after 45 was diminishing returns. My Minis are on .200 and .300
[2020-04-27 12:56:18]
validat0r :
I tend to be with you on that.
[2020-04-27 13:58:42]
trulala69 :
I guess you’re right.
[2020-04-27 16:28:51]
whitey12884 :
[https://youtu.be/IhlV36_NPyk](https://youtu.be/IhlV36_NPyk)
[2020-04-27 17:03:16]
validat0r :
that footage is fast :smile:
[2020-04-27 17:04:29]
validat0r :
12.9 km .. that's far for such a little bird
[2020-04-27 17:05:50]
validat0r :
still amazed you have wifi reception that far away being only 500m up and hiding behind the bushes
[2020-04-28 23:25:28]
whitey12884 :
@ilovemynexus4 I got even further , but I didn't charge my batterys enough... I can go even further....
[https://youtu.be/i-VlVS3pE2Y](https://youtu.be/i-VlVS3pE2Y)
[2020-04-29 07:45:50]
heresmydron :
nice! were you able to recover it?
[2020-04-29 07:47:59]
validat0r :
Lol .. Emergency landing on a parking lot?
[2020-04-29 07:48:23]
validat0r :
Never had to do that yet thank god
[2020-04-29 07:51:16]
validat0r :
Oh, well, sth similar. Went up with an empty bat. Bird came down 20 sec after take off, hitting the only green patch on a parking lot. So I'd gone for sth not as hard as concrete.
[2020-04-29 13:03:28]
asdrubale :
Someone unfortunately verify if dji introduce antirollback for mini fw in the latest 01.00.0500 ? I am afraid to lost possibility to go down up to 0200 if I update with assistant to 0500.
[2020-04-29 13:06:53]
bin4ry :
look yourself
[2020-04-29 13:07:15]
bin4ry :
download firmware from ddd and open the cfg sig file in an editor
[2020-04-29 13:24:12]
oakley75 :
I went down to 300 after 500 using assistant if that helps. Been concerned they modified 300 to kill the parameters liked on 500...
[2020-04-29 14:54:18]
trulala69 :
I went down from 500 to 400 for the same reason ... they've already withdrawn 300 ...
[2020-04-29 15:02:57]
oakley75 :
Damn that was quick to remove
[2020-04-29 15:19:49]
trulala69 :
Yep... just out of curiosity, what parameters did you change? Up/down Speeds, tilts ...
[2020-04-29 15:20:24]
oakley75 :
Up down velocities only
[2020-04-29 15:22:50]
asdrubale :
On 0500 , you cannot put no-dji-battery , the parameter is visible but they change min-max so you can put jut 1 = dji battery
[2020-04-29 15:34:10]
asdrubale :
On 0500 dji change several min&max to block the possibility example they reduce max value in atti-range in normal and sport mode and max - min vel-up and vel down
[2020-04-29 16:07:20]
softice :
Hi @heresmydron did you have any success with that? I can set the channel manually in the app, but I don't see anything when doing an active scan from my PC on that particular channel...
[2020-04-29 16:07:55]
softice :
@ilovemynexus4 you're saying it's an adhoc Wi-Fi connection. do you have more information on it?
[2020-04-29 16:08:26]
softice :
(@e100at @whitey12884)
[2020-04-29 16:11:52]
validat0r :
Sure. What ya wanna know?
[2020-04-29 16:17:57]
asdrubale :
Min value changed
[2020-04-29 16:19:34]
asdrubale :
Max value Changed
[2020-04-29 16:21:35]
softice :
cool. well first of all if it's possible to connect with a commodity wifi chipset to it. if I scan the channel configured from my PC, I can't even see any traffic.
[2020-04-29 16:28:39]
whitey12884 :
Yes I recovered it, it was perfectly fine patiently waiting on me
[2020-04-29 16:28:48]
whitey12884 :
[2020-04-29 16:29:34]
whitey12884 :
@jcase might know something
[2020-04-29 16:30:21]
jcase :
certain athrtos chips can get on that channel
[2020-04-29 16:30:25]
jcase :
with the right drivers
[2020-04-29 16:32:51]
softice :
alright, thanks. I guess you were able to connect to it then?
[2020-04-29 16:33:39]
softice :
can you point me into the right direction, e.g. a specific atheros chipset that supports it?
[2020-04-29 16:37:52]
softice :
Atheros AR9271?
[2020-04-29 16:55:39]
validat0r :
You lucky duck .. Amazing
[2020-04-29 16:56:11]
validat0r :
Ah, yet another kind if props?
[2020-04-29 17:03:28]
whitey12884 :
No, I do the long distance with a stock mini... So everything stock except I'm running 3s batteries
[2020-04-29 17:14:56]
trulala69 :
@asdrubale yep, you're right. We saw the change of the parameter ranges a few days ago, which is unfortunate ...
[2020-04-29 17:31:49]
validat0r :
@asdrubale thanks for the comparison. Good work
[2020-05-01 06:33:35]
boris.plintovic :
maybe modulemix is possible
FC from 400 and others from 500. Result, parameters values remain and get new camera settings
hm?
[2020-05-01 06:38:25]
poopnondji :
Just got a mini today and was wondering if module mixing still worked
[2020-05-01 09:57:21]
validat0r :
Havent heard someone doing it .. Does dumldore even work with mini? @jezzab
[2020-05-01 09:57:24]
jezzab :
@jezzab has joined the channel
[2020-05-01 09:57:52]
cs2000 :
Unlikely that it does
[2020-05-01 12:47:26]
asdrubale :
dumldore 3.20 ? it is usable for mini ?
[2020-05-01 12:57:50]
bin4ry :
not sure try
[2020-05-01 13:39:49]
poopnondji :
Doubt it. Hasn’t been updated in a while
[2020-05-01 13:44:21]
poopnondji :
Should start a bounty for jezzeb to see if wants to add mini support.
[2020-05-01 13:44:31]
asdrubale :
My question was becuase doesn't function , maybe i lost some news .
[2020-05-01 15:53:26]
bin4ry :
or just do it yourself and publish it for the community :wink:
[2020-05-01 21:03:12]
poopnondji :
Wow the Mini handles pretty decent. Gonna change sport mode and take her back out :grin:
[2020-05-02 20:19:41]
poopnondji :
Ahh Ac has telnet and ftp I see
[2020-05-02 20:37:18]
validat0r :
Youve got telnet? You lucky duck
[2020-05-02 20:49:01]
poopnondji :
Yeah right lol
[2020-05-02 20:49:19]
poopnondji :
I’m months behind you guys
[2020-05-02 20:49:45]
poopnondji :
You got root?
[2020-05-02 20:49:54]
validat0r :
On the ac? No
[2020-05-02 20:51:06]
poopnondji :
I see Ac ftp pw protected but telnet is not
[2020-05-02 20:51:27]
validat0r :
Telnet to the ac? Are you sure?
[2020-05-02 20:51:50]
poopnondji :
Telnet doesn’t ask me for paw
[2020-05-02 20:51:54]
poopnondji :
Pw
[2020-05-02 20:51:56]
validat0r :
Ftp is open, but files are encrypted
[2020-05-02 20:52:04]
poopnondji :
Figured
[2020-05-02 20:52:06]
validat0r :
Don't no anything about telnet
[2020-05-02 20:52:28]
poopnondji :
When I tried ftp it asked for login
[2020-05-02 20:52:50]
poopnondji :
Both of my minis are on .400
[2020-05-02 20:53:02]
validat0r :
I'm still on .000
[2020-05-02 20:53:04]
poopnondji :
What firmware are you on
[2020-05-02 20:53:12]
validat0r :
So maybe telnet is new
[2020-05-02 20:53:13]
poopnondji :
Nice!
[2020-05-02 20:54:03]
validat0r :
What do you get via telnet?
[2020-05-02 20:57:00]
poopnondji :
Sent you a pm
[2020-05-02 22:40:57]
jcase :
@vdub804 ac is not pw protected really
[2020-05-02 22:41:02]
jcase :
its root with a blank passwored
[2020-05-02 22:49:11]
poopnondji :
Thanks jcase gonna check it now
[2020-05-02 22:53:22]
poopnondji :
Found stick sensitivity setting on the Ac gonna play around with that see if it actually works
[2020-05-03 06:06:56]
bin4ry :
@vdub804 telnet on the ac? You sure your don’t mean rc?
[2020-05-03 14:13:52]
poopnondji :
Yes on the Ac. “Telnet or nc 192.168.1.3 23”
[2020-05-03 14:17:59]
jcase :
thats not telnet
[2020-05-03 14:18:00]
jcase :
on ac
[2020-05-03 14:18:08]
jcase :
thats ftp
[2020-05-03 14:26:21]
poopnondji :
You’re right @jcase just ran namp and it says port 23 ftp
[2020-05-03 14:27:26]
bin4ry :
i was wondering already, yeah ftp is standard info. username root no pwd
[2020-05-03 19:42:14]
jcase :
if you have a mini, please check the ftp and see if it has any files starting with core-
[2020-05-03 19:42:21]
jcase :
i'd like them, even in encrypted form
[2020-05-03 19:43:35]
heresmydron :
no `core` files on mine
[2020-05-03 19:44:34]
heresmydron :
heres the tree structure of the folder
[2020-05-03 19:44:38]
heresmydron :
```├── flyctrl
│ ├── FLY037.DAT
│ ├── FLY038.DAT
│ ├── FLY039.DAT
│ ├── FLY040.DAT
│ ├── FLY041.DAT
│ ├── FLY042.DAT
│ ├── FLY043.DAT
│ ├── FLY044.DAT
│ ├── FLY045.DAT
│ ├── FLY046.DAT
│ ├── FLY047.DAT
│ ├── FLY048.DAT
│ ├── FLY049.DAT
│ ├── FLY050.DAT
│ ├── FLY051.DAT
│ ├── FLY052.DAT
│ ├── FLY053.DAT
│ ├── FLY054.DAT
│ ├── FLY055.DAT
│ ├── FLY056.DAT
│ ├── FLY057.DAT
│ ├── FLY058.DAT
│ ├── FLY059.DAT
│ ├── FLY060.DAT
│ ├── FLY061.DAT
│ ├── FLY062.DAT
│ ├── FLY063.DAT
│ ├── FLY064.DAT
│ ├── FLY065.DAT
│ ├── FLY066.DAT
│ ├── FLY067.DAT
│ ├── FLY068.DAT
│ ├── FLY069.DAT
│ ├── FLY070.DAT
│ ├── FLY071.DAT
│ ├── FLY072.DAT
│ ├── FLY073.DAT
│ ├── FLY074.DAT
│ ├── FLY075.DAT
│ ├── FLY076.DAT
│ ├── FLY077.DAT
│ ├── FLY078.DAT
│ ├── FLY079.DAT
│ ├── FLY080.DAT
│ ├── FLY081.DAT
│ ├── FLY082.DAT
│ ├── FLY083.DAT
│ ├── latest
│ └── PARM.LOG
├── flylog
│ └── fc_log.log
├── log
│ └── system
│ ├── current_time
│ ├── kernel.log
│ ├── kernel.log.1
│ ├── kernel.log.2
│ ├── kernel.log.3
│ ├── syslog.log
│ └── syslog.log.0
├── lost+found
└── perception_log
├── 100
│ ├── 55
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 101
│ ├── 56
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 102
│ ├── 57
│ ├── blame_image.img
│ ├── blame_image.img.1
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 103
│ ├── 58
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 104
│ ├── 59
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 105
│ ├── 60
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 106
│ ├── 61
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 107
│ ├── 62
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 108
│ ├── 63
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 109
│ ├── 64
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 110
│ ├── 65
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 111
│ ├── 66
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 112
│ ├── 67
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 113
│ ├── 68
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 114
│ ├── 69
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 115
│ ├── 70
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 116
│ ├── 71
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 117
│ ├── 72
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 118
│ ├── 73
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 119
│ ├── 74
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 120
│ ├── 75
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 121
│ ├── 76
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 122
│ ├── 77
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 123
│ ├── 78
│ ├── blame_image.img
│ ├── blame_image.img.1
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 124
│ ├── 79
│ ├── blame_image.img.1
│ ├── blame_image.img.2
│ ├── blame_image.img.3
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 125
│ ├── 80
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 126
│ ├── 81
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 127
│ ├── 82
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 128
│ ├── 83
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
├── 98
│ ├── 53
│ ├── blame_image.img
│ ├── cnn_output.log
│ ├── config.txt
│ ├── tof.dat
│ ├── vio.dat
│ └── wm160.log
└── 99
├── 54
├── blame_image.img
├── blame_image.img.1
├── blame_image.img.2
├── cnn_output.log
├── config.txt
├── tof.dat
├── vio.dat
└── wm160.log
37 directories, 280 files```
[2020-05-03 20:28:30]
heresmydron :
not sure if im going somewhere, but the ftpd could be potentially vunerable to directory traversal exploits
[2020-05-03 20:28:33]
heresmydron :
check this out
[2020-05-03 20:28:37]
heresmydron :
```cwd /tmp/blackbox/log/
200 OK
pwd
257 "/tmp/blackbox/log"
cwd ../
200 OK
pwd
257 "/tmp/blackbox/log/.."
cwd log
200 OK
pwd
257 "/tmp/blackbox/log/../log"
cwd ../
200 OK
pwd
257 "/tmp/blackbox/log/../log/.."```
[2020-05-03 20:37:02]
heresmydron :
mmmm
[2020-05-03 20:37:07]
heresmydron :
```pwd
550 unavailable
425 Value too large for data type```
[2020-05-03 20:37:22]
heresmydron :
that happened after sending a really large string of `././././././`
[2020-05-03 22:10:14]
jcase :
@heresmydron based on the source code it isnt
[2020-05-03 22:10:36]
jcase :
<https://github.com/mtheall/ftpd>
[2020-05-03 22:10:44]
jcase :
while its been modifed a lot, that is the base
[2020-05-04 08:21:37]
heresmydron :
yeah i was cehcking dji_ftpd with ghidra, they added some safechecks to prevent you from going outside `/tmp/blackbox`
[2020-05-04 12:55:49]
jcase :
considering the shear number of ftp transversals we have done
[2020-05-04 12:55:50]
jcase :
yeah
[2020-05-04 12:55:51]
jcase :
lol
[2020-05-04 12:55:59]
jcase :
that was expected
[2020-05-06 01:13:44]
poopnondji :
@bin4ry can I get a copy of your mini dump? Would love to take a look at it. Thanks
[2020-05-06 01:17:11]
poopnondji :
The password I mean
[2020-05-06 12:55:37]
theoa :
Is there a way to decrypt the syslog files from the ftp?
[2020-05-06 14:35:00]
heresmydron :
not without the keys, which AFAIK are not public
[2020-05-06 14:52:51]
jcase :
yes
[2020-05-06 14:53:13]
jcase :
@ohad83 if you have a legit reasoan to decrypt them, DM me
[2020-05-06 23:12:22]
heresmydron :
has anyone had luck using qemu with the 0400 dump? running busybox gives me this error `/lib/ld-musl-armhf.so.1: Invalid ELF image for this architecture`
[2020-05-06 23:13:29]
heresmydron :
i guess that he issue is that qemu doesnt support `Cortex-M7` yet? did anyone try it already?
[2020-05-06 23:18:43]
jcase :
@heresmydron qemnu is a pita
[2020-05-06 23:18:45]
jcase :
use a rpi
[2020-05-07 08:24:20]
heresmydron :
smart, ill try that
[2020-05-08 22:30:17]
poopnondji :
Was able to get files off the rc, will upload in a few.
[2020-05-08 22:33:11]
jcase :
rc dump was already uploaded
[2020-05-08 22:33:13]
jcase :
wasnt it?
