Channel Messages

[2020-06-04 15:31:16] d95gas : @d95gas has joined the channel

[2020-06-04 15:33:17] flymymavic : @flymymavic has joined the channel

[2020-06-04 15:34:28] flymymavic : Cant get to the bottom of the program on my laptop its set to 1920x1080,

[2020-06-04 15:34:50] heresmydron : @heresmydron has joined the channel

[2020-06-04 15:36:25] d95gas : Same with mine, and again I am Full HD. Wanted to have a look at the application, but last 25% missing.

[2020-06-04 15:39:52] ttqyswne : Thanks guys, thats 3 reports of that now. We will take a look and see what we can do. Developing on large screens does have its advantages, but its meant we missed this issue.

[2020-06-04 15:41:34] poopnondji : @vdub804 has joined the channel

[2020-06-04 15:42:46] flymymavic : @ttqyswne ive emailed this in to your support email mate

[2020-06-04 15:43:12] ttqyswne : Thankyou

[2020-06-04 15:45:05] ttqyswne : As a temporary measure, you can increase your resolution, or reduce your scaling in windows. Im also 1920/1080 on this screen, but scaling it set to 100% as its not a 4k screen or anything. But we will address the issue :slightly_smiling_face:

[2020-06-04 15:50:44] timlewis40 : @timlewis40 has joined the channel

[2020-06-04 15:51:55] cs : @cs has joined the channel

[2020-06-04 15:55:09] flymymavic : @ttqyswne yeah changing scaling works, i was at 125% changed it to 100%, but I hate that everything else is so tiny lol

[2020-06-04 15:59:02] d95gas : I am already at 100% and still the bottom part is missing

[2020-06-04 15:59:53] oakley75 : @reoak has joined the channel

[2020-06-04 16:00:33] dexlarpsn : @dexlarpsn has joined the channel

[2020-06-04 16:01:15] bin4ry : @bin4ry has joined the channel

[2020-06-04 16:06:39] wj7106 : @wj7106 has joined the channel

[2020-06-04 16:10:26] dkovar : @dkovar has joined the channel

[2020-06-04 16:11:30] markeviciusmodestas : @markeviciusmodestas has joined the channel

[2020-06-04 16:12:06] digdat0 : @digdat0 has joined the channel

[2020-06-04 16:12:52] pingspike : @rich has joined the channel

[2020-06-04 16:13:27] pingspike : `/pulls up a chair`

[2020-06-04 16:14:15] digdat0 : i had to use the video card's setting to add virtual resolution to my screen and go up to like 2400x1400. Devs must have a huge monitor! app looks nice, i like the advanced parms editor

[2020-06-04 16:15:16] originaldobo007 : @originaldobo007 has joined the channel

[2020-06-04 16:28:31] fredmicrowave : @fredmicrowave has joined the channel

[2020-06-04 16:33:29] rickw001 : @rickw001 has joined the channel

[2020-06-04 17:05:42] trulala69 : What tools are needed additionally to start the Mac Version?

[2020-06-04 17:11:09] flymymavic : just wanted to change the speed but its to windy to fly

[2020-06-04 17:17:19] quad808 : Who are these guys and why are they here?

[2020-06-04 17:17:27] quad808 : Anyone tried the app yet?

[2020-06-04 17:17:45] flymymavic : yep had a look mate

[2020-06-04 17:18:04] quad808 : PM me if you want

[2020-06-04 17:18:34] quad808 : I don't like talking crap about anything, except DJI...LOL

[2020-06-04 17:24:15] poopnondji : @quad808 I've used the linux version of the app, and it works. successfully downgraded Mavic mini from .400 to .200. editing params works also.

[2020-06-04 17:27:01] quad808 : wow. Does it seem legit? I have only looked at the website so far....

[2020-06-04 17:29:40] poopnondji : seems so from what I used it for.

[2020-06-04 17:29:47] quad808 : Oh, I see, may be someone in here, ok

[2020-06-04 17:31:49] cs2000 : Picked up a key earlier, it seems to work as advertised so far

[2020-06-04 17:36:32] cs2000 : To be fair to them, their custom fly controller is brilliant. I’ve finally upgraded from 03.0700 on my MP1 to 04.0500. Kept all the benefits of NFZ and Alt removal, but can finally use Active Track again. Just so you know, i purchased a license out of sheer curiosity. It’s not everyday this kinda thing happens. I’m sure a very similar thing will arrive in NLD too of course.

[2020-06-04 18:50:43] markeviciusmodestas : Did my test flight with BoostMode on and off. I will attach flight logs when I return home, but overall, not impressed at all. Barely added any range. It did go further, but like 150m more.

[2020-06-04 18:50:56] markeviciusmodestas : I'd even consider it within margin of error

[2020-06-04 18:54:40] pingspike : @markeviciusmodestas I've got one of these - might test it: <https://www.hobbyrc.co.uk/immersionrc-rf-power-meter-v2>

[2020-06-05 08:10:04] ttqyswne : @trulala69 The mac version didnt quite behave as expected so it was pulled for now whilst we figure it out, but dont worry, it will be back.

[2020-06-05 08:12:58] trulala69 : No worries, I took the Win version in a VM to succesfully test your tool. The free functions were working as expected, very nice and thank you for offering them BTW...

[2020-06-05 08:38:45] info020 : you are welcome :slightly_smiling_face: i hope we get the mac version up and running very soon!!

[2020-06-05 13:35:06] xela75 : do you plan to support industrial drone like M210 V2 for instance ?

[2020-06-05 14:00:25] digdat0 : I think the m210v2 has different encryption keys which have not been found yet.

[2020-06-05 15:13:42] digdat0 : thank you guys for allowing resizing of the window in the last update

[2020-06-05 15:39:11] ttqyswne : Latest update fixes the screen/display scaling, resizing the window is now possible. Plus a few other smaller bugs fixed :slightly_smiling_face:

[2020-06-05 15:39:46] ttqyswne : Theirs no forced auto-update, but in this case, we 100% recommend going to get the latest version! <http://drone-hacks.com/download>

[2020-06-05 15:51:37] d95gas : :+1:

[2020-06-06 06:40:00] bin4ry : uncovering something now, i wanted to get a unbiased response so i stayed hidden at the beginning: dronehacks is from me :wink: overall good first impressions, thank you for that. we will work on the app and hacks continuously.

[2020-06-06 07:12:00] d95gas : My bit of detective work was pointing at your good self Bin4ry ...... I asked Quad808 the other night..... His response was "I 'aint saying shit" :slightly_smiling_face: The Germany thing did it for me. Great work and glad to see you active and back again :+1:

[2020-06-06 12:32:15] oakley75 : Super awesome job @bin4ry, thank you. Glad to hear it's from an OG :grinning: May i suggest release notes for the program updates?

[2020-06-06 12:34:08] bin4ry : thank you! i wrote releasenotes already but they are just not shown at the homepage yet! will do that soon :slightly_smiling_face:

[2020-06-06 12:39:32] poopnondji : I was right all along lol

[2020-06-06 12:41:17] poopnondji : Good software good pricing except for adb shell :stuck_out_tongue_winking_eye:

[2020-06-06 12:43:30] ttqyswne : @vdub804 whats up with the ADB shell?

[2020-06-06 12:44:16] poopnondji : Poking fun at price for adb that’s all

[2020-06-06 12:48:43] ttqyswne : Its not really intended for general people to use. One wrong character and Poof, your drone is dead. It had to be expensive enough to stop people using it and breaking their drone then blaming us. People that really need it will buy it, especially on drones where we have private exploits for root access (MP2 for example) its very valuable.

[2020-06-06 12:53:56] poopnondji : Ahh that makes total sense. Anyways I’m rocking witcha. Love the software I’ve been tweaking my mini like a madman since release.

[2020-06-06 16:05:01] flymymavic : Guys, 1.04 just released is being seen as a virus in windows 10

[2020-06-06 16:12:53] dexlarpsn : @ttqyswne Which "private" exploits are there on MP2 then?

[2020-06-06 16:15:50] d95gas : @flymymavic I have just ran it on W10 and no issues, think you are probably getting a false positive due to the nature of what the application is and does

[2020-06-06 16:16:08] flymymavic : 1.03 didnt flag

[2020-06-06 16:16:26] flymymavic : none of the other versions either

[2020-06-06 16:16:28] flymymavic : strange

[2020-06-06 16:18:42] flymymavic :

[2020-06-06 16:19:00] loaderbull : yes i got the same on Win 10 ver2004

[2020-06-06 16:19:05] flymymavic : ive set it to allow as i trust the guys

[2020-06-06 16:19:26] loaderbull : the others were also flagged, but this was deleted

[2020-06-06 16:19:34] flymymavic : yeah same here

[2020-06-06 16:19:44] loaderbull : after allowing, i just re-run the DL and it's ok

[2020-06-06 16:20:11] flymymavic : im on build 1909 think its time to upgrade ?

[2020-06-06 16:20:43] loaderbull : Haven't noticed any issues, but once again MS have blocked it on some PCs!

[2020-06-06 16:21:38] flymymavic : brb gonna upgrade my windows

[2020-06-06 16:23:50] loaderbull : ok bud

[2020-06-06 18:09:42] bin4ry : yeah, the software includes exploits (hacks) and executes them. basically that part is correct, but it is no trojan. :joy: false positive, not unusual for that kind of software

[2020-06-06 19:48:20] loaderbull : @bin4ry how long does Boost take to load on M2? Been going for 5mins now bud?

[2020-06-06 19:59:38] bin4ry : should not take more than a minute

[2020-06-06 20:00:01] bin4ry : if it takes longer somthing went wrong with the connection.

[2020-06-06 20:00:41] loaderbull : Yeh FCC nor Boost mode work. Just a successful Stock Mode. Asked me to restart drone to take effect

[2020-06-06 20:00:53] bin4ry : ok

[2020-06-06 20:01:01] bin4ry : hmmm some people seem to are stuck there

[2020-06-06 20:01:03] bin4ry : sorry for that

[2020-06-06 20:01:07] bin4ry : will investigate it ! !

[2020-06-06 20:01:13] loaderbull : Ok thanks

[2020-06-06 20:01:25] bin4ry : you can send me your log file then i will look tomorrow

[2020-06-06 20:01:33] bin4ry : C:\Users\<USERNAME>\.dronehacks

[2020-06-06 20:01:40] bin4ry : files are date and time in the name

[2020-06-06 20:01:48] loaderbull : Ok will do

[2020-06-06 20:12:01] loaderbull : DM'd log to you

[2020-06-06 20:14:52] bin4ry : got it thx

[2020-06-06 20:22:39] loaderbull : Looks like it doesn’t actually set it to stock either looking at the Transmission Settings line in the Go 4 app..still looks to be in FCC mode as 1km line is between 80 and 90dbm

[2020-06-07 00:26:48] david218 : Is it possible to adjust the speed of tripod mode on the MA2?

[2020-06-07 03:15:21] david218 : So minor feedback: the color scheme on <https://drone-hacks.com/birdmap> is confusing. I thought the green background meant free features, and the red background meant paid features. :sweat_smile:

[2020-06-07 10:01:04] flymymavic : @david218 yeah they are adding a legend to the birdmap but the green and red is mentioned in the blog post

[2020-06-07 10:24:47] d95gas : I have always associated Green with Good/Go/Fill ya boots. And Red to danger/no/F**k off quick :grinning: Stems back to military days!!

[2020-06-07 12:14:51] david218 : Red means sensitive information! Restricted yes, but the information still exists. :joy:

[2020-06-07 12:55:17] rickw001 : how much is it in US dollars? lol

[2020-06-07 13:02:41] rickw001 : got it,$44.33

[2020-06-07 13:34:27] rames.d : NFZ removal for mavic mini works?

[2020-06-07 13:37:05] bin4ry : dronemap says red --> no

[2020-06-07 13:38:12] rames.d : I’m confused with red color - i think that will be better to remove red elements

[2020-06-07 13:38:43] rames.d : What main difference from NLD software? This is just newer version of it?

[2020-06-07 13:41:11] bin4ry : different author different software, for example DH can do latest versions of drone mp1, p4pv2 etc the customFC. which noone can, neither NLD nor Superpatcher. also i work on this software. i will amke sure to add an legend to it or to remove the colors and only show available hacks on this bird

[2020-06-07 13:41:24] bin4ry : it thoguh red and green are intuitive, but many people asked

[2020-06-07 14:11:03] david218 : Is there any case when you’d want to use both DH and NLD? At first glance it looks like there’s no non-overlapping features (if that makes sense).

[2020-06-07 14:33:56] dexlarpsn : Yeah @david218 CustomFC for example

[2020-06-07 14:36:23] david218 : But doesn’t DH’s CustomFC provide everything that NLD offers?

[2020-06-07 14:41:26] cadbob : I re-flashed back to stock using Fly App but still getting attached message which is a pain in the A$$

[2020-06-07 14:43:38] loaderbull : Maybe flash it using DH back to stock FCC?

[2020-06-07 14:45:06] loaderbull : I noticed even flashing my NLD mod back to stock kept settinga

[2020-06-07 14:48:37] cadbob : Got It! I had to Re-Link RC to Bird

[2020-06-07 14:49:03] cadbob : figured since AC knew where it was and RC didnt

[2020-06-07 14:49:58] cadbob : So for those having issue turn on controller with AC Off go to settings and re-link following instructions. You can also do it with Buttons both off to start. Then Press and hold Power Button on RC for 4 seconds and than press and hold AC power button for 4 sec. Profit! :slightly_smiling_face:

[2020-06-07 15:02:56] cadbob : But i'm wondering if we use boost mode and we are getting warning message and re-link rc to ac to remove the screen shot I posted, does boost mode still work or because in boost mode that means you have to live with message and not re-link as you dont want RC knowing where your at?

[2020-06-07 15:04:32] loaderbull : That relinks RC does it?

[2020-06-07 15:04:47] cadbob : yes

[2020-06-07 15:05:31] loaderbull : So both off. Power on RC for 4 secs by holding power button. Then the AC for 4 secs

[2020-06-07 15:06:04] cadbob : yes, but i did it the software way let me send you link with pics

[2020-06-07 15:06:23] cadbob : <https://www.heliguy.com/blog/dji-mavic-mini-drone-how-to-link-to-the-remote-controller/>

[2020-06-07 15:08:26] cadbob : Please let us all know how it worked for you

[2020-06-07 15:29:47] loaderbull : is that only for MM though?

[2020-06-07 15:31:32] bin4ry : boost mode is on rc

[2020-06-07 15:31:43] bin4ry : you need to remove it with dh (set back to stock)

[2020-06-07 15:32:04] bin4ry : the warning message mean that the drone was in another mode as the rc (and rc stays in boost mode)

[2020-06-07 15:33:19] bin4ry : nope, we can do customFC on the latest firmware’s. no one else can do that, also nld cannot do customFC at all currently

[2020-06-07 15:38:09] bin4ry : and that message actually means that the hack worked

[2020-06-07 15:38:11] bin4ry : lol

[2020-06-07 15:38:20] bin4ry : so the pita is good :wink:

[2020-06-07 15:42:08] cadbob : Yes Bin4ry I went inand set back to stock and re-booted RC but still got message so when I re-linked message went away

[2020-06-07 15:43:57] cadbob : that is what I'm using so yes, it did not work for you? Now if your using boost mode that message means your good to go no issue on your drone

[2020-06-07 15:44:03] bin4ry : also possible :wink:

[2020-06-07 15:45:36] cadbob : curious thou lets say someone is using Boost and of course that message means boost is working, what if they re-link controller does it remove boost or maybe message will never go away if they dont click back to stock with drone hacks

[2020-06-07 15:46:54] cadbob : I dont want to keep testing as my activation could expire at anytime LMAO

[2020-06-07 21:28:38] oakley75 : Once we activate a purchased license, can we stay offline with the app from then on? Obviously having the firmwares local already

[2020-06-08 07:58:09] ttqyswne : @reoak each time you start the app, it needs to check if you're licensed and all exploits are delivered from our servers, so you need to be online really.

[2020-06-08 09:26:31] oakley75 : Oh. Okay thanks for answering

[2020-06-08 12:33:36] david218 : Could you redirect HTTP to HTTPS please? Just irks me. :sweat_smile:

[2020-06-08 12:34:19] rickw001 : does this give you extra satellites,gloness,galileo ?

[2020-06-08 12:50:39] bin4ry : haha ok

[2020-06-08 12:51:55] bin4ry : depends on the latest firmware CURRENTLY not. i was happy enough to get it working on it. but i want to add it in the future if the people want it.

[2020-06-08 13:08:22] rickw001 : thank you,that's why I run SP,I'm a dummy with computers and they make it soo much easier,I have 2 keys from NLD,but a deal breaker without all options available for mavic pro

[2020-06-08 13:28:24] bin4ry : done :wink:

[2020-06-08 13:29:50] bin4ry : i see. for now i went with a standard set of patches for the latest mp1 firmware. more sattelites require much more work, that is why i postponed it until the reueqsts come :smile: ^^ request 1 noted :slightly_smiling_face:

[2020-06-08 13:33:44] rickw001 : thank you very much,I couldn't do it with NLD because I'm too stupid with computers,even though they offered it,it was too hard to do.It's automatic with SP,but with that said I'm still very interested :grinning:

[2020-06-08 14:37:26] bin4ry : i am honest i never tested the receiption is it really that much with galileo etc?

[2020-06-08 14:53:02] rickw001 : I jumped from 14 or 16 to 24 to 28 satellites

[2020-06-08 14:53:35] rickw001 : more is always better

[2020-06-08 14:55:08] bin4ry : ok :ok_hand: it is on todo! but no date :wink:

[2020-06-08 14:57:01] rickw001 : kk,thank you much,you can check with others but it does work better,they probably did it with scripts from NLD

[2020-06-08 15:00:28] bin4ry : nld does not support this

[2020-06-08 15:00:59] rickw001 : 1 more quick question,do you retain precision RTH? thanks again for all you do

[2020-06-08 15:01:38] rickw001 : it's not switchable,have to do it by script

[2020-06-08 15:02:26] rickw001 : with nld

[2020-06-08 15:15:31] bin4ry : sorry i am a bit lost. NLD does not do that i think, do you mean superpatcher? mavic 1 ? sorry i lost track now :smile:

[2020-06-08 15:15:52] bin4ry : because nld does not have customFC now, it is not yet released in NLD

[2020-06-08 15:15:59] bin4ry : customFC, it will come in the future to NLD but not now

[2020-06-08 16:15:33] rickw001 : sorry for delay,I if I remember properly they tell you how to modify go4 app to do this with their 4.22 app

[2020-06-08 16:20:35] bin4ry : but that does not allow customFC, only offlinemode etc. it is same go app from my repository on github, only NLD label :slightly_smiling_face:

[2020-06-08 17:38:35] trulala69 : I've downgraded now to .300 with .500 camera module, which keeps all parameters changeable and is up to date with the camera. DJ Fly reported .500 as current FW. Small feedback, nothing serious: I had to restart the DH Tool (1.04) after downgrading, as it loaded the modded .500 FW, but didn't react on "Flash FW" ... other than this MM is still happy... so THANKS again, this was a good day as I learned something new! Short question: why do you recommend .400 in the toolkit and not .300, which has more parameters to change?

[2020-06-08 17:50:58] bin4ry : maybe it was my mistake i thought they removed the parameters in 500 and 400 sag the version which allowed the most changes

[2020-06-08 17:51:13] bin4ry : i will change the recommended firmware to 300 tomorrow

[2020-06-08 18:09:28] rickw001 : yep

[2020-06-08 18:48:27] markeviciusmodestas : Can you share the packaged firmware?

[2020-06-08 19:05:38] dexlarpsn : @bin4ry Any chance you have height limit remove on Mavic Pro? Don't see it on any of the drones though

[2020-06-08 19:08:26] oakley75 : Who woulda figured the classics still work?!! Such an awesome discovery @trulala69

[2020-06-08 19:11:18] trulala69 : Well, yes, but to be fair, it wasn’t me who found this it was Poopdji who discovered this morning.

[2020-06-08 19:19:07] trulala69 : Theresia nothing to share really only the knowledge of howto do it, I’m afraid. All firmwares can be downloaded using the link in the DH Tool ... The process is simple: downgrade to .300 . Then open a copy of .500 fw as a tarfile in 7zip, delete all modules except 0100 and keep the cfg.sig file as well. Close 7zip, rename to .bin and flash it over .300. It’s all described in [https://dji.retroroms.info/howto/modulemix](https://dji.retroroms.info/howto/modulemix) ... and use a full battery as the flashing takes a while...

[2020-06-08 19:28:22] digdat0 : on the newer firmware, height removal is part of the customFC. If older, you need to edit the parameter in advanced parameters I think.

[2020-06-08 19:44:12] oakley75 : You right my bad, poopnondji was the one :+1:

[2020-06-08 19:47:54] amanita : Good work with the Drone Hacks @bin4ry i wish the best! I tried it and it's working fine! Maybe someone can help me with an issue I have with mavic 2 pro. When I fly with the double battery (the extra weight is 360g) and i am in 5-6ms for gain altitude , after 30-40 meters of height the drone start landing. I can cancel it and move on but after a while same thing happens. When i use 4ms to climb everything is fine. I also noticed that this happens when motor rpm reaches 700rpm. This happens only when i try to get high not when i fly straight. Maybe there's some parameter I can change? Thanks in advance!

[2020-06-08 20:08:26] heresmydron : any reason you want .500's camera firmware? whats special about it? or are yuou just giving a try to module mix?

[2020-06-08 21:03:59] amanita : @originaldobo007 thanks! Mavic pro at 4000m. Above a storm!

[2020-06-08 21:04:43] originaldobo007 : Fucking beautiful.

[2020-06-09 04:31:19] bin4ry : Hmmm, i am not sure to be honest, but that sounds like a sensor issue. Could be that the landing sensors are triggered?

[2020-06-09 07:13:45] amanita : I am not getting any error messages, everything is right in flightlog file. I will disable the sensors and try again.

[2020-06-09 07:44:46] markeviciusmodestas : Manual exposure I suppose

[2020-06-09 08:08:39] bin4ry : very very strange, this was also only a assumption

[2020-06-09 08:14:38] trulala69 : Yep, manual exposure ... and learning something new. Today I'm going to try .300 and ontop .500 without AC FC module 0306. The theory of this modular architecture is, each module is upgraded except the FC, which leaves the possibility to tweak all parameters, but updates everything else. The experimental part is, if the modules are still able to work together and we've nearly no problems due to module dependencies ...

[2020-06-09 10:06:58] amanita : Hi @bin4ry thanks for your interest! I think I found something strange. I use Master Airscrew props, I changed them today with original dji props and I went straight up το 300m with 6ms without landing kicks in. I changed back to Master Airscrew and after 60-70m up landing kicks in again. I also had vision system turned off. And because I use double battery i have change parameters to non dji battery.:thinking_face:

[2020-06-09 10:10:00] bin4ry : hmm, that is indeed strange but i am glad you found a initial point to investigate

[2020-06-09 12:05:15] flymymavic : Dam I just did the video on flashing as well

[2020-06-09 12:19:13] bin4ry : Awesome! Cannot wait to see it :slightly_smiling_face:

[2020-06-09 13:06:05] bin4ry : version 1.05 is released changelog is on the download site :grinning:

[2020-06-09 13:17:18] rickw001 : thank you:grinning:

[2020-06-09 15:50:33] david218 : @bin4ry might be worth it to invest the ~$80/year to get a code signing cert for Windows? :slightly_smiling_face:

[2020-06-09 15:51:07] bin4ry : where is it for $80? i never looked into windows code signing tbh

[2020-06-09 15:51:12] bin4ry : any recommendation?

[2020-06-09 15:51:20] loaderbull : Have a P4 Pro+ V2 on the way tomorrow :slightly_smiling_face:

[2020-06-09 15:51:30] bin4ry : @loaderpoo wohoo

[2020-06-09 15:51:44] loaderbull : Be buying a key off you @bin4ry

[2020-06-09 15:51:57] loaderbull : :wink:

[2020-06-09 15:54:30] david218 : @bin4ry at first glance these guys seem to be the cheapest. <https://comodosslstore.com/code-signing>

[2020-06-09 15:54:54] david218 : as long as you can do a chargeback, I'd go for whoever is the cheapest Comodo reseller.

[2020-06-09 15:55:49] bin4ry : i will take a look soon, problably the best to do proper code signing

[2020-06-09 15:55:55] bin4ry : thank you for that link

[2020-06-09 15:56:39] david218 : I should get around to getting a cert for the lawls.

[2020-06-09 15:57:33] bin4ry : :wink:

[2020-06-09 15:57:40] bin4ry : did you start hacking by now?

[2020-06-09 15:57:54] bin4ry : or still reading up etc?

[2020-06-09 15:58:02] bin4ry : on drones i mean ofc :wink:

[2020-06-09 16:00:30] oakley75 : Love the checksum on download page, wish everyone else would be that smart lol. Thanks allot

[2020-06-09 16:00:58] david218 : a little. It's a weird frankenstein.

[2020-06-09 16:01:23] bin4ry : @reoak well ... a user asked, and i was .... **badumm** why didn't i think of it ^^

[2020-06-09 16:01:33] bin4ry : @david218 i see, if you need help hmu

[2020-06-09 16:09:03] david218 : this isn't a DJI specific question/comment, but have you looked into adb_shell? Looks handy to have a pure python implementation. <https://github.com/JeffLIrion/adb_shell>

[2020-06-09 16:10:35] bin4ry : i did, but all this implementation need a proper adb server running on the machine --> adb.exe on windows is still needed, adb binary on linux etc etc

[2020-06-09 16:11:19] bin4ry : i found this wrapper <https://github.com/sch3m4/pyadb> and a proper check for the current platform tools is a better way of handling things

[2020-06-09 22:10:35] heresmydron : mini's tx power: Normal mode ```/ # iwlist ath0 txpower ath0 8 available transmit-powers : 0 dBm (1 mW) 2 dBm (1 mW) 3 dBm (1 mW) 4 dBm (2 mW) 5 dBm (3 mW) 6 dBm (3 mW) 7 dBm (5 mW) 8 dBm (6 mW) Current Tx-Power:8 dBm (6 mW)``` DH's Powermode ```/ # iwlist ath0 txpower ath0 8 available transmit-powers : 0 dBm (1 mW) 2 dBm (1 mW) 4 dBm (2 mW) 6 dBm (3 mW) 8 dBm (6 mW) 10 dBm (10 mW) 12 dBm (15 mW) 14 dBm (25 mW) Current Tx-Power:14 dBm (25 mW) / # iwlist ath0 txpower ath0 8 available transmit-powers : 0 dBm (1 mW) 6 dBm (3 mW) 7 dBm (5 mW) 8 dBm (6 mW) 9 dBm (7 mW) 10 dBm (10 mW) 11 dBm (12 mW) 12 dBm (15 mW) Current Tx-Power:12 dBm (15 mW)``` (switches between those two)

[2020-06-09 22:10:41] heresmydron : all of this while connected to the AC

[2020-06-10 00:17:40] poopnondji : Nice! V.05 added RC flashing.

[2020-06-10 04:35:43] bin4ry : @heresmydron :wink: actually it switches chanel’s if you see the tax power jumping. the highest tx power is on the lowest 2.4G channel iirc

[2020-06-10 08:00:51] heresmydron : interesting, it was on manual lowest channel on 5.8, ill tryit again on 2.4

[2020-06-10 08:01:09] heresmydron : funny thing is that you cant have the eth to usb adapter and the phone connected at the same time on the RC

[2020-06-10 08:01:47] heresmydron : i tried with an usb hub and it does recognize the usb to eth adapter, but it refuses to cooperate with the phone

[2020-06-10 08:50:14] bin4ry : that is because the USB needs the OTG support to give you the shell

[2020-06-10 10:14:31] heresmydron : yeah yeah i was able to shell it with RC > USB OTG > USB HUB > USB to ETH adapter

[2020-06-10 10:14:47] heresmydron : but plugging the phone to the hub did nothing, not even charge it

[2020-06-10 10:33:14] trulala69 : Looking at the numbers DH Boost raises TX power on a CE RC from 8 to 12dbm? It would be really cool to have this on the AC as well ...

[2020-06-10 12:25:35] bin4ry : actually DH boost raises the TX power from 8mW to 31 mW in the maximum on CE units (31mW is reached on the lowest channel of 2.4G). the FCC mode there might have confused you, the RC does not have a real FCC mode, as the hardware is missing, you can "force" it to behave like a fcc RC but then you loose 2.4G band :wink: so maybe @heresmydron can remove the fcc part of the table for the sake on less confusion

[2020-06-10 12:28:36] bin4ry : and the powermode propagates to the drone it is just not persistent on the drone. the drone will tell you that it needs toreboot to reflect the new settings everytime you restart the drone :slightly_smiling_face: that is because it switches to the same mode as the RC

[2020-06-10 12:32:36] trulala69 : Ok, now you‘ve sold another license, I was about to get one anyway to support your great work!

[2020-06-10 13:52:01] heresmydron : FCC section gone

[2020-06-10 16:20:31] d95gas : @bin4ry thanks for the clarification :+1: and keep up the awesome work

[2020-06-10 18:41:25] pingspike : couple of questions guys, "Introduction price 14 days only" - what actual date will that be? (nobody seems to know when the timer started)

[2020-06-10 18:41:36] pingspike : and what price will it go up to after that date?

[2020-06-10 18:50:04] d95gas : Would that have been Go Live date which I think was 2nd or 3rd Jun?

[2020-06-11 07:57:29] pingspike : nobody seems to know :slightly_smiling_face:

[2020-06-11 07:58:44] ttqyswne : Morning all. Yes, the 14 days timer is from our launch date. When @bin4ry is back online, im sure he will clarify the actual end date for you all and what the final price will be :slightly_smiling_face:

[2020-06-11 08:00:56] ttqyswne : Some more updates today for you all. Credit/Debit Cards, AliPay, Apple & Google/Android Pay are now available payment options in the checkout process! WeChat pay is our next addition in the coming days :slightly_smiling_face: <https://drone-hacks.com/blog/post/71>

[2020-06-11 08:02:02] bin4ry : 19. is the end day

[2020-06-11 08:02:32] bin4ry : price :wink:

[2020-06-11 10:26:54] dexlarpsn : Where is the launch price? I dont see it anywhere

[2020-06-11 10:27:44] ttqyswne : €35.00 for the Regular license

[2020-06-11 10:27:59] dexlarpsn : Intruduction is 35€ but after that it will be 19? :joy:

[2020-06-11 10:28:06] dexlarpsn : Or did you make a mistake @bin4ry

[2020-06-11 10:28:13] loaderbull : 19th

[2020-06-11 10:28:20] loaderbull : The offer ends

[2020-06-11 10:28:30] dexlarpsn : Ahhhhh I get it now, I was confused

[2020-06-11 10:28:31] dexlarpsn : Thanks

[2020-06-11 15:22:32] pingspike : what will the price be going up to @bin4ry mate?

[2020-06-11 15:39:57] bin4ry : just wait mate :laughing:

[2020-06-11 15:41:48] digdat0 : <https://imgur.com/5vQiT4V>

[2020-06-11 15:42:33] david218 : I can confirm that the price will be numerical value over 35€.

[2020-06-11 15:43:59] david218 : _possibly_ a float, but that's 100% speculation.

[2020-06-11 15:45:24] pingspike : is it a secret?

[2020-06-11 15:55:01] digdat0 : if it were me, I'd wait until the other apps new version launches, compare features and base price against value of what the app has vs what the competitor has. The one thing which is undeiable though, is that DH allowing firmware and parameters on the free version is super nice. No more assistant 2

[2020-06-11 15:56:00] ttqyswne : Put it this way guys, this is an introductory offer, its only going to go up. If you wanted to use it, its worth picking up a license now. Why not save yourself some cash :slightly_smiling_face: But its your own money, spend it as you will :slightly_smiling_face:

[2020-06-11 16:05:30] pingspike : just trying to gauge the cost/benefits of each

[2020-06-11 16:06:35] pingspike : still unsure why the price it will go up to remains unknown :thinking_face:

[2020-06-11 16:07:16] pingspike : `/sets calendar reminder for 19th`

[2020-06-11 17:40:01] rickw001 : I sure wouldn't wait for new NLD update to decide,that could take forever,lol

[2020-06-11 18:50:37] loaderbull : @bin4ry Mavic Mini & P4 Pro V2 license activated :slightly_smiling_face: thanks bud

[2020-06-12 01:25:41] cadbob : Bin4ry or DHSteve, Can I Purchase at introductory price and not activate for a bit, I'm buying for my P4 not mini. In other words once purchased do we have to activate that same day?

[2020-06-12 05:50:56] bin4ry : you can activate whenever you want no need to rush for activation

[2020-06-13 00:19:41] sdcoughlan : is it possible to use 5.8G by default on Mavic 2 ? have lite license

[2020-06-13 03:16:44] monkeyman : how can I get to this crazy powermode? :D

[2020-06-13 03:36:23] monkeyman : is dh work for mavic enterprise dual?

[2020-06-13 04:30:59] bin4ry : @dijkstra_simon such things are not possible at all sorry @akbardotinfo not yet, enterprise support will come soon. what features do you need? m2 enterprise will get fcc and boost only

[2020-06-13 05:11:00] monkeyman : Yes, the boost is what we need:+1:

[2020-06-13 05:12:06] monkeyman : Boost and no nfz, sometime we doing inspection on the airport with legal state permission

[2020-06-13 05:51:35] bin4ry : m2enterprise is very similar to m2, nfz removal is not possible on newer firmware versions than the release version, and downgrading is also blocked by dji. so m2e would also same as m2 only be able to boost the signal and NOT be able to remove NFZ currently.

[2020-06-13 05:51:53] bin4ry : but first i would need to add it and test it, it won't come in the next days

[2020-06-13 09:26:35] dronepilot : @bin4ry if i have upgrade a M2 from.100 up to .510 using DH, can i still downgrade do .100 from .510?

[2020-06-13 10:26:19] dexlarpsn : Does the Mavic Pro on latest FW has alititude removal?

[2020-06-13 10:30:44] dexlarpsn : also @bin4ry if we purchase the cheaper M2 license, but there will be more mods in the future for M2, does that include it for that license, or do we need a regular then?

[2020-06-13 10:53:47] heresmydron : [drone-hacks.com/](http://drone-hacks.com/)

[2020-06-13 11:19:01] cadbob : bin4ry curious on P4 FW .700 what is the Flight Controller Flash do?

[2020-06-13 11:19:14] bin4ry : no

[2020-06-13 11:19:22] bin4ry : yes

[2020-06-13 11:19:36] bin4ry : it will be included then

[2020-06-13 11:23:39] bin4ry : alt nfz etc.

[2020-06-13 11:25:43] cadbob : doesnt .500 have altitude and NFZ without out FC? Did DJI newer FW move those setting to FC Area?

[2020-06-13 11:33:27] bin4ry : go try :wink:

[2020-06-13 11:52:53] rames.d : Mavic 2 510 fcc boost really supported?

[2020-06-13 11:53:02] rames.d : Or it is bug in site?

[2020-06-13 11:53:04] dexlarpsn : Still hoping for M2 NFZ support but I dont think it will be possible at all

[2020-06-13 11:53:34] cadbob : lol ok

[2020-06-13 12:12:18] bin4ry : no bug, it is really supported :blush:

[2020-06-13 12:12:26] bin4ry : :grin:

[2020-06-13 12:13:07] bin4ry : yah i will not promise anything since honesty is important for me. i am working on it for sure but that’s about it

[2020-06-13 12:18:36] cadbob : Bin4ry another question, I'm at present on my Hacked P4 FW v1.2.602 that I removed restrictions with debuging assistant. Course back than I have older FW on Remote, should I use DJI to update to latest and Greatest on AC and RC and than down grade to .700 with DH? I thought at one time DJI put anti roll back on P4 Firmwares?

[2020-06-13 12:20:10] bin4ry : why not use DH to update to 700 directly?

[2020-06-13 12:20:34] bin4ry : we will add 810 patched FC soon too for p4 std

[2020-06-13 12:20:40] bin4ry : currently working on it

[2020-06-13 12:20:49] cadbob : I want Newest RC firmware

[2020-06-13 12:20:53] bin4ry : will take a few days then it will be public

[2020-06-13 12:21:23] cadbob : ohhh so the FC Patch goes to RC???

[2020-06-13 12:21:28] bin4ry : update the rc without the ac then

[2020-06-13 12:21:39] bin4ry : no the fc patch will go to the ac

[2020-06-13 12:21:54] bin4ry : ac and rc firmware don’t have to be the same

[2020-06-13 12:21:57] cadbob : ahhh got yah I'm a dumb ass havent finished my espresso

[2020-06-13 12:22:01] bin4ry : lol

[2020-06-13 12:22:07] bin4ry : no worries

[2020-06-13 12:28:10] cadbob : I just started Assistant after who knows how long, it still in debug mode. lol

[2020-06-13 12:42:41] cadbob : How would I update RC to newest FW through DJI without doing AC Bin4ry. My thoughts were update RC through DJI and than use DH to Backup my current FW on AC and than use DH to update to .700

[2020-06-13 12:49:33] bin4ry : usually depending on the drone i either use the remote with dji go and not power on the ac or connect the rc to assistant via usb

[2020-06-13 12:53:35] cadbob : I'm looking for readme's on the RC firmwares but havent found any yet, I dont want to screw up the AC tweaks by adding a new RC Firmware Version

[2020-06-13 14:57:30] flymymavic : Won’t they normally appear in the guide on the DJI download page

[2020-06-13 15:44:52] cadbob : I didn't see it. I would like to backup and flash controller, not just flash it through GO4. I was also looking for a change Log for version 1.1.18 , .92 and latest .93 I'm on RC 1.1.18 and AC 1.2.602 DH gives me awesome ability to go to any AC Firmware, wish I could do that with RC.

[2020-06-13 17:59:03] dronepilot : I so the warning, just back up didn’t make the flash.

[2020-06-13 20:12:07] cadbob : Flashing my P4 from 1.02..602 to .0700 customFC taking some time thou

[2020-06-14 09:10:49] amanita : Hi @lowellfoo780 I believe the same. I can't understand why thats happens only with Master Airscrew props and not with the original props:thinking_face:

[2020-06-14 21:10:31] quad808 : MAS props put more load on the motors, since they are slightly more aggressive as compared to the stock props. Lower RPM on the motors, but more strain. Thats what I figure.

[2020-06-15 09:25:19] markusfriedl : @info020 do i need to create an account for each licence/drone or is will it be possible to administer mutliple licences/drones with one account?

[2020-06-15 09:43:28] bin4ry : it is already possible to administer multiple drones with one account only

[2020-06-15 09:43:39] bin4ry : you just need to use the same account during checkout on the website

[2020-06-15 12:04:04] buundy : Hello! When the mac version will be available?

[2020-06-15 12:23:46] buundy : still bought a regular license to test it on a MP

[2020-06-15 12:31:37] buundy : how much time should a customFC flashing take on a MP? It is running now for 10 minutes

[2020-06-15 12:31:42] buundy : or 15

[2020-06-15 12:32:13] bin4ry : the mac version is in development i can send you a pre.test version if you like

[2020-06-15 12:32:19] bin4ry : do you have all drivers installed ?

[2020-06-15 12:32:20] buundy : thanks, I can test it

[2020-06-15 12:32:27] bin4ry : because it should not take this long

[2020-06-15 12:32:35] buundy : yes, i was able to do a fw upgrade with the app

[2020-06-15 12:32:40] bin4ry : ?

[2020-06-15 12:32:41] buundy : should I reconnect?

[2020-06-15 12:32:48] bin4ry : ah

[2020-06-15 12:32:53] bin4ry : please look in windows device manager

[2020-06-15 12:33:02] bin4ry : do you see a device with an exlamation markß

[2020-06-15 12:33:03] bin4ry : ?

[2020-06-15 12:33:04] buundy : ok, just a moment

[2020-06-15 12:33:25] buundy : yeah, DJI device with ?

[2020-06-15 12:33:31] bin4ry : ah that is the problem

[2020-06-15 12:33:34] bin4ry : close DH

[2020-06-15 12:33:38] rickw001 : turn on ac and see if it connects,if it does it is done flashing

[2020-06-15 12:33:38] bin4ry : but do not disconnect the drone

[2020-06-15 12:33:44] bin4ry : nothing had happened yet

[2020-06-15 12:33:44] buundy : okay

[2020-06-15 12:34:02] rickw001 : sorry,rc

[2020-06-15 12:34:07] bin4ry :

[2020-06-15 12:34:17] bin4ry : after you closed DH please open this driver installer

[2020-06-15 12:34:26] bin4ry : click the "DJI" device and then click install

[2020-06-15 12:34:27] buundy : it is connected to the drone

[2020-06-15 12:34:43] bin4ry : after it is installed start DH again

[2020-06-15 12:34:56] bin4ry : and then run customFC again, it will work now

[2020-06-15 12:34:57] buundy : what should I see in the about section if customFC flashing is successful?

[2020-06-15 12:35:02] buundy : oh, I see

[2020-06-15 12:35:12] buundy : I try it now

[2020-06-15 12:35:24] bin4ry : please close DH before installing the driver

[2020-06-15 12:35:29] bin4ry : it has not started flashing no worry

[2020-06-15 12:35:35] bin4ry : it was not able to speak to the adb device

[2020-06-15 12:35:38] bin4ry : so nothing really happened

[2020-06-15 12:35:44] bin4ry : i guess this is windows 7 ?

[2020-06-15 12:35:54] buundy : yeah

[2020-06-15 12:35:58] buundy : old but gold :slightly_smiling_face:

[2020-06-15 12:36:03] bin4ry : yeah no so gold ^^

[2020-06-15 12:36:06] bin4ry : alsways causing problems

[2020-06-15 12:36:07] bin4ry : ^^

[2020-06-15 12:36:07] bin4ry : lol

[2020-06-15 12:36:23] bin4ry : i need to add a timeout

[2020-06-15 12:36:29] bin4ry : and link the driver in FAQ

[2020-06-15 12:36:32] rickw001 : always check to see if rc connects to ac after flash ,if it does flash is done,if not it failed

[2020-06-15 12:36:47] bin4ry : @rickw001 yes, but here the flash cannot start without ADB

[2020-06-15 12:36:52] buundy : I’M on a mac most if the time, so not so much time on Win

[2020-06-15 12:36:58] bin4ry : not worry

[2020-06-15 12:37:04] rickw001 : kk,sorry

[2020-06-15 12:37:12] bin4ry : nothing to be sorry, you are right !

[2020-06-15 12:37:13] bin4ry : :slightly_smiling_face:

[2020-06-15 12:38:14] rickw001 : :+1:

[2020-06-15 13:51:51] monkeyman : if you need access I can give you teamviewer to access the drone from the computer :)

[2020-06-15 15:10:58] david218 : @bin4ry would a VM work for @buundy?

[2020-06-15 15:12:25] bin4ry : @david218 we solved the problem in private messages. windows 7 has some adb driver problems for dji products as it seems.

[2020-06-15 15:12:35] bin4ry : i will put the driver package on the homepage soon

[2020-06-15 15:20:56] buundy : I can try the vm way also, i will report back my findings

[2020-06-15 19:08:21] originaldobo007 : 9

[2020-06-16 13:57:19] monkeyman : @bin4ry boost on mavic mini FCC hardware: how much the different?

[2020-06-16 14:03:56] bin4ry : @akbardotinfo please read the FAQ on the site regarding to that. it is very dependent on the enviroment. we did tests in europe and one staff member did tests in the US with his FCC model, all tests shows a signal improvement. However it really depends on your envirmorent. This still is ONLY a wifi drone. In general we get mixed results all between 0-500 meters improvement. (I personally actually got 0 meters in the middle of berlin in a very WIFI-crowded place, the drone would not fly more than 20 meters away at all, lol!)

[2020-06-16 14:05:25] monkeyman : got it @bin4ry thanks!

[2020-06-16 14:06:21] bin4ry : you are welcome!

[2020-06-16 14:07:20] loaderbull : Same, not a massive improvement on the Mini, wifi is no good in urban situations as @bin4ry has said. But any improvement is better than none.

[2020-06-16 14:52:01] bin4ry : new version, changelog on the site, mac support (BETA!!!! Please be patient with me ^^, if any problems please report them, i will try to fix it eventually)

[2020-06-16 14:56:23] hazardc : the problem with fcc mini is the narrow bandwidth in the 5ghz spectrum..... it's liked they used it just to get a pretty looking feed

[2020-06-16 14:57:05] hazardc : get the MA2 hacked and take my money plzthx

[2020-06-16 14:57:55] loaderbull : FCC Boost MA2 ftw @bin4ry :slightly_smiling_face:

[2020-06-16 14:59:27] bin4ry : first now this development did cost a much of time. will start exploiting with more time soon again :slightly_smiling_face: MA2 is here already

[2020-06-16 15:02:03] loaderbull : @bin4ry you’re doing a full-on great job. Another license key will be bought when you crack the Air 2 :+1:

[2020-06-16 15:02:53] bin4ry : :slightly_smiling_face:

[2020-06-16 15:28:33] hazardc : I'd buy two for the MA2 today lol

[2020-06-16 15:29:14] hazardc : especially if i didn't have to use dji fly anymore

[2020-06-16 15:40:57] bin4ry : MA2 update is risk-less the antirollbackvalue is the same as before, so you can always downgrade :slightly_smiling_face:

[2020-06-16 15:41:26] loaderbull : so ok to update right now?

[2020-06-16 15:41:46] loaderbull : to latest FW?

[2020-06-16 15:41:49] bin4ry : if you think it is important :stuck_out_tongue:

[2020-06-16 15:41:51] bin4ry : lol

[2020-06-16 15:41:51] bin4ry : i never update

[2020-06-16 15:41:57] loaderbull : not overly

[2020-06-16 15:46:35] hazardc : I do avoid updates a lot if it's stable... i was upgrading the crap out of the mini because it was having hte "Drop almost out of the sky" bug before i sent it back ... i kinda liked the thing but would have rather just had another spark variant, the 249g thing means nothing to me. i was never afraid of sparky flying away in wind or losing signal 50m out lol

[2020-06-16 16:03:07] loaderbull : Thing is with DJi and their initial FW is that the early ones tend to feel like a beta test. I have just upgraded. I hope that hasnt put me out of reach of FCC/Boost when it arrives. NFZ or Alt limits aren’t something i am personally bothered about. Signal quality is. I’m sure @bin4ry will put his mind to it when he has time. Look how quickly things are moving here! Love all this i do :slightly_smiling_face:

[2020-06-16 17:26:04] bin4ry : :stuck_out_tongue_winking_eye:

[2020-06-16 17:26:23] david218 : :open_mouth:

[2020-06-16 17:26:35] bin4ry : i mean my desk :laughing:

[2020-06-16 17:26:57] david218 : awww haha

[2020-06-17 07:56:04] bin4ry : i start feeling that hte MAC Os X version was not a good idea

[2020-06-17 07:58:13] bin4ry : the beta wors for some people without problems, but others have problems with "why can't i install the file" (i did not bundle an installer, because why should i?)" and similar problems. i am not sure if the audience for this sofware is a good match there .... :confused:

[2020-06-17 07:59:35] bin4ry : anyone here a mac poweruser willing to run some tests for me ?

[2020-06-17 08:00:24] bin4ry : i really want to help OS X users with a nice software, but i need some help myself with this OS, lol. in general i have more questions regarding my app and why it handles stuff different on different OS X versions ?!

[2020-06-17 09:13:15] buundy : I am here :wink:

[2020-06-17 09:13:40] buundy : been a mac user since 2007 I guess

[2020-06-17 09:31:03] bin4ry : yeah, this Mac platform drives me crazy, if we cannot solve the issues on mac i will remove mac support once and for all, sorry., but this OS seems totally inconsistent

[2020-06-17 09:42:52] trulala69 : Woah, I've just tried to test 1.06 Mac Version on Mojave ... App starts, ask for PW to change "things", which makes me always feel uncomfortable, and then my whole Desktop Session dies instantly and I'*m back to Mac's Login Screen ...

[2020-06-17 09:43:12] trulala69 : Or to say it in german: "KRASS"

[2020-06-17 09:44:06] ttqyswne : @trulala69 it needs the password to access the COM port. Yes, that issue seems to be affecting a few people, trying to find out why right now. The Mac version has moved to a private beta now

[2020-06-17 09:44:45] bin4ry : @trulala69: yeah sorry about that. The admin pwd is also needed to be able to write the "private" folder of DH on the temp location. Which OS X version are you running?

[2020-06-17 10:04:22] fstephan1 : Mac version realy not needed, insall BootCamp and use Windows. <https://www.maceinsteiger.de/how-to/windows-auf-dem-mac/>

[2020-06-17 10:06:32] trulala69 : Mojave = 10.14.6 ... Just wanted to give Feedback as I'm already a happy customer with DH running in a VM without issues ...

[2020-06-17 10:07:02] bin4ry : @trulala69 thanks for the info. i think everybody who had that issue was running mojave @buundy also

[2020-06-17 10:07:28] ttqyswne : So ive been testing in Mojave and also got that logout bug, just upgraded to Catalina and it now launches just fine, going to actually test using the app now.

[2020-06-17 10:07:43] trulala69 : No problem

[2020-06-17 10:08:19] trulala69 : But I won't upgrade to Catalina (probably ever) for DH :grin:

[2020-06-17 10:09:05] ttqyswne : Haha, no, upgrading isnt the fix! But im just saying if anyone didnt care if they upgraded or not, as i dont, it will at least let you use the software

[2020-06-17 10:17:31] dkovar : MAC versions are nice to have for some of us. I've always needed to run exploits as root to get access to the com ports.

[2020-06-17 10:18:21] bin4ry : @dkovar yeah, i see the "problem" of not having native mac support. that is why i try :slightly_smiling_face:

[2020-06-17 10:28:24] ttqyswne : Also, future Mac's are going back to custom CPU's, killing bootcamp, at least in its current form

[2020-06-17 10:49:27] dkovar : And bootcamp isn't for everyone - it takes up disk space, for one.....

[2020-06-17 11:00:05] fstephan1 : You can install bootcamp on the mac and uninstall it without leaving any traces, the Windows partition is created automatically and also removed. Windows can be used free of charge when deactivated.

[2020-06-17 12:23:57] bin4ry : i think it is a mac OS version issue, i had another user running the software without "big" issues

[2020-06-17 14:40:54] david218 : Bootcamp is a huge pain for those of us with small Apple SSDs.

[2020-06-18 02:45:58] hazardc : Apple had a good few year run of innovation, then steve jobs died, then they ran on those fumes for a few years, now the fumes are getting less pleasant to breathe.

[2020-06-18 07:33:34] loaderbull : @bin4ry if i get the DJi Smart Controller will that affect DH at all? How does the FCC Boost work is it drone side and then the controller switches to FCC or is it purely drone OR controller? Not sure if they both switch and then the drone also has that extra power boost etc?

[2020-06-18 07:42:31] bin4ry : the powermode does propagate to the controller, but the smartcontroller is very limited, it cannot get as much power output as a normal controller. not worth buying

[2020-06-18 07:42:48] bin4ry : it has a hard cap of txpower

[2020-06-18 08:21:06] dexlarpsn : Does CE to FFC work then on Smart Controller?

[2020-06-18 08:21:15] dexlarpsn : Mavic 2 Pro

[2020-06-18 08:28:47] bin4ry : both boost an fcc work on smart controller, but boost is far less power than boost on the RC, but still more power than FCC

[2020-06-18 08:28:57] bin4ry : don't go for the smart controller

[2020-06-18 08:29:02] bin4ry : it is crap

[2020-06-18 08:29:09] bin4ry : for range

[2020-06-18 08:50:20] loaderbull : Problem i have is - i have the P4 Pro+ V2, with built in screen. Cant use third party apps like Litchi etc on that. Where on SC you can. Bit of a trade off i guess. That’s why i’m looking for a standard V2 remote :neutral_face:

[2020-06-18 16:14:42] oakley75 : Is today or tomorrow the last day for the license introductory price?

[2020-06-18 17:55:41] bin4ry : yes, and many requests reached us to keep the price tag of 35€ and not go higher

[2020-06-18 17:58:21] bin4ry : really much people want us to stay at 35€ so i will give it a nights sleep, but most likely we won't rise the price but make the 35€ permanent, so no need to rush!

[2020-06-18 18:44:54] david218 : @bin4ry how about giving us early adopters a free upgrade? :wink:

[2020-06-18 18:46:21] bin4ry : free upgrade to what @david218

[2020-06-18 18:46:28] bin4ry : ? :smile:

[2020-06-18 18:46:44] david218 : regular -> professional

[2020-06-18 18:48:54] bin4ry : nah that is too much sorry :slightly_smiling_face:

[2020-06-18 18:49:09] bin4ry : btw i thought you already had pro

[2020-06-18 18:50:04] david218 : I was gonna send you more money to change my license to pro, but then I found out I was misreading the birdmap lol

[2020-06-18 18:50:24] bin4ry : ah yes i remember

[2020-06-18 18:53:10] bin4ry : however, i will not lower the price, that would be unfair to early birds. and i think 35€ is a very fair price for good features. but i just decided against the price increase (i was planning to go to 40€) as many people wrote that we should please not do that.

[2020-06-18 21:36:31] oakley75 : Thanks for that @bin4ry. Being straight up, 35 is a proper price. Appreciate the hard work

[2020-06-19 09:47:40] fstephan1 : To create a way that experienced users can help inexperienced users, there is now a support forum. This should primarily serve the community. For example, there is the possibility to exchange parameter sets and tips. Here is the preliminary link in the area: <https://www.kopter-support.de/viewforum.php?f=100> A simple link from [drone-hacks.com](http://drone-hacks.com) in the forum will follow later. There is one area each in German and English.

[2020-06-19 10:50:16] amanita : Hi @fstephan1. I am trying to register and does not allow me, i get the message "The email address you entered is not allowed to be used". I am using my gmail.

[2020-06-19 20:40:30] heresmydron : Mini CE, 5.8ghz, DH boost enabled :smile:

[2020-06-19 23:14:03] poopnondji : Damn @heresmydron you and those cracked screens :rolling_on_the_floor_laughing:

[2020-06-20 00:20:44] monkeyman : its very very slow from your website to Indonesia (south east asia)

[2020-06-20 01:39:54] monkeyman : can it use paypal?

[2020-06-20 06:19:57] bin4ry : you can ofc use paypal just select it

[2020-06-20 06:20:33] bin4ry : about the speed, there is nothing i can do about it, what is your normal internet speed? i can down and upload to the server worth 30MB/s

[2020-06-20 06:21:25] bin4ry : but ofc this can change around the world depending on the routes

[2020-06-20 14:44:34] flymymavic : Has anyone else noticed that the max speed of the mini in P mode seems locked at 17mph, Ive used DH to alter the speed but it makes no difference. its like the Mavic Pro, max speed is locked due to the forward VPS, you can only get max speed by disabling VPS, but the mini doesnt have VPS so why can i not get the max speed in P mode to change

[2020-06-20 15:24:08] monkeyman : my internet speed is 100mbps, the route to dh is small maybe, but to others website, no problemo

[2020-06-20 16:50:06] originaldobo007 : I just want to (once again) publicly thank everyone involved on the Drone-Hacks team. Your work is helpful, you guys are stand-up people, and you are providing a new alternative and needed competition. There is room for all competitors. The interesting thing is that both NLD and DH have wonderful people working on the respective products. You deserve much respect, admiration, and plenty of money for your work. Cheers to the known and unknown people on these projects. You guys rock. :beers:

[2020-06-20 18:09:10] bin4ry : thank you :blush:

[2020-06-22 17:47:21] markeviciusmodestas : Anyone flashed Mavic Mini RC firmware?

[2020-06-22 17:47:38] markeviciusmodestas : \Mine seems to be stuck on Flashing 0000

[2020-06-23 04:45:07] bin4ry : 0000 is the cfg file. did you module mix your firmware by any chance? because this could happen then. Flashing mini RC and getting stuck usually is caused by data transfer problems. flashing firmware is nothing more as: Transfer data to device -> tell device data is there -> device takes teh data and starts flashing (and sends out it status) so 99% is due to a bad usb cable or some AV software to block some datatransfer and other issue could be if you module mix, and not package the firwmare correct (firmware NEEEDS to be tar NOT zip or similar)

[2020-06-23 13:39:46] rickw001 : any luck with glonas sats and precision landing,thanks for your work

[2020-06-23 13:45:28] bin4ry : no sorry not yet, other prio items come first :confused:

[2020-06-23 13:48:12] rickw001 : kk thanks

[2020-06-23 19:42:34] david218 : @bin4ry CloudFlare is free and super easy to setup. The only thing needed is probably just a subdomain for anything non-HTTP.

[2020-06-23 19:58:18] bin4ry : @david218 yeah something like that is what i am thinking about already

[2020-06-23 19:58:36] bin4ry : @david218 appreciate the input very much thank you

[2020-06-26 23:23:56] dylanholleman : Has anyone seen a significant increase in range when switching to FCC from CE?

[2020-06-26 23:45:44] loaderbull : On M2 Zoom yes. Mini boost was poor however. Waiting for an FCC for the Air 2 as i can only get about 1500m with that, very disappointed with the Air 2 range so far.

[2020-06-27 06:23:53] dexlarpsn : @loaderpoo What difference did you see compared to CE?

[2020-06-27 14:05:03] heresmydron : @loaderpoo silly question but doesnt the gps spoof hack work with air 2?

[2020-06-27 14:07:19] loaderbull : On M2 i could have gone further than my batt @dexlarpsn I have heard it doesn’t work no @heresmydron but i am iOS so cannot confirm. There was a hacked DJi fly app though maybe you could give that a try?

[2020-06-27 14:08:06] dexlarpsn : Nice. Are you using the smartRC or just the normal rc?

[2020-06-27 14:11:08] loaderbull : Tested on standard RC bud with FCC plus Boost. May be different in congested areas of wifi etc but i was on outskirts of the city. Haven’t tested with the Smart Controller yet. Blowing a gale here at the mo!

[2020-06-27 14:13:43] dexlarpsn : Ahh get that! Yeah my range is a lot worse with the smartRC so I was looking into fcc lol

[2020-06-27 17:26:11] dexlarpsn : @bin4ry Does FCC boost adds anything abnormal as in: chance that the drone/rc is getting that hot, it's able to break?

[2020-06-27 18:25:14] bin4ry : no it should be good to go! but as usual keep a eye on the heat yourself! my m2 rc1a works with boost like forever and has no problems at all.

[2020-06-27 18:46:57] cadbob : curious the difference in Removing NFZ and Custom FC with NFZ?

[2020-06-27 18:52:07] cadbob :

[2020-06-27 18:52:50] bin4ry : customFC removes nfz easy as that, no difference just two options so that you see nfz will get removed too

[2020-06-27 18:55:13] bin4ry : we didn’t list it first and people asked why nfz is not removed, i list it now and you ask why two options are present :joy:

[2020-06-27 18:55:29] bin4ry : i need to find a new way to present the features

[2020-06-27 20:36:45] dexlarpsn : @bin4ry Does Boost also works for the SmartRC?

[2020-06-27 21:09:30] loaderbull : I think he said that it does propagate to the RC but not the range is not as good as a standard RC. I know a lot pf people have been directing the antenna wrong too. I would never replace my standard RC with the SRC but it is nice having an all in one that’s for sure. CE mode just sucks in general so FCC plus the Boost mode can’t be bad for us CE suckers can it!

[2020-06-27 21:11:55] dexlarpsn : Yeah the SmartRC has a lower TX output out of the box, and yes a lot of people use the antennas incorrectly. I did a fly test the other day, the Smart RC has less range which is noticable but not that much at all in crowded spaces (city). CE sucks dick, wonder when Trump is gonna rip FCC xD

[2020-06-27 21:21:20] dylanholleman : @loaderpoo What is the FCC like compared to CE in crowded area’s with the M2 zoom?

[2020-06-27 21:47:31] dexlarpsn : @dylanholleman I remember when I was in my home country CE to FCC did make a difference of 1.5km over CE. However, when I moved to Lisbon (really crowded) somehow FCC really shined over there, giving me an advantage of +3-4km over CE. That was on my MP1 though, I am wondering if the result are the same on the MP2. But it really depends on your country, as I expierenced it myself.

[2020-06-27 21:48:21] dexlarpsn : Worth nothing that the CE range was noticable less in Lisbon than my home country, still the FCC results over there were A LOT beter.

[2020-06-27 21:49:47] dexlarpsn : Thank you for your order with [Drone-Hacks.com](http://Drone-Hacks.com)! Thanks guys for all the support so far, can't wait to try it out!

[2020-06-27 22:02:04] loaderbull : CE mode isn’t great for me, yes better if i travel out a bit more to rural parts. But FCC does punch through noise better and Boost even more so. You can improve CE with better antennas but that isn’t for everyone. Then you lose portability. Noise will always cause problems but if you have enough power to keep noise at bay then your only problem then will be battery :slightly_smiling_face:

[2020-06-28 00:36:06] originaldobo007 : Was kind of weird - months and months back when I had an M2P with the Smart RC (FCC) - I used the antennas correctly and I always got crazy good range even in crowded places. Hopefully with an M3 they will release a new Smart RC.

[2020-06-28 08:38:06] daviskat :

[2020-06-28 08:39:24] daviskat : @dexlarpsn Smart RC 2.0:wink:

[2020-06-28 08:41:08] dexlarpsn : Holy fuck :joy: where did you get this from?

[2020-06-28 08:41:31] dexlarpsn : @hkroot1314

[2020-06-28 18:15:17] dexlarpsn : I am facing issues with FCC and (and also Boost), if the drone has 4 stripes (so good connection) suddenly it drops to no connection, out of range, and then reconnects. I can fly maybe further, and after that the same happens lol

[2020-06-28 18:15:23] dexlarpsn : is this due bad interference, or?

[2020-06-28 18:15:53] dexlarpsn : 2km or so in FCC mode (in CE country) when that happened

[2020-06-28 18:40:31] bin4ry : smart controller or normal? same spot always or different spots? sounds like an error on one spot from what you describe

[2020-06-28 18:52:53] dexlarpsn : Happens with both @bin4ry And same spot as usual, without fcc I did not have the prpblem

[2020-07-01 10:02:10] dexlarpsn : @bin4ry Can I use a regular license for the same purposes as the lite license?

[2020-07-01 10:02:27] dexlarpsn : So if I buy a Regular license one, can I do the same with my M2 as the Lite on?

[2020-07-01 10:02:29] dexlarpsn : one*

[2020-07-01 10:02:34] bin4ry : yes

[2020-07-01 10:02:43] dexlarpsn : I won a key, but I already have a litle license

[2020-07-01 10:02:49] dexlarpsn : And I only have a M2

[2020-07-01 10:02:50] dexlarpsn : haha

[2020-07-01 10:02:55] dexlarpsn : Alright, thanks!

[2020-07-01 10:02:58] bin4ry : pay it forward ? :slightly_smiling_face:

[2020-07-01 10:03:10] dexlarpsn : What do you mean?

[2020-07-01 10:03:32] bin4ry : if you already have one just send it to the next lucky guy? :slightly_smiling_face:

[2020-07-01 10:03:42] bin4ry : but it is your choice, lite and regular are the same for m2

[2020-07-01 10:03:52] bin4ry : lite is absoletely enough for you :slightly_smiling_face:

[2020-07-01 10:04:18] dexlarpsn : True, if you ever find more hacks/mods for the M2 will those be included in the Lite license?

[2020-07-01 10:05:59] bin4ry : yes do not worry. IF there is ever more, existing customers will get an free and automatic upgrade to their license

[2020-07-01 13:04:28] rickw001 : @bin4ry thank you for your honesty and not making false promises on future work on updates :grinning:

[2020-07-01 14:24:59] oakley75 : I have an innocent question. Why is it a full price standard license for Air 2 when the available mods for it are the exact same as the cheaper mini lite license?

[2020-07-01 14:25:20] bin4ry : for air2 there is no license available

[2020-07-01 14:26:16] bin4ry : [https://drone-hacks.com/birdmap](https://drone-hacks.com/birdmap)

[2020-07-01 14:26:25] bin4ry : click „which license do i need“

[2020-07-01 14:26:38] bin4ry : select air 2 and your firmware

[2020-07-01 14:26:46] bin4ry : only free features

[2020-07-01 14:29:56] oakley75 : Ah roger that, i see. Thanks. At this stage, do you foresee altitude or nfz for either the MA2 or MM? I understand root is only a part of it due to encryption, but it gives me hope lol

[2020-07-01 14:31:16] bin4ry : i am currently at no point to say yes or no. so i rather don’t give any false hope.

[2020-07-01 14:58:51] fredmicrowave : Any option and progress for altitude removal will be very welcomed, including sending the board to be unlocked ...

[2020-07-01 15:46:36] oakley75 : Not sure which all models they support, but that one group does of course offer some sorta chip alteration (replacing or piggybacking) to remove certain limitations, but just not the ideal method. Risky/expensive

[2020-07-01 16:08:00] fredmicrowave : Yes, chip alteration doens´t sound like the more elegant solution, I was more thinking they could use some exploit "at home", so they don´t take the risk to be monitored...

[2020-07-01 18:17:50] oakley75 : Yeah frankly they could always resort to something like flexihub and do it remotely

[2020-07-01 19:55:37] dylanholleman : @dexlarpsn Won’t beg to you but if you have a key left that you are willing to part ways with, I’m interested my man:crossed_fingers::skin-tone-2::blush:

[2020-07-01 19:56:55] dexlarpsn : @dylanholleman If I didn't use it myself, I would be happy to give it to you. I saw drone-hacks allows height removal on Mavic Pro. So I am gonna reedem it for my Mavic Pro. Sorry bud

[2020-07-01 19:58:18] dylanholleman : Ah no problems mate! If I were you I would do the same. Thanks for the quick reply man @dexlarpsn

[2020-07-03 08:29:22] d95gas : @bin4ry Is there an issue with the Birdmap page - Currently when selecting a craft, its not showing what patching is available? that's in the new Edge (Chromium)

[2020-07-03 08:30:49] d95gas : same in IE and Google

[2020-07-03 08:33:14] bin4ry : oh

[2020-07-03 08:33:24] bin4ry : let me check it i might have fucked up the json ^^

[2020-07-03 08:40:28] bin4ry : @d95gas fixed! thank you for letting me know!

[2020-07-03 08:40:38] d95gas : No problem

[2020-07-03 08:41:08] d95gas : Yep all working :+1:

[2020-07-03 08:41:59] d95gas : I see the licensing options have changed for the better :slightly_smiling_face:

[2020-07-03 08:45:13] bin4ry : yeah they were adapted to make it easier to understand

[2020-07-03 08:45:22] bin4ry : also did you see the wizard for the license selection ?

[2020-07-03 08:45:23] bin4ry : :slightly_smiling_face:

[2020-07-03 08:45:54] d95gas : Oh missed the wizard, let me go take a look

[2020-07-03 08:46:05] bin4ry : <https://drone-hacks.com/birdmap>

[2020-07-03 08:46:07] bin4ry : there it is

[2020-07-03 08:46:31] bin4ry : we will make it default on the buy license page and a small button ("I know what i am doing take me to the licenses") below it :slightly_smiling_face:

[2020-07-03 08:46:39] bin4ry : so that there are less misunderstandings

[2020-07-03 08:47:42] d95gas : Got it, yes that works well, and should stop a lot of confusion..... not that I was confused in the first place but I know some people read things in different ways, so yes def a good call on the wizard

[2020-07-03 08:48:20] bin4ry : yes, sometimes people just have another mindset, like if you are already thinking of something else, then things are easy to miss or misinterpret

[2020-07-03 08:48:33] bin4ry : so it is a continous process of making things easier for everyone :slightly_smiling_face:

[2020-07-03 08:48:43] d95gas : Yes exactly..... Like the idiot who posted the video about NLD :slightly_smiling_face:

[2020-07-03 08:49:25] bin4ry : well that is another case .... ^^

[2020-07-03 08:49:36] bin4ry : i wanted to add the information "FIRMWARE NOT DOWNGRADEABLE" too

[2020-07-03 08:50:06] bin4ry : because ,we remove the information with the red and green, but now the info IF the firmware is downgradeable is gone due to that

[2020-07-03 08:50:16] bin4ry : that is the downside of the "cleaned" list

[2020-07-03 08:50:33] bin4ry : if someone now expects that downgrades are easy and can be done everytime. then he will be mislead again

[2020-07-03 08:51:04] bin4ry : i find it very hard to get the best level of abstraction there

[2020-07-03 08:51:16] bin4ry : like what is the minimum knowledge you can expect from someone

[2020-07-03 08:51:35] d95gas : Some people in this world just cause so many problems through their lack of understanding. But def think the way its laid out on your site and now with the wizard, there should be no querying what a particular bird can be modded too

[2020-07-03 08:52:37] bin4ry : yeah we will see :wink: and the site gets updated according to the support questions ^^

[2020-07-03 10:39:58] cadbob : well I just learned something from the New Site Layout, comparing my P4 to my MM, the MM Firmware is not down-gradable. I did not know that anyone hasn't even got that far with the Mini. DJI really locked/encrypted the drone.

[2020-07-03 10:42:43] cadbob : Wait a sec so if you flash Mini with firmware and cant upgrade/downgrade?

[2020-07-03 11:28:38] bin4ry : hm?

[2020-07-03 11:28:42] bin4ry : ofc you can downgrade

[2020-07-03 11:28:59] bin4ry : even without an exploit

[2020-07-03 11:29:15] bin4ry : currently the mavic mini has no downgrade protection

[2020-07-03 11:29:27] bin4ry : atleast for the current firmware versions

[2020-07-03 11:55:08] rickw001 : does application auto update to newest version or do I have to do that?

[2020-07-03 11:57:20] oakley75 : Air 2 is downgradable as of 250 as well. As all firmware "should" be

[2020-07-03 11:57:42] bin4ry : you have to do that it only tells you that it is a new version

[2020-07-03 11:58:33] rickw001 : thank you,didn't notice it telling me new version,lol

[2020-07-03 12:07:11] rickw001 : when you would mention update I just downloaded lastest,thanks again for quick response

[2020-07-04 08:59:10] markeviciusmodestas : Any progress on FCC mode on Mavic Mini?

[2020-07-04 10:15:21] bin4ry : no, if there is any we will post it. boost mode does however push the ce limit huge already. for everything else (also nfz etc) persistent root is needed and that doesn’t exist currently. i will like i said already a few times not make any assumptions or promised, i always want to be honest. so the earliest anyone will know about any progress is when there is something, not earlier. i like this better than promises.

[2020-07-04 10:23:43] dexlarpsn : I am at 01.04.0300 on my Mavic Pro. As far as I am aware, you can downgrade/upgrade to any FW without anyproblem right? Or does the Mavic Pro have added anti rollback these days?

[2020-07-04 10:24:08] dexlarpsn : I would like to upgrade to the newest FW on my Mavic Pro 1, since I have bugs on my FW

[2020-07-04 10:30:30] d95gas : If I recall correctly you can upgrade to the latest firmware on the MP1, that's what I will be doing later today. Cannot get on the site at the moment as Virginmedia are having problems, but sure Bin4ry will confirm.

[2020-07-04 10:31:18] d95gas : Just got on site and its says on the latest "Yes to downgrade firmware"

[2020-07-04 10:31:31] dexlarpsn : Yeah I am more concerned, if I ever wanna downgrade if I still can

[2020-07-04 10:31:34] d95gas : Obviously on the PAID version

[2020-07-04 10:32:10] d95gas : Yes its seems you can, not sure whether DJI will bother too much longer on firmware for the MP1

[2020-07-04 10:32:54] dexlarpsn : You can never be sure enough with DJI scumbags :joy:

[2020-07-04 10:33:03] dexlarpsn : Thanks for the help!

[2020-07-04 10:33:12] dexlarpsn : Just waiting on a final confirm of bin4ary

[2020-07-04 10:35:20] bin4ry : mp1 you can upgrade and downgrade without issues

[2020-07-04 10:35:52] bin4ry : with paid ofc. i am not sure for free from the top of my head

[2020-07-04 10:36:11] dexlarpsn : Yeah I have paid. Thanks! Gonna upgrade then

[2020-07-04 10:36:22] bin4ry : but i have a proper exploit for all firmwares on mp1 which works on all versions

[2020-07-04 10:36:28] bin4ry : :relaxed:

[2020-07-04 10:36:39] dexlarpsn : I don't have the Mavic Pro with me now, but is 01.04.0500 the latest FW?

[2020-07-04 10:36:46] bin4ry : yes exactly

[2020-07-04 10:36:57] bin4ry : also we habe the customFC and fcc/boost mode for it

[2020-07-04 10:37:10] mail451 : How come DH removes the extra precision in the parameters? Tried modifying the atti range to 23 as specified in retroroms and noticed it removed the extra 0s: ```konrad@konrad-pc [Downloads]: diff Parameters.dhp Modified_atti_range_to_23.dhp 4035c4035 < "value": "20", --- > "value": "23", 7005c7005 < "value": "20.000000", --- > "value": 20, 7027c7027 < "value": "4.000000", --- > "value": 4, 7038c7038 < "value": "-3.000000", --- > "value": -3, 7093c7093 < "value": "35.000000", --- > "value": 35, 7115c7115 < "value": "4.000000", --- > "value": 4, 7126c7126 < "value": "-3.000000", --- > "value": -3,```

[2020-07-04 10:37:10] bin4ry : so no altitude limit or nfz or whatever

[2020-07-04 10:37:22] mail451 : (this was on ma2)

[2020-07-04 10:37:45] bin4ry : @mail451 i will look into that! it is not intended

[2020-07-04 10:37:47] dexlarpsn : Yep, that's why I am using it. NLD doesn't provide height removal, or FCC on latest FW. Thanks for the help

[2020-07-04 10:38:06] mail451 : Ah neat, it will not effect anything right?

[2020-07-04 10:39:00] bin4ry : @mail451 not that i know of or that i can think of. but i will make sure the next version does not remove any precision, since i like things proper

[2020-07-04 10:39:13] mail451 : perfect

[2020-07-04 11:11:16] mail451 : Also, no clue on what parameter to change camera tilt speed on the wheel. "name": "g_config.mode_normal_cfg.tilt_exp_mid_point|g_config.control.tilt_exp_mid_point", "min": 0.10000000149011612, "max": 0.8999999761581421, "default": 0.25, "value": "0.250000", "changed": false, "type_id": 8 seems to have potential.

[2020-07-04 13:26:49] bin4ry : sounds good, but you have to try, my guess is as good as yours

[2020-07-04 13:55:10] cadbob : bin4ry or anyone, If I but a New Mavic 2 Zoom/Pro from DJI, of course it will come with latest Firmware, can I than re-Flash (Downgrade) it to Drone-hack recommended 01.00.0100? Not sure about Anti Roll Back issues.

[2020-07-04 13:56:02] cadbob : I'm debating on sticking with DJI or moving to Autel EVO 2

[2020-07-04 14:38:41] d95gas : I think when you buy a new one from wherever, it all depends on whether they have the old stock or new stock, direct from DJI is more likely to be new stock on the last firmware. Whether you can rollback depends what the Birdmap Wizard says

[2020-07-04 14:40:09] d95gas : Looks anything below and including 01.00.0100 and you can rollback. If its after that, then at the moment you are stuck where you are....... according to the Birdmap

[2020-07-04 15:07:15] bin4ry : correct if you get the latest firmware on m2 then you are stuck. only fcc or boost available. no downgrade possible

[2020-07-04 16:31:29] dexlarpsn : @mail451 "Also, no clue on what parameter to change camera tilt speed on the wheel." you can change that in the app if I am not mistaking, right?

[2020-07-04 17:32:49] mail451 : Can't find the setting...

[2020-07-04 17:43:09] d95gas : digdat0 is doing so some work pulling together all the various configs into excel spreadsheets, in the GENERAL section. I can see on the MP2 there is an option "knob_control_channel_KNOB_TILT_GAIN" I also think he is putting these on the Wiki: <https://dji.retroroms.info/howto/start>

[2020-07-04 17:43:26] d95gas : Worth having a look through and see if he has pulled the configs together yet.

[2020-07-04 17:44:06] d95gas : More specific: <https://dji.retroroms.info/howto/parameterindex>

[2020-07-04 18:38:58] mail451 : This is the DJI Fly app settings for gimbal

[2020-07-04 21:23:01] dexlarpsn : Ahhh, yeah DJI Fly doesn't seem to have it @mail451 DJI GO has it, DJI Fly is so basic compared to DJI GO

[2020-07-04 21:24:46] mail451 : Sucks bc I've tried to change most `*tilt*` parameters and no avail. Man DJI really dropped the ball here. Looks like the fix right now is to switch to sports mode and have faster tilt.

[2020-07-04 22:09:06] dexlarpsn : Yes, they will improve DJI Fly for sure. But DJI knowing, that will take ages. I still don't get the point of making a new app when it's not on par with the "old" app.

[2020-07-04 22:09:47] dexlarpsn : DJI Fly was number one holding me back from MA2 :rolling_on_the_floor_laughing:

[2020-07-05 02:04:17] cadbob : Damn, I just cant stand the NFZ crap.

[2020-07-05 09:36:26] mail451 : The app is so stripped down, they really need to add the Go4 features.

[2020-07-05 19:34:35] dexlarpsn : @bin4ry How long does FCC mod take? It's doing it thing for 5 mins now on Mavic Pro 1

[2020-07-06 03:57:37] bin4ry : @dexlarpsn it only runs for max 1 minute (should take even less) did you read the „ATTENTION“ part on the download page regarding exactly that „long running“?

[2020-07-06 15:22:41] dexlarpsn : Is it recommended to turn ascend/descend speed up if you are using your drone for really heigh shots?

[2020-07-06 15:22:54] dexlarpsn : If so, how much do you guys recommend?

[2020-07-06 15:23:15] dexlarpsn : @originaldobo007 I see a lot of pictures of you doing it. What do you recommend?

[2020-07-06 15:27:41] bin4ry : @dexlarpsn did you solve the problem? too much descent speed and you get problems with prop wash. but i am no expert in flying drones, just hacking them :laughing:

[2020-07-06 15:28:10] dexlarpsn : @bin4ry Yeah it seemed like a bug. It showed a loading bar in the wizard screen, but the log didn't say antyhing.

[2020-07-06 15:28:20] dexlarpsn : Rebooted the drone, restarted DH and it worked fine after that

[2020-07-06 15:28:37] dexlarpsn : Exactly what I am afraid of yeah..

[2020-07-06 15:28:44] dexlarpsn : I'll just keep it standard I guess!

[2020-07-06 15:30:15] bin4ry : glad it worked out! thanks for the feedback!

[2020-07-06 15:30:39] bin4ry : i guess you will get answers to the descent speed questions later

[2020-07-06 15:31:01] bin4ry : we have some high flight experts :grinning:

[2020-07-06 15:57:32] fredmicrowave : I am not flight expert but i used to fly forward while descending fast, to avoid prop wash. So you end up ins a fast descending spiral. You can also go forward then backward...

[2020-07-06 16:08:05] dexlarpsn : @bin4ry Are you sure the height removal works on Mavic Pro 1 on the latest FW?

[2020-07-06 16:08:13] dexlarpsn : I just tried it, but it's still bound to max 500m

[2020-07-06 16:08:49] digdat0 : I am using DH and custom fc and no issues getting past that limite

[2020-07-06 16:08:54] digdat0 : on 1.04.0500

[2020-07-06 16:11:40] digdat0 : <https://imgur.com/qMUqcIi>

[2020-07-06 16:16:33] dexlarpsn : Maybe something went wrong with my mod then, gonna do it again

[2020-07-06 16:22:18] bin4ry : do the customFC and look if it shows the customFC label in the info box

[2020-07-06 16:22:56] bin4ry : then don’t fuck around in the app, just fly. if you move the slider in the app it gets again limited to 500

[2020-07-06 16:30:41] dexlarpsn :

[2020-07-06 16:30:48] dexlarpsn : Guess it didn't work right @bin4ry

[2020-07-06 16:33:48] digdat0 : Rerun the custom fc, doesnt look like it installed

[2020-07-06 16:35:37] dexlarpsn : Did it again, it worked now

[2020-07-06 16:35:38] dexlarpsn : thanks guys

[2020-07-06 16:35:42] dexlarpsn : Gonna test it tomorrow

[2020-07-06 18:16:09] cadbob : Ohhh, Nice tip, didn't know that one! The App Corrects firmware that fast?

[2020-07-06 18:48:45] originaldobo007 : @dexlarpsn I increase my ascent to like 6 m/s and descent to 7 m/s.

[2020-07-06 19:23:00] dexlarpsn : Worked great! I only had enough battery for 1.5km high, I think my batteries are dead lol

[2020-07-06 19:23:13] dexlarpsn : @bin4ry Does FCC Boost use more RC battery power, or bird power?

[2020-07-06 20:07:18] quad808 : Bros...descent speed. Mavic 1 Pro/platinum. -10. P4P 2.0 -10. Grow some balls. Drops like a silent rock, completely stable. Just make sure you give a little throttle to slow down, and not full throttle all at once. I start hitting the throttle at no lower than around 30m to slow the drop. Too late on throttle = crater.

[2020-07-07 00:43:37] dronepilot : Air 2 DH parameter battery type change, on restart doesn’t save the value changed. Any clue on how to remove autolanding? Thanks

[2020-07-07 06:13:14] bin4ry : from physics standpoint yes. but i never noticed any time difference

[2020-07-07 06:13:55] bin4ry : @rgf8aerial if they reset they are protected :/ no idea if there is currently another way to remove autolanding

[2020-07-07 07:39:03] dexlarpsn : @bin4ry When I was flying yesterday, the app warned me that it only had enough juice to go back. After that it started landing slowly and I couldn't stop it. Is there any way to disable that parameter wise?

[2020-07-07 07:39:23] dexlarpsn : Mavic Pro 1

[2020-07-07 07:40:49] dexlarpsn : As in: RC battery or bird battery? My birds battery are not that great anymore, so every little bit battery I have less sucks.

[2020-07-07 07:41:51] bin4ry : iirc you can set that in the app? anyway i am going to introduce a second set of customFC soon with battery changes too(so you can choose which flavor to flash)

[2020-07-07 07:42:48] dexlarpsn : Yeah you can, it is set to go home. But for some reason it went landing since it was sure it hadn't enough battery to go home (it clearly had).

[2020-07-07 07:42:59] bin4ry : well more power on both devices. but that is a problematic question. bad reception might cause also more battery due to other problems :wink: you would need to try what works best for you!

[2020-07-07 07:44:27] bin4ry : ok. well maybe some <!here> can answer that better than me. my birds are only flying to test a hack, i am honestly not the best person to ask for behavior of the drone like this, as for that info you actually need to fly.

[2020-07-07 09:41:06] fstephan1 : Try ask this kind of questions in the support forum <https://www.kopter-support.de/viewforum.php?f=100>

[2020-07-07 12:04:59] bin4ry : new mavic 2 firmware 670 is now supported in DH

[2020-07-07 12:05:25] bin4ry : fcc / boost mode that is, (same functionality as in firmware 510!). needed some changes, but i am quick :wink:

[2020-07-07 12:08:32] bin4ry : this is actually a nice update. i would reocmmend it as it increases teh flight distance :slightly_smiling_face:

[2020-07-07 12:58:59] dexlarpsn : Did anyone test out the flight distance already? :slightly_smiling_face: seems like a great addition!

[2020-07-07 13:02:23] bin4ry : i only tested on the bench and modified the patch to work on this version

[2020-07-07 16:36:51] loaderbull : @bin4ry do we flash M2 RC using DH too? Not sure of steps if so...

[2020-07-07 16:38:46] bin4ry : no i didn’t add flashing support for m2 rc i don’t think it’s needed never updated mine :joy:

[2020-07-07 16:39:08] bin4ry : i may add it for convince in the future

[2020-07-07 16:56:19] digdat0 : any thoughts on how its getting more distance? update to the SDR or more power?

[2020-07-07 17:14:18] dexlarpsn : This is just decent/ascent right?

[2020-07-07 17:24:52] bin4ry : one is speed one is acceleration

[2020-07-07 17:25:49] bin4ry : speed / velocity acceleration/ change of speed over time

[2020-07-07 17:27:12] bin4ry : so if you take your car from the red light to your speed you want to drive, that is the acceleration, where the speed you want to drive and reach in the end is the speed

[2020-07-07 17:27:27] bin4ry : climb is ascent and descent is descent

[2020-07-08 05:24:51] bin4ry : anyone with m2e / m2ed up for a testride in DH for fcc / boost mod ? :slightly_smiling_face:

[2020-07-08 08:24:18] fstephan1 : Wir haben die Mavic 2 Enterprise erfolgreich getestet.... bin4ry ist genial....

[2020-07-08 08:48:54] mail451 : Drone-hacks ist wunderbar.

[2020-07-08 10:27:16] fstephan1 : <https://www.kopter-support.de/viewtopic.php?p=3203#p3203>

[2020-07-08 12:02:09] bin4ry : 1.10 released with m2e support

[2020-07-08 16:26:20] bin4ry : [https://drone-hacks.com/blog/post/121](https://drone-hacks.com/blog/post/121)

[2020-07-09 14:17:39] fstephan1 : <https://www.kopter-support.de/viewtopic.php?p=3205#p3205>

[2020-07-10 15:50:30] bin4ry : @dexlarpsn it shows fcc-boost which is the general case of you click it it explains that there are boost and fcc i can change it to fcc/boost if it is better maybe?

[2020-07-10 15:50:47] dexlarpsn : Sorry I looked over it :) all good!

[2020-07-10 15:50:52] bin4ry : ok :ok_hand:

[2020-07-11 11:49:47] dexlarpsn :

[2020-07-11 11:49:53] dexlarpsn : Mavic 2 is stuck on upgrading

[2020-07-11 11:49:59] dexlarpsn : Any advice what to do? Should I disconnect?

[2020-07-11 11:50:53] loaderbull : Looks like it has only uploaded and not done any flashing whatsoever..?

[2020-07-11 11:51:04] dexlarpsn : Yeah that is what it looks like

[2020-07-11 11:51:10] dexlarpsn : its stuck on 100% for 10mins

[2020-07-11 11:51:17] dexlarpsn : Not going further, drone is still flashing lights

[2020-07-11 11:52:01] loaderbull : Mine did take a little while for that stage but not 10mins. If controller connects and you can view video feed then disconnect and start over

[2020-07-11 11:52:18] dexlarpsn : Ah good tip, gonna try to power on the controller

[2020-07-11 11:53:19] dexlarpsn : It says updating.. on the GO app

[2020-07-11 11:53:24] dexlarpsn : Well I guess I should wait?

[2020-07-11 11:54:47] loaderbull : It may be in updating mode yes, but it still looks like no actual update has started. Just file prep perhaps. No writes.

[2020-07-11 11:55:03] dexlarpsn : So what is the best to do right now?

[2020-07-11 11:55:07] loaderbull : Leave it a little longer maybe

[2020-07-11 11:55:18] dexlarpsn : Disconnect the drone, or wait till my battery is dead (it's around 40percent)

[2020-07-11 11:55:28] loaderbull : If it does nothing you wont have much choice other than to disconnect

[2020-07-11 11:55:36] dexlarpsn : Alright, i'll wait!

[2020-07-11 11:56:00] loaderbull : Get a fully charged batt and try again after

[2020-07-11 11:56:20] loaderbull : See what happens but my guess is aircraft has lost its connection to PC

[2020-07-11 12:27:03] bin4ry : if rc says updating for a long time then it might be stuck

[2020-07-11 12:27:09] bin4ry : updating is doing the magic itself

[2020-07-11 12:27:29] bin4ry : try close DH and open dh again, it might catch the update status

[2020-07-11 12:34:39] bin4ry : normally it is hard to brick the drone. dronehacks just uploads the firmware and the drone takes over , that is how it works. so sometimes DH does not get the status message from the drone, a DH app restart helps. you should just not restart the drone during update

[2020-07-11 12:37:29] bin4ry : the RC can tell you too if in doubt. you can also try to trigger another update on top of it really stalls! the update mechanism of dji is a bit strange but (after 0000 update) solid

[2020-07-11 22:27:37] chipmangini : @bin4ry I just had my Mavic Pro loose it's compass, and crash. On its way to DJI for some Carre Refresh. I doubt that they will send me back the same bird, but if they don't and upgrade the firmware, what are my options? Thanks!

[2020-07-11 22:28:06] chipmangini : I know that with NLD, this is not possible (yet)...

[2020-07-11 22:54:16] dexlarpsn : What exactly do you mean, what is not possible with NLD?

[2020-07-11 22:55:10] dexlarpsn : As far as firmware goes, everything is possible with DH on the latest one. So you should be safe on that!

[2020-07-11 22:58:50] chipmangini : @dexlarpsn I believe that if you flashed 01.04.0400, or 01.04.0500 using DJI Assistant (what DJI would maybe do to mine), and NOT NLD, it can't be rolled back....

[2020-07-11 23:06:31] quad808 : not true...all good on both apps

[2020-07-11 23:08:10] dexlarpsn : Nope indeed. That's not true, I have the latest FW on My Mavic Pro and its modded @chipmangini so you will be fine!

[2020-07-11 23:09:01] dexlarpsn : Even IF IT IS. Why would you if all the mods are available on the latest FW ;-)

[2020-07-11 23:09:49] chipmangini : @quad808 & @dexlarpsn That's great news, thanks guys, I need the NFZ's removed, and love Altitude!

[2020-07-12 04:47:12] bin4ry : @chipmangini with DH you can have all hacks on the latest firmware :blush:

[2020-07-12 10:26:00] dronepilot : If i update M2 Fw .510 to the newest do i need to run boost patch again?

[2020-07-12 10:28:39] bin4ry : yes

[2020-07-12 10:28:56] bin4ry : in general you should always after a firmware update

[2020-07-12 10:29:55] bin4ry : if the partition does not change then it would not be needed but you never know, so just run it again to be sure all works correct :blush:

[2020-07-12 11:51:52] cadbob : I just took Delivery from my ebay purchase of a Mavic Pro and before Drone-Hacking wanted to see what I have, but GO4 on Android doesnt give me much info?

[2020-07-12 12:13:04] cadbob : Seems eaither a Older Version of App or IOS Version is more forgiving as I see what I have now

[2020-07-12 12:17:12] dexlarpsn : What else do you want to know @cadbob

[2020-07-12 12:19:04] cadbob : I'm good now that I seen IOS About Screen, but now that I'm thinking about it, I believe the Android Version is my custom Patched Version and that is why I wasn't getting the Firmware Version on AC/RC

[2020-07-12 12:33:03] cadbob : But what are all the Flysafe Database's? Thats what has me wondering, Why does DJI have so many AC and APP and Basic.

[2020-07-13 09:43:41] bin4ry : it is just different databases, nfz, warning zones, they have even more, dynamic databses which gets pushed from remote, app normal database, 2 backups

[2020-07-13 10:44:02] oakley75 : Speaking of, are there any nfz files in the mp1 RC to be removed?

[2020-07-13 10:47:24] bin4ry : don't remember how the RC looked to be honest

[2020-07-13 10:51:12] cs2000 : Not on the RC from memory :slightly_smiling_face:

[2020-07-13 10:51:28] bin4ry : ^^

[2020-07-13 15:28:44] cadbob : bin4ry, couple questions, I recv. my Mavic Pro from ebay sale, and it has .0500 firmware as you seen in earlier post, so we can re-flash with dronehacks FC Firmware I would imagine? I'm thinking of selling my P4 to re-coup some $ can the dronehacks be transferred with sale, seeing it registered to the AC so new owner has it? I know I have to buy a new lic. for MP now too.

[2020-07-13 16:03:17] bin4ry : please explain a bit more detailed and best in PM and not in public. normally a license transfer can only be done on dji replacement

[2020-07-13 16:08:17] bin4ry : ah understood the question now, mp1 customFC yes, fcc also

[2020-07-13 16:08:27] bin4ry : anyway write pm please

[2020-07-13 18:26:15] oakley75 : What is the parameter called to check the anti rollback value of firmware, and can it be checked from the bin or only after installation?

[2020-07-13 18:40:44] bin4ry : no parameter cfg file on drone and firmware you can read it in a texteditor

[2020-07-13 18:41:13] bin4ry : i could show it in the gui in one of the next versions if you guys want

[2020-07-13 18:41:21] bin4ry : the drone one

[2020-07-13 18:42:00] bin4ry : the bin one gets printed in the status window already once you load the firmware ;)

[2020-07-13 18:42:24] bin4ry : the drone one gets currently only handled internally and written to the log file of drone-hacks

[2020-07-13 18:42:38] bin4ry : but displaying it can be done real quick if wanted

[2020-07-13 19:40:42] oakley75 : That would be a dream

[2020-07-13 20:11:04] quad808 : knowing or showing what the anti-rollback value is and trying to do something about it are two completely different things.

[2020-07-14 12:45:43] bin4ry : added mavic air 1!!!!! support for firmware 100 and 200 (fcc mod!)

[2020-07-14 18:58:45] digdat0 : nice!

[2020-07-14 20:02:56] almog.baku : cool! just modded my m2zoom to fcc

[2020-07-14 20:03:47] almog.baku : and wow, boost mode drains battery really fast! dropped from 100% to 60% in half an about hour without even flying

[2020-07-14 21:37:05] dexlarpsn : @almog.baku I dont have that at all, RC battery or bird?

[2020-07-15 08:35:35] almog.baku : RC battary

[2020-07-15 08:36:15] almog.baku : latest firmware

[2020-07-18 10:14:16] almog.baku : Is RC firmware version `1.00.0640` supported by the exploit?

[2020-07-18 10:14:29] almog.baku : The app asks me to upgrade…

[2020-07-18 10:59:04] bin4ry : rc firmware doesn’t matter

[2020-07-18 13:58:00] almog.baku : also for the boosting feature?

[2020-07-18 13:59:29] bin4ry : it doesn't matter

[2020-07-18 13:59:31] bin4ry : at all

[2020-07-18 13:59:39] almog.baku : ok, upgrading

[2020-07-18 13:59:47] bin4ry : only thing which is important is that Rc1b cannot do 5.8G hack if you are in russia

[2020-07-18 13:59:55] bin4ry : that is the very only thing

[2020-07-18 14:00:19] almog.baku : im good… im with rc1a

[2020-07-20 14:05:13] bin4ry : new dronehacks version v1.11 out :slightly_smiling_face:

[2020-07-20 14:05:15] bin4ry : you can now see many things, also the production date of your drone or the current antirollback value on your drone :slightly_smiling_face:

[2020-07-20 14:58:45] rickw001 : nice,thank you:+1:

[2020-07-20 19:13:41] poopnondji : Can you add a feature that can decrypt firmware?:grin:

[2020-07-20 19:15:45] poopnondji : @bin4ry do you have any info on the MA2 processor?

[2020-07-20 22:26:41] digdat0 : ive seen some info over in ~hardware about the processor irecall

[2020-07-20 23:37:15] dronepilot : Any chance to disable autolanding on the Air 2 using DH parameters?

[2020-07-20 23:52:41] poopnondji : @rgf8aerial battery_type=0 does that, although it’s disabled in .0250.

[2020-07-20 23:54:20] poopnondji : Use DH downgrade to .0130 then you can disable it.

[2020-07-20 23:55:49] dronepilot : @vdub804 I’m on .250 firmware. So i need do downgrade to 0130 to be able to disable autolanding.

[2020-07-20 23:56:30] poopnondji : Correct

[2020-07-21 00:04:13] dronepilot : Will do this in 40 minutes give a feedback soon.

[2020-07-21 01:16:50] dronepilot : @vdub804 everything went smooth, downgrading firmware to .0130 on the MA2. Set battery_type=0 no problem. Question is i have a M2 and i have set battery_type=3 to disable autolanding and have been working perfect. Shouldn’t the autolanding be =3 and not =0 got confused.

[2020-07-21 01:26:58] poopnondji : You can use 3 I use 0 to get rid of the annoying beeping.

[2020-07-21 04:47:25] bin4ry : @vdub804 no i won't add a feature to decrypt the firmware, you can use dji-firmware-tools for firmwares that we have the keys for, for the other firmwares you would need to do it manually on the drone. if both not possible you need to get creative and exploit with drone without having the firmware :wink:

[2020-07-21 04:48:02] bin4ry : regarding the processor, no idea currently. take a look at mefistos git , he has always good information and hardware photos, also check ~hardware etc. i would just do the same :slightly_smiling_face:

[2020-07-21 10:53:58] dronepilot : @vdub804 perfectly understood 3 no autolanding with beeping, and 0 no autolanding and no beeping. That’s great didn’t no about this one, thanks allot helped me out a bunch.

[2020-07-23 11:45:16] cadbob : I would like to see Drone ID get Spoofed in Firmware, not sure if that is possible, but would be a nice feature.

[2020-07-23 14:18:28] fredmicrowave : Indeed

[2020-07-23 14:52:18] bin4ry : well that is not so easy, on spark it is. on others we could set the is package to garbage which still doesn’t hide you 100%

[2020-07-23 15:47:57] monkeyman : @bin4ry mp2p with smart controller, same power impact with non smart controller?

[2020-07-23 15:48:18] monkeyman : if fcc boost

[2020-07-23 15:54:34] bin4ry : smartcontroller does not have as good antennas as normal remote

[2020-07-23 16:02:12] fredmicrowave : Not too bad not to hide the user position, garbage or fake id could be useful.

[2020-07-23 17:46:44] bin4ry : true i will take a look

[2020-07-24 00:54:14] cadbob : No but we arent hidden when we are in NFZ, but least we keep the communist country from broadcasting our information. lol

[2020-07-24 00:59:02] cadbob : SOrt of like Laser/Radar Jammer for cars, cops can see you, but there Laser/Radar guns register 0's :slightly_smiling_face:

[2020-07-24 00:59:25] cadbob : with 0's you get no ticket lol

[2020-07-24 01:00:46] cadbob : but DJI would be on constant watch as they are banking on equipment and software for Drone ID Big $$$$ to them

[2020-07-24 03:54:37] rickw001 : any progress with glonass and precision landing?

[2020-07-24 06:19:30] bin4ry : not yet sorry. this is a low priority item at my list, because if i fuck this up i need to buy another drone :sweat_smile: and i need to do this on EVERY drone separately that uses customFC. hence it takes some time and other positions and more important for me currently, and i am a one man show in that regards :sweat_smile: so i haven’t forgot about it but it will take some more time, i cannot tell you when i will reach that state so i cannot give you any dates sorry

[2020-07-24 12:05:07] rickw001 : thanks for letting me know:+1:

[2020-07-24 18:11:03] oakley75 : Baking this option "g_cfg_debug_force_flash_led" into customfc for mp1 would be cool

[2020-07-24 18:45:29] digdat0 : what does that option do? Is it not available in parameters, its hard coded?

[2020-07-25 00:48:41] oakley75 : Yeah, it turns off the rear bright-ass light on the mp1

[2020-07-25 22:11:40] quad808 : Hello Drone Hacks peeps! I have an announcement for all of you. I am proud and honored to be asked to join the excellent Drone-Hacks team and I have eagerly accepted! Drone-Hacks is such a breath of fresh air in the hacking community, and with the exceptional leadership and skillz of Bin4ry and the rest of the team...I hope to bring any skillz I have to keep the hacking community going with some fresh approaches and provide all of you with the best support I can. It has been a hard last 6 months, (actually longer than that) but I am very pleased to have come out of it by joining a winning team, and look forward to working with some outstanding people!!

[2020-07-25 22:23:29] chipmangini : Good for you @quad808!

[2020-07-25 22:26:52] quad808 : Thanks bro, long time coming.

[2020-07-25 22:28:40] chipmangini : Deservedly so....

[2020-07-26 00:24:48] rickw001 : way to go quad :+1:

[2020-07-26 00:55:41] cadbob : Congrats!

[2020-07-26 00:56:15] cadbob : <https://arstechnica.com/information-technology/2020/07/chinese-made-drone-app-in-google-play-spooks-security-researchers/>

[2020-07-26 03:31:19] originaldobo007 : Awesome!!! Congrats!!!

[2020-07-26 16:15:34] dexlarpsn : Has been posted already 10 times lol

[2020-07-27 02:24:04] monkeyman : just now I try to downgrade the .400 firmware from the new one to .200, and if failed ( not finish) just finish uploading with no other progress using DH, antirollback maybe?

[2020-07-27 02:24:40] monkeyman : mavic mini MT1SS5 version

[2020-07-27 04:07:21] bin4ry : if after the upload it does not progress then the file upload was corrupt. try another pc. but why downgrade? 400 is perfect, it’s better than 200

[2020-07-27 13:53:30] monkeyman : have a few mavic mini us version, try to longrange flight with same route and same height, the result is the old one is the champion in distance, 1 time video black screen, but the new one 4 times black screen, and less range also 2 files

[2020-07-27 13:54:47] monkeyman :

[2020-07-27 13:55:04] monkeyman :

[2020-07-27 13:55:21] monkeyman : I just curious, signal is better in .200

[2020-07-27 13:56:11] monkeyman : is it because of FC version or firmware issue, thats why I want to try downgrade the 400

[2020-07-27 15:24:54] bin4ry : interesting

[2020-07-27 15:25:03] bin4ry : thx for the info

[2020-07-30 07:05:32] bin4ry : any more results @akbardotinfo?

[2020-07-31 01:01:08] nublish101 : erm question how does one get all the nice feature that nld onyl suppoprt on ,300 on .500 with drone hacks im curious as well i am currently tryignt ow ait for my licence to be changed over to my new bird on nld and well im considerign tryign drone hacks since well i been waitign 12 hourrs on a support ticket that was supposedly only goign to take a couple of hours according to codl flake

[2020-07-31 06:07:05] bin4ry : @nublish101 mavic pro 1 you speaking? just go here [https://drone-hacks.com](https://drone-hacks.com) and go to buy license. there is a wizard to tell you which license you need :) we even can give you a custom flightcontroller on your device which removes just all limits with one click etc ;)

[2020-07-31 12:13:37] cadbob : I have a MP1 and have mine Flashed with the all in 1 Flight Controller and FCC/Boost and fly's awesome. I was taking picture of a New School under construction in a NFZ and I would never of been able too Stock. Running lateset Firmwares and using newest software

[2020-07-31 12:26:53] cadbob : I would like to disable AutoLand on Battery for my MP1 is there a way too do this editing Param?

[2020-07-31 12:41:11] bin4ry : g_config_bat_config_enable_smart_bat_landing_portect=0 for original battery on smart battery mode

[2020-07-31 12:58:44] bin4ry : that is what was posted in dji modding lounge facebook group a few days ago

[2020-07-31 13:41:57] cadbob : thanks going to go check that out

[2020-07-31 17:45:29] quad808 : @cadbob from my notes: battery_type 3 (1) *changes to Non-DJI battery Set to 2 changes to non-DJI battery, but won't show battery %, only voltage in GO, if you have show voltage enabled. Set to 3 changes to non-DJI battery, but WILL show battery % left and voltage. Of the two settings, this is what you want to change to. g_config.bat_config.enable_smart_bat_landing_portect 0 (1) *turn off smart battery landing protection, so set this to 0. If you only change those two settings, you will avoid critical battery forced landings in all situations.

[2020-07-31 17:45:41] quad808 : ( ) are defaults

[2020-07-31 19:18:05] cadbob : @quad808 So these settings? I still dont under stand Non DJI Battery thing? I was also reading in the Facebbok group about turning off precision landing in go or settings don't work??????

[2020-07-31 19:24:53] cadbob : What I would like, is still get warnings about low battery, but not the forced landing crap, I want to decide where to land if need be. So not sure if settings you discussed is what I'm after.

[2020-08-01 00:35:55] quad808 : If you are on firmware above .0700 you need to turn off precision landing, otherwise settings can be overridden. The craft goes into another automated mode when in precision landing. You change the battery type so that the craft can't go into emergency low battery mode. If anyone knows any different, speak up. Once you change these settings, YOU are the one to monitor your battery, not the automated system. You crash, you are at fault. If you really want to get adventurous you can change g_config.landing_auto_landing_vel_L2 = -10 (-3)*this is speed of _auto landing_ above 20m. -10 is maximum descend speed. Changing this parameter means that if you want to RTH and descend at a fast rate quickly and not have to do this manually, set this to a high rate. All birds can take a setting of -10 and be fine, but the heavier birds may be best at -8. If you set this at 0, even if you do a RTH, the bird will go above home point, but will not descend and will just sit there. Do not change any settings unless you KNOW and are SURE what will happen. Test in an open field in a hover with a low charged battery to see what the bird will do when you change these settings. The vel_L2 only comes into play when you hit RTH. The Mavic Pro is a beast at -10 descend rate. Drops like a rock, but completely level and stable. L2 rate will stop at 20m, then L1 value takes over. Don't change L1 unless you want to create a small crater on your landing site.

[2020-08-01 02:56:41] cadbob : Good advise, and well taken, but I'm not that adventurous! :slightly_smiling_face: I just want control over my flying, The automated stuff can be as dangerous as it is safe. So the settings I screen shooted are the ones I need? I opened my DH's Backup with NotePad++ just to familiarize myself with the CFG Structure

[2020-08-01 02:57:56] cadbob : I figure I could even make my changes that way and flash it with DH's but I'm also going to explore the edit in DH's I'm on 01.04.0500 using DH's Custom FC on MP1

[2020-08-01 05:21:50] bin4ry : it is not advised to edit the parameter file by hand. if you put in a invalid sign it might cause unwanted effects. i would suggest to just „backup“ your settings once, and use the advanced editor to change stuff and then export it as nice settings etc. use the export and import as backups/profiles but not edit the file manually. ;)

[2020-08-01 10:16:12] cadbob : advise taken! Will do ty

[2020-08-01 13:31:40] cadbob : Love the way DH's Parameter Setting's Function!

[2020-08-01 16:33:34] nublish101 : Hey does anyone no anyone that modify official dji batterys with extra cells in Europe

[2020-08-01 16:33:50] nublish101 : I'd do it my self but don't trust my self to not kill the dji battery

[2020-08-01 16:34:55] d95gas : @bin4ry Hi dude. Talking original MP, previously had SuperPatcher on and now moving to DH. Am I as well upgrading with DH to the latest firmware (01.04.0500), then do "Flash Custom Flightcontroller", the update of firmware should have cleared out SP then, giving me a fresh start. In addition, with Custom Flightcontroller patched in, is there any need to use a custom version of DJI Go4, or am I just as well using the latest DJI Go4? Thanks.

[2020-08-01 16:35:21] nublish101 : Oh I should. Specify mpp batterys

[2020-08-01 16:36:09] nublish101 : Personally. I avoid latest dji go for talk to home shit

[2020-08-01 16:36:39] loaderbull : Good thing about android Go 4 is you can block it though...

[2020-08-01 16:36:46] nublish101 : That's true

[2020-08-01 16:36:51] loaderbull : Through firewall

[2020-08-01 16:36:56] nublish101 : But you still need to sign I. At some. Point

[2020-08-01 16:36:57] loaderbull : IOS not

[2020-08-01 16:37:18] nublish101 : What if they have a hey wrre offline let's store Thai I go for whe. There firewall. Fails

[2020-08-01 16:37:23] nublish101 : Then we will lock everythinf

[2020-08-01 16:37:30] nublish101 : My mind set on it

[2020-08-01 16:38:23] nublish101 : Ffs I can't type on pho ss

[2020-08-01 16:38:57] nublish101 : Store this for a while for when there firewall fails or they come. Back online

[2020-08-01 16:49:24] bin4ry : do a double flash of a clean 0500 to be sure

[2020-08-01 16:50:19] bin4ry : for customfc no modded app needed but of you use the stock one make sure you don’t touch the altitude limit inside the app. once you touch it it will be set that limit and you would need to reflash the customFC ;)

[2020-08-01 23:36:44] cadbob : So if one changes the Height Limit in GO and now lost in in there DH's Custom FC, can they just dirty flash the FC over the original dh's custom one? Asking for a friend. :)

[2020-08-02 02:02:14] quad808 : @cadbob if you flash custom FC, then change the 9000m limit in GO, this will change the firmware back to 500m limit, so you will have to reflash customFC again. No, you do not have to flash stock firmware first, just re-flash custom FC again. That will fix it. No reason to change that 9000 figure in GO, since basically altitude is unlocked.

[2020-08-02 03:34:30] cadbob : Thats just it I do not believe it said 9000 I think it was some weird number like 238 or something, I'm not a cloud surfer, so if I decide to re-flash Custom FC I will look and not touch and also report back.

[2020-08-02 07:10:36] d95gas : top advice as always, many thanks. :+1:

[2020-08-02 15:13:22] cadbob : Hi quad, I figured I start from scratch flash stock firmware twice and Custom FC twice, edited parameters I went took for test flight all GOOD! I did not touch SET MAX ALTITUDE, but took screen shot for you. It does not show the 9000M, looking for advise here. Please see attached

[2020-08-03 17:39:39] bin4ry : working on the latest p4pv2 firmware 5200 currently

[2020-08-03 17:41:40] bin4ry : i hope i that i have good news for p4pv2 folks tomorrow, but no promises yet

[2020-08-03 18:58:06] loaderbull : As far as i know, it does not matter what limit Go 4 displays after custom FC flash, it is unlimited. As soon as you enter a number it will then default to 500m limit regardless of what you set it to (even if you set it to 1000m etc the limit will be 500m and so on). Flash custom FC and then never touch that altitude limit to maintain NO limit.

[2020-08-03 22:13:06] cadbob : Just tried out Fly v1.1.6 with DH's FCC/Boost, I get the Normal WIFI Message, but when landing the message does not appear like it did in v1.1.5, which I like :slightly_smiling_face:

[2020-08-04 01:46:47] cadbob : What about in Litchi? Same?

[2020-08-05 05:46:14] bin4ry : anyone with p4pv2 around ?

[2020-08-05 06:31:46] loaderbull : Will be later on bud, after work...

[2020-08-05 06:33:31] bin4ry : okay

[2020-08-05 06:33:34] bin4ry : thx

[2020-08-05 06:33:53] bin4ry : new firmware 5200 hacks want a testrun :wink:

[2020-08-05 06:36:46] bin4ry : so anyone who is earlier available is very much welcome :slightly_smiling_face:

[2020-08-05 07:44:49] bin4ry : all sorted

[2020-08-05 07:45:18] bin4ry : announcement: DJI P4PV2 firmware 5200, compeltely hacked, customFC and FCC/boost mod available in dronehacks, only 2 days after release of the firmware :)

[2020-08-05 16:34:01] loaderbull : Flashed and all ready for flight. Everything looks in order but can’t fly until weather improves. @bin4ry as ever thanks, impressive time scale on the last 2 firmwares (M2 and P4P2). Now for a MA2 boost perhaps... :grin: cheers again bud!

[2020-08-05 16:51:21] bin4ry : @loaderpoo thank you for the nice words! if i can make it happen i will, i try to be as quick as possible and i hope you guys see that i am up to my word!

[2020-08-05 16:57:45] cadbob : Your the reason I chose Drone-Hacks bud!

[2020-08-06 05:30:28] hazardc : The only thing I am not fully understanding right now is how much "custom flight controller" opens up, in terms of possibilities... Is the possibility of being able to use LTE over USB to control the drone? Distance runs are fun and all but maintaining signal behind objects are the reason i want this :smile: I also want to be able to inspect some of my weather station equipment while sitting on my ass watchign the feed on a monitor or TV

[2020-08-06 06:48:11] bin4ry : @hazardc it mainly enables you to unlock prior locked functions, for example the alititude limit is written into the FC, so we removed that, before @mathieu.peyrega injected Galileo support into the FC. For what you want the customFC is not the thing to aim for, you would need a hook on the drone and write some sort of custom wrapper. it should be possible but the complexity highly depends on the drone.

[2020-08-06 14:59:33] fredmicrowave : But just to be sure, even custom FC is of no use for mp2 alt limit, right ?

[2020-08-06 15:00:14] bin4ry : there is no customFC for m2, sorry

[2020-08-06 15:09:55] fredmicrowave : Ah sorry, I mixed up with adb . Thanks.

[2020-08-07 18:17:43] digdat0 : is it possible to add a horizontal scroll bar to the advanced parameters editor on the left side? When you select a param which extends past that box, it aligns to the end of the paramter and the scroll bar would be nice to go back to the left. arrow key works as well though.

[2020-08-07 18:34:41] bin4ry : sure will do it

[2020-08-08 12:22:09] mike4884 : @bin4ry any love coming over to the mavic air2? I know its pretty locked down but maybe boost? I got my monies just a waving and it has dronehacks name on it:+1:

[2020-08-08 12:37:39] bin4ry : @mike4884 we are putting effort to get anything done, but i cannot promise anything yet. "It is done when it's done :wink:", that is the thing with hacking, you cannot promise stuff until it is really done. Sorry mate, i cannot give any ETA or something similar yet, but rest assured if there are news we will publish them. i want to be 100% honest, so please do not buy yet, only buy if the feature is available :slightly_smiling_face:

[2020-08-08 12:40:58] mike4884 : I will be buying regardless :grinning: I always supported you back when you were killing it on xda :+1: and I definitely know how it is. I haven't popped in in a while was just seeing how things we're going. Congrats on the success of dronehacks. Looks like its feature-rich and ui looks sweet / user-friendly

[2020-08-08 12:42:18] bin4ry : thank you :slightly_smiling_face:

[2020-08-09 20:28:42] originaldobo007 :

[2020-08-10 08:18:34] bin4ry : nice :slightly_smiling_face: which bird ?

[2020-08-10 08:26:48] bin4ry : new mavic air 2 firmware. 01.00.0340

[2020-08-10 08:26:50] bin4ry : release notes:

[2020-08-10 08:26:58] bin4ry : ```• Added Safety Flight Mode. The aircraft avoids obstacles automatically and will not respond to commands to fly left or right. • Added 4K Zoom Mode, which supports 2x digital zoom when set to 4K 30/25/24 fps. • Added 2x digital zoom when set to 2.7K 60/50/48/30/25/24 and 4x digital zoom when set to 1080P 60/50/48/30/25/24 in video mode. • Added 4K resolution in Hyperlapse. • Optimized FPV mode for gimbal. • Optimized shooting performance when flying forward in Sport mode. Adjust the flight attitude to avoid propellers unexpectedly showing up in the camera view. • Optimized Hyperlapse. Added ability to pause shooting during Hyperlapse, increased the number of waypoints to 45, and added support for Task Library. • Optimized ActiveTrack when tracking vehicles at low altitude.```

[2020-08-10 08:27:07] bin4ry : antirollback value is still the same as before :slightly_smiling_face:

[2020-08-10 08:27:19] bin4ry : but sorry no hacks for this currently, this is just an informational post

[2020-08-10 13:56:49] originaldobo007 : Still no ability to change the max ascent/descent speeds?

[2020-08-10 13:57:00] originaldobo007 : P4P2

[2020-08-10 14:17:55] bin4ry : the min/max levels of paramters in genral can only be changed with a customFC, it is very unlikely that there will be a customFC for anything m2 and newer

[2020-08-10 14:33:36] bin4ry : awesome !

[2020-08-10 16:35:56] heresmydron : @originaldobo007 have you tried changing `vert_vel_down_adding_max_0` ? i changed it in mine to -10 but havent tested it yet. in the mini you need to combine it with `vert_vel_down_0` (which is limited to -3 in MA2), hopefully its not the case with the MA2

[2020-08-10 16:38:26] originaldobo007 : MA 2 is already maxed out. -3 I believe is max. I actually don’t have an MA2 but am interested in anyone who knows how to change ascent descent max speeds because it is likely the M3 will operate the same way- and that’s the drone I’m interested in getting next.

[2020-08-10 17:57:42] originaldobo007 : Need the ascent and descent speeds to be increased to do things like this:

[2020-08-10 19:39:22] poopnondji : Yea they pulled a dick move locking out the ascent/descent speeds on the ma2

[2020-08-10 19:39:40] poopnondji : Sport mode speeds too

[2020-08-10 19:51:48] oakley75 : Is it more unlocked on the really old firmwares?

[2020-08-10 20:05:59] poopnondji : yea even my mini can adjust those params

[2020-08-10 20:07:57] poopnondji : they also removed battery_type=0-3 with firm .0250

[2020-08-10 20:08:31] poopnondji : stuck with battery_type=1

[2020-08-10 20:11:47] poopnondji : @reoak think I misread your ? but yea I downgraded to .0113 those params was still locked, all except battery_type.

[2020-08-10 21:07:14] oakley75 : Ah good to know, I thought they may still be locked couldn't remember. Ascent-descent speed is so dang important, looking forward if bin4ry can work some magic!

[2020-08-10 21:51:25] chipmangini : @bin4ry I have a Mavic Pro with 2 controllers, one stock, and the other set up for amps. I would love to run boost on my stock one, but am concerned that it may not be good for a boosted signal going directly to the amps. Thoughts?

[2020-08-10 22:49:43] quad808 : Yah, don't run boosted if you have external amps....it will fry them most likely.

[2020-08-11 22:05:01] originaldobo007 :

[2020-08-12 12:12:30] bin4ry : ok, os x version is ready for more public testing, any testers with (especially p4pv2 and m2) are very welcome, but only through PM here !

[2020-08-12 18:32:39] quad808 : Excellent!!

[2020-08-13 09:43:38] monkeyman : @bin4ry please help, cannot enable adb

[2020-08-13 10:03:28] bin4ry : what are you trying there? This is OSX with the windows version? this can never work ...

[2020-08-13 10:07:15] monkeyman : I using parallel

[2020-08-13 10:07:25] bin4ry : this does not work

[2020-08-13 10:07:30] bin4ry : parallels cannot work

[2020-08-13 10:07:33] bin4ry : no virtualization

[2020-08-13 10:07:34] monkeyman : for professional license?

[2020-08-13 10:07:36] bin4ry : no

[2020-08-13 10:07:50] bin4ry : virtualization does not work on apple for this kind of stuff we need it to do

[2020-08-13 10:08:03] bin4ry : the underlaying OS does not forward all needed devices properly

[2020-08-13 10:08:03] monkeyman : I did all my bird using this parallel al the time :smile:

[2020-08-13 10:08:09] bin4ry : for m2 and p4pv2

[2020-08-13 10:08:12] bin4ry : i mean

[2020-08-13 10:08:16] monkeyman : ahhh ic

[2020-08-13 10:08:18] monkeyman : ok ok

[2020-08-13 10:08:23] monkeyman : I will try the osx

[2020-08-13 10:08:24] monkeyman : wait

[2020-08-13 10:08:26] bin4ry : :slightly_smiling_face:

[2020-08-13 19:52:06] dronepilot : Tried to upgrade and downgrade firmware on DH platform bird M Air 2 no good doesn’t go.

[2020-08-13 20:06:33] quad808 : Maybe just a tad, smidge, more details would help, maybe? Other than "no good doesn't go"

[2020-08-13 21:19:31] fstephan1 : @rgf8aerial Mavic Air 2 No Downgrade possible, check Birdmap -> <https://drone-hacks.com/birdmap>

[2020-08-13 21:35:54] dronepilot : @fstephan1 thanks will have a look, didn’t check the bird map.

[2020-08-13 21:36:47] dronepilot : @quad808 didn’t check bird map.

[2020-08-13 21:41:48] quad808 : run DH, connect drone, always check in the top left status windows for roll back info...it will tell you if can or not...if the firmware you are trying to get to has a different number, if DH can flash the firmware it will tell you in the status window.

[2020-08-13 22:17:32] poopnondji : I downgraded Ma2 using win version 1.08 Linux version wouldn't work tho

[2020-08-13 22:20:13] poopnondji : Might've been 1.10 my bad it was back in June

[2020-08-13 23:54:56] dronepilot : @vdub804 i manage to downgrade using DJI Assistant no issue. Didn’t like the newer firmware with the zoom option.

[2020-08-14 00:07:03] poopnondji : gotcha, yea I downgraded from .250 to .113

[2020-08-14 04:20:25] bin4ry : not correct, just not possible to downgrade via exploit. if the antirollback is the same downgrade is always possible

[2020-08-14 04:21:49] bin4ry : if you have problems i would love if you can send the log file and a proper description. it is the only way for me to fix the problems, all features inside the app run flawless on my machine, so if you get problems there is a 99% chance i don’t know if them. and if i don’t know then i can’t fix them

[2020-08-14 09:57:02] trulala69 : Hi, jusdt a question, I've applied the boost hack to the Mini RMT. Im experimenting with the HDRPano App which uses the new SDK and everytime when I switch to the DJI Fly App, it asks for a restart of the aircrafts Wifi ... this is a problem in flight! How do I prevent this other than deinstalling your patch?

[2020-08-14 09:58:56] trulala69 : And I'm a bit shy to test this in flight atm ...

[2020-08-14 10:51:43] bin4ry : why is that a problem? in flight the drone does not restart so there is nothing to worry. this message was removed btw by the latest dji fly version on some devices. the drone will only restart if motors are shut off. the message itself is coming from fly, there is nothing i can do about it, removing the patch is your only option then. but again, drone will not reboot in flight

[2020-08-14 11:19:59] trulala69 : Ok, should have armed it then it would've been clear ... thanks for clarifying!

[2020-08-14 11:21:37] bin4ry : no problem

[2020-08-16 16:15:28] nublish101 : hey guys anyone able to give me soem good settings both drone and go side to stop super jerky movement im a little heavy handed so in sports mode and even in normal on my mpp i find turnign is wayyy over sensative

[2020-08-16 17:00:47] bin4ry : i would recommend to play with app settings. exp for the sticks try to play with it. recommendations are hard to give but maybe check articles likes this (only googled this one cannot say if it is good or not ;)) [https://www.dronegenuity.com/dji-go-4-sensitivity-settings/](https://www.dronegenuity.com/dji-go-4-sensitivity-settings/)

[2020-08-16 17:52:45] nublish101 : cheers @bin4ry I used to have soem good settings but i set my stuff back to what i thought was those settingas and it sitll feel far to snappy would be inetrestng if its posible to remvoe the limits on EXP curve on the go app thats cracked like i use the last cracked version i forget what version number it is but would be interesting if you could surpass the coded limits since its cracked

[2020-08-20 17:17:10] monkeyman : Mavic air 2, max distance hardcorde 1111 meter the signal totally lost and reconnect at 9000m, I wonder this setting on the drone or on the remote, if DH could investigate and find this parameter setting would be a plus :grin::+1:

[2020-08-20 17:49:24] oakley75 : Occusync limit?

[2020-08-20 17:55:58] bin4ry : i can take a look but i dont think the hardcoded limits can be removed by us really

[2020-08-21 01:22:33] monkeyman :

[2020-08-21 07:32:57] heresmydron : is it me or slack's embedded player sucks donkey balls? i cant play any videos on ff

[2020-08-21 07:49:07] d95gas : I dont have any problems playing the videos

[2020-08-21 08:21:33] heresmydron : must be one of all the plugins i have...

[2020-08-21 13:34:19] bin4ry : Dronehacks v1.12 released! - changelog: Offline mode for free features (software needed to be online atleast once) Public beta version for mac Split to old and new linux releases (in dependency of glibc) Minor background fixes and features <https://drone-hacks.com/download>

[2020-08-21 21:10:00] quad808 : :+1:

[2020-08-22 21:55:53] dkovar : @originaldobo007 Enough.

[2020-08-22 22:01:14] originaldobo007 : This isn’t the NLD forum.

[2020-08-22 22:01:45] originaldobo007 : Please stop patrolling other forums.

[2020-08-22 22:03:52] dkovar : Kicked.

[2020-08-23 21:00:37] dronepilot : Hi guys! How to downgrade Air 2 firmware? I did upgrade to the newest firmware, and downgraded using assistant 2 the problem is that when powered on the imagem flickers, i upgraded again everything back to normal. I would like to run on lower firmware, didn’t enjoy range on the newer firmware.

[2020-08-24 02:52:44] quad808 : Currently firmware downgrading is locked, and only available with firmware allowed by DJI.

[2020-08-25 19:50:27] dronepilot : Manage to downgrade using DJI assistant, the point is if you downgrade from the latest to .130 the image flicker and the app freezes. Did the downgrade to .250 first and then to .130 everything works great now. Equipment Air 2.

[2020-09-03 18:36:47] quad808 : All you Autel owners...Drone-Hacks has you covered. You can now downgrade the Autel firmware! Drone-Hacks giving some loving to the Autel drones...check our blog for details, and we are working on more features for Autel drones too!

[2020-09-03 18:37:39] quad808 : <https://drone-hacks.com/blog>

[2020-09-03 19:00:30] digdat0 : thats pretty dang sweet!

[2020-09-04 02:51:47] quad808 : Working for the EVO I and II!

[2020-09-08 17:55:56] hazardc : fuck yeah Drone hacks covering autel ... you guys are going places :slightly_smiling_face:

[2020-09-08 17:56:18] hazardc : now i'm going to the "other guys" channel to bitch about their "p4p custom flight controller and boost mode"

[2020-09-08 19:39:09] quad808 : Drone-Hacks does a LOT of testing to ensure everything just works the way it should

[2020-09-10 23:10:07] dronepilot : Hi guys just added a new M2 Zoom to the fleet. It came with the latest firmware, any way to downgrade to .100 or just fcc + boost on the latest firmware can be done? Thanks

[2020-09-11 04:45:02] dexlarpsn : Just fcc + boost can be done @rgf8aerial

[2020-09-11 05:00:23] bin4ry : @rgf8aerial @dexlarpsn is 100% correct. just fcc and/or boost can be done. downgrade is not possible sorry

[2020-09-11 09:04:18] dronepilot : Thanks @dexlarpsn and @bin4ry. Later today will insert a DH license on this bad boy. This new firmware dji claimed better range. Any thoughts on this?

[2020-09-11 09:04:42] bin4ry : actually it is true :wink:

[2020-09-11 09:04:57] bin4ry : they optimized the system

[2020-09-11 09:05:05] bin4ry : so if you are already >100 then go for the latest one

[2020-09-11 09:05:15] bin4ry : only reason to not to update would be fw 100

[2020-09-11 09:10:26] dronepilot : Perfectly understand i have a 2 Pro running on .100 fw it’s nice to have NFZ unlocked. Now i have 2 M2 bird running different firmware can i use latest firmware battery on a .100 bird?

[2020-09-11 09:12:08] bin4ry : hm, i never tested to swap batteries between birds

[2020-09-11 09:12:15] bin4ry : but i don't see a reason why it shouldn't work

[2020-09-11 09:12:26] bin4ry : but maybe others can give a better answer

[2020-09-11 10:48:03] oakley75 : I've had issues with that. Mavics have shown mismatch error but still flew. Phantoms have not allowed motor start. My personal experience to help.

[2020-09-11 23:05:37] dronepilot :

[2020-09-11 23:06:58] dronepilot : Little test over the congested city. Boost + battery type 0 M2 Zoom brand new latest firmware DH Rocks. You guys are fire :fire:

[2020-09-11 23:11:25] quad808 : Bro...wow. I am impressed with this video. You were so low and so many obstacles and interference. WOW! How far could you go on the same course without boost??

[2020-09-11 23:16:38] dronepilot : Didn’t test without boost got directly on boost business. :joy::joy::joy: Yeah the flight was very low, very happy with the results. Thanks @quad808

[2020-09-11 23:17:45] dronepilot : @originaldobo007 cheers mate enjoyed the flight. Impressed how the signal holds great.

[2020-09-12 08:57:10] heresmydron : how noisy is the M2 at 50kph? im always scared of attracting the wrong attention when flying low and fast

[2020-09-12 09:30:51] dronepilot : It’s not so noisy. But at 50km/h looks like something ripping at the sky at low altitude.

[2020-09-12 10:33:42] dexlarpsn : @heresmydron Comparable to a M1 Platinum if you ever heard that. Tbh I dont notice a big/huge difference between the two. Your altitude also affects sound a lot

[2020-09-12 11:29:36] fredmicrowave : Low nois props are great improvement, specially in a steady straight flight. Still noisy climbing, but always less than original props.

[2020-09-13 14:50:03] fstephan1 : set the channel topic: DroneHacks homepage: Up | Support: Up | Latest Version: 1.12

[2020-09-15 10:52:08] fstephan1 : set the channel topic: DroneHacks homepage: Up | Support: Up | Latest Version: 1.12 | community forum: [kopter-support.de](http://kopter-support.de)

[2020-09-16 10:13:47] cs2000 : set the channel topic: DroneHacks homepage: Up | Support: Up | Latest Version: 1.12 |

[2020-09-18 17:21:13] dronepilot : Anyone tested M2 MC .670 with boost and .100 Rc firmware? I’m getting some lag issues on the app screen. Running iOS 11 Pro Max 512gb not really happy. Just a reminder this test was with latest Rc firmware, didn’t test yet with .100 rc.

[2020-09-18 17:22:47] dronepilot : Forgot to mention, litchi app runs better with signal strength comparing to dji go 4 app.

[2020-09-18 20:07:55] dronepilot : Just tested boost latest firmware M2P bird, rc running litchi beta update 2.9.0. Today is a very hot day, landed 60 celcius battery. Stock antenna, battery type 0 everything smooth.

[2020-09-18 20:13:56] quad808 : Bro...love it. Take off from the roof right outside of a window....brilliant!

[2020-09-18 20:19:07] quad808 : @rgf8aerial 2.4 or 5.8 flight or auto?

[2020-09-18 20:44:34] dronepilot : hahahaha roof flight @quad808 it’s amazing. Channel everything in auto and HD setting.

[2020-09-18 23:08:31] quad808 : @rgf8aerial question for anyone including you...on the M2 RC with boost applied, do you ever hear the internal fan on the RC kick off, as compared to not boosted??

[2020-09-18 23:13:34] dronepilot : Never heard the fan, boost or fcc.

[2020-09-18 23:21:50] loaderbull : Yes i have, was worried it wasn’t working at one point but it did eventually kick in. I tested it inside just sat there connected to the M2Z for that very reason after applying boost.

[2020-09-18 23:29:43] dronepilot : I will check again, maybe I’m bad at hearing sometimes. ?

[2020-09-19 00:51:14] quad808 : thanks guys

[2020-09-19 09:55:43] dronepilot : Thanks @originaldobo007 great flight. Starting to like litchi app + dh boost. Cheers :raised_hands::skin-tone-2:

[2020-09-19 15:17:24] dronepilot : @quad808 today morning did some new range flights, i did hear the cooling fan on the rc.

[2020-09-19 17:36:28] dronepilot : What version of DJI Go 4 do you prefer especially running iOS?

[2020-09-19 17:45:44] originaldobo007 : I honestly just use the latest version of GO4 on iOS.

[2020-09-19 21:56:38] dronepilot : Did some quick test today, on DJI Go 4 version the winning until now is 4.3.10 holds up great on distance with boost equipment M2. Tomorrow will give a try on version 4.3.12 also, latest version 4.3.38 my range doesn’t hold well past 7km.

[2020-09-19 21:57:20] dronepilot : Will post shortly a small video of today’s flight.

[2020-09-19 22:11:53] dronepilot : Here we go one more better range, DJI Go 4.3.10 boost DH M2 latest firmware.

[2020-09-19 22:51:32] joandeclerc1992 : Impressive @rgf8aerial do you use stock antennas? Dont think so right?

[2020-09-19 23:06:23] dronepilot : Stock antenna, stock battery only boost applied.

[2020-09-20 01:05:24] originaldobo007 :

[2020-09-20 11:32:11] dronepilot : Outstanding quality @originaldobo007, love city night flight.

[2020-09-20 20:22:28] heresmydron : wheres that?

[2020-09-21 00:59:10] cadbob : Used Silencio Remote on my MP1 Controller and worked as described. I than wanted to go back to stock, so flashed it 3 times with assistant trying to get controller sound back, with no go on sound still silent. Anyone run into this?

[2020-09-21 01:14:25] oakley75 : I have. It came back after flashing a newer fw for me

[2020-09-21 03:11:10] originaldobo007 : Thank you my Friend!

[2020-09-21 10:56:22] dronepilot : :raised_hands::skin-tone-2:

[2020-09-23 14:12:25] dronepilot : Can a SC downgrade firmware without DJI assistant 2? Thanks

[2020-09-23 19:33:11] dronepilot : Starting to get some nice low rang with SC.

[2020-09-23 19:35:21] quad808 : Bro....I am telling you, that is the best flying setup. I need to do something like that.

[2020-09-23 19:41:17] dronepilot : Yes @quad808 everything simple and straightforward. Was just wondering on how to downgrade firmware version under .650 that assistant 2 alow to downgrade.

[2020-09-23 19:43:51] quad808 : LOL, I was talking about flying out of your window!

[2020-09-23 19:45:13] dronepilot : hahahahha that’s nice window flying i love it.

[2020-09-24 05:27:52] bin4ry : @rgf8aerial i don't think it is possible currently. Noone has made a flasher for the SC

[2020-09-24 08:03:55] daviskat : Maybe SC can enter recovery mode to refresh the old system.

[2020-09-25 15:51:53] bin4ry : i2 support :) [https://drone-hacks.com/blog/post/175](https://drone-hacks.com/blog/post/175)

[2020-09-25 19:49:09] flymymavic : run silencio again and choose enable sounds

[2020-09-25 20:42:15] digdat0 : i know some i2 pilots gonna be happy about that!

[2020-10-06 14:45:49] dronepilot : Mavic Mini is it worth boost on a fcc unit?

[2020-10-06 16:23:49] bin4ry : Mavic Mini CE vs. FCC model: FCC drone in CE country = CE power FCC drone in FCC country = FCC power FCC drone in CE country with boost = CE power boosted (a bit higher on the 5G band than the CE model due to a hardware amp inside the RC, but missing 2.4G because no hardware for 2.4G in the RC) FCC drone in a FCC country with boost = FCC power boosted (highest power) CE drone in a CE country = CE power CE drone in a CE country with boost = CE power boosted (2.4G has the best range and most power on the lowest channel!) CE drone in a FCC country = FCC power BUT both channels 2.4G and 5G! CE drone in a FCC country with boost = FCC power boosted WITH both channels avaiable (best option!!!)

[2020-10-06 22:59:20] dronepilot : Thanks @bin4ry I’m in CE country and fcc mavic mini will give a try on boost later this week. Will try to get 6km round trip only boost, stock battery and antenna.

[2020-10-07 12:00:38] dronepilot : Here we go boost, stock antenna and battery. Mavic Mini first flight no testing. Everything straight forward.

[2020-10-07 12:09:51] bin4ry : awesome :+1:

[2020-10-07 12:31:29] dronepilot : Thanks @bin4ry awesome DH job :fire:

[2020-10-07 12:37:43] bin4ry : thank you! awesome video. how far did you get before boost?

[2020-10-07 17:12:34] quad808 : @rgf8aerial wow, to the very limit of battery...well done!

[2020-10-07 17:14:36] dronepilot : @bin4ry 5km before boost, same spot and same day.

[2020-10-07 17:17:45] dronepilot : @quad808 correct that’s the limit for normal charge. On the signal i feel that I can do a bit more but the battery could not hold. Really was aiming for 7km when 6km was achieved, but I get the feeling that the battery will come short.

[2020-10-07 17:20:02] dronepilot : You guys are awesome. Tomorrow will purchase a new mini license for a new mini bird since a friend liked só much the one that i was using that he bought from me and tomorrow will receive a new one.

[2020-10-07 17:24:09] bin4ry : awesome :sunglasses:

[2020-10-07 17:24:27] bin4ry : if you put that video on youtube we will embed it to the homepage :blush:

[2020-10-07 17:26:37] quad808 : That take off and flight was optimal, being sparsely populated and high take off point. I noticed wind warnings on the way back...that could have contributed to less range, but signal was great. CE or FCC with boost?

[2020-10-07 17:28:34] quad808 : This makes me wonder what the optimal flight speed for the mini is...speed vs battery drain....

[2020-10-07 17:43:30] bin4ry : @quad808 this was a boosted fcc drone in a CE country. which is particular interesting as it doesn’t give as much power as the fcc drone boosted in a fcc country per my list above (scroll up to see it ;))

[2020-10-07 17:50:07] quad808 : Yep, saw that list, and nabbed it...LOL

[2020-10-07 18:03:01] bin4ry : :grin:

[2020-10-07 18:23:23] dronepilot : @bin4ry yes will upload to YouTube. Later will share the link.

[2020-10-07 18:24:29] dronepilot : New mini coming today just received the message from the currier department. New license purchased.

[2020-10-07 19:41:21] originaldobo007 : The drone-hacks team is fucking awesome. Not sure if they truly realize the amount of extra enjoyment they are providing so many people.

[2020-10-07 23:52:38] dronepilot : Yeah loving DH software. No problem at all everything straight forward.

[2020-10-08 03:05:28] cadbob : So true!

[2020-10-08 06:40:07] bin4ry : :heart:

[2020-10-08 08:19:10] cs2000 : Slower the better usually. I did back-to-back flights with the MP1, same height and flight path and got 1/3rd less distance when flying using sport mode than standard mode due to battery drain causing a RTH earlier than in standard mode/

[2020-10-15 03:11:08] monkeyman : @bin4ry P4 Obsidian can boost using DH?

[2020-10-17 15:26:22] bin4ry : fcc and boost ist only available at occusync devices, therefore starting at p4p v2

[2020-11-07 14:14:01] trulala69 : Hi, I know MM2 isn’t supported yet, but do you have an idea why we can read parameters but DH gets stuck while writing them? Thanks :pray:

[2020-11-07 15:21:08] bin4ry : please send me the log file from the process (private message because it contains your serial number) so i can look what is going on.

[2020-11-07 15:26:37] bin4ry : @trulala69 ^

[2020-11-07 15:27:25] bin4ry : you find the log file in the folder c:\users\your username\.dronehacks

[2020-11-07 15:31:54] trulala69 : Ok, give me a sec ...

[2020-11-07 16:02:39] bin4ry : parameters fixed :slightly_smiling_face:

[2020-11-07 16:12:37] loli88ie : hello, now can you write from dronehack?Mm2

[2020-11-07 16:14:12] bin4ry : yes parameter writing is functional now

[2020-11-07 16:24:20] loli88ie : Good work, it works perfectly , thanks

[2020-11-07 16:24:50] bin4ry : :slightly_smiling_face:

[2020-11-07 16:24:58] bin4ry : soon a new release which will also fix a flashing issue

[2020-11-07 18:39:26] bin4ry : <https://drone-hacks.com/blog/post/201>

[2020-11-07 19:20:23] dronepilot : Congrats @bin4ry

[2020-11-08 09:06:05] declercjonas : @bin4ry I am about to sell my Mavic Pro but it has a drone-hacks license on it. Do I need to give that person my login so he can use DH? Or is it bound completely to serial?

[2020-11-08 09:20:04] bin4ry : it is bound to your login credentials

[2020-11-08 09:22:32] bin4ry : so i would not hand over the creds if i were you, but thats of course your choice. as the person will never be able to access your email address and thus cannot get support properly and you will still get all email traffic etc.

[2020-11-08 10:20:27] fstephan1 : I think, there will not a new firmware for this old bird again. Ask the buyer what setup hi need and flash what he select.

[2020-11-09 13:40:12] bin4ry : WM245/WM246 update in dronehacks. New firmware 01.01.0720 is supported now. see the birdmap <https://drone-hacks.com/birdmap>

[2020-11-09 14:36:35] fstephan1 : WM245/WM246 = Mavic 2 Enterprise / Enterprise Dual

[2020-11-09 16:16:39] kilrah : A little suggestion, when editing params it would be cool to be able to directly input the value, not just use the slider... kind of impossible to get an exact value on a 24bit number using the slider, especially since cursor keys/page up/down won't work to move the slider :slightly_smiling_face:

[2020-11-09 16:16:47] kilrah :

[2020-11-09 16:32:40] bin4ry : haha you are right, will put it on the todo

[2020-11-09 22:09:28] dronepilot : Hey @bin4ry this front led customize RGB can change the color from red to another?

[2020-11-10 05:21:57] bin4ry : sorry i am the wrong person to ask ;) check in the mini channel if someone managed to do it

[2020-11-10 10:51:09] dronepilot : Okay :+1::skin-tone-2:

[2020-11-10 15:23:30] kilrah : hmm the beta app tends to crash while reading params

[2020-11-10 15:24:47] kilrah : Info: Searching for device... Info: Device connected! Info: Checking if there is an upgrade in progress Info: No Upgrade in progress continue normal start Info: Searching for device... Info: Device connected! Info: Checking if there is an upgrade in progress Info: No Upgrade in progress continue normal start

[2020-11-10 15:24:59] bin4ry : oh rly? i need to get my hands on one of the drones ^^

[2020-11-10 15:25:29] kilrah : ok it searches for devices twice but enables the tab after the first, if you click on it before it's finished the 2nd checking if upgrade then it'll load a bit then crash

[2020-11-10 15:25:39] kilrah : if you're more patient than I am it's OK :smile:

[2020-11-10 15:25:54] bin4ry : hmm sounds strange and should not happen ofc

[2020-11-10 15:28:15] kilrah : Yes it works

[2020-11-10 15:28:42] kilrah : it's BRG, not RGB for some reason though

[2020-11-10 15:34:35] kilrah : forearm_led_ctrl is enable flags, bit 0 is front, bit 2 is back

[2020-11-10 15:35:04] kilrah : front_led_customize_mode 0 off, 1 on, 2 breathing, 3 slow flash, 4 fast flash, 5 rainbow mode

[2020-11-10 15:53:12] kilrah : ok it only checks twice depending on the timing between launching the app and connecting the aircraft, so i guess it's the aircraft disconnecting at a certain point and reconnecting, but the app has trouble with that apparently

[2020-11-10 16:02:10] kilrah : sometimes the app switches me to the flashing tab while params are loading too, also a question of timing it seems

[2020-11-10 16:09:24] bin4ry : oh funny, can you maybe get me the log files!? homefolder\.dronehacks then i can look tomorrow if i can see what’s up

[2020-11-10 16:14:28] kilrah : sure, sent

[2020-11-10 22:44:44] quad808 : hey @kilrah long time no see!

[2020-11-11 00:21:14] dronepilot : That’s nice works on the M2 this front led config?

[2020-11-11 06:13:52] kilrah : yup :slightly_smiling_face:

[2020-11-11 06:24:55] kilrah : m2 doesn't have an rgb led but yeah they all have some ways to change things in a way or another

[2020-11-12 11:25:39] bin4ry : the people with the mini2 who had issues flashing with thre previous version, could you please check out this version and tell me if it solved the problem?

[2020-11-12 12:43:02] loli88ie : this evening try

[2020-11-12 17:24:26] loli88ie : Info: Application started version 1.13 Info: Getting compatibility map from drone-hacks server Info: Map successfully received. Info: Searching for device... Info: Device connected! Info: Checking if there is an upgrade in progress Info: No Upgrade in progress continue normal start Info: Reading parameters... Info: Parameter reading finished! Info: Selected firmware file information: Device: wm161 FirmwareVersion: 01.00.0000 Antirollback: 0 Info: Antirollback values identical, flashing possible. Info: Start flashing firmware process... Info: Enter final flashing stage! Info: Flashing failed, please re-try!

[2020-11-13 11:43:21] bin4ry :

[2020-11-13 11:46:04] bin4ry : @channel anyone with a mini2 please test this beta with flashing

[2020-11-13 11:46:50] flymymavic : sorry i cant help mate, i had the mini 1 and hated it,

[2020-11-13 12:00:35] pingspike : who woke me up?

[2020-11-13 12:02:07] kilrah : works perfect here :slightly_smiling_face:

[2020-11-13 12:07:33] chipmangini : Haven't gotten one yet...

[2020-11-13 12:28:37] mel69hash : MM2 got FCC boost?

[2020-11-13 12:49:34] trulala69 : Was working for me (as you already know :slightly_smiling_face: ) ... thanks again for making this work for us!

[2020-11-13 12:56:51] bin4ry : no only normal flashing of firmware. first steps ;)

[2020-11-13 13:00:35] mel69hash : :ok_hand:

[2020-11-13 17:41:20] markusfriedl : is it possible with first firmware of mini 2 to set the vert up/down higher in sport mode or is it limited like in current firmware version? kinda unhappy with the 3m/s downwards

[2020-11-13 19:56:59] heresmydron : not sure if someone alreayd confirmed here it if works or not but have you tried the gentle mode params? @markusfriedl

[2020-11-13 20:07:14] trulala69 : I thought gentle mode is also restricted according to @kilrahs tests or am I missing something?

[2020-11-13 20:11:57] markusfriedl : @heresmydron no i haven't cause i did not know how i can then apply the gentle mode on the remote? but like @trulala69 mentioned i also thought gentle mode couldn't be used for that

[2020-11-14 03:20:31] kilrah : yeah from my tests i can select gentle mode, it does take the gentle param set, but when vspd is set higher than +5/-3 the aircraft still won't do more.

[2020-11-14 17:13:54] pingspike : has anyone done anything with droneid? Re aeroscope - and either spoofing or nullifying the id data that aeroscope can pick up? (Ie. the stuff that's still broadcast even with the identification options turned off in the app)

[2020-11-14 17:44:01] fbi.airfield51 : Would be nice to have, Like changing a Mac address

[2020-11-14 20:35:37] jcase : risky thing to release, that is something that could cause serious regulatory smack down on dji, and because of that risk, we could see some serious security work on DJIs going down

[2020-11-14 21:39:53] pingspike : is it any more or less risky than a NFZ removal, height removal, etc? :man-shrugging::skin-tone-2:

[2020-11-14 21:50:10] jcase : yes

[2020-11-14 21:50:32] jcase : as far as resulting in DJI locking down more, absolutely

[2020-11-14 21:50:46] jcase : its also kinda useless

[2020-11-14 21:51:23] jcase : There are now commercial (or soon to be commercial ) tools that can decode OC, and pull location data from that

[2020-11-16 06:20:23] bin4ry : New regular price for [drone-hacks.com](http://drone-hacks.com) 40€ starting today morning.

[2020-11-16 06:21:25] pingspike : @bin4ry any Black Friday deals coming up?

[2020-11-16 06:22:22] bin4ry : :slightly_smiling_face:

[2020-11-22 14:51:19] bigstatus7 : [https://m.dji.com/it/shop/service?from=menu_icon](https://m.dji.com/it/shop/service?from=menu_icon)

[2020-11-23 23:52:59] dronepilot : Any way to downgrade Air from latest to .200 firmware? .100 and .200 firmware has DH boost is it worth?

[2020-11-24 00:19:47] dronepilot : Mavic Air 1*

[2020-11-26 06:32:30] bin4ry : check out our Blackfriday deal: <https://drone-hacks.com>

[2020-11-26 13:52:52] bin4ry : New firmware for Mavic 2 Enterprise/Dual (01.01.0800). FCC mod supported now already :slightly_smiling_face: Very quickly after the firmware release (<https://drone-hacks.com>)

[2020-11-26 14:01:31] d95gas : :+1: top work from Bin4ry

[2020-11-26 14:03:18] bin4ry : thanks and thanks to @fstephan1 for testing :slightly_smiling_face:

[2020-11-26 19:52:08] oakley75 : Nice deal, thanks @bin4ry

[2020-11-30 10:09:03] elintnl : Gents, I bought a MM2 , what I like is that Drone-hacks could make it happen to change the RTH speed from 10.5 m/s to higher maybe 16 m/s ?. Also I can't waiting to get FCC or boost on this one.

[2020-11-30 18:30:49] heresmydron : why do you want to speed up RTH

[2020-11-30 20:27:54] originaldobo007 : Personally I think speeding up RTH is great - especially on the P4 series. no reason for it to go 22mph back. On the P4P4v2 it unfortunately can't be done as that is a hidden parameter now.

[2020-11-30 21:29:21] heresmydron : just wanted to know why, i barely use RTH. actually i never trigger it, it just triggers automatically when i fly to far.

[2020-12-01 05:40:01] bin4ry : not sure out of my head if the mm2 has this but the parameter would be g_config_go_home_gohome_idle_vel

[2020-12-01 07:40:55] elintnl : Due to stronger winds when lost connection, the drone can fight better against the wind in RTH. Now it's about 37 km/hour. Would be nice if there is a possibility to increase the speed a little bit more

[2020-12-01 09:20:01] kilrah : it doesn't :disappointed:

[2020-12-01 19:04:01] quad808 : MM2 on the way to add to my collection!

[2020-12-01 20:05:01] pingspike : it’s a cracking little drone

[2020-12-01 21:36:17] kilrah : yup it's awesome

[2020-12-01 22:30:59] heresmydron : ohhh good point

[2020-12-02 01:07:25] mel69hash : What that suze and performance, it is and awesome drone.

[2020-12-02 07:54:19] elintnl : I notice, the parameters are all hidden:sob:

[2020-12-06 23:25:58] poopnondji : Does DH support downgrading fw on MA2? I've downgraded mine a couple times, but seen a few others saying that you can't downgrade.

[2020-12-06 23:33:51] jcase : downgrade depends on the value writte nto rpmb

[2020-12-06 23:33:55] jcase : some firmwraes increment it

[2020-12-06 23:33:56] jcase : some dont

[2020-12-06 23:59:32] poopnondji : Just thought it was strange seeing others in the fb group saying you can't downgrade mavic air 2 fw with DH when I've did it myself a couple times using the Linux and windows versions.

[2020-12-07 00:14:09] jcase : @vdub804 probably depends what firmware you are on, and what you are going to

[2020-12-07 05:10:19] bin4ry : @vdub804 like @jcase said. It all depends on antirollback value. look into ddd and see the ARB values, as long as the ARB is the same you can flash between the versions. once this value is incremented by DJI, you cannot downgrade anymore without an exploit! Currently all firmwares of MA2 have the same ARB value, so downgrading is no problem at all! Which fb groups post this nonsense? Could you maybe correct this false statements inside the groups?

[2020-12-07 12:04:23] pingspike : FB groups ftw :face_with_rolling_eyes:

[2020-12-11 19:42:43] dronepilot :

[2020-12-11 19:42:45] dronepilot : Any chance on repairing this P4S firmware. A friend did upgrade using assistant and the firmware shows like this now and doesn’t let a new firmware to flash.

[2020-12-11 19:44:57] dronepilot :

[2020-12-11 19:45:14] dronepilot : It stays forever like this and nothing happens.

[2020-12-11 19:57:48] dronepilot : Any way to enter recovery mode on this Phantom 4 Standard?

[2020-12-11 21:24:31] jcase : @rgf8aerial why do you want to do that?

[2020-12-11 21:24:51] jcase : getting into it isnt hard, getting out is the issue lol

[2020-12-11 21:26:52] dronepilot : It doesn’t let me take off and doesn’t let me upgrade the firmware. @jcase

[2020-12-11 21:27:15] jcase : entering recoveyr mode wont fix that

[2020-12-11 21:32:46] dronepilot : Any help @jcase on how to fix this?

[2020-12-11 21:32:55] jcase : that i dont have

[2020-12-11 21:33:29] dronepilot : Ahhhhh : (

[2020-12-11 22:21:06] quad808 : what happens when you use Assistant?

[2020-12-11 22:21:26] quad808 : Or the DJI GO app?

[2020-12-11 22:26:55] quad808 : @jcase couldn't you root to drone, then copy over the current firmwares cfg.sig to the firmware backup .dir, then restart drone, connect to assistant and see if assistant will now flash it? I don't have a P4 Standard....

[2020-12-11 22:27:34] jcase : me, i would write /data and /cache boot it a couple times, then reflash it

[2020-12-11 22:27:45] jcase : but im not willing to direct someone else to do that

[2020-12-11 22:27:56] quad808 : yep, gotcha

[2020-12-11 22:28:02] jcase : i have a standard, but i havent really messed with it

[2020-12-11 22:28:09] jcase : im making assumptions on what i would do

[2020-12-11 22:28:18] quad808 : LOL, me too

[2020-12-11 22:29:54] quad808 : @rgf8aerial when using drone-hacks, does the firmware get sent to the drone even? Just won't start the flash process?

[2020-12-11 22:32:52] dronepilot : @quad808 it doesn’t send : (

[2020-12-11 22:33:20] kilrah : Does the drone fly?

[2020-12-11 23:14:49] dronepilot : It doesn’t fly anymore. Shows cannot take off.

[2020-12-11 23:42:20] fstephan1 : Try DJI customer service, tell them the regular update kill your P4 , DJI can install the firmware using the JTAG connector.

[2020-12-11 23:44:52] jcase : huh

[2020-12-11 23:44:58] jcase : p4standard has jtag enabled?

[2020-12-12 01:14:50] dronepilot : I will try dji CS @fstephan1. Thanks

[2020-12-12 06:55:48] 007 : RGF I have that issue and I try everything but nothing work on my p4p even assistant, still stay on F/W 000000. After dji service work on my dron thay change the 3in 1 part. Now it on the firmware and can be change.

[2020-12-12 09:49:42] dronepilot : Thanks @shacharmilo i will give back to my friend the drone and tell him to send in for repair. Unfortunately in Brazil there are no DJI the only way out is to ship overseas.

[2020-12-12 09:56:48] kilrah : maybe you can buy a board on ebay?

[2020-12-12 10:29:55] dronepilot : That’s an option

[2020-12-12 12:48:05] fredmicrowave : Have you tried Dumldore? When I had problem with my MP1 at some point it failed constantly at "uploading firmware", and switching to it helped. Activating temporary root also seemed to dos something.

[2020-12-12 23:03:36] fstephan1 : Most of the microcontroller chips has jtag pins, Needed for installing the firmware first time.

[2020-12-12 23:24:21] jcase : @fstephan1 iirc most DJIs blow a jtag enable fuse after initial flash

[2020-12-13 00:31:38] dronepilot : I did try dumldore it doesn’t upload the firmware. Really sad that this happened

[2020-12-13 05:48:07] bin4ry : try to adb into it

[2020-12-13 05:48:20] bin4ry : with dumldore

[2020-12-13 05:48:56] bin4ry : if that is possible we can go from there

[2020-12-13 10:49:42] dronepilot :

[2020-12-13 10:49:48] dronepilot : Trying to ADB : (

[2020-12-15 11:58:43] cadbob : Shut down everything, Take SD Card out of Bird Fire it up and try it!

[2020-12-16 10:10:26] dronepilot : What sd card @cadbob?

[2020-12-17 00:22:30] cadbob : The Micro SD your pictures go to in Phantom, mine would not flash without 1st removing the memory card

[2020-12-17 00:23:25] cadbob : I dont know why that it being in the AC would prevent it from flashing but it did

[2020-12-17 00:46:30] dronepilot : I will give a try, problem is that mine doesn’t show the firmware version. Got stuck at assistant wile upgrading a stock firmware.

[2020-12-17 12:30:05] bin4ry : @channel FUCK 2020, we are celebrating the end of the year and offer you a special deal. 30% discount with the coupon code *FCK2020* ! Only valid until *1. January 2021*! (CET). Make sure to enter the code yourself during checkout! We cannot apply it afterwards! Feel free to spread the word :wink:

[2020-12-17 12:30:41] flymymavic : will spread it round mate, nice code name :joy:

[2020-12-17 12:32:30] kilrah : lol

[2020-12-17 12:34:55] bin4ry : :laughing:

[2020-12-17 13:10:26] trulala69 : Any updates on Mini 2? I would buy (another) license, if there would be FCC for example :blush:

[2020-12-17 13:34:51] bin4ry : when we have news there will be a post :wink:

[2020-12-17 13:47:15] trulala69 : Of course :+1:

[2020-12-17 17:45:27] quad808 : LOL....hahahahaha...Wish I thought of that coupon code!

[2020-12-22 15:00:15] bin4ry : New release 1.13 :slightly_smiling_face: 22. December 2020 - v1.13: Several minor bugfixes Added textbox to directly edit parameter value in advanced parameter editor Added flashing and parameter support for Mini2 Various fixes in the USB implementation, this should speed up flashing for several drones Some MAC foldername issues should be fixed

[2020-12-22 15:05:55] kilrah : set the channel topic: DroneHacks homepage: Up | Support: Up | Latest Version: 1.13 |

[2020-12-22 15:09:29] bin4ry : if you guts find any new bugs please report :wink: i still have lot on my todo, but the usb fixes did eat the most of the time. also as you know the drone firmware support is not related to the app versioning (Except for cases like the mini2 support, which caused trouble without app patching), so this is going on in parallel :smile:

[2020-12-23 11:17:17] bin4ry : New small bugfix release 1.14: Fixed small issue where the parameter value textbox did not accept values properly (thx @flymymavic for reporting) Increased Win7 compatibility (for 1 user who reported problems, i hope this works :slightly_smiling_face: )

[2020-12-23 18:32:21] fstephan1 : set the channel topic: DroneHacks homepage: Up | Support: Up | Latest Version: 1.14

[2020-12-29 16:33:37] d95gas : @cs2000 Thanks :thumbsup:

[2020-12-29 17:16:31] d95gas : @bin4ry Just checking how long Cutom FC should take on MP 1 with latest firmware? Did it through the wizard, log window shows: Flashing CustomFC and then Stat Flashing now. The green bar is just going left to right on the screen, and been doing it for about 4 mins or so now?

[2020-12-29 17:18:43] quad808 : It should take about 5 mins tops. Check the lights on the drone. Did they change in flashing to show that the drone is actually flashing? Turn on your RC....if it connects to the drone, it's not flashing anymore. Turn off drone, then turn on and re-connect to drone-hacks. Check the status box, top left.

[2020-12-29 17:19:56] quad808 : If success, you will see customFC under FC version

[2020-12-29 17:20:06] d95gas : No there was no change to the lights on the MP, 2 Front are continuous red, and the rear is its usual flashing

[2020-12-29 17:21:14] quad808 : check with turning on the RC to make sure it connects, then safe to start over. Make sure no anti-virus or firewall programs running. Also, do you have DJI Assistant installed for the Mavic Pro?

[2020-12-29 17:21:53] quad808 : PM me and I can walk you through it

[2020-12-29 17:21:58] d95gas : Yep Assistant is installed

[2020-12-29 17:22:05] d95gas : RC seems to connect to it

[2020-12-29 17:32:21] quad808 : all good with customFC for @d95gas Turned off windows firewall, eazy-peazy success!

[2021-01-03 11:16:32] juzzmayer : Are there any hacks for the mavic air 2 on the way?

[2021-01-03 12:04:26] fstephan1 : DroneHack work on this...

[2021-01-03 12:08:26] juzzmayer : If you need a beta-tester for the Air 2 just let me know

[2021-01-03 13:05:36] bin4ry : @juzzmayer when there is something then i will announce it. the mavic air 2 currently can only be flashed or the parameters can be edited. so what knarfboy said is not fully true, dronehacks works on the mavic air 2! but there are no fcc mod or nfz mod yet. we are working on hacking it, when there is news they will be published immediately:)

[2021-01-03 15:27:56] dronepilot : Non dji battery = 2 or 3 parameter value? Forgot this value. Thanks

[2021-01-03 15:33:04] edo : • type 1 : DEFAULT, the ESC firmware is waiting for a genuine DJI batt including authentication. In this mode everything is checked by the firmware and the low batt (15%) and extreme low batt (5%) monitoring are performed. • type 0 : is the most basic monitoring of the battery. No red warning in case of low batt, no emergency landing. • type 2 a 3 perform a less basic monitoring of the battery. Both will display in red the % of charge when it comes under the low batt value. And an annoying but useful two tones bip is played • type 2, in addition to type 3, will ask the battery BMS for an estimated remaining capacity and based on the full charge capacity will display an estimated remaining flight time on the top right corner of the screen.

[2021-01-03 15:49:33] dronepilot : Thanks @edo so either type 2 or 3 doesn’t have autolanding as well?

[2021-01-03 15:55:18] edo : on MM I successfully tested 0. 2 or 3 without guarantee. (I haven't tested)

[2021-01-04 23:29:36] dronepilot : I’m going to modify a brand new P4 V2.0 later today. Question should i purchase regular license? DH still offers the discount code? Thanks

[2021-01-04 23:40:17] quad808 : Hello, sorry, discount was until the 1st. You will need a regular license to unlock downgrading and customFC...which is what you want!

[2021-01-05 01:18:49] dronepilot : I will need to downgrade the firmware and add a customFC? I’m going to do this in a few moment. @quad808

[2021-01-05 01:19:56] dronepilot : I will downgrade to what firmware? Will it be self explaining while doing?

[2021-01-05 01:23:38] quad808 : No, no downgrade if you don't need to. A regular license makes this possible only if needed. Be on 01.00.5200. Then run the customFC hack. Or use the wizard....Drone-hacks is extremely easy to use. Videos on how to's are on our site: <https://drone-hacks.com/videos>

[2021-01-05 01:30:13] dronepilot : Nice I’m on .5200 will give a try

[2021-01-05 01:31:56] quad808 : Perfect! Make sure you have DJI Assistant installed and that it can detect your drone...Drone-Hacks uses the same DJI device drivers. Then if DJI Assistant detects your drone...close it. Then run Drone-Hacks, and hack away after assigning the license to the P4P 2.0. Will be on for a while here, so any problems, let me know.

[2021-01-05 01:32:33] quad808 : Make sure you allow Drone-Hacks through any firewall and or anti-virus software too.

[2021-01-05 01:37:32] dronepilot : Perfect will keep informed.

[2021-01-05 01:39:17] quad808 : Send me a PM of what Drone-Hacks shows, top left info - before and after running the customFC hack...or post here, but blank out your serial number.

[2021-01-05 01:45:34] dronepilot :

[2021-01-05 01:46:23] dronepilot : License purchase, 10 minutes to start. Should I update the DH software?

[2021-01-05 01:57:01] quad808 : Just download from the website. Latest version.

[2021-01-05 02:03:49] dronepilot : Starting now.

[2021-01-05 02:13:11] quad808 : Easy right @rgf8aerial?

[2021-01-05 02:14:02] quad808 : Make sure you ALWAYS restart your drone after any changes are made. Then good to go!!

[2021-01-05 02:39:52] dronepilot :

[2021-01-05 02:40:49] dronepilot : Brand new P4P V2.0, never flown, will make some difference now. Thanks for all of your support @quad808

[2021-01-05 02:41:02] quad808 : Welcome to F R E E D O M from DJI! Glad to help!

[2021-01-05 02:42:08] dronepilot : Hell yes this is what we need FREEDOM : )

[2021-01-05 02:52:16] dronepilot :

[2021-01-05 02:57:12] dronepilot :

[2021-01-05 08:26:19] edo : I'm afraid it was possible to change on the MM firmware .400. This is not yet possible on the Mini 2.

[2021-01-06 18:05:17] bin4ry : @channel if you are a mini / mini 2 owner from india (only from india) with the 15m altitude restrictions enforced, please contact me via pm!

[2021-01-06 18:07:15] pingspike : publicly... because we're all **really** curious now :wink:

[2021-01-06 18:18:00] quad808 : :thinking_face: :exploding_head: :open_mouth: :hugging_face:

[2021-01-07 16:24:46] amanita : Hi. I have a mavic 2 zoom with Aircraft Firmware: v01.00.0670 can i rollback in v01.00.0510 with Drone Hacks? @bin4ry

[2021-01-07 16:25:42] bin4ry : you can rollback this version even with dumldore, 670 and 510 have the same antirollback value

[2021-01-07 16:26:25] amanita : Thanks Andreas!

[2021-01-07 22:14:01] asdrubale : Dear all some people can have idea of parameter go_home_current ? i just try to put all dji consumer drone in a bar chart

[2021-01-08 08:19:01] edo : My idea is that, this is the limit of the maximum current during "go home" in mA. My opinion is - this limit is applied under raw conditions - strong opposite wind, etc. I will just add: MM .0300 firmware = 9000 (without proppeler cover), 18000 (with proppeler cover)

[2021-01-09 07:38:28] asdrubale : Thanks i will add other case , like you suggest mm .0300

[2021-01-19 16:31:37] fun.day.cool : You got this :)

[2021-01-20 21:08:44] wilsondonakanty07 : I'm not able to send you a PM.. could you send a pm to me..?? So that we can discuss if there is a way to bypass the 15m limit

[2021-01-21 05:36:21] bin4ry : my pms are open i don’t think they can be closed here ;) anyway thanks for the offer i tested my approach an sadly it didn’t work out! if i have a new idea i will let you know!

[2021-01-21 22:24:02] fun.day.cool : Is there a blog area where you guys post your newest mods?

[2021-01-22 00:50:34] fstephan1 : -> <https://drone-hacks.com/blog> or community forum <https://www.kopter-support.de/>

[2021-01-22 11:01:39] cs2000 : Just a note, Koptor-support is not in any way related to Drone-Hacks. TO keep up with the latest news, it is either in here, or the blog linked above.

[2021-01-27 19:07:04] nublish101 : With the custom firmware used on the mpp can I use th latest version of dji god with out getting high limited and shit I know I'll get warnings from the app but not fussed about that not like I'm going to be flyin in nfz's

[2021-01-27 19:23:36] oakley75 : You'll be good. Fly offline. Log into clean install of latest go4 without mpp connected, go offline, connect, then fly. You may be safe online as well idk, never tried.

[2021-01-27 19:32:48] nublish101 : Nice just be having regular crashes with patched android go4

[2021-01-27 19:34:55] nublish101 : Which is a royal pain in the dick when you got a tail wind and doing almost 68-70kmh towards a forest/building/mountain side which have all happened

[2021-01-27 19:35:09] nublish101 : Luckily collision avoidence has save my ass

[2021-01-27 23:45:35] oakley75 : Yeah 4122 has been crashing more on me too. Wonder why

[2021-01-29 10:54:15] bin4ry : We welcome the Autel drones with an APK mod to our site!! check out <https://drone-hacks.com/autel>

[2021-01-29 11:07:57] william.markezana : that is awesome

[2021-01-29 11:08:17] mel69hash : Woo-hoo awesom but my E2P had dived into the ocean. Barely 134m away from home point. It's my error flying in high wind and over confident that it will reach home with the balance battery heading into the wind. Well I paid heavily for that complacency

[2021-01-29 12:26:54] d95gas : @bin4ry Nice work, glad to see things still being developed. Hoping you might have some development on the MM2 before too long :+1:

[2021-01-29 12:30:40] bin4ry : thanks! Autel was on my todo for a loooong time !

[2021-01-29 16:11:12] pingspike : what version of the Autel Explorer app is this @bin4ry ?

[2021-01-29 16:11:37] bin4ry : 10 and 19 both, you can choose which one to build

[2021-01-29 16:15:02] pingspike : oh cool

[2021-01-29 16:15:20] pingspike : is this like the old days of deejayeye-modder? :smile:

[2021-01-29 16:18:21] bin4ry : similar but only 1 hack yet

[2021-01-31 11:15:31] nublish101 : Bim4ry any chance you might look. Into trying to crack more recent version of dji4 app again

[2021-01-31 19:31:54] jcase : @nublish101 the biggest challenge is unpacking the native libraries and removing the need for dexhelper libs

[2021-01-31 19:32:21] jcase : however, that might be been weaked in more recent secneo builds, as newer builds of android would interfere with some of the techniques they used to us

[2021-02-03 12:20:59] nublish101 : That's what I was thinking maybe the case

[2021-02-04 02:54:28] djibot : Is removing NFZ from .300 something that is possible? It currently looks like .100 is the only one on your bird list right now, I would purchase license for it but dropping to .100 isn't worth it for me at the moment, too many other features I use would be lost.

[2021-02-04 04:32:56] bin4ry : no not possible currently sorry

[2021-02-09 16:20:06] dronepilot : Just purchased mini 2 it’s arriving this Saturday. Any way to remove autolanding?

[2021-02-10 02:38:59] dronepilot : Another question firmware downgrade isn’t available at DH on the mini 2, any chance somewhere else?

[2021-02-10 05:08:48] bin4ry : firmware downgrade with exploit is not available, if the antirollback value is the same you can flash whatever you want ;)

[2021-02-10 09:43:52] djibot : Do you plan on doing any Matrice 210 v2 modding? Probably going to purchase one today want nfz and height removed if possible.

[2021-02-10 09:44:57] djibot : Coprersafe says they have it for 200 210 and 600 but they don't say "v2”

[2021-02-10 11:16:23] bin4ry : i have never looked on matrice yet sorry, and time would not allow any promises that i will look soon

[2021-02-14 09:24:12] bin4ry : Valentines Day special (30% OFF) at <https://drone-hacks.com> with the coupon code DH_LOVES_YOU

[2021-02-14 12:25:48] pingspike : we love you too man

[2021-02-14 16:01:51] originaldobo007 : Incredible support from a dedicated team at a good company. You guys rock, DH.

[2021-02-15 03:32:12] dronepilot : Mini 2 Range Test 6km out

[2021-02-17 10:39:14] elintnl : DH_LOVES_YOU, doesn't work when buying licence?

[2021-02-17 10:40:39] validat0r : love's out

[2021-02-17 10:41:57] elintnl : disregard, did it with copy paste, it's working sorry my mistake

[2021-02-17 11:09:02] bin4ry : :laughing: the love coupon still works for the whole week :heart_eyes:

[2021-02-18 16:47:07] quad808 : Guys...we ALWAYS have enough LOVE for all of you!! :hugging_face:

[2021-03-01 19:45:29] dronepilot : Is it worth buying boost for the mini 1 fcc version?

[2021-03-02 11:33:57] elintnl : It double the range!

[2021-03-02 14:54:29] dronepilot : Just did activate boost on the Mini 1, nothing shows up on powering up at the app. How do i no if the boost is enabled or have any effect?

[2021-03-02 14:57:07] bin4ry : @rgf8aerial there is no indicator anymore after DJI Fly 1.1.6 (they removed it)

[2021-03-02 14:57:38] bin4ry : we also have this covered in our faq:

[2021-03-02 14:57:48] bin4ry : <https://drone-hacks.com/faq>

[2021-03-02 15:03:24] dronepilot : But does it still works on latest app boost?

[2021-03-02 15:09:54] dronepilot : I did read the faq at the link, but my device is iOS so no fake gps enabled only DH boost at latest go fly app.

[2021-03-02 15:12:37] bin4ry : fakeGPS is not needed, it tells you that fakeGPS does not work anymore. iOS or Android does not matter. if you have the latest fly app the app will NOT show the message anymore on boost mode. the boost mode still works the boost mode is NOT dependend on the app, it is inside the firmware of the device! It currently is compatible with ALL firmware versions! you can measure it with powermeter :slightly_smiling_face:

[2021-03-02 16:17:08] dronepilot : Thanks Andreas : )

[2021-03-02 16:38:36] bin4ry : you are welcome

[2021-03-04 09:52:04] elintnl : FYI, new firmware mini 2 is out

[2021-03-04 09:52:48] bin4ry : thx for info

[2021-03-09 00:16:15] cloudwerx : Hey @bin4ry how come I see 01.00.0740 listed as FW for Mavic 2 Pro on DH Birdmap? New FW coming out?

[2021-03-09 06:23:10] bin4ry : this firmware is on the drone for some people after repair, not an „official“ firmware.

[2021-03-10 22:58:00] cloudwerx : Ah gotcha tnx

[2021-03-11 02:36:28] fun.day.cool : How far have you guys gotten with the dji fly drones? (ma2,mini 2)

[2021-03-11 16:30:50] bin4ry : We have a big annoucement, we at <https://drone-hacks.com> are expanding our reach to Android! We are happy to announce the release of DHCompanion, an Android Companion APP for your drone. It will allow you to switch **FCC on the Mavic Air, Mavir Air 2, Mini, Mavic Mini2, FPV Racer**. ON THE GO, THROUGH YOUR PHONE! The hack will be temporary on most drones so you will just need the android phone/tablet in reach. Read more about it here: <https://drone-hacks.com/dh-companion> . As this is ONLY covering FCC mode our LITE license will be enought for it to work :slightly_smiling_face:

[2021-03-11 16:33:49] fun.day.cool : Great Work Guys!

[2021-03-11 16:51:35] quad808 : WAHOOOOOO!!!

[2021-03-11 17:02:58] pingspike : :bow::skin-tone-2:

[2021-03-11 17:03:28] pingspike : from a guy living in a CE world, this is excellent news :blush:

[2021-03-11 17:04:01] pingspike : now... about that iOS version :wink:

[2021-03-11 17:04:39] bin4ry : lool

[2021-03-11 20:45:54] kilrah : set the channel topic: DroneHacks homepage: Up | Support: Up | Latest Desktop Version: 1.14 | Latest Android Version: 1.0.1

[2021-03-11 22:36:58] itemcode : Hi! Drone-Hacks FPV racer —> “Now you can launch your flying app and go on your flight…the hack you chose will stay for as long as you don’t use the FLY app.” What flying app ?? :thinking_face:

[2021-03-11 23:13:53] kilrah : the one that goes with it and is called just that? <https://www.dji.com/dji-fly>

[2021-03-12 05:51:05] bin4ry : @itemcode on FPV please do NOT start the Fly app after the hack i have updated the instructions on the Homepage, as soon as you start the Fly app the hack will vanish

[2021-03-12 07:13:38] cat.db : when i use this app, why it doesn't need license？and no effect .

[2021-03-12 07:57:19] bin4ry : @orangeclassmate of course it needs a license ... why do you think it doesnt need a license ? You need to connct the drone and the controller. then connect the controller to the app. after that it will bring you to a login screen, when the login worked you will see the mainscreen where you can do the FCC hack. The FCC hack button will ONLY be clickable when you have a license registered

[2021-03-12 07:59:43] itemcode : @bin4ry Thx, i don,t have the DJI Fly app on my Smart Controller. ;) I downloaded the DHcompanion and installed it on the smartcontroller and it started properly..

[2021-03-12 08:00:43] bin4ry : @itemcode for which device do you use the smartcontroller? i thought you use the FPV Racer? i am a bit confused sorry ^^

[2021-03-12 08:03:46] itemcode : @bin4ry I bought it for the V1 goggles because of the HDMI output. :)

[2021-03-12 08:06:34] kilrah : yeah you can't run fly on the sc, but... well you don't need it anyway

[2021-03-12 08:06:52] kilrah : well you would if you wanted a video out, but...

[2021-03-12 08:08:24] bin4ry : i am more confused now :smile:

[2021-03-12 08:13:50] itemcode : @bin4ry I use it for two things: 1: SC —> V2 Googles Digital Mode —> FPV Live app —> HDMI out. / 2: SC —> V2 googles Drone Mode —> DHCompanion app —> FCC hack. :)

[2021-03-12 08:15:07] bin4ry : Ahhh! now i understand it!

[2021-03-12 08:15:27] bin4ry : once you start the FPV Live app it WILL revert back to your normal region

[2021-03-12 08:17:25] itemcode : @bin4ry Nope, the 1200mW Still works on Digital Mode

[2021-03-12 08:17:47] bin4ry : ah ok! i was speaking of the "racer mode"

[2021-03-12 08:18:06] bin4ry : :smile:

[2021-03-12 09:13:35] kilrah : <https://www.helicomicro.com/2021/03/12/dji-fpv-le-premier-hack-pour-passer-en-mode-fcc/>

[2021-03-12 09:17:20] bin4ry : :smile:

[2021-03-12 09:17:26] bin4ry : but it is euro not dollar

[2021-03-12 09:17:30] bin4ry : :smile:

[2021-03-12 09:17:44] bin4ry : so fred if you read here, thanks :wink:

[2021-03-12 09:20:51] kilrah : yeah it's the auto translation

[2021-03-12 09:21:09] kilrah : which is actually pretty good, but doesn't handle currencies visibly lol

[2021-03-12 09:21:17] bin4ry : yah

[2021-03-12 09:21:27] bin4ry : very strange to translate a currency

[2021-03-12 09:21:32] kilrah : yes :smile:

[2021-03-12 09:21:38] kilrah : it translates comments too, funny

[2021-03-12 09:22:08] bin4ry : hehe

[2021-03-12 11:06:06] cat.db :

[2021-03-12 11:06:26] cat.db : doesn't show login messenge.

[2021-03-12 11:06:50] kilrah : connect device...

[2021-03-12 11:06:57] kilrah : that's what it's asking for

[2021-03-12 11:09:03] cat.db : the drone is power on and connected.

[2021-03-12 11:09:45] kilrah : probably didn't give usb authorization then

[2021-03-12 11:09:50] kilrah : and you don't even say what drone

[2021-03-12 11:09:56] cat.db : give it

[2021-03-12 11:10:02] cat.db : air 2

[2021-03-12 11:10:29] kilrah : connected to bottom port? and nothing connected on top port?

[2021-03-12 11:19:35] bin4ry : connect to BOTTOM port, drone and controller both powered on

[2021-03-12 11:19:58] bin4ry : also if you have microUSB you need an OTG cable

[2021-03-12 11:29:43] pingspike : I've not got a Mini 1 to try this on, but if you're on a CE-hardware model Mini 1

[2021-03-12 11:29:58] pingspike : I'm guessing there's no boost, or other benefit, of this? :thinking_face:

[2021-03-12 11:32:58] kilrah : that's actually a good question

[2021-03-12 11:33:19] kilrah : people have said you could flip the ce model to fcc it seems... <https://mavicpilots.com/threads/how-to-tell-ce-or-fcc.81294/>

[2021-03-12 11:33:25] bin4ry : well the boost mode will stop you from switching to FCC mode

[2021-03-12 11:33:28] bin4ry : so first disable boost mode

[2021-03-12 11:33:31] bin4ry : then switch to FCC

[2021-03-12 11:33:35] bin4ry : then activate boost agian

[2021-03-12 11:33:40] bin4ry : it will give you the most power output

[2021-03-12 11:33:42] bin4ry : both combined

[2021-03-12 11:33:53] kilrah : so the ce model is capable of fcc anyway, maybe lower power?

[2021-03-12 11:33:54] bin4ry : it will NOT be as powerful as the hardware FCC model

[2021-03-12 11:34:01] kilrah : yeah that

[2021-03-12 11:34:03] bin4ry : but the software will rise the power

[2021-03-12 11:34:05] kilrah : but it supports 2.4 too :slightly_smiling_face:

[2021-03-12 11:36:06] bin4ry : correct :wink:

[2021-03-12 11:36:37] pingspike : but as the CE model is lacking the FCC hardware, what is being increased / boosted? :thinking_face:

[2021-03-12 11:37:42] bin4ry : well the hardware still is capable of doing more output than in the CE redion allowed

[2021-03-12 11:37:51] bin4ry : just not as much as in the FCC region allowed

[2021-03-12 11:39:04] pingspike : roger that

[2021-03-12 11:39:23] pingspike : so this companion app is still a worthwhile purchase for CE Mini 1 owners?

[2021-03-12 11:39:38] pingspike : someone asked me this morning, I'm just the middle man here :smile:

[2021-03-12 11:44:13] bin4ry : maybe ask others not me, as the seller here i would always say yes :smile:

[2021-03-12 11:44:26] bin4ry : the companion app is free to use to previous LITE license / Mini users

[2021-03-12 11:44:35] bin4ry : so there should be enough out there to test and report :slightly_smiling_face:

[2021-03-13 18:15:38] heresmydron : @bin4ry Companion app crashes on Samsung A5, log output:

[2021-03-13 18:15:48] heresmydron : ```03-13 18:14:08.055 13156 13171 E AndroidRuntime: Process: com.dronehacks.DHCompanion, PID: 13156 03-13 18:14:08.055 13156 13171 E AndroidRuntime: java.lang.NullPointerException: Attempt to invoke virtual method 'boolean java.lang.String.equals(java.lang.Object)' on a null object reference 03-13 18:14:08.055 13156 13171 E AndroidRuntime: at com.dronehacks.DHCompanion.Companion$g.run(Unknown Source:13) 03-13 18:14:08.055 13156 13171 E AndroidRuntime: at java.lang.Thread.run(Thread.java:764)```

[2021-03-13 18:16:06] heresmydron : fresh install via adb, phone is rooted

[2021-03-13 18:19:05] heresmydron : nvm it doesnt like airplane mode, connecting to my wifi solved the problem!

[2021-03-13 18:56:14] kilrah : needs to connect to servers to log in and check license, so yeah needs connection

[2021-03-14 05:16:41] bin4ry : but thanks for the log! i will take a look to catch that null object reference

[2021-03-14 12:41:32] mail451 : Yeah offline activation would be best.

[2021-03-15 13:24:24] itemcode : @bin4ry What do you think ?

[2021-03-15 13:28:00] itemcode :

[2021-03-15 13:41:03] bin4ry : i don’t care. 1. i don’t do ios. ios needs certificates to install apps so you need a other persons dev cert, which can be revoked at every time by apple. or is tall the app every 7 days. also this is illegal, it is illegal to SELL hacked apps. dji WILL sie anybody who does this 2. i never look what others do, i just do my own thing and do my own hacks and i did it first. i do never compare to others. 3. i released it already :)

[2021-03-15 13:46:30] itemcode : @bin4ry I’m perfectly happy with your solution, It’s just an interesting thing, and i was curious about your opinion on the solution. I’m sorry! :/

[2021-03-15 13:53:21] bin4ry : no need to be sorry, i just answered ;) the only person who will be sorry is this guy if he tries to sell that. DJI sues everybody who sells cracked apps. that is the reason that my old github did not contain any apks and also did not sell anything. i just offered patches not premodded stuff. IF you go and sell an hacked app, then they will sue you to death, the only people who seem to get away with it are the russians.

[2021-03-15 14:03:06] itemcode : @bin4ry Oh, I get it, it’s a pretty dangerous thing! Thank you for your correct answer! :)

[2021-03-15 14:03:43] bin4ry : no worries. :slightly_smiling_face: you are welcome :slightly_smiling_face:

[2021-03-15 16:09:06] micronica : form 620

[2021-03-15 16:10:44] cs2000 : Sorry, i just realised im an idiot! 0620 is ARB#4, 0560, 0500 and 0300 is ARB#3

[2021-03-15 16:10:58] cs2000 : so yeah, no downgrade available from any client currently :disappointed:

[2021-03-15 16:11:12] micronica : thats why i asking because i rember on 620 i cat rolleback like on mavic 2 pro

[2021-03-15 16:11:57] cs2000 : Yeah, sorry i was reading things wrong on my end. As the DH window says, needs an exploit, which isnt currently available, meaning sadly you're stuck

[2021-03-16 00:38:00] dronepilot : Air 2 no DH software boost or fcc? Only app?

[2021-03-16 03:06:15] gregw : Trying to do the FCC hack for my Mini 2, and was just wondering if I'm doing it correctly.. 1. Boot up Mini 2, then controller, then connect the bottom USB C on controller to USB C on phone.. 2. Start DH app, login, click on 'Enable FCC', then close the DH app completely. 3. Connect the top USB C on controller to USB C on the phone, and start the DJI Fly app to start flying... I assume that I'll need to re-do this every time I change battery on the drone and restart it.. Correct?

[2021-03-16 11:03:19] itemcode : @bin4ry Hi, Can I configure the fpv drone parameters with the desktop app ? Thx! :)

[2021-03-16 11:05:56] kilrah : yes

[2021-03-16 11:07:27] itemcode : @kilrah Thx for the quick reply! :)

[2021-03-16 11:08:35] kilrah : it's mentioned on the website page...

[2021-03-16 12:08:53] elintnl : it's released I see pfff

[2021-03-16 12:08:57] elintnl : <https://gb160.github.io/info.html>

[2021-03-16 12:23:29] bin4ry : are you the author? was that available before drone-hacks? if so then very nice :slightly_smiling_face: like i said, i do not look for others. ^^ does it include FPV ?

[2021-03-16 12:27:22] bin4ry : Appsigning the users must do it themselves to get it installed at all. Only allowed to use it 12 month Cannot be used on multiple devices phones/tablet whatever the appsinging thing is the reason i do not do any iOS related stuff, very annoying. but that's enough. like i said, i usually don't look what others do, but if one mentions me directly i am allowed a peek i think :wink:

[2021-03-16 12:32:04] bin4ry : and now enough of others. inside this channel here! if that is your project you are more than welcome to open an own channel for that :slightly_smiling_face:

[2021-03-17 00:23:20] djibot.5150 : Will dronehacks support Matrice 200 v2 in the future?

[2021-03-18 10:38:25] bin4ry : i am thinking how to solve this. the problem is not to include a grace period but to include it in a safe way.

[2021-03-19 17:13:52] cloudwerx : Any current promos goin on for DH M1P Licenses @bin4ry ?

[2021-03-19 17:42:03] bin4ry : @tylerpublic you should check with our partners at <https://drone-hacks.com/partners> Some of them have promos going on :wink:

[2021-03-19 17:42:39] cloudwerx : Ok thank ya sir! :ok_hand:

[2021-03-19 19:00:24] pingspike : I hear that Grey Arrows one is pretty cool :blush:

[2021-03-19 19:51:11] itemcode : @bin4ry Hi! What exactly does this mean? “Geounlock with Fly app PRIOR FCC hack is now possible!)”

[2021-03-19 19:51:20] itemcode : Thanks for the reply!

[2021-03-20 05:23:40] bin4ry : @itemcode imagine there is a geozone with self unlock. then you need to start the dji fly app to self unlock. you can now do that before you hack fcc and the drone will remember that self unlock for this flight like it was intended.

[2021-03-20 08:49:14] bin4ry : Update for Autel APK hack for 1.1.7.38 ist on the homepage :)

[2021-03-20 10:16:30] itemcode : @bin4ry oh, I get it, thanks for the explanation! :i_love_you_hand_sign:

[2021-03-20 11:50:33] mainframe : What is the gut feeling so far with Evo2 - is FCC mode switching doable in the future?

[2021-03-20 11:51:30] bin4ry : cannot tell. i would need time to work on evo firmware, but my main time goes for dji, because it does not seem many people are interested in evo 2 from us.

[2021-03-23 17:00:36] dronepilot : M2 and Air 2 has better range using 2.4ghz only. Any one have tested out?

[2021-03-23 20:44:46] heresmydron : in theory channel 1 of 2.4 is the strongest one, at least according to bin4ry and others... in practice i always had better results with 5.8 but i usually fly in city-like environments

[2021-03-23 21:21:52] dronepilot : I’m flying allot over city, been testing 2.4ghz until now all positive feedback. Did some decent range out 2.4ghz auto.

[2021-03-23 21:47:55] kilrah : in CE 2.4 should be a bit better provided the RF environment is clean, in FCC 5.8 is probably always better

[2021-03-23 21:51:37] tobimimer : Waiting for the permanent boost mode on DJI Mini 2 ;)

[2021-03-24 10:05:13] dronepilot : The M2 have fcc boost applied, working strong on 2.4ghz CE area.

[2021-03-24 10:06:07] dronepilot : I’m waiting on the air 2 hardware boost

[2021-03-27 00:10:56] dronepilot : Anyone tested SC with Air 2? Any range issues noticed?

[2021-03-27 08:58:32] heresmydron : SC?

[2021-03-27 09:01:18] bin4ry : smartcontroller

[2021-03-27 09:01:27] bin4ry : SC does not support the DHCompanion app

[2021-03-27 09:01:45] bin4ry : therefore it cannot be used for Air2 together with the fcc hack

[2021-03-27 10:19:43] dronepilot : Any hardware boost for the MA2 Andreas?

[2021-03-29 08:23:20] elintnl : @bin4ry fyi <https://dji.retroroms.info/howto/drone-hacks>, link to homepage drone-hacks is not working, cheers Jos

[2021-03-29 08:25:01] bin4ry : thanks, fixed

[2021-03-30 04:22:23] bin4ry : only FCC via Android

[2021-03-31 13:06:48] almog.baku : Hey, Is it safe to do fw update?

[2021-03-31 14:03:33] bin4ry : which drone

[2021-03-31 14:03:54] bin4ry : if in doubt check our birdmap, it shows all compatible firmware versions

[2021-04-02 00:39:09] dronepilot : Remove autolanding battery type 0,2,3 forgot what each value dose can someone please refresh this out.

[2021-04-02 07:21:31] heresmydron : 0

[2021-04-02 10:09:31] djibot.5150 : Is removing nfz on Mavic 2 pro / zoom for firmware newer than .100 looking good yet? No one talks about any progress updates that I have seen. Is it being worked on still or forgotten?

[2021-04-04 06:26:06] bin4ry : nothing is forgotten, it is just not possible currently.

[2021-04-04 13:39:09] dronepilot : @heresmydron thanks did some testing this weekend battery type. 0 = no autolanding, no beeping, with time remaining bar 1= standard 2= no autolanding, beeping, % battery on time bar 3= no autolanding, beeping, with time remaining bar

[2021-04-04 13:41:21] dronepilot : This where was my testing with M2P + SC + DH Boost = 11.200 meters out, landed safely. Awesome flight.

[2021-04-04 13:49:54] dronepilot : Also did some firmware testing on the M2 from .300 to .670 all them with DH boost. The best link quality and stable firmware for me is .300. Did some dji goggles testing as well directly link 6.000 meters out and the simply gets disconnected doesn’t matter standard rc and smart controller.

[2021-04-04 17:01:22] validat0r : Nice lawn chair

[2021-04-04 17:09:08] validat0r : Did your try 4?

[2021-04-04 17:59:33] tobimimer : Cool

[2021-04-04 19:18:05] dronepilot : @ilovemynexus4 thanks the chair is awesome for LR flights. Yes i did try .400, .500 and 670 the best result was on .300. I did have a M2 running on .100 fw but unfortunately i did update by mistake.

[2021-04-04 19:18:33] dronepilot : @tobimimer thanks :v::skin-tone-2:

[2021-04-04 19:25:10] oakley75 : He may have meant battery type 4

[2021-04-04 19:43:28] validat0r : I did .. I didn't even know 3 was a thing ..

[2021-04-05 07:50:07] heresmydron : nice, good testing, i think ill keep mine in 0

[2021-04-05 10:53:04] dronepilot : Nice @reoak battery type 4 nothing changes.

[2021-04-05 10:54:50] dronepilot : Yes @ilovemynexus4 type 3 is my sweat spot, lowered the warning beep to 10%.

[2021-04-06 20:44:12] tobimimer : Lately I am having trouble connecting my Mini 2 to DH. I managed to connect it once and never was able to do it again even tho I did not change anything that time. I don't remember exactly how I did it. Can someone give me a quick guide to connect the Mini 2 properly to my laptop?

[2021-04-06 22:33:32] kilrah : disconnect and power off aircraft, launch DH, power up the mini, wait until it does the startup sounds and connect usb

[2021-04-06 23:51:11] mel69hash : Connect within the 20 second it started. After that it'll block of I suppose.

[2021-04-08 18:40:00] dronepilot : Any way to download older DH version? I’m trying to save parameters value but at reboot it doesn’t save.

[2021-04-09 04:03:26] bin4ry : change the number in the download link they are still on the server. but if the parameter doesn’t save it also could be just a hardcoded parameter which doesn’t allow changes

[2021-04-09 11:26:50] dronepilot : I don’t think the parameter I’m trying to edit is hardcoded it’s battery type on a M2 bird at DH it reverts I can edit at assistant 2 debug.

[2021-04-09 11:28:58] dronepilot : Missing some air 2 DH love :face_with_hand_over_mouth:

[2021-04-09 13:40:30] bin4ry : i cannot reconstruct this problem . are you pushing the „write to drone“ button? air 2 should work already too for some time

[2021-04-09 13:58:14] dronepilot : Yes im pushing the write button.

[2021-04-09 13:58:54] dronepilot : When power on again the parameter that i changed isnt saved.

[2021-04-09 13:59:51] dronepilot : about the air 2 is boost coming out?

[2021-04-09 20:45:26] bin4ry : are you using windows or mac? no problems here on windows or linux.

[2021-04-09 23:17:18] kilrah : i've had issues with value edits as well, the stuff i reported, you fixed long ago but since there hasn't been a release since it's still broken on public app AFAIK

[2021-04-10 05:25:48] bin4ry : @kilrah 1.14 should have included the fixes from the stuff you reported i think. or did i mix it up? anyway there will be 1.15 . just want to make sure that there is everything proper then

[2021-04-10 14:57:58] dronepilot : I’m using windows @bin4ry, have Mac here also. Long time ago did download the beta version but didn’t work well.

[2021-04-11 19:00:59] dronepilot : @bin4ry how can i download older DH version?

[2021-04-12 04:39:31] bin4ry : like i said before, change the version number in the download link to an older version

[2021-04-12 12:13:10] konradhohentanner : Is there any news regarding the Matrice 600 Pro? It seems like ftp is disabled on the drone, is that the main issue why an exploit is difficult?

[2021-04-12 12:18:33] djibot.5150 : A few sites sell NFZ for Matrice, all the them remotely done, I couldn't find anything searching for Matrice, at all, and that weird because they aren't even new. Would be nice if dronehacks or nolimitdronez offered support.

[2021-04-12 12:22:43] konradhohentanner : Has anyone managed to get a look at the firmware/root filesystem? The image on dankdronedownloader is 3 MB and only contains some parameter config if i see correctly.

[2021-04-12 14:01:43] bin4ry : i don’t have this drone so it’s hard for me to test/work on it . that’s the reason ;)

[2021-04-13 05:29:25] digdat0 : M600 has similar firmware as others, you can use current tools to extract firmware and mod parameters. The trick is installing the modded file, these steps should work ... [https://dji.retroroms.info/howto/install_modded_m100_m600_fw](https://dji.retroroms.info/howto/install_modded_m100_m600_fw)

[2021-04-15 16:55:41] djibot.5150 : Thank you, not sure how I missed M100-600 on retroroms. Although may not work for v2, assistant from page won't pick up my aircraft. Bummer.

[2021-04-16 06:51:45] oakley75 : @bin4ry curious, on your app, any reason you recommend ma2 firmware 340 over 460?

[2021-04-16 06:52:24] bin4ry : because this firmware has a antirollback bump

[2021-04-16 06:52:37] bin4ry : and nobody can forsee the future. so it is just safer to stay lower in that case

[2021-04-16 06:53:05] oakley75 : It appears that 460 is the last arb 1 actually

[2021-04-16 06:53:51] oakley75 : Just a friendly fyi

[2021-04-16 06:55:40] heresmydron : 250 is the best one for me, its the last firmware that allows battery type 0

[2021-04-16 06:57:02] oakley75 : Dangit forgot about that. Good point. Was just on 130 went to 460 since all same arb, but 250 it is :grin:

[2021-04-16 07:18:26] bin4ry : ah ok! the reason might be a combination of arb and available paramters then

[2021-04-16 07:18:39] bin4ry : i do not keep track of the reasons actually, just decide on the go an stick to it. lol

[2021-04-16 20:56:42] horrible.programmer.e : yo guys is the Ocusync 2.0 specification proprietary?

[2021-04-17 05:21:39] bin4ry : yes

[2021-04-17 15:13:02] dronepilot : @heresmydron wished i could downgrade my A2 back to .250 firmware. I did upgrade to the latest firmware accidentally :face_with_symbols_on_mouth:

[2021-04-19 02:29:38] carvalhosalaz : Hey all, do the leaked keys for MM1/MM2 open possibilities for new hacks for those birds? (looking at altitude limit removal so I can fly to the top of a mountain nearby)

[2021-04-19 04:37:38] bin4ry : no sorry. it does allow to decrypt the firmware. but i had access to the firmware already.

[2021-04-19 06:29:46] kilrah : Height limit on the FPV is annoying, you get there VERY quick when mountain riding :smile:

[2021-04-19 14:47:18] carvalhosalaz : @bin4ry Any way to bypass the altitude limit from what you've been able to gather? Any way to reset it mid-flight? Finally any way to trick the barometer, to maybe let's say takeoff with an offset height reading? I am unable to reach the mountain top by a mere 30 meters.

[2021-04-19 14:48:16] bin4ry : no sorry. currently no idea except a proper FC hack

[2021-04-19 14:48:48] carvalhosalaz : Gotcha, thanks for the response :+1:

[2021-04-19 14:54:23] fredmicrowave : Since height limit don't allow to fully fly your drone legally, it should be illegal.

[2021-04-19 19:47:33] tsun : by the same logic you should ban NFZ removal as well

[2021-04-19 19:47:36] tsun : and FCC mode hacks

[2021-04-19 19:48:09] tsun : or DH/NLD in general, as in some countries modding drones is not allowed at all

[2021-04-19 19:51:10] tsun : plus limit range to around 500m, to ensure that everyone flies in VLOS

[2021-04-19 19:59:20] kilrah : he said the opposite

[2021-04-19 19:59:44] kilrah : "it should be illegal for dji to put restrictions"

[2021-04-19 20:37:41] tsun : sorry then, my bad :wink:

[2021-04-19 23:01:27] dronepilot : Any where soon fcc boost for air 2?

[2021-04-20 04:44:56] bin4ry : i didn’t see any boost in the air 2 firmware, i could be wrong but i think boost is not available on new drones anymore. so you need to live with fcc [https://drone-hacks.com/dh-companion](https://drone-hacks.com/dh-companion)

[2021-04-20 04:45:54] bin4ry : @rgf8aerial ^

[2021-04-20 04:50:27] bin4ry : i hope that answeres your question. There is fcc mod already for a longer time for Air 2, also for Air 1, Mini1, Mini2 and FPV :wink: all with the DH-Companion

[2021-04-20 11:16:11] dronepilot : Understand @bin4ry this only works with android I’m an iOS user.

[2021-04-20 11:22:51] bin4ry : time to get an android device then :wink:

[2021-04-20 16:03:01] dronepilot : I’m thinking about this, probably a Motorola Fusion for the budget since i just got a 12 pro max recently. I used to have a note 10 plus but had some bad experience with the screen brightness.

[2021-04-20 17:25:06] oakley75 : Proper used N950U is super bright and cheap

[2021-04-20 17:27:34] oakley75 : Fyi ATT versions don't block multiple user accounts on phone, so one can setup a profile for online apps, another being offline etc.

[2021-04-20 17:28:19] oakley75 : That being said, Motorola is my fav due to price and openness.

[2021-04-23 05:14:24] itemcode : @bin4ry Hi! I want to set the parameters in air2s, do you have a plan for this? :) Thx!

[2021-04-23 05:49:24] bin4ry : yes

[2021-04-26 03:47:39] oakley75 : After flashing four MP1 batteries with .03.0400, why would two of them end the flashing process with double (back2back) reboots everytime, but single reboots on the other two batteries? Very similar batteries w similar manufactured dates. Flashed all batteries many times as test. All complete the flashing stage 2 within 4 minutes, so there's no installation hangup happening.

[2021-04-26 04:33:39] bin4ry : strange, but honestly i have no idea. i never looked at batteries at all, maybe some battery guru can answer that

[2021-04-26 08:56:40] bin4ry : DH-Companion 1.0.5 released. Dji Air 2 S support ! Take care now the TOP port of the new controllers must be used :slightly_smiling_face: So the app is much easier to use now :smile: <https://drone-hacks.com/dh-companion>

[2021-04-26 10:13:18] elintnl : Thanks, updating.....

[2021-04-26 13:36:18] oakley75 : Yeah it seems to indicate something with the firmware installation... not sure what. Never seen that behavior before.

[2021-04-29 23:05:31] jefdrones : <https://datasheetspdf.com/pdf-file/1250040/NATER/AR1021X-ITM-UB20-S15PXX0000NV2/1>

[2021-05-06 06:23:35] nublish101 : What are the chances if buying a brand new mavic 2 pro of it having a firmware version lower the 01.00.0100

[2021-05-06 06:43:09] bin4ry : the firmware was released in october 2018. so you are searching for a unit produced earlier than that. you can take a look at the serialnmber of the drone.

[2021-05-06 06:44:06] bin4ry : the serialnumber is structured like this. So with this info you should be able to find out which serialnumber to look for :wink: ```def decodeDjiSerial(serial): montharr = ["January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December"] device = device_from_snprefix(serial[0:3]) year = int(serial[4], 36) + 2003 month = montharr[int(serial[5], 36) - 1] day = int(serial[6], 36) if day >= 19: day = day -1 if day >= 24: day = day -1 return device, year, month, day```

[2021-05-06 06:44:09] nublish101 : I'm buying brand new ifnim gunna buy one I no there are way to possibly jtag the firmware down

[2021-05-06 06:44:53] nublish101 : But the only person I have that offers that service is nld I'd rsther just do it my self

[2021-05-06 06:45:58] nublish101 : Only reason I'm thinking bout it is my insurance ran out a month ago and I haven renewed it yet and my mavic 1 took a few days ig crash last night

[2021-05-06 06:46:27] nublish101 : Both fron legs are fucked one competely. Snapped of but the circuit board in it is miraculously okay

[2021-05-06 06:46:56] nublish101 : The other is nearly handing on and well the battery I need a new case for it ifni can find a spear casing for that

[2021-05-06 06:48:09] nublish101 :

[2021-05-06 06:48:53] nublish101 : @bin4ry thinking I can probably super glue the leg for now but but yeah that battery took the worst hit

[2021-05-06 06:49:39] bin4ry : yah, you can try to look around in stores and ask for units that maybe sitting there for some years :wink: thats the only way to get an old version "new". still remember 100 firmware does not allow altitude removal "only" nfz removal. FCC is available for all versions.

[2021-05-06 06:50:34] nublish101 : Yeah I'm supprised there hasent been much done with nlds rooted boards

[2021-05-06 06:50:47] nublish101 : I'd have expected them to have opened huge gate ways

[2021-05-06 06:52:02] bin4ry : wrong place to discuss this. we speak about DH here :slightly_smiling_face:

[2021-05-06 06:52:15] nublish101 : Yeah sorry

[2021-05-06 06:52:47] nublish101 : Either way choice is hard trying to find dji authentic spears for. My. Mavic ones proving difficult

[2021-05-09 07:05:38] gregw : Can you change the battery type parameter for the Mini 2 now?

[2021-05-09 07:39:54] bin4ry : from the top of my head i think no. but you can just start the software and check it, it’s a free feature to edit parameters

[2021-05-09 15:43:17] dronepilot : Earlier firmware on the air 2 i did change the battery type worked perfectly. If i remember .250 was the firmware not 100% sure.

[2021-05-09 18:30:16] oakley75 : Yep, 250

[2021-05-10 12:50:55] heresmydron : <https://github.com/444A49/ma2findings/blob/main/parameters_v250.md>

[2021-05-10 12:51:13] heresmydron : 0130 is the last one that allows battery_type other than 1

[2021-05-10 14:54:52] originaldobo007 : Yeah - on Air2S battery type is locked to 1 as well.

[2021-05-10 16:06:16] oakley75 : You're good!

[2021-05-10 18:19:54] dronepilot : I wished i could downgrade my Air 2 back to .250 firmware :cold_face:

[2021-05-11 22:49:39] thecomicbookhunt :

[2021-05-12 21:21:34] dronepilot : Anyway to change firmware value number?

[2021-05-13 04:04:38] bin4ry : what do you mean?

[2021-05-13 10:31:00] dronepilot : Firmware has different value i did upgrade my SC to the latest that has a 2 value. Now I’m trying to downgrade to a 1 value.

[2021-05-13 11:01:59] bin4ry : antirollback value? you cannot downsgrade it, that is actually the basic thing blocking the downgrade, the firmware version does not matter at all only this value matters. this value can never go down, only be the same or can increase

[2021-05-13 21:30:27] dronepilot : Understand so we are stuck on this atirollback value : (

[2021-05-14 05:25:18] hazardc : s0ftice (the guy who made the parrot LTE mod was actually having some success with that port and developing LTE mod for the mavic pro but scrapped the whole project mostly because "battery life" ... i don't want the lte mod to be able to fly 50km out, i want it to be able to go 1-5km out and be able to .... use the cell phone towers around me instead of having to avoid them to keep a signal.. i want to be able to go around the back side of a building without losing signal, or be able to drop altitude at a few km out..

[2021-05-18 13:26:17] dronepilot : Matrice 210 RTK V2 anything?

[2021-05-18 13:28:16] bin4ry : nope, i only can support drones that i have bought and tested everything properly

[2021-05-19 14:59:59] dronepilot : Understand, thanks.

[2021-05-22 09:20:38] keskin93erdem : Can DH enable FCC mode on MM1?

[2021-05-22 09:20:45] bin4ry : yes

[2021-05-22 09:20:49] bin4ry : with android app

[2021-05-22 09:21:02] bin4ry : <https://drone-hacks.com/dh-companion>

[2021-05-22 09:22:23] keskin93erdem : My drone is FCC HW, but I do live in CE Country so best I get now is around 500m with YAGI antennas, If I use the FCC hack do I get full advertised ranges in CE country too?

[2021-05-22 09:23:28] keskin93erdem : Also should I update my DJI FLY app to latest or keep it on 1.4.0?

[2021-05-22 09:23:46] 007 : Yes

[2021-05-22 09:23:55] bin4ry : you get full FCC power then, the range is still dependend on the environment. nobody can gurantee range, because if you fly in the city for example all wifi routers will fuck up your drone as the mini1 is only wifi. so it WILL get you the best power possible.

[2021-05-22 09:23:59] bin4ry : app does not matter really

[2021-05-22 09:24:09] keskin93erdem : oh great

[2021-05-22 09:24:25] bin4ry : but you need to do the hack before each flight

[2021-05-22 09:24:59] keskin93erdem : yeah I don't mind it

[2021-05-22 09:25:26] keskin93erdem : Do you know any discount codes ?

[2021-05-22 09:25:42] bin4ry : check our partners section, some of them have discounts :wink:

[2021-05-22 09:26:33] keskin93erdem : will do great

[2021-05-22 09:26:57] bin4ry : downside on the FCC hardware is that you do not get any visual feedback on the transmission graph (i.e. reduced channels)

[2021-05-22 09:27:19] bin4ry : because on CE hardware you can look at the 2.4Ghz channels, they wil lreduce from 13 to 11

[2021-05-22 09:28:15] bin4ry : but FCC hardware misses the 2.4Ghz completely, so you cannot see it in the graph, but it works, we have measured it with customers (also the way is the same way that dji activates fcc, so there is no doubt)

[2021-05-22 09:38:56] keskin93erdem : So it is different from the "\x55\x0e\x04\x66\x2a\x1b\x07\x27\x40\x06\xfb\x02\xac\x35" byte sequence method

[2021-05-22 09:41:43] bin4ry : this is also done on top

[2021-05-22 09:41:44] bin4ry : to get most

[2021-05-22 09:41:54] bin4ry : but it is done automatically in the android

[2021-05-22 09:41:59] bin4ry : this was my first hack

[2021-05-22 09:42:08] bin4ry : then i added fcc

[2021-05-22 09:42:50] bin4ry : now it is fcc + boost

[2021-05-22 09:42:55] bin4ry : and not only boost

[2021-05-22 09:43:08] bin4ry : it works on 2.4 and 5Ghz perfectly

[2021-05-22 09:47:04] keskin93erdem : Oh great then I always assumed this was for FCC

[2021-05-22 09:47:58] keskin93erdem : also didn't knew you figured that sequence out, learned it from some github repo never credited this to you

[2021-05-22 09:48:11] bin4ry : yes

[2021-05-22 09:48:21] bin4ry : they stole it form my software and never gave credits

[2021-05-22 09:48:46] bin4ry : i am not sure if the github owner knows, i think another guy shared it in the russian telegram group etc. etc

[2021-05-22 09:50:04] bin4ry : not the first time and not the last time things from my software was stolen and not credited (or even put as own research :wink: ) not even noticing that the FCC / boost packets are known for a loooooooong time and it is documented in the github of my patcher :wink:

[2021-05-22 09:53:23] keskin93erdem : :sweat_smile:

[2021-05-22 09:53:58] keskin93erdem : It is bad, but after researching a while it is good to now, creator of the exploit is getting paid

[2021-05-22 09:55:36] bin4ry : keeps things going, this software is merely covering the costs of getting new drones to research, and prices are low in comparision to the drone price. atleast that is what i think

[2021-05-22 09:57:29] keskin93erdem : Living in the third world country price is just right for me maybe even higher. But given our exchange rate it is expected :sweat_smile:

[2021-05-22 09:58:33] bin4ry : sorry to hear that

[2021-05-27 06:13:54] fuhange : who have experience about hacking mini2

[2021-05-27 06:14:06] fuhange : I have dji mini2

[2021-05-27 06:15:21] fuhange : and I tried to used monkeydev to tweaks dji fly app

[2021-05-27 06:18:30] fuhange : fianlly two lines are above -100 and -90 respectively

[2021-05-27 06:21:28] fuhange : I'm not sure if I just changed indicator but not actually switched

[2021-05-27 06:24:49] fuhange : @bin4ry I have checked birdmap on your site and why some functions are only available on android?

[2021-05-27 06:58:19] bin4ry : because permanent access to the drone is not possible so the hack needs to be done after boot of the drone. iOS i don’t do, store rules are too harsh and i don’t like the idea of asking for users UUID to sign the apps for then etc.

[2021-05-27 07:00:46] bin4ry : i don’t know what monkeydev hack is. i can only speak for my hack, i do a proper switching of the radio mode inside the drone, without fakingGPS or other cheap tricks. the drone behaves as it would in an fcc country. no patching of dji fly needed, so no risk involved.

[2021-05-27 07:13:40] fuhange : thank you for the explanation

[2021-05-27 07:19:53] fuhange : in my way, I hooks a specific function of dji fly to return US country code, monkeydev is a strong tool which can patch ios app, check it <https://github.com/AloneMonkey/MonkeyDev> if you can write some objective-c code

[2021-05-27 07:23:31] fuhange : Idk if you used similar principle as mine on drones'firmware

[2021-05-27 07:39:17] fuhange : oh. maybe there is a directed fcc switch on drone

[2021-05-27 07:39:56] fuhange : so you dont need to change any params about location

[2021-05-27 07:40:35] fuhange : @bin4ry

[2021-05-27 07:46:23] bin4ry : i see

[2021-05-27 07:46:26] bin4ry : i don't change location of the drone

[2021-05-27 07:46:33] bin4ry : i use DUML to speak to the drone

[2021-05-27 07:59:06] fuhange : senior!

[2021-05-27 08:11:37] bin4ry : :slightly_smiling_face:

[2021-05-27 10:22:09] fuhange : @bin4ry but in your way (hack drones firmware), it can ignore app platform(ios/android),right?

[2021-05-27 10:23:36] fuhange : I mean this hack should be available

[2021-05-27 10:24:03] bin4ry : no

[2021-05-27 10:24:05] bin4ry : and yes

[2021-05-27 10:24:07] bin4ry : you are mixing stuff

[2021-05-27 10:24:17] fuhange : emm..

[2021-05-27 10:25:08] bin4ry : this red items in your screenshot means to pop a shell on the drone and make persistent changes on the drone. this is not available on all drones.

[2021-05-27 10:25:44] bin4ry : on drones where this is not available i created an android app to hack the signal power on the go. communicating the same way dji does. this hack is not persistent on the drone and vanishes after reboot

[2021-05-27 10:25:58] bin4ry : the first hack is available on all phone platforms, because the drone is hacked

[2021-05-27 10:26:26] bin4ry : the second hack is android only, because our app is android only :slightly_smiling_face:

[2021-05-27 10:26:39] bin4ry : or i misunderstood you, also possible :smile:

[2021-05-27 10:27:34] fuhange : i see, what you want to achieve is permanent rather than temporary

[2021-05-27 10:27:57] bin4ry : yes, the desktop app hacks the drone via firmware modifications and are permanent -> after that it does not matter anymore which device you use to fly. but this is not available for all drones, due to missing exploits for the new drones

[2021-05-27 10:30:14] bin4ry : due to missing exploits i created a new way to enable fcc, the android app dh-companion. <https://drone-hacks.com/dh-companion> we are able to temporary change the power mode of the drone, but cannot do it permanent. so i created this to do it on the go :slightly_smiling_face: so no exploit to persist is needed and due to that i can apply it to a wide range of drones

[2021-05-27 10:30:25] bin4ry : i hope that explains it :slightly_smiling_face:

[2021-05-27 10:32:47] fuhange : Is the system running on the drone android?

[2021-05-27 10:33:06] fuhange : cause I saw some words like "busybox" on doucment

[2021-05-27 10:33:12] bin4ry : depends on the drone

[2021-05-27 10:33:17] bin4ry : on most yes

[2021-05-27 10:33:25] bin4ry : take a look through the firmware dumps

[2021-05-27 10:33:32] bin4ry : start with older ones you get the idea then :slightly_smiling_face:

[2021-05-27 10:34:13] bin4ry : get a firmware from dankdronedownloader and decrypt it with @mefisto firmware tools (<https://github.com/o-gs/dji-firmware-tools>)

[2021-05-27 10:34:43] bin4ry : mavic pro 1 i would recommend

[2021-05-27 10:35:05] fuhange : ok, I'm gonna check it

[2021-05-27 10:35:15] bin4ry : great! :slightly_smiling_face:

[2021-05-27 10:35:29] bin4ry : there are dedicated channels for each topic

[2021-05-27 10:35:37] bin4ry : so lets keep this ~dronehacks :wink:

[2021-05-27 10:36:56] fuhange : it would be better if exist mini2 research, so I can practice on mine

[2021-05-27 10:38:56] bin4ry : it is up to you to get there, people here do not hand out stuff on a silver plate instead they enable others. start with the work done and understand it instead of starting at 95% start at 0% :slightly_smiling_face: no drone needed to reverse engineer binaries

[2021-05-27 10:39:39] bin4ry : with dji-firmware-tools you can even decrypt the files already, which is a big step (chicken - egg problem), when this started such stuff was not existent

[2021-05-27 10:40:05] bin4ry : so now back to topic please, find a suiting channel for all your questions please :slightly_smiling_face:

[2021-05-27 10:41:16] fuhange : sorry

[2021-05-27 10:41:44] bin4ry : no need to say sorry :slightly_smiling_face:

[2021-05-27 10:42:24] fuhange : glad to meet you

[2021-05-27 12:23:49] bin4ry : likewise :slightly_smiling_face:

[2021-05-27 12:55:07] fuhange : @bin4ry dji_xv4_fwcon.py DJI Firmware xV4 Container tool; allows extracting modules from package file which starts with `xV4`, or creating container by merging firmware modules. Use this tool first, to extract the BIN file downloaded from DJI, as long as the file starts with `xV4`. Example of extracting modules from DJI firmware package for _Phantom 3 Pro_: `./dji_xv4_fwcon.py -vv -x -p P3X_FW_V01.08.0080.bin`

[2021-05-27 12:55:41] fuhange : this example seems wrong, filename doesn't start with xV4

[2021-05-27 12:55:47] fuhange : it's P3X

[2021-05-27 12:55:56] fuhange : :smiling_face_with_tear:

[2021-05-27 12:56:53] fuhange : did I misunderstood?

[2021-05-27 13:00:35] bin4ry : yes you misunderstood. it speaks about the data not the filename, again. wrong channel.

[2021-05-27 13:04:10] fuhange : should I send on general channel?

[2021-05-27 13:05:38] bin4ry : or ~spoon-feeding if you have a really low-knowledge question

[2021-05-27 13:05:49] fuhange : ok

[2021-05-27 13:06:08] bin4ry : this channel is about the drone-hacks application :slightly_smiling_face: every channel has a reason

[2021-05-27 13:06:38] bin4ry : and as you asked xV4 or IM*H , ther eis the firmware tools in front of you, opensource , just read them :stuck_out_tongue:

[2021-05-27 13:07:57] fuhange : ok, I will try by myself amsp

[2021-05-27 13:24:41] bin4ry : :slightly_smiling_face:

[2021-06-01 16:41:33] the.hope.ltd : Hello I have mavic 2 z wich is not linking to rc Update always ask for missing updating meduals The link led on ac stay red even after pushing Any idea for sulotion Or where is the rf board on core board of m2??

[2021-06-02 17:11:34] dronepilot : O have the same problem on a M2Z here @the.hope.ltd did try to downgrade to .300 mc + rc standard no link and upgrade tô the latest also no linking.

[2021-06-03 01:38:15] dronepilot : Another thing this same M2 stopped working 2.4ghz frequency only get 300 to 500 meters out. Only works on 5.8ghz, never crashed don’t no what happened to this bird. Any help would be appreciated.

[2021-06-03 06:56:44] mel69hash : I'm having this too on MP. No linking from any RC, PC & even the wifi no link

[2021-06-03 07:36:55] bin4ry : hey. as this is no dronehacks related issue can we move it out here? sorry i have no idea either. maybe a hw issue ?

[2021-06-03 09:57:06] dronepilot : On the M1 i had this issue already but i got it fixed. Give a try on yours just follow this step and cross your fingers. Get a fully charged battery, power on and leave inside a fridge for 1 hour, rc powered off. When finished power down, turn on your rc and power on the drone try to link again.

[2021-06-06 09:10:27] d95gas : Has anyone pulled a list together of settings that can be changed on the Mini 2 using DH Desktop application??

[2021-06-06 18:24:51] trulala69 : Have a look at the excel sheet @asdrubale has posted … [https://dji-rev.slack.com/files/U61AW8HC1/F022FB02ADV/mini2-parameter-rev6.xlsx](https://dji-rev.slack.com/files/U61AW8HC1/F022FB02ADV/mini2-parameter-rev6.xlsx)

[2021-06-06 19:02:53] asdrubale : Sorry some note are in Italian ,

[2021-06-06 19:07:45] jefdrones : Does anyone know how to read the sensor IMU of the camera to change or record her number in the IMU of the drone? Thank you in advance for your help.

[2021-06-07 07:30:25] d95gas : @trulala69 @asdrubale Thanks Guys really appreciate that.... Will see if I can get some translation done on those Italian notes (if you dont mind) :+1:

[2021-06-07 07:32:38] pingspike : I thought these were on the wiki? :thinking_face:

[2021-06-07 07:50:19] d95gas : Oh bugger, keep forgetting about the wiki ...... Will do a check now

[2021-06-07 07:52:19] d95gas : Yep they are there in the wiki, but "*asdrubale*" has put together a nice spreadsheet with his test on the various parameter's, will translate the Italian and add to the wiki.

[2021-06-07 07:52:27] pingspike : :+1::skin-tone-2:

[2021-06-07 10:37:17] trulala69 : :+1:

[2021-06-09 11:53:18] johnny : Anyone have pentested some drones and have some checklists what you look for? I got access to a few drones but never pentested them so kind of lacking a good methodology

[2021-06-09 13:13:13] dkovar : I'm not an expert at this, but is it possible that you can use the same methodology that you would when doing a pentest on a remote network? Oversimplifying, many UAVs are essentially flying networks with discrete CPUs.

[2021-06-14 15:16:25] cloudwerx : !apk

[2021-06-14 15:21:00] cloudwerx : Using Linux and and @bin4ry's awesome APK tools I rolled my own version of GO 4.1.22. I have a highly modified Mavic Pro as well as a Mavic 2 Pro that is basically fully un-touched as far as modding goes. Is it possible/OK to run the current GO app from the Play store along side the modded one?

[2021-06-14 15:44:42] cloudwerx : Yesterday I went out with the M2P and decided to un-install my modded 4.1.22 and installed the latest one from Play store just in-case. Unfortunately I forgot to flip on airplane mode and the piece of shit updated my m2 AC FW to .700 (fuck DJI) trying to find a way to fly my m2 and m1 with same phone/tablet. Any ideas?

[2021-06-16 04:06:57] sdcoughlan : try different phone. if possible different remote , but most likely coreboard issue.

[2021-06-16 13:26:36] cat.db : i use myself account bought almost 5 license,and doesn't change password and account,i don't know who change it .in normal,website only can password,why dh can change password and account ,even doesn't tell me .i doesn't receive change password and account email,why?

[2021-06-16 13:28:36] cat.db : i send email to support,but no one answer,is my computer not safe or dh computer not safe ,be hacked?

[2021-06-16 13:34:57] bin4ry : @orangeclassmate your ticket was answered, you never answered back ..... we did not change your account. some chinese IP address logged into your account with your password and changed the password and username

[2021-06-16 13:36:56] bin4ry : @orangeclassmate my answer was yesterday already

[2021-06-16 13:36:59] bin4ry :

[2021-06-16 13:37:53] bin4ry : feel free to write me in support or here, but do not say i didn't answer you when i have answered you minutes after your own mail

[2021-06-16 13:56:11] cat.db : no,i send you after.send almost 3 email,no answer.

[2021-06-16 13:58:13] bin4ry : there is no further email in our system. this is the last message that hte system has from you.

[2021-06-16 13:58:47] bin4ry : login to <https://support.drone-hacks.com> and check your account

[2021-06-16 13:58:50] bin4ry : you will see

[2021-06-16 14:14:33] cat.db : yes,mabe our country is firewall forbidden my eamil,now is solved,thanks.

[2021-06-16 15:57:22] behram11 : Is it possible to upgrade dji fpv drone motors and still have it fly? Or would this be a no go since the firmware (or something similar) is proprietary?

[2021-06-17 05:34:09] elintnl : New [Mini 2](http://store.dji.com/product/mini-2?utm_source=djiforum&utm_medium=keywords&utm_campaign=mini-2-launchmini-2?utm_source=djiforum&utm_medium=keywords&utm_campaign=mini-2-launch/mini-2?utm_source=djiforum&utm_medium=keywords&utm_campaign=mini-2-launch) Firmware update v01.03.0000 , @bin4ry is it safe to do so for the DHCompanion apk??

[2021-06-17 05:54:19] bin4ry : please wait until we test it, once tested the birdmap will be updated.

[2021-06-17 18:23:40] dronepilot : Yes it was a coreboard issue

[2021-06-24 04:20:49] bin4ry : wrong channel, read the output you are missing the crypto dependency in python

[2021-06-25 02:22:52] jefdrones : ops...sorry

[2021-07-07 17:42:41] almog.baku : hey guys

[2021-07-07 17:43:02] almog.baku : how do I upgrade my device to the latest firmware

[2021-07-07 17:46:08] almog.baku : also, I cannot bind my device…. any chance it’s related to the hack?

[2021-07-07 18:43:51] almog.baku : i have the same issue

[2021-07-07 18:44:36] almog.baku : how did you solve it?

[2021-07-07 18:48:18] pingspike : which device?

[2021-07-07 18:50:33] dronepilot : Changing the core board.

[2021-07-07 20:54:42] almog.baku : M2z

[2021-07-07 20:59:48] almog.baku : should I disable the fcc-boost hack before upgrading the fw?

[2021-07-07 21:00:51] almog.baku : how much it cost you? where did you buy it?

[2021-07-08 00:46:41] dronepilot : I’m from Brazil here i got it for 2.000 Reais.

[2021-07-08 04:28:18] bin4ry : Hello, the boost hack must not be disabled to upgrade the firmware. If you upgrade it MIGHT be disabled automatically (depends on which to which firmware you flash). If you have problems contact support at [support.drone-hacks.com](http://support.drone-hacks.com) , there you can also send logs without fearing your serialnumber getting public :slightly_smiling_face: so that we can take a look

[2021-07-08 07:02:25] almog.baku : I’m trying to upgrade to the latest version (700), will it disable the fcc-boost? I’m traveling abroad w/o a PC

[2021-07-08 07:25:25] bin4ry : depends also from which version, basically it depends if the 0901 module is upgraded or not in this jump. i would not recommend to update if you depend on the fcc hack working. updating barely fixes issues

[2021-07-08 14:58:47] almog.baku : OK, I upgraded my drone. I hoped it’ll fix my connectivity issues - but it seems it hasn’t

[2021-07-08 14:59:48] almog.baku : I hope it’s not an issue with the main board

[2021-07-08 15:25:02] bin4ry : there is an issue with some m2 where it cannot link anymore, but in that cases the flashing fails

[2021-07-08 15:25:10] bin4ry : most likely you "just" need to link again

[2021-07-08 17:38:21] almog.baku : lol

[2021-07-08 17:39:00] almog.baku : damn, thats expensive

[2021-07-09 01:38:12] dronepilot : Yes it was… It seems to happen only o M2Z bird don’t no why only difference is the camera on the 2P version. Locally happened to two of my friends and one close to my city.

[2021-07-09 01:38:37] dronepilot : All them where with boost enabled.

[2021-07-27 06:04:15] bin4ry : New release: <https://drone-hacks.com/blog/post/430>

[2021-07-27 11:18:10] loaderbull : Nice one @bin4ry bought and activated for my Air 2S :slightly_smiling_face:

[2021-07-27 14:37:29] mail451 : I will try this weekend !!

[2021-07-27 14:49:19] bin4ry : :slightly_smiling_face:

[2021-07-27 18:00:15] pingspike : just when I thought nobody was working on anything :man-bowing::skin-tone-2:

[2021-07-27 18:08:49] mail451 :

[2021-07-27 18:09:23] mail451 : Using the hack on 1.1.6! Man the ma2 just got even better

[2021-07-27 18:09:42] mail451 : This machine rips with the climb parameters modded too

[2021-07-28 10:46:45] cs2000 : Good to see some progress still being made isnt it :slightly_smiling_face:

[2021-07-28 14:22:00] phireph0x : Does the new release support removal of NFZ for Mini 2?

[2021-07-28 14:54:08] bin4ry : this release is doing fcc on teh drone itself, which solves several issues for people with iPhones and smartcontrollers. Also it enables to use FPV with FVV along the dji fly app for second monitor :slightly_smiling_face: sadly no nfz .

[2021-07-28 15:38:42] loaderbull : @bin4ry can’t check as at work but there is apparently a new Air 2S firmware out. Have you managed to take a look to see if the FCC hack is still possible with this release? Was in ~dankdronedownloader channel :slightly_smiling_face:

[2021-07-28 15:40:37] bin4ry : i cannot now and unfortunately i will not be able to test before monday.

[2021-07-30 09:30:58] trulala69 : Short question: is the DH lite license bound to the drone? I‘m not sure, I bought one for a Mini1 & just bought another one for Mini2… is that correct?

[2021-07-30 09:31:15] cs2000 : To the drone mate yes

[2021-07-30 09:31:26] trulala69 : Thanks :pray:

[2021-07-30 15:12:19] austinc3030 : According to this forum, there is a release of NLD they are targeting for today for the MA2. Has anyone seen or heard anything else on this? [https://nolimitdronez.com/boards/topic/3671/mavic-air-2/page/4#6793](https://nolimitdronez.com/boards/topic/3671/mavic-air-2/page/4#6793)

[2021-07-30 15:14:42] dnacho : It's just pretty much the same drone hacks already does, that's what I think

[2021-07-30 15:15:39] austinc3030 : I’m hoping they implemented the NFZ removal.

[2021-07-30 15:16:15] austinc3030 : I’m moving near an airport that is seldom used and isn’t manned half the time but I’m within the NFZ

[2021-07-30 15:17:15] austinc3030 : I had dronehacks on my mini. Made it a whole new drone. Was able to get 2.5 mi range on it

[2021-07-30 15:17:35] dnacho : I'm pretty sure nfz is not on that release

[2021-07-30 17:13:14] trulala69 : Hmm, I‘ve applied the FCC hack and followed the activation sequence, which is real fun to do, well done… But the MM2 is not flashing red, but blue in my case…

[2021-07-30 17:13:21] trulala69 :

[2021-07-30 17:13:41] trulala69 : I assume it’s in FCC now, correct?

[2021-07-30 17:17:59] trulala69 : BTW after the button sequence the front led turns white again

[2021-07-30 17:29:27] quad808 : No, what you are showing is not FCC mode.

[2021-07-30 17:30:00] quad808 :

[2021-07-30 18:08:08] trulala69 : Hmm, strange… I suppose the error sits in front of the drone… what indicates FCC in your screenshot? I can’t spot the difference…

[2021-07-30 18:13:50] loaderbull : Look at the 1km line…

[2021-07-30 18:21:41] trulala69 : Ok, google finally helped to see the difference… line above or below -90dBm…

[2021-07-30 18:24:39] bin4ry : on android in dji fly only the 1km text jumps up

[2021-07-30 18:25:04] bin4ry : see here: [https://drone-hacks.com/dh-companion](https://drone-hacks.com/dh-companion) for example screenshots

[2021-07-30 18:25:08] loaderbull : Yep that’s it nice one bin4ry

[2021-07-30 18:25:49] bin4ry : if it does not change see if you had “dji assistant 2 for mavic” installed. if not install it reboot and hack again, then it will work :)

[2021-07-30 18:26:11] loaderbull : On Smart Controller mine only shows the text move, not the actual line

[2021-07-30 18:40:44] trulala69 : I had assistant installed, but on Win7 in a VM… Is the Mac OSX Version stable now? So, I would try with this one again…

[2021-07-30 18:49:23] bin4ry : we do not have an osc version anymore. vm cannot work properly. please use an windows 10 pc. it will work then. we have put the infos on the download page too, especially on os x vm will not work. the problem is os x and if the host cannot support the drone properly then the guest will not work either. so please use bootcamp and install windows 10, it will work then easily :)

[2021-07-30 18:52:08] trulala69 : Bootcamp? „Only over my dead body!“ :joy: I‘ll work something out when I’m back from holiday… I thought, I would have chance with OSX&VM…

[2021-07-30 19:02:19] bin4ry : try windows 10 in the vm atleast ;)

[2021-07-30 19:14:15] trulala69 : Ok, thanks Andreas! I‘ll give it a try and will report back! I hope, I can fly the MM2 in this state without issues…

[2021-07-30 19:34:40] bin4ry : you can definetly

[2021-07-30 20:25:33] dkovar : Why not ask this in the ~nld channel?

[2021-08-01 14:40:08] monkeyman : I just upgrade my mp2ed to 800 firmware, after that I goto DH apps, it seem only fcc and stock option, no fcc boost option, please help @bin4ry . Thanks!

[2021-08-01 14:58:53] bin4ry : that is correct, there is no boost in the modem firmware on this firmware version! so we cannot offer it, we only offer boost where it is possible

[2021-08-03 09:38:26] matthijst : Got the license for mini2# fcc works great. Hope one day well be able to get rid of NFZ as well.

[2021-08-03 13:56:01] austinc3030 : I’m new to slack and didn’t see the nld channel. My bad.

[2021-08-05 10:33:42] loaderbull : Hey @bin4ry did you manage to check to see if the latest Air 2S firmware can support FCC mode? Apologies if you have, i havent had access to my laptop recently to load up DH client. Cheers!

[2021-08-05 10:57:13] bin4ry : not yet read, you can check the birdmap once the hack is done the birdmap will be updated

[2021-08-07 11:12:44] heresmydron : hey @bin4ryjust noticed the perma fcc hack is only available for firmware 0610 which bumps the antirollback value... if youre looking to test it on a pre 0610 drone happy to volunteer with mine. mine is on 0130

[2021-08-11 15:09:29] bin4ry : set the channel topic: DroneHacks homepage: Up | Support: Up | Latest Desktop Version: 1.17 | Latest Android Version: 1.0.8

[2021-08-12 14:20:57] pingspike : what's new?

[2021-08-12 14:27:24] bin4ry : it was this update: <https://drone-hacks.com/blog/post/430> i just forgot to update the channel topic before :smile:

[2021-08-12 14:29:31] pingspike : :slightly_smiling_face:

[2021-08-12 14:29:34] cadbob : Bin, that link is too Release 1.15/1.16 We are on 1.17 now! :)

[2021-08-12 14:46:58] bin4ry : true :sweat_smile:

[2021-08-13 09:19:36] bin4ry : New update at drone-hacks. Full altitude and NFZ unlock (Mavic2, P4Pv2, Mini1, Mini2, Air2,Air2s, FPV) :slightly_smiling_face: <https://drone-hacks.com/blog/post/443>

[2021-08-13 09:19:46] bin4ry : set the channel topic: DroneHacks homepage: Up | Support: Up | Latest Desktop Version: 1.20 | Latest Android Version: 1.0.9

[2021-08-13 09:24:46] loaderbull : @bin4ry seriously :grin:

[2021-08-13 09:30:09] d95gas : What fantastic news for us all...... Well the one's with the drones it works on, great work @bin4ry :+1:

[2021-08-13 09:34:33] d95gas : @bin4ry regarding the Cert, will this stick after a firmware upgrade or will there be a process to renew the cert with the users existing licence if there is a firmware update, or do we need to stick on the current firmware?

[2021-08-13 09:43:53] cs2000 : Seriously impressive upgrade that has been created here! Glad to finally see it out in the wild!

[2021-08-13 09:45:39] d95gas : couldn't agree more, this is like going back to the "good old days" of MP1 :rolling_on_the_floor_laughing: - This is going to make a serious difference to the community

[2021-08-13 09:47:06] cs2000 : Nice little bonus for users on a Lite license too, free upgrade included :slightly_smiling_face: With regards to the certificate @d95gas it isnt firmware specific (so no need to stick on a certain version), but im not sure if it persists between FW upgrades, il let @bin4ry answer that as my MP1 isn't supported so have been unable to test. Id think it would be persistant as it uses the same mechanism as DJI's official cert's

[2021-08-13 09:49:02] d95gas : Ironic thing was that yesterday I added the lite licence to the basket and forgot to checkout...... Well they do say "he who hesitates..... Loses" :rolling_on_the_floor_laughing: Great news if its persistent, makes it even better. Going to go do that purchase now before DH upgrades pricing .

[2021-08-13 09:56:54] d95gas : @bin4ry Just got a new licence, and downloaded latest version of your DH App, ver 1.20. On running it, it reports I have an old version and instructs to download a new version??

[2021-08-13 09:58:12] d95gas :

[2021-08-13 09:58:52] trulala69 : Wow! Thanks a lot for upgrading all the lite licenses to regular ones!

[2021-08-13 10:00:23] cs2000 : Have messaged him on an alternate platform to get his attention quicker

[2021-08-13 10:02:40] bin4ry : you are welcome

[2021-08-13 10:02:48] cs2000 : Fixed!

[2021-08-13 10:02:50] bin4ry : like it was always promised, i keep my word :slightly_smiling_face:

[2021-08-13 10:03:22] cs2000 : @bin4ry works fast, this is fixed!

[2021-08-13 10:05:09] bin4ry : @d95gas Should be fixed now, thanks for letting me know :slightly_smiling_face:

[2021-08-13 10:07:30] bin4ry : @flymymavic has made a nice video

[2021-08-13 10:07:31] bin4ry : <https://www.youtube.com/watch?v=Q5LVAUlNLGY>

[2021-08-13 10:11:59] asdrubale : Drone-hack team and you clearly Bin4ry are the best

[2021-08-13 10:12:07] d95gas : No problem

[2021-08-13 10:12:53] d95gas : Yep worked a treat, no upgrade message from 1.20

[2021-08-13 10:36:06] cadbob : I haven't hooked up to Mini yet, but curious if using Litchi? I'm thinking the magic is in the hacked certificate so once on AC both Fly and Litchi should work?