[2020-05-08 22:52:22]
poopnondji :
Ahh ok didn’t know
[2020-05-08 23:13:13]
jcase :
i think so
[2020-05-09 07:42:04]
heresmydron :
@vdub804 is your rc in the original firmware? dump posted here was for .500, might be interesting to see what they changed
[2020-05-09 07:42:08]
heresmydron :
heres the roiginal dump <https://dji-rev.slack.com/archives/CQ08J890D/p1587803291114100>
[2020-05-09 08:10:01]
bin4ry :
i can upload you a firmware of every version which was on dji servers available. but from a quick check rc version didnt have any interesting changes
[2020-05-09 09:35:57]
heresmydron :
alright
[2020-05-10 19:06:59]
whitey12884 :
[https://youtu.be/PnJEg0Q1BHM](https://youtu.be/PnJEg0Q1BHM)
[2020-05-10 20:06:48]
heresmydron :
amazing
[2020-05-11 19:16:55]
heresmydron :
hey, im very interested in silencing the remote. While i could easily remove the speaker, i think there has to be a way to do it via software. Fortunately the rc firmware is not encrypted and you can shell it quite easily so i think the attack surface is sizeable
[2020-05-11 19:17:23]
heresmydron :
now, there are two ways i thikn the rc is beeping, 1) using `/bin/beep`, 2) using the GPIO of the atheros chip
[2020-05-11 19:17:58]
heresmydron :
couldnt find any references to `beep` in any of the files of hte rc, so i think it beeps with the GPIO pins
[2020-05-11 19:19:36]
heresmydron :
according to the datasheet (<https://www.generationrobots.com/media/Atheros%20AR9342.pdf>) the spdif_out pin is gpio23, but by dissasembling `apsrv` ive only found calls to pins 3 and 12 (clock and data in) and those are called by the `usb_init_io` function
[2020-05-11 19:20:06]
heresmydron :
was wondering if someone already explored this and could give me any pointers. also if you are interested in silencing the remote and want to team up, send me a dm
[2020-05-11 19:37:01]
jcase :
you dont need an attack suryafce
[2020-05-11 19:37:06]
jcase :
i mean its entirely unprotected
[2020-05-11 19:39:09]
heresmydron :
well yeah by attack surface i mean, the unencrypted firmware
[2020-05-11 19:39:23]
heresmydron :
english very much hard no native language sorry bad english
[2020-05-11 19:42:03]
jcase :
no worries
[2020-05-11 19:42:06]
jcase :
your english seems fine
[2020-05-11 19:42:10]
jcase :
i couldnt tell
[2020-05-11 19:46:49]
heresmydron :
:slightly_smiling_face:
[2020-05-11 19:48:04]
validat0r :
@jan2642 did a SilenceRC for Spark back in the days .. maybe you can persuade him to do the same for the Mini .. RCs should be much alike
[2020-05-11 19:48:08]
jan2642 :
@jan2642 has joined the channel
[2020-05-11 19:51:46]
heresmydron :
i wanted to diff the firmware from DDD and the one that silenciorc creates but it refuses to connect to the mini's rc
[2020-05-11 19:52:15]
heresmydron :
hi @jan2642 :smile:
[2020-05-15 16:11:33]
tombayne01 :
if controller hardware is unencrypted what’s stopping us from activating FCC mode on a controller firmware level?
[2020-05-15 21:17:33]
validat0r :
In mini?
[2020-05-16 18:45:40]
heresmydron :
if anyone happens to be playing with a shelled RC, would you mind sending to me the results of `ls -la /dev` and `ls -la /dev/ath-gpio`? thanks!
[2020-05-16 20:14:39]
jcase :
i can later
[2020-05-17 09:22:26]
heresmydron :
:thumbsup:
[2020-05-24 01:38:17]
softice :
Good morning everyone!
Any way of getting the Mini's Micro-USB port to supply power like the Mavic Pro?
(needs to be switched to USB host mode probably, possible without root? if not, are there any PCB pins with 5V output?)
[2020-05-25 22:28:07]
444a49 :
hi all, i just joined and wanted to share a list of findings, tips and tricks for the mavic mini ive discovered or found somewhere else
[2020-05-25 22:28:22]
444a49 :
nothing groundbreaking but might be a good starting point for all newcomers
[2020-05-25 22:28:30]
444a49 :
check it out <https://github.com/444A49/minifindings>
[2020-05-25 22:34:03]
jcase :
@444a49 encryption is done by ftp for sure, not blackbox
[2020-05-25 22:34:29]
jcase :
sending the duml packet getVersion will leave serial p
[2020-05-25 22:34:30]
jcase :
up
[2020-05-25 22:34:32]
jcase :
without assistant
[2020-05-25 22:34:41]
444a49 :
thats packet 1 right?
[2020-05-25 22:34:45]
444a49 :
or command 1
[2020-05-25 22:34:45]
jcase :
yes
[2020-05-25 22:34:48]
jcase :
1 packet
[2020-05-25 22:35:26]
444a49 :
awesome i assumed assistant was doing something like that but couldnt figure out how to do it with serialtalk
[2020-05-25 22:35:30]
444a49 :
ill take a look tomorrow
[2020-05-25 22:35:33]
444a49 :
thanks for your input!
[2020-05-26 10:05:01]
heresmydron :
anyone here willing to share with me how to shell the AC? received a broken unit and id like to start poking around
[2020-05-26 13:12:59]
jcase :
unlikely someone is going to hand over a forensically valuable exploit at this point
[2020-05-26 13:16:24]
jcase :
unforunately with DJI offering cash for them, its to risky to share as people are tempded to burn them
[2020-05-26 14:20:48]
heresmydron :
and i guess they make you sign an NDA, otherwise we would see more exploits being published for older, patched versions, right
[2020-05-26 14:22:53]
jcase :
@heresmydron no idea, they dont pay enough for me
[2020-05-26 14:23:03]
jcase :
my concern is sharing an exploit here with someone i dont know
[2020-05-26 14:23:13]
jcase :
would be them claiming the bounty, which would fix it
[2020-05-26 18:42:34]
oakley75 :
Does @jezzab have a take on whether the mini could end up being compatible with the great dumldore?
[2020-05-26 19:49:40]
jcase :
@reoak its duml, so yeah it could
[2020-05-26 19:49:46]
jcase :
if the work was done
[2020-05-26 19:49:56]
jcase :
but it requires an exploit
[2020-06-03 15:36:06]
whitey12884 :
Is it possible to downgrade mini using Dumbledore?
[2020-06-03 15:44:33]
jcase :
no
[2020-06-03 17:20:33]
whitey12884 :
Thanks
[2020-06-04 06:55:36]
info020 :
hey, to flash mavic mini or to edit and share the parameters you can use our new tool at <https://drone-hacks.com> for free!
[2020-06-04 12:28:42]
poopnondji :
@info020 flasher works:v: successfully downgraded Mini to .200
[2020-06-04 12:37:38]
info020 :
awesome, enjoy it :slightly_smiling_face:
[2020-06-04 13:26:13]
trulala69 :
@vdub804 Coming from which FW version?
[2020-06-04 13:32:30]
poopnondji :
@trulala69 .400
[2020-06-04 13:35:02]
trulala69 :
Thanks! Was it .400 with or without downgrade prevention?
[2020-06-04 13:35:34]
trulala69 :
Must have been the without, I guess ...
[2020-06-04 13:35:48]
poopnondji :
antirollback 1
[2020-06-04 13:36:14]
trulala69 :
Oh, wow, that's cool ...
[2020-06-04 13:37:13]
poopnondji :
yessir
[2020-06-04 13:38:30]
trulala69 :
As I'm on the CE version of the mini, any chance have you tested the FCC Boost already?
[2020-06-04 13:39:27]
poopnondji :
not yet but I will later today.
[2020-06-04 13:39:47]
trulala69 :
Ur on CE as well?
[2020-06-04 13:39:59]
poopnondji :
fcc
[2020-06-04 13:40:40]
trulala69 :
Ok, might not as useful for the CE Version due to the different hardware
[2020-06-04 13:41:13]
ttqyswne :
Hey guys. The only power mod available on the MM is Boost mode. Theirs physical hardware differences on the PCB that dictate if its a CE or FCC. Restoring to "Stock" powermode will simply restore you to CE or FCC depending what your drone already was. Powerboost will give you max transmit power, higher than FCC, regardless of if you have a CE or FCC drone.
[2020-06-04 13:42:23]
ttqyswne :
Both models will see a range increase. a CE drone will see more of an increase obviously due to its lower power "from factory", but FCC drones still get a good bump in power and therefore range.
[2020-06-04 14:29:52]
trulala69 :
Thanks for explaining! The boost is then on the RC only and a bit on 5.8 on CE AC, right?
[2020-06-04 14:33:23]
ttqyswne :
@trulala69
On CE hardware we boost as follows
2.4G > 31mW
5.8G > 15mW
And on FCC
2.4G > none (DJI removed hardware support for 2.4G)
5.8G > 151mW
[2020-06-04 14:43:02]
markeviciusmodestas :
So basically it means the Power Boost brings CE to FCC range standarts?
[2020-06-04 14:50:48]
ttqyswne :
Yes in essence. Its just that with drones like the MP1, you dont have Standard >FCC >Boost, The MM's just have Standard >Boost, but boost varies depending if your drone is CE or FCC from the factory :slightly_smiling_face:
[2020-06-04 14:50:49]
validat0r :
probably not
[2020-06-04 14:51:08]
ttqyswne :
Its not exactly the same, but close enough
[2020-06-04 14:51:15]
validat0r :
well, we'll see :wink:
[2020-06-04 15:06:45]
markeviciusmodestas :
Will try my Mini out after work. My last result on stock CE was 500m in my flying spot, which sucks :disappointed:
[2020-06-04 15:08:32]
cs2000 :
Interested to hear your results. My mini has spent most of its life tethered to my PC so far. Not done any range tests on it ! I activated my MP1 with DH as i wanted to see what it could do.
[2020-06-04 15:10:23]
markeviciusmodestas :
I'll bring my laptop to the field as well. Juuust in case.
[2020-06-04 15:16:28]
jcase :
mini is the most fun to fly
[2020-06-04 15:16:35]
jcase :
i mean yuou can crash it and your not out shit
[2020-06-04 15:16:40]
jcase :
hell ive crashed it a lot and it still flies
[2020-06-04 15:22:14]
cs2000 :
Crashed mine once and the grille on the bottom cracked lol. But like you say, if you really kill it, its not all that much $$
[2020-06-04 15:22:40]
cs2000 :
That was from about 6ft so i got off lightly i guess. The MP1 would have been more damaged for sure
[2020-06-04 15:23:33]
jcase :
i rain into a building some how
[2020-06-04 15:23:42]
jcase :
few scratches that is it
[2020-06-04 15:33:38]
heresmydron :
@info020 why is firmware .400 "recommended"?
[2020-06-04 15:33:54]
heresmydron :
.500 is not rollback-able?
[2020-06-04 15:34:17]
jcase :
@heresmydron there are two variants of .500
[2020-06-04 15:34:26]
jcase :
its a weird firmwarew
[2020-06-04 15:34:31]
jcase :
i dont know why they would reocmmend 400
[2020-06-04 15:34:39]
jcase :
but i can say .500 is weird
[2020-06-04 15:34:51]
jcase :
ive not seen two firmwares with same firmware version before
[2020-06-04 15:37:57]
heresmydron :
mmm, ddd only shows one version available for .500
[2020-06-04 15:38:17]
heresmydron :
where did you get the other version
[2020-06-04 15:40:01]
poopnondji :
@heresmydron maybe because .400 is the last fw that lets you battery type = 0 plus allows you to unlock geo zones.
[2020-06-04 16:15:34]
heresmydron :
makes sense
[2020-06-04 16:19:24]
jcase :
@vdub804 huh?
[2020-06-04 16:19:35]
jcase :
o mp 500?
[2020-06-04 16:19:39]
jcase :
ah
[2020-06-04 16:19:49]
jcase :
i didnt know that about geozone unlocking, thats not how i did it
[2020-06-04 16:19:54]
jcase :
til
[2020-06-04 16:28:40]
validat0r :
I reached 2.8km on boosted mini iirc .. Elevated starting point, clear path, countryside
[2020-06-04 18:41:28]
markeviciusmodestas :
Was your drone FCC or CE?
[2020-06-04 18:41:52]
markeviciusmodestas :
Flew with the setting on and off. I'd say the max difference was 100 meters
[2020-06-04 18:42:08]
markeviciusmodestas :
It did reach 1km in the spot
[2020-06-04 19:00:46]
validat0r :
Mine is CE
[2020-06-04 19:01:42]
markeviciusmodestas :
Firmware?
[2020-06-04 19:01:47]
validat0r :
.000
[2020-06-04 19:02:04]
validat0r :
But that shouldn't matter imho
[2020-06-04 19:04:01]
heresmydron :
how did you activate yours without updating the firmware? mine was on .000 but after activation it forced me to update to .200
[2020-06-04 19:04:07]
heresmydron :
and i got the mini the day it was released
[2020-06-04 19:09:14]
validat0r :
playing with dji fly .. deinstalling, re-installing, cutting internet conn. at the right moment .. was difficult. I did update the NFZ one time, but I think I could have prevented that, too
[2020-06-04 19:09:38]
validat0r :
not sure it was worth it .. anyway
[2020-06-04 19:09:43]
heresmydron :
ehheh
[2020-06-04 19:09:50]
heresmydron :
well at least im sure you had fun
[2020-06-04 19:10:31]
heresmydron :
im going to get an air 2 in a few months and my plan to activate it is proxify everything with charles proxy and allow/deny each individual request. only the activation one gets allowed to go through, the rest straight to /dev/null
[2020-06-04 19:11:04]
validat0r :
yeah .. as always it's a f*cking mess with dji
[2020-06-04 19:11:08]
jcase :
can you activate it from the phone?
[2020-06-04 19:11:21]
jcase :
i dont remember how i acti vated mine
[2020-06-04 19:11:37]
validat0r :
sure, I activated it via dji fly .. how else?
[2020-06-04 19:12:40]
validat0r :
I had to "unground" it a few times .. but that's a simple duml
[2020-06-04 19:12:52]
heresmydron :
you have to, otherwise it limits the flight distnace to something silly like 5m
[2020-06-04 19:13:26]
heresmydron :
unground you mean "cant take off until you upgrade firmware"?
[2020-06-04 19:13:33]
validat0r :
yes
[2020-06-04 19:21:17]
markeviciusmodestas :
I can pull logs if that is useful though. I want to know whether that my drone is faulty or it's just the hack
[2020-06-04 19:31:13]
markeviciusmodestas :
<https://app.airdata.com/share/ehxtyI> Without boost
<https://app.airdata.com/share/jAdYky/> with boost
[2020-06-04 19:45:50]
markeviciusmodestas :
And it always shows this when I start the app.
[2020-06-04 19:50:32]
heresmydron :
what happens if you click ok? does the rc disconnect briefly?
[2020-06-04 19:51:01]
poopnondji :
@markeviciusmodestas what firmware do you have on the AC?
[2020-06-04 19:56:04]
markeviciusmodestas :
Remote: v01.00.0400
Drone: v01.00.0500
[2020-06-04 20:09:39]
poopnondji :
Try it with .400 dji switched things up with .500 even modified/removed some params that you could change on .400 like sports mode and battery type = 0 among others.
[2020-06-04 20:26:14]
markeviciusmodestas :
Will do tomorrow.
[2020-06-07 14:50:50]
cadbob :
For that warning message you need to re-link controller to ac
[2020-06-07 16:25:16]
makerbob :
Fly low with VPS on!
(strafer-mod for Mavic Mini)
```py comm_og_service_tool.py -vvv com[your com port #] WM160 FlycParam set min_height_user 1 --alt```
Adapt above command to tutorial like given here:
<https://www.youtube.com/watch?v=LdQtvJjjqeI&t=390s>
Or use the available new breed of GUI tools. Could be programmed as a slider too.
No need to tape MM bottom sensor.
MM can fly 3 inches / 8 cm above ground with the bottom sensor still providing stability.
Essential for some shots + much easier and faster to hand catch.
Be careful. Prolonged hovering very low without forward motion can cause instability of AC due to ground effects. This is one reason DJI sets the "min_height_user" parameter to default = 5, which translates to maybe 12 inch / 30 cm. Above command sets the parameter to 1. Haven't tried 0.
Tested on FW200 on Mavic Mini. Parameter change persists after restart.
Can't tell if it works in later FW.
Credits to OG
<https://github.com/o-gs/dji-firmware-tools>
Have fun and fly low :)
[2020-06-07 22:17:38]
heresmydron :
indeed it works, just tried it
[2020-06-07 22:17:48]
heresmydron :
the mini has a lot of trouble to hover at that distance
[2020-06-07 22:17:56]
heresmydron :
at least it did with my fake wood flooring
[2020-06-07 22:18:38]
444a49 :
@makerbob im going to add that to my guide if you dont mind (<https://github.com/444A49/minifindings>)
[2020-06-07 22:21:17]
heresmydron :
switched to altitude mode after a few seconds of failing to hover
[2020-06-08 01:54:10]
poopnondji :
so I did a thing :joy:
[2020-06-08 01:55:19]
poopnondji :
can still modify params such as sport_cfg_tilt_atti_range = 60, battery_type = 0 etc.
[2020-06-08 07:30:47]
heresmydron :
on .500?
[2020-06-08 07:48:42]
poopnondji :
Yessir
[2020-06-08 07:49:57]
poopnondji :
Removed all modules from .500 firmware except for camera upgrade and flashed on top of .300
[2020-06-08 08:13:55]
trulala69 :
How did you do that? Any instructions or hints, where to read, would be great....
[2020-06-08 08:46:36]
trulala69 :
Hmm, I guess, it's done the same way as with the old ones, is it? (described here <http://dji.retroroms.info/howto/modulemix>) Correct?
[2020-06-08 09:11:46]
ttqyswne :
@trulala69 yes, works in the same way
[2020-06-08 09:11:51]
trulala69 :
@vdub804 could you confirm the module number for the camera update is still 100, before I break it, please?
[2020-06-08 09:13:11]
ttqyswne :
<http://dji.retroroms.info/faq/modulecookbook>. It doesnt have the MM on there, but the numbers do not change, theyre still valid. 100 and 101 would need to be removed as theyre the camera firmware and the loader.
[2020-06-08 09:13:26]
ttqyswne :
sorry, not removed, kept
[2020-06-08 09:17:03]
trulala69 :
Super cool, thanks for confirming ... the Mini FWs have only module 100 as far as I can see...
[2020-06-08 09:18:45]
bin4ry :
i love to see that the free MM freatures kicks off new developement :slightly_smiling_face:
[2020-06-08 09:26:34]
trulala69 :
Again, thanks for all of this, bin4ry!! Love the new possibilties to tinker with the mini ...
[2020-06-09 10:05:38]
markusfriedl :
@ttqyswne so just to be sure.. you downgrade to .300 fw, you took the .500 firmware and removed everything except 100 and 101 module an then flashed it on top of .300 firmware right?
[2020-06-09 22:16:37]
heresmydron :
[2020-06-10 10:18:37]
asdrubale :
Just a question about module mix but if i replace the module 0306 of 0500.tar file with the 306 of 0400 can I try ? or is too risky ..just your feeling
[2020-06-10 10:20:20]
trulala69 :
Hi, this doesn't work as far as i know. You flash .400 first and the .500 WITHOUT .306. Done this yesterday, works perfectly!
[2020-06-10 10:23:33]
ttqyswne :
Yeah that will fail. The files need to match the signature the drone is expecting
[2020-06-10 10:23:51]
ttqyswne :
You can delete files from a .bin/.tar, but you cannot add extra ones in/replace them
[2020-06-10 10:24:02]
trulala69 :
Exactly ...
[2020-06-10 10:40:40]
asdrubale :
Thanks to all
[2020-06-10 11:27:07]
asdrubale :
My new mini , to test different propeller
[2020-06-10 11:30:53]
asdrubale :
[2020-06-10 11:32:14]
asdrubale :
[2020-06-10 11:33:31]
asdrubale :
[2020-06-10 11:38:36]
trulala69 :
You’re kidding me! Great modification :+1::+1:
[2020-06-10 11:42:47]
asdrubale :
In case some people are interested in results of yagi antenna here my statistical results , just to clarify , the test field always the same : rural area , some houses and farm (only two on the path ) direct fly same path all test , 100 mt high and test run until lost signal and failsafe rth.
[2020-06-10 11:51:27]
asdrubale :
And here same test but on ss5 or better know as fcc usa version , here test are made using fake gps , because in Europe doesn’t make sense using ss5 version without fake gps
[2020-06-10 11:56:29]
trulala69 :
Interesting, especially the improvement on 5.8 in CE. I wonder if you would get even a bit more on CE using DH‘s RC TX boost...
[2020-06-10 21:23:27]
heresmydron :
turns out you _can_ connect a usb hub to the RC
[2020-06-10 21:23:31]
heresmydron :
[2020-06-10 21:23:53]
heresmydron :
that absolute mess actually worked, usb to eth adapter and phone were connected tot he RC at the same time
[2020-06-10 21:28:42]
jcase :
ya that should work fine
[2020-06-10 22:31:12]
heresmydron :
it does but at first one device was allowed at a time. meaning pluging the phone disconnected the ethernet and vice versa
[2020-06-10 22:31:22]
heresmydron :
althoguh lsusb reported all connected devices
[2020-06-10 22:31:37]
heresmydron :
plugging and unplugging things automagically fixed it
[2020-06-11 21:21:12]
e100at :
Excellent @asdrubale those new mini arms are a very nice piece of work, well thought out :+1:
[2020-06-21 17:47:43]
whitey12884 :
[2020-06-21 17:47:50]
whitey12884 :
A few pictures of my carbon fiber mini :-)
[2020-06-21 17:48:03]
whitey12884 :
[2020-06-21 20:00:31]
validat0r :
Badass
[2020-06-21 20:01:07]
validat0r :
But probably not lighter than the original, eh?
[2020-06-21 20:20:00]
pingspike :
was it @lowellfoo780 that drilled 1,000 holes in the arms of the MP?
[2020-06-21 20:21:36]
lolo780 :
A few people have
[2020-06-21 20:22:37]
lolo780 :
[2020-06-21 20:23:10]
lolo780 :
The late Beanbubba made this one. I was doing some work on it when he passed away.
[2020-06-21 20:25:44]
lolo780 :
So it's been sitting on the shelf. One day I'd like to use it to scatter some of my son's ashes in both of their memories.
[2020-06-21 22:05:13]
whitey12884 :
Wow that is insane.... At the moment it weighs the same as stock, I have a few ideas to make it lighter. We shall see...
Sorry to hear about your losses
[2020-06-21 23:02:15]
lolo780 :
Thanks.
For the mini, what's the goal? I usually lengthen arms to fit longer props and/or unshroud the prop wash.
[2020-06-22 03:28:39]
digdat0 :
Beanbubba was a good guy, a mad scientist. Hes missed.
[2020-06-22 13:36:13]
whitey12884 :
Was beanbubba the one who passed away in the motorcycle accident?
[2020-06-22 13:36:57]
whitey12884 :
I'll lengthened the arms eventually...
[2020-06-24 09:08:37]
markeviciusmodestas :
My current maximum result with DroneHacks and CE Mavic Mini. COuld have flown further, but wind picked up. :disappointed:
[2020-06-24 09:10:16]
bin4ry :
wow nice !
[2020-06-24 09:11:18]
bin4ry :
we are currently collecting images for the homepage to show the power of the boost mod! we also got some nice captures of the signal strength etc. so if you want to show the image on the homepage or make a even nicer once i would be happy :slightly_smiling_face:
[2020-06-24 09:23:50]
validat0r :
Yeah, 2km is what you can expect on CE without extra antennas. Nice flight. Mini is awesome in that way compared to the spark because you don't have to watch your battery levels.
[2020-06-24 10:39:34]
markeviciusmodestas :
Sure. Why not? :)
[2020-06-24 11:14:19]
bin4ry :
:slightly_smiling_face:
[2020-06-24 16:09:41]
markusfriedl :
mount a mavic air battery to spark and you also get at least 20min pure flight time ;)
[2020-06-24 16:54:37]
validat0r :
I know
[2020-06-28 15:47:09]
whitey12884 :
[https://youtu.be/sWSd0tMK_GA](https://youtu.be/sWSd0tMK_GA)
[2020-06-28 15:47:15]
whitey12884 :
Here's a new record :-)
[2020-06-28 17:50:58]
validat0r :
Amazing
[2020-07-06 21:03:21]
cantrepeat :
Docked my mini with international space station this morning.
[2020-07-07 15:54:05]
markeviciusmodestas :
[2020-07-07 15:55:11]
markeviciusmodestas :
Went back to my spot. Grabbed those cheapo reflectors for the remote and here is the result. CE model + DroneHacks and SunnyFe reflector for a few bucks.
[2020-07-07 18:54:22]
heresmydron :
impressive
[2020-07-07 18:54:25]
heresmydron :
2.8 or 5.4?
[2020-07-07 19:47:52]
markeviciusmodestas :
2.4Ghz
[2020-07-07 20:48:07]
digdat0 :
thats awesome. how does it compare to stock?
[2020-07-07 22:53:50]
markeviciusmodestas :
From stock without reflectors? Almost twice the range. Battery becomes a limiting factor. And reflectors are quite wide beamed. I would not use them for very close range though.
[2020-07-22 19:16:53]
makerbob :
Is it possible to access / even change / the wifi pw of the mini RC?
[2020-07-27 02:19:03]
monkeyman :
I have a few mavic mini us version, try to longrange flight with same route and same height, the result is the old one is the champion in distance, 1 time video black screen, but the new one 4 times black screen, and less range also
[2020-07-27 02:20:50]
monkeyman :
and just now I try to downgrade the .400 firmware from the new one to .200, and if failed ( not finish) just finish uploading with no other progress, antirollback maybe?
[2020-07-27 18:54:17]
oakley75 :
Maybe I'm wrong but i thought a 1 value was clear
[2020-07-28 02:25:50]
cadbob :
My MP-1 says 3
[2020-07-28 02:26:16]
cadbob :
I was curious on those Values myself
[2020-07-28 04:17:44]
bin4ry :
what do you mean? antirollback 1 means only antirollback of 1 or higher can be flashed. so 1,2,3,4 would be ok but 0 will not be ok.
antirollback 3 means only firmware with antirollback 3 or higher can be flashed. so firmware with 0,1 or 2 cannot.
1 is numeric NOT boolean :wink:
[2020-07-28 11:46:44]
oakley75 :
Ah thank you for that
[2020-07-28 18:29:00]
trulala69 :
[https://m.youtube.com/watch?feature=youtu.be&v=FckgWcW6LyU](https://m.youtube.com/watch?feature=youtu.be&v=FckgWcW6LyU)
Some more information about what functions the SDK supports...
[2020-07-28 23:04:09]
oakley75 :
No waypoints... That was the realistic fear.
[2020-07-29 08:14:44]
validat0r :
Still no waypoints on mini?
[2020-07-29 08:27:14]
trulala69 :
According to Kilian's video no support (yet?) ...
[2020-07-29 10:45:14]
pingspike :
that's Litchi fucked then :face_with_rolling_eyes:
[2020-08-02 20:49:13]
asdrubale :
Some weight reduction
[2020-08-02 22:24:00]
lolo780 :
Nice. What was done in total?
[2020-08-03 20:19:33]
asdrubale :
new arm closed section not like C of original , take away bottom cover and battery door
[2020-08-03 20:20:39]
asdrubale :
[2020-08-03 20:21:08]
asdrubale :
[2020-08-03 20:33:09]
asdrubale :
Printed follow special axis to have empty arm
[2020-08-05 02:23:03]
whitey12884 :
You're doing amazing work!!
[2020-08-05 20:33:19]
e100at :
Oooo! @asdrubale those look spot on. Can you tell us their respective weights? Very nicely done.
Looking forward to your test results.
[2020-08-06 10:56:15]
pingspike :
don't forget, use the Japanese battery and you'll take 50g off with zero mods :smile:
[2020-10-07 22:32:23]
elphil :
does anyone have a spi flash dump of the WM160? seems like I have a brick.
[2020-10-07 22:33:13]
jcase :
@elphil the spi is only the FC
[2020-10-07 22:33:24]
jcase :
and its encrypted with a per AC key
[2020-10-07 22:33:44]
elphil :
ah, that's why my dump looked broken
[2020-10-07 22:48:08]
elphil :
where's the flash for the main soc? or are there any debug pads for jtag/uart/?
[2020-10-07 22:51:37]
jcase :
in the nand
[2020-10-07 22:51:39]
jcase :
i dont know
[2020-10-13 18:54:38]
elphil :
can anyone send me a link to an unencrypted firmware dump of the WM160?
[2020-10-13 19:05:20]
hans112 :
!ddd
[2020-10-13 19:57:32]
elphil :
@hans112 the fw image for the mavic mini are encrypted and keys are not available in dji-firmware-tools
[2020-10-16 05:34:21]
monkeyman :
DroneDJ: DJI Fly update reportedly increases Mavic Mini's flight range.
[https://dronedj.com/2020/10/15/dji-fly-update-reportedly-increases-mavic-minis-flight-range/](https://dronedj.com/2020/10/15/dji-fly-update-reportedly-increases-mavic-minis-flight-range/)
[2020-10-16 07:19:33]
bin4ry :
i cannot see range improve on my mini with or without boost. (iOS app) maybe china only?
[2020-10-16 15:28:03]
digdat0 :
is the update supposed to improve the AC or the RC, or both?
[2020-10-16 15:43:46]
jcase :
i dont see how an app only update oculd impact range
[2020-10-16 15:45:48]
pingspike :
isn't there an in-app distance limit? to stop you flying beyond X distance?
[2020-10-16 15:46:01]
pingspike :
(in the Fly app)
[2020-10-16 15:46:20]
pingspike :
guessing they've just increased that? :man-shrugging::skin-tone-2:
[2020-10-16 15:48:10]
jcase :
maybe, do you know what class it is in? i can look
[2020-10-16 15:48:22]
jcase :
but that would be a dumb place to put it
[2020-10-16 15:51:58]
bin4ry :
@jcase check if the in_china stuff maybe got removed :sweat_smile:
[2020-10-16 15:52:18]
jcase :
lol
[2020-10-16 16:01:29]
bin4ry :
and my drone also did not switch to boost or fcc mode from the app. which would be the only way i see for higher range.
[2020-10-16 22:33:09]
chipmangini :
Mavic Mini 2... <https://fccid.io/SS3-MT2PD2007>
[2020-10-16 22:33:42]
chipmangini :
[2020-10-16 22:34:34]
chipmangini :
From the FCC document, it looks like there is a release date of April 3, 2021...
[2020-10-16 22:40:03]
chipmangini :
More...
[2020-10-17 05:35:33]
pingspike :
4K camera now :thinking_face:
[2020-10-20 14:18:35]
hazardc :
also the 7.7 v suggests they abandoned the li-ion or it would be 7.2 (3.6x2 nominal) or fully charged 8.8
[2020-10-20 14:19:11]
hazardc :
so us will get a lihv mini 2
[2020-10-20 14:23:22]
hazardc :
FCC version ain't gonna get better, that's why they were on woot and clearance at costco 6 months ago
[2020-10-20 20:39:50]
whitey12884 :
Mavic mini has no distance limitations... There are people including me who have flown it out past 17km, and one past 30km
[2020-10-20 20:45:24]
pingspike :
using the DJI Fly app?
[2020-10-21 16:08:41]
oakley75 :
Adorama published Mavic Mini 2 prices it seems.
[https://www.adorama.com/ue06035.html?sdtid=14456906&origterm=alpine%20white%20edition&searchredirect=true&sterm=yxj0XiQy8xyORN0wUx0Mo38VUkExBoRZTTgkQo0&utm_source=rflaid62905](https://www.adorama.com/ue06035.html?sdtid=14456906&origterm=alpine%20white%20edition&searchredirect=true&sterm=yxj0XiQy8xyORN0wUx0Mo38VUkExBoRZTTgkQo0&utm_source=rflaid62905)
[2020-10-21 16:10:08]
oakley75 :
Nov 5th possibly
[2020-10-25 21:58:31]
asdrubale :
In china dji sell only ss5 so only 5,8 , and ss5 with geolocalization in china fly base on local SRCC wifi rule , the model d25 is not available in main china
[2020-11-06 14:18:36]
trulala69 :
Got a Mini 2 today ... It says FW01.00.000 and wants to be upgraded of course. Stay with it or upgrade? What do you think?
[2020-11-06 14:20:52]
webhdx :
If you care about hacking then stay on the lowest FW possible. Simple as that. There are no hacks for it yet so hard to judge if updating it would be a mistake now.
[2020-11-06 15:17:07]
trulala69 :
The parameter set of the Mini 2 exported with dh ... it seems the ranges are now as reduced as they're on the Mini 1 with FW .500 ...
[2020-11-06 15:21:49]
trulala69 :
Overall impression of the Mini 2: Arms are sturdier, the props are not so flexible anymore, the controller looks really serious now and the overall quality is better than Mini 1 ... Seems they heard all the complaints about Mini1 and made a new product to be sold to us ...
[2020-11-06 15:23:56]
trulala69 :
BTW they haven't published an update to DJI Assistant 2.0.14, Mini 2 isn't recognized (yet) ...
[2020-11-06 15:39:21]
bin4ry :
good that DH can handle it already (i guess without a device name but still ;))
[2020-11-06 16:05:32]
trulala69 :
Jepp... if you need something I can do to add support to the dh tool let me know...
[2020-11-06 16:08:46]
bin4ry :
will let you know if there is something to test :slightly_smiling_face:
[2020-11-06 16:58:37]
pingspike :
updating my firmware on Mini 2 to latest, happy to also test anything on latest that you guys put out
[2020-11-06 17:22:52]
trulala69 :
Hmm, I guess I‘ll upgrade as well in a few days reading the release notes:
Added Enhanced Photo.
Added Trimmed Download.
Added zoom to video mode.
Added ability to customize the lighting pattern for the front LED when in default state.
Changed way to switch between QuickTransfer mode and flight mode to pressing and holding QuickTransfer button for two seconds.
Optimized QuickTransfer so that a transmission rate of up to 20 MB/s can be achieved in an environment without interference.
Optimized exposure for panoramic photos in some scenarios.
Optimized logic for Return to Home (RTH). The default RTH altitude is adjusted to 100 m and the aircraft will hover in place if the horizontal distance from the Home Point is less than 20 m.
Optimized logic of Low Battery RTH.
Fixed rare issue: the gimbal vibrated while recording in Normal mode.
Added support for DJI RC-N1 Remote Controller. The DJI RC-N1 Remote Controller can be used with DJI Mini 2 as well as Mavic Air 2 (requires DJI Fly v.1.2.0 or later).
[2020-11-06 19:08:07]
markusfriedl :
@trulala69 will the props from mini 2 will fit on mini 1 as well? Can you maybe or someone else verify that?
[2020-11-06 19:12:09]
trulala69 :
I‘ve compared them ... both are 4726 propellers, Mini 1 4726 F, Mini 2 4726 FM
[2020-11-06 19:14:07]
trulala69 :
Ok the screws are different in diameter through the prop... but if you take the ones coming with the prop set, you should be fine...
[2020-11-06 19:15:31]
trulala69 :
The one with the white stripe is a mini 1 prop on a mini 2, it should work the other way around...