[2021-08-13 10:39:29] bin4ry : @cadbob i cannot tell, please test it. It works the same way as the original cert. You NEED to use Fly/Go4 before it works as it is bound to the useraccount.

[2021-08-13 10:43:56] cadbob : Yes I'm going to hook up drone to PC later today and give it a shot, your awesome as always Bin!

[2021-08-13 10:52:24] wilsondonakanty07 : I never updated the AC firmware of my MM2, thinking that the NFZ hack would be most probably for the initial firmware version.. And with the new drone hacks update, I'm pretty surprised.. :clap::clap::clap: I already had the previous license with discount code in my cart, and was planning to buy it this weekend or next, before I go for a ride.. And now I'd have to pay 40€.. Damn, should have bought the license last weekend :face_palm:

[2021-08-13 10:54:35] mail451 : So the method works by having a cert that the DJI server then approves and lets the app have all restrictions bypassed?

[2021-08-13 10:54:50] mail451 : Can DJI detect which certs are from Drone Hacks?

[2021-08-13 10:54:59] bin4ry : no the cert gets not calculated by dji

[2021-08-13 10:56:05] bin4ry : it is done on the drone-hacks server, the login is only needed to get the DJI user-id, this ID is part of the certificate. The drone itself will only show certificates for the user-id currently logged into the DJI Go4/Fly app. hence the login. But the certs are completely generated on the drone-hacks server

[2021-08-13 11:21:33] mail451 : Ah cool

[2021-08-13 11:34:32] mel69hash : Did I hear NFZ bypassed?

[2021-08-13 11:46:17] mail451 : Yeah it's 2017 all over again

[2021-08-13 11:46:51] mail451 : Does the NFZ unlock work if the phone is on airplane mode during flight?

[2021-08-13 11:48:17] pingspike : :dancer::skin-tone-2:

[2021-08-13 11:48:57] trulala69 : @bin4ry BTW I can confirm Win10 in a VM on a Mac works. Just applied FCC hack and NFZ successfully ... Thanks again for your help!

[2021-08-13 11:50:27] pingspike : would this work with the smart controller too? (On mini 2)

[2021-08-13 11:52:16] pingspike : :man_dancing::skin-tone-2:

[2021-08-13 11:52:22] mail451 : There are no drawbacks then. People are complaining about the 40 € price but honestly it's a small (40€!!) price to pay for you guys hard work :grinning: :clinking_glasses: :partying_face:

[2021-08-13 11:53:15] mel69hash : @bin4ry ya da Man

[2021-08-13 11:55:31] bin4ry : well, every user with a LITE license was upgraded for free to regular. people will always complain.

[2021-08-13 11:56:11] originaldobo007 : :boom: :exploding_head: :confetti_ball:

[2021-08-13 12:10:22] d95gas : Today has just officially become "Happy Friday" :rolling_on_the_floor_laughing::clap:

[2021-08-13 12:11:10] bin4ry : show us the pictures @d95gas

[2021-08-13 12:11:48] d95gas : Of Happy Friday :slightly_smiling_face: Unfortunately my Mankini is in the wash so cannot show you

[2021-08-13 12:55:20] fredmicrowave : @bin4ry So just to be clear, if the phone stays on airplane mode it can be a one time only login, right ? I mean, no internet connection needed ever, after the cert created? Also, is there any incompatibility if the drone was previously on NLD , for alt removal ?

[2021-08-13 12:57:31] bin4ry : no idea about nld. no internet needed. you just need to login to the dji go4/fly whatever once and then you can stay offline for THIS account. my phone here: i have dji fly with my account already logged in, i can now go to airplane mode, start dji fly and can use this certificate.

[2021-08-13 13:00:42] mel69hash :

[2021-08-13 13:01:44] originaldobo007 : USA! USA! USA!

[2021-08-13 13:05:55] originaldobo007 : This pic brought to you courtesy of [drone-hacks.com](http://drone-hacks.com)

[2021-08-13 13:14:30] fredmicrowave : Thanks, awesome. I am using litchi but should be ok, i can start on go4 the first time. I guess i will have to take the risk about the previous unlock :slightly_smiling_face:

[2021-08-13 13:25:51] mail451 : Wow that is insane

[2021-08-13 13:26:02] mail451 : What was the altitude?

[2021-08-13 13:29:32] originaldobo007 : 11k feet is what I heard.

[2021-08-13 13:29:36] originaldobo007 : :wink:

[2021-08-13 14:41:31] dronepilot :

[2021-08-13 14:43:29] bin4ry : Ok guys, the server is a bit slow currently, you are killing it :smile: :smile:

[2021-08-13 14:43:48] cs2000 : Im not surprised!

[2021-08-13 15:05:23] loaderbull : Cheers @bin4ry installed on M2P and Air 2S. Will try it out when weather improves. Good work DH Team :ok_hand:

[2021-08-13 16:50:15] amanita : First flight over 500 meters with Mavic 2 pro, @bin4ry respect!!! Thank you and your team for what you offer us!!! It works fine also with Litchi. Greetings from Greece!

[2021-08-13 17:14:26] flyingkite : Does the dronehacks app able to load firmware to the mini2 or air2 controller?

[2021-08-13 17:27:24] quad808 : ok, some info about this cert created totally by DH, no info goes to DJI. The cert is tied to your DJI account and your drones FC. Since you need to be logged into the DJI app to use the app, thats why DH needs the DJI login info. No info is EVER sent to DJI. You do not need to have any internet connection from the app in order to use this cert. It's totally independent of DJI. They can suck it. I firewall all my DJI Apps, but up to you. DH can uninstall any certs that are on your drone too! So if you are concerned about doing any firmware update, just load up DH before hand, remove the cert, restart the drone, connect...check for certs (there should be NONE) run your firmware update, reboot after, go back to DH and get a new cert. Done. @bin4ry worked tirelessly on this and deserves the praise. Congrats my man!!!! This is what we have all been waiting for on our newer DJI drones!!

[2021-08-13 17:33:43] quad808 : You can turn on the cert and turn it off whenever you want and go back to a stupidly locked down DJI drone if that is what you are wanting.

[2021-08-13 17:34:37] heresmydron : can attest that nothing goes to DJI. except two requests: one to get the captcha pic, another one to log you in into dji and extract the pilot id

[2021-08-13 17:38:31] quad808 : If you only use your drone while firewalling the app, or in airplane mode, there is ZERO chance DJI can do anything about this cert. I wouldn't be concerned, but if you are...you can pre-cache your maps for your flying area. In rare occasions, DJI has provided total unlock certs for accounts that have met all their stringent requirements. DH just figured out how to get this done without DJI. Perfect.

[2021-08-13 17:38:58] quad808 : Spread the word to all your flying buddies. Freedom is here!

[2021-08-13 17:51:48] quad808 : allegedly :hugging_face:

[2021-08-13 18:50:41] oakley75 : Speechless. Amazing. "Freedom Day" all over again :grin:

[2021-08-13 18:55:37] quad808 : this showed up. From a friend.

[2021-08-13 18:57:38] m4x : @quad808 thats only true if you pin to a given fw version

[2021-08-13 18:58:51] quad808 : whats only true @m4x?

[2021-08-13 18:59:00] m4x : > there is ZERO chance DJI can do anything about this cert

[2021-08-13 18:59:08] m4x : it depends on the drone tho

[2021-08-13 18:59:17] m4x : for mini 2 theres options (for now), that dji could take

[2021-08-13 18:59:22] m4x : but it would be a lot of hassle on their side

[2021-08-13 18:59:50] m4x : they'd probably end up needing to re-issue every cert ever

[2021-08-13 19:00:09] quad808 : of course there are always options. But they would possible need to overhaul their cert procedure....not sure they would do that.

[2021-08-13 19:00:11] m4x : but.. its not as black and white :wink:

[2021-08-13 19:00:21] m4x : just stick to a fw ver, unless u know what changed

[2021-08-13 19:00:41] m4x : just wanted to point it out for ppl with.. less common sense

[2021-08-13 19:00:50] quad808 : yep. I probably shouldn't have said that they can't do anything...LOL

[2021-08-13 19:01:10] m4x : lets just say we are in a good spot for the time being^^

[2021-08-13 19:01:24] m4x : everything userland would be easy to patch too

[2021-08-13 19:01:28] m4x : its just fc on some models

[2021-08-13 19:01:35] m4x : until we get the secrets some way or another

[2021-08-13 19:01:52] m4x : for now the drone wouldnt know if its from dji or not (the cert)

[2021-08-13 19:01:58] m4x : and given its per drone...

[2021-08-13 19:02:08] m4x : either they collect all or add a patch to the app that searches for those

[2021-08-13 19:02:13] m4x : and then bans them

[2021-08-13 19:02:21] m4x : but they could be re-issued

[2021-08-13 19:02:31] m4x : so... they'd need to kill their own cert

[2021-08-13 19:03:59] quad808 : right now all the drones are pretty mature, firmware wise.

[2021-08-13 19:04:03] m4x : (in more technical terms the pub key it checks against)

[2021-08-13 19:04:28] m4x : Mini 2 still has room

[2021-08-13 19:04:42] m4x : I just can't justify fucking with the hw yet :see_no_evil:

[2021-08-13 19:05:14] quad808 : rumor is the Mini 3 is right around the corner for holiday release....possible 4k/60...that would be super nice

[2021-08-13 19:05:32] m4x : Meh they need to fix their sdk shit first

[2021-08-13 19:05:53] m4x : S21 can't even do 4k 30 because shitty dji code on funny exynos bs..

[2021-08-13 19:06:00] m4x : Cuts out the video

[2021-08-13 19:07:16] m4x : end goal for me would be Mini2 with cfw running equal with ma2 feature level (minus what hw doesnt allow for ofc)

[2021-08-13 19:07:43] quad808 : checking out your work on GitHub...nice!

[2021-08-13 19:07:43] m4x : dji code is closer to malware than not

[2021-08-13 19:07:51] m4x : thats just basework

[2021-08-13 19:07:57] m4x : still shitty dji sdk

[2021-08-13 19:08:02] m4x : at least its tested..

[2021-08-13 19:11:13] m4x : but yea if u want to make good use of the dh features, then my rosetta fork is a good place to start with dji sdk dev

[2021-08-13 19:11:25] m4x : just dont forget to copy the frida script

[2021-08-13 19:12:02] m4x : pid works quite well too

[2021-08-13 19:12:11] m4x : the most left was before attitude pid

[2021-08-13 19:12:14] m4x : its a bit more funky

[2021-08-13 19:12:21] m4x : excellent for mapping

[2021-08-13 19:16:47] m4x : you burn fuses

[2021-08-13 19:16:52] quad808 : Yep, I would say so....but like anything...if your drone is working how you want it to, up to you if you need to update.

[2021-08-13 19:17:08] m4x : for now latest is fine, i dont know of any vuln that requires the first iterations

[2021-08-13 19:17:14] m4x : but who knows

[2021-08-13 19:17:24] m4x : we probably wont end up needing it at this point

[2021-08-13 19:17:35] m4x : just someone needs to glitch that fucker to read the fc key

[2021-08-13 19:18:15] m4x : for some people the latest fw version were of some importance

[2021-08-13 19:18:21] m4x : given the features they implemented

[2021-08-13 19:21:44] quad808 : RosettaDrone 2....hahahahaha....love that name

[2021-08-13 19:22:20] oakley75 : Never been the type to update really, but there are good features added sometimes. Hadn't been worth it... till now

[2021-08-13 19:23:44] m4x : i'd consider the battery update critical and i'd suggest not missmatching vers

[2021-08-13 19:23:48] m4x : but thats just me

[2021-08-13 19:23:55] m4x : if u always store them outside, shrug

[2021-08-13 19:24:20] m4x : you never want to be the first to find out :see_no_evil:

[2021-08-13 19:25:07] m4x : > RosettaDrone 2....hahahahaha....love that name Its also a great, free, litchi alternative!

[2021-08-13 19:25:13] m4x : just misses in-app planning

[2021-08-13 21:34:37] flylusive_pat : They don't know they can store things in EEPROM if they want to replace them, instead they hardcoded it all in ROM.

[2021-08-13 21:35:41] flylusive_pat : On new update, they had to rewrite the whole SENC (eeprom + rom), just to be able to update one value when to discharge batteries.

[2021-08-14 00:12:04] m4x : :face_vomiting:

[2021-08-14 02:09:54] mel69hash : @kakerarecever567 hope it's not end of the road for bat mod and tweak.

[2021-08-14 02:50:12] monkeyman : Damn! This hack of the century works on dual enterprise! SUPER!!!

[2021-08-14 04:55:37] lolo780 : Is 12km the max altitude in software?

[2021-08-14 08:10:53] bin4ry : i got some errors for higher values, not sure if i made a mistake but 12km worked for all models very well. and i thought "that is fucking high enough, lol"

[2021-08-14 08:20:44] lolo780 : Just bought DH license #4 to try an M2P. Thanks for the awesome work!!

[2021-08-14 09:09:05] flylusive_pat : There is always a way how to get into the BMS to modify and reprogram it.

[2021-08-14 09:16:24] mel69hash : Yup

[2021-08-14 11:43:41] originaldobo007 : Lolo!! How are you! Long time no see!!!

[2021-08-14 12:52:40] bin4ry : seems dji tries to block us already, if you go online with dji fly it might kick your account, we are trying to solve this problem currently. i already have it working here, it might need an update, standby for updates

[2021-08-14 12:58:54] d95gas : Nice work, suppose for now we should just use Airplane mode or firewall?

[2021-08-14 13:01:04] bin4ry : for sure stay offline then nothing will happen for everyone else i am working on a fix

[2021-08-14 13:02:03] 503496897 : error code 13010？？？？

[2021-08-14 13:04:46] bin4ry : no

[2021-08-14 13:04:55] bin4ry : it does just not set the userid in the fly app for the accounts

[2021-08-14 13:05:07] bin4ry : which causes the certificate to not work, as it can only unlock for a specific user

[2021-08-14 13:22:00] 503496897 : I do set the right user id.

[2021-08-14 13:22:26] 503496897 : 2 drone occur this problem

[2021-08-14 13:23:52] bin4ry : it has nothing to do with you

[2021-08-14 13:24:12] bin4ry : the dji fly app sets your userid to the drone after boot

[2021-08-14 13:24:36] bin4ry : they stopped doing this, which will cause no certificate to work (not even their owns :smile: )

[2021-08-14 13:24:39] bin4ry : i am fixing it right now

[2021-08-14 14:30:23] flymymavic : Cheers Bin4ry

[2021-08-14 15:01:52] 503496897 : what happened. 2 Drone don't work

[2021-08-14 15:08:42] bin4ry : <https://drone-hacks.com/blog/post/500>

[2021-08-14 15:16:17] flymymavic : I tried off line but it’s still blocked, would it best to take the video down for now ?

[2021-08-14 15:19:20] bin4ry : if you were offline all the time it will work

[2021-08-14 15:19:30] bin4ry : if you were online once the app sync'd the new userid

[2021-08-14 15:26:36] flymymavic : Yeah I was

[2021-08-14 16:31:38] bin4ry : someone here with Air2, Air2S or FPV

[2021-08-14 16:32:07] bin4ry : please run the hack agian now in the dronehacks app, it will NOT ask anymore for dji username. pelase run it and tell me the result. @channel

[2021-08-14 16:36:25] austinc3030 : I can try it in an hour or two.

[2021-08-14 16:38:21] dronepilot :

[2021-08-14 16:38:43] amurmurmur :

[2021-08-14 16:38:49] amurmurmur : DJI FPV

[2021-08-14 16:39:00] mail451 : I'm on 1.20, installed yesterday and checked the cert (it was ok). Trying now (MA2)

[2021-08-14 16:40:51] mail451 : Right now it's like this

[2021-08-14 16:40:54] mail451 :

[2021-08-14 16:41:06] mail451 : drone reboots every minute

[2021-08-14 16:41:48] flymymavic : i removed the hack and reinstalled it and its asking for user/pass

[2021-08-14 16:42:35] bin4ry : it should reboot a few time

[2021-08-14 16:42:41] bin4ry : s

[2021-08-14 16:42:45] amurmurmur : for me removing doesnt work either

[2021-08-14 16:43:06] mail451 : Ok, removing the certs to try again now.

[2021-08-14 16:43:29] bin4ry : i have it running here

[2021-08-14 16:43:30] flymymavic : ahh i didnt restart quad

[2021-08-14 16:43:45] bin4ry : i extended the hack and i am doing some stuff here

[2021-08-14 16:43:54] flymymavic : im following the 2nd stage insructions]#

[2021-08-14 16:43:55] bin4ry : that wil lcause djis intervention to be null

[2021-08-14 16:44:11] mail451 : some python window keeps popping up, is that normal?

[2021-08-14 16:44:14] mail451 : (windows 10)

[2021-08-14 16:44:55] bin4ry : python or is it just the stoarge ?

[2021-08-14 16:45:37] mail451 : just see the python logo on the top of the window, no logs or anything

[2021-08-14 16:46:19] bin4ry : ah ok

[2021-08-14 16:46:34] flymymavic : think i messed up somewheremine went thorugh to the press the button ( like the old fcc hack)

[2021-08-14 16:46:44] mail451 :

[2021-08-14 16:46:47] mail451 : After a reboot.

[2021-08-14 16:46:48] bin4ry : did you restart the app @flymymavic?

[2021-08-14 16:46:54] bin4ry : ok thx @mail451

[2021-08-14 16:46:57] bin4ry : i think i know whats wrong

[2021-08-14 16:47:06] bin4ry : maybe i need a little break to fix it

[2021-08-14 16:47:10] bin4ry : i can tell you this much

[2021-08-14 16:47:17] bin4ry : i have it running here, after putting the files manually

[2021-08-14 16:47:29] bin4ry : now i just have to integrate it into the automation for the gui

[2021-08-14 16:48:00] bin4ry : i confirmed it here now on air2, air2s and fpv

[2021-08-14 16:48:04] bin4ry : mini2 coming too

[2021-08-14 16:48:24] bin4ry : but maybe i need to finis hthis tomorrow

[2021-08-14 16:48:38] flymymavic : :+1:

[2021-08-14 16:48:45] mail451 : Yep, take your time.

[2021-08-14 16:49:12] lolo780 : Still working :muscle:

[2021-08-14 16:49:34] flymymavic : i have family round so give me a shout tomorrow if you need anything doing on the mini2 @bin4ry

[2021-08-14 16:50:10] bin4ry : you can alreadt try the mini2

[2021-08-14 16:50:18] bin4ry : i have put the current version on the server

[2021-08-14 16:50:27] bin4ry : but after the hack you need the button shebang

[2021-08-14 16:50:37] bin4ry : and then the certificate should become active automatically

[2021-08-14 16:54:58] mail451 :

[2021-08-14 16:55:07] mail451 : That's what I get now on the MA2.

[2021-08-14 16:55:25] mail451 : Ping me tomorrow if you need anything re: MA2 testing.

[2021-08-14 16:55:55] bin4ry : yah thanks! will ping you guys

[2021-08-14 17:12:51] bin4ry : @channel please test again!!!!

[2021-08-14 17:12:54] bin4ry : @mail451

[2021-08-14 17:12:58] mail451 : on it

[2021-08-14 17:13:21] cadbob : You mean re-patch?

[2021-08-14 17:13:32] bin4ry : repatch

[2021-08-14 17:13:34] bin4ry : yah

[2021-08-14 17:13:37] cadbob : on it

[2021-08-14 17:13:39] bin4ry : air2, air2s fpv or mini2

[2021-08-14 17:13:47] bin4ry : after mini2 please use button trick to actiavte

[2021-08-14 17:14:24] cadbob : now i have Mini 1? Still need me to re-patch?

[2021-08-14 17:14:31] bin4ry : not there yet on mini1

[2021-08-14 17:14:38] cadbob : k

[2021-08-14 17:14:40] mail451 : on ma2: I just click remove altitude limit ... install right?

[2021-08-14 17:14:46] bin4ry : yes

[2021-08-14 17:14:58] loaderbull : Does that mean the M2 is ok at the mo then? I havent tested patches yet and devices been offline

[2021-08-14 17:15:35] bin4ry : @loaderpoo not there yet

[2021-08-14 17:15:38] bin4ry : one drone after another

[2021-08-14 17:15:41] bin4ry : i am one person :slightly_smiling_face:

[2021-08-14 17:16:25] loaderbull : That’s what i was asking bud, if M2 was ok as you hadn’t mentioned it that’s all

[2021-08-14 17:16:56] loaderbull : I will be able to do some testing of the Air 2S a bit later

[2021-08-14 17:19:59] mail451 :

[2021-08-14 17:20:42] bin4ry : please check app

[2021-08-14 17:20:46] dronepilot :

[2021-08-14 17:20:47] mail451 : I will connect to app now

[2021-08-14 17:21:03] mail451 : Can it be online or app has to be offline?

[2021-08-14 17:21:06] bin4ry : @rgf8aerial please read blog at <https://drone-hacks.com/blog/500> i am working on it

[2021-08-14 17:21:09] bin4ry : it can be online

[2021-08-14 17:21:11] bin4ry : @mail451

[2021-08-14 17:21:23] bin4ry : bur reboot drone

[2021-08-14 17:21:38] loaderbull : @bin4ry thought you were having a break lad?!

[2021-08-14 17:22:28] pingspike : @starsky.w I spy you :wink:

[2021-08-14 17:22:37] mail451 : I get the same error "account not logged in" @bin4ry

[2021-08-14 17:22:42] loaderbull : Will go re-patch my A2S

[2021-08-14 17:23:30] dronepilot :

[2021-08-14 17:23:41] dronepilot : @bin4ry link you shared

[2021-08-14 17:23:51] loaderbull : Go to home page

[2021-08-14 17:23:54] mail451 : @rgf8aerial <https://drone-hacks.com/blog/post/500>

[2021-08-14 17:25:32] bin4ry : @mail451 do you have "DJI Assistant 2 for Mavic" installed?

[2021-08-14 17:25:39] bin4ry : please do install that and re-run the hack

[2021-08-14 17:25:45] mail451 : Yes, installed, but closed.

[2021-08-14 17:25:47] bin4ry : ok

[2021-08-14 17:25:49] bin4ry : that is correct

[2021-08-14 17:26:01] bin4ry : thing is certificate shoudl actiavet automatically

[2021-08-14 17:26:07] bin4ry : if the hack worked

[2021-08-14 17:26:07] mail451 : I'm removing the cert now to start fresh

[2021-08-14 17:26:14] bin4ry : it is now the same as the fcc hacking

[2021-08-14 17:26:27] bin4ry : so it did not copy the file yet

[2021-08-14 17:26:39] mail451 : When I checked in the app the cert was disabled and would not let me activate it.

[2021-08-14 17:26:58] bin4ry : yes

[2021-08-14 17:27:07] fredmicrowave : Fwiw, dronehack just worked for M2 on the app side but gave error 13010 on the drone side. Also : I tried to delete DH (win10) app after running it, but it wouldn´t let me, because it was "in use" . Task manager shower no running app. After restaring the PC I could delete it, start it again and got cert succesful. Go4 shows cert, but err 13010. Just for info, no hurry. Edit: Cert activation in go4 was made offline

[2021-08-14 17:30:23] flymymavic : Didnt work mate

[2021-08-14 17:30:36] bin4ry : button press ?

[2021-08-14 17:30:41] mail451 : Weird, so after this:

[2021-08-14 17:30:44] mail451 :

[2021-08-14 17:31:01] mail451 : I reboot the drone, connect to the app and still see the cert (but is disabled)

[2021-08-14 17:31:10] mail451 : will try to repatch now

[2021-08-14 17:39:41] mail451 : no dice, still same error message account not logged in

[2021-08-14 17:41:19] fredmicrowave : Did you try to restart PC and run another DH instance ?

[2021-08-14 17:42:23] mail451 : No, will definitively try that now.

[2021-08-14 17:51:14] dronepilot : Any work for you guy’s? Still no joy : /

[2021-08-14 17:54:32] dronepilot :

[2021-08-14 17:55:18] cs2000 : Seriously, the only way DJI could have done this is what they did, but in doing so they've nuked all genuine unlocks too, they were clearly VERY unhappy with this hack, which makes me VERY happy. :clap: Also, hats off to @bin4ry for sticking with this, just be patient, he will get there.

[2021-08-14 17:55:41] cs2000 : I'd have loved to have been a fly on the wall in their offices today

[2021-08-14 17:55:58] loaderbull : Shots fired over in ~general dear me. This will get sorted i’m sure :ok_hand:

[2021-08-14 17:58:07] cs2000 : Not wanting to start an argument with anyone, so il stay quiet on the ~general post, but just wait and it will be sorted. @bin4ry has proven locally it works, just automating it is an additional step that takes time when DJI throw spanners in the works

[2021-08-14 18:02:43] loaderbull : Agreed, i know this is being worked on and i know @bin4ry will be honest with where we stand. I haven’t been online with any of my drones yet so certs should be ok in flight mode for my test flight later?

[2021-08-14 18:03:27] lolo780 : Yes, mine still working.

[2021-08-14 18:03:44] amurmurmur : I cant either install or remove certs :confused:

[2021-08-14 18:04:08] amurmurmur : DJI FPV

[2021-08-14 18:35:03] bin4ry : Air2S should be working again my testunit is fine now

[2021-08-14 18:35:15] originaldobo007 : :+1::skin-tone-3:

[2021-08-14 18:35:56] mail451 : Ok, I will try Air 2

[2021-08-14 18:36:47] bin4ry : air2 will not

[2021-08-14 18:36:50] bin4ry : air2s only for now

[2021-08-14 18:36:55] bin4ry : i did not get to the air2 sorry

[2021-08-14 18:37:23] bin4ry : but the method should be the same, so i am pretty sure it will work on them all. i could confirm air2S unit myself now

[2021-08-14 18:37:31] mail451 : No worries. Let me know if I need to test something.

[2021-08-14 18:37:33] bin4ry : but i need to finish the others tomorrow

[2021-08-14 18:38:00] cs2000 : Time for a very well earned beer @bin4ry

[2021-08-14 18:38:09] bin4ry : i need some sleep lol

[2021-08-14 18:38:12] bin4ry : but this method is nice

[2021-08-14 18:38:19] bin4ry : let me explain for everyone interested

[2021-08-14 18:38:24] loaderbull : Nice one @bin4ry :ok_hand:

[2021-08-14 18:39:02] mail451 : Absolutely, du must schlaffen :slightly_smiling_face:

[2021-08-14 18:42:19] bin4ry : dji fly sets the USERID. the cert is a legitiame cert from dji. it is not stolen but the key was reverse eng'ed. we can sign it ourselves. this cert has certain values that must be matched, value 1 is the FC-Serial number (easy one) value 2 is the DJI pilot userID. here come the problem, the userID is set by DJI FLY. the cert can ONLY work with a userid (if none is set the cert cannot work, NO CERT can work). so what happened today? DJI re-issued ALL pilot userIDs and stopped the way i was retrieving them. so what is the fix? luckily i have root on all drones and i am making use of it, i have create a script which runs (exactly like the FCC mods) automatic on drone boot. This script sets the userid. so now when we issue a cert for a FAKE userid, dronehacks userid you can call it. this is always the same. then our script will run on your drone and set the userid and next it will automatically ativate the cert. just like magic. you could even stay online (which i would not recommend, we saw what happened). i have finished this implementation on the dji air2S (only the S model for now!) tested here and the cert comes active again without a problem. tomorrow i will do a flying test too and also will add the other drones to the same method

[2021-08-14 18:43:02] m4x : user id in this acts as a per-user salt for the fc sn

[2021-08-14 18:43:14] originaldobo007 : Fucking brilliant.

[2021-08-14 18:43:28] bin4ry : i try to be honest and open here. i really did NOT think they would issue new userIDs for EVERYONE on the planet. they even invalidated their OWN certs this way and re-issued them

[2021-08-14 18:43:29] originaldobo007 : You deserve a case of beer.

[2021-08-14 18:43:33] m4x : i vote 0x1337

[2021-08-14 18:43:36] m4x : for the memes

[2021-08-14 18:43:45] loaderbull : Fair play to you @bin4ry well done!

[2021-08-14 18:44:17] cs2000 : Theirs going to be quite a few officially unlocked pilots super pissed today that they cannot complete paid work because of this switcheroo of pilot ID's

[2021-08-14 18:44:30] m4x : heh ye

[2021-08-14 18:45:49] bin4ry : well if you have the offical unlock your account has the updated cert

[2021-08-14 18:45:56] bin4ry : so for the pilots it is only a problem if being offline

[2021-08-14 18:46:01] bin4ry : but then the id would not hav echanged

[2021-08-14 18:46:10] bin4ry : so official pilots are not really impacted

[2021-08-14 18:46:24] bin4ry : i have put the news on the homepage too

[2021-08-14 18:46:55] originaldobo007 : Get some sleep binary. :beers:

[2021-08-14 18:47:25] bin4ry : but thats the technical part for you

[2021-08-14 18:48:53] bin4ry : i stopped payments completely, and i wrote nearly every affected customer a message to explain it as best as i can. everyone until now is ok with waiting. as as we run a legitimate business there is no fear. everyone can get the money back if they want, but until now one 1 person wanted a refund. everyone else is happy to wait if we can fix it.

[2021-08-14 18:48:56] m4x : in the end i think thats the better impl anyway

[2021-08-14 18:49:33] bin4ry : i think so too

[2021-08-14 18:49:43] originaldobo007 : It’s actually IMPROVED.

[2021-08-14 18:49:53] bin4ry : if i get it nicely done on every drone then dji cannot stop it, online offline does not matter, only the firwmare version matters then

[2021-08-14 18:49:59] m4x : its the only thing dji couldve done without new fw anyway

[2021-08-14 18:50:02] bin4ry : ok cu tomorrow guys.

[2021-08-14 18:50:03] m4x : and it fixes that

[2021-08-14 18:50:04] originaldobo007 : Frankly, there would be a few small road bumps. That’s expected.

[2021-08-14 18:50:05] m4x : gn8 mate

[2021-08-14 18:50:20] lolo780 : Refund? Your efforts deserve more purchases.

[2021-08-14 18:50:34] m4x : _he will be back_

[2021-08-14 18:50:37] m4x : :see_no_evil:

[2021-08-14 18:51:33] originaldobo007 : This picture brought to you by Drone-Hacks:

[2021-08-14 19:13:46] tsun : Is the public key used for verification of certs stored on the drone, or in the app?

[2021-08-14 19:14:53] tsun : I'm surprised that DJI didn't just revoke it instead of playing with userids

[2021-08-14 19:20:38] lolo780 : DJI devs working OT

[2021-08-14 19:26:00] quad808 : I can speak to this, at least about bin4ry. I have never known a harder working, straight up individual as he is. All of us associated with DH are....proud to be a part of the team. Not to worry. But I am super suprised that DJI took such drastic measures this quickly.....we all know there are DJI spies all over this community. You never know who they may be.....

[2021-08-14 19:29:11] originaldobo007 :

[2021-08-14 19:29:14] rickw001 : I've been laid back,great job guys

[2021-08-14 19:30:30] originaldobo007 : DJI Devs are like, “Honey, I have to go into the office this weekend :cry:”

[2021-08-14 19:30:42] m4x : @mrmarecki for the nfz upgrade process its on the linux part, handled by dji_flight. I expect another copy in the FC, standard elliptic curve bs. I don't know if the FC actually verifies it tho, but i'd expect so. They can't revoke it without a fw update, their change works without a fw update, but its easy to get around.

[2021-08-14 19:31:21] mail451 : Just out of curiosity, has there ever been a DJI spy that was caught here?

[2021-08-14 19:31:40] m4x : who cares about dji spies

[2021-08-14 19:31:45] m4x : consider everything here pub info

[2021-08-14 19:32:04] m4x : if its not for the public ,its not talked about here

[2021-08-14 19:33:14] quad808 : so for now....if your cert was working AND you have stayed offline with your flying app, continue to do so and all will continue to work fine. Don't logout of your flying app or allow internet connection, your userid will change. Brilliant fixes are in the works, but bin4ry needs to sleep too...hahahahaha!

[2021-08-14 19:33:26] m4x : Yea just Server side stuff changed

[2021-08-14 19:33:33] originaldobo007 : Here’s the number one DJI spy likely here:

[2021-08-14 19:33:36] originaldobo007 :

[2021-08-14 19:33:51] m4x : But fw update or not, both ways would kill all legitimate certs

[2021-08-14 19:34:04] m4x : Maybe they have to bite the bullet twice now

[2021-08-14 19:34:09] m4x : :rolling_on_the_floor_laughing:

[2021-08-14 19:35:22] tsun : that would be fun for people with legitimate unlocks :slightly_smiling_face:

[2021-08-14 19:35:49] m4x : it already has been

[2021-08-14 19:35:55] m4x : but cant stand on one leg :wink:

[2021-08-14 19:37:12] m4x : them not straight up doing a fw update is 1. bandaid or 2. they play a game with us

[2021-08-14 19:38:28] m4x : at this point might need to update "recommended fw vers" tho

[2021-08-14 19:39:33] m4x : for mini 2, the current one at the time of writing will probably be the "golden ver"

[2021-08-14 19:39:57] tsun : they likely are afraid that if they just change the key without patching the way it was obtained it might just happen again

[2021-08-14 19:40:26] m4x : thats the name of the game

[2021-08-14 19:40:55] m4x : binary basically said to them "we dont play that game" doing the fuck off with server side bs

[2021-08-14 19:41:14] m4x : the next move is theirs

[2021-08-14 19:41:50] quad808 : forced firmware update? They have only done one, for the Spark battery issue when Sparks where falling from the sky

[2021-08-14 19:42:07] m4x : essentially, but i have working app patches

[2021-08-14 19:42:11] m4x : which can deal with that

[2021-08-14 19:42:17] m4x : and also dji fly replacement for worst case

[2021-08-14 19:42:30] quad808 : Nice!

[2021-08-14 19:43:04] m4x : dji sdk apps werent affected by their change btw as far i can tell

[2021-08-14 19:43:16] m4x : i guess the app just always updated it (the id given from the endpoint)

[2021-08-14 19:43:35] m4x : sdk apps dont do the login shenanigans tho and rely on already authenthicated

[2021-08-14 19:43:58] m4x : unless they handle that specifically i guess

[2021-08-14 19:47:31] m4x : > forced firmware update? They have only done one, for the Spark battery issue when Sparks where falling from the sky Tbh tho, at that point, i'd recommend people to updating to that and fuck off with hacks lol, or fix it in the hacks (if doable)

[2021-08-14 19:55:53] loaderbull : For those with the Air 2S - removed cert as was greyed out. However cert still there, and still greyed out....anyone?

[2021-08-14 20:05:34] originaldobo007 : Did you restart the drone?

[2021-08-14 20:06:22] loaderbull : Yes, i tried it on Smart Controller, no warning about account, but using Phone it says Account not Logged in

[2021-08-14 20:08:51] loaderbull : Looks like it is greyed out anyway, then activates when you tap the slider

[2021-08-14 20:09:36] loaderbull : But as i said no warning on SC, only on Phone

[2021-08-14 20:15:30] quad808 : so @loaderpoo all working or not working? confused

[2021-08-14 20:22:43] dronepilot : Certificate working again?

[2021-08-14 20:38:50] quad808 : Air2s should be good to go, rest will be tomorrow

[2021-08-14 20:39:57] quad808 : If you have a currently working cert, keep the app off-line (which should be done anyway) and no changes are needed for you

[2021-08-14 21:21:03] azerbaijan : if i made swiftbackup of my current djy fly app (not been online after hack) and something went wrong and it connects to wifi, restoring backup return uid to old?

[2021-08-14 21:23:36] loaderbull : @quad808 not working no mate

[2021-08-14 21:24:27] loaderbull : I am about to give it another shot now

[2021-08-14 21:26:22] loaderbull : But i wasn’t on latest FW

[2021-08-14 21:26:33] azerbaijan : you should do other one,which turn on wireless,when app closes

[2021-08-14 21:29:54] quad808 : Since DJI made global changes to user ids, once the app goes online, you will get a new userid, making all current certs invalid, even DJI issued ones. If you have legit DJI certs, you will have to re-import them. All certs are issued based on user id's, which is checked in the app, since DJI makes you always be logged in.

[2021-08-14 21:30:59] loaderbull :

[2021-08-14 21:31:09] loaderbull : That’s what i get @quad808

[2021-08-14 21:32:51] quad808 : what model drone?

[2021-08-14 21:36:24] loaderbull : Air 2S

[2021-08-14 21:37:09] loaderbull : Tried latest FW but still no go. Going back one FW as i can get FCC.

[2021-08-14 21:39:57] loaderbull : And yes i’m logged in :man-shrugging::skin-tone-2:

[2021-08-14 21:43:47] quad808 : I would say, wait until bin4ry can get some much needed rest and he will tackle a fix, so no worries.

[2021-08-14 21:47:14] loaderbull : Yeh i’m in no rush. I know bin4ry will give it some attention. Was looking forward to my first 500 pluser :grin:

[2021-08-14 22:17:03] loaderbull : Just as an aside - it is fine on the M2P, unlocking license is checked and installed. Just Air 2S that it is greyed out.

[2021-08-14 22:21:01] heresmydron : i guess "account not logged in" is a crappy way of saying "youre not logged in with the account tied to the certificate youre selecting"

[2021-08-14 22:39:28] loaderbull : I think you’re right. Just letting bin4ry know as he has fixed it for the Air 2S but as mine isn’t playing ball..will take my M2P out tomorrow so looking forward to that along with my 9 year old :slightly_smiling_face:

[2021-08-14 23:44:38] monkeyman : try with mini2 with SC and default RC, different tablet, still: account not login

[2021-08-15 00:29:48] dronepilot : DH certificate is down 3 birds are grounded : / Bought today a new license for a new bird and bam grounded as well.

[2021-08-15 02:41:53] quad808 : Patience. Time differences means people are sleeping. DH will get you back in the air in no time.

[2021-08-15 02:49:46] lolo780 : M2P, 10.9k ft, stock battery, flying offline.

[2021-08-15 04:34:23] monkeyman : Using my older dji fly on android: IT STILL WORKS!!

[2021-08-15 04:34:43] monkeyman : Both air 2 and mini 2 both unlock still work

[2021-08-15 04:43:17] monkeyman : Using dji fly 1.4.0

[2021-08-15 04:47:08] monkeyman : I enable local data mode

[2021-08-15 05:44:30] mel69hash : With latest MM2 FW CE guys can still retain the FCC hack as per the back bottom button double press but not the height limit and NFZ.

[2021-08-15 05:47:25] bin4ry : good morning mates

[2021-08-15 05:49:04] bin4ry : i just came back from test flying :slightly_smiling_face: if anyone with air2, air2s is awake please test the current files on the server (just re-do the hack). (i am not sure if it works with the 1.20 but i think so). also mavic 2 the fix works too. news shortly. all looks promising, this also will not be "nukeable" by dji. (atleast if you do not update firmware / app whatever, you understand)

[2021-08-15 05:49:12] bin4ry : so if anyone wants to test with me then write me please

[2021-08-15 05:49:16] bin4ry : air2 and air2s for now

[2021-08-15 05:49:19] bin4ry : maybe fpv too

[2021-08-15 05:49:25] bin4ry : i can push the button on that one

[2021-08-15 05:49:27] bin4ry : and mavic 2

[2021-08-15 05:49:30] bin4ry : just write me

[2021-08-15 05:49:33] bin4ry : i worked through the night

[2021-08-15 05:49:36] bin4ry : lol

[2021-08-15 05:55:34] sincoder : air2 ready for test

[2021-08-15 05:59:02] bin4ry : redo the cert hack please in 1.20

[2021-08-15 06:00:18] bin4ry : after the hack the cert will show activate and not active sometimes

[2021-08-15 06:00:37] bin4ry : depends on the sync button. it is only optical problem nothing else

[2021-08-15 06:52:22] czipis : mini 2 - does the new temporary method show generated cert in the dji fly app? I did the hack, activated with button press, but when starting app certificate list is empty.

[2021-08-15 06:52:49] bin4ry : mini2 is not fixed yet

[2021-08-15 06:52:55] bin4ry : i work through them 1 at a time

[2021-08-15 06:53:16] bin4ry : the cert should always show normally

[2021-08-15 06:53:50] bin4ry : but i will figure it out, maybe i deactivated it this night, before i got some sleep i was doing some modifications whic hmight have caused this

[2021-08-15 06:54:14] czipis : ah, I see. take your time. I just thought mini2 was the first you corrected.

[2021-08-15 06:54:39] bin4ry : i thought at first, but it needs some more love

[2021-08-15 06:54:40] bin4ry : :slightly_smiling_face:

[2021-08-15 07:22:48] heresmydron : air2 failing to install the certificate here. Console shows `Error: False Failed, please start again`

[2021-08-15 07:23:01] heresmydron : i was able to remove the old certificate but fails to install a new one

[2021-08-15 07:23:07] heresmydron : bird is on 0120

[2021-08-15 07:23:08] bin4ry : please make sure to have dji assistant 2 for mavic installed

[2021-08-15 07:23:13] heresmydron : im on linux

[2021-08-15 07:23:17] bin4ry : ok

[2021-08-15 07:23:38] bin4ry : please show me the full log

[2021-08-15 07:24:03] heresmydron :

[2021-08-15 07:24:16] heresmydron : terminal where i launch the app is empty

[2021-08-15 07:24:29] bin4ry : yah

[2021-08-15 07:24:31] bin4ry : look in homefolder

[2021-08-15 07:24:33] bin4ry : .dronehacks

[2021-08-15 07:25:17] heresmydron : gotcha ill dm you the log in case there;s some sensitive info there :slightly_smiling_face:

[2021-08-15 07:53:26] monkeyman : @bin4ry I cannot buy new license for my ma2s

[2021-08-15 07:53:32] monkeyman : Please reopen

[2021-08-15 07:53:47] bin4ry : @akbardotinfo it is closed by intention

[2021-08-15 07:53:56] bin4ry : please wait for fix then shop will be reopen

[2021-08-15 07:53:57] bin4ry : :slightly_smiling_face:

[2021-08-15 07:54:01] bin4ry : fix is nearly ready

[2021-08-15 07:54:25] monkeyman : Ok, I’ll try with my ma2 :ok_hand:

[2021-08-15 08:10:14] monkeyman : So, do I need to reinstall on my mavic 2 zoom (firmware .100) ?

[2021-08-15 08:12:40] bin4ry : no

[2021-08-15 08:12:56] bin4ry : only reinstall hack

[2021-08-15 08:12:56] bin4ry : do not reinstall firmware

[2021-08-15 08:13:10] c050351 : ERROR - unexpected indent (helper.py, line 79)

[2021-08-15 08:14:01] bin4ry : whoch drone?

[2021-08-15 08:14:11] c050351 : air2s

[2021-08-15 08:22:15] bin4ry : @c050351 is fixed

[2021-08-15 08:22:20] bin4ry : please restart DH app

[2021-08-15 08:22:30] bin4ry : use firmware 2040 fir air2s

[2021-08-15 08:26:56] c050351 : ok

[2021-08-15 09:17:28] mail451 : Woohoo :tada::tada: Mavic Air 2 works now!

[2021-08-15 09:18:42] mail451 : I live right in the middle of the city, and with 2 NFZs drone did took off.

[2021-08-15 09:24:01] heresmydron : @mail451 what firmware are you on?

[2021-08-15 09:25:18] mail451 : 0610

[2021-08-15 09:28:01] mail451 : Heh when I go on the app the cert gets disabled

[2021-08-15 09:28:13] mail451 : but can enable it

[2021-08-15 09:28:41] mail451 : <https://dji-rev.slack.com/archives/C015JMNVAGG/p1629007237301300>

[2021-08-15 09:36:26] amurmurmur : the license is on by default

[2021-08-15 09:36:33] amurmurmur : Does it mean to need for the DJI FLY APP?

[2021-08-15 09:41:45] amurmurmur : do you guys have a software limit of 500m in the app?

[2021-08-15 09:42:17] amurmurmur : But drone can go beyong that right ?

[2021-08-15 09:49:36] bin4ry : yes

[2021-08-15 09:50:17] bin4ry : you can fly on nfz, but for takeoff you HAVE TO use the app button . Stick command will not work to take off in NFZ. App takeoff button works :)

[2021-08-15 09:51:27] amurmurmur : but for FPV I dont think you can take off from the app

[2021-08-15 09:54:34] bin4ry : for fpv it is not a problem

[2021-08-15 09:54:42] bin4ry : you don’t need app anymore for fpv

[2021-08-15 09:54:46] bin4ry : i removed that need

[2021-08-15 09:54:54] bin4ry : you can just apply now on dronehacks app

[2021-08-15 09:55:03] bin4ry : then go to nfz or fly higher than 500

[2021-08-15 09:55:09] bin4ry : without connecting fly

[2021-08-15 10:00:13] amurmurmur : but in the goggles its still 500 meters

[2021-08-15 10:00:21] amurmurmur : but it will be ignored by the drone right?

[2021-08-15 10:34:40] d95gas : @bin4ry Quick question about the new process for applying the Cert using the butt button sequence. Is this the same sequence as the FCC mode ? or different sequence, in order that you can activate FCC and Install the cert? No hurry to answer, you have enough on your plate at the moment, was just a thought whilst I was out being walked by the pooch :slightly_smiling_face:

[2021-08-15 10:43:05] bin4ry : @amurmurmur the limits that you see are disabled, just try it :slightly_smiling_face:

[2021-08-15 10:43:24] bin4ry : @d95gas i do not have mini2 working yet. Mavic2, Air2,Air2s, FPV

[2021-08-15 10:43:47] bin4ry : mini2 is next on the list but acts up currently. maybe i just cannot think straight, i will definetly continue to work on the minis. but they won't be onlinefor nfz and height removal.i will udpate the blog post shortly

[2021-08-15 10:57:47] d95gas : no problem **Bin4y**, I have the cert on it and have made sure I am firewalled and in Airplane mode when flying. You need to rest bud....... Tired brain just leads to silly mistakes. I am sure everyone is happy to wait. You need rest my friend, then come back when refreshed :+1:

[2021-08-15 11:42:32] fredmicrowave : Worked great on M2p . Cert already activated, no login necessary. NFZ from NLD still active. Alt not tested yet. I love the 27000km circle radius :smile:

[2021-08-15 11:52:50] dronepilot : @fredmicrowave did the certificate work for you on the M2? For me keep getting user error. It does instal normal at DH app.

[2021-08-15 11:53:47] bin4ry : @rgf8aerial you need to do it NOW. not before. it is fixed now

[2021-08-15 11:55:25] dronepilot : Okay will redo now

[2021-08-15 11:56:16] bin4ry : i am releasing 1.21 now

[2021-08-15 11:56:29] loaderbull : @bin4ry so just re-patch cert for M2? Mine was working from original patch but now we can use new method over the top?

[2021-08-15 11:56:56] bin4ry : yes you can use it over the top. but if you ar egood with the original you can also use that

[2021-08-15 11:57:15] bin4ry : the new hack needs adb to be properly setup on the computer

[2021-08-15 11:57:20] bin4ry : just like the fcc hack for mavic 2

[2021-08-15 11:57:34] bin4ry : it takes longer than before

[2021-08-15 11:57:38] bin4ry : but now no mire userid of dji

[2021-08-15 11:57:41] bin4ry : wait for the blog update

[2021-08-15 11:59:00] loaderbull : Also, Air 2S latest FW 2040 for Alt/NFZ but this has no FCC hack is that correct? The previous FW 1690 cannot be used for Alt/NFZ no?

[2021-08-15 12:00:39] fredmicrowave : @rgf8aerial Yes it worked after installing it again .

[2021-08-15 12:00:52] dronepilot : @bin4ry do i need to instal a new DH app to instal the certificate on a M2 bird?

[2021-08-15 12:01:09] loaderbull : 1.20 was working

[2021-08-15 12:01:13] dronepilot : I need to uninstall the old certificate?

[2021-08-15 12:01:25] bin4ry : no

[2021-08-15 12:01:28] fredmicrowave : Not necessary for me

[2021-08-15 12:01:29] mail451 : Amazing, thanks for your continued support @bin4ry

[2021-08-15 12:01:32] loaderbull : Just re-patch

[2021-08-15 12:01:38] bin4ry : @loaderpoo fcc is available now too

[2021-08-15 12:01:40] bin4ry : wiat for it

[2021-08-15 12:02:03] loaderbull : I shall wait for the nod then! Nice work @bin4ry

[2021-08-15 12:02:41] loaderbull : Will take both M2 and Air 2S out later today :slightly_smiling_face:

[2021-08-15 12:08:32] bin4ry : Fixed, please re-install certificate from 1.21 if you have problems! (mini and mini2 work ist still ongoing, pelase wait for updates. Indian users can use 15m hack without problems!) <https://drone-hacks.com/blog/post/500>

[2021-08-15 12:10:50] amanita : In my android tablet "Flight Restrictions" it is gray and no options are available. On my android phone everything is οκ. The certificate also applies to the tablet or not?

[2021-08-15 12:15:27] loaderbull : Bin4ry mentioned ignore the greyed out active status of cert. Apply new one using new 1.21 DH software as above

[2021-08-15 12:18:45] dronepilot : for me still no good M2 DH app still on 1.20 download.

[2021-08-15 12:18:53] amanita : I can not download 1.21 still gives 1.20

[2021-08-15 12:19:06] bin4ry : wait i clear chache

[2021-08-15 12:20:06] bin4ry : pleade check now again, i clear the webshop cache

[2021-08-15 12:20:12] bin4ry : so it should deliever the current state now

[2021-08-15 12:21:02] amanita : Ok now!!!!

[2021-08-15 12:21:07] dronepilot :

[2021-08-15 12:22:08] bin4ry : ok i will vanish now here

[2021-08-15 12:22:18] bin4ry : please if any issues use support, i need to get some sleep

[2021-08-15 12:22:20] bin4ry : :smile:

[2021-08-15 12:23:17] loaderbull : Well done Bin4ry

[2021-08-15 12:23:23] d95gas : Thanks for all the mega work Bin4ry ...... Now go chill, grab a beer, stick the feet up and watch some brain numbing movie

[2021-08-15 12:23:38] heresmydron : round of applause for bin4ry for pulling an all nighter for the team

[2021-08-15 12:23:55] loaderbull : :clap:

[2021-08-15 12:24:07] heresmydron : :clap::clap::clap:

[2021-08-15 13:02:52] amurmurmur : Nice views :slightly_smiling_face:

[2021-08-15 13:03:12] amurmurmur : DJI FPV about 2km high :slightly_smiling_face:

[2021-08-15 13:15:21] loaderbull : Nice! FCC hack not working on Air 2S with latest firmware;

[2021-08-15 13:15:28] loaderbull :

[2021-08-15 13:16:41] loaderbull : Oh, neither is cert hack. Exactly the same error.

[2021-08-15 13:23:36] loaderbull : Cert hack now installed - not sure why it wouldn't initially. However FCC will not install no matter what i do.

[2021-08-15 16:32:31] lolo780 : 1.21, installed on M2P, working nicely.

[2021-08-15 16:36:25] fredmicrowave : I don´t know if there is a real difference for M2p between 1.20 and 1.21 ?

[2021-08-15 16:37:33] lolo780 : Dunno

[2021-08-15 16:39:37] fredmicrowave : Going to try 1.20 rn . If it works, no need to break it :)

[2021-08-15 17:21:55] loaderbull : 1.21 does the cert different @fredmicrowave

[2021-08-15 17:22:03] loaderbull : Loads it differently

[2021-08-15 17:22:24] loaderbull : To bypass DJi’s block on current certs

[2021-08-15 17:23:11] loaderbull : If you loaded the 1.20 cert and stayed offline it works. But if you went online chances are that is now defunct.

[2021-08-15 18:15:11] droneabc : I just get bird map not found and not stored locally error, bummers

[2021-08-15 18:16:40] lolo780 : Which ac?

[2021-08-15 18:18:54] dronepilot : v1.21 certificate works perfectly M2 online or offline no need to input dji user id or password. Will try tomorrow Air2, 2s and mini 2.

[2021-08-15 18:18:54] kilrah : means you're not connected to internet

[2021-08-15 18:19:02] droneabc : Mp2 pro, it sees it, shows it on the left, and knows its there, its appears its not able to download a list of birdmap from drone-hacks , by looking that the log on the right.

[2021-08-15 18:20:04] droneabc : Its online, I used the firmware button in the DH app to download newer firmware.

[2021-08-15 18:21:17] droneabc : I thought maybe the DH server list of birds may be down, I'll check to see if firewall is blocking program, but i set it as a trusted app, I'll double check.

[2021-08-15 18:27:13] heresmydron : here's the url for hte compatibilty map, if you can access that with your browser, theres seomthing else going on with your firewall <https://drone-hacks.com/compatibility/compatibility.json>

[2021-08-15 18:28:54] droneabc : Thank you for that, will check.

[2021-08-15 18:31:35] dronepilot : MA2, 2s and mini 2 anyone nows if working the certificate? Fcc on this birds works with all firmware?

[2021-08-15 18:34:33] loaderbull : Air 2S cert works, FCC not

[2021-08-15 18:34:48] loaderbull : DH are aware that FCC doesn't work

[2021-08-15 18:35:22] loaderbull : Mini 2 is not working as from latest info as per bin4ry

[2021-08-15 18:36:49] loaderbull : That is with latest (2040) FW for Air 2S btw

[2021-08-15 19:47:46] droneabc : I know it says to use a firewall to keep it offline. But then I lose maps, what i usually did was use a hosts file blocking dji all and just allowing maps to not blocked. Is this OK to do? I haven't seen question asked yet. Just asking because I don't want to be the guy who accidentally messes it up for others. I have been using droner69 DJI_GO_4_Android_AdAway_Hosts_Block_List.txt

[2021-08-15 19:52:21] heresmydron : maps can be precached. or you can block everything except mapbox in the hostfile

[2021-08-15 19:52:42] heresmydron : <https://github.com/444A49/minifindings#offline-mode-with-maps>

[2021-08-15 19:54:12] droneabc : Thank you, you helped twice today, DH was indeed blocked by my firewall from some reason. Your a very helpful person.

[2021-08-15 19:55:27] fredmicrowave : Just tried 1.20 on M2P . Works flawlessly ! I just fly normally using Litchi, don´t even need to start GO4. Just ran Go4 the first time on a different device, hit "Sync" closed it, and now it´s freedom ! Thanks a lot @bin4ry. Not that I fly crazy high, but there is a lot a mountains here, and 500m is just not enough.

[2021-08-15 19:57:18] loaderbull : I just tried on Air 2S and hit that 500M limit. App 1.21, will try a re-patch again.

[2021-08-15 19:57:50] droneabc : I thank @bin4ry as well. He's the man.

[2021-08-15 19:59:21] loaderbull : Using Smart Controller may i add^^^

[2021-08-15 20:12:40] loaderbull : Re-patch, kept SC offline and it worked...

[2021-08-15 20:14:17] quad808 : way to go mate!

[2021-08-15 20:15:20] quad808 : I think @bin4ry is dreaming of DJI code right about now....

[2021-08-15 20:15:57] loaderbull : First over 500M flight, hope to get some pics tomorrow now :slightly_smiling_face:

[2021-08-15 21:49:40] measo420 : Will work with a NLD perm root board too? Not sure if it would mess with root or if it would not install on one for some reason

[2021-08-15 22:48:07] austinc3030 : Hacking my Air 2 now. Hoping to put her up above 500m for the first time.

[2021-08-15 22:54:32] austinc3030 : So I just applied the NFZ/Alt Limit hack on the air 2, it said it would ask for my DJI creds but it never did?? Guess its time to give it a shot

[2021-08-15 22:57:52] measo420 : I think it reads it from aircraft? I didn't have to physically enter mine.I wonder what would happen if I changed my login for the go4 app as I honestly don't remember the password anymore

[2021-08-15 23:14:29] loaderbull : No credential needed

[2021-08-15 23:28:17] lolo780 : The new one doesn't ask for your DJi login

[2021-08-15 23:29:02] austinc3030 : Cool. Just flew and went way higher than i thought 3/4 battery would go

[2021-08-16 06:10:40] 503496897 : Fpv doesn't work

[2021-08-16 06:16:44] oakley75 : Any trick to getting the rc-n1 remote to flash with dh? Is it really not able?

[2021-08-16 07:11:59] 503496897 : Fpv

[2021-08-16 07:13:34] loaderbull : I had that last night for installing cert. I restarted drone and pc and tried again and it worked. However i got the same error for FCC too but that was due to a server file change and it works this morning.

[2021-08-16 07:23:50] bin4ry : Yep i fixed it, the FCC was a little mistake i made. obviously i was too tired yesterday

[2021-08-16 07:24:19] bin4ry : @503496897 please do as @loaderpoo said. Restart comptuer rstart drone (2 times preferred) then do it again

[2021-08-16 07:24:30] bin4ry : make sure you have "dji assistant 2 for fpv" installed to your computer

[2021-08-16 07:24:41] bin4ry : and no firewall or antivirus is blocking the software

[2021-08-16 07:25:15] bin4ry : it works, some people here have already done it on the FPV too and showed pictures :slightly_smiling_face: if it fails it is either a bad timing and will work in a consecutive run or a locla driver/firewall/antivirus issue

[2021-08-16 07:34:52] elintnl : @bin4ry, great stuff again, any news about the mini2?

[2021-08-16 07:37:27] bin4ry : just woke up

[2021-08-16 07:37:34] bin4ry : or 1h ago

[2021-08-16 07:38:46] elintnl : ahh, oke then, well goodmorning to you

[2021-08-16 07:40:05] bin4ry : thx :laughing:

[2021-08-16 14:19:18] monkeyman : on MA2S we can change the decent speed to 10/-10, but not in MA2 (yet), I hope DH can found it on MA2

[2021-08-16 14:20:07] casavera4456 : Actually even when you change it to 10/-10 it will not actually do that.

[2021-08-16 14:20:44] monkeyman : really? have you try it yet?

[2021-08-16 14:20:50] monkeyman : will try tomorrow

[2021-08-16 14:20:56] casavera4456 : The only thing that will stick is ascent to 7m/s

[2021-08-16 14:21:02] casavera4456 : I have tried it.

[2021-08-16 14:21:18] casavera4456 : You can increase ascent to 7m/s but that is the only thing that will actually stick.

[2021-08-16 14:21:51] monkeyman : Thansk for the info!

[2021-08-16 14:22:03] casavera4456 : But Air2S default ascent and descent is much faster than Air2.

[2021-08-16 14:23:23] monkeyman : I use the drone for climbing the mountain, so ascent/descent speed is very helpfull to save my battery

[2021-08-16 14:23:42] casavera4456 : default for air 2S is 6/6 in all modes. default for air 2 is ascent 4 descent is like 3.

[2021-08-16 14:24:13] casavera4456 : so basically air2S in default is almost twice as fast...

[2021-08-16 14:24:43] monkeyman : thanks again @casavera4456 :+1::skin-tone-2:

[2021-08-16 14:25:10] monkeyman : so beside the platinum, will try with the ma2s

[2021-08-16 14:25:24] casavera4456 : :thumbsup::skin-tone-3:

[2021-08-16 14:25:48] casavera4456 : The 7m/s in ascent is nice. Descent at 6m/s isn't too bad.

[2021-08-16 14:26:08] monkeyman : yess

[2021-08-16 14:27:01] monkeyman : MP1 - M2 - MA2/S

[2021-08-16 14:38:33] heresmydron : @akbardotinfocheck "gentle mode" here <https://github.com/444A49/ma2findings#gentlebeginner-mode>

[2021-08-16 14:38:57] heresmydron : i managed to get 40km/h descent with those params

[2021-08-16 14:41:11] heresmydron : only differnce is that i use `mode_gentle_cfg_tors_gyro_range_0 50` instead of 100 otherwise when you make the drone turn, it turns violently and its a bit hard to control if youre going fast

[2021-08-16 16:01:43] austinc3030 : Gonna have to try this when I get home. I wish decent was a lot faster on my air 2

[2021-08-16 16:13:25] casavera4456 : Yeah/ that was one of the huge benefits of the Air2S that wasn’t spoken about- the improved ascent descent speeds.

[2021-08-16 18:34:23] loaderbull : @bin4ry what are the chances of DJi releasing a new FW for all these hacks...haha. Also, if they did, can the cert be disabled via FW?

[2021-08-16 18:45:35] lolo780 : New FW or APP could probably disable it.

[2021-08-16 18:46:58] lolo780 : I wouldn't be updating anything from here until it's tested.

[2021-08-16 18:48:43] loaderbull : I assume a FW could yes. I was just curious as to what bin4ry has done different to circumvent DJi’s instant cert fix lol

[2021-08-16 18:49:02] quad808 : yep, especially if you have it working how you want it. It seems to me a side benefit of the DH cert, means that any data that gets sent to DJI would be tied to the DH user id and not your own. No more data tied to your DJI account.

[2021-08-16 18:50:56] quad808 : This, of course, has not been verified yet as far as I know....

[2021-08-16 20:15:10] kilrah : get an fpv, 20m/s climb, 40m/s descent :smile:

[2021-08-16 20:36:04] lolo780 : And no gimbal shaking errors

[2021-08-16 20:45:43] casavera4456 : When does altitude start turning into a negative value?

[2021-08-16 21:10:40] mail451 : When you go lower than the takeoff / home point height

[2021-08-16 21:24:41] lolo780 : At 3277m, altitude flips the sign and then counts back to zero. A reading of -521m is actually +6033m. At 6554m it counts up from zero again, flipping sign at 9831m. At around 10km the DJI barometric sensor maxes out and alt reading slows it's rate of change even if the ac is climbing 10m/s still.

[2021-08-16 21:54:23] monkeyman : Will try today, thanks @heresmydron

[2021-08-16 22:28:39] casavera4456 : Gotcha. That's what I meant. So basically you were 19k ft. Incredible!!! :tada: What battery mod do you have to still have 30% at that height?

[2021-08-16 22:46:48] heresmydron : does anyone know how to get the pilot/user id of a dji account?

[2021-08-16 22:47:55] heresmydron : its not the uid in the url parametesr when you login to [dji.com](http://dji.com)

[2021-08-16 22:48:57] casavera4456 : Always fun to add helicopter dash to drone shots when there is a horizon :laughing::rolling_on_the_floor_laughing:

[2021-08-16 22:51:30] lolo780 : Stock M1 battery and a Thunderpower 3s 4500HV pack

[2021-08-17 00:35:40] dronepilot : hahahaha love this idea @casavera4456 Any app to do this heli dash?

[2021-08-17 00:57:11] casavera4456 : I wish there was an app. I just photoshopped out a dash and overlaid it on a couple photos. What makes it funnier is that helicopters shouldn’t be going this high either! :laughing:

[2021-08-17 03:17:31] trickyrickywashere : Does not work on NLD board, bought license when plugged in DH will not ask if I want to use it on drone

[2021-08-17 04:32:17] digdat0 : What does DH say the m2 nld board is? I assume it detects m2 properly, what fw version?

[2021-08-17 04:36:15] bin4ry : it cannot work with this board

[2021-08-17 04:38:18] bin4ry : some very important serial number is missing from the board and thus a licenses cannot be written to it. i have tested it manually with some other customer who has this board. i was not able to get it running, put the original board inside and everything will work

[2021-08-17 06:04:27] 503496897 : Wtf！！！ I paid

[2021-08-17 06:05:55] bin4ry : alipay ?

[2021-08-17 06:06:00] 503496897 : Yes

[2021-08-17 06:06:07] bin4ry : did you click "back to vendor" at the end?

[2021-08-17 06:06:38] 503496897 : I don't remember. ，，，

[2021-08-17 06:06:56] 503496897 : check pls

[2021-08-17 06:07:24] bin4ry : because this happens if not clicked on "back to vendor", i will check give me a second. but it is better to write at [support.drone-hacks.com](http://support.drone-hacks.com) because i am not always checking here

[2021-08-17 06:08:15] 503496897 : Ok， thx

[2021-08-17 06:09:00] bin4ry : please check your account

[2021-08-17 06:09:03] bin4ry : you have 2 orders

[2021-08-17 06:09:07] bin4ry : 25820

[2021-08-17 06:09:10] bin4ry : which is paid

[2021-08-17 06:09:24] bin4ry : 7:44h

[2021-08-17 06:09:37] bin4ry : and 25821 , not paid, 7:57h

[2021-08-17 06:10:07] 503496897 : Both paid

[2021-08-17 06:10:24] bin4ry : 7:57h was not finished

[2021-08-17 06:10:48] 503496897 :

[2021-08-17 06:10:51] bin4ry : in stripe it is not finished, this means the "back to vendor" was not clicked

[2021-08-17 06:10:58] bin4ry : that means the payment is not paid but only reserved

[2021-08-17 06:11:08] bin4ry : and will be returned by stripe inc. to your acccount

[2021-08-17 06:13:23] bin4ry : when you but alipay with stripe, the moeny will be send to stripe, but if you do not click "finish back to vendor" then the money will never reach us, in that cases the money is booked away from alipay to stripe but never from stripe to us. after a while (timeout from stripe) stripe will put back the moeny to your alipay account. normally this is at the same day. sadly we cannot change that, it is implementation from stripe (this is another company doing the payments for us). because alipay does not allow us to do payments ourself.

[2021-08-17 06:14:01] bin4ry : so don't worry, money will be back shortly. payment did not succeed to the end and it will be put back into your account automatically by stripe

[2021-08-17 06:14:08] 503496897 : Ok

[2021-08-17 08:33:33] 503496897 : Mini doesn't work？

[2021-08-17 09:12:47] bin4ry : [drone-hacks.com/birdmap](http://drone-hacks.com/birdmap) mini not listed and updates also include information: <https://drone-hacks.com/blog/post/500> initially we had mini support, but after this incidend not anymore. we still research to make it possible

[2021-08-17 09:22:15] 503496897 : Air2s The propeller stops as soon as I start the motor

[2021-08-17 09:22:36] 503496897 :

[2021-08-17 09:31:49] mail451 : I was able to take off on the latest hack (ma2)

[2021-08-17 09:52:20] 503496897 : "Take off " voice then motor stopped

[2021-08-17 10:37:16] bin4ry : did you use the button in the app and not the stick control? like we write you NEED to use button

[2021-08-17 10:48:34] bin4ry : because exactly this happens when you do not use the button. always use the app button ot start in NFZ, it will work flawless and you can fly without problem. But never use stick control. stick control will not work, the hack works this way. Please test again with app button, i am sure it will work without pooblem :slightly_smiling_face: we also write it on the homepage :wink: <https://drone-hacks.com/unlock-certificate>

[2021-08-17 10:49:09] cadbob : Any Update on MM for NFZ and Altitude? Not sure if I missed posted curious on progress.

[2021-08-17 10:49:27] bin4ry : no sorry no update yet

[2021-08-17 10:49:39] cadbob : K thanks Bin

[2021-08-17 10:54:01] matthijst : @bin4ry could Mini2 users just use the old method? Generate a new certificate if DJI issues new one (so just stay offline)!

[2021-08-17 10:54:05] matthijst : ?

[2021-08-17 10:58:09] bin4ry : currently not, i do not wnat to play dji games. dji issues a new userid every few hours. be assured i work all the time to get it running again on the mini series

[2021-08-17 11:14:10] dronepilot : Air 2, 2s certificate working perfectly?

[2021-08-17 11:18:38] bin4ry : yes. works all fine. but to start in NFZ you need to use button in the app (autostart button) not CSC

[2021-08-17 11:24:08] dronepilot : Nice, thanks. Mini 2 any news on the certificate?

[2021-08-17 11:26:07] bin4ry : literally a few posts up is the answer to both questions :slightly_smiling_face:

[2021-08-17 11:29:31] dronepilot : Thanks just read at DH blog.

[2021-08-17 11:40:32] fredmicrowave : Would a non-dji drone activation be hard to do ? Could be a cool feature.

[2021-08-17 13:27:39] tmbinc : Is there a legitimate use case for this? My worry would be that it would mostly be used for illegally obtained hardware.

[2021-08-17 13:42:13] bin4ry : i see it like @tmbinc. activating would allow the stolen units to be activated, which is not a good thing

[2021-08-17 13:57:05] mefisto : That prevents stealing non-activated drones only, right? Or is there a way for any user to un-activate/blacklist their drone if it got stolen?

[2021-08-17 14:01:28] bin4ry : i am not sure about that, there is a dji care binding with the drone/controller with newer drones. in theory it would allow the drone/controller only to bind with each other except it was removed. so it could be used as a "i lost my device" protection. as you cannot bind another controller. atleast if i remember correct how it worked. anyway, from the other way around. which legal options are there to activate the drones without dji (except for hiding from them ofc).

[2021-08-17 14:05:56] trickyrickywashere : I think there is a blacklist of drones that can't be activated in dji apps could an option be added in DH that first checks a dji list, makes sure its not stolen then can be activated by dh?

[2021-08-17 14:08:38] fredmicrowave : I see it useful for activating new drones only. So you don´t have to connect to their server and accept sharing lots of personal stuff, that will bind you to this drone for the remaining of its life. I you wanted DJI care you would have to go the official way, of course.

[2021-08-17 14:10:58] bin4ry : yes i see. well i do not think dji would open up their blacklist to us :wink: for me it is too much of a thin line to help thieves. i think if you want to activate a new drone without dji knowing you there are better ways (like described before) with a "burner" device and identity :slightly_smiling_face:

[2021-08-17 14:12:04] trickyrickywashere : I feel the same way I wouldn't mind using dji to activate if I was buying DJI care I bought it once never used it still never had a need

[2021-08-17 14:13:27] fredmicrowave : All good :slightly_smiling_face: Was not aware there was that many new stolen drone, but that´s good point.

[2021-08-17 14:21:29] fredmicrowave : Good also as long as DJI doesn´t force you to update FW before activating ...

[2021-08-17 14:36:04] tmbinc : The DJI Care binding, which DJI gradually brings to all drones, is interesting, and I admit I don't fully understand it. Is that so you can't give sell your drone and then claim it as a flyaway?

[2021-08-17 14:36:34] tmbinc : Either way, DJI care is another way where hacktivation would create an incentive for fraud.

[2021-08-17 14:36:51] tmbinc : And keep in mind - the more DJI minds what's going on, the more they will do.

[2021-08-17 18:19:28] monkeyman : update: this setting WORKS! my setting are:

[2021-08-17 18:25:23] monkeyman : btw anyone succeed change battery_type=0 on MA2? mine it cannot be changed

[2021-08-17 18:59:48] edo : This parameter is only available **on firmware 0113 and 0130**. On 0250 onwards it was locked to value `1`.

[2021-08-17 20:35:53] originaldobo007 : Never been able to change it on the Air2S.

[2021-08-17 20:36:46] originaldobo007 : On other birds like P4P/M2 you could change it to type 3. Still gives you percentage, voltage, etc but it wouldn't auto land. Too bad they locked down this shit.

[2021-08-17 20:37:13] originaldobo007 : Now you can do this: bat_enable_smart_bat_landing_protect (set to 0)

[2021-08-17 20:37:18] originaldobo007 : That does stop auto land.

[2021-08-17 20:37:51] originaldobo007 : Also, a nice little trick is to look up the "forearmLED" parameter and change to 0 from like 259 or something.

[2021-08-17 20:38:02] originaldobo007 : That shuts off the annoying rear blinking LEDs

[2021-08-17 20:39:18] heresmydron : ```forearm_led_ctrl|g_config.misc_cfg.forearm_lamp_ctrl default = 239 range = < 0 .. 255 >```

[2021-08-17 20:39:19] heresmydron : ?

[2021-08-17 20:47:17] originaldobo007 : Exactly!

[2021-08-17 20:47:19] originaldobo007 : That one

[2021-08-17 20:47:26] originaldobo007 : Change it to 0

[2021-08-17 20:47:31] originaldobo007 : Turns off the annoying LEDs

[2021-08-17 20:47:49] originaldobo007 : The front ones will still blink

[2021-08-17 20:48:09] originaldobo007 : But at least the rear ones won't have the annoying Christmas-light red green flashing

[2021-08-17 20:48:17] originaldobo007 : It will shut those off.

[2021-08-17 20:49:04] originaldobo007 : Or it shuts off the front ones and the rear ones still blink

[2021-08-17 20:49:17] originaldobo007 : Can't remember - but it makes it better either way.

[2021-08-17 23:35:13] oakley75 : I thought 250 was able. It could be a typo on the wiki, but not certain

[2021-08-18 09:42:51] monkeyman : Thanks!

[2021-08-18 11:30:13] heresmydron : 239 is default value, 238 disables the front leds, 0 disables all leds!!

[2021-08-18 11:30:34] heresmydron : (on a MA2 FYI)

[2021-08-18 11:38:08] 444a49 : mind if i add that to my repo @originaldobo007 @heresmydron?

[2021-08-18 11:38:17] 444a49 : <https://github.com/444A49/ma2findings>

[2021-08-18 11:38:21] 444a49 : with credit fo course

[2021-08-18 11:42:40] m4x : That sounds like a bitmask hm

[2021-08-18 11:42:55] m4x : How many physical LEDs does it have?

[2021-08-18 11:43:15] m4x : Got lights on each arm?

[2021-08-18 11:43:35] mail451 : Ma2? 4 on each arm + 1 on the bottom

[2021-08-18 11:44:11] m4x : I'd think one bit might be for breathing or simliar

[2021-08-18 11:45:13] m4x : 239 0xEF 11101111 238 0xEE 11101110

[2021-08-18 11:45:25] m4x : that leaves 6 bits

[2021-08-18 11:45:37] m4x : lets say 1 bit for each arm

[2021-08-18 11:45:47] m4x : one for breathing, maybe one for blink?

[2021-08-18 11:45:56] m4x : otherwise just "on"

[2021-08-18 11:46:05] m4x : just some thoughts, i dont own one so i cant test

[2021-08-18 11:55:08] heresmydron : that makes sense

[2021-08-18 11:55:12] heresmydron : ill test that later

[2021-08-18 12:12:06] dronepilot : Question everything working pertcfect with air 2 latest firmware certificate + fcc?

[2021-08-18 12:13:16] bin4ry : didn't you ask that yesterday already?

[2021-08-18 12:13:24] bin4ry : answer is still yes

[2021-08-18 12:13:25] bin4ry : :wink:

[2021-08-18 12:13:25] m4x : "are we there yet?"

[2021-08-18 12:13:37] bin4ry : answer was yes yesterday and is yes now :smile:

[2021-08-18 12:13:45] bin4ry : it is yes since sunday

[2021-08-18 12:14:02] m4x : But are we there yet?

[2021-08-18 12:14:06] m4x : :stuck_out_tongue:

[2021-08-18 12:17:10] dronepilot : Thanks @bin4ry will purchase a license now for the air 2.

[2021-08-18 12:17:37] bin4ry : read info here please :

[2021-08-18 12:17:45] bin4ry : <https://drone-hacks.com/unlock-certificate>

[2021-08-18 12:21:07] originaldobo007 : Absolutely! go ahead :slightly_smiling_face:

[2021-08-18 12:21:22] dronepilot :

[2021-08-18 12:21:31] cs2000 : <https://drone-hacks.com/unlock-certificate>

[2021-08-18 12:22:35] cs2000 : Or this lol, Bin4ry keeps linking to one of these two! <https://drone-hacks.com/blog/post/500>

[2021-08-18 12:23:44] bin4ry : sorry :smile:

[2021-08-18 12:25:02] dronepilot : hahaha never mind finishing the purches thanks : )

[2021-08-18 12:26:30] dronepilot :

[2021-08-18 12:26:58] bin4ry : :slightly_smiling_face:

[2021-08-18 14:13:13] trulala69 : @bin4ry Quick question: DJI restricted the parameter ranges alot, would it be possible to hack those ranges open again on the AC?

[2021-08-18 15:06:46] dronepilot : Just a feedback M2P and Air 2 working perfect with the nem certificate everything on line. Great job @bin4ry and @cs2000

[2021-08-18 15:07:46] bin4ry : unlikely, sorry

[2021-08-18 15:37:48] trulala69 : So, basically the ranges are stored in some kind of encrypted table, right? I thought, it would be possible to edit them with root access to the AC ...

[2021-08-18 15:40:26] cs2000 : in simple terms, not encrypted no. But the entire firmware package contains the data and values of the parameters. You cannot edit them without messing up the signature of the file which the drone will then refuse to flash

[2021-08-18 15:52:37] trulala69 : My initial thought was, having root access it would be possible to overwrite the ranges directly on the drone after it's startup via a script or so ... but that would've been too simple ...

[2021-08-18 16:17:58] cs2000 : I dont think its quite possible. Back in the day when MP1 was the newest hot drone, we had a method for unlocking certain parameters, @mathieu.peyrega worked on it. However you didnt have free reign once the FW was flashed. You had to (using a load of special tools and scripts), Extract the firmware, edit the parameters in a text file, copy files into all sorted of folder locations, compile it, spoof the signature check on the drone then test. if your parameter was wrong, you had to build a fresh firmware and repeat the process.

[2021-08-18 17:17:03] trulala69 : Thanks, @cs2000 for the insight ... well, not simple at all ...

[2021-08-18 17:31:36] infinitydrones : Anyone having issues with trying to enable the certificate in the Go4 app?

[2021-08-18 17:31:48] infinitydrones : Thanks for the add btw

[2021-08-18 17:31:50] loaderbull : You dont enable it

[2021-08-18 17:32:31] loaderbull : Install cert using DH app. That is it. No need to take any notice of it in go4/fly

[2021-08-18 17:33:14] loaderbull : That, by all accounts, is just graphical and has no bearing on it being active or not.

[2021-08-18 17:33:35] infinitydrones : I modded my my mavic 2 last week and I tried flying up to 500m, when I reached 500m I was blocked. Had to go in the go 4 and manually enable the cert. Today I modded my other Mavic 2 and found that when try and enable the cert I get an error that it failed

[2021-08-18 17:33:52] infinitydrones : So the mod was upgraded from last week then :smile:

[2021-08-18 17:34:02] loaderbull : Have you used the new cert using 1.21 app??

[2021-08-18 17:34:08] infinitydrones : Yes

[2021-08-18 17:34:22] loaderbull : Before it needed to be enabled i think. Now, it does not.

[2021-08-18 17:35:36] infinitydrones : Perfect, that answers my question as i have 1x mavic 2 pro modded with 1.20 beta that requires the cert to be toggled on and 1x mavic 2 pro that is modded with 1.21 and its does not allow the cert to be enabled (which you've just explained).

[2021-08-18 17:35:49] infinitydrones : I'll give it a test tomorrow when the rain clears up

[2021-08-18 17:37:53] loaderbull : If you remained offline for the 1.20 install it will work ok. However the new 1.21 app and method sorts all that out and the cert does not need to be toggled. It just works. My 1.20 did as you said. But upgraded my 2 birds certs using 1.21 and both are fine. So sounds like you have done everything correct and i hope you enjoy the new found freedom :grin:

[2021-08-18 17:39:23] infinitydrones : Whoo hoo! Gonna fly it like i STOLE it!!

[2021-08-18 19:47:55] heresmydron : regarding `forearm_led_ctrl|g_config.misc_cfg.forearm_lamp_ctrl` it is indeed a bitmask

[2021-08-18 19:48:00] heresmydron : most of hte bits have no effect

[2021-08-18 19:48:01] heresmydron : but

[2021-08-18 19:48:50] heresmydron : ```0 0 0 0 0 0 0 0 N/A N/A N/A N/A N/A back leds N/A front leds```

[2021-08-18 19:49:39] heresmydron : so 5 = both leds, 4 = only back leds, 1 = only front leds, 0 = all off

[2021-08-18 19:49:51] heresmydron : on MA2 FYI

[2021-08-18 19:53:02] m4x : Still better than arbitrary magic numbers!

[2021-08-18 19:53:47] m4x : I guess it's called forearm for legacy reasons?

[2021-08-18 19:55:22] heresmydron : what drone has... forearms?

[2021-08-18 19:55:33] heresmydron :

[2021-08-18 19:55:55] m4x : that would be the front half depending on the orientation of the FC

[2021-08-18 19:57:03] m4x : they basically have the motors in their hands :stuck_out_tongue:(socket where they are mounted on)

[2021-08-18 19:57:12] m4x : at least thats how i interpret it

[2021-08-18 19:59:10] kilrah : same 2 bits for mm2 from my notes

[2021-08-18 19:59:32] m4x : mm2?

[2021-08-18 20:01:37] heresmydron : so if it has forearms... it should have legs! _checks param list for a "leg" param_

[2021-08-18 20:02:07] kilrah : mini2

[2021-08-18 20:02:09] m4x : No LEDs on antenna feets yet I guess

[2021-08-18 20:02:12] m4x : Ah ok

[2021-08-18 20:02:20] m4x : Right I remember they called it both internally

[2021-08-18 20:03:07] heresmydron : ```flying_limit_info_share_limit_enbaled```

[2021-08-18 20:03:11] heresmydron : **enbaled**

[2021-08-18 20:03:21] heresmydron : gotta love misspellings on the parameters :smile:

[2021-08-18 20:03:30] m4x : Oh theres a bunch funnies

[2021-08-18 20:04:22] heresmydron : at least they used english. imagine parsing the parameters list in chinese

[2021-08-18 20:04:40] heresmydron : we would need a chinese bin4ry

[2021-08-18 20:04:53] m4x :

[2021-08-18 20:05:29] m4x : min height flying limit?

[2021-08-18 20:05:30] m4x : lol

[2021-08-18 20:05:51] heresmydron : look at m4xw flexing that licensed IDA

[2021-08-18 20:05:52] m4x : what if u fly down a hill

[2021-08-18 20:06:28] m4x :

[2021-08-18 20:06:31] heresmydron : min height flying limt on the mini1 is the minimum height from the ground. meaning that it will trigger autolanding closer to the ground

[2021-08-18 20:06:46] heresmydron : not sure what it does in the air 2

[2021-08-18 20:06:48] heresmydron : probably the same

[2021-08-18 20:07:09] m4x : also water low limit

[2021-08-18 20:07:15] m4x : wonders me if it can detect the surface types

[2021-08-18 20:07:25] m4x : other than a generic "shitty surface"

[2021-08-18 20:07:53] heresmydron : aha! didnt notice that one

[2021-08-18 20:07:57] heresmydron : ```flying_limit_water_low_limit_enable default = 0 range = < 0 .. 1 >```

[2021-08-18 20:08:04] heresmydron : not gonna volunteer to test it

[2021-08-18 20:08:20] m4x : jjust fill a glass with water and land on top

[2021-08-18 20:08:32] m4x : needs some excellent piloting to keep sensor just in the cup

[2021-08-18 20:08:38] heresmydron : hahaa

[2021-08-18 20:08:43] m4x : :smart

[2021-08-18 20:08:54] m4x : ofc leave some wiggleroom

[2021-08-18 20:09:01] heresmydron : and permission from DJI

[2021-08-18 20:09:06] heresmydron : cups are auth zones

[2021-08-18 20:09:11] m4x : xD

[2021-08-18 20:09:21] m4x : anything indoor

[2021-08-18 20:09:26] m4x : poor ppl that have gps indoor

[2021-08-18 20:10:05] m4x : where did u get the range info from?

[2021-08-18 20:12:29] heresmydron : heh

[2021-08-18 20:12:41] heresmydron : output from comm_og_service_tool shows it

[2021-08-18 20:13:01] m4x : ah i never check that

[2021-08-18 20:13:05] m4x : i wonder if theres hidden ones

[2021-08-18 20:13:08] m4x : so i just check the fc

[2021-08-18 20:13:39] m4x : ROM:70094C3C 00000021 C DJI-DEMO AES256 KEY-lala-haha-MA

[2021-08-18 20:13:42] m4x : :see_no_evil:

[2021-08-18 20:14:12] heresmydron : comm_og_service_tool complains about some parameters not being able to be read but i think they simply changed the way the ACs send parameters. have noticed that since the mini1

[2021-08-18 20:14:28] heresmydron : `Response on parameter 542 indicates end of list despite larger size reported.`

[2021-08-18 20:15:39] m4x : it needs a few fixes anyway, theres also a issue with getting answers from different subsystems

[2021-08-18 20:15:50] m4x : fixed that a while ago for gimbal cal's

[2021-08-18 20:15:55] m4x : wonder if its the same shit

[2021-08-18 23:47:21] m4x : btw for ppl that still have issues with the cert, please try local datamode with dji go v5

[2021-08-18 23:47:33] m4x : it does seem to lock the token updates to last state

[2021-08-18 23:48:00] m4x : airplane mode -> enabled it, airplane mode off and the initial release still works assuming u didnt start it since then

[2021-08-18 23:48:24] m4x : this might help some shit

[2021-08-19 07:32:33] bin4ry : we are not issuing certs to dji id, so that will not help unless you have a cert installed already and want ot make sure it sticks that way. So it cannot help in problems but only if you want to keep the curreny status

[2021-08-19 13:46:38] bin4ry : @channel so little info, the hint from @m4x is very good. Use "local data mode" on the fly app. It will stop dji from setting a userID to the Aircraft, which will solve the little "start with the app button" problem. :slightly_smiling_face:. For Air2, Air2s ofc. . Go4 is not such a bitch like Fly, lol

[2021-08-19 14:04:58] david.haluska : is there any way how to get maps working together with "local data mode" in DJI Fly and DJI GO 4?

[2021-08-19 14:09:44] bin4ry : maps are working

[2021-08-19 14:10:59] david.haluska : let me try as when I was trying few version back they were completely off when using local data mode

[2021-08-19 14:11:31] bin4ry : i just flipped it here and i have maps visible, can even zoom into other states

[2021-08-19 14:12:30] m4x : seems opening maps might trigger a update lol

[2021-08-19 14:14:09] m4x : lmfao after reboot, original cert is back again and working

[2021-08-19 14:14:10] m4x : wtf

[2021-08-19 14:14:32] m4x : wtf now i cant open the maps "unsupported in local datamode"

[2021-08-19 14:14:35] m4x : how did i bug into there then

[2021-08-19 14:14:36] m4x : lmfao

[2021-08-19 14:14:52] m4x : i went to it from the gyro view

[2021-08-19 14:15:01] m4x : maybe that bypasses the logic lol

[2021-08-19 14:18:01] bin4ry : lol rly? i can open it here in local data mode

[2021-08-19 14:18:02] bin4ry : no problem

[2021-08-19 14:18:05] bin4ry : that is funny then

[2021-08-19 14:18:19] m4x : from the gmap icon?

[2021-08-19 14:18:28] m4x : i could only via the shortcut from the globe

[2021-08-19 14:18:28] bin4ry : from the camera view

[2021-08-19 14:18:34] bin4ry : just click in the corner where the maps are

[2021-08-19 14:18:43] m4x : yea says not supported in local datamode

[2021-08-19 14:18:54] m4x : ios?

[2021-08-19 14:18:57] m4x : testing android here

[2021-08-19 14:19:16] m4x : i totally got into there tho..

[2021-08-19 14:19:18] m4x : so weird

[2021-08-19 14:19:46] bin4ry : yah i have tested on the ios device

[2021-08-19 14:19:55] bin4ry : i am charging teh android test phone currently

[2021-08-19 14:19:56] bin4ry : ^^

[2021-08-19 14:37:42] david.haluska : In latest fw of smart controller there is DJI GO 4 4.3.38 and there is even no possibility to turn on local data mode

[2021-08-19 14:37:54] bin4ry : ah ok

[2021-08-19 14:38:00] bin4ry : well it is not needed

[2021-08-19 14:38:07] bin4ry : it works also completely online

[2021-08-19 15:39:27] heresmydron : on my samsung s...8? i think? local data mode switches the map from mapbox to google maps, but it doesnt load any tile for some reason

[2021-08-19 15:39:45] heresmydron : i dont have any google account logged into that phone so that might be the issue though

[2021-08-19 16:17:55] d95gas : @bin4ry Just wondering how its going with the Mini2 options for the Cert..... No pressure .... No hurry...... I just make sure I dont go online with Mini2, but just interested to hear how its going?

[2021-08-19 16:31:25] bin4ry : working on it, news on monday

[2021-08-19 16:31:26] fredmicrowave : I wish I was lucky enough to get a licence for the mini2 while it worked . I never go online anyway :slightly_smiling_face: . One time license would be enought for me.

[2021-08-19 16:31:32] bin4ry : or tuesday :stuck_out_tongue:

[2021-08-19 16:31:36] bin4ry : depends on weekends results

[2021-08-19 16:31:51] fredmicrowave : Cool !

[2021-08-19 16:41:38] d95gas : Thanks @bin4ry appreciate the time you are giving to this :+1:

[2021-08-19 17:35:00] originaldobo007 : You’re famous bin4ry! [https://kanzhaji.com/news/flysafe/61314.html](https://kanzhaji.com/news/flysafe/61314.html) :laughing::laughing:

[2021-08-19 17:53:00] m4x : ?

[2021-08-19 17:53:06] m4x : some random china site?

[2021-08-19 17:53:08] m4x : who cares?

[2021-08-19 17:54:33] m4x : or am i missing smth @originaldobo007

[2021-08-19 17:59:38] originaldobo007 : Kanzhaji is a pretty big site.

[2021-08-19 17:59:48] originaldobo007 : Well known in China

[2021-08-19 18:15:08] m4x : i c

[2021-08-19 20:13:30] m4x : with some luck i mightve found the solution :crossed_fingers: Need binary to confirm it tomorrow

[2021-08-19 20:15:03] m4x : If it works it would be silly work the last few days :see_no_evil:

[2021-08-20 09:46:13] m4x : FeelsGoodMan

[2021-08-20 09:46:48] bin4ry : looks fine, weekend testing. we will post news on monday

[2021-08-20 13:14:06] infinitydrones : mavic 2 @ 1000m

[2021-08-20 13:14:26] infinitydrones : mod is working great

[2021-08-20 13:15:21] m4x : it looks so fake

[2021-08-20 13:15:23] m4x : for some reason

[2021-08-20 13:15:41] m4x : might be me being on rdp :see_no_evil:

[2021-08-20 13:16:14] bin4ry : it somewhat looks like a postcard

[2021-08-20 13:16:18] bin4ry : :smile:

[2021-08-20 13:16:28] bin4ry : very nice one though

[2021-08-20 13:16:30] infinitydrones : haha it's real, That is table mountain in the background

[2021-08-20 13:29:46] originaldobo007 : Western Cape! Magnificent! I miss it so much.

[2021-08-20 15:09:12] dronepilot : Mavic 2 Pro + SC + DH

[2021-08-20 15:53:31] joonas : as someone how builds custom quads, it's so adorable to see everyone here ecstatic about being able to go above a few hundred meters :smile:.

[2021-08-20 15:53:43] joonas : <https://www.youtube.com/watch?v=LPrpcklD6Qo> come back when your mavic can do this :smile:

[2021-08-20 16:13:26] loaderbull : SC FW V01.01.0064 released today folks…

[2021-08-20 16:15:43] loaderbull : Release notes - Fixed some bugs...

[2021-08-20 16:18:17] loaderbull : <https://dl.djicdn.com/downloads/smart%20controller/20210713/DJI_Smart_Controller_Release_Notes_EN_202107.pdf>

[2021-08-20 16:18:44] loaderbull : I wonder what the 'bugs' were

[2021-08-20 17:39:00] originaldobo007 : Just SC fw though?

[2021-08-20 17:41:24] loaderbull : Not sure if it updated fly/go too. Hopefully someone else can chime in

[2021-08-20 17:43:09] m4x : Didn't get a notification for go v5

[2021-08-20 17:44:12] loaderbull : Yeh same. Usually it loads up a new version when you load app. It didnt. So maybe just SC updated

[2021-08-20 17:44:42] originaldobo007 : No fly update on iOS.

[2021-08-20 17:45:22] loaderbull : Usually SC apps are delayed compared to phone versions (so far)

[2021-08-20 17:45:41] loaderbull : Prob just SC FW then by the looks

[2021-08-20 18:07:01] m4x : Unless they do a license.name is drone hacks, then there's nothing they can do to annoy us from dji fly side with the Monday release

[2021-08-20 18:14:39] loaderbull : Inside info, i like it

[2021-08-20 18:17:54] originaldobo007 : Smart RC no longer available standalone on DJI store USA

[2021-08-20 18:18:29] loaderbull : Over here it’s scarce too

[2021-08-20 18:18:44] originaldobo007 : Looks like they are really gearing up for the 3

[2021-08-20 18:18:49] originaldobo007 : With new Smart RC

[2021-08-20 18:22:14] originaldobo007 : Just looked - that "new" Smart RC fw was released over a month ago. 7/13

[2021-08-20 18:22:55] loaderbull : Here i only got notified today… used it many times lately

[2021-08-20 18:24:11] loaderbull : Have you got SC?

[2021-08-20 18:30:57] originaldobo007 : I used to have it. Sold it with my M2P kit a while back. I currently run the Air2S with its standard RC.

[2021-08-20 21:52:10] oakley75 : Two questions: 1. Is the gps/nfz issue applicable to the original v1.20 version (offline in its entirety), or just the newer v1.21 method? 2. Using v1.20 and a clean drone, is it possible to get the original method still? Staying offline if course. Prefer the simple version without the additional files honestly

[2021-08-20 21:57:01] m4x : the new update shouldnt need any new user interaction (on the minis etc)

[2021-08-20 21:57:11] m4x : what gps issue?

[2021-08-20 21:57:16] m4x : for nfz u always need gps

[2021-08-20 21:57:20] m4x : otherwise turn it off

[2021-08-20 21:57:22] m4x : its a dji feature

[2021-08-20 21:57:25] kilrah : Old method not possible anymore

[2021-08-20 21:57:41] m4x : depends on if he did the change already

[2021-08-20 21:57:45] m4x : but it would do a useless dji login

[2021-08-20 21:57:49] kilrah : But the new one is just better all around

[2021-08-20 21:58:14] m4x : new ver needs no user id

[2021-08-20 21:58:30] m4x : on mini's it defaults on the certs too

[2021-08-20 21:58:38] oakley75 : So the old original method is gone from the server completely huh

[2021-08-20 21:58:40] m4x : on m2 i think he said he needed to enable it once

[2021-08-20 21:58:45] m4x : and some other

[2021-08-20 21:58:50] m4x : and sticks after reboot

[2021-08-20 21:58:58] m4x : no rooting shenanigans but once

[2021-08-20 21:59:14] m4x : (to enable it for them)

[2021-08-20 21:59:55] kilrah : Old method needed dh client to log in to dji, but dji killed that login method

[2021-08-20 22:00:15] m4x : its not needed anymore

[2021-08-20 22:00:23] m4x : the method still works

[2021-08-20 22:00:25] oakley75 : The 'lose gps and it goes into nfz lock mode' issue. Figured it applies to both methods but haven't actually read that

[2021-08-20 22:00:26] m4x : but it would just waste time

[2021-08-20 22:00:31] kilrah : So old can't be done anymore

[2021-08-20 22:01:17] oakley75 : @kilrah ahhh yea thanks

[2021-08-20 22:01:45] m4x : they didnt kill the login method

[2021-08-20 22:01:50] m4x : they changed the secret elsewhere

[2021-08-20 22:01:58] m4x : so its a useless number

[2021-08-20 22:02:07] m4x : and old dh used that number server side before

[2021-08-20 22:02:16] m4x : so like i said, depends if he changed it already

[2021-08-20 22:02:17] m4x : or not

[2021-08-20 22:02:20] m4x : on server side

[2021-08-20 22:02:41] m4x : updated ver wont have a useless login window tho :stuck_out_tongue:

[2021-08-20 22:03:35] kilrah : Ah yes it was a choice not to use the login anymore

[2021-08-20 22:04:20] m4x : what u said was correct in the past more or less, yes

[2021-08-20 22:04:25] m4x : but outdated info

[2021-08-20 22:04:59] oakley75 : The early simplicity still appeals. Get er done and offline/ local data mode from then on

[2021-08-20 22:05:27] m4x : it gets simpler than that mate

[2021-08-20 22:05:34] m4x : no stay offline required

[2021-08-20 22:05:39] m4x : no press button required

[2021-08-20 22:05:49] m4x : and no login

[2021-08-20 22:05:59] m4x : just dont update fw..

[2021-08-20 22:07:29] kilrah : t's even more simple now...

[2021-08-20 22:08:31] m4x : and its a feature that it still works when verification fails on the user :wink:

[2021-08-20 22:09:12] m4x : so everyone can be at ease

[2021-08-20 22:09:25] m4x : just a matter of final testing & release

[2021-08-20 22:09:35] m4x : but weekend ohno

[2021-08-20 22:09:49] oakley75 : Curious though, how much code are we ending up adding? Also I assume we're running an exploit for root to work in shell?

[2021-08-20 22:10:11] oakley75 : To apply i mean

[2021-08-20 22:10:31] m4x : for cert?

[2021-08-20 22:10:39] m4x : no code required technically

[2021-08-20 22:10:43] m4x : at all

[2021-08-20 22:11:06] m4x : you only have to flip it on in manage geozones at worst

[2021-08-20 22:11:26] m4x : for the new ver

[2021-08-20 22:12:52] oakley75 : To adjust for the id swapping every few hours. Guess i assumed really

[2021-08-20 22:13:16] m4x : yea turned out theres a kill switch for that :wink:

[2021-08-20 22:13:23] m4x : its now for the drone

[2021-08-20 22:13:27] m4x : instead for drone + user

[2021-08-20 22:13:34] m4x : :smart

[2021-08-20 22:13:48] oakley75 : This is so damn fun hell yeah lol

[2021-08-20 22:14:07] m4x : device vs user_only

[2021-08-20 22:15:23] oakley75 : Sounding like beautiful simplicity.

[2021-08-20 22:15:31] m4x : Sounds like selfmade troubles hah!

[2021-08-20 22:15:46] oakley75 : Lol

[2021-08-20 22:16:03] m4x : thats how it is if you dont know what a certain bit does :stuck_out_tongue:

[2021-08-20 22:16:32] m4x : and all certificates basically have that set

[2021-08-20 22:16:36] m4x : that come from dji

[2021-08-20 22:17:03] m4x : so kill it and good lol

[2021-08-20 22:23:09] oakley75 : Sometimes I think of ReplayTV days when they were required to alter their code to remove automatic commercial skip. But they were nerdy guys who disagreed, so they intentionally accomplished it with an easily reversible method. Simply being cool to the real users, but satisfying the sheep. I wonder about this newest discovery in the same manner...

[2021-08-20 22:24:04] m4x : tbh it might be for country unlocks etc

[2021-08-20 22:24:11] m4x : at least intended

[2021-08-20 22:27:47] oakley75 : Makes more sense ha

[2021-08-20 22:35:22] oakley75 : I feel 100% crazy for this, but I'll state it anyway. The Air 2 parameters, especially vertical up/down, seem faster after the cert, than before. Makes no logic, I get it. But can't shake it. No one else I presume? Was just a minute flight tho

[2021-08-20 22:36:36] m4x : it disables some stuff when going under 3m

[2021-08-20 22:36:40] m4x : iirc

[2021-08-20 22:36:47] m4x : at least mini does

[2021-08-20 22:37:19] m4x : so it mightve not been using gps for speed limit?=

[2021-08-20 22:39:20] oakley75 : I'm afraid it's possibly my craziness setting in ha

[2021-08-22 03:31:36] lolo780 : With 1.21 certificate, can any device be used to fly? Even one logged in to a different account?

[2021-08-22 07:56:22] lolo780 : Works fine with different accounts and RCs.

[2021-08-23 09:13:33] bin4ry : <https://drone-hacks.com/blog/post/532>

[2021-08-23 09:14:22] mail451 : Dope!!

[2021-08-23 09:35:20] flymymavic : Fully tested, here is my guide [https://youtu.be/pSFSbAFqwQ8](https://youtu.be/pSFSbAFqwQ8)

[2021-08-23 09:35:52] m4x : Hope ya all enjoy the new way of flying

[2021-08-23 09:35:58] m4x : :hear_no_evil:

[2021-08-23 09:36:02] flymymavic : Most definitely

[2021-08-23 09:42:01] m4x : One thing to note, at least on Mini 2 in NFZ, it may still ask for authorization on takeoff. But its a pseudo dialog and you can just take off. Just start dji fly in the air and it wont complain

[2021-08-23 09:43:32] m4x : @bin4ry you repro'd this btw?

[2021-08-23 09:43:54] bin4ry : that is normal behaviour for dji

[2021-08-23 09:44:02] bin4ry : warning is normal, :slightly_smiling_face:

[2021-08-23 09:44:12] m4x : just weird they dont let u cancel the dialog

[2021-08-23 09:44:16] m4x : and u need to close the app

[2021-08-23 09:44:31] m4x : maybe worth adding a note to the blog?

[2021-08-23 09:44:38] m4x : since its confusing for randoms

[2021-08-23 09:47:28] bin4ry : you cannot confirm it? i can confirm the dialog here and it vanishes

[2021-08-23 09:47:55] bin4ry : we will see i will update the website over time with tips and hints

[2021-08-23 09:49:39] m4x : i actually never tried, u probably can just fine, but then i assume it generates another dji cert

[2021-08-23 09:49:47] m4x : at least thats what it did without unlock

[2021-08-23 09:49:54] m4x : (actually generates 2 certs for my zone)

[2021-08-23 09:50:02] m4x : hamburg and hamburg_atf<nr>

[2021-08-23 09:50:22] m4x : question is what about non-self-unlock nfz

[2021-08-23 09:50:33] m4x : is it just confirmable there too or not

[2021-08-23 09:51:00] m4x : and yea didnt try confirming because it is self-unlock nfz

[2021-08-23 09:51:11] m4x : so figured that would work anyway

[2021-08-23 10:32:30] bin4ry : yah it can get confusing with dji :smile: :smile:

[2021-08-23 10:59:16] matthijst : Works great on a mini 2. Didn't get a message in offline mode. It just started and went up up up and awayyyy.

[2021-08-23 11:00:07] m4x : oh right, i wasnt testing local datamode

[2021-08-23 11:00:40] matthijst : In an altitude mode it would previously stop at the "ceiling".

[2021-08-23 11:01:20] m4x : i kinda miss it doesnt honor the altitude limit <500m

[2021-08-23 11:01:22] m4x : if manually set

[2021-08-23 11:01:28] m4x : i make use of it so much..

[2021-08-23 11:01:33] bin4ry : no it does not honor it anymore

[2021-08-23 11:01:42] bin4ry : if the certificate is avtivated the ceiling will be ignored

[2021-08-23 11:01:42] m4x : yea thats what i dont like

[2021-08-23 11:01:49] bin4ry : you can always flip it off

[2021-08-23 11:01:52] bin4ry : in the fly app

[2021-08-23 11:01:53] m4x : ive been going slightly over the limit all the time

[2021-08-23 11:01:59] bin4ry : just turn it off an then you have the ceiling back :smile:

[2021-08-23 11:01:59] m4x : then i need to talk to dji servers

[2021-08-23 11:02:00] m4x : ew

[2021-08-23 11:02:18] m4x : wonder if i can do it midflight lol

[2021-08-23 11:02:30] bin4ry : go try lol

[2021-08-23 11:02:47] m4x : i know it doesnt deactivate until landing and thats only for user certs hm

[2021-08-23 11:02:54] m4x : never tried in flight tho

[2021-08-23 11:03:00] m4x : if its just for takeoff, that would be fine

[2021-08-23 11:05:42] bin4ry : actually this would be an intersting thing to try

[2021-08-23 11:59:01] kilrah : no you can't toggle in flight, tried a couple of days ago with the mini2

[2021-08-23 11:59:12] m4x : i c

[2021-08-23 12:07:55] bin4ry : i think it can be activated in flight but not deactivated

[2021-08-23 12:30:25] kilrah : i don't remember for sure which way i tried

[2021-08-23 12:30:39] kilrah : but i think i tried activating

[2021-08-23 12:31:15] kilrah : plan was to climb till it stopped and then activate, so i checked if i could do that before going up

[2021-08-23 13:55:57] mel69hash : @bin4ry I knew you can do it soon enough.

[2021-08-23 13:56:36] mel69hash : Anyone know how the increase beyond -3 on Mini 2 descend

[2021-08-23 14:09:49] bin4ry : @mel69hash you can try the same gentle mode hack i posted on the unlock-certificate website <https://drone-hacks.com/unlock-certificate> i did not try it on the mini2 yet

[2021-08-23 14:10:42] lolo780 : I couldn't get anything faster than -3 descent on the mini 2

[2021-08-23 14:12:20] originaldobo007 : Let me know if you ever figure out how to get anything more than -6 on Air2S.

[2021-08-23 14:21:12] mel69hash : Hey Bud, I'm the first few tried on M1P. I will do it if anyone can show me the parameter where to change to enable motor to start in turtle mode or inverted.

[2021-08-23 14:34:56] trulala69 : Someone tried a modded gentle mode with MM2 and it didn't work unfortunately ...

[2021-08-23 14:39:48] m4x : the minis probably would get some stability issues dropping with so low motor input

[2021-08-23 14:39:58] m4x : just a guess

[2021-08-23 14:40:10] m4x : at least in regard to wind spec

[2021-08-23 14:40:56] lolo780 : Possibly, but Spark worked fine +/- 10

[2021-08-23 14:41:36] m4x : What weight class was spark

[2021-08-23 14:42:31] m4x : Makes me wonder if it would drop faster with a payload

[2021-08-23 14:42:42] bin4ry : depends on the payload

[2021-08-23 14:42:46] bin4ry : :smile: :smile:

[2021-08-23 14:42:50] bin4ry : explosive maybe ?

[2021-08-23 14:42:51] bin4ry : then yes

[2021-08-23 14:42:56] m4x : Instructions unclear, brick doesn't lift off

[2021-08-23 14:43:02] bin4ry : lol

[2021-08-23 14:43:21] m4x : Can't have landing speed issues if not flying

[2021-08-23 14:44:11] originaldobo007 : Total bullshit that Air2S can’t go faster than -6 when Air2 had no stability issues going faster than that.

[2021-08-23 14:53:40] m4x : hm

[2021-08-23 14:54:26] m4x : ROM:70109DF8 00000026 C g_config.control.vert_vel_down_adding ROM:70110FD8 00000027 C g_config.mode_normal_cfg.vert_vel_down ROM:70111028 00000025 C g_config.mode_normal_cfg.vert_vel_up ROM:701111F0 00000026 C g_config.mode_sport_cfg.vert_vel_down ROM:70111254 00000024 C g_config.mode_sport_cfg.vert_vel_up ROM:70110AB0 00000027 C g_config.mode_tripod_cfg.vert_vel_down ROM:70110AF4 00000025 C g_config.mode_tripod_cfg.vert_vel_up

[2021-08-23 14:54:34] m4x : guess need to re that struct first

[2021-08-23 14:54:49] m4x : dunno if we can set the upper/lower limits via params

[2021-08-23 14:56:24] m4x : @bin4ry u know what adding was for?

[2021-08-23 14:56:26] originaldobo007 : On Air2S the vert down params - even if you set to -10, don't stick,

[2021-08-23 14:56:46] m4x : its vert_vel_

[2021-08-23 14:57:19] originaldobo007 : Yes - still won't work though

[2021-08-23 14:57:23] m4x : ok

[2021-08-23 14:57:57] m4x : vert_vel_down_adding might be interesting tho

[2021-08-23 14:58:00] originaldobo007 : Even if you set the vert_vel_down param to -10m/s it still will only descend at -6m/s

[2021-08-23 14:58:00] m4x : if its a plain offset

[2021-08-23 14:58:04] originaldobo007 : Air2S

[2021-08-23 14:58:09] m4x : well yea

[2021-08-23 14:58:12] m4x : that would be expected

[2021-08-23 14:58:18] m4x : given theres a vel_output_limit

[2021-08-23 14:58:24] m4x : hence i quoted the pic

[2021-08-23 14:58:30] originaldobo007 : Ahh - gotcha

[2021-08-23 14:58:39] m4x : i wonder about vert_vel_down_adding

[2021-08-23 14:58:42] m4x : if its a plain offset

[2021-08-23 14:58:55] originaldobo007 : And there is no output limit on the MA2?

[2021-08-23 14:59:03] m4x : no clue

[2021-08-23 14:59:06] m4x : i only look at mini 2

[2021-08-23 14:59:09] originaldobo007 : gotcha

[2021-08-23 14:59:14] m4x : i expect the limit simply to be set higher tho

[2021-08-23 15:00:02] m4x : need to do more RE on those structs before i can say stuff for sure

[2021-08-23 15:00:05] m4x : but no time rn

[2021-08-23 15:00:56] originaldobo007 : There are some interesting behaviors of the Air2S in terms of battery. For instance, it will descend at 6m/s. But sometimes after a long ad high flight, once it is a couple hundred meters up, it will slow down and only descend at 3m/s. I suspect this is a battery protection mechanism built in.

[2021-08-23 15:01:29] m4x : or you landing with a updraft

[2021-08-23 15:01:31] originaldobo007 : But it will only do this when it is fairly low in altitude.

[2021-08-23 15:01:37] originaldobo007 : No - no updraft.

[2021-08-23 15:01:47] m4x : eh i think that was a sensor thing

[2021-08-23 15:01:48] originaldobo007 : Others have noticed this behavior.

[2021-08-23 15:02:09] originaldobo007 : No - it is a battery protection thing built in.

[2021-08-23 15:02:31] originaldobo007 : Anyone with an Air2S can tell you it sometimes does this

[2021-08-23 15:02:33] m4x : Could be, but my first thought would be sensors not keeping up the reading at that distance

[2021-08-23 15:02:42] m4x : But then it would always happen under same circumstances

[2021-08-23 15:02:55] originaldobo007 : I think it depends on battery temperature, etc

[2021-08-23 15:03:08] m4x : I don't deny that

[2021-08-23 15:03:20] originaldobo007 : Will do it when it is a couple hundred meters up and battery is getting a bit low.

[2021-08-23 15:03:29] kilrah : isn't it the usual 2 speeds for autolanding?

[2021-08-23 15:03:39] kilrah : ok not that high then

[2021-08-23 15:03:51] originaldobo007 : This is even when you do full throttle down.

[2021-08-23 15:03:53] m4x : There's a go home velocity limit too

[2021-08-23 15:03:56] m4x : Saw that earlier

[2021-08-23 15:04:02] kilrah : yeah gentle didn't work on mini2 but i didn't try on later firmwares

[2021-08-23 15:04:10] kilrah : only back when i got it in november

[2021-08-23 15:04:14] originaldobo007 : Right - I wish I could speed up the go home velocity automatic speed.

[2021-08-23 15:04:15] m4x : I think u need another param to get in there

[2021-08-23 15:04:19] originaldobo007 : It's a hidden param now

[2021-08-23 15:04:38] originaldobo007 : On P4P it was 22mph but could tweak it to be 33mph

[2021-08-23 15:05:00] m4x : Iirc it depends on active mode for mini

[2021-08-23 15:05:24] originaldobo007 : I honestly don't know why DJI is hiding params like that now - it's not really "dangerous" to speed up the default RTH by a few mph.

[2021-08-23 15:05:28] m4x : I only saw limits for altitude in that regard

[2021-08-23 15:06:25] kilrah : the answer might be in what they found in crashed drones that were sent for repair...

[2021-08-23 15:07:38] m4x : Address Length Type String ROM:70110D90 00000020 C mode_gentle_cfg_tilt_atti_range ROM:70110DB0 00000020 C mode_gentle_cfg_tors_gyro_range ROM:70110DD0 00000020 C mode_gentle_cfg_tilt_gyro_range ROM:70110DF0 00000019 C mode_gentle_cfg_rc_scale ROM:70110E0C 0000001E C mode_gentle_cfg_vert_acc_down ROM:70110E2C 0000001E C mode_gentle_cfg_vert_vel_down ROM:70110E4C 0000001C C mode_gentle_cfg_vert_acc_up ROM:70110E68 0000001C C mode_gentle_cfg_vert_vel_up ROM:70110E84 0000002C C g_config.mode_gentle_cfg.tors_exp_mid_point ROM:70110EB0 0000002C C g_config.mode_gentle_cfg.lift_exp_mid_point ROM:70110EDC 0000002C C g_config.mode_gentle_cfg.tilt_exp_mid_point ROM:701237F0 00000013 C pm_mode_gentle_cfg ROM:70123804 00000024 C pb_add_pm_mode_gentle_cfgCFG_GENTLE

[2021-08-23 15:11:51] m4x : ROM:70109AFC aGConfigControl_10 DCB "g_config.control.control_mode[0]",0 ROM:70109B1D DCB 0, 0, 0 ROM:70109B20 aGConfigControl_11 DCB "g_config.control.control_mode[1]",0 ROM:70109B41 DCB 0, 0, 0 ROM:70109B44 aGConfigControl_12 DCB "g_config.control.control_mode[2]",0

[2021-08-23 15:11:57] m4x : could try setting this?

[2021-08-23 15:12:04] m4x : genlte does seem to be in fwiw

[2021-08-23 15:12:13] m4x : i guess its not hooked up to one of the modes

[2021-08-23 15:12:52] m4x : fwiw theres also g_config.control.multi_control_mode_enable

[2021-08-23 15:14:12] m4x : ROM:7002093C DCD aPbAddPmMissRtk ; "pb_add_pm_miss_rtk_configCFG_MISS_RTK" ROM:70020940 DCD loc_7009E0CC+1 ROM:70020944 DCD aPbAddPmModeTri ; "pb_add_pm_mode_tripod_cfgCFG_TRIPOD" ROM:70020948 DCD loc_7009E108+1 ROM:7002094C DCD aPbAddPmModeCin ; "pb_add_pm_mode_cinematic_cfgCFG_CINEMAT"... ROM:70020950 DCD loc_7009E0D8+1 ROM:70020954 DCD aPbAddPmModeGen ; "pb_add_pm_mode_gentle_cfgCFG_GENTLE" ROM:70020958 DCD sub_7009E0E4+1 ROM:7002095C DCD aPbAddPmModeNor ; "pb_add_pm_mode_normal_cfgCFG_NORMAL" ROM:70020960 DCD loc_7009E0F0+1 ROM:70020964 DCD aPbAddPmModeSpo ; "pb_add_pm_mode_sport_cfgCFG_SPORT"

[2021-08-23 15:14:26] m4x : probably counting up from CFG_TRIPOD ?

[2021-08-23 15:14:35] m4x : at least smth liike that i'd expect

[2021-08-23 15:19:23] m4x : can someone with a mini read control.control_mode array?

[2021-08-23 15:24:20] m4x : grabbed mine..

[2021-08-23 15:24:39] m4x : hm

[2021-08-23 15:36:00] kilrah : gentle is 6, you can enable it, set params for it, they work, except the vert speed ones

[2021-08-23 15:36:03] kilrah : at least on mm2

[2021-08-23 15:36:17] kilrah : there must be something hardcoded in the fw that supercedes the params for VS

[2021-08-23 15:42:30] m4x : no i never even looked at that

[2021-08-23 15:43:37] m4x : > there must be something hardcoded in the fw that supercedes the params for VS a few

[2021-08-23 15:44:09] m4x : ```Address Length Type String ROM:70109DF8 00000026 C g_config.control.vert_vel_down_adding ROM:70110FD8 00000027 C g_config.mode_normal_cfg.vert_vel_down ROM:70111028 00000025 C g_config.mode_normal_cfg.vert_vel_up ROM:701111F0 00000026 C g_config.mode_sport_cfg.vert_vel_down ROM:70111254 00000024 C g_config.mode_sport_cfg.vert_vel_up ROM:70110AB0 00000027 C g_config.mode_tripod_cfg.vert_vel_down ROM:70110AF4 00000025 C g_config.mode_tripod_cfg.vert_vel_up ROM:70101E84 0000001E C little_accessory_vert_vel_max ROM:70110C48 00000021 C mode_cinematic_cfg_vert_vel_down ROM:70110C8C 0000001F C mode_cinematic_cfg_vert_vel_up ROM:70110E2C 0000001E C mode_gentle_cfg_vert_vel_down ROM:70110E68 0000001C C mode_gentle_cfg_vert_vel_up ROM:70111218 0000001D C mode_sport_cfg_vert_vel_down ROM:70111278 0000001B C mode_sport_cfg_vert_vel_up ROM:70115EE0 0000003D C pb_add_pm_vert_vel_bat_limit_par_cfg_tCFG_VERT_VEL_BAT_LIMIT ROM:7010A3CC 0000001E C plant_gain_comp_vert_vel_down ROM:7010A3EC 0000001C C plant_gain_comp_vert_vel_up ROM:701012E8 00000020 C pm_vert_vel_bat_limit_par_cfg_t ROM:7010A208 0000001D C prop_cover_cfg.vert_vel_down ROM:7010A244 0000001B C prop_cover_cfg.vert_vel_up ROM:701082EC 00000009 C vert_vel ROM:70101620 00000011 C vert_vel_comp_fc ROM:7010B8F4 00000016 C vert_vel_comp_fltr_fc ROM:70101A3C 00000013 C vert_vel_comp_gain ROM:700D25A4 00000012 C vert_vel_ctrl_api ROM:70109E20 00000015 C vert_vel_down_adding ROM:7010A068 00000019 C vert_vel_down_adding_max ROM:701013EC 00000018 C vert_vel_down_bat_limit ROM:7010CC54 00000017 C vert_vel_err_threshold ROM:701019B4 0000000E C vert_vel_gain ROM:70101850 0000000B C vert_vel_k ROM:7010AB18 00000019 C vert_vel_limit_scale_cfg ROM:70101D2C 0000001C C vert_vel_output_lower_limit ROM:70101CD8 0000001C C vert_vel_output_upper_limit ROM:70101404 00000016 C vert_vel_up_bat_limit ROM:7010FAF0 00000013 C wifi_vert_vel_down ROM:7010FB04 00000011 C wifi_vert_vel_up```

[2021-08-23 15:48:31] m4x : i think it should go down to -8

[2021-08-23 15:49:34] m4x : @kilrah whats the max you were able to achieve?