[2020-11-06 19:25:32]
trulala69 :
Comparing the material the new ones aren’t so flexible anymore imho
[2020-11-06 19:28:10]
pingspike :
agreed
[2020-11-06 19:28:38]
pingspike :
even the airframe itself feels somehow more solid and well built :thinking_face:
[2020-11-06 19:46:11]
trulala69 :
Especially the front arms don’t twist anymore... I used tape on my M1 to make it more sturdy, now not needed anymore.
[2020-11-06 19:52:27]
markusfriedl :
@trulala69 thank you for the insight... maybe i will get some if they are more durable and/or quieter than the ones from mini 1.. but i think i will stick to the mini 1 bird for now :slightly_smiling_face:
[2020-11-06 19:53:39]
trulala69 :
The new controller is nice, but bigger and heavier than the old one, but you get all buttons back :+1:
[2020-11-06 19:54:53]
markusfriedl :
Guess the battery endurance of the new controller should be much better then :slightly_smiling_face: i personally like the small controller size
[2020-11-06 19:55:03]
trulala69 :
@markusfriedl no problem... I don’t think the new props are quieter as it’s the same 4726 profile
[2020-11-06 19:55:35]
trulala69 :
The small controller was fitting perfectly in my jacket ... the new one won’t
[2020-11-07 19:02:49]
digdat0 :
thank for sharing the mini2 params. i wonder what the power_bandwidth one does
[2020-11-07 19:11:02]
bin4ry :
[https://drone-hacks.com/blog/post/201](https://drone-hacks.com/blog/post/201)
[2020-11-07 19:11:07]
bin4ry :
:blush:
[2020-11-07 19:13:36]
digdat0 :
i put all the mini2 params in the wiki as well, i need to buy me one! <https://dji.retroroms.info/howto/mini2params>
[2020-11-07 19:13:54]
digdat0 :
im all about hiking and portability with my ac, this is perfect.
[2020-11-07 19:23:29]
trulala69 :
As we‘re able to modify them now easily let’s check what they’re about...
[2020-11-07 19:32:32]
digdat0 :
some interesting looking parameters. i notice in normal mode and sport mode they have the max values limiting things at numbers lower than modders would like. But if ya look at "Gentle mode", the max limits are higher. if i had one i'd try increasing the gentle mode and also match the gentle mode rc scale to normal so it flies properly. <https://imgur.com/NhudqHg>
[2020-11-07 19:41:45]
trulala69 :
Cool, let’s see how long it takes until they close this one but for now: great find!
[2020-11-08 08:55:59]
trulala69 :
The parameter list of the current FW ...
[2020-11-08 10:22:16]
heresmydron :
huh mavic air 2 has the same params for "gentle mode"... i wonder if this would unlock faster descent speeds
[2020-11-08 10:22:31]
heresmydron :
same param range i mean, 0 to -10, while sport mode is locked to 0 to -3
[2020-11-08 10:29:41]
heresmydron :
mmmm those gentle modes are already present on the mini 1 as well...
[2020-11-08 10:29:44]
heresmydron :
[2020-11-08 10:29:58]
heresmydron :
(those are the params of the mini 1 on firm .200)
[2020-11-08 12:38:08]
kilrah :
getting a mini2 today as well :slightly_smiling_face:
[2020-11-08 12:38:13]
kilrah :
been a while since i was on here
[2020-11-08 14:07:04]
trulala69 :
Had my maiden with mini2 just an hour ago. Nice little machine and it seems it’s a bit quieter compared to the MM1 for some reason.
[2020-11-09 13:14:21]
trulala69 :
A friend of mine was playing with the params of gentle mode, problem is, you can't enter that mode as far as we know yet. On the RC we have cine=tripod, normal & sport, which have restricted parameter ranges. He tried to play around with g_config_control_control_mode, but no joy ... Any ideas?
[2020-11-09 14:09:04]
kilrah :
just received and maidened mine :slightly_smiling_face: this thing is awesome
[2020-11-09 14:11:49]
kilrah :
it's pretty much a pocketable mavic 1 :smile:
[2020-11-09 14:14:42]
kilrah :
the prop cover for carrying is great, finally
[2020-11-09 14:15:08]
kilrah :
prefer the old more compact controller style though
[2020-11-09 15:07:47]
heresmydron :
gentle mode might be leftovers from old FCs, cursory search on google says that its something that was avaiable at some point on the N3 FC and very old phantoms
[2020-11-09 16:04:05]
trulala69 :
I found some information pointing to the same (N3 etc.) ... which means, the open ranges for gentle mode are useless atm ...
[2020-11-09 16:34:56]
bin4ry :
we got this information form a user on mavic air 2. maybe works the same on mini2?
[2020-11-09 16:35:14]
bin4ry :
Increasing the vertical speed of the Mavic Air 2
Unfortunately DJI for some unknown reason, did not provide the ability to adjust the vertical speed and other parameters in standard modes such as Normal and Sport. However we can replace the choice of Sport or Tripod modes (on the remote control mode selector) with the "Gentle/Beginner" mode and adjust it to values higher than in standard Sport mode.
To do this, we need to change a number of drone parameters through Drone-Hacks:
-1 Find the parameter "g_config_control_control_mode[1]" and change the value frokm 8 to 6. This change Sport mode (8) to Beginner/Gentle mode (6).
-2 Find the parameter "mode_gentle_cfg_vert_vel_down" and change the maximum speed of descent from -1 to -10.
-3 Find the parameter "mode_gentle_cfg_vert_vel_up" and change the maximum speed of descent from 1.5 to 10.
-4 Change the rate of descent in Gentle mode from 2 m/s to the required. To ensure stability, we do not recommend more than 8 m/s.
-5 Find the parameter "mode_gentle_cfg_rc_scale" and change the value from 0.25 to 1.
-6 Find the parameter "mode_gentle_cfg_tilt_atti_range" and change the angle of attack from 20 degrees to 35.
-7 Find the parameter "g_config_mode_gentle_cfg_tors_gyro_range" and Change the rotation speed from 75 to 100 or 175 (optional)
NOTE: Ensure that you save each parameter after making a change to write all parameters to the drone.
Credits to our Russian user 'Pirandos'
[2020-11-09 16:43:01]
kilrah :
ooh gentle is beginner, right
[2020-11-09 16:43:28]
kilrah :
i knew i used to know what it was, but couldn't remember
[2020-11-09 16:50:01]
bin4ry :
let me know if that works on mm2
[2020-11-09 16:50:46]
matthijst :
Any thoughts on the chance someone will be able to hack the Mini 2 (fcc + nfz)? Dont think the original Mini was hacked?
[2020-11-09 16:52:43]
bin4ry :
i for myself do not make any announcements, i don’t like to announce something without being able to actually deliver. so my rule is the old Cyanogen rule: NO ETA :rolling_on_the_floor_laughing: but seriously, i just don’t talk about such stuff at all sorry.
[2020-11-09 16:57:52]
loli88ie :
With my friends try change tripod/normal and sport in gentle , but dont work:pensive:
[2020-11-09 17:05:27]
asdrubale :
Yes i confirm unfortunately doesn't work , we try to replace sport (swtich 1) tripod ,normal with gentle on mini 2 , but no effect , the only one that succeed is the rc_scale ....but you can modify also in normal and sport no needs gentle
[2020-11-09 17:06:33]
asdrubale :
Gentle was the old beginner in mavic 1 and spark , maybe now dji change and is not 6 the right value.
[2020-11-09 17:08:00]
asdrubale :
Dear Bin4ry in drone-hack some sport parameter are not visible , this for both firmware 01.00.0000 and 01.01.0000
[2020-11-09 17:09:53]
asdrubale :
Here excel file ...also with parameter comparison take a look on the last sheet
[2020-11-09 17:10:13]
asdrubale :
sorry unselect filter
[2020-11-09 18:02:14]
digdat0 :
gentle mode = beginners mode, yes?
[2020-11-09 18:02:57]
trulala69 :
It seems so...
[2020-11-09 19:19:31]
digdat0 :
someone wanna try leaving the Mini2 in beginners mode, try upping the speeds and see if it works? Im negotiating with the wife on a purchase :stuck_out_tongue:
[2020-11-09 21:46:37]
asdrubale :
doesn't work unfortunately
[2020-11-10 10:12:00]
bin4ry :
got some message that DH and mefistots tool dump different numbers of elements on the mm2, can someone with the drone verify it for me? i was not able to see a difference from the file i got but please some experienced check it for me ?
[2020-11-10 11:32:33]
kilrah :
i can, just need to remember how the script works lol
[2020-11-10 11:42:42]
kilrah :
[2020-11-10 11:43:46]
kilrah :
658 params
[2020-11-10 12:05:38]
bin4ry :
and the dhp file ?
[2020-11-10 12:05:43]
bin4ry :
thanks btw :slightly_smiling_face:
[2020-11-10 12:14:26]
bin4ry :
and which firmware is that @kilrah ?
[2020-11-10 12:20:12]
trulala69 :
I've posted DHP files for both FW's here a while ago ...
[2020-11-10 12:20:59]
bin4ry :
for both? i only saw the 01.00.0000 one
[2020-11-10 12:21:42]
trulala69 :
Both ...
[2020-11-10 12:44:17]
kilrah :
[2020-11-10 12:44:32]
kilrah :
01.01.0000 i think ,the updated one
[2020-11-10 12:44:58]
kilrah :
so much stuff in the update it kinda makes no sense to stay on old one...
[2020-11-10 13:10:15]
bin4ry :
yeah :wink: thanks
[2020-11-10 13:48:00]
bin4ry :
BETA BUILD, not release, handle with care. shoudl fix some parameter reading and i hope it may fix the firm flash
[2020-11-10 14:52:50]
kilrah :
really surprised with dji for once that the mini2 takes the mini 1's batteries
[2020-11-10 14:53:18]
kilrah :
ok got 12 more sport params with the beta
[2020-11-10 14:55:25]
kilrah :
flashing doesn't seem to work, upload goes to 100% instantly and i get flashing failed
[2020-11-10 14:59:51]
kilrah :
Info: Selected firmware file information:
Device: wm161
FirmwareVersion: 01.01.0000
Antirollback: 0
Info: Antirollback values identical, flashing possible.
Info: Start flashing firmware process...
Info: Enter final flashing stage!
Info: Flashing failed, please re-try!
[2020-11-10 15:06:34]
bin4ry :
ah too bad ok thanks
[2020-11-10 15:15:24]
bin4ry :
but atleast the params work out now
[2020-11-10 15:16:00]
bin4ry :
let's move discussions about dh to the ~dronehacks channel then
[2020-11-10 15:19:26]
kilrah :
ok
[2020-11-10 16:17:09]
kilrah :
gentle definitely works for me on 6
[2020-11-10 16:17:34]
kilrah :
can't try vert speed in my hotel room :smile: but yaw speed and rc_scale do work
[2020-11-10 16:38:06]
trulala69 :
asdrubale wrote yesterday "... normal with gentle on mini 2 , but no effect , the only one that succeed is the rc_scale ..."
[2020-11-10 16:38:58]
trulala69 :
But yaw_speed is now one parameter more ...
[2020-11-10 16:40:49]
trulala69 :
Which mode did you replace with gentle?
[2020-11-10 16:44:00]
kilrah :
cine
[2020-11-10 16:44:19]
kilrah :
just tested vert speed, didn't work, does +5/-3 like sport
[2020-11-10 16:45:22]
kilrah :
should try to change to lower to see if it really uses the gentle settings, but my guess is it does and there's just a cap at a lower level
[2020-11-10 16:50:30]
kilrah :
yeah that's it, they work, if i set +/-1 it does that
[2020-11-10 16:51:37]
loli88ie :
so gentle can't exceed the limits?
[2020-11-10 16:52:14]
loli88ie :
gentle but exists and is the 6. correct?
[2020-11-10 16:52:21]
kilrah :
correct
[2020-11-10 16:53:07]
kilrah :
i'm setting +6/-4 now and will see tomorrow, but at least +/-10 was capped at +5/-3
[2020-11-10 16:53:54]
loli88ie :
which is the parameter To yaw?
[2020-11-10 16:55:31]
kilrah :
mode_gentle_cfg_tors_gyro_range
[2020-11-10 16:55:35]
kilrah :
always the tors for yaw
[2020-11-10 17:10:24]
kilrah :
fc_dark_need_gps=0 allows starting without GPS without unlocking in app (but doesn't survive reboot, it's probably what the app sets when you unlock)
[2020-11-11 07:00:23]
loli88ie :
have you tried with the values + 6 / -4? I think they are stuck with the maximum limits of the sport
[2020-11-11 08:20:47]
kilrah :
yeah still limited to sport speeds
[2020-11-11 10:20:45]
pingspike :
Another firmware update available
[2020-11-11 10:20:53]
pingspike :
[2020-11-11 10:21:30]
pingspike :
Aircraft remains on 01.01.0000 though :man-shrugging::skin-tone-3:
[2020-11-11 10:21:43]
pingspike :
only the RC version number gets bumped
[2020-11-11 10:23:59]
pingspike :
no release notes on the DJI site yet either
[2020-11-11 11:44:48]
kilrah :
that's what came on the rc together with aircraft 1.01.0000 for me
[2020-11-11 11:48:17]
pingspike :
but firmware 02.00.1101 isn’t listed in the release notes for 5th November?
[2020-11-11 11:48:33]
pingspike :
it only lists .1100 :thinking_face:
[2020-11-11 11:54:58]
bin4ry :
it is the RC upgrade
[2020-11-11 11:55:20]
bin4ry :
we pulled it yesterday
[2020-11-11 11:55:21]
bin4ry :
<http://dankdronedownloader.co.uk/DDD2/app/index.php?model=wm161&ver=02.00.1101&type=Remote&Brand=DJI>
[2020-11-11 11:55:30]
bin4ry :
mini2 and ma2 have the same rc
[2020-11-11 11:55:31]
kilrah :
typical "quick bugfix" lol
[2020-11-11 11:56:37]
kilrah :
can nearly be happy the number changed at all given dji's past :smile:
[2020-11-11 12:42:39]
bin4ry :
true that !
[2020-11-11 12:43:31]
bin4ry :
anyway now the versioning is out of order with the drone, as they use the controller for both drones :wink: something is always strange with dji ^^
[2020-11-11 22:50:29]
asdrubale :
For info Mavic mini 2 battery vs mini 1
[2020-11-12 01:01:59]
cadbob :
I'm not even going to pretend to know what this means! lol
[2020-11-12 08:24:39]
trulala69 :
Can someone post some more pictures in different angles of the MM2 fly more prop holder, please? I've seen only this one in the store. As I don't have one and this is supposed to work I want to remodel it & print it, if possible ...
[2020-11-12 10:51:40]
mel69hash :
[2020-11-12 10:52:37]
mel69hash :
[2020-11-12 10:53:39]
mel69hash :
[2020-11-12 10:54:01]
mel69hash :
[2020-11-12 11:19:19]
bin4ry :
i think i figured the flashing issue that some of you had
[2020-11-12 12:03:12]
trulala69 :
Thanks a lot ... from the top it looked different to the one they're offering, but actually they're selling it seperatly ... I guess I will just order one, designing it is too time consuming (lazy me) ...
[2020-11-12 14:46:27]
asdrubale :
Dear all some people have updated list dji fly **iTunes appextvrsid ?**
[2020-11-13 11:46:26]
bin4ry :
i posted a beta in ~dronehacks if mini2 users could test flashing it would be awesome
[2020-11-13 11:49:57]
kilrah :
led flashes as expected during update, progress progresses :smile:
[2020-11-13 11:51:06]
bin4ry :
:smile:
[2020-11-14 14:36:50]
trulala69 :
Is there any recommendation for a good IOS HDR composition APP?
[2020-11-16 12:08:46]
edo :
Am I right that the EXP parameters (g_config.control.yaw_exp_mid_point) are also lost (hidden) on Mini2 for Normal, Tripod and Sport mode?
[2020-11-22 17:39:03]
deesparko :
mini 2 owners?
Could you pls check if in AEB mode it saves dng's as well?
ta
[2020-11-22 18:41:21]
kilrah :
yup it does
[2020-11-22 18:41:36]
kilrah :
+/- 0.7 only though, no setting of how much to bracket
[2020-11-22 19:25:00]
deesparko :
thanks, good, +-0.7 is not perfect of course but better than 0 and dng could help a bit to recover shadows, etc. I suppose there's no way to login with fake accounts yet, so one have to activate it first...
[2020-11-23 08:00:20]
elintnl :
@ deesparko there is an issue to the DNG photo in pano mode of the mini2
<https://forum.dji.com/forum.php?mod=viewthread&tid=228896>
[2020-11-23 10:01:49]
elintnl :
<https://forum.dji.com/forum.php?mod=viewthread&tid=229792&extra=page%3D1%26filter%3Dtypeid%26typeid%3D766%26typeid%3D766>
[2020-11-23 16:22:23]
kilrah :
no update here
[2020-11-23 20:32:40]
pingspike :
nothing on [dji.com](http://dji.com) either :man-shrugging::skin-tone-2:
[2020-11-24 07:26:16]
deesparko :
thanks for sharing, everyone! ignore that new update (0.6MB) it ruins the gimbal normal behaviour, it starts mumbling
[2020-11-24 07:28:28]
deesparko :
I've tried several dng's from the pano folder (not mine)
and did't have that issue in lightroom
Although I never use internal PANO mode because it can ruin exposure in shadows and highlights, only manual panos in AEB mode + PGUI or lightroom
[2020-11-24 09:02:42]
bjoneseying :
Did anyone find which SoC the Mini 2 is using? Still Ambarella or did they move to something more modern like the HiSilicon?