[2021-08-23 15:50:30] kilrah : mini2? the dreaded -3

[2021-08-23 15:50:46] m4x : under which conditions

[2021-08-23 15:51:07] m4x : 3 would be accel limit

[2021-08-23 15:51:34] m4x : So 3m/s

[2021-08-23 15:51:47] kilrah : gentle vert_vel_down

[2021-08-23 15:52:25] m4x : Can u read the vert down adding

[2021-08-23 15:52:40] m4x : Wonder if it just adds +5

[2021-08-23 15:52:42] m4x : Or smth

[2021-08-23 15:54:40] m4x : hmmm

[2021-08-23 15:54:42] m4x : on mine

[2021-08-23 15:55:50] m4x : seems to match the max 3.5 from sports mode

[2021-08-23 15:56:07] m4x : coincidence? :stuck_out_tongue:

[2021-08-23 15:56:44] kilrah : interesting, 01.03.000 lets you go to -3.5, was -3 back then

[2021-08-23 15:57:17] m4x : i think worth a shot

[2021-08-23 15:57:36] m4x : control mode gentle vel down change add vel down max change

[2021-08-23 15:58:09] m4x : i think it will max at -8 tho

[2021-08-23 15:58:16] m4x : assuming the param had the right val

[2021-08-23 16:01:25] kilrah : hmm looks like theres a catch, you can set to -3.5 but it resets to -3

[2021-08-23 16:03:14] kilrah : there's really something somewhere that tries very hard to not let you exceed that-3...

[2021-08-23 16:04:50] m4x : yea for the normal serviecs

[2021-08-23 16:04:54] m4x : i wonder if its just a bug in dh

[2021-08-23 16:05:15] m4x : it did reset my 3.5 to 3.0 too

[2021-08-23 16:05:20] m4x : which was set by the drone itself lol

[2021-08-23 16:05:25] m4x : after save

[2021-08-23 16:06:01] m4x : after reset defaults i nDH back to 3.5

[2021-08-23 16:06:07] m4x : lol @bin4ry enforcing a bogus limit?

[2021-08-23 16:06:25] kilrah : it might be due to the sliders on the main page that override it

[2021-08-23 16:06:38] kilrah : since they're still coded with the -3 max

[2021-08-23 16:06:47] m4x : ugh mb

[2021-08-23 16:07:00] kilrah : need to try the python script

[2021-08-23 16:47:45] loaderbull : These values stuck after a reboot and fly. Are you saying what DH reads is fake values then….?

[2021-08-23 16:51:05] originaldobo007 : which drone @loaderpoo?

[2021-08-23 16:51:14] loaderbull : Air 2S

[2021-08-23 16:51:21] loaderbull : Tried 3 times

[2021-08-23 16:51:26] loaderbull : And values stick

[2021-08-23 16:51:37] originaldobo007 : The values stick. But It won't descend that fast.

[2021-08-23 16:51:44] loaderbull : Got ya

[2021-08-23 16:51:49] originaldobo007 : When you fly it, it will only descend -6m/s

[2021-08-23 16:52:05] loaderbull : I thought the values reset after reboot

[2021-08-23 16:52:32] loaderbull : Shame as like you have stated 3km is prob the limit with -6m/s

[2021-08-23 16:52:43] originaldobo007 : On mine they wouldn't reset. It just won't descend faster.

[2021-08-23 16:52:55] originaldobo007 : So 3km is basically the limit.

[2021-08-23 16:53:12] loaderbull : I wonder what the thinking was behind reducing that then from the Air 2…

[2021-08-23 16:53:22] originaldobo007 : That's exactly what I was wondering.

[2021-08-23 16:53:52] loaderbull : I love DJi drones but the way they do things is puzzling

[2021-08-23 16:54:07] originaldobo007 : There must be some other parameter disabling it from going faster.

[2021-08-23 16:54:33] loaderbull : There has to be as it makes zero sense. My programming skills are very limited however

[2021-08-23 16:54:39] originaldobo007 : Same here.

[2021-08-23 16:54:56] loaderbull : Give me hardware any day :grin:

[2021-08-23 16:55:10] originaldobo007 : Really wish I could get it to descend at 8m/s.

[2021-08-23 16:55:23] originaldobo007 : Ascent is fine for me at 7m/s

[2021-08-23 16:55:33] originaldobo007 : I just want to be able to come down faster.

[2021-08-23 16:55:40] loaderbull : So ascent also resets internally too?

[2021-08-23 16:55:54] loaderbull : Coming down quickly should surely take priority…

[2021-08-23 16:56:03] originaldobo007 : Apparently not. Ascent you can go up just fine.

[2021-08-23 16:56:09] originaldobo007 : and increase it to 10 m/s

[2021-08-23 16:56:24] originaldobo007 : They only limited descent. :woman-shrugging:

[2021-08-23 16:56:36] loaderbull : Ah ok thats better than not being able to adjust anything i guess

[2021-08-23 16:57:05] loaderbull : Somebody will chime in sooner or later with a string of code i reckon…if it is there of course

[2021-08-23 16:57:21] originaldobo007 : That would be great if we could find it.

[2021-08-23 16:58:22] loaderbull : I saw @m4x has been digging around but have been at work so was hard to go thru it all but not much point seems as there is no solution yet

[2021-08-23 16:58:35] originaldobo007 : If it was either ascent or descent, I'd rather they locked ascent. NO reason they should have locked descent.

[2021-08-23 16:58:45] loaderbull : Agree 100%

[2021-08-23 16:59:35] loaderbull : I suppose if it isnt in code then only other option would be a custom FC….and my guess is that will never happen either

[2021-08-23 17:06:07] fredmicrowave : I wonder if adding an empennage to one of those smaller drone could avoid it to flip over when shutting down motors at high altitude... Like sticking an arrow vertically on it , or similar .

[2021-08-23 17:09:37] loaderbull : set the channel topic: DroneHacks homepage: Up | Support: Up | Latest Desktop Version: 1.22 | Latest Android Version: 1.0.9

[2021-08-23 17:26:10] m4x : @fredmicrowave drone should be capable to perform a barrel roll

[2021-08-23 17:26:17] m4x : Emphasis on should..

[2021-08-23 17:27:13] m4x : @loaderpoo there seems to be a hard and soft limit

[2021-08-23 17:27:38] m4x : At least without patched fc

[2021-08-23 17:33:43] m4x : @kilrah btw i suggest checking with tripod mode instead of gentle too

[2021-08-23 17:33:56] m4x : gentle seems to use a simliar backend as normal/sport

[2021-08-23 17:34:06] m4x : but tripod use different

[2021-08-23 17:34:58] kilrah : tripod doesn't let you set more than -3.5 either

[2021-08-23 17:35:12] m4x : Yea but with changed adding?

[2021-08-23 17:35:14] kilrah : the reson we've been trying gentle is it lets you set -10

[2021-08-23 17:35:26] m4x : Ignore the limit?

[2021-08-23 17:35:45] m4x : See if it sticks

[2021-08-23 17:35:47] kilrah : ?

[2021-08-23 17:36:03] m4x : If its ranges then that explains the 2nd val

[2021-08-23 17:36:22] m4x : Then should decent at - 18 max limit lol

[2021-08-23 17:36:42] m4x : Pretty sure it should allow for 8

[2021-08-23 17:36:45] m4x : As limit

[2021-08-23 17:36:53] m4x : Will double check in a minute

[2021-08-23 17:41:29] m4x : yea -3 hm

[2021-08-23 17:41:54] m4x : cinema is more hard locked

[2021-08-23 17:42:28] m4x : actually yea gentle profile should be fine

[2021-08-23 17:42:36] m4x : missed one thing earliero

[2021-08-23 17:45:32] m4x : adding maxc seems -10.0

[2021-08-23 17:45:52] m4x : min is -3.5

[2021-08-23 17:46:50] m4x : so.. try it already, i flew my batt empty earlier xD

[2021-08-23 18:01:40] flymymavic : just checking the air2s is NFZ height removable as the birdmap is a bit confusing

[2021-08-23 18:02:19] kilrah : Nope the adding things still do nothing

[2021-08-23 18:02:41] kilrah : Or again there's something that overrides anything the params can do at a lower level

[2021-08-23 18:04:44] m4x : Did u try @kilrah

[2021-08-23 18:04:51] m4x : No anecdotal evidence please

[2021-08-23 18:05:21] m4x : I'd suggest checking out the adding disable flag then

[2021-08-23 18:05:25] m4x : Or was it enable

[2021-08-23 18:05:31] m4x : Tho I'd guess it would be a nop

[2021-08-23 18:09:33] kilrah : Yes tried

[2021-08-23 18:10:02] originaldobo007 : Air2S is supported. Works great NfZ/Height removable.

[2021-08-23 18:12:39] m4x : thx

[2021-08-23 18:13:06] m4x : what was the altitude btw?

[2021-08-23 18:13:11] m4x : over 3m i guess?

[2021-08-23 18:29:15] kilrah : how would i be able to try several seconds of full speed descent if i was below 3m? :smile:

[2021-08-23 18:29:46] m4x : if you only check for 3m/s, sure

[2021-08-23 18:30:05] m4x : also need to exclude human fault in testing :stuck_out_tongue:

[2021-08-23 18:30:13] m4x : so just making sure

[2021-08-23 18:30:27] m4x : there is

[2021-08-23 18:30:28] m4x : i saw it

[2021-08-23 18:31:06] kilrah : those are the only 2 "adding" things i have `"table_no": 0,` `"param_index": 693,` `"name": "vert_vel_down_adding|g_config.control.vert_vel_down_adding",` `"min": 0,` `"max": 5,` `"default": 0,` `"value": "5",` `"changed": false,` `"type_id": 0` `},` `{` `"table_no": 0,` `"param_index": 694,` `"name": "vert_vel_down_adding_max",` `"min": -10.0,` `"max": 0.0,` `"default": -3.5,` `"value": "-10.000000",` `"changed": false,` `"type_id": 8` `},`

[2021-08-23 18:32:03] m4x : sec

[2021-08-23 18:34:42] m4x : hmm mightve had a switcheroo with the lines

[2021-08-23 18:35:11] m4x : does it even take floats a string tho?

[2021-08-23 18:35:16] m4x : in your quote

[2021-08-23 18:36:01] kilrah : ?

[2021-08-23 18:36:15] m4x : `"value": "-10.000000",`

[2021-08-23 18:36:19] m4x : should just be -10.0

[2021-08-23 18:36:34] m4x : " would fuck with the type

[2021-08-23 18:36:48] m4x : dunno how dh handles that

[2021-08-23 18:37:18] kilrah : this is the export from DH in its own format

[2021-08-23 18:37:25] m4x : concerning

[2021-08-23 18:37:28] m4x : lol

[2021-08-23 18:37:30] kilrah : why?

[2021-08-23 18:37:39] m4x : because type is wrong

[2021-08-23 18:37:44] m4x : needs shitty parsing then

[2021-08-23 18:37:47] m4x : which is annoying

[2021-08-23 18:37:51] m4x : when writing a json parser

[2021-08-23 18:38:05] m4x : ah i guess type_id

[2021-08-23 18:38:07] m4x : double meh

[2021-08-23 18:38:15] m4x : now everyone needs to know what each means

[2021-08-23 18:38:47] kilrah : all values in the dhp are in quotes

[2021-08-23 18:38:54] m4x : Can u read vert_vel_output_lower_limit vert_pos_output_upper_limit vert_acc_output_lower_limit vert_acc_output_upper_limit

[2021-08-23 18:41:22] kilrah : none of these present

[2021-08-23 18:42:11] m4x : i c

[2021-08-23 18:42:13] m4x : so internal

[2021-08-23 18:42:38] kilrah : that's from strings you got from the fw?

[2021-08-23 18:43:15] m4x :

[2021-08-23 18:43:19] m4x : didnt do the structs yet

[2021-08-23 18:43:22] m4x : so its messy

[2021-08-23 18:43:33] kilrah : use the script mefisto pointed you to

[2021-08-23 18:43:44] m4x : meh i prefer just doing it right

[2021-08-23 18:44:02] kilrah : if i remember well should build the whole table, with whether the param is hidden or not etc

[2021-08-23 18:44:22] kilrah : i.e. likely exactly what you "want to do right"

[2021-08-23 18:44:25] m4x : I will simply add it to my tooling

[2021-08-23 18:44:44] m4x : I do all my RE in IDA, so stuff i work on integrates

[2021-08-23 18:44:55] m4x : and if it doesnt integrate, i make it fit

[2021-08-23 18:45:02] kilrah : ok

[2021-08-23 18:45:35] m4x : also structs could always change

[2021-08-23 18:45:47] m4x : but i doubt since its simliar to mini 1 and there the tools work i assume

[2021-08-23 18:48:35] m4x : here dumped it anyway using the existing

[2021-08-23 18:48:57] m4x : feel free to take a look

[2021-08-23 18:50:34] m4x : that was from wm161_0306_v03.04.09.74_20210112

[2021-08-23 18:52:10] m4x : is there a collection so i can diff?

[2021-08-23 18:56:02] m4x : @kilrah shouldn't you be getting 3.5 at least?

[2021-08-23 18:56:17] m4x : Or is gentle cut off at 3

[2021-08-23 18:56:23] m4x : Or still old fw?

[2021-08-23 18:59:45] kilrah : think it's the potential DH issue mentioned above

[2021-08-23 18:59:52] m4x : thinking the same

[2021-08-23 19:00:02] m4x : questioning if gentle is even active as well

[2021-08-23 19:00:33] kilrah : it was back then when i first tried

[2021-08-23 19:00:43] m4x : was that before the dh change?

[2021-08-23 19:00:52] kilrah : if i changed yaw speed in gentle it'd change

[2021-08-23 19:01:06] kilrah : if i set gentle vel_down at -1 it goes down at 1m/s

[2021-08-23 19:01:23] m4x : theres both velocity and accel

[2021-08-23 19:01:28] m4x : normal as 4 accel

[2021-08-23 19:01:30] m4x : and 3 velocity

[2021-08-23 19:01:33] m4x : f.e.

[2021-08-23 19:01:57] m4x : cant go faster than accel

[2021-08-23 19:02:00] m4x : limited at vel

[2021-08-23 19:02:00] kilrah : accel doesn't matter for how fast it goes down, just how quickly it reaches that speed

[2021-08-23 19:02:11] kilrah : changes responsiveness

[2021-08-23 19:02:18] m4x : gravity only does so much

[2021-08-23 19:02:51] m4x : (at the standard motor output)

[2021-08-23 19:03:23] m4x : so if it accelerates at 4m/s to a velocity of 3m/s, reaction will be under a sec

[2021-08-23 19:03:32] m4x : but it still needs to be higher

[2021-08-23 19:03:36] kilrah : yup, sounds about right

[2021-08-23 19:03:41] kilrah : why?

[2021-08-23 19:03:57] m4x : because i think thats how dji caps it as well

[2021-08-23 19:04:26] m4x : i dont think its -1.5m/s until u reached -3m/s like it should

[2021-08-23 19:04:54] m4x : so much stuff to check..

[2021-08-23 19:05:11] m4x : also anyone know what rc_scale is for?

[2021-08-23 19:06:48] kilrah : anyway the accels are hidden, so...

[2021-08-23 19:07:03] kilrah : rc_scale is basically stick sensitivity

[2021-08-23 19:07:06] m4x : cant set them if name is known?

[2021-08-23 19:07:21] kilrah : not that i know of no

[2021-08-23 19:07:31] kilrah : would have been too easy

[2021-08-23 19:07:54] kilrah : they started hiding stuff when it was found you could bypass alt and nfz through params back in the day

[2021-08-23 19:08:07] kilrah : obviously would have been attempted to still set them

[2021-08-23 19:18:51] mefisto : collection? You mean extracted parameters from various firmwares? I don't maintain any, though some people were updating these to github.

[2021-08-23 19:27:27] fredmicrowave : @m4x The idea of sticking an empennage was to shut down motors for a fast descent from high altitude, without having the drone falling upside down, and not letting motors restart.

[2021-08-23 19:27:45] m4x : yea i get the idea

[2021-08-23 19:27:52] m4x : just a simple payload to move center of gravity

[2021-08-23 19:28:01] m4x : but it should start on the top even and flip

[2021-08-23 19:28:04] m4x : should be no problem

[2021-08-23 19:28:13] m4x : but i dont wanna try :stuck_out_tongue:

[2021-08-23 19:28:16] m4x : because shitty dji

[2021-08-23 19:28:20] m4x : probably dying in imu fial

[2021-08-23 19:28:21] fredmicrowave : Payload is heavy, empennage not that much

[2021-08-23 19:28:38] m4x : no payload doesnt need to be heavy

[2021-08-23 19:28:45] m4x : just enough to move center of gravity

[2021-08-23 19:29:07] fredmicrowave : There is a parameter on Mp1 to restart upside down, probably not available on newer drones

[2021-08-23 19:29:16] m4x : this would be key

[2021-08-23 19:29:17] mefisto : If you mean list of values to change - there were several tools which incorporated these for Ph4/Mavic. And here is an old diff from Phantom 3 (though param names probably changed since ph3).

[2021-08-23 19:45:21] m4x : Thanks

[2021-08-23 19:45:32] m4x : And yea that's what I meant

[2021-08-23 21:55:12] quad808 : hidden

[2021-08-23 23:47:19] m4x : wtf is cheat_backdoor lol

[2021-08-24 00:05:46] originaldobo007 : A porn move?

[2021-08-24 00:08:26] m4x : ``` "index" : 584, "typeID" : 0, "size" : 1, "attribute" : 15, "minValue" : 0, "maxValue" : 1, "defaultValue" : 1, "name" : "cheat_backdoor", "modify" : true },```

[2021-08-24 00:52:18] dronepilot :

[2021-08-24 04:51:06] bin4ry : i'll take another look. i think like @kilrah said it might be my sliders forcing it to a non decimal value

[2021-08-24 05:46:30] bin4ry : yah, i fixed it for setting -3.5 it was a simple gui issue. the slider i created only had ints for the "resolution" value. it made it accept 0.5 values now and it works

[2021-08-24 06:55:49] pingspike : great work on the updates @bin4ry @m4x :clap::skin-tone-2: :bow::skin-tone-2:

[2021-08-24 16:32:58] sincoder : How did you decrypt it？I tried dji_imah_fwsig.py, but couldn't decrypt it

[2021-08-24 16:40:15] sincoder : I have decrypt it , just select key manually

[2021-08-25 02:01:15] luluminjeong15 : I want to modify files in MM2, using [Drone-Hacks.com](http://Drone-Hacks.com) app adb rootshell. But I'm worried about that MM2 get broken. Has anyone accessed adb rootshell via DH and changed the contents of the file? If you have, which file have you changed? Is there a time when the drone doesn't turn on or get an error when I change the file?

[2021-08-25 03:37:02] bin4ry : @luluminjeong15 if you have this questions you should not do it. the mini2 filesystem cannot be modified directly, also not with root

[2021-08-25 04:05:03] luluminjeong15 : Umm.. I modified some files in /tmp/EMMC/..

[2021-08-25 04:08:21] luluminjeong15 : after I modified some files in there,... MM2 runs well!

[2021-08-25 04:08:58] luluminjeong15 : So I try to change some files in /etc or other directory but scared to change it.

[2021-08-25 04:22:56] bin4ry : please check mount

[2021-08-25 04:23:12] bin4ry : only tmp can be changed :wink:

[2021-08-25 04:23:53] bin4ry : for professional users i have added ability to run own scripts in dronehacks

[2021-08-25 04:24:12] bin4ry : install fcc mod. then you can create /tmp/blackbox/user.sh

[2021-08-25 04:24:42] bin4ry : this user.sh file will be executed automatically after button pressing for enabling FCC. i added this feature for professional users on request :slightly_smiling_face: you can run own scripts this way

[2021-08-25 04:25:37] bin4ry : but you CANNOT edit /usr /etc or similar directories. they are in squashFS it is not possible to edit them directly. but you can for example bind mount over them or similar by using user.sh :slightly_smiling_face:

[2021-08-25 09:09:47] elintnl : <https://youtu.be/m3Sk1UPLIVg>

[2021-08-25 09:10:00] elintnl : saw this to downgrade mini 2 firmware

[2021-08-25 13:20:31] edo : Has anyone tried to downgrade firmware for example to 01.02.0300 on Mini2? Certificate will remain?

[2021-08-25 15:15:07] flymymavic : Why would you want to

[2021-08-25 18:01:47] edo : I thought about it before because of "anti-rollback value", but in this case it doesn't make sense, because it's the same in both cases ..;)

[2021-08-25 18:40:59] tmbinc : Downgrade in general works well on Mini2, just make sure the ESC board is connected (just the raw PCB won't work). But to be clear, I fully expect DJI to switch the cert format and then bump up ARV, at which point you can't go back.

[2021-08-25 18:49:13] edo : Thank you for information. Yes, will be the changes ..

[2021-08-26 01:47:43] luluminjeong15 : Thank you for your kind reply. It was very helpful! Have a nice day! :)

[2021-08-26 08:21:52] the_lord : thanks @bin4ry for unlocking the M300

[2021-08-26 10:19:56] dronepilot : Will this certificate work on the Matrice 210 v2.0? I looked at the birdmap and didn’t find nothing for the matrice.

[2021-08-26 10:57:04] dronepilot : Thanks :clap::skin-tone-2:

[2021-08-27 10:34:35] dronepilot : Just purchased a license for mini 2. Certificate works same as air 2 and 2s to take off need to click on auto takoff on the app, and how to enable fcc?

[2021-08-27 10:37:57] bin4ry : read website: [https://drone-hacks.com/unlock-certificate](https://drone-hacks.com/unlock-certificate) button is not needed anymore in latest version. no drone needs it anymore since 1.22! :) it was only needed for 1 week, now not anymore ;) just install 1.22 hack version ! fcc you can also enable in the app, maybe check youtube :) [https://youtu.be/rvhz8cZ8mbs](https://youtu.be/rvhz8cZ8mbs)

[2021-08-27 12:27:15] dronepilot : Thanks, bin4ry : )

[2021-08-27 13:21:10] mel69hash : Woooooooot

[2021-08-28 11:14:39] azerbaijan : Mini 2 not need pressing buttons for ffc anymore?

[2021-08-28 11:40:22] bin4ry : it will most likely always need buttons. we are speaking about the button in the app not the button on the aircraft. different topic

[2021-08-28 11:59:30] azerbaijan : Thx for explaining.

[2021-08-28 14:59:43] lolo780 : M2P, auto landing also depends on battery firmware. Current firmware will have your bird stuck on 3m/s descent when battery low. I just destroyed one of my M2Ps after shutting the motors off.

[2021-08-28 15:40:52] 503496897 : How to downgrade m300

[2021-08-28 16:19:45] cantrepeat : busy busy busy!! Looks like a lot going on in here!

[2021-08-28 16:37:17] lolo780 :

[2021-08-28 16:39:20] lolo780 : M2P, stock battery, 4926m. P4P best stock 4664m

[2021-08-28 16:40:15] lolo780 : However the landing was a crash, but 5km will be no problem with older battery firmware.

[2021-08-28 16:41:21] lolo780 : So a warning to test fly each battery and don't assume you'll get 10m/s down every time.

[2021-08-28 16:58:15] tmbinc : What is the physical limitation here why DJI put in these restrictions? Unstable flight? Insufficient performance buffer for reacting to aerodynamic changes? I.e. why is this battery-related (not questioning whether it is - just asking why DJI would put this in)

[2021-08-28 16:59:56] lolo780 : To fuck with users. Restricting speed in a low battery situation is actually more dangerous.

[2021-08-28 17:00:26] kilrah : only thing i could think of is they don't trust the battery to be able to give the "kick" at the end to stop the descent

[2021-08-28 17:00:35] lolo780 : Possibly

[2021-08-28 17:01:33] tmbinc : Ah, that's a fair point

[2021-08-28 17:02:32] lolo780 :

[2021-08-28 17:02:51] lolo780 : 16.8 m/s upsidedown on to pavement

[2021-08-28 17:03:09] originaldobo007 : But camera still working!

[2021-08-28 17:03:18] lolo780 : Nope

[2021-08-28 17:03:35] originaldobo007 : It looks upside down in the live feed?

[2021-08-28 17:03:35] lolo780 : Broke the fan blades off

[2021-08-28 17:03:50] lolo780 : That was the last Fram

[2021-08-28 17:03:53] lolo780 : Frame

[2021-08-28 17:04:03] lolo780 : The gimbal bent

[2021-08-28 17:04:16] lolo780 : And M2P gimbals are junk

[2021-08-28 17:04:42] originaldobo007 : Uggghhh. Well, put it this way: you are clearing your fleet for an M3!

[2021-08-28 17:05:02] originaldobo007 : Aren’t M2 gimbals better than P4P gimbals?

[2021-08-28 17:05:13] lolo780 : Yes

[2021-08-28 17:05:21] lolo780 : Which isn't saying much

[2021-08-28 17:05:59] originaldobo007 : Wonder what the quality of the Air2S gimbal is. I’ve never had problems with it.

[2021-08-28 17:06:39] lolo780 : Smashed in. Main controller error, IMU, gyro, no camera feed

[2021-08-28 17:06:46] originaldobo007 : Lolo- you should send it into DJI and say there was a defect. See if they will review the flight logs. :laughing:

[2021-08-28 17:06:55] lolo780 : Hahah

[2021-08-28 17:07:09] lolo780 : It's my fault for not testing

[2021-08-28 17:07:29] originaldobo007 : So at low RTH it just was stuck at 3m/s?

[2021-08-28 17:07:57] originaldobo007 : *low battery.

[2021-08-28 17:08:08] originaldobo007 : It wouldn’t go faster?

[2021-08-28 17:08:33] lolo780 : Yeah, at 10% batt it went from -10 to -3

[2021-08-28 17:09:05] originaldobo007 : Oh fuck. That’s a long painful descent when you were going down realizing what was going to happen.

[2021-08-28 17:09:33] lolo780 : Going to change to shell, camera, GPS, left front arm, and hopefully it'll fly again

[2021-08-28 17:09:54] lolo780 : I shut the motors off but the AC flipped over

[2021-08-28 17:10:02] originaldobo007 : You have a repair shop with spare parts there!

[2021-08-28 17:10:12] lolo780 : And of course DJI fucks people again by disabling restart

[2021-08-28 17:10:31] lolo780 : Yeah I stock spares of everything.

[2021-08-28 17:12:34] originaldobo007 : I wonder if someone will ever do a suicide flight- ascend until it won’t go higher. Let it fall into water or a remote area or something. Get a world record altitude flight with a DJI.

[2021-08-28 17:12:35] lolo780 : This Ronin 2 went to DJI with a minor issue. They said they couldn't fix it and now it's worse. Fuck DJI. I2 is an expensive crash. Pilot clipped a tree, ripped off an X7 and lost the cam. Arborist had to climb a tree to get the body back.

[2021-08-28 17:13:11] originaldobo007 : That’s fucking expensive.

[2021-08-28 17:13:23] originaldobo007 : Lost an X7? Ouch.

[2021-08-28 17:13:41] lolo780 : The barometer doesn't read above 10km

[2021-08-28 17:13:57] lolo780 : That's why the record is 10,340m

[2021-08-28 17:15:30] lolo780 : A molded M1P could go 12km high, but you want get an altitude reading.

[2021-08-28 17:15:39] lolo780 : Won't

[2021-08-28 17:15:54] originaldobo007 : Need to put a tiny altimeter in and recover it.

[2021-08-28 17:16:17] lolo780 : At that point, might as well build one like Dennis

[2021-08-28 17:17:12] originaldobo007 : Incredible. Highest I ever got my P4P2 was 3.5km

[2021-08-28 17:17:49] originaldobo007 : Was too scared to go higher.

[2021-08-28 17:19:08] lolo780 : [https://youtu.be/k6QL0VjqYgI](https://youtu.be/k6QL0VjqYgI)

[2021-08-28 17:19:14] lolo780 : Still the king

[2021-08-28 17:21:07] originaldobo007 : Those Russians. Crazy.

[2021-08-28 17:22:36] originaldobo007 : You can hear the audible rpm difference as it goes higher.

[2021-08-28 17:22:50] originaldobo007 : I wonder what his ascent and descent speeds were.

[2021-08-28 17:23:58] lolo780 : Actually if he didn't use position hold, he would have gone a lot higher. You need a driver to chase it. Same with descent, just shut down and let it drop with the wind. Drive to the landing zone.

[2021-08-28 17:24:59] lolo780 : Even if the DJI barometer wasn't a limit, the hacked certificate is only good to 12km.

[2021-08-28 17:26:04] originaldobo007 : True. Someone should suicide up a P4P to 12km. One thing that always bugged me about the P4P was a specific bug. They never flew laser straight.

[2021-08-28 17:27:08] lolo780 : Yeah, I hate that. I got a P4P obsidian here that I barely fly. Such a piece of shit.

[2021-08-28 17:27:28] originaldobo007 : Take it up to 12km and kill it.

[2021-08-28 17:27:37] originaldobo007 : :laughing:

[2021-08-28 17:27:44] originaldobo007 : Teach it a lesson.

[2021-08-28 17:29:06] lolo780 : I wanted to build a quad with DJI fpv, but that has a distance limit too. Not sure what it is now. Mavic Air 2S is 19km I think.

[2021-08-28 17:29:38] originaldobo007 : It’s really odd that they put a limit in.

[2021-08-28 17:29:47] lolo780 : The original FPV air units would cut out around 6.5km.

[2021-08-28 17:30:27] originaldobo007 : There is some Swedish guy on YouTube who always does one way trips and figures out what the limit is.

[2021-08-28 17:31:13] lolo780 : Yeah. So to go 13km high and 13km downrange is going to be right at 19km

[2021-08-28 17:40:01] lolo780 : Yeah, or DJI could stop fucking removing features like manual mode, motor restart

[2021-08-28 18:32:38] lolo780 : Have the dropped battery fly back to the home point, Space X style. :joy:

[2021-08-28 19:56:59] originaldobo007 : That would be amazing - another battery activated by the failing first battery.

[2021-08-28 23:41:09] horrible.programmer.e : dang y’all already trying to get the record for highest consumer drone?

[2021-08-28 23:41:45] horrible.programmer.e : iight, no worries @lowellfoo780 I have an idea I’m not going to share, now that I see ur competition

[2021-08-28 23:42:35] horrible.programmer.e : @originaldobo007 someone did 11km

[2021-08-28 23:42:49] horrible.programmer.e : scuse me, 11,000 feet

[2021-08-28 23:43:00] horrible.programmer.e : probs like 5km?

[2021-08-28 23:43:32] horrible.programmer.e : 3280.84 ft /km, so not even 4km

[2021-08-28 23:43:57] horrible.programmer.e : meh I think I can top that honestly I’m not even being cocky

[2021-08-28 23:45:13] elvin.yx : Folks can DH flash controller FW? flashed 01.00.0100 on the bird but the controller is on 0200. Just want to get the versions aligned although things seem to all work

[2021-08-28 23:48:05] horrible.programmer.e : what makes u assume ur flashing?

[2021-08-28 23:48:28] horrible.programmer.e : like is it just upgrading the software or ur actually flashing the EPROM

[2021-08-29 00:26:43] originaldobo007 : I no longer have my P4P2. And the Air2S is limited to -6m/s descent so 3km is the limit. Having said that, I don’t think you will beat @lowellfoo780 ‘s legendary M1 altitude flight. I think it’s in the history books already.

[2021-08-29 00:53:48] lolo780 : I think I used assistant to flash the controllers

[2021-08-29 01:02:14] mel69hash : You mean AIR 2S flies 19km. More than MP. Does the motor restart if it is inverted or flip

[2021-08-29 01:45:13] dronepilot : Today i upgraded a M2P .100 to .770 fw no need anymore to keep .100fw so in love with the certificate. Bought 9 license just this month :face_with_hand_over_mouth:

[2021-08-29 01:51:13] elvin.yx : Somehow assistant did not recognized my controller.. Will try again later. been sick of the screaming noise of the controller, wanted to see if there is a way to silence it lol. BTW thanks again for the params I was able to increase descent rate & disable auto landing. you da best!

[2021-08-29 02:00:22] lolo780 : :sunglasses: :+1:

[2021-08-29 06:13:06] bin4ry : @elvin.yx i don’t supper flashing of controllers (only one exception but that does not matter). normally it is not needed, if you want to flash it do the update from the app, don’t connect the drone it should be able to update the controller alone . if you don’t want that use assistant, or can flash them definitely

[2021-08-29 08:29:08] lolo780 : Any way to downgrade battery firmware on M2?

[2021-08-29 09:15:03] bin4ry : remove all files from the tar archive except battery firmware. it should then only flash battery

[2021-08-29 10:46:23] kilrah : need to hope the change wasn't before 510

[2021-08-29 17:34:32] lolo780 : No way to go to battery firmware below 510?

[2021-08-29 19:56:26] dronepilot : You can downgrade the firmware on dji assistant from 770 to 300 firmware no problem at all M2 bird. If you have extra battery just insert each and update firmware incompatible.

[2021-08-29 20:24:57] lolo780 : It wouldn't let me go below 510

[2021-08-29 22:07:00] dronepilot : Here I’ve done 2 x 770 downgrade to 300 no issue at all.

[2021-08-29 22:38:37] lolo780 : Hmm.. DH says anti rollback no good

[2021-08-29 22:44:44] lolo780 : I will try another M2P which is still on 400

[2021-08-29 23:25:16] dronepilot : Dji assistant @lowellfoo780 only way to go under 510 and max 300fw.

[2021-08-30 00:01:56] lolo780 : Thx, will downgrade once my wreck is fixed.

[2021-08-30 00:05:33] lolo780 : DJI dealers can get retail display units, and the M2 in particular is great because the motors can be swapped easily into new arms. With a display model you get small hinge parts that no longer come with replacement arms like the M1P did.

[2021-08-30 00:06:27] lolo780 : As well as a full exterior hardware set, gimbal assembly, motor bells etc.

[2021-08-30 00:06:53] lolo780 : Oh and comes with props. All for $60

[2021-08-30 00:07:52] lolo780 : Smart dealers 'lose' their display units often :laughing:

[2021-08-30 00:09:36] lolo780 : Display RC also has spare sticks and 5D button

[2021-08-30 03:40:04] bin4ry : there are multiple fw with ARB values floating around

[2021-08-30 03:40:16] bin4ry : in DDD there is only the ARB 0 version

[2021-08-30 03:40:39] bin4ry : assistant offers the ARB 1 version as they want to force people to arb 1

[2021-08-30 04:55:26] lolo780 : That might be the issue

[2021-08-30 04:55:30] lolo780 : Fuck DJI

[2021-08-30 05:14:05] bin4ry : i have the arb1 fw 300

[2021-08-30 05:14:16] bin4ry : i send it to you in a PM, i do not want it floating around

[2021-08-30 05:14:28] bin4ry : people might accidently update since the common sensus is that 300 is ARB0

[2021-08-30 05:14:56] bin4ry : which is just not true, but somehow this story keeps being told. so i keep this file private before someone cries

[2021-08-30 11:30:57] flylusive_pat : If you have adapter EV2300. Flash firmware TSENC inside TRB

[2021-08-30 11:32:10] flylusive_pat : @lowellfoo780 Yes u can downgrade the battery firmware to any version as long as you have the correct fw, it doesn’t depend on drone. Flash it with TRB

[2021-08-30 11:33:36] bin4ry : General notice: DJI FPV update 01.02.0020 does NOTHING except changing the certificate mechanism. DO NOT UPDATE! You can stay on your current firmware indefinetly if you want to enjoy the hacks :slightly_smiling_face:

[2021-08-30 11:35:35] flylusive_pat : @lowellfoo780 M2P - firmware 01 00 0100

[2021-08-30 11:35:37] flylusive_pat : if that is what you asked for

[2021-08-30 17:43:29] lolo780 : Interesting they rolled out the FPV first

[2021-08-30 19:30:03] quad808 : so, just for science, I downloaded and updated the fly app to 1.4.8 V1120 from here: <https://www.dji.com/downloads/djiapp/dji-fly> with file name: 1625189064256-DJI-v1.4.8-210701-1120-48346-official-sec.apk Then proceeded to check and update the cert from DH using V 1.22. (current version), then tested my Mini2 on firmware 1.03.0000. I can confirm the cert is working 100%, but can't confirm that flying a mini 2 really, REALLY high in clouds may result in lots of moisture on the mini when it comes back for landing, making your video and pictures just suck ass. I can confirm however the Mini 2 is a fantastic little beast of a drone.

[2021-08-30 19:31:08] lolo780 : At least the mini isn't like the spark which will think it can land on clouds

[2021-08-30 19:31:21] m4x : lol was that a thing?

[2021-08-30 19:31:57] lolo780 : Yes. When you descend, the spark would say height 0 and stop

[2021-08-30 19:33:17] tmbinc : lol

[2021-08-30 19:34:18] quad808 : imagine that....I found an ejected SD card

[2021-08-30 19:34:24] lolo780 : Stock battery spark, 3.33km high. Descent stability not great.

[2021-08-30 19:35:05] validat0r : Just switch off downwards sensor.

[2021-08-30 19:35:40] validat0r : CSC works with spark, 10m/s descent bo problem with spark.

[2021-08-30 19:37:01] loaderbull : Must be a serious problem this ejected SD card thing, DJi need to fix this asap :grin:

[2021-08-30 19:38:51] tmbinc : Yeah, I've heard they tried with the new FPV firmware

[2021-08-30 19:39:14] m4x : not burning a fuse is questionable

[2021-08-30 19:39:22] m4x : unless they dont trust their impl

[2021-08-30 19:39:48] tmbinc : I think they will add that pretty quickly - they've previously re-released firmware with just a ARV bump

[2021-08-30 19:40:05] m4x : lol

[2021-08-30 19:40:44] lolo780 : I removed them

[2021-08-30 19:42:42] quad808 : I have a theory.....DJI FPV drones probably have like ZERO requests for unlocking certs, hence the firmware update

[2021-08-30 19:46:25] m4x : they already broke all once

[2021-08-30 19:46:31] m4x : so whats another time..

[2021-08-30 19:46:58] m4x : shouldve done fw upgrade to begin with

[2021-08-30 19:47:01] loaderbull : And i bet there was uproar too…

[2021-08-30 19:47:06] lolo780 : I'm looking for a crashed FPV drone. Build it into a larger frame.

[2021-08-30 19:47:33] lolo780 : Seems like the FPV can go at least 15km away from the RC

[2021-08-30 19:47:52] lolo780 : Possibly 19km limit like air 2S

[2021-08-30 19:48:52] m4x : and how far can it actually fly? lol

[2021-08-30 19:49:09] lolo780 : I saw 15km on YT

[2021-08-30 20:04:38] sincoder : [https://youtu.be/9EZrOislEks](https://youtu.be/9EZrOislEks)

[2021-08-30 20:05:28] sincoder : I also did a 10k flight after the Russian

[2021-08-30 20:06:58] sincoder : But then the Russian flew to a height of 12k:joy:

[2021-08-30 20:09:41] lolo780 : Maybe DJI FPV could go to 12km

[2021-08-30 20:10:15] sincoder : Wind speed is important, above 7k, wind speed often exceeding 20m/s

[2021-08-30 20:11:56] sincoder : Just build a drone use the dji fpv utility

[2021-08-30 20:16:04] lolo780 : Wind can help generate lift

[2021-08-30 20:16:04] sincoder :

[2021-08-30 20:20:53] sincoder : However, if the wind speed is too high, the drone will fly too far and it is almost impossible to return. My previous failure was because the wind speed was too high. I encountered a maximum wind speed of 28m/s.

[2021-08-30 20:21:37] sincoder : The drone was quickly blown 10km away

[2021-08-30 20:21:47] lolo780 : Chase it in a vehicle

[2021-08-30 20:23:02] lolo780 : Also take off upwind. I use this and Windy. [https://www.markschulze.net/winds/](https://www.markschulze.net/winds/)

[2021-08-30 20:26:18] sincoder : Good idea, you need a large enough area, and the wind direction at high altitude is different from that on the ground.

[2021-08-30 20:27:37] sincoder : I encountered the opposite wind direction, the drone was blown away and then blown back at high altitude

[2021-08-30 20:35:28] lolo780 : Face into the wind for lowest drag, and use the translational lift to your advantage. DJI is default props in rotation, so the front props can get maximum lift in the clean outboard airflow.

[2021-08-30 21:58:48] lolo780 : Maybe they think FPV guys are dumb

[2021-08-30 22:23:53] oakley75 : @bin4ry May I make a suggestion to change the name that shows up on our credit card charges from drone-hacks to something more benign like DH?

[2021-08-30 22:26:59] originaldobo007 : You could fuck with people and have the credit card charge called “gigantic dildos, llc”.

[2021-08-30 23:27:08] oakley75 : Lol dang

[2021-08-31 04:27:32] bin4ry : @reoak if we change it to DH people will (again) no understand who charged them, had this discussions already :wink: are you afraid of the name on your CC statement? :smile:

[2021-08-31 13:20:51] oakley75 : Missed the previous discussion my bad. In general I guess I like to lie low :grin: Thanks for all you do though

[2021-08-31 13:21:47] fredmicrowave : I suppose it doesn´t sound too good when you run a business, to see on you bank extract that you have paid for something related to hacking :smile:

[2021-08-31 13:25:06] bin4ry : @reoak there was none public discussion, but private with customers and their banks/paypal :wink: because people tend to buy and forget what they buy :smile:

[2021-08-31 13:25:35] bin4ry : @fredmicrowave lol. fair point. but it is what it is :wink:

[2021-08-31 13:47:12] fredmicrowave : Loool that parasitic link @bin4ry :rolling_on_the_floor_laughing:

[2021-08-31 13:47:38] fredmicrowave : Beautiful eyes

[2021-08-31 13:58:01] bin4ry : how tf did that happen

[2021-08-31 14:25:26] m4x : ```[point.it](http://point.it)```

[2021-08-31 22:06:22] cantrepeat : All of you need to remember, I was the first person to dock a Mavic with the international space station!! suck it!

[2021-08-31 22:08:45] lolo780 : My booster idea for the M2P :joy:

[2021-08-31 22:31:50] cantrepeat : @lowellfoo780 so legit!!

[2021-08-31 22:47:26] fredmicrowave : Just put it on top and no release mechanism needed :smile:

[2021-09-01 01:00:41] elvin.yx : I accidentally used another phone which was connected to internet when I flied my M2P today and later saw the prompt for "link cell phone", and the bird was limited to maximum range of 50m only... Folks is there anything I can do to fix it? Should I just connect the app and register my phone number?

[2021-09-01 01:01:28] elvin.yx : Height was not limited tho and I was able to go up pretty high

[2021-09-01 02:10:22] 503496897 : mavic air doesn't work

[2021-09-01 11:46:58] fredmicrowave : As soon a drone knows he can fly, it will never work again.

[2021-09-02 07:46:28] bin4ry : air2 and air2s firmware update available. DO NOT UPDATE

[2021-09-02 10:01:01] dronepilot : What firmware version, can you share the number please.

[2021-09-02 10:15:19] bin4ry : air2 650 , air2s2060 i think

[2021-09-02 10:15:53] bin4ry : can look when home again

[2021-09-02 13:13:27] pingspike : funny to see DJI rushing out updates like this

[2021-09-02 13:13:34] pingspike : it’s just like the old days :blush:

[2021-09-02 14:54:43] azerbaijan : Is it possible get rid of forced landing on mini 2 when red level of battery reached?

[2021-09-02 15:45:01] lolo780 : Try zeroing out battery parameters and find out

[2021-09-02 22:01:41] andrwho25 : when was the last dji FPV version released that blocked the exploit?

[2021-09-02 22:34:00] lolo780 : Few days ago?

[2021-09-02 22:43:34] dronepilot : @andrwho25 i have dji fpv running on latest firmware with certificate + fcc no problem at all.

[2021-09-02 22:44:53] loaderbull : Even after updating to the latest one released a few days ago?

[2021-09-02 22:46:49] dronepilot : I didn’t update with the certificate. This Sunday i installed the certificate on the fpv i checked it was on the last firmware on that day.

[2021-09-02 22:47:36] loaderbull : Just wanted to clarify as @bin4ry has stated not to update due to it disabling hacks etc. On blog and front page of DH website…

[2021-09-02 22:48:56] dronepilot : Yes it won’t go for any update any more as everything is working flawlessly.

[2021-09-02 22:53:22] andrwho25 : ah ok cool. how long does the cert go for ?

[2021-09-02 22:55:38] lolo780 : 2030

[2021-09-03 05:02:08] elvin.yx : What's the ISO and shutter speed?

[2021-09-03 05:47:29] bin4ry : seems dji removed the firmware versions for air2 and air2s after i put up the announcement. very strange, we will see

[2021-09-03 08:39:17] lolo780 : Back to the drawing board

[2021-09-03 11:14:13] originaldobo007 : :laughing:

[2021-09-03 11:28:50] fredmicrowave : Probably going to make something that updates as soon as you go online :face_with_rolling_eyes:

[2021-09-03 12:44:43] mefisto : There was a time they did that in Phantom 3. The mobile app welcomed you with a message about update, and there was no way to close it, only one big button to begin the update. There was some backlash, but not a massive one. I just modified some XML (or was it json?) files on the phone, and it was back to flying - my firmware was old enough that it didn't supported locking the drone itself.

[2021-09-03 12:51:02] pingspike : was it the Spark they grounded years ago? and forced a firmware update on people?

[2021-09-03 12:54:04] originaldobo007 : My guess is that there will be a forced fw update. I bet they will do that.

[2021-09-03 15:10:35] fredmicrowave : Well one way is not going online ever. Not that hard...

[2021-09-03 17:18:42] d95gas : Yep either firewall on the tablet/phone or just dont go online

[2021-09-03 17:18:57] d95gas : thats what we had to do in the early days with MP

[2021-09-03 17:35:54] mail451 : Here's the test for local data mode on DJI Fly, will it let you fly? Will it ping DJI servers?

[2021-09-03 21:34:05] fredmicrowave : Not sure what you mean, but Fly in total offline mode works perfectly. No sim card in phone, wifi off, plus airplane. GPS usually off too, to spare battery.

[2021-09-03 21:35:49] fredmicrowave : I don´t need GPS anyway if i dont use maps .

[2021-09-03 21:48:57] oakley75 : I think he's saying this would be the ultimate test to see if DJI is still running home even in local data mode.

[2021-09-03 21:49:29] oakley75 : Offline FTW though

[2021-09-03 22:27:26] amurmurmur : DJI FPV new firmware patches all the exploits ?

[2021-09-04 03:45:52] monkeyman : P4 Multispectral, can it unlock certificate? @bin4ry Thanks!

[2021-09-04 06:07:29] bin4ry : see website, do not update!

[2021-09-04 06:07:45] bin4ry : if not in birdmap then no :wink:

[2021-09-04 18:49:57] amurmurmur : Anybody tried changing the LED settings of the drone. I hate the christmas lights action going on with the back leds

[2021-09-04 18:50:11] amurmurmur : whats the name of the parameter

[2021-09-04 19:14:14] heresmydron : `forearm_led_ctrl|g_config.misc_cfg.forearm_lamp_ctrl`

[2021-09-04 19:14:26] heresmydron : its a bitmask but im sure the value youre looking for is `0` :slightly_smiling_face:

[2021-09-04 19:15:18] heresmydron : for some reason DH doesnt save the parameter correclty (at least not for me) you'll have to use comm_og_service_tool

[2021-09-04 21:52:46] originaldobo007 : I put the value at 0 on my Air2S on DH and it turns them off fine.

[2021-09-04 22:27:12] heresmydron : do they stay off even while flying?

[2021-09-04 23:07:34] originaldobo007 : One of the pairs does. I believe it’s the back ones and the front just periodically blinks green. Much less intrusive than the Xmas blinking.

[2021-09-05 15:19:36] flymymavic : So some cheeky bastard has decided to take drone hacks and sell how to do it as a service for £15 i had to message him here is his replies

[2021-09-05 15:19:54] flymymavic :

[2021-09-05 15:20:27] flymymavic :

[2021-09-05 15:25:27] lolo780 : :laughing:

[2021-09-05 15:32:46] pingspike : > *you're

[2021-09-05 19:22:15] quad808 : legendary response video...LOL <https://www.youtube.com/watch?v=HvuQ-Vq-dW0>

[2021-09-05 19:22:47] quad808 : that guy is a douche bag

[2021-09-05 19:52:23] mail451 : lol

[2021-09-05 21:17:06] originaldobo007 : That guy is a human steroid bag with prison tattoos.

[2021-09-06 00:37:27] originaldobo007 : That response to Mike truly is legendary. I’m so glad he called out the raspy bag of steroid and prison wine that spawned forth as “Mike from Accelerated Heights”.

[2021-09-06 11:20:13] amurmurmur : Thanks a lot for your help, this drone can turn into a ninja drone with all the lights off lol xD Dont think it would be super safe to do so at night, might even crash it without realising it xD

[2021-09-06 13:27:59] heresmydron : no worrie

[2021-09-06 14:14:18] mel69hash : Anyone knows what's this for on MM2 Level2_smart_battery_landlg_config.voltage2.level2_smart_battery_land default value is 10 and max is 100. If change to 100 can anyone here share what will happen. TIA

[2021-09-06 21:46:56] amurmurmur : I dont think there is a point in messing with the smart battery properties, since its already managed well enough, otherwise you might mess with the draw power etc, that might affect the life expectancy of your battery

[2021-09-07 00:31:13] lolo780 : I crashed an M2P due to unpredictable auto landing speed. Normally -10m/s with modified parameters, but somehow I had one flight that locked at -3 descent under 10% battery.

[2021-09-07 00:31:54] lolo780 : So you definitely want to disable that bullshit. The last thing you want your aircraft doing in a low better situation is flying slower.

[2021-09-07 00:32:02] lolo780 : Battery

[2021-09-07 06:52:05] plaaggeest : It would be annoying if DJI pushes a Go4 update with an FW update embedded in the app. So will need to treat app updates with caution

[2021-09-07 06:57:54] pingspike : when was the last time they updated GO4?

[2021-09-07 06:58:10] pingspike : I think they’re done with that app now @plaaggeest

[2021-09-07 06:59:41] pingspike : it’d be very easy for DJI to ground a drone via the app though if the drone firmware version doesn’t meet a specific version number or the checksum of a few parameters doesn’t match :pensive:

[2021-09-07 11:58:10] fredmicrowave : But I suppose that would rule out 3rd party apps ...

[2021-09-07 18:02:01] quad808 : I don't know what it is, but that ejected SD card thing apparently is really going around....

[2021-09-07 18:13:14] quad808 :

[2021-09-07 19:26:37] originaldobo007 : I keep on finding SD cards all over the place as well!

[2021-09-07 22:41:36] mel69hash : Found this sd card too

[2021-09-08 00:35:26] originaldobo007 : Hat tip to whomever recorded that footage on the lost SD card! Beautiful!

[2021-09-08 00:36:25] originaldobo007 : Strangely enough, I found this random SD card on the ground as well! It had this image on it.

[2021-09-08 00:40:51] originaldobo007 : Guys Has this ever happened to you? I was walking down the street, minding my own business when some random dude ran up to me. He handed me an SD card- and said nothing. Just ran away. Anyhow, I pulled these off the SD card: Anyhow, just wondering if any of you had the same experience of these random guys handing you SD cards. Feel free to share any photos from these random SD cards. :+1::skin-tone-3:

[2021-09-09 05:09:43] lolo780 : [https://youtu.be/FxOhOonqwcI](https://youtu.be/FxOhOonqwcI) Found this one today

[2021-09-09 05:14:00] lolo780 :

[2021-09-09 17:05:28] originaldobo007 : What a fantastic find! What’s your best guess as to how high that SD card went?

[2021-09-09 20:21:09] lolo780 : 7km

[2021-09-09 20:25:29] lolo780 : [https://www.technik-consulting.eu/en/problem_solving/drone_altimeter.html](https://www.technik-consulting.eu/en/problem_solving/drone_altimeter.html) Using this method

[2021-09-09 21:25:10] quad808 : now that is very cool thinking from that site...

[2021-09-09 21:25:25] quad808 : I guess math does come in handy once in a while...hehehehe

[2021-09-09 23:41:51] originaldobo007 : Found this SD card today:

[2021-09-09 23:42:01] originaldobo007 :

[2021-09-10 07:39:34] mail451 : Damn DJI has a lesser problem than GoPro, ejected the battery instead of SD card... [https://petapixel.com/2017/02/01/gopro-karma-back-power-loss-caused-battery-clasp/](https://petapixel.com/2017/02/01/gopro-karma-back-power-loss-caused-battery-clasp/)

[2021-09-10 14:12:21] fredmicrowave : Drifting hidden between layers of clouds, this is where I live :)

[2021-09-10 15:04:11] pingspike : :scream::man-bowing::skin-tone-2::heart_eyes:

[2021-09-10 17:12:44] tsun : looks like it's raining memory cards everywhere :smile:

[2021-09-10 19:02:04] tsun : btw do they indicate that drones were used with stock batteries, or modded? I can't imagine stock being able to do 7km vertically

[2021-09-10 19:43:34] lolo780 : Stock M1P can do 6.5km tops on stock battery

[2021-09-10 19:44:11] lolo780 : Stock M2 about 5km

[2021-09-10 19:50:47] tsun : good to know, thanks

[2021-09-10 21:57:53] fredmicrowave : Is sport mode better to go higher ? I guess it could kill batteries, specially in modded sport mode ...

[2021-09-10 22:20:55] lolo780 : ATTI or manual is best

[2021-09-11 08:39:32] edo : It depends on the speed of the climb. I did some measurements with the Mini2. At climb of 4m/s, the current from the battery is approx. 7A and the battery consumption is approx. 25% to reach a height of 1000m. At climb of 5m/s, the current from the battery is approx. 7.8A and the battery consumption is approx. 20% to reach a height of 1000m. (used Li-Ion Battery from MM)

[2021-09-11 08:44:34] edo :

[2021-09-11 11:46:00] 007 : how ?

[2021-09-11 17:24:30] dronepilot : Any way to remove autolanding air 2s? Did check battery type only gives 1 value.

[2021-09-11 17:45:58] heresmydron : `bat_enable_smart_bat_landing_protect`

[2021-09-11 17:46:12] heresmydron : RC will beep at you when its time to RTH

[2021-09-11 17:46:35] heresmydron : but wont force land, even if you are at 0%

[2021-09-11 17:47:12] lolo780 : Test descent speed during low battery warnings carefully

[2021-09-11 17:57:33] heresmydron : what do you mean

[2021-09-11 18:11:09] lolo780 : This is what happens when it goes into limp mode. -3 instead of -10 descent randomly.

[2021-09-11 18:11:50] lolo780 : 5 batteries, only one did it, and unfortunately it's destroyed. M2P. Updating other batteries to latest firmware has not replicated the issue.

[2021-09-11 18:12:12] heresmydron : oh shit

[2021-09-11 18:12:59] heresmydron : a2s is stupid slow to descend so i usually bring it down at 50%

[2021-09-11 18:57:53] dronepilot : @heresmydron what value on the air 2s? `bat_enable_smart_bat_landing_protect`

[2021-09-11 19:00:19] lolo780 : A2S does -6 even in RTH

[2021-09-11 19:01:09] heresmydron : @rgf8aerial `0`

[2021-09-11 19:01:45] heresmydron : -6 is 20kph/12mph right? too slow compared to the A2's -10

[2021-09-11 19:24:55] lolo780 : Agreed, -6 is slow, but sure beats the mini 2.

[2021-09-11 19:29:08] originaldobo007 : -6 is 13.4 mph. It's not awful, but I wish the descent could be -7 or -8. Hopefully the M3 will achieve that. But that's what essentially limits the Air2S to about 10,000 ft max altitude. Having said that, you can stop the auto land with the smart_bat_landing param. BUT, it has some battery protection mechanisms built in that if you drain it really low, it will limit power and limit the horizontal and descent speeds below the -6. Just be a little careful.

[2021-09-11 19:45:21] lolo780 : Yep. Below 500m if you turn the hacked certificate off in flight it restored -10 descent on my M2P. Best to target 10% battery on landing. My crash destroyed a whole M2P cam assembly, battery, motors, GPS, downward sensors. Refused the core board.

[2021-09-11 19:45:30] lolo780 : Reused

[2021-09-11 19:45:56] m4x : touch the sun, get burned :stuck_out_tongue:

[2021-09-11 19:47:25] lolo780 : Yeah. Also test fly with a safe landing area. I had a few square KM to work with. I put the AC over the home point and CSC motors off. You can't restart the M2P below 10% batt anyways, but if the AC is powered on, you can track the GPS to recover the wreck.

[2021-09-11 19:47:46] m4x : yea youd want several rally points to emergency land

[2021-09-11 19:47:52] m4x : for every predicted wind direction

[2021-09-11 19:48:12] lolo780 : Also if you run the battery out, you won't know if it'll crash right into you

[2021-09-11 19:48:33] m4x : either way, always recommended to fly in specs, all u need is some flight data and some math

[2021-09-11 19:48:40] m4x : and u know what u can potentially handle

[2021-09-11 19:49:28] m4x : It's like some people forget height is also distance

[2021-09-11 19:49:47] lolo780 : M2P will land from 900m at 10% battery and -3 descent.

[2021-09-11 19:50:10] m4x : Battery management is part of the game

[2021-09-11 19:50:12] lolo780 : So if you're above that, you're going to crash

[2021-09-11 19:50:17] m4x : If you know it you work around it

[2021-09-11 19:50:46] m4x : I'd feel uncomfortable with 10% at nearly 1km

[2021-09-11 19:50:59] m4x : Probably want at least 20%

[2021-09-11 19:51:21] m4x : If you fly too far you have troubles coming back

[2021-09-11 19:51:34] m4x : It's the same, just with limited params

[2021-09-11 19:52:33] lolo780 : Yeah, that was just a test over a big field

[2021-09-11 19:53:11] m4x : just giving general advice how to deal with such a case, not pointing a finger at your case :wink:

[2021-09-11 19:53:46] m4x : unlocking higher descent speeds, even at 10% at 900m would still be pushing it in my book

[2021-09-11 19:53:48] lolo780 : I wonder if there's a way to recal the BMS

[2021-09-11 19:54:23] m4x : generally, yes. Some have specific clears for calibration (for that usually turn on the integrated FET for shipping mode) or do several full discharge and charge cycles

[2021-09-11 19:55:14] m4x : ofc that doesnt work if u externally charge

[2021-09-11 19:55:25] m4x : it monitors how much goes in and how much goes out

[2021-09-11 19:55:27] m4x : it would want both

[2021-09-11 19:55:37] m4x : at least for your average batt circuit

[2021-09-11 19:56:38] lolo780 : From 10%, the M2 has a lot left. I landing this flight at the home point.

[2021-09-11 19:56:58] m4x : if its a lot out of whack, it would stick around "forever" at 0%

[2021-09-11 19:57:03] m4x : until voltage says nope

[2021-09-11 19:57:50] lolo780 : Over 2 min of horizontal flight. Which is probably 5+ min of descent at 10m/s

[2021-09-11 19:58:29] m4x : "lot"

[2021-09-11 19:58:33] m4x : tell that the wind

[2021-09-11 19:59:15] m4x : under ideal circumstances, maybe.

[2021-09-11 19:59:53] m4x : tbh the savest way would probably using emergency break

[2021-09-11 20:00:02] m4x : as long it can regain control

[2021-09-11 20:00:20] m4x : but i am still not fully sold on that

[2021-09-11 20:00:48] lolo780 : Agreed.

[2021-09-11 20:03:31] m4x : also a option would be adding a payload that the drone cant lift beyond a certain voltage anymore

[2021-09-11 20:03:44] m4x : would need to be precisely tested tho

[2021-09-11 20:03:49] m4x : but that will decrease overall perf

[2021-09-11 20:04:09] m4x : but maybe if your batt pack is big enough..

[2021-09-11 20:04:10] m4x : lol

[2021-09-11 20:04:11] lolo780 : I don't even know if this is still the stock record, but 12.3km x 2, stock battery M2P

[2021-09-11 20:11:02] lolo780 : So I wonder if altitude will be unlockable on the M3....

[2021-09-12 02:12:26] mel69hash : Anyone knows what sensor is this in Mini 1

[2021-09-12 02:31:01] m4x : i think it was baro?

[2021-09-12 02:34:42] m4x : From Mini 2

[2021-09-12 02:53:56] lolo780 : Looks like the compass?

[2021-09-12 02:59:32] lolo780 : I think the baro is on the GPS module under a bit of foam

[2021-09-12 03:32:21] mel69hash : Hmmm you could be right

[2021-09-12 06:37:19] asdrubale : Compass cut it and you will see

[2021-09-12 07:52:24] mingtao : it is compass 100%

[2021-09-12 18:46:51] tobimimer : Hello, is it possible to activate the FCC mode on power on without having to press the button? I am using the Mini 2. Also, how can I check if the FCC mode actually is active?

[2021-09-12 19:06:22] mail451 : Usually on the DJI Fly app it would be if the freq chart line is between 1KM and 4KM

[2021-09-12 19:46:47] loaderbull : For my A2S only the text moves. The lines stay the same. So text is out of sync with the 1 and 4km lines :+1:

[2021-09-12 23:52:08] sysdefwonder : Hello, i'm searching for the ip net (192.168.???.10) of the mini 2 controller (PC-USB-LAN->RC-USB). i tested 192.168.3.0/24 and 192.168.42.0/24 from what i found on a research

[2021-09-13 07:59:40] tmbinc : Mini2 controller doesn't expose/have RNDIS, only DUML serial ports

[2021-09-13 11:00:54] sysdefwonder : i think i found that DUML thing ttyACM0 and ttyACM1. tried to read from ttyACM0 with different serial settings but all i get is crap

[2021-09-13 11:01:46] sysdefwonder : so the only way to get root is a modified firmware? i only find people who are manipulating the drone and none who try to crack the controller

[2021-09-13 13:21:32] tmbinc : The controller shouldn't help you in getting root - you can just use the USB port on the device if you want to send DUML.

[2021-09-13 13:21:50] tmbinc : Or what exactly is your goal? The controller - unlike the rc160 - doesn't run Linux.

[2021-09-14 13:52:33] sysdefwonder : my goal is to control the drone by a program running on the notebook. what i need is the flight data (position, altitude, speed, direction of the drone, movement direction, etc.) and a way to set the flight data and gimble movements

[2021-09-14 13:53:59] m4x : <https://github.com/m4xw/rosettadrone_mini2>

[2021-09-14 13:54:06] m4x : has ground station support

[2021-09-14 14:11:46] tmbinc : @sysdefwonder, the problem is routing - while most stuff can be sent from the bottom port ("ACM"), not all responses are routed to that port, and especially some reports aren't. The top port ("app") unfortunately requires negotiation before you can use it. The solution that @m4x presents uses an Android phone as a proxy, and you can use DJI's SDK. I would be very interested though in a PC-only all-opensource solution to fly a Mini2. I can probably hack the RC to solve the routing issue, or maybe there's a method to re-route the ports.

[2021-09-14 14:13:18] m4x : @tmbinc it does just that already

[2021-09-14 14:13:28] m4x : basically phone acts as a gw for the controller

[2021-09-14 14:13:36] m4x : already works passing it to pc

[2021-09-14 14:13:42] m4x : and controlling from it

[2021-09-14 14:14:39] m4x : Unless i guess u consider having a phone connected unwanted

[2021-09-14 14:14:48] m4x : i actually like it since then u dont need cables for the rc

[2021-09-14 14:14:53] m4x : and place it outside or smth

[2021-09-14 14:15:03] m4x : and have it connect back (or stream via umts)

[2021-09-14 15:59:22] sysdefwonder : From [https://developer.dji.com/onboard-sdk/documentation/guides/component-guide-flight-control.html](https://developer.dji.com/onboard-sdk/documentation/guides/component-guide-flight-control.html) it sounds like you can completely control the drone with the SDK functions. Why do you need the SDK instead of talking to the controller directly? Because DJI created some kind of lock, you need to login ...?

[2021-09-14 16:05:30] m4x : you dont need it

[2021-09-14 16:05:37] m4x : if u wanna spend months writing your own sdk

[2021-09-14 16:05:38] m4x : be my guest

[2021-09-14 16:06:17] m4x : my stuff works based on virt stick

[2021-09-14 16:06:27] m4x : so takes all data and tells the drone how to act

[2021-09-14 16:15:26] sysdefwonder : To me it sounds like: my program -> API implemented in QGroundControl -> android app -> flight controller. I'm wrong?

[2021-09-14 16:16:06] m4x : well yea if u wanna go that route

[2021-09-14 16:16:12] m4x : or just tell it from the app directly

[2021-09-14 16:16:37] m4x : i support wp lists as well as "click and fly"

[2021-09-14 16:16:39] m4x : from gc

[2021-09-14 16:16:55] m4x : i broke video feed to gc tho

[2021-09-14 16:16:58] m4x : need to fix that..

[2021-09-14 16:18:40] sysdefwonder : I'm thinking of possibilities with free programming as in ...

[2021-09-14 16:22:51] sysdefwonder : automatically creating 3D models from the area and plan perfect flights in the 3D room without the fear of running into obstacles

[2021-09-14 16:24:31] sysdefwonder : Just a future possible application of an open API

[2021-09-14 16:27:14] sysdefwonder : Creating a 3D plan from photos is even easier if you have all metadata (gps position, camera angles, etc.) in the video and photos

[2021-09-14 16:31:29] sysdefwonder : Some software even create 3D models without any photo meta data. So scanning the environment should be easy. And by using that plan the leak of obstacle sensors mini 2 is solved, too

[2021-09-14 16:31:59] sysdefwonder : That's my motivation of searching for an open API

[2021-09-14 16:33:52] sysdefwonder : Heh, openstreetmap would love a 3D mapping drone, too

[2021-09-14 16:36:53] m4x : > automatically creating 3D models from the area and plan perfect flights in the 3D room without the fear of running into obstacles (

[2021-09-14 16:36:56] m4x : i do just that

[2021-09-14 16:36:59] m4x : with metashape

[2021-09-14 16:37:09] m4x : i support direct output from its mission gen :wink:

[2021-09-14 16:49:02] sysdefwonder : The free (as in FLOSS) alternatives to metashape are not useful?

[2021-09-14 16:50:42] m4x : i think u can do all that in the demo even

[2021-09-14 17:02:46] sysdefwonder : export and save functions are blocked in the demo

[2021-09-18 18:29:22] flymymavic : Hey Guys and Girls, Drone-Hacks has given me some free keys to giveaway if you want to be in with a chance to win one just go to this video hit the sub button and leave a comment [7:29 PM] <https://www.youtube.com/watch?v=5zJsJa3ao18&t=309s>

[2021-09-20 15:47:43] azerbaijan : Beep, any chane modify parameters on mini 2?

[2021-09-20 21:09:05] elvin.yx : Just curious what's special with that battery? And when would it force the limp mode? Like when battery is < 10%?

[2021-09-20 21:52:37] lolo780 : Battery under 10%. No way to find out now, and none of the others have the issue. All I can recommend is test with every battery.

[2021-09-20 21:56:25] elvin.yx : I just got a new battery a few days ago and this does not happen for me. From the GO app it shows the battery was made in May this year.

[2021-09-20 22:37:04] elvin.yx : Man it is just a stupid design to force you staying in the air for longer when you're out of battery lol

[2021-09-20 23:06:28] lolo780 : For sure. It should descend at the L2 velocity.

[2021-09-21 20:22:13] horrible.programmer.e : @26519433644a there’s a few

[2021-09-21 20:24:05] horrible.programmer.e : @26519433644a boot into serial mode, there’s the dji-firmware-tools github repo it has all the scripts

[2021-09-21 20:24:41] horrible.programmer.e : @26519433644a u need serial btw, pip3 install serial or w/e

[2021-09-22 05:03:24] azerbaijan : @horrible.programmer.e thank you, i gonna try

[2021-09-22 05:28:32] bin4ry : also there is the [drone-hacks.com](http://drone-hacks.com) tool, this is the channel for this tool btw ;) parameter editing is free

[2021-09-22 13:34:03] azerbaijan : But any parameters i try edit with dh app, not working on mini 2, for example forced landing at critical battery level...

[2021-09-26 14:02:03] flymymavic : If anyone off this channel entered into the free key giveaway its been drawn [https://youtu.be/Trebk4njSk4](https://youtu.be/Trebk4njSk4)

[2021-10-01 01:31:41] critterrzz : Trying to buy another license but keep getting spinners on website :)

[2021-10-01 02:07:51] critterrzz : Issues on your website? Trying to buy another license.

[2021-10-01 04:56:59] bin4ry : website is up an fine

[2021-10-01 12:19:25] d95gas : @bin4ry IM'd you a file

[2021-10-01 12:22:43] bin4ry : hm? i didn't get a file

[2021-10-01 12:25:56] d95gas : Oh thats odd. Let me try again

[2021-10-07 12:47:16] flyhigh213 : Can adb root shell for Mavic 2 over .100 be possible dh feature to add with pro license?

[2021-10-07 16:18:26] bin4ry : hello, we always try to add what is possible :) but currently it is not possible to integrate that root for fw > 100, sorry

[2021-10-10 08:04:04] d95gas : @bin4ry Has there been any testing to see if the Certificate still works with DJI Fly v1.4.12?

[2021-10-10 08:21:43] bin4ry : @d95gas please take a look at the website, the info regarding the fly app is up there for a few days already (i tested it right on release day and updated the info on the homepage) :joy::wink:

[2021-10-10 08:24:42] d95gas : What a muppet I am :slightly_smiling_face: why did I not think of the obvious and check the bloody site in the first place....... I blame my age. Did you have a dig at that APK from Drone Tweaks? anything you didnt already know?. Thanks.

[2021-10-10 08:35:46] bin4ry : DT made a good approach hacking the apk, it's genuine and it is their own work as it seems to me. i don't like their time limited approach but it's their business ;) it is for sure genuine work and not stolen from anybody (atleast not that i know of!). **tap hat** to them for doing it this way :)

[2021-10-12 02:54:29] dronepilot : Question trying to downgrade air 2s firmware identical value but takes over 40 minutes to upload module. Is this normal? Ran out of battery at 98% didn't even start downgrading only uploading module.

[2021-10-12 03:23:40] bin4ry : not normal, sounds like an usb connection issue. try swapping usb cable and port

[2021-10-12 03:24:56] bin4ry : uploading should be fairly quick if not something is wrong. also make sure no other software is trying to access the serial port

[2021-10-12 15:16:56] bin4ry : set the channel topic: DroneHacks homepage: Up | Support: Up | Latest Desktop Version: 1.23 | Latest Android Version: 1.0.11

[2021-10-12 17:20:26] amurmurmur : Does downgrading a DJI FPV work or possible yet?

[2021-10-12 17:27:14] bin4ry : @amurmurmur Flashing FPV is not supported yet, but you can flash it (also downgrade) with DJI Assistant 2 for FPV.

[2021-10-12 17:27:45] amurmurmur : DJI allows you to donwgrade?

[2021-10-12 18:23:33] joonas : @bin4ry they stopped offering older version in the gui for at least the goggles. if you're on 0604 then it still allows you to reflash 0604, but if you're on 0606 you can only do 0606.

[2021-10-12 18:23:59] joonas : no anti-rollback, so a custom tool should work for any version afaik

[2021-10-12 18:24:05] joonas : this is goggles, not sure about wm170

[2021-10-13 04:05:19] bin4ry : that is normal for dji, the fpv can be flashed with 01.02.0000 from asssitant

[2021-10-13 05:11:31] bin4ry : @j00n45 can you get me a usb log of the flashing process of the v1? i might be able to add it to Drone-Hacks. In the past usblyzer logs worked fine enough for devices that i don't have :wink: i have someone in support also asking about it but he didn't deliver the log.

[2021-10-13 10:40:17] joonas : sure, i'll look a bit later, i have a bunch of vista logs saved already somewhere. i also got v2 goggles now btw, could do those too if you need it.

[2021-10-13 10:40:35] joonas : was going to eventually get around to writing a cli app

[2021-10-13 10:46:11] dronepilot : DH window app doesn't show license and doesn't give me firmware flashing or hacking just downloaded the newest version.

[2021-10-13 11:19:21] bin4ry : server was stuck in update, it is fixed now. sorry for the issue

[2021-10-13 11:19:30] bin4ry : set the channel topic: DroneHacks homepage: Up | Support: Up | Latest Desktop Version: 1.24 | Latest Android Version: 1.0.11

[2021-10-13 11:59:11] bin4ry : @j00n45 i will happily include the flashing feature into dronehacks. flashing is always and was always a free feature

[2021-10-13 11:59:18] bin4ry : i just need the logs from the devices i do not own

[2021-10-13 11:59:23] bin4ry : so i can see what is going on :smile:

[2021-10-13 13:01:20] originaldobo007 : We should know right after 11/5 if your cert works on the M3. My prediction is....yes.

[2021-10-13 14:03:09] joonas : @bin4ry can we get a light bulb screwing in mod please? <https://vm.tiktok.com/ZM8NnFJE5/>

[2021-10-13 14:27:58] bin4ry : :smile:

[2021-10-13 15:02:33] dronepilot : M210 v2 license unlock work with the RTK version?

[2021-10-13 16:26:07] bin4ry : @rgf8aerial it will work on both, rtk is added to m210v2 via module. so the basic drone is the same

[2021-10-13 17:49:41] dronepilot : Cheers :beers:

[2021-10-14 11:18:17] flyhigh213 : I have a m200v2, a wm420 I believe is the board. Will the 210v2 software you wrote work on it? And is this a mod or a cert?

[2021-10-14 12:03:13] bin4ry : please connect it to the software and send me a screenshot in PM. for the enterprise drones m210v2 and m300 the hack is certificate

[2021-10-14 21:14:59] originaldobo007 : **WARNING** New fw "update" for the Air2S to "optimize flight safety". Looks like they are trying to get rid of the cert.

[2021-10-15 08:19:44] bin4ry : thanks, added to the birdmap! check out the birdmap : <https://drone-hacks.com/birdmap> nothing to worry yet :slightly_smiling_face: old warning is still active

[2021-10-15 08:30:25] pingspike : excellent :+1::skin-tone-2:

[2021-10-15 13:57:04] flylusive_pat : <!here> <https://drone-hacks.com/battery-repairment-tool>

[2021-10-15 13:57:33] pingspike : dude... you woke me up

[2021-10-15 14:05:00] czipis : where to find the key? I requested it, it gave the key, then I went to homepage to get to the the page where to download the tool. But I forgot to save the key and now on the page <https://drone-hacks.com/battery-repairment-tool> I can see only `You already redeemed your free key`

[2021-10-15 14:07:40] flylusive_pat : Check your email buddy

[2021-10-15 14:07:48] flylusive_pat : Then one that was registered with DH

[2021-10-15 14:10:14] czipis : Thanks, I forgot to check email. Sadly it is windows executable. Not for me as linux user.

[2021-10-17 20:21:02] infinitydrones : Anyone test the new air 2 01.01.0670 firmware with dronehacks? I've not found the release notes yet.

[2021-10-17 20:22:48] pingspike : :exploding_head:

[2021-10-17 20:24:19] pingspike : @gerhardmail scroll up to Thursday for the answer to your question

[2021-10-17 20:24:33] pingspike : and the release notes are in the same place they always are, on the DJI Air 2 downloads page

[2021-10-17 20:24:34] infinitydrones : Ah sorry man. I'll scroll up now. Funny release notes I found was for 610 earlier...

[2021-10-17 20:24:48] pingspike : <https://www.dji.com/uk/mavic-air-2/downloads>

[2021-10-17 20:25:03] pingspike : <https://dl.djicdn.com/downloads/Mavic_Air_2/20211014/Mavic_Air_2_Release_Notes_en.pdf>

[2021-10-17 20:26:09] infinitydrones : Was just keen to know if it was worth testing to see if the license etc still works on the new firmware

[2021-10-17 20:27:02] pingspike : not that keen, it’s Sunday now man :blush:

[2021-10-17 20:27:17] infinitydrones : Haha

[2021-10-17 20:27:20] pingspike : but yes, it’s all good still, safe to update

[2021-10-17 20:27:56] infinitydrones : Yeah when dji releases an update with no info then it's pretty safe to say its not in the users best interest

[2021-10-17 20:28:41] infinitydrones : Did you confirm that the mod still works on the new firmware? Because the birdmap doesn't

[2021-10-17 23:43:31] dronepilot : It doesn't work just updated now : / Had to back up to .610 every flawlessly.

[2021-10-18 04:00:57] bin4ry : @rich @rgf8aerial @gerhardmail don't update it is the update that removes the certificate. just read the birdmap, it is listed there as incompatible since the firmware release: <https://drone-hacks.com/birdmap> nothing to worry in my old message means: nothing to worry you can still downgrade. but the permanent hacks are not going to work on this firmware, just if you accidently upgraded you can still go down again, so no worries yet. :wink: guys please just go on the birdmap and take a look :wink: if everybody would just check the birdmap there would be no confusion, birdmap shows that only fcc via android app is available but no other hack, it also recommends to downgrade to the recommended firmware and tells you that it is possble. once you click on the recommended you see that nfz and alt would be available there :wink:

[2021-10-18 09:45:29] william.markezana : what about the latest DJI GO 4 (4.3.46)?

[2021-10-18 10:15:28] bin4ry : @william.markezana just check the frontpage of the homepage......

[2021-10-18 10:17:03] william.markezana : amazing thank you, didn't realize this status was here

[2021-10-20 06:15:45] bin4ry : Warning, DJI seems to have released some firmware versions which have a higher antirollback value than others. Air2: 01.01.0610 (firmware good for hacking) - Antirollback 2 01.01.665 (firmware cannot be hacked, neither downgraded or upgraded) - Antirollback 3 01.01.670 (firmware cannot be hacked, but it can be flashed to 610) - Antirollback 2 Air2s: 02.04.2040 (firmware good for hacking) - Antirollback 1 02.04.2075 (firmware cannot be hacked, neither downgraded or upgraded) - Antirollback 2 02.04.2080 (firmware cannot be hacked, but it can be flashed to 2040) - Antirollback 1 FPV: 01.02.0000 (firmware good for hacking) - Antirollback 1 01.02.0015 (firmware cannot be hacked, neither downgraded or upgraded) - Antirollback 2 01.02.0020 (firmware cannot be hacked, but it can be flashed to 0000) - Antirollback 1 As far as i saw this firmware versions are not public available but some people have them (not sure how, my current assumption is that they were flashed after service, but this is only a guess). So please warn everyone now to install this firmware version, best would be not to update at all. Also this again shows that we should change our way of speaking about firmware versions, the version numbering is completely unimportant, the only important fact is the antirollback value. How does this value work? The drone has the antirollback value of the current firmware, this value can NEVER be decreased, it can only stay the same or increase! So when you want to flash a firmware the drone cannot flash it if the antirolback value of the firmware you want to flash is lower than the current value on the drone. the firmware you want to flash must have the same or a higher value. If you flash a firmware with a higher value the drone will automatically set itself to the higher value, from now on only versions with the same higher value can be flashed. Due to this the air2 cannot flash firmware 670 on top of firmware 665, because 670 firmware has a LOWER value than 665. i hope i was able to explain this now properly and i hope people will understand the importance of this value now. All drones with the firmwares 665, 2075 and 0015 cannot be hacked anymore and can not be flashed to a hackable firmware. IF or WHEN they will be able to be hacked again is unsure. Please spead this information in every channel and community you are part of! Warn everybody to NOT UPDATE! thank you for your attention!

[2021-10-20 09:59:36] m4x : surprised mini didnt see a update yet

[2021-10-20 13:30:12] fredmicrowave : Surprised there are still people updating their drones ...

[2021-10-20 21:02:10] pingspike : ikr? it's 2021 ffs

[2021-10-21 10:05:44] sanderjacob13 : Does anyone tried replacing mavic air 2s gimbal

[2021-10-21 10:07:48] bin4ry : @sanderjacob13 ~hardware channel maybe, this channel is only about [drone-hacks.com](http://drone-hacks.com) software :)

[2021-10-21 10:09:32] sanderjacob13 : Okay

[2021-10-22 04:15:07] lumbresjay : yes ireplaced air2s gimbal but gimbal calibration error 40011 occurs

[2021-10-22 04:27:37] bin4ry : @lumbresjay this channel is for [drone-hacks.com](http://drone-hacks.com) software. please use the correct channel .

[2021-10-22 13:11:17] austinc3030 : Would there ever be a possibility to disable remote ID in the drones? I’ve seen in the Fly app that it has a space where you can put a name and some other info to be broadcast but what if I didn’t want any information about my drone being broadcast. Hope that makes sense

[2021-10-22 13:27:58] m4x : well it literally has a switch there to turn it off

[2021-10-22 13:28:03] m4x : theres also a uuid only mode

[2021-10-22 13:28:08] m4x : just cant change them in air

[2021-10-22 13:28:18] m4x : if its really off tho, i never confirmed

[2021-10-22 13:36:09] jcase : uh

[2021-10-22 13:36:13] jcase : no its not off

[2021-10-22 13:36:26] jcase : i have an aeroscope, none of those privacy bits disable remote id

[2021-10-22 13:36:34] jcase : err drone ID

[2021-10-22 13:37:00] jcase : it can attempt to hide the serial, however there is a bug in it, and it will occasionally spit out the actual serial number in some models/firmwares

[2021-10-22 13:37:13] jcase : (maybe all models/firmwares, i didnt investigate)

[2021-10-22 13:37:41] jcase : on the p4 however, it does certainlyt sometimes spit out the serial instaled of the fakefake012345

[2021-10-22 13:40:41] kilrah : the switches are "some additional info you can give if you want" - turning them off doesn't disable the basic stuff that's always there

[2021-10-22 14:51:23] austinc3030 : That’s what I was assuming is that just cause it says it off doesn’t mean it’s actually off

[2021-10-22 14:52:08] austinc3030 : @jcase are you the same jcase that used to be active in android dev/cyanogenmod/lineage?

[2021-10-22 14:52:35] jcase : @austinc3030 yep

[2021-10-22 14:52:57] jcase : I wasn't in cm/lineage besides giving cm shit for their dumb security issues

[2021-10-22 14:53:01] dronepilot : Just purchased a license but doesn't show in the app something is going on. @bin4ry

[2021-10-22 14:54:30] jcase : I don't do much phone stuff anymore, mostly cUAS/UAS

[2021-10-22 14:55:15] jcase : Yep

[2021-10-22 14:55:29] austinc3030 : @jcase do you remember invisiblek, mastamoon, xavierdarkness. All those guys?

[2021-10-22 14:55:39] austinc3030 : We all still hang out but on discord now lol

[2021-10-22 14:55:48] austinc3030 : Ended up ditching irc.

[2021-10-22 14:56:21] jcase : @bin4ry was all in there too, he sat mostly on sony iirc

[2021-10-22 14:56:46] jcase : there many mobile ppl in and out of here, few professionals, few hobbyists

[2021-10-22 14:57:20] austinc3030 : Right before dronehacks supported NFZ removal for air 2 I started trying my hand at Trying to remove NFZ myself but by the time I started, they released their stuff. I might spin back up and look in to the remote I’d stuff

[2021-10-22 14:58:02] austinc3030 : Nice! hey come check out Discord with me [https://discord.gg/xSwaFUMN](https://discord.gg/xSwaFUMN) that’s the link to where we hang out now if interested lol

[2021-10-22 14:58:12] austinc3030 : Good to “see” you again though

[2021-10-22 14:58:26] jcase : im not keen on discord, have had them ban too many serves i was on for security/modding related stuff

[2021-10-22 14:58:35] jcase : not worth teh effort to find a new server each time that happens

[2021-10-22 14:59:13] m4x : @jcase thanks, thats all i needed to know :wink:

[2021-10-22 14:59:44] m4x : I kinda expected some shenanigans like this

[2021-10-22 14:59:47] austinc3030 : Ah I gotcha. The drone stuff is literally the only thing I do on slack

[2021-10-22 14:59:50] m4x : hence the caveat

[2021-10-22 15:03:16] m4x : @jcase do you know when exactly it becomes active?

[2021-10-22 15:03:36] jcase : what specifically

[2021-10-22 15:03:43] m4x : the id broadcast

[2021-10-22 15:03:54] m4x : does the fc need to be started up?

[2021-10-22 15:04:12] jcase : what drone

[2021-10-22 15:04:14] m4x : or shenans like power is enough

[2021-10-22 15:04:19] m4x : mini 2 in this case

[2021-10-22 15:04:26] jcase : once the FC is running

[2021-10-22 15:04:31] m4x : its what i have on ahnd and taken apart

[2021-10-22 15:04:39] m4x : FC is technically running on single press

[2021-10-22 15:04:45] m4x : without full powerup

[2021-10-22 15:05:00] m4x : i guess it doesnt send some data then

[2021-10-22 15:05:25] m4x : (means i.e as soon as fc has power it also broadcasts vs having power regulated from the FC or rtos)

[2021-10-22 15:05:35] m4x : the latter is easy patch

[2021-10-22 15:05:58] jcase : it really doesnt matter if it is sending droneid or not

[2021-10-22 15:06:01] jcase : its still trackable

[2021-10-22 15:06:10] jcase : i dont see why people care so much

[2021-10-22 15:06:16] m4x : sure you can always triangulate the rf signals

[2021-10-22 15:06:20] m4x : if u have 3 or more stations

[2021-10-22 15:06:23] jcase : nope

[2021-10-22 15:06:25] jcase : not needed

[2021-10-22 15:06:34] jcase : occusync has been broken by several companies

[2021-10-22 15:06:50] m4x : sure

[2021-10-22 15:07:00] m4x : i dont consider it secure to begin with

[2021-10-22 15:07:31] m4x : in our position we are able to just change stuff tho

[2021-10-22 15:07:52] jcase : i always get amused when people try or believe they have disabled droneID

[2021-10-22 15:08:15] m4x : It's not surprising tho

[2021-10-22 15:08:21] jcase : not at all

[2021-10-22 15:08:32] m4x : Actually I would've been more surprised if it didn't

[2021-10-22 15:08:36] m4x : Just had no proof

[2021-10-22 15:08:37] jcase : not surprising, it was the first thing i did

[2021-10-22 15:08:55] jcase : i failed on occusync attempt, but i had it killed in wifi mode

[2021-10-22 15:09:02] jcase : well first thing after findign a root vuln

[2021-10-22 15:09:27] m4x : Wide variety to chose from heh

[2021-10-22 15:09:43] m4x : Or just literally open the backdoor..

[2021-10-22 15:10:33] jcase : there were (are) tons on mavic 2

[2021-10-22 15:10:34] jcase : err

[2021-10-22 15:10:35] jcase : mavic 1

[2021-10-22 15:11:12] m4x : the real fun starts with persistance ^^

[2021-10-22 15:11:28] jcase : persistance is trivial on mavic 1, especially then but still trivial

[2021-10-22 15:11:28] m4x : surprised nobody did a cfw yet

[2021-10-22 15:11:33] jcase : cfw?

[2021-10-22 15:11:36] m4x : eventually on my todo

[2021-10-22 15:11:38] m4x : custom firmware

[2021-10-22 15:12:08] jcase : there have been some

[2021-10-22 15:12:18] m4x : i only saw patch based

[2021-10-22 15:12:25] m4x : no real replacement

[2021-10-22 15:12:36] jcase : well there have been parts fully replaced

[2021-10-22 15:12:43] jcase : i dont think you will see a full firmware replacement

[2021-10-22 15:12:55] m4x : yea will need to do that myself i guess

[2021-10-22 15:13:02] m4x : if my hw lasts long enough :stuck_out_tongue:

[2021-10-22 15:26:04] bin4ry : open a ticket and someone will fix it :) no worries

[2021-10-22 15:32:26] dronepilot : I did open still no answer.

[2021-10-22 15:35:13] bin4ry : well …. sometimes answering takes a little time. didn't support system tell you that answers sometimes take 12h-24h? if you bought today there is enough time to answer. i think it is normal that answering a ticket can take a little time because usually you are not sitting there waiting for a ticket to appear ;) we have times where the tickets get checked and worked on, please be a little patient, thanks :blush: please always use the ticket system, never notify me personal, you WILL get and answer and WILL get help! thanks :blush:

[2021-10-22 16:04:08] dronepilot : Thanks for the fast support everything perfect.

[2021-10-22 17:10:32] fredmicrowave : Knowing just you position intercepting occusync or triangulating is one thing, knowing your "personal" data and everything bound to the serial number, like email account etc, is another. I understand the later is only transmitter via DroneId ?

[2021-10-22 17:19:35] jcase : @fredmicrowave no, everything transmitted over droneid is also transmitted over occusync

[2021-10-22 17:19:47] jcase : i mean how do you think the app knows your serial or the drone knows the app's uuid?

[2021-10-22 17:21:35] m4x : by doing a handshake

[2021-10-22 17:21:53] m4x : over a unsafe layer :stuck_out_tongue:

[2021-10-22 17:22:25] m4x : tbh i wouldnt even mind a broadcast if drones actually have recievers for it

[2021-10-22 17:22:36] m4x : so they can properly coordinate each other

[2021-10-22 17:40:57] m4x : btw theres some save droneid to flash stuff

[2021-10-22 18:57:30] jcase : what

[2021-10-22 19:01:03] m4x : mini2 fc stuff

[2021-10-22 19:02:34] m4x : references to part of the same function that sets flyreason and some other things

[2021-10-22 19:03:13] m4x : so probably doable to set whatever / not fused but cant confirm rn

[2021-10-22 19:05:23] jcase : what

[2021-10-22 19:05:46] jcase : ah you mean some of the same data is written to flash? Absolutely it is. look in the dat logs

[2021-10-22 19:06:38] m4x : more like they share a storage device to pass the id to

[2021-10-22 19:07:39] jcase : dunno about that, but i do know it can be written to the dat logs

[2021-10-22 19:07:57] jcase : beyound gaining root ive not looked much into the mini2

[2021-10-22 19:10:09] m4x :

[2021-10-22 19:10:32] m4x : @tmbinc did you look into these before?

[2021-10-22 19:11:02] jcase : ya imn not looking at screenshots of ida psuedocode post work on a friday

[2021-10-22 19:11:03] jcase : lol

[2021-10-22 19:11:35] m4x : hah, fair

[2021-10-22 23:36:38] fredmicrowave : @jcase Right, I thought this info would transit via occusync at startup for handshake or after a manual query, but not be broadcasted constantly. The problem is that any guy with "credentials" can identify you at a distance and bring trouble, just because you broke some often idiotic limits.

[2021-10-22 23:37:35] jcase : Even law enforcement doesn't have those "credentials"

[2021-10-22 23:38:04] jcase : Don't believe the aeroscopes commercial, it doesn't expose your username or email

[2021-10-22 23:40:42] fredmicrowave : Good to know. Thanks. I suppose they could ask for those after the SN , but need a really good reaon.

[2021-10-22 23:42:55] fredmicrowave : Tbh I even though Aeroscope was or could be connected to some DJI database . would make sense, to be really useful...

[2021-10-23 11:10:51] jcase : The ads for it show it being connected but it isnt

[2021-10-23 16:06:48] w0h : I do not know how they hacked occusync but if they can read the transmitted messages I guess they can also just send a DUML message requesting the serial or other information. I do not know if there is a DUML message that contains the DJI account information but if yes they probably could just request that information too.

[2021-10-24 23:33:52] fredmicrowave : Aeroscope is not a hack, it´s made and sold by DJI, supposedly to credited entities like law enforcement, gov, airports....

[2021-10-25 11:41:42] azerbaijan : Can someone share list of dji blocking IPs to avoid leaks about flights?

[2021-10-25 15:59:41] jcase : its not even limited to "accredited" entities

[2021-10-25 16:00:01] jcase : but what he is referring to is other companies, who have a solution that does hack occusync

[2021-10-25 16:01:16] pingspike : I think this is on the !wiki

[2021-10-25 16:51:59] fredmicrowave : Ah ok, my bad.

[2021-10-26 06:55:47] azerbaijan : If dh uses serial number binding is dh software is it possible make further login using it, without entering log & pass,i.e. app retreieve serial number from drone look into database and if find it gave you opportunities according to license you own?

[2021-10-26 07:04:54] bin4ry : i don't understand

[2021-10-26 07:05:35] bin4ry : except for the mini1 you can apply the hacks to the drone itself, so after hacking you don't need to login again. or are you speaking about mini1 _

[2021-10-26 07:05:36] bin4ry : ?

[2021-10-28 15:23:54] eddy : eddy joined the channel.

[2021-10-28 18:11:25] pixel : pixel joined the channel.

[2021-10-29 00:29:55] stanlee : stanlee joined the channel.

[2021-10-29 09:18:53] fabyo : fabiotekno756 joined the channel.

[2021-10-29 17:47:48] quad808 : Super excellent video done by Infinity Drones: https://www.youtube.com/watch?v=5YCuj1eMd1w

[2021-10-29 18:36:46] gerhardmail : Thank you very much :slightly_smiling_face:

[2021-10-29 19:47:21] doctor : doctor joined the channel.

[2021-10-30 08:04:45] antoine : antoine joined the channel.

[2021-10-30 12:12:28] jj : madmaqx joined the channel.

[2021-10-30 22:28:30] gerhardmail : I'm wondering if the new Mavic 2 Enterprise Advanced will be supported by Drone Hacks - Any plans for it?

[2021-10-30 22:36:45] infinitydrones : I'm wondering if the new Mavic 2 Enterprise Advanced will be supported by Drone Hacks - Any plans for it?

[2021-10-31 00:11:13] will : will joined the channel.

[2021-10-31 01:15:49] cs2000 : Not speaking for @bin4ry but from previous experience, basic level support is relatively easy to add if someone with the particular model is willing to assist

[2021-10-31 01:15:49] cs2000 : @infinitydrones, Im not speaking for @bin4ry but from previous experience, basic level support is relatively easy to add if someone with the particular model is willing to assist

[2021-10-31 01:16:46] cs2000 : But wow, at £5,000+, theirs not gonna be a lot of those sold! Cant find a WM number for it even at the moment!

[2021-10-31 07:11:45] infinitydrones : Mmm, I have a few guys that are keen to help since they need the mods to do their work

[2021-10-31 07:12:01] infinitydrones : So If I can assist with getting support for it, I'll gladly do

[2021-10-31 17:20:16] pingspike : “new”? ?

[2021-10-31 21:10:37] lazypilot : lazypilot joined the channel.

[2021-11-01 14:58:55] abroo : abroo joined the channel.

[2021-11-01 18:43:14] ambushbug : ambushbug joined the channel.

[2021-11-02 07:41:53] fly2high213 : fly2high213 joined the channel.

[2021-11-02 07:49:38] fly2high213 : Was going to purchase regular/full license for my Mavic 2 enterprise dual and realized its no longer 49€ anymore since "Enterprise" is now its own key and now 300, ouch.

[2021-11-02 08:59:43] cs2000 : !wiki

[2021-11-02 08:59:58] cs2000 : dji-rev-bot added to the channel by cs2000.

[2021-11-02 09:06:33] polarfly : polarfly joined the channel.

[2021-11-02 12:16:18] masskrug : starka joined the channel.

[2021-11-02 13:09:34] leo : pilipala008 joined the channel.

[2021-11-02 13:32:05] infinitydrones : the regular license is all you need for your Mavic 2 Enterprise. The Enterprise license is something completely different and has nothing to do with the type of drone you have.

[2021-11-02 13:38:47] fly2high213 : Cool thank you, I will try again later today. when I clicked buy license and picked M2ED it said "enterprise license" and price 300, I didn't see an option for the regular license.

[2021-11-02 14:41:28] bin4ry : @infinitydrones that is not true. the enterprise license is for enterprise drones, the regular license is for regular drones. the regular license CANNOT be used for an enterprise one. as the birdmap shows. @fly2high213 is correct here. reason is simple, DJI charges for the enterprise name, buying this drones is much more expensive, even 2nd hand. so to get them supported is much more expensive as you first need to buy one (and in the end maybe nothing works so you just bought the drone for nothing). so enterprise for Enterprise drones (m2e, m2ed , m210 and soon m2ea) and regular for the regular enduser drones.

[2021-11-02 14:44:03] fly2high213 : Alright, thought I did need enterprise since its what popped up when I clicked my aircraft. Thanks for clearing that up

[2021-11-02 14:49:14] bin4ry : @fly2high213 yes you NEED the enterprise one. that is what I just said and explained

[2021-11-02 14:49:14] bin4ry : @fly2high213 yes you NEED the enterprise one. that is what I just try to say and explain

[2021-11-02 14:49:14] bin4ry : @fly2high213 yes you NEED the enterprise one. that is what I just said

[2021-11-02 16:57:45] infinitydrones : Apologies, I replied thinking about the old license system where there was a license that could give you more than just the regular license. It was called the professional license. Apologies once again for the miss information

[2021-11-02 16:58:25] infinitydrones : @bin4ry let me know if you need anything that could aid with getting the Enterprise Advanced supported in dronehacks.

[2021-11-03 06:06:31] fly2high213 : I understand that the rest of the enterprises 210v2 and 300, Mavic 2 advanced cost a lot more, like double a Mavic 2 dual, but the price for a my Mavic 2 enterprise dual, original not advanced, with beacon, light, and speaker) was only a few hundred extra compared to a Mavic 2 pro, If it was the "professional license" with Root / ADB I would maybe understand the 300 price tag. I'll have to hold off on this one.

[2021-11-03 09:05:05] bin4ry : the m2ed (new) costs 3.5k at the stores where i found it when i set the pricetag (up to 4.5k depending on the accessory pack) the m2 (new) cost (streetprice) 1k (sometimes 1.2k). so there is a price difference of 2.5k (leaving the acc. packages out of scope) between the 2 drone, thats prices from today. i wanted of course to make the prices easy navigateble, which means ent = ent , reg = reg . same "complaint" is btw. usually made for mini and m2 series. people complain that the mini lic. is the same price as the m2 lic. in the end i can start to create an individual price for every drone depending on the drone price, but then people will be confsed again. right now still people are not abl to navigate the birdmap to choose the correct drone, so ... not sure if it is a good idea to create individual prices. so what was done when the prices were adapted is that i took the smallest price and went to 1/10th of it. mini was around 400 euro then -> 40euro price. M2Enterprise 3k euro -> 1/10th ... you get the idea. Every other drone the license price will just get cheaper compared to the drone price. that was the calculation.

[2021-11-03 09:05:05] bin4ry : the m2ed costs 3.5k (up to 4.5k depending on the accessory pack) the m2 cost (streeprice) 1k (sometimes 1.2k). so there is a price difference of 2.5k (leaving the acc. packages out of scope) between the 2 drone, thats prices from today. but i will think about that problem. i wanted of course to make the prices easy navigateable, which means ent = ent , reg = reg . same "complaint" is btw. usually made for mini and m2 series. people complain that the mini lic. is the same price as the m2 lic. in the end i can start to create an individual price for every drone depending on the drone price, but then people will be confsed again. right now still people are not abl to navigate the birdmap to choose the correct drone, so ... not sure if it is a good idea to create individual prices. so what was done when the prices were adapted is that i took the smallest price and went to 1/10th of it. mini was around 400 euro then -> 40euro price. M2Enterprise 3k euro -> 1/10th ... you get the idea. Every other drone the license price will just get cheaper compared to the drone price. that was the calculation.

[2021-11-03 09:09:40] bin4ry : @fly2high213 ^

[2021-11-03 09:10:40] bin4ry : but this is not the place for price discussions, so i will clean this discussion later today to get the focus again on technical problems. DMs are always open to discuss other stuff :)

[2021-11-03 09:38:29] fly2high213 : I just bought one new last week, $1500 never activated. But ok

[2021-11-03 10:01:57] bin4ry : i don't say that i don't believe you, i just said that the day the licenses was created it was the price. you know in the beginning the mavic 2 price was 2k. now you get it at 1k. prices change. and i think i explained the price finding well enough. ebay price of the dual (used with acc.): https://www.ebay.de/itm/144272280370 supermarket price of one: https://www.kaufland.de/product/350199835/ cheaper one: https://www.fotokoch.de/DJI-Mavic-2-Enterprise-Zoom-Universal-Edition-mit-Smart-Fernsteuerung_86060.htm hardware prices are always dropping after a while. if you got one for 1.5 thats nice for you. i might even get a cheaper one if i import it from somehwere else. but for the prices where decided when the drone was around 3k, here it is still somewhat the price. maybe it dropped a little but not that far, 1.5k usd would be 1.2k euro, if i look at amazon.de the mavic 2 pro price (non enterprise) is still 1350euro and even higher than what you paid for the enterprise. so i can see your point, i hope you can see ours too. as said i do not want to discuss prices here, it is not the platform for that. you are welcome to have the discussion with support or via DM. i will definetly take a look and think about what you said and i will try to monitor the "small enterprise" prices. with the m3 coming up it might shake the market again too. we will see. thank you however for the input in a constructive way. glad to see that :)

[2021-11-03 10:53:43] kilrah : so you bought it from someone who took a loss and just got very lucky, doesn't represent the item's real value...

[2021-11-03 10:53:43] kilrah : so you bought it from someone who took a loss anf just got very lucky, doesn't represent the item's real value...

[2021-11-03 10:53:43] kilrah : so you bought it from someone who took a loss, doesn't represent the item's value...

[2021-11-03 10:53:43] kilrah : so you bought it from someone who took a loss anf just got very lucky, doesn't represent the item's value...

[2021-11-03 11:02:49] jcase : Can always just do the mods yourself if you dont like the pricing.

[2021-11-03 16:02:52] deesparkom2 : deesparkom2 joined the channel.

[2021-11-03 21:47:24] whydji : whydji joined the channel.

[2021-11-05 00:28:05] dave0x6d : dave0x6d joined the channel.

[2021-11-05 00:28:47] dave0x6d : Question: I installed DH with an iPhone 12 Mini. I've seen migrated and upgraded to an iPhone 13 Pro, but I want to switch to using Android since the livestreaming feature has a higher bitrate than iOS for some reason (plus I like the idea of using my iPhone for filming as the same time). What should I do to keep DH's certificate when switching devices?

[2021-11-05 08:28:11] seraph1573 : seraph1573 joined the channel.

[2021-11-05 09:09:52] kilrah : nothing, device isn't involved

[2021-11-05 10:10:15] yumu : yumu joined the channel.

[2021-11-05 14:13:42] dave0x6d : @kilrah oh, so the certificate is saved on the drone, not the app?

[2021-11-05 15:02:41] bin4ry : @dave0x6d yes correct!

[2021-11-05 15:32:39] dave0x6d : @bin4ry oh nice, so I can loan my drone to friends, and as long as they don’t update it, it’ll work fine?

[2021-11-05 15:35:41] bin4ry : yes!

[2021-11-05 15:36:42] dave0x6d : I plan on using the same DJI account, but curious, will the certificate still work if the DJI Fly app is used with a different account than what DH was initially installed with?

[2021-11-05 15:38:16] dave0x6d : Alright DJI, you do weird things. That seems quite odd, would have never guessed that’d work. :p

[2021-11-06 01:31:43] jackmax : jackson joined the channel.

[2021-11-06 08:39:21] matthijst : Safe to update to dji fly 1.5.0?

[2021-11-06 09:09:03] bin4ry : check the website

[2021-11-06 09:09:03] bin4ry : check the website frontpage , it has all information as soon as there is information available ;)

[2021-11-06 11:45:14] dronepilot : No issue at all v 1.5.0 iOS, android and smart controller.

[2021-11-06 11:51:07] dronepilot : No issue at all v1.5.0 iOS, android and smart controller.

[2021-11-06 12:38:43] matthijst : I did but figured someone here may have tested it already.

[2021-11-06 17:04:53] tsun : how likely is it that cert hack will work on M3?

[2021-11-06 17:11:16] bin4ry : i am no friend of speculations, there only will be info IF the drone is hacked, there will be no information for work in progress as it doesn't make any sense. if it's hacked it will be hacked if not then not. if somebody need or wants a hacked drone don't go for new models instead go for something that is hacked alreqdy ;) that's the only way, don't buy a drone hoping that it will be hacked "soon" it might as well never be hacked, nobody can seriously tell. so I will ONLY publish into and promises once something can be released / is released.

[2021-11-08 00:02:10] behram11 : I noticed that DJI FPV drone has a adb root option now, that's awesome! Would I be able to connect a different controller to the drone if I root it? Or could I add a different motor and have the drone recognize it?

[2021-11-08 01:24:18] dave0x6d : @bin4ry you might want to add to the FAQ about DJI account requirements, since it’s handy that the account doesn’t have to match.

[2021-11-08 15:12:33] j4ck : j4ck joined the channel.

[2021-11-09 00:24:17] mavic2pro666 : xiamen66 joined the channel.

[2021-11-09 10:29:37] markus83 : markus83 joined the channel.

[2021-11-09 11:02:02] max_ : max_ joined the channel.

[2021-11-10 12:54:41] bin4ry : https://drone-hacks.com M3 support for temp FCC (Android APK only)

[2021-11-11 19:43:19] markus83 : .com

[2021-11-12 22:50:24] yoawedojboompeaill : yoawedojboompeaill joined the channel.

[2021-11-13 16:30:15] flymymavic : Is this platform available on the web like slack was

[2021-11-13 16:36:39] flymymavic : Does this platfrom have a desktop app like slack did?

[2021-11-13 21:31:36] cs2000 : @flymymavic sure does mate https://mattermost.com/download/

[2021-11-13 21:32:33] flymymavic : Cheers bud

[2021-11-13 21:33:19] cs2000 : No worries, hope you and everyone else is settling in OK :)

[2021-11-13 23:04:51] stanlee : I think there might be a file size limit here that wasn’t on slack. If I try upload a 300mb video, it says “error” eventually.

[2021-11-13 23:04:56] stanlee : Weird.

[2021-11-14 03:39:18] czokie : @stanlee - There may not be a limit on slack, but there were total file size / space limits, that meant old stuff was no longer accessible. Now that its hosted on gear owned by one of our own crew, we need to be respectful of upload space. I dont know if he configured a specific limit, or if this is a default. But lets help him out by using megz.nz or similar if we need to upload big stuff.

[2021-11-14 10:49:21] cs2000 : @stanlee I have set the maximum file size to be 300mb, your video may just have touched the max limit. I can raise the limit to whatever is needed. The server currently is on a 120gb allocation so I need to be slightly mindful of space constraints. Options for the future are buying more storage from the server provider or adding an Amazon AWS storage bucket to hold uploads. Im not against doing either in time, obviously each has a cost and their own pro’s and con’s and we’re still learning what the groups requirements are for the platform itself. Will double check later on that an upload is possible at the limits of the filter and raise them if required :) it could be nginx having its on limits too which needs to be raised, I didn’t check that tbh

[2021-11-14 10:49:21] cs2000 : @stanlee I have set the maximum file size to be 300mb, your video may just have touched the max limit. I can raise the limit to whatever is needed. The server currently is on a 120gb allocation so I need to be slightly mindful of space constraints. Options for the future are buying more storage from the server provider or adding an Amazon AWS storage bucket to hold uploads. Im not against doing either in time, obviously each has a cost and their own pro’s and con’s and we’re still learning what the groups requirements are for the platform itself. Will double check later on that an upload is possible at the limits of the filter and raise them if required :)

[2021-11-14 13:24:16] stanlee : Thanks bro. I just didn’t know what the max was. I was going to upload some M3 clips.

[2021-11-14 15:06:11] fredmicrowave : The upload limits on Slack was ridiculously small, and we were constantly loosing access to stuff

[2021-11-14 18:29:10] dave0x6d : I'm curious, has anyone looked into changing bitrates on more recent DJI drones with the DH professional license?

[2021-11-14 18:31:04] dave0x6d : Not talking about trying to exceed the max rated bitrate, but rather always record at the highest bitrate possible for lower resolutions.

[2021-11-17 10:28:23] coldflake : coldflake joined the channel.

[2021-11-17 10:29:04] coldflake : @coldflake left the channel.

[2021-11-17 15:25:23] newlc : newlc joined the channel.

[2021-11-18 04:34:35] ili : ili joined the channel.

[2021-11-18 07:58:35] bin4ry : WARNING: DO NOT UPGRADE AIr2 FIRMWARE 01.01.0690 or AIR2S FIRMWARE 02.04.2110. NO HACKS ARE POSSIBLE AND DOWNGRADE WILL NOT BE POSSIBLE ANYMORE! Spread the word!

[2021-11-19 08:15:27] bin4ry : Little info from our website:

[2021-11-19 23:17:45] konraditurbe : konraditurbe joined the channel.

[2021-11-20 14:55:05] pingspike : you’re late ?

[2021-11-22 10:27:44] cooker : cooker joined the channel.

[2021-11-29 21:24:21] flymymavic : Mini has a new Firmware for quad and RC usual release notes say optimized flight safety which is code for Dh killer its 01.00.0600

[2021-11-30 09:21:24] cs2000 : Cheers @flymymavic, will get it added to DDD

[2021-11-30 09:26:53] cs2000 : ARB# is bumped to 2 as well, so no downgrade, stay away!

[2021-11-30 10:12:51] cooker : Used dronehacks to to downgrade my firmware on the Air2 to 01.01.610 from 01.01.670 - Do I need to redo the flash for every battery? Also is there a way to tell which batteries have been done and which one haven't?

[2021-11-30 10:12:51] cooker : Used dronehacks to to downgrade my firmware on the Air2 to 01.01.610 from 01.01.670 - Do I need to redo the flash for every battery? Also is there a way to tell which batteries have been done and which ones haven't?

[2021-11-30 20:18:49] quad808 : @infinitydrones just made an excellent video about what to do with a new drone that forces a firmware upgrade to locked firmware: https://www.youtube.com/watch?v=mXbKaEjYov0

[2021-11-30 22:15:13] infinitydrones : Thx @quad808 Hope it helps someone not lock out their bird

[2021-11-30 22:16:22] infinitydrones : I would flash with each battery, but It should not matter really. The big one is still that the drone's firmware is on the correct firmware.

[2021-12-01 00:00:43] quad808 : I believe, someone correct me if I am wrong, that if your batteries are on higher firmware than your drone, you don't need to flash them, since it won't do anything...they won't downgrade.

[2021-12-01 02:09:25] cooker : I've gotten no nags from the fly app, so I am just going to roll with it.

[2021-12-01 10:17:05] kimberlyisaflake : kimberlyisaflake joined the channel.

[2021-12-04 22:59:58] aol : aol joined the channel.

[2021-12-08 12:16:40] flymymavic : How does NFZ removal work for the P4P, do you hook it to DH app like the others

[2021-12-09 08:30:40] tissy : tissy joined the channel.

[2021-12-09 11:49:23] cooker : @flymymavic - https://drone-hacks.com/howto - for P4P look at "Custom Flycontroller"

[2021-12-09 15:56:24] flymymavic : Was looking for more info, such as how it gets applied to the drone, I don't have one, I'm being asked about it

[2021-12-09 23:20:44] quad808 : @flymymavic yes you need to connect up the drone and flash the custom flycontroller, which will give a perm unlock as long as you don't reflash the firmware to a new version. Its all done for you with a valid license. (been a while since I did it) Basically, register the drone to a license, then make sure you are on the correct firmware for custom flycontroller - DH will tell you, then hit apply and the magic happens.

[2021-12-10 08:22:22] il1oo0 : il1oo0 joined the channel.

[2021-12-10 10:15:04] flymymavic : So you plug it in to your computer? Great thanks mate

[2021-12-13 10:30:20] elintnl : When updating to new Dji fly app 1.5.4 , mini 2 gets new RC firmware

[2021-12-13 10:30:20] elintnl : When updating to new Dji fly app 1.5.4 , mini 2 gets new RC firmware, I read it on the DJI Forum

[2021-12-13 11:48:08] sparkyws : Anyone know what the Mini 2 controller firmware update is about dji rc-n1 firmware v04.11.0032 and if it will affect #Dronehacks

[2021-12-13 14:33:12] bin4ry : it will most likely not affect the hacks, but i recommend against it. i have only bad experience with updates in general and more specially in RC updates. also the new rc-n1 rc update i heard reports that the drone and RC randomly disconnect (but only got that info on some air2). so i advise as usualy against any update

[2021-12-13 14:33:12] bin4ry : it will most likely not affect the hacks, but i recommend against it. i have only bad experience with updates in general and more specially in RC updates. also the new rc-n1 rc update i heard reports that the drone and RC randomly disconnect (but only got that info on some air2). so i advise as usualy against any update if there is no realy reason to do it.

[2021-12-13 15:15:02] solution : solution joined the channel.

[2021-12-13 19:31:02] drj84 : drj84 joined the channel.

[2021-12-13 22:05:50] clanc : clanc joined the channel.

[2021-12-13 22:47:53] drlov : drlov joined the channel.

[2021-12-14 00:53:05] pangjammy : pangjammy joined the channel.

[2021-12-14 13:53:59] robertosmera : robertosmera joined the channel.

[2021-12-14 13:55:05] robertosmera : Good Morning, anyone knows how to get rid of forced RTH in altitude flights on a DJI Mini 2?

[2021-12-14 15:36:33] msp3241 : msp3241 joined the channel.

[2021-12-14 16:14:26] kostafun : kostafun joined the channel.

[2021-12-14 16:28:23] feckless : feckless joined the channel.

[2021-12-14 19:42:05] doolaly13 : doolaly13 joined the channel.

[2021-12-16 01:30:48] divergentex : divergentex joined the channel.

[2021-12-16 01:34:10] divergentex : i can you helpme to hack mi drone to nfz and fcc?

[2021-12-16 01:34:21] divergentex : what i need

[2021-12-16 01:34:34] divergentex : i have a mavic mini

[2021-12-16 01:35:36] divergentex : i hacked my mavic pro, but i dont anything about process and tool for mavic mini

[2021-12-16 01:35:41] divergentex : thanks

[2021-12-16 05:40:24] d95gas : Everything you need is on the Drone Hacks website: https://drone-hacks.com/

[2021-12-16 10:42:57] lawesslee : lawesslee joined the channel.

[2021-12-16 13:48:59] switchgott : switchgott joined the channel.

[2021-12-16 14:45:14] oto : oto joined the channel.

[2021-12-17 11:01:56] haidongqing : haidongqing joined the channel.

[2021-12-17 20:12:15] copyleft : copyleft joined the channel.

[2021-12-18 09:40:25] runni : runni joined the channel.

[2021-12-20 22:06:16] dereksynkopa : dereksynkopa joined the channel.

[2021-12-21 07:17:14] infinitydrones : have anyone seen a drone keep iets FCC Boost mod after a firmware update

[2021-12-21 07:32:30] infinitydrones : Strange... If I change the setting in dronehacks to "stock" it says fcc is removed. But when I check in the Go4 App (mavic 2 pro) FCC is still enabled. Then if I try to load the mod again then I get an error that the fcc hack has failed. Very strange

[2021-12-21 07:42:15] bin4ry : The removal only removes the hack files. Once you have removed it reboot the drone 1-2 times fully before doing any processes again, without this reboots you will get failures ;) Then when the hack on the drone is gone go outside and wait for full GPS on phone and drone, then restart the app. The app will now reset the drone to the default mode in your region. Only with working gps on phone and drone the region will reset again. Due to that it is very popular in russia (and maybe some other areas), to quickly cover the drone in aluminum foil/remove the usb cable to keep region settings after one time hacking.

[2021-12-21 07:42:15] bin4ry : The removal only removes the hack files. Once you have removed it reboot the drone 1-2 times fully before doing any processes again. Then when the hack on the drone is gone go outside and wait for full GPS on phone and drone, then restart the app. The app will now reset the drone to the default mode in your region. Only with working gps on phone and drone the region will reset again. Due to that it is very popular in russia (and maybe some other areas), to quickly cover the drone in aluminum foil/remove the usb cable to keep region settings after one time hacking.

[2021-12-21 07:42:15] bin4ry : The removal removes the hack files which are executed at boot time of the drone. Once you have removed it reboot the drone 1-2 times fully before doing any processes again, without this reboots you will get failures ;) Then when the hack on the drone is gone go outside and wait for full GPS on phone and drone, then restart the app. The app will now reset the drone to the default mode in your region. Only with working gps on phone and drone the region will reset again. Due to that it is very popular in russia (and maybe some other areas), to quickly cover the drone in aluminum foil/remove the usb cable to keep region settings after one time hacking.