[2020-11-24 14:43:57]
the_lord :
Mini 2 has Ambarella H22
[2020-11-27 19:34:12]
mefisto :
What is on Mavic Mini 1 GPS board, except u-blox?
I only have a few photos; it looks like there is barometer and another chip, maybe IMU? Am I right?
[2020-11-28 01:45:09]
mefisto :
Never mind, I figured out everything I wanted:
<https://github.com/o-gs/dji-firmware-tools/wiki/WM160-GPS-and-IMU-board>
[2020-11-28 08:17:58]
ce383 :
Is there a parameter to disable turning off the motors after a rough collision?
[2020-12-04 13:43:37]
pingspike :
GPC case arrived here in the UK for the Mini 2
[2020-12-04 13:43:44]
pingspike :
[2020-12-04 13:43:56]
pingspike :
GPC never factor in the plug/charger for other countries
[2020-12-04 13:44:14]
pingspike :
needless to say, the standard UK plug does not fit in here :face_with_rolling_eyes:
[2020-12-04 13:44:27]
pingspike :
great case though :+1::skin-tone-2:
[2020-12-04 13:45:19]
kilrah :
the stock pouch is fine for me :slightly_smiling_face:
[2020-12-05 15:53:20]
deesparko :
the Mini 2 and the Spark owners (or at least the mini 2)
could you please compare them both together with the remote. I need to know how much space they (the mini 2 and its remote) take together.
Can they (the mini 2 + its controller) fit in the spark bag (which I use atm) and how much space is left after that (I use it for lenses, etc...)
That huge controller is the only reason I still did't buy the mini 2 and I can't get my hands on it before buying to check it myself. Found zero reviewers comparing them in this direction
And also couldn't get the remote dimensions on the DJI official site, it does not show them
Thanks in advance )
[2020-12-05 15:56:32]
jcase :
@deesparko if you ask me monday during the day ill do it
[2020-12-05 15:56:53]
jcase :
i havent opened hte mini2 yet so i cant tell you off memory
[2020-12-05 15:58:42]
deesparko :
@jcase thanks will do if don't get it earlier )
[2020-12-05 16:00:15]
kilrah :
[2020-12-05 16:00:27]
kilrah :
spark bigger
[2020-12-05 16:11:26]
deesparko :
@kilrah nice! thanks a lot, could you please also show them in the edgewise position, touching together - to get the total width
Probably the photo would be enough, I think I can put them both in the bag vertically, should fit
[2020-12-05 16:17:10]
deesparko :
[2020-12-05 16:19:56]
deesparko :
my spark, btw, was under water for a minute (accidentally crashed), 1.5m deep, hairdryer fixed all the consequences, the battery was absolutely OK after that :slightly_smiling_face: it's a tank
[2020-12-05 16:26:36]
kilrah :
[2020-12-05 16:26:46]
kilrah :
but i definitely wouldn't pack either of them that way :smile:
[2020-12-05 16:29:34]
deesparko :
LOL thanks a lot, I'll get the mini 2 then...
I put the spark that way since the beginning :)))
it's a work horse, actually I've sold more photos from the spark than from my P4P ))
[2020-12-05 16:31:04]
kilrah :
mm2 in spark bag
[2020-12-05 16:31:30]
kilrah :
mm2 in its own bag has room for a spark rc in addition...
[2020-12-05 16:31:43]
kilrah :
bags are about same size, just the new one has better shape, slightly wider
[2020-12-05 16:34:13]
deesparko :
good, I think I can fit mm2 into my spark bag vertically ))) it already looks bigger that thew new one ))
[2020-12-05 16:34:17]
kilrah :
since you get the bag in the mm2 fm combo...
[2020-12-05 16:35:33]
deesparko :
I've already ordered a solo version, so no bag
[2020-12-05 16:36:06]
kilrah :
really? it's basically never a good deal to get the aircraft alone
[2020-12-05 16:38:59]
deesparko :
probably... but I wanted to buy mini 1 batteries as they are cheaper now, but it seems they are Lion on instead of Lipo on the mini2 a bit different voltage, but someone already tested they are working on the mini2
[2020-12-05 16:40:06]
deesparko :
2 batteries would be enough for me or even one, especially if the mini 2 has 20mins flight average
[2020-12-05 16:40:44]
kilrah :
yes they work and it's intended, but they're 20gr more and the aircraft tends to give you warnings in high winds because of higher weight and lower voltage
[2020-12-05 16:41:09]
kilrah :
i couldn't do without the charging hub and extra batteries personally
[2020-12-05 16:41:31]
kilrah :
i have 6 batteries now since i have the mini1 too :smile:
[2020-12-05 16:42:38]
deesparko :
Well I can live without them I think.. the mini 2 charger,, does it charge them one by one or all at once like the spark one?
[2020-12-05 16:44:10]
kilrah :
one by one
[2020-12-05 16:54:07]
kilrah :
also dji upped the price of the mini 1 batteries in the meantime lol
[2020-12-05 17:03:41]
kilrah :
you'll probably want to be a bit more careful with the mm2 than the spark, the new one isn't a tank anymore lol
[2020-12-05 17:18:47]
deesparko :
yeah )
got mine
[2020-12-05 17:19:28]
deesparko :
[2020-12-05 17:19:56]
deesparko :
fits OK )
[2020-12-05 17:45:00]
deesparko :
@kilrah btw about the mini 1 battery... do you know if the mini 2 can charge it internally as I don't have any hub (apart from the spark or imax, etc), I believe the battery has its own BMS so it just controls the voltage by itself no special hub required
[2020-12-05 17:50:00]
deesparko :
6 batteries, nice )
[2020-12-05 17:54:52]
kilrah :
haven't checked but almost certainly works
[2020-12-05 17:55:18]
kilrah :
it's designed to work togethher as normal, it's not an "accident" that the mm1 battery fits :slightly_smiling_face:
[2020-12-05 17:55:41]
kilrah :
mm2 is soooo much quieter than the spark...
[2020-12-05 18:00:08]
deesparko :
I've just ordered a battery ) it's still cheap, not from DJI directly... so I have time to cancel just in case...
and quieter is always good )
I don't remember but someone tried the mini 1 props on the mini 2 and it was even quieter or maybe it was the spark vs the air
[2020-12-05 18:04:22]
kilrah :
lol i'm in a state where i can't either climb or descend/land
[2020-12-05 18:05:45]
deesparko :
:disappointed:
[2020-12-05 18:09:39]
kilrah :
broken nfz handling
[2020-12-05 18:10:25]
deesparko :
understood
[2020-12-05 18:15:30]
deesparko :
btw I'm curious if the mini1 could get the mini 2 FW (at least for the camera) or some functionality via app patching as they have identical sensors (it seems)
[2020-12-05 18:20:47]
kilrah :
believe they use a new more powerful processor
[2020-12-05 18:33:26]
deesparko :
yeah it's possible, but there's a good chance that it was just a software limitation by DJI, but just a speculation )
[2020-12-05 18:41:14]
kilrah :
fast charges just fine
[2020-12-05 18:48:01]
deesparko :
as expected, but more interesting is how far it will change, 8.4v is the mini charging voltage limit, 8.8 on the mini 2
so will BMS cut the higher voltage for the mini battery, I believe yes (if the battery BMS controls the charing process)
[2020-12-05 19:36:55]
deesparko :
@kilrah thank you for all you help :slightly_smiling_face:
[2020-12-05 20:26:51]
kilrah :
it obviously charged just as it should, the aircraft knows which battery is in and adjusts charge accordingly.
[2020-12-05 20:27:18]
kilrah :
again it's not a miracle it works, the firmware packages for the mini2 even specifically contain the firmware files for both battery types.
[2020-12-05 20:47:42]
kilrah :
lolz <https://www.youtube.com/watch?v=_5VV37kZYOY>
[2020-12-05 20:50:38]
kilrah :
we'll need an nfz hack in order to make the aircraft safer and avoid loss of control :smile:
[2020-12-05 21:48:07]
pingspike :
wtf :rolling_on_the_floor_laughing:
[2020-12-06 00:40:30]
mefisto :
It accidentally entered "floor is lava" mode instead of NFZ.
[2020-12-06 05:18:21]
deesparko :
didn't know thanks
[2020-12-06 05:29:10]
deesparko :
Is it just stuck in that mode even when no nfz zone nearby?
[2020-12-06 08:04:07]
kilrah :
it is in an authorization zone, but doesn't really get gps indoors - so i can take off, fly for a while until it finds out where it is and starts the 100sec forced landing countdown, it will likely lose/recover gps several times in the meantime
[2020-12-06 08:05:18]
kilrah :
at the end of the 100s i used full up stick to prevent landing and held it like that for a couple of minutes (point was to drain the battery...) and when i decided i was gonna land now and let it go it didn't and did that :stuck_out_tongue:
[2020-12-06 08:05:52]
kilrah :
so not sure exactly what caused it, either spotty gps, long up stick, or the combination of both
[2020-12-06 08:56:47]
deesparko :
did it fall when the battery was 0 or finish the landing? Also now is it always in that state? can you fly at least for several minutes until GPS is back?
[2020-12-06 10:47:09]
kilrah :
i just did the usual grab and flip to stop it. flies normally afterwards.
[2020-12-06 10:57:04]
deesparko :
I see, I hoped you would give him a change to crash :))
So, the mm2 is much quieter than the spark ) which is good, took off indoors
[2020-12-06 10:57:36]
deesparko :
very stable, better than the spark (indoors)
[2020-12-06 11:00:42]
kilrah :
yep a lot smoother flight
[2020-12-06 11:07:51]
deesparko :
I didn't like the remote, actually I like how it feels and its buttons layout, but its antennas are fixed in their position, so I'll have to point it vertically when the mini flies above me hence I'll have to hold it in front of my face in order to see the screen.
Plus the phone holder is quite cumbersome, time consuming, too stiff to put the phone fast w/o a fear to turn it off (because my phone power button is right below that bump....) )) or even worse to drop it...
The p4p has a better holder , the spark is like 1,2,3 and the phone is in )
[2020-12-06 11:10:45]
kilrah :
it's not a spark, you won't have to care about antennas at all.
[2020-12-06 11:11:06]
kilrah :
no need to point vertically or whatever.
[2020-12-06 11:11:55]
deesparko :
Hmm I thought it's directional, the manual says you should point it to the drone...
[2020-12-06 11:12:16]
kilrah :
if you want to go 2-4km away, yes...
[2020-12-06 11:12:54]
kilrah :
if you're above yourself you're more than close enough for it not to matter
[2020-12-06 11:13:33]
kilrah :
transmission quality with ocusync 2 is 10x better than the shit wifi on the spark
[2020-12-06 11:14:35]
deesparko :
I usually fly above myself high enough , but still on the spark I usually forget about antennas as no difference when flying close enough to myself
[2020-12-06 11:14:39]
deesparko :
[2020-12-06 11:16:00]
deesparko :
My spark is FCC boosted so usually I don't have problems within 500-1000m even when I sit in the car (RC is connected via WIFi, no cables)
[2020-12-06 11:16:58]
deesparko :
it's just to be sure when flying at long distances
[2020-12-06 11:17:57]
deesparko :
ANd found one good advantage over the spark, the camera can tilt up much higher... so I can shoot more of the sky, etc...
[2020-12-06 11:31:27]
deesparko :
I got 3 updates, the 0.64MB for the RCN1 I will ignore it for sure as I believe it's the one that breaks the gimbal (several comments above), as for the rest, not sure if they improve anything...
[2020-12-06 16:24:52]
kilrah :
i'm on latest and everything's fine
[2020-12-06 16:27:47]
deesparko :
good
[2020-12-06 16:37:09]
kilrah :
you can still downgrade anyway
[2020-12-06 16:38:04]
kilrah :
ah not sure about the remote
[2020-12-06 17:08:05]
deesparko :
after one flight outdoors made several conclusions ergonomically wise, I prefer the spark re size and design
cons of the mm2
those hanging props, I didn't know they can be so annoying now I understand why they add the rubber in the bundle... :))
the camera cap and the battery compartment... don't know who designed it but they are awful. Eventually either the cap or the camera will be broken, by me at least, because it's thin but so "sticky" and one should open it very carefully.. ))
the battery, don't try to open it if you have nails, I don't but still was not easy at first time
the power button with led indicators, Why TH is it on the bottom? Hard to find especially in dim lights and especially when I'm used to power the aircraft up on the ground
no wireless connection with RC, it's a big pro on the spark side. Now because of that I cant separate my phone and the remote when I need a spare hand.. (so that I could put them in different pockets)
the cable is not very easy to get out of the mm2 remote, not enough space for fingers (almost)
the remote is big, pockets are small, so now I should put it on the ground or find some other place if fast changes are required.
aircraft + remote take a bit more space in the same bag, almost no difference so it's more a marketing thing comparing to the spark.
but not the Mini 1, it wins in this regard as it has a smaller remote.
So as a result it takes 2-3 time more time to prepare the mm2 for shooting or even more, because the spark can be prepared within 10 secs. Battery in (very fast), Take off the lens cap (very easy and fast), Power up the RC, put in the phone, power up the aircraft
Pros. better jpgs (they almost look identical to the raws in Adobe Premier, except for the dynamic range) and raws exist, quieter, more stable indoors at least. I liked the 4K30fps video quality, nice to have especially then P4P is not with me
about stability, speed and control distance I can't tell for now, I've taken only 3 photos (AEB) outdoor because of the IMU calibration message (see below) and then I had no time...
P.S. the 1st flight outdoors asked me to calibrate IMU, didn't have the message indoors, probably the temperature difference, don't remember it on the spark even once. Because of that calibration I missed the shot )
re AEB mode, I don't like how it puts the ISO values as a priority target and changes the shutter speed only , so for all 3 frames it used the same ISO. The spark (or P4P) for example lower the ISO as much as possible and selects the shutter speed accordingly, so 3 frames could have different values
I'll test in this regard later because it's my preferable way of shooting on every camera if it allows, then the series (but they are absent here)
[2020-12-06 17:09:45]
deesparko :
I'll test it with the original FW first, at least I could see the difference after update if exists
[2020-12-07 10:07:57]
trulala69 :
You should have a look at the APP HDRPano once MM2 is supported by DJI SDK ... I had it for the MM as a replacment for taking panoramas and it was really, really good ...
[2020-12-07 10:25:18]
deesparko :
An easy DIY solution for fixing the props for the Mini1/2 if needed
Find any little plastic bottle, cut a stripe for about 1.5cm, it should fit in the hollow below, nice and tight. Easy to put on/remove
[2020-12-07 17:24:40]
quad808 :
Nice and simple solution!
[2020-12-08 16:03:24]
deesparko :
Ok, had a longer flight, temp. -6C, windy, near the river... low wifi signals (all FWs are stock)
at the 100m distance I had the connection message issue, antenna pointed to the drone. Although it was about 35-40m above the trees, so I thought I needed to get higher, started climbing and checked the antenna icon (increased from 1 bar to full)
OK at 200m I got the red messages, lost connection to the controller, reconnected some time later, made a 360deg turn, the message again right about 360 point...
While returning back it shown me the temperature warning and offered to accept all the sequences...
So now **I will cover those fake front sensors with a tape or any material to prevent cold air from entering inside, should help, especially during fast flights**
My spark does not have issues in that same area, it can fly in more cold temperatures
I didn't check the band the mini 2 used, I'll test it again later (probably after FW update).
seems it's the same issue
<https://www.youtube.com/watch?v=JL5e_NCzgTg&list=LL&index=2>
Positive sides )
Its horizon is rock solid when yawing even on fast turns, I was impressed, even my P4P has issues with fast turns and not that stable, my spark is a mess in that regard the horizon is always out of control (badly) when yawing, the faster the worse
I like how it holds the wind, probably better than the spark, did't test though in direct comparison
Probably should update the bird to the latest FW, although not sure if it improves anything
[2020-12-09 13:20:34]
deesparko :
the tape didnt help still shows the temp. warning, I hope it could resist the cold at least like the spark does otherwise it's a no go for me
[2020-12-09 14:56:28]
kilrah :
maybe cover the bottom vents?