[2021-12-21 08:49:41] infinitydrones : I see, but I think there is something fishy with this drone... When I turn the drone on, then the controller and then connect the device. The controller and drone binds fine, but the device does not connect tot he controller... only if I turn off the wifi of the device does the drone connect to the controller - like I said... very strange

[2021-12-21 18:39:51] dereksynkopa : I would like to be able to restart the engines during descent. Of course, you can turn off the engines during descent, but navigation error occurs during descent, preventing the engines from restarting. The problem concerns the mini 2. I was already falling from a height of 2100 m in the autorotation mode with a falling speed of 15-16 m/s, the drone hit the slushy ground and suffered no damage except for the damage to the propeller. What parameter may be responsible for the navigation error while the drone is moving?

[2021-12-21 18:39:51] dereksynkopa : I would like to be able to restart the engines during descent. Of course, you can turn off the engines during descent, but navigation error occurs during descent, preventing the engines from restarting. The problem concerns the mini 2. I was already falling from a height of 2100 m in the autorotation mode with a falling speed of 15-16 m / s, the drone hit the slushy ground and suffered no damage except for the damage to the propeller. What parameter may be responsible for the navigation error while the drone is moving?

[2021-12-21 20:06:02] eddy : Accelerometer - tilt of more than 45 degrees. I'm afraid that changing this parameter is not normally available.

[2021-12-21 20:20:48] dereksynkopa : I thought about it too, but I don't think that's it. I have an image recording and the drone did not tilt more than 45 degrees. It has to do with the movement of the drone. Make a simple test. While driving the car, try to start the engines on the drone. Unable to get a navigation error.

[2021-12-21 20:20:48] dereksynkopa : I thought about it too, but I don't think that's it. I have an image recording and the drone did not tilt more than 45 degrees. It has to do with the movement of the drone. Make a simple test. While driving the car, try to start the engines on the drone. A navigation error will occur.

[2021-12-26 16:36:23] djshadowxm81 : djshadowxm81 joined the channel.

[2021-12-29 15:13:43] speatuk : speatuk joined the channel.

[2021-12-29 19:05:12] mavic2reverser : mavic2reverser joined the channel.

[2021-12-31 23:09:45] knarfboy : knarfboy joined the channel.

[2022-01-04 05:01:00] capra_vecinului : capra_vecinului joined the channel.

[2022-01-05 22:35:44] chrboesch : chrboesch joined the channel.

[2022-01-08 21:58:13] lurker : lurker joined the channel.

[2022-01-09 00:03:39] droneuser : biosblob joined the channel.

[2022-01-09 10:11:02] priegor : priegor joined the channel.

[2022-01-09 11:35:34] ephleft : ephleft joined the channel.

[2022-01-09 15:06:52] rickysuper : rickysuper joined the channel.

[2022-01-09 16:17:37] yyds : yyds joined the channel.

[2022-01-09 18:16:12] airiver : airiver joined the channel.

[2022-01-09 18:40:36] powellste : powellste joined the channel.

[2022-01-10 14:29:57] cnt-rgo : cnt-rgo joined the channel.

[2022-01-12 02:44:42] chaton78 : chaton78 joined the channel.

[2022-01-13 15:09:12] idzik : idzik joined the channel.

[2022-01-14 11:25:45] dronepilot : Does DH app connect with mavic 3 parameter edit?

[2022-01-14 14:05:40] bin4ry : not yet, only in non public beta versions. I have added the function to speak to the mavic 3 to "dji-firmware-tools", so you can edit the parameters with them for now

[2022-01-15 01:05:10] dronepilot : Ahh nice. Will it be available next dh app update to edit m3 parameters?

[2022-01-15 02:58:30] bin4ry : it will be available at some point, when everything is nice and stable

[2022-01-15 19:06:59] dronepilot : Nice, cheer’s mate.

[2022-01-16 07:18:28] dronee : dronee joined the channel.

[2022-01-18 02:21:44] emisune : emisune joined the channel.

[2022-01-18 20:16:55] jcase : Does DH support the HTC Evo yet?

[2022-01-18 20:17:14] jcase : those sunshine bastards wont add support

[2022-01-19 08:32:22] vagr4nt : vagr4nt joined the channel.

[2022-01-19 09:14:56] bin4ry : sneaky bastards

[2022-01-19 09:22:15] elintnl : FYI new firmware released by DJI for Air 2 and Air 2S

[2022-01-19 11:42:32] pingspike : ??‍♂️

[2022-01-22 19:11:04] theyepperson : theyepperson joined the channel.

[2022-01-24 16:06:21] hiker234 : hiker234 joined the channel.

[2022-01-26 17:45:12] speatuk : Does the latest DJI app update still work with drone hacks? The 24/01/2022 release. Many thanks.

[2022-01-26 17:47:57] cds : cds joined the channel.

[2022-01-27 23:49:41] friedas : friedas joined the channel.

[2022-01-29 16:00:31] gargdavy : gargdavy joined the channel.

[2022-01-29 16:22:09] loveyou : loveyou joined the channel.

[2022-01-30 05:25:40] disturbed : disturbed joined the channel.

[2022-01-30 13:41:06] oakley75 : @speatuk Not bold enough to take the risk. I'd suggest sticking with 1.54

[2022-01-30 13:44:01] speatuk : @reoak I also have drone tweaks. (Sorry to actually say that here ?) the 1.5.9 dl works perfectly with Drone Hacks. The certificate is there and and fcc is always on.

[2022-01-30 13:45:09] oakley75 : Amazing to know thanks Did 1.59 add anything real?

[2022-01-30 13:45:09] oakley75 : Amazing to know thanks

[2022-01-30 14:08:58] kilrah : likely support for M3 features that got added in its firmware update

[2022-01-30 14:49:45] speatuk : @reoak it only added for the Mavic 3 as far as I am aware.

[2022-01-30 17:31:20] oakley75 : thanks for the data friend

[2022-01-31 02:21:34] shaq48mj : shaq48mj joined the channel.

[2022-01-31 02:21:51] shaq48mj : hi

[2022-01-31 02:22:41] shaq48mj : hi

[2022-01-31 02:22:55] shaq48mj : i new with drone

[2022-01-31 02:23:07] shaq48mj : i just buy a dji air2s

[2022-01-31 02:23:32] shaq48mj : i need help to disable nfz and the altitud

[2022-01-31 05:03:58] jackmax : jackson joined the channel.

[2022-01-31 07:38:42] infinitydrones : Please do not update the firmware when it prompts you to update

[2022-01-31 15:41:21] shaq48mj : 2.04.2130

[2022-01-31 15:41:38] shaq48mj : That the firmware of the aircraft

[2022-01-31 15:44:18] infinitydrones : Sorry man... its too late now. You cannot downgrade anymore...

[2022-01-31 19:09:18] icologne : icologne joined the channel.

[2022-01-31 21:02:56] shaq48mj :

[2022-01-31 21:03:07] shaq48mj : ???

[2022-01-31 21:03:16] shaq48mj :

[2022-01-31 21:03:23] shaq48mj : This could work ?

[2022-02-01 07:34:50] speatuk : @shaq48mj serial number of drone visible. ?

[2022-02-01 10:05:14] applemac : applemac joined the channel.

[2022-02-01 13:17:02] shaq48mj : ???‍♂️

[2022-02-01 17:34:48] bhammy187 : bhammy187 joined the channel.

[2022-02-02 20:41:24] dereksynkopa : I am trying to take off the M2 drone from the boat while it is swimming. Fix gps is, but at around 5m/s I get system navigation error without given specific number. This means that the drone cannot be taken off. If the speed drops below 5 m/s, the error automatically disappears and the aircraft can take off. Can it be increased by modifying a specific parameter? Thanks for the help.

[2022-02-05 07:24:52] nickmaza : Hi, I'm trying hack my friends drone, but I'm unable to sign in using his account.

[2022-02-05 07:25:29] nickmaza : is the app working?

[2022-02-05 08:06:07] nickmaza : Issue is solved now

[2022-02-05 08:06:35] nickmaza : it happened because of my firewall

[2022-02-06 05:09:16] frk : frk joined the channel.

[2022-02-08 10:03:26] sparkyws : Hey, is there any reason why the mini 2 is hit or miss when connecting with DH desktop app/ubuntu. It can take for ever to get it to connect or it can go in first time but them wont reconnect :man-shrugging:

[2022-02-08 17:35:05] quad808 : yes, its a timing issue. If you don't time the connection properly, no connection. *to connect to PC, as soon as you hear start up chimes, plug in USB to drone* The port is only open for a short amount of time.

[2022-02-09 12:12:09] cloudwerx : Hey guys, so I have a Mavic 1 that has a custom modded FC/FW as well as a Mavic 2 Pro that I just recently got a DJ license for and installed boost and the cert. hack. I run Android and was wondering if there is a specific version of Dji GO I should avoid using with the cert hack? I do have some custom nosec versions I am created using the tools available, but figure there are a lot of new features on out by now on the newer apps, just don't want to loose my cert hack or have any forced flashing going on, I do typically disable data when I fly modded

[2022-02-09 12:12:23] cloudwerx : DH*

[2022-02-09 16:01:34] shaq48mj : 4k feet ?

[2022-02-09 19:08:14] quad808 : @cloudwerx always go here: https://drone-hacks.com/#news this will show you what is the recommended versions to be using with Drone-Hacks. The only forced firmware that was done was on the Spark for the battery "issue" way back when...to my knowledge DJI has not done any forced updating since then, in their apps you can turn off automatic updates and or automatic downloading. It is always recommended to use a dedicated device...phone/tablet etc so that YOU can control what data and or updates are done to your drone. When in doubt, cache your maps before flying...(if you need them) and turn off all data on your device. Always, ALWAYS check with DH before doing ANY firmware updates....DJI likes to disable any and all modding capabilities to remain in control of your drones.

[2022-02-10 11:39:33] loveyou : Hi. DJI Air 2S Firmware: v02.04.21.30 please update Birdmap. Thank.

[2022-02-10 11:49:50] bin4ry : 2130 only dhcompanion

[2022-02-10 11:50:13] bin4ry : you can use whatever app you want currently;)

[2022-02-11 13:03:19] socializednerd : socializednerd joined the channel.

[2022-02-12 20:30:27] dereksynkopa : Does the mini 2 have an OPTI mode? What digit do you need to put in the parameter, e.g. 680, to start this mode? Thanks for the help.

[2022-02-13 09:27:47] dereksynkopa : Since a lot of answers to my question appeared, I will try to organize the discussion. ;) Well, setting the number 3 in parameter 680 is actually ATTI mode with the lower VPS turned on for mini 2. I don't know about other sensors for other drones. In addition, in this setting, RTH also works in all cases (manual RTH activation, loss of signal, I have not checked yet whether it is also at low battery level). So, is it not the FARM mode?

[2022-02-13 09:27:47] dereksynkopa : As there were many answers to my question, I will try to organize a discussion. ;) Well, setting the number 3 in parameter 680 is actually ATTI mode with VPS disabled but IR sensors for ground detection are enabled. In addition, in this setting, RTH also works in all cases (manual RTH activation, signal loss, low battery - also).

[2022-02-13 09:27:47] dereksynkopa : As there were many answers to my question, I will try to organize a discussion. : wink: Well, setting the number 3 in parameter 680 is actually ATTI mode with VPS disabled but IR sensors for ground detection are enabled. In addition, in this setting, RTH also works in all cases (manual RTH activation, signal loss, low battery - also).

[2022-02-13 16:08:38] tmbinc : "parameter 680" is pm_mr_sa_mission_cfg_t fswitch_selection?

[2022-02-13 16:09:04] tmbinc : 3 is sport mode then, right?

[2022-02-13 16:13:18] tmbinc : ah no, 3 should be "normal"

[2022-02-13 16:13:40] tmbinc : there's "default", "gentle", "normal", "sport" as far as parameter sets go

[2022-02-13 16:14:38] tmbinc : apart from some overrides ("novice_func_enabled" or "app_enter_sports"), the function switch on the RC selects between the programmed modes in fswitch_selection[0..2]

[2022-02-13 16:17:08] tmbinc : any mission outside of "manual", "atti", "hover", "idle" however (i.e. things like "takeoff", "landing", "gohome", "navi" (=linux app controlled, i.e. quickshots etc.)) just ignore the parameters and typically just use the default parameters, plus some fixups ("GOHOME" for example uses "sport" mode tilt_atti_range)

[2022-02-13 16:17:34] tmbinc : NAVI missions, if i understand correctly, always use sport parameter set

[2022-02-13 16:18:51] tmbinc : Disabling VPS is, I think, not something I have actively looked into or found the FC code to deal with it

[2022-02-13 17:41:00] dereksynkopa : If you save all parameters to the file then you should have param_index 680 (fswitch_selection | g_config.control.control_mode) for switch 0 (where Cine is) By default there is 12, which is Cine mode. If you change to 3, it will be ATTI mode with RTH active and ToF without VPS. I am currently looking for a way to turn off the navigation error, which appears automatically before the drone takes off, if it is moving, for example, on a ship at a speed greater than 5m/s.

[2022-02-13 20:30:16] dereksynkopa : What's the name of the parameter or index for altitude stabilization?

[2022-02-14 06:35:09] tmbinc : Do you know how this error is reported? I assume via osd_general_data's imu_init_fail_reason?

[2022-02-14 06:37:30] tmbinc : (you could extract that from either recorded flight data,

[2022-02-14 06:37:49] tmbinc : or by reversing what the App displays)

[2022-02-14 06:42:51] tmbinc : Oh I think imu_init_fail_reason is unused, could be one of the start_motor_checks ("motor_start_error_code")

[2022-02-14 06:43:53] tmbinc : (there are things like imu_atti limit there, and the thing that prevents starting when USB is connected)

[2022-02-14 19:52:33] jakubowski : jakubowski joined the channel.

[2022-02-14 20:02:23] dereksynkopa : Anyone can do a simple test to find out about this error. You need to turn on the drone and place it on the passenger seat of the car. Place the pilot next to it and wait for the plane to catch the GPS fix. Then you have to move the car and at a speed of about 20 km / h, observe the navigation error on the smartphone display. If you want to try to take off the drone at this point, it will not be possible. Entering this error will not give you extra hard-coded information. Slowing down below 20 km / h automatically deactivates the fault and it is possible to start the engines. I do not have any additional information, except that the error also appears in the ATTI mode. Tomorrow I will check if it is also in MANUAL mode.

[2022-02-14 21:03:50] tmbinc : can you extract a logfile?

[2022-02-14 21:04:10] tmbinc : (using ftp ideally, I haven't reversed the dji assistant additional encryption)

[2022-02-15 20:07:14] dereksynkopa : Do you mean flyghtrecord? You will not find anything there, because the flight will not occur with a navigation error. Today I also found out that manual flyght mode (mode 0) does not work on mini 2. So I can't check anything. Apparently, the reason lies in the DH certificate.

[2022-02-15 21:25:04] tmbinc : Flight record will be produced even if you don't start the motor

[2022-02-15 21:25:32] tmbinc : It will contain the OSD info frames that have all the data that the app uses for the information display, including what's used to produce the error messages

[2022-02-15 21:25:53] tmbinc : (I've went through the whole chain once to figure out what exactly prevents a mini2 from starting when USB is connected...)

[2022-02-15 21:26:36] tmbinc : "flight record" == "blackbox" data, right? i.e. what you can download via ftp?

[2022-02-15 21:51:42] dereksynkopa : You probably mean files with the .dat extension? Let's go back to that tomorrow.

[2022-02-15 22:15:16] dsisti : dsisti joined the channel.

[2022-02-15 22:16:08] dsisti : hi I would like to know, how can i slowly my mavic 2 zoom controls, i mean, slow speed when go up, down, rotation and go left and right. i did it in app already, but still is not enough. if i change parameter rc_throttle_sensivity it can be the right one? Thank you.

[2022-02-15 22:16:40] dsisti : Mavic 2 zoom

[2022-02-16 03:34:19] fredmicrowave : Did you go to "advanced " in the app ? There you can can adjust gains and stick curves . You should be able to lower them close to zero response.

[2022-02-16 08:55:03] dsisti : yes i did it, but i need lower more.

[2022-02-16 22:39:32] fredmicrowave : I'm sorry but I really don't understand how you could want to lower something that already can be adjusted to almost zero... Lower the expo like this pages shows, and you should get an infinitely slow response in any axis... https://www.dronegenuity.com/dji-go-4-sensitivity-settings/

[2022-02-17 07:44:28] elintnl : Date: 2022.02.17 Aircraft Firmware: v01.01.07.20

[2022-02-17 07:44:45] elintnl : For Air2

[2022-02-17 10:25:40] pixel : Hi, any suggestions to what app to use on Android. I still got a patched go4 .. any new mods available?

[2022-02-17 14:22:49] lordhelmchen666 : lordhelmchen666 joined the channel.

[2022-02-21 00:54:30] shaq48mj : Anyway to do anlive strem with the smart controller

[2022-02-21 00:54:36] shaq48mj : Facebook

[2022-02-21 01:42:52] simon : simon joined the channel.

[2022-02-27 15:04:15] dimitrios : dimitrios joined the channel.

[2022-03-02 04:51:30] applemac : I have an air 2s with firmware 02.04.1691 , is it compatible with dronehacks?

[2022-03-02 04:51:30] applemac : I have a air 2s with firmware 02.04.1691 , is it compatible with dronehacks?

[2022-03-02 05:47:12] bin4ry : you can just flash the 2040 firmware which is compatible. flashing doesn't need any payment, because parameter modding and flashing are free to use basic features! :)

[2022-03-02 14:36:04] applemac : thanks, I will give it a try :)

[2022-03-03 03:00:01] applemac : so I updated to 2040, but during the process it got stuck @ 98%... I waited some time and restarted the drone. Now the drone cannot be detected by DH or the DJI software. (It does show the SD cards & flash though) I have rebooted my PC and tried multiple usb ports. The drone appears to work normally and the dji go app reports the firmware as 2040, just unable to detect on PC using DH & Dji Software. Any ideas?

[2022-03-03 03:00:01] applemac : I updated to 2040, but during the process it got stuck @ 98%... I waited some time and restarted the drone. Now the drone cannot be detected by DH or the DJI software. (It does show the SD cards & flash though) I have rebooted my PC and tried multiple usb ports. The drone appears to work normally and the dji go app reports the firmware as 2040, just unable to detect on PC using DH & Dji Software. Any ideas?

[2022-03-03 03:00:01] applemac : so I updated to 2040, but during the process it got stuck @ 98%... I waited some time and restarted the drone. Now the drone cannot be detected by DH or the DJI software. I have rebooted my PC and tried multiple usb ports. The drone appears to work normally and the dji go app reports the firmware as 2040. Any ideas?

[2022-03-03 03:00:01] applemac : so I updated to 2040, but during the process it got stuck @ 98%... I waited some time and restarted the drone. Now the drone cannot be detected by DH or the DJI software. I have rebooted my PC and tried multiple usb ports. The drone appears to work normally and the dji go app reports the firmware as 2040, just unable to detect on PC. Any ideas?

[2022-03-03 04:53:48] applemac : I updated to 2040, but the firmware update got stuck at 98%, i restarted the drone and it shows in the app its 2040 but it can no longer be detected in the DH app or assistant app. I got it to detect it once, and tried to flash again, same result. now its unable to detect it again. if I can figure out how to get it detected again I will try flashing on linux next time

[2022-03-03 04:53:48] applemac : I updated to 2040, but the firmware update got stuck at 98%, i restarted the drone and it shows in the app its 2040 but it can no longer be detected on PC with the DH app or assistant app. I got it to detect it once, and tried to flash again, same result. now its unable to detect it again. The drone still works fine but the battery leds blink as if its stuck in some kind of upgrade mode. if I can figure out how to get it detected again I will try flashing on linux next time. any suggestions appreciated.

[2022-03-03 05:01:05] bin4ry : restart your computer, sometimes the windows Usb port gets stuck

[2022-03-03 05:03:06] bin4ry : also try to connect it from the controller/app and see what is going on. (if it is still in the Update). the update itself runs on the drone not on the PC, the PC is merely a initiator and after that a spectator. the files are send to the drone, there is a checksum and Signature check of the files and only after that ia valid the flashing starts. and for the flashing process the PC is not needed anymore. so windows or Linux doesn't change a thing ;)

[2022-03-03 05:04:44] bin4ry : so try a PC reboot/connecting from the remote controller. my guess is that the USB serial has died and a windows restart will help. a failed flashing is extremely unlikely (except when you killed the drone yourself by forced reboot during the flashing or if the battery died in the middle)

[2022-03-03 05:07:59] applemac : The drone appears to be working fine, other than the issue above. It connects to the controller fine and the app reports the firmware as 2040. About how long does the average flash time take?

[2022-03-03 05:07:59] applemac : The drone appears to be working fine other than the issue described above. It connects to the controller fine and the app reports the firmware as 2040. About how long does the average flash time take?

[2022-03-03 05:08:37] applemac : I was worried windows 7 was the problem of why it got hung up

[2022-03-03 05:10:20] bin4ry : well windows 7 is not recommended and a this stage completely untested.

[2022-03-03 05:10:32] bin4ry : hacking might not work at win 7

[2022-03-03 05:10:33] applemac : ok update: I rebooted and now DH is connected to it

[2022-03-03 05:10:42] applemac : should I try my ubuntu laptop?

[2022-03-03 05:10:45] bin4ry : yah ;) like I said USB port got stuck

[2022-03-03 05:11:00] bin4ry : go and try win 7 worth that can happen is that it doesn't work

[2022-03-03 05:11:09] bin4ry : but make sure to install all drivers

[2022-03-03 05:11:20] applemac : is there linux drivers as well?

[2022-03-03 05:11:27] bin4ry : to do so install "DJI assistant 2 for consumer drones"

[2022-03-03 05:11:55] applemac : ok, and since Its reporting 2040 in the app, should I still flash 2040 again? just to be safe?

[2022-03-03 05:12:19] bin4ry : on Linux you need to make sure to have your user correctly setup. ubutuntu regularly screws Up usergroups for the serial port, and you have to create the udev rules for adb

[2022-03-03 05:12:38] bin4ry : no if it has 2040 no need to flash again. would make no sense to reflash

[2022-03-03 05:12:58] applemac : so you think the update was actually a success the the pc app just froze?

[2022-03-03 05:12:58] applemac : so you think the update was actually a success the the pc add just froze?

[2022-03-03 05:12:58] applemac : so you think the update was actually a success the the pc appjust froze?

[2022-03-03 05:13:57] bin4ry : yes, if it shows 2040 it was successful

[2022-03-03 05:14:07] applemac : great, thank you for all the help

[2022-03-03 05:14:19] bin4ry : you are welcome

[2022-03-03 10:31:49] cs2000 : Has always been a problem flashing DJI stuff. As the fw file is pushed to the drone, the drone itself does all the flashing. Apps like DH and even DJI assistant simply listen to the drones messages and report the status/progress on screen. Often the port closes or the message is missed that says "im done flashing" and so the app just sits there. :)

[2022-03-03 10:31:59] cs2000 : but if the drones version is reporting correctly, all is good

[2022-03-03 15:08:33] gh : ghartabc joined the channel.

[2022-03-05 02:02:28] tim : tim joined the channel.

[2022-03-07 13:10:14] bin4ry : https://drone-hacks.com/blog/post/705

[2022-03-07 14:05:32] cs2000 : Good work mate ?

[2022-03-07 17:49:22] quad808 : What kind of sorcery is this? :scream: :heart_eyes:

[2022-03-07 19:19:26] dronepilot : Trying to connect Mavic 3 and pop a error. Yes I’m on 1.25 and yes i have dji assistant consumer installed and open first and connected. Version 1.24 works perfect with others drones.

[2022-03-08 04:53:20] bin4ry : and what is the error?

[2022-03-08 15:46:51] dronepilot : Windows error, when the pop up doesn’t open can’t upload firmware and parameter tab start opening suddenly show the error. Did uninstall and got a new on today still the same error for me.

[2022-03-08 15:53:07] oakley75 : jaw on the floor... wow!!! you both are amazing for that long-coveted rollback feature and so much appreciated for real :100:

[2022-03-09 06:55:07] bin4ry : @dronepilot maybe a screenshot would help, i am not sure i understand what you mean with popup doesn't open. !? and which error it is showing? the error must contain some message or errorcode? please explain or show it as specific as you can. did you try another pc yet?

[2022-03-09 23:20:44] applemac : I purchased a license and I am trying to do NFZ removal (air 2s) but it just hangs on "hacking unlock certificate"

[2022-03-09 23:20:44] applemac : on average, how long does the DH program take to complete the "hacking unlock certificate" when doing NFZ removal (air 2s) ?

[2022-03-09 23:20:44] applemac : Im tying to unlock NFZ removal (air 2s) but it just hangs on "hacking unlock certificate" (windows 7 & ubutntu 20

[2022-03-09 23:20:44] applemac : Im tying to unlock NFZ removal (air 2s) but it just hangs on "hacking unlock certificate"

[2022-03-09 23:21:15] applemac : exhausted the battery to 50% waiting for the "hacking unlock certificate" to finish so far

[2022-03-09 23:21:15] applemac : exhausted the battery to 50% waiting for the "hacking unlock certificate" to finish so far, tried using ubuntu 20 and windows 7

[2022-03-09 23:21:15] applemac : exhausted the battery to 50% waiting for the "hacking unlock certificate" to finish so far, using ubuntu 20 ( windows 7 just hangs as well) will try to find a windows 10 pc to give it a go

[2022-03-09 23:38:15] applemac : it appears I may have some issue, ill have to investigate further

[2022-03-09 23:44:28] cantrepeat : got a mini 2 with the 10.03.000 fw on it serial starts with a 3 - what's available for this drone from drone hacks?

[2022-03-09 23:55:55] cantrepeat : I guess that's 01.03.0000 and not 10.0 lol

[2022-03-09 23:56:38] applemac : maybe it has something to do with "Error: No module named 'packaging" although I have already installed packaging via pip

[2022-03-10 00:06:06] applemac : might have something to do with the exception that shows in the command prompt

[2022-03-10 00:06:06] applemac : also an exception that shows in the command prompt " Exception in thread Thread-12" TypeError 'Nonetype' object is not callable... etc

[2022-03-10 00:38:06] applemac : or possibly related to this: exception in thread Thread-15: Traceback (most recent call last): File "threading.py", line 932, in _bootstrap_inner File "threading.py", line 870, in run File "controller/view_controller.py", line 1279, in view_controller.ViewController.install_cert TypeError: 'NoneType' object is not callable

[2022-03-10 01:44:08] quad808 : @cantrepeat bro...check the birdmap at dronehacks, tells you all you need to know

[2022-03-10 04:15:37] applemac : update: I tried a windows 10 PC and everything worked flawlessly :)

[2022-03-10 08:05:58] cantrepeat : @quad808 does my laziness show through? :D

[2022-03-10 14:00:58] cantrepeat : I'm doing this for a friend's drone, I would assume if he has already activated it with DJI there isn't much reason to delete it from DJI and reactivate it through DH?

[2022-03-10 14:11:03] infinitydrones : there is no reason to worry about activation :)

[2022-03-10 14:11:57] infinitydrones : if you want to unlock your drone using the dronehacks application and license then you can purchase a license key and perform the mod on the drone to remove the limits

[2022-03-10 14:17:13] danny73 : danny73 joined the channel.

[2022-03-10 14:34:00] cantrepeat : yeah, I bought a pro license and removed the limits this morning

[2022-03-10 16:00:28] cantrepeat : will the current 4.122 no sec apk work with the mini 2 and DH? I assume so.

[2022-03-10 16:00:47] bin4ry : mini2 needs dji fly not dji go

[2022-03-10 16:01:13] bin4ry : there is no "no sec neo" for dji fly unfortunatly

[2022-03-10 16:01:31] cantrepeat : ah, too bad, thanks bin4ry

[2022-03-10 16:01:50] bin4ry : you are welcome

[2022-03-10 16:02:08] cantrepeat : got the other stuff working on it with DH, should keep my friend happy for awhile.

[2022-03-10 16:06:02] bin4ry : :)

[2022-03-10 16:06:05] bin4ry : glad to hear that

[2022-03-10 16:30:46] tonyphx : tonyphx joined the channel.

[2022-03-10 17:47:52] flyingkite : The current version of the app 1.25, when connecting my mavic 2 pro, the choose firmware button is greyed out and not able to flash firmware. Everything else seem fine. Tried different usb cables and a different computer and still the button is greyed out.

[2022-03-10 17:47:52] flyingkite : The current version of the app 1.25, when connecting my mavic 2 pro, the choose firmware button is greyed out and not able to flash firmware. Everything else seem fine.

[2022-03-10 18:34:54] bin4ry : do you have a license for the drone? if not try to log out of the account and then restart the software. does it allow flashing now?

[2022-03-10 18:34:54] bin4ry : do you have a license for the drone? if not try to log out of yhe account and then restart the software. does it allow flashing now?

[2022-03-10 19:46:31] dronepilot : Any one aware of this?

[2022-03-10 19:47:57] joonas : 0015 on the fpv drone and goggles bumps antirollback (and pretty much nothing else). not sure about other devices.

[2022-03-10 19:47:57] joonas : 0015 on the fpv drone and goggles bumps antirollback. not sure about other devices.

[2022-03-10 19:50:15] infinitydrones : when trying to downgrade the air 2S firmware. I flash to the 09.09.0900, but then when the drone restarts and connect and I try and flash 02.04.2040 the drone restarts (disconnects and reconnects)... after 2 or so minutes the dronehacks logs say the following: Info: Fw has lower Antirollback value as drone. Need to downgrade via exploit! Info: Start flashing firmware process... Info: Using downgrade exploit! Error: Failed to enable downgrade! Info: Please flash needed firmware first before attempting to downgrade!

[2022-03-10 19:52:10] infinitydrones : It will stay greyed out until the Dronehacks app has loaded all the available exploits, then it will log you into the application and you can use the firmware flash section. That's what I'm experiencing with the Air2S i'm trying to downgrade as we speak.

[2022-03-10 20:21:15] infinitydrones : If I try and flash 09.09.0900 again the flash process of 09.09.0900 instantly completes and the drone restarts... Then the drone reconnects to the application and displays its firmware as 09.09.0900, but when I go to flash .2040 it gives the error...

[2022-03-10 20:21:15] infinitydrones : the flash process of 09.09.0900 instantly completes and the drone restarts... Then the drone reconnects to the application and displays its firmware as 09.09.0900, but when I go to flash .2040 it gives the error...

[2022-03-10 20:22:08] infinitydrones :

[2022-03-10 20:22:46] infinitydrones :

[2022-03-10 21:01:28] infinitydrones : on another pc i'm getting this error: Info: Start flashing firmware process... Info: Using downgrade exploit! Error: ExpShell Failed to enable downgrade! Info: Please flash needed firmware first before attempting to downgrade! Info: Searching for device... Info: Device connected!

[2022-03-10 21:35:18] flyingkite : I have 2 licenses that have not been activated yet. Looks like I had to be completely logged out of the account.

[2022-03-10 22:42:55] infinitydrones : did you try what I did? Go to the hacking page and wait for the exploits to all load first. Depending on internet connection it might take some time. I do think the Dronehacks servers are a bit slow this evening/day because I've been getting errors about not being able to download all the necessary files...

[2022-03-10 23:04:13] flyingkite : Yup I did before logging out of the account. After connecting, left it alone for over 10 min and the button was still greyed out. Logging out of the account did the trick.

[2022-03-11 04:29:22] bin4ry : see the birdmap! this version will kill any hacks and you will not be able to use another version again. (no upgrade no dowgrade)

[2022-03-11 04:30:56] bin4ry : so after completely logging out it works? if yes then I need to check it for the next release

[2022-03-11 04:32:36] bin4ry : so you have "DJI assisrant 2.for consumer drones" installed and disabled all Antivirus and Firewalls? because this looks correct until it fails and the last step where it uses a shell to the drone. make sure to always install the assistant 2

[2022-03-11 06:19:03] flyingkite : That's correct.

[2022-03-11 06:20:46] infinitydrones : I have that all installed as this is the machine I use to mod all the drones I get and the antivirus and firewalls are disabled... Any idea of what else I can try to get it working?

[2022-03-11 06:42:23] bin4ry : I will fix it then for the next release but good to know it works like this

[2022-03-11 06:42:54] bin4ry : let's take a look in the logs. send them to me via PM as they contain private data like the serial number etc.

[2022-03-11 07:45:59] infinitydrones : Will do, I'm just going to try a different machine and different internet connection once I get to the office. Will keep you posted

[2022-03-11 07:47:39] bin4ry : @infinitydrones please send the logs anyway, i need to check them to fix potential problems :)

[2022-03-11 10:23:15] cs2000 : Just added this firmware to DDD. Posted about it in ~dankdronedownloader but DJI seem to have removed .0020 and released .0015 and bumped the ARB#.

[2022-03-11 11:53:41] will : Hi @bin4ry, wondering if there is any plans to support the RC Pro with the DH Companion app? or is there any kind of limitation that would make it challenging?

[2022-03-11 11:56:16] bin4ry : the RC Pro currently cannot be added to the DH Companion. The reason is that the companion needs an usb connection to the controller to speak to the controller -> drone, on the rc pro this way cannot be used, on the smartcontrolelr devices only apps which go through dji and their sdk are allowed to speak to the controller/drone, and obviously we cannot do that. :( maybe there is a way around it, but that needs some more research, so the current answer would be: no sorry

[2022-03-11 11:58:52] will : ok I see, makes sense, thanks for the prompt reply :)

[2022-03-11 12:01:50] bin4ry : you are welcome

[2022-03-11 18:24:09] dronepilot : @bin4ry it won’t let me take off on firmware 01,02,0000 it tells me to update to the latest. It was flying perfect with the certificate now got stuck.

[2022-03-11 18:25:54] bin4ry : flash firmware 01.02.0020 then it should be gone NOT flash 0015!!!!!!!!!!!!

[2022-03-11 18:26:10] bin4ry : then when all is good downgrade to 01.02.0000 again

[2022-03-11 18:26:15] bin4ry : and hack again

[2022-03-11 18:26:47] bin4ry : and then keep your phone offline or even better never connect it again to the drone/goggles

[2022-03-11 18:27:42] bin4ry : it is always a big risk to connect any internet acticates devices to your drone as you can see. DJI is sneaky and tries to force you to update

[2022-03-11 18:28:11] bin4ry : so follow the instructions and DO NOT use the 15 Firmware, once on 15 you are fucked

[2022-03-11 18:28:37] bin4ry : flash to 01.02.0020 with dronehacks 1.25 and then fly with 01.02.0020 the error should be gone

[2022-03-11 18:28:47] bin4ry : once gone go down again and hack again

[2022-03-11 18:28:47] bin4ry : once gone go down again and back

[2022-03-11 18:29:11] bin4ry : I hope this helps

[2022-03-11 18:29:50] bin4ry : if any more questions please use support https://support.drone-hacks.com it is better because here it is luck if I see your question or not

[2022-03-11 18:31:33] dronepilot : Okay will do this now.

[2022-03-11 18:33:21] bin4ry : good! let me know the results, but I won't be online any longer for today, so when there is problems please write support, thanks :)

[2022-03-12 00:46:18] infinitydrones : Would like to update that my issue was resolved by moving to another machine and trying a beter/more stable internet connection. Sorry for the trouble.

[2022-03-14 01:19:59] dronepilot : Everything perfect @bin4ry on the dji fpv racer. In other hand still nothing on the M3? Only windows error.

[2022-03-14 06:05:54] bin4ry : good! for the M3 you never showed which error you get, I asked for a screenshot and/or a more precise description of the erorr before. please show It so that we can understand what error you have. without the exact error message I cannot tell you why. you are the first and only person having a problem with the M3 connection yet.

[2022-03-15 05:04:58] valtgun : valtgun joined the channel.

[2022-03-15 14:01:40] duc34 : duc34 joined the channel.

[2022-03-15 14:36:45] duc34 : "once on 15 you are fucked " , le retour en arriére ne sera jamais matériellement possible ou aucune solution n'a été trouvé et l'espoir de pouvoir remplacer le 01.02.0015 par un firmware permettant le hack existe-t-il encore?

[2022-03-15 15:00:50] dronepilot : Today i connected the M3 and parameters worked perfect no Windows error any more. Firmware flashing stayed grayed to upload only thing i noticed so far.

[2022-03-15 15:10:20] loveyou : Air 2S new firmware. https://forum.dji.com/forum.php?mod=viewthread&tid=261398&extra=page%3D1%26filter%3Dtypeid%26typeid%3D556%26typeid%3D556

[2022-03-15 15:12:05] bin4ry : logout of the desktop app to flash if you dont have a license (it is a bug!)

[2022-03-16 01:00:33] fredmicrowave : Tried 1.25 on M3, Win10, parameter mods works greatperfectly, thanks a lot for that ! Not sure which one are useful to be changed, I need to spend more time on it. I just modified climb and descent rate on sport mode to 8m/s ...

[2022-03-16 01:00:33] fredmicrowave : Tried 1.25 on M3, Win10, parameter mods works great, thanks a lot for that ! Not sure which one are useful to be changed, I need to spend more time on it. I just modified climb and descent rate on sport mode to 8m/s ...

[2022-03-16 01:03:31] dronepilot : Thanks everting solved.

[2022-03-16 01:03:58] fredmicrowave : g_config_airport_limit_cfg_cfg_limit_data doesn´t work :grin:

[2022-03-16 09:17:31] elintnl : Mini 2 firmware is out

[2022-03-16 09:17:36] elintnl : Overview: Date: 2022.03.16 Aircraft Firmware: V01.04.0000 Remote Controller firmware: V04.11.0032 DJI Fly App iOS: V1.5.10 DJI Fly App Android: V1.5.10 What’s New? Optimized flight safety.

[2022-03-16 09:18:57] bin4ry : antirollback bump

[2022-03-16 09:18:59] bin4ry : dont update

[2022-03-16 17:31:39] dereksynkopa : It is known that the antirollback is with the higher number, but which of the firmware modules is blocking the hacks, the one to fc (306)? Maybe the remaining 100 and 1200 modules can be loaded without harming the hacks? I am especially interested in the 1200 because it is twice the size of the previous one. Maybe they improved something in the operation of ESC? The module 100 is for the main image processor, and here too there may be some good fix.

[2022-03-16 17:38:27] bin4ry : it needs to be checked but yeah the fc is responible. but as said, i didn't check i cannot give any gurantee

[2022-03-16 17:50:59] dereksynkopa : I am thinking of removing the 306 module from the firmware and loading the rest. The problem is with antirollback 2 only. I think I will wait for DH-C to work out a way to go back to the previous firmware, as in the case of Air 2 and 2S. Are there such plans?

[2022-03-16 17:52:00] oakley75 : We used to be able to just rip out the 306 and update, but with their newgen antics, it'd be a gamble. No DJI trust nowadays for sure

[2022-03-16 17:58:38] bin4ry : well plans are always there, but i do not like to give promises for stuff that is not ready and not made. so .... until now i can only suggest to stay away from the update.

[2022-03-16 17:58:38] bin4ry : well plans are always there, but i do not like to give promises for stuff that is not ready and not made. so .... currently i can only suggest to stay away from the update.

[2022-03-16 18:02:35] oakley75 : Respect for that, as always friend

[2022-03-16 20:13:49] loveyou : With the new Air 2S DJI firmware update v02.04.21.50, the Air 2S is now fully supported in Litchi for Android including gimbal control. What are we doing now; Now i use firmware v02.04.2040

[2022-03-17 05:12:51] bin4ry : to use the hacks you need to use 2040

[2022-03-17 06:16:52] elintnl : thanks

[2022-03-17 08:17:01] loveyou : i know :)

[2022-03-17 19:53:41] flyingkite : Hey all. Which Fly app version are most using along with the cert hack? I got my mav2, air2s and mini2 all set with the recommended firmware and now getting ready to install the fly app before moving further with the cert.

[2022-03-18 21:38:00] speatuk :

[2022-03-19 04:21:54] pxesrv : pxesrv joined the channel.

[2022-03-19 05:07:39] velhojow : velhojow joined the channel.

[2022-03-20 07:28:28] zwon : zwon joined the channel.

[2022-03-20 11:31:02] dronepilot : Any chance to disable battery autolanding on M3, Air 2s and Mini 2?

[2022-03-20 12:55:29] stanlee : bat_enable_smart_bat_landing_protect (set to 0)

[2022-03-20 14:28:04] dronepilot : This config is like battery type on the older models?

[2022-03-20 15:24:09] weimings : weimings joined the channel.

[2022-03-21 00:47:44] stanlee : No. There is still a battery type param. But it’s locked. This will simply prevent it from auto landing with low battery.

[2022-03-21 01:57:51] dronepilot : Nice so no need to change battery type anymore to prevent battery autolanding?

[2022-03-21 09:26:56] ggonzalez : ggonzalez joined the channel.

[2022-03-21 12:53:39] stanlee : Nope - no need.

[2022-03-21 12:54:07] stanlee : Just test it since it has been a while since I tested it.

[2022-03-22 11:25:29] dronepilot : Perfect tested out no more battery autolanding. Any chance to disable battery auto rth?

[2022-03-22 14:43:41] stanlee : Hmmm... I'll have to look into that. I just hit cancel - does yours automatically auto return?

[2022-03-22 19:21:35] dronepilot : Yes i also have the option to hit cancel. Would be nice if nothing showed up.

[2022-03-22 19:56:14] stanlee : Sorry - I wish I could help you there. I think changing the battery type would be the only way and it is locked in the Air2S and M3.

[2022-03-23 01:08:26] dronepilot : Correct battery type was my option on older birds. But since the air 2 it would only allow to change in a certain firmware anything passed that wouldn’t be able to change.

[2022-03-24 01:27:07] anethema : anethema joined the channel.

[2022-03-24 01:29:40] anethema : hey guys I bought the regular license for the FPV. I wanted to upgrade to the pro license. do you need to buy both or is there a way to upgrade somehow if the regular isn't needed once you have pro ?

[2022-03-24 05:10:03] dakilla : dakilla joined the channel.

[2022-03-25 12:44:54] jjuk : jjuk joined the channel.

[2022-03-26 22:54:10] faineg : faineg joined the channel.

[2022-03-27 21:56:23] artoleus : artoleus joined the channel.

[2022-03-29 13:43:20] robertosmera : @dronepilot Did you test the battery autolanding on the M3? Thank you.

[2022-03-29 14:07:41] mingtao :

[2022-03-30 11:15:36] windoze : windoze joined the channel.

[2022-03-30 21:16:58] azerbaijan : skyhack.RU???

[2022-03-31 22:02:20] ma89to : ma89to joined the channel.

[2022-04-01 10:59:30] kon : kon joined the channel.

[2022-04-01 16:03:00] fil007 : fil007 joined the channel.

[2022-04-03 11:07:52] mangadiso : midgelf joined the channel.

[2022-04-04 09:01:25] infinitydrones : Does Drone Hacks support the M300 RTK?

[2022-04-04 09:02:51] infinitydrones : Just want to be sure before I buy a license

[2022-04-04 10:21:51] argonaut : argonaut joined the channel.

[2022-04-04 15:14:20] pingspike : is it listed on the bird map page @infinitydrones ?

[2022-04-04 16:07:10] infinitydrones : m300 is but not the m300 rtk - i'm 99% sure its the same drone (but that little voice in my head is saying... check before you buy)

[2022-04-04 17:03:39] cs2000 : @bin4ry can confirm. They are the same drone, one has the additional RTK hardware however and also has a different model number so I’m guessing it will say it’s not supported. could maybe be good to add though if not. Of course, bin4ry could already have thought of this and added in support anyway, but I’m sure he can confirm when he gets a spare moment ?

[2022-04-04 17:09:36] the_lord : There is only one model M300 RTK, and to get the RTK functionality you need the RTK ground station (D-RTK 2 High Precision GNSS Mobile Station)

[2022-04-04 21:37:56] john_duff : john_duff joined the channel.

[2022-04-05 13:22:39] dronepilot : Is it possible to downgrade air2s firmware 02.04.2150 to 02.04.2040?

[2022-04-05 13:25:25] bin4ry : yes its possible

[2022-04-06 02:33:52] darius : darius joined the channel.

[2022-04-06 02:40:29] will : Hello @bin4ry, did you ever managed to increase the sports mode ascending/descending speeds on the Mavic 3? I tried months ago with `dji-firmware-tool` then recently with the latest DH app, no matter what I set I always get the default values (+8/-6) even though I can actually see my values being stored on the drone, any hints?

[2022-04-06 10:02:54] bin4ry : hey, well this are reset/limited by the drone itself. we can write them to other values but it is ignored and capped out. currently there is no way around it

[2022-04-06 10:09:41] bin4ry : some air2s litchi user here? if so please write me a pm please

[2022-04-06 11:06:17] loaderbull : @bin4ry i use it for my M2 Pro, am wanting to use it with A2S also but only available on newest drone firmware which obviously removes your hack which i have :/

[2022-04-06 11:06:42] bin4ry : that is what i am not understanding

[2022-04-06 11:07:30] bin4ry : i have a litchi version (but i never used it yet), the firmware is 2040 on the air2s here. i cannot understand which features are missing? i wanted someone to explain me so i can go testing

[2022-04-06 11:07:32] bin4ry : ^^

[2022-04-06 11:08:01] loaderbull : I can try it indoors once home? See what it says, weather awful here so can’t check outside. I’m under the impression it is waypoints that do not work perhaps?

[2022-04-06 11:08:29] bin4ry : everything helps, just trying to understand

[2022-04-06 11:33:42] dronepilot : The gimbal messes around using waypoint on litchi with 2040 firmware. That’s why you need to upgrade the to the latest firmware on the 2s. If you upgrade no more DH hack.

[2022-04-06 11:35:59] bin4ry : but what means messes around

[2022-04-06 11:36:26] bin4ry : i want to understand the actual behaviour so i can test and maybe patch it :)

[2022-04-06 15:13:31] will : so mean these parameters if modified will only be valid until reset?

[2022-04-06 15:50:16] loaderbull : The params do NOTHING when set.

[2022-04-06 15:50:34] loaderbull : If above what the max is surpassed

[2022-04-06 17:51:49] quad_fan : quad_fan joined the channel.

[2022-04-07 07:57:40] goguma : goguma joined the channel.

[2022-04-07 20:56:43] sambuko : shtigran88 joined the channel.

[2022-04-10 20:10:10] hiddentty : hiddentty joined the channel.

[2022-04-11 11:34:05] bin4ry : 0015 FPV users willing to do a test pm me please, one test spot only ;)

[2022-04-11 11:49:38] windoze : Is .810 on enterprise safe with DH cert? Or must it be .800?

[2022-04-11 11:57:19] bin4ry : we were not able to test this yet. but both 800 and 810 have the same antirollback value. So you can install the 800 -> install the cert -> update to 810 and check if it is still good. if it is stil good i would be happy about a report so we can add 810 to the supported firmware list :)

[2022-04-11 21:37:54] dronepilot : Trying to downgrade M3 .600 firmware back to .300 it doesn’t start. Same ARB value any clue?

[2022-04-11 22:04:10] stanlee : I think there was a lot of fuckery with GPS code. You likely get a lot of GPS errors and it won't start?

[2022-04-11 22:37:25] dronepilot : It won’t start the downgrade.

[2022-04-11 22:49:37] fredmicrowave : Any special reason to want to downgrade ? Some had issues with slow GPS up to .500, but works fine with me. Lower than .500 you lose important features...

[2022-04-11 23:14:49] dronepilot : Nice gps for me .400, 500 and 600 wanting to do some testes transmission strength readout on a lower firmware.

[2022-04-11 23:14:49] dronepilot : Nice gps for me 400, 500 and 600 isn’t a problem. Want to do some transmission testes on a lower firmware.

[2022-04-11 23:15:38] dronepilot : Does the rc downgrade firmware as well?

[2022-04-12 00:12:13] fredmicrowave : Sorry, idk, I did not perform any downgrade ...

[2022-04-12 00:45:32] stanlee : Slow gps was actually up to 600. It began at 400. And many still have the issue at 600.

[2022-04-12 00:45:49] stanlee : Only 300 had normal gps.

[2022-04-12 01:44:38] dronepilot : Any chance on downgrading to .300?

[2022-04-12 03:24:33] prz3mk0 : prz3mk0 joined the channel.

[2022-04-12 13:46:26] joh : joh joined the channel.

[2022-04-12 18:05:10] hotelzululima : hotelzululima joined the channel.

[2022-04-18 13:13:53] sambuko : Hi

[2022-04-18 13:14:42] sambuko : Can i downgrade from Air2s from 02.04.2150 to 02.04.2040? Need i license for it?

[2022-04-18 13:14:42] sambuko : Can i downgrade from 02.04.2150 to 02.04.2040? Need i license for it?

[2022-04-18 13:14:42] sambuko : Can i downgrade from Air2s from02.04.2150 to 02.04.2040? Need i license for it?

[2022-04-18 13:18:25] cs2000 : @alximiktik yes you can downgrade. https://drone-hacks.com/birdmap

[2022-04-18 13:18:59] sambuko : because app dont alow me flash 02.04.2040. Ok thank you

[2022-04-18 13:24:43] sambuko : Please add in web site Armenia

[2022-04-20 13:06:09] tics : tics joined the channel.

[2022-04-21 05:21:39] jjbyrnes29 : jjbyrnes29 joined the channel.

[2022-04-22 19:41:29] quad808 : Just going to put this out there, I have re-joined the DH team effective immediately. Email support and you may get my help! Thank you for the continued support of DroneHacks. We appreciate it!

[2022-04-22 21:16:00] pingspike : welcome back! I didn’t know you’d left them ?

[2022-04-22 21:16:31] pingspike : soooo, about the Autel Evo FCC… ?

[2022-04-22 23:54:23] quad808 : I tried and tried to get that worked on.....

[2022-04-23 02:22:49] lordhelmchen666 : Is there any news about the 01.02.0015? The firmware 01.02.0020 is somehow not offered to me for download. sorry about the bad english.

[2022-04-23 13:02:50] speatuk : Question if anyone can answer. With the recent “downgrade/update” of the DJI FPV. If we have the 01.02.0000 firmware on the drone and as reports have warned, if we connect the goggles to the flyapp, we are “grounded” until we upgrade to 01.02.0015. How do we get the flight logs from the goggles/drone without being forced to update? Thank you in advance if anyone can answer this question. ??

[2022-04-23 16:57:18] il1oo0 : You can use DJI ASSITSTANT 2 FOR FPV to export flight log, but the exported data is encrypted

[2022-04-23 17:01:36] speatuk : I am wanting if possible to upload to Airdata. As I want to interrogate the logs. Could I upload the flight log manually to Airdata? Thanks ?

[2022-04-23 17:24:11] speatuk : Which files do I need to upload to Airdata I am led to believe I need the .txt files not the .dat files. Anyone.?

[2022-04-23 18:57:30] nz-maori : TXT

[2022-04-23 20:49:38] speatuk : Thanks @nz-maori ??

[2022-04-25 21:19:46] cs2000 : Have you checked DDD? You don’t mention which drone you have, but it’s most likely on there

[2022-04-26 04:25:24] lordhelmchen666 : Dji fpv drone

[2022-04-26 10:48:12] cs2000 : Yeah, its on DDD mate

[2022-04-26 10:48:14] cs2000 : !DDD

[2022-04-26 10:48:14] cs2000 : QDDD

[2022-04-26 10:48:30] cs2000 : !DDD

[2022-04-26 10:48:30] dji-rev-bot : The DankDroneDownloader Windows EXE can be found here: https://github.com/cs2000/DankDroneDownloader For all non-windows users, there is also a web browser based version here: http://dankdronedownloader.com/DDD2/app/

[2022-04-26 14:21:27] lordhelmchen666 : Why is the antirollback of 02/01/0015 higher than that of 02/01/0020?

[2022-04-26 14:36:53] lordhelmchen666 : is there also a downgrade for the glasses?

[2022-04-26 15:04:12] joonas : 0020 was released earlier, they were fighting the exploits, but forgot to increase arb.

[2022-04-26 15:04:23] joonas : 0015 is actually newer. same exact fw image, just arb=2

[2022-04-26 16:26:50] lordhelmchen666 : Can you flash the Google now? If yes how? Finished the drone downgrade now

[2022-04-26 16:27:14] lordhelmchen666 : Sorry for my Bad english

[2022-04-26 19:39:09] randersen : randersen joined the channel.

[2022-04-27 03:40:32] tmwsiy : tmwsiy joined the channel.

[2022-04-27 03:43:17] tmwsiy : I previously used DH on my Air2s and M2P. I purchased a new license for a new Air2s and attempted to use DH again. I flashed v09.09.900 and now I am confused if that was the Air2s or the M2P firmware that I had to downgrade to first before installing 02.04.2040 in the 2 step process. I now can't seem to flash any other firmware.

[2022-04-27 06:30:00] lordhelmchen666 : I think you flashed the wrong firmware

[2022-04-27 19:55:24] quad808 : @tmwsiy its a two step process. You did the first step in flashing 09.09.900, now flash 02.04.2040 using DroneHacks. Air2S. Watch this great video done by @infinitydrones https://youtu.be/De63Sx3jVyo

[2022-04-27 20:34:29] tmwsiy : Thanks very much. I've used this tool twice before, once with the Air2s, I understand that it's a two-step process. I think I figured out that the issue is is that the exploit wasn't applied. It's just not letting me install the proper firmware. I think I need to go back to my previous version, downgrade again to 09.09.900 and then try again

[2022-04-28 21:57:58] vtcats : vtcats joined the channel.

[2022-04-29 04:29:21] quad808 : Guess what all you DJI FPV racers? Do you LOVE DroneHacks or what?

[2022-04-29 04:32:01] quad808 : Wait. What? Stuck on firmware 01.02.0015 you say and want to be on firmware 01.02.0000? Well....you begged, you requested, and we have done it for you. Update your DH version to v1.26 and have at it.

[2022-04-29 04:32:01] quad808 : Wait. What? Stuck on firmware 01.00.0015 you say and want to be on firmware 01.00.0000? Well....you begged, you requested, and we have done it for you. Update your DH version to v1.26 and have at it.

[2022-04-29 04:33:40] quad808 : With a license you can now downgrade from the previously "locked" 01.02.0015 firmware to 01.02.0000 and enjoy some hacks.....

[2022-04-29 04:36:40] quad808 : https://drone-hacks.com/blog/post/716

[2022-04-29 11:16:22] c050351 : @quad808 Why does DH not support Alipay payment now?

[2022-04-29 17:02:02] il1oo0 : Since Bin4ry left, there is a lot of silence here, I miss your days here, so, who is the official spokesperson of DH

[2022-04-29 18:10:54] quad808 : @c050351 We are checking with our payment provider, but Alipay throws an error in the payment process...DH may be blocked by Alipay, so we have enabled Wechat as another payment process.

[2022-04-29 18:12:18] quad808 : @il1oo0 We don't really have an "official" spokesperson, but always feel free to email support with any questions you have, or post them here, and we will do our best to answer them and help out.

[2022-04-29 21:19:38] fredmicrowave : @quad808 Can we expect future progress for drones like the M3, or is the research halted ?

[2022-04-30 02:01:59] il1oo0 : @quad808 Thank you, we are all concerned about the M3. Can you give us some information (:

[2022-04-30 14:30:25] joonas : @cs2000 do you know who i should get in contact with in regards to the ota signing api dronehacks is providing for the diy fpv community now that bin4ry is gone?

[2022-04-30 14:30:50] joonas : we need to enable CORS access to that API for a web based rooter.

[2022-04-30 15:45:37] cs2000 : @joonas drop me a private message if you could ?

[2022-04-30 17:14:30] templvr : templvr joined the channel.

[2022-04-30 17:16:02] templvr : ayo boys - can someone help me out. I just bought DJI FPV & It's wanting me to update firmware before I fly. Can I hack it in this state? How do I tell what firmware this bitch is on

[2022-04-30 17:16:35] templvr : i new here so i have no idea whats going on lol

[2022-04-30 17:39:11] templvr : I think I'll just update it and hack it back to the reccommended firmware

[2022-04-30 18:23:59] quad808 : @fredmicrowave DH will continue much work in the background, just like before, so no changes. Once we get breakthroughs, we will always announce it here and on our site! No worries, but at the same time, no promises can be made.

[2022-05-01 01:54:26] fredmicrowave : Great, thanks !

[2022-05-05 04:25:51] matty : matty joined the channel.

[2022-05-06 02:27:37] prz3mk0 : is there an option to upgrade from regular license to adb rootshell?

[2022-05-06 02:27:37] prz3mk0 : is there an option to upgrade from regular license to adb rootshell? MA2

[2022-05-06 02:29:42] prz3mk0 : for Googles V2 there's no way to downgrade from 0015 yet, right? 1.26 is just for the drone

[2022-05-06 02:30:14] prz3mk0 : is it still safe to connect Googles V2 to iPhone in airplane mode running Fly 1.5.10?

[2022-05-06 17:29:53] quad808 : No downgrade for goggles, but yes, you can connect IN AIR PLANE MODE and no forced upgrades

[2022-05-06 20:46:22] flyingsnoopy : flyingsnoopy joined the channel.

[2022-05-07 00:01:48] quad808 : anyone around that has a Mavic 2 Pro with DH unlocking cert installed can PM me? I need to check a setting in Go 4. Thanks

[2022-05-07 03:08:23] speatuk : This music to my ears. I have not connected my goggles due to the fear of forced upgrade/downgrade. Yes I know we can now downgrade through DH. But why have to do all the hassle of you don’t have to? Question. Will this load the flight logs of the FPV drone to the fly app for later upload? Asking as I need to interrogate the logs but not wanting to go through the hassle of the above if I don’t have to. Many thanks ?

[2022-05-07 03:08:23] speatuk : This music to my ears. I have not connected my goggles due to the fear of forced upgrade/downgrade. Yes I know we can now downgrade through DH. But why have to do all the hassle if you don’t have to? Question. Will this load the flight logs of the FPV drone to the fly app for later upload? Asking as I need to interrogate the logs but not wanting to go through the hassle of the above if I don’t have to. Many thanks ?

[2022-05-07 06:14:45] atlantic : @atlantic left the channel.

[2022-05-09 20:44:19] azerbaijan : Greetings! In slack this thread had much more life, after migrating to mattermost, no messages for weeks. Maybe i made something wrong and someone can guide me, where disscussion continues?

[2022-05-09 22:08:30] doctor : @azerbaijan If you can help or want to make it known that you can you will probably be contacted......

[2022-05-10 11:06:27] d95gas : Most have day jobs and so cannot just sit on here. I bet once the Mini 3 is released, you might see a hive of activity on here :smile: Hopefully from DH

[2022-05-10 15:06:13] fredmicrowave : Mini 3 has just been released :p

[2022-05-10 20:18:28] disposalone : disposalone joined the channel.

[2022-05-10 21:17:05] deadnull : deadnull joined the channel.

[2022-05-11 09:15:42] vorno : vorno joined the channel.

[2022-05-11 10:36:40] zorast : zorast joined the channel.

[2022-05-11 10:40:51] zorast : Hi there !! :-) I Just buy the DJI FPV and getting my Drone in the next Days. I read about the Downgrade Lock coming with new Firmwares. So my question is, what I have to do when I getting my Drone to prevent and update when activating the Drone? So I thing a new Drone has do be connected and activated online and then it will be auto update or force an update before flight?? Thanks for your help!

[2022-05-11 10:45:14] joonas : @zorast https://github.com/fpv-wtf/margerine/wiki/Activating-the-DJI-FPV-Combo

[2022-05-11 10:46:28] joonas : i should update the guide now that dh supports goggles flashing fully, but it should still work as is.

[2022-05-11 11:00:11] zorast : hi joonas ! Thanks a lot, I read this wiki and hopefully I getting it worked. A Unlock Drone is what the all have pay for!!! But I have a little Problem, I do only have MacBooks and IOS Devices. Did u know does this also work with Parallels ?

[2022-05-11 11:31:15] joonas : hard to say for sure, but i think it should, if you're able to connect the proper usb devices to the vm.

[2022-05-11 11:31:41] joonas : you might need to run dji asstant in parellels anyway as it's broken on the latest os x.

[2022-05-11 11:33:32] joonas : i will note though that now that dh has goggles flashing support, you could, instead of the complicated rooting procedure, just flash your goggles to v01.02.0020 like the drone, activate them together (along with the rc) and then downgrade both.

[2022-05-11 11:42:56] zorast : Ok thank I wil test is Monday when my Drone comes. Just read a little on DH, they write that it will not be work on VM

[2022-05-11 11:43:07] zorast : I will test it and report then !

[2022-05-11 11:46:40] zorast : And DH write that installing DJI Assistant for Mavic is for all Drones possible

[2022-05-11 11:47:05] zorast : I think DH only need a driver support

[2022-05-11 16:51:31] quad808 : Correct. DH uses the DJI device drivers for USB connection. If you can detect your drone with DJI Assistant without problems, then DH "should" work fine, but no guarantees using VM...we have seen problems. Native Win 10 is best.

[2022-05-11 18:32:21] areoc : areoc joined the channel.

[2022-05-12 07:31:58] zorast : Ok i ordered a Surface Laptop Go for this. Don't know If there is Windows 11 already installed. Is Windows 11 also supported ?

[2022-05-12 10:48:42] plcybek : plcybek joined the channel.

[2022-05-12 19:51:39] quad808 : While Windows 11 may work, we officially support Windows 10 for now. If DJI Assistant can detect your drone on Windows 11, DH will to, but it has not been vetted to work with all functions. (it will probably work fine, but still have to give the caveat.)

[2022-05-13 12:25:14] asae2207 : asae2207 joined the channel.

[2022-05-13 18:51:15] zorast : I just receive my Drone and its Produced 21/12 so he Firmware has to be ok for unlock ;D

[2022-05-13 18:51:37] zorast : Starting now hopefully also will work

[2022-05-13 18:51:41] zorast : all

[2022-05-13 19:17:47] zorast : The Ask me, Bum Anti Rollback ?

[2022-05-13 19:18:08] zorast : Iam just want to install 1.2 don't know why they ask warn me then

[2022-05-13 19:51:57] zorast : Test it with Beta Hopefully it works!!

[2022-05-14 17:01:39] zorast : soss!clox1REW-dew

[2022-05-14 17:01:45] zorast : does not work correctly

[2022-05-14 17:01:52] zorast : getting so many errors !!

[2022-05-14 17:01:57] zorast : Can not fix that

[2022-05-14 17:02:31] zorast : npm install

[2022-05-14 17:38:16] zorast : try to install visual studio and addons for c++ to

[2022-05-14 17:54:09] zorast : Ok, is there a way to get de DIY Mode when the force activation is enabled ?

[2022-05-14 17:54:32] zorast : I can not got to settings now but have to active the DIY Mode.

[2022-05-14 17:55:05] zorast : I Try do refresh the 1.02.0000 Firmware on the classes but the force update ist always showing

[2022-05-14 18:00:10] zorast : I Stuck now on this case, alls things worked but Glasses are not in DIY so I can't root them. I did not find how to get them to DIY Mode when the force activation/Update is showing ??

[2022-05-14 18:24:35] quad808 : What exactly are you trying to do? If you have a license open a support ticket at DH.

[2022-05-14 18:29:36] zorast : I think I got it I have to flash 01.00.0603 first on the googles

[2022-05-14 18:29:54] zorast : I want to bypass the Force activation/update on the Goggles

[2022-05-14 18:31:08] zorast : Or can u update the Goggles to latest version and only let the Drone to be at 1.02.000 ?

[2022-05-14 18:32:31] quad808 : Yes, update the goggles to get rid of the forced update, OR you can connect up an iOS device, run DJI FLY and it should get rid of the forced updated message you are getting....don't use DJI FLY with internet connection.

[2022-05-14 18:54:29] zorast : Ah Nice it works when phone is connected in ariplane mode

[2022-05-14 18:54:30] zorast : :)

[2022-05-15 09:21:24] zorast : First Flight today Done, I think all worked perfect !!

[2022-05-15 09:21:42] zorast : I flight about 800m without Problem

[2022-05-15 09:22:52] zorast : Also the Google does not show me anymore the Force Update. Don't know why because iam at 1.02.0000. I only Downgrade to 1.01 and then to 1.02 again and its gone

[2022-05-15 09:23:04] zorast : Tanks for support !!

[2022-05-15 09:23:07] zorast : Thanks

[2022-05-15 09:23:24] zorast : :D Have a Nice Weekend to all !!!

[2022-05-15 13:25:33] asdasdvoid : asdasdvoid joined the channel.

[2022-05-16 17:03:42] areoc : Can dji mini2 be downgraded?

[2022-05-16 17:04:14] areoc : how is it going now

[2022-05-16 18:25:10] quad808 : not currently if you are on firmware 01.04.0000, but possible on other firmwares.

[2022-05-17 12:30:26] pelfed : pelfed joined the channel.

[2022-05-17 19:48:39] speatuk : I have updated the flyapp to 1.6.1 and can confirm all working with the DH exploits. Tested on A2s, A2, Mini 2 just need the exploit for the Mini 3 and the Mavic 3 now. Full house.

[2022-05-17 19:48:39] speatuk : I have updated the flyapp to 1.6.1 and can confirm all working with the DH exploits. Tested on A2s, A2, Mini 2 just need the exploit for the Mini 3 and the Mavic 3now. Full house.

[2022-05-19 08:06:04] trulala69 : Hi, is the Mini3 already implemented in DH for parameter reading/writing? I have one sitting here on my desk ... Does anyone know the WMxyz of this bird already? Thanks ...

[2022-05-19 10:37:56] tmbinc : wm162

[2022-05-19 14:00:45] cat.db : can not downgrade

[2022-05-19 14:01:09] cat.db : it is stock!

[2022-05-19 18:02:49] d95gas : @quad808 Hi Buddy, long time no speak, loads of crap been going on so only just getting back into the drones. Got the new Mini 3 Pro to try and give me a lift. Any news of the OG getting their mitts on one yet to work their magic?

[2022-05-19 18:22:39] quad808 : hey my man.....I don't think anyone has looked at it yet. Do you have like the Mini 2 or Air 2s? I would be curious about range with the Mini 3 with the pro controller vs the older RC without the screen. haven't seen any tests done this way, but from what I am seeing the range is not so great with the Mini3, unless its just CE mode being tested so far.

[2022-05-19 19:50:26] speatuk :

[2022-05-19 19:51:04] speatuk : FCC, CE is very poor

[2022-05-19 20:41:58] speatuk : This was not mine by the way.

[2022-05-19 21:40:13] loaderbull : Lots of people having range issues with Mini 3. Including FCC. Some tests i have seen are 1500m and signal drops and returns home, and this is in open ground not urban setting…

[2022-05-19 22:09:18] quad808 : yah, not sure whats going on with the mini3 yet, is it the RC? I am waiting for someone to pair the other RC and do a test in the same area...it can work with the RC from the Mini 2 and Air2S, correct?

[2022-05-19 22:34:36] loaderbull : That’s correct yes, true i haven’t heard any reports on the standard RC, just the all-in-one RC. If FCC is that bad, CE will be all but useless here in the UK. I’m sure (as much as i can be) it’s a resolvable firmware issue but only time will tell i guess…

[2022-05-19 23:39:31] fredmicrowave : If they working their magic I hope it´s by order of appearance, M3 need it :p

[2022-05-20 09:19:35] eddy : Some RC comparison tests have been performed (CE and FCC):: https://www.youtube.com/watch?v=BU8ZGBQMALU Final result:: https://youtu.be/BU8ZGBQMALU?t=889 My opinion after all this is that probably the biggest problem is placing the antennas on the Mini3. Does anyone have a photo from inside the Mini3?

[2022-05-20 09:19:35] eddy : Some RC comparison tests have been performed (CE and FCC):: https://www.youtube.com/watch?v=BU8ZGBQMALU Final result:: https://youtu.be/BU8ZGBQMALU?t=889

[2022-05-20 09:19:35] eddy : Some RC comparison tests have been performed (CE and FCC):: https://www.youtube.com/watch?v=BU8ZGBQMALU

[2022-05-20 09:52:04] speatuk : This is not what I used. The hack is on the drone and works like the DH exploit works. So it works with any controller

[2022-05-20 09:54:12] speatuk : It works with either controller. As the hack is on the drone.

[2022-05-20 10:16:39] loaderbull : We are talking about stock, not modified. A comparison of standard Mini 3 controller vs the built in screen controller. Not anything to do with firmware or drone modifications. There are many reports of reduced range on the Mini 3 with the controller with built in screen. You are confusing subjects @speatuk

[2022-05-20 10:33:14] speatuk : Ok sorry to confuse anyone. That was not the point. I was trying to point out the hack where you connect the RCN1 first then the new RC without turning off the drone is not the way I have it. I have my Drone on FCC. So it works with any controller as such I can’t do a comparison with CE anymore. (UK based so I should be on CE) The difference is amazing.

[2022-05-20 11:17:11] loaderbull : Got you. Yes the issue people are suggesting is that the new RC is very poor on range. We were wondering what the range (in comparison) is like with the RCN1 ?

[2022-05-20 11:47:29] speatuk : As the photo above a friend of mine got 2 miles urban very “busy” wifi area before disconnecting. He sent me that to show me it works.

[2022-05-20 19:44:58] zorast : Ok the poor range is the first reason for me to not buy the Mini 3 Pro

[2022-05-20 19:45:19] zorast : :(

[2022-05-20 19:50:39] zorast : https://www.youtube.com/watch?v=_6kliYfD5C8

[2022-05-20 21:11:28] poopnondji : https://youtu.be/bYzOBEAbkoA

[2022-05-21 19:36:18] stanlee : What a retarded looking guy.

[2022-05-21 20:46:17] speatuk : ?

[2022-05-22 09:31:35] jack117wb : jack117wb joined the channel.

[2022-05-22 17:24:29] mat213 : mat213 joined the channel.

[2022-05-22 18:02:53] emeraldmaster : emeraldmaster joined the channel.

[2022-05-23 08:22:57] zorast : DH, can u implement HDMI/Video Output over USB-C on the DJI Mini 3 Pro with Pro Controller/DJI RC :-)

[2022-05-23 11:57:17] bod : bodopo joined the channel.

[2022-05-23 23:47:32] bzyku69 : bzyku69 joined the channel.

[2022-05-24 11:13:14] dronepilot : Fly App v1.6.2 any one tested?

[2022-05-24 12:16:12] stanlee : I think only iOS - well, not in the RC Pro.

[2022-05-24 12:16:24] stanlee : RC Pro is 1.6.1

[2022-05-24 13:34:37] zorast : https://www.youtube.com/watch?time_continue=188&v=Jwb7p4rbhSA&feature=emb_logo

[2022-05-24 13:34:49] zorast : Enable Subtitle ;D

[2022-05-25 06:07:06] zorast : Its so hard to decide which drone to buy.. DJI Mini 3 Pro or Air2s.. The Main Problem is that DH has no hacks till now for the Mini 3 Pro so the Air2S is better when I want to "Free" :(

[2022-05-25 08:26:56] infinitydrones : Air 2S is still the better drone

[2022-05-25 08:27:24] infinitydrones : only thing it doesn't have is usb charging and vertical shooting - Get the S :)

[2022-05-25 08:40:00] airiver : Have air 2s, and want to change to mini 3 pro. Battery charging in mini series much easy and faster than air2/2s. Better for traveling.

[2022-05-25 11:16:34] zorast : The Mini 3 also does now support 10bit after new Firmware update. Flight Time can be 47 Minutes with Plus Batteries. I think for normal use this is best Drone and when want to Film for more Professional use the Mavic 3 will be the best pick.

[2022-05-25 12:45:37] zorast : But don't forget to order the ND Filters, the Mini 3 Pro has a lot more light incoming into sensor

[2022-05-25 13:51:30] squeck : squeck joined the channel.

[2022-05-26 10:34:53] zorast : Hab gerade noch was interessantes zur Air2s gefunden: *** FocusTrack ist bei Aufnahmen in 5,4K/30fps, 5,4K/25fps, 5,4K/24fps, 4K/60fps, 4K/50fps, 4K/48fps, 2,7K/60fps, 2,7K/50fps, 2,7K/48fps, 1080p/120fps, 1080p/60fps, 1080p/50fps und 1080p/48fps nicht verfügbar. FocusTrack kann bei der Aufnahme von 5,4K Videos nicht verwendend werden. **** APAS 4.0 ist bei Aufnahmen in 5,4K/30fps, 5,4K/25fps, 5,4K/24fps, 4K/60fps, 4K/50fps, 4K/48fps, 2,7K/60fps, 2,7K/50fps, 2,7K/48fps und 1080p/120fps nicht verfügbar.

[2022-05-26 10:37:48] zorast : Also there for Mini 3 Pro: 2. APAS 4.0 ist nicht verfügbar, bei Videoaufnahmen mit 4K/48fps, 4K/50fps, 4K/60fps, 2.7K/48fps, 2.7K/50fps, 2.7K/60fps und 1080p/120fps. 3. HDR-Video unterstützt keine Videoaufnahmen über 30 fps. 4. FocusTrack ist nicht verfügbar, bei Videoaufnahmen mit 4K/48fps, 4K/50fps, 4K/60fps, 2.7K/48fps, 2.7K/50fps, 2.7K/60fps, 1080p/48fps, 1080p/50fps, 1080p/60fps und 1080p/120fps.

[2022-05-26 10:38:27] zorast : Limitations of Active Track, APS etc with Resolutions and FPS

[2022-05-26 13:51:19] item1979 : item1979 joined the channel.

[2022-05-26 18:32:29] jjbyrnes29 : English @zorast

[2022-05-26 22:36:31] speatuk : Here you go. Just found something interesting about the Air2s: *** FocusTrack is for recordings in 5.4K/30fps, 5.4K/25fps, 5.4K/24fps, 4K/60fps, 4K/50fps, 4K/48fps, 2.7K /60fps, 2.7K/50fps, 2.7K/48fps, 1080p/120fps, 1080p/60fps, 1080p/50fps and 1080p/48fps not available. FocusTrack cannot be used when recording 5.4K videos. **** APAS 4.0 is available when recording at 5.4K/30fps, 5.4K/25fps, 5.4K/24fps, 4K/60fps, 4K/50fps, 4K/48fps, 2.7K/60fps, 2.7K/ 50fps, 2.7K/48fps and 1080p/120fps not available.

[2022-05-26 22:37:17] speatuk : Here it is translated Just found something interesting about the Air2s: *** FocusTrack is for recordings in 5.4K/30fps, 5.4K/25fps, 5.4K/24fps, 4K/60fps, 4K/50fps, 4K/48fps, 2.7K /60fps, 2.7K/50fps, 2.7K/48fps, 1080p/120fps, 1080p/60fps, 1080p/50fps and 1080p/48fps not available. FocusTrack cannot be used when recording 5.4K videos. **** APAS 4.0 is available when recording at 5.4K/30fps, 5.4K/25fps, 5.4K/24fps, 4K/60fps, 4K/50fps, 4K/48fps, 2.7K/60fps, 2.7K/ 50fps, 2.7K/48fps and 1080p/120fps not available.

[2022-05-26 23:26:42] zorast : Yes ;) there also same things for Mini 3 Pro: HDR only for 30fps or less fps Videos and Focus Track not available @ 4K/48fps, 4K/50fps, 4K/60fps, 2.7K/48fps, 2.7K/50fps, 2.7K/60fps, 1080p/48fps, 1080p/50fps, 1080p/60fps und 1080p/120fps

[2022-05-26 23:27:02] zorast : This Guy reach 4 km with Mini 3: https://www.youtube.com/watch?v=8vEVtHZ5bHc

[2022-05-27 06:12:03] zorast : Same here: https://www.youtube.com/watch?v=8X-AeA2JMWk

[2022-05-27 18:52:36] dereksynkopa : Do you already know if the new firmware v04.14.0117 for the RC-N1 for the Mini 3 pro does not disable the DH for the mini 2? I'm going to use the RC-N1 for both drones.

[2022-05-27 19:36:42] infinitydrones :

[2022-05-27 19:36:58] infinitydrones : anyone know why i'm getting this when trying to update a Mini 2?

[2022-05-28 08:52:50] dereksynkopa : I have not encountered such a problem, unless you are trying to load the firmware that you modified. I would try on a different computer first.

[2022-05-28 18:03:38] zorast : I think best option is to open a ticket at DH

[2022-05-28 19:54:20] quad808 : @infinitydrones Go back to basics and make sure all conditions are met such as turning off anti-virus, firewalls etc. If after many failed attempts, and no joy....try this trick. Power off the drone and power it on, like you are going to fly it. Connect fully up to RC etc. Then shut it down. Do this 3 times. There is a certain flag in the firmware that needs a reset, and sometimes drones fail to flash unless this is done. However, it "looks" like the firmware is throwing an error on the upload of the firmware to the drone. This shouldn't happen, and could even be a bad cable.

[2022-05-28 21:52:01] speatuk : The DH is on the drone not the remote. I have used the RCN1 remote for my Mini 2 on my Mini 3 and the hack remains on the Mini 2. My Mini 3 has also had the FCC hack on the drone so it works in FCC with the RC remote or the RCN1

[2022-05-29 07:05:14] dereksynkopa : More FCC power must be enabled on both the aircraft and the remote control. I know the FCC hack is for a drone but I can imagine that with the new firmware it is possible to lock the power surge in the remote hence my question. How to run FCC on mini 3 pro?

[2022-05-29 13:17:53] speatuk : Seams like only one person knows how to do this and he is keeping the way he does it to himself.

[2022-05-29 16:00:11] tmbinc : FCC vs. non-FCC depends on the country code; the remote syncs to the drone so you need to change the country code in the drone (which you can either do by send a DUML - potentially over the remote link - to the drone or by doing it on the drone itself, like the DH Mini2 hack does).

[2022-05-30 17:08:43] zorast : So finally I go with the Air2s... Is there something i had to beware when activating the Smart Controller or RC Pro and the Air2s ? In Birdmap i read that all Air2s Drone Firmwares can be Downgraded. So can i connect the Drone and Controller with DJI and make all updates > Activate > than Downgrade and Hack the Drone ?

[2022-05-30 23:14:51] zorast : Here's something i found : https://www.youtube.com/watch?v=E1p_G6uDsSo

[2022-05-31 10:00:02] zorast : I Just make the Hack on my Air2s, I see there is a Hack for RC Pro comptaiilty. Is there any known issue with the recommended Firmware 2.04.2040 and and the RC Pro Controller? I Just ordered the RC Pro and want to use them with my Air2s.

[2022-05-31 10:02:01] zorast : Or is there any less in functionality with this "older" Firmware version and the RC Pro Controller ?

[2022-05-31 10:24:26] zorast : Or is there any Problems in enable Hacks and using the Smart Controller or RC Pro witch probably using the DJI Fly App ? The Message after Hacking shows me that never update the Fly App again... Hmm some experiences will be nice :)

[2022-05-31 13:52:17] zorast : Just check the Changelog https://dl.djicdn.com/downloads/DJI_Air_2S/20220119/DJI_Air_2S_Release_Notes_en.pdf from Air2s Drone Firmware, did not see big changes after 2.04.2040 so I think that will not be a problem. But some things to beware on the RC Pro Side ?

[2022-05-31 13:54:22] zorast : Found this, but don't have any experience.. Anyone here ?? :) https://dl.djicdn.com/downloads/DJI_RC_Pro/20220325RN/DJI_RC_Pro_Release_Notes_EN_20220323.pdf

[2022-05-31 16:47:41] quad808 : Remember that DH hacks the drone, not the RC. The hack for RC Pro compatibility was added to allow you to use the RC pro on firmware that didn't have support for it, probably because the RC Pro wasn't out when the firmware came out.

[2022-05-31 17:56:25] zorast : Can I use the latest Firmware versions on my RC Pro and control my Air2s with Hacked Firmware 2.04.2040 ?

[2022-05-31 17:56:42] zorast : Or is there something I have to beware when updating the RC Pro ?

[2022-05-31 17:59:49] zorast : The latest RC Pro Firmware is: v03.01.0600 with DJ Fly App v1.5.10 installed

[2022-05-31 18:43:27] quad808 : First, lets remember that this is a Drone-Hacks channel, and lets keep discussions about using Drone-Hacks and how much you love it. Any other posts not about Drone-Hacks should be made in one of the other channels.

[2022-05-31 18:46:57] quad808 : Once you apply the patch to get the drone working with the RC Pro, you should be good to go. The drones firmware is the important thing, not the RC firmware. BUT....as with all things hacking, once you get everything working together....if you continue to update firmware, no telling what "tricks and traps" DJI will put in the firmware to try and get rid of Drone-Hacks. This is why we have recommended firmware and tell people to always fly with your device in airplane mode. As always, the choice is yours what to do.

[2022-05-31 19:21:17] zorast : Ok iam understand this, on my DJI FPV i did not connect Fly App again after Hack. In Future i will waiting for ure confirmation if there Is an update available. On the Air2s i did not have seen the answers i want to get about the RC PRO compatibly with A2s Drone Firmware 2.04.2040. So i will use latest RC Pro Firmware till today and then do not update Drone or RC Pro till get a confirmation from DH again that this will work correctly.

[2022-05-31 21:02:33] cs2000 : cs2000 updated the channel purpose to: A place to go for help or questions around the Drone-Hacks application available from Drone-Hacks.com

[2022-06-01 09:10:02] zorast : Just receive my RC PRO and can confirm that RC Pro Firmware v03.01.0700 and A2s Drone Firmware 2.04.2040 with DH Hacks works well!

[2022-06-04 16:51:38] gummo99 : gummo99 joined the channel.

[2022-06-06 08:56:10] zorast : Just found a problem in using RC PRO Firmware v03.01.0700 and Air2s with DH Firmware 2.04.2040. There's some Problem when losing Signal. Normally it has to reconnect again and show the Video Signal, but it does not show anymore a picture when losing the connection first time. I have to land and reboot the Drone to get Video Signal again. Did someone know a solution for that? I think there is a problem with Fly APP, it freezes also when tapping on screen to getting connection again. The Control Sticks works well but it freezes the Picture I guess..

[2022-06-06 10:41:22] infinitydrones : Sounds like a dji fly app problem and not a dronehacks problem

[2022-06-06 14:40:26] fredmicrowave : Exactly. I had app crash with RC pro when hitting video record and weak signal. RC rebooted but no connection, I had t manually shut it down again to get connection. All that with strong wind, way below take off altitude, and above water, seemed to take forever.

[2022-06-06 14:40:55] fredmicrowave : ...And no dronehacks

[2022-06-06 20:25:40] zorast : Today lose connection and connect again without problems. But this time I was in the mountains. Last time I was in Town., to many inferences ?

[2022-06-06 20:25:40] zorast : Today lose connection and connect again without problems. But this time i was in the Mountains. Last time I was in Town., to many inferences ?

[2022-06-06 20:25:40] zorast : Today lose connection and connect again without problems. Bus this time I was in the mountains. Last time I was in Town., to many inferences ?

[2022-06-07 12:05:27] bod : Hey guys. Has anyone got any ideas how I might go about rolling a Mavic 2 Pro all the way back to FW 01.00.0100? Its too old for the assistant app. My understanding is that DUMLDore doesnt support Mavic 2's? I tried anyway with a DDD FW download. The drone hung with the lights flashing. On a reboot the FW hadnt been changed. I want this specific FW version so I can give the Drone Hacks "enable ADB" module a go to have a little root around with a shell. Looking at the birdmap on drone hacks it appears to be the only FW that will allow this. Thanks!

[2022-06-07 16:55:30] quad808 : DJI changed the ARB value in the firmware, so no way to downgrade back to 01.00.0100 without an exploit. None available unfortunately.

[2022-06-08 15:19:09] loveyou : New DJI Air2S Firmware Released (6/08/2022) Overview: Date: 2022.06.08 Aircraft Firmware: v02.04.21.70 Remote Controller: v04.12.00.56 DJI Fly App iOS: v1.6.4 DJI Fly App Android: v1.6.4 What's New? Optimized user experience, and improved overall software stability.

[2022-06-08 16:58:41] quad808 : Translation? We are trying to close exploits and stop anyone from modding their drones, 'cause you know....we are DJI.

[2022-06-08 21:35:25] zorast : No one knows what they did :smile:

[2022-06-08 23:22:24] infinitydrones : exactly :(

[2022-06-09 12:15:32] bod : thanks for the reply. What is the ARB value? Any documentation I should be reading?

[2022-06-10 03:23:47] poohtocs : ARB anti roll back

[2022-06-10 13:28:12] fredmicrowave : Has anyone successfully upgraded a Mavic3 with Dronehacks? I doesn´t work with me, freezes on the first seconds a 0% . Using win10, tried different cables , configurations and computers... Disabled firewall... With and without RC on, Sd card... It detects the drone OK, but when you hit "flash firmware" DH freezes and you have to force close it.

[2022-06-10 13:32:33] fredmicrowave : (and installed assistant2 but not running)

[2022-06-10 19:52:42] sparkyws : I think you should recheck the bird map

[2022-06-10 20:48:42] fredmicrowave : ? I am not trying to unlock it, just flash firmware, and DroneHacks seem to support the M3 for that.

[2022-06-10 21:13:12] droneuser : @droneuser left the channel.

[2022-06-10 22:51:27] oakley75 : @fredmicrowave I know you're not new here or anything, but by chance are you on fw 700? One could wonder if that shady fw broke something w dh. The fw did "play" with duml ya know. Just a thought friend

[2022-06-10 23:05:03] fredmicrowave : All OK, tnx ! I am on 500, trying to upgrade to 655, with no luck. At some point it almost looked like it worked, but got stuck. Tried to wait forever, run DH in admin, disabled AV, nothing works :/ I could try to upgrade to 600 to check if it has something to do with the firmware... And yes good to keep away from 0700 since it has antirollback.

[2022-06-10 23:33:13] oakley75 : That's likely the winner, baby-step the fw up like we used to do back in MP1 days. Maybe that beta does indeed need 600 first. Good luck!

[2022-06-11 01:59:25] fredmicrowave : Thanks, but I can now safely say that DroneHacks firmware flashing is not working with the Mavic pro 3 . Upgraded to 0600 with Assitant2, ruling out local problems...

[2022-06-11 03:53:42] oakley75 : Had a thought, did you verify in task manager that dji assistant didn't have a process running unbeknownst to you? Can't trust windows processes lol. In fact, I see drone-hacks process stuck often enough. Like I have to kill it manually, then start dh fresh.

[2022-06-11 11:33:34] fredmicrowave : I just did, but could not fin anything related to it anywhere, even after plugin in the M3. But it would imply to be a general problem for all Win10 users... Also, drone detection and parameters readings is working fine. It´s just when DH try to upload, or put the AC in upgrade mode, that the problem occurs. I also noticed that the button that calls DDD is not working.

[2022-06-11 11:33:40] fredmicrowave : Thanks

[2022-06-12 02:11:52] stanlee : I think it is the latest DH version that doesn’t work. I noticed it worked on the prior version but not the current version - so something must have changed. Only flashing. Everything else works.

[2022-06-12 14:09:12] fredmicrowave : Yes @stanlee , it worked with DH1.25 , thanks a lot ! Aeroscope disable is still available (But not on the last fly app version)

[2022-06-12 14:58:54] fredmicrowave : The funny part is that I did try this earlier version but on another PC, where it did not work, for some reason.

[2022-06-12 15:43:02] nz-maori : @fredmicrowave did you use DH for disabeling AS?

[2022-06-12 21:19:10] fredmicrowave : @nz-maori , no, it is just available under "safety" on the RC pro depending of the fly app version... (However I have now a RC pro problem now, not booting any more. It is unrelated to the drone firmware update since it has been off. It just began to reboot by itself, getting worse each time . Pretty much pissed off, it´s new. )

[2022-06-12 23:03:02] stanlee : In the latest Fly app you can no longer disable aeroscope under the “safety” menu. Can you disable it under DH?

[2022-06-13 00:11:36] fredmicrowave : I don´t think so, I think it was Kf that said Duml command did not work any more with aircraft firmware 0700. So it looks like it was disabled in AC 0700, but also in app from 0600 or above.

[2022-06-13 19:23:07] quad808 : remember that "disabling" areoscope in the app actually doesn't disable it at all

[2022-06-13 19:23:28] quad808 : another DJI fake out

[2022-06-13 19:25:51] zorast : https://www.youtube.com/watch?v=UD9pa4rSWWo

[2022-06-13 20:31:26] dereksynkopa : Well i am working on this idea too but i ordered directional antennas. These antennas are classic omni-directional so there won't be much improvement. The real challenge is to change the antennas on the drone, because here is the main Achilles' heel. I'm working on it too.

[2022-06-13 21:16:27] fredmicrowave : Are you sure? Since CIA jeeps doors works, this could also work ?

[2022-06-14 18:06:23] quad808 : In the app, all you are doing is limiting the info sent out via Aeroscope. You are not turning off Aeroscope/droneid. DJI would not allow you to do that, with their "world domination" push with the Aeroscope plan. Keep in mind I am not talking about CIA jeep doors, or any other 3rd party programs. Just the DJI Fly app itself. CIA jeep doors showed that it was possible to do.

[2022-06-16 03:31:32] skarzhevsky : skarzhevsky joined the channel.

[2022-06-17 15:10:05] il1oo0 : AIR2S FW2190 DH also support downgrade to FW2040 and install certificates?

[2022-06-17 15:10:05] il1oo0 : AIR2S FW2190 DH also support installing certificates?

[2022-06-17 15:54:21] infinitydrones : stay away!

[2022-06-17 19:40:53] quad808 : There have been recent releases of new firmware, bumping the ARB yet again. If you don't see it listed in DH Birdmap, stay far away. While we will look at the new firmware, no way at this point to determine the hacking ability of them. Always, ALWAYS pay attention to the birdmap and don't upgrade firmware without checking that. *Just to add...most new firmware just is put out to bump ARB to prevent you from downgrading and hacking your drone. Way to go DJI. NOT.

[2022-06-17 19:40:53] quad808 : There have been recent releases of new firmware, bumping the ARB yet again. If you don't see it listed in DH Birdmap, stay far away. While we will look at the new firmware, no way at this point to determine the hacking ability of them. Always, ALWAYS pay attention to the birdmap and don't upgrade firmware without checking that.

[2022-06-17 21:22:44] cs2000 : This is exactly what they did on the MP3 and it got me so pissed off. They fixed a critical bug (GPS took minutes to get a fix) and along with it, bumped the ARB number as a big "screw you". Luckily the beta versions had all the fixes, but kept the older, lower, ARB number, which is why i made the last beta a publicly accessible firmware on DDD. DJI have released firmware in the past few weeks for most of their currently supported models, almost all of them came with an ARB bump, be careful! DDD can tell you the ARB number if i have the firmware listed, but as @quad808 says, if its not on the DH birdmap and you wish to use DH, don't upgrade.

[2022-06-17 21:22:44] cs2000 : This is exactly what they did on the MP3 and it got me so pissed off. They fixed a critical bug (GPS took minutes to get a fix) and along with it, bumped the ARB number as a big "screw you". Luckily the beta versions had all the fixes, but kept the older, lower ARB number, which is why i made it public on DDD. DJI have released firmware in the past few weeks for most of their currently supported models, almost all of them came with an ARB bump, be careful! DDD can tell you the ARB number if i have the firmware listed, but as @quad808 says, if its not on the DH birdmap and you wish to use DH, don't upgrade.

[2022-06-17 21:22:44] cs2000 : This is exactly what they did on the MP3 and it got me so pissed off. They fixed a critical bug (GPS took minutes to get a fix) and along with it, bumped the ARB number as a big "screw you". Luckily the beta versions had all the fixes, but kept the older, lower, ARB number, (some modules even had the same SHA256 hash, so were exactly the same!) which is why i made the last beta a publicly accessible firmware on DDD. DJI have released firmware in the past few weeks for most of their currently supported models, almost all of them came with an ARB bump, **be careful!** DDD can tell you the ARB number if i have the firmware listed, but as @quad808 says, if its not on the DH birdmap and you wish to use DH,** don't upgrade**.

[2022-06-17 21:22:44] cs2000 : This is exactly what they did on the MP3 and it got me so pissed off. They fixed a critical bug (GPS took minutes to get a fix) and along with it, bumped the ARB number as a big "screw you". Luckily the beta versions had all the fixes, but kept the older, lower, ARB number, which is why i made the last beta a publicly accessible firmware on DDD. DJI have released firmware in the past few weeks for most of their currently supported models, almost all of them came with an ARB bump, **be careful!** DDD can tell you the ARB number if i have the firmware listed, but as @quad808 says, if its not on the DH birdmap and you wish to use DH,** don't upgrade**.

[2022-06-18 09:36:34] zorast : So you're Beta 01.00.0655 ist the latest MP3 Firmware without ARB

[2022-06-18 09:36:34] zorast : So you're Beta 01.00.0655 ist the latest MP3 Firmware without ARB. Bute where I can download this? Can not find it in online DDD

[2022-06-18 09:36:34] zorast : So you're Beta 01.00.0655 ist the latest MP3 Firmware without ARB. Bute where I can download this? Can not find it in online DDD. Only find 01.00.0100

[2022-06-18 10:38:51] cs2000 : It’s definitely there, I’ve just checked

[2022-06-18 10:58:01] zorast : Can not find it there :(

[2022-06-18 11:08:53] d95gas : Is that not the MAVIC MINI 3 you are looking at and not the Mavic 3

[2022-06-18 11:12:11] d95gas : I can se 01.00.0655 just fine

[2022-06-18 13:03:32] zorast : Iam testing it with Safari, Firefox and Chrome now but only see the 0100 firmware. Can u Download for me the correct firmware and send me here ?

[2022-06-18 13:45:56] d95gas : Thats a bit bizarre..... Have you tried using DDD Application: https://github.com/cs2000/DankDroneDownloader/find/master

[2022-06-18 13:57:15] d95gas : Dont know what country you are in, but possibility you are blocked, if the application doesn't work, then load up a VPN and try again

[2022-06-18 14:31:36] sparkyws : @zorast Look under Mavic Pro 3 (wm260) You will find it there

[2022-06-18 14:31:36] sparkyws : Look under Mavic Pro 3 (wm260) You will find it there

[2022-06-18 14:46:55] zorast : Thanks that works fine !!!

[2022-06-18 19:32:57] sparkyws : ??

[2022-06-18 22:42:37] azerbaijan : Can someone explain, cia jeep doors now removed broadcasting of droneid?

[2022-06-19 09:14:36] flymymavic : Found a true drone police ?

[2022-06-19 11:24:36] enwineer : enwineer joined the channel.

[2022-06-19 17:31:56] quad808 : "the FAA here in the USA needs to contact the FAA in your country." I don't see how that would work, since no one from the FAA would answer in your country. :rolling_on_the_floor_laughing: Idiot.

[2022-06-20 21:48:28] infinitydrones : @quad808 I've not been able to get Dronehacks to detect my DJI FPV goggles... am I missing something?

[2022-06-20 22:22:26] joonas : @infinitydrones they need to be booted into dji fpv mode rather than diy mode. maybe that's it?

[2022-06-20 22:23:15] joonas : oh and also goggles v1 or v2? only v2s in fpv drone mode are supported.

[2022-06-20 22:23:15] joonas : oh and also goggles v1 or v2? only v2s in fpv drone mode are supportedd.

[2022-06-21 05:49:36] zorast : Did u use DH GlassSpecial ?

[2022-06-21 06:45:19] infinitydrones : I'll check if that is the case. If it is then it really needs to be mentioned on the DH webpage :)

[2022-06-21 06:45:49] infinitydrones : Sorry, I'm not sure what you mean? Could you give me more info please?

[2022-06-21 07:18:30] infinitydrones : I've tested this... DH app does not detect the goggles at all. FPV or in Air unit mode. Tried 2x different sets of goggles as well, no luck

[2022-06-21 07:21:08] zorast : u can read about this GlassSpecial here: https://github.com/fpv-wtf/margerine/wiki/Activating-the-DJI-FPV-Combo and u can download it here: https://drone-hacks.com/release/win/dh-win-v1.25-GlassSpecial.exe With this version u will be able to flash ure Goggles :)

[2022-06-21 08:57:45] joonas : that's outdated, i should really update it. the latest DH release includes Goggles support.

[2022-06-21 08:57:45] joonas : that's outdated, i should really update it. the latest DH release includes Goggles v2 fpv drone mode support.

[2022-06-21 08:58:12] joonas : if it's v2 goggles and they're not being detected in fpv drone mode then it's some kind of driver issue.

[2022-06-21 08:58:46] joonas : try installing dji fpv assistant 2/dji assistant 2 like the dh instructions say.

[2022-06-21 09:00:37] joonas : what are you trying to achieve btw? you can also flash to 0606 from assistant in diy mode freely, unless you arb bumbed yourself with 0015.

[2022-06-21 09:12:51] infinitydrones : i have done that and its not working

[2022-06-21 09:13:21] infinitydrones : on my youtube channel the comments section has lots of guys asking the same thing..

[2022-06-21 09:14:08] joonas : does the device show up for you in configurator?

[2022-06-21 09:14:08] joonas : does the device show up for you in assistant?

[2022-06-21 09:14:30] infinitydrones : it shows in assistant but not in DH

[2022-06-21 09:14:48] joonas : hmm, okay, so it's not a usb host vs gadget mode issue with usb-c either.

[2022-06-21 09:15:40] infinitydrones : its just strange becasue my dji googles for my fpv gear does not detect and my dji goggles for my dji fpv drone does not detect either

[2022-06-21 09:23:16] joonas : make sure assistant is closed while you're doing this? idk ¯\\_(ツ)_/¯ it works for me and lots of other people that have followed the guide. hopefully someone from DH can assist you in figuring this out.

[2022-06-21 09:23:16] joonas : make sure assistant is closed while you're doing this? idk ¯\_(ツ)_/¯ it works for me and lots of other people that have followed the guide. hopefully someone from DH can assist you in figuring this out.

[2022-06-21 09:24:13] infinitydrones : so your goggles detect in DH app?

[2022-06-21 09:27:10] joonas : yup and i've walked a bunch of people through the process previously as well.

[2022-06-21 09:28:05] joonas : maybe look at the logs in C:\Users\\{username}\\.dronehacks\ for any clues

[2022-06-21 09:28:05] joonas : maybe look at the logs in C:\Users\{username}\.dronehacks\ for any clues

[2022-06-21 09:28:52] infinitydrones : my goodness... i have 2x goggles here and they not working. MMM I'll have to go and take a look at it. Maybe redownload the dh app and log in

[2022-06-21 09:29:11] joonas : shouldn't need log in. but yeah make sure you're on the latest app. 1.26.

[2022-06-21 09:30:39] infinitydrones : as far as I know, it should be as simple as 1)make sure the goggles in dji fpv drone mode 2) use dh 1.26 (as per my youtube vid) 3) power up 4) connect to pc... But for some reason both goggles do not detect but i was able to update the firmware on them via assistant

[2022-06-21 09:31:11] joonas : oh, wait, did you upgrade to 0015 with assistant?

[2022-06-21 09:31:52] infinitydrones : goggles should be on 0015 as per the dronehacks fpv racer mod

[2022-06-21 09:32:57] joonas : it should still detect them afaik, but i'm sorry to say you're boned in any case. 0015 can't be downgraded, it increased the antirollback value.

[2022-06-21 09:33:15] joonas : (unless you happened to root the goggles with margerine before upgrade)

[2022-06-21 09:34:39] infinitydrones : i've not rooted, but as far as i know the margerine root exploit does not work after 0015

[2022-06-21 09:34:50] infinitydrones : but also, dh should still detect it at least

[2022-06-21 09:35:02] joonas : it should yes. but it definitely won't let you flash.

[2022-06-21 09:35:11] joonas : if you rooted before upgrading to 0015 it still works.

[2022-06-21 09:35:18] joonas : (i should know, i'm the author for margerine)

[2022-06-21 09:35:39] infinitydrones : oooh then I'm very happy to get to know you haha

[2022-06-21 09:37:40] joonas : no idea why dh isn't detecting it. maybe look in here...

[2022-06-21 10:45:33] infinitydrones : just tried a different machine and the goggles detect. As you stated, if you're on 0015 then you cannot do anything really. I'm still on 01.00.06.06 on my one set

[2022-06-21 10:50:43] joonas : either something is keeping the serial port busy on the other machine or maybe it's still a driver issue. might want to compare the comport drivers windows reports.

[2022-06-21 10:50:43] joonas : either something is keeping the usb serial port busy on the other machine or maybe it's still a driver issue. might want to compare the comport drivers windows reports.

[2022-06-21 10:50:43] joonas : either something is keeping the usb serial port busy on the other machine or maybe it's still a driver issue. might want to compare the com port drivers windows reports.

[2022-06-21 10:51:56] infinitydrones : Since its my personal set and the 01.00.06.06 firmware is not available anymore on the dji fpv mode side. Which firmware versions increase the antiroll back number? I know 0015 has the highest number, but not sure if 01.01.0020 is downgradable to 01.01.0000 for example. Is there anywhere I can check?

[2022-06-21 11:10:31] joonas : 0020 is downgradeable, 0015 is the only arb bumb

[2022-06-21 11:10:31] joonas : 0020 is downgradeable, 0015 is the only arb bump

[2022-06-21 11:10:41] joonas : 0606 is flashed from diy fpv side

[2022-06-21 11:10:51] joonas : they both flash both fw-s, it's not true "multi boot"

[2022-06-21 11:14:47] fredmicrowave : Have you tried a DH 1.25 or another previous version? It was the only way for me to flash a MP3 , 1.26 recognised it but failed communication.

[2022-06-21 11:20:04] joonas : 1.25 didn't support the goggles anyway

[2022-06-21 11:23:25] fredmicrowave : Ah ok

[2022-06-21 11:34:04] infinitydrones : I think i'll keep my one set on 01.00.06.06 (factory firmware) since I've not had and black screens of death like some other users have had since updating

[2022-06-21 11:34:37] infinitydrones : I know my dji fpv (air unit side) firmware is 01.00.06.06 as well.

[2022-06-21 12:38:26] joonas : if you root with https://testing.fpv.wtf/ (don't need to install any mods or even wtfos, just the root) beforehand then the black screen of death and can't switch back to diy mode issue can be solved via CLI without any additional flashing.

[2022-06-21 12:38:26] joonas : if you root with https://testing.fpv.wtf/ (don't need to install any mods or even wtfos, just the root) beforehand then the black screen of death and can't switch back to diy mode issue can be solved via CLI without any additional flashing if it does happen to you.

[2022-06-21 12:41:41] infinitydrones : We've had issues where you're flying and the goggles just restart randomly. Flashing the dji racer firmware and the the dji goggles firmware fixed that issue

[2022-06-21 12:42:30] joonas : yeah that was a known issue with one of the earlier fpv drone mode fws

[2022-06-21 13:19:06] zorast : For me same !! Only the 1.25 works for me with the Goggles V2

[2022-06-21 13:19:06] zorast : For me same !! Only the 1.25 GlassSpecial works for me with the Goggles V2

[2022-06-21 13:20:42] zorast : How can i flash the Beta Firmware to my M3P ? Is DH support the Mini3Pro flashing ? When connecting the M3P to DH its connected but shows a error. But Parameter changing works fine. Want to test firmware flashing but the Beta Firmware I have is not compatible...

[2022-06-21 13:20:42] zorast : How can I flash the Beta Firmware to my M3P ? Is DH support the Mini3Pro flashing ?

[2022-06-21 13:20:42] zorast : How can i flash the Beta Firmware to my M3P ? Is DH support the Mini3Pro flashing ? When connecting the M3P to DH its connected but shows a error. But Parameter changing works fine. Want to test firmware flashing but the Beta Firmware i have is not compatible...

[2022-06-21 13:43:48] zorast : Did also not seen any release node for RC Controller Firmware 01.00.0300

[2022-06-21 14:29:28] zorast : When using this Firmware with DH it shows me this Firmware is not compatible with connected device :( Can someone send me the correct Beta Firmware ?

[2022-06-21 14:29:28] zorast : When using this Firmware with DH it shows me this Firmware is not compatible with connected device :(

[2022-06-21 14:29:28] zorast : When using this Firmware with DH it shows me this Firmware is not compatible with connected device :( Can someone send me the correct Beta Firmware V01.00.0655 for M3P ?

[2022-06-21 14:29:28] zorast : When using this Firmware with DH it shows me this Firmware is not compatible with connected device :( Can someone send me the correct Beta Firmware V01.00.0655 ?

[2022-06-21 14:53:36] zorast : Finally I understand what the issue was, MP3 u mean Mavic Pro 3. I did understand Mavic Mini 3 Pro...

[2022-06-21 17:19:08] quad808 : Good discussions guys. If I had Goggles, I would chime in, but alas, for me...no DJI FPV or goggles. I leave the specifics to the bigger brains at DH......

[2022-06-21 23:07:22] deniss-i979 : deniss-i979 joined the channel.

[2022-06-22 11:31:28] sample : sample joined the channel.

[2022-06-22 16:52:34] quad808 : Well now....looky, looky...what do we have here? A little present from your friends at Drone-Hacks: https://drone-hacks.com/blog/post/722

[2022-06-22 19:52:14] doctor : @Drone-Hacks.com FTW! :+1:

[2022-06-22 21:25:55] zorast : Very Nice thanks a Lot!! I change yesterday my parameters on my Mini 3 Pro with DH 1.26. It works fine. So more parameters will come with next update?

[2022-06-23 11:29:09] asdrubale : Hi can some people explain what is the difference on mini 2 from generation 1 (SN 3) and generation 2 (SN 5)?

[2022-06-23 14:40:26] oakley75 : A very good question, wish I knew the specifics.

[2022-06-24 09:14:05] mats.ruden : mats.ruden joined the channel.

[2022-06-26 06:47:03] sparkyws : https://www.forbes.com/sites/davidhambling/2022/06/24/ukraines-quadcopters-avoid-russian-jamming---and-target-russian-drone-operators/

[2022-06-26 11:55:55] dereksynkopa : Based on the analysis of the firmware differences, it can be concluded that module 100 is different. Potential functions of this module are: GPU upgrade. There is probably some hardware change. No details.

[2022-06-26 11:55:55] dereksynkopa : Based on the analysis of the firmware differences, it can be concluded that module 100 is different. Potential functions of this module are: P4P, P4, i2, Mavic Camera Upgrade. There is probably some hardware change. No details.

[2022-06-26 14:07:18] zorast : In my opinion, there have to be an OFF Toggle for professional usage in disable DJI Aerospace

[2022-06-26 14:48:35] tmbinc : Afaik, Mini 2 had a WiFi chipset change, nothing major, but required firmware changes (and FCC re-certification) for it.

[2022-06-26 14:49:04] tmbinc : Several core tools around Wifi/BT now exist in an additional ".old" version, and the scripts run the old or new version depending on the HW rev

[2022-06-27 01:15:31] airsheen : airsheen joined the channel.

[2022-06-27 08:11:20] sample : Any tips on getting DJI Matrice 210v2 RTK firmware? As it stands, it is not supported by the app

[2022-06-27 17:22:02] sledziu : sledziu joined the channel.

[2022-06-29 14:40:43] zorast : Did someone know whait this does? Changing the Voltage level 2 to 3500 and set this to 0/2 will expand flight time? Airs2s:

[2022-06-29 14:40:43] zorast : Did someone know whait this does? Changing the Voltage and set this to 0 will expand flight time? Airs2s:

[2022-06-29 14:40:43] zorast : Did someone know whait this does? Airs2s:

[2022-06-29 14:40:43] zorast : Did someone know whait this does? Changing the Voltage to 3500 and set this to 0/2 will expand flight time? Airs2s:

[2022-06-29 14:40:43] zorast : Did someone know whait this does? Changing the Voltage level 2 to 3500 and set this to 0/2 will expand flight time? Air2s:

[2022-06-29 14:40:43] zorast : Did someone know whait this does? Changing the Voltage to 3600 and set this to 0/2 will expand flight time? Airs2s:

[2022-06-29 14:40:43] zorast : Did someone know whait this does? Changing the Voltage level 2 to 3500 and set this to 0/2 will expand flight time? Air2s:

[2022-06-29 15:54:03] zorast : Probably changing this settings does not have mutch differrence, it still does show red circle about 10% rest Battery in FlyApp. When changing this Settings on my Mini3Pro it works well and does only show a litte read circle about 1% in FlyApp. Any solution here for gettings this protect setting down to 0-3% ?

[2022-06-29 16:31:26] airsheen : probably not a good idea tbh, you'll decrease battery lifespan

[2022-06-29 16:32:58] airsheen : I *believe* bat_level_1_action is low battery warning and the controller beeping, and bat_level_2_action is forced RTH or possibly forced landing. That or level 1 is RTH and level 2 is forced landing in place

[2022-06-29 17:40:30] zorast : Yes I now, but I know when to come back don't what that the flyApp show me 20 Warning. I figure out that "level2 smart battert land" is force landing that does works fine, it does only force land on 0%. But "level2 smart battert gohome" does not have any effect..

[2022-06-29 17:40:30] zorast : Yes I now, but I know when to come back don't what that the fly App Show me 20 Warning. I figure out that "level2 smart battert land" is force landing that does works finde, it does only force land on 0%. But "level2 smart battert gohome" does not have any effect..

[2022-06-29 17:40:30] zorast : I figure out that "level2 smart battert land" is force landing that does works finde, it does only force land on 0%

[2022-06-29 17:40:30] zorast : Yes I now, but I know when to come back don't what that the flyApp show me 20 Warning. I figure out that "level2 smart battert land" is force landing that does works fine, it does only force land on 0%. But "level2 smart battert gohome" does not have any effect.. Also this has to be disable to prevent force Landing: g config bat config enable smart bat landing portect from 1 to 0

[2022-06-29 17:40:30] zorast : Yes I now, but I know when to come back don't what that the flyApp show me 20 Warning. I figure out that "level2 smart battert land" is force landing that does works finde, it does only force land on 0%. But "level2 smart battert gohome" does not have any effect..

[2022-06-29 17:40:30] zorast : I figure out that "level2 smart battert land" is force landing that does works finde, it does only force land on 0%, But "level2 smart battert gohome" does not have any effect..

[2022-06-29 17:40:30] zorast : Yes I now, but I know when to come back don't what that the flyApp show me 20 Warning. I figure out that "level2 smart battert land" is force landing that does works fine, it does only force land on 0%. But "level2 smart battert gohome" does not have any effect.. Also this case to be disable to prevent force Landing: g config bat config enable smart bat landing portect from 1 to 0

[2022-06-29 19:00:37] airsheen : there's many parameters that you can change that don't apply to the model of drone you have. It could be that as well

[2022-06-29 19:01:34] airsheen : check if it gets overwritten if you change it. I've had that happen to a lot of parameters too

[2022-06-29 22:10:41] fredmicrowave : I hope we will be able to disable all those warnings on M3 too at some point, they are just too intrusive and stupidly repetitive... How many times they ruined a good video sequence ...

[2022-06-29 22:39:30] airsheen : The high wind warning on my mini SE is so obnoxious too. You can tweak it on the mini but not the mini SE/2, I get them pretty much every flight over and over. The max altitude reached warning in dji go as well

[2022-06-29 22:40:14] airsheen : A little bit of turbulence makes it pop up again even if you dismiss it or change the max altitude a little bit higher

[2022-06-29 23:01:23] quad808 : There are many parameters that DJI locks you out from changing, even though it appears to save the changes. Resets upon startup.

[2022-06-30 00:37:42] drlov : [

[2022-06-30 00:37:45] drlov : ][

[2022-06-30 07:15:59] zorast : Is there any way there DH can make this for us true? Force manual Parameters and bypass DJI Parameters Hack from DH? :)

[2022-06-30 07:15:59] zorast : Is there any way there DH can make this for us true? Force manual Parameters and bypass DJI Parameters Hack from DH? :smiley:

[2022-06-30 07:22:38] zorast : On Mini3Pro u can change a lot. U can also change the max tilt about 5 degree too! The A2s are not much faster as the Mini3 then! I was very disappointing when i see how much the A2s drain battery in far distance Flights about 500m to 2km compare with the M3P. The smaller Drone train his Battery much more less.. Probably in small ranges about 0-500m u will not see a much difference, but flight the drain in far distances from spot to spot u will better use the Mini3P. Can not compare with the M3, still not have one :/

[2022-06-30 07:22:38] zorast : On Mini3Pro u can change a lot. U can also change the max tilt about 5 degree too! The A2s are not much faster as the Mini3 then! I was very disappointing when i see how much the A2s drain battery in far distance Flights about 500m to 2km compare with the M3P. The smaller Drone train his Battery much more less.. Probably in small ranges about 0-500m u will not see a much difference.

[2022-06-30 07:22:38] zorast : On Mini3Pro u can change a lot. U can also change the max tilt about 5 degree too! The A2s are not much faster as the Mini3 then! I was very disappointing when i see how much the A2s drain battery in far distance Flights compare with the M3P. The smaller Drone train his Battery much more less.. Probably in Small range about 0-500m u will not see a much difference.

[2022-06-30 07:22:38] zorast : On Mini3Pro u can change a lot. U can also change the max tilt about 5 degree too! The A2s are not much faster as the Mini3 then! I was very disappointing when i see how much the A2s drain battery in far distance Flights compare with the M3P. The smaller Drone train his Battery much more less.. Probably in small ranges about 0-500m u will not see a much difference.

[2022-06-30 07:22:38] zorast : On Mini3Pro u can change a lot. U can also change the max tilt about 5 degree too! The A2s are not much faster as the Mini3 then! I was very disappointing when i see how much the A2s drain battery in far distance Flights about 500m to 2km compare with the M3P. The smaller Drone train his Battery much more less.. Probably in small ranges about 0-500m u will not see a much difference, but flight the Drone in far distances from spot to spot u will better use the Mini3P. Can not compare with the M3, still not have one :/

[2022-06-30 07:27:26] zorast : This much Warnings does really frustrating, it pop up so much that it is a safety risk in my opinion. Because u have to tap on them to disable it and this does make the situation in flight more risky when u left the sticks or u are probably record in this time a video it ruins ure shot like @fredmicrowave say...

[2022-06-30 07:27:26] zorast : This much Warnings does really frustrating, it pop up so much that it a safety risk in my opinion. Because u have to tap on them to disable it and this does make the situation in flight more risky when u left the sticks or u are probably record in this time a video...

[2022-06-30 07:27:26] zorast : This much Warnings does really frustrating, it pop up so much that it a safety risk in my opinion. Because u have to tap on them to disable it and this does make the situation in flight more risky when u left the sticks or u are probably record in this time a video it ruins ure shot...

[2022-06-30 07:27:26] zorast : This much Warnings does really frustrating, it pop up so much that it a safety risk in my opinion. Because u have to tap on them to disable it and this does make the situation in flight more risky when u left the sticks or u are probably record in this time a video it ruins ure shot like @fredmicrowave say...

[2022-06-30 07:48:24] airsheen : yeah, plus you get alarm fatigue. High wind warning is the same color and warning level as something actually immediately dangerous like a propeller falling off or losing avionics

[2022-06-30 07:52:59] airsheen : The absolute worst in my opinion is the aircraft binding status thing. Having to connect to the internet every time you switch mobile devices just to fly is ridiculous. The binding only applies if you fly in China, the firmware should at least check the GPS coordinates and not do it if you're not flying over there. I set my mini SE down for a few minutes in a fenced off area while I was changing settings and then couldn't take off again because of it :skull_and_crossbones:

[2022-06-30 16:26:50] quad808 : parameter discussions should be moved to parameter_settings channel. Lets keep this discussion here about Drone-Hacks please

[2022-06-30 17:34:16] zorast : yes did see it

[2022-07-05 16:59:46] quad808 : Attention: Mavic Air2 firmware just released 01.01.920 with a higher ARB value....DO NOT UPGRADE TO THIS FIRMWARE. DJI is getting very aggressive with their firmware, doing all sorts of things to prevent any downgrading, so please spread the word about upgrading firmware for any drones. Currently DH supports downgrading Air2 (01.01.820) and Air2s (02.04.2190) but no higher.

[2022-07-05 17:02:53] quad808 : This is always a cat and mouse game with DJI.

[2022-07-08 05:50:06] anthony : anthony joined the channel.

[2022-07-10 01:46:30] airsheen : New firmware for mini SE as well. Probably increases the antirollback value

[2022-07-10 12:59:58] emeraldmaster : Hi, I've got 4 mavic 2 zoom drones on latest firmware, and DH failed to enable FCC on all of them for some reason.. NFZ certificate installed with no errors. Does anybody know what can be wrong?

[2022-07-11 07:59:56] infinitydrones : whenever i see this, i restart the drone and app.

[2022-07-11 08:14:29] emeraldmaster : that's what I do, but the app continues to tell me ```False FCC flag enable failed```

[2022-07-11 17:16:44] quad808 : Open a support ticket

[2022-07-11 17:17:22] anesta : anesta joined the channel.

[2022-07-12 08:55:51] sambuko : Does anybody try to hack air2s on 02.04.2190? Or dronehack support only 02.04.2040?

[2022-07-12 14:36:02] sparkyws : Check the birdmap

[2022-07-12 17:40:44] il1oo0 : I've tried,absolutely not ):

[2022-07-12 17:41:09] il1oo0 : I've tried,absolutely not ):

[2022-07-15 16:08:33] xou : xou joined the channel.

[2022-07-17 14:44:35] dereksynkopa : Does the dh-win 1.26 program support firmware upload to the mini 3 pro drone? Has someone succeeded in upgrading?

[2022-07-18 14:08:34] flymymavic : Where has the mini 2 fcc mode gone in 1.26

[2022-07-18 19:35:55] vlad666 : vlad666 joined the channel.

[2022-07-18 19:52:46] zorast : https://drone-hacks.com/blog/post/722

[2022-07-18 23:55:36] hito_no_yume : yutasyutas joined the channel.

[2022-07-19 07:37:14] dereksynkopa : I know the program and methods. The problem is that this failed with the mini 3 pro. Have you succeeded?

[2022-07-19 07:37:14] dereksynkopa : I hope it will happen soon. Thanks.

[2022-07-25 16:53:17] quad808 : ooohhhh....looky, looky...what do I spy?

[2022-07-25 16:53:37] quad808 : https://drone-hacks.com/#news

[2022-07-25 18:41:18] dereksynkopa : Thank you to the entire DH-C team for all your great work. You're not going to stop there, are you?

[2022-07-26 06:09:14] oakley75 : Curious, is running DH on Win10 or on Linux the top preferable choice?

[2022-07-26 07:03:40] zorast : UHHHHHH

[2022-07-26 07:03:40] zorast : UHHHHHH FCC on RC Pro :D

[2022-07-26 07:03:40] zorast : UHHHHHH FCC on RC Pro :D So if the Mini 3 going to be compatible with the RC Pro we have finally FCC working on M3P

[2022-07-26 08:54:08] cs2000 : Windows 10 :) (or 11, works on there too)

[2022-07-26 12:44:59] dereksynkopa : At this time, you can use fcc on rc rm330. However, you need to connect via rc-n1 early and run DH-C on your smartphone. Without turning off the drone, the fcc hack will stay in cooperation with the rm330 after re-pairing.

[2022-07-27 11:45:15] robertosmera : Trying to flash my RC Pro to 03.01.0012 and the progress is stuck at 80% for several minutes. Is that normal?

[2022-07-27 12:09:37] robertosmera : Something went very wrong. Build number shows 03.01.00.12 on RC Pro but now DJI Fly won't open. Everytime I try to launch it crashes immediately. I also have some strange chinese apps installed.

[2022-07-27 13:15:45] robertosmera : All is well now. My bad I didn't read the instructions fully. Even so, the flash progress did not completed to 100% either in version 03.01.00.12 or 03.01.00.80.

[2022-07-27 21:26:45] viiince : viiince joined the channel.

[2022-07-29 20:52:11] dereksynkopa : Some questions have gathered ... FCC Hack in fpv dji drone, is permanently and always on, can it be turned on or off like in mini 2? Except that fpv raicer does not have an additional button. So how do I switch CE mode to FCC?

[2022-07-29 23:18:55] speatuk : It’s permanent and can’t be switched.

[2022-07-30 08:06:47] nospam2000 : nospam2000 joined the channel.

[2022-07-30 11:50:58] eddy : Can you please confirm if firmware 01.01.0300 for DJI RC (rm330) still has ARB = 0 ?

[2022-07-30 14:04:26] marebine75 : marebine75 joined the channel.

[2022-07-30 17:44:04] dereksynkopa : Yes, it is. <dji> <device id="rm330"> <firmware formal="01.01.0300"> <release version="01.01.0300" antirollback="0" antirollback_ext="cn:0" enforce="0" enforce_ext="cn:0" enforce_time="2022-07-21T09:06:48+00:00" from="2022/07/21" expire="2023/07/21"> <module id="1400" version="10.00.01.09" type="" group="rc" order="0" wait="0" size="1202464" name="SPARROW_GND" upgrade_order="3" is_upgrade_center="false" op_lib_name="libsparrow_noemmc_md_up.so" com_method="V1" com_prama1="0x0e00" com_prama2="null" sec_type="normal" only_check_ver="false" loader_needed="false" post_reset="false" post_check_ver="false" reboot_after_fail="false" reboot_notify="false" resp_get_ver="true" support_multi_hw="false" allow_skip="false" delay_after_1_pkg_us="0" delay_after_a_cmd_s="0" fail_repeat="2" sound_file="null" get_version_to="null" get_version_dt="null" request_upgrade_to="null" request_upgrade_dt="null" check_status_to="null" check_status_dt="null" request_accept_data_to="null" request_accept_data_dt="null" transfer_data_to="null" transfer_data_dt="null" transfer_complete_to="null" transfer_complete_dt="null" reboot_to="null" reboot_dt="null" wait_status_report_time="null" wait_status_report_time_total="null" md5_unsign="34dee588cd9721a7a73f79d93645d131" md5="fced5f59ee8c0e6e2e1bbdd0986c2fdd">rm330_1400_v10.00.01.09_20220706.pro.fw.sig</module> <module id="0600" version="01.00.02.89" type="" group="rc" order="0" wait="0" size="43264" name="RC_MCU" upgrade_order="2" is_upgrade_center="false" op_lib_name="libstandard_md_up.so" com_method="V1" com_prama1="0x0600" com_prama2="null" sec_type="normal" only_check_ver="false" loader_needed="true" post_reset="true" post_check_ver="true" reboot_after_fail="true" reboot_notify="false" resp_get_ver="true" support_multi_hw="false" allow_skip="false" delay_after_1_pkg_us="0" delay_after_a_cmd_s="0" fail_repeat="2" sound_file="null" get_version_to="null" get_version_dt="null" request_upgrade_to="null" request_upgrade_dt="null" check_status_to="null" check_status_dt="null" request_accept_data_to="null" request_accept_data_dt="null" transfer_data_to="null" transfer_data_dt="null" transfer_complete_to="null" transfer_complete_dt="null" reboot_to="null" reboot_dt="null" wait_status_report_time="null" wait_status_report_time_total="null" md5_unsign="9b01b99d0cd6c3e0a52d76f6059814d9" md5="2147bdd69969bfc32265cd44c1cd23e6">rm330_0600_v01.00.02.89_20220708.pro.fw.sig</module> <module id="0205" version="00.03.02.22" type="" group="rc" order="0" wait="0" size="890040064" name="sys_app" upgrade_order="1" is_upgrade_center="true" op_lib_name="librecovery_md_up.so" com_method="V1" com_prama1="0x0205" com_prama2="null" sec_type="secure" only_check_ver="false" loader_needed="false" post_reset="false" post_check_ver="true" reboot_after_fail="false" reboot_notify="true" resp_get_ver="true" support_multi_hw="false" allow_skip="false" delay_after_1_pkg_us="0" delay_after_a_cmd_s="0" fail_repeat="0" sound_file="null" get_version_to="null" get_version_dt="null" request_upgrade_to="null" request_upgrade_dt="null" check_status_to="null" check_status_dt="null" request_accept_data_to="null" request_accept_data_dt="null" transfer_data_to="null" transfer_data_dt="null" transfer_complete_to="null" transfer_complete_dt="null" reboot_to="null" reboot_dt="null" wait_status_report_time="null" wait_status_report_time_total="null" md5_unsign="dc9231c2c1399d8a21e60f2c0dedec03" md5="f7e660abadc4d5f465943196f7e39b42">rm330_0205_v00.03.02.22_20220721.pro.fw.sig</module> </release> </firmware> </device> </dji>

[2022-07-30 17:44:04] dereksynkopa : Yes, it is. <dji> <device id="rm330"> <firmware formal="01.01.0300"> <release version="01.01.0300" antirollback="0" antirollback_ext="cn:0" enforce="0" enforce_ext="cn:0" enforce_time="2022-07-21T09:06:48+00:00" from="2022/07/21" expire="2023/07/21"> <module id="1400" version="10.00.01.09" type="" group="rc" order="0" wait="0" size="1202464" name="SPARROW_GND" upgrade_order="3" is_upgrade_center="false" md5_unsign="34dee588cd9721a7a73f79d93645d131" md5="fced5f59ee8c0e6e2e1bbdd0986c2fdd">rm330_1400_v10.00.01.09_20220706.pro.fw.sig</module> <module id="0600" version="01.00.02.89" type="" group="rc" order="0" wait="0" size="43264" name="RC_MCU" upgrade_order="2" is_upgrade_center="false" md5="2147bdd69969bfc32265cd44c1cd23e6">rm330_0600_v01.00.02.89_20220708.pro.fw.sig</module> <module id="0205" version="00.03.02.22" type="" group="rc" order="0" wait="0" size="890040064" name="sys_app" upgrade_order="1" is_upgrade_center="true" md5="f7e660abadc4d5f465943196f7e39b42">rm330_0205_v00.03.02.22_20220721.pro.fw.sig</module>

[2022-07-30 18:35:18] eddy : thanks @dereksynkopa

[2022-08-03 12:40:09] robertosmera : Does anyone know if Air 2s firmware 02.04.2040 can connect with the new RC Pro? I was unable to pair my Air 2S yesterday with the controller. Thanks in advance.

[2022-08-04 06:35:45] zorast : Yes it does, i use them! U have to enable RC Pro compatibility on Dronehacks Windows APP to the Drone!

[2022-08-04 14:20:25] windoze : Is DH still trying to figure out how to root the RM500 and make it an option, or has that been given up on? I would like to see it as option if possible.

[2022-08-07 20:26:53] opb86199jeocecom : opb86199jeocecom joined the channel.

[2022-08-10 08:30:49] aaaawesome : aaaawesome joined the channel.

[2022-08-15 22:24:53] robertosmera : Thank you, but how do I enable the RC Pro compatibility? Is there a parameter to change?

[2022-08-16 07:34:40] zorast : U have to go to hacks tab on Dronehacks App. Its not a Parameter that have to be enable it is a hack.

[2022-08-17 11:16:07] robertosmera : Hi zorast, there are only two options in the hacks tab, one is FCC Mode, which I already did and the other is Stock Mode, which I assume is to go back to the default signal mode. I can't seem to find the compatibility mode you're refering to. Could you please be more specific? Thank you again.

[2022-08-17 11:16:07] robertosmera : Hi zorast, there ara only two options in the hacks tab, one is FCC Mode, which I already did and the other is Stock Mode, which I assume is to go back to the default signal mode. I can't seem to find the compatibility mode you're refering to. Could you please be more specific? Thank you again.

[2022-08-18 07:04:20] dronedavid : dronedavid joined the channel.

[2022-08-18 11:40:20] robertosmera : Don't bother. I was searching the hack in RC Pro Drone-Hacks Menu. The RC Pro compatibility is on the Air 2S Hacks menu. All sorted now.

[2022-08-18 13:28:40] zorast : Yes its on A2s Menu !!

[2022-08-19 09:29:09] mgroberman : mgroberman joined the channel.

[2022-08-22 12:05:43] robertosmera : Anyone knows if is safe to update to the latest RC Pro firmware v03.01.0900?

[2022-08-22 15:34:15] fredmicrowave : At some point you lose the option to disable Aeroscope , but rn I cant remember from what version and IDK if it makes any effective difference.

[2022-08-22 17:41:17] quad808 : Anytime you have new firmware, you have to ask yourself....are there features I need vs what I know Drone-Hacks can do on the current firmware I am on? If its working fine, why upgrade and run the risk of either losing current hacks or possible future hacks??

[2022-08-23 09:59:42] zorast : https://dl.djicdn.com/downloads/DJI_RC_Pro/20220817RN/DJI_RC_Pro_Release_Notes_EN_20220817.pdf Thats amazing, now Mini 3 Pro is supported !!!

[2022-08-23 09:59:42] zorast : https://dl.djicdn.com/downloads/DJI_RC_Pro/20220817RN/DJI_RC_Pro_Release_Notes_EN_20220817.pdf Thats amazing, now Mini 3 Pro is supported !!! And FPV Live !!! I think goggle v2 has also be updated to version which support DJI FPV: https://dl.djicdn.com/downloads/DJI_Digital_FPV_System/20210727/DJI_Digital_FPV_System_Release_Notes_EN.pdf

[2022-08-23 09:59:42] zorast : https://dl.djicdn.com/downloads/DJI_RC_Pro/20220817RN/DJI_RC_Pro_Release_Notes_EN_20220817.pdf Thats amazing, now Mini 3 Pro is supported !!! And FPV Live !!!

[2022-08-23 14:47:14] fredmicrowave : Funny how every single new version contain "important updates. It is recommended to update the remote controller" but fixed bugs are always minor :smile:

[2022-08-23 20:15:46] infinitydrones : I have and it is working :)

[2022-08-23 20:18:12] infinitydrones : https://www.youtube.com/watch?v=rYJ2BDpPRtE&lc=Ugy46Xmq6hGSyNyy-nZ4AaABAg I've used .0900 as well and can confirm its working :)

[2022-08-23 21:01:33] quad808 : Thanks my man @infinitydrones ! Yep, .0900 works fine, and we have updated DH to reflect this.

[2022-08-24 12:09:06] robertosmera : Saw your tutorial yesterday and upgraded to .0900 few minutes ago here in my office. Thank you.

[2022-08-24 16:13:11] zorast : Just install the hack and its working on .9000 BUT DH does Stuck on 85% on Firmware Flash, but the Firmware are Running correctly, I think its only a bug in DH 1.27

[2022-08-25 10:58:06] zorast : https://www.youtube.com/watch?v=TsuQi5J_SbA

[2022-08-25 10:58:44] zorast : Have to test this too, seem its enable DJI FPV Flying at all with RC PRO

[2022-08-25 12:19:05] robertosmera : Does it also enable FPV mode with DJI Mini 3 Pro?

[2022-08-25 12:21:01] robertosmera : Yes, same occured to me. Just close and open DH application and the process will be finished.

[2022-08-26 07:02:54] zorast : I did what a while and then disconnect the RC Pro and it works great. Don't now what they do after 83% but it is not important for the function. FCC works on Mini3P

[2022-08-26 07:03:07] zorast : Hopefully yes, I have to test this but don't have time for that next weeks.

[2022-08-26 07:03:07] zorast : Yes I have to test this.

[2022-08-26 08:13:44] loaderbull : It’s been mentioned before, DJI’s flashing process sucks and the third party apps only use that same process. Nothing to do with a DH bug etc. as has been said, if it seems stuck, close app, reload it, but do not turn off the device. Then check current firmware to see if it did indeed flash ok.

[2022-08-30 20:49:35] hazardc : really confused here -- i never updated the firmware. DJI go tried to force me to and i unplugged immediately (i wanted the video out)

[2022-08-30 20:49:57] hazardc : It's been on this FW since i bought it and not quite sure how antirollback got to "2"

[2022-08-30 20:51:31] oakley75 : Since your device seems to be online, never trust DJI not to sneak in something. If you are android, you can run an open-source no-root firewall like NetGuard. Or even better, use a dedicated offline device.

[2022-08-30 20:54:04] hazardc : i was trying to use dji fly in airplane mode ffs :/

[2022-08-30 20:54:26] hazardc : so now the only firmare i can switch to if i want to switch at all is .15 eh

[2022-08-30 20:55:36] hazardc : that screenshot was from dronehacks app btw not dji anything

[2022-08-30 21:02:05] oakley75 : Maybe check your special permissions, some apps can override and control wifi etc. Just a suggestion. If you're iOS, I can't help

[2022-08-30 21:02:39] hazardc : no apple stuff ehre

[2022-08-30 23:17:23] quad808 : Here is the deal with DJI FLY. Unless you firewall it ALL THE TIME, it connects to DJI. Yes, even in the background. Users think that oh....I just need to connect to get maps etc, then when I fly I will just be in airplane mode. Well....FLY and GO talk to DJI, which then sends the latest firmware checks back to your device. Then you end up in a situation that you are in. Does it suck? Yes it does. Get a firewall app as @oakley75 suggests and don't allow access at all, or dedicated device that never sees the internet. Extreme measures? Well...if you want to keep things in a state where you can enjoy your drones without big brother DJI getting involved, yes, you must do these things. Luckily in your case even if you get stuck upgrading to .015 on the FPV drone, DH has your back and you can downgrade again and apply hacks...yes, it will cost you for a license, but at least its possible. DJI is unethical and sneaky IMHO trying to do everything to protect their interests, not yours. These are my opinions and not necessarily Drone-Hacks, but I stand by them.

[2022-08-31 03:05:13] hazardc : Eh, twist of fate, and not even a bullshit story -- took the thing into best buy tonight because i was already picking up a couple things at the grocery store and was going to rip through a few batteries on the fpv before the sun went down -- -the battery pack to the goggles took somewhere between here and there.. just stopped responding maybe two-lights flashing.. wouldn't charge on any charger..

[2022-08-31 03:06:13] hazardc : and they even let me keep the extra fucking batterybecause thing is just going to be sent to recycleers

[2022-08-31 03:07:10] hazardc : so now i have 4 batteries and ... better firmware

[2022-08-31 12:48:56] cs2000 : A little birdy has just told me that the new DJI Avata is now supported in DH with the release of V1.28 The drone can sometimes be a little strange, maybe early FW release stuff, but if you have problems connecting it to DH's desktop app, try fully powering off and on the drone before you connect it to your PC.

[2022-08-31 13:25:40] kilrah : only issue i've had is just flaky connection on the *ç%&% USB port lol

[2022-09-01 13:13:56] dereksynkopa : Antirolbak 2 in firmware 1.2.0000 is created after someone previously upgrades to 1.2.015, and then applies the firmware from DH 1.2.0014 with an exploit, which for a moment will cheat the security in the drone and allow you to downgrade to any version with AB1. After a while, however, AB2 reappears and a downgrade is no longer possible. This is how this exploit works. Haven't you bought a second hand drone, or on sale with returns? Do not worry. Buy a DH license and you will be able to downgrade the firmware as you want. However, AB2 will remain forever.

[2022-09-01 13:13:56] dereksynkopa : Antirolbak 2 in firmware 1.2.0000 is created after someone previously upgrades to 1.2.015, and then applies the firmware from DH 1.2.0014 with an exploit, which for a moment will cheat the security in the drone and allow you to downgrade to any version from AB1. After a while, however, AB2 reappears and a downgrade is no longer possible. Haven't you bought a second hand drone, or on sale with returns? Do not worry. Buy a DH license and you will be able to downgrade the firmware as you want.

[2022-09-01 13:13:56] dereksynkopa : Antirolbak 2 in firmware 1.2.0000 is created after someone previously upgrades to 1.2.015, and then applies the firmware from DH 1.2.0014 with an exploit, which for a moment will cheat the security in the drone and allow you to downgrade to any version with AB1. After a while, however, AB2 reappears and a downgrade is no longer possible. This is how this exploit works. Haven't you bought a second hand drone, or on sale with returns? Do not worry. Buy a DH license and you will be able to downgrade the firmware as you want.

[2022-09-01 13:48:28] cs2000 : This is correct. Actually as far as i know, forcibly using ARB#1 when its already been set at 2 will cause the drone to have issues. Its temporarily set and then removed to trick the downgrade

[2022-09-01 16:27:37] dereksynkopa : I have problems with this version. It doesn't want to detect the drone, while version 1.27 works fine.

[2022-09-01 16:28:03] dereksynkopa : I have problems with this version. It doesn't want to detect the drone, while version 1.27 works fine.

[2022-09-01 17:08:08] quad808 : Connection issues should be fixed with the updated release 1.29

[2022-09-01 20:47:39] dereksynkopa : Oh yeah, it's better now.

[2022-09-02 21:43:01] quad808 : Just an update and info about the AVATA and FCC....we have updated the procedure here: https://drone-hacks.com/dh-companion, scroll to find the AVATA procedure.

[2022-09-02 21:43:01] quad808 : Just an update and info about the AVATA, and FPV drones, as well as general FCC info, using the DH Companion app for Android. The AVATA and FPV drone, because you can use them without DJI FLY.....you get a semi-Perm FCC mode using DH Companion after you enable FCC mode, which survives a restart. BUT...if you then use DJI FLY, it will undo the hack and back to CE mode you go. You then would need to run DH Companion AGAIN, and then NOT switch back to DJI FLY, 'cause this will reset again. The issue is DJI FLY resets FCC mode back to CE on these drones. Of course the FPV drone can enable a perm FCC, using the DH Application, but not the AVATA. The other supported drones.....you have to do the DJI FLY/DH Companion dance on every boot up, unless perm is supported in firmware. Hope this helps!

[2022-09-02 21:43:01] quad808 : Just an update and info about the AVATA, and FPV drones, as well as general FCC info, using the DH Companion app for Android. The AVATA and FPV drone, because you can use them without DJI FLY.....you get a semi-Perm FCC mode using DH Companion after you enable FCC mode, which survives a restart. BUT...if you then use DJI FLY, it will undo the hack and back to CE mode you go. You then would need to run DH Companion AGAIN, and then NOT switch back to DJI FLY, 'cause this will reset again. The issue is DJI FLY resets FCC mode back to CE on these drones. Of course the FPV drone can enable a perm FCC, using the DH Application, but not the AVATA. The other supported drones.....you have to do the DJI FLY/DH Companion dance on every boot up, unless perm is supported in firmware. Hope this helps! We are finding that the AVATA, at least some from reports, will reset FCC mode once you get GPS...so if you find yourself in that situation, just run DH Companion again to get FCC mode back on there, then fly. Just don't switch back to DJI FLY.

[2022-09-02 22:13:40] kilrah : The "Virtual Flight" simulator seems to reset as well, didn't investigate deeply but had weird stuff after using it - good to keep in mind if you want to use that between flights

[2022-09-02 22:13:40] kilrah : The "Virtual Flight" simulator seems to reset as well, didn't investigate deeply but had weird stuff after using it

[2022-09-03 21:07:43] dereksynkopa : I think I have the answer: The FPV cannot use MANUAL mode if you fly over borders of AUTHORIZATION ZONE, ENHANCED WARNING ZONES, NFZ etc., sometimes even inside of this Zones. Manual mode works in all other situations without a problem, only in some situations the drone might refuse to use it. It seems like this is a firmware bug from DJI, nothing we can do about it!

[2022-09-04 11:47:24] mad_angler1 : Nice to see this done I’ll mention this tonight on the live stream that you guys have it

[2022-09-04 11:47:38] mad_angler1 : Iv seen the French one but been wishing for yours tbh

[2022-09-04 11:55:43] kilrah : it's been found that the avata will reset to CE once a homepoint is acquired, unfortunately requiring the hack to be reapplied for every flight after HP has been set.

[2022-09-04 11:55:43] kilrah : it's now been found that the avata will reset to CE once a homepoint is acquired, unfortunately requiring the hack to be reapplied for every flight after HP has been set.

[2022-09-04 16:39:22] mad_angler1 : That’s good to know. Shame as a little messy to use but it’s an option for folks.

[2022-09-04 17:02:07] d3vl_jack : d3vl_jack joined the channel.

[2022-09-04 17:57:30] daneel : daneel joined the channel.

[2022-09-04 19:10:08] daneel : That will probably be a considerable hassle given the USB port placement on the Avata :-/

[2022-09-04 19:10:35] kilrah : nope, phone connects to goggles, not aircraft

[2022-09-04 19:10:35] kilrah : mope, phone connects to goggle, not aircraft

[2022-09-04 19:10:35] kilrah : mope, phone connects to goggle, not aircraftn

[2022-09-04 19:10:35] kilrah : nope, phone connects to goggle, not aircraft

[2022-09-04 19:11:04] daneel : Ah, gotcha! That's ok then.

[2022-09-04 19:11:04] daneel : Ah, gotcha! That's ok then. Port there is very accessable.

[2022-09-04 19:11:26] daneel : Thanks for clearing that up.

[2022-09-05 04:31:34] hazardc : 1.29 doesn't let me flash the v2 goggles -- have to use 1.27

[2022-09-05 12:47:26] infinitydrones : literally brought out a video about 1.27 last week haha and we upto 1.29

[2022-09-05 12:47:43] infinitydrones : glad to see the support comming - the devs are doing awesome work

[2022-09-06 09:33:28] trulala69 : Has someone tested this FPV FCC hack already? https://b3yond.d3vl.com/

[2022-09-06 10:32:40] sambuko : Hi everyone. Is there any problem with using dji fly (on monile phone)after hacking dji fpv racer in donehack?

[2022-09-06 10:52:17] sambuko : I mean using the phone connected to the glasses during the flight

[2022-09-06 10:54:03] kilrah : if you did the hack on the drone itself with the PC app it's fine

[2022-09-06 11:00:04] sambuko : Ok thanks. just someone said that the dji fly app will not work with the helmet after hacking

[2022-09-06 11:02:05] sambuko : maybe there is no compatibility of the 01.02.0000 firmware with the new dji fly version :thinking_face:

[2022-09-07 17:06:28] arifyn : arifyn joined the channel.

[2022-09-13 03:49:06] nmikus : nmikus joined the channel.

[2022-09-13 23:05:48] skynet : skynet joined the channel.

[2022-09-14 13:51:28] jp911 : jp911 joined the channel.

[2022-09-15 12:51:38] urca87 : urca87 joined the channel.

[2022-09-17 08:14:27] tommiboost : Fcc available for the mini 3 pro rc yet?

[2022-09-17 08:17:36] d95gas : Yes but through the DH App and with the older N1 controller. Not available yet for the new controller unfortunately.

[2022-09-17 08:24:04] tommiboost : I've seen this on YouTube is it legit https://youtu.be/CH5g6ZToeSk

[2022-09-17 08:26:18] d95gas : There are others who are doing things, but its the level of trust you have with an unknown. The guys here are spot on, and trust them and their applications.

[2022-09-17 08:28:23] tommiboost : Yes I wouldn't use anyone other than dronehacks just thought I'd share it to see if they new about it or have anything coming up?

[2022-09-17 08:29:52] d95gas : We have been talking about this guy on another site. WIXSITE, all in capitals and using GMail address. never heard of him previously not sure whether to trust.

[2022-09-17 08:32:33] d95gas : I am sure if these guys are managing to hack the new controller, it wont be long before Drone-Hacks brings something out, I really hope so.

[2022-09-17 08:35:07] tommiboost : Yes if dronehacks manage to do this it will make a big difference to the mini 3 ?

[2022-09-17 10:54:50] d95gas : Apparently this guy is collaborating with Sincoder on this package, but no evidence of that at the moment.

[2022-09-17 10:55:33] speatuk : Just spoken to Sincoder. He says the software is his and he sells the guy the licence codes

[2022-09-17 10:57:21] d95gas : Ok thats cool. The guy has hike the cost up a good bit, so would rather go through Sincoder

[2022-09-17 16:44:57] kimdongwook : kimdongwook joined the channel.

[2022-09-17 21:35:53] quad808 : DH has FCC mode on the RC pro for a while now. https://drone-hacks.com/#news

[2022-09-18 05:05:43] tommiboost : Rc pro or the mini 3 rc?

[2022-09-18 08:31:41] d95gas : RC Pro - Dont think anyone has found the ability to sideload on the Mini 3 Pro RC as of yet. Would be great though to have the DH App on that controller :smile:

[2022-09-18 08:33:49] kilrah : the point is precisely that the video/method above supposedly does work for the RC "not-pro", which DH doesn't support

[2022-09-18 08:33:49] kilrah : the point is precisely that the video/method above supposedly does work for the RC "not-pro", which DH doesn't have

[2022-09-18 10:43:48] tommiboost : Yes it supposedly does just prefer to do the mod through drone-hacks

[2022-09-19 11:43:42] johnny : Any encryption keys available for DJI M30 or M300?

[2022-09-20 20:11:58] quad808 : some changes were made to our Birdmap, hopefully a little easier to see what can be done for each firmware. https://drone-hacks.com/birdmap

[2022-09-21 08:37:49] cs2000 : Looks great! hopefully it makes sense to people as to what hack does what and what features are supported on each drone/FW combo.

[2022-09-21 09:10:35] loveyou : Hi, upgrade Air2S to 02.04.2190 or stay to 02.04.2040?

[2022-09-21 09:22:00] kilrah : see page above, that's what it's for

[2022-09-21 09:28:34] infinitydrones : Never update your firmware unless you REALLY REALLY need to @loveyou

[2022-09-21 09:29:25] infinitydrones : Does anyone know if DroneHacks supports downgrading the DJI FPV drone from 1.03.0000 to 1.02.0000? The Birdmap does not show this new firmware version yet.

[2022-09-21 11:43:04] cs2000 : Cant confirm, but likely it can. The current supported FW all looks to be ARB#1, 01.02.0015 is an odd one as its ARB#2 and then 01.02.0020 reverts back to arb#1. 01.03.0000 is ARB#2

[2022-09-21 11:54:26] infinitydrones : Okay I'll try and test

[2022-09-22 08:44:33] sambuko : Is there any firmware for donehacks which can help to removing 40011 error on mavic air2s?

[2022-09-26 01:13:26] jackmax : jackmax joined the channel.

[2022-09-26 15:05:23] sambuko : Please help. I have problem with mavic pro

[2022-09-26 15:05:23] sambuko : Please help. I have problem with mavic pro and drone hack

[2022-09-26 15:06:39] sambuko : I wanted remove nfz on last firmware(.500). But drone hack cant flash custom firmware to drone. And show error on app

[2022-09-26 15:09:31] sambuko : even after a few attempts, drone starded beep beep. but fortunately i can recover it by dumloader

[2022-09-26 17:35:30] quad808 : open a support ticket

[2022-09-27 08:48:16] herr.frei : herr.frei joined the channel.

[2022-09-28 06:27:41] infinitydrones : What error are you seeing? I my experience simply closing the app and disconnecting and reconnecting fixes 90% of issues.

[2022-09-28 17:54:27] zorast : Yes it works nice !

[2022-09-28 19:49:15] mainframe : Confirming, RC Pro patching worked nicely with DH 1.29 :)

[2022-09-28 19:49:15] mainframe : Confirming, RC Pro patching worked nicely with DH 1.29 - gaining persistent FCC mode for mini3pro and m3 :)

[2022-09-29 14:51:54] monkeyman : cannot detect rc pro on my computer

[2022-09-30 15:11:15] joshgfpv : joshgfpv joined the channel.

[2022-09-30 15:14:26] joshgfpv : Hello, I am having issues with an Avata on 1.01.02.00 and the Dronehacks windows 10 v 1.29 app. I have tried powering on and connecting in various ways to get around the problem, but still not getting the avata picked up by the app. FPV drone is connecting as normal :) Cheers

[2022-09-30 15:14:58] speatuk : Try a different cable

[2022-09-30 15:17:19] joshgfpv : I will try some more, but all the ones that arent working, work with the FPV

[2022-09-30 15:18:46] speatuk : I had this problem with my Mini 3 Pro. I tried 4 cables before it would connect. But all four cables worked with all the other drones. I have no idea why. Good luck

[2022-09-30 15:29:03] joshgfpv : If its an isolated problem I will have to try figure it out from my end. Perhaps a driver issue affects these new breeds of DJI drone..? I have tried 4 different leads now, I don't have any more to check lol!

[2022-09-30 15:30:46] joshgfpv : Ahhh... this may be the reason

[2022-09-30 15:37:26] joshgfpv : reinstalling assistant 2 from advice!

[2022-09-30 17:45:32] speatuk : Connected my DJI FPV to the DH windows application today. 1.27 said the anti rollback was 2. Downloaded the 1.29 version and the anti rollback said 1. Anyone have any idea why?

[2022-09-30 17:56:50] speatuk : Sorry firmware 01.02.0000

[2022-10-01 16:51:30] mavicquax : mavicquax joined the channel.

[2022-10-01 18:27:27] quad808 : firmware 01.02.0000 ARB is 1

[2022-10-07 13:38:42] cr : kie joined the channel.

[2022-10-07 13:39:10] cr : hi who can help downgrade FW for DJI Mavic3?

[2022-10-07 17:01:35] quad808 : Guys....just a heads up. Drone-Hacks servers will be undergoing scheduled maintenance 11 OCT from 01:20am MESZ to 07:30am MESZ 11 OCT. Keep this in mind please. -- Thanks!

[2022-10-10 17:47:58] quad808 : Just another friendly reminder....Maintenance window is scheduled to start in about 6 hours or so, so DH will be unavailable. If all goes well, we should be up and running in no time!

[2022-10-11 08:19:13] fajo : fajo joined the channel.

[2022-10-15 01:28:10] richter08 : richter08 joined the channel.

[2022-10-17 14:43:37] konraditurbe : I have an air 2s on 02.04.1691 - safe to upgrade to .2040 using DH? For whatever reason DJI Assistant for consumer drones wanted me to upgrade to the latest firmware and didn't let me choose an earlier version

[2022-10-17 14:44:24] konraditurbe : Same anti rollback value yet it doesn't appear on the bird map.. weird.

[2022-10-17 16:03:35] konraditurbe : Got it working perfectly, flashed .2040 using DH it had no issue, off to remove russkies it goes.

[2022-10-17 21:27:37] cs2000 : Bird map can sometimes be a bit laggy as I guess each new FW has to be tested just incase DJI blocked some features of DH without the need for an ARB bump, it does happen from time to time, but generally the increase arb too

[2022-10-18 19:45:03] rameezahmed1998 : waiting for mavic 3 altitude hack. any idea how much time it will take?

[2022-10-27 06:52:10] zorast : DJI Mini 3 Firmware V01.00.0400

[2022-10-27 06:52:10] zorast : New DJI Mini 3 Firmware V01.00.0400

[2022-10-27 06:52:10] zorast : DJI Mini Firmware V01.00.0400

[2022-10-27 06:52:15] zorast : Any News about this ?

[2022-10-27 06:53:24] zorast :

[2022-10-27 06:58:43] crashing_bird : crashing_bird joined the channel.

[2022-10-27 13:49:46] vmonk : vmonk joined the channel.

[2022-10-29 17:17:53] bojangles : bojangles joined the channel.

[2022-11-03 15:23:10] zorast :

[2022-11-03 15:24:00] zorast :

[2022-11-03 15:28:20] zorast : RC Pro :

[2022-11-05 11:27:27] markco : markco joined the channel.

[2022-11-06 18:30:52] minime : minime joined the channel.

[2022-11-09 12:49:27] djifans : djifans joined the channel.

[2022-11-10 09:45:53] pingspike : is there an RSS feed hiding on the DH blog / web site anywhere guys?

[2022-11-10 09:46:15] pingspike : am I the only person left in the world that still uses rss :thinking_face:

[2022-11-10 10:06:03] cs2000 : Lol im sure you're not, but no i dont think there is

[2022-11-10 19:53:24] rameezahmed1998 : https://dji-rev.com/dji-rev/pl/nikfufzii3dp9jicb8bqitmxir

[2022-11-11 15:31:19] eseven : eseven joined the channel.

[2022-11-12 07:38:50] clungnor : clungnor joined the channel.

[2022-11-13 22:15:48] sambuko : I want to flash dji mini 2 , but have faild error. Not matter which firmware i will choose. Dji assistant Consumer can without any issues downgrade and refresh firmware. I tried several version of drone hack, but it didnt help

[2022-11-13 22:15:48] sambuko : I want to flash dji mini 2 , but have faild error. Not matter which firmware i will choose. Dji assistan Consumer can witout any issues downgrad and refresh firmware. I tried several cersion of drone hack, but it didnt help

[2022-11-15 13:16:34] areoc : Can anyone still open the software?

[2022-11-15 13:17:18] areoc : I tried many times, but I can’t open it anymore. The software version is 1.29. After opening, it prompts me that there is a connection error.

[2022-11-15 19:00:03] quad808 : Nothing wrong, working fine.

[2022-11-15 21:13:07] dereksynkopa : I have the same problem. Only version 1.27 works properly. It's probably a problem with the USB drivers.

[2022-11-21 08:59:12] infinitydrones : Working fine for me too, only issue I've had is the "not stable" flashing - where it seems the process has frozen, but in fact its still going on.

[2022-11-21 20:55:42] dereksynkopa : I did FCC signal tests on fpv raicer using RF meter tools. I can share my insights. Many FPV raicer users wonder how to check if the drone is actually working in FCC mode. There is no good way to check using the goggles menu. Information about the number of channels, especially after using the ham_cfg file, is not reliable and is unlikely to enable FCC mode. However, there is a way to check what mode the drone is operating in. If you use DHCompanion.apk. After connecting to the goggles and turning on the drone, the application will indicate the current mode. It works reliably, after I confirmed it with the RF meter. In addition, in firmware version 1.2.0000, the DHC app turns on the FCC permanently. In higher firmware versions, probably only temporarily. However, if the FCC is enabled using DH-Win.exe, the DHCompanion.apk app will read the currently enabled mode but will not be able to effectively disable it should you wish to disable it. FCC mode is permanently on. That's it, I hope someone finds it useful.

[2022-11-22 12:02:17] infinitydrones : fantastic news! thank you very much

[2022-11-30 07:00:04] infinitydrones : Just a friendly reminder for anyone to enter the competition: https://youtu.be/oR2mtUlX62w

[2022-11-30 07:00:19] infinitydrones : 10 licenses up for grabs :D

[2022-12-01 15:09:18] zorast : Did anyone has also issue with RC Pro(Firmware v03.01.0900 and DH) and Mini 3(latest Firmware)? The Propellers won't start..

[2022-12-03 14:19:38] rsrmdp :

[2022-12-03 14:19:54] rsrmdp : No rollback

[2022-12-04 15:08:42] cs2000 : Best to log a ticket with DH support mate

[2022-12-04 16:07:37] retrocall : retrocall joined the channel.

[2022-12-05 01:33:17] zy1004 : zy1004 joined the channel.

[2022-12-05 11:32:42] sambuko : does downgrading work from 2190 to 2040 via dronehack on air2s?

[2022-12-05 11:59:42] areoc : Sure

[2022-12-05 15:13:27] oxolot : oxolot joined the channel.

[2022-12-05 16:22:00] adinbied : adinbied joined the channel.

[2022-12-06 07:53:08] prettymuchathrowaway69 : prettymuchathrowaway69 joined the channel.

[2022-12-06 16:42:28] chengcheng : chengcheng joined the channel.

[2022-12-06 17:01:19] flymymavic : why doesnt the mini 3 show a port in device manager, is it using some other method of communication now, i see from DH log Drone Hacks - INFO - 30.05.11.01 is it using somekind of IP system now

[2022-12-06 17:08:01] buzzcam : buzzcam joined the channel.

[2022-12-06 19:31:57] uskve : uskve joined the channel.

[2022-12-06 23:45:05] infinitydrones : Yes I 've noticed it as well when I did my Drone Id video - the mini 3 and mavic 3 connect completely differently than other drones

[2022-12-07 00:15:00] nmikus : I think they use bulk usb

[2022-12-07 08:20:03] chengcheng : I want to make a donation, but China cannot donate PayPal, is there anything you can do?

[2022-12-07 08:47:44] areoc : I can help you

[2022-12-07 08:48:12] areoc : My wechat Michael613515

[2022-12-07 08:57:19] areoc : MINI3 and Mavic3 used bulk

[2022-12-07 08:57:27] areoc : Also DJI RC

[2022-12-07 19:32:39] flymymavic : Explain Bulk please

[2022-12-08 00:32:15] gershee : gershee joined the channel.

[2022-12-08 21:16:54] lukappaseidue : lukappaseidue joined the channel.

[2022-12-09 00:48:52] nocommie : nocommie joined the channel.

[2022-12-09 01:36:06] ivar : ivar joined the channel.

[2022-12-09 02:31:16] al96 : al96 joined the channel.

[2022-12-09 02:35:09] al96 : waiting for mavic 3 altitude hack. any idea how much time it will take?

[2022-12-09 11:14:16] efwefaf : efwefaf joined the channel.

[2022-12-09 16:08:03] kilrah : any chance we could get Avata / Goggles 2 flashing? With the current RID mess...

[2022-12-09 19:48:41] mr.twich : mr.twich joined the channel.

[2022-12-09 23:35:21] invender : invender joined the channel.

[2022-12-10 13:16:07] loulouki : loulouki joined the channel.

[2022-12-11 01:34:30] valiantroku : valiantroku joined the channel.

[2022-12-11 19:36:40] stanlee : Doesn’t look like dronehacks recognizes the m3 with the latest fw installed?

[2022-12-11 19:43:08] stanlee : Stuck on “searching for device”

[2022-12-12 13:24:24] sparkyws : Just tested mine and it connects fine

[2022-12-12 13:24:24] sparkyws : Just test mine and it connects fine

[2022-12-12 19:16:58] quad808 : any hacks that aren't currently supported in recent firmware or on models where its not available, will take as long as it takes. Obviously this isn't easy, or everyone would be doing it.

[2022-12-15 08:57:24] capg : capg joined the channel.

[2022-12-15 20:59:39] spudgy : spudgy joined the channel.

[2022-12-16 07:29:27] sparkyws : The latest fly app 1.9.0 is now supported ?

[2022-12-16 10:46:43] loveyou : Please update site for Air2S.

[2022-12-18 00:31:34] milenovic : milenovic joined the channel.

[2022-12-20 15:18:32] loveyou : Hi, Hacks working with Air2s firmware 02.04.25.00?

[2022-12-20 17:49:29] quad808 : If you don't see that firmware in the birdmap, its not supported. Always check there first.

[2022-12-22 08:04:24] fedosgad : fedosgad joined the channel.

[2022-12-23 17:32:56] mangelbg : mangelbg joined the channel.

[2022-12-24 20:06:37] freakmonk : freakmonk joined the channel.

[2022-12-25 02:37:27] quad808 : Hello to all our Drone-Hacks supporters and of course to everyone else here! Drone-Hacks wants to wish you and your families a very Merry Christmas and a Happy New Year! For a limited time we are running a special for licenses! Thank you for all your support, and lets hope 2023 brings all of us new hacks to look forward to! Thank you again for all your support for us. We really appreciate all of you! Happy Flying!! - from the Drone-Hacks crew

[2022-12-25 22:55:03] mr.twich : @mr.twich left the channel.

[2022-12-25 23:18:12] mr.twich : mr.twich joined the channel.

[2022-12-26 13:46:26] flymymavic : Hey guys has the p3p been pulled from the list, it was tested by Bin4ry a while back and worked, if it has which version of DH was it working with

[2022-12-26 17:20:43] pingspike : something we said? ??‍♂️

[2022-12-27 15:17:05] baxove : derowey joined the channel.

[2022-12-28 19:14:33] cantrepeat : Hey all, buddy just bought a DJI Mavic Air 2 S, hasn't gotten it in the mail yet. Is there a firmware I should be looking for? I did check out the birdmap and see 02.04.2040 is recommended. Is there any issues with downgrading the firmware on the bird should it not be the recommended?

[2022-12-28 20:07:47] cs2000 : Downgrades are possible but only from 02.04.2190 or lower :) anything higher and for now, you’re stuck !

[2022-12-28 20:12:23] cantrepeat : Thanks man, any idea when that firmware was published?

[2022-12-28 20:12:30] cantrepeat : or how long ago I guess

[2022-12-28 23:01:27] cantrepeat : Is there a way to tell which firmware might be on by the serial number on the box?

[2022-12-28 23:09:56] sambuko : maybe dealer can say, but if has activated. otherwise only dji....

[2022-12-28 23:20:14] cantrepeat : hasn't been turned on yet.

[2022-12-28 23:30:04] oakley75 : Tip: use DH to help not get a forced update upon activation

[2022-12-28 23:30:42] oakley75 :

[2022-12-29 08:49:16] cs2000 : It was around 6 months ago, mid June is when it appeared on my radar. Id **guess** the first retail drones with that FW version pre-loaded were out by mid July/early August time

[2022-12-31 21:00:38] trueandfalse : spartaksm99 joined the channel.

[2023-01-01 10:30:02] flowdrone : flowdrone joined the channel.

[2023-01-01 10:33:10] flowdrone : Hi everyone… I’m just wondering if Dronehacks will be putting out an FCC-unlocked firmware for the RM330 (A.K.A the DJI RC) controller anytime soon?

[2023-01-01 10:33:44] flowdrone : I can see there’s already a mod for the RC Pro controller… and I’m guessing this wouldn’t function on the RM330

[2023-01-01 11:00:29] flowdrone : Also, has anyone published a document of “signatures” for things like the RF modes? I am a software and hardware developer by trade, so if I have a jump start on what I’m looking for, I could probably modify the firmware for the RM330 myself (wouldn’t be my first time… modded many Nikon firmwares to add features that should have been part of them by design)

[2023-01-01 11:01:13] flowdrone : It does bother me that DJI have provided no standard way of overruling the FCC mode restriction in a geographic area. What about people with a legitimate license to use those bands and transmitter powers?

[2023-01-01 17:17:53] trueandfalse : @spartaksm99 left the channel.

[2023-01-01 20:47:29] fantom : fantom joined the channel.

[2023-01-04 06:11:52] kaleongo : kaleongo joined the channel.

[2023-01-04 19:19:37] gde : gde joined the channel.

[2023-01-05 21:38:03] grandman : grandman joined the channel.

[2023-01-06 14:44:15] baxove : Hello everyone. I've tried to increase the descent speed on DJI Mini 2 by changing the parameters for gentle mode, but it did not work. I've read some old post in this thread that changing the gentle parameters work but not for the vertical speeds. Has anyone been able to increase the horizontal speed by changing the tilt parameter in gentle mode?

[2023-01-07 08:23:18] tmbinc : vert_vel_down_adding_max is what limits it ultimately to -3.5m/s

[2023-01-07 08:23:52] tmbinc : I don't know what the permissions are to change that though, but range is -10m/s ..0, default -3.5m/s

[2023-01-07 08:24:30] tmbinc : but yeah you still need to use gentle, as vert_vel_down is limited to -3.5m/s in sport

[2023-01-07 08:25:01] tmbinc : (gentle is -10m/s max)

[2023-01-07 12:15:03] baxove : I've tried to set vert_vel_down_adding_max to -10 and mode_gentle_cfg_vert_vel_down to -8, the parameters stayed at those values but it did not increase the descent speed in gentle mode in my case. I hope it works to increase the horizontal speed at least. I can't test it now due to bad weather conditions. Has anyone tried the tilt in gentle mode and been able to increase horizontal speed?

[2023-01-07 16:32:23] baxove : I'm on firmware 01.03.0000 btw, I have never tried the earlier versions. Maybe they are not as limited as my current firmware?

[2023-01-07 18:33:03] oakley75 : I don't think the gentle mode descent trick works on the Mini 2 at all. Likely because it's so light, it's high-speed descent stability is not the best (especially if it were windy), and DJI put in that hard limit. And downgrading your firmware will not change anything I assure.

[2023-01-07 18:33:03] oakley75 : I don't think the gentle mode descent trick works on the Mini 2 at all. Likely because it's so light, it's high-speed descent stability is not the best (especially if it were windy), and DJI put in that hard limit.

[2023-01-07 19:05:17] quad808 : There are a lot of parameter settings, despite being able to change their values, they reset upon boot up by DJI design.

[2023-01-08 09:00:11] baxove : Thanks for the answers. I will not bother downgrading then. I've tried to change the gentle tilt parameter to 55° and it seems to stay at that value after next boot. I will try to fly later today if the weather gets better and hope that it can give me a little bit faster horizontal speed at least

[2023-01-08 09:15:34] tmbinc : Do the gentle parameters adjust at all?

[2023-01-08 09:15:41] tmbinc : I mean, are they effective at all?

[2023-01-08 09:16:42] tmbinc : Sorry, bad with words today. Did you check that a.) flight mode selection to gentle works, b.) changing gentle limits (let's say to something lower) works?

[2023-01-08 09:48:28] baxove : I have tried to change cine to gentle and adjusted the gentle vertical speed to 10 and -10. I got the same speed as in sport mode, so it seems that the selection to gentle works. I've read some old posts i this forum, and someone tried to set lower values in gentle and it flew slower. But I am not sure if the tilting in gentle will work or if it will stay at 40° as in sport mode

[2023-01-08 10:52:21] baxove : I tried to fly it now and unfortunately the horizontal speed was slower than in sport mode. Maybe the tilt was to large or there are other limits in gentle mode. The parameters I used today was: g_config.control.control_mode[0] 6 vert_vel_down_adding_max -10 mode_gentle_cfg_tors_gyro_range 130 mode_gentle_cfg_vert_vel_up 10 mode_gentle_cfg_vert_vel_down -10 mode_gentle_cfg_tilt_atti_range 55 avoid_atti_range 50 mode_gentle_cfg_rc_scale 1 g_config.mode_gentle_cfg.tors_exp_mid_point 0.300000

[2023-01-08 12:29:30] dereksynkopa : For example, the mini 1 allows you to change the descent parameter to -10 and it actually happens that the drone descends at 10 m/s. In the mini 2, unfortunately not.

[2023-01-08 12:54:04] baxove : Oh, that's sad. Is it pointless to try to increase horizontal speed (flying forward) if tilt angle is higher in gentle mode?

[2023-01-08 23:48:28] kilrah : yes when i tried gentle if i set to -1 then it'd go -1, just if you go beyond -3 it's clipped at -3 somewhere else

[2023-01-10 14:38:14] ibizahouse : ibizahouse joined the channel.

[2023-01-11 21:54:16] fredmicrowave : Checked with Kasperky, no threat detected.

[2023-01-12 21:08:57] loveyou : Hi, i want to know if i can to downgrade rc-n1 firmware?

[2023-01-12 21:08:57] loveyou : Hi, i want to know if i can to downgrade rc-n1 firmware? if i can how to?

[2023-01-13 01:03:06] areoc : Yes if you have the firmware

[2023-01-13 09:11:13] loveyou : How to?

[2023-01-14 00:50:06] tmbinc : Curious, why downgrade it?

[2023-01-14 07:23:01] oxolot : How to activate Wizard mode in DH?

[2023-01-14 07:23:01] oxolot : Anybody knows how to activate Wizard mode in DH?

[2023-01-14 08:02:43] eddy : fake - real ? (The screen does not look like the Mini 3 pro) https://www.youtube.com/watch?v=B3vrLDQgxZk

[2023-01-14 08:02:43] eddy : fake - real ? https://www.youtube.com/watch?v=B3vrLDQgxZk

[2023-01-14 08:19:16] azerbaijan : You can request from dji permissions on higher altitude than 500m.

[2023-01-14 09:09:53] eddy : yes, you are right ..

[2023-01-14 14:05:31] loveyou : by mistake i upgrade to the last version, since then I have disconnects, and some other problems.

[2023-01-14 17:17:30] areoc : My telegram Michael_Yb

[2023-01-17 03:03:51] eheran : eheran joined the channel.

[2023-01-18 12:14:58] tmbinc : Ok, I investigated this finally with the right tools.

[2023-01-18 12:16:21] tmbinc : Turns out, vert_vel_down is clipped to sport's vel_down :(, no matter which mode. (I didn't initially see this because lol `80 FE 80 0A` disassembles to a different instruction with VFPv4 - `FDIVS` - but it's actually `VMAXNM.F32 S0, S1, S0`)

[2023-01-18 12:17:21] tmbinc : So it uses Sport's vert_vel_down, reduced by down_vel_scale_in_high_altitude for altitudes higher than 500m (but this doens't matter here) and this is what caps the chosen value.

[2023-01-18 12:17:44] tmbinc : Same with vert_vel_up, vert_acc_up, vert_acc_down

[2023-01-18 13:52:20] gde : Hi, someone here can downgrade the m30t firmware?

[2023-01-19 14:26:15] sicivo3584 : sicivo3584 joined the channel.

[2023-01-19 17:18:27] baxove : Thanks for the investigation and explanation, very useful information. But what do you mean by "So it uses Sport's vert_vel_down, reduced by down_vel_scale_in_high_altitude for altitudes higher than 500m (but this doens't matter here) and this is what caps the chosen value"? Will it not be capped when the altitude is higher than 500m?

[2023-01-19 17:39:51] tmbinc : No, it will reduce the max value even more. The algorithm is: vert_vel_down = min(chosen_flight_mode->vel_vert_down, sport_mode->vel_vert_down * altitude_factor) Where altitude_factor = [1.0 ... down_vel_scale_in_high_altitude/100.0] for altitude [500..4500]

[2023-01-19 17:40:06] tmbinc : I.e., at altitude <= 500, it uses the sport vert_vel_down * 1.0

[2023-01-19 17:40:58] tmbinc : At altitude 4500, it uses sport vert_vel_down * (down_vel_scale_in_high_altitude/100.0)

[2023-01-19 17:41:02] tmbinc : and between them, it interpolates

[2023-01-19 17:41:09] tmbinc : down_vel_scale_in_high_altitude is [1..100]

[2023-01-19 17:41:45] tmbinc : so basically if you set it to 50, then the maximum downward velocity is ramped down from sport's max to 50% of sport's max between 500 and 4500m altitude

[2023-01-19 17:43:00] tmbinc : but as discussed over in general, the "NaN" trick for sport vert_vel_down appears to work well, at least in the simulator

[2023-01-20 07:30:59] baxove : Oh, I understand. Thanks. I will look into the NaN trick and maybe do a real careful flight test on a football field :slightly_smiling_face:

[2023-01-20 11:15:49] tmbinc : https://www.youtube.com/watch?v=YUHRFrWSoTk Did a test, and it worked great :) Except I nearly crashed the drone into the ground. Don't underestimate the time to brake.

[2023-01-20 12:14:20] baxove : Wow! Thanks for sharing. I will try this as well :D

[2023-01-20 12:19:49] tmbinc : Is there a free tool to overlay video with telemetry / stick usage? I saw https://djitelemetryoverlay.com but it's quite expensive

[2023-01-20 14:04:55] baxove : Sorry for my question, I have only used DH-tool for tweaking parameters. But how did you set mode_sport_cfg_vert_vel_down = 'nan'? Did you use a different tool or do I need adb root shell?

[2023-01-20 14:25:47] konraditurbe : The software is well worth it. I got it via a discount and use it for GoPro + Phone GPS sync.

[2023-01-20 18:01:21] tmbinc : You can't do it with DH today (but should be possible soon). It should work with `comm_og_service_tool.py` but I couldn't figure out how. (It's supposed to do that, though.) No adb root required either way. (I can later give you a `comm_serialtalk` parameter to do it manually)

[2023-01-20 21:34:18] tmbinc : The following sets the parameters for sport and gentle mode right to enable rapid (-10m/s) descend. Put flight mode switch to "S" (now mapped to "gentle" parameters) to enable. ``` python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "mode_gentle_cfg_vert_vel_down_0" -10.0 python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "g_config.mode_sport_cfg.vert_vel_down_0" nan python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "vert_vel_down_adding_max_0" -10.0 python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "fswitch_selection_1_0" 2 ``` should work. _On your own risk_.

[2023-01-20 21:34:18] tmbinc : ``` python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "g_config.mode_sport_cfg.vert_vel_down_0" nan python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "vert_vel_down_adding_max_0" -10.0 python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "fswitch_selection_1_0" 2 ``` should work. _On your own risk_.

[2023-01-20 21:34:18] tmbinc : ``` python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "mode_gentle_cfg_vert_vel_down_0" -10.0 python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "g_config.mode_sport_cfg.vert_vel_down_0" nan python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "vert_vel_down_adding_max_0" -10.0 python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "fswitch_selection_1_0" 2 ``` should work. _On your own risk_.

[2023-01-20 21:46:19] tmbinc : And use ``` python3 comm_serialtalk.py --port /dev/ttyACM0 -a 2 -t 1001 -r 0306 -s SIM -i 4 -x 0001ff0c419dcef83c83f5bf12a2f1ad7db9e53f00000000000000003f0000102c01022f33323130 ``` to enable the simulator. (Need a drone reboot to disable it)

[2023-01-20 23:11:23] oakley75 : I've used DashWare with success.

[2023-01-20 23:11:23] oakley75 : I've used DashWare with success. edit: Sorry just noticed stick input requirement. Disregard.

[2023-01-21 09:02:24] baxove : Thanks a lot @tmbinc! I've never used dji-firmware-tools before but it seems to work, I will try to fly it carefully later today. I checked how it looks in DH, just for fun, and it really sets it to nan :)

[2023-01-21 11:17:04] tmbinc : Yeah that looks good.

[2023-01-21 12:47:24] baxove : It actually even work on g_config.mode_sport_cfg.vert_vel_up_0. When I set it to nan and the gentle parameter to 10 it climbs 36 kph in the simulator. Pretty curious how that look in reality. :) I would like to permanently replace sport mode with gentle mode, but my problem is that in gentle mode it decreases the horizontal speed to around 38 kph, even when changing the gentle tilt to 40° as in sport mode. Maybe there is another cap somewhere.

[2023-01-21 15:13:40] baxove : So, I was out and tested the changes. And like in the simulator, the DJI Mini 2 now ascends and descends at 36 kpm (10 m/s), without any warnings, very nice! But unfortunately, like in the simulator, the horizontal speed is about 42 kph (no wind), not 58 kph like in sport mode. Somebody knows if there is a speed cap in gentle mode? Or can we somehow make the normal or tripod mode go as fast as sport mode and keep the gentle mode on fswitch_selection_1 = 2? I've tried to tweak some parameters in normal mode with no luck.

[2023-01-21 16:31:55] tmbinc : nice :)) on the ascend speed

[2023-01-21 16:32:14] tmbinc : I can check the speed limit. How is the speed limit implemented - is there an explicit limit or is it atti based?

[2023-01-21 16:32:26] tmbinc : I know they place various constraints on atti, also depending on altitude and battery

[2023-01-21 16:35:43] tmbinc : Also I wonder if vert_acc_up / vert_acc_down can/should be tweaked

[2023-01-21 16:36:21] tmbinc : I noticed in my "quick descend" test that breaking (by pulling up) didn't even remotely stress the batteries (as measured in battery current) so likely there's margin there as well

[2023-01-21 16:37:21] tmbinc : So there's tilt_atti_range, tilt_gyro_range, tors_gyro_range - are any of them interesting to tweak?

[2023-01-21 16:57:32] baxove : I don't know how the speed limit is implemented. In an earlier post you showed me a part of the code from the firmware, how did you access it? If you mean tilt_atti_range, tilt_gyro_range, tors_gyro_range for gentle mode, I tried to tweak them in the simulator. But could not fly faster than 42 kph. The only parameter that increased speed little bit in gentle mode was when setting mode_gentle_cfg_rc_scale to 1, I think it increased the speed with 1-2 kph but that is not so much.

[2023-01-21 18:07:56] tmbinc : This is all from decompiling the WM161 FC firmware

[2023-01-21 18:08:57] tmbinc : Ok I'll see what I can do. a.) I have a (cumbersome) exploit that I can use to patch parameters, but it could be useful to try in simulation. b.) There's a global atti limit override, but I don't know (yet) how it can be activated

[2023-01-21 19:49:03] quad808 : Nice work!

[2023-01-21 21:05:19] tmbinc : derowey: When you set gentle atti limit to 40, do you know if it actually reached that? I will try tomorrow and dump the final computed atti limit (actually I think it's also in the mission_cfg_atti_limit_debug report, i.e. can be extracted from flightlog). `final_atti_limit` is what is used, and it's pretty much the min() of all the values there

[2023-01-21 21:06:25] tmbinc : ``` 94703478: 0576: mission_cfg_atti_limit_debug mode_atti_limit 250 avoid_atti_limit 400 gimbal_atti_limit 899 avoid_vo_lost_atti_limit 400 compen_atti_limit 250 on_ground_atti_limit 349 braking_atti_limit 400 low_level_atti_limit 250 atti_compen_for_wind 250 saturation_atti_limit 493 bat_atti_limit 405 bat_sop_atti_limit 405 uncer_k_adjust_atti_limit 899 ex_modules_atti_limit 899 takeoff_atti_limit 250 final_atti_limit 250 near_ground_atti_limit 300 ``` So if you have a flight log from the max speed flight we could look what causes the limitation (or we just try in the simulator of course)

[2023-01-21 22:42:37] cs2000 : Just going back a tiny bit. We ran into this same sort of speed limit on the Mavic Pro 1 if anyone remembers, even with max prop speed and crazy tilt angles (like 60 degrees) there was always a hard speed limit. A good tailwind would sometimes push you over that however

[2023-01-21 22:43:34] cs2000 : I think the best guess we had at the time was that air speed was the maximum the drone was allowed to fly to ensure the processors on the drone were able to react and do what they need to do to keep the drone on-track, but these are only vague recollections from many many years ago

[2023-01-22 03:35:08] ian1638 : ian1638 joined the channel.

[2023-01-22 09:05:54] eddy : FYI, current consumption Mini2 - from log:: - When climbing +6m/s, the consumption from the Li-Ion battery (for the Mini1) was approx. 12A (however, it was extremely windy) - When descending -10m/s, the average consumption was about 2.3A (When using Li-Pol battery - for Mini 2, current consumption will be lower, due to higher voltage) I will repeat the measurement when the weather will be better.

[2023-01-22 09:05:54] eddy : FYI, current consumption Mini2 - from log:: - When climbing +6m/s, the consumption from the Li-Ion battery (for the Mini1) was approx. 12A (however, it was extremely windy) - When descending -10m/s, the average consumption was about 2.3A (When using Li-Pol battery - for Mini 2, current consumption will be lower, due to higher voltage) I will repeat the measurement when the weather is better.

[2023-01-22 09:32:21] baxove : No, I am not sure if it actually reached 40. But setting to lower value made the drone fly slower in the simulator. Haven't been able to look in the flight log, seemed encrypted to me (sorry, pretty new to this)

[2023-01-22 10:10:35] eddy :

[2023-01-22 13:19:22] baxove : Thanks for the measurement @eddy! Interesting to see.

[2023-01-22 17:17:52] quad808 : I am pretty sure speed is limited by GPS...unlimited in ATTI mode from what I remember on the Mavic 1. There was a guy who would test in really windy conditions, and with a tail wind, in ATTI mode with parameter tweaks, the Mavic 1 would rip!

[2023-01-22 18:10:41] tmbinc : Here's a tool to decrypt WM161 (Mini 2) logs, it's not perfect though. It re-"encrypts" them with the old obfuscation so they can be plugged into existing parsers. However I wasn't happy with most tools, maybe I'm missing something. (To clarify - this tool is useful for flight logs pulled from the drone itself, either via ADB or via FTP. In the FTP case, you need to undo the FTP encryption first, using the b"unavailable" key, lol. Flight logs collected by the App should not be encrypted as far as I know.)

[2023-01-22 18:10:41] tmbinc : Here's a tool to decrypt WM161 (Mini 2) logs, it's not perfect though. It re-"encrypts" them with the old obfuscation so they can be plugged into existing parsers. However I wasn't happy with most tools, maybe I'm missing something.

[2023-01-22 18:11:33] tmbinc : Nice measurements!

[2023-01-22 20:39:07] pingspike : 54.2MPH logged on the OG Mavic - https://greyarro.ws/t/breaking-the-speed-limit/3186 ??

[2023-01-23 00:23:26] jglx3p : jglx3p joined the channel.

[2023-01-23 13:28:59] m4x : I dont think its smart to set descent lower than gravitational accelleration

[2023-01-23 13:31:10] m4x : How do the motors act? Seems to me it would keep stable, then enter free fall and after a second rip back up, essentially keeping the accel of 1s drop

[2023-01-23 13:40:00] eddy : With my homemade FPV, I can descend in a controlled and stable manner at speeds above 30 m/s without any problems. Gravitational acceleration is a bit different: g = 9.832 m/s2 (my opinion)

[2023-01-23 13:48:42] baxove : Thanks!

[2023-01-23 14:17:45] m4x : Thats controlled free-fall (you cant descend faster than `g`*s unless motors run in reverse)

[2023-01-23 14:17:45] m4x : Thats controlled free-fall

[2023-01-23 15:09:37] eddy : Yes, reverse would solve it :) But it's more about air resistance and the idle speed of the propeller.

[2023-01-23 15:13:45] m4x : Yea drag and whatever lift drone gives from keeping stable

[2023-01-23 20:11:08] quad808 : Falling at -10 is awesome. All my older drones have this setting....completely stable fall....you just have to be sure to blip the throttle and slide sideways to avoid vortex ring state to slow down. You, of course, need to slow at a minimum safe height to ensure you slow down in time. Don't want to crater. LOL!

[2023-01-23 20:28:13] oakley75 : I used to love watching my big ol, heavy Phantoms coming screaming back down, stable as all get out. The sliding out of the vortex is a super important tip, Thanks for mentioning, I about forgot ha

[2023-01-23 20:28:13] oakley75 : I used to love watching my big ol, heavy Phantoms coming screaming back down, stable as all get out. The sliding out of the vortex is a super important tip, Thanks for mentioning

[2023-01-23 20:28:13] oakley75 : I used to love watching my big ol, heavy Phantoms coming screaming back down, stable as all get out.

[2023-01-24 06:55:12] eddy : I can confirm that the vortex is a piece of shit, you have to deal with it when descending. It will affect the speed of descent and stability as well as power consumption. However, if the wind is blowing (at least a few m/sec), I can confirm from the current measurement that the vortex blows sideways and does not have a negative effect.

[2023-01-24 06:55:12] eddy : I can confirm that the vortex is shit, you have to deal with it on the way down. It will affect especially the stability and at the same time energy consumption. However, if the wind is blowing (at least a few m/sec), I can confirm from the current measurement that the vortex blows sideways and does not have a negative effect. As long as it is not blowing, it is necessary to fly straight (ideally against the wind) as @quad808 wrote. I usually try to descend in a spiral from higher heights. But it's still amazing, thanks to @tmbinc, that it is possible to fall down -10m/s again on the Mini2. The last time I flew like this was with my old P4. Good job guys! :)

[2023-01-24 06:55:12] eddy : I can confirm that the vortex is shit, you have to deal with it on the way down. It will affect especially the stability and at the same time energy consumption. However, if the wind is blowing (at least a few m/sec), I can confirm from the current measurement that the vortex blows sideways and does not have a negative effect. As long as it is not blowing, it is necessary to fly straight (ideally against the wind) as quad808 wrote. I usually try to descend in a spiral from higher heights. But it's still amazing, thanks to @tmbinc, that it is possible to fall down -10m/s again on the Mini2. The last time I flew like this was with my old P4. Good job guys! :)

[2023-01-24 10:12:01] tmbinc : So in the simulator, even the "use CSC to disable motor" and then restart in flight works :)) I wonder if that works in reality. I know wm170 (FPV) can recover itself from about any situation, but can Mini 2?

[2023-01-24 10:34:04] kilrah : believe most do as long as they're falling flat enough to not exceed the max tilt angle

[2023-01-24 10:53:20] tmbinc : Is max tilt angle a problem even in flight? I know you can't start motors but if you're in flight, does the same check apply?

[2023-01-24 11:33:16] m4x : Speaking of

[2023-01-24 11:33:17] m4x : v8 = param_read_u8(0x81u, 2u, a3, a4); v11 = v8; if ( v8 ) { if ( v5 ) { v12 = recv_pack_log_entry(v8); ((void (*)(signed int, const char *, ...))v12[3])(2, "cfg -> no start motor check(%d)", v11); } return 0; }

[2023-01-24 11:37:55] m4x :

[2023-01-24 11:41:09] m4x : i vaguely remember some talk that other drones had a flag that bypasses the conditions for arm, at least found smth that looks like that for mini 2. And as long the drone thinks you are flying it should be skipping the checks anyway (from a quick look)

[2023-01-24 11:41:57] m4x : sim's motor handler looks more or less identical to real

[2023-01-24 11:42:05] m4x : so maybe..

[2023-01-24 11:45:31] m4x : Regarding tilt angle, u mean the one that starts throwing IMU errors? I know lots of ppl land on their hand and then flip the drone to turn off the motors, so that check probably applies. I guess motors will spin up as it naturally rotates while dropping tho (if the signal is constantly being sent)

[2023-01-24 11:45:31] m4x : Regarding tilt angle, u mean the one that starts throwing IMU errors? I know lots of ppl land on their hand and then flip the drone to turn off the motors, so that check probably applies. I guess motors will spin up as it naturally rotates while dropping tho

[2023-01-24 11:57:44] eddy : Test 1000 m UP and DOWN >> beautiful and problem-free steady descent -10 m/s with a power consumption of 2.2 A. Maximum satisfaction.

[2023-01-24 11:59:44] m4x : I think thats all startup checks https://hastebin.com/egoqezetis.apache

[2023-01-24 12:00:03] m4x : simulator (assuming that its table, have some indication for it), it has less checks

[2023-01-24 12:00:55] m4x : surprised they have a extra "assistant protect" check

[2023-01-24 12:07:02] m4x : how was wind?

[2023-01-24 12:07:53] m4x : last log had quite a bit of current wiggle when the throttle dropped which i suspect was a initial stabilize phase but it seems absent here

[2023-01-24 12:12:04] eddy : At an altitude of about 1000m, the forecast is about 3-6m/s.

[2023-01-24 14:53:07] m4x : Did some more digging and the option i found was motor_no_start_motor_check (and it seems to be documented in one place to allow motor restart when the aircraft is inverted) and it matches my observations. Keep in mind this bypasses around 100 checks so better be careful when its set

[2023-01-24 14:53:48] m4x : (dunno about the other drones but thats honored for mini 2^)

[2023-01-24 14:53:48] m4x : (dunno about the other drones but thats for mini 2^)

[2023-01-24 15:27:44] m4x : Tho i wonder if this needs close_auto_stop_motor_check as well

[2023-01-24 16:10:21] kilrah : nice

[2023-01-24 16:11:08] m4x : On a quick test it doesnt seem to be able to set via conventional means tho, its def in there and honored..

[2023-01-24 16:11:23] m4x : so some more research is required

[2023-01-26 06:55:44] galbb12 : galbb12 joined the channel.

[2023-01-26 09:06:21] eddy : Hi boys. After a long time, DroneID (CIA .. ) reactivated itself on Mini2. I still use it the same way, I can't find a causal connection why it happened. I always use the same apk version on a dedicated device isolated from the internet. I still don't know if it was caused by the apk or the drone itself. Did you happen to find a possible reason somewhere in the code? (Time dependency or something else) I know that you can't rely 100% on turning off DroneID, but I'm angry that I can't find the reason.

[2023-01-26 15:33:40] eddy : Guys, I have an idea: Would it be, please, possible to add to the current hack so that the button on the drone that is used to activate the FCC mode (Mini2) can be used to disable the DroneID at the same time? It would simplify the preparation of the drone for launch.

[2023-01-26 16:49:08] barretop : barretop joined the channel.

[2023-01-26 17:18:00] dereksynkopa : I can bring to the discussion that the mini 2, after turning off the engines in flight, will not allow them to turn on even if it falls in a horizontal position. I have it tested. The throne goes down in autorotation if there's still some energy left in the batteries to close the transistor keys. Resistance is needed. Retrying to turn on the drone will not be possible due to the drone moving more than approx. 20 km/h. It will be similar if you want to launch the drone in a moving car. A navigation system error will appear. This may be related to the operation of the GPS.

[2023-01-26 17:18:00] dereksynkopa : I can bring to the discussion that the mini 2, after turning off the engines in flight, will not allow them to turn on even if it falls in a horizontal position. I have it tested. The throne goes down in autorotation if there's still some energy left in the batteries to close the transistor keys. Resistance is needed. Retrying to turn on the drone will not be possible due to the drone moving more than approx. 20 km/h. It will be similar if you want to launch the drone in a moving car. A system error will appear. This may be related to the operation of the GPS.

[2023-01-26 17:44:26] areoc : g_config.fdi_open.close_auto_stop_motor_check =0

[2023-01-26 20:06:37] dereksynkopa : Is this the answer to my problem?

[2023-01-26 21:12:35] tmbinc : @dereksynkopa oh interesting (and RIP mini2?). Do you have a flightlog of the attempt?

[2023-01-27 06:34:41] dereksynkopa : Of course I have. However, it lasts from the start until the engines are turned off. There is no record during free fall. Also, I'm afraid to share my flight log.

[2023-01-27 07:40:43] baxove : @dereksynkopa Oh, sad to hear that your Mini 2 crashed. Can I ask you if this was a controlled test or is this related to the fast descent speed we where discussing earlier?

[2023-01-27 16:14:37] dereksynkopa : Nothing wrong with the drone happend. He was falling from 2000m at a speed of about 16m/s, after I had reached nearly 4km. He fell on a plowed field and slightly stuck in the ground. I turned off the engines at about 14% battery to preserve vision and for engine braking in autorotation. It was an extreme flight with a happy ending because I was prepared.

[2023-01-27 16:14:37] dereksynkopa : Nothing wrong with the drone. He was falling from 2000m at a speed of about 16m/s, after I had reached nearly 4km. He fell on a plowed field and slightly stuck in the ground. I turned off the engines at about 14% battery to preserve vision and for engine braking in autorotation. It was an extreme flight with a happy ending because I was prepared.

[2023-01-27 17:14:53] baxove : Oh ok, I understand. Nice that the drone survived :)

[2023-01-28 15:03:30] baxove : @tmbinc, do you know if there is a difference between setting the "fswitch_selection_1_0" to 2 and 6? I get the same result in the simulator. Are they both gentle mode or are they different in some way?

[2023-01-28 15:27:44] lokidokister : lokidokister joined the channel.

[2023-01-28 16:03:58] tmbinc : that's a fair question, it also results in the gentle parameters being used, but via different codepath

[2023-01-28 16:13:46] tmbinc : There's a variable I call "rc_mode" (not sure what the actual name is), it's: - 1 when novice_func_enabled, the modes are then [7,7,7], - 3 when "app requests sport mode", the modes are then [8,8,8], - 2 when no RC is connected, the modes are then [mr_sa_mission_cfg.default_power_up_control_mode, mr_sa_mission_cfg.default_power_up_control_mode, mr_sa_mission_cfg.default_power_up_control_mode] - 2 also when g_status_rc_current_mode_switch (the switch on the remote) is invalid, i.e. >= 3, Otherwise, it selects the mode from the array via g_status_rc_current_mode_switch, i.e. looks up the selected mode via the mode switch from the fswitch_selection array. For the selected mode (i.e. fswitch_selection[current_mode]), it does: - 6 -> rc_mode=1, mode_sel_a = 0, - 7 -> rc_mode=2, mode_sel_a = 0, - 8 -> rc_mode=3, mode_sel_a = 0, - 2 -> rc_mode = 0, mode_sel_a = 1, - 3 -> rc_mode = 0, mode_sel_a = 2, - 4 -> rc_mode = 0, mode_sel_a = 3, (confused? I'm too.) After that, it computes the parameter limits. It first handles missions (which I'll ignore here), and then: - for rc_mode = 0, it selects "normal", set mode_sel_b = 0 - for rc_mode = 1, it selects "gentle", set mode_sel_b = 1, - for rc_mode = 2, it selects "normal", set mode_sel_b = 2, - for rc_mode = 3, it selects "sport", set mode_sel_b = 3, Then, - for mode_sel_a = 0, it's done. - for mode_sel_a = 1, it selects "gentle". - for mode_sel_a = 2, it selects "normal", - for mode_sel_a = 3, it selects "sport" From all of this, it seems that 2,3,4 are handled like 6,7,8, but somehow in a different way.

[2023-01-28 16:43:52] baxove : Oh interesting, thanks for the explanation. I am currently using the NaN trick with gentle mode on the tripod switch and made the normal mode ascent and descent like in sport (5 up and -3.5 down). This way I can fly horizontally in full speed in sport mode when needed (sadly ascent and descent will not work in this mode). It's not the best setup but I haven't figured out if it's possible to make gentle or normal mode fly horizontally as fast as in sport mode.

[2023-01-28 16:43:52] baxove : Oh interesting, thanks for the explanation. I am currently using the NaN trick with gentle mode on the tripod switch and made the normal mode ascent and descent like in sport (5 up and -3.5 down). This way I can fly horizontally in full speed in sport mode when needed (sadly ascent and descent will not work in this mode). It's not the best setup but I haven't figured out if it's possible to make gentle or normal mode fly as fast as in sport mode.

[2023-01-28 18:10:04] dereksynkopa : Hi. I'm trying to check it myself and I don't think I'm doing everything right. I set down_vel_scale_in_high_altitude to 50, but the lowering was -3.5. How to do it in practice? Switch between modes? Normally I have ATTI instead of CINE, does that change the situation?

[2023-01-29 08:36:24] baxove : If I understood tmbinc correct, setting down_vel_scale_in_high_altitude to 50 will reduce the sport modes vertical speed at high altitudes (between 500m - 4500m), and you don't want that. So keep it at 100. To get descent speed at -10 you will have to use gentle mode and change these parameters "mode_gentle_cfg_vert_vel_down_0" = -10.0 "g_config.mode_sport_cfg.vert_vel_down_0" = nan "vert_vel_down_adding_max_0" = -10.0

[2023-01-29 08:41:03] baxove : And then you have to choose which switch to set the gentle mode on, for example on sport mode "fswitch_selection_1_0" = 2

[2023-01-29 13:01:49] tmbinc : Yes, down_vel_scale_in_high_altitude is not useful for our purpose.

[2023-01-29 19:52:51] dereksynkopa : Thanks, I'll try it. I also tried manual mode fswitch_selection=0 and in mini 2 it works, provided you are not using dronehack. There's a collision here. The drone actually works like an fpv and with the throttle position at 0, the drone drops very quickly. The problem is that the gimbal maintains the level and it is very easy to lose control without seeing the position of the drone. It happened to me several times to turn the drone and fall down.

[2023-01-29 20:08:58] dereksynkopa : "g_config.mode_sport_cfg.vert_vel_down_0" = nan "vert_vel_down_adding_max_0" = -10.0 I don't have these settings in my parameters. f.v. 1.3.0000

[2023-01-29 22:28:44] cygnus-x1 : cygnus-x1 joined the channel.

[2023-01-30 07:25:44] baxove : I'm also on firmware 01.03.0000, you should have those parameters. Are you looking in DH-tool? You will not be able to set nan values with DH

[2023-01-30 09:30:01] dereksynkopa : Yes, I'm trying to do this with DH. So what tool should I use?

[2023-01-30 11:51:21] baxove : tmbinc provided useful information earlier in this channel. Basically use dji-firmware-tools and run this commands python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "mode_gentle_cfg_vert_vel_down_0" -10.0 python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "g_config.mode_sport_cfg.vert_vel_down_0" nan python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "vert_vel_down_adding_max_0" -10.0 python3 comm_og_service_tool.py --port /dev/ttyACM0 wm160 FlycParam set "fswitch_selection_1_0" 2

[2023-01-30 21:00:08] loaderbull : Hi all, curious as to whether the Mavic 3 Classic combined with the RC Pro controller can be hacked to FCC? I know the RC Pro can but a warning has appeared on website stating that issues can arise with C1 certification. Anyone tried the RC Pro hack with the Mavic 3 Classic? I don’t want to press go on the combo and be stuck in CE mode..

[2023-01-30 22:19:54] dereksynkopa : Thanks. What should be the correct answer after each command? Despite entering the correct com port number, comm_og_service_tool.py prompts for an argument.

[2023-01-31 03:50:48] accountfrompl : accountfrompl joined the channel.

[2023-01-31 08:42:28] cs2000 : Yes, that hardware combination is supported and will enable FCC. There has just been some occasions where doing the C1 certification & then applying the hacks has made the C1 certification disappear. Some people rely on this being C1 certified to do their work and DH couldn't guarantee this would still be valid/working after applying hacks, hence the warning.

[2023-01-31 10:13:01] loaderbull : Thanks for the response, not sure that’s helped my bank balance tho. Cheers!

[2023-01-31 17:28:56] baxove : I don't remember. But you should get a confirmation that it's set.

[2023-02-01 19:58:30] dereksynkopa : I don't understand why I can't set it. I have this answer: C:\DJI\dji-firmware-tools-master>python3 comm_og_service_tool.py --port com3 /dev/ttyACM0 wm160 FlycParam set "mode_gentle_cfg_vert_vel_down_0" -10.0 usage: comm_og_service_tool.py [-h] (--port PORT | --bulk) [-b BAUDRATE] [-w TIMEOUT] [--dry-test] [-v] [--version] product command ... comm_og_service_tool.py: error: argument product: invalid choice: '/DEV/TTYACM0' (choose from 'A2', 'P330', 'P330V', 'P330Z', 'P330VP', 'WM610', 'P3X', ' P3S', 'MAT100', 'P3C', 'MG1', 'WM325', 'WM330', 'MAT600', 'WM220', 'WM620', 'WM331', 'MAT200', 'MG1S', 'WM332' , 'WM100', 'WM230', 'WM335', 'WM240', 'WM245', 'WM246', 'WM160', 'WM231', 'WM232', 'WM260', 'WM247')

[2023-02-01 19:59:55] dereksynkopa : When I try to use CIAjeepDoors.py I got the correct droneid disabled info, that is connecting via com 3 worked fine. Where to make a mistake?

[2023-02-01 19:59:55] dereksynkopa : When I try to use CIAjeepDoors.py I got the correct droneid disabled info, that is connecting via com 3 worked fine. Where am I making a mistake?

[2023-02-01 19:59:55] dereksynkopa : When I try to use CIAjeepDoors.py I got the correct droneid disabled info, ie connected via com 3 working fine. Where am I making a mistake?

[2023-02-01 21:27:07] tmbinc : Remove /dev/ttyACM0. That is the "port" number (on Linux)

[2023-02-01 22:39:18] dereksynkopa : It helped immediately, my mistake because I don't know linux. Thanks

[2023-02-02 08:13:47] dereksynkopa : I really like the fact that the mini 2 automatically increases the power of the engines after takeoff if you just try to let it out of your hand. I really miss this in the mini 3 pro. Do you know what parameter is responsible for this?

[2023-02-04 10:56:09] dereksynkopa : Today I made flights checking the new possibilities of the mini 2 drone. With a fairly strong wind, I must say that the drone behaves wonderfully. Here are some conclusions: the climb, despite the setting at 10m/s, could not be made due to air resistance and strong wind. The fastest climb was 8 m/s, the wind at the top measured in the ATTI mode was 16 m/s. But going down is pure poetry. Stable -10m/s no jerking and no vibration. I was wondering about the lack of possibility to fly in gentle mode at speeds greater than 5m/s and it seems unnecessary. I have it set to 1 m/s. This meant that the drone did not struggle to maintain its position in the air and did not use energy unnecessarily. Yes, it is blown away by the wind, but it doesn't matter at this point. What's important is that it's going up fast. I also turned on the "...close_auto_stop_motor_check" parameter to check if there might be a "navigation system error" when driving at a speed greater than about 20km/h, but it does. I used to get the same error when I tested falling down with engines off in autorotation. This prevents the in-flight engines from starting when falling down. If this could be turned off, it would be possible to descend at 16m/s with the heavier 3500mah battery. What do you think about it?

[2023-02-04 10:56:09] dereksynkopa : Today I made flights checking the new possibilities of the mini 2 drone. With a fairly strong wind, I must say that the drone behaves wonderfully. Here are some conclusions: the climb, despite the setting at 10m/s, could not be made due to air resistance and strong wind. The fastest climb was 8 m/s, the wind at the top measured in the ATTI mode was 16 m/s. But going down is pure poetry. Stable -10m/s no jerking and no vibration. I was wondering about the lack of possibility to fly in gentle mode at speeds greater than 5m/s and it seems unnecessary. I have it set to 2 m/s. This meant that the drone did not struggle to maintain its position in the air and did not use energy unnecessarily. Yes, it is blown away by the wind, but it doesn't matter at this point. What's important is that it's going up fast. I also turned on the "...close_auto_stop_motor_check" parameter to check if there might be a "navigation system error" when driving at a speed greater than about 20km/h, but it does. I used to get the same error when I tested falling down with engines off in autorotation. This prevents the in-flight engines from starting when falling down. If this could be turned off, it would be possible to descend at 16m/s with the heavier 3500mah battery. What do you think about it?

[2023-02-05 13:15:26] dereksynkopa : Hi. How did you manage to reach 42km/h in gentle mode? I only have 2.2m/s Even if I increase mode_gentle_cfg_tilt_atti_range to 40 and 60, my speed will increase to 3m/s maximum. I am also looking for the possibility of increasing the speed to 16 m / s but so far with poor results. Regards.

[2023-02-05 16:01:36] baxove : I've set the gentle parameters to the same values as in sport, except "mode_gentle_cfg_rc_scale", you can set that to 1. I was hoping to get the same horizontal speed as in sport but it didn't work. I have still not figured it out if that's possible in gentle mode. Be aware that setting any parameter values in DH-tool can reset the nan values. If it happens, just run the commands again.

[2023-02-05 16:08:50] baxove : Currently I am having the gentle mode on the tripod switch and some tweaks on normals vertical speed. With this setup it's possible to reach top horizontal speed in sport mode when needed. The down side is that you can't ascend or descend in sport mode. The top speeds with this setup is as follows: In Gentle Top descent speed: 36 km/h Top ascent speed : 36 km/h Top horizontal speed: 43 km/h In Normal Top descent speed: 12,8 km/h Top ascent speed : 18 km/h Top horizontal speed: 35 km/h In Sport Top descent speed: 0 km/h Top ascent speed : 0 km/h Top horizontal speed: 58 km/h

[2023-02-05 18:05:40] dereksynkopa : Thanks, that totally helped. I don't think I need sport mode so much anymore. I have gentle in its place and cine in atti mode, which allows me to fly even faster. Flight without wind 16.6 m/s (60 km/h), and with the wind practically no speed limit. The ability to fly in atti is very useful, you become a better drone operator, more aware of your manual operations. This mode gives you one more possibility to measure the direction and strength of the wind at any height, in addition, with a small wind, it allows you to make very smooth movie shots. You should try.

[2023-02-05 18:05:40] dereksynkopa : Thanks, that totally helped. I don't think I need sport mode so much anymore. I have gentle in its place and cine in atti mode, which allows me to fly even faster. Flight without wind 16.5 m/s (nearly 60 km/h), and with the wind practically no speed limit. The ability to fly in atti is very useful, you become a better drone operator, more aware of your manual operations. This mode gives you one more possibility to measure the direction and strength of the wind at any height, in addition, with a small wind, it allows you to make very smooth movie shots. You should try.

[2023-02-05 18:05:40] dereksynkopa : Thanks, that totally helped. I don't think I need sport mode so much anymore. I have gentle in its place and cine in atti mode, which allows me to fly even faster. Flight without wind 16.6 m/s (nearly 60 km/h), and with the wind practically no speed limit. The ability to fly in atti is very useful, you become a better drone operator, more aware of your manual operations. This mode gives you one more possibility to measure the direction and strength of the wind at any height, in addition, with a small wind, it allows you to make very smooth movie shots. You should try.

[2023-02-06 12:26:06] dereksynkopa : Yesterday I had a very strange situation. While descending, there was a loss of signal for 3.8s, at the same time the drone entered autolanding due to critical low voltage, which was not true, it had 49% and a total voltage of 7.5V. Two errors 30029 and 30033 were recorded. Everything was done right overhead at the homepoint. I have smart landing protect turned off and it works fine when returning from outside the homepoint. The drone has never descended automatically at critical low voltage. This time it was different. Therefore, there must also be another instruction to perform autolanding. The worst thing, however, was that he was descending at a speed of 3m/s and there was no way to cancel the autolanding. It was very stressful. Everything ended well, the drone landed on its own. I could only steer left and right. Autolanding could not be turned off. I repeated the test situation by turning off the rc, the drone also entered autolanding, but without error 30033 and it was possible to delete it.

[2023-02-06 13:31:06] baxove : Sounds strange. Do you have the same parameter tweaks for disabling auto landing as me? bat_level_1_action = 0 bat_level_2_action = 0 bat_enable_smart_bat_landing_protect = 0

[2023-02-06 18:58:59] dereksynkopa : bat_level_2_action = 0 Here I had it set to 2. I already changed it to 0.

[2023-02-06 18:59:08] eug3nix : eug3nix joined the channel.

[2023-02-06 22:55:10] tmbinc : @dereksynkopa can you recover the flight log from the drone? I understand you don't want to share it, but could you run my decoder script and perhaps share/look at a few reports? battery_info report e.g. would be very interesting

[2023-02-06 22:55:47] tmbinc : the FC text log may also show what's going on.

[2023-02-07 08:28:27] dereksynkopa : When I get home from work, I'll try to decode the flight log. Previous attempts to decode failed.

[2023-02-07 09:26:59] tmbinc : I always had issues with datconv and mini2 but maybe that was just me

[2023-02-07 18:48:21] dereksynkopa : C:\DJI\dji-firmware-tools-master>python3 decrypt_wm161_log.py -? Traceback (most recent call last): File "C:\DJI\dji-firmware-tools-master\decrypt_wm161_log.py", line 2, in <module> from Crypto.Cipher import AES ModuleNotFoundError: No module named 'Crypto' Do I need to install this module?

[2023-02-07 18:48:21] dereksynkopa : C:\DJI\dji-firmware-tools-master>python3 decrypt_wm161_log.py -? Traceback (most recent call last): File "C:\DJI\dji-firmware-tools-master\decrypt_wm161_log.py", line 2, in <module> from Crypto.Cipher import AES ModuleNotFoundError: No module named 'Crypto'

[2023-02-08 07:36:55] oxolot : Definitely. Use pip3 install pycryptodome

[2023-02-08 07:36:55] oxolot : Definitely. Use 'pip3 install pycryptodome' or 'pip install pycryptodome' - depending on your version

[2023-02-08 21:13:55] dereksynkopa : I've installed all the required modules, but I still have a problem with the correct syntax. Is it something like that?

[2023-02-08 21:13:55] dereksynkopa : I've installed all the required modules, but I still have a problem with the correct syntax. Is it something like that? python3 decrypt_wm161_log.py -fi 1.txt

[2023-02-08 21:49:50] tmbinc : python3 decrypt_wm161_log.py FLYxxx.DAT out_decrypted.dat

[2023-02-09 22:15:00] dereksynkopa : Flyrecord files from mni 2 are encrypted but with txt extension. You can extract the .dat file in the Mini 2 using DJI Assistant 2, but the file is almost 500MB. Decryption takes forever. Then how to get a flyrecord from one flight with a .dat extension? Just replacing the txt extension with dat did not bring good results. The out_decrypt_dat file is basically empty.

[2023-02-10 01:21:33] tmbinc : DA2 should give you a "EXPORT_FILE_<date>.DAT"

[2023-02-10 01:21:43] tmbinc : You can use datcon's ExtractDJI.exe to extract that

[2023-02-10 01:22:10] tmbinc : Oh I see they are still encrypted with the FTP key then

[2023-02-10 01:26:52] tmbinc : use this tool to decrypt the flyctrl/FLYxxx.DAT

[2023-02-10 01:36:43] tmbinc : After that, you should have files that start with "BUILD Jan 4 2022 20:18:09" (or whatever firmware you have)

[2023-02-10 01:37:11] tmbinc : then, you use decrypt_wm161_log.py on it

[2023-02-10 01:37:39] tmbinc : should create a similarly-sized file but that one can then be read with the usual tools

[2023-02-10 20:53:56] dereksynkopa : Your instruction is great. I learned a lot, for which I thank you. The final decrypted file however is still human readable in notepad.exe. All characters like ? B BUILD May 25 2021 15:38:40 z fleeadUU_ňŞ.DcT.×)“ě©ĆR_ňŞ.DcT.×)“ě©ĆR_UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUł_ \` What usual tools to see readable flight data? Will you find some more patience for me?

[2023-02-10 20:53:56] dereksynkopa : Your instruction is great. I learned a lot, for which I thank you. The final decrypted file however is still human unreadable in notepad.exe. All characters like ? B BUILD May 25 2021 15:38:40 z fleeadUU_ňŞ.DcT.×)“ě©ĆR_ňŞ.DcT.×)“ě©ĆR_UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUł_ \` What usual tools to see readable flight data? Will you find some more patience for me?

[2023-02-10 20:53:56] dereksynkopa : Your instruction is great. I learned a lot, for which I thank you. The final decrypted file however is still human unreadable in notepad.exe. All characters like: ? B BUILD May 25 2021 15:38:40 z fleeadUU_ňŞ.DcT.×)“ě©ĆR_ňŞ.DcT.×)“ě©ĆR_UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUł_ \` What usual tools to see readable flight data? Will you find some more patience for me?

[2023-02-10 21:32:36] tmbinc : Try datcon (https://datfile.net/)

[2023-02-10 21:32:47] tmbinc : it should at least give you a readable logfile and a CSV

[2023-02-11 19:41:24] dereksynkopa : I would love to provide you with the flyrecord you asked for. I used datcon and got some readable files with txt extension e.g. log, config, csv and kml. Unfortunately, I did not see the date when the flight was performed in any of them. Is it possible? KML is 1kb and practically nothing in it. The DAT file from the mini 2 provided 10 FLYxxx.dat files. Does this mean that the drone's memory is only enough for the last 10 flight records? Since then, I have made over 20 flights. I still have the flyrecord of the day of this autolanding event, but it's not a dat, just an encoded txt. I can't do anything with it with the tools you recommended.

[2023-02-12 09:44:06] baxove : I have been attempting to execute adb commands on my Mini 2, but my device is not appearing on the adb devices list. It is correctly connected to the COM3 port and all other tools are functioning properly. I am wondering if I am missing a driver, or if the drone has a USB debugging mode that needs to be enabled?

[2023-02-12 10:35:08] kilrah : well did you root it?

[2023-02-12 12:48:13] baxove : Oh, I was not aware that the device needs to be rooted first in order to be listed. I will try rooting it and see if that works. Thank you for letting me know. By the way, does DUMLRacer work on the DJI Mini 2 with firmware version 01.03.0000?

[2023-02-12 13:01:31] kilrah : this was patched half a decade ago... DH can get you ADB on that firmware with a pro license

[2023-02-12 13:25:32] baxove : Yes, I understand. I currently have a regular license, and I regret not purchasing the pro license initially. My goal is to execute a startup script every time I power on the drone, specifically "./dji_configs -s g_config.mode_normal_cfg.rc_scale -v 1". However, this parameter typically resets after each boot, so I am uncertain whether this will be effective. Could you advise me on whether this will work or if purchasing the pro license would be of no use in my scenario?

[2023-02-12 13:30:49] kilrah : seems weird that rc_scale would reset

[2023-02-12 13:37:15] baxove : I have tried to set it using DH and dji-firmware-tools, but it continues to reset after the next boot. This issue solely pertains to mode_normal_cfg.rc_scale, as mode_gentle_cfg_rc_scale can be set without any problems.

[2023-02-12 16:22:54] tmbinc : Even with root, persisting on mini 2 is annoying because the rootfs (and /system) is squashfs, i.e. not writeable, even without considering dmverity

[2023-02-12 16:23:13] tmbinc : I don't remember, but doesn't DH's FCC hack execute a script that you can edit?

[2023-02-12 16:23:26] tmbinc : what's rc_scale used for, btw?

[2023-02-12 16:53:22] baxove : I understand, it seems that rooting the drone may not resolve my issue after all. I'm not quite sure, but I think rc_scale is a parameter that affects the sensitivity of the remote control stick input, and can limit the maximum speed of the drone when set to lower values. In the simulator, I was able to increase the speed of the normal mode by setting the rc_scale value to 1 during the simulated flight. This made it fly faster (to 43 km/h), maybe as fast as the sport mode, although the maximum speed in the simulator is only 43 km/h even in sport mode, which is a bit strange

[2023-02-12 18:51:37] kilrah : have you actually tried to fly with the real aircraft with normal setting and 1?

[2023-02-13 07:37:08] baxove : Yes, it resets once the motor starts. That's why I had to try to set the value in the simulator during a simulated flight. As soon as the value is set to 1, the top speed increases from 35 km/h to 43 km/h

[2023-02-13 19:25:57] sistor : sistor joined the channel.

[2023-02-13 22:48:42] oakley75 : 1. On the Mini 2, is there any benefit to flashing 01.03.0601? My gen 1 should accept it, not sure if there are any desirable reasons to upgrade from 01.03.0000. ARB is supposedly the same, and DH works with it. But don't want to lose Jeep compatibility. 2. Why does DH site list Air 2 01.00.0460 as incompatible, yet I've been on it since literally day one? Website used to say .460 was good, but now says no. Did something change after the cert went online-based? I ask bc I haven't updated my certs since the old offline version. I'm happy to update Air 2 to 01.01.0610 if it's indeed safe to, but since it changes my ARB, I'm always a little spooked to update.

[2023-02-13 22:48:42] oakley75 : 1. On the Mini 2, is there any benefit to flashing 01.03.0601? My gen 1 should accept it, not sure if there are any desirable reasons to upgrade from 01.03.0000. ARB is supposedly the same, and DH works with it. But don't want to lose Jeep compatibility. 2. Why does DH site list Air 2 01.00.0460 as incompatible, yet I've been on it since literally day one? Website used to say .460 was good, but now says no. Did something change after the cert went online-based? I ask bc I haven't updated my certs since the old offline version. I'm happy to update Air 2 to 01.01.0610 if it's indeed safe to, but since it changes my ARB, I'm always a little spooked to update. edit: 3. What are y'all using to flash remote firmware? DH still doesn't it seems, and Assistant gives an error. Btw it's an old RC-N1 controller with firmware 01.00.0108 on it. My other N1 has 04.11.0016 on it and gives no error, even though Assistant says no update (04.11.0032 is available). Whatever DJI. Anyway, so I'd like to handle my own flashing you see.

[2023-02-13 22:48:42] oakley75 : 1. On the Mini 2, is there any benefit to flashing 01.03.0601? My gen 1 should accept it, not sure if there are any desirable reasons to upgrade from 01.03.0000. ARB is supposedly the same, and DH works with it. But don't want to lose Jeep compatibility. 2. Why does DH site list Air 2 01.00.0460 as incompatible, yet I've been on it since literally day one? Website used to say .460 was good, but now says no. Did something change after the cert went online-based? I ask bc I haven't updated my certs since the old offline version. I'm happy to update Air 2 to 01.01.0610 if it's indeed safe to, but since it changes my ARB, I'm always a little spooked to update. edit: 3. What are y'all using to flash remote firmware? DH still doesn't it seems, and Assistant gives an error. Btw it's an old RC-N1 controller with firmware 01.00.0108 on it. My other N1 has 02.00.1200 on it and gives no error, even though Assistant says no update (02.00.2000 is available). Whatever DJI. Anyway, so I'd like to handle my own flashing you see.

[2023-02-13 22:48:42] oakley75 : 1. On the Mini 2, is there any benefit to flashing 01.03.0601? My gen 1 should accept it, not sure if there are any desirable reasons to upgrade from 01.03.0000. ARB is supposedly the same, and DH works with it. But don't want to lose Jeep compatibility. 2. Why does DH site list Air 2 01.00.0460 as incompatible, yet I've been on it since literally day one? Website used to say .460 was good, but now says no. Did something change after the cert went online-based? I ask bc I haven't updated my certs since the old offline version. I'm happy to update Air 2 to 01.01.0610 if it's indeed safe to, but since it changes my ARB, I'm always a little spooked to update. edit: 3. What are y'all using to flash remote firmware? DH still doesn't it seems, and Assistant gives an error. Btw it's an old Air 2 RC-N1 controller with firmware 01.00.0108 on it. My other RC-N1 has 04.11.0016 on it and gives no error, even though Assistant says no update (04.11.0032 is available). Whatever DJI. Anyway, so I'd like to handle my own flashing you see.

[2023-02-17 10:34:34] kilrah : also had a remote that was on too old a version for assistant to offer anything for, had to use the fly app, manually go into "check updates" because it didn't prompt on its own, it would find one, flash that and then it's fine in assistant again

[2023-02-17 11:06:20] oakley75 : Yeah I even changed my DNS in case it was being blocked in Assistant. I actually did the app update prior, but of course it wants to force the latest version, and I am stubborn to the version I want. So I killed it.

[2023-02-20 14:48:07] baxove : Thank you for the suggestion to try the atti mode. I gave it a try yesterday for the first time and I must say, it was quite enjoyable. As you had mentioned, the drone flew really fast with the wind. My Mini 2 reached a speed of 100 km/h, which is pretty insane for a small drone like that :slightly_smiling_face:

[2023-02-21 06:15:50] gudvin : gudvin joined the channel.

[2023-02-21 19:38:46] dereksynkopa : Bravo, it's a great decision, I flew at a maximum of 35 m / s. Atti is great fun and a great tool to measure wind strength and direction. In strong winds, it is rather difficult to steer, but it is a lot of fun to fly.

[2023-02-21 19:38:46] dereksynkopa : Bravo, it's a great decision, I flew at a maximum of 35 m / s. Atti is great fun and a great tool to measure wind strength and direction. In strong winds, it is rather difficult to steer, but it is a lot of fun to fly. And one more important note: RTH in fail safe mode will work properly in ATTI. The aircraft will switch to Normal mode when out of range and use GPS to return to the homepoint.

[2023-02-22 10:30:06] accountfrompl : Any clues on resetting DJI RC in bootloop and with changed sys.usb.config to "bulk,adb" (each pc, portz cable I tried doesn't even discover it, not even as mass storage or smith) Should I even have hope that it's possible to restore?

[2023-02-24 01:31:11] ibndias : ibndias joined the channel.

[2023-02-26 00:33:40] lolo780 : Thanks for the work on the Mini2! Ascent and descent 10m/s working great, 2.11km landing with 50%.

[2023-02-26 03:17:29] lolo780 : I had trouble updating my RCN1. What worked eventually was just leaving it plugged in to the device with no drone connected. I flipped in and out of camera view a few times and after 10 min the update popped up.

[2023-02-26 04:33:35] oakley75 : I wasn't that patient, I went to the check firmware option in settings, but with only the RCN1 attached. Fly is the only way to update it, Assistant nor any other app that I know of will do it.

[2023-02-26 05:50:03] lolo780 : Do not upgrade your RCN1 firmware. I have to throw my remote away

[2023-02-26 05:50:57] lolo780 : It won't let the mini2 fly without upgrading the aircraft firmware to the latest. At least this rc was free

[2023-02-26 05:51:40] lolo780 : Fuck DJI

[2023-02-26 07:23:18] oakley75 : Buddy you just saved me. After years of never updating, I was about to upgrade one of them. Thanks for the info, that sucks about yours.

[2023-02-26 08:05:33] lolo780 : So I flashed the AC up to 01.03.0500 and it flies fine now. Not sure what was going on there.

[2023-02-26 08:05:44] lolo780 : Was on 01.03.0000

[2023-02-26 08:07:37] lolo780 : My main problem with the mini 2 is the shit radio handling when switching between 2.4 and 5.8. Unless you set 5.8 manual while near the RC, you have a good chance of losing it when flying high altitude or long range.

[2023-02-26 20:32:12] dereksynkopa : Has anyone tried the tuning options for the mini 3 pro? I am trying unsuccessfully to increase the ascent and descent speed to 10m/s. Scope is available but no response at all. The limitation works up to 5 m/s.

[2023-02-26 20:46:42] konraditurbe : Impulsively bought a Mini3 pro. Is the range acceptable on CE?

[2023-02-26 21:43:55] accountfrompl : Absolutely not.

[2023-02-26 21:44:03] accountfrompl : RCN1 or RC?

[2023-02-26 22:43:40] konraditurbe : RC-N1

[2023-02-27 00:05:42] accountfrompl : So you can download free app (for android) to be able to easily swap to FCC

[2023-02-27 02:46:20] lolo780 : Is there anything to watch out for when descending with a Mini 2? Ie. Descent slowing under 10% battery or anything stupid.

[2023-02-27 02:51:21] oakley75 : Just make sure to move it around in the air stream while descending. That's about it really.

[2023-02-27 05:31:16] lolo780 : 3,130m but having signal issues unless the antennas are aligned. Will go to 1 bar if I take a 360 pano. Stock RCN1 controller. What are you guys using for signal boosting?

[2023-02-27 06:10:39] oakley75 : That's an impressive number, very nice. Besides aligning the antennas, you can always rotate the craft slightly to clear the antenna on the AC at times when signal cuts out. The only thing about the old 2.4ghz I miss is using Yagi's lol. Otherwise, no real good option for the 5ghz that I know of. I did the active booster thing back in the day on a P2V+, but hardly seems necessary anymore with occusync kicking so much ass.

[2023-02-27 09:25:09] baxove : Nice altitude. Can I ask how much battery you had remaining when landing? Are you using the stock battery? My highest altitude reached is 3024 meters with 60% battery left when landing, using a modified 3600 mAh battery

[2023-02-27 09:25:09] baxove : Nice altitude. Can I ask how much battery you had remaining when landing? Are you using the stock battery? My highest altitude reached with Mini 2 is 3024 meters with 60% battery left when landing, using a modified 3600 mAh battery

[2023-02-27 18:31:40] quad808 : This is @lolo780 we are talking about here....king of high flying...

[2023-02-27 19:08:50] lolo780 : 38% at the top, 22% on landing. Not sure how accurate the percentages are. Stock battery. I haven't tried any other speeds than 10m/s yet.

[2023-02-28 01:49:20] jackma : jackma joined the channel.

[2023-02-28 02:00:45] jackma : .

[2023-02-28 08:43:13] lolo780 : Can you share details of your battery setup?

[2023-02-28 15:40:20] baxove : Do you mean details about the battery itself or what battery parameters I've tweaked? I bought the battery from a guy who modified the battery with Air 2 cells if I understood him right. I did a hover test, 100% to 10%, and got approximately 35% increase in flight time while hovering. I am noticing much better flight time in real flights as well. Parameters that I've tweaked related to battery: bat_level_1_action = 0 bat_level_2_action = 0 bat_enable_smart_bat_landing_protect = 0

[2023-02-28 18:36:06] lolo780 : 3,540m stock battery Mini 2. 16% on the ground.

[2023-02-28 21:58:17] tmbinc : Nice - did you reset H=0 somehow at the highest point?

[2023-03-01 00:07:53] lolo780 : That happens automatically

[2023-03-01 00:08:59] lolo780 : 3,276.8m it rolls over, goes to zero, then counts up from zero again

[2023-03-01 00:11:26] lolo780 : At 9,830m actual it'll roll over again, then at 10km the baro sensor runs out of measurement range. The IMU will still register, but the height change slows to a crawl.

[2023-03-01 07:29:45] baxove : That's impressive altitude, and interesting that it rolls over after 3,276.8m. Did you fly up and down at 10m/s with the nan hack? If I'm not mistaken my display shows N Mode in all modes when using the hack, but it shows S Mode in yours. And how was the wind condition, did the drone drift away on high altitude?

[2023-03-01 07:37:37] lolo780 : 10m/s both ways. I'm flying with the switch on S mode, nan hack, usual modded parameters. Wind extremely calm, but still couldn't get a 360 pano to complete. 3,924m here landing with 11%.

[2023-03-01 07:56:34] baxove : Wow, 3,924m is insane for Mini 2. What is the modded parameters you use, in case I've missed something?

[2023-03-01 08:19:28] lolo780 : I'll make a list, but basically what I read here. ATTI mode in place of tripod.

[2023-03-01 09:17:03] baxove : Thanks @lolo780

[2023-03-01 11:26:47] lolo780 : 4,523m with the Mini 2, stock battery, 10% beeps just coming on when landing. Flight timer showed over 2 min remaining, but not sure how it behaves at low battery levels, or how much past 0% it'll still fly.

[2023-03-01 11:28:58] lolo780 : This is on a stock RCN1 with a big S23 ultra attached, no airplane mode, 5.8ghz, manual, 10MHz wide, 99.x dB.

[2023-03-01 13:53:22] baxove : Wow, that's crazy! The remaining battery percentage was almost the same in your last test. Did you perform the test on the same day you flew to 3,924m? If you turned off the autolanding, there should be no problem flying below 10%. However, I think there might be some other type of autolanding when losing contact at high altitude. @dereksynkopa recently experienced something similar, and I think I had a similar experience a long time ago (although I did not set bat_level_1_action = 0 and bat_level_2_action = 0 back then, but I'm not sure if that makes any difference). I have landed with 0% battery some times with stock battery. The last time that happened, I flew for 1 minute and 15 seconds with 0%.

[2023-03-02 06:18:00] lolo780 : My Mini 2 parameters. This profile allows up/down at 10m/s in sport mode while still being able to move horizontally at a reasonable speed.

[2023-03-02 06:22:04] lolo780 : Wind conditions better and I pre warmed the aircraft to acquire GPS and then swapped in a 100% charged and warmed battery. I destroyed an M2P when it went into slow mode on descent below 10% battery. Since I knew I wasn't going to land it I put it over a safe area and shut the motors down so I'd at least have GPS to recover it.

[2023-03-02 06:25:50] lolo780 : Near perfect conditions.

[2023-03-02 07:56:43] oakley75 : This is fantastic, thanks brother. It's super nice to have all the settings/switches in one nice file. I shall use this indeed.

[2023-03-02 07:56:43] oakley75 : This is fantastic, thanks brother. It's super nice to have all the commands in one nice file. I shall use this indeed.

[2023-03-02 09:33:20] baxove : Thanks, you have almost the same tweaks as me, I will look into it more in the weekend. I've noticed you also used the nan hack on the tripod parameters, can I ask why?

[2023-03-02 09:35:04] lolo780 : Not sure why or if it does anything useful.

[2023-03-02 10:07:52] eddy : Interesting, quite similar to my setup. But what exactly is: rc_lost_action|g_config.fail_safe.protect_action = 1 (hover ?) g_config.flying_limit.avoid_ground_and_smart_landing_enable = 0

[2023-03-02 10:07:52] eddy : Interesting, quite similar to my setup. But what exactly is: rc_lost_action|g_config.fail_safe.protect_action = 1 (hover ?) g_config.flying_limit.avoid_ground_and_smart_landing_enable = 0 (sensor off?)

[2023-03-02 10:11:26] lolo780 : Rc lost = land. If you set RTH on signal lost the AC will try and fly back above the home point first which is definitely not what you want.

[2023-03-02 10:13:20] lolo780 : Avoid ground I think is disabling the downward sensors. Useful for landing on moving objects and allows control over landing right to the end. Also no chance of fog fooling the sensors.

[2023-03-02 10:15:23] eddy : Ok, thanks, fog is a bitch ;)

[2023-03-05 12:28:03] efwefaf : Can anyone use this to unlock the DJI T40 battery and modify the number of cycles

[2023-03-05 13:40:20] dereksynkopa : Does anyone know how to downgrade the rc231? Unfortunately, DJI Assistant 2 does not give this possibility, and DH does not support rc231.

[2023-03-06 03:54:05] sambuko : what kind of software?

[2023-03-06 07:19:50] areoc : I can downgrade as long as you have firmware

[2023-03-06 20:27:36] dereksynkopa : Yes, I have earlier firmware versions. The problem is with the tool to do it. What can do it?

[2023-03-08 13:44:51] mud : mud joined the channel.

[2023-03-08 20:30:07] gde : hello, how much?

[2023-03-09 15:45:40] dereksynkopa : For some unknown reason, DH-WIN stopped flashing the mini 3 pro. It detects the drone correctly and allows you to start the flashing procedure, but nothing happens after that, except for the information in please wait ... total progress 0%. It looks as if the drone could not switch to boot mode. Checked different versions of the software, cables and two PCs. How to get out?

[2023-03-09 15:47:31] lolo780 : Can a new mini 3 pro be offline activated?

[2023-03-09 16:52:11] cs2000 : No mate it cannot

[2023-03-10 04:37:47] jackhmcd : jackhmcd joined the channel.

[2023-03-10 20:36:43] dereksynkopa : Thanks to the help of sapport from DH, I started flashing. The procedure involves rebooting the drone at least three times (I've done five), which may set a flag to force a firmware reset. It worked perfectly. Maybe it will be of use to someone.

[2023-03-10 20:41:00] lolo780 : What are you doing to the mini 3 pro?

[2023-03-10 20:41:25] lolo780 : I just picked one up. Also might buy a DJI FPV fly more combo.

[2023-03-11 01:20:50] lolo780 : So the DJI FPV I'm looking at, the owner says it's got a DH license. Will that work with my account?

[2023-03-11 03:22:59] mavic2pro666 : Mavic Air2s 02.04.2190 firmware ， Can I downgrade or remove nfz directly from the certificate?

[2023-03-11 17:52:55] quad808 : All licenses bought are tied to the drones board serial number and the DH account of the person who bought it. No transfers to another email account. They would need to give you their DH email account and password as a work around. But I didn't tell you this.

[2023-03-11 17:52:55] quad808 : @lolo780 All licenses bought are tied to the drones board serial number and the DH account of the person who bought it. No transfers to another email account. They would need to give you their DH email account and password as a work around. But I didn't tell you this.

[2023-03-16 17:42:42] askohi : askohi joined the channel.

[2023-03-18 13:07:27] dereksynkopa : I analyzed and compared your parameter list with mine. You've made a lot of changes. Were all changes justified and had the desired result? I'd love to discuss it.

[2023-03-18 13:31:31] lolo780 : Dunno. I changed a lot of stuff based on experience with other drones.

[2023-03-18 13:31:50] lolo780 : But ask any specifics and I'll take a look.

[2023-03-18 16:58:36] dereksynkopa : For example, you set this value: vert_vel_down_adding|g_config.control.vert_vel_down_adding to 5, and the default value is 0. Have you accomplished anything?

[2023-03-18 17:54:18] lolo780 : I don't know what that does

[2023-03-18 21:12:30] lolo780 : Any downsides to using the latest Mavic 2 .790 firmware? Birdman says it's ok to use?

[2023-03-19 18:51:48] loaderbull : Im on 790 and no problems with it ?

[2023-03-19 21:13:20] lolo780 : Any plans to support Inspire 2 01.02.0600 for nfz and alt? The 0600 firmware supposedly fixes gimbal roll drift.

[2023-03-20 16:10:07] loveyou : I need to ask why nolimitdronez.com support fw: 02.04.2180 for Air2S and dronehacks is far away fw:02.04.2040. Please answer me if have plan to upgrade your hack so I know what to do?

[2023-03-20 17:58:14] loaderbull : Without being technical, it's a cat and mouse game not only between modders and DJI but also between modders. What one does with their software might not be able to be done with another and require a lot of re-coding to the application to enable different/updated functions. If there's a feature/fix in 2080 you need, purchase NLD. If not, carry on as you were i guess?

[2023-03-20 17:58:14] loaderbull : Without being technical, it's a cat and mouse game not only between modders and DJI but also between modders. What one does with their software might not be able to be done with another and require a lot of re-coding to the application to enable different/updated functions. If there's a feature/fix in 2180 you need, purchase NLD. If not, carry on as you were i guess?

[2023-03-20 20:54:05] tmbinc : Specifically for NFZ really there are just two choices - either the firmware checks the ECDSA signature on the license, or not. As far as I know (but then again, what do I know...) both DH and NLD use the same approach to deliver the license, which only works without ECDSA. So from my understanding, compatibility should be 100% the same. If it's not it may be a.) I'm wrong, or b.) there's an oversight on one end in the "supported firmwares"

[2023-03-21 11:19:40] cs2000 : I asked the question for you to the developer. > NLD and DH both use the same way to install the unlock certificate, there are nuances, but that does not change the compatibility. > DH does it a bit different, we send a fake userID and not the real userID also we install an persistence hack (that's why the drone reboots a few times), this persistence hack activates the certificate on each boot. > The Air2s is listed as "?" on the NLD homepage not as "checkmark", the compatibility should be exactly the same as DH. I think this is just an display glitch in the app. However feel free to test the 24h certificate from NLD to see if it maybe works for you. From our tests (of course we took a look at NLD!). > From our internal tests with the NLD app we saw that it is exactly the same compatibility as ours, Air2s up to firmware 2040 and Air2 up to 610. All other firmware came back as failed, in the NLD discord the users report the same

[2023-03-21 11:19:40] cs2000 : I asked the question for you to the developer. > NLD and DH both use the same way to install the unlock certificate, there are nuances, but that does not change the compatibility. > DH does it a bit different, we send a fake userID and not the real userID also we install an persistence hack (that's why the drone reboots a few times), this persistence hack activates the certificate on each boot. > The Air2s is listed as "?" on the NLD homepage not as "checkmark", the compatibility should be exactly the same as DH. I think this is just an display glitch in the app. However feel free to test the 24h certificate from NLD to see if it maybe works for you. From our tests (of course we took a look at NLD!), we saw that it is exactly the same compatibility as ours, Air2s up to firmware 2040 and Air2 up to 610. All other firmware came back as failed, in the NLD discord the users report the same

[2023-03-23 02:38:51] lolo780 : 4,611m with the DJI FPV, landing with 10%.

[2023-03-23 16:43:07] dronez4u : dronez4u joined the channel.

[2023-03-23 16:48:40] sappy : sappy joined the channel.

[2023-03-24 05:49:08] dereksynkopa : Bravo. This record will be hard to beat. Are you ascending 15m/s or 10m/s?

[2023-03-24 12:12:19] lolo780 : 15

[2023-03-24 14:46:12] anzz : Is it possible to flash the rc plus rm700, I try using the dh v.1.29 application, downloading the firmware from DDD, but nothing happens

[2023-03-26 01:30:48] kpetz : kpetz joined the channel.

[2023-03-26 01:58:48] lolo780 : 4,639m Mini 2, stock batt. Hovered over a minute near the ground after.

[2023-03-26 02:02:08] lolo780 : These 100% work. I was able to get 3 bars directly overhead which is worst case.

[2023-03-26 08:16:57] eddy : Nice performance. I assume that you had about 5-6% of the stock battery left. According to my tests, measurements and calculations, the maximum range of the Mini2 with a stock battery is around 4800-4900m.

[2023-03-26 08:16:57] eddy : Nice performance. I assume that you had about 5-6% of the stock battery left. According to my tests and measurements, the maximum range of the Mini2 with a stock battery is around 4800-4900m. An additional antenna is required in such a case.

[2023-03-26 08:16:57] eddy : Nice performance. I assume that you had about 5-6% of the stock battery left. According to my tests, measurements and calculations, the maximum range of the Mini2 with a stock battery is around 4800-4900m. An additional antenna is required in such a case.

[2023-03-26 11:29:03] lolo780 : 4% at 15:47, and 17:08 after forced landing.

[2023-03-26 11:35:24] lolo780 : On the ground after forced landing. I thought the voltage could run down lower than that?

[2023-03-26 19:19:28] quad808 : @lolo780 what adapter is that you put on the RC? Me likey

[2023-03-26 20:59:19] lolo780 : Anbee Parabolic Antenna Booster - Signal Range Extender Compatible with DJI Mini 3 Pro/Mavic 3 / Air 2 / Air 2S / Mini 2 SE Drone Remote Controller https://a.co/d/gHpmjxa

[2023-03-27 10:59:39] dereksynkopa : A better effect can be obtained by removing the antennas from the drone and positioning them horizontally along the arm for the flight vertically upwards. They must be temporarily attached, e.g. with Velcro.

[2023-03-27 12:11:58] eddy : Yes, or use Mini 3 pro. But it would need a certificate ;)

[2023-03-27 12:32:55] sappy : Hey guys I am currently investigating the Smart Controller RM500 for rooting possibilities since its an custom Android with an fastboot-like system. It should be possible with some Reverse Engineering which i am doing on the firmware of android right now (it is android 7, it should have some kind of known exploits still in it) I already got an connection to the bootloader but i am unable to send any command successfull. I also find out a special boot mode where the status LED is solid cyan. Does anyone know what purpose or meaning that has?

[2023-03-27 15:23:26] tmbinc : I don't know the RM500 a lot but for RM330 Solid Cyan == boot mode for the remote controller MCU (i.e. the chip that does power sequencing and handles the buttons - module 0600) . You can enter it by, I think, keeping some button pressed at boot. It will enter the bootloader, still allow the main system to be booted but it may not fully work.

[2023-03-28 05:48:46] lolo780 : Has anyone done a cert on a mini 3?

[2023-03-28 06:12:10] sappy : ah, thx for the tips. yeah i found out that button sequence, its both buttons at the back and the button most left (normally back button) anymore info about how module 0600 works?

[2023-03-29 22:03:06] zorast : On new Mini 3 Pro Firmware its now official possible to delete all Drone informations, also flight logs !! Hopefully coming for another Drones too ?

[2023-03-29 22:03:06] zorast : On new Mini 3 Pro Firmware its now official possible to delete all Drone informations also flight logs !! Hopefully coming for another Drones too ?

[2023-03-29 22:04:38] zorast :

[2023-03-29 22:05:34] zorast :

[2023-03-29 22:06:58] zorast : They write, if u remove the flight log before warranty repair, they can deny the warranty :-D

[2023-03-29 22:12:16] lolo780 : I wonder what other 'features' DJI added

[2023-03-29 22:13:01] lolo780 : Anyone know what the ARB is on the 0500 firmware?

[2023-03-29 22:13:29] tmbinc : Nice, but was about time! Especially since you can recover videos of the collision avoidance sensors (the .prores files)

[2023-03-30 09:29:59] cs2000 : release version="01.00.0500" antirollback="5" antirollback_ext="cn:5" Its in the queue to be added in DDD :)

[2023-03-30 16:36:08] loaderbull : Looks like DJi fixed the Air 2S not being able to take off the day after 1.9.8 of Fly was released (on FW 2040) with a new version of Fly 1.9.9? Was it a bug or do we think that is still the case with 2040 and Fly 1.9.9? Either way i see DH has the fix already ?

[2023-03-30 16:39:55] cs2000 : As far as anyone can tell, it wasnt a bug no.

[2023-03-30 16:40:18] lolo780 : Undocumented feature

[2023-03-30 16:40:42] cs2000 : Haha yes, 100%

[2023-03-30 16:40:57] loaderbull : So maybe it also grounded FW it shouldn't have perhaps...

[2023-03-30 16:41:16] lolo780 : Anyone got the mini 3 pro ti go more than 5m/s up or down?

[2023-03-30 19:25:55] accountfrompl : Also looking for solution. Tried drone-hacks param editing but no luck :(

[2023-03-31 04:40:33] moyditumla : moyditumla joined the channel.

[2023-03-31 13:41:22] cs2000 : Looks like 1.99 removed this block. Because it ONLY affected Air2S it seems highly unlikely it was a bug, either they activated it before they meant to or they received so much user backlash they removed it. Either way if you update to DJI Fly 1.99 the issue is gone.

[2023-04-02 04:06:22] normzy : normzy joined the channel.

[2023-04-03 08:23:27] cs2000 : Attention any Air 2 / Air 2s users, full downgrade from the latest firmware is now available https://drone-hacks.com/blog/post/816

[2023-04-03 08:24:06] lolo780 : V1.31 won't detect my mini 3 pro. 1.29 works still.

[2023-04-03 08:52:28] cs2000 : @lolo780 Just asked for some advice, this is what i got back. "The mini3 series is wonky somehow, i need to fix it in consecutive releases, but as said. it's not supported for desktop app hacks anyway (sure parameter editing is, but ...) My test mini3 works, but it needs to boot fully before connecting. then connect it, if fails to read restart dh app. Sometimes 2 times are needed. very strange"

[2023-04-03 08:53:06] lolo780 : Yeah

[2023-04-03 09:01:02] cs2000 : If you can send over a log file (C:\Users\YourUsername\.dronehacks) of it failing to connect, il pass it on for review

[2023-04-03 09:03:10] lolo780 : Ok. The mini 3 pro normally flies 10.6m/s in normal mode. DJI rates the maximum range at 12m/s, so I'm trimming N mode to go 12 and see what it'll do with the plus battery.

[2023-04-03 10:34:47] seraph1573 : I have the same issue with my air2. Unable to detect the devices on the front-end interface, but the log records that "DeviceInfo is good, let`s progress"

[2023-04-03 10:56:35] cs2000 : Thanks for the feedback, The devs are looking at a bugfix release shortly (today)

[2023-04-03 10:56:35] cs2000 : Thanks for the feedback, All fixed (i was told its a server side issue)

[2023-04-04 02:52:22] lolo780 : I taped over the downward cameras on the mini 3 pro and the drone will not land. I had to throw a towel over it. Not recommended.

[2023-04-04 03:06:43] lolo780 : Tried the NaN hack on mini 3 pro as it would be done on the Mini 2 and no success

[2023-04-04 11:14:04] tmbinc : (Grabbing and getting it out of IMU range doesn't work? That's how I "disable" mini2 for hand-landing without autoland)

[2023-04-04 11:14:23] tmbinc : I can look into Mini3pro limits, I was curious about that as well

[2023-04-04 15:35:44] brillio : brillio joined the channel.

[2023-04-04 18:22:04] gudvin : how does rollback work? Is this root access in which the rollback level changes? Or does the firmware file itself change before it is used?

[2023-04-10 20:58:39] scoobsteve : scoobsteve joined the channel.

[2023-04-11 15:44:33] blowfish448 : blowfish448 joined the channel.

[2023-04-13 16:11:41] flymymavic : RB is a number in the app that DJI put in, it cannot be removed or altered as the firmware is signed with an encryption key, which we dont have, trying to modify the firmware will result in a null key that the flashing system wont recognise and halt

[2023-04-13 19:04:37] tmbinc : Well... In more detail: the anti-rollback counter is a value that is stored in protected flash (RPMB on DJI silicon drones, FC-managed flash on IMXRT-based flight controllers like mini-(non-pro-)series). At upgrade installation time, when the .cfg xml file's signature is checked, the ARB in the CFG is validated against the local anti-replay counter. If it smaller, upgrade will be denied. The cfg xml is signed so we can't modify it without knowledge of the asymmetric private key (i.e. a key that is not present on the drone itself; only the public key, used to verify the signature, is there). However, it is only checked at _installation_ time. While the contents of the flash are signed as well, and verified at every boot, the ARB is only checked at installation time. This is what allows downgrades by messing with the verifier; you can use it to install old versions, but they have to be signed so you can't use that to flash custom stuff.

[2023-04-13 19:05:42] tmbinc : "root access" (on DJI silicon drones) allows you to mess with the verifier to ignore the replay value, and hence do a downgrade, but it doesn't allow you (easily) to change the replay value itself, since that's in RPMB and only trustzone has the key.

[2023-04-14 13:32:43] yutremalto : yutremalto joined the channel.

[2023-04-14 15:56:27] gudvin : thanks for the answer. it is very interesting. dronehack allows you to change any ARB for air2s, to the one needed for firmware 2040 (exploit?). So they know the key to overwrite the value of arb in RPMB memory?

[2023-04-14 15:58:10] lolo780 : Maybe a case of supply meets demand. Many air 2 users were stuck with incompatible firmware.

[2023-04-14 18:23:50] cs2000 : Technically, it doesn't change, it's bypassed.

[2023-04-19 09:17:47] tylkologin : tylkologin joined the channel.

[2023-04-22 12:40:13] k_k : kulkraus joined the channel.

[2023-04-23 17:34:33] cadbob : Been out of loop for awhile, I have Mavic Pro 1 with Firmware 1.04.0500 and Drone-Hack's FC loaded up fine. I was charging and checking batteries and DJGO4, I notice it is asking to update Precise Fly Safe Database. I choose to ignore for now till I here from experts that have been in the loop. Please let me know how to proceed and whats up with the Message from Go4.

[2023-04-23 17:34:33] cadbob : Been out of loop for awhile, I have Mavic Pro 1 with Firmware 1.04.0500 and Drone-Hack's FC loaded up fine.

[2023-04-23 17:35:31] lolo780 : Mavic Pro is still fun to fly.

[2023-04-23 17:42:15] cadbob : Yes getting warmer in NE USA so getting things ready :)

[2023-04-23 18:20:27] quad808 : Fly Safe Database is DJI's NFZ database and it will prompt you to update. If you are running CustomFC, it doesn't matter if you do or don't. Once you do, you can't go back, and will probably just get more warnings about NFZ, but won't affect CustomFC...but as always we recommend never letting DJI update anything on your drone once its hacked.

[2023-04-25 10:16:21] s1m0n : s1m0n joined the channel.

[2023-04-25 12:13:08] s1m0n : Can someone confirm that's not possible to flash original firmware files into Mini2 with DH 1.31? Tried over 50 times, no success. I bought a new drone especially for this reason. I was about to reset Windows. Then I found in the download folder still DH 1.29.. first attempt directly success

[2023-04-26 15:56:01] s1m0n : Does anyone have information about the following parameters? MM2..the search function did not result in any hits. Almost unbelievable, with all the knowledge that's in here

[2023-04-26 15:56:22] s1m0n : atti_gain [value: 190] atti_tilt_comp_gain [value: 1.300000] ang_vel_tilt_comp_gain [value: 40.000000] vert_vel_gain [value: 100]

[2023-04-28 10:10:31] supertester : supertester joined the channel.

[2023-04-30 19:35:14] flymymavic : So 1.31 fails to flash? Yet 1.29 works, that's interesting I can try it out later and let you know

[2023-05-02 00:38:47] alexbalestrin : alexbalestrin joined the channel.

[2023-05-02 15:51:40] zandan : zandan joined the channel.

[2023-05-03 05:41:01] sawman : sawman joined the channel.

[2023-05-04 14:39:45] jay : jay joined the channel.

[2023-05-05 15:42:41] theminer : theminer joined the channel.

[2023-05-06 14:21:11] sambuko : Sometimes I cant flash firmware to Mini 2 using drone hacks: After staring flash get Failed flash error: Rarely, after several attempts flashing success. Is it possible to fix it?

[2023-05-06 15:08:50] oakley75 : Try if version 1.29 works

[2023-05-08 22:56:12] andrej : andrej joined the channel.

[2023-05-09 20:31:42] s1m0n : I asked an AI about the parameters of the DJI Mini2. This is a preliminary list. If anyone sees any errors or knows of any additions, please let me know

[2023-05-09 20:37:37] s1m0n : ```# ESC multi_esc_type // Could refer to the type of ESCs used (Electronic Speed Controllers) in a multi-motor aircraft # Function keys/channels // These names could refer to the function keys of a remote control or a control panel, each assigned to a certain channel or a certain function. F_CHL_F1 F_CHL_F2 F_CHL_F3 F_CHL_F4 F_CHL_F5 F_CHL_F6 F_CHL_F7 F_CHL_F8 # Digi Channel F_CHL_D_FREQ // could refer to the frequency of a digital channel or a digital transmission. // These parameters refer to the maximum and minimal pulse width of the impulses for the digital channels (D1-D8) of an RC receiver F_CHL_D1_MAX_WIDTH F_CHL_D1_MIN_WIDTH F_CHL_D2_MAX_WIDTH F_CHL_D2_MIN_WIDTH F_CHL_D3_MAX_WIDTH F_CHL_D3_MIN_WIDTH F_CHL_D4_MAX_WIDTH F_CHL_D4_MIN_WIDTH F_CHL_D5_MAX_WIDTH F_CHL_D5_MIN_WIDTH F_CHL_D6_MAX_WIDTH F_CHL_D6_MIN_WIDTH F_CHL_D7_MAX_WIDTH F_CHL_D7_MIN_WIDTH F_CHL_D8_MAX_WIDTH F_CHL_D8_MIN_WIDTH # Mode/Output F_CHL_MODE // is a parameter that describes the mode of the recipient of a drone F_CHL_SHUTTER_ACTIVE_OUTPUT // determines whether the trigger is triggered at a high (1) or low (0) signal F_CHL_SHUTTER_DEFAULT_OUTPUT // Determines which condition at the output of the channel is by default if no trigger signal is sent F_CHL_SHUTTER_FREQ // determines the frequency of the trigger signal in Hertz (Hz) F_CHL_SHUTTER_MS // determines the length of the trigger signal in milliseconds (MS) # Farm Channel // Probably belong to a PWM signal on one of the channels of a flight controller."F_CHL_FAMM" could an abbreviation for "farm fashion".The "Max_Width" and "Min_Width" parameter define the maximum and minimal width of the PWM signal, while "Freq" determines the frequency of the signal F_CHL_FARM_MAX_WIDTH F_CHL_FARM_MIN_WIDTH F_CHL_FARM_FREQ # Video Channel F_CHL_VIDEO_FREQ // The frequency for the video channel F_CHL_VIDEO_DEFAULT_OUTPUT // The standard edition for the video channel F_CHL_VIDEO_ACTIVE_OUTPUT // The active output for the video channel # Pause Channel F_CHL_PAUSE_FREQ // The frequency for the pause channel F_CHL_PAUSE_DEFAULT_OUTPUT // The standard edition for the pause channel F_CHL_PAUSE_ACTIVE_OUTPUT // The active output for the pause channel # PWM Signal F_CHL_PWM_SETTING_FREQ // The frequency with which the PWM settings are transferred # Duty-Cycle // for channels (C1-C8) to be defined. A duty cycle ratio describes the ratio of the pulse duration to the total period duration of a periodic signal F_CHL_C1_DUTY_RATIO F_CHL_C2_DUTY_RATIO F_CHL_C3_DUTY_RATIO F_CHL_C4_DUTY_RATIO F_CHL_C5_DUTY_RATIO F_CHL_C6_DUTY_RATIO F_CHL_C7_DUTY_RATIO F_CHL_C8_DUTY_RATIO # Sweep sweep_test_flag // A flag that shows whether a "Sweep test" is activated or not.A Sweep test is a kind of test in which a variable frequency or amplitude is underway to measure the reaction of a system sweep_test_method // The method used for the Sweep test.This means what type of sweep test is carried out sweep_inj_A_enable // A flag that shows whether the injection of Signal A is activated or not sweep_inj_B_enable // A flag that indicates whether the injection of Signal B is activated or not sweep_total_t_A(PRBS_period) // The total duration in which Signal A is sent during the PRBS test sweep_total_t_B // The total duration in which signal B is sent during the PrBS test sweep_start_f_A(PRBS_dt) // The start frequency of signal A during the PrBS test sweep_start_f_B // The start frequency of signal B during the PrBS test sweep_stop_f_A(PRBS_N) // The stop frequency of signal A during the PrBS test sweep_stop_f_B // The stop frequency of Signal B during the PrBS test sweep_amp_A // The amplitude of Signal A during the test sweep_amp_B // The amplitude of Signal B during the test sweep_prbs_total_t_A // The total duration in which the PRBS signal A is sent during the test sweep_prbs_amp_A // The amplitude of the PrBS signal A during the test sweep_prbs_scaler_A // A scaling factor for the PRBS signal A sweep_prbs_reg_L_A // The low 32-bit part of the register for the PRBS signal A sweep_prbs_reg_M_A // The high 32-bit part of the register for the PRBS signal A vel_smooth_time // Period over which the speed smoothing is carried out g_cfg_debug.overshot_enable // Activation of the error estimate in the control system multi_mixer_type|g_config.aircraft.multi_rotor_type // type of multirotor, e.g. quadrocopter, hexacopter, etc. basic_gain_roll_usr|g_config.control.basic_roll // Base roller setting basic_gain_pitch_usr|g_config.control.basic_pitch // Base sewing setting g_config.control.basic_tail|g_config.control.basic_yaw // Rear setting g_config.control.atti_vertical|g_config.control.basic_thrust // Basic thrust setting atti_gain // This is the gain value for the transport integrator atti_tilt_comp_fc // The cut-off frequency for the Attitude-Tilt compensator atti_tilt_comp_gain // This is the gain value for the Attitude-Tilt compensator ang_vel_tilt_pi_freq // The cut-off frequency for the Angle Velocity-Tilt-Pi controller ang_vel_tilt_comp_fc // The cut-off frequency for the Angle-Velocity-Tilt compensator power_bandwidth // The power bandwidth for the power controller ang_vel_tilt_comp_gain // The gain value for the Angle Velocity-Tilt compensator g_config.mr_ctrl.ctrl_lowpass_fstop // LowPass filtering corner frequency g_config.mr_ctrl.ctrl_lowpass_astop // LowPass filtering stop damping g_config.mr_ctrl.ctrl_lowpass_adj // lowpass_ filtering filter horiz_pos_gain|g_config.control.horiz_pos_p_gain_adj // refers to the horizontal position controller and is used to adjust the proportional share of the controller horiz_vel_gain|g_config.control.horiz_vel_p_gain // refers to the horizontal speed controller vert_vel_gain // On the vertical speed controller, the proportional parts of the respective controller g_config.mr_ctrl.prop_cover_en // is a parameter that indicates whether the propeller of the multirotor is covered by a cover.If the value is set to 1, it is assumed that the propeller is covered, and the flight control system can take this into account when controlling the multirotor.If the value is set to 0, it is assumed that the propeller is not covered mass_center_calibrated // Could be a parameter that shows whether the mass center of the aircraft has already been calibrated or not mass_center_collecting_time_s //is a parameter that represents the time in seconds that is used for measuring the mass center of the aircraft.It can also be described as the time duration required for the calibration of the aircraft vps_func_en|g_config.mvo_cfg.mvo_func_en // Switches on or off the visual positioning function disable_tof_if_close_vps|NULL // Deactivates the time-of-flight sensor (TOF) when the optical VPS is close enough to the surface is_locked|g_config.device.is_locked //Indicates whether the device is blocked or not // Error simulation for the FDI system (Fault Detection and Identification) # Acc (Accelerometer) acc_fdi_open_disconnect // Simulation of an interruption or separation of the connection between the sensor and the system acc_fdi_open_range // Simulation of a faulty measurement that is outside the expected measuring range of the sensor acc_fdi_open_abrupt // Simulation of an abrupt transition or outlier in the measurement of the sensor acc_fdi_open_noise // Simulation of disorders or noise in the measurement of the sensor acc_fdi_open_stuck // Simulation of a measurement that gets stuck at a certain measurement or is not updated acc_fdi_open_bias // Simulation of a measurement deviation or a systematic error in the measurement of the sensor acc_fdi_open_temper // Simulation of a temperature error in which the sensor performance changes due to temperature changes acc_fdi_open_disagree // Simulation of an objection or a discrepancy between the measurements of the sensor and other sensors in the system acc_fdi_open_invalid_float // Simulation of an invalid or unexpected assembly comma surgery acc_fdi_open_cali_err // Simulation of an invalid or unexpected assembly comma surgery acc_fdi_open_drv_err // Simulation of a driver error or a software error that affects the sensor acc_fdi_open_temp_not_ready // Simulation of a non -operating sensor due to a change in temperature # Gyr (Gyrometer) gyr_fdi_open_disconnect // " gyr_fdi_open_range // " gyr_fdi_open_abrupt // " gyr_fdi_open_stuck // " gyr_fdi_open_noise // " gyr_fdi_open_bias // " gyr_fdi_open_bias_minor gyr_fdi_open_temper // " gyr_fdi_open_disagree // " gyr_fdi_open_invalid_float // " gyr_fdi_open_temp_not_ready // " gyr_fdi_open_temp_warnning gyr_fdi_open_temp_high gyr_fdi_open_temp_ctrl_err # Barometer baro_fdi_open_disconnect // " baro_fdi_open_range // " baro_fdi_open_abrupt // " baro_fdi_open_stuck // " baro_fdi_open_noise // " baro_fdi_open_walk baro_fdi_open_temper // " baro_fdi_open_temp_warnning baro_fdi_open_temp_high baro_fdi_open_temp_low baro_fdi_open_disagree // " baro_fdi_open_invalid_float // " # Compass compass_fdi_open_disconnect // " compass_fdi_open_over_minor compass_fdi_open_over_large compass_fdi_open_abrupt // " compass_fdi_open_stuck // " compass_fdi_open_noise // " compass_fdi_open_disagree // " compass_fdi_open_interfere # GPS gps_fdi_open_disconnect // " gps_fdi_open_range // " gps_fdi_open_abrupt // " gps_fdi_open_stuck // " gps_fdi_open_disagree // " gps_fdi_open_conformity gps_fdi_open_invalid_float // " gps_fdi_open_version_mismatch gps_fdi_open_frequency_err gps_fdi_open_signature_invalid gps_fdi_open_svn_exception gps_fdi_open_level_low gps_fdi_open_height_drift # Real-Time Kinematic rtk_fdi_open_disconnect // " rtk_fdi_open_range // " rtk_fdi_open_offset_switched rtk_fdi_open_freq_err rtk_fdi_open_invalid_float // " rtk_fdi_open_stuck // " rtk_fdi_open_abrupt_pos rtk_fdi_open_abrupt_vel rtk_fdi_open_height_consist rtk_fdi_open_pos_disagree rtk_fdi_open_conformity rtk_fdi_open_pos_disagree_large rtk_fdi_open_pos_change_static rtk_fdi_open_vel_change_static rtk_fdi_open_version_unmatched rtk_fdi_open_station_switched rtk_fdi_open_station_tilt rtk_fdi_open_station_not_static rtk_fdi_open_yaw_disagree rtk_fdi_open_baseline_not_match # Motor motor_fdi_open // Probably refers to a general FDI for engines that aim at different types of errors motor_kf_fdi_open // Probably refers to an FDI that uses a Kalman filter (KF) to identify and insulate errors in the engine control motor_rls_fdi_open // Probably refers to an FDI that uses a recursive Least-Squares algorithm (RLS) to identify and insulate errors in the engine control motor_esc_fdi_open // Probably refers to an FDI that aims to use electronic speed controllers (Electronic Speed Controllers, ESCS) connected to the engines. motor_ctrl_fdi_open // Probably refers to an FDI that focuses on the control of the engine itself, including the power supply, the speed control and other factors # ESC esc_unbalance_fdi_open // Possible errors due to unbalance in the ESC esc_ppm_recv_fdi_open // Possible errors due to disorders when receiving control signals by ppm (pulse position modulation) esc_recv_test_fdi_open // Possible errors due to problems when testing the ESCs # Error Detection ahrs_fdi_open // Error detection for the Attitude Heading Reference System (AHRS), which is responsible for determining the orientation of the aircraft in the room ahrs_init_fdi_open // Error detection for problems in the initialization of the AHRS system geo_mag_fdi_open // Error detection for problems with the magnetometer and the geographical orientation of the aircraft ctrl_fdi_open // Error detection for general problems with flight control ctrl_impact_fdi_open // Error detection for bumps or impact that can affect the aircraft g_config.fdi_open.ctrl_vibrate_fdi_open // Error detection for vibrations in the flight control system acc_multi_fdi_open // Error detection for the accelerometer (accelerometer) gyro_multi_fdi_open // Error detection for the roundabout sensor (gyroscope) baro_multi_fdi_open // Error detection for the barometer sensor (barometer) compass_multi_fdi_open // Error detection for the compass sensor (magnetometer) gps_multi_fdi_open // Error detection for the GPS sensor ns_multi_fdi_open // Error detection and treatment for the navigation system as a whole ns_multi_w_fdi_open // Error detection and treatment for the angle speed data ns_multi_ag_fdi_open // Error detection and treatment for the acceleration data ns_multi_vg_fdi_open // Error detection and treatment for the speed data ns_multi_alti_fdi_open // Error detection and treatment for the height data ns_multi_pos_fdi_open // Error detection and treatment for the position data ns_multi_eular_fdi_open // Error detection and treatment for the Euler-Winkel data imu_module_install_open // Error opening the IMU module mag_dis_stop_fly // Flight stopped due to magnetometer problems g_config.fdi_open.fit_open // Error opening of fit g_config.fdi_open.without_gps_allowed // GPS not required g_config.fdi_open.without_mag_allowed // Magnetometer not required g_config.fdi_open.close_auto_stop_motor_check // No shutdown of the engines if the drone is inclined by more LS 85 ° from the horizontal position (0 = off, 1 = on) # Ultrasonic auto_echo_function_open // possibly together in connection with the processing of ultrasound signals ultrasonic_fdi_open_stuck // could mean that the ultrasonic sensor has been blocked or got stuck ultrasonic_fdi_open_disconnect // Probably means that the ultrasonic sensor no longer has a connection to the control unit. # Vision-System, Visual Tracking ? vo_fdi_open_disconnect // Error message that is issued when the connection between the drone and the visual positioning system (VPS) breaks off vo_fdi_open_range // Error message that is issued when the VPS system measures an unusually large distance to the floor surface vo_fdi_open_abrupt // Error message that is issued when the speed of the drone suddenly and unexpectedly breaks off vo_fdi_open_invalid_float // Error message that is issued when the VPS system returns invalid data vo_fdi_open_height_consist // Error message that is issued when the VPS system returns inconsistent height data vo_fdi_open_vel_large_in_static // Error message that is issued when the speed of the drone is too high in a static position vo_fdi_open_vel_large_on_ground // Error message that is issued when the speed of the drone is too high on the ground vo_fdi_open_stuck_pos // Error message that is issued when the drone gets stuck in one position and does not move vo_fdi_open_stuck_vel // Error message that is issued when the speed of the drone remains unexpectedly low even though it should move # FIT rns_fit_enable // With this parameter, the "Fixed Ince Technology" (FIT) of the R-R-RTK navigation system can be activated or deactivated.If it is activated, the position and orientation of the drone are determined using satellite signals and ground stations with high accuracy rns_fit_dev_code // This parameter specifies the developer code of the R-RTK navigation system with which the drone is connected rns_fit_err_code // The error code of the R-R-R-R-R-R-R-R-RTK navigation system is displayed here.If this parameter has a value much zero, a problem with the system may have occurred rns_fit_in_air // This parameter shows whether the drone is in the air or not.If it has a value much zero, the drone is in the air ```

[2023-05-09 20:40:21] s1m0n : ```g_config.fdi_switch.open // This parameter indicates whether the FDI control is activated or deactivated.If the "Open" parameter is set to "1", the FDI control is activated.If it is set to "0", the FDI control is deactivated g_config.fdi_switch.ns.default_index // This parameter specifies the standard index for the FDI parameter control.If no specific parameters for the FDI control have been set, the standard parameters with this index are used g_config.fdi_switch.ns.with_fdi // This parameter indicates whether the FDI control is activated when an error diagnostic event is recognized.If this parameter is set to "1", the FDI control is activated when an FDI is recognized.If it is set to "0", the FDI control remains deactivated g_config.fdi_switch.ns.by_fdi // This parameter indicates whether the FDI control is triggered by a specific FDI event.If this parameter is set to "1", the FDI control is only triggered if a certain FDI event is recognized.If it is set to "0", the FDI control is triggered by any FDI event g_config.fdi_switch.ns.random_test // This parameter indicates whether a random test for the FDI control should be carried out.If this parameter is set to "1", a random test is carried out to ensure that the FDI control works properly.If it is set to "0", no random test is carried out g_config.fdi_switch.compass.default_index // This parameter specifies the standard index for the FDI parameter control.If no specific parameters for the FDI control have been set, the standard parameters with this index are used g_config.fdi_switch.compass.with_fdi // " g_config.fdi_switch.compass.by_fdi // " g_config.fdi_switch.compass.random_test // " g_config.fdi_switch.gps.default_index // " g_config.fdi_switch.gps.with_fdi // " g_config.fdi_switch.gps.by_fdi // " g_config.fdi_switch.gps.random_test // " g_config.fdi_switch.baro.default_index // " g_config.fdi_switch.baro.with_fdi // " g_config.fdi_switch.baro.by_fdi // " g_config.fdi_switch.baro.random_test // " g_config.fdi_switch.acc.default_index // " g_config.fdi_switch.acc.with_fdi // " g_config.fdi_switch.acc.by_fdi // " g_config.fdi_switch.acc.random_test // " g_config.fdi_switch.gyro.default_index // " g_config.fdi_switch.gyro.with_fdi // " g_config.fdi_switch.gyro.by_fdi // " g_config.fdi_switch.gyro.random_test // " SIM_GPS_DATE // It indicates the current date received by the GPS software.The parameter is usually updated automatically when the drone is synchronized with the GPS signal.If the parameter is wrong or outdated, this can lead to inaccurate GPS coordinates and time stamps g_status.acc_gyro[0].cali_cnt|imu_app_temp_cali.cali_cnt // This parameter indicates how often the calibration was carried out for the first accelerometer and gyroscope g_status.acc_gyro[0].state|imu_app_temp_cali.state // This parameter specifies the current status of the first accelerometer and gyroscope g_status.acc_gyro[0].temp_ready|imu_app_temp_cali.temp_ready // This parameter indicates whether the temperature measurement for the first accelerometer and gyroscope is complete g_status.acc_gyro[1].cali_cnt // This parameter indicates how often the calibration was carried out for the second accelerometer and gyroscope g_status.acc_gyro[1].state // This parameter specifies the current status of the second accelerometer and gyroscope g_status.acc_gyro[1].temp_ready // This parameter indicates whether the temperature measurement for the second accelerometer and gyroscope is complete g_status.acc_gyro[2].cali_cnt // This parameter indicates how often the calibration was carried out for the third accelerometer and gyroscope g_status.acc_gyro[2].state // This parameter specifies the current status of the third accelerometer and gyroscope g_status.acc_gyro[2].temp_ready //This parameter indicates whether the temperature measurement for the third accelerometer and gyroscope is complete g_status.all_gyr_acc.need_cali_type // This parameter could indicate the type of calibration for IMU if the IMU has inaccuracies.However, it is difficult to say because I don't know what "need_cali_type" means without knowing the context of the software g_status.all_gyr_acc.msc_sampled_side // This parameter could indicate which side of the IMU the magnetometer for the magnetometer scale factor correction (MSC) is scanned.For example, it could be "0" for the left side and "1" for the right side g_status.all_gyr_acc.msc_current_side // This parameter could indicate which side of the IMU the magnetometer for the magnetometer scale factor correction (MSC) is scanned.For example, it could be "0" for the left side and "1" for the right side g_status.all_gyr_acc.cali_cnt // This parameter could indicate the number of calibration runs carried out for the IMU g_status.all_gyr_acc.cali_state // This parameter could indicate the current status of the calibration for the IMU, e.g.B. "calibration runs", "calibration completed" or "calibration failed" g_status.topology_verify.user_interface.imu_status // For example, the current status of the IMU could display on the user interface of the drone g_status.topology_verify.user_interface.mag_status // could display the current status of the magnetometer.Both parameters could indicate whether the sensors work properly or whether there are problems with them g_status.mag_adv_cali_status[0].process // This parameter probably specifies which progress step is carried out in the first calibration process.For example, this can be "sampling" or "adaptation" g_status.mag_adv_cali_status[0].status // This parameter probably specifies the current status of the first calibration process.For example, the status can be "ok" or "faulty" g_status.mag_adv_cali_status[0].item // This parameter probably specifies which step of the first calibration process is carried out.This can be, for example, "1D calibration" or "3D calibration" g_status.mag_adv_cali_status[1].process // This parameter probably specifies which progress step is carried out in the second calibration process g_status.mag_adv_cali_status[1].status // This parameter probably specifies the current status of the second calibration process g_status.mag_adv_cali_status[1].item // This parameter probably specifies which step of the second calibration process is carried out g_status.mag_adv_cali_status[2].process // This parameter probably specifies which progress step is carried out in the third calibration process g_status.mag_adv_cali_status[2].status // This parameter probably specifies the current status of the third calibration process g_status.mag_adv_cali_status[2].item // This parameter probably specifies which step of the third calibration process is carried out g_status.have_mag_adv_para_flag // This parameter may indicate whether extended magnetometer parameters are available in a certain hardware or software.For example, it can be a flag that is set to (true) if extended magnetometers parameter are available, and on (false), if not g_status.exgps0_hw_type // This parameter may indicate the hardware type of the external GPS device, which is connected or is used in certain hardware or software.For example, it can be a code for a specific GPS manufacturer or a specific GPS model g_status.exgps1_hw_type // This parameter could also specify the hardware type of another external GPS device if more than one GPS device is connected or used g_status.exgps2_hw_type // This parameter could also specify the hardware type of another external GPS device if a third GPS device is connected or used g_config.fdi_sensor[0].acc_bias // This parameter specifies the acceleration sensor bias value for the first sensor in the system g_config.fdi_sensor[0].gyr_bias // This parameter specifies the gyrosensor bias value for the first sensor in the system g_config.fdi_sensor[0].mag_over // This parameter may indicate whether a magnetometer overload protection is activated for the first sensor in the system g_config.fdi_sensor[0].acc_stat // This parameter may indicate the status of the acceleration sensor for the first sensor in the system g_config.fdi_sensor[0].gyr_stat // This parameter may indicate the status of the gyrosensor for the first sensor in the system g_config.fdi_sensor[0].mag_stat // This parameter may indicate the status of the magnetometer for the first sensor in the system g_config.fdi_sensor[1].acc_bias // g_config.fdi_sensor[1].gyr_bias // g_config.fdi_sensor[1].mag_over // g_config.fdi_sensor[1].acc_stat // g_config.fdi_sensor[1].gyr_stat // g_config.fdi_sensor[1].mag_stat // g_config.fdi_sensor[2].acc_bias // g_config.fdi_sensor[2].gyr_bias // g_config.fdi_sensor[2].mag_over // g_config.fdi_sensor[2].acc_stat // g_config.fdi_sensor[2].gyr_stat // g_config.fdi_sensor[2].mag_stat // // These are parameters that state the standard deviation of the modeling errors for the three magnetometers axes.The modeling errors are deviations between the actual measurements of the magnetometer and the theoretical models of the magnetic field of the earth.A higher standard deviation means that the modeling errors are larger and the magnetometers are less calibrated mag0_mod_stdvar mag1_mod_stdvar mag2_mod_stdvar // These parameters indicate the modeling errors for the three magnetometers axes.They are a measure of the deviation of the actual measurements of the magnetometer from the theoretical models of the magnetic field of the earth.A low modeling error means that the magnetometers are calibrated more precisely mag0_mod mag1_mod mag2_mod // These parameters indicate whether large measurement errors for the three magnetometers axes have been recognized.If this value is set to 1, this means that the magnetometer has large measuring errors for this axis and may have to be calibrated again mag0_noise_large_flag mag1_noise_large_flag mag2_noise_large_flag # Navigation System g_status.ns_busy_dev // This parameter indicates whether the aircraft is currently busy with a navigation system.If this value is set to 1, this means that the aircraft is currently carrying out a navigation maneuver and cannot be controlled in the near future # Info g_status.user_info.statistical_info.total_distance // This parameter has specified the overall flight route of the aircraft since the first start.(in m/1000) g_status.user_info.statistical_info.total_motor_start_time // This parameter specifies the total time that the aircraft engines have run since the first start.(in S/3600) g_status.user_info.statistical_info_last.total_distance // This parameter specifies the overall flight route of the aircraft since the last restart of the aircraft (in M) g_status.user_info.statistical_info_last.total_motor_start_time //This parameter indicates the total time that the aircraft engines have run since the last restart of the aircraft (in S) # Battery g_status.battery.raw_info.capacity_percentage // Battery indicator (in %) battery_status // This parameter specifies the current status of the aircraft's battery.The status can have different values such as "normal", "too cold", "too hot" or "weak".This parameter can be used for monitoring the battery state to ensure that the battery works within safe operating conditions motor_fail_for_mission_degrade_en // This parameter activates or deactivates the function of the aircraft, in which an engine failure results in a devaluation of the mission during a mission.If this parameter is activated, the aircraft will end the mission during a motor failure during a mission or return to a safe place instead of continuing the mission fc_dark_need_gps // Is a parameter that indicates whether the flight control system is dependent on GPS in the dark or not.If the value is "1", the system needs GPS to function prop_abnormal_test // is a parameter used in a propeller overload test function.If the value is "1", the test is executed # Warning prop_abnormal_flag // Is a parameter that indicates whether there is a problem with the propellers or not.If the value is "1", this means that a problem has been determined tempvar_switch_gear|g_config.gear_cfg.gear_func_en // is a parameter that controls the switching function for flight speed settings.If the value is "1", the function is activated intel_gear|g_config.gear_cfg.auto_control_enable // Is a parameter that specifies whether the aircraft can automatically regulate its flight speed or not.If the value is "1", it can automatically adjust the speed hide_gear_en|g_config.gear_cfg.hide_gear_en // is a parameter that controls the visibility of the aircraft's legs.If the value is "1", they will be hidden # Warning near_ground_reminder|g_config.gear_cfg.near_ground_reminder // controls the pilot's warning when the plane is near the floor.If the value is set to "1", a warning is displayed to point out the pilot that the aircraft is located near the floor and the flight height should be increased # RC Switch fswitch_selection|g_config.control.control_mode[0] // RC Normal fswitch_selection_1|g_config.control.control_mode[1] // RC Tripod fswitch_selection_2|g_config.control.control_mode[2] // RC Sport avoid_atti_range // This parameter is responsible for limiting the area of the angle of attachment within which the drone can be controlled to prevent crashes wind_anti_intensity|g_config.control.wind_anti_intensity // This parameter regulates the sensitivity of the wind resistance in the drone.The higher the value, the stronger the drone is resistant to wind brake_sensitive_fc|g_config.control.brake_sensitivity_fc // This parameter influences how quickly the drone slows down when you let go of the gas lever quickly.The higher the value, the faster the drone brakes brake_sensitive_gain|g_config.control.brake_sensitivity // This parameter has a similar effect to the previous parameter, but influences braking behavior when the drone is controlled in the air emergency_brake_sensitive // This parameter determines the sensitivity of the drone compared to emergency braking.If it is set higher, the drone will slow down faster and more if an emergency braking is required vert_vel_down_adding|g_config.control.vert_vel_down_adding // This parameter is responsible for controlling the vertical downward speed.A higher value increases the downward speed ???? vert_vel_down_adding_max // This parameter defines the maximum ratio between the vertical downward speed and the horizontal speed # Gimbal g_config.misc_cfg.gimbal_priority_en // This parameter activates the prioritization of the camera gimbal stabilization.If the value is set to 1, the gimbal is stabilized in certain flight states ffg_speed_ctrl_perc|g_config.control.ffg_speed_ctrl_perc // This parameter defines the maximum horizontal speed in normal flight mode in percent of the maximum horizontal speed sport_ffg_speed_ctrl_perc|g_config.control.sport_ffg_speed_ctrl_perc // This parameter defines the maximum horizontal speed in sports flight mode in percent of the maximum horizontal speed trip_ffg_speed_ctrl_perc|g_config.control.trip_ffg_speed_ctrl_perc // This parameter defines the maximum horizontal speed in trip flight mode in percent of the maximum horizontal speed # Gimbal g_config.misc_cfg.follow_gimbal_yaw_when_watch|g_cfg_debug.follow_gimbal_yaw_when_watch // gimbal_priority_flight_tilt // A parameter that controls the plane's inclination to ensure a preferred alignment of the camera on the gimbal.A higher value increases the tendency gimbal_tilt_max // A parameter that controls the maximum inclination of the gimbal.A higher value increases the maximum inclination quick_circle_tors_rate_limit // A parameter that limits the maximum rotary speed of the aircraft for fast curve maneuvers.A lower value limits the speed ```

[2023-05-09 20:44:30] s1m0n : ``` # Brake dynamic_brake_atti_enable // A parameter that controls the activation of the dynamic brake when the plane has a high inclination.A higher value increases sensitivity and activation frequency brake_scale_in_min_vel // This parameter controls the brake factor at a minimum speed brake_scale_in_max_vel // This parameter controls the brake factor at a maximum speed brake_atti_limit_min_vel // This parameter controls the minimum speed at which the brake function is activated brake_atti_limit_max_vel // This parameter controls the maximum speed at which the brake function is activated brake_scale_in_high_altitude // This parameter controls the brake factor at high height down_vel_scale_in_high_altitude // This parameter controls the relegation speed factor at high height # Beta Flight beta_flight_function_enable // The "beta_flight_function_enable" parameter activated or deactivates special flight functions that may still be in the test or beta phase.These are usually experimental functions that are not available in the stable version of the software or are not intended for public use.The activation of this parameter can lead to the drone becoming unstable or unpredictable behavior, so it should only be used by experienced users who know what they do # Modus mit Propellerabdeckung prop_cover_cfg.rc_scale // prop_cover_cfg.tilt_atti_range // prop_cover_cfg.tors_gyro_range // prop_cover_cfg.vert_vel_up // prop_cover_cfg.vert_vel_down // prop_cover_cfg.tilt_exp_mid_point // prop_cover_cfg.tors_exp_mid_point // prop_cover_cfg.lift_exp_mid_point // # Sensor g_config.avoid_obstacle_limit_cfg.avoid_obstacle_enable // A parameter that controls whether the drone automatically detects and avoids obstacles if this value is set to 1 # Avoid user_avoid_enable|g_config.avoid_obstacle_limit_cfg.user_avoid_enable // A parameter that controls whether the user can manually avoid obstacles if this value is set to 1 safe_dis // A parameter that indicates the safe removal of the drone of obstacles in meters avoid_cfg_rc_scale|g_config.avoid_cfg.avoid_rc_scale // A parameter that controls the reaction speed of the drone on obstacles avoid_cfg_tors_rate_range|g_config.avoid_cfg.avoid_tors_rate_range // A parameter that controls the rotation speed of the drone when avoiding obstacles novice_func_enabled|g_config.novice_cfg.novice_func_enabled // A parameter that controls whether beginner functions such as "return-to-home" and maximum flight height limits are activated low_radius_limit_enable // A parameter that controls whether the drone complies with a minimal distance to an obstacle if this value is set to 1 # App Controll g_config.flying_limit.max_radius // Removal boundary (in m) g_config.flying_limit.max_height // Limitation of height (in m) g_config.flying_limit.radius_limit_enabled|g_config.advanced_function.radius_limit_enabled // Indicates whether a distance limit is activated for the flight g_config.flying_limit.min_height // The minimal flight altitude in meters that can be reached by the drone min_height_user // The minimal flight height (1 = less centimeters above ground - caution) # Sensor g_config.flying_limit.user_avoid_ground_enable // Indicates whether the drone should avoid the floor (floor sensor 1 = on, 2 = off) # Landing g_config.flying_limit.avoid_ground_and_smart_landing_enable // Indicates whether the drone should avoid the floor and land automatically (floor sensor 1 = on, 0 = off handlanding) limit_height_rel // The relative height from which the distance limit is applied g_config.flying_limit.roof_limit_enable // Indicates whether the altitude limit is restricted by the presence of buildings or other obstacles flying_limit_info_share_limit_enbaled // Indicates whether the flight limit information should be shared flying_limit_water_low_limit_enable // Indicates whether the water height limit is activated # Modus mit Propellerabdeckung prop_cover_limit_enable // A flag that specifies whether a limit was set for the use of propeller covers prop_cover_limit_radius_max // The maximum radius (in meters), within whose propeller covers may be used prop_cover_limit_alt_max // The maximum flight height (in meters) in which propeller covers may be used # GPS gps_enable|g_config.gps_cfg.gps_enable // A flag that indicates whether the GPS system is activated or not # LEDs forearm_led_ctrl|g_config.misc_cfg.forearm_lamp_ctrl // Enables the lighting (0 = all LEDs off, 1 = only front, 4 = only back, 5 = all LEDs off) # App Controll front_led_customize_rgb // Allows the RGB colors to be adjusted for the drone front LEDs.Color codes in hexadenzimal code (0 = black/off, 12174269 = white, 2263801 = orange, 57087 = yellow, 4587460 = Lemon, 1684288 = green, 16769641 = Babyblue, 16745233 = Blue, 14888301 = purple, 14109113 = Pink) front_led_customize_mode // Enables the adjustment of the light mode for the front LEDs of the drone (0 = from (app), 1 = static (app), 2 = breathing (app), 3 = blink, 4 = blink fast, 5 = rainbow (app)) # Fallback Gentle? tilt_sensitive_gain|g_config.control.rc_tilt_sensitivity // This parameter controls how sensitively the drone reacts to tendencies of the tax stick that change the inclination of the copter yaw_sensitive_gain // This parameter controls how sensitively the drone reacts to rotations of the control stick, which change the rotation of the copter around the vertical axis rc_throttle_sensitivity // This parameter controls how sensitively the drone reacts to the gas leverage position mounting_type|g_config.topology_verify.single_mult_controller // This parameter indicates whether the drone is set up as a single or multiple controller configuration # Sensor g_config.gyr_acc_cfg.msc_require_side // This parameter indicates which side of the drone should be used to calculate acceleration and rotation # Gimbal g_config.misc_cfg.follow_gimbal_yaw_en // This parameter activates or deactivates the tracking of the camera gimbal orientation by the drone follow_gimbal_yaw_sport // This parameter activates or deactivates the sports mode for the tracking of the camera gimbal orientation by the drone (1 = stock, 0 = no tilt movement in sports mode) follow_gimbal_yaw_with_offset_en // This parameter activates or deactivates the possibility of determining an offset inclination for the tracking of the camera gimbal orientation by the Kopter # Quick Circle quick_circle_enable // This parameter activates or deactivates the Quick Circle function, which enables a quick circular flight around an object # App Controll / Gimbal gimbal_fpv_mode_enable // This parameter activates or deactivates the FPV mode for the camera gimbal orientation (0 = off, 1 = on) # Quick Circle g_config.mr_sa_quick_spin_cfg.quick_circle_auto_en // Activate Quick Circle automatically g_config.mr_sa_quick_spin_cfg.quick_circle_manual_en // Activate Quick Circle manually plant_gain_uncer_comp_enable // plant_gain_voltage_comp_enable // terrain_following_type // Off -road terrain_vel_comp_gain // Running speed compensation reinforcement radar_slope_confidence_level0 // Radar negligence level 0, describes how safe you can rely on the data and information provided by the radar radar_slope_confidence_level1 // Radar negligence level 1, how safe you can rely on the data and information provided by the radar # Failsafe rc_lost_action|g_config.fail_safe.protect_action // Protective measures in the event of a signal loss of the remote control (0 = floating 1 = sinking 2 = go home) hover_pwm_bound_threshold // Threshold for floating point PWM enable // ???? # Simulator SIM_FLY_LIMIT_ENABLE // Controls whether the flight limit is activated in the simulator cfg_sim_disable_limit|g_config.airport_limit_cfg.cfg_sim_disable_limit // Konfiguration, um das Fluglimit im Simulator zu deaktivieren user_test_actuator // Activates the actuator test mode user_test_std_output|g_config.actuator.user_test.std_output // Configuration of the standard edition of the actuator test user_test_timer // Configuration des actuator testimers # ESC user_test_esc_factory_test // Activates the ESC workshop test mode # Battery battery_type // The type of battery used for the drone model (blocked) enSmartBatGH|g_config.voltage2.user_set_smart_bat // An setting for activating the automatic return to the home function with a low battery stand.Also for Custom Batterys ??(0 = disable autolanding at 0%, 1 = (non-dji?) 2 = stock (smart dji ??) # Warning dji_bat_level_1|g_config.voltage2.level_1_voltage // A threshold for the battery voltage, which is used as a limit for the first level of protection against unloading (in %,> raw_bat_level_1 | g_config.voltage.level_1_protect) dji_bat_level_2|g_config.voltage2.level_2_voltage // A threshold for the battery voltage, which is used as a limit for the second level of protection against unloading (in %> raw_bat_level_2 | g_config.voltage.level_2_protect) # Battery bat_cap_v1_prot_type|g_config.voltage2.level_1_function // A protective mode for the first protective level if the threshold is below the threshold for the battery voltage (0 = stock) bat_cap_v2_prot_type|g_config.voltage2.level_2_function // A protective mode for the second protective level if the threshold is below the threshold for the battery voltage (0 = disable force autolanding at critical voltage? 2 = stock) raw_battery_cell_num|g_config.voltage.battery_cell // The number of cells in the battery raw_bat_level_1|g_config.voltage.level_1_protect // The threshold value for the battery voltage, which is used as a limit for the first level of protection against unloading (in mah,> dji_bat_level_1 | g_config.voltage2.level_1_voltage) raw_bat_level_2|g_config.voltage.level_2_protect // The threshold value for the battery voltage, which is used as a limit for the second level of protection against unloading in mah,> dji_bat_level_2 | g_config.voltage2.level_2_voltage) bat_level_1_action|g_config.voltage.level_1_protect_type // The protective mode for the first protective level when the threshold is below the threshold for the battery voltage # RTH bat_level_2_action|g_config.voltage.level_2_protect_type // The protective mode for the second protection level if the threshold is below the threshold for battery voltage (autolanding) # Battery smart_bat_basic_cap // Die Grundkapazität der intelligenten Batterie (PRE CONFIGURE BAT. CAPACITY???) # RTH level1_smart_battert_gohome|g_config.voltage2.level2_smart_battert_gohome // A threshold for the battery stand in which the automatic return to the home function is activated (in % (Settings Lower Blocked by DJI) # Landing level2_smart_battert_land|g_config.voltage2.level2_smart_battert_land // A threshold for the battery stand in which the automatic landing function is activated (in % (Settings Lower Blocked by DJI))) # Battery tracking_low_bat_act // The action type if the battery stand is low during the persecution pointing_low_bat_act // The action type when the battery stand is low during the focus sop_type // stands for "Smart Overload Protection" and indicates what type of overload protection is used for the battery over_temperature_protect_enable // indicates whether the overheating protection is activated emergency_capacity // the capacity before the drone is not legitimate (in %) emergency_voltage // The tension before the drone is not legend (in mV) lower_limit_power // The minimal performance that can be given by the battery enable_new_smart_battery // activates the use of "new" smart batteries go_home_current // The electricity that is required for the automatic return of the aircraft to the starting point (in A) go_home_current_prop_cover // The electricity that is required for the automatic return of the aircraft to the starting point when the propellers are covered (in a) max_bat_power // The maximum performance that can be handed over by the battery (in W) lower_limit_temperature // The minimal temperature in which the battery can still work properly bat_enable_cap2_protect // Activates the use of overload protection for the second capacity of the battery # Landing / RTH bat_enable_smart_bat_landing_protect // Activates the use of overload protection for landing the smart battery (0 = disable RTH, protection for impact on emergency landing, 1 = stock) Battery lowest_voltage // The lowest voltage that the battery can have lowest_hover_power // The minimal performance that is needed to keep the aircraft in the air sop_set_value_in_watt // indicates the value of the maximum power consumption of the battery in watts sop_set_target_percentage // the goal of the service consumption indicates in percent battery_type_name_detect // Recognize the name of the battery type sop_limit_low_temp // The minimum temperature in which the overload protection function is activated sop_limit_low_temp_sop // indicates the value of the overload protection at low temperature sop_limit_high_temp // The maximum temperature in which the overload protection function is activated sop_limit_high_temp_sop // indicates the value of the overload protection at high temperature sop_min_takeoff_temp // indicates the minimal temperature where the aircraft can take off rotate_theta // This parameter specifies the rotary angle around the Z-axis of the IMU (Inertial Measurement Unit).In other words, it indicates how much degree of the IMU was turned to align its axis with the body's z-axis of the body # IMU imu_app_temp_cali.start_flag|g_cfg_debug.imu_cali_state[0][1] // This parameter specifies the start status of the temperature calibration for the IMU.If the value is set to "1", this means that the calibration has started g_cfg_debug.imu_cali_state[1][1] // This parameter specifies the calibration status for the IMU.The value "1" indicates that the calibration was successful, while the value "0" means that the calibration failed g_cfg_debug.imu_cali_state[2][1] // This parameter specifies the progress of the calibration of the IMU.The "0" value indicates that the calibration has not yet been started, while the value "100" means that the calibration is complete modify_type // This parameter specifies the type of change that was made at the flight control settings.The exact purpose of this parameter depends on the context in which it is used map_0 // map_1 // map_2 // map_3 // map_4 // map_5 // map_6 // map_7 // map_8 // map_9 // map_10 // map_11 // map_12 // map_13 // map_14 // map_15 // map_16 // map_17 // map_18 // map_19 // map_20 // map_21 // map_22 // map_23 // map_24 // map_25 // map_26 // map_27 // map_28 // map_29 // ```

[2023-05-09 20:47:30] s1m0n : ``` # RC R_RC_A // Controls the rolling movement of the drone (left/right) R_RC_E // Controls the nicking movement of the drone (forward/backward) R_RC_T // Controls the thrust of the drone (high/down) R_RC_R // Controls the greed movement of the drone (rotation left/right) R_RC_U // Controls a custom function R_RC_U_FAILSAFE // Controls a custom function in the failsafe mode (if connection to remote control breaks down) R_RC_GEAR // Switch the different flight modes of the drone (e.g. sports mode, tripod mode) R_RC_GO_HOME_SQUARE // Activates the automatic return to the start position and starts a circular flight R_RC_GO_HOME_SWITCH // Activates the automatic return to the starting position and starts a straight trip R_RC_EMERGENCY_MODE // Activates the drone emergency mode R_RC_EMERGENCY_STOP // Stop the drone flight in emergency mode R_RC_PAUSE_STOP // This is the channel for the pause mode of the drone.When the channel is activated, the drone stops its position and waits for further commands R_RC_IOC // Activates the IOC Intelligent Orientation Control mode, in which the drone always remains aligned in the direction of the controller ((Headless fashion ???) R_RC_K1 -K6 // These channels are programmable channels that can be used for custom functions R_RC_D1 -D8// These channels are specially intended for the control of camera functions such as zoom, focus and camera hinges R_RC_FARM_LEFT // Control the movements of spray equipment in agricultural drones R_RC_FARM_RIGHT // Control the movements of spray equipment in agricultural drones R_RC_FARM_SET_A // Settings for the spray volume and speed in agricultural drones R_RC_FARM_SET_B // Settings for the spray volume and speed in agricultural drones R_RC_FARM_SET_AB // Settings for the spray volume and speed in agricultural drones R_RC_FARM_MANUAL_SPRAY // Activates manual spray mode in agricultural drones R_RC_FARM_FLOW_SPEED // Controls the flow and the speed of the spray process in agricultural drones R_RC_FARM_MODE // Controls the flight mode for agricultural drones R_RC_C1 // Controls the camera with drones with built -in camera R_RC_START_STOP_MOTOR // Activates the automatic switching off of the motors if the drone is not properly R_RC_FARM_FRONT // An RC channel for the control of the forward movement of an agricultural vehicle.This parameter can usually be found in the configuration for drones with agricultural applications R_RC_FARM_BACK // An RC channel for controlling the backward movement of an agricultural vehicle.This parameter can usually be found in the configuration for drones with agricultural applications R_RC_CAMERA // An RC channel for controlling the camera on the drone.This parameter can usually be found in the configuration for drones with camera applications rc_type // A parameter that specifies the type of the RC controller used with the drone.This can vary depending on the manufacturer and model of the drone RC_ARM_STOP_ENABLE|g_config.rc_cfg.arm_action_enable // A parameter that specifies whether the drone should be stopped automatically at a certain RC signal.This can be helpful to avoid accidents if the drone gets out of control # App Controll RC_EMERGENCY_STOP_ENABLE // Activates the emergency stop of the drone via the remote control RC_STOP_CHECK_ENABLE // If rc_stop_motor_type = 6 then 1, if = 2 then 0 (0 = off, 1 = on) # RC knob_basic_roll // Roll control button knob_basic_pitch // Cross button for nicking knob_basic_yaw // Tender button for greed control knob_basic_thrust // Cruise button to control the thrust (thrust) knob_control_channel_KNOB_ATTI_GAIN // Cross button to set the Attitude Gain knob_control_channel_KNOB_GYRO_GAIN // Cross button for setting the gyro gain knob_control_channel_KNOB_ATTI_HORIZ_GAIN // Harizontal gain knob_control_channel_KNOB_ATTI_VERT_GAIN // Cross button to set the Attitude Vertical Gain knob_control_channel_KNOB_ATTI_RANGE_GAIN // Cross button for setting the Attitude Range Gain knob_control_channel_KNOB_ATTI_VERT_UP_GAIN // Cross button for setting the Attitude Vertical Up Gain knob_control_channel_KNOB_BRAKE_GAIN // Cross button for setting the Brake Gain knob_control_channel_KNOB_TILT_GAIN // Cross button for setting the Tilt Gain knob_control_channel_KNOB_HORIZ_POS_GAIN // Cross button to adjust the horizontal position gain knob_control_channel_KNOB_HORIZ_VEL_GAIN // Harizontal Velocity Gain control button dead_zone // is an area around the zero point in which no response to tax commands is made.The parameter indicates how big this zone is RC_STOP_MOTOR_TYPE // This parameter determines how the drone engines react when stopping the remote control.(6 = emergency (stock), 2 = at any time) rc_break_pause_time_ms // Is the time that goes by before the drone engines are switched on again after a stop.The parameter indicates how long this break should take (in MS) # DJI SDK hw_port // Communication sport for SDK integration, e.g. USB or WIFI sdk_baud // The transmission speed of the data stream for the SDK integration sdk_enable // Activates the SDK integration for the drone sdk_enable_1860 // Activates the support for the DJI 1860 communication protocol (??????????????) enable_sdk_lost_strategy // Activates the SDK strategy for the loss of the connection between the drone and the SDK sdk_lost_strategy // The strategy for the loss of the SDK connection enable_push_mission_status|g_config.api_entry_cfg.enable_push_mission_status // Activates the push status for drone missions sdk_data_type_acc // The type of transmitted acceleration data sdk_data_type_gyro // The type of transmitted gyroscope data sdk_data_type_alti // The type of transmitted height data sdk_data_type_height // The type of transmitted height data above the ground pos_data_type|g_config.api_entry_cfg.pos_data_type // The data type for the position of the drone, either GPS or local coordinates sdk_timestamp // The type of temple of time stamp data sdk_q // The type of transferred rotation data sdk_acc_ground //The type of transmitted acceleration data regarding the soil sdk_vel_ground // The type of transmitted speed data regarding the soil sdk_angular_vel // The type of transferred rotary speed data sdk_pos // The type of position data transferred sdk_widget_gps // Activates the transmission of GPS data sdk_widget_rtk // Activates the transfer of RTK data sdk_mag // The type of transmitted magnetometer data sdk_rc // The type of remote control data transferred sdk_gimbal_q // The type of transmitted gimbal rotation date.A higher value for the "SDK_GIMBAL_Q" parameter leads to a higher accuracy, but also to a higher load on the system.A lower value leads to a lower accuracy, but also to a lower load on the system sdk_fly_status // The type of flight status data transferred sdk_bat_level // The type of transferred battery level data sdk_ctrl_device // The type of controlled device, either the drone itself or a connected camera std_msg_frq_14 // The frequency of the transmitted standard message with ID 14 std_msg_frq_15 // The frequency of the transmitted standard message with ID 15 idle_level|g_config.engine.idle_level // Controls the signal level that is issued by the recipient when the control stick is in the neutral position idle_time|g_config.engine.idle_time // Controls the period according to which the signal level is placed on idle_level if the control stick is not operated prop_auto_preload|g_config.engine.prop_auto_preload // Determined whether the engine system should be loaded automatically when the propeller is blocked # App Controll sequence_start_en|g_config.engine.sequence_start_en // Controls whether the engine is started automatically if the control stick is brought to a certain position after switching on # Autostart g_config.takeoff.auto_takeoff_height // Departure height when the function is activated for the automatic start (in m) g_config.takeoff.auto_takeoff_vel // Departure speed when the function is activated for automatic start (in m/s) # Manual Mode mode_manual_cfg_tilt_exp_mid_point // This parameter determines the center of the exponential curve for inclination in manual flight mode.The higher the value, the more aggressive the curve is around the center.A lower value means that the curve around the center is flatter mode_manual_cfg_tors_exp_mid_point // This parameter determines the center of the exponential curve for the greed angle in manual flight mode.Similar to the parameter for the inclination, this value determines the degree of aggressiveness of the curve around the center mode_manual_cfg_lift_exp_mid_point // This parameter determines the center of the exponential curve for upward movement in manual flight mode.The same applies here: the higher the value, the more aggressive the curve is around the center # Landing exit_landing_ground_not_smooth_enable|g_config.landing.exit_landing_ground_not_smooth_enable // If this parameter is activated, the drone will try to avoid during the landing process on uneven terrain that the landing point is changed by vibrations and movements (o = off, 1 = on) adv_landing_enable|g_config.landing.adv_landing_enable // When this parameter is activated, the drone automatically carries out a floating flight when landing.This is intended to guarantee a gentler landing process. # RTH go_home_height|g_config.go_home.fixed_go_home_altitude // Return height (in m) go_home_heading|g_config.go_home.go_home_heading_option // Determines how the drone determines its orientation in the "return-to-home" procedure go_home_when_running_gs|g_config.go_home.go_home_when_running_gs // Determine whether the drone should return to the base station in the "Return-to-Home" procedure if it is already on the floor. avoid_enable|g_config.go_home.avoid_enable // Activated or deactivates the obstacle prevention system during the "return-to-home" procedure adv_gohome_enable|g_config.go_home.adv_gohome_enable // Activated or deactivates the extended "return-to-home" mode, which offers additional functions such as avoiding obstacles and the automatic return with a low battery stand rtk_go_home_enable // Determines whether the drone should use the RTK system for navigation during the "return-to-home" process cur_height_gohome_enable|g_config.go_home.cur_height_gohome_enable // Determines whether the drone should use its current height or the specified height during the "Return-to-Home" procedure cur_height_gohome_dis|g_config.go_home.cur_height_gohome_dis // Specifies the distance from which the drone uses its current height instead of the specified height during the "Return-to-Home" procedure avoid_ascending_height_limit_disable|g_config.go_home.avoid_ascending_height_limit_disable // Deactivates the restriction of the height until the drone can increase in the "return-to-home" procedure force_ascending_align_enable|g_config.go_home.force_ascending_align_enable // Determines whether the drone should rise and align with the "return-to-home" process, even if there is no connection to the base station go_home_finish_radius // Determines the radius within which the drone ends up after completing the "Return-to-Home" procedure miss_rtk_use_rtk_data|g_config.miss_rtk.use_rtk_data // Determines whether the drone should use the RTK system to determine the position during the mission implementation # Tripod Mode g_config.mode_tripod_cfg.rc_scale // This parameter defines the sensitivity of remote control in Tripod mode mode_tripod_cfg_tilt_atti_range // This parameter defines the inclination limit for the camera in Tripod mode g_config.mode_tripod_cfg.tors_gyro_range // This parameter defines the border for the gyroscope movement in Tripod mode g_config.mode_tripod_cfg.vert_vel_up // This parameter defines the maximum upward speed in Tripod mode g_config.mode_tripod_cfg.vert_vel_down // This parameter defines the maximum downward speed in Tripod mode tripod_func_enabled|g_config.mode_tripod_en_cfg.tripod_func_enabled // This parameter activates or deactivates the Tripod mode.If this parameter is set to "false", the Tripod mode is deactivated and the drone flies in normal mode. #DJI SDK CM_tors_range // controls the maximum swivel area (in degrees) of the camera in the "Course Lock" flight mode setting CM_brake_sensitive // controls the sensitivity of the brake function of the drone if the remote control returns to the middle after the tax lever has been released // (Both parameters can be used to adapt the flight properties of the DJI drones to the specific needs of the user) # Gentle Mode mode_gentle_cfg_rc_scale // This parameter defines the sensitivity of the remote control in the "Gentle" flight mode.The higher the value, the more sensitive the drone reacts to inputs of the remote control mode_gentle_cfg_tilt_atti_range // This limits the angle of inclination of the drone in the "Gentle" flight mode.If this value is low, the drone can only fly very flat, at higher values it can fly steeper mode_gentle_cfg_tors_gyro_range // With this parameter, the shooting sensitivity of the drone is determined in the "Gentle" flight mode.A higher value means that the drone reacts faster and more sensitive to rotary movements mode_gentle_cfg_vert_vel_up // This sets the maximum speed with which the drone can fly up in the "Gentle" flight mode mode_gentle_cfg_vert_vel_down // This determines the maximum speed with which the drone can fly down in the "Gentle" flight mode g_config.mode_gentle_cfg.tilt_exp_mid_point // This parameter influences the control behavior of the drone in the "Gentle" flight mode.A higher value means that the drone reacts faster to the remote control input g_config.mode_gentle_cfg.tors_exp_mid_point // Similar to the previous parameter, this value influences the control behavior of the drone in the "Gentle" flight mode, but for rotary movements g_config.mode_gentle_cfg.lift_exp_mid_point // This value influences the behavior of the drone in the "Gentle" flight mode when it flies upwards.A higher value leads to a faster climbing speed # Normal Mode g_config.mode_normal_cfg.rc_scale // Detects the scaling factors for the remote control channels in normal flight mode g_config.mode_normal_cfg.tilt_atti_range // Defines the area in which the tendency of the aircraft can be controlled in normal flight mode g_config.mode_normal_cfg.tors_gyro_range // Defines the area in which the rotation of the aircraft can be controlled in normal flight mode g_config.mode_normal_cfg.vert_vel_up // Defines the maximum vertical speed with which the aircraft can rise up in normal flight mode g_config.mode_normal_cfg.vert_vel_down // Defines the maximum vertical speed with which the aircraft can drop down in normal flight mode g_config.mode_normal_cfg.tilt_exp_mid_point|g_config.control.tilt_exp_mid_point // Defines the point at which the exponential function, which depicts the remote control channels on the inclination of the aircraft, has its maximum effect in normal flight mode g_config.mode_normal_cfg.tors_exp_mid_point|g_config.control.yaw_exp_mid_point // Defines the point at which the exponential function, which depicts the remote control channels on the rotation of the aircraft, has its maximum effect in normal flight mode g_config.mode_normal_cfg.lift_exp_mid_point // Defines the point at which the exponential function, which depicts the remote control channels on the buoyancy of the aircraft, has its maximum effect in normal flight mode ```

[2023-05-09 20:48:39] s1m0n : ``` #Sport Mode g_config.mode_sport_cfg.rc_scale // This parameter indicates how strongly the remote control reacts to the movements of the drone.A higher value means a stronger reaction mode_sport_cfg_tilt_atti_range|g_config.mode_sport_cfg.tilt_atti_range // This parameter defines the maximum angle of inclination that the drone can reach in sports mode g_config.mode_sport_cfg.tors_gyro_range // This parameter specifies the maximum area in which the rotary speed sensor of the drone can work in sports mode mode_sport_cfg_vert_vel_up|g_config.mode_sport_cfg.vert_vel_up // This parameter defines the maximum ascent speed of the drone in sports mode mode_sport_cfg_vert_vel_down|g_config.mode_sport_cfg.vert_vel_down // This parameter defines the maximum sinking speed of the drone in sports mode g_config.mode_sport_cfg.tilt_exp_mid_point // This parameter defines the angle of inclination, in which the drone is stabilized in sports mode g_config.mode_sport_cfg.tors_exp_mid_point // This parameter defines the angle of rotation in which the drone is stabilized in sports mode g_config.mode_sport_cfg.lift_exp_mid_point // This parameter defines the buoyancy in which the drone is stabilized in sports mode zenmuse_cfg.type|g_config.zenmuse_cfg.type // This parameter specifies the type of camera that is mounted on the drone.For example, this can be a Zenmuse camera made by DJI.```

[2023-05-10 14:36:57] gudvin : sdk_pos // The type of position data transferred sdk_widget_gps // Activates the transmission of GPS data this could be the param to shutdown droneID?

[2023-05-10 19:44:05] s1m0n : There is no diff in params, with disabled or enabled DroneID. I thinks its stuff for InApp UI ?1 Widget_GPS can be

[2023-05-11 13:34:27] infinitydrones : Anyone else seeing this?

[2023-05-11 13:43:53] joonas : yup, it's not just you:tm:

[2023-05-11 13:43:53] joonas : yup, it's not just you.

[2023-05-11 13:49:53] joonas : we've seen some intermittent issue with the api fpv.wtf uses over the past week or so as well, but this is the first time i'm seeing it properly down.

[2023-05-11 13:49:53] joonas : we've seen some intermittent issues with the api fpv.wtf uses over the past week or so as well, but this is the first time i'm seeing it properly down.

[2023-05-11 13:55:53] konraditurbe : GitHub is also down

[2023-05-11 13:56:27] joonas : it's also been flaky for like a week

[2023-05-11 13:56:45] joonas : the meme is the day ends with a "y" so GH is down :)

[2023-05-11 15:37:44] cs2000 : Just checked with the guys. It was planned server maintenance that kinda went sideways and took time to recover from. From the week i had with DDD last week, I totally know how they feel right now ? should be back up now :)

[2023-05-11 20:12:37] infinitydrones : thank you @cs2000

[2023-05-11 20:12:48] infinitydrones : I'll let the guys on my channel know :)

[2023-05-12 09:57:45] ant : ant joined the channel.

[2023-05-13 14:24:56] dereksynkopa : I am pleased to share the information that the Mini 3 pro with goggles 2 is able to transmit the image to two devices at the same time. It's no secret that after starting the mini 3 pro with the RM-330, the image appears in the goggles when they are turned on. However, if there is firmware 1.01.0300 in the rc, the video image will also appear in the rc. This is not reliable and will sometimes black screen or freeze, however telemetry works fine and mapping does as well. The image may appear automatically or after pressing the power button twice. I think it has to do with DJIFly v.1.9.1.

[2023-05-13 14:59:48] tmbinc : Nice! I've only seen Mini 3 Pro with Motion Controller and Goggles 2 working, but never the combination you mentioned

[2023-05-13 15:03:59] dereksynkopa : And something else, I finally got rid of RemoteID, the Drone scanner app no longer shows my drone.

[2023-05-13 15:23:17] oakley75 : Awesome, congrats! Speaking of the droneid scanner apps, which (android) one do y'all prefer?

[2023-05-13 16:25:23] theminer : That's real awesome. Can you share some insight on how to get rid of RemoteID? And if this also with DroneID disable too?

[2023-05-13 20:56:57] dereksynkopa : Unfortunately, I will disappoint you. I didn't do anything special. I just noticed that in the previously used firmware 1.00.0100 RemoteID was enabled in Europe, now I have version 1.00.0600 and RemoteID is disabled and it should be so until it is mandatory here. DroneID works, of course, without changes.

[2023-05-13 21:41:22] theminer : So bad that even with their original firmware 1.00.0100 RemoteID already there. Then maybe Mini 3 Pro are not for me and my situation. I have to go with Mini 2 + Mavic 3 route then OMG I really like how quiet the Mini 3 Pro are. Thank you so much for give me this info.

[2023-05-14 13:43:13] konraditurbe : Anybody mess w/ Mini3 Pro params in dh params section? Looking to disable GPS completely, reduce the number of constellations if possible.

[2023-05-14 13:46:09] lolo780 : Foil works, same as flying indoors. Do you want ATTI, or fly in NFZ?

[2023-05-15 06:56:05] infinitydrones : anyone know what the parameters are to change sport mode of the Air 2 to Atti mode?

[2023-05-15 08:31:39] s1m0n : I think it's same way like on mini2 g_config_control_control_mode[1]=3

[2023-05-15 09:39:17] infinitydrones : thx I'll go check it out. would be awesome if it works

[2023-05-15 14:00:08] dereksynkopa : Is dh-win 1.31 able to flash RC rm-330? I try, but to no avail. I have developer options unlocked and S9 launcher installed. I would like to freely change the firmware in rm-330. Does anyone know how?

[2023-05-15 14:28:42] s1m0n : What's ur plan?

[2023-05-15 15:04:29] dereksynkopa : I currently have version 1.02.0300, as I wrote before, I got the image on both devices, goggles and rm-330. However, it is quite unstable and displayed in two modes: source and recorded. DJI has improved the transmission in fv 1.02.0600. I'd like to see if it's noticeable and if it doesn't lock the screen with an incompatibility message. If that were the case, then I'd like to go back to ...300. In addition, the problem is the lack of versions other than 1.03.0100 in Dji Assistant 2.

[2023-05-15 20:10:55] infinitydrones : So its g_config_control.control_mode[1]=3 and I want to change the sport mode switch to ATTI mode so that the Air 2 can reach higher speeds and smoother flight

[2023-05-15 20:11:26] infinitydrones : I needed to change the value from 8 to 3 if I remember correctly. Will go test tomorrow. Hope it works.

[2023-05-16 06:01:36] infinitydrones : sadly... it does not work... Still looking for a way to change the sport mode switch to ATTI mode on the Air 2

[2023-05-16 06:40:45] s1m0n : Try other modes. The Mini2 then shows Atti in the display. Presumably, other modes are assigned to the Air2. The Mini2 has 14 different modes. Just change all modes by fswitch[1]. Drone does not have to be restarted for this. Change parameters, briefly in the air, if it does not work, reconnect to the USB cable and try again.

[2023-05-16 06:42:37] lolo780 : I'm pretty sure I used ATTI mode on the Air 2 before but it's been a while.

[2023-05-16 06:47:23] s1m0n : Try 0 or 2, but 0 can be manual Mode

[2023-05-16 06:51:09] lolo780 : 0 is definitely manual mode and doesn't work

[2023-05-16 07:09:19] infinitydrones : Just weird... I had a clients Mavic Air 2 here the other day and he's sport mode definitely switches to Atti...

[2023-05-16 07:10:02] infinitydrones : No I want to take that feature and add it to another Air 2... but no idea what the older client changed on he's drone - back to square one :(

[2023-05-16 07:10:40] infinitydrones : If you can remember how to enable atti mode on the Air 2 please let me know.

[2023-05-16 08:09:23] s1m0n : Make a backup of the parameters and diff them with your paramter. Or share both backups and I'll show you the differences. No personal data is preserved in the backups

[2023-05-16 12:08:42] bri3d : bri3d joined the channel.

[2023-05-16 12:55:17] rabbitambulance : rabbitambulance joined the channel.

[2023-05-16 13:31:47] oakley75 : Have you tried changing tripod mode to atti instead of sport? Honestly I thought the parameter to use started with fswitch, no?

[2023-05-16 13:31:47] oakley75 : Have you tried changing Tripod mode to ATTI instead of Sport? Honestly I thought the parameter to use started with fswitch, no?

[2023-05-16 13:31:47] oakley75 : Have you tried changing Tripod mode to ATTI instead of Sport?

[2023-05-16 14:57:17] infinitydrones : I can confirm that the command used above is working great to get the drone into atti mode when using sport mode :D

[2023-05-16 14:57:39] infinitydrones : _config.control.control_mode[1]=3

[2023-05-16 15:11:41] oakley75 : Glad you got it work! Doing this myself, miss atti.

[2023-05-16 15:14:32] oakley75 : Btw, this is what I was thinking of, but I guess it's different on the newer ones. fswitch_selection|g_config_control_control_mode[0]

[2023-05-16 15:34:24] eddy : Hi @tmbinc I tried using the "decrypt_mini_ftp_encryption and decrypt_wm161_log.py" on the Mini2 that you described, but I was not successful with any method.. Are the decryption keys correct, have they not been changed over time? or what am I doing wrong? The decrypted file was either empty or only a couple of bytes long. Tested with:: Onboard *.dat file (obtained using DA2) apk *.dat file (generated by the Fly App)

[2023-05-16 16:35:10] tmbinc : Nothing should have changed.. do you have an example file you can share?

[2023-05-16 16:59:14] eddy : File in PM.

[2023-05-16 16:59:14] eddy : Example in direct message.

[2023-05-16 17:38:26] quad808 : Hello peeps! New DH version dropped today, V1.32 Read about the fixes and the release here: https://drone-hacks.com/blog/post/831

[2023-05-16 17:46:01] quad808 : Basic info...fixed Mini 2 flashing errors. Also working with DDD, after downgrading to the recommended firmware on drones that can be hacked, such as Air2S on .2040, Air2 on .0610 and FPV on 01.02.0000, you can apply the hacks, make sure they are working good, then flash the DDD custom firmware with module .0801 removed (this is the main update to the system partition) and the drone will report that its on the latest firmware, so no more update nagging. This is OPTIONAL if you want to do this, and will not introduce any new "features" that are in the latest firmware as compared to the earlier firmware, but of course you will have the latest updates from all the other firmware modules, such as battery, esc etc...and keep your hacks working. DH, of course will show you on the latest firmware, and no hacks available, so you would then need to downgrade fully, apply hacks again. You guys know the drill.

[2023-05-16 17:46:01] quad808 : Basic info...fixed Mini 2 flashing errors. Also working with DDD, after downgrading to the recommended firmware on drones that can be hacked, such as Air2S on .2040, Air2 on .0610 and FPV on 01.02.0000, you can apply the hacks, make sure they are working good, then flash the DDD custom firmware with module .0801 removed (this is the main update to the system partition) and the drone will report that its on the latest firmware, so no more update nagging. This is OPTIONAL if you want to do this, and will not introduce any new "features" that are in the latest firmware as compared to the earlier firmware, but of course you will have the latest updates from all the other firmware modules, such as battery, esc etc.

[2023-05-17 06:11:01] eddy : Well thank you @tmbinc. My fault.

[2023-05-17 07:28:50] dereksynkopa : In the case of raicer there is no .801 module in the firmware. I understand that remove .802?

[2023-05-17 07:28:50] dereksynkopa : In the case of raicer there is no .801 module in the firmware. I understand that remove .802? But it doesn't make sense anyway, because the rest of the modules are the same as in 1.02.0000

[2023-05-17 07:28:50] dereksynkopa : In the case of raicer there is no .801 module in the firmware. I understand that remove .802? But it doesn't make sense anyway, because the rest of the modules are the same as in 1.02.0000. However, will this protect against the appearance of the message about the need to update?

[2023-05-17 08:38:26] mainframe : I had also working dual video/telemetry with RC Pro v03.01.1100. But only with Mini3Pro - with Mavic3 video/telemetry freezes. And I have a report that with RC Pro v03.01.1200 it will freeze also with Mini3Pro.

[2023-05-17 11:45:41] joelg : joelg joined the channel.

[2023-05-17 13:21:24] cs2000 : Correct, as far as the FPV Racer is concerned, i removed 0802 module as 0801 doesn't exist on this model, does the same thing in essence though. Yes, after doing it, the drone will show as fully up-to-date so Assistant/Fly wont keep nagging you to update

[2023-05-17 14:12:32] oakley75 : Just to clarify, this will still bump your ARB. So if you're on a early firmware and do this, you will not be able to go back. Unless I'm wrong...

[2023-05-18 03:43:59] lolo780 : Mavic 3, 16km x 2

[2023-05-18 10:50:04] cs2000 : Another update to DH just dropped, this time without the need to downgrade, hack and then re-flash the custom firmware again (you can now hack whilst being on custom firmware) Also support for the Mini 2 upto 01.06.200! https://drone-hacks.com/blog/post/844

[2023-05-18 12:19:58] dereksynkopa : My congratulations! That's really a lot of progress. For many users, this is great news. Thanks for your work. One thing to keep in mind is that DroneID may be included in the new recommended version. I will wait for other information.

[2023-05-18 12:19:58] dereksynkopa : My congratulations! That's really a lot of progress. For many users, this is great news. Thanks for your work. One thing to keep in mind though is that DroneID may be included in the new recommended version as well as disabled nan hack. I will wait for other information.

[2023-05-18 13:06:07] cs2000 : I will ask the guys to check :)

[2023-05-18 13:06:23] cs2000 : I dont have any of the drone that the new update can play with! so cant check for myself

[2023-05-18 13:54:42] stanlee : LEGEND. You using any battery param settings to stop auto-landing? You've got a battery mod on this?

[2023-05-18 13:54:42] stanlee : LEGEND. You using any battery param settings to stop auto-landing?

[2023-05-18 13:54:42] stanlee : LEGEND. You using any battery param settings to stop auto-landing? You've got a battery mod on this? 66% and 36 min left?

[2023-05-18 14:17:33] oakley75 : Have to admit, it feels pretty nostalgic to be able to mix modules again. Yanking out the 901, mixing different modules, that was fun! A big thank you to @cs2000 , please send gratitude to them for continuing the progress of DH :) @dereksynkopa Thanks for the nan and ID comment, helpful to remember. * I've lost my copy of DH v1.32, can anyone help out? I do wish the previous dh versions were allowed for downloading.

[2023-05-18 14:17:33] oakley75 : Have to admit, it feels pretty nostalgic to be able to mix modules again. Yanking out the 901, mixing different modules, that was fun! A big thank you to @cs2000 , please send gratitude to you-know-who for continuing the progress of DH :) @dereksynkopa Thanks for the nan and ID comment, helpful to remember. * I've lost my copy of DH v1.32, can anyone help out? I do wish the previous dh versions were allowed for downloading.

[2023-05-18 14:18:54] cs2000 : Will pass on the comments mate, thankyou. Just so everyone knows, i have nothing to do with the updates to DH, im just a messenger :)

[2023-05-18 14:18:54] cs2000 : Will pass on the comments mate, thankyou. Just so everyone knows, i have nothing to do with the updates to DH, im just a messenger :) I do agree though, crazy how this old technique suddenly became relevant again!

[2023-05-18 14:30:01] oakley75 : Indeed. History does repeat itself huh. Which is why we should never try to alter or forget about certain history books because we don't like the subject. History is history, if it happened (good or bad), then it happened, that is the definition of history. This is comment is mainly USA directed. Wait how'd I get going onto a sociological topic???

[2023-05-18 14:32:17] lolo780 : 900 firmware allows auto landing to be turned off. Tailwind allowed 18m/s on the way out up high, then flew back at treetop height.

[2023-05-18 14:37:05] cs2000 : Just as an update. The mini will use the older FC-Version after the hack. it is not a module-mix firmware like for the other drones. Usually only the fc limits the parameters, so what worked under 01.03.0000 should work now under 01.06.0200 too (after using at least one hack), keep an eye on the fc-verison PRIOR and AFTER the hack, if theyre the same, the NaN trick will still work. For mini2 after applying at least one hack the droneID can be disabled too! So flash 01.06.0200, use one of the hacks in DH and then ciajeepdoors will also work on the new firmware

[2023-05-18 14:38:26] cs2000 : Also, helpful to know, DH does have these dynamic links. **Latest Version:** https://drone-hacks.com/software/download/desktop **Previous Version:** https://drone-hacks.com/software/download/desktopPrior **Previous Previous Version (currently 1.29):** https://drone-hacks.com/software/download/desktopOlder

[2023-05-18 14:40:02] oakley75 : Awesome! Yeah I did the url hack but he had it blocked off (as is protocol). Much appreciated for the links!

[2023-05-18 14:50:03] cs2000 : Yeah they have just been set up :)

[2023-05-18 15:13:29] baxove : That is great news for the Mini 2! Thanks a lot, DH! :slightly_smiling_face: Do we know any benefits of upgrading from version 01.03.000 to 01.06.0200? DJI's release notes are quite vague

[2023-05-18 15:18:38] cs2000 : Only what is in the vague release notes sadly.

[2023-05-18 18:28:08] loveyou : cs2000 Congratulations for the new hack, I flew my AIR 2S a couple of times and everything seems perfect. I will continue on testing it.

[2023-05-19 09:55:01] cs2000 : Drone-Hacks is not my project, but i will pass your comments on, im glad its working for you though!

[2023-05-19 11:42:32] s1m0n : Can be deactivated, but will be reactivated OVER DjI Fly v1.5.10 when the drone is launched

[2023-05-19 12:37:06] loveyou : for others no working ? :stuck_out_tongue:

[2023-05-20 05:13:09] lolo780 : I tried to use 1.33 on a Mavic 2 Pro and the certificate didn't work. I was out, so did it again with 1.32 and it worked ok.

[2023-05-20 15:42:39] dronepilot : Just uploaded the certificate to a brand new M2 Pro. Everting working fine, i did on 1.32v didn't download the 1.33. What firmware are you running on your m2?

[2023-05-20 17:02:11] lolo780 : 0770

[2023-05-20 17:14:57] quad808 : Guys @lolo780 , @dronepilot did you guys get an error when using 1.33 or just no cert showed up in the app? For the M2 Pro, sometimes there is a problem in the app where the cert is there, but won't show...but its there and works. Bad programming on DJI's part in the app. If you delete the app, re-install, sign into DJI Account, the cert shows up. This only happens on the M2 drones.

[2023-05-20 17:19:14] lolo780 : I didn't check NFZ, but the M2P was limited at 500m

[2023-05-20 17:38:29] quad808 : Do you remember if there was an error, or just no cert??

[2023-05-20 17:43:44] lolo780 : The process looked like it completed normally, and I went out to fly.

[2023-05-20 17:44:43] quad808 : Thanks for that, reported to the Dev. to check. Glad you got it working on 1.32!

[2023-05-20 21:07:30] dereksynkopa : Has anyone had success with the NaN trick on the mini 3 pro? My actions are ineffective. I proceed similarly to the Mini 2.

[2023-05-24 09:57:11] infinitydrones : anyone able to download 1.33?

[2023-05-24 09:57:29] infinitydrones : When i click the download link it downloads 1.31 instead :(

[2023-05-24 10:49:06] joelg : has anyone tried the nan hack on the air2s

[2023-05-24 10:50:23] infinitydrones : nan hack?

[2023-05-24 10:51:21] joelg : changing sport mode decent param to nan and using gentle mode to increase decent speed

[2023-05-24 11:04:26] joelg : new drone hacks update now lets you set params to nan easily

[2023-05-24 12:55:02] oakley75 : just checked, it's dl'ing 1.33 for me

[2023-05-24 13:18:20] infinitydrones : yes, its working again thx

[2023-05-24 17:22:36] baxove : I have a new Mini 2 (gen 2) that came with fw 01.03.0500. Now I see that on DH website, on fw 01.03.0009 it says "DO NOT DOWNGRADE TO THIS IF YOUR DRONE IS ON GREATER FW VERSION! ". Does this mean I can't downgrade to that version or is it only if you downgrade from ARB#2 (01.04.0000 and greater)?

[2023-05-25 08:20:35] infinitydrones : latest version has updated. you can check the site you update to the latest firmware and use the recommended version to flash

[2023-05-25 08:20:57] infinitydrones : 01.06.0200 supports unlocking, so just update to that

[2023-05-25 08:21:31] infinitydrones : I have an issue where I bought a license and when I log into dronehacks it does not pop up to link the license to my mini 2...

[2023-05-25 08:24:15] cs2000 : I noticed it yesterday and let the guys know, they fixed it. They did some code updates yesterday to the website and it reverted a few things :) They also told me, you can really only use 1.33 now as some of the changes were related to core app functionality and older apps may not work properly anymore.

[2023-05-25 08:25:26] cs2000 : It meant literally do not downgrade to **that** version.

[2023-05-25 09:27:50] baxove : Thanks, I think I will stay on 01.03.0500 then, or maybe upgrade to the recommended version, 01.06.0200. I am just afraid that DJI sneaked something in to the later versions.

[2023-05-25 12:45:23] infinitydrones : as I understand it if you own a mini 2 you should update to 01.06.0200 and then unlock it. This will remove the confusion of different gen mini 2's etc. Loving the new updates from Drone-hacks!

[2023-05-25 20:20:17] williamb2023 : williamb2023 joined the channel.

[2023-05-25 20:24:10] williamb2023 : Evening all, thank you for @cs2000 for pointing me towards this channel. I have a friends Matrice 300 RTX which is currently on firmware 04.01.0000 . I have attempted to downgrade the firmware on several platforms (DH, nolimitdronez and DJI Assistant 2) and all give me a failure as soon as it tries to flash the firmware. I have tried several versions of firmware too and none are successful. If anyone can give me any pointers or any help I am all ears

[2023-05-27 05:17:35] johnnokomis : johnnokomis joined the channel.

[2023-05-27 05:22:10] drmsucks : drmsucks joined the channel.

[2023-05-27 05:24:23] johnnokomis : if you have the .zip firmware update file, put it on a USB stick and plug it into the controller. Use the Pilot 2 app to do an offline firmware update.

[2023-05-27 08:35:42] s1m0n : Why does the mm2 not work in Manual Mode when the NFZ Hack is active? The drone will not let me switch to Manual Mode. If I deactivate the drone hacks certificate, the manual mode works. To what extent does this hack affect the system and what parameters are still blocked because of it ?

[2023-05-27 08:54:22] lolo780 : Manual mode doesn't work with any cert

[2023-05-27 14:40:18] s1m0n : Are there any other parameters affected by a cert?

[2023-05-27 19:05:44] dereksynkopa : Are there any significant changes in the new version of the DHC1.17 app? Or only: Optimized flight safety. :grin:

[2023-05-27 19:25:40] s1m0n : Mini 2 rollin' ?

[2023-05-28 11:54:41] lishujian3 : lishujian3 joined the channel.

[2023-05-28 20:14:22] sambuko : I want to downgrade air2s, but have error. Assistant 2 is installed.

[2023-05-28 20:23:41] cs2000 : Best to send a support ticket in mate https://support.drone-hacks.com/

[2023-05-29 03:44:21] shinoby : shinoby joined the channel.

[2023-05-29 05:40:35] nz-maori : @sambuko, got the same error, then used another PC and then it worked for me. So maybe a FW / AV problem.

[2023-05-29 20:54:12] s1m0n : Mavic Mini2.. 4,6km altitude. Altitude indication counts on from 3274.7m, but backwards with a - (minus) in front of it.

[2023-05-29 20:54:12] s1m0n : Mavic Mini2.. 5,2km altitude. Altitude indication counts on from 3274.7m, but backwards with a - (minus) in front of it.

[2023-05-29 21:20:57] stanlee : In middle you increase ascent/descent speed?

[2023-05-29 21:20:57] stanlee : Did you increase ascent/descent speeds?

[2023-05-29 21:21:03] stanlee : How did it handle the wind?

[2023-05-29 21:25:33] lolo780 : What battery?

[2023-05-29 21:26:00] lolo780 : And props

[2023-05-29 22:11:24] s1m0n : Yeah, up 8,5m/s, down 10 m/s

[2023-05-29 22:16:00] s1m0n : Lipo-hv 4,4V/3650mAh

[2023-05-29 22:26:13] s1m0n : Lipo-hv 4,4V/3650mAh.. (3500mAh for Air2 from Ali)

[2023-05-29 22:26:47] s1m0n : No problem

[2023-05-29 22:28:26] lolo780 : How much left in the tank? Think the mini 2 can do 6km?

[2023-05-29 22:31:44] stanlee : I smell a challenge for you @lolo780

[2023-05-29 23:48:55] s1m0n : Signal is more the problem. Had no signal for 2.3s and the drone has activated the force landing mode. Can not deactived (for now? Maybe never?? Hard to test) and sinks only with 3m/s. Turned off the motors at 3 kilometers altitude .... Drone drifted 1.2km, but not as badly destroyed as one would suspect. Gimbal broken (not the first time, can be easily glued ?) and an arm is broken, but that was also broken times ??) So yes, without losing Connection, i think 6km is possible easy

[2023-05-29 23:48:55] s1m0n : Signal is more the problem. Had no signal for 2.3s and the drone has activated the force landing mode. Can not deactived (for now? Maybe never?? Hard to test) and sinks only with 3m/s. Turned off the motors at 3 kilometers altitude .... Drone drifted 1.2km, but not as badly destroyed as one would suspect. Gimbal broken (not the first time, can be easily glued ?) and an arm is broken, but that was also broken times ??)

[2023-05-30 00:17:35] lolo780 : That sucks. The signal on the Mini 2 aircraft side just sucks.

[2023-05-30 00:19:25] lolo780 : https://youtu.be/m942r_aUZ_8 I really enjoy flying the FPV because it won't fuck you over randomly.

[2023-05-30 02:36:03] oakley75 : Damn you are consistently awesome

[2023-05-30 03:03:01] stanlee : Unrelenting legend as far as I am concerned.

[2023-05-30 05:44:11] tmbinc : (BTW there's this windspeed estimation, is that accurate? Has someone plot windspeed over height?)

[2023-05-30 05:44:21] tmbinc : Forced landing mode can't be deactivated even after signal is back?

[2023-05-30 05:45:37] tmbinc : I assume you're in FCC mode already?

[2023-05-30 05:47:47] tmbinc : I wonder if problem is uplink or downlink; I know the log says "downlink", but I don't know if that's accurate. If it's downlink, I wonder if we could force the radio to use worse MCS to improve range, at the cost of image transmission.

[2023-05-30 07:00:54] s1m0n : No, unfortunately not. As far as I could find out, other rules apply from 950-1050m altitude. This includes the behavior for automatic return/landing in case of signal loss. At some point, the emergency mode sets in, then the drone sinks only with 2m / s until at about 2.5V voltage per voltage, the battery switches off completely.

[2023-05-30 07:08:02] s1m0n : Yes, I was in FCC mode. But I noticed, there are two different FCC modes, or is that imagination? You can see it once over the 1 and 4km limit in the transmission. But there are also differences in the receive symbol? If the symbol is small, I could swear the signal is better?

[2023-05-30 07:17:07] s1m0n : I am pursuing another (possible) possibility. DJI uses Qurovo HF Amp chips. QPF4206 for 2,4Ghz.and QPF4550 for 5,8Ghz. Maybe DJI uses an adapted version to comply with the legal framework conditions, or maybe the chips can be easily exchanged? Maybe these chips can be tweaked directly by changing some resistors (I am still looking for more information).

[2023-05-30 07:18:36] lolo780 : Maybe pour some Jose Qurovo

[2023-05-30 07:21:22] lolo780 : Have you tried turning the aircraft antenna more horizontal? I'll either ascend in ATTI, or face the aircraft directly into the wind and fly backwards to take off some tilt. That has the added effect of improving signal.

[2023-05-30 07:22:20] lolo780 : If signal is lost, the aircraft will pitch forward, improving antenna angle

[2023-05-30 07:50:35] s1m0n : I have also heard that you can move the antennas from the arms to the side and it should provide better signal. But I lack the equipment to verify the am in the safe terrair can

[2023-05-30 07:52:03] lolo780 : For overhead flying, 2 verticals are the worst

[2023-05-30 07:52:04] s1m0n : Makes no difference once the signal loss was there. I guess 1second will be enough for force landing to be activated.

[2023-05-30 07:53:35] s1m0n : So one is also nonsense? If I see it correctly, one antenna is for 2.4ghz and one for 5.8Ghz.

[2023-05-30 08:00:17] lolo780 : Not sure

[2023-05-30 08:09:00] ginostred : ginostred joined the channel.

[2023-05-30 09:04:09] tmbinc : I'll take a look at the forced landing thingie on signal loss... Do you have a FC log from that? (just text log is sufficient for now)

[2023-05-30 09:04:48] tmbinc : About the HF amp, do we have a datasheet? I know part of the config files for S1 are the "pwr.bin" files that have a lot of tables. I haven't looked in how they are used but maybe they could be tweaked?

[2023-05-30 09:30:46] s1m0n : Then I'll wait until you have reached the 6km and then make me more thoughts ?

[2023-05-30 09:31:43] s1m0n : Yes I have

[2023-05-30 09:34:53] s1m0n : I don't think the s1 is interesting. It is much more the components that sit in front of the RF chips.

[2023-05-30 09:47:13] tmbinc : ~~The S1 firmware programs them though, via e.g. I2C~~ edit: nevermind, they have a fixed TX gain; so the programmable gain likely comes from the RFIC in front of that

[2023-05-30 09:47:13] tmbinc : The S1 firmware programs them though, via e.g. I2C

[2023-05-30 09:47:24] tmbinc : Having a datasheet would help me understand that sequence much better :)

[2023-05-30 09:47:34] tmbinc : (Datasheet of the RF chips)

[2023-05-30 09:55:51] qgig : qgig joined the channel.

[2023-05-30 10:06:14] accountfrompl : Yup, there are more modes - set your CC to 00 to enable max power

[2023-05-30 10:50:46] s1m0n : How to do that please ?

[2023-05-30 11:30:04] s1m0n : Please share your findings.I am not deep enough in the subject to really understand datasheets

[2023-05-30 12:23:09] dereksynkopa : From what I see here, it was an altitude of 4,618m, not 5.2km. Did you count it right?

[2023-05-30 12:23:09] dereksynkopa : From what I see here, it was an altitude of 4,617m, not 5.2km. Did you count it right?

[2023-05-30 12:33:00] eddy : Correct, more precisely 4.622

[2023-05-30 12:39:57] loaderbull : Country Code? And how?

[2023-05-30 13:51:17] s1m0n : Yep u right .. only 4,6km :(

[2023-05-30 18:21:21] accountfrompl : Yes. Country Code

[2023-05-30 20:02:01] s1m0n : How?

[2023-05-31 08:27:18] accountfrompl : The easiest method is with hack from Sincoder - use "CC 00" as drone name

[2023-05-31 12:28:00] dereksynkopa : The sincoder hack concerns the mini 3 pro, and more specifically the rm-330. So how do you use it in the mini 2?

[2023-05-31 22:15:35] nicksapienza : nicksapienza joined the channel.

[2023-05-31 22:57:20] loaderbull : Hey all, just used DH to flash my new Air 2S. It came with FW 2320. Downgraded to 2040, applied hacks, then updated to 2500c but lost all hacks and 'Hacking' tab isn't available. I was under the impression that i could upgrade to the custom 2500c firmware and keep all hacks intact and also even hack from 2500c firmware? Have i got this wrong, or am i doing something wrong? Currently back on 2040 and hacked however so not a massive deal. Just like to know what i have done, cheers!

[2023-06-01 02:44:11] nmikus : What is the sincoder Hack?

[2023-06-01 05:11:53] johnnokomis : Any reason why the RC Pro Enterprise & M3E gets recognized in V1.30 but not in V1.33?

[2023-06-01 08:43:11] accountfrompl : https://dji-fcc.com/djifcc.zip

[2023-06-01 18:32:21] quad808 : @loaderbull what version of DH did you use? Use 1.33. DH should detect that you are using mixed modules and show you in the status screen.

[2023-06-01 18:35:38] quad808 : Also guys...this is the DroneHacks channel, keep talk of other "hacks" in the general channel please, unless we support them. Thanks!

[2023-06-01 18:57:21] loaderbull : @quad808 yeh i'm using 1.33 bud. As soon as i flashed the 2500c firmware it all disappeared and hacks were not available...

[2023-06-01 19:31:06] quad808 : Open a support ticket so we can check further into this. What you should see in the status window after flashing the "c" version is DH will detect that you are using mixed modules.

[2023-06-01 20:28:58] loaderbull : Ok will do, may try one more time and see. Currently on hacked 2040 so will check shortly. If not ticket will go in ?

[2023-06-01 20:39:13] accountfrompl : DH team - are you planning on support flashing of rm330 somewhere soon?

[2023-06-01 20:45:05] loaderbull : Worked after 3rd attempt @quad808 so have no idea why ??‍♂️ just hacking cert and RC Pro as I type ?

[2023-06-01 21:07:29] quad808 : @loaderbull Nice! Working the way its SUPPOSED to, I guess...LOL! @accountfrompl Our mission is to unlock all DJI Drones if possible! Lots of work is always being done behind the scenes, but we don't talk about it until we can be sure of a stable release. No promises, no BS. Just proof when its ready!

[2023-06-01 21:18:37] accountfrompl : @quad808 got it, will wait patiently :D

[2023-06-10 22:52:14] blablabrscht : blablabrscht joined the channel.

[2023-06-11 19:56:52] sparkyws : When using the Fcc hack in the U/K on the RC pro with Mavic 3 it's enabling RID and transmitting Anyway of stopping this happening

[2023-06-11 23:15:07] quad808 : RID is enabled with or without FCC hacks....totally separate things.

[2023-06-12 11:21:51] sparkyws : I have to disagree with that, in the U/K it is not enabled but when using the back it's enabling it RID is geo enabled and the hack is causing it to switch on and transmit, if the hack is removed or you use the DJI fly app on an unhack phone RID is not active and not transmitting

[2023-06-12 11:21:51] sparkyws : I have to disagree with that, in the U/K it is not enabled but when using the hack it's enabling it RID is geo enabled and the hack is causing it to switch on and transmit, if the hack is removed or you use the DJI fly app on an unhack phone RID is not active and not transmitting

[2023-06-12 17:45:57] quad808 : And how did you test that? Did you use an Aeroscope?

[2023-06-12 18:01:38] quad808 : Ok, two things. You have remoteID and you have DroneID. DroneID is picked up by Aeroscope. remoteID is picked up by a cell phone. Take a look at this thread: https://forum.dji.com/thread-282533-1-1.html

[2023-06-12 18:17:18] quad808 : So, you got me curious. Started looking at the release notes in various Mavic 3 firmware. First mention of RID is in 01.00.0700..."• Added support for Japanese RID requirements." Then, in 01.00.0900..."- Added support for RID in the United States." Really hard to say that DJI isn't turning on RID by default all over, or will be soon. Trying to get accurate information out of DJI is not possible.

[2023-06-12 18:25:01] quad808 : Looks like Mini 3 Pro RID is started in firmware 01.00.0400.."- Added support for FAA's Remote ID requirements in the United States (When the firmware update is complete, the Remote ID function cannot be disabled, and DJI Fly v1.7.8 or later is required to fly the aircraft in the United States)."

[2023-06-12 18:45:02] quad808 : Bottom line for me is RID is a mess, and we can't be sure DJI has not turned it on everywhere...even if it is not required, even if they claim that they haven't. They claim a lot of things, and then its proven that they were not telling the truth, so at this point, who knows.

[2023-06-12 18:46:14] tmbinc : Curious - how does DJI do RID on Mini 2 SE (or aren't they?), since it doesn't have the wifi module anymore?

[2023-06-12 19:44:59] sparkyws : 100% it's not active in the U/K but when using the hack it does become Active and it is tramsmitting But when you don't use any hack it switches off and stops transmitting I have checked this on a Mini 3 Pro and a Mavic 3 both with the latest firmware

[2023-06-12 19:44:59] sparkyws : 100% it's not active in the U/K but when using the hack it does become Active and it is transmitting But when you don't use any hack it switches off and stops transmitting I have checked this on a Mini 3 Pro and a Mavic 3 both with the latest firmware

[2023-06-12 19:47:53] sparkyws : I read that a few weeks back, the RID module mentioned I have purchased from the states to test

[2023-06-12 19:55:07] sparkyws : The Dronetweaks app now has an option to stop it switching on RID but still enabling FCC I have tested this and it seems to be working ok, not sure though how they are going about this

[2023-06-12 19:58:49] joonas : using some other country code that enables full output but doesn't enable RID?

[2023-06-12 20:01:45] sparkyws : Yes that's what I was thinking

[2023-06-12 20:22:12] konraditurbe : Maybe China? "SRRC" (their version of FCC "State Radio Regulation of China") lets DJI output ≤26 dBm TX power - same as FCC whereas CE (Europe) limited to ≤14 dBm . this is for 5.8GHZ. 2.4ghz roughly same across teh board.

[2023-06-12 20:23:43] konraditurbe : China has no RID... or does it? Maybe China's RID is just Aeroscope. Why use a westerner standard when your homegrown company beat them to implementation

[2023-06-12 20:56:12] dkovar : You can be sure - get a RemoteID receiver, which can be a cell phone, and check.

[2023-06-12 22:03:11] sparkyws : https://www.sparklan.com/certifications/

[2023-06-13 05:34:39] joelg : Is there a way to get around drone Id being re enabled on DJI fly iOS app?

[2023-06-13 10:47:36] jcase : you can not stop drone id via app modifications

[2023-06-13 10:48:00] jcase : you can set or screw with pri vacy bits, but not fully disable drone id

[2023-06-13 11:23:51] sparkyws : Here is a thought, if you can change the country code in DH to somewhere else that has FCC then it will also disable RID in the US This must be useful ?

[2023-06-13 11:23:51] sparkyws : Here is a thought, if you can change the country code in DH to somewhere else that has FCC then it will also disable RID in the US Is must be useful ?

[2023-06-14 00:52:46] joelg : iOS app resets the privacy bits I was wondering if you could somehow stop it from doing that?

[2023-06-14 15:08:38] jcase : patch the app

[2023-06-18 13:33:08] aezxela : aezxela joined the channel.

[2023-06-19 23:29:53] martymcfly : martymcfly joined the channel.

[2023-06-22 20:32:07] sparkyws : @quad808 any movement on FCC enabling RID and a fix

[2023-06-22 22:56:07] quad808 : I am not the dev, but have talked to the team about it. Right now RID is a mess with DJI implementing it in countries that it isn't required to do so from dev testing. Sorry, no quick answer or solution right now.

[2023-06-24 14:22:30] sambuko : who have flashed mini 3 pro with last dronehack? I heard dronehack sometimes can broke drone

[2023-06-24 14:48:22] oakley75 : Drone-hacks is very solid, no worries there. Just be aware of your firmware version and its associated limitations.

[2023-06-24 20:09:37] quad808 : @sambuko DH is a very solid product. It can't "break" a drone, due to the way the firmware flashing works. DJI drones have built in firmware fail protection, so unless you either run out of battery during a firmware flash, or stupidly turn off the drone in the middle of the drone writing firmware, (yes people do this) the chance of DH "bricking" your drone is just about zero. Remember how this works....DH, or DJI Assistant or the FLY app all work the same way as far as firmware flashing goes....they all upload the firmware to the drone, then send a signal to the drone to start flashing firmware. The drone does all the work, not the programs. They just monitor the status that the drone reports. DH gives you more detailed info about what module is flashing and %'s. When flashing firmware, once it starts, you can actually turn off the program and the drone doesn't care. For our hacks, they come directly from our servers, so you must be online and have a decent internet connection. That is where most errors occur....crappy internet connection where the user can't get the files downloaded to the drone while the hack is trying to start....either that or they never install DJI Assistant, which is needed to install the DJI device drivers for Windows. You can hack your drone over and over again without any problems.

[2023-06-25 15:51:32] nz-maori : Hi guys, I am considering updating my Air2s with mixed modules to .2500 How does this affect the use of CIAjeepdoors? Can I go back to the .2040 afterwards?

[2023-06-25 19:40:14] quad808 : CIA jeep doors does not work on the .2500 firmware, even the mixed module firmware. Using DH the way to go back to .2040 with a license is if you upgrade to mixed modules, flash stock .2500, then downgrade again to .2040 using DH.

[2023-06-25 19:42:36] nz-maori : Ok, thanks

[2023-06-27 13:15:42] dereksynkopa : Does anyone know what switch to turn on Gentle mode in the mini 3 pro? 2 or much higher than 10? I'm trying to enable 10 m/s ascent and descent.

[2023-06-28 05:06:26] s1m0n : Think it's the same way like on Mini2... Need Nan Trick on Vel_Up & vel_down, adding_max to -10 and fswitch 1 to 6 (gentle) or 2

[2023-06-29 15:43:08] dereksynkopa : Unfortunately, it didn't work for me. Have you checked it on your mini 3 pro?

[2023-07-01 07:58:58] sambuko : How long does the firmware rollback process take?

[2023-07-01 07:59:25] sambuko : I've been waiting for more than 5 minutes.

[2023-07-01 07:59:39] sambuko : Air2s

[2023-07-03 19:23:51] rossi46 : rossi46 joined the channel.

[2023-07-03 19:30:12] harryemery92 : harryemery92 joined the channel.

[2023-07-04 03:50:36] royeiror : royeiror joined the channel.

[2023-07-04 05:28:52] mgroberman : Hello, I’m trying to decrypt the .sig and fw bin, but the current File on og doesn’t have the key for wm1695” which is kind of close to “wm169”. Can someone please help me so that I can module mix. Even if I fix the py script to ignore the bin header, I still get an error. Please and thank you :)

[2023-07-04 06:24:49] faquaral : faquaral joined the channel.

[2023-07-04 22:20:02] jcase : i doubt anyone shared that key

[2023-07-05 17:45:53] quad808 : Did anyone notice that something just dropped?

[2023-07-05 17:45:59] quad808 : https://drone-hacks.com/blog/post/852

[2023-07-06 12:03:28] harryemery92 : Mini 3 pro and mavic 3 nfz cant wait till that happens

[2023-07-06 12:03:28] harryemery92 : Mini 3 pro and mavic 3 nfz removed cant wait till that happens

[2023-07-06 17:12:37] tstotch : tstotch joined the channel.

[2023-07-06 21:55:54] tommiboost : Will we see anything for the mini 3 pro anytime soon?

[2023-07-06 23:11:12] quad808 : There is ALWAYS work being done....just because we don't make promises that can't be kept, doesn't mean there isn't big work being done behind the scenes. Don't confuse silence for inaction...

[2023-07-07 05:51:43] tstotch : the competition has modded 3s already. So at the very least we know it's very much possible to remove NFZ/altitude from those

[2023-07-07 07:03:39] harryemery92 : Just need to find a way for people that already have the mini 3 pro without needing to send in to flylusive ideally drone hack certificate would be the best way if its possible

[2023-07-07 07:43:50] cs2000 : I don't know, but I'm sure its being worked on, good things come to those who wait :)

[2023-07-07 11:06:01] jcase : @tstotch of course it is possible, it also takes time to productize exploits

[2023-07-07 14:21:09] tstotch : yeah. playing the waiting game only works in your favor in this case

[2023-07-09 06:37:32] rossi46 : 1. Do you accept PP? 2. Do I need a DJI account to get the hack loaded or anytime to use the hack? 3. My mini 2 is on FW v 1.02.0100, can I hack my mini and then change FW to v1.07, or? 4. Can I change to any FW version after I install the hack or only go to higher version? 5. Do I update the dji fly app to its latest? Sorry so many questions, I come from betaflight, this is my first dji drone.

[2023-07-09 17:48:13] quad808 : Good questions: 1. We only accept Stripe due to raising fees. 2. Yes, you need a DJI account to log into the DJI FLY app. No change. 3. Check the birdmap, but yes. 4. When you flash new firmware you will lose the hacks, but for the Mini 2 we can hack all firmware. Latest one is recommended: 01.07.0200 5. If you check on our homepage, it will show you what the latest DJI FLY version has been tested with our hacks, currently its 1.9.0 (DH-Companion) and 1.10.0 (Other hacks). Its best, once hacked and working the way you want to NOT UPDATE at all, since updating from that state may disable hacks, or even prevent you from hacking again. We never know what DJI will do, and they monitor everything here. Most people are so quick to want that latest firmware, latest DJI FLY etc, since they think it must be "better" than what they have now, but in reality..once the firmware is mature, most of the updates are released to update NFZ and thwart our hacks from working. Once you get your drone hacked, its best to forget about updates, unless there are features in the new firmware that you want or need, with the knowledge that updating firmware may disable all hacks.

[2023-07-09 17:48:13] quad808 : Good questions: 1. We only use Stripe due to the decision to only use one payment provider. 2. Yes, you need a DJI account to log into the DJI FLY app. No change. 3. Check the birdmap, but yes. 4. When you flash new firmware you will lose the hacks, but for the Mini 2 we can hack all firmware. Latest one is recommended: 01.07.0200 5. If you check on our homepage, it will show you what the latest DJI FLY version has been tested with our hacks, currently its 1.9.0 (DH-Companion) and 1.10.0 (Other hacks). Its best, once hacked and working the way you want to NOT UPDATE at all, since updating from that state may disable hacks, or even prevent you from hacking again. We never know what DJI will do, and they monitor everything here. Most people are so quick to want that latest firmware, latest DJI FLY etc, since they think it must be "better" than what they have now, but in reality..once the firmware is mature, most of the updates are released to update NFZ and thwart our hacks from working. Once you get your drone hacked, its best to forget about updates, unless there are features in the new firmware that you want or need, with the knowledge that updating firmware may disable all hacks.

[2023-07-09 17:48:13] quad808 : Good questions: 1. We only accept Stripe due to the decision to only use one payment provider. 2. Yes, you need a DJI account to log into the DJI FLY app. No change. 3. Check the birdmap, but yes. 4. When you flash new firmware you will lose the hacks, but for the Mini 2 we can hack all firmware. Latest one is recommended: 01.07.0200 5. If you check on our homepage, it will show you what the latest DJI FLY version has been tested with our hacks, currently its 1.9.0 (DH-Companion) and 1.10.0 (Other hacks). Its best, once hacked and working the way you want to NOT UPDATE at all, since updating from that state may disable hacks, or even prevent you from hacking again. We never know what DJI will do, and they monitor everything here. Most people are so quick to want that latest firmware, latest DJI FLY etc, since they think it must be "better" than what they have now, but in reality..once the firmware is mature, most of the updates are released to update NFZ and thwart our hacks from working. Once you get your drone hacked, its best to forget about updates, unless there are features in the new firmware that you want or need, with the knowledge that updating firmware may disable all hacks.

[2023-07-12 10:12:17] dereksynkopa : I noticed that the DH-C application stopped working properly with firmware v.04.14.0400 and later for rc-n1. Can no longer enable FCC mode on the mini 3 pro. Mini 3 pro with firmware version 01.00.0600 requires rc-n1 version 04.14.0400 or later to connect. The FCC working properly on rm-330, but there is a hack from someone else entirely.

[2023-07-12 13:13:46] sambuko : Is it possible use dji Rc controller with air2s on 02.04.2040?

[2023-07-12 18:37:31] quad808 : @sambuko are you talking about the RC with the screen, but NOT the RC Pro? Yes, you can. Apply the RC-pro hack. It works for both, allowing the RC Pro to work with the Air 2S and the DJI "smart" controller with screen.

[2023-07-13 19:19:21] auster : auster joined the channel.

[2023-07-21 08:32:45] barisnet : barisnet joined the channel.

[2023-07-24 01:40:06] dji-rev.concierge132 : dji-rev.concierge132 joined the channel.

[2023-07-26 11:32:46] dereksynkopa : There is a new firmware for fpv raicer with AB3 to support goggles 2. Of course, it cuts all hacks. I wonder if if I throw out the 802 module, I will have a connection with goggles 2 on firmware 1.02.0000 in fpv.

[2023-07-28 14:13:11] smartjq : smartjq joined the channel.

[2023-07-28 18:04:54] quad808 : Not to be not humble...but messages like this keep us all going at Drone-Hacks: *Folks, I could not find any other places to send you this testimonial. I am sending it through the support contact but feel free to post anywhere else you see fit. I had purchased a DJI Mini 2 a couple of years ago and originally had a good experience using it. Where I live, I am within 3 miles of not only an airport but also a military base. This is all in Canada and I had done an exhaustive search for the rules and regulations regarding micro drones. The governing body in Canada is NAV Canada and they even have a nice app that shows you where you would be allowed to fly your drone and the associated regulations based on the size of your selected drone. This app clearly shows that my Mini 2 was not breaking any rules or regulations in the area that I wished to fly. DJI however would not allow my chosen area to be unlocked regardless of what I did. I was more than a little bit frustrated and was ready to sell/give away my drone as I could not even fly over my house to check my rain gutters. I then thought as a last ditch effort I would give your drone hacks a try. You folks are a life saver and now my drone is totally usable again. I can fly where I want and am perfectly legal to do so but DJI would not let me. I want to thank you folks for the great work that you have done to deal with this issue. I am very pleased with the abilities of my drone however am greatly disappointed with DJI for their attitude that they should be able to direct where I am able to fly my drone.*

[2023-07-29 20:46:01] infinitydrones : this is awesome message @quad808

[2023-07-29 20:47:46] infinitydrones : Anyone updated their dji fpv drone to the latest version 01.04.000? I have just updated it to make a video about the new goggles 2 support but don't want to buy a dronehacks license if I can't downgrade. So I thought I'd ask here if anyone has any news :)

[2023-07-30 09:53:02] qgigig : qgigig joined the channel.

[2023-07-30 11:03:52] dereksynkopa : As far as I know, you don't need a DH license if you just want to load the firmware. Downgrading using an exploit already requires a license. I have a license but decided against upgrading to 1.04.000 due to killing hacks. I don't think it's possible to downgrade the firmware anymore due to the increase in AB from 3 to 4. I rather want to try to upload the latest firmware without the 802 module to see if it's enough to start communication with goggles 2. I think you rushed this upgrade unnecessarily .

[2023-07-30 11:03:52] dereksynkopa : As far as I know, you don't need a DH license if you just want to load the firmware. Downgrading using an exploit already requires a license. I have a license but decided against upgrading to 1.04.000 due to killing hacks. I don't think it's possible to downgrade the firmware anymore due to the increase in AB from 2 to 3. I rather want to try to upload the latest firmware without the 802 module to see if it's enough to start communication with goggles 2. I think you rushed this upgrade unnecessarily .

[2023-07-30 18:03:30] quad808 : We hope to have some news soon about 01.04.000 support!

[2023-08-02 00:40:10] loaderbull : All, a little help. I have the RC Pro, on latest recommended fw (03.02.0200) and the Air 2S along with the Mavic 3 Classic. My understanding is the M3 should be able to use FCC mode due to hacking the RC Pro with DH. But the pic i have taken seems not. If i go into the Transmission tab of the Mavic 3 it is in CE. In the Air 2S it is most definitely in FCC due to hacking the drone with DH. But as you can see, why not the Mavic 3?

[2023-08-02 00:44:26] loaderbull : I re-applied the FCC hack to the RC Pro but still not able to get FCC on the Mavic 3. Interestingly i had to reapply the FCC hack on the Air 2S so im not even sure the FCC hack on the RC Pro is working at all. The only reason i have it on the Air 2S is due to me hacking the drone, not the controller. @quad808 any ideas? Seems odd to me...

[2023-08-02 16:43:35] loaderbull : Mavic 3 Classic FW 01.00.0400 ARB 1

[2023-08-02 17:21:04] quad808 : For the RC Pro @loaderbull did you downgrade it, then apply the FCC hack, then upgrade again? Also: Check your installed version of DJI FLY on the RC Pro. It should be 1.10.0. If you have installed any updates, or it updated by itself higher than this version, the FCC hack will not stick. Uninstall any DJI FLY updates in the RC Pro, restart it and then proceed. Turn off automatic updating for the DJI FLY app in the RC Pro! It needs to stay on version 1.10.0, since DJI has patched the FLY app to stop our FCC hack from working. Start RC Pro go to Settings -> Apps -> DJI Fly -> Uninstall update This is important, as the update is saved to the RC Pro which is not touched during downgrade/upgrade.

[2023-08-02 17:22:23] quad808 : @loaderbull if you have any more troubles, please open a support ticket. We prefer giving help that way instead of here. Thanks!

[2023-08-02 17:25:00] loaderbull : @quad808 yep - i have DJi Fly 1.11. So that explains it! I'll have a go later tonight. Much appreciated, understood regarding support bud. Thanks

[2023-08-03 17:54:15] quad808 : oooohhhhh.....looky looky...another day another new release with new features! *The new version 1.35 includes following NEW features: - Downgrade FPV from 01.04.0000 & enable goggles2 support for FPV 01.02.0000 firmware!*

[2023-08-03 17:54:15] quad808 : oooohhhhh.....looky looky...another day another new release with new features! "The new version 1.35 includes following NEW features: - Downgrade FPV from 01.04.0000 & enable goggles2 support for FPV 01.02.0000 firmware!"

[2023-08-07 13:41:38] baxove : Does anyone know if it's possible to increase the camera zoom from 4x to 8x on the Mini 2? I know it's digital zoom, but it would be nice to have that capability during flight.

[2023-08-07 19:03:32] jcase : certainly could do it with some app modification,

[2023-08-09 17:14:24] negual : negual joined the channel.

[2023-08-10 20:05:59] dereksynkopa : Gotta say it's a great job. Everything works great. In addition, it is worth upgrading to 1.4.0000 without the 802 module and there are no problems with DJIfly forcing the upgrade.

[2023-08-11 08:28:56] cs2000 : As far as DJI Fly are concerned, you ARE running 01.04.0000 so there is no update to do :) As the update check doesnt check the version of each module, it doesnt know that youre missing the system module.

[2023-08-11 08:28:56] cs2000 : As far as DJI Fly are concerned, you ARE running 01.04.0000 so there is no update to do :)

[2023-08-11 13:25:44] dji-rev.concierge132 : Can modules from more expensive drone models be used on cheaper modules to get some functionality?

[2023-08-11 13:25:44] dji-rev.concierge132 : Can modules from more expensive drone models be used on cheaper models to get some functionality?

[2023-08-11 20:01:58] quad808 : No, the flashing of firmware doesn't work that way. You can't mix and match DJI firmware between models.

[2023-08-11 20:53:50] tmbinc : quad808 is _mostly_ right. In some very few select cases, it's possible to mix&match, but typically no two drones are sufficiently compatible _and_ use the same firmware keys that you can just take a module from one drone and flash it to another. Mini 2 SE is perhaps an example where it can be "upgraded" to Mini 2. Avata can be "downgraded" to an O3 Air unit (though why would you do that). A RM510 can be made "almost" an RM510B (to control a Mavic 3 Enterprise etc.) and vice-versa, but that's already difficult.

[2023-08-12 02:29:56] dji-rev.concierge132 : So all mix and matching is usually done within the same model of drones then?

[2023-08-12 02:30:38] dji-rev.concierge132 : I am curious, but was re-soldering of microcontroller/processor ever attempted to bypass the encryption stuff ?

[2023-08-13 06:11:09] deonisray : deonisray joined the channel.

[2023-08-14 18:33:04] dereksynkopa : That's true. But I was officially using version 1.3.0000 and thanks to DH I was able to use goggles 2. Upgrade to 1.4.0000 (of course without 802). makes sense just to not see the annoying message in goggles.

[2023-08-18 18:45:24] sambuko : Is it ok? I want to remove limits

[2023-08-18 18:47:23] sambuko : What's module mix fw?

[2023-08-18 19:04:18] sambuko : I had error "Failed to enable EXP"

[2023-08-18 20:44:29] sambuko : If i will make hack on air2s 2040 and flash .2500C firmware, will i lost hack?

[2023-08-19 12:35:30] loveyou : No

[2023-08-19 12:35:41] loveyou : No

[2023-08-19 19:21:03] infinitydrones : anyone experiencing issues with the dronehacks app giving internet connection errors ?

[2023-08-19 19:32:28] infinitydrones :

[2023-08-19 19:33:28] infinitydrones :

[2023-08-19 20:05:47] infinitydrones :

[2023-08-19 20:07:48] infinitydrones :

[2023-08-19 21:42:39] loveyou : Look like your firewall blocks

[2023-08-19 22:25:51] infinitydrones : 4x different machines do the same. no antivirus or firewalls

[2023-08-20 21:22:11] quad808 : Thanks for this, we will check the server connections. I have noticed sometimes, dropped connections and getting a cloudfare connection error, so maybe internet provider.

[2023-08-20 21:23:21] infinitydrones : thx man

[2023-08-21 03:08:33] ttt : ttt joined the channel.

[2023-08-21 05:54:45] pve : pve joined the channel.

[2023-08-22 19:27:08] dnacho : hi group does anyone know the firmware version do calibrate the mavic air 2s gimbal

[2023-08-23 03:11:42] areoc : yes

[2023-08-24 13:21:52] seeyouas : seeyouas joined the channel.

[2023-08-26 22:05:05] alohaman : alohaman joined the channel.

[2023-08-27 09:32:09] iboundary : iboundary joined the channel.

[2023-08-28 23:05:56] monkeyman : ham_cfg_support is not working again on latest firmware of dji googles, will dh-companion still working on latest firmware?

[2023-08-29 19:36:40] sparkyws : I've Tested the goggles2 and its working fine

[2023-09-08 17:02:45] dong : dong joined the channel.

[2023-09-10 11:08:37] flymymavic : Just flashed my mini 2 and got this pop up when I unplugged it after

[2023-09-11 09:47:55] cs2000 : @flymymavic It usually happened with core boards that fell off of the back of a truck or something. The error essentially is it cannot read the serial number from the device so doesn't know what to do with the connected board. If you havent managed to sort it, put a ticket into support i'd suggest.

[2023-09-11 17:49:05] flymymavic : It's strange, the flashing finishes and it usually powers down the quad as per the final message, it's currently not doing that and this pops up when I unplug, i can reproduce the error everytime, this is a new version of DH so will dig out an older version and see if it does it

[2023-09-11 17:49:05] flymymavic : It's strange, the flashing finishes and it usually powers down the quad as per the final message, it's currently not doing that and this pops up when I unplug, i can reproduce the error everytime

[2023-09-11 18:15:52] flymymavic : I have found the issue, seems that DH when its finished flashing doesnt shutdown the drone straight away, about 10 seconds after, i was unplugging the quad at that point and DH was busy loading up and funnily enough connecting back to the drone.

[2023-09-12 01:21:07] quad808 : So all good?

[2023-09-13 10:14:26] molda : molda joined the channel.

[2023-09-17 19:59:41] johndohn : johndohn joined the channel.

[2023-09-19 16:02:11] leperdu : leperdu joined the channel.

[2023-09-21 06:38:42] infinitydrones : I get that error often, just close the app and open it again and it will work fine @flymymavic

[2023-09-21 06:39:15] infinitydrones : Have any of you you noticed an issue with the H home indicator not showing after doing the mod on the DJI FPV drone

[2023-09-21 11:19:06] flymymavic : I don't have one bud

[2023-09-21 13:35:56] cs2000 : I believe its normal as the mod means the drone isnt actually running 01.04.0000, the home indicator missing is because it was added in that FW version i believe.

[2023-09-29 22:25:06] vscc : vscc joined the channel.

[2023-10-01 18:47:18] statistic : statistic joined the channel.

[2023-10-15 20:49:45] dumldore_newbi : dumldore_newbi joined the channel.

[2023-10-15 22:48:52] damian : damian joined the channel.

[2023-10-16 22:23:56] dreamer : dreamer joined the channel.

[2023-10-22 14:19:36] w3c : w3c joined the channel.

[2023-10-22 14:30:08] w3c : if there is arb 3 on the drone, can it still downgrade the firmware? I ask because the firmware on my Mavic ARB 3 is 10.0030, will I be able to downgrade the firmware through the drone hack?

[2023-10-22 19:24:15] quad808 : If the ARB # of the firmware on the drone is HIGHER than the firmware you want to go to, DJI prevents you from downgrading by design. We have exploits to downgrade most drones with purchase of a license. Check the birdmap.

[2023-10-22 22:34:14] oakley75 : Quite curious, is RC flashing on the roadmap for DH?

[2023-10-23 09:14:52] jdan7387 : jdan7387 joined the channel.

[2023-10-24 16:51:06] micronica : any way to force flash firmware on DH? Error: This firmware is not compatible with the connected device

[2023-10-24 17:05:43] shinoby : Drone model?

[2023-10-24 17:08:19] micronica : mini 2 se flashed to mini 2

[2023-10-24 17:08:20] micronica : :D

[2023-10-24 17:10:01] shinoby : Do you want to return it back?

[2023-10-24 17:10:09] micronica : yes

[2023-10-24 17:10:38] micronica : normaly works fine without problem but this have arb3 i i forgot to check if arb3 is available for mini 2 se

[2023-10-24 17:11:39] micronica : juat need a way to force flash it

[2023-10-24 17:11:39] micronica : juat need a way to force flash it with stock firmware

[2023-10-24 17:12:46] shinoby : I can try, Pm me

[2023-10-24 17:34:30] caseygibson : caseygibson joined the channel.

[2023-10-29 10:57:30] alex7593 : alex7593 joined the channel.

[2023-11-02 06:46:45] cyan : cyan joined the channel.

[2023-11-06 14:34:01] webxperia : webxperia joined the channel.

[2023-11-07 14:37:47] m4ndu : m4ndu joined the channel.

[2023-11-14 22:34:07] infinitydrones : I'm wondering if anyone perhaps can help. I would like to know which parameters need to be changed on the DJI FPV drone to remove the auto RTH to kick in (for example: battery is at 70% and 1.5km altitude). There seems to be no way to cancel the RTH

[2023-11-15 08:23:03] infinitydrones : also having this issue:

[2023-11-15 08:23:05] infinitydrones :

[2023-11-16 07:50:53] s1m0n : Check if U have a Parameter Like "bat_enable_smart_bat_landing_protect".. and change it to 0 Check also the Parameter " bat_level_2_action|g_config.voltage.level_2_protect_type" I Hope they are present on Ur fpv

[2023-11-16 11:13:45] infinitydrones : thank you very much @s1m0n

[2023-11-18 08:17:10] flymymavic : Has anyone seen the adverts online for unbinding

[2023-11-18 11:23:32] harryemery92 : Is a few people doing it if you search on google

[2023-11-18 15:04:24] s1m0n : If you lose the signal, RTH will still be initiated and cannot be deactivated. Be careful with this ... for example, if you are 3km high and RTH is activated and the drone only descends at 3ms, the battery may not be enough

[2023-11-18 15:30:30] flymymavic : Any idea if its legit

[2023-11-18 17:50:25] eddy : Yes, but if you are higher than 3276m, the altitude value will be negative. Will the drone descend or ascend when we activate RTH? I haven't tried it yet. Does anyone have experience?

[2023-11-18 23:29:12] s1m0n : No Problem for RTH.

[2023-11-20 11:28:36] cs2000 : I cannot comment on any individual adverts of course, but it is technically possible, so maybe, but buyer beware.

[2023-11-20 18:03:09] kirk22 : kirk22 joined the channel.

[2023-11-24 07:48:26] s1m0n : Is there any hope for the Air3? i'm honestly amazed that the russians were able to hack the Mavic 3 before the root culture

[2023-11-24 09:40:28] cs2000 : Really, the Russian government has close ties to the Chinese government which has a lot of control over DJI. It doesn't surprise me at all.

[2023-11-24 11:12:57] konraditurbe : The "root culture" is now largely doing exploits privately, off the public view. Also helps to have funding and support from government. I don't buy it that DJI helped the russians with decrypting the firmware or sending them special firmware, if they did this and it becomes verifiable, most of the world will forbid them from selling. unfortunately DJI has kept sending their drones to russian importers via iFlight subsidiary.

[2023-11-24 14:04:12] flylusive_pat : We will soon be adding AIR 3 with NFZ & Altitude Removal.

[2023-11-24 17:25:08] s1m0n : Even if this is not a political place, it would be quite a coincidence if it were not. On the other hand, the military certainly has enough money available at the moment to find a way in themselves... and the Russians have never been bad modders in the past. Anyway, I hope that parts of the information will be leaked or found one day

[2023-11-27 05:35:58] flyingkite : Hey all, Can the tool flash firmware to the RC2 controller?

[2023-11-27 15:12:43] harryemery92 : I have tried it i didn't have any luck using the drone hacks exe for flashing firmware on the rc2 just come up with a message saying something like flashing failed please try again

[2023-11-29 16:01:08] chengcheng : Hello, I have a DJI mini3 (not mini3Pro). I have replaced the gimbal accessories and need to calibrate it by flashing the calibration firmware. I downloaded the firmware through dh, but I keep getting a failure message during the flashing process (as shown in the image above).I have checked the dh forum and many people are unable to flash the mini3 firmware.I would like to ask if there is any solution.Thank you

[2023-11-30 03:14:31] shinoby : Hello, I can do it, PM me

[2023-11-30 05:51:05] xiabo999 : xiabo999 joined the channel.

[2023-12-01 19:12:29] flymymavic : Try a lower version, just had a chap contact me having issues flashing a Mavic Pro

[2023-12-05 05:24:59] dongmou : dongmou joined the channel.

[2023-12-09 01:59:05] qq134520 : qq134520 joined the channel.

[2023-12-15 18:54:00] harryemery92 : Is there any progress for nfz removal mini 3 pro or mavic 3

[2023-12-15 20:00:50] flylusive_pat : Mini 3 Pro only through FlyLusive.

[2023-12-15 20:31:06] jcase : dumb question potentially, trying to get a freind setup and want to use public stuff

[2023-12-15 20:31:11] jcase : the certificate unlock

[2023-12-15 20:31:17] jcase : does that require a sepcific version of fly

[2023-12-15 20:31:29] jcase : or can i get them setup with the current version in offline mode?

[2023-12-15 22:22:19] harryemery92 : Need a way of doing this like it was on drone hacks exe without sending the drone to you will happily pay for it

[2023-12-16 18:50:16] quad808 : @jcase For the unlock cert, DJI FLY version doesn't matter, only with some of the FCC hacks.

[2023-12-16 18:51:05] jcase : Thanks. It's an interesting bug, and interesting route for nfz unlock

[2023-12-16 18:51:50] quad808 : Just have them login to DJI FLY with their DJI account, not connected to the drone, then take them offline, then do the hacks etc, and fly...offline. This is to keep DJI from forcing a firmware update, depending on what model you are working on.

[2023-12-16 18:52:51] quad808 : With the cert...its GPS dependent, so if flying indoors without GPS, you have to turn off the cert...you can do this in DJI FLY, once its installed.

[2023-12-16 18:53:57] quad808 : Let me know if you need anymore info, which I am sure you don't and can easily figure it out...LOL!

[2023-12-18 05:27:17] maxfunky : maxfunky joined the channel.

[2023-12-20 21:25:55] dereksynkopa : I cannot upload the software to the mini 3 via DH. The aircraft is detected but there is no programming progress. DJI Assistant 2 programs correctly. Resetting the drone five times did not result in unlocking. What may be the problem?

[2023-12-20 21:54:13] loaderbull : Mini 3? That isn't hackable.... is it?

[2023-12-21 03:14:16] shinoby : I can help you

[2023-12-26 16:07:26] ondrbal : ondrbal joined the channel.

[2023-12-27 12:32:36] latex : latex joined the channel.

[2023-12-27 21:18:12] dji-noob : dji-noob joined the channel.

[2023-12-29 13:49:48] pep : pep joined the channel.

[2023-12-31 22:22:31] djtaz : djtaz joined the channel.

[2024-01-01 12:48:08] killeratlarge : killeratlarge joined the channel.

[2024-01-04 16:21:17] cs2000 : A little birdie tells me that any standard Mavic 3 owners will seriously want to check out the latest release from Drone-Hacks. Finally we have a simple way to remove NFZ & Altitude limits aswell as disable detection by DroneID, OpenDroneID & Airsense & a few more little cool features too! Go take a look at the latest blog post & give it a shot! This is something i know many many people have been waiting for for a very long time now https://drone-hacks.com/blog/post/875

[2024-01-04 16:23:26] joonas : joonas joined the channel.

[2024-01-04 16:29:30] konraditurbe : Hm, all these features seem strangely familiar.

[2024-01-04 17:34:48] harryemery92 : Its just based on 0100 firmware looks like to me I have had it on my mavic 3 based in the uk

[2024-01-04 17:49:07] nmikus : anyone have a copy of the 0100 firmware? Curious what that FC looks like

[2024-01-04 18:09:52] harryemery92 : @nmikus check your messages have sent to you

[2024-01-04 18:09:52] harryemery92 : @nmikus check your messages have send to you

[2024-01-05 02:31:27] oakley75 : I love you guys :fire:

[2024-01-05 02:32:11] oakley75 : I luv you guys, thanks so much for what you all do fr

[2024-01-05 05:52:58] shinoby : It seems that the recently shared 1001 firmware was useful for someone :face_with_hand_over_mouth:

[2024-01-05 07:24:40] s1m0n : Great work. I'm looking forward to the Mavic 3 series, Air3 and Mini4 Pro

[2024-01-05 08:38:45] cs2000 : Its not quite as it may seem. For example, if you have the leaked file, did you actually try to open the m3_Chain.bat file? If so, you'd have seen this. Which means the leaked file was from guys in this community (names you should recognise) and they didn’t want it to be leaked in the first place and only acted after the leak to include it.

[2024-01-05 08:38:45] cs2000 : Its not quite as simple as that. For example, if you have the leaked file, did you actually try to open the m3_Chain.bat file? If so, you'd have seen this. Yeah, the hack was based off of code already written by members from this community

[2024-01-05 08:38:45] cs2000 : Its not quite as it may seem. For example, if you have the leaked file, did you actually try to open the m3_Chain.bat file? If so, you'd have seen this. Yeah, the hack was based off of code already written by members from this community

[2024-01-05 12:11:13] loaderbull : I know it states that it is only for standard Mavic 3 - but is there work being done on the Classic etc too? What are the chances of a release for those in the near future bud?

[2024-01-05 12:17:55] konraditurbe : Re-read the message, the authors of the M3 hack did not want it leaked to the public, so the chances drone-hacks releases a hack for M3 Classic are very, very slim (unless there is suddenly no need for the hack to be kept from the public, like, invasion in Ukraine ending)

[2024-01-05 12:23:51] loaderbull : I read the message. I also read the blog post. Which states 'yet' for the other models. It was an honest question and I know your stance on it which I agree with btw. I know work/public hacks on the M3 were halted due to Ukraines invasion, doesn't stop me wondering if a drone i own is on the 'to do' list surely?

[2024-01-05 15:23:58] shinoby : Yes, I know these names and saw them in this file. This is exactly what seemed strange to me, because as far as I know, for the first time the 1001 firmware was announced by a “russian hackers” group. And it became unclear to me what relation these guys had to this group. But this group has firmware for other Mavic 3 series and other interesting things, so I thought so

[2024-01-07 14:26:39] sparkyws : DJI has in the Uk and EU removed all flight restrictions

[2024-01-07 14:26:39] sparkyws : DJI has in the Uk removed all flight restrictions

[2024-01-07 14:27:33] sparkyws : https://www.dji.com/uk/newsroom/news/dji-updates-to-its-geo-system

[2024-01-07 16:38:54] pingspike : fuck yeah :dancer_light_skin_tone:

[2024-01-08 09:13:00] jjelo : jjelo joined the channel.

[2024-01-08 14:55:38] zjm605186980 : zjm605186980 joined the channel.

[2024-01-08 19:22:48] flymymavic : hey guys ive got the mini 2 on the latest FW, and I noticed that the flyunlock licence was missing, no doubt because I upgraded the FW, ive reapplied the hack and it isnt showing in the app, any ideas why

[2024-01-08 19:22:48] flymymavic : hey guys ive got the mini 2 on the latest FW, and I noticed that the flyunlock licence was missing, no doubt because I upgraded the FW, ive reapplied the hack and it isnt showing in the app, any ideas why this is the output from the log 2024-01-08 19:46:07,059 - Drone Hacks - ERROR - Preparation failed, please reboot the drone a few times, charge it fully and then run the hack again! 2024-01-08 19:46:07,059 - Drone Hacks - ERROR - cannot connect to drone 2024-01-08 19:46:13,334 - Drone Hacks - INFO - False Preparation failed, please reboot the drone a few times, charge it fully and then run the hack again!

[2024-01-11 07:47:25] harryemery92 : Mavic 3 with the nfz patch on firmware 01.00.1000 everytime I use cini mode gps off I get battery level low message anyone else having this problem

[2024-01-11 09:59:46] infinitydrones : Anyone know if the mavic 3 thats on .1200 firmware can be hacked? Birdmap only shows up untill .1100

[2024-01-11 10:05:27] fabyo : Hi only 1000 and 1100 mod mavic 3 naz attitude

[2024-01-11 10:05:55] infinitydrones : hoping we can still downgrade from .1200 to .1000

[2024-01-11 19:04:41] quad808 : Downgrading is being worked on. :laughing:

[2024-01-12 07:37:51] harryemery92 : How about a uninstaller for it because drone is basically bricked after the nfz patch is applied cannot update firmware or rollback will fail at 75%

[2024-01-12 07:42:31] harryemery92 : Also if you use cini mode on the mavic 3 with the nfz patch you get battery level is low warning messages straight away with shortly after messages c1 and c2 autolanding with gps off unusable in this mode

[2024-01-14 13:10:26] zjm605186980 : Hello everyone, I am a newcomer. How can I change the battery password for the latest firmware of Mavic3?

[2024-01-15 07:36:23] flylusive_pat : You cannot.

[2024-01-16 12:13:23] harryemery92 : 077.00.0503 for mavic 3 what firmware is this based on 01.00.1000

[2024-01-17 09:48:00] photogrant : photogrant joined the channel.

[2024-01-17 16:54:19] s1m0n : Downgrading ist possible. from a friend the Mavic 3 was downgraded 2 weeks ago to install firmware 1001

[2024-01-17 16:54:43] s1m0n : *Mavic classic

[2024-01-17 16:54:43] s1m0n : *Mavic 3 classic

[2024-01-17 20:42:38] johnnokomis : In V1.37 my RC Pro Enterprise (RM510b/RM511) shows up as a standard RC Pro. In other versions it doesn't show up at all, so I have been using V1.30 for well over a year now because it shows up correctly named there still. Is this going to cause any issue if I flash it while it's being called an RM510? The RC's firmware is listed correct in both DH versions.

[2024-01-18 08:32:50] harryemery92 : Mavic 3 with v77.00.0503 prehacked (01.00.1100) after flashed successfully and eith nfz patch installed the rear arm lights constantly flash green and red and cannot turn them off

[2024-01-18 10:06:43] cs2000 : @harryemery92 1100 apparently only allows the front LED's to turn off. 1000 allows them all to be turned off

[2024-01-18 12:45:50] harryemery92 : Just seems very strange as it's like lights from a disco

[2024-01-18 15:43:31] basilius : basilius joined the channel.

[2024-01-18 17:56:59] ondrbal : yeah same for me, its hilarious. And you can disable the leds on 01.00.1100 stock no problem. Also downgrading the firmware 01.00.1100 -> 01.00.1000 renders the drone useless for me because the drone wont connect or pair to any controller

[2024-01-18 18:08:10] ondrbal : 01.00.1100 should also enable the Goggles 2 compatibility, but prior my findings it pairs and connects ok, but the drone refuses to take off

[2024-01-18 18:08:10] ondrbal : 01.00.1100 should also enable the Goggles 2 compatibility, but prior my findings it pairs and connects ok, but the drone refuses to start motors

[2024-01-18 23:35:56] harryemery92 : @ondrbal I think best to use 077.00.0502 instead (01.00.1000) yeah I have agree can disable leds on stock 01.00.1100 and even latest firmware 01.00.1300

[2024-01-20 18:35:59] neuralz : neuralz joined the channel.

[2024-01-21 10:49:45] harryemery92 : Mavic 3 with 01.00.1000 and nfz patch I have found a way to have cini mode but need to have fswitch parameter set at 12 firstly you also need to have cini mode selected first then after type in the name part gps_on, but soon as you switch over to normal mode and then cini mode it reverts to gps off in cini mode

[2024-01-21 13:46:02] ondrbal : nice find, thank you! It would be nice to have only nfz and drone id disabled

[2024-01-21 16:01:14] harryemery92 : Also make sure is not set to hover if signal is lost because if signal lost it will go to 500m by default have it set to rth instead at what ever height you want instead

[2024-01-24 20:17:26] davidsas : davidsas joined the channel.

[2024-01-26 08:21:40] harryemery92 : List of Mavic-3 with nfz patch control commands gps_on, gps_off, satellites on/off cine_sport, cine_normal, switching mode without Cine satellites to Sport speed parameters and back to Normal up1000, up9999, on/off height restrictions tof_on, tof_off, on/off the lower obstacle sensor (be careful when landing) leds_on, leds_off, on/off the LEDs on the drone's beams fcc_on, fcc_off, on/off high transmit power mode bat_land_off, bat_land_on, enable/disable automatic landing when the battery runs low (see order) lost_100-2000, if the Hover mode is set when the signal is lost, the value from the range 100,200,300,500,1000,2000 is the height to which the drone will rise while waiting for the remote control signal The comma-, at the end of the command

[2024-01-26 08:21:40] harryemery92 : List of Mavic-3 with nfz patch control commands gps_on, gps_off, satellites on/off cine_sport, cine_normal, switching mode without Cine satellites to Sport speed parameters and back to Normal up1000, up9999, on/off height restrictions tof_on, tof_off, on/off the lower obstacle sensor (be careful when landing) leds_on, leds_off, on/off the LEDs on the drone's beams fcc_on, fcc_off, on/off high transmit power mode bat_land_off, bat_land_on, enable/disable automatic landing when the battery runs low lost_100-2000, if the Hover mode is set when the signal is lost, the value from the range 100,200,300,500,1000,2000 is the height to which the drone will rise while waiting for the remote control signal The comma-, at the end of the command

[2024-01-26 08:21:40] harryemery92 : List of Mavic-3 with links nfz patch control commands gps_on, gps_off, satellites on/off cine_sport, cine_normal, switching mode without Cine satellites to Sport speed parameters and back to Normal up1000, up9999, on/off height restrictions tof_on, tof_off, on/off the lower obstacle sensor (be careful when landing) leds_on, leds_off, on/off the LEDs on the drone's beams fcc_on, fcc_off, on/off high transmit power mode bat_land_off, bat_land_on, enable/disable automatic landing when the battery runs low (see order) lost_100-2000, if the Hover mode is set when the signal is lost, the value from the range 100,200,300,500,1000,2000 is the height to which the drone will rise while waiting for the remote control signal The comma-, at the end of the command

[2024-01-26 17:22:58] xquatz : xquatz joined the channel.

[2024-01-27 20:47:40] sambuko : Who do make copy of this firmware , Ukrainians from Russians, or DroneHacke from russians or ukrainians ? And why after few years DH decided to share this firmware. I suppose that DH cooperates with russians and ukrainians developers. I'm sorry if I'm wrong

[2024-01-27 20:57:34] konraditurbe : It's complicated.

[2024-01-27 22:30:13] cs2000 : Agreed, it's complicated and not something that's going to be discussed in any sort of public setting. There's VERY few people who know the actual truth. @sambuko please dont expect any more of an answer than this.

[2024-01-28 04:00:22] johnnokomis : Any reason why other Mavic 3's weren't made public yet? Specifically, the M3T/M3E? We know this firmware already exists in the wild but is still private today. If y'all need a beta tester before release I'm all in.

[2024-01-29 21:00:59] lining-preps.0u : lining-preps.0u joined the channel.

[2024-02-03 05:59:43] maxfunky : I wish the M3 Classic mod is released soon ! will it be possible or the no exploit as been found yet ?

[2024-02-03 06:09:47] maxfunky : looks like the same exploit work for all version of the M3 : [https://twitter.com/faineg/status/1699008244793086109](https://twitter.com/faineg/status/1699008244793086109)

[2024-02-03 06:09:47] maxfunky : looks like the same exploit work for all version of the M3 : [](https://twitter.com/faineg/status/1699008244793086109)

[2024-02-03 08:17:43] s1m0n : I wish you would also deal with this topic, then you would have known the answer for weeks now

[2024-02-03 11:09:52] harryemery92 : https://t.me/RussianHackersChannel

[2024-02-04 19:23:51] johnnokomis : This Russian site claims they sell the 1001 firmware for M3 Classic, Pro, E, T and even the M30T. I contacted them via Tele but they ghosted me after 2 replies. https://3mx-service.ru/proshivka

[2024-02-04 19:59:00] harryemery92 : @johnnokomis because it's free for Russian military only they wont sell to civilians I have tried contacting them myself and havent got any response

[2024-02-04 20:10:48] jcase : It's been posted online a few times

[2024-02-04 20:14:51] harryemery92 : Only for the mavic 3 though not the others

[2024-02-04 21:01:41] jcase : shrug

[2024-02-04 21:03:46] jcase : @johnnokomis you have your 107 correct? May i ask some questions? I'm being told I have to get a 107, despite only flying on a private course for evaluation purposes

[2024-02-04 22:25:43] johnnokomis : Yes I do. It all depends on what your intention is for flying. The location you're flying doesn't matter. Having my 107 doesn't grant me an ability to fly in places that recreational pilots can't. It all depends on what the purpose of your flight is. If it's for fun then you don't need a 107. If there's any money being exchanged for the flight or services being provided from the flight, that's when a 107 is needed.

[2024-02-04 22:36:05] johnnokomis : That's wild. I'm trying to imagine the US military handling critical firmware updates for any equipment via a sketchy guy on Telegram. That can't be an official Russian policy, right?

[2024-02-04 23:08:35] konraditurbe : RF MoD buys mavics, so, kinda? Of course not going thru those sellers, but rather the source of the 1001 FW, the developers who made it.

[2024-02-05 10:52:59] jcase : Yeah, it applies to me. Was just wondering if you had recommendation for the matha part.

[2024-02-06 14:05:59] xpk : xpk joined the channel.

[2024-02-06 14:42:20] dkovar : I got my 107 to fly legally for R&D purposes. I felt it was a business use and thus required a 107. Now I need to consider RID, too. Or getting a waiver to not broadcast RID.

[2024-02-06 16:15:28] jcase : Rie should have had an exception for older drones imo

[2024-02-06 16:15:31] jcase : Rid

[2024-02-06 16:15:37] jcase : Unless it does and I missed it

[2024-02-06 19:34:50] johnnokomis : No there's no exception for RID except drones under 250g. Even then, if you're a 107 holder it doesn't matter the weight of the drone and RID is supposed to be on everything.

[2024-02-06 19:45:41] jcase : There is a rid exception, DOD is exempt. I just saying I think it should have been grandfathered

[2024-02-06 19:58:38] ryantkasher : ryantkasher joined the channel.

[2024-02-06 20:01:11] dkovar : There are public safety exceptions.

[2024-02-06 21:47:31] johnnokomis : I'm part of the public and also care about my safety. So there for consider myself exempt at my own discretion. :wink:

[2024-02-10 04:06:41] avg.bob : avg.bob joined the channel.

[2024-02-12 04:06:25] dart450r : dart450r joined the channel.

[2024-02-13 16:59:30] zevel102 : zevel102 joined the channel.

[2024-02-19 18:01:38] leovinci81 : leovinci81 joined the channel.

[2024-02-20 14:17:22] kk246 : kk246 joined the channel.

[2024-02-22 17:26:59] knorz : knorz joined the channel.

[2024-02-22 18:09:26] otter : otter joined the channel.

[2024-02-24 11:44:35] efwefaf : Does anyone need a DJI T50 that can fly globally

[2024-02-24 11:52:30] fgzdf : fgzdf joined the channel.

[2024-03-02 16:51:13] efwefaf :

[2024-03-03 23:16:00] gizmo : gizmo joined the channel.

[2024-03-04 18:23:24] klarensky : klarensky joined the channel.

[2024-03-05 12:49:14] fenerx03 : fenerx03 joined the channel.

[2024-03-07 18:40:23] lakis1982 : lakis1982 joined the channel.

[2024-03-08 13:40:11] s1m0n : Why is it not possible to increase the top speed with the FCC patch of the Air3? I have been using the DJI Fly app from DroneTweaks, where it is possible to increase the top speed in FCC mode Is FCC not the same as FCC ?

[2024-03-08 13:40:11] s1m0n : Why is it not possible to increase the top speed with the FCC patch of the Air3? I have been using the DJI Fly app from DroneTweaks, where it is possible to increase the top speed in FCC mode

[2024-03-08 18:32:56] quad808 : Increasing top speed has nothing to do with CE or FCC mode. Top speed is controlled by GPS on DJI drones. On the older drones you can change parameters, but on the new drones, a lot of the parameters will reset back to stock upon boot up by DJI design.

[2024-03-08 18:54:59] s1m0n : I'm Not talking over Paramter Setttings. U can Set this Setttings in Expo&Gain Setttings in DJI Fly App. CE Mode is 67kmh, FCC Mode is 75kmh

[2024-03-08 18:56:17] s1m0n :

[2024-03-08 19:03:06] s1m0n : I'm sorry, just as I was about to take a photo, I realized that the settings can be changed after all ?

[2024-03-12 15:53:39] sdfg4711 : sdfg4711 joined the channel.

[2024-03-13 01:43:45] booj4h : booj4h joined the channel.

[2024-03-16 21:22:13] dereksynkopa : Does anyone know if the mini 3 pro has a gentle mode? If so, what setting is it under, 2?

[2024-03-19 05:43:27] pawel : pawel joined the channel.

[2024-03-19 13:40:29] s1m0n : Question about DroneID?, RID, DRI (whatever you want to call it). DJI used to have its own development with DroneID and Aeroscope. According to previous research, this has now been replaced/extended by the DRI standard ASTM F3411-19 (USA) and ASD-STAN (EU). This probably also explains why the DroneID can no longer be changed / deactivated on modern firmwares with the known commands. ASTM F3411-19 and ASD-STAN are compatible with each other, but send different data (e.g. no authentication message package in the EU). The drone decides which of the two standards is sent depending on the localization. And this is exactly my doubt: If I activate the FCC patch and can use all the advantages of FCC (lights control via buttons, up to 75.6kmh), will the EU standard or also the USA DRI standard continue to be transmitted? Because based on the other data structure you could then also determine remotely whether you are driving in CE mode or FCC mode ?!?

[2024-03-19 16:44:21] jcase : @s1m0n it has never been able to be decativated via duml, just censorsed (caveat - from what i have tested and seen )

[2024-03-19 16:44:21] jcase : @s1m0n it has never been able to be decativated via duml, just censorsed

[2024-03-19 16:44:36] jcase : it can still be deactivated the traditional route, via patching the model or fc

[2024-03-19 16:44:55] jcase : or in case of mavic 1 era, a kernel module

[2024-03-19 18:47:33] joonas : also of note - having rid (the standard eu/us solution) active based on location _does not_ disable did (aeroescope packets) - it's additive, not replacing.

[2024-03-20 06:10:55] s1m0n : Exactly censored... that was the word that slipped my mind. But my question was whether aviation security can see from a distance whether you are in FCC mode. You don't just fly illegally... you also often fly legally. I'd be interested to know if you have anything to worry about if you're flying legally but still have FCC activated if you get caught (not uncommon in my area)

[2024-03-20 06:12:27] s1m0n : As far as it is known, it has not yet been possible to detect FCC. However, if the US protocol were to be used in FCC mode, this would be clear evidence that could be provided

[2024-03-20 12:22:19] jcase : i do not believe droneid has any bits indicating FCC mode, however being in hte us, ive never cared to look

[2024-03-20 12:34:32] joonas : afaik yes, when you switch the "wifi region" to us, i.e. go into FCC mode, rid also gets activated. but emphasis on afaik, i never studied it to the last detail.

[2024-03-20 12:35:27] joonas : but if we're talking about the authorities actively looking for such drones, then i think just correlating signal strength against distance from a receiver should also be a dead giveaway.

[2024-03-20 12:37:31] joonas : more likely than not nobodys actually going to be driving around doings this though. there was a recent example of someone getting caught using FCC mode in the UK by first getting busted for some general behavior IRL and then later getting the FCC charge added on top as a result of forensics on the drone.

[2024-03-20 12:38:51] jcase : i did not realize RID wasnt always enabled

[2024-03-20 12:39:08] jcase : @joonas have you looked at teh japanese version of rid

[2024-03-20 12:41:28] joonas : did is, rid is based on your region yeah. EU vs US vs Japan.

[2024-03-20 12:41:52] joonas : not in any real detail. but my understanding is it's just a slightly different packet structure.

[2024-03-20 12:44:08] joonas : also my understanding is certain drones will actually switch rid on/off based on which battery you've got inserted - if it's above or below 250g. this is 2nd hand info though, don't quote me on that.

[2024-03-20 13:29:30] jcase : there is a bit more to it than the packet structure but yeah

[2024-03-20 15:34:48] pingspike : RID gets enabled in the UK if you fly a Mini with the Plus battery, as it takes it over the 249g limit

[2024-03-20 15:34:58] pingspike : but RID isn't a thing in the UK

[2024-03-20 15:35:23] pingspike : pretty sure that's a bug in the firmware, as RID is off at all other times

[2024-03-21 03:53:41] craigscr18 : craigscr18 joined the channel.

[2024-03-21 09:06:08] sparkyws : Not tested the Mini 4 but that's not the case for the Mini 3. RId is geo locked so shouldn't be enabled in the UK

[2024-03-21 09:36:35] pingspike : yeah that was my point :)

[2024-03-21 12:31:53] tissy : That's really interesting. I need to test this.

[2024-03-21 12:31:53] tissy : That's really interesting. I need to test this. Have you seen the Drone Hone plugin?

[2024-03-21 15:43:18] pingspike : check it out Steve, I might have misunderstood as I only skim-watched the videos, but two from a couple of months ago: https://www.youtube.com/watch?v=sxoODkaFuk4 and https://www.youtube.com/watch?v=6_DVld8TZCk

[2024-03-21 15:43:51] pingspike : @tissy :point_up_light_skin_tone:

[2024-03-22 02:21:27] johnnokomis : I have raised this point several times and nobody has given an answer. When a plus sized battery is used, RID is enabled which also requires registering the drone with the FAA. RID is mandatory for any drone that has been registered, regardless of weight. So even when you go back down to 249g RID is technically still required. RID is a total mess that benefits nobody.

[2024-03-22 13:04:44] fr3style : fr3style joined the channel.

[2024-03-24 22:30:46] deadman96385 : deadman96385 joined the channel.

[2024-03-28 09:14:19] infinitydrones :

[2024-03-28 09:14:35] infinitydrones : anyone know why my air 2s does not want to downgrade :(

[2024-03-28 09:15:05] infinitydrones : Tried different usb ports and cables... also different machines. All give the same error...

[2024-03-28 19:49:01] quad808 : what version of DH?

[2024-03-28 19:50:59] quad808 : try the older version, works better on some PC's: https://drone-hacks.com/software/download/desktopOlder

[2024-03-29 22:42:13] infinitydrones : Thank you. Support told me to use 1.35 which solved the problem. I might put a PSA out on my channel to inform people till a fix is found. I've seen a surge in Air 2S purchases/hacks recently with the prices dropping so nicely.

[2024-04-01 14:51:27] zuchmir : zuchmir joined the channel.

[2024-04-03 00:27:21] dronepilot : Does the mavic 3 downgrade firmware from the lates to the recommend without a license?

[2024-04-03 01:42:00] dreamtree : dreamtree joined the channel.

[2024-04-03 19:50:39] quad808 : Only if the ARB is the same #.

[2024-04-04 19:54:48] dronepilot : It's not the same unfortunately. Any non way to downgrade the mavic 3?

[2024-04-04 23:07:21] amat : amat joined the channel.

[2024-04-05 15:53:27] monkeyman : any body know that avata can be unlock?

[2024-04-05 15:54:21] monkeyman : I got a video proved that avata has been unlocked recently, likely using different firmware between drone and googles

[2024-04-05 16:26:28] jcase : yes, but unlocked in what regard?

[2024-04-05 16:26:33] jcase : there are a lot of things that can be unlocked

[2024-04-06 11:43:45] monkeyman : something todo with the hardware, check this out https://flylusive.com/

[2024-04-06 11:57:05] jcase : unlock could refer to many things ...

[2024-04-06 21:43:04] jatter : jatter joined the channel.

[2024-04-11 13:03:13] halowarrior8 : halowarrior8 joined the channel.

[2024-04-12 20:53:17] infinitydrones : Any test the Mavic 3 mod recently. I've been hearing a number of guys saying that Remote ID is not removed on 1100, but on 1000 firmware it is

[2024-04-13 05:39:08] fr3style : Can the devs please implement a support for the dji high bright monitor? I need to force flash mine! It has some weird beta FW and wont let me update. It fails at 98%

[2024-04-13 08:31:39] joonas : generally speaking DH just mirrors the official DJI update method, so it's not very likely to do much better than assistant.

[2024-04-13 17:56:52] the_mini2_guy : the_mini2_guy joined the channel.

[2024-04-16 07:09:05] infinitydrones : I've been asked a number of times now if Dronehacks will be making a similar mod like the DroneTweaks mod available to enable FCC mode on the Avata 2 and similar drones

[2024-04-17 09:17:00] caseygibson : is there some params available in dronehacks to tune DJI avata 1 RF power levels?

[2024-04-17 09:20:36] caseygibson : I know about the FCC hack using the ham_cfg_support but I'd like to use as much power as possible ...

[2024-04-17 09:21:15] caseygibson : something like echo “pwr_2” > naco_pwr.txt for Air Units

[2024-04-17 10:13:00] joonas : nope, o3/avata 1 only has ham_cfg_support

[2024-04-17 10:13:00] joonas : nope, o3 only has ham_cfg_support

[2024-04-17 15:58:28] caseygibson : thX!

[2024-04-17 21:02:10] fr3style : Any here want to do a paid commision hack? Its on inspire2 and inspire3 i need a way to tell the video transmitter to think the drone is armed and send in full power! Willing to pay for this! Also if any one can make so that sportmode on inspire3 can do manual mode instead we are looking for this too

[2024-04-17 21:02:33] fr3style : Any one with a good pinout schematic for the inspire2 im also looking for this!

[2024-04-19 06:41:19] mgroberman : It can it's like any drone can be :)

[2024-04-23 14:34:37] monkeyman : dh 1.40 can modify avata 2 parameter?

[2024-04-23 14:35:09] monkeyman : @jcase

[2024-04-23 14:35:23] jcase : no idea

[2024-04-23 14:35:29] jcase : im not associated with the tool

[2024-04-23 14:41:36] monkeyman : sorry :D

[2024-04-23 14:42:10] monkeyman : ah ic maybe @quad808

[2024-04-23 14:42:12] monkeyman : :(

[2024-04-23 14:42:38] monkeyman : :)

[2024-04-23 14:43:44] monkeyman : wanna try to increase the speed :)

[2024-04-23 14:44:31] monkeyman : https://youtu.be/yFyEmYh0VyM?si=8uCMwdd6hTIwot7j

[2024-04-24 18:45:51] jacjes : jacjes joined the channel.

[2024-04-25 10:24:15] poopnondji : Confirmed. Dh1.40 supports fw flashing, and params editing on Avata 2.

[2024-04-25 14:15:47] efwefaf : What Duml command can be sent to E1E to obtain his current country code

[2024-04-25 23:55:11] tylerwantsauav : tylerwantsauav joined the channel.

[2024-04-26 14:43:03] ar2rgo : ar2rgo joined the channel.

[2024-04-26 20:46:36] rsrmdp : No pasa 0%

[2024-04-26 20:46:42] rsrmdp : No pass

[2024-04-26 20:57:46] rsrmdp : 0%

[2024-04-28 13:15:41] shinoby : PM me

[2024-05-02 07:37:24] s1m0n : Guys, I have an Air3 with deactivated DroneID. Latest firmware and latest DJI Fly version. The problem is that RID is still being sent. That means any idiot can locate me with a smartphone and doesn't need an Aeroscope. Is there a way to turn off RID as well or to fake/spoof the values?

[2024-05-02 08:43:56] konraditurbe : CIAJD stopped working sometime after russia's invasion of Ukraine, so the Air 3 launched with the new droneID code that doesn't respond to the privacy bits being set or not.

[2024-05-02 09:10:39] s1m0n : No, i'm talking about the RID (Open Remot ID)..Not DroneID (Aeroscope). CIAJD was only to Check and confirm, thats DroneID is disabled. But RID is still sendig (around 100-500, Theoretically up to 1500m under optimal conditions). RID / Remote ID = DRI-Standards ASD-STAN prEN 4709-002 (EU) and ASTM F3411-19 (USA). Drones under 250g dont have it

[2024-05-02 09:24:53] konraditurbe : both RID and DID are being sent. You didn't "deactivate" DroneID, even if CIAJD tells you otherwise. Same will apply to RID.

[2024-05-02 09:49:16] s1m0n : Are u saying the pay service didnt to his Job right? Its more Like Fake the showing state?

[2024-05-02 09:49:45] konraditurbe : which "pay service"?

[2024-05-02 09:51:49] konraditurbe : CIAJD is free, you don't have to pay for it. And CIAJD is useless against any drone that's flying these days, unless you downgrade the firmware to a version released before Feb 2022 (on the Air3 you can't). I did just that on my MA2 and Air2S, keep them on vulnerable FWs that were tested by people with access to aeroscope devices.

[2024-05-02 09:56:28] s1m0n : I don't know if it is desirable to talk about it openly, but it was not remotly. U cant use CIAJD on Air3.. it was possible, but the DJI Fly Version, activate it again, on every Takeoff. With latest Air3 FW (01.01.1000) U can read the State with CIAJD, but If U try to send the command, IT gives u an Error. So yes, somenting was changing, and its keep showing 0000000 after flying. I cant Check If is something sending or not, but for me its makes no sense, if its disabled, but still sendig DRI, which can every Guy locate with a Smartphone

[2024-05-02 09:59:27] konraditurbe : Don't bother, on the Air 3 it's almost certainly patched at various points in the firmware. Unless you somehow got access to a Ukrainian/russian modified firmware (like the 1001 for M3s), it is unlikely your Air3 will stop sending RID and DID.

[2024-05-02 10:11:10] s1m0n : So what do I do with this drone now ?? One guy says it's deactivated,the other Guy says it not (but He didnt say its impossible)

[2024-05-02 10:11:10] s1m0n : So what do I do with this drone now ?? One guy says it's deactivated,the other says it's not possible

[2024-05-02 10:13:23] s1m0n : Pay for the next service to have it valied? But that wouldn't solve my problem with the RID either

[2024-05-02 10:14:44] konraditurbe : Which guys?

[2024-05-02 10:15:14] konraditurbe : Who are you paying? Are they from this community? How trustworthy are these "guys"?

[2024-05-02 11:58:38] s1m0n : yes, they are also represented here. maybe they will speak up

[2024-05-02 19:29:55] pingspike : or maybe you need to @mention them by name

[2024-05-03 00:37:49] jcase : @s1m0n i almost guarantee you that your droneid isnt deactivated

[2024-05-03 00:38:24] jcase : at least on an air3

[2024-05-03 07:13:32] s1m0n : yes I could, but the service does not want to communicate about it publicly. I can only say that I am very suspicious myself, but it is an established member (group)

[2024-05-03 10:49:58] pingspike : yeah, ok mate

[2024-05-03 14:33:31] jcase : that is because they hustled you

[2024-05-03 14:34:56] jcase : @s1m0n any legit service like that wouldnt mind, and they would disable remoteid.

[2024-05-03 17:08:32] s1m0n : Well... I'm sure that some people here also know tricks that they don't necessarily want to become public knowledge. Would you agree with me on that point or do you think it's impossible?

[2024-05-03 20:23:26] jcase : yeah i am one of those people.

[2024-05-03 20:23:26] jcase : yeah i one of those people.

[2024-05-03 20:24:01] jcase : whats more likely, someone risked exposing $30k+ in exploits to patch your flight controller (or modem depending model)

[2024-05-03 20:24:01] jcase : whats more likely, someone risked exposing $30k+ in exploits to disable droneID for you

[2024-05-03 20:24:09] jcase : for a few bucks

[2024-05-03 20:24:11] jcase : or

[2024-05-03 20:24:16] jcase : you got hustled.

[2024-05-03 22:15:35] s1m0n : Can i dm u? And should I delete my posts about it? @jcase

[2024-05-03 22:35:16] jcase : you can and hell i dont care waht you do about your posts

[2024-05-03 22:35:16] jcase : you cant and hell i dont care waht you do about your posts

[2024-05-03 22:36:36] jcase : im not hte dm police

[2024-05-03 22:36:37] jcase : lol

[2024-05-07 18:21:38] fgzdf : Who can brush the aerial camera firmware for the rcplus remote control

[2024-05-08 00:45:04] punishman : punishman joined the channel.

[2024-05-08 02:58:59] young : young joined the channel.

[2024-05-09 13:53:48] andris8888 : andris8888 joined the channel.

[2024-05-09 13:54:07] andris8888 : Anyone else unable to flash any mini 3 fw?

[2024-05-09 13:54:27] andris8888 : I am trying to flash several mini 3 but all of them fails or hangs

[2024-05-09 13:54:41] andris8888 : Tried with different usb cables, different PCs

[2024-05-09 13:54:50] andris8888 : Any other drone flashing works well

[2024-05-09 13:58:05] andris8888 : Now I am trying with 1.35

[2024-05-09 14:17:51] andris8888 : Still doesnt start flashing just says starting flashing firmware process

[2024-05-09 14:18:00] andris8888 : And happens nothing

[2024-05-09 14:46:39] shinoby : I can do it

[2024-05-09 14:47:06] shinoby : I can do it for you

[2024-05-09 17:56:36] andris8888 : If you write me how to flash it I can try

[2024-05-09 18:40:42] shinoby : This is not a solution using the DH program, it's another software

[2024-05-09 18:55:37] konraditurbe : Just bought a Mavic 3 (wm260), brand new in box, any way to downgrade to .0600 from 1300? Or the only possibility is 1000/1001 custom FW (https://drone-hacks.com/m3-custom-fc)?

[2024-05-09 20:11:10] andris8888 : Okay, then show us how you can do it. We are all ears :)

[2024-05-09 21:45:39] konraditurbe : Yikes, 1300 has ARB=5, and the prehacked 1100 has a lower one. Do I have to purchase a license for the downgrade to go thru?

[2024-05-09 22:13:42] konraditurbe : License purchased, drone flashed.

[2024-05-10 16:49:08] poopnondji : Waiting on a Professional license to become available for Avata 2. Been trying Mavic 3 stuff on it now I'm exhausted ?

[2024-05-10 18:06:10] sifo : sifo joined the channel.

[2024-05-10 20:14:36] indimind : indimind joined the channel.

[2024-05-13 04:58:57] efwefaf : Where can I download DJI Pilot2 for M3E

[2024-05-14 06:33:01] flylusive_pat : Mini 3 flashing will be added in the upcoming releases.

[2024-05-14 13:28:48] andris8888 : Wow, hooray! Can you explain what is the issue with the Mini 3 firmware flashing process? Do you have any beta version to test?

[2024-05-14 14:11:51] symza : symza joined the channel.

[2024-05-14 14:26:05] drlov : Is Mavic 3 NFZ modified firmware reliable? No risks?

[2024-05-14 14:47:40] flylusive_pat : There are no "beta versions" to test yet.

[2024-05-14 14:48:36] flylusive_pat : There will be however an option later to "switch" from stable to beta release channel.

[2024-05-14 16:40:43] shenanigans : shenanigans joined the channel.

[2024-05-19 11:45:42] efwefaf : Does anyone know how to change the img file and recalculate the CRC verification

[2024-05-20 08:10:31] fruits_biology : fruits_biology joined the channel.

[2024-05-20 08:18:12] fruits_biology : Unfortunately I’m noticing there is very little on M30, (which is also M300) should I assume everything is the same as the Magic 3?

[2024-05-20 08:18:46] fruits_biology : Mavic 3*

[2024-05-21 05:59:20] drlov : My Mavic 3 corrupted the firmware during the process of installing the FC hacked for NFZ and turning off the LEDs, is there anything that can be done? The drone disconnected in the middle of the process and didn't connect anymore...

[2024-05-21 06:04:04] drlov : It still connects to the radio, starts the engines, but without image and the gimbal without stabilization. On the computer it doesn't recognize it, it keeps connecting and disconnecting... Any way to force update via DJI FLY?

[2024-05-21 07:00:48] wag-on : wag-on joined the channel.

[2024-05-21 07:55:38] cs2000 : You're best to log a ticket with DH support via the website @drlov

[2024-05-21 17:03:44] snackashack : snackashack joined the channel.

[2024-05-22 02:28:05] caracara : caracara joined the channel.

[2024-05-22 13:26:51] andris8888 : @cs2000 Any news on mini 3 fw flashing issue?

[2024-05-22 13:32:13] caracara : @flylusive_pat @cs2000 @andris8888 im also very interested in getting mini 3 flashed, if i can help in any way i will be glad to

[2024-05-22 16:07:38] caracara : Anyone know if droneId gets disabled with drone.hacks license on Mini 2 ?

[2024-05-22 16:35:55] baxove : No, it doesn't. But CIAJeepDoors seems to still be working on the Mini 2, at least on the older firmware versions. It doesn't disable DroneID, but it sends out fake data

[2024-05-22 17:32:23] caracara : @derowey i see, its too bad there isnt a directory of known working fw for ciaJeepDoors

[2024-05-22 17:32:23] caracara : @derowey i see, its too bad there isnt a directory pf known working fw for ciaJeepDoors

[2024-05-22 17:42:59] konraditurbe : Mavic Mini 2: Gen 1 fw 01.03.0000 Gen 2 fw 01.03.0009 Basically what's on: https://drone-hacks.com/birdmap

[2024-05-22 17:47:20] caracara : @konraditurbe Is 01.07.0200 supported by JeepDoors ? That is latest and is listed on drone-hacks

[2024-05-22 17:47:36] konraditurbe : nope

[2024-05-22 17:48:41] caracara : I see

[2024-05-22 17:50:59] caracara : Found a used mini 2 selling for 180usd, thought of grabbing it but seller has updated it to latest fw already

[2024-05-22 17:54:02] caracara : Wait isnt it possible to rollback fw on mini 2 ?

[2024-05-22 17:55:25] baxove : How can you see that on the birdmap? I can't see anything there about CIAJeepDoors. I'm on 01.03.0500 (gen 2) and it doesn't re-enable the flags when I begin a flight

[2024-05-22 18:02:53] caracara : @derowey do you know if rollback is possible on these ?

[2024-05-22 18:10:30] konraditurbe : Info I got is not from the bird map, but matches what's on there.

[2024-05-22 18:11:10] baxove : I'm not the right person to ask, but I don't think there is a way to downgrade to a fw version with a lower anti-rollback value, and it seems 01.07.0200 are on the anti-rollback 4

[2024-05-22 18:17:08] baxove : What is matching on the birdmap? I am asking because I want to know if I need to downgrade from 01.03.0500 to 01.03.0009. 01.03.0500 is still on the anti-rollback 1 and it seems like a minor update from 01.03.0009

[2024-05-23 08:29:33] cs2000 : Downgrades to lower ARB versions are supported using DH, but only if the page says "downgrade may be possible" in the yellow box. DH does not support anything to do with CIAJEEPDOORS, it was just a project that bin4ry had some involvement in, its use in terms of supported drones and reliability was very limited, so it was never made part of DH.

[2024-05-23 08:30:09] cs2000 : No news on mini 3 flashing issues yet. I cant say much, but just bear with us.

[2024-05-23 09:21:00] andris8888 : Thanks for the info. Fingers crossed! :)

[2024-05-23 09:57:22] babublazin : babublazin joined the channel.

[2024-05-23 14:09:30] fruits_biology : Is it possible to stop broadcasting the remote ID on the M30T (pm320)

[2024-05-24 20:03:10] fruits_biology : When will drone-hacks support M30 series?

[2024-05-25 07:13:40] baxove : The firmware version 01.03.0009 for the Mini 2 has a warning label: 'DO NOT DOWNGRADE TO THIS IF YOUR DRONE IS ON A GREATER FIRMWARE VERSION.' Could anyone please let me know if it is possible to downgrade to 01.02.0300 first and then upgrade to 01.03.0009 afterwards? I am currently on 01.03.0500 (ARB 1).

[2024-05-25 18:17:03] poweredbyatp : poweredbyatp joined the channel.

[2024-05-27 08:58:35] infinitydrones : Any reason you want to downgrade?

[2024-05-27 14:26:02] baxove : According to @konraditurbe's info, the latest firmware that supports CIAJeepDoors is 01.03.0009 for Gen 2. I'm on 01.03.0500, and I'm not sure if it's broadcasting the correct data with this version, but it doesn't hurt to downgrade if possible.

[2024-05-28 21:36:07] infinitydrones : You should be able to downgrade if you have a dronehacks license linked to your drone.

[2024-05-29 05:34:36] baxove : Yes, I have a dronehacks license linked to it. What about the warning label on firmware version 01.03.0009, 'DO NOT DOWNGRADE TO THIS IF YOUR DRONE IS ON A GREATER FIRMWARE VERSION'? Unfortunately, there is no more information on the birdmap about this. The firmwares before that don't have that warning label, so my first thought was, what happens if I downgrade to 01.02.0300 first and then upgrade to 01.03.0009? All the versions are on ARB 1 if that matters.

[2024-05-29 17:55:59] flymymavic : Can anyone assist, I have a licence for the MIni 4 pro and its connected and bound but im not seeing the FCC option in Hacks, I cant find any info on the help pages,

[2024-05-29 19:25:59] swaggyc : swaggyc joined the channel.

[2024-05-29 19:26:49] swaggyc : Any instructions on connecting a mini 4 pro via usb and maintain root access via adb with dronehackz?

[2024-05-30 07:01:56] flylusive_pat : Root access on Mini 4 Pro is not possible.

[2024-05-31 10:22:14] sparkyws : Check the Birdmap

[2024-05-31 10:23:32] sparkyws : Check the Birdmap

[2024-06-02 23:01:53] nmikus : +'

[2024-06-03 02:02:52] tmantheman : tmantheman joined the channel.

[2024-06-03 02:05:25] tmantheman : Hello everyone. I'm trying to find out if anyone has used the TRB battery problem that drone hacks offer. I'm looking to use it with a mini 2 battery and I'm wanting to know if it'll work with the mini 2 battery and what license to buy.

[2024-06-03 07:35:07] mymail : mymail joined the channel.

[2024-06-03 07:40:48] andris8888 : just use a cp2112 adapter with battery killer app if you want to reprogram dji mini 2 battery. No need for TRB

[2024-06-03 09:48:59] flylusive_pat : We have discontinued TRB. TRB will be replaced by a new software.

[2024-06-03 14:49:16] devinnorgarb : devinnorgarb joined the channel.

[2024-06-05 20:14:06] infinitydrones : Anyone have issues where the "hacking tab" just stays at loading exploits for ever...?

[2024-06-07 23:01:30] quad808 : Whenever you get that loading message and it won't resolve, that means your connection to our servers to dish out the exploits isn't working properly. This could mean the server is busy, internet connection is overloaded, or it could mean your internet connection to our servers isn't getting there for some reason. Or something.

[2024-06-07 23:01:30] quad808 : Whenever you get that loading message and it won't resolve, that means your connection to our servers to dish out the exploits isn't working properly. This could mean the server is busy, internet connection is overloaded, or it could mean your internet connection to our servers isn't getting there for some reason.

[2024-06-10 09:43:53] cs2000 : cs2000 updated the channel header from: DroneHacks homepage: Down | Support: Down | Latest Desktop Version: 1.40 to: DroneHacks homepage: Up| Support: Down | Latest Desktop Version: 1.40

[2024-06-10 10:22:14] flylusive_pat : flylusive_pat updated the channel header from: DroneHacks homepage: Up| Support: Down | Latest Desktop Version: 1.40 to: DroneHacks homepage: Up| Support: Down | Latest Desktop Version: 1.41

[2024-06-10 11:40:06] konraditurbe : uhh, whats up with drone-hacks? did it change owner?

[2024-06-10 12:30:24] cs2000 : cs2000 updated the channel header from: DroneHacks homepage: Up| Support: Down | Latest Desktop Version: 1.41 to: DroneHacks homepage: Up| Support: Up| Latest Desktop Version: 1.41

[2024-06-10 14:57:06] baxove : I wonder the same thing. Was the website published by mistake? Many buttons do not work, and I see new things being added, as if someone is working on it right now.

[2024-06-10 15:48:05] harryemery92 : My guess is drone-hacks has sold by bin4ry been taken over by flylusive

[2024-06-10 15:52:15] harryemery92 :

[2024-06-10 16:34:57] flylusive_pat : Hey everyone, So, big news – Drone-Hacks got acquired by FlyLusive! Sorry for the downtime today; CloudFlare didn’t update our records in time (and the changes are still not visible in some countries). About the website: we're still giving it a facelift, **purchasing new licenses and hacking drones is working just fine.** There are a few bugs like missing or broken URLs, but we should squash those by the end of the week. Oh, and guess what? Soon, Drone-Hacks will support some of the newer models! ? If you spot any bugs or issues, feel free to chat here with me or cs2000, or raise a ticket, and we’ll sort it out.

[2024-06-10 16:54:23] royeiror : Are you referring to the Mini 3 Pro?

[2024-06-10 17:15:12] cs2000 : Hey guys. So yeah, massive changes needed today from both old and new owners to get this working. Most of it happened smoothly but of course there was some problems, we got there in the end though. Pat is working hard to get all the little things sorted like the odd dead link or whatever, so bear with him :) On support, you still have myself and @quad808, so familiar faces there. As usual, we're both here in Mattermost too. I know change is scary, especially without warning, but rest assured that with this change there will absolutely be a massive focus on the app, bug fixes, new features and new models of course. Expect a blog post announcement within the next 24 hours. @bin4ry has been a great person to work with for all these years, but like everything, there comes a time you need to move on. For whatever his personal reasons are, he chose well in picking Pat and I'm excited to see what is coming. P.s. Make sure you register for a new account on the new website, you can then pull over all your old licenses to the new system. There is no super duper rush to do this since you have until December 2025, but you will need to this at some stage !

[2024-06-10 17:19:52] flylusive_pat : Sorry, I cannot tell you which models we are preparing the new DH app for. We will announce it when the right time comes.

[2024-06-10 17:21:37] flylusive_pat : Sorry, I cannot tell you which models we are preparing the new DH app for. We will announce it when the right time comes.

[2024-06-10 17:58:05] baxove : Thanks for the info. I see that there is a new version of DH on the website, version 1.41. Could you tell me if there are any changes besides the ownership change? When running the program through VirusTotal, it shows more malicious findings than usual. These are probably false positives, I guess, but that's why I am asking.

[2024-06-10 18:04:54] andris8888 : Mini 3 flashing would be good to hear

[2024-06-10 18:05:20] andris8888 : Now it is impossible to flash Mini 3 (not Pro)

[2024-06-10 21:38:51] santosg : santosg joined the channel.

[2024-06-10 22:01:13] flyingkite : What can one do if I don't remember the password to have the licenses pulled to the new site?

[2024-06-10 23:46:10] quad808 : Are you logging into the new site with the old DH account and password? When you do the migration, you need to login with your original DH account and password, since the data is located on the original DH server. I can't help more than that.

[2024-06-10 23:47:55] quad808 : If you created a new account on the new DH server now with a different password and or username, they must match the old data. So check your profile, and make them the same as the original DH account that you want data to migrate from.

[2024-06-11 08:11:21] cs2000 : @flylusive_pat Any ideas about @flyingkite's message?

[2024-06-11 08:11:21] cs2000 : @flylusive_pat

[2024-06-11 15:01:24] flylusive_pat : @flyingkite ThinkAwesome is currently looking into options how to reset password. (As we do not have the original user data)

[2024-06-11 15:43:51] flylusive_pat : Hey guys, we had an issue with our e-mail server not sending verification emails. We have set for now everyone's email as verified and everyone can login. Sorry for the issue.

[2024-06-11 20:43:37] quad808 : Thank you everyone for the continued patience on the new move.....we are working hard squashing the bugs.....

[2024-06-11 20:43:37] quad808 : Thank you everyone for the continues patience on the new move.....we are working hard squashing the bugs.....

[2024-06-12 06:45:07] infinitydrones : Hi everyone. So what is the process to log in to the new Drone-Hacks website?

[2024-06-12 06:46:32] infinitydrones : My saved login details are not working. So I'm login in with my details I've always used.

[2024-06-12 09:18:15] flylusive_pat : Hey @infinitydrones , please, take a look here. You need to re-register https://drone-hacks.com with the same e-mail as on the old website if you want to transfer licenses. If not, you can just register new account.

[2024-06-12 09:29:40] infinitydrones : Thank you

[2024-06-12 20:50:11] flyingkite : Thank you. I finally was able to get in and do the license transfer.

[2024-06-12 20:52:54] flyingkite : I created the new account with the same email but different password. Then I was prompted to enter the email/password to get the info transferred. I couldn't remember the password but eventually was able to remember and get it all done. I'm good now. Thanks.

[2024-06-12 20:53:48] harryemery92 : My mavic 3 after license transferd from my old account I tested the drone hacks 1.42.exe and logged in but saying I don't have a licence when I have already bought one

[2024-06-13 07:38:36] flylusive_pat : @harryemery92 Due to DH version below 1.41 not being able to read Serial Number longer then 14 characters, we created a migration, try to re-run the app with you logged-in (close and re-open the app). It should automatically update it on the server. If it does not, please, contact our support.

[2024-06-13 17:45:38] harryemery92 : @flylusive_pat have tried that still says no licence available

[2024-06-13 18:57:20] quad808 : @harryemery92 open a support ticket

[2024-06-14 02:20:37] areoc : I have migrated my licenses, but it seems to be unsuccessful. My device is not under my account.

[2024-06-14 02:22:52] areoc :

[2024-06-14 05:04:01] flylusive_pat : Please contact support@drone-hacks.com.

[2024-06-14 07:36:31] harryemery92 : Exactly same problem I'm having

[2024-06-14 09:00:53] flylusive_pat : It's help if you would send me your email address to DM's.

[2024-06-14 09:00:53] flylusive_pat : It'd help if you would send me your email address to DM's.

[2024-06-14 09:03:54] flylusive_pat : If it did not transfer, there is issue on a ThinkAwesome side. I can only check by having your e-mail.

[2024-06-14 09:40:30] cs2000 : cs2000 updated the channel header from: DroneHacks homepage: Up| Support: Up| Latest Desktop Version: 1.41 to: DroneHacks homepage: Up| Support: Up| Latest Desktop Version: 1.43

[2024-06-14 09:54:47] cs2000 : For anyone with the serial number detection bug, and well, anyone really, try the new 1.43 release please https://cloud.flylusive.com/drone-hacks/drone-hacks/dh_v1.43.exe

[2024-06-14 11:34:23] harryemery92 : Mine registered now with 1.43 thanks

[2024-06-14 15:12:50] cs2000 : cs2000 updated the channel header from: DroneHacks homepage: Up| Support: Up| Latest Desktop Version: 1.43 to: DroneHacks homepage: Up| Support: DOWN| Latest Desktop Version: 1.43

[2024-06-14 20:24:55] flylusive_pat : Nice, please let me know in case you have any questions or problems. Your feedback is very important to us.

[2024-06-15 14:35:01] flylusive_pat : We have just released DH Companion 1.0.22, now it should work on all existing drones. There are known issues such as logout not working - you need to close the app from drawer and open again, or when drone is connected after the app is open, it'll crash. Those we will be addressed in the next release. In case anyone is having problems with the app, please, let us know on support@drone-hacks.com

[2024-06-17 22:11:02] flyingkite : v1.43 app is not detecting any of my drones. I tried the mini2 and air2s. I checked using the DJI assistant and it is detecting the drones. I'm also getting a popup window with an error that says "An unknown error occurred, please restart the software!" I tried loading the program and then connecting the drone and the reverse. Same error. Not sure what else to check.

[2024-06-18 12:54:27] cs2000 : @flyingkite Any chance you can grab a log file? Go into C:\Users\Your Username\.dronehacks Delete the log files in here and try to connect the drone again, it will generate a new log file. Message me this directly and il pass it on. BTW, these things are best handled via support (https://support.drone-hacks.com/)

[2024-06-18 14:26:39] swaggyc : I am having a similar issue, how did you go about resolving this?

[2024-06-18 16:27:26] tmbinc : I had the same issue, turned out it was because my internet was slow together with a bug in D-H. Please try the following: 1. Disconnect drone 2. Start DH 3. Wait for "Map successfully received" to appear 4. Connect drone

[2024-06-18 22:05:38] flyingkite : I opened a ticket and provided the log file. Thanks.

[2024-06-19 22:43:28] drlov : Any problems processing payments on DH? I've been trying since early on, it's just failure

[2024-06-20 04:17:11] drlov : Is it possible to activate the landing protector again on the mavic 3 FC custom?

[2024-06-20 06:42:34] harryemery92 : It would also be nice to get ride of the gps off option under cini mode and have cini mode back also remove force 5.8 when fcc_on,

[2024-06-21 09:24:54] cdmzero : cdmzero joined the channel.

[2024-06-21 09:32:00] cdmzero : Hello there, any chance to get max-altitude removal in DJI mini pro 4?

[2024-06-22 22:41:27] qr25 : qr25 joined the channel.

[2024-06-23 02:12:18] junie : junie joined the channel.

[2024-06-23 04:07:14] nigmea : nigmea joined the channel.

[2024-06-23 05:45:03] realkrisi : realkrisi joined the channel.

[2024-06-24 15:19:11] cs2000 : cs2000 updated the channel header from: **Drone-Hacks Homepage:** Up | **Support:** Up | **Latest Desktop Version:** 1.43 | **DH Companion Version:** 1.0.23 to: **Drone-Hacks Homepage:** Up | **Support:** Up | **Latest Desktop Version:** 1.45 | **DH Companion Version:** 1.0.23

[2024-06-24 17:19:54] flylusive_pat : Hey, Mini 4 Pro **is not** on our roadmap for anytime soon.

[2024-06-24 17:20:28] flylusive_pat : We have solved the issue with birdmap.

[2024-06-25 07:06:28] deejayeye : deejayeye joined the channel.

[2024-06-25 07:38:49] pingspike : @flylusive_pat can we add the Mavic 3 Enterprise (3E/3T) to the roadmap for FCC mods please mate :grin:

[2024-06-25 14:12:38] flylusive_pat : Yes, it's on the roadmap already ;)

[2024-06-26 09:09:29] micronica : i see still no solution for cali firmware on mini 3(non pro)

[2024-06-26 11:20:16] flylusive_pat : We are currently not working to change that, as it'll be changed with major update.

[2024-06-26 13:40:55] kowoos : kowoos joined the channel.

[2024-06-26 18:19:36] giles : giles joined the channel.

[2024-06-26 23:35:07] johnibhramin : johnibhramin joined the channel.

[2024-06-26 23:36:07] johnibhramin : anyone who can calibrate vision sensors mini 4 pro? i can pay

[2024-06-27 06:24:31] flylusive_pat : We can calibrate in Slovakia, Europe.

[2024-06-27 06:25:27] flylusive_pat : There is no remote process.

[2024-06-27 11:43:06] cs2000 : cs2000 updated the channel header from: **Drone-Hacks Homepage:** Up | **Support:** Up | **Latest Desktop Version:** 1.45 | **DH Companion Version:** 1.0.23 to: **Drone-Hacks Homepage:** Up | **Support:** Up | **Latest Desktop Version:** 1.45 | **DH Companion Version:** 1.0.24

[2024-06-28 06:22:06] infinitydrones : Would also like to know how to do it. Currently we have to send our drones to DJI China to get calibrated :( - Air 3, Mini 4 pro and Mavic 3 series :(

[2024-06-28 09:43:35] flylusive_pat : We are just DJI partner and can do it.

[2024-06-28 09:43:46] flylusive_pat : That's all I can tell you. There is no "hack" available.

[2024-06-28 09:43:46] flylusive_pat : That's all I can tell you. There is no "hack" avialable.

[2024-07-01 10:59:55] wildwildo : wildwildo joined the channel.

[2024-07-01 17:29:24] mrsmith : mrsmith joined the channel.

[2024-07-01 22:47:35] blandreth94 : blandreth94 joined the channel.

[2024-07-02 16:16:35] fr3style : Is there la s for mavic 3 pro signal hack?

[2024-07-02 16:16:45] fr3style : *plans

[2024-07-03 11:14:54] infinitydrones : DH Companion or RC Pro

[2024-07-03 18:38:54] phantom4pro.v2.0 : phantom4pro.v2.0 joined the channel.

[2024-07-06 14:01:36] chengcheng : Hello, rcplus flashing firmware support air2S, have you solved it, I think I can help you

[2024-07-06 14:13:13] chengcheng : The firmware of mini3 and air3 and mini4pro cannot be flashed, there are 40021 and 40011 and 10016 and 10017 errors after replacing the gimbal or lens core, how to eliminate this, if you don't know, we can discuss and solve it, I can help you.

[2024-07-06 14:15:49] chengcheng : The firmware of mini3 and air3 and mini4pro cannot be flashed, and there are 40021 and 40011 and 10016 and 10017 errors after replacing the gimbal or lens core, how should this be eliminated, do you have any friends who know, I want to ask for advice.

[2024-07-10 10:29:48] fr3style : Somi bought the RM700 remote with pre installed RC PRO firmware. Its not fcc hacked and wanna get this done to the remote! The fw is Build Number 03.02.07.00

[2024-07-10 10:30:06] fr3style :

[2024-07-10 10:32:04] fr3style :

[2024-07-10 10:32:12] fr3style : Video of the remote

[2024-07-12 01:41:23] csnyder154 : csnyder154 joined the channel.

[2024-07-12 08:36:29] cs2000 : cs2000 updated the channel header from: **Drone-Hacks Homepage:** Up | **Support:** Up | **Latest Desktop Version:** 1.45 | **DH Companion Version:** 1.0.24 to: **Drone-Hacks Homepage:** Up | **Support:** Up | **Latest Desktop Version:** 1.45 | **DH Companion Version:** 1.0.26

[2024-07-12 12:05:53] harryemery92 : It can be fcc hacked using the Chinese dji fcc server but the first time install will brick the controller after and you will need to reflash the modded rc pro firmware I found this out the hard way I also own the rc plus with the rc pro firmware

[2024-07-12 15:06:04] jcase : Ugh such an ugly way to do it

[2024-07-12 15:06:42] jcase : If I can get a free day I'll make an apk that will do it without modding or any server

[2024-07-13 08:08:04] fr3style : Jcase i will gladly pay for this

[2024-07-13 08:08:42] fr3style : How can one re flash the modded rc pro? How do they even make this work?

[2024-07-13 08:08:59] fr3style : I would love to be able to flash it to inspire3 and back

[2024-07-13 15:16:29] johnnokomis : If you could make a DJI Fly APK that wouldn't be blocked/hidden on the Enterprise RC's... You would make a ton of people very happy. Including myself.

[2024-07-14 11:45:52] infinitydrones : If you own a Phantom 4 series drone. This is for you. https://youtu.be/8BuXkkd2W0w

[2024-07-14 13:43:52] pingspike : sign me up for a modded Pilot 2 app with FCC enabled on the RC Pro Enterprise too

[2024-07-17 03:01:56] propz : propz joined the channel.

[2024-07-17 09:06:34] flylusive_pat : Do not upgrade the Mini 3 Pro to version 01.00.0800. Those "bug fixes" are aimed at making hacking the drones harder. Avoid upgrading if you want your Mini 3 Pro hackable in the upcoming months!

[2024-07-19 06:20:32] djihacker : djihacker joined the channel.

[2024-07-19 06:52:09] djihacker : Does dh support obtaining root shell permissions for autel drones?

[2024-07-19 07:09:05] flylusive_pat : no

[2024-07-19 08:09:22] djihacker : Hope it will be supported in the future

[2024-07-19 08:18:08] flylusive_pat : there is no plan in adding autel drones

[2024-07-19 08:54:24] djihacker : :smiling_face_with_tear: okkay

[2024-07-19 11:07:12] infinitydrones : DJI has 70% of the market... so developing for the other 30% that is subdivided into probably 100s of companies does not really make sense sadly. Autel, Skydio, Hubsan etc come to mind but that means they each have a max of 10% marketshare, so basically they all little fish.

[2024-07-19 14:04:55] konraditurbe : Maybe for US market... If DJI gets banned.

[2024-07-20 14:34:39] jcase : i mean, you dont even need to "hack" autels for root lol

[2024-07-20 15:27:10] djihacker : :rolling_on_the_floor_laughing: hhhaha okkay

[2024-07-23 08:22:02] flylusive_pat : @here Hi guys! Feel free to join our Discord server: https://discord.gg/Kx9vwqBNXV - we will be posting updates / beta releases there.

[2024-07-23 10:00:30] cs2000 : cs2000 updated the channel purpose from: A place to go for help or questions around the Drone-Hacks application available from Drone-Hacks.com to: A place to go for help or questions around the Drone-Hacks application available from Drone-Hacks.com - https://discord.gg/Kx9vwqBNXV

[2024-07-23 10:00:45] cs2000 : cs2000 updated the channel header from: **Drone-Hacks Homepage:** Up | **Support:** Up | **Latest Desktop Version:** 1.45 | **DH Companion Version:** 1.0.26 to: **Drone-Hacks Homepage:** Up | **Support:** Up | **Latest Desktop Version:** 1.47 | **DH Companion Version:** 1.0.26

[2024-07-24 12:19:11] d0ps : d0ps joined the channel.

[2024-07-26 15:52:57] ogini_ayotanom : ogini_ayotanom joined the channel.

[2024-07-27 12:17:15] vicgoncharenko : vicgoncharenko joined the channel.

[2024-07-27 14:31:43] prabhu8489 : prabhu8489 joined the channel.

[2024-07-29 09:07:27] flylusive_pat : https://blog.drone-hacks.com/mavic-3-droneid-removal-update/

[2024-07-29 12:43:57] pingspike : > we have decided to permanently discontinue the DroneID removal feature

[2024-07-29 12:44:13] pingspike : disappointing news :confused:

[2024-07-29 20:49:45] sparkyws : Very disappointing news ?

[2024-07-30 09:27:18] flylusive_pat : Yeah, we know, but goods news are about to come soon ;)

[2024-07-30 10:48:42] loveyou : No need to worry. Since hacks sells

[2024-07-30 12:24:24] cs2000 : It is a shame, but like @flylusive_pat says, good stuff is coming soon, you will all be excited when it drops!

[2024-07-30 20:49:28] infinitydrones : Hi all! I have some epic news! I was able to get my hands on the new DH 2.0 client and what can I say! This changes EVERYTHING! It will blow your mind! That's how awesome it is. You guys can expect some great improvements and features!

[2024-07-30 20:49:36] infinitydrones :

[2024-07-31 06:46:06] andris8888 : Can it flash Mini 3? :)

[2024-07-31 10:50:48] infinitydrones : current dronehacks can also flash the mini 3

[2024-07-31 10:50:54] infinitydrones : not sure what you mean?

[2024-07-31 10:51:13] infinitydrones : firmware updates via dronehacks as always been available for all drones, even controllers

[2024-07-31 18:41:23] andris8888 : DH is unable to flash Mini 3. You can check it. I also talked about it with cs2000.

[2024-07-31 18:42:06] andris8888 : Mini 3 Pro works but Mini 3 not.

[2024-07-31 19:06:48] royeiror : Hopefully with DH2.0 we'll be able to flash and hack both.

[2024-07-31 21:07:44] cs2000 : I don't know the technicalities and I'm sure @flylusive_pat will chime in, but I **believe** you will be able to (flashing at the very least). I know flashing became problematic after a certain mini 3 firmware was released and Bin4ry didn't say much other than it couldn't really be fixed with the current version of DH

[2024-07-31 21:07:44] cs2000 : I don't know the technicalities and I'm sure @flylusive_pat will chime in, but I **believe** you will be able to (flashing at the very least). I know flashing became problematic after a certain mini 3 firmware was released and Bin4ry (as he was running DH at the time) didn't say much in terms of detail other than it couldn't really be fixed with the current version of DH

[2024-07-31 21:25:31] hate : hate joined the channel.

[2024-08-01 14:47:19] cs2000 : Guys, the program for beta testers for DH is open, if you want to test the software you need to do the following: - Join the discord server (https://discord.gg/Kx9vwqBNXV) - Have a minimum of 5 purchased licenses in your DH account - Have held your DH account for at least 30 days - No record of any disputes or refunds Licenses for the beta test aren't free, however any testers will get 35% off on the models you'll be testing and the license is permanent, so represents a good discount too. **Only users ready to purchase DH Regular license & who fulfill the above criteria need to apply.** If you do, hop into the discord and direct message "Pat" on the server with your DH username, he will run the checks and inform you of the next steps.

[2024-08-04 03:05:08] s1m0n : **it's a shame that Drone Hacks was sold.. but a shame that the new Drone "Hacks" thinks it's a new regulatory authority. It's time to hack DroneHacks to remind them of their roots**

[2024-08-04 10:09:50] flylusive_pat : We have to follow rules as well. Our goal is to bring new hacks to the public scene as quickly as possible.

[2024-08-04 10:10:51] flylusive_pat : Yes, DH 2 will be able to flash it - just not in the first release.

[2024-08-04 10:11:06] flylusive_pat : The first release is targeted towards adding new hacks.

[2024-08-04 10:55:30] flylusive_pat : Also @andris8888 - DH 2 will provide "DA2-like" experience, you will be able to directly flash firmware without having to download it first from our GUI.

[2024-08-04 10:56:06] flylusive_pat :

[2024-08-04 13:02:26] flymymavic : Im having the same issue with an original MP licence, ive dropped a ticket and will see what they can do

[2024-08-04 13:50:48] flylusive_pat : @flymymavic What's going on with your original MP license? (specify the issue you are having please)

[2024-08-04 13:50:48] flylusive_pat : @flymymavic What's going on with your original MP license?

[2024-08-05 08:14:00] flylusive_pat : Guys, I've been getting a lot of DMs asking if purchased licenses for DH 1 will work with DH 2.0 - **yes, they will.** You can register a license on DH 1 and then use it on DH 2 and vice versa.

[2024-08-05 08:18:36] cs2000 : @s1m0n i really wouldn't start throwing around baseless accusations....especially threats. "Old" DH also did not do plenty of things as it would break German law, you just didn't ever hear about them. As for it being a shame DH was sold, yeah of course, i, like many others also wish for the past to still be the present, i miss the times when people like Bin4ry, Hostile and many **many** others were part of this place on a daily basis, but life moves on, people lose interest and want to try other things. What would you rather, that Bin4ry simply said "fuck it, im done", shut down the DH servers and the entire thing died? Naa, didn't think so. @flylusive_pat has breathed fresh new life into DH which (due to many reasons) Bin4ry lost the time and passion for, and this is just the start. If you have questions about the removal of the DroneID hack, direct message Pat. I don't know how much more there is to say on the subject, but it helps nobody & makes you look stupid when you say something with absolutely no knowledge on the matter just to spread disinformation. ❗**As a warning, any further accusations that are just pure speculation that are way off the mark will be met with a warning from me. Do it again and you're gone, the ban hammer will be used. The same applies for ANY community project, be it DH, NLD, DDD, OG-Tools, whatever it is, i don't care. People work hard on these tools for the benefit of the community, this is true if the project commercial or free-to-use. We don't need toxic people in here so consider this your warning.**❗

[2024-08-05 08:18:36] cs2000 : @s1m0n i really wouldn't start throwing around baseless accusations....especially threats. "Old" DH also did not do plenty of things as it would break German law, you just didn't ever hear about them. As for it being a shame DH was sold, yeah of course, i, like many others also wish for the past to still be the present, i miss the times when people like Bin4ry, Hostile and many **many** others were part of this place on a daily basis, but life moves on, people lose interest and want to try other things. What would you rather, that Bin4ry simply said "fuck it, im done", shut down the DH servers and the entire thing died? Naa, didn't think so. @flylusive_pat has breathed fresh new life into DH which (due to many reasons) Bin4ry lost the time and passion for, and this is just the start. If you have questions about the removal of the DroneID hack, direct message Pat. I don't know how much more there is to say on the subject, but it helps nobody & makes you look stupid when you say something with absolutely no knowledge on the matter just to spread disinformation. **As a warning, any further accusations that are just pure speculation that are way off the mark will be met with a warning. Do it again and you're gone, the ban hammer will be used. The same applies for ANY community project, be it DH, NLD, DDD, OG-Tools, whatever it is, i don't care. People work hard on these tools for the benefit of the community, this is true if the project commercial or free-to-use. We dont need toxic people in here so consider this your warning.**

[2024-08-05 08:18:36] cs2000 : @s1m0n i really wouldn't start throwing around baseless accusations....especially threats. "Old" DH also did not do plenty of things as it would break German law, you just didn't ever hear about them. As for it being a shame DH was sold, yeah of course, i, like many others also wish for the past to still be the present, i miss the times when people like Bin4ry, Hostile and many **many** others were part of this place on a daily basis, but life moves on, people lose interest and want to try other things. What would you rather, that Bin4ry simply said "fuck it, im done", shut down the DH servers and the entire thing died? Naa, didn't think so. @flylusive_pat has breathed fresh new life into DH which (due to many reasons) Bin4ry lost the time and passion for, and this is just the start. If you have questions about the removal of the DroneID hack, direct message Pat. I don't know how much more there is to say on the subject, but it helps nobody & makes you look stupid when you say something with absolutely no knowledge on the matter just to spread disinformation. ❗**As a warning, any further accusations that are just pure speculation that are way off the mark will be met with a warning from me. Do it again and you're gone, the ban hammer will be used. The same applies for ANY community project, be it DH, NLD, DDD, OG-Tools, whatever it is, i don't care. People work hard on these tools for the benefit of the community, this is true if the project commercial or free-to-use. We don't need toxic people in here so consider this your warning. This applies to public comments or messages in DM's that are reported to me.**❗

[2024-08-05 08:44:54] s1m0n : I'm happy for you and hope you got a good price. Nevertheless, from a pirate's point of view, it feels wrong. Pirates don't submit, but you handed the treasure over to the navy (my subjective perception)

[2024-08-05 08:51:05] s1m0n : I have no problem with Pat, but I find the attitude questionable

[2024-08-05 09:00:08] cs2000 : There is no "handing over the treasure to the navy". Pat may wish to correct me but i believe it is a case of "you cannot do this otherwise you're liable to receive a huge fine/prison time". With other hacks DH offers, it's up to the user. DH can remove NFZ's (and obviously, flying inside them without approval is against the law), but the onus is on you, the operator to fly safely and legally. If you dont, DH cannot get into trouble. For example, your car can easily break the speed limits (even in modern cars that can read speed signs and set limits, you can disable this system usually at the press of a button). But the car manufacturer doesn't get fined if you get caught exceeding the speed limit, you do as you were driving the vehicle. However, when you start turning off legally mandated "safety systems", it crosses a line from a gray area into something that legally is indefensible.

[2024-08-05 09:00:08] cs2000 : There is no "handing over the treasure to the navy". Pat may wish to correct me but i believe it is a case of "you cannot do this otherwise you're liable to receive a huge fine/prison time". With other hacks DH offers, it's up to the user. We can remove NFZ's (and obviously, flying inside them without approval is against the law), but the onus is on you, the operator to fly safely and legally. If you dont, DH cannot get into trouble. For example, your car can easily break the speed limits (even in modern cars that can read speed signs and set limits, you can disable this system usually at the press of a button). But the car manufacturer doesn't get fined if you get caught exceeding the speed limit, you do as you were driving the vehicle. However, when you start turning off legally mandated "safety systems", it crosses a line from a gray area into something that legally is indefensible.

[2024-08-05 09:00:08] cs2000 : There is no "handing over the treasure to the navy". Pat may wish to correct me but i believe it is a case of "you cannot do this otherwise you're liable to receive a huge fine/prison time". With other hacks DH offers, it's up to the user. DH can remove NFZ's (and obviously, flying inside them without approval is against the law), but the onus is on you, the operator to fly safely and legally. If you don't, DH cannot get into trouble as your own hands/fingers told the drone to fly inside that NFZ For example, your car can easily break the speed limits (even in modern cars that can read speed signs and set limits, you can disable this system usually at the press of a button). But the car manufacturer doesn't get fined if you get caught exceeding the speed limit, you do as you were driving the vehicle. However, when you start turning off legally mandated "safety systems", it crosses a line from a gray area into something that legally is indefensible.

[2024-08-05 09:07:36] flylusive_pat : Yeah it's as cs2000 said. Even through DroneID in most countries is somewhat legal to remove (and RemoteID is not - that is mandatory), there are countries where **any** modifications done to prevent the drone being detected is against law.

[2024-08-05 09:23:21] s1m0n : you write as if you were powerless... instead you give in. you know that and everyone in this milieu knows how to conceal their identity... if someone dropped a free tool or code like the old, real OGs, the internet would sort out the rest on its own without anyone having to be afraid. I know DH1.0 has always officially distanced itself from deactivating the dID, but it was justified in a more understandable way. it is a pity how the freedom of every person on this planet is being curtailed more and more

[2024-08-05 09:44:51] cs2000 : Well break out your coding tools and get figuring it out yourself then. The realm in which DH and any legally registered business operates in is very different to what you or i can release on our own, you have to remember that. Anyway, i'm not wasting any more time on this discussion. You've been given the reasons, it's your choice to accept them or not, it doesn't really matter as the decision is made

[2024-08-05 10:48:44] s1m0n : To my shame, I have to admit that my programming skills are not sufficient for this ?. but I can support with money!

[2024-08-05 12:19:28] pingspike : @flylusive_pat you said: > We just cannot offer "buy this and remove DroneID" What's the blocker here? Is it the country you are based in that makes this an illegal thing for you to sell?

[2024-08-05 13:50:13] flylusive_pat : Yes.

[2024-08-05 14:00:44] theguac : theguac joined the channel.

[2024-08-05 15:30:50] vanhandle2 : vanhandle2 joined the channel.

[2024-08-05 18:50:12] flymymavic : It's ok I got in touch with support who will manually add the licence, not sure what I did wrong as I successfully ported 3 other accounts over, just one didn't work correctly

[2024-08-06 06:53:14] andris8888 : I not in the M3 scene, but why not just release the dID hack into the wild (like in the old days, OG tools, etc) so the users can figure out. That way it is not connected to DH and everyone is happy.

[2024-08-06 06:53:14] andris8888 : I am not in the M3 scene, but why not just release the dID hack into the wild (like in the old days, OG tools, etc) so the users can figure out. That way it is not connected to DH and everyone is happy.

[2024-08-06 15:21:32] theufodroner : theufodroner joined the channel.

[2024-08-07 09:46:19] hmour : hmour joined the channel.

[2024-08-07 09:57:34] hmour : Hi, i'm trying to get the maximum possible transmission power out of my phantom 3. I found the dji_configs method but it seems to be built around the dji go 4 app which doesn't work for the phantom 3 series of drones. Normally i'd assume that this mod isn't compatible with the p3 but the 32 channel mod says it has been tested on the P3P, P3A and P4P. Can someone please clarify what's going on?

[2024-08-07 12:30:29] jcase : I mean, s1m0n, when people used to cry about me charging for roots/jailbreaks, i always told them why dont they jsut invest the time and money to do it themselves. Same applies here

[2024-08-07 12:39:10] s1m0n : I'm not complaining about the money. I'm complaining that the opportunity is not offered and I offer financial support to those who want to develop an open source solution ala CIA JD

[2024-08-07 12:52:26] jcase : Open source solution to kill droneid? is that what you are asking for?

[2024-08-07 12:52:36] jcase : because CIA JD doesnt do that, just censors it to some degree

[2024-08-07 12:53:32] jcase : but what you are asking for is going to seriously piss off the FAA and FCC. I've developed such a solution in the past, and I've also worked closely with FAA/FCC in the past.

[2024-08-07 12:55:31] jcase : I've been interrogated by FBI, Secret Service and US Marshalls. Hands down, the two US agencies I wouldnt piss off are the FAA and FCC. (Side note, those interrogations were over technically legal at the time actions, but sure pissed everyone off. Wouldnt do them these days, illegal now.)

[2024-08-07 12:56:21] jcase : doesnt matter that DH is overseas, if they released something like that and it caused a scene in the US, shit would go down.

[2024-08-07 15:38:21] s1m0n : yes, something like that. Being able to protect your personal data without violating other people's personal rights or causing any other damage.

[2024-08-07 18:26:38] dkovar : Rather than hacking DJI in a way that will likely attract unwanted attention, why not fly something else? And let DH be successful in whatever way they can. They've been here forever and have helped many, many people. Disabling DroneID isn't a business venture that will generate sustainable revenue. It is a passion project for a few people. And doing it for DJI platforms likely requires an ongoing investment rather than a one time thing.

[2024-08-12 09:54:52] z1904631987 : z1904631987 joined the channel.

[2024-08-14 20:45:20] dezz : dezz joined the channel.

[2024-08-16 11:46:43] efwefaf : Does anyone know how M3M enters recovery mode

[2024-08-16 13:54:10] yoyo : yoyo joined the channel.

[2024-08-18 11:13:06] mldma : mldma joined the channel.

[2024-08-19 10:35:50] zyxel : zyxel joined the channel.

[2024-08-20 06:54:06] s1m0n : but you don't have to worry about the police / air security?‍♂️. I didn't do anything bad.. I was in nature, on a meadow by a river. But Prince Harry was in the city, which is why a complete no-fly zone had been set up 5km around the city.. I didn't notice

[2024-08-20 07:45:55] konraditurbe : harsh reminder not to use newer DJI aircrafts and stick to what's going to save your ass someday

[2024-08-20 18:57:05] quad808 : You as the pilot, are responsible for knowing all flight laws and restrictions. Not the software. If your drone was not hacked at all, and DJI's NFZ for some reason wasn't working, and you got in trouble, just like you are reporting....would you blame DJI or would you blame yourself, who is in control of the craft?? @s1m0n ?

[2024-08-20 18:57:05] quad808 : You as the pilot, are responsible for knowing all flight laws and restrictions. Not the software. If your drone was not hacked at all, and DJI's NFZ for some reason wasn't working, and you got in trouble, just like you are reporting....would you blame DJI or would you blame yourself, who is in control of the craft??

[2024-08-21 03:46:27] espacial : espacial joined the channel.

[2024-08-21 05:19:20] s1m0n : Who says the drone was hacked at that time? The drone had been on the market for 5 weeks at that time. But an interesting objection with the NFZ... that will certainly be used in court. I actually wanted to cast doubt on the "Aeroscope" measuring method, which relies solely on the voluntary statements of the drone.. But I hadn't even thought that the drone shouldn't have been allowed to fly there. Smart man!

[2024-08-21 20:12:59] alt.nq-5711k93 : alt.nq-5711k93 joined the channel.

[2024-08-22 08:47:22] flylusive_pat : Hello @everyone , We are excited to announce the opening of our new store, where you can now purchase refurbished DJI batteries. Please be aware that we currently ship these batteries exclusively within the EU (shipping is free of charge!), and quantities are limited due to our reliance on the refurbishment. You can visit the store here: https://store.drone-hacks.com/

[2024-08-22 18:35:19] clait : clait joined the channel.

[2024-08-23 12:58:38] pingspike : @s1m0n your screen shots look like you received a ransom note :grimacing:

[2024-08-28 10:10:52] djihacker : Can add support for mini4pro firmware root? Thanks :grinning:

[2024-09-01 06:49:47] tacioli.master : tacioli.master joined the channel.

[2024-09-05 07:25:05] infinitydrones : Anyone know if the dji mavic mini (mini 1) can be downgraded from 01.00.0600 to 01.00.0500 as there is an arb increase The drone hacks site does not show 01.00.0600

[2024-09-11 21:55:39] taters66 : taters66 joined the channel.

[2024-09-11 22:11:19] fred73 : fred73 joined the channel.

[2024-09-12 07:56:49] djihacker : Will the relevant Settings of dji no be added in the future?

[2024-09-12 13:04:33] cs2000 : Im sure they will, remember its only been out a few days!

[2024-09-14 06:04:37] djihacker : dji neo I did not detect any trace of it launching droneid :grin:

[2024-09-15 19:32:34] pingspike : @djihacker what are you using to detect : trace?

[2024-09-16 09:18:06] djihacker : Drone detection equipment

[2024-09-16 09:27:53] kilrah : parameter edits work fine, although it seems to reset/ignore a bunch of stuff :(

[2024-09-17 16:24:53] harryemery92 : I tried to get atti mode on the neo and just gets ignored and reset back to cini mode

[2024-09-21 03:56:48] plugandplaytor : plugandplaytor joined the channel.

[2024-09-30 09:16:21] flylusive_pat : ? Drone-Hacks v2 Public Beta Has Been Released Today! ? We’re excited to announce that Drone-Hacks v2 Public Beta is out today, with support for the Mini 3 Pro! ? ? Current Features for Mini 3 Pro: Permanent NFZ Removal Permanent 500 m Altitude Removal Permanent FCC Hack We support all firmware versions (except 01.00.0900 – no way to downgrade yet). ? Download Now: https://drone-hacks.com/download-v2 ? Read the blog post: https://blog.drone-hacks.com/fcc-altitude-nfz-hack-for-mini-3-pro-is-now-available/ Thank you for your support! ? (DH v2.0.0 Public Beta supports only Mini 3 Pro)

[2024-10-04 03:48:42] drhydephd : drhydephd joined the channel.

[2024-10-07 18:41:48] tokertm : tokertm joined the channel.

[2024-10-11 17:41:20] s1m0n : Why doesn't DroneHacks offer a high accuracy hack or NFZ bypass for the Air3? It is also offered for other drones and at the time you could officially buy both hacks for the Air3 via Flylusive's website. You included the mini3p in your range, why not the Air3?

[2024-10-11 18:10:21] flylusive_pat : different firmwares

[2024-10-11 18:10:26] flylusive_pat : flylusive did a different thing

[2024-10-11 18:10:42] flylusive_pat : and no it's not possible to add air 3 with flylusive knowledg

[2024-10-11 18:10:42] flylusive_pat : and no it's not possible to add air 3 with flylusive knowledge

[2024-10-12 18:23:30] s1m0n : I don't think that they are different firmwares. I first bought the FCC patch from DH (and activated it) and then sent my drone to Flylusive and when the drone came back, the FCC patch was still active, + the new patches from Flylusive

[2024-10-12 18:23:30] s1m0n : I don't think that they are different firmwares. I first bought the FCC patch from DH (and activated it) and then sent my drone to Flylusive and when the drone came back, the FCC patch was still active, + the new

[2024-10-12 20:22:57] cs2000 : With all due respect @s1m0n, they **are** different firmwares. You cannot ever compare what one company does to a drone vs another. The way Flylusive did things was **entirely** different to how DH does things. Put it this way, DH is a company that sells a product, do you not think if it was possible to support more drones and thus sell more of the product that they would do so? They aren't just holding stuff back because its fun or something.

[2024-10-13 04:02:01] diikoo : diikoo joined the channel.

[2024-10-13 09:03:10] s1m0n : I don't know. Maybe the profit prospects for the Air3 are simply too low that it's not worth putting in the work. I can say that I updated the Air3 to version .1000 especially for the DH-FCC patch and then sent the drone to Slovakia. The sealed screw on the drone was not opened, and when the drone came back I still had the FW .1000 on it and the High Altitute Hack (limited to 3000m for 3 years) active - with FCC Patch from DH

[2024-10-13 09:03:10] s1m0n : I don't know. Maybe the profit prospects for the Air3 are simply too low that it's not worth putting in the work. I can say that I updated the Air3 to version .1000 especially for the DH-FCC patch and then sent the drone to Slovakia. The sealed screw on the drone was not opened, and when the drone came back I still had the FW .1000 on it and the High Altitute Hack (limited to 3000m for 3 years) active.

[2024-10-13 18:27:31] quad808 : There is a huge difference in physically accepting a drone, hacking it in person with various tools, rather than coding something that is automated into Drone Hacks to be able to be done by a non-techy person.

[2024-10-14 08:43:31] s1m0n : thank you for your assessment

[2024-10-14 11:51:14] flylusive_pat : Drone-Hacks 2.0.1 has been released. ・DJI Neo Basic support (firmware flashing, reading AC data) ・DJI Assistant 2 Presence Check on start-up ・Bug Fixes

[2024-10-14 14:48:04] vudla : vudla joined the channel.

[2024-10-15 14:54:21] iammins : iammins joined the channel.

[2024-10-21 01:53:56] supermario7331 : supermario7331 joined the channel.

[2024-10-21 16:43:37] mr_andersson : Is drone-hacks down? I'm trying to login but all I'm getting is "POST https://drone-hacks.com/api/v1/auth/login 500 (Internal Server Error)" in the browser log.

[2024-10-21 17:06:17] joonas : you're not alone, i just ran into the same issue

[2024-10-21 18:33:20] flylusive_pat : ? Announcement: Login and Registration Issue We experienced an issue with logging in and registering. The cause was identified (external service), and it has now been fully resolved. Thanks for your patience!

[2024-10-21 20:00:42] indimind : external service? ;-)

[2024-10-22 06:32:05] flylusive_pat : Recaptcha

[2024-10-23 18:16:42] hab : hab joined the channel.

[2024-10-29 00:37:29] ololosha : ololosha joined the channel.

[2024-10-30 01:53:19] ssemmedo : ssemmedo joined the channel.

[2024-10-30 01:54:11] ssemmedo : how to downgrade mini 2 se to v0.360. i have now v0.410

[2024-11-01 11:34:00] home114 : home114 joined the channel.

[2024-11-18 12:11:22] enigma2 : enigma2 joined the channel.

[2024-11-23 08:27:57] ksjr927 : ksjr927 joined the channel.

[2024-11-26 16:58:47] ox3d : ox3d joined the channel.

[2024-11-27 18:20:47] seveneightoo : seveneightoo joined the channel.

[2024-11-28 10:12:29] andris8888 : Hello Everyone! Is there any way that the Mini 3 firmware flashing issue is solved? I have a Mini 3 (like before) and DH still cannot flash the firmware on it. Any news on this issue?

[2024-11-28 13:34:28] oakley75 : Unfortunately, Pat and company keep saying they aren't expecting to ever support it.

[2024-11-28 13:35:06] oakley75 : Unfortunately, Pat and company keep saying they aren't expecting to ever support it. But to flash, you have to use the 2.0 beta, but you likely know that.

[2024-11-28 13:35:06] oakley75 : Unfortunately, Pat and company keep saying they aren't expecting to ever support it.

[2024-11-28 13:35:06] oakley75 : Unfortunately, Pat and company keep saying they aren't expecting to ever support it. But to flash you have to use the 2.0 beta, but you likely know that

[2024-11-29 00:34:03] areoc : I can do it

[2024-11-29 12:36:50] flylusive_pat : DH v2 can do it as well

[2024-11-29 12:36:52] flylusive_pat : lol

[2024-11-29 12:37:15] flylusive_pat : (it will say NOT COMPATIBLE but should work)

[2024-12-04 10:44:19] andris8888 : I only found 2.0.4 public beta and it says connection issues.

[2024-12-04 16:22:12] andris8888 : can someone point me to the 2.0 beta download?

[2024-12-04 20:30:04] oakley75 : https://releases.drone-hacks.com/releases/Drone-Hacks_2.0.4_x64_en-US.msi

[2024-12-04 20:30:54] oakley75 : it's still beta though, not aware of a public release yet

[2024-12-04 20:54:40] andris8888 : I have this but it has connection issues with mini 3 (mini 3 pro works fine!)

[2024-12-04 22:52:56] oakley75 : I didn't think the mini3 was supported, but still should flash though. But I have version 2.0.0 if that's what you're after.

[2024-12-04 22:52:56] oakley75 : I didn't think the mini3 was supported. But I have version 2.0.0 if that's what you're after.

[2024-12-04 22:52:56] oakley75 : I didn't think the mini3 was supported.

[2024-12-04 22:55:40] oakley75 : I will say that DH v2.0.1 simply would not work for me (wouldn't connect) under windows 10 (trying to flash Neo), but it worked just fine in windows 11.

[2024-12-04 22:55:40] oakley75 : I will say that DH v2 simply would not work for me under windows 10 (trying to flash Neo), but it worked just fine in windows 11.

[2024-12-04 22:55:40] oakley75 : I will say that DH v2.0.1 simply would not work for me under windows 10 (trying to flash Neo), but it worked just fine in windows 11.

[2024-12-05 00:20:27] ki4gyw : ki4gyw joined the channel.

[2024-12-05 10:38:27] andris8888 : thank you, can you please send me the 2.0.0 version?

[2024-12-05 11:53:51] andris8888 : I found the 2.0.0 but as soon as I start it it automatically updates itself so I cannot use it...

[2024-12-05 21:26:03] andris8888 : It doesnt work because the mini 3 communication and fw flashing is different from the other drones. @cs2000 told me about it if I remember correctly

[2024-12-05 21:34:21] cs2000 : It was a thing in old drone-hacks from what Bin4ry told me, I wasn't ever told the actual reason why it wasn't possible to add without a lot of work. I don't have a non pro mini 3 to test with but @flylusive_pat did say in discord it's "unsuppprted" but should work.

[2024-12-06 06:29:03] shinoby : I can flash mini 3 via remote connection, if this suits you, you can contact me

[2024-12-06 10:06:44] flylusive_pat : yeah I got it to work

[2024-12-06 10:07:24] flylusive_pat : when I'll have some time I'll find my Mini 3 and include it in supported models

[2024-12-06 10:07:34] flylusive_pat : but I remember it was working just fine

[2024-12-06 10:07:47] flylusive_pat : just drop the flashing program

[2024-12-06 10:09:49] flylusive_pat : this is drone-hacks group, not advertising group

[2024-12-06 10:11:13] flylusive_pat : either drop the program and let us verify if it does not contain anything malicious or advertise it somewhere else

[2024-12-06 10:11:52] flylusive_pat : i also find it weird that flashing prices are not public, everyone should have the same price if you're selling it

[2024-12-06 10:14:28] flylusive_pat : i don't blame you at all for selling a solution, that's all fine, but please if you do, make a website where we/someone else can verify the prices and the program itself.

[2024-12-06 11:03:50] andris8888 : does anyone have a python script that I can try to flash this mini 3?

[2024-12-06 15:48:42] jcase : someone loan me a mini 3 and ill do a flashing program for it, and release publicly

[2024-12-06 15:48:42] jcase : someone loan me a mini 3 and ill do a flashing program for it, and release publicly for free

[2024-12-06 15:49:03] jcase : or ill git it to dronehacks

[2024-12-06 17:59:46] flylusive_pat : @jcase it's same ftp based upload mechanism

[2024-12-06 17:59:56] flylusive_pat : they just changed 2 to 4 in the payload

[2024-12-06 18:00:07] jcase : Ah

[2024-12-06 18:00:11] flylusive_pat : i'll release it but need to find mini 3

[2024-12-06 18:00:33] flylusive_pat : we need to properly fix the serial comm. first (that's main reason why it's still unsupported)

[2024-12-06 18:00:38] flylusive_pat : (all others are bulk)

[2024-12-06 20:59:48] jcase : old ones are all serial

[2024-12-07 04:05:05] shinoby : I don't remember asking for payment for doing this (of course not in the case when you are doing repairs and I will have to do this for you every day)

[2024-12-07 16:26:51] andris8888 : I am only familiar with the olden dji_tools from the OG times. Are there any script I can use from that package to upload the fw? Or are there new packages or tools out there?

[2024-12-11 08:14:12] andris8888 : anyone here who can send me a short instruction on what script/commands should I use to flash the mini 3 via terminal? I don't need gui tools, I am familiar with python, etc. Thank you!

[2024-12-11 08:24:38] flylusive_pat : Hey Andris, I'd send you a flashing script if I had. I can only help with when we will add flashing for Mini 3 you can try it. (I.e.: join beta testers on Discord).

[2024-12-13 01:30:40] david2212 : david2212 joined the channel.

[2024-12-13 10:37:28] andris8888 : Thank you!!! I joined the DH Discord earlier but couldn't find any beta testing group. I wrote a message there, hopefully someone will respond or point me to the right direction.

[2024-12-15 22:26:43] steadyquad : steadyquad joined the channel.

[2024-12-23 13:01:36] osama-binladen : osama-binladen joined the channel.

[2024-12-26 08:33:37] flylusive_pat : ? BIGGEST RELEASE IS HERE! ? Hi @everyone , We’re beyond excited to announce the biggest release of the year! ? Thanks to your support, we’ve expanded NFZ & Altitude Removal compatibility for the new models. Here's what the new release added: Mini 3 Pro (For Firmware 01.00.0900 - Also Based on Latest Firmware) Mavic Air 3 (Latest Firmware - Also Based on Latest Firmware) Mavic 3 (Latest Firmware - Also Based on Latest Firmware) Mavic 3 Classic (Latest Firmware - Also Based on Latest Firmware) Mavic 3 Pro (Firmware up to 01.01.0600 – Note: Latest 01.01.0700 is NOT supported! - Based on 01.01.0300 FW) Mavic 3 Enterprise (Including Thermal & Multispectral - Latest Firmware - Also Based on Latest Firmware) Matrice 30 & 30 T (Latest Firmware – Buy Button is not yet available on the website, but you can reach out in ⁠general if you're interested. Your feedback is key to help us refine this and release it! - Also Based on Latest Firmware) ? Head over to https://drone-hacks.com/available-hacks to grab it now! NEWS: FCC Hack without the PC client! Now you can manage FCC settings directly in DJI Fly. Instructions are available here: https://wiki.drone-hacks.com/en/dh2-cfc-commands Full instructions for applying hacks can be found here: https://wiki.drone-hacks.com/ Important Reminders: ? NEVER update DJI Fly, DJI RC, or your drone firmware. Updates WILL enforce changes that block our hacks, and recovering your drone could be tricky. ? Avoid 3rd-party hacks (Such as FCC mods)! We've seen numerous cases where non-Drone-Hacks modifications caused crashes, boot loops, or other critical issues affecting flight stability. Stick with Drone-Hacks only and make sure you read the tutorial (or if you are not sure about step, ask in ⁠support )! A Part of Our Commitment: If you previously purchased the Mavic Air 3 FCC hack or Mavic 3 DH v1 hacks, your license has been automatically upgraded to include NFZ and Altitude hacks with DH v2! ? Other Updates: DH v1 for Mavic 3 is officially discontinued. Hacks for Mavic 3 now require DH v2. Price Adjustment: Due to inflation and increasing drone prices, the license fee for the Mavic 3 series (Non-Enterprise series), Mavic Air 3, and Matrice 30 models has increased from €40 to €50. Mini 3 Pro and all older products/models are NOT affected by this price change. Thank you for your understanding and support—it keeps the Drone-Hacks community! Happy holidays! ? Best regards, Pat & The Drone-Hacks Team

[2024-12-26 08:33:50] flylusive_pat : https://drone-hacks.com/discord/join

[2024-12-26 17:14:31] flymymavic : Great news guys, any news when the Mini 4 pro will be added

[2024-12-27 01:20:26] huki : huki joined the channel.

[2024-12-28 08:10:33] s1m0n : Can i use my dh2 Lizens, without loosing the Patches from flight Contoller, to disbale DroneID? Or will i lost that Feature ?

[2024-12-28 08:11:29] s1m0n : Can i use my dh2 Lizens, without loosing the Patches from flight Contoller, to disbale DroneID? Or will i lost that Feature ?..on my Air3

[2024-12-28 08:11:29] s1m0n : Can i use my dh2 Lizens, without loosing the Patches from flight Contoller, to disbale DroneID? Or will i lost that Feature ?

[2025-01-07 08:43:44] fons : fons joined the channel.

[2025-01-13 07:51:49] pingspike : @flylusive_pat @cs2000 I tried posting this on discord and got an immediate ban for 2hrs :face_with_rolling_eyes:

[2025-01-13 07:51:55] pingspike : so posting it here instead:

[2025-01-13 07:52:38] pingspike : can I submit a change request for this page please https://wiki.drone-hacks.com/check-fcc-or-ce The first line of text says, `On Android the 1km text will move higher than the line if the drone is in FCC mode (see red square)` But the first image immediately underneath that line of text is the CE image, not the FCC image. Similarly on the `DJI Fly – iOS` section further down the same page, the first line of text there says, `On iOS the white 1km line will move to -87 dB if the drone is in FCC mode (see red square)` but the image shown is not the FCC image and the line is nowhere near \-87db, because it's the CE image. It's doesn't read well, the images need to be swapped around so it says "here's the thing you need to check to see if you're FCC" then show the corresponding image, not the opposite image :)

[2025-01-13 07:55:23] pingspike : (ignore, resolved)

[2025-01-13 12:07:46] s1m0n : Just to Show, whats real possible. They kicked me on discord because I ask too many questions... but they were happy to take the money ?. You ignore me, I provide clarity on all platforms

[2025-01-13 13:39:41] flylusive_pat : You were kicked because you threatened me while I gave you clear answer.

[2025-01-13 13:40:45] flylusive_pat : If you asked questions all would be fine - but saying that DH and Pat "is evil" because I had 0 time to reply to you and test your setup that BTW is not part of DH v2 hacks was the reason.

[2025-01-13 13:40:56] flylusive_pat :

[2025-01-15 08:53:26] flylusive_pat : disco

[2025-01-18 22:09:12] johnnokomis : With DJI's recent geofencing policy change, does it make NFZ removal unnecessary now?

[2025-01-19 10:20:16] konraditurbe : Yep, for US and UK

[2025-01-20 02:06:45] johnnokomis : For older drones using pre DJI Fly/Pilot 2 flight apps, are they receiving the same change?

[2025-01-21 15:01:39] tokertm : Not really un-neccesary to stop NFZ removal. There's still other continents that have the restrictions, plus it only takes one authority to ask for it to be implemented partially or fully again and it'll be done with another flysafe update.

DJI-Rev Mattermost Archive

Messages in dronehacks

DJI-Rev Mattermost Archive

Messages in dronehacks

User Info