[2020-12-09 14:56:53]
kilrah :
i've flown in 0°C with no issues, but i don't really go any colder :smile:
[2020-12-10 06:56:05]
deesparko :
yeah, will try them as well :slightly_smiling_face: will report later (they are so big that I didn't notice them LOL )
btw,
the specs on their site shows 32° to 104°F (0° to 40°C) for the P4P, the spark, the mini1/2, and so on... although I flew at -20-25C P4P :slightly_smiling_face: no issues, the spark at -15C , although they don't like humidity (like fog) and cold at the same time the P4P is Ok with it. but the spark could have a heart attack :slightly_smiling_face:
DJI 4Go app didn't have that temperature message, at least I've never seen it, so now (in Dji Fly app) they decided to add that in order to disclaim responsibility and to be able to void your warranty
[2020-12-11 21:23:52]
jcase :
anyone have board pics
[2020-12-11 21:23:54]
jcase :
of the mm2
[2020-12-12 16:47:33]
deesparko :
might be this would be helpful
he compares with mini 1 intertnals..
<https://www.youtube.com/watch?v=gAZ9xNrx7uU>
[2020-12-12 17:02:06]
deesparko :
Regarding my experiments with cold weather and mm2
taped down all the holes, no much difference, but it was -9C not -6C like before. it shows the temp. warning after 1-3 minutes, ignored that message. 14 minutes of 1 flight at -9C, no issues... Had 3 more flights at -10C till the low battery warning, no issues as well.
Updating to the new firmware didn't fix the "lost connection message issue" it happened even earlier this time, probably 30-40 meters away it just appeared on the screen (the orange one, not the red) and stayed there for a while although I could control the aircraft w/o noticeable differences apart from that message.
It was shown only once at the first take off, after that no such messages during next 3 flights.
[2020-12-12 17:07:26]
jcase :
thanks
[2020-12-12 17:12:18]
deesparko :
btw according to that comparison they both have identical camera modules
[2020-12-13 09:26:34]
t.a.shanker :
Hi anyone can help me the mounting path for mavic mini controller on mac? I couldnot find
```/dev/ttyACM0 ```
and i tried
```/dev/tty.usbmodem142201 ```
by tracking extra mounting when I connect to mavic mini controller but I am not able to ftp into the controller after following command
```./comm_serialtalk.py /dev/tty.usbmodem142201 --cmd_set=0 --cmd_id=1 --sender=1001 --receiver_type=31```
One question is can I connect to ftp of mavic mini controller when using connection via USB port or need ethernet cable for ftp.
If i can use via USB can help me understand what I am missing here. Thanks
[2020-12-13 09:35:30]
bin4ry :
IIRC the controller had no ftp
[2020-12-14 21:35:56]
kilrah :
1h30 of mm2 flight today :slightly_smiling_face:
[2020-12-15 00:06:56]
mel69hash :
With 3 batteries :grimacing:
[2020-12-15 00:08:18]
quad808 :
@kilrah Nice!
[2020-12-15 06:18:46]
deesparko :
-16C is fine with mm2 (knock on wood :slightly_smiling_face: )
255g with Mini1 battery, 239g with its own.
Mini1 battery charges fine.
The exposure compensation menu is good - very easy to use with a thumb
Has anyone been able to increase the landing speed in params by any method (the gentle mode substitution, etc.)?
[2020-12-15 08:17:19]
kilrah :
what do you mean by landing speed? I always disable the "landing protection" onmy dji aircraft so no automated landing
[2020-12-15 10:42:10]
deesparko :
vertical velocity
cfg_vert_vel_down
[2020-12-15 11:50:12]
kilrah :
ok so descent speed, then no you can't go beyond the 3m/s
[2020-12-17 10:58:14]
kilrah :
new mini2 firmware
[2020-12-17 10:58:28]
kilrah :
[2020-12-17 11:17:30]
kilrah :
antirollback still 0
[2020-12-17 12:11:23]
bin4ry :
perfect
[2020-12-17 12:13:48]
kilrah :
uploaded to ddd, i think someone needs to move it to the folder
[2020-12-17 12:13:59]
kilrah :
flashed fine with DH
[2020-12-17 12:15:07]
bin4ry :
birdmap udpated
[2020-12-17 17:47:31]
quad808 :
OMG...I feel so worthless. Had the Mini2 and have yet to do a maiden flight outside yet. Only did a hover indoors for about 10 seconds.
[2020-12-17 20:53:36]
deesparko :
notice any difference after update?
Windows or MacOS (DH)?
ta
I'll update later today or tomorrow...
[2020-12-17 21:11:42]
deesparko :
Ok, will update then and report back )
any advantages with DH over the FLY app atm (for updating), never used it, but wanted to try a MacOS version (I used DUMLdore for the Spark)
[2020-12-17 21:13:35]
kilrah :
No, updating normally through the app works just fine. I just wanted to test my bin before uploading it to DDD.
[2020-12-17 21:15:43]
deesparko :
got it, thanks )
[2020-12-18 07:34:23]
deesparko :
still not added to <http://dankdronedownloader.com/DDD2/app/ddd-check.php>
[2020-12-19 11:37:05]
cs2000 :
@kilrah thanks for the upload. Adding files is still a manual process as i have to verify the file then create the database entry :slightly_smiling_face:
[2020-12-19 13:51:46]
deesparko :
ok, tested the ..0700 fw, It's definitely better the connection I mean, no single connection warning even when pointing in the opposite direction. And by some reason I didnt get any cold weather messages at -13C, a 15min flight, in wifi and cellular area
[2020-12-21 05:48:02]
deesparko :
One very annoying issue of the mm2. When shooting in AEB mode it can lose visual connection up to 15 secs when saving (dng + jpeg). Probably depends on general connection quality, but it was within 70m. Even my spark did't have such long interruptions when saving jpegs. P4P does not loose visual feedback at all it just does not allow to shoot while saving dngs.
It was very frustrating, I could control the drone but no visual feedback for 10+ secs. Not sure if the new .0700 FW was the reason, didn't notice such long interruptions on the two previous FWs. There were interruptions but not that long.
They need to add dng only mode (I don't use jpgs at all with the mm2)
[2020-12-21 09:32:13]
heresmydron :
plus AEB (at least on MM and MA2) shifts ISO instead of shutter speed... so noise difference between frames will be wild... i always do my AEBs manually due to this...
[2020-12-21 09:46:06]
deesparko :
yeah, it's my first complaint here about mm2
[2020-12-21 16:40:52]
deesparko :
the connection is strong with mm2 after updating to FW 01.01.0700 :slightly_smiling_face:
2 more long flights at -15C, still no cold temp. messages! (nock on wood)
[2020-12-21 17:14:06]
kilrah :
cool
[2020-12-21 17:14:08]
kilrah :
will need to try
[2020-12-21 17:14:16]
kilrah :
when weather finally isn't shit anymore
[2020-12-23 02:25:32]
quad808 :
OMG. Thats all I can say about the Mini 2. Finally, FINALLY went for a flight today...maiden actually, well...except for a short spin up in the house. This thing is a keeper. Wicked fast. Quiet. Well...sort of. I could actually hear it 200' above when it moved. (just about zero wind today) Occusync 2.0. WOW.
[2020-12-27 09:05:59]
daemons.gr :
hi all, is anyone using an ipad pro with a mini1 ? I searched for longer cables (DJI control to USB C) but it seems that some cables dont work with ipad pro 2020. Any ideas or pointers? (EU/UK side or Aliexpress?)
[2020-12-27 09:10:49]
kilrah :
you just need an OTG cable and then you plug your usual Apple cable into it.
[2020-12-27 09:27:08]
daemons.gr :
hmm.. ipad pro comes with a C to C so I assume I can use OTG and then a generic USB to C? (like an gopro cable)
[2020-12-27 10:18:00]
kilrah :
yeah that should work
[2020-12-28 13:03:12]
kilrah :
new mini2 firmware again :slightly_smiling_face:
[2020-12-28 13:03:28]
kilrah :
[2020-12-28 13:11:12]
kilrah :
**warning** antirollback was bumped!
[2020-12-28 13:18:21]
kilrah :
new rc firmware as well, no bump there
[2020-12-28 20:30:01]
heresmydron :
maybe they are rolling out the changes for the new EU regulations
[2020-12-28 20:30:11]
heresmydron :
the reason for bumping the anitrollback i mean
[2020-12-28 23:40:47]
pawelsky :
They don't have to, MM2 already meets the new EU regulations.
[2020-12-29 09:55:00]
heresmydron :
im talking about broadcasting the drone id and that shite
[2020-12-29 09:55:26]
heresmydron :
they dont have to in theory but im sure they will add that feature anyway
[2020-12-29 09:59:39]
kilrah :
and of course it's on an update that fixes pretty important issues...
[2020-12-29 10:00:24]
kilrah :
haven't updated for now
[2020-12-29 14:13:39]
daemons.gr :
what the best place to get info on setting FCC as default (on EU quad) via the command line? (or maybe its better to go via some tools?)... TX power is not going to be really FCC levels but maybe a bit better (my signal is very week 50m away from the RC)
[2020-12-29 14:32:06]
pawelsky :
@heresmydron
> im talking about broadcasting the drone id and that shite
> they dont have to in theory but im sure they will add that feature anyway
There is no remote ID requirement for sub-250 drones, so no, they don't have to even in practice
[2020-12-29 16:01:20]
fun.day.cool :
I kid you not, I had a friend who had the spark; crashed it into a tree once superglued the prop arm back crashed it into a tree again (fell down 100ish ft) lost it in the rain and snow for a couple months we found it again, And I did some minor work on it (dusting everything off and re-inserting one of the circuit boards which and been disconnected) and the thing still flew.
[2021-01-01 11:18:35]
pingspike :
More firmware updates today?
v01.02.0100
[2021-01-01 11:28:35]
kilrah :
whoa?
[2021-01-01 11:35:51]
kilrah :
"improves overall stability"
[2021-01-01 11:36:03]
kilrah :
i.e. "we let a big bug slip through"?
[2021-01-01 11:47:56]
deesparko :
or a security patch ) anyway I will ignore both...
[2021-01-01 11:57:48]
kilrah :
it's a pain, i'm hesitating cause it fixes the DNG and video artifact bugs...
[2021-01-01 16:51:21]
pingspike :
confirmed re 4K artifact fix, works
[2021-01-02 09:21:28]
deesparko :
I use the Lightroom (Mac OS), no artifacts in DNGs (not a single one since the very first FW) already passed the 1000+ dng's mark, although never tried the pano mode
[2021-01-02 09:29:36]
deesparko :
Yeah it's a problem then. I shoot in manual pano mode 99% of the time :slightly_smiling_face: in AEB. If they added pano-AEB mode - that would be perfect!
[2021-01-03 15:20:58]
edo :
Does anyone know where DJI Fly apk stores new firmware package cache on Android? I don't see it anywhere :disappointed:
[2021-01-03 15:35:58]
kilrah :
in its data folder
[2021-01-03 16:20:27]
gregw :
To ensure that your Mini 2 firmware isn't updated from the app when flying, install afwall+ (<https://play.google.com/store/apps/details?id=dev.ukanth.ufirewall&hl=en&gl=US>) root required, to deny internet access to the DJI Fly app, or you can put the following in your hosts file..
0.0.0.0 [flysafe-api.dji.com](http://flysafe-api.dji.com)
0.0.0.0 [dji.com](http://dji.com)
0.0.0.0 [www.dji.com](http://www.dji.com)
0.0.0.0 [developer.dji.com](http://developer.dji.com)
0.0.0.0 [mydjiflight.dji.com](http://mydjiflight.dji.com)
0.0.0.0 [account-api.dji.com](http://account-api.dji.com)
0.0.0.0 [api.djiservice.org](http://api.djiservice.org)
0.0.0.0 [sentry.djiops.com](http://sentry.djiops.com)
0.0.0.0 [app-h5.dji.com](http://app-h5.dji.com)
0.0.0.0 [active.dji.com](http://active.dji.com)
0.0.0.0 [statistical-report.djiservice.org](http://statistical-report.djiservice.org)
0.0.0.0 [click.dji.com](http://click.dji.com)
0.0.0.0 [mimo.skypixel.com](http://mimo.skypixel.com)
0.0.0.0 [events.mapbox.com](http://events.mapbox.com)
[2021-01-03 17:16:51]
edo :
Thank you gregw, I know this possibility. I usually don't allow the apk fly to have access outside. (I usually use a phone without data and Wifi). I just wanted where is the cache for downloading the apk to check which modules and antirollback are used in the new update. The new firmware is only cached, I did not run the update itself on the plane.
[2021-01-03 17:23:45]
edo :
I searched the whole cell phone, but since it's not rooted, I'm probably unlucky ..
[2021-01-03 17:37:39]
kilrah :
yes you cannot access it if not rooted, nothing new
[2021-01-03 17:44:04]
edo :
TNX for confirm ;)
[2021-01-03 17:54:54]
pingspike :
any reason you're blocking mapbox @gregw ?
[2021-01-03 18:09:17]
heresmydron :
[events.mapbox.com](http://events.mapbox.com) is just a telemtry domain for mapbox. tiles are downloaded from another domain
[2021-01-03 22:26:37]
quad808 :
I use NetGuard, no root required, works great to block any app you want.
[2021-01-04 00:50:49]
mel69hash :
Does this non update could update the map when need on site. I fly with dedicated hp in offline mode and the map won't load until you hook up to internet. Does the above list of files prevent the map loading at site should I need to load the map. It requires one to hook up the internet for about 15 to 30 seconds to load the map but sometimes the update appears while waiting for the map to load.
[2021-01-04 08:11:01]
edo :
@gregw Yes, I cannot disagree with that.
[2021-01-05 08:18:25]
deesparko :
On Android 7 and later versions you can control network access per application. Settings -> Applications -> Select any app -> Data Usage and turn off all. Dont forget to restart the app if running (force stop in the app info page)
Also one can turn off 4G or WiFI before starting the app, then force close... (no maps in this case)
[2021-01-09 21:01:48]
quad808 :
The Mini 2 is quickly becoming my favorite drone. It is simply amazing.
[2021-01-10 05:46:47]
mel69hash :
Needless to say. Me too enjoying its portability and signal stability albeit wsiting for FCC if it could be implemented in CE region.
[2021-01-10 09:29:29]
validat0r :
Mini 2 has, too, different hw versions for fcc and ce countries?
[2021-01-10 10:10:42]
pingspike :
not that I’ve seen... the 1 did but I don’t recall seeing two different model numbers for the 2? :thinking_face:
[2021-01-10 10:12:06]
pingspike :
On DJI “specs” page for the 1:
Transmission Power (EIRP)
Model MT1SS5
5.8 GHz: <30 dBm (FCC); <28 dBm (SRRC)
Model MT1SD25
2.4 GHz: <19 dBm (MIC/CE)
5.8 GHz: <14 dBm (CE)
[2021-01-10 10:12:31]
pingspike :
it lists the model numbers there
[2021-01-10 10:12:39]
pingspike :
but for the 2:
Transmitter Power (EIRP)
2.400-2.4835 GHz
FCC ≤ 26 dBm
CE ≤ 20 dBm
SRRC ≤ 20 dBm
5.725-5.850 GHz
FCC ≤ 26 dBm
CE ≤ 14 dBm
SRRC ≤ 26 dBm
[2021-01-10 10:12:53]
pingspike :
So I’m guessing only one model this time :+1::skin-tone-2:
[2021-01-10 18:02:16]
quad808 :
I think that the Mavic Mini came out with 2 different RC's, but the drone itself is the same, either FCC or CE. I could be wrong on this, but know for sure that there are two different RC's. Since the Mini 2 uses the Mavic Air 2 RC, I would suspect them all to be the same. Cost savings. I don't have direct info though.
[2021-01-10 20:43:29]
pawelsky :
@quad808 Incorrect, Mini 1 has FCC/CE versions for both RC (MR1SS5/MR1SD25) and the drone itself (MT1SS5/MT1SD25). Mini 2 has one RC/drone HW version for both FCC and CE.
[2021-01-11 21:39:33]
heresmydron :
plus the air 2 RC is compatible with the mini 2 AC if im not mistaken
[2021-01-12 13:35:37]
pingspike :
didn’t they release a firmware update to make it compatible?
[2021-01-12 21:27:44]
heresmydron :
yep
[2021-01-18 11:48:19]
elintnl :
<https://ufile.io/f1qa3q4m>, mavic mini skin,gents
[2021-01-18 12:01:28]
elintnl :
<https://ufile.io/kfsryr2q>
[2021-01-19 12:43:12]
edo :
An interesting battery from China (3600mAh) for Mini 2. Hovering time cca 39.5 minutes
[2021-01-19 12:43:39]
edo :
<https://youtu.be/ISd-EvOznvY?t=56>
[2021-01-23 16:29:55]
mel69hash :
Can anybody enlighten me of MM2 antennas. I know its a dual band antennas. Is it both left & right will switch to automatically or it is a single band to either left or right. Thx
[2021-01-23 23:58:00]
mel69hash :
Thx @mefisto. I read your reply as it is a dual band on TX & RX antenna with auto switch function when required based on chip. Hence if I wants to install a dual amp I shall install on the TX side. For MM2 where is the TX antenna. Left or right. Thx much
[2021-01-26 01:53:30]
william.markezana :
<http://aeropic.free.fr/B0B/>
[2021-01-26 01:54:08]
william.markezana :
<https://www.youtube.com/watch?v=pL0dGoH2AC4>
[2021-01-26 09:37:36]
validat0r :
Nice.
[2021-01-26 11:28:17]
mefisto :
Great project!
It shows the same value as voltage and temperature. Would use some updates to the programming.
[2021-01-26 13:41:40]
validat0r :
I think he does that intentional ..
[2021-01-26 14:34:24]
mefisto :
Pity the software is closed. Looks like the idea is to sell DIY kits with pre-programmed uC, but there's no pricing? A bit suspicious.
[2021-01-26 14:43:01]
validat0r :
just asked: it's 15€ for the uC, +5 for PCB, +10 for complete kit, +15 for soldering and pretesting, +5 shipping.
[2021-01-28 08:10:56]
flylusive_pat :
I'm Aeropic's good friend, yes he doesn't plan to make the code open-source. Actually it's not that hard to simulate the SMBus traffic. But that won't work on battery_type 1.
[2021-01-28 20:59:21]
flyingkite :
Which app version are you running and which platform (IOS or Android)? Also, what firmware do you have installed? I just got a mini 2 and RC is running 02.00.1000 and AC 01.01.0400
[2021-02-24 01:33:34]
hitarth06.hp :
Hi guys, new here. Is there any way to enable 4k recording and raw images on the MM? Sorry if this is a dumb question
[2021-03-04 09:51:13]
elintnl :
new firmware for the mini 2
[2021-03-04 09:51:17]
elintnl :
**Overview:**
• Date: 2021.03.04
• Aircraft Firmware: v01.02.0300
• Remote Controller firmware: v02.00.1200
• DJI Fly App iOS: v1.3.0
• DJI Fly App Android: v1.3.0
**What’s New?**
• Added ability to control orientation of aircraft when flying forward during RTH.
• Fixed rare issue: aircraft drifted during flight.
• Fixed rare issue: gimbal vibrated when aircraft descended during RTH.
[2021-03-04 15:33:26]
bin4ry :
did anybody update the firmware already ? i am searching for mini dronehacks parameter export files for different firmwares
[2021-03-04 15:33:52]
bin4ry :
mini2 sorry
[2021-03-04 15:33:56]
bin4ry :
mini is good too
[2021-03-04 15:34:16]
bin4ry :
would love to have mini and mini2 frmware parameter exports from all firmwares
[2021-03-09 23:09:08]
clauto :
@clauto has joined the channel
[2021-03-09 23:09:16]
validat0r :
@clauto..
[2021-03-09 23:10:12]
clauto :
yea it’s the only thing that actually makes sense for why it its distance remained fixed while its altitude dropped. asking it to go full bore into the wind and it then prioritizing not losing altitude, while still trying to come forward.
[2021-03-09 23:11:20]
validat0r :
there's g_config.mode_sport_cfg_tilt_atti_range, which is 30 by default. you can increase that one to like 60 for more force in sport mode
[2021-03-09 23:11:39]
validat0r :
you can use comm_of_service_[tool.p](http://tool.ps)y in the dji-firmware-tools to accomplish that.
[2021-03-09 23:11:47]
validat0r :
might work, too, on mini2
[2021-03-09 23:12:15]
validat0r :
I wouldn't fly without the knowledge the AC is willing to give it all in sport mode if I tell it to
[2021-03-09 23:12:52]
clauto :
coool, thaks, works by letting it tilt further into the direction?
[2021-03-09 23:12:57]
validat0r :
yes ..
[2021-03-09 23:13:21]
validat0r :
so it will lean more into the wind if it has to.
[2021-03-09 23:13:38]
validat0r :
otherwise it will drift away or, like in your case, lose altitude
[2021-03-09 23:13:55]
kilrah :
in this case it wouldn't have changed anything though
[2021-03-09 23:14:07]
validat0r :
you think?
[2021-03-09 23:14:27]
kilrah :
tilt more = less upwards thrust and there already wasn't enough of that
[2021-03-09 23:14:31]
clauto :
i think that may exacerbate this particular issue
[2021-03-09 23:14:36]
validat0r :
because rear props at 15k?
[2021-03-09 23:14:39]
validat0r :
well maybe
[2021-03-09 23:14:58]
clauto :
it would have fallen faster heh
[2021-03-09 23:15:52]
clauto :
if I just let go of that forward stick I think it would have been able to climb.. I had no clue exactly how close to land I was so was trying to get over land before it came down/died
[2021-03-09 23:16:01]
validat0r :
look at IMU_ATTI:pitch .. not so steep as one would think in that situation at the end..
[2021-03-09 23:16:27]
kilrah :
yeah cause it was limiting itself due to the motors being maxed
[2021-03-09 23:22:28]
validat0r :
one further question: was it like very cold? I can remember one flight with my MP1 when I went into the clouds in winter and the performance became very bad .. after landing I noticed ice accumulated on the props ..
[2021-03-09 23:23:28]
clauto :
noope qiute nice out
[2021-03-09 23:24:20]
validat0r :
ok.
[2021-03-09 23:26:46]
clauto :
[2021-03-09 23:27:36]
validat0r :
oh shit
[2021-03-09 23:28:12]
validat0r :
water doesnt look like very strong wind though .. even like wind from behind if I should take a guess
[2021-03-09 23:30:06]
validat0r :
that's very odd .. I mean the vps did recognize the water .. at the end you can see 3,2m -> 1,8m on vps sensor .. plus wind shoud have been less strong on lower altitudes .. so why didn't it even slow it's descend .. :smile:
[2021-03-09 23:30:35]
clauto :
at the time I was certain it was auto land by its behaviour
[2021-03-09 23:30:46]
clauto :
becaue it wooldnt come forward and it had a fixed rate of descent
[2021-03-09 23:30:57]
clauto :
but it just couoldnt make the lift when asked to go full speed forward
[2021-03-09 23:31:18]
validat0r :
.DAT files says "GOHOME", but not AUTOLAND or sth
[2021-03-09 23:31:38]
clauto :
yep it kicked on gohome ~ 40%
[2021-03-09 23:31:51]
validat0r :
it says you pressed RTH button right at the end.
[2021-03-09 23:31:58]
clauto :
thjank a lot for help analyzing
[2021-03-09 23:32:09]
clauto :
yep I was like why isnt it coming here.. lol
[2021-03-09 23:32:24]
validat0r :
yeah, smart go home at first, then you cancelled until right at the end when RTH button .. maybe panic
[2021-03-09 23:32:45]
clauto :
it actualyl said wind warnigs to ohigh return to home manually
[2021-03-09 23:32:48]
clauto :
then ya panic at end
[2021-03-09 23:32:59]
validat0r :
nice mystery .. I love it .. but have to hit the hey .. cheers
[2021-03-09 23:33:29]
clauto :
this makes me feel a bit better about the whole situation, I was thinking the thing forced autoo land with 22% cuase of wind. and was really annoyed at dji programming, this feels a bit better, and some user error
[2021-03-09 23:33:31]
clauto :
night!
[2021-03-09 23:34:06]
validat0r :
plus, csv view is getting to large
[2021-03-09 23:34:10]
validat0r :
:smile:
[2021-05-22 12:44:18]
trulala69 :
Are there obscure reasons not to upgrade a MM2 to 01.02.0300 except the incremented antirollback value?
[2021-05-22 13:15:28]
bin4ry :
paramters got locked down more i think IIRC
[2021-05-22 13:15:37]
bin4ry :
but not sure which would need to take a look
[2021-05-22 13:16:05]
bin4ry :
battery type most likely and ranges . that would be the usual dji move
[2021-05-23 07:59:50]
trulala69 :
Thanks! I think @asdrubale made some FW parameter range comparisons, but from my memory the MM2 was pretty locked down from the beginning…
[2021-05-23 08:11:53]
tmbinc :
Out of curiosity, what parameters would be interesting to change and are locked down in MM2?
[2021-05-23 12:43:57]
oakley75 :
Climb/decent speed is always a loved one
[2021-05-24 11:54:25]
mel69hash :
Please be informed if you have MM1, do not upgrade to latest FW. You will be block from using MM2 bat. My friend yesterday updated his MM1 to latest FW and he cannot use the MM2 battery on MM1. He can use it the day before.
[2021-05-24 14:37:37]
tmbinc :
Does a MM2 battery physically fit into an MM1? I thought it's only supported the other way around.
[2021-05-24 19:54:27]
asdrubale :
no , but you can replace the frame mini 1 with frame mini 2. and than battery mini 2 will fit in mini 1, but in any case the mini 2 battery will be not recognize by mini 1 you need to modify bms
[2021-05-24 19:56:21]
asdrubale :
yes you remember well unfortunately some note are in italian
[2021-05-25 01:12:12]
mel69hash :
@asdrubale yes, Mini 1 housing cannot fit MM2 bat. Either have to trim the MM2 bat housing or swop the MM1 housing to use with MM2 housing then MM2 bat can be used but after latest FW update MM2 bat will not be recognized by MM1 AC.
[2021-05-25 10:04:32]
cadbob :
too much work for a battery lol
[2021-05-25 20:43:12]
asdrubale :
my mini 1 modded to insert not only mini 2 battrey but also air 2 cells
[2021-05-25 20:46:18]
asdrubale :
[2021-06-05 13:25:31]
tmbinc :
So, Mini SE. Obviously the "It's a mini1 with just another RC" narrative is stupid because you need the S1 chip for OcuSync, as the RC231 obviously doesn't support wifi.
So is this just a Mini2 with software limitations on transmission power and resolution?
[2021-06-05 16:16:45]
mefisto :
I have a feeling it will have old style RC. In the past, "SE" meant just cost reduced.
[2021-06-06 15:26:04]
pingspike :
@mefisto this may confirm
[2021-06-06 15:29:19]
tmbinc :
Thanks!
[2021-06-06 15:32:06]
mefisto :
Dji now pushes new style rc, but if they go cheap on its battery, the large one would weight too little. That would make the rc feel cheap. That's the base of my claim.
But we'll see, there were photos both ways.
[2021-06-06 17:18:48]
oakley75 :
Expected price point?
Sounds liked DJI may be reissuing "deadstock" Mini 1's as a new SE...
[2021-06-06 21:02:04]
pingspike :
USD$299
[2021-06-06 22:28:26]
oakley75 :
Hmm seems perfect. Gonna really hit the masses now.
[2021-06-21 15:01:32]
royeiror :
Can the Mavic Mini 1 Batteries be charged in the Mini 2 multiple charger? I've read the pros and cons and would be interested in having a few MM batteries for when the flight is not guaranteed to be the same day the batteries are charged
[2021-06-24 21:29:36]
dnacho :
Has anyone had a dji mavic mini 1 that still shows gimbal calibration error even after calibrating the gimbal on the special fw version?
[2021-06-25 18:42:48]
royeiror :
Hello guys, has anyone modified Flight Parameters on Mini 2? If so, what parameters are available to modify?
[2021-07-05 12:37:18]
luluminjeong15 :
Does anyone have DJI Mini2 controller firmware file? How can I get it?
[2021-07-05 18:38:15]
chipmangini :
@luluminjeong15 !ddd
[2021-07-08 16:31:57]
dnacho :
does anyone know from where does the navigation system error come on the mavic mini 1?
[2021-07-08 19:02:19]
tmbinc :
I'm really curious as well about these error paths. Best bet for more diagnostics is to enable assistant connection via DUML and listen to the FC log messages. (Do we have an easy solution for this? I tend to use hacked dji-firmware-tools)
[2021-07-27 14:31:34]
patrick :
Use DronHack. There you can change a lot of that.
[2021-07-27 14:32:25]
patrick :
In DDD but with controller for Mavic air 2. Is the same
[2021-08-01 23:41:23]
mefisto :
> do we have an easy solution for this? I tend to use hacked dji-firmware-tools
I didn't captured DUML for like two years now.. but when I was doing it, I captured to binary files (just cat'ing or tee'ing or writing PuTTY log file) without analysis, and then used `comm_dat2pcap.py` to make pcap and look at the data in Wireshark.
[2021-08-02 06:58:55]
tmbinc :
But don't you need to send from the "PC" (=DA2) address every ~10 seconds so that the DA2 connected state stays? Otherwise it doesn't log FC messages to that port.
(Sure I could look at FC logs but I rather prefer them in realtime)
[2021-08-02 07:31:46]
mefisto :
I did that on older platforms, they didn't needed any heartbeat. So your hack may be the best solution there is, ATM.
[2021-08-09 21:39:42]
tmbinc :
Any idea how to get a TCP connection to a Mini2 over non-USB? I thought about QuickTransfer mode where it opens a Host AP but "it doesn't work" - after pressing the connect button for a while (so it fades blue), in /tmp/hostapd.conf there is "ssid=DJI-MINI2-5DCAFC" but I don't see that SSID, just another 8-hex-chars one. But even if I try to connect to that with the password from the hostapd.conf, it still doesn't work (association even fails, I think).
[2021-08-09 23:34:11]
tmbinc :
Ok nevermind, I seem to just fail.
[2021-08-18 17:45:47]
flymymavic :
You can change the frequency to 2.4 in the app if you are having issues
[2021-10-28 15:24:33]
eddy :
eddy joined the channel.
[2021-10-28 22:27:53]
doctor :
doctor joined the channel.
[2021-10-30 12:21:22]
jj :
madmaqx joined the channel.
[2021-10-31 00:23:02]
will :
will joined the channel.
[2021-11-02 09:00:18]
cs2000 :
dji-rev-bot added to the channel by cs2000.
[2021-11-03 16:03:44]
deesparkom2 :
deesparkom2 joined the channel.
[2021-11-05 15:26:12]
dave0x6d :
dave0x6d joined the channel.
[2021-11-09 11:01:36]
max_ :
max_ joined the channel.
[2021-11-21 21:49:52]
lazypilot :
lazypilot joined the channel.
[2021-11-24 14:54:55]
dnacho :
Has anyone been able to remove the bell from a mavic mini motor?
[2021-11-28 00:29:12]
tissy :
tissy joined the channel.
[2021-11-30 21:27:49]
tobi :
tobi joined the channel.
[2021-12-10 08:21:59]
il1oo0 :
il1oo0 joined the channel.
[2021-12-17 20:08:05]
copyleft :
copyleft joined the channel.
[2022-01-02 00:01:23]
rameezahmed1998 :
Hello everyone i want to downgrade fw 0600 to 0500 mabe antirolback issue
[2022-01-03 10:10:57]
elintnl :
Litchi beta is out with new sdk for mini2, now able to fly the mini 2 with waypoints etc.
[2022-01-03 10:11:01]
elintnl :
https://youtu.be/0xQ-iFi5Gaw
[2022-01-07 13:01:56]
oakley75 :
Virtual stick waypoints I assume?
[2022-01-07 16:59:38]
elintnl :
When you lost connection the mini 2 and other newer drones goes in RTH, the old drones like the Mavic Pro continue the mission , even when shut down the RC.
[2022-01-07 17:00:40]
elintnl :
It's blocked in the fw, the Litchi guys said that.
[2022-01-07 22:31:08]
oakley75 :
Oh wow, I thought it was a hardware issue. That means there's hope :thinking_face:
[2022-01-09 19:49:18]
tmbinc :
As far as I know, the Mini 1 and Mini 2 Flight Controller simply does not have any waypoint mission code. But of course it's software issue, but hard to change (i.e. not just something you can do over DUML).
[2022-01-13 15:11:17]
idzik :
idzik joined the channel.
[2022-01-24 08:25:59]
elintnl :
|https://ufile.io/px6hl91p|
|---|
found a
litchi beta version build 3951, old version which is free to test for your Mini. NOT for mini 2 !!
[2022-01-24 19:50:12]
chaton78 :
chaton78 joined the channel.
[2022-01-26 22:28:46]
greatpanda :
greatpanda joined the channel.
[2022-01-31 08:47:49]
jackmax :
jackson joined the channel.
[2022-02-09 16:48:28]
djifans :
djifans joined the channel.
[2022-02-11 13:17:37]
socializednerd :
socializednerd joined the channel.
[2022-03-11 21:33:26]
gariful :
gariful joined the channel.
[2022-03-13 14:54:06]
zgvs2 :
zgvs2 joined the channel.
[2022-03-13 14:56:53]
zgvs2 :
Hey man, any chance you could share this file again, the link expired :) I'de really like to try litchi on my MM :)
[2022-03-14 05:47:50]
oakley75 :
I've been with Litchi since the beginning (P2V+), and you've always needed to purchase... beta or not.
[2022-03-14 08:01:29]
zgvs2 :
Thanks for the warning! Maybe the guy had purchased litchi on his Google account and it was auto approving it without him knowing.
[2022-03-14 09:59:31]
elintnl :
new update Litchi for trial, you like it buy it :stuck_out_tongue_winking_eye:
[2022-03-14 09:59:57]
elintnl :
https://ufile.io/pfgu6920
[2022-03-14 10:00:32]
elintnl :
Mini 1 and 2
[2022-03-14 10:21:06]
elintnl :
Fully active and options, only when you want to save mission and load you need to log in.
[2022-03-15 21:42:14]
tmbinc :
Has anyone spent some time on reversing the Ambarella boot sequence in NAND (amboot, ...)? I know how to enter USB boot mode on the ambarella CPU and perhaps we could build a reflash solution.
[2022-03-19 05:49:03]
velhojow :
velhojow joined the channel.
[2022-03-20 20:25:13]
hrisfpv :
hrisfpv joined the channel.
[2022-03-21 10:08:39]
elintnl :
https://ufile.io/3jrhd7rv
[2022-03-21 15:45:28]
oakley75 :
Kinda sketchy there, did you patch this or a random apk found online?
[2022-03-21 15:45:28]
oakley75 :
Feels kinda sketchy there, did you patch this or a random apk found online?
[2022-03-21 18:11:08]
pingspike :
is that the same cracked version that harvests all the contacts on your phone in the background @elintnl ?
[2022-03-21 19:37:25]
cs2000 :
It better not be! ?
[2022-03-22 08:54:20]
elintnl :
Same as original litchi
[2022-03-22 15:58:11]
oakley75 :
May I ask why you added "patched" to it? The latest beta is 4.22.0 just fyi
[2022-03-23 06:16:55]
elintnl :
I don't use beta versions, full of bugs :laughing:
[2022-03-23 09:10:40]
oakley75 :
Alpha's yes, but Litchi beta's are pretty legit. IMO
[2022-03-24 04:15:45]
mrbou :
mrbou joined the channel.
[2022-04-04 16:00:20]
sdfsf :
test_crack joined the channel.
[2022-04-06 16:02:39]
sdfsf :
@sdfsf left the channel.
[2022-04-09 05:01:15]
alxgacc :
alxgacc joined the channel.
[2022-04-12 02:09:40]
dnacho :
Has anyone fixed a mavic mini where the status light doesn’t turn on?
[2022-04-14 08:00:36]
jackhmcd :
jackhmcd joined the channel.
[2022-05-22 23:30:48]
monkeyman :
@#@#@#!#!!@#!#@
[2022-05-23 20:47:43]
jjbyrnes29 :
jjbyrnes29 joined the channel.
[2022-05-23 22:31:50]
poopnondji :
Does it have oem unlock toggle in dev settings?
[2022-05-25 13:56:14]
squeck :
squeck joined the channel.
[2022-05-28 05:33:04]
alex1981 :
alex1981 joined the channel.
[2022-06-18 14:36:08]
testuser00001 :
testuser00001 joined the channel.
[2022-06-24 16:14:30]
elintnl :
Overview:
Date: 2022.06.17
Aircraft Firmware: V01.05.0000
Remote Controller firmware: V04.11.0034
DJI Fly App iOS: V1.6.6
DJI Fly App Android: V1.6.6
What’s New?
Added Support for Japanese RID requirements (requires DJI Fly v1.6.6 or later).
[2022-06-24 16:15:01]
elintnl :
new mini 2 firmware, watch out with new app, it force you to update
[2022-06-27 01:16:56]
airsheen :
airsheen joined the channel.
[2022-07-09 20:07:08]
ixoid :
ixoid joined the channel.
[2022-07-16 08:50:40]
xou :
xou joined the channel.
[2022-07-19 03:54:03]
enk2022 :
enk2022 joined the channel.
[2022-07-24 13:44:43]
argonaut :
argonaut joined the channel.
[2022-07-25 20:35:32]
negenii :
negenii joined the channel.
[2022-08-02 16:02:33]
steemax :
steemax joined the channel.
[2022-09-01 14:22:31]
anesta :
anesta joined the channel.
[2022-09-10 01:13:26]
ylml :
ylml joined the channel.
[2022-09-19 07:39:39]
urca87 :
urca87 joined the channel.
[2022-09-27 10:49:20]
herr.frei :
herr.frei joined the channel.
[2022-09-28 13:58:51]
mm155wf :
mm155wf joined the channel.
[2022-10-16 11:05:59]
jack117wb :
jack117wb joined the channel.
[2022-10-18 11:50:12]
jandersson :
jandersson joined the channel.
[2022-10-22 00:13:43]
ahizek :
ahizek joined the channel.
[2022-10-31 20:44:28]
markus83 :
markus83 joined the channel.
[2022-11-30 12:10:48]
micronica :
micronica joined the channel.
[2022-12-01 17:27:37]
bendernet :
bendernet joined the channel.
[2022-12-05 07:19:06]
prettymuchathrowaway69 :
prettymuchathrowaway69 joined the channel.
[2022-12-17 19:08:54]
ronenha :
ronenha joined the channel.
[2022-12-27 15:16:36]
baxove :
derowey joined the channel.
[2023-01-04 06:11:01]
kaleongo :
kaleongo joined the channel.
[2023-01-07 10:25:30]
vjustme :
vjustme joined the channel.
[2023-01-15 20:24:57]
o0raq0o :
o0raq0o joined the channel.
[2023-01-15 20:30:31]
o0raq0o :
Is it possible to downgrade DJI mini 2 1.06.02 (ARB 4)?
[2023-01-21 14:28:59]
flymymavic :
No you can only use a FW with equal ARB
[2023-01-28 20:23:14]
jglx3p :
jglx3p joined the channel.
[2023-02-07 22:29:43]
accountfrompl :
accountfrompl joined the channel.
[2023-03-02 00:08:44]
ibndias :
ibndias joined the channel.
[2023-04-02 21:45:04]
tacticaltot :
tacticaltot joined the channel.
[2023-04-08 06:10:30]
gudvin :
gudvin joined the channel.
[2023-04-08 06:11:39]
gudvin :
@gudvin left the channel.
[2023-04-11 15:45:11]
blowfish448 :
blowfish448 joined the channel.
[2023-04-12 17:55:19]
scoobsteve :
scoobsteve joined the channel.
[2023-04-19 16:56:27]
k_k :
kulkraus joined the channel.
[2023-04-27 11:09:41]
r3v0k3r :
r3v0k3r joined the channel.
[2023-05-05 13:16:17]
jay :
jay joined the channel.
[2023-05-05 13:17:09]
jay :
hi o0raq0o, no, at the moment it is not possible to do that :(
[2023-05-05 14:45:53]
theminer :
theminer joined the channel.
[2023-05-08 22:52:14]
andrej :
andrej joined the channel.
[2023-05-12 16:28:22]
dnacho :
Hey group
has anyone had a problem where you cannot turn a mavic mini 2 on. The first button press does turn the lights on, but the second one does nothing
[2023-05-27 05:22:25]
drmsucks :
drmsucks joined the channel.
[2023-05-29 21:34:31]
brillio :
brillio joined the channel.
[2023-06-11 01:13:48]
milenovic :
milenovic joined the channel.
[2023-06-14 13:57:43]
lorebene99 :
lorebene99 joined the channel.
[2023-06-14 14:01:12]
sickmanny :
sickmanny joined the channel.
[2023-06-14 14:04:03]
sickmanny :
Good afternoon,
I am Andrea, a student from Italy, Genova, who, together with three other students, is currently developing a project in the field of robotics engineering. In summary the objective of the project is to develop a software to manage UAV fleets autonomously from a ground control station. At this stage of the project we are working with DJI Mini 2 drones and we managed to have more than one drone autonomously flying waypoint missions loaded from PC using the RCs as a bridge between the PC and each drone, in particular to do so we are using Rosetta Drone running on the smartphones connected to the RCs (an open source Github project) and QGroundControl as GCS on the PC. For the next step we would like to transfer what is done by Rosetta on the PC, communicating with the drones using an external antenna connected to the PC, but to do so, keeping the possibility of taking manual control when the RCs are turned on (for safety reasons), we need to have the drones working even without RC, which is now not possible. If you have any advice we would be grateful.
[2023-06-14 14:58:18]
tmbinc :
There's no trivial way to control the drones without stick input - virtual or physical - as the flight controller does not support waypoints. However, it supports a "navigation" mode where code on the Ambarella (Linux/Camera) part controls the drone; this is e.g. used for quickshot modes. Have you looked at this mechanism? It's possible to get root on the drone, so you could bring in your own "navigation" core. Would involve a fair amount of reverse engineering though.
I don't know the architecture of rosetta drone, but you could also basically build your own "dji fly"-style app and use an RC to transmit it. (Replacing the RC is probably a lot of work since you'd need to implement OcuSync yourself, and I don't think you gain much over just using a stock remote)
[2023-06-14 15:09:11]
jcase :
Rosetta Drone is android, I was one of the original engineers on it before it went open source
[2023-06-19 23:42:24]
martymcfly :
martymcfly joined the channel.
[2023-06-21 12:35:05]
lorebene99 :
Hi, I have bought a drone (DJI MINI 2) from a private client and I want to connect MY RC, since I have already one, to it, but I'm facing some problems in binding it. In fact the drone is already associated to another account, so does anyone know how to unbind it and connect to my RC? Thank you in advance.
[2023-06-21 16:19:36]
lolo780 :
Have the owner unbind it
[2023-07-06 17:13:30]
tstotch :
tstotch joined the channel.
[2023-07-24 02:57:23]
dji-rev.concierge132 :
dji-rev.concierge132 joined the channel.
[2023-07-28 14:24:40]
smartjq :
smartjq joined the channel.
[2023-08-01 13:51:48]
crashing_bird :
crashing_bird joined the channel.
[2023-08-02 14:48:01]
manoela :
manoela joined the channel.
[2023-08-24 18:57:31]
bengutt :
bengutt joined the channel.
[2023-08-26 18:50:22]
dereksynkopa :
dereksynkopa joined the channel.
[2023-09-13 10:14:56]
molda :
molda joined the channel.
[2023-09-20 15:39:15]
johndohn :
johndohn joined the channel.
[2023-09-26 17:04:23]
johndohn :
Have there been any developments (or planned ones) for hacking the Mini 2 on the latest firmware (01.07.0200). I bought a used one and it's already updated to the latest firmware and can't rollback past ARB 5.
[2023-09-27 09:57:12]
sparkyws :
Check DH Birdmap ?
[2023-09-27 15:44:13]
johndohn :
Sorry, I didn't clarify, I know that NFZ hack works but I'm more curious about getting access to the filesystem using ABD.
[2023-09-27 17:15:37]
tmbinc :
Technically you can downgrade flight controller firmware (0306) and then use symmetric secure debug unlock to get ADB
[2023-09-27 19:56:13]
johndohn :
That's helpful, I'm guessing you mean this version in the screenshot I attached? Drone-hacks says not to manually flash to this, do you think there's a specific reason for that? From what I've seen there are only two models of the mini 2, one for international and one for japan - I didn't see any information about specific generations. Also, I double checked and antirollback value is 4, which I think coincides to firmware 1.04.0000? If so, I can't tell if this guide (https://wiki.dji-rev.com/howto/dumlracer) applies to mini 2.
[2023-09-27 19:56:13]
johndohn :
That's helpful, I'm guessing you mean this version in the screenshot I attached? Drone-hacks says not to manually flash to this, do you think there's a specific reason for that? From what I've seen there are only two models of the mini 2, one for international and one for japan - I didn't see any information about specific generations. Also, I double checked and antirollback value is 4, which I think coincides to firmware 1.04.0000?
[2023-09-28 20:41:36]
oakley75 :
there are two gens of the same model from what i understand
[2023-10-04 09:56:02]
lorebene99 :
I am currently working with Matrice 210 v1 using a Raspberry pi 4b as on board computer, as part of my project I am developing a system which giving as input a file containing coordinates builds an area within which the drone operates and from which, under normal conditions, it should not exit, at the moment I am able to retrieve telemetry and so I am able to check if and where the drone is located in the previously mentioned area, I am also able, in conditions that lead for example to a momentary failure of the GPS, to kill the drone if it goes outside the area. Now if the drone reaches the edges of the zone I would like to inhibit the commands received from the RC if they bring the drone outside the area, I think, correct me if I'm wrong, that does not exist any specific API to inhibit the execution of the commands received from the RC, am I right? If so, I was thinking about alternative solutions for this problem and I was thinking to somehow get the commands received from the RC and, if they bring the drone outside the area, execute the opposite command through my on board computer, do you think that this could be possible? If this is the case can you please suggest me the API to do so? Thank you.
[2023-10-06 12:22:06]
lorebene99 :
Sorry, do you know at which frequency rate the radio controller sends the commands to the drone? (Drone: Matrice 210 RTK V1). Thank you!
[2023-10-15 20:50:20]
dumldore_newbi :
dumldore_newbi joined the channel.
[2023-10-22 06:32:45]
eseven :
eseven joined the channel.
[2023-10-28 00:13:43]
ildefonso :
ildefonso joined the channel.
[2023-11-20 18:03:35]
kirk22 :
kirk22 joined the channel.
[2023-11-20 21:39:15]
kirk22 :
I successfully removed the 40011 error on my Mini FW: 1.00.0600 that showed up after running comm_og_service_tool.py. Before running the python script, I was trying to fix a 5 degree gimbal tilt. After running the script, I had a 5 degree tilt and the annoying error message. Calibration and re-flashing didn't work and I could not downgrade to any earlier firmware versions.
I took a chance and downloaded the firmware 90.00.0026 in DankDroneDownloader (Thanks cs2000). I flashed the Mini, ran the gimbal calibration, and then flashed the current official DJI firmware onto the mini. It worked!!
I flew a battery and the gimbal is now level and the error message is gone ... so far. I'll report back it it returns.
[2023-11-20 21:39:15]
kirk22 :
I successfully removed the 40011 error on my Mini FW: 1.00.0600 that showed up after running comm_og_service_tool.py. Before running the python script, I was trying to fix a 5 degree gimbal tilt. After running the script, I had a 5 degree tilt and the annoying error message. Calibration and re-flashing didn't work and I could not downgrade to any earlier firmware versions.
[2023-12-27 12:34:47]
latex :
latex joined the channel.
[2024-01-02 00:20:07]
pdillie25 :
pdillie25 joined the channel.
[2024-01-18 01:08:14]
enk2022 :
@enk2022 left the channel.
[2024-01-26 17:23:02]
xquatz :
xquatz joined the channel.
[2024-02-06 19:59:17]
ryantkasher :
ryantkasher joined the channel.
[2024-02-09 09:44:37]
s1m0n :
s1m0n joined the channel.
[2024-02-10 18:56:03]
otter :
otter joined the channel.
[2024-02-12 03:54:49]
dart450r :
dart450r joined the channel.
[2024-02-12 20:44:58]
lining-preps.0u :
lining-preps.0u joined the channel.
[2024-03-10 18:55:13]
dereksynkopa :
I'm trying to decrypt a flyrecord e.g. FLY062.dat (mini 2) using decrypt_mini_ftp_encryption.py but I get the message: IndexError: list index out of range. Where am I making a mistake? Can anyone help?
[2024-03-10 19:16:02]
jcase :
link me to that script
[2024-03-10 19:50:51]
dereksynkopa :
I don't understand how you want to link to the script?
[2024-03-11 00:30:18]
beavmon :
beavmon joined the channel.
[2024-03-28 02:01:50]
johnnokomis :
johnnokomis joined the channel.
[2024-04-13 17:57:07]
the_mini2_guy :
the_mini2_guy joined the channel.
[2024-04-25 23:55:12]
tylerwantsauav :
tylerwantsauav joined the channel.
[2024-05-08 02:58:54]
young :
young joined the channel.
[2024-05-10 08:21:12]
dreamtree :
dreamtree joined the channel.
[2024-05-21 07:01:30]
wag-on :
wag-on joined the channel.
[2024-05-22 01:28:30]
caracara :
caracara joined the channel.
[2024-06-03 07:35:49]
mymail :
mymail joined the channel.
[2024-06-10 21:38:54]
santosg :
santosg joined the channel.
[2024-06-15 06:31:44]
techcyn :
techcyn joined the channel.
[2024-06-26 23:31:35]
johnibhramin :
johnibhramin joined the channel.
[2024-07-01 17:30:10]
mrsmith :
mrsmith joined the channel.
[2024-07-17 03:02:42]
propz :
propz joined the channel.
[2024-07-26 15:53:39]
ogini_ayotanom :
ogini_ayotanom joined the channel.
[2024-07-26 16:04:23]
theguac :
theguac joined the channel.
[2024-08-03 07:49:56]
vicgoncharenko :
vicgoncharenko joined the channel.
[2024-09-01 06:52:11]
tacioli.master :
tacioli.master joined the channel.
[2024-09-09 14:11:28]
ar2rgo :
ar2rgo joined the channel.
[2024-09-10 21:45:44]
bulcaano :
bulcaano joined the channel.
[2024-09-22 18:12:45]
mangobot :
mangobot joined the channel.
[2024-09-27 04:43:53]
acebet :
acebet joined the channel.
[2024-09-27 10:52:47]
acebet :
Is there a way to downgrade from firmware version v01.00.0600? Or does anyone has experience if dronehacks will support (NFZ, altitude, FCChack) with the current version v01.00.0600?
[2024-10-29 00:37:59]
ololosha :
ololosha joined the channel.
[2024-11-08 22:35:23]
alt.nq-5711k93 :
alt.nq-5711k93 joined the channel.
[2024-11-26 17:00:37]
ox3d :
ox3d joined the channel.
[2025-01-17 18:48:47]
sachimic :
sachimic joined the channel.
×
User Info
Username:
Last Login:
First Name:
Last Name: