Channel Messages

[2018-03-29 18:24:11] david077 : @david077 has joined the channel

[2018-03-31 06:01:16] andrwho25 : @andrwho25 has joined the channel

[2018-03-31 17:01:55] codeforge : @codeforge has joined the channel

[2018-04-03 18:02:19] tjtyler : @tjtyler has joined the channel

[2018-04-04 05:59:55] hotelzululima : @hotelzululima has joined the channel

[2018-04-29 14:14:23] chipmangini : @chipmangini has joined the channel

[2018-05-02 21:59:36] chipmangini : Is anybody home??

[2018-05-11 07:57:01] cisse : @cisse has joined the channel

[2018-05-19 11:25:22] mr.vibez : @mr.vibez has joined the channel

[2018-05-19 17:56:22] sharph30 : @sharph30 has joined the channel

[2018-05-20 08:40:56] trollspeed : @trollspeed has joined the channel

[2018-05-25 17:51:17] windshearfl : @windshearfl has joined the channel

[2018-05-29 06:51:05] sandwings247 : @sandwings247 has joined the channel

[2018-06-01 14:33:03] eseven : @miliu00 has joined the channel

[2018-06-01 20:49:09] chipmangini : NLD website having problems for a while...

[2018-06-02 14:46:10] wculmer55 : @wculmer55 has joined the channel

[2018-06-03 13:15:02] pingspike : @rich has joined the channel

[2018-06-09 14:58:24] gsfesz : @gsfesz has joined the channel

[2018-06-09 23:11:27] freddyk_1234 : @freddyk_1234 has joined the channel

[2018-06-10 20:34:14] hotelzululima : !wiki

[2018-06-13 18:36:23] fredz : @fredz has joined the channel

[2018-06-15 06:45:41] mldma : @mldma has joined the channel

[2018-06-15 12:14:51] tom4711 : @tom4711 has joined the channel

[2018-06-17 17:22:40] coreylista : @coreylista has joined the channel

[2018-06-20 20:53:02] chipmangini : I just used NLD after not using it for awhile (cus it's so good!) and it "couldn't identify my firmware, please upload" . Anyhow, I emailed it, but here it is a little sooner:

[2018-06-20 20:53:48] chipmangini : {"DEVICE_MODEL":"wm331","MODULES":[{"MODULE":"Camera4K","FIRMWARE":"1.5.1577"},{"MODULE":"Camera_Len","FIRMWARE":"0.9.185"},{"MODULE":"FC_Loader","FIRMWARE":"34.4.0.17"},{"MODULE":"FC","FIRMWARE":"3.2.35.5"},{"MODULE":"Gimbal303","FIRMWARE":"1.50.13.1"},{"MODULE":"Gimbal5223_1","FIRMWARE":"1.4.5.0"},{"MODULE":"Gimbal5223_2","FIRMWARE":"1.4.5.0"},{"MODULE":"1860","FIRMWARE":"1.1.4.44"},{"MODULE":"2100","FIRMWARE":"1.0.1.6"},{"MODULE":"CPLD","FIRMWARE":"0.0.0.7"},{"MODULE":"UltrasonicM0","FIRMWARE":"0.0.0.5"},{"MODULE":"DJI_Vision","FIRMWARE":"1.1.2.5"},{"MODULE":"OFDM_103","FIRMWARE":"1.6.0.0"},{"MODULE":"Battery0","FIRMWARE":"2.0.18.22"},{"MODULE":"ESC0","FIRMWARE":"1.8.0.7"},{"MODULE":"ESC1","FIRMWARE":"1.8.0.7"},{"MODULE":"ESC2","FIRMWARE":"1.8.0.7"},{"MODULE":"ESC3","FIRMWARE":"1.8.0.7"}]}

[2018-06-22 12:01:03] edisonbattery : @edisonbattery has joined the channel

[2018-07-12 05:13:56] hotelzululima : hmm regarding NLD 1.7.0.3.. now have a dead MP on .700.. was trying to reflash when got DUMLDORE not responding messages with an offer to terminate or debug.. chose debug.. no response 20 mins restarted nld app no joy all greyed out.. restarted dji assistant.. restarted NLD again.. all greyed out.. restarted vm assiostant and NLD all greyed out(no chance to restart the reflash).. also infopanel has no serial, firmware version etc.. drone is flashing yellow rapidly..

[2018-07-12 05:14:38] hotelzululima : repowered MP.. again restarted VM etc.. NLD options still greyed out.. I am dead in the water and left a message for NLD support

[2018-07-12 05:15:00] hotelzululima : dji care ONLY 1 year?? I am screwed!!

[2018-07-12 05:15:55] hotelzululima : (still have a spare core board to hopefully bypass this shit headed for the wiki next before that)..

[2018-07-12 05:52:32] hotelzululima : and after enough restarts everything hunky dory again.. bunch of panic for nothing..

[2018-07-12 11:29:21] aciid : scary story :open_mouth:

[2018-07-12 16:40:29] hotelzululima : its caused by routing drone IO via DJI assistant I feel..lack of error handling provided in that scenario by the DJI product

[2018-07-12 17:07:46] hotelzululima : @judah_lucifer so are you running nld in a VM or native? which version of windows and have tyoutagged in @jezzab to this issue or filed a support ticket in nld?

[2018-07-12 17:08:41] judah_lucifer : @judah_lucifer has joined the channel

[2018-07-12 17:09:07] hotelzululima : @judah_lucifer so are you running nld in a VM or native? which version of windows and have tyoutagged in @jezzab to this issue or filed a support ticket in nld?

[2018-07-12 17:10:52] hotelzululima : whoops.. wrong person we need @coldflake or @quad808

[2018-07-12 17:10:58] coldflake : @coldflake has joined the channel

[2018-07-12 17:10:58] quad808 : @quad808 has joined the channel

[2018-07-12 17:14:21] hotelzululima : I just went through it with NLD(win 8.x in a vmw fusion VM) and @judah_lucifer is currently hitting it(DUMLDORE timeouts(mine was DUMLDORE not responding)) trying to get some particulars from him, mine after enough restarts eventually seemed to finish and left me in a working state

[2018-07-12 17:16:05] hotelzululima : btw I think understand why its happening ie IO to drone via DJI assistant and a lack of error reporting inherent in that approach..

[2018-07-12 17:18:32] quad808 : One thing to always remember, always...ALWAYS when flashing....if you think it's stuck, or not sure....just leave everything alone, turn on the RC and try and connect to the drone. If you can connect, it ain't flashing, no matter what the software says. The software is usually only monitoring at that point. All the flashing is done by the drone. Do not every turn off the drone if the RC can't connect and you were trying to flash. Brick city.

[2018-07-12 17:20:36] hotelzululima : ah.. forgot its NOT a synchronous update.. its async of course.. and the VMware fusion environment is pushing timings way off which causes the DUMLDORE failures… while the drone is happily updating itself after the dowload finihes to the drone..

[2018-07-12 17:20:44] hotelzululima : yep

[2018-07-12 17:21:29] quad808 : when everyone goes all VM, or parallels, and not straight windows...problems happen

[2018-07-12 17:21:35] hotelzululima : I left it powered on for the next 30 mins is what saved my ass .. will remember the rc connect next time

[2018-07-12 17:21:38] hotelzululima : yep

[2018-07-12 17:22:08] quad808 : Good thing you are ok...whats up with @judah_lucifer? no response

[2018-07-12 17:22:40] hotelzululima : dont know I invited him here from android_apk_patching.. but no response..

[2018-07-12 17:23:13] quad808 : I am not going to chase people down...if you see him, tell him to open a ticket on NLD, and I can look for it

[2018-07-12 17:23:17] hotelzululima : heh heh.. have a spare rooted core board that was gonna be swapped in it it hadnt fixed itseld

[2018-07-12 17:23:27] hotelzululima : I already asked him that

[2018-07-12 17:23:36] quad808 : LOL...at least you were prepared for the worst!

[2018-07-12 17:24:22] hotelzululima : @hostile had me acquire and root very early in the cycle.. so I didnt stumble around too much.. cant STAND not being rooted

[2018-07-12 17:24:25] quad808 : NLD is pretty good software....very, very few bricks that I have ever seen. Most of the time it's the crapo DJI flashing that fails

[2018-07-12 17:24:50] hotelzululima : NLD is dead fucking easy

[2018-07-12 17:25:11] hotelzululima : if only didnt require assistant for some functionality

[2018-07-12 17:25:41] quad808 : This new version of NLD is finding out all kinds of bad flashes that happen...it checks all modules against what it supposed to be flashed stock for that version.

[2018-07-12 17:26:04] quad808 : assistant will be going away soon...yah!

[2018-07-12 17:26:10] hotelzululima : one of the few reasons I keep a win8 vm around besides IDA

[2018-07-12 17:26:20] hotelzululima : is NLD

[2018-07-12 17:26:26] quad808 : Glad you are working bro!

[2018-07-12 17:26:39] hotelzululima : thanx so much

[2018-07-12 17:27:06] hotelzululima : was just trying to get our absent friend up to speed but he seems MIA

[2018-07-12 23:30:47] judah_lucifer : Hi guys, I was using NLD to upgrade Mavic to 0300 form 0200. It stuck for a while. Anyway, I used DUMBLdore stand alone and made it, thanks

[2018-07-12 23:31:12] judah_lucifer : May I ask if 2.5 in 0.5W config work with 4.1.22 now?

[2018-07-12 23:39:45] aciid : @judah_lucifer as I understand app mods are clientside and should work, you mean V01.04.0200? also be sure to upgrade your RC to that version aswell

[2018-07-12 23:40:54] judah_lucifer : thanks, I will try

[2018-07-13 02:53:56] judah_lucifer : hi guys, for the disable max altitude, when I try to set 1000 in DJI go app, it still show 500. Is that normal?

[2018-07-13 03:03:06] quad808 : yep, if it's not unlocked

[2018-07-13 03:04:27] quad808 : and ........ If you did unlock it, thats all you can set...the craft ignores it.

[2018-07-13 03:31:27] judah_lucifer : I see, thanks

[2018-07-13 09:49:55] mefisto : @quad808 By unlock do you mean modifications within app, or flyc firmware? Is there another restriction beyond the flyc_param array in app and in fw?

[2018-07-13 17:33:54] quad808 : I meant parameter unlock @mefisto...#Height disable g_config_flying_limit_height_limit_enabled = 2 (1) g_config_flying_limit_limit_height_abs_without_gps = 3000 (30) g_config_flying_limit_limit_height_abs = 3000 (50) g_config_flying_limit_limit_height_rel = 3000 (5)

[2018-07-17 03:24:23] ben_lin : nld is down again？

[2018-07-17 03:24:30] ben_lin : @coldflake

[2018-07-17 03:24:44] ben_lin : also is p4p v2.0 supported？

[2018-07-17 03:25:15] ben_lin : nvm

[2018-07-17 03:25:23] ben_lin : my browser fked me

[2018-07-17 07:13:30] mefisto : @quad808 I see - FW or mobile app modifications are not needed, the only thing required is to set new values of a few parameters.

[2018-07-17 15:05:16] judah_lucifer : hi guys, I have a kind of strange question if you don't mind: If I lost my Mavic and I bought a new one, I will have to buy another key for nld?

[2018-07-17 15:53:21] flyingkite : What's new in the latest 1.7.0.4? I see no release notes. Just wondering.

[2018-07-17 16:43:11] wculmer55 : Yes you need a separate key for each drone

[2018-07-17 16:47:05] wculmer55 : I have a key for each of my drones there cheap.

[2018-07-17 16:59:29] coldflake : Hello guys, sorry for the wait, I have been moving between houses, what a nightmare

[2018-07-17 17:06:52] mathieu.peyrega : Late on the thread... Beside the "parameter like" limit fox max height in app which is also at fw level. The app have a few hard-coded limits for other stuff like special flight modes (wayoints etc). Those limits include speed, height, path length etc.. (Those are also in fw for most)

[2018-07-17 17:25:30] quad808 : 1.7.0.4 bug fixes clean up. Didn't warrant any more info @flyingkite

[2018-07-17 17:32:38] mathieu.peyrega : no changes on the app

[2018-07-17 19:59:07] mefisto : Ok, this is more like what I expected. Thanks!

[2018-07-17 20:00:41] mathieu.peyrega : there is one fw param I could not find is the max vertical spped (down). Seems limited to -10 m/s in "regular mode" and for those interested... the terminal velocity after CSC is -18 m/s :slightly_smiling_face:

[2018-07-17 20:01:13] mathieu.peyrega : (with Spark)

[2018-07-17 20:04:23] mathieu.peyrega : in go4, the only one I believe have an effect is the max "max height" i.e. the max height range on the input box where you can set the max height to use for the drone

[2018-07-17 20:04:40] mathieu.peyrega : but the FC also check the sent value, so you must unlock app & FC

[2018-07-17 20:45:05] flyingkite : Thanks @quad808

[2018-07-17 22:49:54] mefisto : Yes, same with Ph3 - limit must be removed in both the app and the FC firmware; looks like there isn't much difference in how this woks across platforms.

[2018-07-18 09:20:44] judah_lucifer : hi guys, is nld website down? I cannot access :disappointed:

[2018-07-18 09:22:45] aciid : probably maintenance

[2018-07-18 09:29:33] judah_lucifer : thanks

[2018-07-18 13:24:16] judah_lucifer : Hi guys, Is it normal that when I go into the 3 dash on the top right corner of DJI Go 4 nld. It shows device Phantom4 while my bird is Mavic Pro?

[2018-07-18 14:28:50] judah_lucifer : Hi guys, does this mean complete?

[2018-07-18 14:29:17] judah_lucifer : it said device will reboot 3 times but it does not reboot

[2018-07-18 16:01:35] fredz : Can NLD be used to downgrade as well?

[2018-07-18 16:01:43] fredz : or is that Dumldore's task?

[2018-07-18 16:05:53] fredz : and I do need 4.1.3 on iOS, right?

[2018-07-18 16:33:45] fredz : Also - where can I find NLD Go apk or patcher?

[2018-07-18 16:44:40] mathieu.peyrega : [www.nolimitdronez.com](http://www.nolimitdronez.com)

[2018-07-18 16:54:18] fredz : odd - I downgraded my drone to 01.03.0700 using dumldore (no errors) and NLD still says I have 1.04.0000

[2018-07-18 16:55:00] fredz : I'll try again using the built-in dumldore in NLD now

[2018-07-18 16:57:21] fredz : I used AC & RC package in Dumldore on both

[2018-07-18 17:16:24] quad808 : Guys....Please read the site, check out every page before asking questions about NLD.

[2018-07-18 17:17:11] quad808 : @judah_lucifer When you apply the NFZ patch, it will disconnect and reconnect, which is a "soft reboot". Once that is done, shut it down and away you go.

[2018-07-18 17:46:27] fredz : @quad808 How come NLD would see my bird as 01.04.0000 while I previously performed a succesful downgrade using DUMLDore manually?

[2018-07-18 18:32:59] fredz : @fredz shared a file: [image.png](https://dji-rev.slack.com/files/U6179MS6R/FBSLLTH5J/image.png)

[2018-07-18 18:33:29] fredz : I tried to downgrade to 01.03.0700 from 01.04.0000 ; it stops at 28%, multiple times, and then won't recognize my firmware anymore, see the modules above

[2018-07-18 18:33:45] fredz : any one know how to fix this? I tried the fixed IP address, but that doesn't solve it

[2018-07-18 18:33:57] fredz : Dumldore stops at 28%, then restarts, then says it's done

[2018-07-18 18:34:03] fredz : NLD stops at 82%, then crashes

[2018-07-18 18:34:17] fredz : the drone still works

[2018-07-18 18:36:58] aciid : @fredz Installing firmwares from NLD has not worked for me for weeks. I use dumldore now to manage firmware installs and dankdronedownloader

[2018-07-18 18:38:50] fredz : @aciid yeah me too but that doesn’t seem to work well either now. Do these module versions look ok?

[2018-07-18 18:39:19] aciid : I don't think module versions follow firmware version numbering if that is what you mean

[2018-07-18 18:39:25] aciid : they have their own versions

[2018-07-18 18:46:25] fredz : yeah @aciid but something must be wrong there as the FW version is now not recognized by DJI Assistant or DUMLdore or NLD...

[2018-07-18 18:46:32] fredz : and I would like to solve it, but I don't know how...

[2018-07-18 18:46:58] aciid : mine is not recognized by NLD anymore since I patched my firmware

[2018-07-18 18:47:15] aciid : if you want to I can tell you how you can upgrade modules one by one

[2018-07-18 18:47:15] fredz : hmmm how can you easily check the bird's version? The patched APK shows no versions

[2018-07-18 18:47:43] fredz : I just want to verify somehow if my bird is now at 01.03.0700 or not...

[2018-07-18 18:48:30] aciid : I think the upgrade log contains version information

[2018-07-18 18:48:36] aciid : i cannot remember which file would have to check

[2018-07-18 18:48:56] aciid : adb to bird that is

[2018-07-18 18:49:09] fredz : and then?

[2018-07-18 18:49:17] aciid : /upgrade folder

[2018-07-18 18:49:39] fredz : those are the logs DUMLdore pulls in if you hit that button I guess

[2018-07-18 18:49:47] fredz : Pull Upgrade Logs

[2018-07-18 18:49:59] aciid : yeah

[2018-07-18 18:50:23] fredz : let me see

[2018-07-18 18:50:33] aciid : or this /data/dji/log/upgrade00.log

[2018-07-18 18:50:51] fredz : yeah indeed

[2018-07-18 18:50:52] fredz : that's the one

[2018-07-18 18:52:11] fredz : so where exactly in that file?

[2018-07-18 18:52:25] aciid : thats the path

[2018-07-18 18:52:39] aciid : in /data/dji/log folder

[2018-07-18 18:53:09] fredz : no I have the upgrade00.log file open

[2018-07-18 18:53:10] fredz : that's what I mean

[2018-07-18 18:53:16] fredz : looking through it...

[2018-07-18 18:53:22] aciid : grep sys_check_version

[2018-07-18 18:55:00] fredz : it seems it's trying to update ESC from 0.0.0.0 to 1.9.something but fails

[2018-07-18 18:55:22] aciid : all your modules physically ok?

[2018-07-18 18:55:32] fredz : Will try now :slightly_smiling_face:

[2018-07-18 18:55:54] fredz : maybe it flies just fine

[2018-07-18 18:59:24] fredz : haha

[2018-07-18 18:59:27] fredz : I changed a value in NLD

[2018-07-18 18:59:34] fredz : and now it recognizes it as 01.03.0700

[2018-07-18 18:59:45] aciid : lol wut

[2018-07-18 19:00:57] fredz : ah no, it doesn't, sorry

[2018-07-18 19:01:07] fredz : still says unknown

[2018-07-18 19:07:20] fredz : Ok the problem is the ESC firmware 0.0.0.0

[2018-07-18 19:07:24] fredz : It won’t fly

[2018-07-18 19:07:39] fredz : How can I update it

[2018-07-18 19:07:54] aciid : you can update per module with Assistant

[2018-07-18 19:08:00] aciid : which version do you have of assistant

[2018-07-18 19:08:05] fredz : 1.1.2

[2018-07-18 19:08:12] aciid : great

[2018-07-18 19:08:19] fredz : But assistant gives an unknown firmware error

[2018-07-18 19:08:22] aciid : its no problem

[2018-07-18 19:08:35] aciid : ill send this file for you that unlocks the options

[2018-07-18 19:08:41] aciid : this is no "debug" trick

[2018-07-18 19:08:41] fredz : Cool

[2018-07-18 19:09:07] fredz : How do I know what ESC firmware I need for the Mavic Pro Platinum with 01.03.0700?

[2018-07-18 19:09:10] aciid : oh that shit is 140mb

[2018-07-18 19:09:14] aciid : i have to upload it somehwere

[2018-07-18 19:09:23] fredz : Wetransfer?

[2018-07-18 19:09:28] aciid : using dropbox

[2018-07-18 19:09:31] aciid : uploading

[2018-07-18 19:09:33] fredz : Ok

[2018-07-18 19:10:39] fredz : It Should work according to NLD...

[2018-07-18 19:11:03] aciid : ok well then just dankdonedownload 01.03.0700 and unpack it to a folder

[2018-07-18 19:11:23] fredz : Ok

[2018-07-18 19:11:31] aciid : change .bin to .zip

[2018-07-18 19:12:47] fredz : Maybe it needs ESC fw from 01.04.0000?

[2018-07-18 19:12:54] fredz : Could I try that?

[2018-07-18 19:13:24] aciid : according to wiki you can combine different firmwares modules so it should be possible

[2018-07-18 19:13:38] fredz : I can’t be the first trying to get above 500m with a MPP

[2018-07-18 19:13:43] aciid : firmwares share common imports and compabiliteies

[2018-07-18 19:13:45] aciid : uhhh

[2018-07-18 19:14:06] aciid : if this is the only reason you are in that ancient firmware then I think you just need to do more research

[2018-07-18 19:14:32] aciid : doesnt birdmap show that more modern firmwares are nutrient too

[2018-07-18 19:14:51] aciid : you should be able to just click unlock on other firmwares too

[2018-07-18 19:14:55] aciid : for the height

[2018-07-18 19:15:34] fredz : well I'd like NFZ as well...

[2018-07-18 19:15:51] fredz : for +500 .800 is the latest anyway

[2018-07-18 19:15:54] fredz : so not much difference

[2018-07-18 19:15:55] aciid : geezus this firmware thing is retarded

[2018-07-18 19:16:03] aciid : fuck dji lol

[2018-07-18 19:16:35] fredz : did you upload something?

[2018-07-18 19:16:40] fredz : I change .bin to .zip but it won't open

[2018-07-18 19:18:26] quad808 : ok, i will jump in here

[2018-07-18 19:20:24] quad808 : The way NLD checks firmware is module, by module firmware version against what the stock firmware is "supposed" to be. We are finding out that DJI's firmware flashing is quite frankly, SHIT. Modules are not being flashed correctly to the right version, but you won't know that by DJI Assistant. @fredz...you need to flash 01.03.0700 again. Use whatever works...DD or NLD

[2018-07-18 19:20:35] aciid : @fredz uplaoding the assistants required mod.

[2018-07-18 19:20:42] aciid : what was that extension was it .tar then

[2018-07-18 19:20:46] aciid : try .tar

[2018-07-18 19:21:13] quad808 : The reason NLD comes up with not reading, or not recognized firmware is because one or more modules didn't flash correctly.

[2018-07-18 19:21:23] aciid : <https://www.dropbox.com/s/3mf78nc8pvi4sw9/app.asar?dl=1>

[2018-07-18 19:21:29] fredz : @quad808 I tried 5 times now with DD and 5 with NLD on multiple computers

[2018-07-18 19:21:32] quad808 : Before you do anything...

[2018-07-18 19:21:56] quad808 : What do you want? 01.04.0300 with mixed firmware of FC on 01.03.0700?

[2018-07-18 19:21:58] aciid : that file goes to here C:\Program Files (x86)\DJI Product\DJI Assistant 2\AppFiles

[2018-07-18 19:22:03] fredz : DD goes from 28 to finish in one second and NLD stops at 82%

[2018-07-18 19:22:07] aciid : but yes listen to @quad808

[2018-07-18 19:22:40] fredz : Thanks @quad808

[2018-07-18 19:23:16] fredz : All I want is NFZ and 500+ on my MPP with stock sd card and stock was 01.04.0000

[2018-07-18 19:23:25] mathieu.peyrega : I have had something similar on one PC were I used to install some drivers for android phones rooting...

[2018-07-18 19:23:29] fredz : So I thought it was best to downgrade to 01.03.0700

[2018-07-18 19:23:44] mathieu.peyrega : by chance, did you install this kind of stuff on the computers you are using ?

[2018-07-18 19:24:04] mathieu.peyrega : (I mean the % stopping during transfer etc.)

[2018-07-18 19:24:08] fredz : No the second pc is a new install...

[2018-07-18 19:24:09] quad808 : ok, easy. 1st...some questions then solution. Does Assistant V1.2.4 detect the drone? And what firmware is it on right now?

[2018-07-18 19:24:41] fredz : Well now I don’t know see here

[2018-07-18 19:24:47] fredz : @fredz uploaded a file: [Image from iOS](https://dji-rev.slack.com/files/U6179MS6R/FBU0Q3B3R/image_from_ios.png)

[2018-07-18 19:25:02] fredz : Can you see that screenshot @quad808

[2018-07-18 19:25:05] quad808 : I didn't ask that

[2018-07-18 19:25:24] quad808 : <https://dl.djicdn.com/downloads/dji_assistant/20180516/DJI+Assistant+2+1.2.4.zip> download, install, connect up the Mavic tell me if it detecs it

[2018-07-18 19:25:26] fredz : I can’t see where to see the version

[2018-07-18 19:25:29] fredz : Ok

[2018-07-18 19:25:49] quad808 : did you use this Assistant before now?

[2018-07-18 19:26:06] quad808 : This is not the one with NLD, that one is V1.1.2

[2018-07-18 19:26:27] fredz : 1.1.2 yes - 1.2.4 I didn't installing it now

[2018-07-18 19:28:35] fredz : 1.2.4 sees the bird

[2018-07-18 19:28:46] quad808 : Here is what you are going to do. Install it. Charge your battery. Full, so you don't worry about it. Upgrade firmware to 01.04.0300 using DJI Assistant V1.2.4. 1st flash should take 15 min., 2nd flash will take 3. Yes. flash it twice. ALWAYS, ALWAYS flash twice. Then you will use DUMLdore V3...you have that right? The latest one? <https://github.com/jezzab/DUMLdore/archive/master.zip> and you will flash this firmware I am going to upload.

[2018-07-18 19:29:32] fredz : @fredz uploaded a file: [image.png](https://dji-rev.slack.com/files/U6179MS6R/FBT3T0DBP/image.png)

[2018-07-18 19:29:49] fredz : it sees it as 01.03.0700-

[2018-07-18 19:30:17] fredz : shouldn't I try 01.03.1000 first with 1.2.4?

[2018-07-18 19:30:33] quad808 : After the second flash using Assistant, you need to close assistant, shut down the drone, then connect everything back up and check the version in Assistant. Make sure there is no (-) after the firmware. Whenever you see the (-) that means your firmware is basically fucked, and not correct.

[2018-07-18 19:31:09] fredz : right, it's fucked :slightly_smiling_face:

[2018-07-18 19:31:11] quad808 : My patience is wearing out. Do you want to fix this or not? I can stop here and you can do whatever you want to do.

[2018-07-18 19:31:18] fredz : sorry

[2018-07-18 19:31:23] fredz : I shall listen and shut up

[2018-07-18 19:31:38] quad808 : ok, there is a reason I tell you to do what I tell you to do.

[2018-07-18 19:31:41] fredz : ok

[2018-07-18 19:31:56] quad808 : You want all the parameter changes possible on 01.03.0700, right?

[2018-07-18 19:32:18] quad808 : say yes.

[2018-07-18 19:32:22] fredz : yes

[2018-07-18 19:32:57] quad808 : Ok, you will have that, but be on 01.04.0300, with FC firmware 01.03.0700. You will lose precision landing.

[2018-07-18 19:33:06] quad808 : You ok with that?

[2018-07-18 19:33:07] fredz : good

[2018-07-18 19:33:30] quad808 : ok, upgrade it to 01.04.0300 and flash it twice.

[2018-07-18 19:33:57] quad808 : Then flash it with this firmware using DUMLdore. I will upload it.

[2018-07-18 19:34:21] fredz : OK

[2018-07-18 19:34:23] fredz : thanks

[2018-07-18 19:34:31] quad808 : @quad808 uploaded a file: [dji_system700_ONLY 305-306.tar](https://dji-rev.slack.com/files/U65MX3DFZ/FBSCW1W49/dji_system700_only_305-306.tar)

[2018-07-18 19:34:52] quad808 : do not rename it to .bin

[2018-07-18 19:35:30] fredz : good

[2018-07-18 19:36:04] quad808 : report back when you get to 01.04.0300, and you have flashed it twice, disconnected, restarted, connected with RC and everything looks good.

[2018-07-18 19:39:19] fredz : Ok

[2018-07-18 19:40:47] quad808 : here is what you are doing, and the reason this works well. You are upgrading all modules...firmware to 01.04.0300, then you are checking it to make sure all firmware took correctly, using DJI's own tools. Not that they are any better or worse than DUMLdore (which I love...thanks jezzab). If your drone refuses to upgrade using Assistant, that might indicate a problem with the drone itself, and you then can complain to DJI for warranty. You are using their tools. Once you get to 01.04.0300, you then flash only the flight controller module of 01.03.0700 to 01.04.0300, leaving all the rest on the .0300 firmware versions. This is a Platinum, so you need the updated ESC firmware, and now have it on 01.04.0300. You installed an internal memory card, right? You will need that.

[2018-07-18 19:45:26] fredz : My platinum had an SD card inside - I just opened it and checked

[2018-07-18 19:45:34] quad808 : Excellent!

[2018-07-18 19:45:41] fredz : It was one of the very first platinums

[2018-07-18 19:46:53] quad808 : Now, once we are done...NLD may or may not recognize the firmware correctly. I am not sure if coldflake added this combination to the database, but you should still be able to change parameters using NLD.

[2018-07-18 19:47:33] fredz : ok...

[2018-07-18 19:47:53] fredz : can you send me the file you were talking about? I might have to try that in the morning

[2018-07-18 19:47:53] quad808 : If not, there is always a work around

[2018-07-18 19:48:05] quad808 : I uploaded it here, scroll up

[2018-07-18 19:48:14] fredz : the tar file right

[2018-07-18 19:48:19] fredz : what do I have to do with that

[2018-07-18 19:48:19] quad808 : yes

[2018-07-18 19:49:27] quad808 : Did you read what I told you to do. Here is what you are going to do. Install it. Charge your battery. Full, so you don't worry about it. Upgrade firmware to 01.04.0300 using DJI Assistant V1.2.4. 1st flash should take 15 min., 2nd flash will take 3. Yes. flash it twice. ALWAYS, ALWAYS flash twice. Then you will use DUMLdore V3...you have that right? The latest one? <https://github.com/jezzab/DUMLdore/archive/master.zip> and you will flash this firmware I am going to upload.

[2018-07-18 19:49:49] quad808 : Save the firmware and flash it after getting to 01.04.0300.

[2018-07-18 19:49:55] fredz : Oh ok the tar in dumldore

[2018-07-18 19:49:58] quad808 : using DD

[2018-07-18 19:50:00] quad808 : yes

[2018-07-18 19:50:10] fredz : That’s all? :)

[2018-07-18 19:51:30] quad808 : after flashing, and it is 100%, flash it again. Then once you are 100% sure you are done flashing...(connect to it with your RC...if it connects, it's done) Check it by doing a test flight to see if everything works good. Then go into NLD and do mods.

[2018-07-18 19:56:00] fredz : Ok I’ll report back tomorrow

[2018-07-18 19:56:36] fredz : If I want 500+ but don’t need nfz is there a way to keep precision?

[2018-07-18 19:57:00] fredz : I fly a lot in mountains so 500+ is required

[2018-07-18 20:01:46] fredz : Thanks @quad808

[2018-07-18 20:34:06] quad808 : If you are using mixed firmware, no way that we have found that you can keep precision landing. It's not that the option isn't there...it is, but when it comes back, it goes into regular landing mode and doesn't make the turn away from you before descending. It still comes within a meter or closer of take off point.

[2018-07-19 05:09:23] fredz : Thanks @quad808 . What is the reason you prefer to use 01.04.0300 instead of a lower one available in the 1.2.4 assistant, like 01.04.0000 or 01.03.1000 before downgrading the FC?

[2018-07-19 06:44:10] paulpaws : no reason really. last version that can be downgradable and rootable (may as well get the lastest one that can exploitable, ie nothing above 01.04.0300)

[2018-07-19 06:47:04] paulpaws :

[2018-07-19 06:47:04] paulpaws : @quad808 didnt know you can mix mod by going to version you wanted ie 1.4.0300 and then installing the flight controller module of 01.03.0700 only via the <https://dji-rev.slack.com/files/U65MX3DFZ/FBSCW1W49/dji_system700_only_305-306.tar>

[2018-07-19 06:50:17] fredz : upgrading now to 01.04.0300 as @quad808 said and then I'll try the tarball

[2018-07-19 06:50:47] paulpaws : @quad808 i was always under the impress you have to downgrade to dji_system700 and then remove 305 and 306 modules from the full bin file of the whatever version you wanted to go to

[2018-07-19 06:52:07] paulpaws : hi Fredz, you will not have problem its should work

[2018-07-19 06:55:54] judah_lucifer : Even though it does not relate to my matter, but I am curious about your problem: I thought the latest firmware to do the nfz and no max altitude is 01.04.0300. And nld support all the rest, why should we downgrade to 700 and remove 305, 306?

[2018-07-19 07:02:30] fredz : that's not right, look here

[2018-07-19 07:02:33] fredz : <https://nolimitdronez.com/birdmap>

[2018-07-19 07:02:41] fredz : latest update that can do 500+ alt is 01.03.0700

[2018-07-19 07:02:54] fredz : sorry 01.03.0800

[2018-07-19 07:02:58] paulpaws : yes correct

[2018-07-19 07:03:07] fredz : and latest update that can do 500+ and the "old" method of no NFZ is 01.03.0700

[2018-07-19 07:03:18] paulpaws : what why you use the tar file

[2018-07-19 07:03:28] fredz : should I also update the RC to 01.04.0300 or can I leave it on 01.03.0600 ?

[2018-07-19 07:03:44] paulpaws : that quad808 uploaded that is the modules from .700

[2018-07-19 07:04:07] paulpaws : RC you dont need to update

[2018-07-19 07:04:17] paulpaws : you can leave as is

[2018-07-19 07:04:29] fredz : ha, why not?

[2018-07-19 07:04:49] paulpaws : makes no difference as far as i know

[2018-07-19 07:05:09] paulpaws : and that what the guys say on here

[2018-07-19 07:05:34] fredz : hmmm ok, so my RC is 01.03.0600 it seems. My bird will be 01.04.0300 with FC 01.03.0700

[2018-07-19 07:05:36] fredz : interesting :slightly_smiling_face:

[2018-07-19 07:05:50] paulpaws : yes

[2018-07-19 07:06:38] paulpaws : if you have the fc 01.03.700 correct then you can change parimeters ang get 500+

[2018-07-19 07:07:28] paulpaws : you app will show you AC on 01.04.300 but your FC will be .700

[2018-07-19 07:07:41] paulpaws : RC it doenst matter

[2018-07-19 07:07:59] fredz : yeah @quad808 taught me that. Upgrade to 01.04.0300 was succesfull, now I'll do the refresh as quad808 told me and then I'll do the tarball

[2018-07-19 07:08:11] paulpaws : yes

[2018-07-19 07:08:41] paulpaws : did you buy nld?

[2018-07-19 07:08:48] fredz : yes

[2018-07-19 07:09:24] paulpaws : okay cool so that will let you change to 500+ and other things

[2018-07-19 07:09:48] paulpaws : i think it will remove nfz for you too and patch the go app too

[2018-07-19 07:10:41] paulpaws : i didnt try as i did all manual from the help the people on here

[2018-07-19 07:12:03] fredz : I fly a lot in the mountains so 500m limit really is annoying

[2018-07-19 07:12:23] fredz : even when I fly at 1000m from drone, then the absolute height from the mountain ridge or peak is only 25 meters :slightly_smiling_face:

[2018-07-19 07:12:48] paulpaws : from the base?

[2018-07-19 07:13:05] paulpaws : you know you can land and that resets the 500m

[2018-07-19 07:13:26] paulpaws : to new place as 0

[2018-07-19 07:13:55] fredz : yeah lol I know

[2018-07-19 07:13:57] fredz : but risky :slightly_smiling_face:

[2018-07-19 07:14:48] coldflake : Yes, quite anoying if it tips over in such a landing / reset maneuver lol

[2018-07-19 07:14:49] paulpaws : why? you can reset the rth on the app

[2018-07-19 07:15:10] paulpaws : yes true coldflake, LOL

[2018-07-19 07:15:44] paulpaws : @fredz send us some links i would love to see

[2018-07-19 07:29:01] fredz : @quad808 it seems to have worked; the bird flies and reports 01.03.0700- on DJI Assistant 1.2.4

[2018-07-19 07:29:25] fredz : @quad808 here are the modules now

[2018-07-19 07:29:28] fredz : <https://imgur.com/a/aC7i30s>

[2018-07-19 07:29:50] fredz : NLD doesn't recognize it though, so I chose compatibility mode to set the parameters

[2018-07-19 20:56:01] quad808 : Test and fly....report back. No errors on arming? No ESC errors etc? All should be GREAT!

[2018-07-19 20:56:42] aciid : Djirev community saves one bird again

[2018-07-19 20:56:54] aciid : Thanks @quad808 you are a champ

[2018-07-19 20:58:59] quad808 : The reason I renamed the .bin to .tar is so that DD would flash it.

[2018-07-19 23:42:44] paulpaws : thanks @quad808 didnt know you could do it that way around, nice to know, :slightly_smiling_face:

[2018-07-20 11:06:57] fredz : Thanks again @quad808 It works stellar

[2018-07-20 11:07:16] fredz : My RC is still on 01.03.0600 I see. Should I upgrade too?

[2018-07-20 16:55:21] quad808 : @fredz I think I replied via NLD, but yes, upgrade the remote to 01.04.0300, then leave it.

[2018-07-21 06:19:10] anydreamplay : @anydreamplay has joined the channel

[2018-07-21 06:19:10] xchwaw : @xchwaw has joined the channel

[2018-07-21 06:19:16] aciid : welcome

[2018-07-21 06:26:45] xchwaw : @aciid Thanks!:grin:

[2018-07-21 22:05:20] flyingkite : Question for the NLD folks.... I have a license to use NLD for my spark and have been using on my desktop pc. I will be get getting a new laptop soon to replace the pc and wanted to know if I will need to input the license again once I start using NLD on the new laptop.

[2018-07-21 22:07:19] quad808 : @flyingkite Nope, you can run NLD on multiple pcs with the same drone. NLD is tied to the serial number of the drone, not the PC...it gets checked back to our servers when you load up NLD.

[2018-07-22 03:42:53] flyingkite : Thanks @quad808

[2018-07-23 06:59:24] ben_lin : the nld go4 just exits itself upon opening

[2018-07-23 06:59:30] ben_lin : any solution？

[2018-07-23 17:11:46] quad808 : @ben_lin I would uninstall, make sure you delete cache then files, then search for leftover files/folders then install again...test

[2018-07-23 17:51:58] mathieu.peyrega : @ben_lin: there is an "expected" issuee on devices where the external storage is not under the /mnt/sdcard "absolute path". Thsi has been corrected almost everywhere in the code, but there is one place that I can think about were it is not : the DTM config file. If you check in it, the DTM tiles are pointing in /mnt/sdcard/DJI/srtm_data/ if your external storage is elsewhere than this, you may need to change it to actual location. Also, if this is the issue, the crash would occur at time you press "GO FLYING" not at immediate app start

[2018-07-23 17:52:11] mathieu.peyrega : if the crash occurs at immediate app start, then this is something else.

[2018-07-23 17:53:02] mathieu.peyrega : Your bug report contains little information to help us spotting the issue...For example, what is the phone / android version ?

[2018-07-24 08:01:42] ben_lin : i am using it on cs7.85

[2018-07-24 08:08:51] ben_lin : i tried all that but it would still crash

[2018-07-24 08:09:04] ben_lin : the crash occurs after the intial setup of the app

[2018-07-24 08:09:16] ben_lin : and everytime you open the app it just crashes

[2018-07-24 08:12:45] ben_lin : @mathieu.peyrega

[2018-07-24 08:13:04] ben_lin : also factory reset cs and re-rooted on cs

[2018-07-24 08:14:26] mathieu.peyrega : do you have google playstore installed ?

[2018-07-24 08:15:15] mathieu.peyrega : did you removed any previously installed patched go4 on the CS ?

[2018-07-24 08:15:55] ben_lin : no, after the factory reset i havent installed google services, but the crash was occuring before the reset when goolge is installed

[2018-07-24 08:16:00] ben_lin : i removed all previous go4

[2018-07-24 08:16:21] ben_lin : should i try installing google services

[2018-07-24 08:16:41] ben_lin : also i am getting the bug on newest fw where installed 3rd party apps icons are missing...

[2018-07-24 08:17:31] mathieu.peyrega : What's you cs fw version ? All Icons are missing or only NLD ? You applied the CS workaround for the "disappearing NLD app" ? can you uninstall the nld app, delete the /DJI/dji.pilot.pad & /DJI/og_settings & /DJI/og_logs directories and try reinstalling ?

[2018-07-24 08:18:04] mathieu.peyrega : I guess google playstore is needed for CS NLD but not sure

[2018-07-24 08:18:17] ben_lin : just nld, i applied all patch options in the nld desktop app

[2018-07-24 08:18:27] ben_lin : entire DJI folder was deleted

[2018-07-24 08:18:27] mathieu.peyrega : I only have a CS with playstore instaleld so cannot tell if it works without

[2018-07-24 08:18:49] ben_lin : i will try flashing the google services in there and see how it goes

[2018-07-24 08:18:56] ben_lin : on newest fw

[2018-07-24 08:19:08] mathieu.peyrega : when you say "factory" reset

[2018-07-24 08:19:20] mathieu.peyrega : si it factire reset from the menu r a full firmware reflash from sd card ?

[2018-07-24 08:19:31] mathieu.peyrega : you should do both : factory rest from menu settigns

[2018-07-24 08:19:38] ben_lin : did from menu

[2018-07-24 08:19:40] mathieu.peyrega : thne reflash firmware from SD car method

[2018-07-24 08:20:40] mathieu.peyrega : download the CS fw image here : <http://mydjiflight.dji.com/file/links/ZSB_pack_2660_20180525>

[2018-07-24 08:20:46] ben_lin : so i just finished installing the nld app and I cant even click the "open button"... dang it

[2018-07-24 08:21:08] mathieu.peyrega : extract the .bin to a sdcard (also put the zip on the sd card... dont remember which is needed)

[2018-07-24 08:21:19] ben_lin : and app icaon also does not show up

[2018-07-24 08:21:40] ben_lin : i dont think this app icon issue is related to the nld app tho

[2018-07-24 08:22:02] ben_lin : wasnt there a bug on this fw?

[2018-07-24 08:22:10] ben_lin : that app icons wont show up

[2018-07-24 08:23:26] mathieu.peyrega : let try from a clean state... 1. factory reset from menu 2. reflash full f from sd card (put the .zip and .bin to SD card in slot 1 and reboot CS, make sure you have a filled battery...)

[2018-07-24 08:23:35] mathieu.peyrega : 3. follow this tutorial

[2018-07-24 08:23:44] mathieu.peyrega : @mathieu.peyrega uploaded a file: [CS_Workaround.txt](https://dji-rev.slack.com/files/U84HERNVC/FBV35B63S/cs_workaround.txt)

[2018-07-24 08:24:02] ben_lin : k... dont have an SD card on hand, gonna go buy one and report back

[2018-07-24 08:24:12] mathieu.peyrega : mean microSD

[2018-07-24 08:24:34] ben_lin : ik

[2018-07-24 08:24:48] ben_lin : so yours is working right?

[2018-07-24 08:24:58] ben_lin : with all the AGL height and 32 channel stuff

[2018-07-24 08:26:32] mathieu.peyrega : yes, and with the exact same version of app as the NLD one

[2018-07-24 08:27:01] mathieu.peyrega : I haven't done anything new since the

[2018-07-24 08:27:48] ben_lin : k. DJI is real good at fucking with their users

[2018-07-24 08:28:38] ben_lin : should probably go get some popcorn and then do this..

[2018-07-25 06:17:44] mathieu.peyrega : @ben_lin : any news of your NLD & CS ?

[2018-07-25 06:22:17] ben_lin : working on it right now, just got the sd card in

[2018-07-25 06:22:44] mathieu.peyrega : slot 1 !

[2018-07-25 06:22:52] ben_lin : ik

[2018-07-25 06:23:05] ben_lin : slot 2 has never been plugged, unlike slot 1....

[2018-07-25 06:23:08] ben_lin : lul

[2018-07-25 06:25:17] ben_lin : noooo

[2018-07-25 06:25:25] ben_lin : it still crashes

[2018-07-25 06:27:17] mathieu.peyrega : you reflashed a fresh fw already ?

[2018-07-25 06:27:29] ben_lin : i did it this morning

[2018-07-25 06:27:38] ben_lin : complete sd card style

[2018-07-25 06:27:40] mathieu.peyrega : ok; can you provide the logcat ?

[2018-07-25 06:28:32] ben_lin : one sec

[2018-07-25 06:32:35] ben_lin : logcat is so damn long with so many errors..

[2018-07-25 06:42:16] ben_lin : is there a way to filter the logcat?

[2018-07-25 06:42:20] ben_lin : @mathieu.peyrega

[2018-07-25 06:43:28] mathieu.peyrega : grep

[2018-07-25 06:43:35] mathieu.peyrega : logcat -c

[2018-07-25 06:43:43] mathieu.peyrega : this will clear logcat

[2018-07-25 06:43:51] mathieu.peyrega : start your app (should crash)

[2018-07-25 06:43:59] mathieu.peyrega : logcat | grep dji

[2018-07-25 06:44:11] mathieu.peyrega : will filter lines containing "dji"

[2018-07-25 06:44:19] ben_lin : ok..

[2018-07-25 06:52:46] ben_lin : @ben_lin uploaded a file: [long ass snippet](https://dji-rev.slack.com/files/U8D3M7HML/FBVUVQ10R/long_ass_snippet.m)

[2018-07-25 06:57:28] mathieu.peyrega : You are using the regular device DJI GO

[2018-07-25 06:57:40] mathieu.peyrega : nld should offer 2 versions and you need to select the "CS" one

[2018-07-25 06:58:19] ben_lin : omfg

[2018-07-25 06:58:22] ben_lin : dude

[2018-07-25 06:58:26] ben_lin : i am so dumb

[2018-07-25 06:58:27] ben_lin : lmfao

[2018-07-25 06:58:54] ben_lin : thanks for helping, gonna pack a new one with the nld client right now

[2018-07-25 07:25:51] ben_lin : @mathieu.peyrega

[2018-07-25 07:25:55] ben_lin : so the app is working now

[2018-07-25 07:26:08] ben_lin : but i see now NLD can remove nfz on p4p newest fw

[2018-07-25 07:26:33] ben_lin : when did this update came out?

[2018-07-27 08:41:01] cs2000 : Few weeks ago @ben_lin

[2018-07-27 08:41:59] ben_lin : Is P4P 2.0 included?

[2018-07-27 08:42:21] ben_lin : So me and my friend tested the boost function

[2018-07-27 08:42:36] ben_lin : He has a mavic I had a p4p

[2018-07-27 08:42:47] ben_lin : Same location same direction same NLD app

[2018-07-27 08:43:07] ben_lin : In the middle of a densely populated city

[2018-07-27 08:43:58] ben_lin : Mavic went 3000m with absolutely 0 lag and flawless 1080p(didn’t test further)

[2018-07-27 08:44:23] cs2000 : Naa, we dont really have much/any support for the P4P V2

[2018-07-27 08:44:28] ben_lin : While P4P needs to constantly adjust antenna angle to avoid disconnect at 2500m

[2018-07-27 08:44:46] ben_lin : So the boost patch is probably Mavic-only

[2018-07-27 08:45:18] ben_lin : I thought 2.0 just changed the Image TX only?

[2018-07-27 08:45:23] ben_lin : Hmm

[2018-07-27 08:45:54] cs2000 : Yes, boost patch is for Mavic only, 32ch is for P4 only

[2018-07-27 08:46:32] cs2000 : set the channel topic: General NLD chatter. For support **Do Not Request it Here** use [support.nolimitdronez.com](http://support.nolimitdronez.com)

[2018-07-27 08:47:36] ben_lin : Why wouldn’t it work on P4P :(

[2018-07-27 08:47:58] aciid : different radios

[2018-07-27 08:48:32] ben_lin : So boost patch is Occusync-only?

[2018-07-27 08:49:09] aciid : I don't know specifically, but main reason is that they are different devices. The app to use the drones may be the same but they still have different features.

[2018-07-27 08:49:29] ben_lin : Aight…

[2018-07-29 16:17:00] 1313659 : yeah likely a new core board, so do what i said and we will get it sorted. <https://support.nolimitdronez.com> -Proof the drone is a repaired unit( just a screenshot of the email from DJI) , - The new drones serial number - Your NLD license key

[2018-07-29 16:17:07] 1313659 : I have been sending emails for several days. I have sent the required screenshots to the NLD. Still can't activate my mvpro.

[2018-07-29 16:23:55] aciid : its weekend dude

[2018-07-30 08:04:32] judah_lucifer : hi guys, can I use DUMLdore to downgrade Spark remote? It does not recognize I think

[2018-07-30 08:13:53] cs2000 : @1313659 chill out dude, as i told you via PM, only one guy can do the reset on yoour license key, and he is busy moving house, dont worry it will get done

[2018-07-30 08:40:35] 1313659 : I just want to take off now video with litchi, but I can't upload data to take off without deleting NFZ. Is there any other way to remove this NFZ

[2018-07-30 08:43:07] cs2000 : yes there is !wiki

[2018-07-31 00:55:55] 1313659 : V01.05.0600 firmware version of p4pro delete NFZ with NLD?

[2018-07-31 07:30:36] cs2000 : <https://nolimitdronez.com/birdmap>

[2018-07-31 08:55:03] lucaterz : in the new NLD 1.7.0.3 is fcc boost avaible on spark?thx

[2018-07-31 11:55:36] mathieu.peyrega : @info: no

[2018-07-31 14:49:15] judah_lucifer : i guys, I just used the mix firmware for mavic to bypass 500m llimit and nfz. However, when I go pass the limit height, the focus and some stuff cannot be control on the screen, is that normal?

[2018-07-31 16:50:23] judah_lucifer : Hi guys, can somebody please help. Why on the NLD website says that .700 for Mavic can do both nfz and 500+. But in the NLDapp, when I try to remove the nfz, it said not compatible? Thanks

[2018-07-31 18:46:19] quad808 : Because they are different. The NFZ patch is different than the NFZ check box. The patch is only for current firmware, up to 01.04.0300. Use the check box if you are on .0700. No idea what you are talking about focus not working. Nothing to do with altitude bypass.

[2018-07-31 22:38:08] chipmangini : @jezzab First of all, THANK YOU and all the OG for what you do. Epic!

[2018-07-31 22:39:44] chipmangini : @jezzab If you had a P4P how would you mod it?

[2018-07-31 22:39:50] jezzab : @jezzab has joined the channel

[2018-07-31 22:51:30] judah_lucifer : I see.so if i am on .700 just use the check box and i am good to go?

[2018-07-31 23:31:16] quad808 : yup.

[2018-07-31 23:31:24] quad808 : don't forget to save.

[2018-07-31 23:52:48] judah_lucifer : awesome, thanks a heap

[2018-08-01 15:39:37] kiril.miloshev : When we will have nld working with the new spark firmware ?

[2018-08-01 15:40:36] cs2000 : what doesnt work about it?

[2018-08-01 15:41:57] kiril.miloshev : I want to change sport mode speed, but like the otg improvement with the 1000 firmware

[2018-08-01 15:41:57] kiril.miloshev : The software does not recognise it

[2018-08-01 15:43:20] cs2000 : Pretty sure we can recognise the stock firmware. Likely you have some mixed module FW or a incomplete flash

[2018-08-01 15:43:34] kiril.miloshev : Nope

[2018-08-01 15:43:44] kiril.miloshev : Just the latest version

[2018-08-01 15:43:55] kiril.miloshev : It recognizes til .900

[2018-08-01 15:45:26] cs2000 : Hmm ok, well @coldflake has quite a few firmware definitions to add to the database, so its likely in there. He has been busy for the last 2 weeks with real life stuff

[2018-08-01 15:45:36] cs2000 : Think he's looking at those today/tonight

[2018-08-01 15:48:02] kiril.miloshev : Nice. Thank you :)

[2018-08-01 15:48:25] kiril.miloshev : Is it possible to lower the yaw speed sonit will pan smoother ?

[2018-08-01 15:48:38] kiril.miloshev : “So it”

[2018-08-01 15:54:38] cs2000 : err yes possibly, it will be a parameter burried away somewhere, cant help any more than that though as i dont know all the parameters :confused:

[2018-08-01 16:01:04] kiril.miloshev : It will be great mod for the little spark :) thank you and have a nice evening!

[2018-08-01 16:02:01] mathieu.peyrega : @kiril.miloshev: g_config.mode_sport_cfg.tors_exp_mid_point

[2018-08-01 16:02:26] mathieu.peyrega : lower the value to 0.2 or 0.3

[2018-08-01 16:03:35] mathieu.peyrega : actually will not lower the max yaw speed, but will reduce stick sensitivity at lower values so control at lower speeds is "easier"

[2018-08-01 16:07:48] kiril.miloshev : Thank you. I will try it

[2018-08-01 16:08:10] kiril.miloshev : This is for sport or normal mode?

[2018-08-01 16:08:39] cs2000 : g_config.mode_sport

[2018-08-01 16:10:36] mathieu.peyrega : you have a twin setting for normal mode

[2018-08-01 16:15:53] kiril.miloshev : Ok

[2018-08-01 16:15:58] kiril.miloshev : 10x

[2018-08-01 18:16:49] will042082 : Speaking of NLD, the air on the latest FW NLD doesn’t recognize the drone FW 99% of the time so the functionality isn’t provided and the other 1% I managed to get it to read the drone enough so that it would do compatibility mode and allow for the limited functionality that’s available for it.

[2018-08-01 18:17:53] will042082 : NLD kinda worthless on the AIR as it does nothing I can’t do in DJI Assistant but I looked at it as supporting you guys so didn’t have a problem with purchasing considering all the effort

[2018-08-01 18:28:48] fredz : Hey @quad808 MPP still flying stellar after your help. I submitted the combo a few weeks ago in the app, but it doesn’t seem to have been added to the database yet. Will that happen? <https://imgur.com/a/aC7i30s>

[2018-08-01 18:39:58] quad808 : Hi @fredz coldflake is working on it, hopefully today sometime.

[2018-08-01 18:52:13] fredz : That’s quick @quad808 :-)

[2018-08-01 20:31:59] chipmangini : @quad808 I have a P4P. If you had one, how would you mod it? I have a licence for NLD, and have used DUMLdore too. NLD has been complaining about my current firmware, similar to the picture posted above. Go back to V01.03.0509 using DUMLdore? Use the newest firmware, and remove /mix modules? What are our thoughts if you don't mind?

[2018-08-01 21:09:03] quad808 : Yep, I have never worked or flown a P4 - but should be fw 1.03.0509 and an early version of GO 4.1.3 or below if possible. All mods can be done, if I am not mistaken.

[2018-08-03 09:15:51] artu-ole :

[2018-08-03 09:16:09] artu-ole : Love such details when they come up :wink:

[2018-08-03 09:19:24] cs2000 : :joy:

[2018-08-03 09:22:56] cs2000 : @artu-ole how did you get that to appear? I dont see it in my NLD client if i hover over the button or whatever?

[2018-08-03 09:23:33] artu-ole : decompiler, been lurking in the code a little bit.

[2018-08-03 09:30:56] coldflake : The NLD developers apparently have some humor ;)

[2018-08-03 17:09:51] quad808 : NLD devs are BITCHES! Who are THOSE people??!!

[2018-08-03 17:10:26] quad808 : DO NOT TRUST THEM.

[2018-08-03 17:10:46] quad808 : oh wait. nvm.

[2018-08-03 17:11:32] quad808 : all good. Carry on. Do you like bricks @artu-ole?

[2018-08-03 17:26:04] aciid : subtle :smile:

[2018-08-03 17:38:01] fredz : Hi @quad808 do you know if coldflake had time to add the NLD combo yet?

[2018-08-03 17:41:05] quad808 : I would say, if all goes well, he may get to it this weekend. Real life has set in for him at the moment, NLD is moving servers....so there is that too. It will get done. Thanks for the patience brother!

[2018-08-03 18:10:10] fredz : Thanks for the update @quad808

[2018-08-06 07:15:13] artu-ole : @quad808 hard to brick stuff if you know what you're doing :wink: asm doesn't lie, debugging, stepping and having control over stack is the key. Didn't have problems with it mate, thanks for asking :slightly_smiling_face:

[2018-08-06 07:30:01] artu-ole : Sorry, if I appear as a dick in my previous message(I am, but that's not the point). You made great piece of software! I will be keeping any modifications(if any were theoretically made) private.

[2018-08-07 15:24:49] flymymavic : @quad808 after some teething issues with NLD, it’s fair to say I like being able to activate sport plus etc and remove height and NFZ with a simple click, and then reverse it with a click, just got to work out why some of the options are greyed out, yeah it’s me mate, your pain in the ass customer lol

[2018-08-07 18:17:02] quad808 : LOL...no worries...we are working on some code to sort issues out. Welcome to Slack.

[2018-08-10 12:40:34] chipmangini : Does DJIGo 4 4.1.22 have panoramas, etc?

[2018-08-10 12:46:02] validat0r : .14 has ..

[2018-08-10 13:41:32] chipmangini : @ilovemynexus4 Thanks!

[2018-08-12 13:13:02] giordano.stefano1995 : boost fcc work on Mavic Pro Platinum?

[2018-08-12 14:53:20] aciid : yes

[2018-08-12 15:09:52] nickmv : can anyone tell me if the latest NLD Go supports 2.3ghz or 2.5ghz mode? Just found this channel, orig posted in ~general

[2018-08-12 15:10:21] nickmv : i got the JSON file open and see the 32ch toggle, but am unsure how to use 2.3/2.5 on my MP

[2018-08-12 18:13:12] quad808 : @nickmv yes, it is supported, but not tested yet. From Matioupi...0 is regular 2.4GHz 1 is 2.3GHz mode and 2 is 2.5 GHz mode

[2018-08-13 18:20:51] flymymavic : Hey @quad808, , ive just picked up a second Mavic Pro remote to have a play with, but it appears the MP needs to be on 01.04.0300, which will stop the height limit removal from working, is there a way in NLDZ to load the cherry picked firmware that I can get via Dankdownloader ?

[2018-08-13 18:24:10] aciid : NLDapp does the NFZ by patching , I don't know can it be "cherrypicked"

[2018-08-13 18:30:42] quad808 : Why does it need to be on 01.04.0300?

[2018-08-13 18:30:57] flymymavic : not sure i just had a read of the manual and thats what it says mate

[2018-08-13 18:32:12] quad808 : First I have heard of that. DJI. Meh. You can downgrade or do mixed. Wait. You said you picked up a 2nd remote? Are we talking remote or bird?

[2018-08-13 18:34:11] flymymavic : another remote control, it was a bargain from a FB user, couldnt resist it, page 37 of the manual, but that seems strange as thats the newest firmware but one,

[2018-08-13 18:35:07] flymymavic : oh shit ignore me im being retarded, its 01.03.0400

[2018-08-13 18:35:52] flymymavic : well im happy now

[2018-08-13 18:39:00] quad808 : LOL

[2018-08-14 17:01:24] hotelzululima : hey @quad808 further followup on the suspected broking under 17.0.3 last month on a mavic pro.. symptom at time was no device fillin no board SN no firmware.. release.. after a number of power offs it seemed to disappear and then NLD reported all the proper data and allowed patching etc

[2018-08-14 17:06:42] hotelzululima :

[2018-08-14 17:06:52] hotelzululima : @quad808 put it away in its case for a month and tried to power up this morning and it started hitting the gimbal to the limits of its stops every 20 seconds or so and then aiming cockeyed to the ground.. no response to thumbwheel.. video coming through fine but shakey.. flew a short test flight ok.. landed took inside and put on nld(under vmware fusion 8.5.10(works fine with windows 8.2) intending to reflash the result is above

[2018-08-14 17:10:01] hotelzululima : someone care to hit me with a clue stick?? is the drone and gimbal completely borked(it responds to the remote and sends video.. just cockeyed)

[2018-08-14 17:10:12] hotelzululima : and I cant flash with NLD

[2018-08-14 17:10:34] hotelzululima : ie it was flash with .700 previously

[2018-08-14 17:12:28] hotelzululima : it also allow the flight log to be mounted..

[2018-08-14 17:23:23] hotelzululima : and previously it gave these symptoms - the gimbal doing the back and firth to the stops and being otherwise nont responsive

[2018-08-14 17:38:48] quad808 : Sounds like a bad firmware flash....you did have DJI Assistant running right? Can you get into compatibility mode, and re-flash 01.03.0700 again??

[2018-08-17 18:02:53] hotelzululima : I have both reflashed .700 downgraded to .600 reflashed to .700 the flash stalls at 99% no matter how long I wait

[2018-08-17 18:04:35] hotelzululima : I unplug&power down both the windows vm and the drone.. the serial and version artifact does not occur when assistant started first then nld.. suspect the gimbal errors are causing the 99% flash hang

[2018-08-17 18:05:15] hotelzululima : as the drone flashes sucessfully and connects the the controller and flys.. the gimbal keeps doing the crazies every 20 seconds or so

[2018-08-17 18:06:13] hotelzululima : its never had a crsash or rough landing.. and has been a bag queen since the last flash 2 months ago with occasional flights..

[2018-08-17 18:07:01] hotelzululima : tried gimbal calibration but the assistant says no way triangle with a red exclamation point

[2018-08-17 18:07:42] hotelzululima : unit is out of warranty last may assuming 1 yr(dji care)

[2018-08-17 18:10:12] hotelzululima : its slams against the gimbal stops hard enough to click.. picture coming through just fine.. going to disassemble and reseat all connections first before ordering a replacement cam

[2018-08-17 20:00:09] quad808 : Take a good look at the gimbal and make sure it is seated properly, below the tabs, etc, and in the back too. Just for giggles I would upgrade the firmware to something like 01.04.0100, stock, just to see if all your problems go away. May be a bad ribbon cable, but thats just a guess.

[2018-08-18 01:43:27] hotelzululima : I am suspecting the ribbon cable design with all the incidents I am reading about

[2018-08-18 02:12:36] hotelzululima : will try the upgrade

[2018-08-18 06:35:57] aciid : @hotelzululima camera's ribboncables?

[2018-08-18 06:37:04] aciid : they are quite cheap, I tried replacing the cables once. Didn't work since I didn't get them to stick. So I bought a whole assembly without the gimbal control board and camera

[2018-08-18 06:38:14] aciid : **My Mavic Pro Camera Adventure** 3€ for gimbal cables. ( which I didn't get to work ) 50€ for whole assembly, including cables, gimbal, ( excludes camera and control board) 10€ camera (stolen from the factory floor , sold in ebay)

[2018-08-18 15:20:57] hotelzululima : was just going to try the cables at first.. getting new adhesive to stick? may or may not be an issue(surface prep/cleaning/shoeGoo? or other hi tack polymer….course some of the industrials I have used like for polypropylene cost 50$+ for 1/4 oz and have a 2 week shelf life out of a fridge(a rubberized specialist cyano) may be cheaper for moi to just get a prewired frame

[2018-08-18 15:24:14] hotelzululima : googling for the assembly name for just the frame and vibe board sans pcb and cam but not finding a specific term to order all I find includes cam pcb etc

[2018-08-18 15:24:52] hotelzululima : and yes just flashed 1.04.0100 no improvement except the flash actually finished…

[2018-08-18 15:27:49] hotelzululima : BTW a neutered version of assistant used with NLD seems to be giving windows defender some grief.. not sure if its a false id OR if the tool actually used or if actually something activated….screen shot of the quarantined item below(all of this in a VM that is easily wiped and restored from backups going back to the start

[2018-08-18 15:28:34] hotelzululima :

[2018-08-18 15:39:46] hotelzululima : it kept interfering with status updates during the flash till I partially neutered windows defender(not sure how much the code actually listens to the settings).. wound up restarting windows several times.. ouch

[2018-08-18 15:40:21] hotelzululima : first attempt at downgrading back to 1.03.0700 failed.. still at 1.04.0100 fuck

[2018-08-18 15:42:41] hotelzululima : which was the other thing making me reluctant to send this unit in for service.. will I wind up with a updated firmware grief.. not able to rollback firmware?

[2018-08-18 15:49:21] hotelzululima : @aciid do you have a DJI assembly number for the part you used??

[2018-08-18 15:51:42] hotelzululima : @quad808 there was a module listing dumped at one point from NLD listing every module found on the bird.. how can I cause this to appear again on command outside of the “unknown firmware error report” path

[2018-08-18 15:54:39] hotelzululima : and @quad808 I think NLD is doing its job of flashing correctly.. I think some part of the gimbal cable is either damaged or something else is going on.. with the gimbal.. in either case I am now on the search for the subassembly that @aciid mentioned above

[2018-08-18 16:22:23] hotelzululima : and at one point in the downgrade.. I have to pull and reinsert the usb cable to get to the stage 2 OK prompt (could we get a fall though so no response required..?? after that it seems to get stuck at 22%(probably waiting another response not communicated in this environment..) this never ws a issue before I went to 1.04.0100 to provide a data point for you @quad808 :slightly_smiling_face:

[2018-08-18 16:24:38] hotelzululima : ARRTGH!! and assistant seems to crash at some point(icon disappears from the task bar.. when restarted the gui reappears but a assistant already running error message is generated

[2018-08-18 16:33:06] hotelzululima : doesnt get above 22% and task manage shows assistant and nld at 0%cpu

[2018-08-18 16:33:32] aciid : hmm have tyou tried reinstalling?

[2018-08-18 16:36:14] hotelzululima : and when I restart all still at 1.04.0100

[2018-08-18 16:42:47] hotelzululima : when dumldore starts running assistant no longer found in task manager

[2018-08-18 16:43:37] hotelzululima : trying 1.04.000 downgrade first

[2018-08-18 16:44:18] hotelzululima : and this time assistant restarted

[2018-08-18 16:52:30] hotelzululima : which one @aciid the neutered assistant or nld?(which updated itself to 1.7.0.4

[2018-08-18 16:52:33] hotelzululima : ?

[2018-08-18 16:52:49] aciid : you mean which assistant I have?

[2018-08-18 16:53:04] hotelzululima : the reinstall comment above..

[2018-08-18 16:53:06] aciid : I have DJI Assistant 2 v.1.1.2

[2018-08-18 16:54:01] aciid : i can upload it for you

[2018-08-18 16:54:42] hotelzululima : not right now you cant untill they clear some space I wont be able to access

[2018-08-18 16:55:00] hotelzululima : unless we dropbox or something else

[2018-08-18 16:55:12] aciid : could be that DJI Assistant is caching some things and it wont work properly because of the lack of space.

[2018-08-18 16:55:40] d95gas : The compatible version for NLD is on their site for download. Always used that version and never had any issues

[2018-08-18 16:55:41] hotelzululima : hmm doubtful its a dedicated vm dedicated to nld

[2018-08-18 16:56:25] hotelzululima : ie has at least 20 gb free etc

[2018-08-18 16:56:32] hotelzululima : 8 gb of mem

[2018-08-18 16:56:40] hotelzululima : 3 processor thbreads

[2018-08-18 16:58:12] hotelzululima : now its loosing connection with drone several times and asking for usb reconnects

[2018-08-18 16:58:47] hotelzululima : all new to moi as I only used for 1.03.0700 before this upgrade and then attempted downgrade

[2018-08-18 17:03:12] hotelzululima : will try the nld version.. i think this one may have been one of @hostiles early experiments

[2018-08-18 17:09:30] d95gas : Yes best sticking to the one that is available with NLD, that way you know there is no incompatability with versions. Not sure whether they actually do some tweaks on he assistant..... Quad808 would be able to confirm that.

[2018-08-18 17:23:41] hotelzululima : ouch this version is wanting login

[2018-08-18 17:29:11] hotelzululima : and this was it thanx.. nld running normally now the windows defender is some other issue.. wipe and restore tim

[2018-08-18 17:30:52] hotelzululima : @aciid were you able to locate the assembly number or sku/part number for the gimbal assembly sans cam and pcb?

[2018-08-18 17:32:32] good.win.alexs : Are you looking for this?

[2018-08-18 17:34:06] good.win.alexs : DJI Mavic Pro Gimbal Camera FPV HD 4k camera for mavic pro drone original Brand new in stock <http://s.aliexpress.com/VzAbumqu?fromSns=Slack>

[2018-08-18 17:38:33] hotelzululima : no that is not what I am looking for.. I am looking for the gimbal mechanical frame without pcb or cam as @aciid mentioned above for about 50 euros

[2018-08-18 17:38:52] hotelzululima : banggood would never show up in time anyway

[2018-08-18 17:39:21] good.win.alexs : 100% Original Mavic Pro Gimbal Arm Bracket Replacement Spare Parts for DJI Mavic Pro Camera Lens Arm Repair Parts (USED) <http://s.aliexpress.com/M3Abm6vi?fromSns=Slack>

[2018-08-18 17:39:37] good.win.alexs : Original Mavic Pro Gimbals Camera Arm Motor With Flat Flex Cable Kit Repair Part for DJI Mavic Pro Drone Accessories <http://s.aliexpress.com/e2I32iuQ?fromSns=Slack>

[2018-08-18 17:40:09] good.win.alexs : There is a lot of options from DJI mainland )))

[2018-08-18 17:40:28] good.win.alexs : Starting from $15

[2018-08-18 17:40:58] aciid : I ordered from DHGATE

[2018-08-18 17:41:01] aciid : the used gimbal

[2018-08-18 17:41:09] aciid : it had door to door for 0€

[2018-08-18 17:41:12] aciid : in 5 days

[2018-08-18 17:41:28] hotelzululima : ouch only used huh? will try dhgate then

[2018-08-18 17:41:30] aciid : <https://www.dhgate.com/wholesale/search.do?act=search&sus=&searchkey=mavic+gimbal&catalog=#hpsearch1806>

[2018-08-18 17:41:36] aciid : used was cheaper

[2018-08-18 17:41:38] aciid : :smile:

[2018-08-18 17:41:51] hotelzululima : do they have new?

[2018-08-18 17:41:54] aciid : works perfectly and was tested there

[2018-08-18 17:41:56] aciid : I guess check listings

[2018-08-18 17:43:22] hotelzululima : ah thanx looking at them now and getting ready to order

[2018-08-18 17:46:51] hotelzululima : oh what fun.. now getting a firmware unrecognized after flashing 1.04.000 without any intervention from start to finish.. reflashing with 1.03.0700 if possible!!

[2018-08-18 17:50:08] good.win.alexs : @hotelzululima there is no official NEW gimbals. DJI is not producing such part. Only official spare part is that one for 200-300$ with board, antivib plate, cam and so on

[2018-08-18 17:51:02] good.win.alexs : So, single unit to replace. And there are reasons - not native gimbal may not fit with your control board, its lottery

[2018-08-18 17:51:39] good.win.alexs : They are supposely paired on factory - board and gimbal

[2018-08-18 17:52:17] good.win.alexs : And, looks like only DJI has software to re-pair them

[2018-08-18 17:53:40] good.win.alexs : Hope, somebody will realize which duml commands can do this

[2018-08-18 17:54:22] hotelzululima : thats exactly what i was afraid you were going to say

[2018-08-18 17:55:59] hotelzululima : fuck and I did not want to buy a complete cam at 250 or so

[2018-08-18 17:56:30] good.win.alexs : Im waiting for gimbal assembly w/o board, and im also afraid if it will fit

[2018-08-18 17:57:39] hotelzululima : knew I should have gotten a spare bird on amazon prime day

[2018-08-18 17:58:11] good.win.alexs : aciid has success story with gimbal, but there somebody wrote about having issues after replacing gimbal mechanics

[2018-08-18 17:59:39] good.win.alexs : So, as i told - its lottery until somebody will realize how to properly reset gimbal brain

[2018-08-18 18:00:58] hotelzululima : hmm wondering if this <https://github.com/o-gs/dji-firmware-tools/blob/master/comm_og_service_tool.py> will help on the latter

[2018-08-18 18:01:19] quad808 : @hotelzululima Assistant used with NLD is only V1.1.2, and it will close when DD starts, normal behaviour. Not modded by NLD, but we have a solution soon without use of Assistant. It's a pain in the ass

[2018-08-18 18:01:34] hotelzululima : yep this time its proceeding

[2018-08-18 18:02:53] quad808 : if you get stuck at 22%, usually if you clear the downloaded firmware files out from NLD/FW folder, it will work to get past that point. It forces NLD to download a new firmware copy...leave the BIN folder alone, that contains NLD DD

[2018-08-18 18:03:34] quad808 : be mindfull of firewall and antivirus programs mucking NLD up

[2018-08-18 18:04:23] quad808 : What firmware are you trying to go to, from what firmware?

[2018-08-18 18:06:40] hotelzululima : retrying install of 1.04.0100 then downgrade to 1.03.0700

[2018-08-18 18:08:01] hotelzululima : and it WAS antivirus windows defender mucking about

[2018-08-18 18:08:48] quad808 : why not just flash .0700 305/306?

[2018-08-18 18:09:36] hotelzululima : because at present it thinks it has 0.0.0 it DID have 1.04.0100 but its a might bit confused at the moment

[2018-08-18 18:09:38] quad808 : oh wait. You can't do that in NLD....ooopsie

[2018-08-18 18:09:45] hotelzululima : no shit

[2018-08-18 18:09:49] quad808 : LOL

[2018-08-18 18:10:29] quad808 : you may want to go the downgrade in this order, seems to go well... .0900, flash twice, then go to .0700 and finally flash twice

[2018-08-18 18:10:52] hotelzululima : like playing with childrens blocks nld is.. perhaps at 65 its the safety factore I need lest I cut my self on raw toys

[2018-08-18 18:11:29] quad808 : yep, try to make it easy-peasy for most peeps

[2018-08-18 18:11:40] hotelzululima : you are in a maze of twisty little passages

[2018-08-18 18:12:19] quad808 : update is being worked on, but don't know when it will be released

[2018-08-18 18:12:21] hotelzululima : gonna break out python/ruby in a oment as I start gettinbg more and more enraged

[2018-08-18 18:12:36] hotelzululima : need to reroot also after all this shit

[2018-08-18 18:13:00] quad808 : give me a shout if you run into trouble, but I know you can fix it

[2018-08-18 18:13:28] hotelzululima : its just a matter of time and endless reflashes :slightly_smiling_face:

[2018-08-18 18:13:48] quad808 : LOL....keep a fan on it...I always do

[2018-08-18 18:13:55] quad808 : bastard gets hot

[2018-08-18 18:14:01] hotelzululima : and gimbal confirmed as hardware by similar reports from last thursday in mavic pilots…

[2018-08-18 18:25:28] hotelzululima : ok back to recognized firmware 1.04.0100 now downgrading to .900 and then to .700

[2018-08-18 18:29:54] hotelzululima : have to dig out my core board so I have a safer target for the exploration of firmware permutations than my main drone

[2018-08-18 18:36:01] hotelzululima : according to thunderdrones the gimbal slamming the stops is usually a bad cable.. he charges 48$ for the entire repair if I remember correctly.. and I have my micro torque controller driver

[2018-08-18 18:37:07] hotelzululima : btw quad.. it was necessary to get to a known 1.04.0100 so that nld would KNOW to do the anti rollback hacking stage 1 and stage 2 when going to .900

[2018-08-18 18:41:37] hotelzululima : so @quad808 I take it I DONT have to login in with this assistant version.. as seems to work anyway just leaving the login request on screen unanswered?

[2018-08-18 18:41:42] quad808 : we are working on that

[2018-08-18 18:41:59] quad808 : yes, no need to login V1.1.2

[2018-08-18 18:42:13] quad808 : it won't show you the firmware version anyway

[2018-08-18 18:42:24] hotelzululima : stage 2 rollback seems to take a LONG time

[2018-08-18 18:43:10] quad808 : if it goes into phases....try connecting to bird with RC...if it connects, it ISN"T flashing, and you can reset everything and try again. May have to force stop NLD

[2018-08-18 18:43:48] hotelzululima : this is where I elicited a request to click ok from the stage2 dumldore window by replugging the drone usb

[2018-08-18 18:44:56] hotelzululima : got it.. and just now finally getting flashing 1.03.0900 on top of screen

[2018-08-18 18:45:19] hotelzululima : this where I think I am going off the rails

[2018-08-18 18:45:23] quad808 : once we incorporate DD V3, all this goes away, and it will be smoother flash to go below 01.04.0100

[2018-08-18 18:45:57] quad808 : if the bird actually flashing? Red front lights flashing or solid red?

[2018-08-18 18:46:01] hotelzululima : as I think dumldor is interpreting the reconnect as a finish message

[2018-08-18 18:46:12] hotelzululima : neither at this moment

[2018-08-18 18:46:24] quad808 : you mean off? No red lights?

[2018-08-18 18:46:34] hotelzululima : yep no red lights

[2018-08-18 18:46:42] quad808 : just have to wait

[2018-08-18 18:46:48] quad808 : do not turn it off

[2018-08-18 18:47:05] quad808 : what about back light

[2018-08-18 18:47:08] hotelzululima : was gonna try and outwait it.. seems to have lots o race conditions under the VM

[2018-08-18 18:47:40] quad808 : or you can try and connect with RC, if connects, not flashing

[2018-08-18 18:48:00] hotelzululima : still awaiting reconnect

[2018-08-18 18:48:52] quad808 : just got to wait...but full flash takes no more than 15 minutes, reflash takes 3

[2018-08-18 18:48:57] hotelzululima : when dumldor respawns assistant is where its having issues just did a usb reconnect and moving again

[2018-08-18 18:49:03] hotelzululima : flashing phase 2 now

[2018-08-18 18:49:16] quad808 : ahhhh...k

[2018-08-18 18:49:29] quad808 : lights?

[2018-08-18 18:49:37] hotelzululima : socket error 100600 connection timed out

[2018-08-18 18:49:50] quad808 : did you run as admin?

[2018-08-18 18:50:27] quad808 : you are running in a VM?

[2018-08-18 18:50:37] hotelzululima : hmm though I had set that years ago as my id can do anything normally

[2018-08-18 18:50:41] hotelzululima : yes on VM

[2018-08-18 18:50:55] quad808 : I force run as admin, even if your account is admin

[2018-08-18 18:51:14] quad808 : try connect with the RC and go before you do anything

[2018-08-18 18:51:22] hotelzululima : ?? now very fam with windows 8(I dev in openbsd and osx normallyu

[2018-08-18 18:51:45] quad808 : right-click, run as admin

[2018-08-18 18:52:34] hotelzululima : nld says flashing firmware on botton but progress bar on top never updated from initial

[2018-08-18 18:52:47] hotelzululima : canceling and restarting as admin

[2018-08-18 18:53:11] quad808 : yep, probably not flashing....try connecting with RC first...what are the status of the front lights?

[2018-08-18 18:53:23] hotelzululima : out

[2018-08-18 18:53:47] quad808 : does assistant detect it? Also run that as admin

[2018-08-18 18:54:00] quad808 : do not restart the bird

[2018-08-18 18:54:07] hotelzululima : rc connect fine

[2018-08-18 18:54:12] hotelzululima : atti mode

[2018-08-18 18:54:22] quad808 : ok, so it isn't flashing, ok to disconnect and try again

[2018-08-18 18:54:42] quad808 : got stuck on breaking the downgrade lock

[2018-08-18 18:55:16] quad808 : you can try using DD V3 if you want, might be easier

[2018-08-18 18:55:27] quad808 : no assistant to worry about

[2018-08-18 18:55:36] hotelzululima : thats seems to happen every time including trying to go to 1.04.000 (which produced the original unrecog fw)

[2018-08-18 18:55:50] hotelzululima : DD V3? where to find?

[2018-08-18 18:55:58] quad808 : hang on...

[2018-08-18 18:56:14] quad808 : <https://github.com/jezzab/DUMLdore>

[2018-08-18 18:56:46] quad808 : jezzab wrote an NLD version, but we are still using the older DD in NLD

[2018-08-18 18:56:58] hotelzululima : whoops lost my firmware version again when running nld and assistant as admin

[2018-08-18 18:57:07] hotelzululima : went to ready

[2018-08-18 18:57:12] hotelzululima : no fw version

[2018-08-18 18:57:26] hotelzululima : no unrecog fw panel coming up

[2018-08-18 18:57:27] quad808 : download DD, close NLD and assistant, run DD as admin

[2018-08-18 18:57:43] quad808 : it will show you firmware version at bottom

[2018-08-18 18:57:56] hotelzululima : restarting windows

[2018-08-18 18:58:04] quad808 : look in your NLD folder, FW folder, tell me what files are in there

[2018-08-18 19:00:43] hotelzululima : rc was till started

[2018-08-18 19:01:01] hotelzululima : on the no fw version dl DDV3

[2018-08-18 19:01:12] hotelzululima : be ready in a new york min

[2018-08-18 19:02:05] quad808 : let me know when ready...will be going to the park in a minute to fly

[2018-08-18 19:04:58] hotelzululima : v3.10 is rrunning 1.04.0100

[2018-08-18 19:05:20] hotelzululima : unlock device?

[2018-08-18 19:05:50] quad808 : nope

[2018-08-18 19:06:02] quad808 : what fw is in the FW folder

[2018-08-18 19:06:09] quad808 : NLD

[2018-08-18 19:07:28] hotelzululima : 1.03.600-1000

[2018-08-18 19:07:42] hotelzululima : 1.04.000-0100

[2018-08-18 19:07:58] hotelzululima : no 1.03.800

[2018-08-18 19:09:05] quad808 : Connect Mavic, Run DD V3 as admin, it will detect it

[2018-08-18 19:09:15] hotelzululima : already done

[2018-08-18 19:09:22] quad808 : what firmware do you want to go to 01.03.0700?

[2018-08-18 19:09:27] hotelzululima : yep

[2018-08-18 19:09:52] quad808 : click on the download firmware button in DD

[2018-08-18 19:10:05] quad808 : look for 01.03.0700 AC only

[2018-08-18 19:10:27] quad808 : download it, save to desktop, or NLD FW folder, doesn't matter

[2018-08-18 19:11:09] quad808 : Once downloaded, DD click on Load firmware and point to it

[2018-08-18 19:11:10] hotelzululima : hmm download firmware led me here <https://github.com/cs2000/DankDroneDownloader>

[2018-08-18 19:11:31] quad808 : ahhh... download that

[2018-08-18 19:11:43] quad808 : and run it

[2018-08-18 19:11:49] quad808 : that will download firmware for you

[2018-08-18 19:13:22] hotelzululima : downloading 1.03.0700

[2018-08-18 19:14:10] hotelzululima : downloaded..

[2018-08-18 19:14:22] quad808 : k, DD, load firmware

[2018-08-18 19:14:49] quad808 : then DD flash firmware, will automatic downgrade to .0700

[2018-08-18 19:15:22] quad808 : 15 minutes, THEN do it again to reflash....you will need to close DD and restart DD to do this after successful first flash

[2018-08-18 19:15:57] quad808 : DD will tell you when done first flash, then close DD, restart Mavic, open DD and flash it again

[2018-08-18 19:16:06] quad808 : done

[2018-08-18 19:16:22] quad808 : NLD should now show you at 01.03.0700, as will DD

[2018-08-18 19:18:03] hotelzululima : unable to connect to device ftp server please check rndis network driver setting and device has valid ip address.. and the front red lights on steady yellow rear blinking

[2018-08-18 19:19:29] hotelzululima : also could not transfer file blinked briefly after answering ok to above then full green status bar flashing complete device may be powered off but front red lights syill on steady

[2018-08-18 19:20:03] hotelzululima : not connecting to rc

[2018-08-18 19:20:10] quad808 : ok, that sucks...fixable. Use DD, and flash 01.04.0100 again

[2018-08-18 19:20:18] hotelzululima : just connected

[2018-08-18 19:20:25] hotelzululima : atti mode

[2018-08-18 19:20:37] quad808 : k, not flashing, may have to restart DD

[2018-08-18 19:20:53] quad808 : once it detects Mavic, reflash 01.04.0100

[2018-08-18 19:21:12] quad808 : use firmware already downloaded in NLD FW folder

[2018-08-18 19:24:05] quad808 : Here are the steps you are going to do...gonna go to the park...DD detects, flash 01.04.0100 again, 3 minutes. DD says done. Disconnect and restart drone. Run DD as admin again, connect drone. Load firmware 01.03.0700, flash firmware. 15 min. DD says success. restart drone. Run DD again, reflash 01.03.0700. 3 min. Done.

[2018-08-18 19:25:53] hotelzululima : had nld .0700 retrying with downloaded one

[2018-08-18 19:26:49] hotelzululima : thanx so much for your help @quad808!!

[2018-08-18 20:04:11] hotelzululima : I am now getting a version string to short with any of the downloaded file redownloading

[2018-08-18 20:08:46] hotelzululima : still getting was working ok.. now malfunctioning

[2018-08-18 20:11:31] hotelzululima : well this sucks dumldore broken it seems redownloaded all dumldore get unhandled exception due to versioon string too long or short

[2018-08-18 20:11:58] hotelzululima : worse off than when I started drone useless to me at 1.04.0100 need 1.03.0700 like i had

[2018-08-18 20:18:01] hotelzululima : no rc connect at present dropping back to assistant to get a new flash of 1.04.0100 done and then retry all of this

[2018-08-18 20:22:58] hotelzululima : dont feel that 1.04.0100 is a good one to suggest to try cause of the anti-rollback issue makes more difficult to flash downgrades

[2018-08-18 20:23:40] hotelzululima : especially in a timing exaggerated env like a vm

[2018-08-18 20:24:17] hotelzululima : also usb drivers may not be returning exactly responses expected being that a classic area of trouble with VMs

[2018-08-18 20:28:47] hotelzululima : reflashed still no rc connect..

[2018-08-18 20:28:54] hotelzululima : ddd can see version

[2018-08-18 20:29:00] hotelzululima : dd can see version

[2018-08-18 20:29:26] quad808 : so, were are we now... 01.04.0100?

[2018-08-18 20:29:57] hotelzululima : stuck there

[2018-08-18 20:30:11] quad808 : k, use DD, and download 01.03.0900

[2018-08-18 20:30:26] quad808 : you will have both, .0900 and .0700

[2018-08-18 20:30:37] hotelzululima : just restarted on .700

[2018-08-18 20:30:45] hotelzululima : before you said that

[2018-08-18 20:30:57] quad808 : flash with DD to .0900 first, do it twice. If flashing with DD and .0700 straight doesn't work

[2018-08-18 20:31:27] hotelzululima : evidentally the version string issued from the drone disapperared when assistant&nld reflash sucess to 1.04.0100

[2018-08-18 20:31:32] quad808 : sometimes it hangs up and requires multiple tries....nature of the beast

[2018-08-18 20:31:40] hotelzululima : I have noticed

[2018-08-18 20:31:59] quad808 : gotta break the downgrade lock first

[2018-08-18 20:32:06] hotelzululima : fotunately I was a sqa lead for a decade back in the 80's

[2018-08-18 20:32:40] hotelzululima : so used to useless and endless hamster wheels its why I quit windows back in 94

[2018-08-18 20:32:53] hotelzululima : and switched to unix erived only

[2018-08-18 20:33:38] hotelzululima : nope failed

[2018-08-18 20:34:05] hotelzululima : rndis is back though

[2018-08-18 20:35:24] hotelzululima : unsussful flash with dd causes a version string error next run

[2018-08-18 20:37:02] quad808 : I am going to punt and say it's the VM

[2018-08-18 20:37:44] quad808 : I am thinking that 01.04.0100 could not be a good flash, so go to 01.04.0300 via assistant

[2018-08-18 20:37:54] hotelzululima : I know that just trying to find a sweet spot through

[2018-08-18 20:38:05] hotelzululima : as i have NO windows systems available

[2018-08-18 20:38:27] quad808 : then we can go to .0900, or, downgrade .0300 to .0100, then go from there

[2018-08-18 20:38:34] quad808 : make sure charged batt

[2018-08-18 20:38:34] hotelzululima : i am very reluctant to flash anymore protected version

[2018-08-18 20:38:52] hotelzululima : I have been though 7 batterys since 6 this morning

[2018-08-18 20:39:18] quad808 : doesn't matter at this point. You need a good flash, and it may just be that your flash of .0100 is not fully flashed, so causing issues

[2018-08-18 20:39:33] hotelzululima : dd seems to damage the present release when it does not work

[2018-08-18 20:39:41] quad808 : here is another option...flash to 01.04.0300, then flash ONLY .0700's 305/306

[2018-08-18 20:40:12] hotelzululima : I get a better flsh by retrying with nld at least enough to get past the error message in dd

[2018-08-18 20:40:35] hotelzululima : when reflashing 1.04.0100

[2018-08-18 20:41:04] quad808 : I have seen this before...something is wrong with the .0100 flash, so it won't downgrade correctly...need to flash off of .0100, then back to it

[2018-08-18 20:41:32] hotelzululima : the antirollbacks stage 1 or 2 is breaking the 1.04.0100 when it doesnt mage to flash a lower version

[2018-08-18 20:41:35] quad808 : You can also try downgrading to 01.03.1000

[2018-08-18 20:41:56] quad808 : then, if that works, try .0900

[2018-08-18 20:42:34] hotelzululima : i MIGHT try 1.04.0200 but very nervuous the closer we get to 1.04.0400

[2018-08-18 20:42:46] quad808 : yah, no .0400

[2018-08-18 20:42:55] quad808 : .0300 is fine though

[2018-08-18 20:43:13] hotelzululima : thats why I was reluctant to try ANYTHING in the [1.04.xxx](http://1.04.xxx) series

[2018-08-18 20:43:29] hotelzululima : especially something with known antirollback

[2018-08-18 20:43:58] quad808 : DD will eat up the antirollback, as long as the base firmware is good

[2018-08-18 20:44:12] hotelzululima : DD has fucked itself for now

[2018-08-18 20:44:31] quad808 : but, the VM complicates matters, with USB drivers and what not

[2018-08-18 20:44:42] hotelzululima : reloading 1.04.0100 with nld at present

[2018-08-18 20:44:57] hotelzululima : wont EVER run a windows native machine again ever

[2018-08-18 20:45:56] quad808 : question...what is your goal, besides .0700? Altitude bypass, NFZ, or only NFZ?

[2018-08-18 20:46:07] hotelzululima : still no RC connect

[2018-08-18 20:46:12] hotelzululima : no droneid

[2018-08-18 20:46:25] hotelzululima : period altitude and nfz removed

[2018-08-18 20:46:27] quad808 : ahhh....do you use NLD GO 4.1.22?

[2018-08-18 20:46:32] hotelzululima : litchi

[2018-08-18 20:46:49] quad808 : NLD GO 4.1.22 has drone id off

[2018-08-18 20:47:30] quad808 : let me know when you get to reflash of 01.04.0100 with NLD

[2018-08-18 20:47:30] hotelzululima : no it doesnt really.. the code to xmit is still in the codebase.. its NOT present in .700 period

[2018-08-18 20:47:53] hotelzululima : and go does NOT meet my needs..(all waypoint missions)

[2018-08-18 20:48:09] hotelzululima : litchi is what our workflow based on

[2018-08-18 20:49:23] quad808 : since downgrading is being a problem, I would: upgrade via NLD, or Assistant to 01.04.0300, then flash .0700 with only 305/306

[2018-08-18 20:50:00] hotelzululima : not with nld

[2018-08-18 20:50:03] quad808 : Then, you could try going straight to full 01.03.0700. Once you get 305/306 from .0700, no downgrade lock anymore

[2018-08-18 20:50:11] quad808 : correct. DD

[2018-08-18 20:50:15] hotelzululima : on .700

[2018-08-18 20:50:53] hotelzululima : was going to go to .200 if that doesnt workj .300

[2018-08-18 20:51:17] hotelzululima : as this whole thing a BIT upsetting.. fuck DJI .0100

[2018-08-18 20:51:39] quad808 : I don't know anyone who wasn't able to downgrade

[2018-08-18 20:51:52] hotelzululima : might be the first

[2018-08-18 20:52:12] quad808 : but some have problems, and from what I have seen it's based on a bad firmware that they are trying to downgrade from

[2018-08-18 20:52:18] hotelzululima : again my environ not the usual.. and NO windows period at any of my sites

[2018-08-18 20:52:30] quad808 : once that is taken care of, it goes smoothly

[2018-08-18 20:53:18] hotelzululima : at this point I am not completely convinced.. gonna have some lunch and chat with @hostile before I do the next

[2018-08-18 20:53:43] quad808 : well...it's not like I have done this 100's of times or anything

[2018-08-18 20:54:23] quad808 : just giving you what I know works, and has been proven. Get off of .0100, and I bet it goes smoothly from there

[2018-08-18 20:54:56] hotelzululima : again I dont think you have guided anyone down THIS particular path and as a result I am going to be very reluctant to proceed further till I see some sucess which has been very elusive this morning

[2018-08-18 20:55:25] hotelzululima : i DONT like proceeding with black box understanding of the process

[2018-08-18 20:55:35] hotelzululima : need a clearer technical view

[2018-08-18 20:55:36] quad808 : all your failures have been trying to get off of .

[2018-08-18 20:55:40] quad808 : .0100

[2018-08-18 20:55:59] hotelzululima : which I installed at your behest for a data point

[2018-08-18 20:56:30] quad808 : correct. Troubleshooting the gimbal going wacky

[2018-08-18 20:56:34] hotelzululima : ie the .04 series has been pure problems from my view

[2018-08-18 20:56:46] hotelzululima : and never sghoud have proceeded there

[2018-08-18 20:56:46] quad808 : sometimes the firmware gets borked

[2018-08-18 20:57:01] hotelzululima : its borked good at this point

[2018-08-18 20:57:11] hotelzululima : damn close to being a brick

[2018-08-18 20:57:22] hotelzululima : no rc.. etc

[2018-08-18 20:58:16] hotelzululima : so again having lunch ordering replacement gimbal HW and trying to put heads together with hostile of how I can unbork short of installing my dev core board

[2018-08-18 20:59:02] quad808 : as long as either assistant, DD or NLD detects it, you are no bricked at all, and even if the usb cuts in and out, we have a fix for that too

[2018-08-18 20:59:43] hotelzululima : its a pretty unhappy bird at the moment.. time to take the dog for a wlk while I mull things over

[2018-08-18 20:59:48] quad808 : been doing support for NLD for quite a while now. been through worse than this and always have come out the other side

[2018-08-18 21:00:21] hotelzululima : I understand that.. I have to get all working and ready to go by the 27

[2018-08-18 21:00:24] hotelzululima : vacay

[2018-08-18 21:00:46] hotelzululima : now wondering if I should just order an anafi instead

[2018-08-18 21:01:30] quad808 : no worries. I have given you several paths to take to get this fixed. Anyone of them will work eventually, but from my experience, your flash of .0100 is not correct, and you need to get off of it, then you can go back to it

[2018-08-18 21:01:31] hotelzululima : as a wee bit frustrated at moment

[2018-08-18 21:01:52] hotelzululima : I want NOTHING to do with .0100

[2018-08-18 21:02:06] quad808 : the DJI flashing procedure is not good, we have found out.

[2018-08-18 21:02:12] hotelzululima : i noticed

[2018-08-18 21:02:35] quad808 : just remember that the tools just kick off the flash, the drone code does all the work

[2018-08-18 21:02:39] hotelzululima : nld flshing to .200 then back to .100

[2018-08-18 21:02:57] quad808 : k, flashing to .200 now?

[2018-08-18 21:03:02] hotelzululima : yep

[2018-08-18 21:03:07] quad808 : flash it twice

[2018-08-18 21:03:14] hotelzululima : k

[2018-08-18 21:03:25] quad808 : then skip .0100 altogether

[2018-08-18 21:03:53] quad808 : you have a fan on the drone, I hope?

[2018-08-18 21:04:51] quad808 : after 2nd flash of .0200, disconnect, restart, connect up to RC and GO, or Litchi and arm, check for errors if any

[2018-08-18 21:24:03] hotelzululima : now going from disconnected to signal lost in litchi.. dont thinkv it likey this version

[2018-08-18 21:24:11] hotelzululima : no connection

[2018-08-18 21:24:22] hotelzululima : going to try and flash .0700 with dd now

[2018-08-18 21:24:35] hotelzululima : this after flashing .0200 twice

[2018-08-18 21:25:10] hotelzululima : rndis present

[2018-08-18 21:26:10] hotelzululima : trying .900 first

[2018-08-18 21:26:49] hotelzululima : whoops no ftp server rndis not present etc

[2018-08-18 21:28:07] hotelzululima : its pingable but dd unhappy

[2018-08-18 21:28:53] quad808 : run assistant and see if it detects it...got to get the drivers right first

[2018-08-18 21:37:28] hotelzululima : it detected it

[2018-08-18 21:37:59] hotelzululima : I am downgrading to .700 wit nld right now or trying to

[2018-08-18 21:50:45] hotelzululima : first reflash from 1.04.0200 to 1.03.0700 sucessful.. rerunning

[2018-08-18 21:56:23] quad808 : nice

[2018-08-18 22:00:39] hotelzululima : flashed 2 times to .700 NO rc connect

[2018-08-18 22:00:42] hotelzululima : :disappointed:

[2018-08-18 22:02:28] hotelzululima : now getting signal lost again

[2018-08-18 22:02:53] hotelzululima : as opposed to simple disconnected

[2018-08-18 22:03:25] hotelzululima : solid red lights

[2018-08-18 22:07:48] hotelzululima : rc no connection no matter what I try it goes to signal lost on android.. never sees a connection on the rc screen.. going to take a nape I am a bit exhausted will take this up later

[2018-08-18 22:08:30] quad808 : re pair the RC to the craft

[2018-08-18 22:11:01] hotelzululima : when I wake up ttyl

[2018-08-18 22:11:53] hotelzululima : never had to rebind the mavic pro to rc.. procedure?

[2018-08-18 22:12:12] hotelzululima : so tired

[2018-08-18 22:12:33] hotelzululima : spent 9 straight hours at this

[2018-08-18 22:13:27] hotelzululima : ie painting myself into this corner :confused:

[2018-08-18 22:13:59] quad808 : <https://www.youtube.com/watch?v=G52F4hlR4MA>

[2018-08-18 22:14:19] hotelzululima : thanx so much.. will recontact whe I awaken

[2018-08-19 17:07:38] hotelzululima : yay I found complete new mavic pro cam&gimbals on ebay for 98$ <https://www.ebay.com/itm/282906983984>

[2018-08-19 17:07:58] hotelzululima : be here sat.. problem solved hopefully

[2018-08-19 17:25:04] good.win.alexs : Its without board, so still not 100%

[2018-08-19 17:26:33] good.win.alexs : And its not new

[2018-08-19 17:26:46] good.win.alexs : Read description carefully

[2018-08-19 17:27:16] good.win.alexs : On Ali there is dozen offers like this, but 20 bucks cheaper

[2018-08-19 17:27:33] good.win.alexs : Sorry, even 30

[2018-08-19 17:28:10] good.win.alexs : I took same part for $67, will have it on my hands in 1-2 days

[2018-08-19 22:50:31] hotelzululima : yep noticed that after order… and hopefully gets here in time if not then 250 at the dji store for a complete new cam assembly when we get on road.. will bring my micro torque driver

[2018-08-19 22:51:07] hotelzululima : ali wasnt ablt able to get in by 25th 2 days prior to departure

[2018-08-19 22:52:07] hotelzululima : just thunderdrones didnt have any gimbals and this person was shipping from Kentucky and claimed sat delivery

[2018-08-19 22:52:17] hotelzululima : even though the seller is based in china

[2018-08-19 22:52:22] hotelzululima : strange

[2018-08-19 22:53:01] hotelzululima : and its ebay where I had good success when things dont arrive as advertised…

[2018-08-19 22:53:41] hotelzululima : ali could not get me in by the 25th from ordering yesterday.. that the problem no real lead time..

[2018-08-19 22:59:17] hotelzululima : and this one includes the cam and lens

[2018-08-19 23:01:11] hotelzululima : ie cuts my rebuild time..

[2018-08-20 05:20:51] good.win.alexs : Yeah, ali is not best when talking about delivery dates

[2018-08-21 08:12:21] giordano.stefano1995 : Is possible install ndl 4.1.22 on phantom 4 pro Plus?

[2018-08-21 15:40:02] good.win.alexs : anybody using Litchi? How it is working with NFZ after removing NFZ with NLD?

[2018-08-21 15:40:34] validat0r : the question is whether dji sdk enforces nfz in any kind

[2018-08-21 15:41:06] validat0r : and whether litchi introduces some kind of nfz of its own

[2018-08-21 15:42:39] good.win.alexs : never used litchi, but like screenshots and thinking to try

[2018-08-21 15:42:53] good.win.alexs : so this is more question to somebody who did try it IRL

[2018-08-21 15:43:32] good.win.alexs : again, never have any deal with dji sdk (and don’t want to :slightly_smiling_face: )

[2018-08-21 16:54:53] cs2000 : Guys, 90% of the time if you’ve disabled the nfz’s with nld then use litchi they will get re added back in

[2018-08-21 16:55:15] cs2000 : Litchi is a propper authorised DJI app using their api’s so it _has_ to enforce nfz’s

[2018-08-21 16:55:54] cs2000 : You have to go through the entire removal process again to get them NFZ stuff working with NLD GO4

[2018-08-21 17:31:22] good.win.alexs : Ah, so no-nfz or litchi :( sad

[2018-08-21 20:21:01] andrwho25 : !nld

[2018-08-21 20:21:16] andrwho25 : Are there iOS builds for NLD. Looking for spark

[2018-08-21 20:21:29] validat0r : go ~ios_ipa_reversing

[2018-08-21 21:47:53] hotelzululima : Litchi WAS working just fine with 1.03.0700 NFZ never got added back it on mine it seems.. so I am unsure of your results.. BTW I am 1.75 nm from an airport with control tower callins required and after patching the drone I didnt get the NFZ warnings on litchi I did get them in the RC anymore and I run nothing but litchi..

[2018-08-21 21:48:50] validat0r : so you call in often?

[2018-08-21 21:49:17] hotelzululima : I would check right now by calling in going up to roof and launching.. and my cam is unfortunately in a malfunction state till parts deliver

[2018-08-21 21:49:29] hotelzululima : every flight period.

[2018-08-21 21:49:35] hotelzululima : in calling in

[2018-08-21 21:51:13] hotelzululima : have too much air traffic in area not to.. I also monitor <https://global.adsbexchange.com/VirtualRadar/desktop.html> (global radar view for my air space and a 50mile radius around my local airport)

[2018-08-21 21:53:52] validat0r : great service .. didn't know that ..

[2018-08-21 22:00:30] hotelzululima : o0ps should have read.. I got the NFZ warning on the rc.. nothing on litchi and the drone motors went to an on state(last time I checked was end of july…in an actual nfz with props off)

[2018-08-21 22:01:57] hotelzululima : and you kids now have me worried so a check in the actual NFZ in order with litchi…

[2018-08-21 22:04:09] hotelzululima : and of course this behaviour could change any time the sdk updates.. small hint having actually compiled the android code in the sdk.. SDK API apps are NOT responsible for NFZ enforcement the SDK itself does that if any…

[2018-08-21 22:05:01] validat0r : this is mavic?

[2018-08-21 22:05:12] hotelzululima : and of course i have no DJI GO modded or not on the phone I run litchi on

[2018-08-21 22:05:18] hotelzululima : yes mavic pro

[2018-08-21 22:09:04] validat0r : there's nfz check on the AC, and in the GO app, too .. so might very well be one in the SDK, too

[2018-08-21 22:09:09] hotelzululima : so @cs2000 I am very interested in the version number of your litchi.. the phone OS version and phone model and whether or not DJI GO has ever been installed beside litchi on the phone/tablet you are using.. as I am tracking the behaviour of the android flavor of the SDK with various patches and products such as litchi

[2018-08-21 22:10:12] hotelzululima : and drone harmony…

[2018-08-21 22:11:59] hotelzululima : just cause a check is in the code does NOT mean it ever was tested properly especially with DJI apps and firmware.. after all if DJI devs were somewhat competent.. rooting them would have been a bit harder

[2018-08-21 22:12:10] hotelzululima : consider all this as aftermarket SQA

[2018-08-21 22:14:01] hotelzululima : I regard ANY code misbehaviour as holding “possibilities”

[2018-08-21 22:14:03] hotelzululima : :slightly_smiling_face:

[2018-08-21 22:15:12] andrwho25 : !apk

[2018-08-21 22:17:35] hotelzululima : and again testing is in order to determine the true facts of the matter in the present

[2018-08-22 00:32:39] andrwho25 : can you use NLD with boot camp on a macbook ?

[2018-08-22 00:44:50] quad808 : NFZ and firmware 01.03.0700. There is a "check" for the NFZ db, but the firmware doesn't understand the check, so no worries. This is why you can manually go in to a rooted .0700 and remove the NFZ.db and remove the .0905 backup files. It won't matter what you use, the db isn't coming back on the bird. Feel free to check your rooted bird after using stock GO or Litchi, if you already removed the files. If you did the same thing on firmware above .0700 (remove nfz.db) you will get errors and need to update the nfz, or the drone will lock and not arm if my memory serves me right.

[2018-08-22 01:54:41] hotelzululima : thanx for that clarification.. one of the original reasons I never went beyond .700

[2018-08-22 01:56:19] hotelzululima : that and no modules for droneid

[2018-08-22 02:08:01] andrwho25 : kinda bittersweet. flashing my highly modded spark back to factory to give to my old man

[2018-08-22 07:20:51] good.win.alexs : @quad808 is this statement also true for mixed firmware? Or only full-stock .700?

[2018-08-22 12:35:29] good.win.alexs : is it normal that NLD can’t recognize firmware version after downgrade to .700, and after upgrade from .700 to mix of 3.700 + 4.300

[2018-08-22 12:36:00] good.win.alexs : it just says that unknown firmware version (dumldore shows version)

[2018-08-22 13:50:54] cs2000 : not normal, but usually means you have mixed module firmware or some modules failed to flash. DD and NLD use different firmware detection methods. NLD's one is more precise

[2018-08-22 13:51:08] cs2000 : checks every single module for version numbers and matches them all to a known state.

[2018-08-22 13:51:25] cs2000 : so if a module is skipped during the doengrade is doesnt match a fingerprint of a firmware we have it throws that error

[2018-08-22 13:51:39] cs2000 : Flash it again, maybe twice, and should be good @good.win.alexs

[2018-08-22 14:04:48] good.win.alexs : it’s strange

[2018-08-22 14:05:04] good.win.alexs : one time it detects FW as 4.300 (i have mixed 4.300)

[2018-08-22 14:05:22] good.win.alexs : next time it fails detecting FW (no flashing made in between)

[2018-08-22 14:05:31] good.win.alexs : will test more tomorrow

[2018-08-22 17:28:24] quad808 : @good.win.alexs we are working on some fixes, and HOPE to have things working more seamlessly soon. As to your question about mixed .700...the FC firmware is the "main" thing, so yes. If you run mixed .700s 305/306 with any other firmware, you can remove the nfz.db, and .905 backup file and be NFZ free, AND turn off in parameters. I didn't like using mixed .700, ONLY for the fact that precision landing is screwed. It's not that the Mavic won't come back and land, it will - but not turn away to face the direction it took off in, or correct position to land. Basically it comes back above take off point, and just starts landing as if you hit the land button. Not a big deal to some, but I liked the ability to do precision landing in a tight area, and never use the other upgraded features like quick shots.

[2018-08-22 17:34:18] good.win.alexs : I did mixed firmware only for one reason - want to try Litchi and dont want nfz

[2018-08-22 17:34:55] good.win.alexs : And looks like .700 fc is only one with ability to force disable nfz (as i understand)

[2018-08-22 17:35:30] quad808 : You should be fine. Running mixed with .700 is just like using .700 firmware, but updating all other modules, if that makes sense

[2018-08-22 17:35:48] good.win.alexs : Maybe, one day ill take JEB and will look inside of litchi, but definitely not soon

[2018-08-22 17:36:37] good.win.alexs : Other than forced no-nfz, i dont see anything useful in .700 fw

[2018-08-22 17:37:52] quad808 : other than well maybe...no drone ID perhaps?

[2018-08-22 17:38:03] good.win.alexs : I font care :)

[2018-08-22 17:38:08] good.win.alexs : Dont*

[2018-08-22 17:38:23] good.win.alexs : We have no restrictions there

[2018-08-22 17:38:33] good.win.alexs : Except generic ICAO rules

[2018-08-22 17:39:42] good.win.alexs : And still i have to test if dji sdk inside of litchi will not reenable nfz on .700 :)

[2018-08-22 17:40:06] good.win.alexs : Otherwise i will have no arguments to keep mixed fw :)

[2018-08-22 17:40:25] quad808 : trust me, it won't

[2018-08-22 17:40:35] good.win.alexs : Did anybody try to reverse fc fw? Is it possible to hack newer one?

[2018-08-22 17:41:22] quad808 : yes

[2018-08-22 17:41:42] good.win.alexs : Yes - tried, or yes - possible? ))

[2018-08-22 17:42:06] quad808 : many layers to this onion, and jezzab already made NFZ removal for NLD - 01.04.0100 to .0300

[2018-08-22 17:42:12] good.win.alexs : I miss pixhawk flexibility on mavic fc (((

[2018-08-22 17:42:45] quad808 : I hear you....trust in NLD...thats all I will say for now

[2018-08-22 17:43:27] good.win.alexs : Great to know

[2018-08-22 17:43:45] good.win.alexs : About nld. After removing nfz on 4.300

[2018-08-22 17:44:03] good.win.alexs : Is there any possibility that litchi can reenable it?

[2018-08-22 18:05:53] quad808 : yes. Anytime you use a Stock app, you are subject to DJI trickery

[2018-08-22 18:20:10] good.win.alexs : So, for now, only .700 fw? Or it is also not totaly safe? Im confused a bit

[2018-08-22 19:01:03] quad808 : After .700 the FC firmware was changed to include more NFZ checks to make sure DJI could force NFZ updates, along with Drone ID. This is why when .800 came out DJI made you login to the GO app with your DJI account and you need to stay logged in at all times when you fly with stock app. We were told quite clearly....DJI will never force you to do anything, will never force an update. BS. At that point, people concerned about where DJI was heading, did not upgrade past .700.

[2018-08-22 19:50:51] good.win.alexs : i see

[2018-08-23 04:29:03] hotelzululima : so @good.win.alexs did your cam arrive?

[2018-08-23 07:52:00] good.win.alexs : @hotelzululima yes, and works like new

[2018-08-23 07:52:09] good.win.alexs : made first flight already :slightly_smiling_face:

[2018-08-23 13:33:26] hotelzululima : yay mine arriving friday supposedly

[2018-08-24 13:21:41] good.win.alexs : @quad808 I have big big ask

[2018-08-24 13:22:05] good.win.alexs : are you maintaining NLD app itself? or anybody else?

[2018-08-24 13:22:30] good.win.alexs : want to ask to add module 0306 (FC) for MP with version 03.02.44.08 to be recognized

[2018-08-24 13:23:05] good.win.alexs : this is modified with Matioupi patch tools controller firmware, and it has slightly different version

[2018-08-24 13:23:34] good.win.alexs : i know, i can produce fw with same version as old one… but it’s better to see that it was flashed correctly on board

[2018-08-24 13:24:22] good.win.alexs : so, can we fix NLD to recognize this case? now, NLD is useless to do anything, have to use old assistant even to change any parameters…

[2018-08-24 22:21:51] quad808 : I hear you loud and clear, and with matioupi's release, this firmware version becomes critical to support.

[2018-08-24 22:25:40] quad808 : I don't do programming support for NLD, but this should be added soon, hopefully. I am on the same firmware. There is no reason at all to do mixed anymore.

[2018-08-25 14:40:05] elintnl : Is boost(1.5) working on the Spark?

[2018-08-25 15:34:51] validat0r : No

[2018-08-26 07:46:18] elintnl : Thanks

[2018-08-27 12:29:14] good.win.alexs : @quad808 if you may ask somebody to at least relax version check in NLD to allow it using with customized 306 as it is now - it may be perfect

[2018-08-27 12:29:44] good.win.alexs : and rest part will be implemented when it will - everybody have own life, i have respect on that as i’m acting same :slightly_smiling_face:

[2018-08-27 12:30:14] good.win.alexs : just, for parameters editing, NLD is better than old Assistant :slightly_smiling_face:

[2018-08-27 18:52:50] webmaster : Just stopping by to say, thanks to the OGs team. This wouldn't be possible without ya.

[2018-08-28 18:59:51] fredz : Whaaat? The Mavic 2 is still not supported ? OMG :see_no_evil:

[2018-08-29 08:43:47] cs2000 : haha @fredz, dont even start, Im waiting for the support tickets....

[2018-08-31 17:33:53] flyingkite : If you have an NLD license for either the mavic pro or spark and you sell any of these drones, is the license transferable or will the next owner be able to use the functions of NLD app just by downloading their own copy?

[2018-08-31 17:42:52] quad808 : It will work for the next owner, since the drone's serial is registered to NLD.

[2018-08-31 18:07:12] 007 : Is boost(1.5) working on the p4 Adv. And pro?

[2018-08-31 18:24:04] dreaded.dragon : I’m getting a “Main Controller Data error” after flashing the bird to 1.3.0700 any ideas how to fix this?

[2018-08-31 18:48:29] quad808 : You need an internal memory card installed

[2018-08-31 18:49:08] dreaded.dragon : My bird was manufactured on sept 2017. I thought those already had it?

[2018-08-31 18:49:57] quad808 : and the bird was working fine on 01.04.0100 and up? What does that tell you?

[2018-08-31 18:50:10] dreaded.dragon : Will just installing the card work? Or would I need to reflag?

[2018-08-31 18:50:18] dreaded.dragon : Red lash

[2018-08-31 18:50:22] dreaded.dragon : Fucking hell

[2018-08-31 18:50:27] quad808 : Just install the card...blue bash

[2018-08-31 18:50:51] quad808 : oh...you mean re-flash :joy:

[2018-08-31 18:51:00] dreaded.dragon : Yeah reflash

[2018-08-31 18:51:08] quad808 : nope

[2018-08-31 18:51:25] dreaded.dragon : Cool, thanks for the help @quad808

[2018-08-31 18:51:34] quad808 : but....whenever you upgrade or downgrade...ALWAYS flash twice

[2018-08-31 18:51:46] dreaded.dragon : Already did on the bird

[2018-09-01 22:28:17] mstalzer : i’m trying to put nld go 4.1.22 on a crystal sky, but every time i start djigo it crashes out and says “unfortunately dji go 4.1.22 nld has stopped”

[2018-09-01 22:28:32] mstalzer : it’s a 5.5 model running 2.4.2.0

[2018-09-01 22:29:02] mstalzer : i rooted it and installed the modified apk -i didn’t side load playstore, but that does t seem to be necessary to just get it to run

[2018-09-02 06:29:42] mathieu.peyrega : do a logcat to give us more details about the crash

[2018-09-02 06:30:13] mathieu.peyrega : CS fw 2.4.2.0 is quite old but I don't see why it would make the stuff crash

[2018-09-02 06:30:27] mathieu.peyrega : can you also make a md5 of the apk you are trying to install ?

[2018-09-02 11:52:04] mstalzer : i should have closed this out - the issue was far dumber- i didn’t use the cs version of the apk. that fixed it fine.

[2018-09-02 11:52:43] mstalzer : the problem i have now is the nfz hack still won’t let me take off. i sent in a ticket for support on that.

[2018-09-02 11:54:44] mstalzer : i have 4.1.22cs, and my spark is on 0900. the spark nfz database version says 01.00.1337, and the app and basic version numbers are 0’s.

[2018-09-02 11:55:22] mstalzer : but it still knows i’m in an nfz and won’t take off.

[2018-09-02 17:39:17] mstalzer : does the NLD NFZ process mirror the one here? <https://github.com/o-gs/DJI_FC_Patcher/blob/master/Readme.md>

[2018-09-02 17:39:41] mstalzer : there are values for special NFZ that I think the washington DC NFZ may be under - it's not an airport NFZ

[2018-09-02 19:31:06] mstalzer : something of note - when i roll my bird back to 0300 and use that NFZ i can fly - but the NLD 4.1.22 CS app still recognizes where i live as a no fly zone

[2018-09-02 19:31:21] mstalzer : i think the washington dc big zone is hardcoded somewhere else

[2018-09-02 19:31:47] mstalzer : i can fly just fine with the rolled back firmware, but the NLD go app says "you can't fly here. land now" in the top left

[2018-09-02 19:32:02] mstalzer : so it knows where i am due to bird gps

[2018-09-02 21:12:27] mstalzer : I just took it to another NFZ outside of DC and it flys normal - so it seems whatever is preventing flying in the dc no fly zone isn’t removed with the NLD patch

[2018-09-03 18:57:29] quad808 : good catch @mstalzer. I have seen this too around the DC area. This is something to look into...thanks for the info, and going to another area to test.

[2018-09-03 19:17:34] quad808 : @mstalzer can you do some checking on where you can start to fly and where you can't? Also can you send your flight logs so we can take a look?

[2018-09-03 20:19:27] mstalzer : yeah - i'll try and gather flight logs and do some test. it'll take a few days to capture it all

[2018-09-03 20:32:39] quad808 : @mstalzer appreciate anything you can do, take your time.

[2018-09-03 20:57:34] mstalzer : any specific logs?

[2018-09-04 18:17:14] dnacho : Hi, how are you? I just did the nfz removal on a p4p and I wanted know how long does it take on the reboots? Its been 5 minutes and it has not rebooted even once

[2018-09-04 19:57:32] good.win.alexs : @quad808 who is managing nld web site?

[2018-09-04 19:57:43] good.win.alexs : i see that some blog posts just disappeared

[2018-09-04 19:57:48] good.win.alexs : for ex., <https://nolimitdronez.com/nld-1703-released>

[2018-09-04 19:58:06] good.win.alexs : there was guide for datalink settings file

[2018-09-04 19:58:21] good.win.alexs : wanted to point on this for one guy - but there is no more this page

[2018-09-04 19:59:29] good.win.alexs : ah, ok, nevermind

[2018-09-04 19:59:33] good.win.alexs : it is <https://nolimitdronez.com/nld-1703-released-2> now )))

[2018-09-04 22:45:43] quad808 : @pabloiarriola The drone will do a soft reboot, so you will only hear the disconnect/connect tones in Windows. It's seconds after running the patch. You should get a done message, and if you are unsure, run it again. Won't hurt.

[2018-09-04 22:46:19] quad808 : @good.win.alexs @coldflake maintains the website

[2018-09-04 23:35:38] dnacho : How does the done message look? I only get one that says something like the drone will reboot 3 times and when you are redirected to the home page restart NLD @quad808

[2018-09-04 23:36:30] quad808 : then it probably is done. Go out and test it.

[2018-09-05 01:55:18] dnacho : And then it looks like it has downgraded to .300 version

[2018-09-05 01:55:58] dnacho : This is what I get @quad808

[2018-09-05 03:37:36] quad808 : Then all is well. What more do you want?

[2018-09-05 22:24:17] dnacho :

[2018-09-05 22:24:29] dnacho : It did not work @quad808

[2018-09-05 22:37:45] quad808 : What GO are you using?

[2018-09-05 22:39:58] quad808 : and did you do a custom FC?

[2018-09-05 22:48:42] cantrepeat : Quad808 after custom FC wont he still need to Dumldore 3.03 with NFZ stage2 ??

[2018-09-05 22:49:14] cantrepeat : but damn that's close to an airport

[2018-09-05 22:50:30] quad808 : He is using NLD, so he used the NFZ patch, BUT, depending on the GO version used...GO may override the patch, and we have found that depending on the area....it still might not work because of possible hard coding of some GPS areas

[2018-09-05 22:51:18] quad808 : If you use custom FC and turn off NFZ completely, using a stock GO, you will get loads of warnings, since the nfz.db is there also

[2018-09-05 22:51:57] cantrepeat : Ah, I remember you talking about that the other day.

[2018-09-06 01:29:48] dnacho : If you mean app version its this one @quad808 And the only thing I did was update the p4p to the latest version as it said that one was the required to do the patch and then the remove nfz I am running stock go app

[2018-09-06 01:30:27] dnacho : What should I do now and yes @catalinaskirace im doing some inspection work for the airport but I have all the permitions from them

[2018-09-06 01:34:04] quad808 : If you keep the P4 connected to windows, with speakers on, run the NLD Patch, you should hear it disconnect and reconnect. Are you using iOS GO? If so, you will need to downgrade it, I figure.

[2018-09-06 01:34:57] quad808 : and what firmware are you on?

[2018-09-07 19:23:22] dnacho : @quad808 yes I do hear it disconnect and reconnect once. And yes I am using ios go

[2018-09-07 19:23:29] dnacho : Firmware on the drone?

[2018-09-07 20:15:40] quad808 : Yes, firmware on the drone...what version.

[2018-09-09 08:20:49] cantrepeat : I read a post that NLD Boost mode only works with P4 and not mavic, is this true?

[2018-09-09 08:55:45] mathieu.peyrega : it's the 32 channel mode that works only with P4. Boost works only with Mavic

[2018-09-09 09:14:28] cantrepeat : OK, just something I read on mavicpilots.

[2018-09-09 09:14:32] cantrepeat : I emailed NLD support and the response was: "That is because it is only for the P4 line." "Impossible for the MP im afraid, totally different radio hardware compared to the P4 which does support 32ch"

[2018-09-09 09:15:05] cantrepeat : Guess he was referring to 32 chan and not boost.

[2018-09-09 09:15:42] cantrepeat : The entire thread, <https://mavicpilots.com/threads/nld-mod-client.36868/#post-517948>

[2018-09-10 15:23:58] dnacho : @quad808 its this one. And it says its compatible

[2018-09-10 18:16:39] quad808 : It sounds like the patch worked ok, the problem may be iOS GO, since you are using a stock version. Try using NLD GO 4.1.22 on Android. On iOS go, did you get a message about upgrading, or downloading an update and did you? That negates the patch and you will need to run it again. Other than that...don't know what to tell you if the patch is running ok. It's not made to use with Stock GO, since DJI can at anytime make changes in GO to force an NFZ update to negate the patch.

[2018-09-11 02:07:00] dnacho : Thank you ill do the patched dji go apk And is there a version for ios?

[2018-09-11 02:15:19] dnacho : It wont let me install the app @quad808

[2018-09-11 02:18:25] cantrepeat : how are you trying to install the apk?

[2018-09-11 02:18:45] cantrepeat : I downloaded apk installer from the google play store and used that.

[2018-09-11 02:30:16] dnacho : From my files app on a samsung s8+

[2018-09-11 02:30:41] dnacho : Wich of all the apk installers did you use?

[2018-09-11 03:00:18] quad808 : download ES file explorer.

[2018-09-11 04:01:49] kilrah : you need to uninstall the version you have on first.

[2018-09-11 04:07:07] dnacho : I installed the new version, wont they work together?

[2018-09-11 04:07:28] dnacho : And using this version and the modded dron it should work right @quad808?

[2018-09-11 06:55:56] cs2000 : Can’t run DJI GO4 and NLD GO4 together. As you will/have found, NLD GO4 will refuse to install. Same package name iirc

[2018-09-11 06:59:11] mathieu.peyrega : @cs2000 strange, did DJI GOO 4 changed it's package name recently ?

[2018-09-11 06:59:27] mathieu.peyrega : DJI GO 4 used to use dji.go.v4as package name

[2018-09-11 06:59:40] mathieu.peyrega : and NLD app uses dji.pilot.pad as package name

[2018-09-11 06:59:59] mathieu.peyrega : so both should coexist nicely... unless they changed some stuff on recent versions ?

[2018-09-11 07:00:46] cs2000 : I was guessing RE package name, but yeah they don’t co-exist anymore

[2018-09-11 07:01:07] cs2000 : Regularly see it in NLD support. Delete the original version, bam! Sorted and all installs

[2018-09-11 07:01:22] cs2000 : Even though, as you rightly say, it didn’t used to be needed

[2018-09-11 09:58:31] good.win.alexs : @cs2000 i have both on two devices

[2018-09-11 09:58:49] good.win.alexs : on tablet and phone, both android devices

[2018-09-11 09:59:03] good.win.alexs : android 7.1, and android 9.0 - no problems on both :slightly_smiling_face:

[2018-09-11 16:06:00] dnacho : It did let me install both together @cs2000

[2018-09-11 16:20:06] cs2000 : Not saying it doesn’t work for everyone, but trust me (@quad808 will agree) we have had plenty of tickets where the app won’t install unless the standard app is removed.

[2018-09-11 17:17:53] good.win.alexs : Its kinda strange, and i think there should be something specific in that cases. In plain Android it should work flawlessly

[2018-09-11 18:18:02] dnacho : Even with the nld app and re doing the nfz mod it still shows as nfz

[2018-09-11 18:18:08] dnacho :

[2018-09-11 18:18:14] dnacho : @cs2000 @quad808

[2018-09-11 18:19:30] quad808 : This makes no sense, unless the area you are trying to take off in is hard coded in the app and or firmware.

[2018-09-11 18:20:20] quad808 : And this would make you the only one who has this problem on a P4 that I know of. Just sayin.

[2018-09-11 18:22:32] dnacho : Well there is something wrong. Its not the first drone I have done with this mood. I have done some mavic pro and phantom 4 and it always worked

[2018-09-11 18:23:25] quad808 : Ok, that also doesn't make sense...so the other drones work fine in this same area??

[2018-09-11 18:23:26] dnacho : What else can I try?

[2018-09-11 18:23:54] quad808 : I am not doubting you at all....if the others work, hmmmmmm....

[2018-09-11 18:24:12] quad808 : same device used?

[2018-09-11 18:25:38] dnacho : Ill check with my clients but in theory yes

[2018-09-11 18:25:48] dnacho : This one is a p4p obsidian

[2018-09-11 18:29:24] quad808 : Can you double check the firmware on this drone, and reflash the same version using DUMLDore, then re run the NLD patch again? Thats the only thing that I can figure is not right...maybe the patch is not taking because one or more modules on the drone is incorrect.

[2018-09-11 21:09:02] coldflake : Matioupi is on the NLD team and we will include custom FC as soon as we can. We have some minor issues that we would like to clear out first. Time estimate is...very soon...less than a month at least.

[2018-09-11 21:10:26] coldflake : Regarding missing blog posts on the NLD site regarding release info are not really missing but have just been moved to Change Log

[2018-09-11 21:10:58] coldflake : We figured that it would be better to seperate release related info from general gum flapping in the blog

[2018-09-12 02:02:54] dnacho : I has reflashed it through NLD. But ill try with DUMLDORE

[2018-09-12 02:03:12] dnacho : Is there any other way to remove the nfz @quad808?

[2018-09-12 02:15:27] cantrepeat : @coldflake Is there a link to the entire change log with the release notes?

[2018-09-12 02:16:19] cantrepeat : nvm, found it at the bottom of the page.

[2018-09-12 02:17:21] cantrepeat : Some of the release notes have specific instructions on how to enable features from those releases that I could not find on the site in some other location.

[2018-09-12 02:55:14] quad808 : @pabloiarriola, yes for the P4....if you are on firmware 01.03.0509 you should be able to use NLD and disable NFZ via the check box. If you downgrade, make sure you flash twice, then use NLD. On firmware before this (such as V01.02.0602 as shown on the NLD Birdmap) NFZ control was handled solely by the Go4 app, there was no NFZ database held on the drone itself. What this means is that if you are on V01.02.0602 or below, your drone already has half of what is needed to disable NFZ's.You just need the NLD Go4 app which has the NFZ databases removed too. NLD GO 4.1.22 Essentially, make sure you are on firmware V01.02.0603 or lower, then use the the NLD GO App 4.1.22 to create yourself the custom Go4 version. This has the NFZ DB removed from the app and as such NFZ disable will work without needing to do any additional parameter setting in NLD

[2018-09-12 03:00:44] dnacho : Im on .0600 thats the latest version And the nld app says its compatible

[2018-09-12 03:01:25] dnacho : Im not sure if I can downgrade from that fw to 1.02.603

[2018-09-12 15:31:23] abdo054 : Hi everyone, Is the latest DJI FC Patcher available on NLD?

[2018-09-12 15:32:05] cs2000 : Hi Pixel, no, the full custom = FC patching isnt implemented to NLD yet, its the next thing were working on

[2018-09-12 15:32:38] abdo054 : Thanks for the quick reply! @cs2000

[2018-09-12 15:34:00] abdo054 : any idea of how long it'll take?

[2018-09-12 16:01:15] cs2000 : Sorry mate, genuinely not sure, its not me who writes it (thankfully!) @coldflake may have a better answer, but i doubt he will want to commit to anything ATM, theirs a LOT going on in NLD land at the moment

[2018-09-12 16:54:40] abdo054 : Thanks for the great work in any case!

[2018-09-12 23:31:14] cantrepeat : NLD SAR Team free keys #heros!!! Good looking out guys!

[2018-09-13 10:00:51] good.win.alexs : guyzzz

[2018-09-13 10:00:54] good.win.alexs : pleeease

[2018-09-13 10:01:05] good.win.alexs : save ppl eyes, change font on site :slightly_smiling_face:

[2018-09-13 10:01:26] good.win.alexs : it’s not awful. “awful” is very kind word for it :wink:

[2018-09-13 10:01:56] good.win.alexs : it’s 100% unreadable now

[2018-09-13 10:02:21] good.win.alexs : if you want - i can help a little with small fixes with web :slightly_smiling_face:

[2018-09-13 10:02:25] cantrepeat : Yeah, I noticed that change too. Especially when looking at change log text.

[2018-09-13 10:03:13] cantrepeat : I know I'm old and my eyes aren't what they used to be but when I have to put on glasses to view a website it's bad. :smile:

[2018-09-13 17:09:12] quad808 : I hear you loud and clear...first thing I said... font too small!! It will be fixed.

[2018-09-13 17:13:19] andrwho25 : Happy to help out with site

[2018-09-13 17:17:56] quad808 : thanks my man...coldflake is on it.

[2018-09-14 14:45:34] 007 : Hi. I use in the NLD 22 on my p4p but not see the 5.8GHZ ? Just the 2.4GHZ ?

[2018-09-14 14:46:34] dnacho : Hey @quad808 I tried what you said and it still wont work

[2018-09-14 23:08:26] quad808 : @pabloiarriola I have no more help I can give you. You must have the only P4 that this doesn't work on, OR something is not being done correctly.

[2018-09-14 23:23:02] dnacho : Would it matter if its a p4p obsidian?

[2018-09-14 23:40:52] quad808 : It shouldn't, unless DJI did something to them differently....I think you may be the only one who we know of who did this on an obsidian...

[2018-09-15 01:57:51] rev : Anyone know of support for M600 Pro ?

[2018-09-17 09:32:15] mingtao : you need downgrade M600 to lower version

[2018-09-17 09:33:52] coldflake : @rev Would you be interested in beta testing our support for the M series?

[2018-09-17 15:54:35] artu-ole : there's no silencio functionality in nld, is there?

[2018-09-17 15:58:42] cantrepeat : No there isn't.

[2018-09-17 15:59:56] artu-ole : ok, do you know if RC modules can be decrypted with same `dji_ferify` from AC or there's a different one in RC?

[2018-09-17 16:01:46] cantrepeat : Sorry, I don't have any idea if that is possible or not.

[2018-09-17 16:03:53] artu-ole : well, silencio guy was able to decrypt it somehow to create the patch, so just thinking whether that would work or it should be done on RC. I suppose I can just try and see :smiley:

[2018-09-17 16:07:01] 1313659 : <http://dji.retroroms.info/howto/pyduml> Follow the steps here. How can I not flash the firmware on the M600 aircraft?

[2018-09-17 16:08:41] 1313659 : @dreadwing007 @vk2fro

[2018-09-17 16:09:07] vk2fro : @vk2fro has joined the channel

[2018-09-17 16:09:07] dreadwing007 : @dreadwing007 has joined the channel

[2018-09-18 05:50:26] ben_lin : Is P4P2.0 compatible with NLD?

[2018-09-18 10:29:51] cantrepeat : Is there a way to change the transmission freq to the 2.33 or 2.57 using nld 4.1.22?

[2018-09-18 10:34:13] mathieu.peyrega : m_SpecialFrequencyMode flag in the datalinktuner json file. value 1 is for 2300MHz value 2 is for 2500MHz

[2018-09-18 10:34:19] mathieu.peyrega : default value 0 is for 2400MHz

[2018-09-18 10:34:36] mathieu.peyrega : this is not actually tested to work (but tested safe for the bird)

[2018-09-18 10:38:14] cantrepeat : is the datalink.tuner.json file supposed to be in the og_settings folder? I don't see one.

[2018-09-18 10:39:51] cantrepeat : dabg it

[2018-09-18 10:39:55] cantrepeat : dang it that is

[2018-09-18 10:40:28] cantrepeat : found it, datalink.settings.json > mSpecial bla bla

[2018-09-18 10:42:34] cantrepeat : thought the actual name of the file was datalinktuner, duh

[2018-09-18 10:44:05] cantrepeat : There's probably 20 wifi networks within a mile of my house.

[2018-09-18 17:26:07] cantrepeat : is there a setting, that when using google maps, for a default zoom when started?

[2018-09-18 17:26:34] cantrepeat : When I first start GO the mini map is zoomed out to the entire US

[2018-09-19 21:23:13] rev : @coldflake I do know some folks that would..!

[2018-09-22 18:31:50] hotelzululima : @quad808 figured I would try you first.. m2pro woes with the RC??

[2018-09-22 19:26:15] hotelzululima : turns out assistant2 with osx is broken pretty badly as regards the rc

[2018-09-23 01:57:29] quad808 : no idea. Haven't messed with the M2pro yet

[2018-09-25 02:19:32] edisonbattery : There is a special version of Assistant specifically for Mavic 2. I personally tested both versions. You can adjust firmware on the bird with either, but only the version for Mavic actually upgrades the RC firmware. On the regular version of assitant it says 'orange' where it should say Mavic 2 RC.

[2018-09-25 03:50:42] 1313659 : @edisonbattery version is 1.1.2?

[2018-09-25 23:50:08] edisonbattery : sorry for being vague

[2018-09-29 18:35:56] abdo054 : Does NLD work with mavics without the internal MicroSD as well?

[2018-09-29 20:24:18] cantrepeat : I believe with firmware 01.04.0200 and up it does

[2018-09-29 22:01:21] quad808 : @abdo054 yes, but if your bird doesn't have an internal SD card, you can't go below 01.04.0100. You need the SD card for that.

[2018-09-29 22:02:29] abdo054 : Thanks @quad808

[2018-09-29 22:04:03] cantrepeat : @quad808 So 0100 and up no card?

[2018-09-30 03:05:51] quad808 : correct. The flight records are written to system memory and not the SD card.

[2018-10-01 15:38:37] cantrepeat : Just noticed some of the post that cs2000 is putting the new forums are getting cut-off upon copy and paste. IE <https://nolimitdronez.com/boards/topic/4/nld-go4-crystalsky-instructions#74> stops abruptly. It

[2018-10-01 15:38:59] cantrepeat : 's missing the google android device id stuff.

[2018-10-01 15:39:29] cantrepeat : I was trying to update that post with my windows CS rooting and app install stuff but it got cut short on a copy and paste as well.

[2018-10-01 15:39:49] cantrepeat : Would be nice to add a preview function to the post.php as well.

[2018-10-01 18:49:11] dreaded.dragon : Does anybody know where the firmware files are stored by default on windows?

[2018-10-01 18:51:38] cantrepeat : Firmware files for what?

[2018-10-01 18:51:56] dreaded.dragon : Remote once they are downloaded to be flashed

[2018-10-01 18:52:43] cantrepeat : How were they downloaded? What program?

[2018-10-01 18:52:50] dreaded.dragon : Nod

[2018-10-01 18:52:54] dreaded.dragon : Nld

[2018-10-01 18:53:49] dreaded.dragon : Nvm, just found em

[2018-10-01 18:54:01] cantrepeat : NLD used a copy of dank downloader do get the firmware files

[2018-10-01 18:54:21] cantrepeat : ok, good deal

[2018-10-01 18:54:35] dreaded.dragon : Thanks anyway @catalinaskirace

[2018-10-01 18:54:37] cantrepeat : !DDD

[2018-10-01 18:54:53] cantrepeat : you can always download the firmwares outside of NLD just to save them.

[2018-10-05 05:56:54] 007 : Hi. Were did you find it ?

[2018-10-05 17:33:26] cantrepeat : anyone else having issues get NLD website to load?

[2018-10-05 17:43:02] d95gas : Not working for me from the UK

[2018-10-05 18:57:57] cantrepeat : Yeah, NLD app wont load without the website being accessible.

[2018-10-05 19:35:38] quad808 : uhoh me too

[2018-10-05 19:36:22] cantrepeat : DDOS by mad user!! :smile:

[2018-10-05 19:36:48] quad808 : !DJI

[2018-10-05 22:25:00] cantrepeat : :disappointed:

[2018-10-06 02:10:01] abdo054 : is it down because of maintenance?

[2018-10-06 15:42:11] cantrepeat : Might I suggest alternate/backup key authentication servers or even an offline mode so we can still run the NLD app during server outage.

[2018-10-06 15:42:36] coldflake : Nld is back up again

[2018-10-06 15:42:47] coldflake : We are moving it to our own severs

[2018-10-06 15:43:20] coldflake : It will be much faster and much more stable while also being load balanced with an aws

[2018-10-06 15:44:17] cantrepeat : @coldflake awesome news!!

[2018-10-06 15:45:04] abdo054 : :+1:

[2018-10-06 15:45:05] cantrepeat : yup, working on my end

[2018-10-06 15:47:07] coldflake : Sorry for the downtime, moving to the new servers will start tomorrow

[2018-10-06 15:48:45] abdo054 : Are we getting the new update tomorrow as well :grinning:?

[2018-10-06 16:02:24] coldflake : That just got postponed a few days due to the sever crash. We simply have to move nld to the new servers we bought for the purpose more than a month ago

[2018-10-06 16:02:37] coldflake : Everything is ready and rolling, it just needs to be executed

[2018-10-06 16:03:09] coldflake : And hell, I guess that the last downtime just made that much more a priority as ever before lol

[2018-10-06 16:03:44] coldflake : So ridiculous of cci hosting but... Fuck that, it will be transfered tomorrow

[2018-10-06 16:04:19] abdo054 : very exciting news.. can't wait for whats coming!

[2018-10-06 16:13:22] tommiboost : When will the new custom firmware be released? Also have you fixed the map issue?

[2018-10-06 16:15:31] coldflake : The map issue is being looked into and the custom FC will be the next big release. We are kind of planning nld v2 in a way without actually calling it v2 :)

[2018-10-06 16:16:13] coldflake : We need to finish some stuff on the website, fix a few bugs and also make it crystal clear why nld does not recognize a particular firmware

[2018-10-06 16:16:32] tommiboost : Custom firmware can't come soon enough :sunglasses:

[2018-10-06 16:17:07] coldflake : It is not nlds fault but more the flashing process that is so staggeringly flawed that people end up with mixed stuff and wrong modules

[2018-10-06 16:17:24] coldflake : @tommiboost agreed

[2018-10-06 16:26:04] d95gas : Nice work guys, and good luck with the transfer to your own servers.... I know how much work and stress goes into that one, but sure you will come out tops :+1:

[2018-10-07 13:52:44] 007 : Hi everyone. Someone know why i can't see the green/red line on 5.8 ghz on the 2.4 ok, on my p4p. The p4p fly on 5.8 ok. Thanks

[2018-10-07 19:24:07] good.win.alexs : @coldflake IIS on server? windoz??? srsly? open MySql port 0_0 ? this are stupid mistakes or very tricky defence tactic :slightly_smiling_face:

[2018-10-07 19:25:24] good.win.alexs : i hope you are not using hMailServer for anything serious…

[2018-10-07 19:28:59] cantrepeat : honeypot?

[2018-10-07 19:37:15] good.win.alexs : i hope it just looks like cake from outside :slightly_smiling_face:

[2018-10-07 22:54:26] coldflake : @good.win.alexs Using MYSQL in general is a mistake

[2018-10-08 07:08:06] good.win.alexs : not bad at all. if you have it locally behind firewall. but giving open port is huuuge mistake

[2018-10-08 07:08:57] coldflake : Yes agreed. The Panama hosting company that we are using is a fucking clown show

[2018-10-08 07:09:19] coldflake : We are moving everything to our own monster server located in Denmark

[2018-10-08 07:09:47] coldflake : It will be available through aws tunneling and shit so from tonight, a completely different setup

[2018-10-08 07:12:10] good.win.alexs : good to hear :slightly_smiling_face:

[2018-10-08 07:12:21] good.win.alexs : cci is bullshit

[2018-10-08 07:13:08] coldflake : Yes, it's the asshole of the internet

[2018-10-08 07:13:30] coldflake : We initially chose it because of their policies

[2018-10-08 07:13:41] coldflake : To avoid take downs and shit

[2018-10-08 07:14:03] coldflake : Obviously we should have read the reviews beforehand lol

[2018-10-08 07:14:05] good.win.alexs : and still got a lot of downtimes… for other reasons )))

[2018-10-08 07:14:12] coldflake : Oh yeah

[2018-10-08 07:14:18] coldflake : They are really clowning around

[2018-10-08 07:14:53] coldflake : The other day, we forgot to pay them because we suspended the automated payment as we are moving out of there anyway

[2018-10-08 07:15:08] coldflake : I quickly noticed that they suspended the server

[2018-10-08 07:15:21] coldflake : I paid and then it would not come online again

[2018-10-08 07:15:29] coldflake : The fucking deleted out image!

[2018-10-08 07:15:49] coldflake : So after more than 24 hours of downtime it wss magically online again

[2018-10-08 07:16:17] good.win.alexs : sounds great )))

[2018-10-08 07:16:23] coldflake : Deleted our server image lol

[2018-10-08 07:16:29] coldflake : Yes it was fantastic

[2018-10-08 07:16:35] coldflake : It really made my Saturday

[2018-10-08 07:16:47] good.win.alexs : yeah, i can imagine

[2018-10-08 07:17:31] good.win.alexs : like “admin” on one of our customers site deleted folder with words “there are two same folders, so i have decided to free some space”

[2018-10-08 07:17:46] good.win.alexs : and actually there was one folder, and sym link….

[2018-10-08 07:17:56] good.win.alexs : and it had all production software in it

[2018-10-08 07:18:03] coldflake : lol

[2018-10-08 07:18:07] coldflake : That was bad

[2018-10-08 07:18:19] coldflake : Symlink lol poor guy

[2018-10-08 07:22:31] good.win.alexs : it’s good that i had fresh backup

[2018-10-08 07:22:45] good.win.alexs : and it took just few hours of downtime for whole factory :smile:

[2018-10-08 08:15:46] coldflake : Yeah, it can be very costly to say the least

[2018-10-08 13:20:43] good.win.alexs : it was. that’s why i’m eating my bread :slightly_smiling_face:

[2018-10-09 20:51:44] cantrepeat : Will we need to build a new FC once a working HERE key is added?

[2018-10-09 21:30:35] validat0r : no

[2018-10-09 21:47:35] abdo054 : Anyone know what happens if I used a stock Go4 with an NLD modded bird?

[2018-10-09 21:55:59] validat0r : uhm, nothing?

[2018-10-09 22:07:55] abdo054 : so it wont deactivate it i assume

[2018-10-09 22:14:00] validat0r : no

[2018-10-09 22:14:40] abdo054 : Thanks

[2018-10-09 22:14:53] abdo054 : even the NFZ database wont be affected right?

[2018-10-09 22:15:16] quad808 : ummmm...you realize that there is a NFZ in GO?

[2018-10-09 22:15:30] validat0r : stock app has nfz db .. and will stop you

[2018-10-09 22:15:45] validat0r : even if AC is patched

[2018-10-09 22:15:47] quad808 : unless

[2018-10-09 22:16:17] quad808 : AC is patched with NFZ off....you will get warnings

[2018-10-09 22:16:45] quad808 : AND you need to have run the NLD NFZ patch that jezzab made for NLD

[2018-10-09 22:17:17] quad808 : you may or may not still get warnings. I don't think I have tested that combination.

[2018-10-09 22:17:24] abdo054 : Thanks for the quick reply

[2018-10-09 22:18:33] quad808 : go the best route...NLD GO 4.1.22 and NFZ patched 01.04.0300, or even better yet...custom FC

[2018-10-09 22:20:05] abdo054 : I have NLD GO on an android and it works great.. I'm asking because I want to try the app on the iphone\

[2018-10-09 22:20:35] quad808 : Go for it. If you get prompted to update the NFZ, ignore.

[2018-10-09 22:20:45] abdo054 : Thank you sir

[2018-10-09 22:21:03] quad808 : otherwise you will need to run the NLD NFZ patch again.

[2018-10-09 22:21:47] quad808 : and the world will come to a screeching halt. Cats will cry. Dogs will wimper. Babies will shit their diapers. Oh wait.

[2018-10-09 22:22:04] quad808 : !DJI

[2018-10-09 22:25:27] abdo054 : :joy:

[2018-10-09 22:25:35] mstalzer : what’s the best way for nfz on an inspire 2? i have nld go 4.1.22 and running v01.01.0100 on the bird, but the nfz setting in flight parameters isn’t working. i’m still told i’m in an nfz.

[2018-10-09 22:49:55] quad808 : Can you fly, or just get warnings?

[2018-10-09 22:50:53] mstalzer : can't take off

[2018-10-09 22:52:37] quad808 : These params are not there? #NFZ disable g_config_airport_limit_cfg_cfg_disable_airport_fly_limit = 1 (0) g_config_airport_limit_cfg_cfg_limit_data = 20250910 (20150910)

[2018-10-09 22:53:08] quad808 : I have not worked on an Inspire yet.

[2018-10-10 00:12:23] ls7454 : v01.01.0100 exists?? wont work above V01.01.0200 according to the birdmap. Can confirm working on 01.0110 mixed with 02.0200

[2018-10-10 06:05:17] hotelzululima : !wkik

[2018-10-10 06:05:24] hotelzululima : !wiki

[2018-10-14 20:33:41] trollspeed : Any support for MA V01.00.0500?

[2018-10-15 18:52:01] andrwho25 : No

[2018-10-15 19:07:04] trollspeed : Looks like no support, but changing params at all :/

[2018-10-16 11:40:10] coldflake : Yes, there is support for MA but it is not as widespread as one would like In the next release you will be able to flash firmwares as well. It is correct that as of now, the only supoprt is modding the parameters and the speed mods also works (as they are based on parameters that are still there)

[2018-10-16 18:09:19] tommiboost : Custom firmware release date?

[2018-10-16 18:17:00] cantrepeat : There is a new blog on the NLD site that says Soon™

[2018-10-16 18:17:50] cantrepeat : <https://nolimitdronez.com/winter-is-coming>

[2018-10-17 10:35:12] trollspeed : Any updates on dates for MA? Previously because of wrong birdmap on site i've got to the latest firnware which was claimed as downgradeble.

[2018-10-17 10:47:57] coldflake : I am not the one doing the hacking on MA or M2 but my fellow OGs is and we do share information in a very little trusted circle. Circle of Trust lol

[2018-10-17 11:31:27] coldflake : If there is a bug it will be fixed in the next release

[2018-10-17 12:56:00] coldflake : Ok I will look into it. I haven't heard about it at least.

[2018-10-17 13:06:20] coldflake : I rarely have time for following the general talks here on slack but if a support ticket is opened with issues of that nature it will be brought to my attention by the support team.

[2018-10-18 13:43:05] hotelzululima : @coldflake is TrustForce == TrustZone?? havent run into TrustForce yet so I am curious that I may have missed something critical..

[2018-10-19 13:10:10] cs2000 : @hotelzululima TrustForce == TrustZone indeed, typo i suspect

[2018-10-19 19:57:18] quad808 : trustforce 5

[2018-10-20 11:33:38] coldflake : Yeah, typo, stupid phone...

[2018-10-20 22:45:47] jakub : <https://d30y9cdsu7xlg0.cloudfront.net/png/358467-200.png>

[2018-10-22 09:39:53] cs2000 : Just in-case anyone here is after some NLD support; Coldflake completed the server move last night from the shitty CCI hosting to our own propper dedicated servers managed in-house which is amazing news. If you have any issues accessing the website/app today, try an "ipconfig /flushdns" One remaining issue is the support website is down currently (database issue) so as a temp measure im happy to field support requests in here until its back

[2018-10-22 09:40:55] cs2000 : set the channel topic: **NLD:** Up | **Support:** Down | _Support being handled in slack for now_

[2018-10-22 09:41:37] cantrepeat : site is loading ok for me

[2018-10-22 09:42:06] cs2000 : the main website should be OK for most, but since we moved servers there could be some DNS issues :slightly_smiling_face:

[2018-10-22 09:42:51] cantrepeat : DNS propagation, even in 2018 it's a lag

[2018-10-22 09:43:18] cs2000 : yep, archaic system, but wasnt really ever designed for us mear mortals to be using!

[2018-10-22 09:43:23] cantrepeat : I signed a check 2019 the other day hoping it would make things faster!

[2018-10-22 16:16:51] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.7.0.5 Do Not Request Support Here* use [support.nolimitdronez.com](http://support.nolimitdronez.com)

[2018-10-22 16:17:29] cs2000 : Support system is back up guys :wink:

[2018-10-25 17:53:07] c.binetti : Thanks for the great work guys. looking forward for mavic air support :smile:

[2018-10-29 08:14:25] good.win.alexs : may i write one “wish” guys? is hard to add one extra option into NLD Go for Force CE?

[2018-10-29 08:14:41] good.win.alexs : and yes, correct, i’m talking about lowest possible TX level permanently :slightly_smiling_face:

[2018-10-29 08:15:18] good.win.alexs : i have wifi boosters on both RC and AC, and FCC is little bit too high for them

[2018-10-29 08:15:41] coldflake : That is a good point

[2018-10-29 08:16:01] coldflake : I think that it should be possible for sure

[2018-10-29 08:16:39] coldflake : ...but, we were messing around with making our own android app a couple of months ago for setting the signal levels

[2018-10-29 08:17:03] coldflake : a standalone app that allows you to select the exact desired signal strength

[2018-10-29 08:17:56] coldflake : for me personally, when I were flying our P4 with Max boost which is 1.6W if I remember correctly, that gave me more than 10 km in range

[2018-10-29 08:18:09] coldflake : ...and I could have gone further but had battery issues

[2018-10-29 08:19:18] coldflake : Just setting signal strength to 1.6W makes a booster unneccesary

[2018-10-29 08:19:44] coldflake : FCC mode is only 0.9W

[2018-10-29 08:20:23] coldflake : EC is 0.6W which is next to nothing and a whole friggin Watt in difference compared to max strength the P4 RC can output

[2018-10-29 08:25:21] good.win.alexs : @coldflake i have 2W booster in my bird :stuck_out_tongue:

[2018-10-29 08:25:36] good.win.alexs : fully embedded into body - no signs of intrusion ))

[2018-10-29 08:26:26] coldflake : that is cool but the bird is already capable of 1.6W as well as the RC

[2018-10-29 08:26:31] good.win.alexs : and 3W on RC. I’m flying mostly in urban regions, so interference level is so high that yeven with Boost Mode i can’t fly for more than 1km

[2018-10-29 08:27:07] coldflake : so in all fairness, the slightly longer range that you "maybe" get is not worht the money and effort unless you also use battery boost packs.

[2018-10-29 08:27:17] good.win.alexs : ah, forgot, this is indirect fly - i have no good point to have direct view on bird

[2018-10-29 08:27:36] coldflake : i see

[2018-10-29 08:27:51] good.win.alexs : so 1.2km is max that i got without boosters

[2018-10-29 08:27:56] coldflake : I had a rooftop antenna with 3W boosters on them

[2018-10-29 08:28:01] coldflake : wow

[2018-10-29 08:28:07] good.win.alexs : and for Ocusync difference between 1.5w and 2w is huge

[2018-10-29 08:28:18] coldflake : sounds very strange dude

[2018-10-29 08:28:40] coldflake : what bird is it?

[2018-10-29 08:28:47] good.win.alexs : MP1

[2018-10-29 08:28:52] coldflake : ok

[2018-10-29 08:29:12] good.win.alexs : normally, between me and birds there are few tall buildings :slightly_smiling_face:

[2018-10-29 08:29:20] good.win.alexs : so no VLOS at all

[2018-10-29 08:29:28] coldflake : yeah ok

[2018-10-29 08:30:00] good.win.alexs : outside of city most probably battery will die earlier than link )))

[2018-10-29 08:30:07] coldflake : I had a rooftop antenna with 3W boosters and (unfortunately) a very long cable in between

[2018-10-29 08:30:49] good.win.alexs : with long cable you should be ok with FCC level - your cable will work as attenuator, bringing output level to acceptable for boosters :slightly_smiling_face:

[2018-10-29 08:31:00] good.win.alexs : just install boosters closer to antennas

[2018-10-29 08:31:02] coldflake : but when I boosted the RC to 1.6W I had no probs reaching 9KM on an semi-omni directional outdoor WiFi antenna

[2018-10-29 08:31:04] good.win.alexs : not on RC side

[2018-10-29 08:31:07] coldflake : x2 for P4

[2018-10-29 08:31:25] coldflake : yes exactly

[2018-10-29 08:31:36] coldflake : i had the boosters just before the antennas

[2018-10-29 08:31:55] coldflake : then 15m of cable to the RC

[2018-10-29 08:32:07] good.win.alexs : with Boost and half sphere helix antennas on RC - i got 1.2km in city

[2018-10-29 08:32:14] coldflake : but it was VERY sensitive to cable length in EC mode LOL

[2018-10-29 08:32:28] good.win.alexs : with booster in bird and booster on RC i got mor then 2km in same direction

[2018-10-29 08:32:30] coldflake : that is really not much

[2018-10-29 08:33:01] good.win.alexs : and i have lost RC signal earlier - video link had still good level

[2018-10-29 08:33:16] coldflake : ok that is even more strange dude

[2018-10-29 08:33:30] good.win.alexs : but it was 2W on bird and 2W on RC

[2018-10-29 08:33:50] good.win.alexs : ocusync is working much better than FHSS on rc side

[2018-10-29 08:34:29] coldflake : I dont know what comes into play but I would say that I have heard other people before having boosters and all kinds of stuff on their bird and only getting a litte more than the specs

[2018-10-29 08:34:35] good.win.alexs : now i have good Sunhans with 2.5W - but it’s raining outside (((

[2018-10-29 08:34:55] coldflake : and in my case, I have only used the software boost and I can fly longer than the battery will take me home again

[2018-10-29 08:35:06] good.win.alexs : @coldflake modding bird is very tricky

[2018-10-29 08:35:14] coldflake : and also, I live in the 2nd largest city in DK so lots of disturbance too

[2018-10-29 08:35:29] coldflake : especially signal stuff

[2018-10-29 08:35:47] coldflake : that is fucking black magic bc most people dont fully understand the mechanics

[2018-10-29 08:35:51] good.win.alexs : i have installed booster instead of Wifi board, with big radiator. and it is in good place - catching some air flow from internal cooler

[2018-10-29 08:35:52] coldflake : and I am one of those lol

[2018-10-29 08:36:16] coldflake : I just had good results putting some shit together and just paid what it cost to get some good shit

[2018-10-29 08:36:29] coldflake : ok

[2018-10-29 08:36:31] good.win.alexs : for boosters overheat is worst scenario

[2018-10-29 08:36:37] coldflake : ues

[2018-10-29 08:36:39] coldflake : yes

[2018-10-29 08:36:59] coldflake : With the P4 RC its no porblem at all to use 1.6W

[2018-10-29 08:37:18] coldflake : but with the Mavic and Spark RC, ppl say that it overheats

[2018-10-29 08:37:31] good.win.alexs : in mkst

[2018-10-29 08:37:32] coldflake : and signal is lost and all kinds of disasters start to happen lol

[2018-10-29 08:37:50] good.win.alexs : in most RCs on MP there is bug in hardware

[2018-10-29 08:37:57] coldflake : ok

[2018-10-29 08:38:09] good.win.alexs : there is thermal pad inside of RC

[2018-10-29 08:38:21] good.win.alexs : under metal shield on amplifier

[2018-10-29 08:38:26] coldflake : ok

[2018-10-29 08:38:32] good.win.alexs : so this thermal pad is misaligned ___

[2018-10-29 08:38:35] good.win.alexs : :smile:

[2018-10-29 08:38:38] coldflake : lol

[2018-10-29 08:38:42] coldflake : ok wow

[2018-10-29 08:38:42] good.win.alexs : it is glued to shield

[2018-10-29 08:38:51] good.win.alexs : and it is just in the air

[2018-10-29 08:38:54] good.win.alexs : doing nothing

[2018-10-29 08:39:00] coldflake : lol

[2018-10-29 08:39:03] good.win.alexs : and it has perfectly same size as Amp

[2018-10-29 08:39:11] good.win.alexs : so it was supposed to cool it…

[2018-10-29 08:39:28] coldflake : makes sense

[2018-10-29 08:39:33] good.win.alexs : so yes, Skyworks on mavic RC is cooled by nothing

[2018-10-29 08:39:41] coldflake : aha

[2018-10-29 08:39:45] coldflake : that explains a lot then

[2018-10-29 08:39:49] good.win.alexs : not sure about all revisions, but mine was that

[2018-10-29 08:40:07] good.win.alexs : and my friend from other country told that he checked two RCs - all same

[2018-10-29 08:41:20] coldflake : ok but a lot of people were also complaining about overheating issues on Mavic and Spark RC when they used the boost mod

[2018-10-29 08:41:27] coldflake : I have always loved it

[2018-10-29 08:41:44] coldflake : but ppl only wanted FCC BC of overheating issues

[2018-10-29 08:41:58] good.win.alexs : yes, without proper cooling with 1.5W of power on Skyworks amp without cooling…

[2018-10-29 08:42:03] good.win.alexs : sure, it will give problems

[2018-10-29 08:42:12] coldflake : sure winner for probs

[2018-10-29 08:42:26] good.win.alexs : 0.4W and 1.5W is huge difference for silicone IC

[2018-10-29 08:42:33] coldflake : yes lol

[2018-10-29 08:42:39] coldflake : quite abit

[2018-10-29 08:42:50] coldflake : but maybe that is also the problem with Spark RCs

[2018-10-29 08:43:03] coldflake : they are very identical in the design internally

[2018-10-29 08:43:08] good.win.alexs : even there is cooler in RC that is pointing straight to RF circuit EM shield

[2018-10-29 08:43:17] good.win.alexs : so, shield is being cooled

[2018-10-29 08:43:21] good.win.alexs : but not IC

[2018-10-29 08:43:27] good.win.alexs : without thermal pad

[2018-10-29 08:43:29] coldflake : that is just amazing lol

[2018-10-29 08:43:54] good.win.alexs : i was in shock after realising that ))

[2018-10-29 08:44:52] good.win.alexs : it’s easy to check Spark - just disassemble RC and remove shield on top of RF part

[2018-10-29 08:45:02] good.win.alexs : normally, there should be pad on amp

[2018-10-29 08:45:18] good.win.alexs : on Mavic Pro there should be two pads - on amp and on SDR

[2018-10-29 08:45:36] good.win.alexs : and they should be on proper places )))

[2018-10-29 08:46:30] good.win.alexs : i was looking for ways for hardware mod (for amp power) inside of RC when i found issue with thermal pad

[2018-10-29 08:47:12] good.win.alexs : but, there is “secret” skyworks - it is LTE version, so all information is not public and most probably distributed with NDA to customers

[2018-10-29 08:47:44] good.win.alexs : and power level is controlled by UART or I2C connection. nothing like simple voltage levels or enable pins

[2018-10-29 08:47:53] good.win.alexs : it’s smart IC

[2018-10-30 08:45:42] webmaster : small typo on <https://nolimitdronez.com> -> Lifetime Customer Support nld.web.feature_list.lifetime_support..text

[2018-10-30 08:46:01] coldflake : Ouch!

[2018-10-30 08:46:29] coldflake : Thanks, we are changing all the text from being static to be strings in the database...for easy translation into other languages

[2018-10-30 08:46:42] coldflake : including the app btw :slightly_smiling_face:

[2018-10-30 08:46:55] webmaster : I see, cool stuff! No problem :slightly_smiling_face:

[2018-10-30 08:50:42] coldflake : Fixed, and thanks for letting us know :slightly_smiling_face:

[2018-10-30 09:07:05] webmaster : :+1:

[2018-10-31 01:08:10] ki4gyw : It would be nice to allow patching of sdks for frequency and power settings out of the norm.

[2018-10-31 01:38:04] mefisto : I doubt it's a matter of SDKs; at least on Lightbridge, output power (or rather attenuation of the RF signal) is stored within the firmware. This is probably the case for newer platforms too, because even producing new revision of a board, with differently traced paths for RF signal, may influence RF power and require different base value. Lightbridge attenuation levels can be exported and edited with 'lightbridge_stm32_hardcoder.py', btw.

[2018-10-31 19:51:36] abdo054 : Any news on the FC patcher update?

[2018-11-02 08:52:12] cantrepeat : wish list - move both the here and google map keys to og_settings > keys.settings.json file for ease of user update /hi5

[2018-11-02 09:52:08] cs2000 : @abdo054 Not wanting to speak out of turn (im not the developer, @coldflake is), but it may come as a nice Christmas present :slightly_smiling_face: :gift:

[2018-11-02 09:52:26] cs2000 : @catalinaskirace can you stick that on the forum? Thers a wish list section on there :slightly_smiling_face:

[2018-11-02 10:02:41] cantrepeat : @cs2000 done

[2018-11-02 10:03:03] cs2000 : Appreciate it mate :slightly_smiling_face: thanks. Sure it wont be a difficult task

[2018-11-02 20:16:25] abdo054 : What a nice Christmas present it would be! Thanks @cs2000

[2018-11-04 23:22:42] abdo054 : @cs2000 according to the latest blog post we're supposed to get an update today!

[2018-11-05 05:06:25] abdo054 : I guess not:pensive:

[2018-11-05 10:37:06] cs2000 : Yeah, one was supposed to come out, lemme check whats going on

[2018-11-05 11:19:39] cs2000 : @abdo054 should be out tonight

[2018-11-05 11:19:46] cs2000 : (Eastern europe time)

[2018-11-05 11:38:50] mefisto : _"Waiting for tonight, oh ooh"_

[2018-11-05 11:41:10] coldflake : @mefisto try keeping your shorts clean despite the wait, lol

[2018-11-05 21:35:42] tommiboost : I'm still waiting on custom firmware that was due beginning of October

[2018-11-05 21:45:30] quad808 : It will be released when it's ready. No sooner.

[2018-11-05 22:40:05] cantrepeat : ETASon!!!

[2018-11-08 11:55:05] webmaster : New NLD version without Assistant dependency already released?

[2018-11-08 17:36:46] c.binetti : Hey guys, if you need support on the german translation of nld please just let me know. Would like to give something back to community :slightly_smiling_face:

[2018-11-08 17:55:14] coldflake : Hello guys

[2018-11-08 17:55:25] coldflake : @c.binetti that sounds awesome

[2018-11-08 17:55:40] coldflake : Have you sent a ticket on support?

[2018-11-08 17:57:19] coldflake : @webmaster No, not yet. We have a huuuuge Xmas surprise up our sleeve and that kind of delayed the mentioned release until Friday evening, perhaps even Saturday.

[2018-11-08 17:57:40] cantrepeat : @c.binetti I've got some german porn I'd like to get translated to english if you have time. :smile:

[2018-11-08 17:57:48] coldflake : lol

[2018-11-08 17:58:03] webmaster : Thank you coldflake! Getting excited :slightly_smiling_face:

[2018-11-08 17:59:04] c.binetti : @coldflake no I did not, should I to get in touch with u?

[2018-11-08 17:59:42] c.binetti : @catalinaskirace Hmmm, maybe my german is not good enough but I think it will start with ahhh ahhh and end with uhhhh yeah :wink:

[2018-11-08 18:00:06] coldflake : You can always get in touch we me here but I am not organizing the transportation

[2018-11-08 18:00:39] coldflake : And I am a little stressed out atm so I have a short term memory like a Swiss cheese lol

[2018-11-08 18:01:06] c.binetti : haha sounds good. I am from Switzerland and we love cheese :smile:

[2018-11-08 18:01:24] coldflake : Being Danish, I know some phrases from German porn movies lol

[2018-11-08 18:02:17] c.binetti : Like: is this corn? why do you wear a mask? why u dont suck my dick? ^^

[2018-11-08 18:02:38] cantrepeat : oh man that's gross!!!

[2018-11-08 18:03:02] c.binetti : <https://www.youtube.com/watch?v=19K3EhUln4k>

[2018-11-08 18:03:06] c.binetti : :smile:

[2018-11-08 18:03:07] cantrepeat : and I was eating lunch

[2018-11-08 18:04:38] c.binetti : translation: This is the electric board we have problems with. Ok but why there is corn here? I dont know but why u are wearing a mask? Ok so u just can suck my dick

[2018-11-08 18:07:38] cantrepeat : I think I might have broke ~nld

[2018-11-08 18:08:27] coldflake : @catalinaskirace in what way?

[2018-11-08 18:09:12] c.binetti : hahah because he asked pr0n questions and i have answered i think :wink:

[2018-11-08 18:09:30] coldflake : lol

[2018-11-08 18:10:09] cantrepeat : Be careful what you wish for, you might just get it

[2018-11-08 18:10:49] c.binetti : maybe u just get was u deserve :wink:

[2018-11-08 18:11:09] cantrepeat : indeed I did

[2018-11-09 06:36:45] trollspeed : Khm. If you need i can add russian l10n's :)

[2018-11-15 22:03:30] tommiboost : Nld updates?

[2018-11-16 10:32:10] cs2000 : @coldflake is working on the assistant 2 less update still i beleive. if thats what you're asking about?

[2018-11-16 10:40:43] tommiboost : Custom firmware that's the update I'm waiting for

[2018-11-16 10:45:18] tommiboost : And a nld app with working maps.

[2018-11-16 10:49:09] cs2000 : Custom firmware and some other tricks hopefully by Xmas

[2018-11-16 10:49:22] cs2000 : maps, is a workaround you have to apply

[2018-11-16 10:50:12] cs2000 : Close NLD GO. Go to Apps and force stop NLD GO. Put your device in airplane mode and change the year to 2017 or below. Run NLD GO again. You should have HERE maps back again, and if you had downloaded offline maps, you can continue to use them. Currently, downloading of offline maps is not working, even with the date change. Download will freeze.

[2018-11-16 10:50:26] coldflake : Maps will be fixed soon but until then the process is as @cs2000 is outlining

[2018-11-16 10:51:40] coldflake : The long awaited update is being tested and I am confident that we finally will be able to release it today

[2018-11-16 11:05:57] cantrepeat : Soon™ ETAson®

[2018-11-16 11:48:58] tommiboost : @coldflake what will this update include?

[2018-11-16 16:07:04] coldflake : It will mainly include that assistant is no longer annoying all over the place

[2018-11-16 16:07:23] coldflake : And it's much faster in terms of communication with the bird

[2018-11-16 16:07:54] coldflake : There is also a better way for advising people on how to handle firmware mismatch

[2018-11-16 16:08:39] coldflake : And finally the flashing loop they occurred on birds that repeatedly fail to flash a certain module has also been taken care of

[2018-11-16 16:09:10] coldflake : A few acces violations has been weeded out as well

[2018-11-16 16:09:37] coldflake : Overall it's a much more solid product and I just wish that I had done this sooner

[2018-11-16 16:10:01] coldflake : People can just have the latest assistant installed and nld don't care at all

[2018-11-16 16:10:36] coldflake : No more assistant version conflicts leading people to indtaling/uninstalling old and new assistant in one endless cycle

[2018-11-16 16:13:17] coldflake : But much more exciting news is that NLD will come out as V2 in mid December

[2018-11-16 16:13:42] coldflake : Until then there will be a spree of regular updates as we are running both projects in parallel

[2018-11-16 17:49:11] tommiboost : So still no custom firmware in this release then?

[2018-11-16 17:59:31] coldflake : It will be either custom FC or M2 that will be the big thing in V2 that comes out just before Xmas

[2018-11-16 18:32:29] tommiboost : Custom firmware please

[2018-11-16 18:48:02] cantrepeat : @coldflake keys to json file too pls

[2018-11-16 19:31:57] quad808 : Can you make it blend too?

[2018-11-16 19:32:14] quad808 : Oh yah, and play Quake

[2018-11-16 19:32:25] webmaster : will it run crysis?

[2018-11-16 19:32:39] quad808 : Fry Cry, yes, crysis, no...LOL

[2018-11-16 19:32:55] quad808 : It chokes on Red Dead

[2018-11-16 19:49:00] cantrepeat : Castle Wolfenstein ROM built in pls

[2018-11-16 19:50:22] quad808 : dude...showing your age...

[2018-11-16 19:50:43] quad808 : DOOM shareware was the shit

[2018-11-16 20:06:36] cantrepeat : Yeah, I’m up there. Doom shareware, get the first 3 levels free, then pay John Carmack for the next 6

[2018-11-16 20:08:29] cantrepeat : id software, said he’d check into a hotel to code because the office was too much of a party.

[2018-11-16 21:15:13] coldflake : Hmmm that somewhat sounds familiar here at nld lol

[2018-11-16 21:22:58] chipmangini : @coldflake Nice work on the [nolimitdronez.com](http://nolimitdronez.com) site. Much improved all around..:+1:

[2018-11-16 22:38:09] coldflake : @chipmangini Thank you for that!

[2018-11-17 19:20:35] abdo054 : @coldflake Will you guys post it on the blog once it's released?

[2018-11-17 20:36:27] chipmangini : From FaceBook: <https://www.facebook.com/groups/DJIModdingLounge/?multi_permalinks=2038316333126228&notif_id=1542453158796297&notif_t=group_highlights>

[2018-11-17 20:37:04] chipmangini : " Ruiz David Yesterday at 3:08 PM For the french people! Final Version 1.0 of the DJI GO NLD application for ANDROID translated into FRENCH ... FCC - False connection (not to say "Fake login") - Galileo ... Thanks to all the contributors who will find their name in the conditions of use of the application. This version has been tested and works with 2 versions, one for tablet and one for smartphone. The project team: PCath Pro, Teddy DS, Ruiz David, Dave Pro, register on the group Mavic Free Fly France for profit"

[2018-11-17 20:37:26] chipmangini : What's wrong with people?

[2018-11-17 20:48:06] good.win.alexs : btw, on NLD site - password restoration is not working

[2018-11-17 20:48:13] good.win.alexs : @coldflake

[2018-11-17 20:49:04] good.win.alexs : i mean it’s not working as expected

[2018-11-17 20:49:24] good.win.alexs : not being registered - it is not complaining that account is not existing :slightly_smiling_face:

[2018-11-17 20:49:39] good.win.alexs : just showing always same form to re-enter email

[2018-11-17 20:50:32] coldflake : Ok, thanks for letting me know, I will check it out

[2018-11-17 20:50:50] coldflake : BTW, the new release 1.8.0.0 is out!

[2018-11-17 20:52:18] good.win.alexs : also, after registering - it is not showing my past order

[2018-11-17 20:52:24] good.win.alexs : that i bought license

[2018-11-17 20:52:26] good.win.alexs : :slightly_smiling_face:

[2018-11-17 21:28:30] cantrepeat : #patchnotes

[2018-11-17 21:45:07] coldflake : @good.win.alexs open a support ticket with your order info and the username that you created and I will assign your order to your user

[2018-11-17 22:01:25] cantrepeat : @coldflake hey, can you increase char per post in the forums by say 150 more? I need to edit the CS rooting post.

[2018-11-17 22:21:01] coldflake : Yes sure

[2018-11-17 22:30:12] coldflake : @catalinaskirace Done :slightly_smiling_face:

[2018-11-17 22:31:30] cantrepeat : #hero

[2018-11-17 22:31:42] coldflake : @abdo054 Yes..well, it is out now but I haven't had the time yet to do the blog post and the change log

[2018-11-17 22:37:25] abdo054 : @coldflake thanks

[2018-11-18 09:00:28] flymymavic : Looking forward to trying out the new version today.

[2018-11-18 11:07:20] mstranger : changelog for new NLD ?

[2018-11-18 11:15:53] cantrepeat : <https://nolimitdronez.com/nld-mod-client-1800>

[2018-11-18 11:49:06] d95gas : @coldflake Minor type (I hope): Stange Access Violation.... Should that read "Strange" :slightly_smiling_face: I know its nit picking, but it was bugging me

[2018-11-18 11:49:34] d95gas : If I were you I would just blame "Quad808" :grinning:

[2018-11-18 11:57:38] cantrepeat : I hate when I get a stange violation!!

[2018-11-18 12:09:09] d95gas : :+1:

[2018-11-18 13:09:12] chipmangini : @coldflake Running Windows 10 64, I get these dialog boxes that can't be dismissed after closing the NLD app. I had to force quit NLD to dismiss them:

[2018-11-18 13:09:26] chipmangini :

[2018-11-18 13:10:14] chipmangini : I have nldapp.DMP file if you need...

[2018-11-18 13:44:51] cantrepeat : I'm getting the same kind of error is I try to close NLD client with the bird still connected. However, if disconnect the USB cable and then close the client it exits fine.

[2018-11-18 13:45:13] cantrepeat : ^^ win10/64 pro

[2018-11-18 13:46:22] cantrepeat : win10 version 1803 build 17134.407

[2018-11-18 13:56:22] chipmangini : @catalinaskirace It happens on mine with no drone connected. UPDATE, it only happened once, the first time I ran it on this computer. Never saw the errors again, even after a restart., but don't have my bird with me to check if it errors then. Stay tuned...

[2018-11-18 14:03:50] cantrepeat : yeah, happens to me with the drone connected, if I disconnect the bird before closing the client I do not get the error

[2018-11-18 18:07:03] quad808 : @coldflake thought he had that "bug" squished, but guess not. I could be an Apple fanboi and just tell you that you are using NLD wrong. :rolling_on_the_floor_laughing:

[2018-11-18 18:52:51] chipmangini : @quad808 LOL!

[2018-11-18 19:31:28] flymymavic : Liking the new no need for assistant version, still would like the ability to resize the window and the text, my old eyes aint what they used to be, still notice that the boxes for quick parameter changes such as disable wind warnings still dont work, would like to see that issue get fixed

[2018-11-18 19:33:40] flymymavic : oops spoke to soon, tried to exit with the quad connected and got a couple of boxes pop up and then this which wont go away

[2018-11-18 19:39:24] flymymavic : win 7 64 bit, does the same with or without the bird connected when closing it down

[2018-11-18 19:47:05] flymymavic : is there anyway to stop the autoupdater from updating earlier versions, im trying to get a baseline

[2018-11-18 21:24:16] chipmangini : Does anyone know if the new NLD v18 has the maps working correctly?

[2018-11-19 05:54:46] d95gas : Using W10 1809 - Run as admin, get the pop-up's when closing NLD down.

[2018-11-19 09:51:06] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.8.0.0 Do Not Request Support Here* use [support.nolimitdronez.com](http://support.nolimitdronez.com)

[2018-11-19 09:55:24] cs2000 : @chipmangini no that wasnt fixed @flymymavic Disable your network adaptor/wifi so your machine has no live internet connection and it wont update SO just to clarify, the access violation thing only appears when you close the app with the drone still connected via USB?

[2018-11-19 10:07:21] cantrepeat : I'll test it again

[2018-11-19 10:11:45] cantrepeat : well, now it crashes regardless of connect or disconnected drone.

[2018-11-19 10:17:19] cs2000 : :joy:...i shouldnt laugh

[2018-11-19 10:17:32] cs2000 : it works OK for me (but i dont have a drone with me, im ar "work")

[2018-11-19 10:18:44] flymymavic : Tried that and NLD won’t start up at all, and it crashes out irregardless of quad plugged or unplugged, I was trying to use an old version but NLD just updates irregardless

[2018-11-19 10:30:40] cantrepeat : crashing even I never connect a drone to the PC, just open and close the client = crash

[2018-11-19 10:35:48] cs2000 : Try a fresh download mate. Delete the app from your desktop and grab a fresh copy from the website

[2018-11-19 10:38:18] cantrepeat : ok

[2018-11-19 10:38:56] cs2000 : Coldflake is aware and will be investigating it today too for what its worth

[2018-11-19 10:39:08] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.8.0.0

[2018-11-19 10:40:30] cantrepeat : does the client have an uninstall feature? Or should I just delete the entire folder

[2018-11-19 10:40:44] cs2000 : Just delete it, its never "installed" as such :slightly_smiling_face:

[2018-11-19 10:45:03] cantrepeat : yup happens with new DL

[2018-11-19 10:47:58] cs2000 : crap, ok

[2018-11-19 10:52:15] chipmangini : @cs2000 FWIW, it the same thing happened to me, but only the first time I started/shut down the app. I haven't seen it since, but haven't connected my bird yet. I will report back when I do!

[2018-11-19 17:38:02] quad808 : Guys....face it. You are using it wrong. Get with the program!

[2018-11-19 17:43:35] cantrepeat : Must be a repack by Droneuser :smile:

[2018-11-25 21:05:41] chipmangini : @cs2000 I just used the latest NLD app (computer side) on my P4P to upgrade the firmware from V01.05.0300, to V01.05.0600. I had the bird connected to the computer, and the controller linked and on. All went well, except when I went and opened DJIGo 4, it gives me "cannont take of, version mismatch". I tried to downgrade back to V01.05.0300, and that went fine, but still same thing with mismatched versions. Then I tried using the latest DJI Assistant up and down with no change either. Do you have any idea what I can do to get this to fly again?

[2018-11-25 21:19:21] cantrepeat : Flash with dumldore ??

[2018-11-25 22:17:54] chipmangini : @catalinaskirace Good Idea I'll try that next, but doesn't the NLD app use Dumldore>

[2018-11-25 22:45:10] cantrepeat : yes, a different version made for NLD. Might try 3.07

[2018-11-25 22:45:37] cantrepeat : try flashing back to a firmware that you know works with 3.07

[2018-11-26 09:34:05] cs2000 : @chipmangini sorry was busy working on the car all weekend. Try to not up and downgrade to fix that, just flash the same firmware again.

[2018-11-26 09:35:15] cs2000 : NLD does in-fact use DUMLdore to do its flashing, just a GUI-less version, but the same thing can happen with that too :slightly_smiling_face: Using it "raw" (for want of a better word) does eliminate some variables though and is a troubleshooting step Quad and i often use

[2018-11-26 10:59:40] chipmangini : @cs2000 Thanks, I got it to fly by downgrading, but at one time it was on 1.05.0600 (latest) so I know it runs on my bird. I'll try again this week.

[2018-11-30 11:11:39] chipmangini : @quad808 Any idea whats up with [multicopterpilots.com](http://multicopterpilots.com)? Unreachable for a few days now...

[2018-11-30 13:07:08] d95gas : Yes seems to be totally offline, wondering if their cert has expired or hosting fees issues

[2018-11-30 13:58:04] cantrepeat : hacked?

[2018-11-30 14:01:38] d95gas : Hmmmmm now there's a thought

[2018-11-30 14:02:30] cantrepeat : yeah, probably not. If it was hacked then test test test would probably be pwnd pwnd pwnd by 1337 group bla bla bla, all your servers are belong to us. lol

[2018-11-30 17:54:05] quad808 : @chipmangini No idea

[2018-11-30 18:03:07] d95gas : Just messaged Frank on the other forum, see if he comes back with any info. I sure hope everything is ok with him.

[2018-11-30 21:45:20] chipmangini : @d95gas I was thinking the same thing......

[2018-12-03 14:35:58] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.8.0.1

[2018-12-03 16:31:47] d95gas : @quad808 Left messages for Frank in various forums..... dont do facebook so cannot do that one, but well over a week now and not a single word. I really hope he is ok.

[2018-12-03 16:41:36] cantrepeat : Still getting client error on ext with 1.8.0.1

[2018-12-03 18:41:08] djire : Hey gang. FYI the Here API key included with 4.1.14 is bad. I had to get my own key and mod the NLD GO APK to get the maps to work.

[2018-12-03 19:15:40] quad808 : Yep. Thats DJI's key that they didn't' renew.

[2018-12-08 19:17:43] mstalzer : hey NLD folks - are you going to add in the latest I2 firmwares for NFZ?

[2018-12-09 07:21:07] coldflake : Hello

[2018-12-09 07:21:32] coldflake : Yep sure, thanks for the heads up, I will put it on the to do list

[2018-12-12 11:12:48] cantrepeat : @coldflake hey when you get time can you add the ability to turn off PMs in the NLD forums.

[2018-12-12 11:28:12] coldflake : Hello, yes I will look into it. Is someone spamming you?

[2018-12-12 11:33:48] cantrepeat : just howto questions that should be asked in the forums is all. I asked them to post in the forums so others could see the question, offer help and what not.

[2018-12-19 05:30:18] flyingkite : Hey all, It's been a while since I played around with NLD. Anyway, I just plugged in my spark which is on .900 and noticed when I click flight controller and look under "other" that I'm able to check disable altitude limit but disable NFZ is greyed out. Based on the birdmap at NLD website, it should be the opposite. Has anyone on this same firmware noticed this? Just curious.

[2018-12-19 16:49:25] cantrepeat : lol @coldflake seems you have a new user on the forums!! <https://nolimitdronez.com/boards/topic/121/want-to-meet-good-men>

[2018-12-19 16:52:28] coldflake : @catalinaskirace lol yeah looks like we are attracting hot young Russian girls now, can you imagine?

[2018-12-19 16:56:20] cantrepeat : sweet, need to up my forum game for some hotties

[2018-12-19 16:56:48] cantrepeat : unlock my drone and my swinger game for the same price!

[2018-12-19 16:58:23] coldflake : sorry, I weeded the place for Skanky Russian Ho's lol

[2018-12-19 17:00:59] cs2000 : i was just on it, you beat me too it lol

[2018-12-19 17:08:01] cantrepeat : damn, now the only hook up I have is my NLD client!

[2018-12-19 17:08:22] cantrepeat : was so gonna ask her out

[2018-12-19 17:08:43] cantrepeat : maybe the wife will let me have a "nanny" lol

[2018-12-19 22:34:12] chipmangini : Yeah, I saw that this morning and was wondering...

[2018-12-20 14:16:02] david077 : Anyone know any good repair shops in Florida?

[2018-12-20 18:26:03] webmaster : Been logging in to continue translating NLD, but when hitting translate, an empty table shows up :dizzy_face: Tried relogging in, disabling cache and refresh, Logging in on smartphone, etc. Any idea why?

[2018-12-20 18:27:14] webmaster : Empty table = No english presets, no empty fields, an no strings shown, just the titles of the columns above

[2018-12-21 09:27:04] cs2000 : @coldflake ^^

[2018-12-21 10:10:52] coldflake : That is because everything that currently can be translated has been translated

[2018-12-21 10:11:51] coldflake : We will launch multi languages very soon. As soon as we have completed the bounty program we will do it.

[2018-12-21 12:19:47] webmaster : Ahh, alright:+1:

[2018-12-22 12:32:50] cantrepeat : quick question, does 01.04.0300 require and internal SD card? I thought is was no longer needed on that FW.

[2018-12-22 12:33:18] cantrepeat : MPP bird

[2018-12-22 13:00:33] good.win.alexs : No, 01.04 branch works w/o internal card

[2018-12-22 13:01:09] good.win.alexs : Even more it's not writing anything to it, and this is sad

[2018-12-22 13:05:14] cantrepeat : That's what I thought I had read

[2018-12-23 13:12:42] cantrepeat : Probably need to update the apk guide on the website to include 4.1.22 info

[2018-12-30 15:20:52] trollspeed : Is anybody from nld in here? Still [trying.to](http://trying.to) connect nld mod client to ma with no result

[2018-12-30 15:21:43] trollspeed :

[2018-12-30 15:25:20] d95gas : One of the guys are usually around, hang tight and hopefully quad808 or one of the team will be along to help

[2018-12-30 15:25:50] d95gas : have you tried putting a support ticket in on the NLD site ..... I think Quad808 gets an indicator when you submit

[2018-12-30 22:22:32] trollspeed : Well old known problem, ned tp dp spme magic fo reuse it :/ don't remember what do i have to do )))

[2018-12-31 10:33:44] cs2000 : Silly question @trollspeed but does the drone actually get picked up by assistant 2? As in, just close NLD, fire up the latest Assistant 2 and does it appear? Could be one of a couple of things

[2018-12-31 14:09:27] trollspeed : Assistant 2 works properly

[2019-01-03 12:59:02] trollspeed : Hello?

[2019-01-03 13:21:31] chipmangini : Hello!

[2019-01-03 17:38:19] quad808 : H E L L O ANYBHADEE DERE?

[2019-01-03 18:29:12] cantrepeat : New phone, who dis

[2019-01-03 19:05:22] quad808 : Crickets. Stupid NLD.

[2019-01-03 20:17:24] chipmangini : I'm her to listen to the crickets......:stuck_out_tongue_winking_eye:

[2019-01-03 20:24:42] cantrepeat : I'm going fishing tomorrow morning so I need some crickets too.

[2019-01-03 21:09:31] chipmangini : @catalinaskirace Sorry, I sold them all to @trollspeed.......:zany_face:

[2019-01-05 17:57:30] ben_lin : So whens the NLD for M2 coming? Do we have a timeline for that? The 1.8.0.2 update says This month is when the magic are gonna start happening

[2019-01-05 17:57:43] ben_lin : @coldflake I am very curious.

[2019-01-05 17:58:00] ben_lin : Want to give NLD more money lol

[2019-01-05 18:16:43] coldflake : @ben_lin yes that is correct, magic is starting to happen this month :)

[2019-01-05 18:17:07] coldflake : We are also launching the bounty program this week, it will be a blast

[2019-01-05 18:17:32] coldflake : And make people who are in the knows come out of the woodwork

[2019-01-05 18:29:09] ben_lin : Well, surly the “magic” can’t be anything else other than the M2…

[2019-01-05 18:29:20] ben_lin : That bird is such a beast

[2019-01-05 18:29:39] ben_lin : Especially if the enterprise version can be fully unlocked

[2019-01-05 18:30:05] ben_lin : Then there should be quite some commercial customers

[2019-01-05 22:21:12] tommiboost : Still waiting for custom firmware

[2019-01-07 09:15:37] cs2000 : @tommiboost forget custom firmware, its old hat now. Fully unlocked FC is where the true magic lays. Gives all the benefits of custom firmware without any of the drawbacks. That will be coming to NLD, but @coldflake is focused on getting the bounty thing wrapped up so we can (hopefully) make some swift progress on M2/air stuff. We have a few players who are close, but all seem to need one or two more exploits to get a complete root and exploit.

[2019-01-07 09:22:29] tommiboost : @cs2000 so when can we expect full unlock of th FC?

[2019-01-07 09:26:47] cs2000 : I dont have a date for you mate, more that i dont wanna promise something that then gets let down. We have been playing with custom FC since...July maybe, but time to integrate it into NLD is just tight. Behind the scenes, NLD is a lot bigger than just the app you see in front of you right now and time management is difficult. It is 100% coming however.

[2019-01-07 09:27:07] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.8.0.2

[2019-01-07 10:50:55] kilrah : I think that's what he was talking of, custom FC firmware.

[2019-01-07 13:27:43] coldflake : We are releasing the bounty program within a couple of days. When that has been released we will go back and fix some known bugs in the app, change the way firmware flashing are being done and introduce custom FC

[2019-01-07 13:29:04] coldflake : As @cs2000 mentioned, M2 is very close to be fully unlocked, however, there is still a few things that needs to be worked on before we can put it into an automated process

[2019-01-08 08:44:36] ben_lin : I am curious about the NLD GO App for M2

[2019-01-08 08:45:28] ben_lin : Did you guys break secneo or managed to get sth done on iOS?

[2019-01-08 08:46:09] ben_lin : Because if M2 NFZ/Height restriction are to be unlocked, sth has to be done for the GO app

[2019-01-08 08:47:17] ben_lin : @coldflake

[2019-01-08 08:52:46] ben_lin : Also please release the translated sites together with the M2 stuff

[2019-01-08 08:53:12] ben_lin : I know at least 3 DJI resellers that are waiting on this

[2019-01-08 09:07:09] coldflake : @ben_lin I'll pm you

[2019-01-09 03:16:00] mrbracht : Not going to lie. I'm excited about unlocking the M2. :relaxed:

[2019-01-09 03:18:26] lolo780 : I think a lot of people are.

[2019-01-09 10:02:13] ben_lin : We all are.

[2019-01-09 15:02:48] trollspeed : And i'm exited ro get latest version of nld to work with my air :)))

[2019-01-09 17:12:11] cs2000 : Hehe good, keep that excitement coming!

[2019-01-09 17:28:11] mrbracht : My wallet is waiting! Lol

[2019-01-10 18:29:25] trollspeed : Well i've used it preciously baought activation bode and it doesn't work again :)))

[2019-01-10 20:56:19] flyingkite : Question for the NLD folks. I am planning to sell my mavic pro in a few weeks and I have an NLD license for it. I don't want to transfer the NLD license over to the potential new owner but rather have the new owner purchase a license to support NLD. When the time comes, can I just open a ticket at NLD and request the license key to be revoked from the Mavic so that new owner if interested can get his/her own license?

[2019-01-10 21:02:34] quad808 : Yes, absolutely.

[2019-01-10 21:04:26] flyingkite : Awesome! Thanks Quad.

[2019-01-11 15:26:49] coldflake : Just around the corner....

[2019-01-11 15:27:32] cs2000 : hehe @coldflake, ever the tease :wink:

[2019-01-11 15:34:16] coldflake : lol yeah we are so close now that teasing is ok ;)

[2019-01-11 16:36:28] lolo780 : Removing the Occusync distance limit would be great.

[2019-01-11 16:49:22] cs2000 : moar boosters (right?)

[2019-01-11 17:22:01] kilrah : he's talking of the "virtual wall"

[2019-01-12 04:22:20] ben_lin : oh boi

[2019-01-12 11:31:33] ben_lin : First thing OGs do when a new drone is in the house: looks for the USB port

[2019-01-12 11:31:57] ben_lin : Doesn’t even bother to install the props

[2019-01-12 23:15:23] joker_x3 : Question to the latest NLD DJI go client: The offline map download isn’t working. It is showing an error that I’m not connected to a network despite I am. Is there a possibility to enable offline maps?

[2019-01-13 11:41:36] amanita : @joker_x3 I use NLD 1.8.0.2 to patched DJI GO 4 4.1.22 and the offline map download is working fine.

[2019-01-13 11:55:25] joker_x3 : Thanks for your reply @amanita , I did the same and for me it’s not. I’m using LinageOS 15.1 Android 8.1 with a Redmi Note 4...

[2019-01-13 12:01:46] amanita : @joker_x3 I am on Android 6 with Samsung galagy J7 and Android 6 tablet Nvidia Shield K1, both works fine and i can download Here maps.

[2019-01-13 12:02:12] kilrah : isn't a lot of google stuff stripped away in lineageos? Probably some stuff required for maps is missing

[2019-01-13 12:38:13] joker_x3 : Thanks @kilrah , maybe that is the point. I will have a look. Is it possible to use Here Maps and also offline?

[2019-01-13 12:47:00] amanita : @joker_x3 Yes, this is why we download Here maps, to use them offline.:wink:

[2019-01-13 12:47:42] joker_x3 : @amanita Tell me the full truth please :blush:

[2019-01-16 10:59:20] coldflake : <https://nolimitdronez.com/bounty>

[2019-01-17 11:23:37] chipmangini : @coldflake I can't reach - <https://nolimitdronez.com/>

[2019-01-17 11:49:55] amanita : Me too, <https://nolimitdronez.com/> is down.

[2019-01-17 12:22:13] coldflake : Yes I just noticed, looking into it now

[2019-01-17 12:22:45] coldflake : Just woke up 5.mins ago

[2019-01-17 12:23:04] coldflake : Looks like it had been down for 3 hours or so

[2019-01-17 13:15:46] coldflake : Ok, we forgot to pay the TV bill for the office which in turn runs through the same fiber as our on perimises data center. The fiber provider made a mistake taking the whole connection down instead of just barring the TV stream. It slipped our radar because we don't give shit about the TV as we have never time for watching it anyways lol

[2019-01-17 13:36:15] coldflake : Problem solved and back online

[2019-01-17 13:58:08] cantrepeat : crash seems fixed in 1.8.0.2

[2019-01-17 17:00:17] joker_x3 : For me the download of offline maps with Go4 NLD build with NLD 1.8.0.2 still doesn’t work. The app takes 10 seconds with message „acquiring offline city list“ ... than it says „network unavailable“ despite it is. One thing I noticed: I can’t choose any mod options in 1.8.0.2 because like a hint within the program says „all options are selected and can’t be changed in this release“. In the las position „use google maps“ is checked. Is that the problem?

[2019-01-17 17:23:29] joker_x3 : @amanita @kilrah

[2019-01-17 17:51:18] quad808 : @joker_x3 You need to do a complete uninstall of your NLD GO, and patch a new one. Install in airplane mode, use "a" for user(or whatever) and 'b" for password. After initial install, run it once in airplane mode. Then force stop it, restart your device - just because, then allow data and HERE maps will work.

[2019-01-17 18:07:19] joker_x3 : @quad808 did all the steps and it was the SAME THING AGAIN. After all the steps and the first disappointment I again forced close the app and reopened it. Then it magically worked!! @kilrah @amanita

[2019-01-17 18:07:38] joker_x3 : Thanks a lot @quad808

[2019-01-18 15:45:46] buuddy : Does buying/using NLD interfere with (or include)the silent rc hack?

[2019-01-18 15:49:52] cantrepeat : no it does not

[2019-01-18 15:52:09] cantrepeat : SilencioRC- is a stand alone tool

[2019-01-18 15:56:34] buuddy : Thanks

[2019-01-18 16:25:56] cantrepeat : well worth price!! I can't imagine flying with out it.

[2019-01-18 19:49:58] lolo780 : I bumped the M2 bounty up to $4000

[2019-01-18 20:18:39] webmaster : Would love to see a "fresh nosecneo APK" bounty up there.

[2019-01-19 14:30:10] coldflake : @webmaster feel free to describe the secneo bounty and I will put it up asap

[2019-01-19 14:30:40] coldflake : I just have been busy launching the new multilingual site for the last couple of days

[2019-01-19 14:31:11] coldflake : Nld in Chinese is about to see the dawn of day lol

[2019-01-19 14:32:03] coldflake : To begin with its only the website, after thst the NLD mod client and finally the Go app

[2019-01-19 20:44:12] webmaster : Something along the lines: "Fully deobfuscate a fresh Android APK of Version 4.3.X or higher, so that patches can be applied, and rolled out via NLD."

[2019-01-20 15:47:28] buuddy : From reading the _birdmap_ here - <https://nolimitdronez.com/birdmap> - I can see what is supported on what firmware version. Is there a page that explains what Normal+ and RangeBoost are? Does Rangeboost include what i think is called Boost, the 1.5w transmit hack?

[2019-01-20 17:46:36] cantrepeat : Right under range boost it says FCC Mode

[2019-01-20 17:59:10] lolo780 : Jay: what are you flying? Boost mode is for occusync

[2019-01-20 20:20:00] buuddy : @lowellfoo780 mavic pro

[2019-01-20 20:57:51] edisonbattery : [dji.retroroms.info](http://dji.retroroms.info) is down now

[2019-01-20 21:09:36] chipmangini : @edisonbattery Working here from the US...

[2019-01-20 21:14:37] edisonbattery : i switched over to tether off my phone and now im on

[2019-01-20 21:15:18] edisonbattery : spoke too soon, was cached. nslookup says their www server is 203.26.211.104 and i get no response from that ip

[2019-01-20 21:20:39] edisonbattery : *Tracing route to [server.retroroms.net](http://server.retroroms.net) [203.26.211.104] over a maximum of 30 hops: 1 <1 ms 1 ms 1 ms 192.168.0.1 2 22 ms 21 ms 45 ms 96.120.36.97 3 25 ms 16 ms 18 ms 162.151.102.237 4 12 ms 11 ms 11 ms 96.108.23.102 5 77 ms 96 ms 15 ms [be-114-ar01.northdade.fl.pompano.comcast.net](http://be-114-ar01.northdade.fl.pompano.comcast.net) [69.139.183.201] 6 28 ms 26 ms 18 ms [be-20214-cr02.miami.fl.ibone.comcast.net](http://be-20214-cr02.miami.fl.ibone.comcast.net) [68.86.90.205] 7 18 ms 11 ms 10 ms [be-12274-pe01.nota.fl.ibone.comcast.net](http://be-12274-pe01.nota.fl.ibone.comcast.net) [68.86.82.154] 8 42 ms 37 ms 19 ms 50.242.148.158 9 11 ms 11 ms 11 ms 208.67.164.181 10 133 ms 50 ms 71 ms 208.67.164.146 11 * 71 ms 45 ms 208.67.167.58 12 72 ms 45 ms 43 ms 208.67.164.154 13 44 ms 79 ms 48 ms [fplfn.ingress.brdr2.dal1.virtbiz.com](http://fplfn.ingress.brdr2.dal1.virtbiz.com) [204.28.109.106] 14 40 ms 40 ms 42 ms [g4-3.mdf3.dal1.virtbiz.com](http://g4-3.mdf3.dal1.virtbiz.com) [208.80.15.23] 15 54 ms 45 ms 41 ms [virtbiz210.compassnetworks.net.au](http://virtbiz210.compassnetworks.net.au) [208.80.15.210] 16 * * * Request timed out. 17 * * * Request timed out. 18 * * * Request timed out. 19 * * * Request timed out. 20 * * * Request timed out. 21 * * * Request timed out. 22 * * * Request timed out. 23 * * * Request timed out. 24 * * * Request timed out. 25 * * * Request timed out. 26 * * * Request timed out. 27 * * * Request timed out. 28 * * * Request timed out. 29 * * * Request timed out. 30 * * * Request timed out. Trace complete.*

[2019-01-20 21:28:32] chipmangini : @edisonbattery Still working fine from the Eastern US...

[2019-01-20 21:32:13] edisonbattery : You're in MA and i'm in FL, I would really be interested in seeing your tracrt compared to mine. Do you mind posting one?

[2019-01-20 21:55:00] chipmangini : @edisonbattery It times out at 16 62 ms 58 ms 60 ms [virtbiz210.compassnetworks.net.au](http://virtbiz210.compassnetworks.net.au) [208.80.15.210], but You are correct, it's down. Only cached worx....

[2019-01-20 21:57:22] edisonbattery : reminded me of that movie "A Fish Called Wanda". You were making me feel like the character Otto who has an inferiority complex. "....don't call me stupid".

[2019-01-20 22:04:32] chipmangini : I initialy just clicked on the site to navigate to it, but never went any farther. After understanding what you're alluding to i did the teacerout and came up with the same outcome as you did...

[2019-01-20 22:04:45] chipmangini : At lease they know.....

[2019-01-20 22:31:12] chipmangini : @edisonbattery Thanx for the heads up!

[2019-01-20 22:33:24] edisonbattery : Were all in this together pal.

[2019-01-21 00:59:18] czokie : @chipmangini and @edisonbattery - The site is up. Traceroutes are blocked. (We were getting hammered way back). You are reaching the correct place. PM me with a source IP and I'll check it out.

[2019-01-21 01:58:53] cantrepeat : Working on my end in the South East

[2019-01-21 13:45:27] cantrepeat : and +1 for an updated nosec apk bounty

[2019-01-21 18:03:26] wouter : what are people's thoughts on hacking the smart controller for fcc/boost?

[2019-01-21 18:06:51] lolo780 : Good idea

[2019-01-24 10:42:06] dangerm0us : Waiting with anticipation.... contributed to bounty

[2019-01-24 13:02:13] cantrepeat : NLD forums need a clean up, lot's of hot Russian women posting again. :smile:

[2019-01-24 13:56:43] coldflake : I will put it on tonight more or less as you wrote it

[2019-01-24 13:57:05] coldflake : I have been busy finishing up the multilingual release that goes out tonight

[2019-01-24 13:58:37] webmaster : No problem, I was just curious if there's anything left I would have to describe or whatever! :+1:

[2019-01-24 13:58:38] coldflake : If you could try and make the description more detailed it would be cool but otherwise we just go with what we already have mate

[2019-01-24 13:59:34] coldflake : If you have any input to the bounty system itself a description here or there, please let me know

[2019-01-24 14:00:19] webmaster : Yeah, of course!

[2019-01-25 09:15:51] czokie : @catalinaskirace - send em to DZ

[2019-01-25 17:26:54] quad808 : hot women cleaned up...thanks @catalinaskirace for the heads up!!

[2019-01-25 17:28:32] lolo780 : Any good ones?

[2019-01-25 17:55:57] quad808 : nah...bogus Russian posts...hahahaha

[2019-01-25 18:20:16] cantrepeat : lol, someone's on the make for hot Russian women!!

[2019-01-25 18:22:07] cantrepeat : One of my Soldiers married a fat Russian hooker while he was stationed in Korea. Never let him hear the end of that one.

[2019-01-25 19:24:20] buuddy : Dummy question, but I'm about to buy NLD and see that it adds $3 for paypal - I have no issue paying for this, but I just wanted to post here in case someone said 'oh, just do this"...

[2019-01-25 20:10:51] cantrepeat : I purchased a while back and I don't remember anyone mentioning a way around it.

[2019-01-25 20:11:53] cantrepeat : You should pair your NLD purchase with SilencioRC-0.9.3 provided it supports your controller.

[2019-01-25 20:35:19] buuddy : @catalinaskirace I already have SilencioRC-0.9.3 and love it. I'll purchase and flash shortly.

[2019-01-25 20:35:21] buuddy : thx

[2019-01-25 22:05:47] buuddy : I'm using NLD to disable the NFZs. all the latest version on a mavic pro. I was 1.04.400, dowgraded to 1.04.300, went to the remove NFZ tab, it showed the right firmware, and I applied the patch. Patching showed me 1%, 7%, and then 15%. At 15 a box popped up and said successful, the mavic will reboot 3 times [ok]. I hit ok, the mavic didn't reboot at all, and it still says flashing firmware please wait (15%).

[2019-01-25 22:06:34] buuddy : On the bottom right, however, it did reload my info (board/firmware went blank, then showed up again), and it says Ready

[2019-01-25 22:08:27] cantrepeat : I would first flash to 4.0300 twice and reboot the bird each time, then start the NFZ patching.

[2019-01-25 22:09:22] buuddy : Thx. How do I know that the NFZ patch applied successfully? Also, do I have to do anything to the remote (I have the patched apk already in place).

[2019-01-25 22:56:10] cantrepeat : The NFZ are controlled by the app and the bird

[2019-01-25 23:00:10] cantrepeat : I assume you are using a MP1

[2019-01-25 23:00:12] cantrepeat : or MPP

[2019-01-25 23:00:24] cantrepeat : do you have adb setup?

[2019-01-25 23:01:39] buuddy : @catalinaskirace I'm using MP1, and I don't have adb setup. I did get the new patched apk in place, but now i'm having an issue with the mavic not being detected on USB. I think I need to figure that out first.... NLD just says "connect device to USB" now, Prior to today I've never connected a computer to the mavic, so I don't know what the normal state is. In device manager I noticed that when the drone is connected, I have two devices with an ! -- Remote NDIS based internet sharing & Other Devices -> DJI.

[2019-01-25 23:03:23] cantrepeat : I also assume you are using 1.8.0.2

[2019-01-25 23:03:27] buuddy : yes

[2019-01-25 23:04:30] buuddy : I'm going to focus on what I think is a general windows issue more than an NLD/mavic issue. Not a windows guy.

[2019-01-25 23:17:13] cantrepeat : do you have any version of DJI assistant installed?

[2019-01-25 23:18:12] cantrepeat : I'm not sure if 1.8.0.2 installs usb drivers or if it even needs them but they were needed on other versions because NLD client still used assistant. I could be wrong but I think you need the drivers.

[2019-01-25 23:24:23] cantrepeat : but wait you said it connected and you flashed the bird

[2019-01-25 23:38:10] coldflake : god damn it

[2019-01-25 23:38:21] coldflake : weeding out the willing russian women once again

[2019-01-25 23:38:25] cantrepeat : I’m sitting a hot tub so my connection is iffy

[2019-01-25 23:38:36] coldflake : cant have both mate

[2019-01-25 23:38:37] coldflake : lol

[2019-01-25 23:39:25] cantrepeat : Hot russians, connection, wifi lol

[2019-01-25 23:39:42] cantrepeat : Sounds like a drug movie.

[2019-01-26 00:25:55] buuddy : @catalinaskirace even though I was/am having windows problems, I think the patching worked. I'm not 100% clear on how to check, but I do have adb on my mac. Never used dji assistant, if there is a good way to check, pls point me in the right direction.

[2019-01-26 02:13:14] cantrepeat : I was going over my notes and I used sqlite3 to check the nfz.db to make sure airmap_geofence_polygons field was zeros

[2019-01-26 02:19:53] buuddy : I don't know how to connect from the mac to the mavic with adb. I read something about using Assistant but I hadn't yet figured that out.

[2019-01-26 15:06:41] webmaster : <https://nolimitdronez.com/DE> German translation is close to perfect, well done! *Regarding the APK Bounty, please put it up. Cant hold my wallet back anymore, lol

[2019-01-26 23:30:02] quad808 : @buuddy The "reboot" is a soft restart of the flight controller, so you won't hear the chimes. You are good to go...the NFZ patching is pretty quick. Test in a known NFZ with NLD GO 4.1.22 with props off....should be good to go. After the patch, NLD "may" detect you as 01.04.0200 firmware. Nothing to worry about.

[2019-01-27 14:18:23] buuddy : @quad808 thanks. I tested yesterday and it was great. I did notice that I was at 1.04.200 at some point and then I reflashed to .300 and re-applied NFZ.

[2019-01-27 14:19:43] buuddy : Now that I'm using NLD, I'm using an android tablet that I've never used with the mavic before. My new problem is that the tablet is draining the controller battery (not terrible, but not great), and I see there is a workaround if I root the tablet. Is there by any chance a parameter change that would stop the controller charging the tablet?

[2019-01-27 18:20:58] coldflake : @webmaster The German translator is very productive

[2019-01-27 18:21:07] coldflake : German quality and reliability

[2019-01-27 18:21:26] webmaster : true :yum:

[2019-01-27 18:21:44] lolo780 : My BMW is in for warranty repairs.

[2019-01-27 18:21:52] lolo780 : :joy:

[2019-01-27 18:23:03] coldflake : lol

[2019-01-27 18:23:51] coldflake : We have made a translation system so that when we change something in the english verison, it alerts all the translators

[2019-01-27 18:24:06] lolo780 : Awesome!

[2019-01-27 18:24:07] coldflake : they then receive x amount per translation depending on the item that they translate

[2019-01-27 18:24:49] coldflake : If it is not translated instantly AND properly, it is no gain for anyone with multi langugae

[2019-01-27 18:25:10] lolo780 : All your base are belong to us

[2019-01-27 18:25:50] coldflake : mostly west a few asian but after AliPay was introduced, more chineese also came along

[2019-01-27 18:26:26] coldflake : they say that DJI sells as manuy drones inside China as they do rest of the world

[2019-01-27 18:26:32] lolo780 : Wow

[2019-01-27 18:26:41] lolo780 : Untapped market for you guys

[2019-01-27 18:27:03] coldflake : <https://nolimitdronez.com/cn>

[2019-01-27 18:27:34] lolo780 : If the bounty for m2 root is taken, what happens after?

[2019-01-27 18:27:53] coldflake : new bounties will pop up

[2019-01-27 18:28:06] coldflake : Root is basically only the key to the doorway

[2019-01-27 18:28:10] coldflake : then we need all the rest

[2019-01-27 18:28:14] lolo780 : I mean for changing flight controller parameters etc

[2019-01-27 18:28:20] lolo780 : Right

[2019-01-27 18:28:41] coldflake : but we DO expect to be able to do the NFZ patch and also @evgeniychuikos boost mod as well

[2019-01-27 18:29:09] lolo780 : Could height be done without unlocking the app?

[2019-01-27 18:29:18] coldflake : altitude is up for a bounty in itself

[2019-01-27 18:29:27] coldflake : because we want to gain access to the hidden parameters

[2019-01-27 18:30:19] coldflake : if we can not do that @freaky123 "might" already have extracted some keys so that custom FC will be possible with the alititude limit just preset to 9000 meters

[2019-01-27 18:31:42] lolo780 : I wonder if anyone would contribute to an Occusync distance limit bounty

[2019-01-27 18:44:57] buuddy : Is there any good list of mods / patches for the mavic pro? I've been looking for a list, so far I've found: <https://github.com/Bin4ry/deejayeye-modder/blob/master/Patch-Descriptions.txt>

[2019-01-27 18:45:07] buuddy : and <https://dji.retroroms.info/howto/dji_configs?s[]=boost#auto_apply_the_config_android_with_app>

[2019-01-27 18:45:55] buuddy : but neither of these mention SilencoRC (which is great). Any good overview list?

[2019-01-27 20:34:08] chipmangini : Anybody here?

[2019-01-28 02:41:13] lolo780 : Hi

[2019-01-28 04:14:14] mrbracht : :wave:

[2019-01-28 10:20:14] coldflake : We have discussed including SilencoRC into NLD

[2019-01-28 10:21:03] coldflake : But it would require an add on key for a smaller amount that will go to the author

[2019-01-28 12:35:13] cantrepeat : I think that would be a great way to get it done! #support the extra dollars for it.

[2019-01-28 13:28:40] cs2000 : Me too, to be honest!

[2019-01-28 14:32:16] mrbracht : Yeah, definitely!

[2019-01-28 14:45:36] lolo780 : Silencing the M2 RC would be nice.

[2019-01-28 17:17:51] ben_lin : I see that the NLD Chinese site is still partially incomplete

[2019-01-28 17:18:17] ben_lin : Do you guys need help on further translation or is that just a technical issue?

[2019-01-28 19:51:04] cs2000 : @coldflake ^^

[2019-01-28 20:33:20] coldflake : @ben_lin yes all we can get

[2019-01-28 20:33:34] coldflake : Don't you have a login for the translation website?

[2019-01-28 21:04:08] ben_lin : I do

[2019-01-28 21:04:29] ben_lin : I thought the other guy finished everything

[2019-01-28 21:04:57] ben_lin : So I was surprised to see that the site remains partially incomplete

[2019-02-01 09:15:42] bin4ry : @webmaster where are you from exactly ?

[2019-02-01 09:19:24] webmaster : West Germany

[2019-02-01 09:29:40] coldflake : @ben_lin that is because we add new stuff all the time :wink:

[2019-02-01 09:57:53] webmaster : Schick schick, tendiere eher zu nem Landei:yum: Richtung M'Gladbach

[2019-02-01 09:59:59] webmaster : Deshalb hab ich hier teilweise 8km geradeaus Platz zum fliegen auf Range :)

[2019-02-01 10:00:45] bin4ry : na dann :wink: bin auch erst seit 1 1/2 jahren hier, vorher NRW :wink:

[2019-02-01 11:18:21] webmaster : Weshalb der Umzug? Gibt doch bestimmt viele NFZ's in Berlin ^^

[2019-02-01 11:21:42] bin4ry : beruflich

[2019-02-01 11:22:00] bin4ry : ich kenne keine nfzs :wink:

[2019-02-01 11:22:38] webmaster : gute Antwort ^^

[2019-02-01 18:23:22] webmaster : Welche Drohnen fliegst du konkret, Dji only oder auch andere?

[2019-02-01 18:42:14] joker_x3 : Is the 4.1.14 Go4 NLD version automatically patching NFZ? The new feature was announced a few days ago without a new NLD version. Also within the program under App Patching section the NFZ Patch checkbox isn’t available for 4.1.14

[2019-02-01 18:49:41] cs2000 : @quad808 ^^

[2019-02-01 18:51:14] bin4ry : fliege eigentlich garnicht wirklich. hab dji und was selbstgebautes (3d druck). meine drohnen haben mehr zeit auf dem tisch verbracht als in der luft :wink:

[2019-02-01 19:00:47] buuddy : How do I change my/see my droneid? <https://nolimitdronez.com/nld-vs-dji-aeroscope>

[2019-02-01 19:13:48] webmaster : Ahh okay, ich hab meine P4P, und die RF Kabel im Kontroller gewechselt. Bin extrem gerne Range-fliegen. 3D-Druck hört sich interessant an, welches Filament?

[2019-02-01 19:14:54] webmaster : Mein Rekord bisher (und natürlich heil zurück :wink: )

[2019-02-01 19:28:44] bin4ry : nette range. ich druck immer ABS :wink:

[2019-02-01 19:56:32] quad808 : Your welcome.

[2019-02-02 09:11:12] joker_x3 : Thank you! @quad808

[2019-02-04 17:58:50] webmaster : Russian militia news :stuck_out_tongue: <https://nolimitdronez.com/de/boards/topic/203/%D0%BD%D0%BE%D0%B2%D0%BE%D1%81%D1%82%D0%B8-%D0%BE%D0%BF%D0%BE%D0%BB%D1%87%D0%B5%D0%BD%D0%B8%D1%8F-%D0%BD%D0%BE%D0%B2%D0%BE%D1%80%D0%BE%D1%81%D1%81%D0%B8%D0%B8>

[2019-02-05 02:37:03] judah_lucifer : hi all, can you please advice what is the best fw for MP1? I am current use NLD apk with 1.3.7 but the apk always crash after a few munites

[2019-02-05 02:37:20] judah_lucifer : minutes*

[2019-02-05 02:46:27] quad808 : If your NLD GO is crashing, I would do a complete, clean uninstall of NLD GO, then patch a new 4.1.22 for NLD GO 4.1.22 and reinstall it. Remember to install in airplane mode and use "a" and "b" for user/pass

[2019-02-05 02:46:57] quad808 : 4.1.22 is solid.

[2019-02-05 04:15:06] judah_lucifer : thanks

[2019-02-06 11:34:36] marijus75 : Hi. Can you advise what NLD version is the best for CrystalSky with Spark OTG. And what Spark firmware version is optimal?

[2019-02-06 11:50:34] cs2000 : With the Spark, youd be best of using .14 version of DJI Go4, has better OTG support. Firmware, V01.00.0300 give you the mest flexibility as all mods are "unlocked" but "Best" is a subjective term, best for what?

[2019-02-06 12:25:34] marijus75 : For video, photography. I need best possible range (FCC mode), possibility to change WiFi channels. I don't need Altitude Removal, but I want to reduce Spark's yaw rotation speed, gimbal speed. What are the improvements since .0300 firmware for Spark?

[2019-02-06 13:24:21] cs2000 : of the top of my head, i dont know, get !DDD and all the changelogs are in there

[2019-02-06 15:23:49] marijus75 : <https://nolimitdronez.com/nld-mod-client-1310-and-nld-go-4114-released-2>

[2019-02-06 15:24:21] marijus75 : "This version of NLD GO 4.1.14 also works on Crystal Sky devices!"

[2019-02-06 15:24:53] marijus75 : Tried to install from microSD card without success.

[2019-02-06 17:09:50] quad808 : @marijus75 Are you trying to install on a CS? You need to root it first

[2019-02-06 18:23:10] marijus75 : Yes, I already rooted.

[2019-02-06 18:27:50] marijus75 : i got message "App not installed" when tried to install NLD GO 4.1.14 from microSD card. Before had installed NLD GO 4.1.22CS, but it doesn't work well with Spark OTG.

[2019-02-06 18:55:57] quad808 : as long as the app was patched correctly, if you can install NLD GO 4.1.22, you shouldn't have a problem with installing this. Make sure your CS is clean and no GO versions are on there, and no left over DJI folders, then try again.

[2019-02-06 19:20:46] marijus75 : Of course there are DJI folders because official DJI GO 4.3.4 is here also.

[2019-02-06 19:53:15] marijus75 : I also noticed some problems in 4.1.22. Used WiFi connection between CS and RC. RC connected to Spark with 5.8GHz well. But when I tried to change to 2.4GHz, the connection between CS and RC was lost, until I restarted NLD GO 4.1.22 app, RC and Spark.

[2019-02-06 19:55:27] marijus75 : If I do the same with my iPhone (4.3.10) instead of CS there are no problems at all changing frequency and channels.

[2019-02-06 20:26:30] quad808 : 4.1.22 doesn't work well with the Spark, OTG is messed up because of !DJI

[2019-02-06 20:28:07] quad808 : Not sure of your specific example, if that is just a problem with an earlier version of GO, since you are comparing 4.3.10 to 4.1.22. That must have been fixed in the later version.

[2019-02-07 16:29:43] marijus75 : Could it be that CS cannot connect to RC by 5.8GHz? This would explain the lost connection between CS and RC when I changed frequency to 2.4GHz between RC and Spark. It seems iPhone can connect to RC by 5.8GHz, but CS not. And as I understand the connections on AC-RC and RC/CS(or iPhone) must be of different frequency ranges,yes?

[2019-02-07 17:47:50] marijus75 : Finally solved wifi problem, changed country code to US in CS /data/property/persist.country.code. Now can set channels in both frequencies.

[2019-02-07 18:09:08] marijus75 : ...when rebooted CS find the old unchanged code 81B8 which I changed to 8348 and saved file with ES File Explorer Pro...

[2019-02-11 00:25:53] mrbracht : Which firmware version are we going to need to be on to root the Mavic 2? Just curious is all. Thank you!

[2019-02-11 00:49:58] chipmangini : @mrbracht I have no idea, but as always, don't update ANYTHING until you know. From my understanding, root has been achieved, but the devs that came up with it are waiting on more contributions towards the exploit before making it available. DJI offers a lot, so we have to compete with them! Go on over here and drop some cash! <https://nolimitdronez.com/bounty>

[2019-02-12 18:25:07] buuddy : I'm a happy NLD customer that doesn't want to root my phone or take the steps to get a patched go4 working on iOS, so I went to android and all worked well enough. Then I realized I had litchi on iOS and switched back to that, it works great. No nagging about updates or NFZ issues, it works **too** nicely. Other than having to buy the app if I didn't already have it, what's the catch with litchi? Less privacy?

[2019-02-12 22:53:30] chipmangini : I just got a P4P Pro and this one is on V01.05.0600. I'm looking to downstep the firmware to get rid of NFZ primarily, and altitude. I know that I could do the RC mod, but not really good with Linux, and can't seem to get things working in a way that I trust not to brick my bird. From the BirdMap it shows that If I want all the goodies, I need to be on V01.02.0304. My question is: Do I need to/Should I do this in steps, or just do it all at once? lQQking for peeps that have done this on this current firmware....

[2019-02-12 23:34:55] quad808 : I would downgrade in steps, and power cycle after each firmware flash, and flash each firmware twice. (after power cycle) This ensures error checking in the downgrading. The P4's are notorius for not flashing the firmware to the camera, so NLD will often detect in compatibility mode. This tells you that not all the modules are on the correct version. The way the firmware flashing works (DJI code) is that if the current firmware of the current module is a higher version it may just skip it and not downgrade it. Remember the key think...if you can turn on your RC and connect to the bird, it isn't flashing firmware.

[2019-02-12 23:36:31] quad808 : Remember also about NFZ on the P4's...the early firmware version doesn't have a NFZ db, but GO does. If you are using iOS GO, you will need to go to V4.1.3. digdat0 iOS go to 4.1.3: <https://www.youtube.com/watch?v=ziP2SBTzDh0>

[2019-02-12 23:51:26] chipmangini : @quad808 Thank you for the suggestions my friend! :+1:

[2019-02-12 23:53:58] chipmangini : I'll do it this weekend

[2019-02-15 20:34:51] marijus75 : Hi. I use NLDGO 4.1.14 with Spark OTG. If I change from 5.8GHz to 2.4GHz (AC/RC), application does not show WiFi info anymore, and there is no possibility to switch back to 5.8GHz and even to change 2.4GHz channel. Should it be like that, or I do something wrong?

[2019-02-15 20:43:54] quad808 : it may be the early go version of 4.1.14, not sure

[2019-02-16 02:25:03] cat.db : no news？

[2019-02-16 13:26:34] marijus75 : Who can answer?

[2019-02-16 21:19:02] marijus75 : Spark fw .1000, dji go 4.3.12, xiaomi mi max 3, otg. Works like a charm on both 2.4 and 5.8. You can change channels in 2.4 or 5.8, and you see wifi info and all telemetry data. With patched nldgo 4.1.14 there are problems when switched to 2.4 with otg! Nolimitdronez declare that their 4.1.14 version works well with otg. It is not true.

[2019-02-17 00:14:47] quad808 : Lets call this what it is. DJI made 4.1.14, not NLD. We just patch it, and that has NOTHING to do with the problem you are having

[2019-02-17 07:36:33] marijus75 : What is the reason to use patched 4.1.14 over the recent 4.3.12 ?

[2019-02-18 00:14:41] quad808 : Use what you want, but if you want to send all your data to DJI, use stock GO. If you want more freedom from DJI's prying eyes, use NLD GO. Up to you.

[2019-02-19 23:21:28] lolo780 : Any latest news on the M2?

[2019-02-20 03:10:37] mrbracht : Says Feb 2019.. I guess time will tell.

[2019-02-20 09:20:18] cs2000 : We (as in @coldflake) should be on track, but whatever happens, trust me, he is working **incredibly** hard to get this ready. Its just as always he is fighting on many fronts, trying to get the bounty stuff improved as thats a key to further NLD growth in terms of new drones, trying to squash the bugs in the current version and laying the framework for V2.0. It will happen, and it should be in February, but behind the scenes, things are very complex, NLD is ran like a proper business and things do unfortunately take time :slightly_smiling_face:

[2019-02-20 18:08:54] wouter : @cs2000 are there any plans to have NLD working on the SmartController?

[2019-02-21 09:48:31] cs2000 : Not at this exact moment in time due to current workloads, but never say never. Ofcourse we would need to get hold of a testing device too

[2019-02-21 15:33:59] wouter : how long would you need it for?

[2019-02-22 08:33:55] cs2000 : Not too sure, and there is always the (unlikely) risk of a brick. This community would need to come up with a root method first too.

[2019-02-22 16:10:07] wouter : makes sense

[2019-02-22 16:33:49] bin4ry : send me one and i’ll do it :joy:

[2019-02-22 16:41:30] quad808 : If anyone could unlock that, @bin4ry could!

[2019-02-22 18:04:01] wouter : hmmm. sending controller to a stranger in Germany.... i'd need some guarantees it'll come back to me!

[2019-02-22 19:44:02] cantrepeat : bricked

[2019-02-22 20:03:54] wouter : lol

[2019-02-22 21:25:15] bin4ry : please don’t send me a controller, i was just joking!

[2019-02-22 21:51:09] wouter : no dammit, i'm sending it to you! nothing you can do to stop me....

[2019-02-22 21:51:20] wouter : oh wait, i don't have a clue where you live

[2019-02-22 21:52:20] wouter : this is interesting though: <https://www.google.com/search?q=andreas+makris+dji>

[2019-02-22 21:53:42] quad808 : Just put it in the post and address it to bin4ry and see where it gets to.

[2019-02-22 21:54:38] wouter : yep, and then one day it'll just appear at my doorstep, rooted and everything

[2019-02-22 21:58:18] wouter : seriously though, i'd be happy to help facilitate root from the comfort of my own home, i posted system dumps and ota installation files a while back

[2019-02-22 21:58:44] wouter : if anyone wants to hold my hand to help figure out root for the community i'd be happy to do it

[2019-02-23 02:15:27] cantrepeat : @bin4ry In my best Dexter Holland, The Offspring voice, you can doo eet!! <https://www.youtube.com/watch?v=Qp6Qn8IwPf8>

[2019-03-01 09:41:49] trollspeed : Any updates?

[2019-03-01 09:42:11] trollspeed : I mean it is stated that their should be update on february

[2019-03-01 09:47:34] cantrepeat : I think coldflake's new handle is NOetas :smile:

[2019-03-02 14:17:16] coldflake : As I wrote in ~general, we decided to disappoint everyone by postponing it to March

[2019-03-02 14:17:37] coldflake : That is not because we don't have it ready or anything of that sort

[2019-03-02 14:18:22] coldflake : Instead we took a hardcore decision to finally switch over to using only duml to communicate with dji devices

[2019-03-02 14:19:34] coldflake : First of all we will be able to get rid of assistant which is kind of needed as it is starting to cause more problems than it solves

[2019-03-02 14:20:03] coldflake : Going forward, we will be able to implement new features in a few hours instead of a few days

[2019-03-02 14:20:45] coldflake : That could be fixed FCC / boost or a special camera mode or whatever

[2019-03-02 14:21:45] coldflake : Regarding the M2 release it will be much cleaner and no nonsense to be expected once in a while from assistant going crazy

[2019-03-02 14:22:40] coldflake : Finally it also enables us to release NLD on other platforms and not just only windows.

[2019-03-02 14:23:22] coldflake : NLD2 will be a completely different app and it will run on windows and Android to begin with.

[2019-03-02 14:24:58] coldflake : Those who have already chipped in for a key to their bird will of course get NLD2 for free via the auto updater

[2019-03-02 14:27:06] cantrepeat : No worries on the delay! /tiphat to everyone working on it!

[2019-03-02 23:09:09] dangerm0us : Is there plans for an iOS version?

[2019-03-02 23:12:11] lolo780 : I'd rather see development resources concentrated on new features.

[2019-03-02 23:17:34] cantrepeat : @dangerm0us there was/is talk about one of the OGs working on an iOS nld app but its not on the whiteboard as far as I know.

[2019-03-02 23:25:14] quad808 : coldflake [7:14 PM] NLD version 2 will come out for windows Android and iOS during the coming months

[2019-03-02 23:35:45] lolo780 : The only downside of android is the flight log bug

[2019-03-02 23:36:02] lolo780 : iOS will save logs over 32768m

[2019-03-02 23:36:19] lolo780 : Android won't. Should be an easy fix.

[2019-03-03 00:46:38] validat0r : 3276.8m .. and i have a feeling there will be a fix soon

[2019-03-03 02:04:40] lolo780 : Distance bug for saving the whole log. On android .22 if you fly 35km there's no flight log saved

[2019-03-03 02:58:01] ben_lin : Idk

[2019-03-03 02:58:11] ben_lin : Was excited to see the Feb release

[2019-03-03 02:58:37] ben_lin : But shit goes wrong in life… Hope they can release it before May

[2019-03-03 04:41:49] lolo780 : Hope it's released before all my mavic 1s die

[2019-03-03 05:38:24] validat0r : Oh, forgot that one.

[2019-03-06 19:32:12] cantrepeat : @coldflake <https://nolimitdronez.com/nld-vs-dji-aeroscope> Is this how the current NLD APK works or does it just not send out an ID at all or just block all communications between the drone any means to track it?

[2019-03-06 20:57:27] chipmangini : <https://www.thesun.co.uk/tech/8564046/dji-drone-modding-hacked-software-airport/>

[2019-03-06 20:58:01] chipmangini : :100:

[2019-03-06 21:38:00] coldflake : All the fuzz :)

[2019-03-06 22:18:27] chipmangini : Better===> <https://dronedj.com/2019/03/06/benefits-using-drones-at-airports/?fbclid=IwAR1WprYlp6woosQumhLirBB2sX_6W3sR9OJOAOMsJzWo7YjWiOsD7moa1qI>

[2019-03-18 19:26:10] ben_lin : Any news on M2?

[2019-03-18 19:29:52] lolo780 : Mine are still flying :sunglasses: But I'm sure the NLD folks are hard at work on the new software. New product = new sales.

[2019-03-20 06:57:29] ls7454 : all good things are worth waiting for and I have a feeling this is going to be REAL GOOD! Hey Lolo780, you flying a swarm ? :wink:

[2019-04-01 15:03:06] trollspeed : First of april and still no news ?

[2019-04-01 17:23:28] cs2000 : @trollspeed hopefully we have some news for you very shortly

[2019-04-01 17:25:27] trollspeed : Hope so, cause it is the second delay :) and no updates for MA at all

[2019-04-01 17:54:56] mrbracht : Just take your time guys, it will be well worth it once released I'm sure.

[2019-04-01 18:24:30] cantrepeat : Downloaded update this morning. Been flying it all day. Super sweet!!

[2019-04-01 18:32:43] cs2000 : @trollspeed GO check the blog :slightly_smiling_face: <https://nolimitdronez.com/19-the-holy-grail-of-releases>

[2019-04-01 18:50:23] mrbracht : Absolutely amazing! I'm so excited for this. Thank you!

[2019-04-01 20:03:58] wouter : curious - regarding the hacked firmware - would that enable us to force fcc mode regardless of the go app being used? i'm mostly asking as i want to force fcc on my smartcontroller and it seems patching the go4 app on the smartcontroller will need root which is perhaps something that has little interest

[2019-04-02 17:33:36] hotelzululima : so does @quad808 and others know if the M2Enterprise models(ir dual & zoom) are covered by this release??

[2019-04-02 17:34:23] lolo780 : That's a good question. Does anyone own those for testing?

[2019-04-02 17:34:59] hotelzululima : and does anyone have a local stateside(prefereably west coast vendor for the M2Enterprise) since they are NOT selling it from their website at this time?

[2019-04-02 17:41:30] lolo780 : Any dji dealer can sell those. They're locally available here. PNW.

[2019-04-02 17:51:24] bin4ry : iirc m2 e is the same as m2 from wmXXX number

[2019-04-02 17:51:44] bin4ry : but i might be wrong, that’s from the top of my head

[2019-04-02 18:36:56] the_lord : I do have M2E waiting for testing :wink:

[2019-04-02 18:39:39] bin4ry : of course :grin:

[2019-04-02 18:40:00] bin4ry : send me some firmware pls :wink:

[2019-04-02 18:40:15] bin4ry : preferably the last 3

[2019-04-02 18:40:26] bin4ry : it are they the same as for the pro and zoom?

[2019-04-02 18:40:35] bin4ry : since that would settle the question instantly

[2019-04-02 18:44:55] the_lord : @bin4ry how can I get these FW files? It was very long time since I played with these things

[2019-04-02 18:56:00] bin4ry : well, it would be enough if you can tell the wm number

[2019-04-02 19:59:24] hotelzululima : ok

[2019-04-02 20:23:12] hotelzululima : I am under the impression that the software differs a bit.. so will be waiting with bated breath your testing on m2e and unencrypted firmware dumps..

[2019-04-02 20:26:01] hotelzululima : @the_lord IR flight videos from the M2E would really be appreciated as trying to determine usefulness of the IR for tracking lost animals(dobermans) & humans & subsequent purchase of the m2e dual in a few hours when nld 1.9 drops :slightly_smiling_face:

[2019-04-02 20:32:36] cantrepeat : seems thermal sights/camera would work better for tracking heat sources.

[2019-04-02 20:38:57] hotelzululima : looking at youtube videos.. the msx view is killer

[2019-04-02 20:39:29] hotelzululima : can even set the temp ranges you interested in.. <https://www.youtube.com/watch?v=kk3PNcVFBjQ>

[2019-04-03 01:20:21] hotelzululima : seems to do ok with the hybrid view inspite of being such low res at least in these videos

[2019-04-03 01:35:31] hotelzululima : pings and needles till 1.9 drops :slightly_smiling_face:

[2019-04-03 13:12:39] cs2000 : lol, dont you worry, its coming :wink:

[2019-04-03 14:51:47] hotelzululima : tick tick tick tick tick..

[2019-04-03 15:12:26] bin4ry : tock tock tock tock tock..

[2019-04-03 15:19:30] lolo780 : I bought a NLD key for a P4.. first time using it. Can't do height and nfz on latest firmware.

[2019-04-03 16:22:26] trollspeed : :ghost:

[2019-04-03 17:26:41] cs2000 : Lolo, i assume you're trolling right?

[2019-04-03 17:35:51] lolo780 : No, I looked at it briefly and it said wasn't supported

[2019-04-03 17:36:28] cs2000 : ahh right, yeah its not on the latest firmware, sorry, thought you were trolling!

[2019-04-03 17:37:15] lolo780 : No, I thought I'd buy a key to send a few bucks their way

[2019-04-03 17:37:22] cs2000 : :slightly_smiling_face:

[2019-04-03 17:37:48] lolo780 : If I flash mixed modules can I still use the NLD client as normal?

[2019-04-03 17:38:14] lolo780 :

[2019-04-03 17:39:45] cs2000 : Sadly not, NLD (currently) look at all the modules at the same time and matches the complete data set to a version number, so they all have to be the same version for it to be detected as being on a certain firmware

[2019-04-03 17:39:57] cs2000 : 1.9 will be changing that because its a hot mess!

[2019-04-03 17:41:21] lolo780 : Ah. Is it possible to change the linked device to one of my M2Ps? Will just save it for the m2 release.

[2019-04-03 17:41:29] lolo780 : And do the p4 manually

[2019-04-03 17:44:42] cs2000 : Yeah, im sure we can, just send a message to support, i dont personally have access to the license system, i have to log the ticket to someone else. Log it as "License Issue"

[2019-04-03 17:44:50] cs2000 : and it will go to them automatically

[2019-04-03 17:45:31] lolo780 : Thx

[2019-04-03 17:47:00] lolo780 : The initial release won't have a height removal will it?

[2019-04-03 17:47:30] lolo780 : For the m2.

[2019-04-03 17:47:59] cs2000 : Cant say either way at this point im afraid mate, more details will be released when it gets released

[2019-04-03 17:48:57] lolo780 : Ok. A local film crew is going to K2 this month with a pair of I2s and M2Ps.

[2019-04-03 17:49:38] lolo780 : Filming extreme skiing. They're going to run the i2s from base camp up to 8000m.

[2019-04-03 17:51:13] cs2000 : That will be awesome to shoot :slightly_smiling_face:

[2019-04-03 17:54:02] lolo780 : Yeah, I'm getting them set up with battery preheating and working with their pilot on flying high altitude.

[2019-04-03 17:56:09] lolo780 : Probably set an i2 altitude record. Looks like k2 peak is 8600m

[2019-04-03 23:06:53] dnacho : Hey @cs2000 is there anything being worked on the mavic air? About the camera error 3?

[2019-04-03 23:07:26] cs2000 : What is Camera Error 3?

[2019-04-03 23:08:35] cs2000 : Im sure there is some work happening on/for the air, its always been our goal to be able to do more on it, but cant confirm either way. But nothing specifically related to any camera errors.

[2019-04-04 04:39:46] hotelzululima : never seen it so quiet on here.. wtf??

[2019-04-04 05:10:25] lolo780 : Quiet?

[2019-04-04 05:20:34] trollspeed : 4th of april :/ on the first of april nld site stated "There is going to be a HUGE update to NLD within the next 48 hrs, hopefully sooner." So does anyone know info on updates?

[2019-04-04 05:20:43] hotelzululima : yep expected news long by now.. everyone holding their breath.. moi? I am waiting for 1.9 to be released so I can study it and see how they managed root persistence.. ghidra awaits!

[2019-04-04 07:50:40] rickysuper : Yes, waiting for the 1.9 release

[2019-04-04 09:22:20] cs2000 : It is generally quiet around Slack at the moment. Im sure 1.9 will reignite the fire. No, i dont know when it will be out, but rest assured its being worked on literally almost 24 hrs a day as it has been for a while now.

[2019-04-04 14:20:04] trollspeed : Yep, but the spoon is good for dinner.

[2019-04-05 09:41:11] webmaster : Has it ever been so quiet here before? :smile:

[2019-04-05 09:41:56] cs2000 : Does seem quiet in slack overall recently

[2019-04-05 09:44:34] webmaster : Anyway, I'm sure the wait will pay off, as NLD is awesome already. NLD pure DUML edition will be way cooler :sunglasses:

[2019-04-05 09:46:13] cs2000 : It really is way cooler

[2019-04-05 09:47:37] webmaster : New comment highscore on the NLD blog: 39 :smile:

[2019-04-05 10:27:43] d95gas : I like Comment 40 :slightly_smiling_face:

[2019-04-05 10:29:08] cs2000 : me too :wink:

[2019-04-05 10:30:49] d95gas : Think some of them need a "Chill Pill"..... so a deadline was missed..... its not exactly life or death, and lets face it, NLD could just bolt the doors and go silent...... then where would we be!!

[2019-04-05 10:38:34] cs2000 : I know. I feel bad the deadline was missed, as does Quad and Coldflake, of course we do. But (and no, its not an excuse) Coldflake and others have been pulling some insane shifts to get it finished as soon as we can. Maybe we shouldnt have promised a deadline, but we dont want to release some half baked :poop:, especially because we know the anticipation for the M2, we need to get it right. Its taken a bit longer than we initially expected.

[2019-04-05 10:43:57] d95gas : Totally agree. Some mega hours have gone into these, and I think what a lot fail to understand, this is NOT a job or work to the guys, they at the same time have their day jobs to do, which is what really puts food on the table. People just want to think back to the early days of MP1 when OG's had not been formed..... We had nothing, and it could still be like that if it wasn't for all this hard work. Just need to let them get on with it, without all the sarcastic comments, and let them produce a good finished product.

[2019-04-05 11:09:20] cs2000 : Correct, trust me, some people really have gotten quite snarky about it. Kinda sad really. But we all want it out the door ASAP, when its ready it will be out :slightly_smiling_face:

[2019-04-05 11:10:11] cantrepeat : ETSson!!!

[2019-04-05 11:10:16] cs2000 : :joy:

[2019-04-05 11:11:29] cantrepeat : ETAson*

[2019-04-05 15:50:45] dnacho : Dji paired the camera sensor to the main board. And the pairing of both can only be done with a software dji gives to repair centers. Also if you change the motors on the gimbal there is no way to recalibrate them, but I don't know if there is a tool like the one for the spark? That let's you calibrate the gimbal?

[2019-04-05 15:51:14] dnacho : @cs2000 Dji paired the camera sensor to the main board. And the pairing of both can only be done with a software dji gives to repair centers. Also if you change the motors on the gimbal there is no way to recalibrate them, but I don't know if there is a tool like the one for the spark? That let's you calibrate the gimbal?

[2019-04-05 15:51:33] dnacho : Also does anybody know if the p4p v2 can be unlocked with nld?

[2019-04-05 15:51:54] cs2000 : Ahh, well no, nothing in NLD will allow you to re-calibrate anything. No on the p4P V2 either

[2019-04-05 16:06:07] dnacho : Yeah and do you happen to know if any body is working on something like that?

[2019-04-05 16:06:22] dnacho : The advanced and p4pv1 can be unlocked right?

[2019-04-05 16:06:22] cs2000 : nobody is as far as i know

[2019-04-05 16:06:29] cs2000 : Yes, they can

[2019-04-05 16:07:15] dnacho : Because I need to unlock one of each

[2019-04-05 16:21:58] cs2000 : check ~general for a tease :wink:

[2019-04-05 16:58:07] quad808 : I was going to comment, but #40 says it all.

[2019-04-05 17:35:59] dnacho : Will support for the p4pv2 be added on this release?

[2019-04-05 17:44:40] yihuasteven : hi, i use the nld software to under grade my mavic pro from 1.04.300 to 1.03.700 and get a message that " SD card error", if change the app language into chinese, the same message in Chinese which could be translated " the flight controller data abnormal", and the bird can not take off... what to do with it?

[2019-04-05 18:05:22] lolo780 : Does your AC have the internal SD card fitted?

[2019-04-05 18:05:53] lolo780 : Builds after approx Oct 2017 don't have an sd

[2019-04-05 18:06:45] lolo780 : But the slot is there, simply open the top shell, pick away the sealer and pop a card in.

[2019-04-05 18:07:58] yihuasteven : ok, i see, the problem is that the builds after oct 2017 could not be flashed to an earlier firmware because the lack of the internal sd card

[2019-04-05 18:08:24] yihuasteven : am i right

[2019-04-05 18:09:57] yihuasteven : by the way , is there any tutorials to open the top shell and pop the card in? thanks!

[2019-04-05 18:11:13] quad808 : <https://www.youtube.com/watch?v=H_RhqHHli7Q&t=3s>

[2019-04-05 18:12:05] yihuasteven : thanks!

[2019-04-05 18:28:08] rickysuper : Don't know why my login account had been locked.... I had sent the help request to the support team.

[2019-04-05 19:46:41] quad808 : Bad @rickysuper, bad boy

[2019-04-05 19:46:59] quad808 : account just needs a reset, thats all

[2019-04-05 22:38:27] edisonbattery : <https://imgflip.com/i/2xvq5j>

[2019-04-05 22:39:06] cs2000 : <https://dji-rev.slack.com/files/U60GY27UL/FHA2N235G/image.png>

[2019-04-05 22:39:14] cs2000 : Its comin'...

[2019-04-05 22:58:06] wouter : :raised_hands:

[2019-04-06 00:29:59] edisonbattery : DOH! May the schwartz be with us all.

[2019-04-06 02:46:29] arielei : :clap::clap::clap::clap::tada::tada::tada::tada:

[2019-04-06 11:27:57] rickysuper : Where can I down the 1.9 ?

[2019-04-06 12:16:49] d95gas : when it gets released I guess :slightly_smiling_face:

[2019-04-06 14:45:18] cantrepeat : ETAson!!

[2019-04-06 16:03:34] d95gas : I bet as a kid he was the one screaming "are we there yet" and the bloody car was still on the drive :slightly_smiling_face:

[2019-04-08 02:30:45] arielei : Refreshing the page every day countless times waiting for version 1.9, is the 48 hour released on April 1 a joke?

[2019-04-08 02:32:18] cantrepeat : ETAson, Soon™

[2019-04-08 02:38:29] mrbracht : Suddenly, you and me both. Ha. Either way I'm not too worried about when it comes out cause I'm guessing when it does come out, we are in for an amazing treat!

[2019-04-08 02:40:24] quad808 : Yah, no joke. No Aprils fools nonsense. Just happened to be on the same day. It will be worth whatever wait there is, even if you don't have a M2. All around it will be a much better program.

[2019-04-08 05:25:36] bin4ry : we found some last second bug, needed fixing, happens

[2019-04-08 13:11:52] webmaster : Hope it includes a Darkmode, the most important feature after all :smile: JK

[2019-04-08 23:26:14] mrbracht : How the bugs going?

[2019-04-10 04:28:42] trollspeed : Two months and 10 days from first target date :) Do you think bugs are feeling bad? :)))

[2019-04-13 08:19:09] yihuasteven : hi, i am on 1.03.700 firmware, and set remove attitude limit, in the nld app, i can see it the range is (20m~9000m), but when i enter the number higher than 500 meters, it says set successfully, but the number in the enter box is still 500, does that mean i still failed to remove the attitude limit? thx

[2019-04-13 08:21:39] yihuasteven : since i am living in a city, i will not try to fly over 120 meters where i live, however, i will probably try flying higher than 500 meters some time in the countryside, just want to make sure it really will work

[2019-04-13 16:12:25] cs2000 : @yihuasteven you don’t set the limit. If you’ve set the tick box in Flight Controller to disable altitude limits then they’re disabled totally. Try setting your height limit in the app to 30m and watch the drone fly straight through. Basically, just ignore the height limit setting entirely.

[2019-04-14 13:27:07] yihuasteven : Thx I'll try

[2019-04-14 18:55:59] cantrepeat : @coldflake @quad808 heads up guys, online dating dubai is the hot topic on the NLD forums atm :smile:

[2019-04-14 18:56:40] coldflake : Oh fuck, the last time it were lusty Russian women

[2019-04-14 18:56:54] cantrepeat : yeah, this one too All no deposit casino bonuses in 2019. Only on our site!

[2019-04-14 18:57:06] cantrepeat : I can use some no deposit casino bonuses!!!

[2019-04-14 18:57:36] coldflake : @quad808 @cs2000 job for you guys, maybe you guys can advice them a little bit on online dating?

[2019-04-14 18:58:06] coldflake : Yeah awesome, didn't we gave out casino bonuses but coool

[2019-04-14 18:58:50] coldflake : As soon as I am done with 1.9, the forums will get an overhaul on the backend side

[2019-04-14 19:02:44] cantrepeat : sweet, add font color too pls, nice to put NOTE: don't brick your shit in RED!!

[2019-04-15 06:11:39] webmaster : In the FAQ section "Do you acccept WeChat Pay or Alipay?" the answer should be corrected to point out that Alipay works, too :slightly_smiling_face:

[2019-04-15 08:05:01] cs2000 : @catalinaskirace thanks for the forum spam reports, clearing them up now. Damn those Russian brides!

[2019-04-15 08:18:38] cantrepeat : Save that one, I'm on the hunt!!!

[2019-04-15 14:46:19] ben_lin : Hows that bug squashing going?

[2019-04-15 14:46:41] ben_lin : Getting close to May and I need that sweet NFZ disarm for the M2...

[2019-04-15 14:47:10] bin4ry : @ben_lin :slightly_smiling_face:

[2019-04-15 14:49:33] bin4ry : enough ? :smile:

[2019-04-15 14:50:37] ben_lin : haha that means its going good?

[2019-04-18 04:28:13] flyingkite : Will there be future support for Mavic 2 .0200 firmware?

[2019-04-18 04:45:14] bin4ry : can’t be answered in general

[2019-04-18 04:45:46] bin4ry : why do you want that?

[2019-04-18 04:49:31] bin4ry : to say it a bit more vague even, not yet released features work on all firmwares (from initial testing), they will be release soon. BUT others doesn’t work higher than 0100. anyway i didn’t notice any problems or missing features on 0100.

[2019-04-18 07:27:40] wouter : fantastic news!!!

[2019-04-18 07:28:04] wouter : i'm super stoked that FCC boost will be possible from the smart controller

[2019-04-18 07:28:52] wouter : is it true that anyone who donated $100 or more gets a free copy of NLD? cuz I know someone that qualifies!

[2019-04-18 07:44:38] flymymavic : Buy a key and win the chance to get a refund, kinda sucks for us that have a key already, it’s our money that let you get this far.

[2019-04-18 07:59:20] cantrepeat : Get brand new software and find something to complain about. good fucking god

[2019-04-18 09:17:50] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.9.0.0

[2019-04-18 10:12:21] dangerm0us : Woah! It dropped! What a Herculean effort by all involved. I wanted to stop by and say a massive ‘Thank you’ for everything you’ve done for the community. I can’t wait to purchase my copy. You guys just made flying fun again!

[2019-04-18 10:41:08] chipmangini : !apk

[2019-04-18 11:49:58] cantrepeat : I love the fact that 1.9 displays the FC version number!! No more guessing what I have flashed!

[2019-04-18 13:06:41] xchwaw : The NLD 1.9 removes the altitude limit?

[2019-04-18 13:07:30] cantrepeat : on some drones yes, not on all.

[2019-04-18 13:08:15] xchwaw : works on the Mavic 2?

[2019-04-18 14:00:10] arielei : How downgrade?my fw is 01.00.0200

[2019-04-18 15:01:40] xchwaw : I have readed it from the website,NLD 1.9 can't remove the altitude limit of M2 now.

[2019-04-18 15:02:11] xchwaw : thanks@catalinaskirace

[2019-04-18 15:03:47] lolo780 : No height mod for M2 yet. Hopefully they'll be working on it after all the Russian ladies leave.

[2019-04-18 15:07:11] cantrepeat : Yeah it's on the birdmap of what NLD can and can't do. It's pretty clear.

[2019-04-18 15:22:04] flymymavic : So is this new version just for the MP2, coz it don’t see my MP @catalinaskirace yeah it’s not brand new, it’s built with money received from us that have paid and I’ll bitch if I want to.

[2019-04-18 15:24:15] cantrepeat : works perfect on my MPP, Go on, bitch some more.

[2019-04-18 15:24:59] cantrepeat : I also paid but I'm not going to be a cunt about it.

[2019-04-18 15:33:51] bin4ry : @flymymavic the whole process is optimized for all drones. new feature release is for m2, what are you missing on m1?

[2019-04-18 15:42:41] flymymavic : @bin4ry how do you mean, what am I missing, 1.9 does not see my drone connected, DJI asst sees it can’t use 1.8 as it auto updates, NLD won’t launch if I turn off my internet connection, unless it gets sorted I can’t use NLD mate

[2019-04-18 15:43:45] lolo780 : I had the same issue, switched computers and 1.9 worked fine.

[2019-04-18 15:43:51] flymymavic : @catalinaskirace and no doubt ya never complain about anything and suffer because of it. Enuff said

[2019-04-18 15:43:55] lolo780 : Driver issue or something.

[2019-04-18 15:44:27] flymymavic : @lowellfoo780 will give that a try, other PC is win 10 and I hate it

[2019-04-18 15:44:40] lolo780 : Windows 10 is better

[2019-04-18 15:44:51] flymymavic : @lowellfoo780 no mate 1.8 worked fine last night

[2019-04-18 15:45:01] lolo780 : Win7 has issues with dumldore 3.20 for me.

[2019-04-18 15:45:16] rainman : Hi all. I'm back from the dead. :open_mouth: fwiw- NLD v1.9.0.0 hangs on my Win10-64 at "Getting FC info..". I did put in a ticket. 1.8.0.(3?) worked on same machine but I did notice that sometimes I needed to start assistant 1st.

[2019-04-18 15:45:29] lolo780 : Yeah supporting win 7 for new software is a waste of precious time.

[2019-04-18 15:45:48] lolo780 : Since most have win10 by now

[2019-04-18 15:46:33] bin4ry : hm that’s a bug then, 32 bit? 64 works fine all time here

[2019-04-18 15:46:39] bin4ry : tested with 4 drones i have

[2019-04-18 15:47:02] lolo780 : Dunno. I went and bought a laptop with win10. Problem solved.

[2019-04-18 15:47:23] rainman : If that was for me @bin4ry I'm using W10 64 bit. Dell 3010 with 16mb mem, usb 2.0

[2019-04-18 15:49:24] flymymavic : It’s Win7 64bit

[2019-04-18 15:51:57] flymymavic : Bollox it’s Win7 that’s the issue, just loaded it on win10 and it works, only down side is that the w10 is the works laptop and I can’t use it on that, gonna have to update my Win7 from the looks of it.

[2019-04-18 15:51:59] lolo780 : Try a win10 mahine

[2019-04-18 15:52:36] lolo780 : I loaded the 1.9 app on to the drone

[2019-04-18 15:52:48] lolo780 : Ran it like that on a user account. Worked great.

[2019-04-18 15:52:57] rainman : @flymymavic Win10 doesn't suck much worse than 7, imo. If that's any consolation.

[2019-04-18 15:54:00] bin4ry : @flymymavic at least it works now for you.

[2019-04-18 15:54:12] bin4ry : @coldflake ^—

[2019-04-18 15:55:35] coldflake : We will push an update tonight that fixes the win 7 issue

[2019-04-18 15:55:51] flymymavic : @rainman yeah i guess, it just had an issue with the DJI asst but they have fixed that now

[2019-04-18 15:56:12] flymymavic : @coldflake that would be mighty great mate

[2019-04-18 15:56:18] coldflake : Nld will shoot assistant down if it sees it :)

[2019-04-18 15:56:48] flymymavic : Yeah i only use it to check connections

[2019-04-18 15:57:24] lolo780 : @coldflake what's your assessment of getting a height mod on the M2?

[2019-04-18 15:58:13] coldflake : As of now we have no deployable solution for altitude removal on M2

[2019-04-18 15:58:18] rainman : crap.. I just started to smell my Spark! It was sitting there waiting for NLD to get the FC info, lol. Quite warm!

[2019-04-18 15:58:33] lolo780 : Always use a fan

[2019-04-18 15:58:48] d95gas : To all the NLD team, many thanks for a superb product, lot of hard work has gone into that, and the final product is just awesome. Not used it yet, need to blow the dust of the MP, but this weekend is going to be test weekend. Just wanted to express my appreciation for all the hard work you put into this. Thanks. :clap:

[2019-04-18 15:58:55] lolo780 : M1s are notorious for overheating when flashing

[2019-04-18 16:00:09] rainman : I see that, lol. I just disconnected the usb (NLD wasn't going anywhere any how) and the Sparkie fan is cooling it down now. :scream:

[2019-04-18 16:11:49] cantrepeat : FWIW NLD 1.9 ran fine on my win10 64. Saw both FW and FC versions. Patched a new apk and on exit it pop upped a dialog box with winning lotto numbers in it!!!

[2019-04-18 16:16:09] andrwho25 : any mavic air changes in 1.9?

[2019-04-18 16:17:39] lolo780 : Don't think anything new for the Air. It's kind of sad no Air guys are donating to the bounties.

[2019-04-18 16:20:03] hotelzululima : so excellent question in ~general .. does 1.9 leave the M2 rooted(ie persistent root)…??

[2019-04-18 16:20:59] hotelzululima : and if @the_lord is listening?? did you try on your M2Enterprise yet??

[2019-04-18 16:22:45] flymymavic : @coldflake can ya turn off the auto updater as well and have it prompt maybe ?

[2019-04-18 16:36:33] bin4ry : it makes use of root ofc, but for the user it won’t give you and adb root shell.

[2019-04-18 17:19:43] bin4ry : wasn’t aware of that, thx for the info!

[2019-04-18 17:25:10] coldflake : @flymymavic no, the auto updater is there for a purpose and without going into details it is a counter measure against dji. For whatever that means is up to your own interpretation ;)

[2019-04-18 17:29:07] cantrepeat : !dji

[2019-04-18 17:34:53] kilrah : just seen of it last night, they haven't even put the new relnotes on the site yet, it's only on their forum i think

[2019-04-18 17:35:19] kilrah : i'll have to get an NLD key to try that stuff when I get back home :sweat_smile:

[2019-04-18 18:00:41] flymymavic : @coldflake winks eye and nods

[2019-04-18 18:01:18] lolo780 : @coldflake any purchases from Shenzen? Lol

[2019-04-18 18:01:36] lolo780 : I hear Frank Wang is a NLD fan

[2019-04-18 18:02:28] arielei : I downgraded 01.0.0100,but nld client can’t connect m2?what’s wrong?I already pay for it and get an activation [key.my](http://key.my) system is win10

[2019-04-18 18:03:30] coldflake : Those who experience connect problems where nld can not see their drone all seem to have one thing in common

[2019-04-18 18:03:35] lolo780 : Load the app on to th M2 internal memory and try a different computer.

[2019-04-18 18:03:37] coldflake : They all use windows 7 or 8

[2019-04-18 18:04:02] coldflake : We will push an update that fixes that issue

[2019-04-18 18:05:09] coldflake : @arielei make sure you have only 1 device connected and no ther apps are hogging the com port

[2019-04-18 18:05:36] coldflake : Is it 32 bit windows that you are using?

[2019-04-18 18:05:51] coldflake : Because that is what seems to be the real issue

[2019-04-18 18:33:58] arielei : X64 win10,dji assistant 2 can connect m2.I will try change a different computer.

[2019-04-18 18:39:26] rainman : @coldflake Doesn't explain mine. Wouldn't be my first at bat as the outlier though. Well, I suppose I take that back. Mine communicates but hangs on getting the FC info.

[2019-04-18 23:07:36] rainman : Hey! Did you guys fix something already? It's connecting & reading the FC info now. Thanx. I brewed 2 new Go packages but still got No Fly/NFZ so I went back to reapply NFZ removal for my 01.00.0900 and it now fails to download the NFZ patch. :persevere: Mebbe I'm supposed to buy an EVO. Or move.

[2019-04-19 10:45:12] coldflake : That sound very much like connection issues with the server

[2019-04-19 10:52:54] cantrepeat : In the immortal words of Sam Kinison, we have deserts, but we don't live in them!

[2019-04-19 11:26:16] coldflake : @rainman it sounds like it were rebuilding the FC from a failed flash or something

[2019-04-19 11:26:32] coldflake : I have tried the r several times

[2019-04-19 11:27:06] coldflake : When the flash completes it sometimes does it upon next reboot

[2019-04-19 11:27:38] coldflake : And while it does that it might drop the com port and at least the module it is silently reflashing

[2019-04-19 12:27:29] rainman : Thanx @coldflake. I'm going to try NFZ patches again this morning, if that fails I will try all of this again on my linux box with the regular software. Is all of this futile if I'm trying to fly on the outer edge of the Wash DC special NFZ? If so I'll look for an archived .0300 firmware that I hope I saved a long while back.

[2019-04-19 12:28:06] validat0r : old firmware is here !ddd

[2019-04-19 13:04:49] coldflake : Spark NFZ patching has been fixed

[2019-04-19 13:05:03] coldflake : no need to update the app, it was a server side issue

[2019-04-19 13:05:43] coldflake : Connect issues has also been fixed but that requires to redownload the app as we have not bumped the version number yet

[2019-04-19 13:05:57] coldflake : we will do that tonight when 1.9.0.1 comes out

[2019-04-19 13:07:11] lolo780 : What was the connection issue?

[2019-04-19 13:18:35] coldflake : in win 32 bit you have 9 com ports in 64bit you have 255

[2019-04-19 13:18:41] coldflake : they are referenced differently

[2019-04-19 13:19:29] yihuasteven : Hi, is there any method to downgrade from 1.00.40 to ealier firmwares for the time being?

[2019-04-19 13:22:54] coldflake : have you tried again?

[2019-04-19 15:09:45] yihuasteven : And one more question, is the DJI SMART CONTROLLER( for m2) supported?

[2019-04-19 16:05:41] wouter : very interested in that as well ^^^

[2019-04-19 16:24:56] ben_lin : afaik it doesnt matter

[2019-04-19 16:25:04] ben_lin : everything is done on birdside

[2019-04-19 16:25:42] ben_lin : the nfz on the bird is killed and replaced with an empty one, so as long as u dont hit the"agree" button when dji go prompts u to update nfz, u good

[2019-04-19 16:26:23] ben_lin : and the m2 fcc mod will be done birdside too as per @bin4ry, so whatever rc/smar device u use is irrelevant

[2019-04-19 16:26:37] ben_lin : @wouter @yihuasteven

[2019-04-19 16:27:04] bin4ry : even that should work, try it :slightly_smiling_face:

[2019-04-19 16:27:36] ben_lin : for real? i gotta try this when i get home then

[2019-04-19 16:27:57] wouter : i was getting that impression as well, but there's talk about using the modded Go app, and i'm pretty sure that won't work on the smart controller

[2019-04-19 16:28:06] wouter : thinking i'll give it a whirl this weekend

[2019-04-19 16:29:03] ben_lin : tbh the smart rc is more like dumb rc

[2019-04-19 16:29:24] ben_lin : cant use apps such as dronedeploy

[2019-04-19 16:40:01] lolo780 : How about pornhub?

[2019-04-19 16:41:22] wouter : @ben_lin somewhat agree, real bummed about 3rd party app support

[2019-04-19 16:41:42] wouter : but i do love having a standalone device for my drone and the form factor rocks

[2019-04-19 16:42:04] ben_lin : what i used to do is mount my 7.85cs on the mavic rc

[2019-04-19 16:42:20] wouter : i did that too for a while, but the CS is soooo underpowered

[2019-04-19 16:42:25] ben_lin : ik

[2019-04-19 16:42:28] wouter : my fps was abysmal

[2019-04-19 16:42:29] ben_lin : the thing lags

[2019-04-19 16:42:39] ben_lin : and its gpu cant keep up

[2019-04-19 16:42:49] ben_lin : it legit made me think my drone is broken

[2019-04-19 16:43:14] ben_lin : because if i turn my drone fast enough, the cs gpu would lag and the give screen tearing

[2019-04-19 16:43:15] wouter : yeah, i bought the SC with the intent of returning it if fps wasn't better

[2019-04-19 16:43:25] wouter : it is better

[2019-04-19 16:43:34] ben_lin : they had a snapdragon 821 or 835 in there?

[2019-04-19 16:43:37] ben_lin : cant quite remember

[2019-04-19 16:43:49] wouter : if you screen record on the SC it's still a bit laggy, but useable

[2019-04-19 16:43:59] wouter : don't think it's either

[2019-04-19 16:44:02] wouter : some rockwood chip

[2019-04-19 16:44:05] ben_lin : what

[2019-04-19 16:44:15] ben_lin : damn

[2019-04-19 16:44:58] lolo780 : Now if dji could just give p4p stick feel to the mavic 2 controllers

[2019-04-19 16:45:22] wouter : it's def better on the CS than the stock controller, but still too short

[2019-04-19 16:45:27] wouter : more travel though

[2019-04-19 16:45:28] ben_lin : found it

[2019-04-19 16:45:31] ben_lin : rk3288

[2019-04-19 16:45:36] wouter : ya, that sounds right

[2019-04-19 16:45:51] ben_lin : ffs why not snapdragon

[2019-04-19 16:46:03] ben_lin : seriously how much is that thing again?

[2019-04-19 16:46:24] wouter : too much

[2019-04-19 16:46:37] wouter : $650

[2019-04-19 16:46:47] ben_lin : big oof

[2019-04-19 16:47:07] ben_lin : for $650 u can get a op6t with spare

[2019-04-19 16:47:10] wouter : i do love it though

[2019-04-19 16:47:19] ben_lin : i only complain because i am broke

[2019-04-19 16:47:25] ben_lin : lol

[2019-04-19 16:49:27] wouter : yeah, i had an insurance claim on some hail damage that overpaid, so i said fuck it

[2019-04-19 18:20:45] rainman : @coldflake Many thanx for fixing the NFZ patch. It appears to have just patched my .1000 fw on Spark! ..BUT.. Is this supposed to allow op in the DC special zone? I'm at the northern edge of it and I'm getting NFZ warning & no motors. Using a freshly patched Go 4.1.22. nosec as well. :cry:

[2019-04-19 18:22:05] lolo780 : Try 300 firmware.

[2019-04-19 18:22:25] lolo780 : 300 FC allows direct parameter mod

[2019-04-19 18:23:17] lolo780 : My sparks are still broken so can't test anything.

[2019-04-19 18:23:18] rainman : Last time I tried (last night) .300 doesn't allow NFZ removal in NLD. :cry::cry:

[2019-04-19 18:23:27] lolo780 : Oh

[2019-04-19 18:23:42] rainman : Well, I hadn't tried params ..

[2019-04-19 18:23:51] bin4ry : what is special dc auth zone ?

[2019-04-19 18:23:55] rainman : .. just params

[2019-04-19 18:24:30] rainman : It's the freaking 30 mile NFZ around the U.S. Capitol/W.H. Pain in my ass

[2019-04-19 18:25:01] lolo780 : Parameter mod means AC ignores everything I thought.

[2019-04-19 18:25:02] rainman : All I need is 40-50 ft height ath the outer 1-2 mile edge

[2019-04-19 18:25:26] bin4ry : which color is it?

[2019-04-19 18:25:36] bin4ry : green yellow red

[2019-04-19 18:25:41] lolo780 : Try 300 and parameter mod. let us know.

[2019-04-19 18:25:46] rainman : Haven't looked lately but it should be red

[2019-04-19 18:25:52] bin4ry : ok

[2019-04-19 18:26:19] bin4ry : what does your ac nfz version say in the app?

[2019-04-19 18:26:42] rainman : fwiw, I'd be willing to help hack a reasonable mod to that zone but I'd need a tiny bit of hand-holding

[2019-04-19 18:27:29] lolo780 : Try lifting off with no device connected.

[2019-04-19 18:27:38] rainman : The top left status is red. forgot what it said, but after it gets gps details say it's a NFZ

[2019-04-19 18:27:44] lolo780 : That will eliminate the app as a possible source.

[2019-04-19 18:28:10] bin4ry : nono in settings screen about device

[2019-04-19 18:28:17] bin4ry : there are version numbers

[2019-04-19 18:28:23] rainman : Lemme see if it will get gps inside here at my pc..

[2019-04-19 18:28:24] bin4ry : for nfz database

[2019-04-19 18:28:39] bin4ry : don’t need gps to see the version

[2019-04-19 18:28:41] lolo780 :

[2019-04-19 18:28:52] lolo780 : That screen

[2019-04-19 18:28:58] bin4ry : ok

[2019-04-19 18:28:59] bin4ry : thx

[2019-04-19 18:29:01] rainman : Oh.. I'll check. Gotta fire everything up again

[2019-04-19 18:29:07] bin4ry : wait a second

[2019-04-19 18:29:14] bin4ry : please do it this way;

[2019-04-19 18:29:41] bin4ry : 1. start device wait some time to get it running properly 2. start rc

[2019-04-19 18:29:48] bin4ry : then try to start

[2019-04-19 18:30:13] bin4ry : also make sure you also try with stick combo

[2019-04-19 18:30:19] bin4ry : down and inwards

[2019-04-19 18:30:28] rainman : It connected with rc while you were typing.. I haven't fired Go up yet though

[2019-04-19 18:31:00] rainman : Just use the controller?

[2019-04-19 18:31:31] bin4ry : yes try please

[2019-04-19 18:31:48] rainman : ok.. going outside..brb

[2019-04-19 18:32:08] bin4ry : thx

[2019-04-19 18:32:18] cantrepeat : yup, trying to capture 1024v on a CS is pretty rough

[2019-04-19 18:55:18] rainman : @bin4ry Can't say that I remember how to launch without Go app, but holding sticks down & in does nothing, but after release and about a second or 2 the read bird leds flash red twice. I then connected Go and have some screen caps ..

[2019-04-19 18:57:08] rainman :

[2019-04-19 18:57:26] bin4ry : ok

[2019-04-19 18:57:26] rainman :

[2019-04-19 18:57:39] bin4ry : that’s enough already

[2019-04-19 18:57:43] bin4ry : patch isn’t applied

[2019-04-19 18:57:44] rainman :

[2019-04-19 18:57:48] rainman : sorry.

[2019-04-19 18:58:17] rainman : the 00's are not what should be there?

[2019-04-19 18:58:19] bin4ry : @coldflake

[2019-04-19 18:58:25] bin4ry : nope they shouldn’t

[2019-04-19 18:58:36] bin4ry : i guess a part of the patch is missing on yours

[2019-04-19 18:59:15] coldflake : when did you apply the patch @rainman?

[2019-04-19 18:59:21] coldflake : how many hours ago?

[2019-04-19 18:59:45] rainman : .. story of my DJI life. @coldflake about 30 mins? 1 HR?

[2019-04-19 18:59:51] coldflake : ok

[2019-04-19 18:59:53] coldflake : hmm

[2019-04-19 18:59:58] coldflake : let me check something

[2019-04-19 19:00:11] rainman : before the NFZ patch wouldn't d/l

[2019-04-19 19:00:41] cs2000 : Seems to be reported a few times on support too (patch wont download)

[2019-04-19 19:01:03] rainman : lol, most are prolly mine.

[2019-04-19 19:01:14] coldflake : @rainam

[2019-04-19 19:01:28] coldflake : let me try something here and then you can perhaps try again?

[2019-04-19 19:01:28] rainman : The no d/l seems to be fixed (on the bright side!)

[2019-04-19 19:01:37] rainman : sure

[2019-04-19 19:01:53] rainman : got all day. supposed to get tornados, lol

[2019-04-19 19:05:08] hotelzululima : wonder how the sport mode of the M2 will handle with(in) a tornado :slightly_smiling_face:, lol!!

[2019-04-19 19:06:19] hotelzululima : flyaway very very fast.. wheee looky here at this airmap track!!

[2019-04-19 19:09:09] rainman : Worse than that.. I'm tryin to launch a Sparkie

[2019-04-19 19:10:09] validat0r : Nld has problems removing nfz on spark?

[2019-04-19 19:10:36] rainman : Already lost my Tello (but I knew that would happen). And it was just breezy. I'm hoping the coming high winds will blow it out of the pine tree it's in

[2019-04-19 19:10:56] rainman : Yeah, problems on mine anyway

[2019-04-19 19:29:16] validat0r : No doubt the guys will help you

[2019-04-19 19:29:58] rainman : Yeah.. great peeps here.

[2019-04-19 19:38:32] bin4ry : we will get there, seems rainman has the jackpot usually(sorry mate)

[2019-04-19 19:44:56] validat0r : you mean D.C. zone is the jackpot? I thought beijing was it

[2019-04-19 19:47:26] cantrepeat : I thought it was Narnia, what gives man?

[2019-04-19 19:50:51] cs2000 : The DC zone is weird, even with NFZ's fully disabled using parameters like on MP1, its still there, like its hard baked in somewhere else.

[2019-04-19 19:51:19] validat0r : interesting

[2019-04-19 19:52:57] lolo780 : Area 51

[2019-04-19 19:53:07] lolo780 : DJI triangle

[2019-04-19 20:28:59] rainman : EVO it is, huh? fwiw, the blue square with the checkmark is where my 75' tree canopy covered house is. :dizzy_face:

[2019-04-19 20:30:05] rainman : Anyone in the neighborhood, feel free to stop by and make me an offer on my gently used Spark, lol.

[2019-04-19 20:30:11] validat0r : sorry, cant fly .. have to protect POTUS

[2019-04-19 21:42:07] coldflake : @rainman It should work now

[2019-04-19 21:43:01] rainman : Woo Hoo! Will try it now. (Plus, it's stopped raining for the moment)

[2019-04-19 21:43:09] coldflake : Awesome!

[2019-04-19 21:43:18] coldflake : just reapply the patch

[2019-04-19 21:44:04] rainman : That was what I was just typing. so no need to re-do the firmware, just apply the patch .. got it.

[2019-04-19 21:44:22] coldflake : yes, I double checked it for .900

[2019-04-19 21:44:29] coldflake : and I am now doing the same for .100

[2019-04-19 21:44:32] coldflake : .1000

[2019-04-19 21:44:40] coldflake : but the bug should be the same regrdless

[2019-04-19 21:45:07] rainman : oh.. When .900 failed, I burned .1000. I'll reburn .900 & try it first.

[2019-04-19 21:46:40] rainman : .. ok, well then I'll try .1000 and if it fails reburn .900. Either way I'll let you know here.

[2019-04-19 21:46:53] coldflake : cool

[2019-04-19 21:47:03] coldflake : I dont think it makes any difference which one you try

[2019-04-19 21:47:11] coldflake : as it uses the same script for both

[2019-04-19 21:47:23] coldflake : what I am checking out now is if they changed the paths in 1000

[2019-04-19 21:47:42] rainman : cool? me, nah YOU'RE cool, lol. The cooliest.

[2019-04-19 21:54:08] coldflake : just checked it, it will work on both, no change in paths

[2019-04-19 21:54:24] coldflake : so mavic nfz patching should now work :slightly_smiling_face:

[2019-04-19 22:13:54] rainman : No joy. Still no activation due to in NFZ. Also, the db's are all still 0's. And just for good measure, reburning .0900 f/w is stalled at 100% Preparing firmware flash.

[2019-04-19 22:15:46] rainman : I'm now hoping I saved my old .0300 image, but I've changed computers since then. Going to retry .0900 first though.

[2019-04-19 22:17:49] lolo780 :

[2019-04-19 22:17:57] lolo780 : Set these two parameters to 1

[2019-04-19 22:18:52] lolo780 : In a NFZ you can start the motors up right away, but when the AC realizes it's in a NFZ auto landing should kick in.

[2019-04-19 22:20:02] rainman : will try that. Good news is .0900 burn is going now on the second try.

[2019-04-19 22:23:45] rainman : Those 2 params should be zero as shown? It does think I'm in NFZ as I get a RTH warning about it. As I recall once before it tried to return home and because it was trying to avoid the NFZ it tried to fly away, lol.

[2019-04-19 22:24:11] lolo780 : Stock is 0. I set them both to 1.

[2019-04-19 22:24:25] rainman : That was a long time ago, when getting it working with 0.300 though

[2019-04-19 22:24:54] rainman : got you. I thought 1 was "yes"/"true".

[2019-04-19 22:25:30] rainman : just a sanity check & we're on the same page I think

[2019-04-19 22:25:58] lolo780 : I almost lost a P4A once when the home point was set too far away. Instead of trying to fly there, the stupid thing stayed in ATTI mode and I had to chase it down to get signal back. Brought it down safely.

[2019-04-19 22:26:09] lolo780 : DJI programming not the best

[2019-04-19 22:26:12] rainman : geezus, I see you typed it. sorry

[2019-04-19 22:27:06] coldflake : @rainman it is lot needed to set those two parameters

[2019-04-19 22:27:25] rainman : thanx

[2019-04-19 22:27:56] coldflake : The patch should do it, maybe something where fooked but I will check again

[2019-04-19 22:28:05] lolo780 : Not needed, but will allow you to start motors and fly. Useful to check.

[2019-04-19 22:28:16] lolo780 : My to do pile

[2019-04-19 22:30:56] rainman : shite. prolly shouldn't have been typing while flashing.. it's stuck at 17% :anguished:

[2019-04-19 22:32:22] coldflake : Could you try the nfz patch again?

[2019-04-19 22:34:22] rainman : umm.. sure if it's not bricking itself as I type. I'm envisioning a video to DJI of me beating it to death with a sledge, dousing it and setting it on fire atm. Be back with you shortly..

[2019-04-19 22:35:44] lolo780 : <https://i.imgur.com/Nu8v6j3.jpg>

[2019-04-19 22:36:09] lolo780 : It didn't work after. No care refresh.

[2019-04-19 22:37:00] rainman : My vid will have action shots with audio.

[2019-04-19 22:38:46] lolo780 : <https://youtu.be/NXnK59dRghs>

[2019-04-19 22:39:03] lolo780 : I have a 20 ton press. Might try a bricked board sometime.

[2019-04-19 22:40:39] rainman : What's the collective advice on dealing with this screen that hasn't changed in 4+ minutes now?

[2019-04-19 22:41:15] coldflake : something is fucked with your bird dude

[2019-04-19 22:41:29] coldflake : is the light flashing

[2019-04-19 22:41:30] coldflake : ?

[2019-04-19 22:41:39] rainman : If it wasn't before, it will be I surmise

[2019-04-19 22:42:03] rainman : yes, rear greens are flashing, fronts on steady red

[2019-04-19 22:42:21] coldflake : if front is steady red it stopped flashing

[2019-04-19 22:42:32] coldflake : turn it off and back on and nld will pick up

[2019-04-19 22:42:35] rainman : oh.. progress.. rears went red for a sec just now..

[2019-04-19 22:42:41] coldflake : ok

[2019-04-19 22:42:45] coldflake : tthen take it easy

[2019-04-19 22:43:10] coldflake : but it should not take that long

[2019-04-19 22:43:10] rainman : still at 17%.. going to pour a gin & tonic..

[2019-04-19 22:43:38] lolo780 : Make sure it doesn't overheat

[2019-04-19 22:44:18] lolo780 : If you don't have a fan, put it on some frozen bag from the freezer

[2019-04-19 22:48:10] rainman : yeah, thanx. Just got a fan on it. Interrupted my drink mixing, but it's still on 17%. Getting the beverage, going to pee, brb .. (this is fun, huh?)

[2019-04-19 22:49:14] coldflake : Turn it off and then back on

[2019-04-19 22:49:26] coldflake : its not even started the real fun at 17%

[2019-04-19 22:52:34] rainman : leave NLD as-is?

[2019-04-19 22:53:16] rainman : restart it too, I guess.. cycling the bird seemed to have no effect on NLD

[2019-04-19 22:53:40] coldflake : yes

[2019-04-19 22:53:45] coldflake : leave nld

[2019-04-19 22:55:04] coldflake : it should pick it up

[2019-04-19 22:55:13] coldflake : if not restartr NLD and flash the same firmware again

[2019-04-19 22:56:23] rainman : NLD wasn't responding (it seemed) so I killed it and restarted it I guess the good news is that it read the bird and it's still on .1000. Bad news is that I was out of Tonic Water, but Lemon-Lime is okay too. Suggest I retry the NFZ patch now,. or finish my beverage first, lol.

[2019-04-19 22:56:51] coldflake : I suggest that you complete the flash to 100%

[2019-04-19 22:58:42] coldflake :

[2019-04-19 22:58:55] coldflake : I have flashed back and forth a zillion times

[2019-04-19 22:59:02] coldflake : but that ofc doesnt solve your problem

[2019-04-19 22:59:05] rainman : The flash that went south was me trying to go back to .0900 to try the NFZ patch. Should I just reburn a new .100, or the failed .0900. Wish you were here so I could offer YOU a beverage, btw

[2019-04-19 22:59:24] coldflake : always the one you were going to

[2019-04-19 23:00:05] rainman : ok. That means restarting .0900 from the menu.. that ok?

[2019-04-19 23:00:16] coldflake : yep

[2019-04-19 23:05:53] coldflake : so first get to a stable flash to 900

[2019-04-19 23:06:01] coldflake : when that is completed successfully

[2019-04-19 23:06:11] coldflake : try applying the nfz patch

[2019-04-19 23:06:22] coldflake : then it should work

[2019-04-19 23:07:49] rainman : will do. Thank you for being so patient & responsive. It's hanging again at 15% & I see it's checking the md5's.. maybe I've got a bogus usb cable? Anyway, I'll do or die. Thanx again

[2019-04-19 23:43:34] yihuasteven : Does it mean that a modded nld go app is not neccessary to use these m2 mods? All i need to do is to hack the bird and use official version dji go 4？

[2019-04-20 00:29:09] rainman : Fuck it. I'm done with DJI. Thanks guys for all the hard work you've put into this effort over the years that I've seen it grow. Happy that the Mavic guys are enjoying it but I'm just gonna cut my losses. Cheerz.

[2019-04-20 00:48:48] coldflake : what happend?

[2019-04-20 02:20:33] quad808 : Remember that the modules get checked on each flash. Takes a couple of minutes, and the flash will look like it is stalled. Just be patient and leave it.

[2019-04-20 02:33:55] yihuasteven : Does it mean that a modded nld go app is not neccessary to use these m2 mods (NFZ removal)? Just need to remove nfz in the nld client on the bird and use official version dji go 4?

[2019-04-20 02:35:01] lolo780 : Yes, it's all bird side

[2019-04-20 03:22:02] jcarlo : I use stock iOS. No problem

[2019-04-20 03:38:05] flyingkite : When applying the NFZ patch to the spark, what version # should be displayed for the precise fly safe database (aircraft)? Currently displaying 01.00.01.08 - Go app version 4.3.14

[2019-04-20 06:42:05] arielei : how to download dji go4 patcher?it’s unable to click

[2019-04-20 06:46:04] abdo054 : Bird must be connected for some reason

[2019-04-20 06:52:11] arielei : M2 already connected,i removed nfz,it’s ok,but the dji go patcher can’t download,the text is gray

[2019-04-20 06:53:35] abdo054 : Let me try

[2019-04-20 06:55:36] abdo054 : Working fine at my end

[2019-04-20 07:00:30] bin4ry : no go for m2

[2019-04-20 07:02:22] bin4ry : the go version that is patchable doesn’t work with m2, so the function is not available when using m2

[2019-04-20 07:04:18] abdo054 : Fair enough .. I'm trying with a mavic 1

[2019-04-20 17:37:36] ksyiu : @ksyiu has joined the channel

[2019-04-20 22:04:17] c.binetti : hey guys, are there any improvements for the mavic air? as per the homepage it don't look like

[2019-04-21 02:19:19] coldflake : Does anyone have connection issues after 1.9.0.1?

[2019-04-21 09:52:50] the_lord : unfortunately i missed the party, i'm still on vacation with no drones :disappointed:

[2019-04-21 10:16:15] cantrepeat : downloading now

[2019-04-21 10:23:43] cantrepeat : working on my end MPP win10 64

[2019-04-21 10:26:21] webmaster : P4P with FW 01.04.0602 and NLD 1.9.0.1 working like a charm :slightly_smiling_face:

[2019-04-21 10:26:41] webmaster : Win10 64

[2019-04-21 10:29:20] webmaster : downgraded because on 01.05.0600 I lost frames in my 4k video, sometimes the screen goes black for a split second

[2019-04-21 12:58:05] cantrepeat : Will 1.9 bypass activation and unlock M2?

[2019-04-21 12:58:27] cantrepeat : I guess registation and login is still app side.

[2019-04-21 12:58:38] cantrepeat : registration even

[2019-04-21 15:58:59] rainman : @coldflake - sorry. I realized that I owe you an explanation and info, but I was just SO done with DJI that I had to step back, off. The bird still hangs FOREVER at various points in the md5 checksum verification. Maybe it's my PC, maybe the bird. Once it made it all the way to 88% (and hung) but the battery was almost gone so I just stopped it. The worse hang up spots seem to be at 15% and 17 or 18%. Every time I waited and aborted, NLD is able to read the bird info and it is still on .1000 so I decided to run the NFZ patch and am going to take it someplace out of this NFZ to make sure it otherwise flys OK before I sell the POS. I really do respect and applaud what you and all the other OGs have done for DJI owners, but I think I'm bailing in favor of either a Parrot Anafi or an EVO depending on how much cash I can dig up. The last issue I had (still have but will fix) is that I built an NLD Go v22 but it won't get past the sign-in/sign up screen. Yes, ripped ALL of any existing DJI dirs off the phone b4 my installs. I can type aaa/bbb into the name/pw area of the app, but nothing ever shows up to actually go into flight mode. I'm at the PC now because I think I had a version that allowed me in but I still got NFZ warnings/no take off and was hoping that the NLD built Go app would help (hail Mary pass b4 selling it). While in the old app I screen capped the current Spark db state and I think it shows that the NFZ patch worked, dunno.

[2019-04-21 16:48:32] coldflake : Use aaa bbb for user and pass

[2019-04-21 16:48:56] coldflake : The the forum holds a guide

[2019-04-21 17:49:30] cantrepeat : ok so same as all other releases

[2019-04-21 17:55:37] rainman : Thanx again. I did the airplane mode dance and got the sign in, still won't fly here in DC special area. Going to travel away & check a clean area, and maybe test a "normal" NFZ so I can advise a purchaser, but I just didn't count on the amount of dancing required per $ for me to fly DJI and just take some Harry Homeowner-Traveler pics & vids, so thanks again everyone, and I wish everyone the best. :rocket:

[2019-04-21 19:14:42] coldflake : Don't hurry up too much selling it because we have a new nfz patch in the making that most likely will take the DC area also

[2019-04-21 20:32:15] lolo780 : Good to know if DC is a specialy coded nfz

[2019-04-21 21:35:31] quad808 : Yes, D.C. is hard to get flying in. In almost all cases you will need to go down to 01.00.0300 and turn OFF NFZ via the checkbox for the Spark, and either use NLD GO 4.1.14 for OTG, or use iOS GO 4.1.3 only.

[2019-04-22 09:04:27] d95gas : @coldflake @quad808 & Team NLD - Guys, great work on the latest NLD proggy, whole team @"'dun good" :slightly_smiling_face: Quick question about future developments ..... Is there any plans to put the " **FC Patcher"** option into NLD (my brain is fried these days, so always looking for the easy option). Thanks

[2019-04-22 09:47:31] coldflake : YEs FC patcher for the old birds is on the way

[2019-04-22 09:48:05] coldflake : for the newer bird M2 we will release Fixed FCC mode without the need of any app

[2019-04-22 10:38:05] flymymavic : @coldflake got a couple of guys contacting me about an error, Windows 7 PC’s , any advice mate

[2019-04-22 10:39:23] coldflake : Hmm, I need to look into it. Do you run nld as administrator?

[2019-04-22 10:39:48] coldflake : It should have access to write to the system folder if running as admin

[2019-04-22 10:40:14] coldflake : It needs to place a ms runtime dll there that adb is dependending on

[2019-04-22 10:40:36] flymymavic : Will check with the question askers mate, they are newbies at this

[2019-04-22 10:40:56] flymymavic : Most time Win7 pops up the UAC

[2019-04-22 10:42:50] flymymavic : Just gotta work, will pop back in later

[2019-04-22 10:54:12] kilrah : should really have an installer and its own folder in program files, putting stuff in system folder has been a no-no for a couple of decades :slightly_smiling_face:

[2019-04-22 11:01:01] d95gas : @coldflake thanks for the confirmation, I shall wait PATIENTLY :slightly_smiling_face: Not inclined to go to the MP2..... To be honest I haven't had any real use out of the MP or the Anafi this past year due to a mental workload :disappointed:

[2019-04-22 11:42:36] coldflake : There will be a lot of new stuff for the old birds. Better ways to do stuff and broader compatibility plus bee features.

[2019-04-22 11:51:17] d95gas : what sort of timescale ..... And I only ask that so I can decide whether to blow the cobwebs off now, or just use the Anafi and wait for the update ..... No pressure :slightly_smiling_face:

[2019-04-22 14:43:53] bin4ry : wasn't anyone here with problems of downgrading and RC connecting ?

[2019-04-22 14:44:04] bin4ry : if so please write me a PM

[2019-04-22 14:52:45] cantrepeat : @bin4ry I think that was @jakwnd over in spoonfeed, but seemed like he was on about rooting the controller. Could have been someone else.

[2019-04-22 16:03:17] flymymavic : ok so with Win7 64bit I’m having a no go on connecting to my MP1, thought 1.9.0.1 was addressing this?

[2019-04-22 16:05:03] flymymavic : I’m seeing NLDAPP.exe*32 in task manager,

[2019-04-22 16:05:37] flymymavic : Ahhh wait I have to run as admin, never needed that before

[2019-04-22 16:05:42] flymymavic : All sorted

[2019-04-22 16:07:13] 007 : I recommend you to upgrade the win 7 to win 10, I have a lot of connect issue and from the win 10 it's over with my p4p and spark.

[2019-04-22 16:08:34] flymymavic : I did until the lads fixed the Win7 issue, hate Win10 with a passion, all sorted now as I said

[2019-04-22 16:21:09] flymymavic : Before I put my foot in it, is NLD supposed to be able to flash the controller of the MP1, at this time on Win7 and win10 it doesn’t connect, I see a post from @bin4ry just a couple of posts up about it

[2019-04-22 16:30:26] bin4ry : different topic

[2019-04-22 16:31:42] bin4ry : few users had a non concerting rc after downgrade of the m2 drone, i wanted to find one and test a solution in PM

[2019-04-22 16:34:01] flymymavic : Ahh right, so does NLD flash the RC for the MP1

[2019-04-22 16:34:27] flymymavic : Or is it just for flashing the quad

[2019-04-22 17:01:22] bin4ry : not sure if RC flashing is flipped to enabled yet, need to ask @coldflake

[2019-04-22 17:11:53] flymymavic : Cheers mate @coldflake just checking, does NLD flash the MP1 RC, being asked in Dji Modding and I wanna get my facts right

[2019-04-22 17:13:09] coldflake : Yes it does but I have disabled it for the time being. I decided to skip it as people could just use the go app

[2019-04-22 17:13:29] coldflake : But... I will re-enable it in one of the next releases

[2019-04-22 17:13:59] coldflake : Tonight Fixed FCC mode comes out for M2 so it will not be in the next release at least

[2019-04-22 17:14:04] coldflake : But the one after

[2019-04-22 17:14:28] flymymavic : Top man cheers

[2019-04-22 18:04:23] tommiboost : This is what im getting always run as administrator

[2019-04-22 18:04:40] tommiboost :

[2019-04-22 18:04:47] quad808 : download the latest version and try again

[2019-04-22 18:04:59] tommiboost : It is the latest version

[2019-04-22 18:21:17] flymymavic : Just spoke to cold flake about this issue, one of my lads ran as admin and it cleared it, the other lad still has the same issue, cold flake is looking at it

[2019-04-22 18:26:32] coldflake : I have actually fixed it and it will come out in the M2 FCC release tonight

[2019-04-22 18:32:12] flymymavic : Dude you rock

[2019-04-22 21:30:16] coldflake : anyone who has connection problems that will try and test a solution out?

[2019-04-22 23:37:39] coldflake : @tommiboost that is fixed in the next release

[2019-04-23 01:43:12] rickysuper : I can't remember, how can I invite non slack member to this forum? My friends will buy NLD and may need support. Thanks

[2019-04-23 02:08:41] coldflake : I think they have to join the workspace and then they can join the channel

[2019-04-23 03:39:48] rickysuper : Thanks @coldflake

[2019-04-23 06:42:52] flymymavic : @coldflake Ken Mc on the NLD FB page just messaged me saying you need a win 7 64bit tester for something, can I help ?

[2019-04-23 08:53:07] the_lord : Mavic 2 Enterprise Dual

[2019-04-23 08:53:25] the_lord : NLD is unable to read device type and SN

[2019-04-23 08:53:59] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.9.0.1

[2019-04-23 09:46:15] elintnl : Hi Guys, what will be the max speed for the MP2 pro with nld

[2019-04-23 11:20:15] kohler91 : @coldflake How is the M2 FCC release going?

[2019-04-23 12:27:24] dronepilot : Nfz on Mavic 2 every time powered on the white led flashes and turn off. On the app the led option shows off you can turn to auto but when it power off and back on it automatically resets to off again. Is this correct?

[2019-04-23 12:46:58] cs2000 : @rgf8aerial Yep, the flashing white LED is an indication the NFZ patch has been loaded and is working

[2019-04-23 12:58:47] coldflake : @flymymavic I managed to nail that issue but thanks a lot for the offer mate

[2019-04-23 13:00:19] coldflake : They apparently do something different with the enterprise dual

[2019-04-23 13:01:06] coldflake : We need to investigate that

[2019-04-23 14:15:45] coldflake : It comes out today but we are currently side swiped by looking into a flashing isse some users are experiencing. It has nothing to do with nld at all but it sucks and the same thing happens if one is using assistant.

[2019-04-23 14:17:09] coldflake : Main problem is impatient users and bad upgrade reporting from the bird. That is a bad combo that spells bricked birds lol

[2019-04-23 14:53:14] kohler91 : Thank you so much for the update and great work!

[2019-04-23 14:59:55] flymymavic : @coldflake anytime you need help mate I’m usually available, are you in the NLD FB group?

[2019-04-23 15:34:43] dronepilot : @cs2000 thanks buddy, just tested the M2 with no nfz works perfectly. Just missing altitude bypass.

[2019-04-23 16:25:29] cantrepeat : @coldflake anytime you need help with hookers, cocaine, russian brides or the like I'm your man!!

[2019-04-23 16:25:52] coldflake : any time mate

[2019-04-23 16:41:52] bin4ry : !deadhooker

[2019-04-23 16:51:57] ben_lin : It’s OUR hooker

[2019-04-23 16:52:12] ben_lin : In mother Russia the state gives hookers

[2019-04-23 16:53:16] ben_lin : Back in the glorious Soviet days, we don’t even need to worry about dem NFZs

[2019-04-23 16:53:27] ben_lin : Because it was the people’s airspace

[2019-04-23 22:15:38] wouter : just realized i'm on firmware 1.00.0300 - does that mean i'm screwed and can't get nld?

[2019-04-23 22:15:45] wouter : ^m2pro

[2019-04-23 22:16:11] quad808 : No, just downgrade to 1.00.0100 USING NLD

[2019-04-23 22:16:43] wouter : oh nice, i thought you could only downgrade from 200

[2019-04-23 22:16:50] wouter : thanks!

[2019-04-23 22:17:13] wouter : will the fcc hack work on 200?

[2019-04-23 22:18:05] wouter : nm, found my answer here: <https://nolimitdronez.com/what-in-store-for-the-next-nld-mod-client-release>

[2019-04-23 22:18:09] wouter : ^ only works in 100

[2019-04-23 22:18:22] quad808 : wait. let me check into the downgrading

[2019-04-23 22:22:33] quad808 : use Assistant for now to downgrade to .0200, then NLD to .0100

[2019-04-23 22:24:30] lolo780 : I downgraded from 0300 with NLD

[2019-04-23 22:32:07] quad808 : I am behind the times...oopsie

[2019-04-23 22:33:19] wouter : thanks guys!

[2019-04-23 22:33:43] wouter : so not that this really matters, but that means no waypoint missions on nld

[2019-04-23 22:34:06] wouter : question regarding the FCC droneside hack - does this work with Litchi?

[2019-04-23 22:53:28] lolo780 : Use litchi or dji pilot

[2019-04-23 22:53:51] lolo780 : FCC not sure

[2019-04-24 01:28:28] bjoneseying : Silly question but if I used the NLD .100 and then upgrade to 400 for M2, would the NFZ/FCC hack be lost?

[2019-04-24 01:39:14] wlliamchen : yes,only work on .100

[2019-04-24 01:58:47] bjoneseying : hmm ok - bit of a predicament i'm in as I'd like to use the dual RC feature as well as FCC.. NFZ not that big a deal just yet

[2019-04-24 02:15:20] rickysuper : Dose NFZ remove works on all versions of official Go4 ? Thanks

[2019-04-24 02:18:04] rickysuper : online and offline both works ?

[2019-04-24 02:18:23] quad808 : The NLD removal patch only works on the drone, not GO. GO still has a NFZ database, so you will still get red maps

[2019-04-24 02:20:57] rickysuper : After patched the M2, GO still has a NFZ database, so you will still get red maps. Can I take off the M2 ?

[2019-04-24 02:21:26] rickysuper : What proccess I should do with the Go 4?

[2019-04-24 03:16:11] coldflake : @rickysuper Yes you can take off in a NFZ with the stock go app

[2019-04-24 03:16:21] coldflake : it will just spew some warnings and show the NFZ on the map

[2019-04-24 03:28:12] rickysuper : Thanks @coldflake

[2019-04-24 04:34:11] bin4ry : please try if they work on 0100, i saw that the option is still there

[2019-04-24 05:26:48] elintnl : Hi Guys, what will be the max speed for the MP2 pro with nld????

[2019-04-24 06:57:12] lolo780 : 21-22m/s

[2019-04-24 07:00:33] elintnl : thanks

[2019-04-24 07:27:16] nopcode : are there any downsides to using the 0100 FW as opposed to the latest on M2?

[2019-04-24 07:27:55] kilrah : see the firmware release notes and see if what was added/fixed is stuff you care about...

[2019-04-24 07:35:34] nopcode : controller battery lifetime improvements and precision landing seem kind of nice to have yeah

[2019-04-24 07:35:58] nopcode : seems like they're still ironing out bugs so it'd be worthwhile to be able to upgrade

[2019-04-24 07:36:56] ben_lin : FYI u lose waypoints too

[2019-04-24 07:37:18] ben_lin : The rc battery life improvement is done on the rc side

[2019-04-24 07:37:29] ben_lin : So u can keep that

[2019-04-24 07:37:42] ben_lin : Precision landing is, meh

[2019-04-24 07:40:24] nopcode : litchi has had "waypoints" for ages i dont understand what this feature is supposed to be

[2019-04-24 07:40:44] nopcode : i can keep that by only updating the RC?

[2019-04-24 07:42:15] validat0r : Waypoints saved on the ac and operated on autonomously

[2019-04-24 07:43:43] nopcode : that already worked with litchi on my phantom 3

[2019-04-24 07:45:29] nopcode : anyways, are there any roadblocks to porting the NLD patches to the latest FW versions?

[2019-04-24 07:45:35] nopcode : or is it just a matter of time?

[2019-04-24 07:47:41] nopcode : trying to find out where the journey is going before pulling the trigger on a M2P & NLD

[2019-04-24 07:48:23] nopcode : kinda scary that no recent version of go4 has been unpacked yet :neutral_face:

[2019-04-24 07:56:56] nopcode : why isn't there a bounty for that btw?

[2019-04-24 07:57:14] nopcode : i bet the warez scene should have the tools to unpack secneo enterprise

[2019-04-24 08:08:52] validat0r : differently to litchi you can disconnect rc-ac while flying an autonomous waypoint mission

[2019-04-24 08:09:38] validat0r : and: please, find that tool and unpack it .. and collect the bounty

[2019-04-24 08:27:23] ben_lin : Sceneo probably isn’t getting cracked anytime soon

[2019-04-24 08:28:10] ben_lin : And porting over the patches shouldn’t be too difficult for the NLD crew, probably just a matter of time.

[2019-04-24 08:30:30] cs2000 : @ben_lin ive heard whispers that the SECNEO DJI is using (the enterprise version) has been cracked. But its all very underground and is an extremely costly service you can purchase. **Just to be clear**, this is me speaking, not cs2000 in any NLD related capacity, just what ive seen/heard from my own research into it.

[2019-04-24 08:57:39] rickysuper : my friend did the NFZ patch of the M2 but cannot fly to the NFZ area using official 4.3.16 official app.

[2019-04-24 09:05:13] cs2000 : @rickysuper Does he get the white LED flash when the drone powers on?

[2019-04-24 09:07:42] rickysuper : Flash white light means flashing successful ? Thanks

[2019-04-24 09:08:32] cs2000 : Yeah, kinda. When you power it on, if the light comes on and goes off again, it means the NFZ patch was loaded and is working. Also make sure he is actually running 01.00.0100

[2019-04-24 09:20:57] rickysuper : Yes he is actually running .100 FW, let me ask him if he see white light flashing when boot up. Thanks

[2019-04-24 11:58:34] rickysuper : The fact was that my friends flies into height restricted area but still got the height limit. Did remove NFZ patch also remove height restrictions ? Thanks

[2019-04-24 12:25:19] cs2000 : Ahh OK. No, NFZ and altitude removal are two seperate things. Alt removal isnt supported yet

[2019-04-24 12:40:48] rickysuper : Thanks @cs2000

[2019-04-24 16:25:38] wouter : will do

[2019-04-24 17:32:53] windshearfl : Anyone else see this? Appears on start of program, NLD won't connect with or without DJI Assistant running.

[2019-04-24 17:34:02] quad808 : yep. Win 7? you need Visual C++ Redistributable for Visual Studio 2015

[2019-04-24 17:34:17] windshearfl : Correct. Thanks, grabbing now.

[2019-04-24 17:40:59] windshearfl : FYI - I had the 2017 packages installed and it kicked an error until I uninstalled them: 0x80070666

[2019-04-24 17:41:12] quad808 : that should work for you

[2019-04-24 17:46:29] windshearfl : Got 2015 installed. Same error. Other ideas?

[2019-04-24 17:47:12] quad808 : did you run NLD as admin?

[2019-04-24 17:47:33] windshearfl : Yes

[2019-04-24 17:47:35] quad808 : restart after installing C++?

[2019-04-24 17:47:39] windshearfl : Yes

[2019-04-24 17:48:12] quad808 : ok, one more thing to try...right click on NLD and run the compatibility troubleshooter and apply recommended settings and try that

[2019-04-24 17:51:03] windshearfl : Set it as XP, working now. THANK YOU!

[2019-04-24 17:51:11] quad808 : Awesome sauce!

[2019-04-24 18:03:05] windshearfl : Last question: roughly how long does it usually take to prepare the NFZ patch? Seems stalled, hasn't changed in 10 minutes. I'm on a 250/50 connection.

[2019-04-24 18:08:41] lolo780 : A few min I think. Mine didn't take long.

[2019-04-24 18:20:08] quad808 : just wait. You are on .0100, right?

[2019-04-24 23:37:22] mldma : mp2 in stock .0100 firmware (cant download nld firmware in my side)

[2019-04-24 23:37:56] mldma : nfz patch seems ok ,but cant fly

[2019-04-24 23:39:45] mldma : from stock .0400 downgrade to .0100 via dji asst2

[2019-04-24 23:40:44] coldflake : @mldma when did you try to download firmware via nld?

[2019-04-24 23:41:06] coldflake : We just out up a global cdn so that the files are in your local region

[2019-04-24 23:41:23] mldma : 10hours before

[2019-04-24 23:42:01] coldflake : Could you please try again to see the performance? You can just close nld when it starts to upload to the drone

[2019-04-24 23:43:17] mldma : the download speed is very slow here so i use stock.100

[2019-04-24 23:44:21] coldflake : Ok but did you just try again to see if it downloads faster?

[2019-04-24 23:44:29] coldflake : It surely should at least

[2019-04-24 23:44:46] mldma : 45% battery for 15% nld firmware downloading progress and stop at 20%

[2019-04-24 23:45:12] mldma : its net problem

[2019-04-24 23:45:30] coldflake : Ahh ok locally?

[2019-04-24 23:46:25] coldflake : Because I do see users inside China pull the firmware files in around 70 sec

[2019-04-24 23:47:44] mldma : any different between .0.100(from .400) and nld .0.100 ?

[2019-04-24 23:48:59] coldflake : It's the same firmware file both from NLD and assistant

[2019-04-24 23:50:03] coldflake : But there might be a problem with the nfz patch showing 000 on the go app as version number

[2019-04-24 23:50:45] coldflake : After researching it the whole day I found out that in some cases it simply doesn't fully download the empty nfz db and fails silently

[2019-04-24 23:51:00] coldflake : That is mostly happening for our Asian users

[2019-04-24 23:51:20] coldflake : Which in turn is caused by the long distance and network issues

[2019-04-24 23:51:55] mldma : ok i ll change the net and retry

[2019-04-24 23:52:24] coldflake : So to remedy that we are moving everything into the global cdn system and I am currently sophisticating the download function so thst it will not be able to fail but instead keep hammering and resume

[2019-04-25 09:10:03] nopcode : throw exceptions instead of failing silently :wink:

[2019-04-25 09:12:12] nopcode : how does the upcoming FCC fix work? i mean, is it cumbersome to use?

[2019-04-25 09:13:25] nopcode : btw are you going to make the root exploit for the m2 public?

[2019-04-25 09:13:40] nopcode : if i a get a M2 i will pay for nld anyways, you guys deserve it

[2019-04-25 09:13:50] nopcode : just wondering what your plans are

[2019-04-25 10:40:53] coldflake : @nopcode Since when has nld been cumbersome to use?

[2019-04-25 11:04:44] coldflake : The FCC fix is very smooth actually, it comes out today if everything goes well

[2019-04-25 11:05:14] coldflake : There has been a few production critical issues that we had to take care of first

[2019-04-25 11:05:47] coldflake : For instance, it appears that some users can not get the nfz patch working even though everything gives thumbs up

[2019-04-25 11:05:58] wlliamchen : got a fix for bricked m2 today? @coldflake

[2019-04-25 11:06:43] coldflake : After spending hours and hours trying to figure out why it showed up with a nfz database of 00.00.000 in some case

[2019-04-25 11:07:02] coldflake : No matter how much it was removed or applied it was still the same

[2019-04-25 11:07:37] coldflake : It turns out out that various proxy servers are involved in the mix en route from the server to China

[2019-04-25 11:08:15] coldflake : At some point in the chain, a proxy server got it wrong and didn't get the whole nfz db file completely transferred

[2019-04-25 11:08:57] coldflake : It stil said it was OK resulting in the user getting the same corrupted nfz db missing some bytes in the end

[2019-04-25 11:09:39] coldflake : It kept happening and happening because the corrupted db now were cached somewhere along the way between the server and the user

[2019-04-25 11:10:27] coldflake : Absolutely ridiculous to say the least but apparently we can not expect anything of the internet backbone when it comes to Asia for instance

[2019-04-25 11:11:28] nopcode : weird that in this day and age a http file transfer can be corrupted

[2019-04-25 11:11:38] coldflake : The new update that comes out will make a check with the sever to ensure that it got the file correctly downloaded by doing a md5 check instead of just a byte size check

[2019-04-25 11:12:09] coldflake : Yes I think so too so I must be honest to say that I only checked the byte sisze

[2019-04-25 11:12:35] nopcode : *is trying to sell his mavic 1 to a colleague today, then i will immediately order a m2*

[2019-04-25 11:12:51] coldflake : What happens is the file is just zeros whee the missing bytes are but it still matches total byte size

[2019-04-25 11:13:06] nopcode : was waiting for the nld m2 support :slightly_smiling_face:

[2019-04-25 11:13:15] nopcode : @coldflake wtf...

[2019-04-25 11:13:19] coldflake : At least I know what is wrong and can fix it

[2019-04-25 11:13:58] nopcode : you grab that file from a server instead of shipping it with the client as part of the authentication that the user has paid, i guess?

[2019-04-25 11:14:23] nopcode : i mean, this forces the user to have a valid account

[2019-04-25 11:14:47] coldflake : Yes

[2019-04-25 11:14:50] coldflake : Correct

[2019-04-25 11:15:32] coldflake : Each an every content delivered over our cdn is AES encrypted with the license key among other things

[2019-04-25 11:16:15] nopcode : makes sense

[2019-04-25 11:17:42] coldflake : We just put up our cdn as a true global cdn

[2019-04-25 11:17:44] nopcode : what happened to the NFZ check btw? I read that it used to be redundant in the AC and the app, and now apparently for the M2 it's enough to patch it on the AC?

[2019-04-25 11:17:58] nopcode : did dji make it _easier_ to hack?

[2019-04-25 11:18:44] coldflake : It has always been like that mate, that the bird is autonomous in terms of nfz

[2019-04-25 11:20:20] nopcode : oh ok. does the RC have it's own database for displaying the "NEAR NFZ" caption?

[2019-04-25 11:22:13] coldflake : No it gets it from the bird of no app is present

[2019-04-25 11:22:29] nopcode : otherwise from the app? ok

[2019-04-25 11:22:46] coldflake : Yes

[2019-04-25 11:23:19] nopcode : does the go4 app (the stock one that i'd need to use to fly a M2 right now) phone home, documenting every flight you do?

[2019-04-25 11:23:48] nopcode : or is that reserved for when you unlock a zone (which i wouldn't need to do with the NLD FW patches)?

[2019-04-25 14:27:17] rickysuper : up to now. Do the bricked AC can fix ?

[2019-04-25 17:16:58] tommiboost : @coldflake so I'm still getting this?

[2019-04-25 17:17:26] coldflake : yes it is fixed in the release that comes out very soon

[2019-04-25 17:19:24] rickysuper : :100: :100:

[2019-04-25 17:48:03] quad808 : @tommiboost Here is the fix before NLD comes out with the new version: This error is usually cause by the missing Visual C++ Redistributable for Visual Studio 2015 on your Windows. You can solve the problem through installing the software. Here is the download to the install for Visual C++ Redistributable for Visual Studio 2015. 1. Download Visual C++ Redistributable for Visual Studio 2015 from Microsoft directly <https://www.microsoft.com/en-in/download/details.aspx?id=48145> If you find this doesn't solve the error after restarting the PC, run NLD in compatibility mode. Right click on NLD go to properties, compatibility tab, run compatibility troubleshooter. Follow the recommendations to run NLD in compatibility mode and try NLD again.

[2019-04-26 01:54:57] dronepilot : Still no M2 fcc on nld site, any news?

[2019-04-26 04:50:17] bjoneseying : is the nfz db on the bird also updated when updating F/W ?

[2019-04-26 07:13:42] lolo780 : Check your version #s before and after updates

[2019-04-26 15:10:12] windshearfl : Also my experience was you couldn't install VS 2015 without removing VS 2017. It kicked an error saying something about a new version already installed.

[2019-04-27 03:33:28] rainman : Fixed my DC NFZ problems yesterday when UPS brought me a Parrot ANAFI. :rolling_on_the_floor_laughing: Traveled out of the NFZ and Sparkie is f'ed even with a stock F/W install & Go4. So .. if I'm going to sell the beeyatch I'll be checking in from time to time to see if a new NLD cures it or if I'm gonna do a video of it in a douse & burn to send to DJI. Cheerz! :beers:

[2019-04-27 06:32:02] trollspeed : For ma i. Air stalls at the beginning :/

[2019-04-27 06:43:03] rickysuper : My friend tried the NFZ patched M2 and report back the result: White light flash when boot up. IOS official Go4 4.3.16 cannot take off at red no fly zone, still locked Android official Go4 can take off and fly within red no fly zone, but ! : After sometime the M2 was suddenly locked in the air, cannot control and land itself automatically ! A bad experience as it almost land on a critical government facilities.

[2019-04-27 06:55:15] lolo780 : What country/area?

[2019-04-27 06:55:36] lolo780 : 4.3.16 has some new NFZ data in the app

[2019-04-27 06:56:53] lolo780 : Try the blue zone

[2019-04-27 07:05:21] rickysuper : Even with 4.3.8 official Android, it can take off and fly but suddenly locked and land automatically ! Hong Kong

[2019-04-27 07:05:42] rickysuper : The patch seems not completed if just blue zone work

[2019-04-27 07:07:27] wlliamchen : you can try to boot the AC until white light flash before connect to RC and DJI GO

[2019-04-27 07:09:41] rickysuper : @wlliamchen we can try but no confidence

[2019-04-27 07:11:02] wlliamchen : my M2P work in this way

[2019-04-27 07:11:15] rickysuper : Many unknown factors surrounding

[2019-04-27 07:11:42] rickysuper : Thanks @wlliamchen

[2019-04-27 07:11:50] wlliamchen : if I turn on DJI GO and RC first, The NFZ patch will void.

[2019-04-27 07:13:12] wlliamchen : in this case you have to turn off everything and try it again.

[2019-04-27 07:17:42] bin4ry : also please report problematic zones with gps coordinates via the support system. we found that (in the US) there seem to be some hardcoded areas, maybe for HK too. if you send coordinates one can spoof gps to get there and test :wink:

[2019-04-27 07:26:46] rickysuper : Thanks @bin4ry I forward this message to my friend.

[2019-04-27 07:28:36] rickysuper : @wlliamchen Are you also from HK ?

[2019-04-27 07:37:10] wlliamchen : @rickysuper nop

[2019-04-27 07:37:40] rickysuper : Thanks @wlliamchen

[2019-04-27 07:38:12] wlliamchen : I went HK 2 months ago, nice place to visit

[2019-04-27 07:41:00] rickysuper : Using NLD patched drones. The Android or IOS device need to be offline ? Or can online to internet ? Thanks

[2019-04-27 07:48:36] wlliamchen : I go offline anyway,

[2019-04-27 07:49:53] rickysuper : But IOS cannot load the map if offline

[2019-04-27 07:52:13] wlliamchen : use the ‘cache map’ stuff

[2019-04-27 07:52:52] wlliamchen :

[2019-04-27 07:53:21] rickysuper : Thanks @wlliamchen

[2019-04-27 07:56:12] wlliamchen : browse map inside app before flight.

[2019-04-27 10:16:46] coldflake : Is anyone having problems with the nfz patch for M2? If so, I would like to know how that materializes so that we can evaluate what is going on in those cases.

[2019-04-27 10:27:21] wlliamchen : my M2P stop responding after NFZ patch removed. firmware ver.000 , USB link went down after reboot. but MacOS can discover it and firmware update fail at 75% .

[2019-04-27 10:32:02] wlliamchen : with error code 0x02e904

[2019-04-27 10:33:02] wlliamchen : NLD works great in firmware ver100

[2019-04-27 10:33:30] wlliamchen : without a problem

[2019-04-27 10:34:12] wlliamchen : I did contact DJI care

[2019-04-27 10:34:37] wlliamchen : they said it maybe a firmware update issue.

[2019-04-27 10:41:49] wlliamchen : only solution they gave, was send the bird back to DJI, they didn’t mention about the recent DJI assistant update.

[2019-04-27 10:48:04] rickysuper : My friend tried the NFZ patched M2 and report back the result: White light flash when boot up. IOS official Go4 4.3.16 cannot take off at red no fly zone, still locked Android official Go4 can take off and fly within red no fly zone, but ! : After sometime the M2 was suddenly locked in the air, cannot control and land itself automatically ! A bad experience as it almost land on a critical government facilities.

[2019-04-27 11:28:48] bin4ry : fw <=0000 is fucked up, it can happen to get that 75% flashing issue there. dji knows about it, well 0100 seems safe from my tests but <=0000 is dangerous. we removed nfz patch for the dangerous firmware now too, we don’t want people staying on it, ppl should update to 0100 and not make big jumps, better to go 1 by 1. as i tried to update from PRE 0000 to 0100 it bricked for me

[2019-04-27 11:33:47] wlliamchen : @bin4ry we all appreciate it, did you get ur bird out of the loop yet?

[2019-04-27 11:35:01] bin4ry : nope

[2019-04-27 11:36:55] wlliamchen : I packed my bird for DJI, i think it’s the best solution for now

[2019-04-27 13:16:54] kilrah : did people with bricks try to flash V00.06.0000 or V01.00.0000 ?

[2019-04-27 13:19:19] kilrah : I moved both out of the visible list on !ddd just in case

[2019-04-27 13:21:39] bin4ry : @kilrah most of the coming from that firmware and moving up

[2019-04-27 13:22:13] kilrah : so a normal upgrade?! not caused by downgrading previously?

[2019-04-27 13:23:10] kilrah : weird

[2019-04-27 13:23:15] bin4ry : mixed

[2019-04-27 22:14:46] andrwho25 : heh, is this firmware flashing supposed to take a while? stuck at 15% from 400 to 100

[2019-04-27 22:31:14] andrwho25 : hmm 30 mins later, still at 15%

[2019-04-27 22:31:19] quad808 : Should be about 15 minutes once the firmware is downloaded. MD5 module checking in the beginning, and it will appear "stuck"

[2019-04-27 22:31:35] andrwho25 : it's restarted atleast 20 times methinks

[2019-04-27 22:31:55] andrwho25 : well, the fan has gone on and off 20 times

[2019-04-27 22:31:58] andrwho25 : dunno if that's a restart

[2019-04-27 22:32:15] quad808 : you would know if it restarted.

[2019-04-27 22:32:29] andrwho25 : its concerning cause it says do not turn off device,

[2019-04-27 22:32:33] andrwho25 : its been atleast 30-45 mins

[2019-04-27 22:32:41] quad808 : did the status change at all?

[2019-04-27 22:32:44] andrwho25 : no

[2019-04-27 22:32:53] andrwho25 : still at 15%, empty bar for md5

[2019-04-27 22:33:06] quad808 : did you see the firmware download?

[2019-04-27 22:33:08] andrwho25 : yeah

[2019-04-27 22:33:16] quad808 : did it transfer to the drone?

[2019-04-27 22:33:19] andrwho25 : yeah

[2019-04-27 22:33:38] quad808 : restart the drone, but leave NLD connected, don't touch it

[2019-04-27 22:33:49] andrwho25 : k

[2019-04-27 22:34:01] quad808 : flashing should continue where it left off

[2019-04-27 22:34:12] quad808 : see if that doesn't kick start it

[2019-04-27 22:34:40] quad808 : if you turn on sound in windows, you will hear any restarts the drone does

[2019-04-27 22:35:33] andrwho25 : hmm nld didnt do anything

[2019-04-27 22:35:42] andrwho25 : well, just says the same thing as before

[2019-04-27 22:35:59] quad808 : turn on your RC and see if it connects to the drone

[2019-04-27 22:36:06] andrwho25 : yeah it did

[2019-04-27 22:36:09] andrwho25 : oh

[2019-04-27 22:36:10] andrwho25 : RC

[2019-04-27 22:36:11] andrwho25 : lemme try

[2019-04-27 22:36:40] andrwho25 : ya it says USB plugged

[2019-04-27 22:37:37] quad808 : k, I would disconnect from PC and turn off M2. Then close NLD and restart PC...then restart NLD and connect the drone again and fire it up

[2019-04-27 22:37:49] andrwho25 : kk

[2019-04-27 22:42:52] andrwho25 : should i attempt 400 to 300 to 200 to 100 ? or is 400 to 100 fine

[2019-04-27 22:44:52] quad808 : what does NLD show you are on?

[2019-04-27 22:45:12] andrwho25 : 400

[2019-04-27 22:45:14] quad808 : I would go to 300 first

[2019-04-27 22:45:17] andrwho25 : kk

[2019-04-27 22:49:04] andrwho25 : this time its flashing properyl to 300

[2019-04-27 22:49:07] andrwho25 : i see updates

[2019-04-27 22:50:50] andrwho25 : the dreaded 0901

[2019-04-27 22:53:44] andrwho25 : awesome 300 worked fine

[2019-04-27 22:53:46] andrwho25 : trying 200 now

[2019-04-27 22:53:54] lolo780 :

[2019-04-27 22:54:10] lolo780 : 4.3.16 update has brought new NFZ here

[2019-04-27 22:56:40] quad808 : It's always best to turn drone completely off between firmware flashes, and I would restart NLD while you are at it.

[2019-04-27 23:08:24] andrwho25 : oh oops, already started 100 :crossed_fingers:

[2019-04-27 23:13:10] andrwho25 : its working this time :+1:

[2019-04-27 23:18:59] andrwho25 : do i need a specific dji go ios version?

[2019-04-28 00:10:48] quad808 : nope

[2019-04-28 14:00:18] nopcode : does FCC vs CE make any difference on spark when flying without controller?

[2019-04-28 16:57:53] quad808 : No, since you are using your phone. Ok, that is just a guess. I fess up.

[2019-04-28 18:17:46] nopcode : well, the upstream bandwidth you need is much lower than downstream. if only the drone increased it's TX power one could naively think that you could get more range

[2019-04-28 18:18:29] nopcode : but i don't know much about RF or WIFI

[2019-04-28 19:59:21] nopcode : any news about that NFZ patch issue the guy had where the m2p auto-landed?

[2019-04-28 20:05:40] lolo780 : That's what happens if you take off or fly in to a nfz

[2019-04-28 20:07:38] nopcode : yeah but with the nfz patch that shouldnt happen... it's scary AF

[2019-04-28 20:09:21] lolo780 : Did he ever post flight details or log

[2019-04-28 20:09:48] lolo780 : I've tested the geo 2.0 nfz and no height limits or any issues

[2019-04-28 20:13:33] nopcode : no, he mentioned the mavic locked up and that it coudlnt be controlled and just auto-landed

[2019-04-28 20:14:05] nopcode : once these things are sorted out i'm looking forward to getting a m2p and NLD :slightly_smiling_face:

[2019-04-28 20:14:11] lolo780 : That's what happens. I've tried it before on stock firmware

[2019-04-28 20:14:43] lolo780 : Same thing happens if the fan malfunctions. Auto lands and nothing you can do about it.

[2019-04-28 20:15:18] lolo780 : The M1 sensed core board temp and if it gets hot, the PDM shuts down non essential functions to reduce heat.

[2019-04-28 20:15:29] lolo780 : The radio will shut down and RTH initiates.

[2019-04-28 20:15:56] lolo780 : That's smart programming. M2 will probably land in water....

[2019-04-28 20:18:21] nopcode : wtf :neutral_face:

[2019-04-28 20:18:32] nopcode : maybe i should cling to my m1 a bit longer

[2019-04-28 20:21:07] nopcode : i had it RTH in my parent's garden... wanted to go 10m up to show them the mavic and because there's a random ass airport a km away and 100m up it suddenly did that

[2019-04-28 20:22:05] nopcode : was so angry. i launched in tight spot, it could've crashed on descent

[2019-04-28 21:19:00] fredmicrowave : I have just tried Mp2 in NFZ again , 5mn flight, no issue . @lowellfoo780 What is the geo2.0 ?

[2019-04-28 21:40:07] quad808 : Any M2 users with NLD and latest stock GO, being forced to update fly safe database?? after using the NLD NFZ removal patch??

[2019-04-28 21:42:13] lolo780 : Nope

[2019-04-28 21:42:29] lolo780 : The bowtie shaped nfz

[2019-04-28 21:43:11] lolo780 :

[2019-04-28 21:45:42] abdo054 : @lowellfoo780 do you fly while on airplane mode?

[2019-04-28 21:46:11] abdo054 : Or it shouldn't matter?

[2019-04-28 21:47:50] lolo780 : Shouldn't matter. I use both.

[2019-04-29 05:03:36] coldflake : The guy who's bird auto landed, where in the world were he flying?

[2019-04-29 05:04:17] coldflake : We are coming out with a update for the nfz patch soon that will take care of the hardcoded nfzs built into the firmware

[2019-04-29 05:05:22] coldflake : DC area in the US and a load of places in China are hardcoded into the fw

[2019-04-29 05:27:16] rickysuper : @coldflake My friends M2 locked suddenly and autoland with Android 4.3.8 official apk. IOS 4.3.16 official still cannot take off.

[2019-04-29 05:27:43] rickysuper : Thanks @czokie

[2019-04-29 05:27:44] coldflake : What area was he in?

[2019-04-29 05:27:50] rickysuper : Hong Kong

[2019-04-29 05:28:22] rickysuper : But strange was that IOS 4.3.6 cannot take off (inside the red zone)

[2019-04-29 05:28:40] rickysuper : only Android 4.3.8 can

[2019-04-29 05:29:03] bin4ry : send some gps coordinates please

[2019-04-29 05:29:21] rickysuper : I told him to do

[2019-04-29 05:29:23] bin4ry : if in doubt send them to me in pm

[2019-04-29 05:29:40] bin4ry : ah ok that was this :wink:

[2019-04-29 05:36:16] rickysuper : I will send the GPS coordinates to you tonight. Thanks

[2019-04-29 07:23:36] nopcode : @coldflake great that you found the hardcoded nfzs :thumbsup:

[2019-04-29 08:16:34] cs2000 : @kilrah appreciate you moving that firmware out of the listed M2 folder. Ive just stuck them back in, but added a note at the top of the "Release Notes" bit saying they're not recommended to use. As long as theirs not something inherently wrong with a firmware package (as in, the copy i have is borked somehow) il leave it up. I want DDD to be a complete resource of all firmware's, good, bad or otherwise. Covering up/removing DJI's (sometimes) poor coding ability isn't high on my priority list, and my license makes it very clear that anything people do with the firmware from DDD is totally on their heads. :wink:

[2019-04-29 08:35:59] nopcode : what did you guys actually need the root exploit for? for dumping the fw from the AC? getting ecnryption keys? or is it actively needed on the user side of things?

[2019-04-29 08:36:02] kilrah : OK :smile:

[2019-04-29 08:49:57] cs2000 : @nopcode all of the above

[2019-04-29 11:20:15] trollspeed : Will their be any news for mavic.air? I can not change the firmware and tye oy thing i'mable to do is to change paramz

[2019-04-29 13:06:07] nopcode : i was wondering about the air as well. thinking about getting one

[2019-04-29 13:06:25] nopcode : but as things stand i guess i'll get a m2 eventually

[2019-04-29 13:10:51] coldflake : @trollspeed yes there will be FCC for sure and nfz patch most likely

[2019-04-29 13:11:00] coldflake : And signal boost

[2019-04-29 13:17:47] nopcode : oh

[2019-04-29 13:44:45] trollspeed : It freezes when i'm trying to flash any firmware

[2019-04-29 14:54:11] nopcode : with assistant 2 you can selectively flash the latest FW only to the RC by connecting it directly?

[2019-04-29 14:54:29] nopcode : and then use assistant and/or NLD to flash the 0100 FW to the AC?

[2019-04-29 14:57:39] kilrah : yeah

[2019-04-29 18:47:35] quad808 : Go will not update the NFZ unless you allow it, unless all of the sudden DJI is now pushing the update through the GO app. For the M1, use NLD GO 4.1.22 and you won't have that problem. For the M2, you will get the update message for NFZ, but just ignore it and don't update. Stay on .0100 firmware. Start up in this order RC--Bird get connection, then device with GO.

[2019-04-30 08:52:58] rainer.kerncn : Awesome work guys! I had left my M2P on 00.600 and first flashed with NDL to 01.00.0100 - no problem. Then applied the NFZ patch, again no problem. Booted. LED indicated patch active. Went outside and let the bird up around 5M and despite being in a NFZ on the very outer skirt it worked flawless. Although in general hoovering of my M2P doesn't impress me (so far on neither FW). Quite unstable but that's the bird I guess

[2019-04-30 08:57:28] rainer.kerncn : @coldflake question based on my previous MPP expierence, NLD showed that NFZ and altitude patch was not possible on latest FW. However with the steps to first flash down to the last one FW working, modifying the parameters and upload empty NFZ into the bird, then downloading latest FW and removing the right modules and flash manually the modified package let to working free latest FW (although NLD doesn't show the tick but guess that's fair as directly it will not work on the latest FW). Would the same process be possible on M2P? I simply exclude 901/907 from the latest M2P FW package and flash?

[2019-04-30 08:59:11] coldflake : 901 protects 801

[2019-04-30 08:59:55] coldflake : So if they are mismatched, I think it will end up at destination fucked

[2019-04-30 09:04:18] nopcode : m2 is unstable? wow, it seems they did a few things wrong compared to the m1

[2019-04-30 09:07:55] rainer.kerncn : @nopcode my expierence - rather disappointing. Same location and MPP stayed rock stable. M2P drifting side wise and heigt wise (around 2m) when just let the thing hover. Calibrated IMU several times incl. cold calibration. If I am the only one could only be that I have a faulty IMU. Also need to do some further testing on my Gimbal has on 00.600 it had problems to keep level but on 01.00.0100 haven't done yet enough testing if problem persists

[2019-04-30 09:09:51] rainer.kerncn : Loved my MPP so much but due to pilot error it ended up with a crash against a cliff and was unrecoverable - RIP

[2019-04-30 09:37:33] rickysuper : M2 should be very stable as I flied it for several months with no problems

[2019-04-30 09:47:43] nopcode : @rickysuper well, stable hovering at low altitude?

[2019-04-30 09:48:00] nopcode : @rainer.kerncn at low altitude? maybe you need to calibrate the VPS?

[2019-04-30 09:55:55] dronepilot : NLD any clue when will fcc be released for M2?

[2019-04-30 10:00:31] rickysuper : @nopcode yes, make sure you got enough GPS data. Or enough light for the VPS to work

[2019-04-30 11:13:17] rainer.kerncn : @nopcode and @rickysuper Thanks, was just doing some more testing and had 17/18 satellites. Now very stable, so either IMU or Firmware helped. But still facing issues that the horizon at the gimbal doesn't stay level. Any ideas what this could be?

[2019-04-30 11:14:42] rainer.kerncn : @coldflake I can confirm what you wrote earlier. I had flashed the NFZ patch without VPN and got Version mismatch error and couldn't fly. Switched on VPN reapplied NFZ patch and no issues. So for CN users I would recommend you add a remark on the NLD website that the NFZ patch works best with VPN

[2019-04-30 11:15:33] rainer.kerncn : BTW - Altitude was 7 meters for the hoovering test on which now it stayed stable

[2019-04-30 13:30:20] nopcode : @rainer.kerncn ok

[2019-04-30 13:30:59] nopcode : i still love my mpp :smile: dont know if i should get a m2

[2019-04-30 13:31:13] nopcode : but i only take still photos and for that the new camera would be great

[2019-04-30 13:45:07] fredmicrowave : The M2pro camera is great. @rainer.kerncn You must have a problem with this M2, horizon tilting (that was recurrent in the M1) got perfectly fixed, stability is amazing .

[2019-04-30 14:26:36] the_lord : M2E not the dual, also giving same error

[2019-04-30 14:29:03] bin4ry : @the_lord can you tell me the wm number?

[2019-04-30 15:20:58] the_lord : @bin4ry WM245

[2019-04-30 16:37:59] zapf : for the mavic 2, under flight controller, are all the greyed out options just stuff that hasn't been able to be altered yet for this bird?

[2019-05-01 12:03:21] cs2000 : Yes

[2019-05-01 23:31:41] rickysuper : Actually the camera and gimbal are not working well under FW .100. Focus, gimbal stability and photo quality not good. May not be the issue of the patcher.

[2019-05-01 23:59:39] ben_lin : I remember they updated the fw and did improve

[2019-05-01 23:59:54] ben_lin : And .0100 was pretty early fw

[2019-05-02 02:18:08] andrwho25 : oh really, whats wrong with camera in 100?

[2019-05-02 02:35:54] rainer.kerncn : Would love to try 400 but as indicated the mix & flash wouldn't work so I loose NFZ patch. Without the patch I can't even fly in my garden at 5 meter height as I am at the outer end of a NFZ. But on the other hand the non-level horizon really bothers me as well.

[2019-05-02 02:44:20] rainer.kerncn : Any detailed change logs on the modules they updated in each firmware? Like e.g. <https://mavicpilots.com/threads/how-to-rollback-mavic-firmware.22871/page-20>

[2019-05-02 02:45:43] rainer.kerncn : Not sure if it is worth a try to mix the latest Gimbal and Camera module FW from 400 into 100 for a flash. Any thoughts on this?

[2019-05-02 06:33:34] rickysuper : @andrwho25 focus, stability and photo quality all got issues compare with higher FW version.

[2019-05-02 06:36:39] andrwho25 : weird. my image looks pretty good haha

[2019-05-02 06:37:35] bin4ry : it does? i really didn't notice any difference at all ^^ but that might be just me lol

[2019-05-02 07:02:16] lolo780 : <https://kuula.co/post/7klBd> M2P 0100 fw

[2019-05-02 16:07:02] trollspeed : Sorry for noob question but to get nfz working on mavia air do i have only to reflash drone with nld firmware?

[2019-05-02 16:20:48] kilrah : there is nothing available for mavic air at this point.

[2019-05-02 16:20:58] cantrepeat : according to the birdmap <https://nolimitdronez.com/birdmap> NLD does not support the mavic air

[2019-05-02 16:21:15] cantrepeat : as far as NFZ go

[2019-05-03 09:55:59] nopcode : whats the progress on removing the remaining hardcoded NFZ, the FCC thing and porting to 400 fw?

[2019-05-03 11:23:16] bin4ry : lol, so what’s the progress overall? :joy:

[2019-05-03 11:23:28] bin4ry : being worked on :wink:

[2019-05-03 11:23:52] bin4ry : fcc is ready to roll out, needs optical finish think will be done soon

[2019-05-03 11:26:51] nopcode : i'm on the edge of buying a m2 because of nld :smile:

[2019-05-03 11:27:17] nopcode : any plans of disabling droneid?

[2019-05-03 11:27:31] nopcode : or blanking out the serial number that is transmitted?

[2019-05-03 12:55:42] coldflake : @nopcode yes, drone id is going to be available for fuckery in a very short period of time

[2019-05-03 12:57:45] nopcode : woohoo

[2019-05-03 15:47:44] trollspeed : Any plans for MA?

[2019-05-03 16:44:18] nopcode : can you currently downgrade from any m2 FW that exists back to 0100?

[2019-05-03 16:49:33] kilrah : yes

[2019-05-03 23:30:47] dronepilot : Hi guys when will FCC be available on NLD, nfz working great on SC even on wifi. Big issue for night flyers like me that white bottom led doesn’t work anymore even when auto isso on. Thanks

[2019-05-04 00:47:43] lolo780 : Are you sure? I've been using the landing lights to see my flight path going away.

[2019-05-04 06:54:46] coldflake : We are working hard on pushing the FCC release tonight

[2019-05-04 06:55:15] coldflake : Strange with the white led though

[2019-05-04 07:42:36] lolo780 : Just checked and the lights work for me. Look like a UFO at night.

[2019-05-04 10:11:35] dronepilot : Led light on mine M2 stays off on app will try manually turn to auto.

[2019-05-04 10:12:53] dronepilot : Thanks @coldflake hope everything goes great on fcc.

[2019-05-05 04:35:44] lolo780 : <https://youtu.be/uRExdUTcEL4>

[2019-05-05 04:35:54] lolo780 : Good advertising for using NLD

[2019-05-05 06:27:45] ben_lin : @coldflake

[2019-05-05 06:28:00] ben_lin : U might wanna check NLD accessibility from China

[2019-05-05 06:28:25] ben_lin : I have a few friends saying that they can’t access the site

[2019-05-05 08:37:06] coldflake : @bin4ry

[2019-05-05 08:37:13] coldflake : Wow that sucks balls

[2019-05-05 08:38:47] coldflake : @lowellfoo780 That has nothing to do with nld as far as I can tell

[2019-05-05 08:39:08] coldflake : It seems like it's a time scheduled no fly zone

[2019-05-05 08:39:34] coldflake : And his problem is that when it kicks in it just lands

[2019-05-05 08:40:40] coldflake : In fact, if he had just used nld it would not have happend :)

[2019-05-05 08:41:24] coldflake : @lowellfoo780 sorry, now I understand what you mean, too little coffee yet :)

[2019-05-05 08:43:46] coldflake : That's pretty fucked up by dji, 15 sec warning and then auto land

[2019-05-05 08:43:51] coldflake : Ridiculous

[2019-05-05 08:47:32] coldflake : @ben_lin where in China are they located?

[2019-05-05 08:47:53] coldflake : @ben_lin also what isp do they use?

[2019-05-05 08:57:43] nopcode : time scheduled? you think airplane mode would've helped?

[2019-05-05 08:57:53] nopcode : or do you think the app has the schedule downloaded in advance?

[2019-05-05 09:05:15] nopcode : can you somehow firewall the go4 app so it can only access maps, on android?

[2019-05-05 09:59:02] dronepilot : Fcc :see_no_evil:

[2019-05-05 12:19:09] are_ari : Why when after removing nfz M2 now stop the connection with rc and the small red lamp is on and off

[2019-05-05 12:52:22] dnacho : @cs2000 do you know if this p4p could have the nfz removed? With the latest dji nfz one city of my country is pretty much a nfz and the municipality needs to fly their drone

[2019-05-05 12:52:41] dnacho : I really mean all nfz

[2019-05-05 12:53:54] bin4ry : @Dikoo: you fucked up, i said you should not try to access the drone yourself

[2019-05-05 12:54:11] bin4ry : why did you rename yourself?

[2019-05-05 12:55:13] are_ari : I used nld

[2019-05-05 13:03:41] bin4ry : well there are 2 possibilities. the flashing of the 0100 firmware coming from 0000 did abort and caused this, this is what happened to the users before and it is caused by dji a “good” flashing code. the second possibility is that you tried to access our root method and maybe even succeeded (you have posted screenshots of it) and fucked up your filesystem. solution is depended on what you really did. as you were not honest before i think you fucked up your filesystem. also funny that you tried to claim that you rooted the drone yourself a few times and now you need nld? a bit strange all, along with your name change :wink:

[2019-05-05 13:06:59] are_ari : m2 was for my friend who has removed nfz in nld program

[2019-05-05 13:07:58] are_ari : I did not do anything for m2

[2019-05-05 13:08:54] are_ari : This is the software version 00.06.0000

[2019-05-05 13:17:29] bin4ry : nfz patch can only be applied to 0100, we removed the patches for 06.0000 and 00.0000 as this firmware versions are unstable and causes this issue you describe. it has nothing to do with the nfz patch but with the firmware and djis flashing mechanism. that is why we only whitelisted 0100 now. we recommend to update/downgrade to 0100 immediately due to this. in dji forums there is even a thread about this from october 2018 when the mavic 2 was released ...

[2019-05-05 13:18:08] bin4ry : only solution seems to be to be lucky (keep flashing and let it sit there) or send it back to dji. dji will repair it for free eventually as this is a known issue to them and their fault

[2019-05-05 13:18:26] bin4ry : read the dji forum i don’t have the link reads as i am on my phone

[2019-05-05 13:55:02] lolo780 :

[2019-05-05 13:55:26] lolo780 : M2P, NLD, RCs on 0400 and both linked

[2019-05-05 13:56:06] lolo780 : 2nd RC ids as secondary

[2019-05-05 14:01:34] dronepilot : Nice Lolo fw on MC .100?

[2019-05-05 14:01:53] lolo780 : Yep, NLD patched

[2019-05-05 14:04:02] dronepilot : Great info Lolo, thanks mate.

[2019-05-05 14:09:07] lolo780 : Confirmed the slave RC can tilt & yaw the M2P camera in flight.

[2019-05-05 14:20:50] nopcode : wait, what does that confirm? that you can fly m2 with 2 controller?

[2019-05-05 14:21:06] lolo780 : Yes, and have NLD

[2019-05-05 14:21:17] lolo780 : Dont need 0400 fw on the AC

[2019-05-05 14:21:35] nopcode : i see... but 0400 support is coming eventually right?

[2019-05-05 14:21:42] nopcode : or did they add additonal protections from 100 to 400?

[2019-05-05 14:21:54] lolo780 : Dunno

[2019-05-05 14:22:42] nopcode : has the 400 fw been dumped?

[2019-05-05 14:22:46] nopcode : unencrypted?

[2019-05-05 14:23:02] lolo780 : I'm going to try flashing my camera to 0400 and install it back

[2019-05-05 14:23:08] lolo780 : No idea

[2019-05-05 14:23:42] nopcode : 0100 still has issues, or so i've read?

[2019-05-05 14:25:32] lolo780 : What issues?

[2019-05-05 14:25:48] lolo780 : Are you flying 0100?

[2019-05-05 14:28:20] nopcode : no, but i'll get my m2 on tuesday

[2019-05-05 14:28:25] lolo780 : Pro or zoom

[2019-05-05 14:28:28] nopcode : pro

[2019-05-05 14:28:47] lolo780 : Nice. I haven't noticed any difference from 0300 to 0100

[2019-05-05 14:29:15] lolo780 : I use dji pilot or litchi for waypoints.

[2019-05-05 14:29:44] nopcode : litchi still has the issues with jerky turns right? for video

[2019-05-05 14:29:52] lolo780 : Or drone deploy. Yes.

[2019-05-05 14:30:04] nopcode : i think i will fly stock and wait for the hardcoded NFZ to be removed and the FCC mode

[2019-05-05 14:30:17] nopcode : then i'll buy NLD even if it means going back to 0100, after your experience

[2019-05-05 14:30:52] lolo780 : I'd like to know if anyone else finds a difference from downgrading.

[2019-05-05 14:34:25] nopcode : well i don't use fancy features most of the time

[2019-05-05 14:34:53] nopcode : but i'd like to have stability and things like precision landing and the lateral sensors in POI mode seem like they would be nice to have

[2019-05-05 14:38:22] lolo780 : 9

[2019-05-05 14:39:35] lolo780 : I wonder how well the side sensors work as they're only single cameras

[2019-05-05 14:40:30] nopcode : i guess you'd have to track stuff getting bigger when approaching

[2019-05-05 14:40:37] bin4ry : i haven’t noticed any difference. except this gpa coordinates in the pictures, but i haven’t confirmed this myself.on my 0100 drone i can also set waypoints, i think it is an app feature and not firmware, but someone who actually flies the drone needs to confirm this for me :joy:

[2019-05-05 14:41:28] nopcode : i dont use the gps exif that often

[2019-05-05 14:41:42] lolo780 : Makes sense it's an app feature since dji pilot could do waypoints from the beginning of M2

[2019-05-05 14:43:00] lolo780 : 0300 battery firmware fixed the temperature bug. Luckily you can flash your batteries only.

[2019-05-05 14:44:05] nopcode : oh

[2019-05-05 14:44:11] nopcode : ok i will upgrade to latest when i get the bird

[2019-05-05 14:44:19] nopcode : do you have to do anything to flash a battery?

[2019-05-05 14:44:27] bin4ry : yeah ok, battery might be another thing, but 0400 didn’t do anything for me

[2019-05-05 14:44:39] nopcode : woa WTF that POI 2.0 mode looks awesome!!

[2019-05-05 14:44:47] nopcode : with optical tracking when circling

[2019-05-05 14:44:48] lolo780 : You need another AC

[2019-05-05 14:45:08] nopcode : @lowellfoo780 na i mean i plan to upgrade everything to latest stock at first

[2019-05-05 14:45:18] lolo780 : Ah

[2019-05-05 14:45:19] bin4ry : why that?

[2019-05-05 14:45:40] nopcode : so the RC is up to date because of the battery drain thing and apparently the batteries need that update to

[2019-05-05 14:45:46] bin4ry : flash rc to 0400 only

[2019-05-05 14:45:47] nopcode : and then later i could downgrade just the AC, right?

[2019-05-05 14:45:59] bin4ry : you can connect it to the pc directly and flash it standalone

[2019-05-05 14:46:34] nopcode : hm ok

[2019-05-05 14:46:43] lolo780 : Yeah, I used duml

[2019-05-05 14:46:48] lolo780 : Dumldore

[2019-05-05 14:47:40] bin4ry : atleast don’t go over 0400 if there in case they push something newer until your drone arrives

[2019-05-05 14:47:59] nopcode : @bin4ry ok i was wondering about that, thanks

[2019-05-05 14:48:21] bin4ry : 0400 is safe to downgrade, there is no 0500 yet but i wouldn’t risk it

[2019-05-05 14:48:33] nopcode : does the app tell you which version it's gonna install?

[2019-05-05 14:48:40] bin4ry : yes

[2019-05-05 14:48:47] nopcode : ok good, then i'll watch out for that

[2019-05-05 14:48:49] bin4ry : you can also select the version in the app

[2019-05-05 14:48:53] nopcode : oh wow

[2019-05-05 14:48:59] bin4ry : there was a hidden flash menu somewhere

[2019-05-05 14:49:45] bin4ry : i think long press the menu on the upper right or something similar

[2019-05-05 14:49:51] nopcode : may i ask how the upcoming fcc fix works? no worries if you wanna keep it secret

[2019-05-05 14:49:58] nopcode : i see

[2019-05-05 14:50:09] bin4ry : fcc will be done on the drone side

[2019-05-05 14:50:30] bin4ry : so you will get it no matter of the controller/app etc

[2019-05-05 14:50:42] nopcode : oh. but that increases signal strength from the controller as well?

[2019-05-05 14:50:48] bin4ry : yes

[2019-05-05 14:50:48] fredmicrowave : Yes, long press the 3 horizontal bars on top right calls flash menu

[2019-05-05 14:50:49] nopcode : that's cool!

[2019-05-05 14:51:13] nopcode : awesome. can't wait to get the m2 and take pictures of the beautiful castles around here :slightly_smiling_face:

[2019-05-05 14:51:14] bin4ry : the protocol adjusts the whole system accordingly

[2019-05-05 14:51:32] bin4ry : where you at?

[2019-05-05 14:51:48] bin4ry : so which castles :european_castle:?

[2019-05-05 14:52:05] nopcode : pfalz... not too far from the weinstrasse

[2019-05-05 14:52:06] lolo780 : Whitecastle

[2019-05-05 14:52:21] nopcode : wait lemme find some shot

[2019-05-05 14:53:12] bin4ry : nice!

[2019-05-05 14:53:49] bin4ry : i need to actually fly my drone some day too

[2019-05-05 14:53:59] bin4ry : and make some nice shots here

[2019-05-05 14:54:30] fredmicrowave : Fwiw, altitude info is in photos exif , may be good to know

[2019-05-05 14:56:27] fredmicrowave : Exif pilot is a free app that can remove or edit all exif info.

[2019-05-05 14:56:43] lolo780 :

[2019-05-05 14:57:23] lolo780 : M2P, stock battery, FCC

[2019-05-05 14:58:01] bin4ry : cool! but this is not line of sight anymore, right? :joy:

[2019-05-05 14:58:19] lolo780 : Sure it is

[2019-05-05 14:58:31] lolo780 : 5 and 4 signal

[2019-05-05 14:58:34] fredmicrowave : You hold it in you hand and run ?

[2019-05-05 14:59:05] nopcode : <https://imgur.com/a/RHbZeHr>

[2019-05-05 14:59:10] nopcode : here are some pics i took with my M1

[2019-05-05 14:59:12] lolo780 : Wow

[2019-05-05 15:00:18] nopcode : looking forward to more dynamic range and sharpness :heart:

[2019-05-05 15:00:46] nopcode : oh btw is anyone looking into increasing the bracketing step size?

[2019-05-05 15:00:58] lolo780 : Yeah it's a big step up

[2019-05-05 15:01:00] nopcode : it would be awesome to have +- 2 EV steps for hdr

[2019-05-05 15:01:12] fredmicrowave : I lower exposition for about 0.7 on almost all my shots

[2019-05-05 15:03:10] fredmicrowave : (To help for the relative lack of dynamic range )

[2019-05-05 15:03:48] fredmicrowave : You cant get back info from a burned image, but you can from a too dark one

[2019-05-05 15:04:15] nopcode : i just bracket everything

[2019-05-05 15:04:46] nopcode : storage is cheap and if i invest the effort to go somewhere and fly i can wait a second for it to take 5 images instead of 1

[2019-05-05 15:05:26] nopcode : ohh btw is yaw drift fixed in the M2? I had that sometimes in my p3a and also observed it in the m1... like you fly to some point, let go of the sticks and it will turn a bit

[2019-05-05 15:05:33] fredmicrowave : I usually don't like hdr too much, but i will have to try bracketting more

[2019-05-05 15:05:39] nopcode : i figure that the optical compass algorithms might fix this?

[2019-05-05 15:06:15] nopcode : @fredmicrowave "HDR" doesnt imply tone-mapping which is what is typically considererd the "hdr effect"

[2019-05-05 15:06:41] nopcode : in lightroom it just gives you a neutral picture with more bits to play with

[2019-05-05 15:07:01] fredmicrowave : Seem cool. Will try :slightly_smiling_face:

[2019-05-05 15:07:55] nopcode : i usually first group the 5 sets of pictures, then ctrl+H on each group to merge them to hdr

[2019-05-05 15:08:25] nopcode : i mean, i group each set of 5 bracketed pictures to a stack

[2019-05-05 15:46:51] nopcode : i just saw that the m2 takes a spherical panorama in like 30s in asteroid mode

[2019-05-05 15:47:26] nopcode : super cool

[2019-05-05 15:48:03] nopcode : are the go4 automatic panoramas any good? i mean are the source images ok? overlap etc?

[2019-05-05 15:48:09] nopcode : assuming you stitch manually on the desktop

[2019-05-05 17:26:05] lolo780 : The M2 panos are very good. Much better than previous.

[2019-05-05 17:26:34] lolo780 : The auto stitch in app

[2019-05-05 17:39:56] nopcode : DNG output?

[2019-05-05 18:20:20] lolo780 : File size is bigger. 4k x 2k before, m2 is 8k x 4k. Jpg

[2019-05-05 18:50:39] rickw001 : I'm starting to get the itch,is mavic 2 range that much better?

[2019-05-05 18:58:07] rickw001 : I have a lot of interference around my home

[2019-05-05 18:58:42] lolo780 : Better than? Occusync 2 is really good.

[2019-05-05 18:58:58] rickw001 : I have mavic pro

[2019-05-05 18:59:24] lolo780 : Oh yes it's much better than any 2.4 only

[2019-05-05 18:59:58] rickw001 : Damn,I was afraid you would say that,lol

[2019-05-05 19:01:11] lolo780 : <https://youtu.be/6RZYogV7OxY> M2P, FCC with reflector.

[2019-05-05 19:01:54] lolo780 : 20km round trip, stock battery, video is the 1080p live view from device.

[2019-05-05 19:02:34] lolo780 : Line of sight I see 11Mbs at 10km away

[2019-05-05 19:05:59] rickw001 : great video,if I use Titan Atlas or boost,I can get a mile,running stock at 1000' my signal drops in half and gets spotty

[2019-05-05 19:07:02] rickw001 : what reflector do you use?

[2019-05-05 19:15:24] lolo780 : Sunnylife

[2019-05-05 19:15:57] rickw001 : kk,thanks,I will check amazon

[2019-05-05 19:16:11] lolo780 : Happy shopping

[2019-05-05 19:16:40] rickw001 : Thanks for your expensive help,lol

[2019-05-05 19:17:34] rickw001 : Looks like I might sell one of my mavics,the new one in the box

[2019-05-05 19:19:23] lolo780 : Good plan.

[2019-05-05 19:22:41] rickw001 : last question,will mini4 fit rc arms?

[2019-05-05 19:26:38] lolo780 : Not sure. You can mod the arms same as M1 to widen their spacing.

[2019-05-05 19:27:20] rickw001 : kk,I had heard you couldn't widen the new rc

[2019-05-05 19:27:32] nopcode : i bought a car tablet holder

[2019-05-05 19:27:40] nopcode : removed the suction cup

[2019-05-05 19:28:17] nopcode : and designed and printed an adapter

[2019-05-05 19:28:22] nopcode : to fit the RC

[2019-05-05 19:28:29] nopcode : and hold the tablet elevated and at an angle

[2019-05-05 19:28:35] rickw001 : does the Sunnylife fit the mavic1 and 2 ?

[2019-05-05 19:28:48] lolo780 : Yes, same antenna shape and spacing

[2019-05-05 19:29:04] rickw001 : :grinning:

[2019-05-05 19:29:11] lolo780 : Best $12 you could spend

[2019-05-05 19:29:12] nopcode : so those reflectors actually work?

[2019-05-05 19:29:29] lolo780 : Yes, you can see the bitrate difference on and off

[2019-05-05 19:32:08] nopcode : ok bought :smile:

[2019-05-05 19:36:22] rickw001 : can't find on amazon,only way is with hood

[2019-05-05 19:42:53] rickw001 : found them:grinning:

[2019-05-05 22:48:11] dronepilot : @lowellfoo780 question how did you update M2 battery to .300 on fw .100? Thanks

[2019-05-05 22:48:31] lolo780 : With another M2

[2019-05-05 22:49:41] lolo780 : Get a friends on latest FW and put your battery in. You'll get the inconsistent firmware popup and slide to update.

[2019-05-05 23:22:12] abdo054 : Is there another way?

[2019-05-06 00:24:18] dronepilot : Understand Lolo, appreciate your info. I’m currently on fw .100 and didn’t se any issue on the battery. Could you explain the bug, maybe i have something that i didn’t see. Thanks

[2019-05-06 04:53:50] d95gas : @lowellfoo780 Can you put up a pic or link to the reflector you are using? unsure which model you are using, and would be interested as your demo's seem to prove they work

[2019-05-06 05:19:48] ben_lin : @coldflake Location is Guangdong province

[2019-05-06 05:19:55] ben_lin : ISP idk

[2019-05-06 05:20:03] ben_lin : Let me recheck on him

[2019-05-06 05:53:03] reaktor : Its a shame we can't have .0300 for FCC, etc. I found it fixed the Panorama mode in Sphere mode and the addition of the side sensors in Hyperlapse mode saved me from getting tangled in a tree. We lose these & other features in .0100. The OG's know their stuff, perhaps later firmwares can be tackled in the future.

[2019-05-06 06:07:55] bin4ry : who knows that they won’t? one after the other, keep calm guys :wink:

[2019-05-06 06:10:14] bin4ry : and are you sure that this features are not available on 0100? the features, sticking and the side sensor doesn’t read like it would be a firmware thing but app. did you try if they are really not available on lower firmware? if dji claims that you need it it’s not always true

[2019-05-06 06:30:29] nopcode : but the sensors must act in realtime so must be implemented on AC i would've thought?

[2019-05-06 06:30:34] nopcode : also precision landing is cute :smile:

[2019-05-06 06:33:54] nopcode : but i would like the lateral sensors mostly for POI circling, and thats a 0200 addition

[2019-05-06 06:38:11] nopcode : you already support some mods on 0200 i just saw, cool

[2019-05-06 06:46:52] lolo780 :

[2019-05-06 06:47:09] lolo780 : @d95gas

[2019-05-06 07:13:00] d95gas : @lowellfoo780 Ah yes, thought that was what you were talking about, have them sat in my Amazon car. many thanks for confirming.

[2019-05-06 11:25:46] rickw001 : does the brand make a big difference?Only Sunnylife I can find is the combo with hood for $25 or the ones for smartcontroller

[2019-05-06 13:16:30] dronepilot : Smart Controller with fcc, thanks for the second rc running on .400 tip @lowellfoo780

[2019-05-06 15:35:46] d95gas : @rickw001 Been looking at these as well thanks to Lolo780. I think they are all much the same, here in the UK, there are a couple of Sunnylife, but the majority are Hensych and even they had "Sunnylife" printed on them. The other make we see a lot of is "Tamlltide" but they all look the same and I guess they all do exactly the same job as all they are is a reflector. Guy on the Anafi forum made his own out of a plastic collander covered in tin foil, the range he got was mental.

[2019-05-06 15:40:37] mr.vibez : I've never had any luck with them reflectors. Very directional and no noticeable gain in range. Maybe an improvement in video transmission. Of course, your mileage may vary

[2019-05-06 16:18:08] d95gas : For the sake of £8 its worth a punt. Lolo780 seems to do ok with them, but that doesnt mean everyone will have the same success

[2019-05-06 16:55:32] lolo780 : Make sure to use manual channel selection as I noticed auto doesn't always do the best job. Watch your bitrate to gauge signal quality.

[2019-05-06 17:06:04] dronepilot : @lowellfoo780 do you set 10 or 20 manual channel?

[2019-05-06 17:26:54] wouter : interested in doing this, how is this accomplished?

[2019-05-06 17:51:40] lolo780 : 20, unless there's a lot of noise. 5.8 is usually ok.

[2019-05-06 17:52:26] lolo780 : 2.4 has so little space. Would like to try force 2.3 or 2.5 on the M2

[2019-05-06 17:53:46] lolo780 : Be aware when using 5.8 that if signal is lost, the M2 seems to search on 2.4. If you're in a high interference area, you may not reestablish connection for a while. Set RTH accordingly.

[2019-05-06 18:39:10] bin4ry : i need to verify this but i think with our nld approach you will get 2.3/2.5 will verify tomorrow or the day after when i am home again

[2019-05-06 18:39:35] bin4ry : or maybe with luck @coldflake releases the version earlier even

[2019-05-06 19:03:52] coldflake : Yes we are working on forking it out tonight or at least tomorrow

[2019-05-06 19:11:55] kilrah : interersting, wonder if the goggles also work fine if just the RC is on 400, will have to test

[2019-05-07 11:49:56] nopcode : @bin4ry @coldflake so that puts its outside of any interference?

[2019-05-07 12:15:39] reaktor : The side sensor activated in .0300 saved me when I was in Hyperlapse mode. While the drone was setting itself up and flying sideways it stopped in a tree before it hit the actual branches. If I was running .0100 it would have flown sideways right into the tree. So the side sensor worked well for me on that occasion.

[2019-05-07 13:06:19] nopcode : can you easily downgrade from any M1 firmware?

[2019-05-07 13:06:35] nopcode : selling my M1 with the old fw, considering updating everything to latest first

[2019-05-07 13:19:06] dnacho : @bin4ry @coldflake @cs2000 do you know if this p4p could have the nfz removed? With the latest dji nfz one city of my country is pretty much a nfz and the municipality needs to fly their drone. I mean really remove all nfz

[2019-05-07 15:22:41] cantrepeat : @pabloiarriola The bird map <https://nolimitdronez.com/birdmap> shows that a few firmware versions for the p4pro can have the NFZ removed.

[2019-05-07 17:49:17] nopcode : i flew again the other day with a patched go4 app (had used deejayeye-modder back then)

[2019-05-07 17:49:20] nopcode : but there was no map

[2019-05-07 17:49:22] nopcode : what happened there?

[2019-05-07 18:58:58] bin4ry : @nopcode you asked if spoofing worked for m2, it works

[2019-05-08 01:21:40] dronepilot : NLD friends when will we have M2 fcc? Thanks

[2019-05-08 05:21:23] nopcode : @bin4ry cool. could you reproduce triggering a hardcoded NFZ?

[2019-05-08 05:31:15] nopcode : wonder what happens if you blast a flying mavic with that

[2019-05-08 05:33:03] bin4ry : @nopcode give me some time mate, i am working like 3 projects at the same time next to my normal 8hrs dayjob :joy:

[2019-05-08 06:04:02] nopcode : haha sure, no worries

[2019-05-08 06:04:11] nopcode : just curious :smile:

[2019-05-08 11:47:39] fredmicrowave : @rgf8aerial soon™

[2019-05-08 12:07:04] dronepilot : Thanks @fredmicrowave

[2019-05-08 15:25:30] cantrepeat : I have a © on soon™

[2019-05-08 23:13:22] zapf : I'm interested in modifying the AEB shooting mode - I (and a few others) wanted to change the + and - ev stops it took its 3/5 photos at. Is that something that would be done bird side, or app side?

[2019-05-09 00:02:44] lolo780 : My guess would be app side. Can litchi or any other apps do it?

[2019-05-09 02:58:48] lolo780 : Hm.. my M2 lost the NFZ patch. Going to repatch it

[2019-05-09 02:59:20] lolo780 : DJI doing something? Have not touched the firmware and always decline any updates.

[2019-05-09 02:59:28] lolo780 : 4.3.16 app

[2019-05-09 03:06:17] lolo780 : Confirmed the flight control serial number shows up and the NFZ database is back.

[2019-05-09 03:16:47] rickysuper : NFZ patch not completely work with my friend's M2. Can take off within red zone but will lock and auto land after some time. He gave up temporarily, too dangerous to have further test.

[2019-05-09 03:48:25] zapf : The googling I did implied otherwise <https://mavicpilots.com/threads/litchi-aeb-settings.23603/> I'll try with a modern litchi on Mavic 2 though

[2019-05-09 06:00:35] nopcode : @rickysuper are you the guy who reported this before?

[2019-05-09 06:01:08] nopcode : @zapf omg i want that too. so much.

[2019-05-09 06:01:15] rickysuper : Yes, but my friend didn't sent me the GPS coordinates

[2019-05-09 06:03:37] nopcode : okay

[2019-05-09 06:04:16] nopcode : NLD NFZ removal is based on removing the NFZ db file right? how about patching the code that does the "inside" check instead?

[2019-05-09 06:07:22] nopcode : i wonder whz the autoland only happens after a while... maybe there's a separate watchdog process that runs once in a while and checks against the separate NFZ list...

[2019-05-09 06:14:27] rickysuper : Modder said some NFZ may be hard coded and need remark, waiting for the next upgrade to have test

[2019-05-09 06:34:17] lolo780 : The landing light stopped flashing on boot up as well. Repatched and everything back to normal.

[2019-05-09 06:49:45] nopcode : is that landing light flashing some custom NLD code?

[2019-05-09 06:50:07] nopcode : or is it a builtin thing that triggers somehow when the NLD changes are applied?

[2019-05-09 06:52:20] nopcode : @rickysuper did you get the coordinates from your friend now?

[2019-05-09 06:58:05] rickysuper : Landing light flashing when bootup. My friend didn't sent me the coordinates. We are in Hong Kong.

[2019-05-09 06:59:42] nopcode : can you ask him or doesn't he want to tell you? i think it might help debug the issue

[2019-05-09 06:59:43] lolo780 : NFZ patch flashes the landing light on startup. Nice way to confirm. Will keep an eye out for it every time.

[2019-05-09 07:06:31] nopcode : yeah, that's reassuring. but this whole autolanding crap is scary AF. DJI are assholes in that regard.

[2019-05-09 07:47:40] rickysuper : @nopcode He seems not want to share the data, he said so scared to try again. :(

[2019-05-09 07:49:08] rickysuper : The drone just being locked up suddenly and then auto land. Almost landed on a Jail area.....

[2019-05-09 07:54:15] rickysuper : With official IOS 4.3.16. It cannot take off, he then tried using Android official 4.3.8 and can take off finally, but locked up and auto land issue happened afterwards. He doesn't update any database ever.

[2019-05-09 08:47:52] validat0r : Flying over a jail not so smart in the first place, eh?

[2019-05-09 15:23:57] rickysuper : Flying over airport also not so smart, right?

[2019-05-09 17:38:09] quad808 : Remember to ALWAYS start up in this order: RC-->Bird, get connection, then and only then, connect device and GO app. This will minimize the Stock GO app from possibly overriding the NFZ patch. Of course, there is always the risk that !DJI will send a command to have GO override everything.

[2019-05-09 18:34:40] wouter : are we able to intercept communication from controller to drone? if so, this could be a potential attack vector to send params to the drone

[2019-05-09 18:54:29] bin4ry : we are working on a nfz patch v2 to tackle some problems of the first version. anyway a nfz upgrade via app (popup) does NOT interfere with the patch at all. i actually triggers the patch just once again, you can also check your aircraft nfz db version, the problems are NOT coming from the popup „please upgrade your nfz db“, dji can push a non static version without asking you, this seems to be a regional issue which doesn’t occur in all regions and was hard to pinpoint because of that.

[2019-05-09 19:03:02] bin4ry : and regarding the other questions, we are working on a complete set of features we will deliver, which will be released one after the other after some QA per item. so give us some time to make things proper instead of pushing quick and dirty. definitely we are working on module mixing and porting features to vulnerable versions etc etc also rc flashing to another version than the ac along with fcc and boost. this way you will get hopefully all features that dji releases with all hacks :blush: but i won’t get into specifics and i won’t give you any ETA. hope this message makes some of you happy :grin:

[2019-05-09 19:04:14] lolo780 : Would be awesome to be able to flash individual modules. Just leave the core board on 0100.

[2019-05-09 19:05:37] bin4ry : i know i might have a better solution coming up, but no more until i really get it working

[2019-05-09 22:13:12] chipmangini : @bin4ry FTW! :100:

[2019-05-10 04:52:52] rainer.kerncn : @bin4ry makes me very happy to have this outlook :+1: :slightly_smiling_face:

[2019-05-11 09:38:42] are_ari : Can I downgred m2 the version 0200 to 0100 whitout problem stopping at 75%

[2019-05-11 10:12:49] bin4ry : Dikoo how often do you want to ask this? you also already got links to dji forum, most likely your drone is bricked if you haven’t fixed it by now, dji knows of this issue and it is inside their flashing code, they will repair it for free

[2019-05-11 10:19:57] bin4ry : if it happended without flashing (the connection issue on RC), then it is prolly due to your super hacking skills :wink:

[2019-05-11 10:20:01] bin4ry : **SCNR**

[2019-05-11 10:21:52] bin4ry : the 75% stopping is merely a symptom and not the cause, it is the symptom of a faulty 09xx (0901 or 0905) module, which was caused by a bad flash in 99% of the cases known to me

[2019-05-11 10:31:16] bin4ry : you have 2 chances to fix it, which depends on how it happened. chance 1: let the drone sit there during flashing and wait wait wait, if it is something on the filesystem of the 0901 module. then the drone will recover itself. this would be the case if you fucked up the filesystem by tampering with it manually or via software. if something goes bad here, the drone will recover itself. IF the firmware of the module itself is damaged due to bad flashing like the post in the DJI forum OR if you tried to manually mess with it in a worse way, then the drone is bricked. dji will swap you core board then, it doesnt happen a lot but it happened while flashing from 06.0000 or 01.0000 and skipping a firmware. atleast that is how i reproduced it ....

[2019-05-11 10:33:14] bin4ry : hope that info helps you

[2019-05-11 10:38:58] are_ari : I mean I have a new m2 on the version 0200

[2019-05-11 10:41:22] are_ari : Can i downgred version0200 to 0100 without problems 75%

[2019-05-11 10:43:29] bin4ry : i cannot understand you, without problems means that there is no problem

[2019-05-11 10:43:32] bin4ry : so what is your problem then ?

[2019-05-11 10:49:39] bin4ry : if you want to ask if it is safe to downgrade from 0200 to 0100, then the answer is YES. the problem is when you come from 0000 and jump versions. once you are on 0100 or any higher firmware it SHOULD be safe, atleast that is what i found by my testings until my drone bricked, and it bricked only from this low firmware jumping from 06.... to 0100

[2019-05-11 10:56:51] are_ari : I understand you thank you

[2019-05-12 10:04:45] cantrepeat : can we get boeing's mcas system added to NLD :smile:

[2019-05-12 10:04:54] cantrepeat : too soon™

[2019-05-12 12:31:34] bin4ry : who here is in DC nfz?

[2019-05-12 12:32:14] validat0r : hmm, forgot the name. the guy with his spark said he would be selling his a couple of weeks ago

[2019-05-12 12:32:45] validat0r : I think, it was @rainman

[2019-05-12 12:34:22] bin4ry : i need m2 only

[2019-05-12 12:34:44] bin4ry : so who has nld an m2 and lives in the dc nfz

[2019-05-12 12:34:50] bin4ry : :joy:

[2019-05-12 12:35:10] validat0r : one of trump's kids maybe

[2019-05-12 12:57:21] coldflake : @ilovemynexus4 probably not the most truthful test persons? lol

[2019-05-12 12:58:06] validat0r : but hugely motivated if the wants to get his M2 up over the white house

[2019-05-12 12:58:57] rickw001 : if I had m2 I would drive over there for you

[2019-05-12 13:47:49] fredmicrowave : @bin4ry Because you don't need range, with SDR hardware you could also try GPS spoofing to all the suspect locations ...

[2019-05-12 13:49:27] bin4ry : i did

[2019-05-12 13:49:51] bin4ry : it works but i want a reallife test to confirm it 100%

[2019-05-12 13:50:31] bin4ry : fwiw i spoofed myself to the white house and was able to fly :joy:

[2019-05-12 13:50:54] lolo780 : On Airforce 1?

[2019-05-12 13:51:34] fredmicrowave : Awesome

[2019-05-12 13:54:01] bin4ry : airforce 1337

[2019-05-12 14:09:05] cantrepeat : airforce 99

[2019-05-12 16:28:14] flymymavic : @quad808 mate just looking at the instructions for adding the tiles into the app, your example only shows 2 files called xxxxx.hgt.zip yet my JSON file has 3 entries, is it just the first 2 I change, ?

[2019-05-12 17:17:29] quad808 : @flymymavic the number of "tiles" depends on your area...max of 3 you can put in.

[2019-05-12 17:18:23] quad808 : sorry...you can use up to 4 tiles

[2019-05-12 17:21:33] quad808 : For example, this is the file for the Las Vegas area with 4 tiles.

[2019-05-12 17:42:15] flymymavic : @quad808 many thanks mate, I can get on with video number 6 in the NLDZ guide.

[2019-05-12 18:10:18] d95gas : Guys ..... Just thought I had better get the MP1 out and blow the cobwebs off it, been neglected since Anafi came along. So I am still on my original firmware of V01.03.0400, which pretty much gives me everything, incl Altitude removal, NFZ, etc ...... which has been great for me. Looking at the Birdmap, I see there is no Altitude removal after V01.03.0800. Is this correct? or has the Birdmap just not been updated?. Now undecided what to jump to, if anything...... Not that I ever exceed CAA altitude, just dont want DJI to dictate what I can and cannot do.

[2019-05-12 18:11:29] lolo780 : I thought 0900 has height

[2019-05-12 18:11:44] lolo780 : 0700 nfz

[2019-05-12 18:14:34] flymymavic : Bird map is correct as far as i know, ALT parameter doesn’t show up after 800 and height is 0700

[2019-05-12 18:28:57] quad808 : 0700 is the best one...don't go to 0800, DJI messed with Aeroscope from then on

[2019-05-12 18:29:10] quad808 : or use custom FC

[2019-05-12 18:29:15] d95gas : I will need to see what benefits (if any) I would get by upgrading from current setup. I'm not one for all those fancy modes, so not sure there is anything for me to achieve

[2019-05-12 18:30:02] d95gas : Is the team any nearer incorporating the FC patcher into NLD

[2019-05-13 04:08:02] rickysuper : beside the new FCC and boost patch of version 19.1.0, will got the NFZ patch issue fix ?

[2019-05-13 05:01:42] bin4ry : hard coded nfz zones will be included in the next minor release after some more testing. i have it working here but i am still in the testing phase

[2019-05-13 05:01:59] bin4ry : and we didn’t want to delay this release

[2019-05-13 05:03:44] bin4ry : but many fixes regarding problems when applying patches, downloading stuff etc were fixed and adressed here

[2019-05-13 06:53:52] ben_lin : So just curious

[2019-05-13 06:54:16] ben_lin : Is it fixed-FCC AND BOOST for M2?

[2019-05-13 06:54:24] ben_lin : Or just fcc

[2019-05-13 06:54:29] ben_lin : @bin4ry

[2019-05-13 06:57:48] rickysuper : Bird side FCC, boost not ready yet

[2019-05-13 06:58:15] ben_lin : so its coming？

[2019-05-13 08:07:01] nopcode : @bin4ry great news!

[2019-05-13 08:14:56] cs2000 : Just FCC mode for the M2, but its a start! TA least we can actually mod the M2 finally!

[2019-05-13 08:31:58] nopcode : did you figure out what @lowellfoo780 mentioned about his M2 losing the NFZ patch?

[2019-05-13 08:53:59] rickysuper : My friend tried the NFZ and FCC patch already, all works finally ! Thanks

[2019-05-13 08:54:11] lolo780 : So far 2nd time it's stayed

[2019-05-13 08:55:31] rickysuper : M2 no lock up or auto landing issues.

[2019-05-13 09:28:10] dronepilot : M2 fcc patch only on .100?

[2019-05-13 09:29:56] cs2000 : @rgf8aerial Yes, we recommend V01.0.0100 firmware on the M2, FCC is only for that version

[2019-05-13 09:38:44] dronepilot : Thanks @cs2000 would love to se fcc on V01.0.0200.

[2019-05-13 09:44:22] bin4ry : later, one step after another :wink:

[2019-05-13 09:44:46] bin4ry : but afaik 0100 has all functions needed, except the messed up exif data

[2019-05-13 09:44:57] bin4ry : the other functions are app functions

[2019-05-13 09:45:21] bin4ry : afaik

[2019-05-13 10:05:49] dronepilot : Thanks guys, great job on the M2.

[2019-05-13 11:23:52] nopcode : if those were app features they should be in the app changelog, not the fw changelog :thinking_face:

[2019-05-13 12:38:39] cantrepeat : I really think MCAS would be a great feature!! :smile:

[2019-05-13 13:27:55] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.9.1.0

[2019-05-13 13:28:34] cs2000 : @are_ari have you submitted a support ticket? I have one like that in the queue, im waiting for some info to know what failed from one of the devs :slightly_smiling_face:

[2019-05-13 15:30:51] bin4ry : dji ALWAYS puts them in the fw changelog, there were like 10features before which were app features only and they wrote it to the fw changelog. they usually do this if they want you update the firmware for some reason

[2019-05-13 15:34:34] dronepilot : Hi guys just did the downgrade back to .100 and applied the nfz and fcc patch. Question do I keep .100 or 200 firmware on the battery? Thanks

[2019-05-13 15:37:58] lolo780 : Keep 0200, no need to change it.

[2019-05-13 15:54:31] dronepilot : @lowellfoo780 obrigado thanks.

[2019-05-13 18:50:38] bin4ry : maybe i don’t know this place, feel free to contact me private :wink:

[2019-05-13 18:57:55] flymymavic : @quad808 thanks for the file, all went smoothly, just need to test fly, I take it (silly question) that this will alter the AGL as the ground rises and falls giving a more accurate reading as opposed to just how high AGL from take off point.

[2019-05-13 19:07:41] hotelzululima : this place @bin4ry <https://www.youtube.com/watch?v=YeFzeNAHEhU>

[2019-05-13 19:08:10] hotelzululima : the most propaganda sensitive spot in .cn

[2019-05-13 19:09:51] hotelzululima : <https://www.google.com/maps/d/embed?mid=1mwGpP-HUO5wLLvfeaXId47CKTWg&msa=0&hl=en&ie=UTF8&t=h&ll=39.91562800000003%2C116.39079100000004&spn=0.0158%2C0.027466&z=15&output=embed>

[2019-05-13 19:12:35] hotelzululima : i suspect if drone will activate when it thinks its sitting there that you have successfully bypassed ALL NFZ issues in the current release ymmv & this USED to be the most sensitive spot in .cn post 1989

[2019-05-13 19:13:39] hotelzululima : of the publicly known “sensitive” areas..

[2019-05-13 19:39:52] flymymavic : Just had a fail to downgrade from 0500 to 0700, it hung at 82%, fortunately I was still able to connect via remote, the dji asst showed FW as 0500-, I’ve done this before so why did it fail this time

[2019-05-13 20:49:01] flymymavic : Tried it twice still the same issue, even took the FW down to 0100 using asst, just won’t flash past this, worse still it kills the NLDZ app and I have to download and update a new copy ?

[2019-05-13 21:08:16] dronepilot : I’m using DMLD V3.15 beta to downgrade/upgrade the M2 no issue so far.

[2019-05-13 21:27:00] coldflake : Nld and dd does it the same way for M2

[2019-05-13 21:27:14] coldflake : And for the other birds as well

[2019-05-13 21:28:04] coldflake : That looks pretty strange with the grey panel in the screenshot, it should have been white

[2019-05-13 22:37:34] quad808 : Yes, so for example you take off on level ground, then fly over a canyon. The height will change to what actual height is...taken from the "tiles". I have not tested this myself, but have been told it works great!

[2019-05-13 23:31:12] coldflake : ...and it has been fixed in the next release :)

[2019-05-14 00:35:13] mrbracht : Little nervous since I haven't attempted nld with my m2p since the incident I had with my m2z bricking at 75 percent. I want to flash the nfz patch and I'm on 0100. In theory it shouldn't brick, correct?

[2019-05-14 00:38:07] mrbracht : Also, I am aware the nld isn't the cause of the brick.

[2019-05-14 00:38:17] mrbracht : Just nervous is all. Lol

[2019-05-14 02:31:18] dnacho : This would be regardless of the nfz database version downloaded?

[2019-05-14 02:56:39] lolo780 : If you're on 0100 you're good to apply the NFZ patch

[2019-05-14 03:03:35] reaktor : I purchased the new NLD. Downgrading firmware from .0200 to .0100. Seems to be stuck at 39%. Waiting, waiting. Should I just let it sit or restart with a new battery if nothing changes. Wm250_0801_v10.00.07.30 seems to be stuck

[2019-05-14 03:16:14] reaktor : M2 btw. One of the first to be sold. Never an issue before today.

[2019-05-14 04:05:36] reaktor : Trying a different PC, now i can get to 92% uploading firmware before NDL app freezes. Luckily i can get back to .0200 using DJI Assistant 2.

[2019-05-14 04:14:24] bin4ry : how long did you wait on 92? for me it takes approx 5 minutes from there to finish

[2019-05-14 04:28:11] reaktor : Its at 93% now on another attempt. Hopefully it can make it. Seems like my other laptop is completely incompatible however, even though it was always happy with Mavic 1 and older NLD

[2019-05-14 04:50:45] quad808 : If it appears stuck after 10 minutes, restart it. NLD will reconnect and try to continue the flash.

[2019-05-14 05:03:46] reaktor : Still stuck after 30 mins. Restarted drone but not seen by NLD. It just says "Waiting for reconnect"

[2019-05-14 05:08:27] reaktor : Restarted PC. NLD sees drone as still being .0200

[2019-05-14 05:08:34] bin4ry : interesting, win 10 64 bit or older?

[2019-05-14 05:08:56] bin4ry : sounds like a pc or usb problem to me

[2019-05-14 05:09:12] bin4ry : this is the phase were tje drone makes the final reboot to flash the last modules

[2019-05-14 05:09:24] bin4ry : your pc needs to redetect the drone after the reboot

[2019-05-14 05:09:49] bin4ry : any firewalls or antivirus which might intercept anything running?

[2019-05-14 05:22:28] reaktor : Cant get it to work. Sometimes NLD just crashes and si

[2019-05-14 05:22:51] reaktor : and disappears off the screen.

[2019-05-14 05:23:37] reaktor : Assistant 2 works perfectly to restore back to 0.200.

[2019-05-14 05:25:45] reaktor : Im using Win 10 64 bit on both machines. Standard windows firewall and disabled virus scanner. NLD makes it a different length through the process each time. The older NLD with my Mavic 1 had no such issues

[2019-05-14 05:30:48] d95gas : Have you run NLD in admin mode?

[2019-05-14 05:42:43] reaktor : Yes, tried admin & compatability modes. Thankfully Assistant 2 just fixed my mismatched firwares again.

[2019-05-14 05:43:39] reaktor : Im just wondering if there is a different eprom or something inside as I purchased this in the first week of sale.

[2019-05-14 05:44:27] reaktor : Ill try one last go with firewall and virus scanners disabled and admin mode

[2019-05-14 05:59:51] reaktor : With Firewall disabled & Virus scanner disabled "FLASHING PASSED WITH FLYING COLORS" 0.100

[2019-05-14 06:00:36] reaktor : FCC MODE Patching Complete :+1::heart:

[2019-05-14 06:01:12] reaktor : 10th time lucky...

[2019-05-14 06:03:41] reaktor : Thanks to everyone involved. Bin4ry you were right about firewall/antivirus

[2019-05-14 06:07:34] reaktor : For anyone interested it was Windows Defender Firewall and Bitdefender realtime Protection Shield that were causing me grief.

[2019-05-14 06:48:40] coldflake : Awesome @reaktor, very interesting information as well, it seems like there in some cases are something blocking the network access to the patch packets on the server

[2019-05-14 06:50:48] nopcode : @coldflake maybe you should grab all the files you need to flash before you start the flashing

[2019-05-14 06:56:26] reaktor : @coldflake Recently I also had to disable UAC in Windows 64. For a couple of months it been blocking Assistant 2 as unsafe. This could also be affecting NLD. The app DJI Assistant 2\DJIEngine\Viewer.exe has been flagged as a trojan by Bitdefender at the same time. Seems to be some dodgy code in Assistant 2 package.

[2019-05-14 07:11:31] coldflake : @nopcode it already does that, however it doesn't do a md5 check, only byte count check

[2019-05-14 07:11:58] coldflake : Which the next release will do, md5 check everything

[2019-05-14 07:42:06] nopcode : are there dumps of all the M2 firmwares, unencrypted? and is it difficult to open a module in ida pro?

[2019-05-14 09:00:47] flymymavic : @coldflake hi mate, just had a read of Tuts replies, I’m a MP1 owner with Win7 64bit so no defender or firewall blocking access, any ideas how to get this working as the dji asst is now failing to flash it, also once it stops working I can’t get NLD to reconnect unless I power off the quad and get a fresh copy of NLD and let it upgrade then run it again.

[2019-05-14 09:16:30] cantrepeat : Are you running it as Admin?

[2019-05-14 09:45:44] flymymavic : @catalinaskirace yes mate, I’ve flashed before all was fine until the last update, same cable same port etc

[2019-05-14 10:20:49] flymymavic : Layout issue, something I’ve mentioned before, my laptop is set to 1920 x 1080 and I get this in the FCC section

[2019-05-14 10:34:38] coldflake : Ahh yes I see, I am not sure exactly what causes it but it is not a problem in later windows versions. Are you using windows 7?

[2019-05-14 10:37:04] cantrepeat : yeah he's on Win7 64bit

[2019-05-14 10:38:10] flymymavic : @coldflake yeah it’s a laptop, will get my 1024 monitor out and see if it’s the same on that

[2019-05-14 10:40:30] coldflake : @flymymavic It is windows screen scaling that is causing the issue, not the actual display. In windows 7 screen scaling were still very new and lacked a lot of stuff

[2019-05-14 10:48:40] flymymavic : @coldflake so I tried reflashing from 0100 to 0700, as expected it hung at 82% I powered off the quad (hate doing that) and restarted NLD and I get this, thinking something ain’t right here ?

[2019-05-14 11:39:28] hans112 : Put the desktop back on 100% instead of 150% ..... Should fix it.

[2019-05-14 14:10:15] flymymavic : Dam it’s now refusing to connect and the laptop is going mad finding and losing the comport , oh shoooot. Anyway out of this ?

[2019-05-14 15:16:10] coldflake : @flymymavic Just turn it on and let it sit for a while until it fires up its internal fan

[2019-05-14 15:16:31] coldflake : Then it will also be able to connect the USB again

[2019-05-14 15:26:43] flymymavic : @coldflake will give it a try thanks mate

[2019-05-14 16:21:45] flymymavic : @coldflake mate you are a genius ( in case you weren’t aware lol) that got it working, but I’m a little hesitant to touch NLD in case it goes again

[2019-05-14 16:22:47] coldflake : Awesome

[2019-05-14 16:22:55] coldflake : Don't worry, it will not happen again

[2019-05-14 16:23:56] coldflake : And if it does, you know how to fix it ;)

[2019-05-14 16:24:29] flymymavic : Did you see my earlier posts with pictures ?

[2019-05-14 18:41:39] coldflake : Yes with the grey areas

[2019-05-14 18:41:44] coldflake : I have fixed that

[2019-05-14 18:41:53] coldflake : In the coming release

[2019-05-14 18:42:27] coldflake : But in general we can only recommend to upgrade to anything newer than windows 7

[2019-05-14 19:36:53] 007 : :+1: :heart:

[2019-05-14 19:55:49] lolo780 : Everything has been working perfect on win10

[2019-05-14 20:33:28] flymymavic : @coldflake not the grey areas mate, why it’s hanging and crashing at 82% every time I’ve tried it, is there a wait time, or should it move on quickly. As I said I’ve used it before and did a video on it for the NLDZ video guide that’s on my YouTube channel and it worked great but since the update it doesn’t work.

[2019-05-14 21:15:30] quad808 : Is it the same module every time it gets stuck on?

[2019-05-15 03:44:10] dronepilot : Spark have fcc and nfz patch like the M2?

[2019-05-15 04:27:58] rickysuper : My friends bought separate 2 licenses but no email reply, no key. Who can I contact with to sort ?

[2019-05-15 05:25:17] bin4ry : @coldflake ^—

[2019-05-15 05:26:11] rickysuper : @bin4ry I will make a ticket to the support. Thannks

[2019-05-15 05:26:58] bin4ry : usually happens if you just close the site but no problem key will be send manually then

[2019-05-15 05:27:55] flymymavic : @quad808 yeah mate, as per the picture, I let it sit for 20 minutes with no change

[2019-05-15 08:13:43] nopcode : @coldflake why the hate on windows 7?

[2019-05-15 08:13:51] nopcode : what features do you need that win7 does not have?

[2019-05-15 08:14:27] coldflake : no hate but you cant bridge old windows 7 with the newer operating systems without a load of problems

[2019-05-15 08:14:50] coldflake : when strange stuff doesn't work, ppl ususaly use windows 7 or even XP

[2019-05-15 08:15:10] coldflake : you can not expect developers to directly support windows 7 anymore

[2019-05-15 08:15:21] coldflake : we have always done our best to bridge the gap

[2019-05-15 08:15:28] coldflake : but it is a shit show in a dumpster fire

[2019-05-15 08:16:05] coldflake : why should we do double code work just because people use old outdated shit OSes?

[2019-05-15 08:16:14] coldflake : there is a reason that MS doesnt support it anymore

[2019-05-15 08:17:20] coldflake : In reality you are barking up the wrong tree because at the end of the day it is Microsofts decission :wink:

[2019-05-15 08:18:00] coldflake : Even MS doesn't do any backwards compatibility for windows 7 anymore

[2019-05-15 08:18:29] coldflake : if it works, cool, if not, too bad is Microsofts policy on the matter

[2019-05-15 08:19:10] coldflake : Regarding features lacking in Win7 compared to Win10 or even Win8.1 are staggeringly long

[2019-05-15 08:19:56] coldflake : but that is beside the point, the point is that the windows core is not supported anymore and that causes us to do double code work in many cases, otherwise it will fuck up for everyone NOT running Win7

[2019-05-15 08:20:34] coldflake : So no hate, but no love either lol

[2019-05-15 08:27:40] bjoneseying : Windows 7 is still supported until Jan 14 2020

[2019-05-15 08:28:29] coldflake : ok yeah true, it was XP that were totally expired

[2019-05-15 08:28:49] coldflake : nevertheless it doesn't change much of the above though

[2019-05-15 08:29:08] bjoneseying : 8.1 is eol in 2023

[2019-05-15 08:29:26] bjoneseying : Win10 1709 April 2020

[2019-05-15 08:29:49] bjoneseying : That's for enterprise mind you

[2019-05-15 08:29:58] coldflake : it is only win 7 that is causing problems due to some fundamental changes that MS did between Win7 and WIn 8

[2019-05-15 08:30:52] coldflake : But we do support Win7 the best we can, even though its a pain in the a$$

[2019-05-15 08:31:49] bjoneseying : People still use it

[2019-05-15 08:32:07] bjoneseying : Everyone hates the metro interface

[2019-05-15 10:52:36] flymymavic : Who’s the best to ask about the tiles you can download for the maps, just got a quick question ?

[2019-05-15 10:52:53] nopcode : what's windows core? if you just use the win32 api you should be set for decades, MS will always support that

[2019-05-15 10:53:46] nopcode : i just have windows 7 on my desktop at home because i couldnt care less as long as lightroom and steam works

[2019-05-15 10:58:30] nopcode : i'd probably use PyQt for a desktop app that doesnt do any heavy number crunching

[2019-05-15 10:58:47] nopcode : both python and qt should abstract away most OS differences

[2019-05-15 11:20:26] coldflake : @nopcode In general NLD IS using win32 but it is still not exactly the same

[2019-05-15 11:20:43] coldflake : lots of stuff that Win7 uses are obsolete now

[2019-05-15 11:21:03] coldflake : meaning those api calls doesnt ring bells on newer OSes

[2019-05-15 11:21:13] coldflake : thats why you need to do double code

[2019-05-15 11:21:55] coldflake : if you couldnt care less, why dont you just upgrade, and I can promise you that stream will perform a lot better :slightly_smiling_face:

[2019-05-15 11:24:29] cantrepeat : @coldflake does the current version of NLD do anything to block drone ID from areoscope and the like?

[2019-05-15 11:35:08] rickysuper : My friends still not get the keys...

[2019-05-15 12:01:33] nopcode : @coldflake a windows 10 license costs money and i wanted to wait with that till i upgrade my hardware

[2019-05-15 12:04:37] nopcode : @coldflake you dont do any hardware ID / windows OS binding in NLD right? it's just bound to the bird?

[2019-05-15 12:04:57] nopcode : so i could get a random win10 vm image, install NLD and later install it on another system?

[2019-05-15 12:10:26] coldflake : @nopcode yes no other binding than the bird

[2019-05-15 12:13:51] nopcode : great. tbh adobe has also been nagging me to upgrade (lightroom doesnt get updates anymore for win7...)

[2019-05-15 12:14:05] nopcode : should probably get a m.2 ssd and install a fresh win10

[2019-05-15 13:44:08] reaktor : @nopcode use your Win7 licence key for Win10. It still works. I did it a few weeks ago.

[2019-05-15 13:48:20] nopcode : tut: my win7 seems to not be legal

[2019-05-15 13:48:43] nopcode : i bought it on amazon, installed it, couple weeks later it starts calling me a criminal

[2019-05-15 13:49:06] nopcode : never cared (since i paid for it) but i doubt i should try to update with that

[2019-05-15 13:50:14] reaktor : lol

[2019-05-15 14:59:12] flymymavic : @quad808 mate about the tiles, done all the file bit ( cheers again for the sample) but do you need to copy the actual zip files into the app ? I had a test flight today and it made no difference. Am I missing something? I tried with and without an internet connection in case it had to read them from somewhere

[2019-05-15 15:16:54] cantrepeat : Does NLD block aeroscope from getting the Drones ID ??

[2019-05-15 20:04:05] quad808 : @flymymavic yes, you need to copy over the .zip files into srtm_data folder. If you have different flying areas, just drop all of the .zip files in there...that way you only need to change the dtm.settings.json file for the new area.

[2019-05-15 20:16:03] quad808 : If you don't have any tiles loaded you will see QFE instead of DTM.

[2019-05-15 20:20:30] flymymavic : @quad808 yeah thought so, you might want to change the guide mate as that isn’t part of your instructions,

[2019-05-15 20:20:34] flymymavic : Cheers

[2019-05-15 20:41:21] bin4ry : not yet, soon

[2019-05-15 21:54:47] reaktor : Hate to say it but i went back to .0300 for the m2. Just too many bugs and missed features in .0100. I can always drop back if required. Surprisingly FCC mod made almost no difference on my range, although i didn't try manual frequencies.

[2019-05-15 21:55:45] reaktor : Looking forward to a possible .0300 release to bring things up to date.

[2019-05-15 21:57:17] reaktor : Apart from that the flight went smooth (except for crappy DJI bugs in .0100)

[2019-05-15 22:02:08] quad808 : @rickysuper did your friends get their keys??

[2019-05-15 22:02:30] quad808 : we have had email hosting problems

[2019-05-15 22:11:43] wouter : Am thinking about rolling back to 0100 but getting apprehensive. What features are you missing? And are you flying outside of the US so that FCC lock makes sense?

[2019-05-15 22:13:10] wouter : any chance NLD will go beyond .0200 release?

[2019-05-15 22:14:11] wouter : latest is .0400 - did something get introduced in .0300 release that prevents root access?

[2019-05-15 22:16:15] flymymavic : Just noticed that the factory reset option is missing, hitting reset values doesn’t reset the parameters or does it ?

[2019-05-15 22:29:44] quad808 : reset values, resets the page to defaults...then you can apply.

[2019-05-15 23:28:55] dronepilot : Backed up to .200 on the M2, got some strange message system error navigation and altitude bad behavior. Didn’t notice any difference on nld fcc. Sorry guys will wait for something better that’s not on .100 firmware.

[2019-05-16 05:18:08] bin4ry : that has nothing to do with 0100. but do as you wish

[2019-05-16 05:20:13] bin4ry : did you really try if there is a feature missing? i am really interested if you tried the waypoints on 0100. the only feature which is missing on 0100 is dual controller and that can be solved by flashing the controller to 0400.

[2019-05-16 09:45:39] flymymavic : @quad808 in the last version I found that simply hitting reset values and applying did not remove the sport plus mode parameters, it merely moved the sliders, have you changed that now ?

[2019-05-16 10:06:25] dronepilot : Thanks bin4ry will wait for .200 or newer version.

[2019-05-16 10:08:13] rickysuper : FCC patch works but agree .100 was not good. It's firmware issue not NLD

[2019-05-16 10:09:57] rickysuper : @quad808 yes they got the keys one hour before. Thanks

[2019-05-16 12:16:33] dronepilot : Totally firmware issue.

[2019-05-16 12:22:27] benhardings3 : @quad808 @flymymavic can confirm this on my end, on my test spark pressing reset values does not seem to move the sliders (i had previously enabled sport+ etc on another version) and then applying doesn't seem to do anything as if i disconnect and let it read values from the bird again it reads the same values as before (with sport+ enabled) and i can't seem to reset it back to defaults. either that or i'm being a dumbass. happy to admit that. haha.

[2019-05-16 12:35:27] flymymavic : @benhardings3 @quad808 can you confirm quad please

[2019-05-16 12:46:34] geeteshdubey : Hi, were you able to solve this. I’m facing similar issue :grimacing:

[2019-05-16 15:15:44] geeteshdubey : Is NLD working for mavic 2 enterprise? Mine shows error about cant read boardSN

[2019-05-16 17:06:08] quad808 : Enterprise is not supported.

[2019-05-16 17:25:39] cantrepeat : However, millennium falcon is!!

[2019-05-16 17:25:56] cantrepeat : Star Wars > Star Trek!!

[2019-05-16 17:35:39] lolo780 : You will be assimilated

[2019-05-16 17:58:48] cantrepeat : Well if it's by 7of9 ok then!

[2019-05-16 18:05:28] quad808 : Make it SO! Dammit Jim!

[2019-05-16 21:20:35] flymymavic : @coldflake @quad808 right can confirm the following, open flight controller, move slider ( i used sport Acc Climb) change to 10, apply mods , values written to device, click reset values, confirm reset all sliders to initial position, slider for above does not revert back to original position. Only way to reset to defaults is either manually change each slider or use asst to factory reset. Can you put factory reset back in the bottom tabs, otherwise I gotta redo my guide video all over again

[2019-05-16 21:21:52] quad808 : Thanks for that. I have asked @coldflake to take a look and put that back if possible. Appreciate the info!!!

[2019-05-16 21:22:22] coldflake : Yea I will have a look at it and see if I can bring it back fairly easily

[2019-05-16 21:30:19] flymymavic : Thanks as always lads

[2019-05-17 06:10:14] rickysuper : I am using .000 firmware version (M2P) now. What is the most safe method upgrade to .100 to prevent brick the bird ? Thanks

[2019-05-17 10:09:23] dronepilot : Hi nld guys, any thoughts if .200 firmware will we have fcc by this month? Thanks

[2019-05-17 12:16:40] cantrepeat : Soon™ ® ©

[2019-05-17 12:44:05] dronepilot : Thanks

[2019-05-17 13:17:13] cantrepeat : <------------ I do NOT have any information as to what is or is not coming from NLD. The soon TM is just joking post.

[2019-05-17 13:18:09] cs2000 : its a pretty safe bet though :wink:

[2019-05-17 13:19:19] cs2000 : AT NLD towers, we have this clock on the wall to make sure we **never** miss deadlines

[2019-05-17 13:50:59] nopcode : are the firmware modules just unencrypted binaries in the filesystem of the bird? and does NLD just replace / patch them?

[2019-05-17 13:51:09] nopcode : just wondering

[2019-05-17 13:51:32] nopcode : like, getting a "dump" of a new firmware is just logging in as root (using the exploit) and grabbing the files?

[2019-05-17 15:10:39] rickysuper : .000 up to .100 and patching using NLD is safe? No brick issue?

[2019-05-17 16:18:36] lolo780 : As safe as not using NLD

[2019-05-17 20:57:57] flymymavic : @quad808 tested the tiles out today, cant believe how accurate it makes flight, seeing apparently flat land drop by 20 feet is wierd

[2019-05-17 23:04:36] quad808 : Awesome! All credit goes to @mathieu.peyrega for incorporating that feature!

[2019-05-18 01:02:36] andrwho25 : what feature is that?

[2019-05-18 02:01:00] quad808 :

[2019-05-18 13:21:17] cantrepeat : no, it's right there

[2019-05-18 13:21:18] cantrepeat : * Install NLD GO 4.1.22.You will need to copy these "tiles" to a your device in the DJI\srtm_data folder

[2019-05-18 15:13:37] flymymavic : @catalinaskirace pretty sure that wasn’t there before, oh well it’s there now

[2019-05-18 15:18:08] flymymavic : Ahh no right the instructions on the web guide just say copy to your device, knew I wasn’t going crazy.

[2019-05-18 16:11:40] cantrepeat : Actually, t he website has the exact same text on it.

[2019-05-18 16:12:26] cantrepeat : 1. Go to <https://urs.earthdata.nasa.gov/> and sign up for an account 2. Go to <http://dwtkns.com/srtm30m/> and download up to 4 "tiles" for your flying area and save them to your device you use with GO 3. Install NLD GO 4.1.22. You will need to copy these "tiles" to a your device in the DJI\srtm_data folder. Leave them zipped, so they would look like N21W172.SRTMGL1.hgt.zip and so on.

[2019-05-18 16:23:50] d95gas : Whats going on with the NLD Forum ..... Despite being on the English site, everything in the forums is now Chinese ....... Is this the new challenge from the NLD team :slightly_smiling_face:

[2019-05-18 16:25:21] cantrepeat : dunno, sometimes mine comes up in dutch and other shit

[2019-05-18 16:26:24] d95gas : very odd

[2019-05-18 16:26:44] quad808 : !DJI spy bots

[2019-05-18 16:32:17] cantrepeat : I wish I could read and speak other languages.

[2019-05-18 16:32:47] cantrepeat : Knowing how to order a beer in 7 languages only gets you so far in the world.

[2019-05-18 16:36:28] 007 : :rolling_on_the_floor_laughing:

[2019-05-18 16:49:11] d95gas : would be ironic if DJI had hacked NLD :slightly_smiling_face:

[2019-05-18 16:50:14] d95gas : whoever "koo" is, they are bloody busy on the forum, must be Chinese version of War and Peace

[2019-05-18 17:08:25] coldflake : @d95gas yep, insane loads of Chinese spam, annoying shit to say the least..but it will be dealt with

[2019-05-18 17:25:38] d95gas : Its just the way these days..... they obviously have time to kill :slightly_smiling_face:

[2019-05-18 17:30:52] coldflake : Obviously too much time lol

[2019-05-18 17:31:39] coldflake : We also have a very special drawer system here at NLD

[2019-05-18 17:31:47] coldflake : It's a little old fashioned but it works

[2019-05-18 17:32:03] d95gas : maybe they should spend more time perfecting their coding skills... or even better study world maps and produce correct NFZ's

[2019-05-18 17:33:11] d95gas : Think we call the old fashioned drawer .... "File 13" :slightly_smiling_face:

[2019-05-18 17:34:04] coldflake : One drawer is marked with URGENT, another one EXTREMELY URGENT and finally NOT URGENT ANY MORE

[2019-05-18 17:34:44] coldflake : Funny how stuff tends to stack up in the last one lol

[2019-05-18 17:34:57] d95gas : :slightly_smiling_face: odd that

[2019-05-18 17:35:21] coldflake : Obviously joking but you know lol

[2019-05-18 17:35:48] d95gas : Yep I get the picture :wink:

[2019-05-18 19:06:53] flymymavic : @catalinaskirace I think someone must have edited it, the Asterisked parts at the bottom werent there when i did the video,

[2019-05-18 19:08:20] flymymavic : It was a google link I clicked gave me the Chinese bird map

[2019-05-18 19:58:02] quad808 : @flymymavic did you post any videos? I would like to take a look, and it was probably me who edited the tile posting. :slightly_smiling_face:

[2019-05-18 19:59:12] quad808 : nm, found them...will take a look!

[2019-05-18 20:00:56] quad808 : @flymymavic Excellent!! I didn't know that was you!

[2019-05-18 20:02:30] quad808 : Can I link to your videos in our documentation??

[2019-05-18 20:04:33] flymymavic : @quad808 only if you promise to sub to the channel lol, here is the playlist link, I just need to redo the initial introduction to NLD as it was done when the asst software was needed. <https://m.youtube.com/playlist?list=PL5hW7b8MzH7ptRjVxOdMGTnLW1qWGwSQg>

[2019-05-18 20:05:02] quad808 : yes, absolutely!

[2019-05-18 20:05:49] flymymavic : I wish I had a MP2 to do videos on but the wife won’t let me buy one

[2019-05-18 20:06:54] quad808 : subbed. I will link your playlist into our NLD how to docs. I have not had the time to do videos, and lots and LOTS of customers really need them. (hand holding) Well done so far. Love it!

[2019-05-18 20:07:34] flymymavic : Cheers mate

[2019-05-19 04:01:26] coldflake : @flymymavic Awesome!

[2019-05-19 10:54:07] cantrepeat : Can we dub in digdat0's voice? :smile: :smile:

[2019-05-19 12:19:59] coldflake : Chinese trolls trolling the forum, I have a special gift for them! He he....

[2019-05-19 12:47:32] bin4ry : m2 fcc for firmware versions 0100,0200,0300 and 0400 coming soon :sunglasses:

[2019-05-19 15:18:11] ben_lin : what about nfz mate

[2019-05-19 15:33:21] bin4ry : @ben_lin: posted infos about nfz yesterday or the day before. we are currently into beta testing nfz v2 patch which will unlock the hardcoded and the dynamically pushed (background action via app) nfzs. some users will get the beta very soon and if all is fine for them it will be rolled out globally

[2019-05-19 15:34:12] ben_lin : Nice. Good to hear it is happening

[2019-05-19 15:34:33] ben_lin : I have a M2 and lives in a US NFZ so if u need testing just tell me

[2019-05-19 15:55:14] bin4ry : sounds awesome. nfz patches will come for 0100 for now. working on support for higher firmwares currently, or a port of the features, not decided yet. exploit burn problem :wink: but sure will ask you to test via nld beta if you live in a zone which nld seems not to unlock currently, is that the case?

[2019-05-19 16:01:14] ben_lin : Yep

[2019-05-19 16:01:21] ben_lin : Cuz I am running on higher fw

[2019-05-19 16:02:04] ben_lin : Which does not support nfz unlock and I am literally right next to the airport

[2019-05-19 16:02:13] ben_lin : Couldn’t even take off indoors

[2019-05-19 16:07:30] bin4ry : nfz unlock will still only be on 0100 for now. can our current unlock on 0100 unlock your nfz? there seems to be some zones (DC area) which are problematic. so did you downgrade and test? also can you tell me which exact feature you are missing on 0100?

[2019-05-19 18:05:03] quad808 : NLD Forums have been taken offline for now, while we clean out the Russian Women and Chinese bot posts !DJI

[2019-05-19 18:29:21] cantrepeat : damn it Quad, how am I ever going to get married to Hot Russian Woman if you keep deleting the post!!

[2019-05-19 19:37:07] are_ari : Why when removing nfz for version 0100 using nld, the connection between rc and ac stops? Please help.

[2019-05-19 19:41:17] quad808 : reflash 01.00.0100 and try again

[2019-05-19 19:43:12] are_ari : Reflash whit nld or domldor

[2019-05-19 20:00:00] are_ari : The same problem did not fix why this happened where the reason

[2019-05-19 21:11:02] quad808 : No idea what you did before you got on here. Did it flash 100%? Did you try and re-pair the RC? You can also upgrade it to more recent firmware and see if you can pair the RC now, then go back to 01.00.0100 and try again.

[2019-05-19 23:21:15] are_ari : I rty

[2019-05-20 00:31:05] ben_lin : @bin4ry i have to test this nfz tomorrow and get back to you. It is a regular airport nfz though. In terms of features, waypoints library and side obstacle avoidance during smart modes are not available in 0100

[2019-05-20 00:31:49] ben_lin : I will add in things missing tomorrow after the test

[2019-05-20 04:01:49] bin4ry : ok, can you do me a favor and test what features REALLY are not available in firmware 0100. i have a feeling that dome of this are app features, even if dji claims otherwise. i have no time to fly the drone currently :joy:it only sits on the bench

[2019-05-20 06:07:36] reaktor : @bin4ry Main features missing for me are more features in Hyperlapse, missing sideways sensors in Hyperlapse, Globe Panoramas work better in .0300. And for some reason I didn't get much extra range with FCC mod. Went from 3 to 4km max. Looking forward to your .0300 release :grin:

[2019-05-20 08:12:36] nopcode : lin: also precision landing, i think

[2019-05-20 08:45:27] are_ari : I have tried a lot of flashing M2 to issue 0400 and the program has succeeded but the same problem did not connect with rc still the rc la mp is red

[2019-05-20 08:46:09] cs2000 : @are_ari the app actually got to 100% right? Didnt get stuck at 75%?

[2019-05-20 08:49:19] are_ari : Yes, I have 100% success with me, but when I do the program the second time I lose stops at 75%

[2019-05-20 09:01:07] cs2000 : Sorry im confused, when do you get the 100%?

[2019-05-20 09:01:33] cs2000 : If it stops at 75%, thats a DJI flashing bug that causes the symptoms you've seen (cant pair the drone back to the RC)

[2019-05-20 09:11:15] are_ari : @cs2000 Why when removing nfz for version 0100 using nld, the connection between rc and ac stops

[2019-05-20 09:58:20] bin4ry : @are_ari it didn’t. how often do you want to port this? we were over it 4 times already. it had nothing to do with the nfz patch, it happens on 0000 flashing to 0100. it is possible that you noticed it AFTER updating and AFTER you applied the per h, but it was broken after your update from 0000 to 0100. CP module didn’t flash and that’s it. but whet you say doesn’t make sense, in the moment the CP module is dead you will never get 100% flash without restoring your rc connection. so either your get 100 and the rc is up again or you are stuck on 75 forever. if so send it back to dji, they know the issue and replace it for free as it is an issue in their firmware flashing code! by the 4 weeks we discuss this every week again you would have a new proper drone already

[2019-05-20 09:59:31] bin4ry : thx for the info. did you really confirm hyperlapse is missing on 0100? i need a feature i can pinpoint it to to test :joy:

[2019-05-20 10:00:22] bin4ry : since assumptions don’t help me at all. so if you only think it, then it doesn’t help:joy:

[2019-05-20 15:19:29] fredmicrowave : Fwiw I had the M2P (version below .100) and instaled a zoom camera in it. It was not working properly (AE going up and down all the time) until I ugraded to .300

[2019-05-20 15:20:56] fredmicrowave : (Still working fine after downgrading to .100)

[2019-05-20 16:37:38] quad808 : but...but...but....thats not fair! I want to complain some more! Just fix it! (sorry pal, shit happens. Talk to DJI support)

[2019-05-20 23:01:11] ben_lin : Tested today, 0100NLDed M2 flying in US nfz no problem

[2019-05-20 23:03:20] ben_lin : But following features missing: Task Library Precision Landing Lateral vision system during smart modes Hyperlapse Max shutter speed 2s Waypoints

[2019-05-20 23:03:34] ben_lin : And some app UI features

[2019-05-20 23:03:45] ben_lin : @bin4ry

[2019-05-21 03:24:08] bin4ry : thank you for testing!

[2019-05-21 04:15:11] flyingkite : Came across this How to NLD on Mavic 2 <https://www.youtube.com/watch?v=Umh1FJq93kM>

[2019-05-21 04:39:44] reaktor : Hyperlapse extra features, times, & settings were added in later firmware. Also the side sensors were added for Hyperlapse when flying sideways (as most hypelapses are done). Check the firmware release notes

[2019-05-21 04:40:48] reaktor : That last feature saved me from hitting a tree during a circle hypelapse

[2019-05-21 04:43:06] reaktor : You say FCC is coming for later firmwares, so I can wait.

[2019-05-21 08:23:51] nopcode : isn't it documented on the homepage?

[2019-05-21 16:11:08] cantrepeat : @nopcode every time you post all I can think about is 90 90 :smile:

[2019-05-22 06:56:10] nopcode : @catalinaskirace yeah :smile:

[2019-05-22 06:56:26] nopcode : been into x86 reverse engineering in my ehr... youth

[2019-05-22 17:18:49] flymymavic : @catalinaskirace as long as you don’t include that bloody awful music he uses lol

[2019-05-22 20:11:16] quad808 : @flyingkite Thanks for the video links...I have contacted the maker to see if he can do another video with his other DJI craft.

[2019-05-22 21:06:07] flymymavic : @coldflake is RC flashing for the MP1 supported yet mate ?

[2019-05-22 21:06:47] coldflake : It has always been supported mate but I had to disable it due to some issues with the wm names

[2019-05-22 21:07:11] coldflake : I figured it out and it all reappear in the next major update

[2019-05-22 21:21:45] flymymavic : @coldflake yeah i knew you disabled it, wasnt sure if it was reenabled yet, just looking at the FAQ , let me know when its due so i can get a video guide sorted out please Do you also provide firmware for controllers Yes, check the Firmware manager in our NLD Client

[2019-05-22 21:30:11] coldflake : Yep

[2019-05-22 21:30:26] coldflake : I will do that and absolutely awesomeness with the videos

[2019-05-22 21:48:35] flymymavic : Thanks, hopefully i got all the right info in them, I need to sort out win10 and get that going, im just old school with OS's but I know W10 is the way to go now and like it or not i have to upgrade

[2019-05-22 22:13:07] cantrepeat : @coldflake @quad808@cs2000 any update on the forums?

[2019-05-22 22:19:40] lolo780 : Still looking for a Russian bride

[2019-05-22 22:21:22] coldflake : Yes

[2019-05-22 22:21:48] coldflake : It is a freak show because the captcha from Google that we are using has been hacked

[2019-05-22 22:22:06] coldflake : So we need to upgrade to v3

[2019-05-22 22:22:12] chipmangini : @lowellfoo780 Russian brides are your friend...

[2019-05-22 22:22:17] lolo780 : Damn hackers

[2019-05-22 22:22:20] coldflake : To prevent the spam bots

[2019-05-22 22:23:09] coldflake : The thing is that I am in Cyprus now to handle the NLD business re-registration here in Cyprus

[2019-05-22 22:23:35] coldflake : Nld is a registered company in Cyprus and the Marshall Island

[2019-05-22 22:23:54] coldflake : We are preparing to prevent a lawsuit from dji

[2019-05-22 22:24:06] coldflake : Good luck with thst in the Marshall Islands lol

[2019-05-22 22:24:32] chipmangini : Marshall Islands FTW! I have friends there...

[2019-05-22 22:33:40] andrwho25 : by friends you mean bank accounts?

[2019-05-22 23:56:44] cantrepeat : I wonder if I can get a 2 for 1 deal on them?

[2019-05-23 00:00:25] cantrepeat : I bet it's the brides themselves posting the adds. They need me!!

[2019-05-23 13:44:49] rainer.kerncn : @coldflake hope everything goes well with the registration. Take some days more, take your laptop to the beach and enjoy also a bit life

[2019-05-23 14:13:53] coldflake :

[2019-05-23 14:14:52] coldflake : I am already there mate :)

[2019-05-23 14:31:42] bin4ry : if you guys <!here> didn’t notice! new nld update is out, fcc for all stable firmwares is out! up to the very latest 0400

[2019-05-23 14:33:09] rickw001 : still showing .1 for me

[2019-05-23 14:39:46] bin4ry : clientversion?

[2019-05-23 14:40:03] bin4ry : 1.9.2.0?

[2019-05-23 14:40:30] bin4ry :

[2019-05-23 14:43:11] dronepilot :

[2019-05-23 14:43:40] dronepilot : Hurray fcc .200 fw you guys rock. Thanks nld

[2019-05-23 14:55:33] mr.vibez : Sweet, best crack open my wallet

[2019-05-23 15:34:41] rickysuper : FCC for all FW version ! But I'm in .000, afraid of upgrade and brick....

[2019-05-23 15:35:49] lolo780 : Does boost work?

[2019-05-23 15:40:58] d95gas : Awesome work team, one hell of a job. I sincerely hope the fight against DJI goes your way, with the dirty tricks they have used previously with Open Source software, its about time they got taken down. I might have to consider laying out more money on the M2 :slightly_smiling_face: thanks guys, and keep up the battle.

[2019-05-23 17:47:18] quad808 : @rickysuper if you are concerned about brick, use official DJI Assistant to upgrade, then downgrade with NLD. If you upgrade and assistant bricks the M2, you can blame only DJI. I don't think you can downgrade and brick.

[2019-05-23 17:47:54] quad808 : Of course there is always the possibility of a brick using Assistant and DJI's crap firmware flashing code. !DJI

[2019-05-23 18:41:56] coldflake : @rickysuper you can not downgrade to 000 from nld anymore

[2019-05-23 18:42:10] coldflake : it shows the firmware but says unusable and button is disabled

[2019-05-23 18:42:40] coldflake : you can not apply any patches to 000 so no one should get in an unfortunate situation due to the faulty 0000 fw

[2019-05-23 21:21:51] dnacho : @coldflake should I leave it there? it's been 10 minutes

[2019-05-23 21:22:29] coldflake : I would say so

[2019-05-23 21:22:43] coldflake : I had the same experience with M2 yesterday

[2019-05-23 21:23:13] coldflake : It were hanging at 98% for 15 minutes before it decided it were done

[2019-05-23 21:23:17] dnacho : Also this logo shows up as mavic pro. And I didn't knew the firmware manager was only available to paid users

[2019-05-23 21:23:24] dnacho : Ohhhh ok ok thank you

[2019-05-23 21:24:08] coldflake : That looks like a big with regarding the wrong icon

[2019-05-23 21:24:36] coldflake : No wait, I think that we reused M1 as dji haven't made an icon for MA we could rip off lol

[2019-05-23 21:40:20] dnacho : Oh lol

[2019-05-23 21:40:27] dnacho : Yeah it's still stuck @coldflake

[2019-05-23 21:40:51] coldflake : Well then just turn it off and try again with a fresh battery

[2019-05-23 21:41:26] coldflake : It might even be done but the shitty dji code won't allow it to push the final percent even it is done

[2019-05-23 21:41:39] coldflake : Try see what it says after a reboot

[2019-05-23 21:44:26] dnacho : OK I just did that and it shows it's in the same fw 01.00.0620

[2019-05-24 00:13:59] rickysuper : @coldflake I am at version .000 and afraid upgrading the firmware, but as @quad808 said I can use DJI Assistant to upgrade the FW, and bad result I can blame to DJI. Thanks

[2019-05-24 05:46:57] webmaster : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.9.2.0

[2019-05-24 06:23:36] rickysuper : again, my account was locked and I want to buy the NLD now but was locked. Why this was the 4 time my account was locked

[2019-05-24 06:54:24] rickysuper : can login again but don't know why my account always been locked out.

[2019-05-24 07:36:23] rickysuper : successfully fully patch the FCC mode, how can I check the status in NLD ? Because the button was always in Enable mode

[2019-05-24 07:41:34] rickysuper : .000 upgrade to .300 using Assistant 2, then NLD FCC patch without any problems

[2019-05-24 10:03:17] coldflake : @rickysuper When password has been entered wrong 3 times the account gets blocked automatically for an hour I think it is

[2019-05-24 10:03:56] coldflake : @rickysuper You can not tell the status in NLD but you can see the difference in the go app on the sginal page

[2019-05-24 10:04:03] coldflake : RC signal

[2019-05-24 10:04:14] rickysuper : @coldflake ic. Thanks for the remind.

[2019-05-24 13:45:10] dnacho : @coldflake the firmware downgrade does not work with any firmware version on the mavic air It always gets stuck

[2019-05-24 13:45:30] dnacho :

[2019-05-24 13:50:21] coldflake : Aregg! Yes sorry, my mistake, that is the anti rollback on MA 409

[2019-05-24 13:50:24] coldflake : 400

[2019-05-24 13:51:39] coldflake : We haven't cracked it yet but we are going to throw all our love after MA very soon

[2019-05-24 13:52:06] coldflake : The new hacks we are doing will also be ported to the older birds

[2019-05-24 14:01:10] dnacho : So if I'm on any firmware above 400 it won't downgrade?

[2019-05-24 14:42:49] rickysuper : Want to ask, if I patched the FCC in .300 FW, can I directly downgrade to 200 using Assistant 2, and patch FCC again?

[2019-05-24 14:43:39] cs2000 : Patching FCC doesnt stop you from downgrading. If 01.00.0200 is listed in Assistant, you can re-apply the patch once youve downgraded yes

[2019-05-24 14:44:24] rickysuper : Thanks, because I can't remember 300 or 200 included several new NFZ zone in HK. I have to test.

[2019-05-24 15:16:31] rickysuper : According to my friends experience, downgrade firmware cannot remove the updated NFZ database...... :(

[2019-05-24 15:21:04] rickysuper : Can I downgrade the NFZ database using NLD ?

[2019-05-24 15:30:21] buuddy : I'm running V01.04.0300 on a Mavic Pro - I see that Signal Boost is _coming soon_, is there any realistic chance that the altitude removal is coming too?

[2019-05-24 15:34:56] bin4ry : @rickysuper downgrade to 0100 and remove it

[2019-05-24 15:35:47] bin4ry : @buuddy fc patching will come. it is on the internal development timeline to get it into nld. no eta though

[2019-05-24 15:39:10] rickysuper : @bin4ry I will wait for .400 NFZ patch support Hope soon

[2019-05-24 15:40:00] buuddy : @bin4ry thx. Any hopes on altitude removal for MP1 (in 1.04.x firmware)?

[2019-05-24 15:40:00] bin4ry : @rickysuper no eta on that either.

[2019-05-24 15:40:23] buuddy : (not an eta, just looking to know if it's been decided that it's a lost cause)

[2019-05-24 15:40:48] bin4ry : @buuddy that is what i answered:wink:

[2019-05-24 15:42:14] bin4ry : so mavic 1 04.300 firmware fc patching in the future, but not now. :joy: day has only so many hours

[2019-05-24 15:42:48] buuddy : I'm sorry, thought fc was fcc/singal boost/power. Thanks!

[2019-05-24 15:43:41] bin4ry : ah sorry. fc = flight controller

[2019-05-24 15:43:45] bin4ry : my fault :wink:

[2019-05-24 18:07:01] rickysuper : strongly request NFZ patching for higher M2 firmware version such as .200 or .300 because .100 really got flying and imaging issues. .200 will be fixed. no eta, I know but hope.. Thanks

[2019-05-24 18:23:06] quad808 : @channel Anyone with a Spark using NLD GO 4.1.14? Can you verify that waypoints work or don't work?

[2019-05-24 19:50:02] constant.sin : Hi, one question, do I need to flash the controller too or just the drone? thank you :)(

[2019-05-24 20:01:31] validat0r : Do work

[2019-05-24 20:14:50] constant.sin : and by flashing i mean get a patched apk

[2019-05-24 20:19:15] constant.sin : or do I need to downgrade remote as well?

[2019-05-24 20:19:24] constant.sin : sorry for the noobish questions

[2019-05-24 20:20:15] quad808 : Not necessary to flash RC....it can be on higher firmware than the bird, except in the case of the goggles and head tracking.

[2019-05-24 20:23:11] constant.sin : Oh perfect! I will upgrade the RC again to latest then. official APK will work for GO4 right?

[2019-05-24 20:58:04] constant.sin : nevermind, the official apk works and doesnt need patching (seems so far)

[2019-05-24 22:27:05] constant.sin : Thanks for replyin back to me so fast in the ticket and here Quad808 :slightly_smiling_face:

[2019-05-25 00:11:04] rickysuper : @lowellfoo780 The image transmission quality, flying stability and photo shooting quality was better in .200 or above. Cannot explain specific but averagely was better.

[2019-05-25 03:53:11] bin4ry : stop requesting that everyday, when it’s ready then it’s ready. maybe tomorrow maybe never, depends on how many times i have to react on such stuff

[2019-05-26 01:01:17] arielei : m2 01.00.0400 fcc anyone success?

[2019-05-26 01:09:20] arielei : I tried it a few times and failed on 1.0.04

[2019-05-26 03:59:46] quad808 : When the patch fails, it is 100% network related.

[2019-05-26 10:16:43] hin.lai : what the means network issue?

[2019-05-26 12:38:58] amanita : Yes everything is fine for me, m2 01.00.0400 fcc, it works just fine. I tested it today!!! NLD it's amazing!!!!:+1:

[2019-05-26 16:54:30] reaktor : Tried 0.300 FCC on Saturday. Excellent results!

[2019-05-26 17:38:06] bin4ry : network means internet issues. it cannot reach the nld server properly. deactivate your firewall/antivirus etc temporary or whitelist nld

[2019-05-26 20:26:18] flymymavic : @coldflake mate in FCC it says Mavic Pro, can you change this to Mavic 2 to save confusion as people with the MP1 will think it’s not working

[2019-05-26 20:27:56] flymymavic : Ps , NLD looks great on win10

[2019-05-26 20:42:28] quad808 : updated How to if anyone needs it

[2019-05-26 20:46:35] flymymavic : @quad808 I posted a week ago about the firmware flash stopping at 82%, I’ve just built a windows 10 and it happens with that as well, don’t want to risk retrying as I ended up with the boot loop issue last time. Any ideas, it’s the MP1

[2019-05-26 20:50:05] quad808 : 2 things...you can restart the bird, still connected to NLD...OR, try this...turn off bird, RESTART PC and try again. Sometimes that clears it. Let me know if either of those works

[2019-05-26 20:50:37] quad808 : I have another solution after that, if it still gets stuck

[2019-05-26 20:50:47] quad808 : same module everytime??

[2019-05-26 20:51:06] flymymavic : At 82% where it says flashing OS

[2019-05-26 20:51:18] flymymavic : never gets past that

[2019-05-26 20:51:28] flymymavic : Will try your suggestions

[2019-05-26 20:51:43] quad808 : The boot loop only happens with an incomplete flash and it is turned off early and not reconnected to NLD right away

[2019-05-26 20:51:53] quad808 : what firmware to what firmware?

[2019-05-26 20:52:02] flymymavic : Yeah that was Dumldore I did that with

[2019-05-26 20:52:13] flymymavic : Just test flashing from 0100 to 0000

[2019-05-26 20:52:25] quad808 : Try going to 01.03.0900 instead

[2019-05-26 20:52:37] quad808 : I assume you want to get to 01.03.0700??

[2019-05-26 20:52:45] flymymavic : Yes

[2019-05-26 20:52:58] quad808 : take the video memory card out of the side as well...

[2019-05-26 20:53:24] flymymavic : I’ve had this work before it’s in the video guide i did and it worked ok

[2019-05-26 20:53:33] quad808 : does this Pro have an internal memory card in it?

[2019-05-26 20:53:40] flymymavic : No

[2019-05-26 20:54:11] quad808 : I mean internal...not in the side. When you downgraded before, did you get any errors on startup in GO?

[2019-05-26 20:54:35] quad808 : "main controller data error"

[2019-05-26 20:54:51] flymymavic : No mate I’ve flashed this up and down several times, it’s a pre needing SD card model

[2019-05-26 20:55:09] quad808 : ok, just checking :+1:

[2019-05-26 20:55:29] flymymavic : No probs I’ll run a flash and try your suggestions and get back to you

[2019-05-26 20:55:55] quad808 : question...after the boot loop error, did you re-flash it to any other firmware?

[2019-05-26 20:56:32] flymymavic : 0100 which took about 4 tries with Dumldore as NLD and asst errored our

[2019-05-26 20:56:53] quad808 : ok, before trying to downgrade it, upgrade it to 01.04.0300

[2019-05-26 20:57:18] flymymavic : I tried upgrading and it still stuck at 82 originally

[2019-05-26 20:57:29] flymymavic : Seems up or down it sticks

[2019-05-26 20:57:57] quad808 : which module does it get stuck on?

[2019-05-26 20:57:59] flymymavic : Is there a log file ?

[2019-05-26 20:59:18] flymymavic :

[2019-05-26 20:59:48] quad808 : yes, on your PC...I have an idea

[2019-05-26 21:00:09] quad808 : hang on, lets go to PM

[2019-05-28 13:42:41] hin.lai : you means during the patch, need connect to the nld services to retrieve the content right ?

[2019-05-28 14:59:28] bin4ry : exactly!

[2019-06-01 07:55:30] quad808 : For anyone of you following along, @flymymavic was fixed

[2019-06-01 08:59:29] guson : Anyone know if IOS dji go 4.3.18 just released breaks anything around NLD mod , especially FCC.

[2019-06-01 09:27:12] bin4ry : device?

[2019-06-01 09:28:17] bin4ry : for m2 the fcc mod is done on the drone, it takes care to revert to fcc even if ce is accidentally :wink:

[2019-06-01 10:13:07] guson : So smart. Just wanted to make sure dji with this update does not create any issue for fcc (like sensing drone has a mod, and refuses to take off).

[2019-06-01 10:32:06] guson : M2 it is

[2019-06-01 16:25:43] rickysuper : M2 NLD FCC patch still hold with official IOS DJI Go 4.3.18, firmware .300, no issues when flying.

[2019-06-02 13:44:40] rickysuper : upgrade the M2P firmware to .400 before. If I down to .100 and do the NFZ patch, then upgrade to .300. Will the NFZ database be .300 or .400 ?

[2019-06-02 14:17:00] bin4ry : there are more than 1 db

[2019-06-02 14:18:56] bin4ry : if you don’t use 100 and the nfz patch then the dynamic one will be forced updated in the background without your chance to kill it. so the downgrade to 100 is nonsense anyway. if you want the static one of 300 you can downgrade to 300. if you need to disable nfz there is no other way currently as to stay on 0100 with nfz patch!

[2019-06-02 14:41:05] rickysuper : I just want to keep the NFZ database to .300 instead of .400

[2019-06-02 14:41:26] rickysuper : .400 add so much unwanted NFZ area

[2019-06-02 14:42:22] rickysuper : I don't need to disable the NFZ

[2019-06-02 15:16:29] rickysuper : tried, after upgraded to .300 from NFZ patched .100, the NFZ database of the AC back to .400 database. (I had upgrade to .400 before)..

[2019-06-02 15:40:49] bin4ry : doesn’t make sense, you cannot do it like you want, if you want 300 use 300 if 400 use 400. no ther way for you currently to do what you want. nfz db will be updated with the update to 400 automatically to 400 nfz db

[2019-06-02 16:00:18] rickysuper : But downgrade to 300 the AC NFZ database kept at 400 version

[2019-06-02 16:00:47] rickysuper : Thanks for explain and I got my answer

[2019-06-02 16:13:43] bin4ry : it depends which version! as i said there are more than 1 db! in that case yes the 0100 and nfz patch will force an empty version from that point on your version will be low :wink:

[2019-06-02 16:14:09] bin4ry : but as soon as zu update it will update too as the current hack only applies on 100

[2019-06-02 16:16:31] rickysuper : Thanks

[2019-06-04 17:33:51] quad808 : updated the NLD how to a bit

[2019-06-04 19:25:47] quad808 : request...can anyone who uses NLD with a MP2 get me a screenshot of the Flight Controller page without any tweaks to the sliders? I would appreciate it.

[2019-06-05 03:13:31] rickysuper : @quad808 FYR

[2019-06-05 13:30:38] originaldobo007 : Sweet - didn't know there was an NLD channel...

[2019-06-05 13:31:05] originaldobo007 : Why DJI decided default descent should be -3m/s is beyond me. Stupid as fuck.

[2019-06-05 13:33:12] cs2000 : Just like many DJI Decisions :wink:

[2019-06-05 13:59:07] fredmicrowave : "DJI: Awesome hardware full of stupid ideas"

[2019-06-05 14:55:24] originaldobo007 : Hey - just a BIG shout out to everyone associated with NLD! I know they get whined at and constantly asked "when is this? when is that?..." But we all super-appreciate every ounce of work these heroes do on our behalf to allow us to truly enjoy the products we paid for. These guys are rock-stars. They are committed, and don't get the appreciation they deserve, IMO. @coldflake @cs2000 @bin4ry @quad808 and anyone else. Virtual mug of beer to you all!

[2019-06-05 14:56:07] cs2000 : Appreciate the words of encouragement :slightly_smiling_face:

[2019-06-05 16:24:26] coldflake : Yes highly appreciated, awesome! I will look into what we spoke about tonight @originaldobo007

[2019-06-05 16:54:53] ben_lin : You know what's the best way?

[2019-06-05 16:54:57] ben_lin : Buy an NLD key

[2019-06-05 16:54:58] ben_lin : Lol

[2019-06-05 16:55:27] ben_lin : Seriously though these ppl can sell the exploits for a lot more than NLD

[2019-06-05 16:55:36] ben_lin : The passion is real

[2019-06-05 16:55:37] rickysuper : Bought... Lol

[2019-06-05 16:56:12] ben_lin : Still waiting for the NFZ unlock on M2P higher fw' but damn the boost is awesome

[2019-06-05 16:56:34] ben_lin : I can sit on my balcony and fly without signal loss

[2019-06-05 16:56:43] ben_lin : What fuking magic is this

[2019-06-05 17:04:37] andrwho25 : theres a m2p boost? @ben_lin

[2019-06-06 00:12:00] dronepilot : Where is the boost for Mavic 2? Didn’t find. Thanks

[2019-06-06 00:32:13] rickysuper : @rgf8aerial not released yet

[2019-06-06 00:34:37] quad808 : @rgf8aerial keep looking

[2019-06-06 00:39:17] dronepilot : Will keep looking @quad808 thanks buddy.

[2019-06-06 00:40:10] dronepilot : @rickysuper nothing yet, hope to see nfz on .200 and boost soon.

[2019-06-06 00:40:51] rickysuper : @rgf8aerial yes, me too. .200 to .300 firmware version was much more better

[2019-06-06 00:44:58] quad808 : boost hopefully will be coming soon

[2019-06-06 00:46:26] dronepilot : @rickysuper what are your thoughts comparing.200 with .300?

[2019-06-06 00:47:04] dronepilot : @quad808 I’m dreaming on the boost

[2019-06-06 00:47:42] rickysuper : @rgf8aerial Both are stable but few new feature differences.

[2019-06-06 00:49:27] rickysuper : Boost was not important to me as FCC can reach 12-14km range when no interference with stock remote control. Boost was useful only when in high interference

[2019-06-06 00:51:27] rickysuper : We all using twin batteries pack bought from Taobao market. My one was under shipment.

[2019-06-06 07:07:33] nopcode : 12-14km???

[2019-06-06 08:03:18] rickysuper : @nopcode yes

[2019-06-06 08:13:45] rickysuper : one of the screen capture

[2019-06-06 09:28:09] nopcode : @rickysuper So this is FCC mode only? Reflectors? Anything else?

[2019-06-06 09:32:24] rickysuper : @nopcode FCC with stock remote only

[2019-06-06 11:11:53] coldflake : Fucking awesome!

[2019-06-06 11:12:12] coldflake : Boost will give some extra km on top of that

[2019-06-06 11:13:33] lolo780 : FCC

[2019-06-06 11:16:17] madmaqx11 : How how how

[2019-06-06 11:46:35] fredmicrowave : CE is crap, FCC is excellent and enough in most cases. FCC with higher versions will be awesome. I would avoid boost as it pushes components hard and is unnecessary IMO.

[2019-06-06 12:37:37] ben_lin : Oops by boost I meant FCC

[2019-06-06 12:37:55] ben_lin : Being able to fly in China with FCC enabled is fun

[2019-06-06 12:38:23] ben_lin : I just watch other ppl lose signal while I still have 3 bars lol

[2019-06-06 12:41:31] originaldobo007 : You should remove NFZs and fly over Tianammen Square.

[2019-06-06 12:42:29] originaldobo007 : Does NLD work on Win 7?

[2019-06-06 12:48:56] ben_lin : Flying over Tianammen Square with approval is like prison time worth of crime

[2019-06-06 12:49:04] ben_lin : Lol

[2019-06-06 12:49:21] ben_lin : It's THE one place I wouldn't do it

[2019-06-06 12:56:23] originaldobo007 : Do the people know what shit the Govt did there?

[2019-06-06 12:57:09] originaldobo007 : I was going to try submit an official GEO unlock request over Tianammen Sq and under reason say "Democracy Flight"

[2019-06-06 13:55:38] ben_lin : Lmao

[2019-06-06 13:56:19] ben_lin : What's your payload? One pound of freedom?

[2019-06-06 13:56:55] ben_lin : Obviously the flyers know the BS gov regs otherwise you won't see Chinese customers for NLD

[2019-06-06 14:00:39] ben_lin : And get this

[2019-06-06 14:01:22] ben_lin : The DJI HQ in Shenzhen is actually in the Shenzhen airport NFZ which was put into place in 2016 or 17

[2019-06-06 14:01:36] ben_lin : @originaldobo007

[2019-06-06 14:34:29] rickysuper : @originaldobo007 They will reject your submit as they don't know what is "Democracy". :D

[2019-06-06 15:00:56] cantrepeat : You were supposed to bring balance to the force, not destroy it.

[2019-06-06 16:56:54] originaldobo007 : Here's something interesting:

[2019-06-06 16:59:40] cs2000 : Lol that poor guy :joy:

[2019-06-06 17:50:33] rickysuper : Nowadays many of the students in Hong Kong do not know what's happened on that day ! Sucking brain washing education.

[2019-06-06 17:53:16] pross : Thats education in general, they dont teach history any more. I had to explain to a 25yr old what D-Day is today, and hes european.

[2019-06-06 17:53:49] originaldobo007 : I think he was actually telling the truth - he had zero idea on what I was talking about when it came to Tianamen Sq

[2019-06-06 17:54:18] originaldobo007 : @pross That 25 y.o should be taken behind a shed and beaten.

[2019-06-06 17:54:48] pross : I know.

[2019-06-06 19:19:48] flydji : and western education misses, that the russians did the real job... by binding 2/3 of the german forces... otherwise dday would have never happened

[2019-06-06 19:21:09] flydji : flight for democracy is nice... look at syria, iraq, libya and so on, what a shame

[2019-06-06 19:46:34] ben_lin : you know whats worse though... the Chinese government, when questioned by foreign media, OPENLY ADMITS the existence of the Tiananmen Square massacre and take it as a neccessary move to ensure the political and economical stability of the country at the time

[2019-06-06 19:50:38] quad808 : The western world want their inexpensive Chinese produced goods and don't really, REALLY care

[2019-06-06 19:52:15] quad808 : The latest iPhone, DJI drone, you name it. Every Chinese produced good that you purchase supports the Chinese government and their policies. Thats the bottom line, and I am just as guilty as the next guy

[2019-06-06 19:53:29] quad808 : And not to pick on China...if it's not China, it will be the next place that is found that has cheap labor costs

[2019-06-06 20:02:26] ben_lin : The corporations want the Chinese market though

[2019-06-06 20:03:02] ben_lin : Which makes the CN-West relations really fun to watch

[2019-06-06 20:12:28] madmaqx11 : You guys all sound like o'l timers :grin:

[2019-06-06 20:14:53] quad808 : GET OFF MY LAWN

[2019-06-06 20:17:32] pross : 48 isnt that old

[2019-06-06 21:07:52] originaldobo007 : The thing that I find kind of funny is that any major company in China, DJI being no exception, is in someways an extension of the Chinese government. Because of that simple fact, I find that the progress of an NLD in some respects is fighting a proxy panel with an institution that has a bad human rights record. VIVA NLD

[2019-06-07 04:45:48] ben_lin : Not qutie but close

[2019-06-07 04:46:07] ben_lin : the companies do not want to be slaves of the gov obviously

[2019-06-07 04:46:30] ben_lin : but they are subject to strict laws that give them no commercial privacy

[2019-06-07 04:46:36] ben_lin : and state capitialism is insane

[2019-06-07 16:57:20] dnacho :

[2019-06-07 16:57:31] dnacho : Could this mavic 2 pro have the nfz removed?

[2019-06-07 17:02:09] quad808 : You would need to downgrade firmware to 01.00.0100 via NLD, then yes you can remove NFZ

[2019-06-07 17:07:39] dnacho : And it would remove all nfz right?

[2019-06-07 17:58:51] lolo780 : Yes

[2019-06-07 18:32:09] quad808 : well. Yes and no...there are some hard coded areas that we are working on, but normally only China areas and US capitol

[2019-06-07 18:32:47] quad808 : coordinates are located in another place on the drone, from what I understand

[2019-06-07 18:33:13] quad808 : 99.9% is removed

[2019-06-11 17:26:32] zapf : <https://twitter.com/nolimitdronez/status/1000659103440662529?s=21> are y'all still looking? I messaged last year but didn't get a response

[2019-06-11 20:01:08] lolo780 : I have a bricked i2

[2019-06-11 20:03:27] originaldobo007 : You should send it to DJI and whine at them.

[2019-06-11 20:03:34] originaldobo007 : Get them to replace it.

[2019-06-11 20:06:23] lolo780 : I'll see. I swapped a new cine core in and will deal with it later. Dji takes their sweet time to swap apple pro res and cinema dng licenses around.

[2019-06-11 20:34:49] coldflake : @zapf yes we are still looking ;) But even more importantly we are now ready as well ;)

[2019-06-11 20:49:49] zapf : Thanks @coldflake . We have folk who may be interested in testing

[2019-06-12 05:23:59] coldflake : That would be nice, we do know that nld works for M series but we just need to refine it and set the parameters for the mods

[2019-06-12 14:39:48] nopcode : NLD FCC patch is unproblematic to install on 0400? how can i verify that i

[2019-06-12 14:39:52] nopcode : 'ts in fcc mode?

[2019-06-12 14:45:42] pross : when you start up go4 in camera mode it will show a popup saying aircraft updated to meet local rules or something

[2019-06-12 14:46:28] pross : >If you are in FCC mode, the “~1km” line is between 80 and 90 dbm/mhz and the “~4km” line is juste upper 100 dbm/mhz, so between 90 and 100dbm/mhz.

[2019-06-12 14:47:09] rickysuper : @pross No popup when starting Go4

[2019-06-12 14:47:39] pross : I’ll video when I get home if you like

[2019-06-12 14:51:05] amanita : This is what you need to see in dji go 4

[2019-06-12 14:58:26] nopcode : and if the 1km line is below -90 its CE mode?

[2019-06-12 15:03:57] pross : FCC mode <https://snag.gy/s8XwQo.jpg>

[2019-06-12 15:05:23] pross : Here is the popup I see on startup, every time. Im in the UK <https://snag.gy/XDmyh9.jpg>

[2019-06-12 15:24:32] amanita : Yes!

[2019-06-12 15:47:18] nopcode : ok thanks so much! finally bought NLD

[2019-06-12 15:50:30] nopcode : ehr where is the usb port on the m2...

[2019-06-12 15:50:30] nopcode : :smile:

[2019-06-12 15:53:23] nopcode : ah nevermind found it...

[2019-06-12 15:56:21] nopcode : i'm getting "failed to activate subscription"

[2019-06-12 15:59:47] nopcode : also "out of system resources" popups while typing my email

[2019-06-12 16:13:47] nopcode : i put the app on the desktop...

[2019-06-12 16:21:04] bin4ry : restart the app after you activated it

[2019-06-12 16:21:11] bin4ry : and put in an email

[2019-06-12 16:21:21] bin4ry : there was a bug not sure if fixed

[2019-06-12 16:23:14] nopcode : it doesnt activate tho

[2019-06-12 16:23:19] nopcode : and i've put an email every time

[2019-06-12 16:24:08] nopcode : first thing i did was click the FCC fucntion

[2019-06-12 16:24:12] nopcode : and then it asked me to activate

[2019-06-12 16:24:15] nopcode : didnt work

[2019-06-12 16:24:19] nopcode : then i tried "activate bird"

[2019-06-12 16:26:42] nopcode : it does detect the bird fine tho (lower left corner)

[2019-06-12 16:29:46] nopcode : i gotta head out in half an hour

[2019-06-12 16:29:50] nopcode : any ideas?

[2019-06-12 16:30:02] nopcode : and yeah, i'm on windows 10 now

[2019-06-12 16:33:09] nopcode : when i click activate it does a HTTP POST with a "data" field

[2019-06-12 16:33:12] nopcode : and gets back an OK

[2019-06-12 16:38:14] nopcode : @bin4ry I sent you a PM with the communication i captured, gotta leave now bbl

[2019-06-12 20:10:46] nopcode : so yeah, still doesnt work

[2019-06-12 20:45:35] coldflake : @nopcode can you please send me a pm with the nld screen shot

[2019-06-12 20:45:48] nopcode : i tried cracking it but i got "Patching failed" at about 40% of the FCC patch

[2019-06-12 20:45:54] coldflake : Close nld open it again and take a screen shot of the nld main screen

[2019-06-12 20:46:14] nopcode : with the bird connected?

[2019-06-12 20:46:24] coldflake : So it's now activated and another problem now? :)

[2019-06-12 20:46:53] nopcode : i dont know. i bypassed the activation failure messagebox by changing a register at some point

[2019-06-12 20:47:05] nopcode : but it's not legitimately "activated"

[2019-06-12 20:47:13] nopcode : wait lemme get you that screenshot

[2019-06-12 20:47:24] coldflake : Ok

[2019-06-12 20:47:58] nopcode : app found the drone

[2019-06-12 20:47:59] nopcode : started the app. connected usb. powered up drone. drive appears in explorer.

[2019-06-12 20:48:10] coldflake : Ok

[2019-06-12 20:49:00] nopcode : here you go. its FW 0400 so the FCC patch should atleast work

[2019-06-12 20:49:13] nopcode : i cant show you the activation failujre too

[2019-06-12 20:55:26] quad808 : Check your network settings and make sure NLD is not being blocked in anyway by firewall, antivirus and Windows defender

[2019-06-12 21:00:42] nopcode : well it is getting http replies

[2019-06-12 21:01:13] nopcode : i think i've tried with win 10 firewall disabled

[2019-06-12 21:01:26] nopcode : i dont have any 3rd party FW / antivirus installed

[2019-06-12 21:06:10] nopcode : tbh it's a pretty fresh install of win10

[2019-06-13 03:08:12] cat.db : Does nld only support mavic 2 to use fcc or also support the other plane ？

[2019-06-13 03:35:15] quad808 : any drone that can use NLD GO has FCC by default. The FCC patch is only for the M2 currently, so no NLD GO needed only for that model.

[2019-06-13 03:36:19] quad808 : All models are planned to be supported by the patch, if they can be. I don't know for sure about the Air, or the P4P 2.0, if the FCC patch can be modified for them too.

[2019-06-13 16:17:12] flymymavic : @quad808 if you are on support tonight can you drop me a PM around 9pm my time mate

[2019-06-13 19:01:09] cantrepeat : And @quad808 bring beer and russian brides too pls!!

[2019-06-13 20:05:27] quad808 : :joy:

[2019-06-13 20:09:00] flymymavic : guys just talking to quad808 i have a module that is refusing to flash, its the 1860 module, anyone have an idea if its possible to remove it and then flash a new version into the quad, or do a clean out of the backup module ?

[2019-06-13 21:10:35] ben_lin : !deadhooker

[2019-06-14 01:18:30] samdi : @coldflake My M2 crash wire fell on the floor, because I bought DJI Care Refresh, DJI has already replaced me with a new M2, what information I need to provide to send to the mail, I can continue to use NLD.

[2019-06-14 01:49:20] quad808 : create a support ticket, explain details and attach your NLD purchase info, AND info from DJI about the replacement and we will get you sorted

[2019-06-14 05:22:25] bin4ry : @flymymavic i haven’t looked in anything here so my answer is a shot in the black. 1860 module on m1 right? did you let it sit there for some time and/or rebooted the drone while connected? sounds like a timing problem. of the drone to continue the process

[2019-06-14 10:05:17] flymymavic : @bin4ry yeah been through a whole lot with quad808, he thinks my module may have got changed to read only after I hit a flashing error a while back. Any idea if I can ADB into the quad and check the module permissions maybe

[2019-06-14 12:42:47] coldflake : Adb is not possible, but I will check your logs

[2019-06-14 12:43:18] coldflake : @quad808 send me a screen shot including your key and I will look into it today mate

[2019-06-14 18:56:16] dronepilot : Anyone here can give me a help on how to manually downgrade the drone database?

[2019-06-14 19:06:18] windshearfl : Any support available atm?

[2019-06-14 19:07:43] windshearfl : This is all I get on a Mavic Pro. FW V01.04.0500.

[2019-06-14 19:19:32] quad808 : @windshearfl this is network related. Check your firewall/antivirus and Windows defender settings and make sure NLD is not being blocked from accessing NLD servers.

[2019-06-14 19:21:13] quad808 : @rgf8aerial read this

[2019-06-14 19:21:45] quad808 : open a support ticket for direct help

[2019-06-14 19:22:31] windshearfl : [support.nolimitdronez.com](http://support.nolimitdronez.com) is down

[2019-06-14 19:23:16] windshearfl : Never mind, just loaded

[2019-06-14 19:23:49] windshearfl : Also, I read it, followed all the instructions to the letter, still no love.

[2019-06-14 19:37:31] quad808 : 100% network related

[2019-06-14 20:20:02] windshearfl : Makes sense. Troubleshooting on my end.

[2019-06-14 20:20:06] windshearfl : Thank you

[2019-06-14 20:27:41] bobdole : any guesstimated eta on boost for mavic 2?

[2019-06-14 21:58:47] flymymavic : @quad808 @coldflake cheers lads, screen shot coming

[2019-06-14 21:59:31] quad808 : PM coldflake with your NLD activation number

[2019-06-14 22:00:12] flymymavic : On it now just switching to laptop

[2019-06-15 22:27:15] originaldobo007 : @quad808 I am in the US but ran the FCC patch on NLD- I’m going to Europe for a bit and figured running it would keep the bird doing FCC when I’m visiting there. That’s correct, right?

[2019-06-15 23:25:24] quad808 : yes, absolutely. Look at the attached pictures of CE mode vs FCC mode. CE - FCC - FCC on SC You are looking at the white lines near 90 and 100, note the changes

[2019-06-16 08:36:15] geeteshdubey : Does nld support M2Enterprise param mods now?

[2019-06-16 12:59:02] rainer.kerncn : @quad808 Thank you for the info. Had same question. I still consider using DJI Care refresh as I am over their warranty period and even with the 01.00.0400 firmware on the M2P I still have the problems with the tilted horizon which is not adjustable (I can correct it via the APP for one scene but as soon as I fly a bit it gets tilted again and I have to again adjust it new). I attached here a picture to understand if others have same issue (I had mentioned it here and most feedback was that horizon is not an issue on M2P and most likely my IMU is faulty). I had done numerous calibrations of IMU, Gimbal and Compass but all same result

[2019-06-16 13:00:04] rainer.kerncn : By the way - I had activated FCC through NLD and worked like a charm :-) Thanks for the good work!!

[2019-06-16 13:04:38] rainer.kerncn : Also other question - can I also flash the controller with NLD or only the bird? DJI has removed the 01.00.0100 for the Controller from DJI Assistant

[2019-06-16 16:21:00] quad808 : @rainer.kerncn If you still have a problem, I would get it corrected by DJI...you shouldn't have to put up with any problems for such an expensive bird. You don't need to flash the controller and can leave it as is. For the M2, NLD is just for the bird. Remember that NLD only uses stock DJI firmware to flash.

[2019-06-17 03:47:30] rickysuper : I bought NLD key and using without issues. My friend don't have PC and want me help him to patch his M2, can I plug his drone to my PC and enter his key ? Will these steps affect my key ? Thanks

[2019-06-17 05:20:18] bjoneseying : Do NLD do bulk discounts?

[2019-06-17 06:34:22] cat.db : yes,you can but two key and connect your friend 's to your computer to use nld .

[2019-06-17 06:50:51] rickysuper : Thanks @orangeclassmate

[2019-06-17 07:36:19] coldflake : That is spot on @orangeclassmate good answer

[2019-06-17 07:38:03] coldflake : @bjoneseying Yes, and for drone repair shops for instance we give a good discount

[2019-06-17 07:43:40] bjoneseying : How about for 3 birds?

[2019-06-17 10:15:31] cantrepeat : How about for 3 Russian brides?

[2019-06-17 15:44:22] ben_lin : ! deadhooker

[2019-06-17 15:44:32] ben_lin : !deadhookers

[2019-06-17 15:44:46] ben_lin : !deadhooker

[2019-06-17 17:08:25] quad808 : We prefer Chinese bot brides. Just sayin.

[2019-06-17 17:08:53] quad808 : But they need to make ODB scanners.

[2019-06-17 20:50:02] lolo780 : 3 French hens

[2019-06-17 20:50:36] quad808 : 2 turtle doves

[2019-06-17 21:09:57] chipmangini : And a partridge in a pear of bQQbs...

[2019-06-18 15:56:51] cantrepeat : anyone else getting crazy fake phishing paypal emails?

[2019-06-18 17:15:44] bobdole : no those are legit.

[2019-06-18 17:16:06] bobdole : never not help out a priest in nigeria

[2019-06-18 18:00:16] pross : I have a bunch of caught masterbating bitcoin scams if you want to swap

[2019-06-18 18:06:55] quad808 : WHAT? SCAM? oh crap....nm

[2019-06-19 06:56:17] flymymavic : @catalinaskirace loads, just forward them to [spoof@paypal.com](mailto:spoof@paypal.com)

[2019-06-19 10:25:01] cantrepeat : Yeah, I sent just one to them. All 50 of them were the same.

[2019-06-22 06:12:17] lolo780 :

[2019-06-22 06:12:41] lolo780 : I2 fails flashing at OFDM every time

[2019-06-22 20:16:58] quad808 : Try this...close NLD, restart drone and restart PC, bring everything back up and reflash that same firmware

[2019-06-22 21:27:02] originaldobo007 : @quad808 will nfz2 support latest fw?

[2019-06-22 22:24:48] quad808 : That, I do not know.

[2019-06-23 00:18:50] rickysuper : @originaldobo007 As I know, not yet.

[2019-06-23 06:12:47] bin4ry : no

[2019-06-23 10:32:16] coldflake : No

[2019-06-23 13:36:00] flymymavic : @lowellfoo780 I had it freeze at 82% with windows 7 once I changed to win10 it worked fine

[2019-06-23 14:13:29] rickysuper : My NLD happened once error prompt and need to force quit during firmware downgrading, lucky that it was at the firmware download process. Reboot the notebook and can process again. Window10

[2019-06-23 14:52:47] lolo780 : So far no luck with the i2. Win10

[2019-06-23 19:35:52] quad808 : does it get stuck on the same module everytime? Which is it? The I2's are very, very finicky to flash

[2019-06-24 04:01:23] lolo780 : OFDM 103

[2019-06-24 04:01:34] lolo780 : Same every time. 25%

[2019-06-24 04:11:37] quad808 : can you reflash the same version that is currently installed?

[2019-06-24 05:19:56] lolo780 : No, tried several version I including current

[2019-06-25 04:40:27] reaktor : I had problems getting stuck at 25% with M2. Run app as administrator, disable all firewalls, VPNs & virus scanners. After I did all this I finally managed to flash.

[2019-06-25 04:42:10] reaktor : Bit Defender detects some parts of DJI Assistant as a trojan BTW

[2019-06-25 14:56:12] rickysuper : NLD seems has some issues on my Win10. I had several system resources error during key activation and Application error on firmware downgrading process.

[2019-06-25 14:58:50] rickysuper :

[2019-06-25 17:48:32] 007 : Try run as or close anti virus or int. problem

[2019-06-25 17:49:27] 007 : Works great on my win 10

[2019-06-25 19:23:01] bobdole : windows just gets worse and worse.. it is ripe for termination imo. i'd sell microsoft if i had any

[2019-06-25 19:24:10] bobdole : oh wait nevermind me... windows 10 is released and 5 years later stock more than doubles. shows what i know

[2019-06-25 19:26:19] pross : I keep it on a vm ... in a drawer ... away from anything electrical

[2019-06-25 23:19:09] quad808 : NLD peeps. Now that NLD supports flashing user firmware, I have custom rolled firmware that needs testing. Spark, P4P, P4 and I2 No idea if bad things will happen, but I don't think so, based on other custom rolled firmware. Who wants to give it a whirl? pm me

[2019-06-26 00:33:29] cat.db : I tried it three times and re-swiped the official firmware, but I couldn't use fcc patch. What's going on, please?

[2019-06-26 01:31:42] quad808 : network settings. DIsable all antivirus, and firewalls. Something is blocking NLDs access to our servers. Also run NLD as admin.

[2019-06-26 02:41:57] cat.db : how to setting rnds network?

[2019-06-26 03:06:16] cat.db : i have met 3 devices ,it is the some wrong .

[2019-06-26 14:14:11] cat.db : I replaced 3 computers, tried win7 and win10, can not, aircraft firmware also refreshed many times, open the FCC still failed,:rolling_on_the_floor_laughing:

[2019-06-26 14:15:22] bin4ry : stop trying to sniff the pakets and it will work

[2019-06-26 14:15:35] bin4ry : it won't work if you try to sniff the traffic

[2019-06-26 17:30:12] joker_x3 : HSTS?:smile: @bin4ry

[2019-06-26 22:01:44] mrbracht : Yay boost! Thanks guys!

[2019-06-26 22:16:21] lolo780 : Yeah!

[2019-06-26 22:25:53] pross : Boost, yea.. how is it implemented? Do you enable it in the PC app then its always enabled or is it switchable?

[2019-06-26 22:32:39] mrbracht : Seems to be only enables in the app on PC.

[2019-06-26 23:37:40] rickw001 : mavic pro ,no boost:sob:

[2019-06-26 23:42:26] quad808 : NLD GO 4.1.22 Boost is there

[2019-06-26 23:43:43] rickw001 : if you change script

[2019-06-27 01:14:24] dronepilot : Just did the boost on the M2, it automatically stayed 1.8w just patched. Question didn’t understand nfz stuff, I’m on .200 firmware and says incompatible. Thanks

[2019-06-27 01:29:09] cat.db : how to realize 1.8w？

[2019-06-27 01:43:48] rickysuper : @rgf8aerial NFZ patch only support .100

[2019-06-27 02:01:32] dronepilot : Ah thanks @rickysuper , though it was working on other firmware.

[2019-06-27 02:05:35] originaldobo007 : I guess you can't adjust the power - it automatically stays at 1.8w?

[2019-06-27 02:06:49] rickysuper : should be like that

[2019-06-27 02:19:16] originaldobo007 : Ok. I just don’t want to fry my Smart RC.

[2019-06-27 02:24:45] dronepilot : Questio enabled boost on the M2 and now the fcc line stays in ce is this correct? I was using fcc patch.

[2019-06-27 02:48:35] bobdole : Anybody experience issues at 1.8? Controller resets etc?

[2019-06-27 02:51:55] cat.db : use ios app,can get 1.9w

[2019-06-27 02:54:43] quad808 : Can you who used the FCC patch prior to using boost, check if they are still in FCC mode with boost, or did it go back to CE mode with boost??

[2019-06-27 02:56:22] quad808 : Also, for anyone who has a M2 that after enabling the NFZ patch, still couldn't fly, due to hard coded NFZ area, confirm that now running the new NFZ patch, after testing, all good??

[2019-06-27 03:18:44] originaldobo007 : How do you deactivate boost? Is it on permanently once you apply the patch?

[2019-06-27 03:36:50] rickysuper : may be change back to normal FCC

[2019-06-27 05:48:46] bin4ry : boost button includes fcc mode

[2019-06-27 05:49:57] bin4ry : you can apply one patch (normal fcc or boost) at the same time only. that is why the boost script also applies fcc for you. so if you want to deactivate boost you can just click the fcc button and you will be back in normal fcc mode without boost :wink:

[2019-06-27 06:25:31] cat.db : when we can use boost on m2?

[2019-06-27 06:34:07] lolo780 : When you're flying?

[2019-06-27 06:46:39] rickysuper : Power on your M2 will be on boost mode

[2019-06-27 09:55:04] dronepilot : I tested out the boost didn’t se any difference over fcc only. How can i disable the boost patch and go only fcc?

[2019-06-27 10:02:02] bin4ry : read a few lines up !?

[2019-06-27 10:03:02] dronepilot : Thanks mate just look up.

[2019-06-27 12:22:01] originaldobo007 : Anyone else test boost yet? I haven't had the chance - I'm wondering if people see any difference.

[2019-06-27 18:20:26] originaldobo007 : People online are saying that boost knocks it to CE mode and is worse than just FCC mode alone.

[2019-06-27 18:21:45] lolo780 : Don't believe everything you read. Boost on the M1 consistantly gets me 1/3 more distance.

[2019-06-27 18:23:10] pross : I have an RF meter, not tried the new patch yet.. because work

[2019-06-27 18:29:36] bin4ry : dudes boost is on top of fcc in the code, i wonder how it should fall into ce

[2019-06-27 18:30:14] bin4ry : either it’s a bug (can happen) or some ppl are stupid (more likely)

[2019-06-27 18:31:03] pross : Does the controller throttle back if it gets hot? just throwing it out there

[2019-06-27 18:35:51] bin4ry : hm no idea really

[2019-06-27 18:44:42] originaldobo007 : @lowellfoo780 1/3 more than fcc?

[2019-06-27 18:45:38] lolo780 : Yeah

[2019-06-27 18:45:59] originaldobo007 : ok - I'll test it tomorrow (weather permitting). Here's what I was referring to:

[2019-06-27 18:46:28] originaldobo007 : If you test it later, pls let everyone know your results

[2019-06-27 19:02:40] bin4ry : ah i am not sure if the smart controller can do boost

[2019-06-27 19:03:43] pross : Yea I asked that the other day

[2019-06-27 19:05:11] bin4ry : i don’t know i have never seen a smart controller

[2019-06-27 19:06:08] bin4ry : but if it doesn’t understand it might fall back to standard mode

[2019-06-27 19:06:19] bin4ry : which might be ce in that cases

[2019-06-27 19:06:27] bin4ry : atleast that would be an explanation

[2019-06-27 19:30:53] quad808 : We need screenshots of the smart controller, FCC mode, then boost mode enabled, then FCC mode again. So we can compare if boost on the SC kicks it out of FCC mode.

[2019-06-27 19:32:26] pross : I was considering buying one, trying to save up for bike tho

[2019-06-27 19:53:53] quad808 : is this correct for power: CE is <=20dBm (100mW) FCC is <=26dBm(<400mW)

[2019-06-27 19:54:15] quad808 : Boost would be what?

[2019-06-27 19:55:39] quad808 : 1800mW?

[2019-06-27 21:39:57] dronepilot : Yes on the SC when enable boost doesn’t show fcc anymore.

[2019-06-27 23:06:23] amanita : I can confirm that FCC Boost is not working in mavic 2 pro. I have measured the signal with immersionrc rf meter V2 in FCC the signal was very strong, when i use NLD fcc boost the signal was very low. I tried it three times and the result was the same. The last time i have patch the fcc boost, i started mavic 2 pro and the controller without my phone and the signal was very strong as in FCC, once I connect the mobile and turn on dji go 4 the signal returned to CE mode.

[2019-06-27 23:12:27] quad808 : and this is the normal RC, yes? If you click back on FCC mode, FCC mode should return..please comfirm

[2019-06-27 23:14:50] pross : Thats the rf meter i have, cool

[2019-06-27 23:16:52] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.9.3.0

[2019-06-27 23:20:00] amanita : Yes rhe normal RC. And yes, when i click back on FCC mode, FCC mode returns!

[2019-06-27 23:21:22] quad808 : thanks for this, it is very helpful!

[2019-06-27 23:39:42] quad808 : still there?

[2019-06-27 23:40:58] quad808 : @amanita Can you try this...enable boost mode. Turn off drone, RC off. Turn drone on first, then turn on RC, test. See if still in FCC mode and higher output in boost mode?

[2019-06-27 23:53:59] amanita : I have try it this way. It is stil in FCC mode not boost. But once I connect the mobile and turn on dji go 4 the signal returned to CE mode.

[2019-06-27 23:55:58] quad808 : crap.

[2019-06-27 23:56:41] quad808 : I am trying to figure out if a certain sequence works. Does it turn to CE only when GO is connected?

[2019-06-28 00:06:38] amanita : Yes, only when GO is connected.

[2019-06-28 02:20:54] reaktor : I have to agree, i haven't noticed any increase in range since the last FCC mod. I work in television. Im on leave now but from 8th July I will have access to a broadcast spectrum analyser. I can report back with power levels at different frequencies for different mods. If needed i can drop in to work this Sunday and conduct some tests.

[2019-06-28 05:05:32] coldflake : You can not use meter to Measure it that way

[2019-06-28 05:05:56] coldflake : The drone turns up and down the signal strength depending on the distance to the RC

[2019-06-28 05:06:18] coldflake : Which explains also why it appears stronger with the RC off

[2019-06-28 05:08:54] coldflake : The only way to test is to go into the field and do a range test

[2019-06-28 05:49:58] bobdole : i havent beena ble to test it yet just got back home today

[2019-06-28 05:52:20] reaktor : This testing method worked with Phantom 4 in the workshop. FCC mode clearly increased signal strength. Not sure if Occusync is different

[2019-06-28 07:42:00] rickysuper : M2 FCC and Boost can be measure with meters, value will increase in FCC and boost mode

[2019-06-28 07:52:19] coldflake : Ok that is good news then, usually people have been unable to measure any difference between FCC and boost FCC 2 channel is enabled when using the boost mode in nld

[2019-06-28 07:53:14] coldflake : The boost tells it to raise the max output power which is does dynamically depending on the distance between bird and RC

[2019-06-28 07:54:01] coldflake : Meaning that you can not measure the difference between FCC and boost mode because they are essentially the same just with a higher max limit.

[2019-06-28 07:54:23] coldflake : Go and do a range test instead

[2019-06-28 08:17:15] cs2000 : This has been known about for a long while by the way. The drones dont sit there and pump out 1.5, 1.8w/whatever at all times, the signal power is modulated (increased when needed), most likely to cut down on heat and more importantly preserve the limited battery life.

[2019-06-28 10:51:02] dronepilot : Boost mode doesn’t show fcc line is this correct?

[2019-06-28 13:48:57] bobdole : test it like this? normal fcc mode, turn on ac and watch it ramp up signal strength looking for remote... then try it again with the boost

[2019-06-28 14:55:28] bobdole : well i just tried it out and boost 1.8w works great. almost feels like i've got an amp on the aircraft. actually does a lot better (with the 1.8w boost and my amplified rc antenna) than my mp1 with the amplified antenna + birdside amp. i hope i dont fry anything

[2019-06-28 14:58:38] bobdole : that was on 2.4ghz. i'll try it maybe tomorrow with 5.8ghz unamped and my tbs triumph antennas (these don't work as good as stock dji controller antennas)

[2019-06-28 16:32:50] rickysuper : My friend tried flying after NLD boost mode patched, not work. Range only got CE result. M2Z.

[2019-06-28 16:52:16] dronepilot : Same here only CE result using boost, tryed on 2 diferente bird M2Z and M2P normal rc and sc.

[2019-06-28 16:57:32] quad808 : @jacksphone can you post a screen shot of your GO RC output in boost mode? Does it show CE? Not sure whats up, but lots of tickets for boost mode dropping the RC to CE mode

[2019-06-28 16:57:46] quad808 : working for some, not working for many

[2019-06-28 17:00:03] bobdole : Ill try when I get a chance tomorrow. So far it looks like the people with issues are in CE areas? Possible that fcc is not sticking?

[2019-06-28 17:00:23] quad808 : Thats what it looks like, correct.

[2019-06-28 17:01:00] quad808 : But boost for you is a Win?

[2019-06-28 17:01:24] bobdole : Im a software qa psychic. Ask my old coworkers at Sony from 15 years ago

[2019-06-28 17:01:52] bobdole : Yeah boost is working. I tried it with an amp. Feels like the ac has an amp on it too

[2019-06-28 17:03:53] quad808 : Yes, with this boost method, both craft and RC are boosted...did your RC get hot?

[2019-06-28 17:04:05] quad808 : or not noticible?

[2019-06-28 17:06:41] bobdole : Nope. No issues....yet

[2019-06-28 17:07:37] quad808 : ok, lemme know if you think it gets really hot, just curious

[2019-06-28 17:08:48] bobdole : With mp1 my controller would just reset. We'll see. Kind of dangerous without precision landing if the controller dies

[2019-06-28 17:51:59] bobdole :

[2019-06-28 17:53:35] lolo780 : Sounds like the issue is with M2? Boost always worked fine on M1

[2019-06-28 17:53:46] bobdole : How does this look? This is unamped 5.8ghz about half mile away through trees and houses.

[2019-06-28 17:59:26] bobdole : Controller was getting warm after 15 minutes. You could smell things getting hotter than normal but no issues

[2019-06-28 19:08:08] quad808 : excellent, boosted FCC mode

[2019-06-28 19:08:51] quad808 : I am slightly worried that using prolonged boost will burn out controllers, but will see

[2019-06-28 19:09:44] quad808 : hopefully it is within tolerances. Can you switch between 2.4 and 5.8?

[2019-06-28 19:15:56] bobdole : yes - i tried both

[2019-06-28 19:22:01] quad808 : k, thanks, some user of SC say they can't switch between the two modes

[2019-06-28 19:25:01] bobdole : i'm using regular m2p rc

[2019-06-28 19:25:18] quad808 : ahhhhh...k, thanks

[2019-06-28 23:32:03] quad808 : Those of you who are in CE country, try the boost again.

[2019-06-28 23:56:20] originaldobo007 : Including smart RC?

[2019-06-28 23:56:30] originaldobo007 : Does it work on the smart RC?

[2019-06-29 01:06:48] dronepilot : SC doesn’t show fcc when boost patch applied.

[2019-06-29 01:07:05] dronepilot : Didn’t test normal rc yet

[2019-06-29 01:08:40] mrbracht : I tested the smart controller last night, I live in Minnesota and I couldn't get any further with boost. So yeah, another confirmation that boost isn't working on the SC.

[2019-06-29 02:03:49] dronepilot : Trash boost sc. :sleepy:

[2019-06-29 02:09:56] quad808 : We are thinking that boost is not possible on the SC, may not understand the commands.

[2019-06-29 02:16:13] bjoneseying : Its a not-so "Smart" controller then

[2019-06-29 03:56:08] bjoneseying : Trying to use prepaid visa card to buy NLD but it wont take

[2019-06-29 04:23:23] bobdole : its your punishment for posting all those horrible youtube videos

[2019-06-29 04:48:41] bjoneseying : aww cmon everyone loves Bill and the Canadian drone club :joy:

[2019-06-29 08:20:20] samdi : After several unsuccessful attempts, firmware has been updated many times, which is the same problem?

[2019-06-29 08:51:53] bin4ry : if you get this even when firmware updating it is a network issue of some kind. most likely an firewall/antivirus is blocking the connection. so whitelist it or disable antiviru and firewall shortly. for 99% of the users this problem is solved then

[2019-06-29 15:21:43] rickysuper : Edit: He was using Smart Control

[2019-06-29 18:29:04] dnacho : Can any fw version of the m2z be downgraded?

[2019-06-29 18:29:30] quad808 : check the birdmap

[2019-06-29 22:37:45] originaldobo007 : Smart RC?

[2019-06-30 00:48:15] bobdole : regular m2p rc with 1.8w boost ran for 40+ minutes straight no issues. didn't even get hot, but was sitting in 68F airconditioned car. once it lost signal randomly and reconnected at the 35min mark, but that could have been my fat hand knocking the amplified antenna loose

[2019-06-30 01:51:06] rickysuper : Seems that SC was not work, RC no problem

[2019-06-30 20:19:49] bobdole : hey does the 1.8w fcc boost with the mp2 work the same as it was with the dji go app on the mp1 (other than the controller initiating the change the ac on the mp1)?

[2019-06-30 20:46:01] quad808 : From what coldflake said, no it doesn't. It doesn't immediately output full boost mode, but increases power as needed to try and keep the signal at a high level.

[2019-06-30 21:04:44] bobdole : i might be wrong, but it seems like the aircraft output signal is better than it was with the mp1.

[2019-06-30 22:43:52] quad808 : Thats good news. I don't have a M2, so can't test it.

[2019-07-01 01:14:34] originaldobo007 : Is it confirmed that it doesn’t work with the Smart RC?

[2019-07-01 02:33:54] rickysuper : My friend tried SC with NLD boost not work, range like CE

[2019-07-01 02:49:29] originaldobo007 : NLD should put a disclaimer up that this doesn’t work with the Smart RC then.

[2019-07-01 03:36:50] bjoneseying : I wonder if could be tested in increments - e.g. 0.4W = FCC - does it work if boosted to 0.4W ?

[2019-07-01 03:37:21] bjoneseying : And if so, what is its upper limit etc

[2019-07-01 13:52:35] rickysuper : SC boost issue seems fixed last night

[2019-07-01 16:08:02] fredmicrowave : Fast as always @jacksphone

[2019-07-01 16:11:30] bin4ry : just do it @jacksphone :stuck_out_tongue_closed_eyes:

[2019-07-01 16:40:34] coldflake : Everyone

[2019-07-01 20:02:11] quad808 : server end

[2019-07-01 20:10:09] coldflake : Server end fix

[2019-07-02 02:21:47] dronepilot : Just tested boost on SC it rocks solid, now shows fcc line. The range got much better over fcc only.

[2019-07-02 02:22:26] mrbracht : Anything get hot on the SC?

[2019-07-02 04:17:35] bjoneseying : asides from the price? :smile:

[2019-07-02 04:18:09] bjoneseying : I tested it yesterday with both SC and RC linked in boost mode (dual RC) and the range seemed about same, so unsure if it already applied or not, only seemed marginally better than FCC

[2019-07-02 04:18:29] bjoneseying : I was expecting the SC to cut out and RC continue in that scenario

[2019-07-02 09:25:27] dronepilot : @mrbracht nothing got hot on the SC, everything seemed normal 20 min of flight.

[2019-07-02 11:26:30] cs2000 : @b3019199

[2019-07-02 11:26:33] b3019199 : @b3019199 has joined the channel

[2019-07-02 11:27:27] b3019199 : @cs2000 You might not be allowed to tell me but

[2019-07-02 11:27:43] b3019199 : did you bypass SecNeo or patch support into an old version?

[2019-07-02 11:28:49] cs2000 : These are the options we have in our Flight Controller for the M2, NLD can also remove NFZ limits, but not yet altitude limits. And of course firmware up and downgrade

[2019-07-02 11:29:42] cs2000 : As for Secneo, we found a version that weren't patched (4.1.22), i beleive the older versions didnt have Secneo, but my memory is foggy, that was quite a while ago

[2019-07-02 11:30:20] b3019199 : Right

[2019-07-02 11:30:52] b3019199 : Do you know what the current state of SecNeo unpacking is?

[2019-07-02 11:31:10] b3019199 : What has been done/what hasn't etc.

[2019-07-02 11:31:53] cs2000 : plenty of people have tried, some of the best android RE guys in the scene, nobody has made any real dent into it

[2019-07-02 11:32:32] cs2000 : Im sure somewhere in the world, someone has done it. But that kind of service would be worth a LOT of money and would likely be kept secret :confused:

[2019-07-02 11:32:52] b3019199 : Have you gotten a hold of the original class files?

[2019-07-02 11:33:07] b3019199 : The ones that are packed I mean

[2019-07-02 11:33:41] cs2000 : Its not something ive been involved with. Youre best asking @bin4ry in the ~android_apk_patching channel :slightly_smiling_face:

[2019-07-02 11:34:03] b3019199 : All right :slightly_smiling_face: Thanks for all the help bud

[2019-07-02 11:34:09] cs2000 : np :slightly_smiling_face:

[2019-07-03 02:28:53] bobdole : <https://forum.xda-developers.com/android/software/mod-samsung-gear-360-manager-device-t3400383> :heart_eyes:

[2019-07-03 02:42:49] dronepilot : Tested out today M2 with SC boost 9km out, the quality on the range incredible. But the battery drains a little faster then in regular fcc.

[2019-07-03 02:42:55] dronepilot :

[2019-07-03 03:34:31] bjoneseying : I'd be more worried about it coming home at that range

[2019-07-03 04:32:40] bin4ry : :grin: my old work, quincy took over after i had no more interest in it :wink:

[2019-07-03 05:20:49] rickysuper : M2.use twin batteries will be perfect for Boost mode

[2019-07-03 05:30:45] bin4ry : which SC firmware are you running?

[2019-07-03 09:30:30] dronepilot : Arrived with 0% @bjoneseying

[2019-07-03 09:31:40] dronepilot : Yeah twin battery would be nice for a boost @rickysuper

[2019-07-03 09:32:20] dronepilot : Bird .200 and SC 530 @bin4ry

[2019-07-03 09:44:04] bjoneseying : You did better than Billy Boy whose mavic is swimming with the fishes

[2019-07-03 09:44:47] bjoneseying : <https://youtu.be/cymEAn1zPiQ>

[2019-07-03 10:08:13] dronepilot : Very nice 40 min of flight time it’s my goal @rickysuper

[2019-07-03 10:12:32] dronepilot : I have been out more then 10km out running only fcc with normal fcc @bjoneseying I seen Billy video on the day.

[2019-07-03 10:19:23] rickysuper : 12.5km was my friends's record with FCC and original RC no antenna mod

[2019-07-03 10:27:49] bjoneseying : yes need to be careful of wind

[2019-07-03 10:35:26] bjoneseying : I've been out 6.5km but over water and I dont feel like losing my drone so I conserve

[2019-07-03 10:35:35] bjoneseying : not even FCC here and had good signal

[2019-07-03 10:35:41] rickysuper : Yes, have to stop pushing the AC if Strong wind warning and motor power overload, may trigger auto land if ignore the warning.

[2019-07-03 10:36:11] dronepilot : That’s awesome, I’m thinking about backing up to fcc again. Loved boost but battery is mine concern.

[2019-07-03 10:36:46] rickysuper : FCC was enough unless strong interference.

[2019-07-03 10:36:53] bjoneseying : at this point battery because an inhibiting factor on occusync 2.0 whether boost, FCC or even CE

[2019-07-03 10:37:21] bjoneseying : you get a little bit of wind kick up and battery life plummets

[2019-07-03 10:38:37] dronepilot : Over water are nice long range flights, really love then. No need to fcc or boost.

[2019-07-03 10:45:15] bjoneseying : just check the weather before you head out, preferrably fly into wind etc

[2019-07-03 10:47:09] bjoneseying : stuff you probably already know

[2019-07-03 10:58:33] dronepilot : Yeah wind direction always keep my eyes on it, thanks for sharing.

[2019-07-03 11:01:05] bjoneseying : i might enable ATTI in place of Tripod mode since I never use it

[2019-07-03 11:01:24] bjoneseying : invaluable when you want to take the guess work out of wind speed/direction etc

[2019-07-03 11:03:17] bjoneseying : put the quad up to desired height, flick it into ATTI, let it drift and note the speed and direction it drifts for about 20sec or so

[2019-07-03 11:24:26] dronepilot : Correct i used to have atti over tipod place, but now i have started using tripod for some stuff around.

[2019-07-03 11:35:46] daviskat : Smart Controller FW 01.00.0530 is perfectly compatible with boost mode.

[2019-07-03 12:02:40] rickysuper : @bjoneseying how to manually trigger ATTI mode of M2 ? Thanks

[2019-07-03 12:14:39] cs2000 : Phew, glad that works!

[2019-07-03 17:31:59] quad808 : @rgf8aerial Dude....round trip....holy smokes thats a far range!!

[2019-07-03 18:03:40] dronepilot : Yep round trip, did screen recording the entire flight. Will upload to YouTube.

[2019-07-03 18:05:42] dronepilot : Anyone that want to follow me on instagram and YouTube look for Rubens Gallerani Filho. Have some nice long range on YouTube and cool pic on instagram.

[2019-07-03 18:56:44] bjoneseying : <https://youtu.be/rRE9_ydEWBY>

[2019-07-03 18:57:20] bjoneseying : Basically parameter mods with assistant 2 or possibly NLD App?

[2019-07-03 19:52:07] quad808 : HD signal the whole trip? Amazing!

[2019-07-03 20:15:04] dronepilot : Almost some times weak, but quick change.

[2019-07-03 20:53:06] bobdole : yeah the hd signal is pretty fantastic. that bird is singing

[2019-07-03 20:54:02] bobdole : it is almost as good as using a birdside amp

[2019-07-03 21:17:23] quad808 : Think about it...thats really impressive for range. Scary too, in a bad sort of way.....

[2019-07-03 21:54:55] dronepilot :

[2019-07-03 21:55:47] dronepilot : Flight log, soon will upload to mine YouTube channel the screen recording.

[2019-07-03 23:42:07] dronepilot : *my

[2019-07-04 00:30:06] bjoneseying : slight issue I found with the boost mod

[2019-07-04 00:30:43] bjoneseying : if paired with 2 RCs and you boot up with just secondary controller, the connection drops out constantly

[2019-07-04 00:36:05] bjoneseying : if I boot the main RC it stabilises in which case I can turn off the main RC and it will remain stable

[2019-07-04 00:36:51] bjoneseying : interesting message on the secondary screen about aircraft settings updates to comply with national regulations

[2019-07-04 01:28:10] rickysuper : Thanks @bjoneseying

[2019-07-04 02:01:16] bobdole : What firmware are you on?

[2019-07-04 03:27:40] bjoneseying : 530 SC, .200 on AC

[2019-07-04 03:28:13] bjoneseying : 400 on RC

[2019-07-04 04:59:28] bjoneseying : rolled back to FCC mode and it does the same thing, so I dont think its BOOST per se, quite possibly a bug in the firmware or FCC patch also?

[2019-07-04 05:26:59] bin4ry : has to be a bug in the firmware as the mode switch is done like the official mode switch is done . so just “forcing” djis implementation

[2019-07-04 05:27:46] bin4ry : maybe update AC to 400 and see how it behaves

[2019-07-04 08:39:41] bobdole : <https://dl.djicdn.com/downloads/Mavic_2/20190417/Mavic_2_Pro_Zoom_Release_Notes_en.pdf> Date: 2019.04.17 Aircraft Firmware: v01.00.04.00 ... What’s New?  Added Dual Remote Controller mode (

[2019-07-04 08:40:19] bobdole : i sentence you to 10 hours of billy kyle videos

[2019-07-04 09:41:45] makingthisnameup : Srsly. So glad you guys exist. Random thank you

[2019-07-04 11:37:52] bjoneseying : if I do that, it'll force updated NFZs on me, then I have to roll back to .100 and remove everything and then upgrade to 200 to get PL back again

[2019-07-06 03:03:43] dronepilot :

[2019-07-06 03:04:07] dronepilot : Here you go guys, SC + M2 = NLD Boost. Bird Firmware .200 and SC 530.

[2019-07-06 04:38:47] bjoneseying : I did a battery just then on boost + stock RC - Certainly had better range, I wouldnt go so far as to say triple, maybe 30-40% more, or perhaps lets me fly a little lower before interference from obstacles. I'm in non-FCC country

[2019-07-07 11:07:36] flymymavic : i sentence you to 10 hours of billy kyle videos, I would rather eat my own vomit

[2019-07-07 14:13:40] originaldobo007 : Or “Originaldobo”

[2019-07-07 19:56:47] bjoneseying : No love for Drone Valley? LOL

[2019-07-07 19:59:55] originaldobo007 : Oh, Good ol’ Rick from Shill Valley? That fucking turd who has his mouth so far up DJI’s asshole? :joy::rolling_on_the_floor_laughing: “Bill the Drone Reviewer’s” slightly less retarded cousin...

[2019-07-07 20:12:33] bjoneseying : Rick AKA Uncle Fester :smile:

[2019-07-07 20:24:21] originaldobo007 : I remember him shilling the Osmo Action: “The wizards at DJI have completely revolutionized action cameras!” What a fucking loser.

[2019-07-07 23:58:42] bjoneseying : to be fair, Dobo has mouthed off about Bill drone reviewer in the past, so probably one of the better youtubers

[2019-07-07 23:59:49] bjoneseying : But yes for Rick from shill-valley, used to be helpful maybe 2 years ago when it was more a hobby but got to the point where nothing but shilling for DJI now - so I dont watch those videos anymore

[2019-07-08 00:29:55] bjoneseying : you have to catch him during his live shows - he loses his shit at the drop of a hat :smile:

[2019-07-08 00:43:03] originaldobo007 : I’ll try catch that. The instability might be entertaining. He doesn’t seem to be able to pronounce words that end with “..ing”. And he seems to pronounce “Phantom” as “Fanthom”. :joy:

[2019-07-08 01:37:17] bobdole : @bjoneseying <https://youtu.be/r2vWrrh18sg>

[2019-07-08 01:38:49] bobdole : Sandmarc... Was scratching my head about cap video quality and eventually removed my sandmarc filter and the relief felt like the first poo after 1 week of constipation

[2019-07-08 01:43:15] bjoneseying : ??

[2019-07-08 01:46:22] bjoneseying : Unless DJI are releasing a new drone, I dont really watch their videos all that much TBH

[2019-07-08 17:54:05] originaldobo007 : Really? You aren't hugely impressed with such groundbreaking videos as this???? <https://www.youtube.com/watch?v=IYO0MjKYHc4>

[2019-07-08 19:37:07] bjoneseying : I had an aneurism as soon as I read the name :confounded:

[2019-07-11 06:22:54] daviskat : Does NLD support the M2 Enterprise aircraft?

[2019-07-11 07:34:42] daviskat : Just tested, nld does not support M2 Enterprise

[2019-07-11 07:38:15] daviskat : The firmware for the M2 and M2 Enterprise industry editions is different.

[2019-07-11 07:59:39] daviskat : But here again shows support for M2 Enterprise, who tested the successful connection?

[2019-07-11 09:41:22] cat.db : no ,it can not be .i have test it.

[2019-07-11 09:55:57] cantrepeat : I'll admit it, it was me. I was going to use the domain name to sell Russian Brides!!!

[2019-07-11 10:50:43] coldflake : lol

[2019-07-11 10:50:52] coldflake : Yes those Russian brides lol

[2019-07-11 10:51:14] coldflake : When we launch the new website, it will not be a Russian bride Kind tinder thing lol

[2019-07-11 11:00:11] cantrepeat : Damn, there goes my money maker idea!!

[2019-07-11 11:07:02] coldflake : So sorry mate lol

[2019-07-11 17:24:53] quad808 : bwahahahahaha

[2019-07-11 19:53:02] chipmangini : I would like a Russian Bride, but only for a night or ten....

[2019-07-11 19:56:28] cantrepeat : da, we have best russian honies for you to choose from!

[2019-07-11 19:57:08] cantrepeat : Do the users on slack from Russia even know about Russian Bride sales in the US? lol

[2019-07-11 19:58:44] chipmangini : In general, do these Russian Brides like drones, or just wacked out peeps that stay up all night on their computer with a beeping propeller spinning, light flashing device connected to their computers, without ever paying any attention to them until the firmware finally flashed, and THEN that get the true FIRMWARE????

[2019-07-11 19:58:57] chipmangini : Just wondering........

[2019-07-11 20:44:10] quad808 : I will take a couple...have lots of wadka at home...

[2019-07-12 21:40:45] cantrepeat : Wadka, drink of champions!!

[2019-07-12 21:41:13] originaldobo007 : Nostrovia!

[2019-07-12 21:48:14] cantrepeat : аплодисменты

[2019-07-13 00:11:38] nublish101 : ahh i see hwo to lsit them

[2019-07-13 00:11:41] nublish101 : well i feel dujmb

[2019-07-13 00:11:43] nublish101 : im new to slack

[2019-07-13 00:12:03] cantrepeat : no worries

[2019-07-13 00:12:13] cantrepeat : we were all new to slack at some point

[2019-07-13 00:33:22] quad808 : Not me. I am a born slacker. bwahahahaha

[2019-07-13 02:03:08] dronepilot : Hi guys big question. Tested out today Dji Go 4 vs Litchi running nld fcc the diference is big between the and the range and signal strength is big.

[2019-07-13 02:03:29] dronepilot : Equipment M2 and M1P

[2019-07-13 02:52:23] dronepilot : Big difference on the stability of the signal strength.

[2019-07-13 03:12:13] quad808 : I have no idea if there was a question in there somewhere.

[2019-07-13 03:12:22] quad808 : Help me look for it.

[2019-07-13 03:12:28] quad808 : !beer

[2019-07-13 05:31:24] bjoneseying : nearly

[2019-07-13 05:33:34] bjoneseying : I didnt find much improvement in FCC/Boost range over SRRC however it did allow me to fly a little lower. I guess whatever interference is out there is just too much for poor ol' mavic

[2019-07-13 05:33:52] bjoneseying : I'm sure it would be more prominent in an open field however

[2019-07-13 08:16:37] rickysuper : HK (CE) got huge difference in FCC mode even in urban area, 3-4K will lost signal if in CE. It can fly beyond 8K if in FCC, same route.

[2019-07-13 08:30:49] nublish101 : Hey is it possible to use nld and firmware 1.04.300 and then use super patcher to do altitude removeal

[2019-07-13 08:47:03] brett.e.burkhart : Yes

[2019-07-13 09:28:28] bjoneseying : Thought HK use SRRC

[2019-07-13 09:43:57] nublish101 : Sweet

[2019-07-13 09:44:18] nublish101 : Wasn't sure weather super patcher would work on nld for wares

[2019-07-13 11:39:26] nublish101 : @catalinaskirace curious do you need a battery in to nld?

[2019-07-13 11:39:40] nublish101 : Or will USB cable be enough

[2019-07-13 12:35:37] rickw001 : mavic has to be powered on to use nld

[2019-07-13 12:53:50] nublish101 : Well everything's changed just need to finish shopping get ca

[2019-07-13 12:54:06] nublish101 : Care refresh then nld

[2019-07-13 12:54:24] nublish101 : Charged*

[2019-07-13 12:58:13] coldflake : What feature would you guys most like to see released in the next NLD update?

[2019-07-13 13:03:25] cantrepeat : aeroscope defeat

[2019-07-13 13:04:56] cantrepeat : next would be ID chip tracking, you know the ones I plant in the Russian Brides! Would make it easy to return them to their husbands! LOFUCKINGL

[2019-07-13 13:16:55] fredmicrowave : 1- Altitude. Altitude ! 2-Higher firmware version support 3-Aeroscope Optionally, spoofing of Cantrepeat brides chips positions.

[2019-07-13 13:57:37] nublish101 : Flight log manipulation for warenty claims

[2019-07-13 14:06:07] originaldobo007 : Altitude and nfz unlock for most recent fw on M2

[2019-07-13 14:15:58] rickysuper : Altitude and nfz unlock for most recent fw on M2. x2 :smile:

[2019-07-13 15:10:13] nublish101 : Just to clarify if I update a brand new mavic pro platinum to latest firmware nld can revert right?

[2019-07-13 15:10:40] nublish101 : I'm just doing first time setup using official apps and shit and wanted to be sure

[2019-07-13 15:14:22] cantrepeat : First thing you should do is hook the drone to the PC and use NLD to unlock and activated it so you don't have to give any of your info to DJI

[2019-07-13 15:19:09] nublish101 : @catalinaskirace I want dji refresh though

[2019-07-13 15:19:26] nublish101 : And already activated

[2019-07-13 15:20:58] nublish101 : @catalinaskirace so yeah have to give them my shit unfortunately

[2019-07-13 15:21:23] nublish101 : But I'm only doing this acti sting care refresh maybe flying mod less for first flight then nlding this shit

[2019-07-13 15:32:44] nublish101 : Nld dosent like Windows 7

[2019-07-13 15:36:12] nublish101 : @catalinaskirace @nocommie @quad808 erm problem

[2019-07-13 15:36:55] nublish101 : But site says compatible

[2019-07-13 15:38:21] fredmicrowave : If that's for a M2, you have to rollback to 01.0.0100

[2019-07-13 15:38:24] nublish101 :

[2019-07-13 15:38:37] nublish101 : No mpp

[2019-07-13 15:38:47] fredmicrowave : Ok ok

[2019-07-13 15:38:58] nublish101 : Fix?

[2019-07-13 15:39:16] nublish101 : Should I reflash using nld

[2019-07-13 15:39:58] nublish101 : @fredmicrowave

[2019-07-13 15:40:48] fredmicrowave : I don't know what ot say.

[2019-07-13 15:41:22] fredmicrowave : Restart everything, disable antivirus and firewall, start in admin mode....

[2019-07-13 15:41:40] nublish101 : I'm running Windows 7 on this laptop

[2019-07-13 15:42:32] fredmicrowave : Im on win7 too, and nls has been working fine with M2

[2019-07-13 15:42:39] fredmicrowave : NLD

[2019-07-13 16:02:58] nublish101 : Okay I got some wierdness

[2019-07-13 16:03:28] nublish101 : Dron restarted once this hit 100% but it seem like it didn't fully. Revonnect

[2019-07-13 16:18:55] nublish101 :

[2019-07-13 17:29:23] quad808 : Restart NLD

[2019-07-13 21:26:32] lolo780 : Nobody likes windows 7

[2019-07-13 21:29:43] nublish101 : heh its a core2duo windcows 7 is piushign my luck i really hsoudl be runnign xp on it

[2019-07-13 22:33:32] dronepilot : I would like to see M2 NFZ .200 + fw and altitude bypass. @coldflake

[2019-07-13 22:54:41] lolo780 : NFZ on newer firmware would be realistic. If you like heights, M1 or P4P.

[2019-07-14 00:17:46] fredmicrowave : It sucks to be realistic.

[2019-07-14 00:22:56] dronepilot : Nice @lowellfoo780 good that i have backup, but would be great to have nfz .200 + on the M2.

[2019-07-14 01:29:22] originaldobo007 : Fair enough. At least NFZ on later fw

[2019-07-14 03:04:41] bjoneseying : I suspect some exploit was found on .200 FW since DJI has removed it

[2019-07-14 03:05:34] bjoneseying : whether the exploit is known is another story however

[2019-07-14 10:24:49] nopcode : hey, short question: how much boost is safe on the M2 without frying electronics and affecting battery life too much?

[2019-07-14 10:25:14] nopcode : what power is normal FCC, 250mW?

[2019-07-14 10:31:12] nopcode : ah, 400mW apparently would be FCC

[2019-07-14 10:35:12] nopcode : oh it's fixed at 1.8W hm

[2019-07-14 12:14:04] nublish101 : I have a feeling fcc boost isn't working on my. Mavic pro platinum it says the it isn't support on firmware 1.04.0300 in app. But also says it on by default because of the nld apk

[2019-07-14 12:14:25] nublish101 : But I only managed a max range flight of about 2200 meters

[2019-07-14 12:14:35] nublish101 : With clear line of sight

[2019-07-14 12:15:02] nublish101 : At 2200 I had to turn round and fly back as vidoe. Had just completely gone

[2019-07-14 12:51:45] nublish101 : @coldflake possibly an options for different uniot os mesure ment like imperial metreic ect as id like to see say speed in mph rathert than meters

[2019-07-14 12:53:23] rickw001 : select imperial in go4 app,you need to do more reading instead of playing with your new toy

[2019-07-14 12:53:39] nublish101 : im talking for adjusting perameters in nld

[2019-07-14 12:53:44] nublish101 : not in go 4

[2019-07-14 12:53:50] nublish101 : go 4 is alreayd set how i like

[2019-07-14 13:21:14] coldflake : @nublish101 That is a good idea. I am from a metric system country so never thought about it but it's obviously a good idea

[2019-07-14 13:21:24] coldflake : I will put it on our development road map

[2019-07-14 14:15:17] nublish101 : Erm can anyone figure out a way to sign into YouTube using the nld app

[2019-07-14 14:15:34] nublish101 : I get a 404 error on the link it sends. To sign you in

[2019-07-14 14:17:13] nublish101 : Sorry error 400 url redirect mismatch

[2019-07-14 14:17:32] nublish101 : Is it poasi le to sign into YouTube using official app and the. Linking that with nld app

[2019-07-14 14:51:55] nublish101 : @coldflake also only just noticed your reply no problem man just an idea i was heaving wqhiel i was sat stewarting at meters oper second and been like and that is whjat in mph lol

[2019-07-14 15:01:35] nublish101 : @coldflake could oyu see if you can fix the live streqamign stuff in nld's patched apk

[2019-07-14 15:01:48] nublish101 : as id fuckign kill to be abel to Facebook/youtube stream my shit

[2019-07-14 15:12:25] cantrepeat : What device are you using to stream?

[2019-07-14 15:28:23] bin4ry : many of this shit logins where removed on purpose for privacy reasons. can’t remember for youtube/facebook etc. but you are the first person ever that i hear complaining about that :joy: so either it should work or you are the only person needing it. not sure sorry :man-shrugging:

[2019-07-14 15:40:17] nublish101 : Android

[2019-07-14 15:40:46] nublish101 : Also I flashed jkson and now I'm getting signal drop like a shit cunt

[2019-07-14 16:04:20] originaldobo007 : What’s a “shit cunt”?

[2019-07-14 16:10:20] fredmicrowave : <https://www.youtube.com/watch?v=ErgOQO73ZOE>

[2019-07-14 16:39:44] cantrepeat : lol if you pass to the right, you're a shitcunt!!

[2019-07-14 16:43:24] nublish101 : So we'll that was awkward

[2019-07-14 16:44:39] nublish101 : Had a crash drone landed upside down and pushed the controll sticks. Out and did nothing had to pull the battery while it was upside down cause it was drying to spin the props when one of the arms had folded

[2019-07-14 16:48:55] cantrepeat : Pro tip, don't crash!!

[2019-07-14 16:49:55] nublish101 : Yeah did intend to sensors decided that it didn't see a tree when it was rth when it lost signal

[2019-07-14 16:51:04] nublish101 : Also dose anyone have an issue where they try to select HD mode and it just Co tinuously selects regular on transmission settings screen

[2019-07-14 21:01:32] nublish101 : hey if its at all possible an ability to be able to set the rth height below 20m would also be super usefull for me

[2019-07-14 21:02:07] nublish101 : as i do soem forest flying and had an inncident today wher it decide to try rthing cause bad fcc boost and it hit the canopy

[2019-07-15 02:52:55] rainer.kerncn : @coldflake 1 - Higher Firmware / 2 - Altitude Removal / 3 - Switch in NDL to change easily between Tripod & ATTI mode /

[2019-07-15 08:45:10] bjoneseying : Change your signal lost behaviour to hover if flying under trees

[2019-07-15 09:09:37] nublish101 : Humm. I didn't see anything for that I'll check aagin today :)

[2019-07-15 09:11:25] nublish101 : My cure nt issue is I'm running jksons fcc+boost loop patch the one where you can change it but yeah I'm having issue where its losing signal worse tha. It did before patching

[2019-07-15 09:47:32] cat.db : jksons's fcc patch It is not very stable and often disappears easily on mavic pro .don't know why .

[2019-07-15 10:17:18] nublish101 : It's the one everyone told me to use :s

[2019-07-15 10:19:33] nublish101 : @orangeclassmate is there as another method you'd suggest I just like the idea of the loop selector but I am curious does the 1.5W boost cause much more battery usage/stress on radio chipset

[2019-07-15 11:55:08] dronepilot : @nublish101 using jkson patch fcc worked the best for me. The boost didn’t really liked it.

[2019-07-15 12:08:56] dronepilot :

[2019-07-15 12:11:18] dronepilot : This was yesterday flight M1 only fcc 2.4ghz.

[2019-07-15 12:16:40] cantrepeat : shit music is shit!!!

[2019-07-15 14:41:21] bobdole : Yeah.. Ugly Shrek references, horribad autotune, more whiny than emo,

[2019-07-15 14:42:20] bobdole : Is this trap music?

[2019-07-15 15:27:51] dronepilot : hahaha guys don’t judge the music didn’t have anything else at the moment to upload rather than that. Bye the way thanks for the nicely comments next music will be better.

[2019-07-16 11:57:46] trollspeed : Any progress gonna be implemented for Air?

[2019-07-16 16:48:17] nublish101 : erm so i think i may have foudn a bug with the 1.,04.0300 firmware from nld

[2019-07-16 16:48:29] nublish101 : if im runnign that firmwqare with the nfz patch enabled

[2019-07-16 16:49:01] nublish101 : and nto sur eif it is the same without the nfz patch but either way my scario is that firmware with nfz patch and altitude removed tidcked

[2019-07-16 16:49:12] nublish101 : but i cannot change exp in go app

[2019-07-16 17:48:12] bin4ry : can you maybe try to write a bit better? it’s really hard to read your text (especially for a non native speaker). still to answer your question, the firmware from nld and dji is the same. is the problem also there without the nfz patch? the patch doesn’t touch this parts so it might be firmware related

[2019-07-16 18:01:34] quad808 : @nublish101 There is a error in NLD, in that you should NOT be able to click the altitude disable box when you are on 01.04.0300. it does nothing. You would need to be on 01.03.0700 firmware for that check box to work

[2019-07-17 01:13:36] dronepilot : Little feedback for you guys boost patch on the M2 with the SC makes a huge difference compared over fcc.

[2019-07-17 01:26:14] originaldobo007 : Going to Iceland in a bit more than a month and looking fwd to using my boost mode there.

[2019-07-17 02:03:51] dronepilot : Go for it @originaldobo007 it’s amazing.

[2019-07-17 13:23:58] flymymavic : @nublish101 Live stream won’t work on the modded version from what I can work out Facebook changed the protocol to RMTPS from RMTP, unless someone can hack the later app version it won’t work. Unless you could just change the FB section in some way

[2019-07-17 17:15:53] coldflake : @originaldobo007 Be careful with shifting weeather in Iceland! Tourists often get into trouble in Iceland because they do not understand how extreme Icelandic weather really is

[2019-07-17 17:16:39] coldflake : You can take off in absolutely beautiful weather and 5 mins later you have a fucking hurricane

[2019-07-17 17:16:58] coldflake : I have almost lost a few birds there that way

[2019-07-17 17:17:28] coldflake : I had to do a midair power off on my P4 to use gravity to get it back lol

[2019-07-17 17:17:45] coldflake : It broke the legs and I had to replace the shell

[2019-07-17 17:18:15] coldflake : It was simply impossible to get it down fast enough as It got carried away with strong winds

[2019-07-17 17:18:32] coldflake : Craaaazy

[2019-07-17 17:34:05] originaldobo007 : Fuck! I was reading about that. I will be careful as shit. I’ll try and share some footage here after I get back (if I don’t lose my bird). I won’t do any crazy long distance shit.

[2019-07-17 17:35:56] originaldobo007 : I’ll be there the last week of August.

[2019-07-17 17:36:15] originaldobo007 : Any recommendations of places to get good drone footage there are welcomed.

[2019-07-17 20:19:58] andrwho25 : coldflake: can we see the footage of that :smile:

[2019-07-17 20:34:40] andrwho25 : @pabloiarriola: have you tried going through the support channels rather than pinging them directly?

[2019-07-17 21:59:04] bjoneseying : Fly an Evo next time - apparently flying into the ground isn't a bug, it's a feature!

[2019-07-18 00:22:55] nublish101 : @coldflake yeahc iceland is scotland x3

[2019-07-18 00:23:26] nublish101 : like i litterally went for walks in the cairngorm moutains glorious summers day wetaher report says glorious 30*c day all day

[2019-07-18 00:26:28] nublish101 : first hour of walk fine and for the first time ever i didnt pack my rucksak for all eventualitys **big mistake** in the space of half an hour i experiance every posible weather codition you could from blazing heat no humidity to blazing heat 200% humidity(if thats even a thing it was fuckign sticky) to Terential rain to complete white out with 80mph wind with 130mph gusts back to blazing heat all happened within 30-45mins fuckign weather this far up north gets fuckign weird

[2019-07-18 00:27:21] nublish101 : like peopel ignore all the locals warnign abotu if your walkign int he moutaisn pack for every weather you can think about peopole ignore it cause why woudl i need ot pack all that weight and situation like that are why

[2019-07-18 00:29:10] nublish101 : i was lucky i didnt p[ack for everythign but i took a water proof wiht me and i knew where all the bothy's were so as soon as i felt the wind pick up and the codl front i belined for a bothy and sat it out with a nice little fire

[2019-07-18 00:29:55] nublish101 : best adviuce i can give to anyone is try map out all the bothys aroudn the areas where you are walkign in northern england and scotland they will save your life

[2019-07-18 01:05:42] nublish101 : @originaldobo007 i would have recomended givign this guy a call if he hadent passed away this year <https://www.theyet.org/2019/05/dick-phillips/> He prertty much pioneered walking and cycling tours of iceland hed have been able to give you a ton of advice oyu maybe ablke to find infomation of his tours and where he recomended to go online

[2019-07-18 02:29:14] originaldobo007 : Thanks man!

[2019-07-18 03:13:56] nublish101 : @originaldobo007 no bother fella hope oyu can fidn info on his tours i couldnt find much with a quick google

[2019-07-18 03:14:00] nublish101 : but im sure there soemthing

[2019-07-18 08:05:43] coldflake : yes, those extreme weather conditions could easily end up costing a bird or two :slightly_smiling_face:

[2019-07-18 11:50:25] cantrepeat : can we apply the boost mode to an FC Patched 01.04.0300 ??

[2019-07-18 11:52:16] cantrepeat : oh wait, SIGNAL boost is just for M2

[2019-07-18 15:26:37] coldflake : yes that is correct currently only for m2

[2019-07-18 15:26:48] coldflake : however we will release it for the older birds very soon

[2019-07-18 15:26:58] coldflake : and yes then you will be able to use it with FC ba

[2019-07-18 15:27:01] coldflake : patched

[2019-07-18 15:27:15] coldflake : but...soon you will not even need FC patcher AT ALL

[2019-07-18 15:27:28] coldflake : just latest stock firmware and go go

[2019-07-18 15:54:50] originaldobo007 : @coldflake - you tease! :stuck_out_tongue_winking_eye:

[2019-07-18 16:41:28] ki4gyw : Any news on the m210 support?

[2019-07-18 17:31:25] quad808 : @catalinaskirace the signal boost PATCH is only for the M2, for the others...Mavic - P4, use NLD GO 4.1.22...you can enable boost and 32chann mode (for P4) via the json file, and FCC mode is on by default.

[2019-07-18 18:03:22] originaldobo007 : @quad808 @coldflake any chance of the next NLD upgrade providing a Russian bride for a month or 2 as part of the upgrade process?

[2019-07-18 18:06:49] quad808 : :stuck_out_tongue_closed_eyes: Sorry, mine is taken.

[2019-07-18 18:16:10] coldflake : @ki4gyw M200 is being implemented now

[2019-07-18 22:21:41] nublish101 : so yeah

[2019-07-18 22:21:44] nublish101 : sports +

[2019-07-18 22:21:48] nublish101 : loittle to mcuh jucie

[2019-07-18 22:22:00] nublish101 : fun but jkidn awkard when your flyign in twilight

[2019-07-18 22:22:01] nublish101 : lol

[2019-07-18 22:22:16] nublish101 : was thinkgin oh fuck i makign a care refresh claim inb less than a week

[2019-07-18 22:22:27] nublish101 : took out 4 props and got the gimble shakign erro

[2019-07-18 22:22:34] nublish101 : the pwore of google saved me though i think

[2019-07-19 00:53:04] bobdole : Can you post a picture of your fingers?

[2019-07-19 08:30:27] nublish101 : It's not so much a fingers issue except on touch screens

[2019-07-19 08:33:50] nublish101 : It's a hand eye coordination thing if I look at the keyboard I type like a headless chicken and I hit enter and forget to proof read now ironicly if I don't look at the keyboard and I calibrate my position correctly I don't even need to look at the screen I am typing on a d can type find minus the od dyslexia induced mistake also I have next to graps of grammar so that is one annoying thing I am pretty much grammacaly inept

[2019-07-19 11:19:34] the_lord : hello guys, My friend was trying to contact NLD support to buy bulk NLD licenses but he didn't get any response !! can you please guide me how to get bulk licenses ??

[2019-07-19 11:56:10] cat.db : the active key will send to your email,you can find in your own nld account also.

[2019-07-19 11:56:18] cat.db : @the_lord

[2019-07-19 12:03:00] the_lord : Thanks @orangeclassmate but maybe I didn’t make myself clear A friend of mine sent email to NLD support to get discount for 50+ licenses and he didn’t get reply.

[2019-07-19 12:15:39] cat.db : hahaha,mabe you need to wait, they reply the ticket normaly need 24h .

[2019-07-19 14:23:22] cantrepeat : I believe all the DEVs are on the private DEV island doing the annual cocaine and hookers extravaganza this weekend.

[2019-07-19 14:24:22] cantrepeat : I tried to get an invite this year but apparently hookers > russian brides! :smile:

[2019-07-19 16:15:59] bin4ry : @the_lord let’s get @coldflake look into it!

[2019-07-19 16:31:38] originaldobo007 : The “Hooker and Blow Weekend” was now?? Fuck. I should have begged for an invite.

[2019-07-19 16:51:45] quad808 : hey @the_lord I probably saw that request on support and escalated the request without replying. Your friend will get a response, guaranteed.

[2019-07-19 17:27:33] the_lord : @bin4ry @quad808 thanks guys

[2019-07-26 13:30:01] daviskat : The M2 0400 firmware flashes 0100 firmware and stays at 15%. checked the firmware modules MD5. Rolling back 0100 firmware with dumldore also failed.

[2019-07-26 13:37:54] daviskat : If you update to the latest firmware with DJI assistant2 today, is it the same problem?

[2019-07-26 17:30:01] quad808 : Whenever you get stuck at 15% with NLD, it is network related. NLD does a MD5 check on the modules and needs to contact our server to verify the info. If the connection gets blocked, it times out and the process is stalled. Fix the block, all good. Well...that was before the anti-roll back. !DJI bitches

[2019-07-27 01:05:14] bobdole : now where did i get that idea...... :wink:

[2019-07-27 01:26:58] jackmax : @quad808 Dumldore can't roll back too， it's not a network problem.

[2019-07-27 01:27:52] bobdole : @pcp20160520 he knows. NLD just sent out a headsup to everyone

[2019-07-27 01:29:42] bobdole : and they're still calling it v01.00.0400???

[2019-07-27 01:29:45] bobdole : that is shady

[2019-07-27 01:31:23] bobdole : well they sent me a new mavic 2 pro that came with v01.00.0400 yesterday manufacture date 6/2019 and it was not the anti-rollback v01.00.0400 so this must be pretty new

[2019-07-27 02:45:26] bjoneseying : DJI Being shady? Say it aint so :slightly_smiling_face:

[2019-07-27 06:03:53] originaldobo007 : Well- I guess the only alternative is to fully unlock alt/nfz/parameters in the latest fw then.

[2019-07-27 06:04:12] originaldobo007 : Making their anti-rollback stuff completely obsolete.

[2019-07-27 06:04:19] originaldobo007 : And pointless.

[2019-07-27 06:04:52] originaldobo007 : The amount of time DJI spends wasting resources on cat and mouse like this instead of improving their customer service, etc is astounding.

[2019-07-27 07:41:02] bin4ry : @pcp20160520 and everyone else ofc. did you try to reflash 400 with NLD. please do try it.

[2019-07-27 09:28:22] coldflake : We would like very much to see the result of the suggested reflash method

[2019-07-27 17:57:27] quad808 : DJI put the anti-roll back silently in .0400 AND .0300

[2019-07-27 19:33:30] bobdole : but not pushing through the app?

[2019-07-28 00:47:47] quad808 : Only if you upgrade through the GO app.

[2019-07-28 06:41:16] nublish101 : so

[2019-07-28 06:41:39] nublish101 : im tyrignt o see if i can figure otu hwot o stop the iosd version of DJI GO talkignt o home if possible

[2019-07-28 06:42:03] nublish101 : but ive managed to decrypt the latest dji go 4 for ios if an yone fancies havign a play aroudn with it

[2019-07-28 06:42:54] nublish101 : and im tinkerign with tryign to decrypt the latest android version but yeah secneo is deffinitely not something im int he mood to hack throguh with this weather heh

[2019-07-28 08:00:43] brett.e.burkhart : really theres no difference between the available frida's and the latest one. Frankly the best version of DJI Go 4 is 4.0.8 for iOS

[2019-07-29 01:56:32] ki4gyw : @coldflake any idea on the 210 unlocks. for some reason today I couldnt unlock and fly in a enhanced warning zone. But the dual did perfectly. Go figure.

[2019-07-29 02:27:50] dronepilot : SP works on Win 7?

[2019-07-29 09:58:59] coldflake : @ki4gyw Can you be more specific plz?

[2019-07-29 13:29:38] ki4gyw : Ready to rip the NFZ out totally. I was at the local airport and have flown several times and even used my dual minutes before. The 210 would not let me self unlock changed accounts gave the chicoms guys a phone number verified it and still no go. Cleared app cache and everything on the latest pilot.

[2019-08-01 11:08:25] dronepilot : Question how can i disable boost on the M2 and keep only fcc mode?

[2019-08-01 11:11:36] pross : Pretty sure this has been asked before, if i remember right you just need to click the FCC patch button ..

[2019-08-01 11:12:30] pross : It can only be one or the other … fcc mode tricks it into being in the US so you get 0.4w .. boost mode makes it 1.5w .. you cant be both.

[2019-08-01 11:36:45] nublish101 : Eek ima gun a flash stock firmware and use a proper dji go for a week and have an incident again

[2019-08-01 11:37:16] nublish101 : Been flying with that monster crack. In my. Drone for about 2 weeks

[2019-08-01 11:37:24] nublish101 : And only. Just noticed it

[2019-08-01 12:11:50] dronepilot : @pross thanks really appreciate.

[2019-08-01 13:27:50] dronepilot : Hey guys i have nld fcc only and goggles re just find out that has a menu on the goggles but doesn’t show the fcc line only on the sc.

[2019-08-01 13:31:12] dronepilot : How to change to fcc the goggles any way out?

[2019-08-02 02:31:49] bjoneseying : I think the NLD FCC is bird side

[2019-08-02 02:32:17] bjoneseying : So fly out and see if they maintain connection when the RC does

[2019-08-02 20:00:03] quad808 : You would have to use your device running NLD GO, connect first to the bird, so that is forces FCC mode, then use the goggles. I have not tried this myself, but this works also if you wanted to use iOS GO....connect up with NLD GO on Android, get everything connected, then unplug usb to device, and plug in device with iOS GO. It will keep FCC mode for that flight.

[2019-08-02 22:35:53] cantrepeat : It's Friday and no one bitching about a late release!!! lol

[2019-08-02 22:38:35] pross : friday release? thats brave lol

[2019-08-03 00:37:32] bjoneseying : Saturday here

[2019-08-03 00:38:18] bjoneseying : Had a nice early morning flight with the M2P on boost catching the sunrise, it was nice

[2019-08-03 01:59:42] dronepilot : @quad808 thanks will give a try, the issue is that i have the sc.

[2019-08-03 02:10:49] dronepilot : I think that the goggles bind directly to the drone it doesn’t need the RC to work when powered on.

[2019-08-03 08:42:24] yihuasteven : if i want to cancel the fixed fcc mode or the signal boost on m2, what shall i do? Currently i did not find buttons to do that. Shall I re-flash the firmware?

[2019-08-03 10:56:13] dronepilot : I did a firmware upgrade from .200 to .300 and everything backed to factory. I was trying to ré flash but dji removed the firmware am happy on .300 now M2.

[2019-08-03 11:55:53] tommiboost : Trying to flash back to .700 and it's stuck at 82% what do I need to do

[2019-08-03 12:09:57] tommiboost : Sorted had to restart nld

[2019-08-03 12:40:39] cantrepeat : Why are you flashing a Mavic back to .700 ??

[2019-08-03 15:48:42] bobdole : old info on internet probably.

[2019-08-04 06:56:41] tommiboost : To get rid of altitude limit

[2019-08-04 11:15:39] cantrepeat : You can remove altitude limit with FC Patcher and FW 01.04.0300

[2019-08-04 12:08:46] bin4ry : and soon with nld directly :wink: we roll our NLD fc very soon. so you don’t even have to use super patcher, can’t get any easier then

[2019-08-04 12:12:29] d95gas : Hi Bin4ry .... Long time no speak :slightly_smiling_face: how soon is "soon".... Only reason I ask is that the MP has not been touched since getting the Anafi, This week I need to get back onto the MP ..... Still on its original firmware of 01.03.0400 :disappointed:

[2019-08-04 12:44:38] bin4ry : soon :joy:

[2019-08-04 12:45:42] d95gas : :+1:

[2019-08-04 13:27:05] tommiboost : I'll wait for nld

[2019-08-04 19:14:29] cantrepeat : Soon™

[2019-08-04 19:22:11] weprul0r : I got a notification for a DJI GO 4 app update to 4.3.24 (not in Play Store yet). Can I safely update and keep FCC patched (Mavic 2)?

[2019-08-04 19:25:14] weprul0r : I know, that FCC was patched on the drone directly, but hey - it's DJI :smile:

[2019-08-05 02:24:51] quad808 : I woudn't trust ANY DJI updates now. Let someone else test it first.

[2019-08-05 09:35:40] weprul0r : Ok, thanks. I wait then.

[2019-08-05 09:36:12] weprul0r : Installed app doesn't have any issues for me, so it doesn't matter currently.

[2019-08-07 19:11:45] guson : Anyone tried 4.3.24 yet and mp2 fcc ?

[2019-08-09 09:45:53] flymymavic : I wouldn’t trust DJI they are sneaky enough to put modding restrictions in an app

[2019-08-10 23:38:20] cantrepeat : how many srtm_data files can 4.1.22 read from the datalink json file? The instructions says up to 4? so this is ok {"m_AlgoChoice":3,"m_AlgoParams":[30.0,5.0,15.0,3.0,50.0,20.0,3500.0],"m_AltitudeOffset":0.0,"m_DTM_tiles_paths":["/mnt/sdcard/DJI/srtm_data/N30W086.SRTMGL1.hgt.zip","/mnt/sdcard/DJI/srtm_data/N32W085.SRTMGL1.hgt.zip","/mnt/sdcard/DJI/srtm_data/N32W086.SRTMGL1.hgt.zip","/mnt/sdcard/DJI/srtm_data/N32W087.SRTMGL1.hgt.zip"],"m_DoLogging":false}

[2019-08-10 23:38:28] cantrepeat : or is it limited to 2 tiles?

[2019-08-11 10:20:23] cantrepeat : My question comes from two parts of the howto on NLD

[2019-08-11 10:20:32] cantrepeat : first - Only replace the names of the two that are there and leave the rest of the text alone.

[2019-08-11 10:21:03] cantrepeat : but then at the bottom I see - You can have up to 4 tiles listed at a time in this file.

[2019-08-11 16:43:12] brett.e.burkhart : I notice that NLD desktop app has adb built into it. Does installing NLD desktop app also install the necessary adb driver on say a Windows 7 or 8 machine that does not have adb drivers for DJI products system wide? Or does it only work for the NLD app?

[2019-08-11 18:27:03] quad808 : You run NLD, not really an install, per se. @catalinaskirace you can replace the 2 in the example and have up to 4 tiles loaded, max.

[2019-08-11 18:30:10] quad808 : {"m_AlgoChoice":3,"m_AlgoParams":[30.0,5.0,15.0,3.0,50.0,20.0,3500.0],"m_AltitudeOffset":0.0,"m_DTM_tiles_paths":["/mnt/sdcard/DJI/srtm_data/N35W116.SRTMGL1.hgt.zip","/mnt/sdcard/DJI/srtm_data/N35W117.SRTMGL1.hgt.zip","/mnt/sdcard/DJI/srtm_data/N36W116.SRTMGL1.hgt.zip","/mnt/sdcard/DJI/srtm_data/N36W117.SRTMGL1.hgt.zip"],"m_DoLogging":false} Example of 4 loaded tiles

[2019-08-11 18:31:08] quad808 : @brett.e.burkhart Most problems with NLD on Win7/8 is Windows not having the correct device drivers, not ADB.

[2019-08-11 19:34:53] cantrepeat : @quad808 yeah, that's how I've had it set up but hadn't looked at any of the files in while.

[2019-08-11 19:56:33] cantrepeat : I've got a friend coming out from Calif and wants to fly so I'm trying to get my knowledge put back together after a 7 month lay off.

[2019-08-12 12:17:55] cantrepeat : If I was dumb enough not to read the warnings and flashed M2 boost to a MPP how fucked am I???? LOFUCKINGL

[2019-08-12 12:18:34] cantrepeat : For a guy that thinks he's on top of the russian bride game I do some dumb shit now and then.

[2019-08-12 12:19:45] cs2000 : :joy: difficult question to answer seeing as ive never done it, but you should be fine, it would likely have failed as the same "patch" wont work on MP1 and MP2 without some alterations (im trying to work out **how** NLD let you do that though...)

[2019-08-12 12:21:45] cantrepeat : maybe because I'm on FC patcher? Dunno, but I'm just gonna flash stock .4.0300 and then back to my custom.

[2019-08-12 12:21:58] cs2000 : That would be my suggestion :slightly_smiling_face:

[2019-08-12 12:22:05] cantrepeat : this is what happens when you don't fly for 7 months

[2019-08-12 12:22:24] cs2000 : at least you didnt flash the wrong firmware or something catastrophic

[2019-08-12 12:25:34] cantrepeat : well, it's still early, let's see if I can manage to fuck something up real good like!

[2019-08-12 12:30:42] cantrepeat : NLD 1.9.3 hanging at 96% flasing 01.00.01.07 NFZ.DB this is my first time using this version of NLD

[2019-08-12 12:39:34] cantrepeat : ok so in checking the signal boost, there is a big red warning about it not being compatible with the MPP on .0300. The FCC check box is grayed out but the boost is clickable.

[2019-08-12 12:40:36] cantrepeat : you cant slide the adjustment on it but you can click the button.

[2019-08-12 12:42:00] cantrepeat :

[2019-08-12 12:42:58] cs2000 : Weird, and it actually does something if you click it?

[2019-08-12 12:44:23] cantrepeat : yeah actually does some work

[2019-08-12 12:44:36] cantrepeat : even said complete

[2019-08-12 12:44:55] cantrepeat : not going to do it a second time, lol

[2019-08-12 12:54:32] cantrepeat : DUMLdore is hanging at 96% now too. doh!

[2019-08-12 12:55:20] cantrepeat : gonna see if it connects to the controller

[2019-08-12 13:11:01] cantrepeat : no connect

[2019-08-12 13:14:03] cs2000 : Hmm, if its not connecting, then its busy doing something. COuld just be flashing.

[2019-08-12 13:14:21] cs2000 : Try firing up NLD and connect the drone to the PC, do you get taken to a firmware window with progress?

[2019-08-12 14:04:01] cantrepeat : yeah starting NLD back up and it goes straight to 96% trying to flash NFZ.DB to 01.00.01.07

[2019-08-12 14:05:00] cs2000 : Hmmmm, Well, its been a while, try rebooting the drone, connect it back up and see what it shows.

[2019-08-12 14:05:22] cs2000 : Signal boost patch, wrong drone or not, shouldn't cause issues flashing the NFZ database

[2019-08-12 14:15:23] cantrepeat : yeah after reboot goes back to 96%

[2019-08-12 14:19:55] cantrepeat : guess I'll let it run for 30 minutes and see what happens

[2019-08-12 16:37:04] bin4ry : boost button does a check before, if incompatible it doesn't run through

[2019-08-12 16:37:08] bin4ry : same as fcc

[2019-08-12 16:37:15] bin4ry : so no worries there

[2019-08-12 16:39:13] cantrepeat : even if rooted?

[2019-08-12 16:39:56] cantrepeat : when I try to flash anything it hangs at 96% and when I try to fly it says firmware mismatch and wont spin up

[2019-08-12 16:40:10] bin4ry : yes even if rooted

[2019-08-12 16:40:22] bin4ry : we check for different files if present and how etc etc

[2019-08-12 16:40:27] bin4ry : before changing filesystem

[2019-08-12 16:40:34] bin4ry : so it may have acted but that was the checks

[2019-08-12 16:41:16] bin4ry : have you checked if your nfz files are still in place ?

[2019-08-12 16:41:33] bin4ry : i have no idea what you have done before

[2019-08-12 16:41:37] cantrepeat : I stage2.bin them a while back

[2019-08-12 16:41:48] bin4ry : i see

[2019-08-12 16:41:58] cantrepeat : FC patcher and stage2.bin and flying with NLD 4.1.22

[2019-08-12 16:42:14] bin4ry : fc patcher

[2019-08-12 16:42:17] cantrepeat : then like an idiot click the boost button before reading.

[2019-08-12 16:42:20] bin4ry : did you modify dji_verify for it ?

[2019-08-12 16:42:31] bin4ry : boost button doesnt work for your drone

[2019-08-12 16:42:34] bin4ry : so it doesnt do anything

[2019-08-12 16:42:45] bin4ry : except connecting and checking if the user is an idiot

[2019-08-12 16:42:48] bin4ry : :smile:

[2019-08-12 16:42:49] bin4ry : failsafe

[2019-08-12 16:42:49] cantrepeat : no, just did the normal param changes and reflashed. it has been working for a while like that

[2019-08-12 16:44:00] cantrepeat : bird is still rooted so hopefully I can figure it out and get a fix going

[2019-08-12 16:44:06] bin4ry : hm

[2019-08-12 16:44:13] bin4ry : so for fc_patcher you installed dummy verify

[2019-08-12 16:44:18] cantrepeat : yes

[2019-08-12 16:44:53] bin4ry : so if you do i am not sure anymore but i think the -o option gets hijacked

[2019-08-12 16:45:02] bin4ry : so an image can't be decrypted ?!

[2019-08-12 16:45:07] bin4ry : i honestly forgot

[2019-08-12 16:45:21] bin4ry : but i would try to restore the original dji_verify first

[2019-08-12 16:45:45] bin4ry : or how was dummy_verify coded ?

[2019-08-12 16:46:15] bin4ry : do you have your original dji_verify copy in place ? :slightly_smiling_face:

[2019-08-12 16:46:27] bin4ry : cause this sounds to me like a verify issue

[2019-08-12 16:48:41] bin4ry : ?

[2019-08-12 16:52:00] cantrepeat : sorry someone at the door

[2019-08-12 16:52:12] cantrepeat : I'll have to check but I think I made a back up

[2019-08-12 16:55:58] cantrepeat : I think there is a tool to decrypt in fcpatcher, but it's been a long time since I've used it

[2019-08-12 16:56:23] bin4ry : dunno

[2019-08-12 16:56:33] bin4ry : i would restore stock first before moving forward

[2019-08-12 16:56:47] bin4ry : and iirc fc patcher uses dummy_verify instead of dji_verify

[2019-08-12 16:56:58] bin4ry : so put back dji_verify in place before moving forward

[2019-08-12 16:57:11] bin4ry : dunno what you have done to the drone before :wink:

[2019-08-12 16:57:20] bin4ry : so i would manually put back stock

[2019-08-12 16:57:26] cantrepeat : yes it does I'm looking for the stock one and the part at which fc changes it

[2019-08-12 16:57:26] bin4ry : and the fact that you still have root

[2019-08-12 16:57:41] bin4ry : shows clearly that it didn't flash shit on your drone

[2019-08-12 16:57:42] bin4ry : lol

[2019-08-12 16:57:57] cantrepeat : well, I dumlracered, fc patched, dumldore stage2 for nfz and that was about it

[2019-08-12 16:58:04] bin4ry : yes

[2019-08-12 16:58:11] bin4ry : but you said it hangs at 96%

[2019-08-12 16:58:18] bin4ry : it hangs before that

[2019-08-12 16:58:28] bin4ry : as the system partition didn'T get updated

[2019-08-12 16:58:32] bin4ry : you still have root :wink:

[2019-08-12 16:58:53] cantrepeat : yeah, now when trying to flash with NLD 1.9.3 with any FW it hangs at 96%

[2019-08-12 16:58:59] bin4ry : yes

[2019-08-12 16:59:00] cantrepeat : and yes root is persistant

[2019-08-12 16:59:06] bin4ry : most likely it cannot verify the system image

[2019-08-12 16:59:12] bin4ry : and thus doesn't flash it

[2019-08-12 17:03:36] cantrepeat : ok I've got both dummy_verify.sh and original_dji_veryify.sh on my bird in vendor/bin

[2019-08-12 17:03:49] bin4ry : ah ok

[2019-08-12 17:04:05] bin4ry : original can be started ?

[2019-08-12 17:04:35] cantrepeat : not sure, if I rename then and reboot the bird that should work, right?

[2019-08-12 17:04:44] bin4ry : just try to run it

[2019-08-12 17:05:07] bin4ry : don't make stupid things

[2019-08-12 17:05:13] bin4ry : :wink:

[2019-08-12 17:05:58] bin4ry : lets move to a private chat maybe

[2019-08-12 17:06:02] bin4ry : we are spamming the channel

[2019-08-12 17:13:06] brett.e.burkhart : No @bin4ry and @catalinaskirace I was following with interest! I have something similar with my bird. Won’t flash a new NFZ.db. Hangs at 96% if I try to flash a full firmware image. To flash a new firmware I have to remove the 905 module. I’m ok with that but would love to know why that happened. @catalinaskirace what root way did you use?

[2019-08-12 17:14:29] brett.e.burkhart : Brings up another question... is there really any reason to keep dummy_verify and original_dji_verify in vendor/bin after patching?

[2019-08-12 17:15:14] bin4ry : gimme some time to analyze

[2019-08-12 17:15:26] brett.e.burkhart : Kk thanks!

[2019-08-12 17:15:34] validat0r : not really, but it's of no consequence either

[2019-08-12 17:17:17] brett.e.burkhart : Thanks @ilovemynexus4 that’s kinda what I figured but good to have confirmation

[2019-08-12 17:19:40] cantrepeat : I used dumlracer 1.1.1

[2019-08-12 17:20:10] cantrepeat : nothing different from it and 1.1 other then support for goggles

[2019-08-12 18:02:44] bin4ry : @brett.e.burkhart problem is with the nfz patch somehow. or some version of it. it confuses some files there, very strange and the files restore themselves :smile: i need to check which versions where used and what happened

[2019-08-12 18:31:47] bin4ry : i think we got it

[2019-08-12 18:32:03] bin4ry : @catalinaskirace will test a bit more and report back

[2019-08-12 18:36:23] cantrepeat : @brett.e.burkhart which root and which NFZ bypass did you use?

[2019-08-12 18:44:05] brett.e.burkhart : So when this issue started I had used uberspolits after a few failed attempts with dumlracer. I had the same issue firmware mismatch but that ended up being because I deleted the NFZ folder like an idiot. After a few days of pulling my head out I was able to downgrade to 01.03.0400 and then upgrade to 01.03.0700 and got the NFZ.db back. But then when trying to upgrade to 01.04.0300 it still wouldn’t flash hangs at 96%. I finally removed 905 module from 01.04.0300 and flashed and that worked fine. Still can’t flash a full firmware image with a 905 module so I still have the NFZ.db from 01.03.0700 but have since done stage2.bin and that worked fine confirmed it is cleared out. So my issue is unrelated to stage2. Did you check to see if you have a signed NFZ.db? I bet that’s what is causing the firmware mismatch

[2019-08-12 18:45:27] cantrepeat : ok, so there are many different ways to zero out the NFZ.db

[2019-08-12 18:46:14] cantrepeat : I used an older dumldore and jezzab stage2.bin which works and works well. This is not his fault nor NLDs for that matter

[2019-08-12 18:46:31] cantrepeat : it's just a mismatched db that stops it from working

[2019-08-12 18:46:32] brett.e.burkhart : Yea mine too not related to NLD

[2019-08-12 18:47:35] cantrepeat : so with bin4ry's help I was able to get back some factory db and sig files and can now flash 100%

[2019-08-12 18:47:56] brett.e.burkhart : Did you just push them with adb?

[2019-08-12 18:48:26] cantrepeat : there shouldn't be many people on FC patcher and dumldore NFZ bypass as that was a while back

[2019-08-12 18:48:39] cantrepeat : yes

[2019-08-12 18:48:54] brett.e.burkhart : Anyway you could send them to me?

[2019-08-12 18:49:26] cantrepeat : sure

[2019-08-12 18:49:29] cantrepeat : and this

[2019-08-12 18:49:32] cantrepeat : adb push nfz.db /ftp/upgrade/ adb push nfz.sig /ftp/upgrade/ adb shell /system/bin/mount -o remount,rw /amt cp /ftp/upgrade/nfz.sig /amt/nfz/nfz.sig cp /ftp/upgrade/nfz.db /amt/nfz/nfz.db chmod 755 /amt/nfz/nfz.* /system/bin/mount -o remount,ro /amt reboot the drone

[2019-08-12 18:49:37] brett.e.burkhart : Yea for the record this was my damn fault

[2019-08-12 18:50:14] cantrepeat : so until NLD comes out with custom firmware I'll probably use FC patcher and use NLD NFZ bypass

[2019-08-12 18:50:16] brett.e.burkhart : Nice I would have forgot about the chmod thank you

[2019-08-12 18:50:33] cantrepeat : pm me

[2019-08-12 18:59:57] cantrepeat : so, without stepping on toes there are some compatibility issues with a few of the NFZ bypasses out there.

[2019-08-12 19:22:25] quad808 : Good work all

[2019-08-12 19:23:28] brett.e.burkhart : Thanks @catalinaskirace and @bin4ry. I think we have both of our issues under control.

[2019-08-12 19:29:11] cantrepeat : can NLD 1.9.3 flash custom FC patcher FW?

[2019-08-12 19:38:31] quad808 : Not yet, but we are working on incorporating it into NLD, so should be easy to do with fancy graphics and stuff. LOL!

[2019-08-12 19:39:19] quad808 : In the meantime, @brett.e.burkhart solution looks good, but I haven't used it personally

[2019-08-12 19:39:57] quad808 : I did all my birds oldschool manual method and blew out some brain cells in the process...

[2019-08-12 19:49:56] cantrepeat : well now that I know the issue and the fix I'll flash back to what I had

[2019-08-12 20:12:35] cantrepeat : I'm also now wondering if there is something that changed in the NLD patched 4.1.22 that now has a compatibility issues with other NFZ.dbs

[2019-08-12 20:16:08] quad808 : Nope, no issues. the NLD GO has no NFZ in it.

[2019-08-12 20:52:03] cantrepeat : odd assistant doesn't recognize the MPP now either

[2019-08-12 20:55:32] cantrepeat : and dumldore can't seem to flash anything

[2019-08-12 21:02:10] quad808 : DUMLdore detect it?

[2019-08-12 21:02:18] quad808 : what about NLD?

[2019-08-12 21:03:15] cantrepeat : yeah they both detect current FW was on 03.0100

[2019-08-12 21:03:33] quad808 : lets go OM

[2019-08-12 21:03:35] quad808 : PM

[2019-08-12 21:04:05] cantrepeat : I us to use dumldore to flash the FC patcher FW but it just zips through the flash and doesn't do anything

[2019-08-12 21:05:07] quad808 : to use the FC patcher firmware, you need to be on 01.04.0300 stock

[2019-08-12 21:05:38] madmaqx11 : Enable adb first

[2019-08-12 21:10:05] brett.e.burkhart : Did you flash to 01.03.1000 at some point? How the hell did you get on that firmware? And you do mean 01.03.1000 right? I don’t think there is a 01.03.0100

[2019-08-12 21:37:41] cantrepeat : you don't need to use adb to flash on dumldore

[2019-08-12 21:37:55] cantrepeat : sorry 4.0100

[2019-08-12 21:38:43] cantrepeat : @quad808 sorry making dinner I'll get with you in a few

[2019-08-12 22:46:07] cantrepeat : ok everyone can go back to normal business and just know that I'm a fucking toolbag today

[2019-08-12 22:47:31] cantrepeat : remember to read your notes kids!!!

[2019-08-12 23:01:40] madmaqx11 : Lol

[2019-08-12 23:06:36] cantrepeat : ok so I had used dumlrace for my root and dumldore for my NFZ by pass. the stage2.bin from the dumldore which has issues with NLD client of some sort, the stage2.bin has a db and sig that NLD client does not recognize thus wont flash past the 96%

[2019-08-12 23:08:02] cantrepeat : as far as my not getting my custom FC Patch FW back on my drone I was an idiot and did not remember the method to get a custom FW onto the bird, you just can't use dumldore straight up to do that. When I read my FC shortcut patch doc I wrote I remembered what to do.

[2019-08-12 23:08:07] cantrepeat : all good in Oz now.

[2019-08-12 23:08:55] cantrepeat : that will still leave anyone with a stage2.bin NFZ by pass wondering why NLD client hangs at flash NFZ_DB

[2019-08-12 23:09:28] madmaqx11 : U got all winter:grin:

[2019-08-12 23:09:41] cantrepeat : possibly ubersploits NFZ bypass as well since I believe it uses the same db and sig as old dumldore

[2019-08-12 23:10:37] cantrepeat : just got done testing and all is good quick run up to 1k and back down. First checking my flightaware for anything around.

[2019-08-12 23:11:31] cantrepeat : @cs2000 I'll upload that 905 nfz.db and sig with some instructions to dank

[2019-08-12 23:12:00] cantrepeat : sure wish the NLD forums were back online.

[2019-08-13 00:23:53] cantrepeat : when you don't fly for 6 plus months you forget how much fun it really is

[2019-08-13 00:26:34] cantrepeat : and NOR and HASH DATA success so everything is working as it should!

[2019-08-13 10:53:30] cantrepeat : to continue my buffoonery I just spent 10 minutes trying to d/l flyctrlxx.dat from my crystalsky. Man, I need to make stronger coffee!!

[2019-08-13 10:57:15] cs2000 : Thanks mate, Forums are back very very very soon!

[2019-08-13 23:49:21] brett.e.burkhart : is nld down right now? I cant open the desktop app or get to the website

[2019-08-13 23:54:50] cantrepeat : app wont open for me either

[2019-08-13 23:55:41] cantrepeat : process was running

[2019-08-13 23:56:03] cantrepeat : shows in task manager but no window so yeah network issue of some kind

[2019-08-14 00:00:28] pross : its returning a ping … thats all

[2019-08-14 00:03:54] quad808 : Will be back up shortly

[2019-08-14 00:15:17] cantrepeat : haha quad give the server the blue pill!!! :smile:

[2019-08-14 07:38:28] cs2000 : NLD was indeed down for afew hrs to actually impliment some long awaited (and long worked upon) code changes to the website. Part of this means that the forums are back! finally :joy: Im just cleaning up some Spam left from when it was taken down previously, but fingers crossed this keeps the Russian brides away!

[2019-08-14 09:15:37] cantrepeat : sweet, great morning treat to go with the coffee!!

[2019-08-14 09:59:39] d95gas : Nice to see the forum back :+1:

[2019-08-14 17:04:07] quad808 : What!! NO RUSSIAN BRIDES!! WTF!

[2019-08-17 09:20:11] ken165 : is there any problem with [nolimitdrone.com](http://nolimitdrone.com)? i paid for a key, but the site shows unpaid

[2019-08-17 19:27:32] bobdole : yeah it is a site that is not set up yet.

[2019-08-17 19:27:48] bobdole : don't buy a key at [nolimitdrones.com](http://nolimitdrones.com) either...

[2019-08-17 19:28:01] bobdole : [nolimitdronez.com](http://nolimitdronez.com) should work

[2019-08-18 03:16:18] ken165 : yes，i bought at [nolimitdronez.com](http://nolimitdronez.com)

[2019-08-19 07:58:05] cs2000 : @ken165 if you haven't already, submit support ticket, we will get it resolved. Sometimes theirs weird payment flow issues.

[2019-08-19 22:12:49] nickmv : can anyone tell how to enable/disable the 2.3 and 2.5ghz modes?

[2019-08-19 22:12:57] nickmv : (mavic pro, NLD Go 4 app)

[2019-08-20 08:42:22] reaktor : When I log into Nolimitdronez I get Chinese.

[2019-08-20 08:42:52] reaktor : Are Chinese the new Russians??

[2019-08-20 08:46:30] reaktor : Also it is selling NLD v1.9.2.5

[2019-08-20 10:13:04] cantrepeat : you can change language with the drop down menu on the right

[2019-08-20 10:13:39] cantrepeat : The client will auto update to the latest version when you start it.

[2019-08-20 10:14:01] cantrepeat : <https://nolimitdronez.com/>

[2019-08-21 02:31:16] brett.e.burkhart : Mine did this too but fixed now, thanks. I just thought I had clicked on one too many Russian Brides ads

[2019-08-21 06:05:23] webmaster : Does the NLD website work for anyone here?

[2019-08-21 06:05:45] webmaster : It says:

[2019-08-21 06:08:42] webmaster : What do you mean by "was" down?

[2019-08-21 06:36:03] webmaster : <https://twitter.com/Deskmodder/status/1164055929823907840> Maybe the framework update caused this? :smile:

[2019-08-21 07:51:56] rickysuper : The site is down right now

[2019-08-21 08:09:03] cs2000 : Checking on the server now, im sure Coldflake knows, but il poke him to be sure!

[2019-08-21 08:11:24] cs2000 : set the channel topic: **NLD:** Down | **Support:** Down | **Latest Version:** 1.9.3.0

[2019-08-21 11:04:18] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.9.3.0

[2019-08-23 07:26:56] daviskat : Can I flash the M2 gimbal camera module firmware separately? Because the patch NFZ is going to drop to 0100FW, when it is downgraded to 0100, the camera will experience video jitter, but the 0400FW camera will not shake the video.

[2019-08-23 07:37:16] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.9.3.5

[2019-08-23 14:35:40] rickysuper : any informations about the latest 1.9.3.5 update ?

[2019-08-23 17:35:52] reaktor : Yeah! What's new in 1.9.3.5?

[2019-08-23 18:07:00] pross : `<https://nolimitdronez.com/nld-1935-is-here>`

[2019-08-23 18:33:15] cantrepeat : @coldflake @quad808 @cs2000 Any known issues with using 1.9.3.5 with different NFZ db by passes such and uberslpoit or older dumldore stage2s ??

[2019-08-23 18:36:45] cantrepeat : asking for a friend :smile:

[2019-08-23 19:12:08] rickw001 : what happened to boost for mavic pro 1 ?

[2019-08-23 19:50:28] chipmangini : @coldflake @cs2000 Can't login to <https://nolimitdronez.com/login> with my login/password. Can't reset my password, as it doesn't see my email as a registered member....

[2019-08-23 20:45:23] quad808 : @catalinaskirace don't think so, should be fine.

[2019-08-24 06:11:34] bjoneseying : 1936!

[2019-08-24 07:58:51] webmaster : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.9.3.6

[2019-08-24 15:10:18] bobdole : demand changelog 1.9.3.5 to 1.9.3.6!

[2019-08-24 17:25:57] guson : MP1 and .700 . Trying the nld 1.9.3.6 FCC Parch but keep getting “patch failed”. Did a reflash of .700 and then tried again, same error. Any ideas?

[2019-08-24 17:48:03] bin4ry : ————- With this release, we have enabled the FCC patch for the Mavic Pro 1, the only requirement being that you’re running firmware 01.04.0300 or below. ————-

[2019-08-24 18:25:55] guson : Ok then I wonder if something does not work properly? I am on .700 which was last where Altitude limit could be removed. Flashing now to 01.04.0300 and will try fcc patch again. It will of course remove the altitude removal feature and the bird side NfZ feature which was so good in .700 firmware. But I will test and see if this is an issue in NLD toward .700. If it works with 1.04.0300 then I assume so?

[2019-08-24 19:18:32] guson : Update. Did not work. Reverted to use superpatcher instead and worked instantly there

[2019-08-24 19:33:35] bin4ry : ?

[2019-08-24 19:34:21] bin4ry : i don’t understand what you the to achieve. fcc mod birdside != superpatcher

[2019-08-24 19:37:42] bin4ry : btw a patch failed points in most cases to a network issue. did you open a suppprt ticket already? maybe support can help you :blush:

[2019-08-25 11:14:56] guson : @bin4ry I wanted to have my MP1 to have FCC patch on bird just like I have on my MP2 using Nld. I am quite sure superpatcher with jksonfcc patch is bird side? Either way, since everything else works perfect in NLD in terms of network connectivity (ie firmware upgrade/downgrade etc) I simply made the conclusion that the FCC patch part is somewhat not working as expected? I could patch my MP2 perfectly , but not my MP1. Hence I used superpatcher 1.9 for the time being and also receiving a lot of other features to my Mp1 :).

[2019-08-25 11:45:11] bin4ry : i understand now. would need to check if maybe a suoerpatcher modded device causes incompabity or what exactly happens. we will investigate

[2019-08-25 12:20:24] guson : @bin4ry thanks, just for your investigation: when i first tried it was a clean .700 firmware , then I reflashed .700 just to rule out if something was there. Then a clean 01.04.0300 and tried, still same issue. Only after that I used superpatcher.

[2019-08-25 13:51:35] bin4ry : @coldflake

[2019-08-25 14:20:22] flymymavic : Just been out testing the fcc mod for the mp1, had an issue with the goggles, a message about strong electromagnetic interference kept popping up and I was losing video display. I’ve removed the mod using JKSON mod (does NLD remove the mod ?) and the issue has cleared. Now I’ve used the JKSON mod before and had no issues. Only things I can think of is that NLD is the issue or the fact then I’m using Brett’s version of 0300.

[2019-08-25 14:50:00] bin4ry : retry the mod. jkson mod and nld mod work the same way. interference issues should just be exactly the same or not :wink:

[2019-08-25 15:04:30] bin4ry : btw: smartcontroller?

[2019-08-25 15:43:43] flymymavic : @bin4ry no mate, normal controller, I’m just flashing a standard 0300 and will try it again, just had a thought, my goggles were at 45% battery level, wonder if that was a factor

[2019-08-25 15:48:53] bin4ry : i really don’t know, but jkson mod and nld mod does not differ from what they do (nld doesn’t give you a choice though, but the command used to set the mod is the same). so either there is something not working properly during the patch or it was bad luck ...

[2019-08-25 16:39:30] brett.e.burkhart : I thought maybe if NLD used a script name other than check_1860.sh or puts it somewhere other than in vendor/bin then possibly you could have two scripts trying to do the same thing at the same time that could interfere with each other but if it’s the same then idk. Pushing a new file should overwrite the old one.

[2019-08-26 02:53:21] madmaqx11 : I thought i read jkson had problems with 2.3 and 2.5 with goggles

[2019-08-26 09:10:05] flymymavic : @madmaqx11 yes that is true, if you choose 2.3/2.5 then the goggles don’t work.

[2019-08-26 09:12:47] dronepilot : Getting bad range results using goggles re with m2 std rc. With sc no problem att all.

[2019-08-27 14:42:02] dnacho : Why is the price for the nld license now in euros?

[2019-08-27 14:44:39] dnacho :

[2019-08-27 15:56:50] cs2000 : <https://nolimitdronez.com/framework-forums-and-future-developments>

[2019-08-27 15:56:56] cs2000 : Changed almost 2 weeks ago

[2019-08-27 16:16:17] bobdole : make it interesting and switch it to rubles

[2019-08-27 16:16:31] bobdole : :putiniswatchingyou:

[2019-08-27 16:40:27] cantrepeat : peso conversion pls!

[2019-08-27 16:41:22] cantrepeat : @coldflake The return of our Russian Bride Service ?!? I LOVE it!!!

[2019-08-27 20:44:28] chipmangini : !DJI

[2019-08-27 23:18:52] bobdole : *pokes it*

[2019-08-27 23:19:24] dronepilot : Have tested the M2 with sc and normal rc only fcc the difference are big between them on range.

[2019-08-29 00:43:17] coldflake : @rgf8aerial How big is the difference and which did you find to be the better one?

[2019-08-29 01:29:24] coldflake : That's a pretty awesome vid

[2019-08-29 01:29:56] coldflake : I also assume that you got bird back evne though it didn't make it all the way home :)

[2019-08-29 01:30:26] coldflake : Do you mind if we link to it from our video player as an example video so users can see what to expect?

[2019-08-29 01:37:39] dronepilot : That’s correct i got caught on the way back with some wind. I will attempt to get the 12km again.

[2019-08-29 01:38:00] dronepilot : Got back the bird quickly

[2019-08-29 01:38:23] coldflake : Thats good news :)

[2019-08-29 01:39:01] dronepilot : You can use the vid on the site no problem, would like to contribute with the platform.

[2019-08-29 05:27:08] bjoneseying : I found biggest issue with SC is the antenna positioning isnt as optimal as with regular RC. If you can get the SRC antenna to sit at the same angle/position, the range is same, just way more awkward on the SRC than the regular RC.

[2019-08-29 18:01:56] almog.baku : hey

[2019-08-29 18:02:13] almog.baku : is the patch useable for iOS & MacOS users?

[2019-08-29 18:02:23] almog.baku : (i guess i can install w/ some pc)

[2019-08-29 18:15:41] quad808 : @rgf8aerial WOW. That flight was with the regular RC, right?

[2019-08-29 18:39:30] quad808 : No wonder on NLD support we get complaints from peeps who use SC and say that there is no range increase. Is there a trick to increasing range on the SC??

[2019-08-29 23:03:34] quad808 : I don't know if anyone has tested the SC with a RF meter to measure output to see if boost mode even can work on that RC??

[2019-08-30 02:12:32] bjoneseying : THere's definately range increase with SRC, I have 3x stock RCs and 1x SRC so I'm not picking favorites but the antenna positioning is the tricky bit. Finding optimal position with SRC isnt as easy as is with stock RC, orientation is key but viewing angle in turn is sub-optimal.

[2019-08-30 02:54:41] bobdole : does your favorite youtube influencer have a 45 minute video talking about this?

[2019-08-30 02:55:05] bobdole : i also thought my knuckles were too fat for the smart controller

[2019-08-30 09:16:54] cantrepeat : @jacksphone I believe one of the kardashian has a full length video on the subject. It's either that or a sex tape.

[2019-08-30 14:06:18] bjoneseying : cut back on the burritos i guess?

[2019-08-30 14:10:04] bobdole : :burrito: less burrito? NEVER

[2019-08-30 16:55:10] cantrepeat : tacos > burritos!!

[2019-08-30 20:31:31] quad808 : sex tape? where? bwahahahahaha

[2019-08-31 18:51:21] nublish101 : hey guys can i altitude patch with nld on mpp 1.04.300 yet

[2019-08-31 18:52:06] nublish101 : or do i have to manauly patch as i want to use most of nld's stuff but i need to remove altitude limit in the drone

[2019-08-31 19:06:52] quad808 : Not yet...it's coming.....

[2019-08-31 19:58:34] nublish101 : also i flreflashed my firmware vbefore applying the new fcc patch from nld

[2019-08-31 19:59:09] nublish101 : since i was originally usign superpatch and the loop pacth for fcc

[2019-08-31 19:59:45] nublish101 : as in the veriant where you can switch between defaul fcc and fcc boost

[2019-08-31 20:00:12] nublish101 : and that had seemed to stay evenm after reflashign also my normal+ speed patch didnt apply either

[2019-08-31 20:00:26] nublish101 : so i just downgraded to .200 and then back top .300

[2019-08-31 20:00:31] nublish101 : and see if that fixes it

[2019-08-31 20:03:22] dronepilot : Today flight Mavic 2, standard rc with nld fcc only. Dji Go 4.3.24 app, firmware.300 ac / rc. <https://www.youtube.com/watch?v=kFDTxHddRjI>

[2019-08-31 20:34:27] nublish101 : @quad808 i have soem serious funkynes goigning on with my MPP i reflashed the firmware 4 times now and downgraded and upgraded 2 of those times-

[2019-08-31 20:34:47] nublish101 : but for soem reason when i try to apply any mods ity feels a-s if its still usign my last flash with su-perpatcher

[2019-08-31 20:35:40] nublish101 : like my fccbo-ost patch -is still -in l-oop- sdlector mod asin default>fcc>boost>reset to default

[2019-08-31 20:35:51] nublish101 : i cant apply speed mods like normal+ or speed+

[2019-08-31 20:36:27] nublish101 : they appear applied and if i restart the drone and look at the flight controll permaeters it acts as if they stuck but they are havign ZERO effect on the drone

[2019-08-31 20:36:43] nublish101 : any ideas wtf ios goign on

[2019-09-01 12:18:10] cantrepeat : When you say things like "i reflashed the firmware 4 times now and downgraded and upgraded 2 of those times" you should probably say what versions and flavors of FW you are flashing and by what method/tools you are using.

[2019-09-01 12:32:45] ken165 : anyone knows how to downgrade to 1.02.0200 for i2

[2019-09-01 12:33:18] ken165 : dumldore shows flashing complete quickly

[2019-09-01 12:53:58] cantrepeat : <https://nolimitdronez.com/birdmap>

[2019-09-01 12:54:31] cantrepeat : what version is your i2 currently on?

[2019-09-01 18:27:20] quad808 : @nublish101 from what you are saying, you used SP, then flashed over that with stock firmware, and now NLD doesn't work right? I have only used manual patching, and not SP, so not sure if SP leaves any files in a locked state, so changes can't be made, or whats going on. No idea. In theory, any full flash after using SP should wipe all traces of it off your drone. You could try this....flash only modules 305/306 from firmware 01.04.0300 (stock) and see if that solves the problem. Use NLD so you can see if it actually flashes or not. use this.

[2019-09-01 21:59:45] brett.e.burkhart : Super-Patcher doesn’t “lock” anything. It’s the same as manually patching it’s just automated. @nublish101 try adjusting those parameters manually. Did do those parameters with SP? Maybe it doesn’t seem like it changed because it was already changed. SP firmware won’t prevent NLD or Assistant 2 from adjusting parameters.

[2019-09-01 22:56:11] mstalzer : you might need to use dumlracr to root it before you can roll back. i’d suggest trying that, then flashing with dumldore.

[2019-09-02 20:59:36] nublish101 : @brett.e.burkhart well t hjatsthe thing i did 4 test flights

[2019-09-02 20:59:58] nublish101 : 2 sdtriahgtt after reflashign clean firmware from nld with jkust nfz removed

[2019-09-02 21:00:32] nublish101 : but even with jkust the nfz patch i sitll have the loop select fcc patch from you super patcher

[2019-09-02 21:00:41] nublish101 : even though id jujst reflashed the firmware

[2019-09-02 21:01:02] nublish101 : and when it come to changign to nromal+ after 3 fresh flashes i did a fligth without normal plus and then did a flight with

[2019-09-02 21:01:15] nublish101 : and all 3 times i got identicle tresults to uppatched perameters

[2019-09-02 21:01:31] nublish101 : even thoguh after a retsrt and a repluig it returned the normal+ peremeters in nld and assistant 2

[2019-09-02 21:01:52] nublish101 : but im not gttign normal + performance

[2019-09-02 21:02:34] nublish101 : and why do i sitll have the loop slect fcc pacth afeter reflashing x.04.300 2ce and doing a downgrad to .200 and upgradign to 300 2ce

[2019-09-02 21:02:45] nublish101 : even afterf that i sitll have reminance of superpatcher mods

[2019-09-02 22:07:07] quad808 : When you are using NLD, are you sure you hit apply mods to save the changes? Just checking...

[2019-09-03 04:04:09] brett.e.burkhart : @nublish101 You have remnants of the jkson_fcc_mod which isn’t tied to firmware necessarily. It’s just a file that gets uploaded to the drone. If you want to get rid of it you can use can use Super-Patcher 2.0, choose option #5 in the mainmenu to launch jkson_fcc_mod and then choose option 2 to delete jkson_fcc_mod settings. Using NLD FCC mod will also overwrite this file if I understand correctly how NLDs FCC mod works. Note: That jkson_fcc_mod is not related to the flight controller so the issue you are having is unrelated. I believe the issue you are having is because “normal+” is for P-GPS mode with the front sensors OFF. The front sensors will limit the tilt angle due to the fact that they can only sense and avoid up to a certain angle. Therefore if flying too quickly (too much tilt) the forward sensors could no longer see and avoid obstacles. DJI’s settings are really conservative, however. You can increase flight performance with the front sensors on by adjusting the “avoid” mode parameters. They can be increased significantly without even exceeding the max attitude for the front sensors to work. g_config_avoid_cfg_avoid_atti_range g_config_avoid_cfg_avoid_rc_scale g_config_control_avoid_atti_range Increasing the value of these parameters will increase the agility and max speed in P-GPS mode with the front sensors on. You CAN exceed the tilt limit to which the OA sensors can see but you really have to floor it. If you do you’ll get a friendly message from the flight controller that max attitude has been reached and it will turn OFF the front sensors until you slow down. It will turn them back on once you slowed down (leveled out)

[2019-09-03 04:52:10] nublish101 : erm is there anyway to completely wipe my droine and strartr wioth a clean bird

[2019-09-04 11:12:12] cs2000 : Guys, random question, when you were new to NLD, what "pain points" did you experience. What do you wish you knew before-hand, or was difficult to do until you found out how?

[2019-09-04 11:29:19] pross : The need for windows was my pain point.. then figuring out how to make USB work in virtualbox was a PITA, I can write a small howto on that at some point if you like?

[2019-09-04 13:32:50] cs2000 : @pross That would be good if you're willing! I will give you credit too.

[2019-09-04 14:10:28] cantrepeat : <---- will work for beers!! !beer

[2019-09-05 17:31:29] coldflake : Just FYI, we are working on NLD V2

[2019-09-05 17:31:47] coldflake : New user interface and loads of new and old functionality

[2019-09-05 17:32:28] coldflake : Hopefully it will hit the internet next week

[2019-09-05 18:11:53] d95gas : :+1: Nice one, Hope there is some goodness and luv for us old MP boyz

[2019-09-05 18:53:55] fabiotekno125 : :+1: Nice . News Mp2 Downgrade Firmware block ?

[2019-09-05 19:29:11] quad808 : !beer

[2019-09-06 18:14:07] quad808 : Do not go gentle into that good night. Good men, the last wave by, crying how bright Their frail deeds might have danced in a green bay, Rage, rage against the dying of the light. Wild men who caught and sang the sun in flight, And learn, too late, they grieved it on its way, Do not go gentle into that good night.

[2019-09-06 18:45:27] cantrepeat : Yea, though I walk through the valley of the shadow of death, I will fear no evil:

[2019-09-06 18:45:40] cantrepeat : for I am the worst drone pilot in the land!

[2019-09-06 20:05:27] cs2000 : @jacksphone With regards to "compared to publicly available tools" what do you mean? Nothing im aware of will do anything more than NLD for the Mavic Air

[2019-09-06 20:06:12] cs2000 : But in general "make it clearer what NLD can and cannot do for each bird" is your suggestion. Understood :slightly_smiling_face:

[2019-09-06 20:12:28] brett.e.burkhart : Just too piggyback off this I think the bird map could use some love in the clarity department. I think adding a grid in there would make it much more clear. Every time I look at the Mavic Air bird map the first time I read it I think that altitude removal is available for Mavic Air. Causes me to do a double take and I do figure out the second time around but I think grid lines would help a lot. I’m also confused about the NFZs for the Mavic Air. Can NLD remove NFZs for Mavic Air? It says it can in the description but under the NFZ parts of the bird map it doesn’t indicate it can.

[2019-09-06 20:13:19] cs2000 : Thanks :slightly_smiling_face: SO again, "make it clearer what NLD can and cannot do for each bird"

[2019-09-06 20:16:22] cs2000 : And FWIW, i absolutely agree, genuinely, we all do

[2019-09-06 20:30:10] webmaster : Just stop continuously resizing your browsers window dammit :smile: jk

[2019-09-06 20:35:46] brett.e.burkhart : One not a pain point as much as a thought or suggestion, would be to make it so you could purchase just certain features for a prorated cost. You could even price it so that buying 2-3 features would make it so that it’s better to just buy the whole thing or something. I think it would lower the barrier for people to become customers and then they are likely going to be more willing to buy other features once they realize it’s legit. To some degree as an iOS user it is a bit of a “pain point” I guess that we have to pay the same price but then don’t get that part of NLD. I think on the flip side of that there are people that know how to mod their bird or don’t care to but would like the security aspect of the NLD Go app. I think there’s a psychological barrier to knowing you are paying for something you don’t need or want even if the item you DO want or getting is a good price and includes the other stuff. Just my thoughts

[2019-09-06 20:40:54] cs2000 : Good suggestion, albeit not really my area of work right now. With regards to the iOS thing, i guess the end goal is to make it irrelivant what you flu with (iOS or Android) by doing all work birdside directly. Il flag @coldflake so he can look at your suggestion though :slightly_smiling_face:

[2019-09-06 20:50:02] brett.e.burkhart : Yea it’s an issue on the iPhone on all websites. Nothing is ever the right size

[2019-09-06 21:03:31] coldflake : Cool

[2019-09-06 21:38:11] cantrepeat : And for the love god, put the Russian Bride pricing on the page!!

[2019-09-07 02:43:24] reaktor : $80 Australian

[2019-09-07 12:57:49] chipmangini : !apk

[2019-09-07 12:58:48] chipmangini : "This Domain Name Has Expired - Renewal Instructions."

[2019-09-07 12:59:17] chipmangini : Can't get any apk's....

[2019-09-07 13:00:19] chipmangini : @coldflake ^^^^^^^

[2019-09-07 14:12:49] coldflake : What domain name has expired?

[2019-09-07 14:24:58] cantrepeat : [openpilotlegacy.org](http://openpilotlegacy.org) shows This Domain Name Has Expired - Renewal Instructions.

[2019-09-07 14:29:24] cantrepeat : I don't know who maintains it, just posting what @chipmangini what talking about.

[2019-09-07 14:53:32] d95gas : Was it not one of Bin4ry's?

[2019-09-07 15:22:58] coldflake : You can download all apks through NLDs apk patcher

[2019-09-07 15:23:01] coldflake : For free of course

[2019-09-07 15:23:32] coldflake : We have them all on our cdn

[2019-09-08 19:08:34] nopcode : hey, what's the prospect of NLD being ported to newer m2p firmwares?

[2019-09-08 19:08:42] nopcode : haven't been here in a while

[2019-09-08 19:46:09] cantrepeat : 90 90

[2019-09-09 08:10:06] cs2000 : @nopcode You mean 01.00.0400? Yeah its something were working on

[2019-09-09 09:06:03] cat.db :

[2019-09-09 09:06:05] cat.db : @catalinaskirace

[2019-09-09 09:21:19] cantrepeat : ~crystalsky_rooting

[2019-09-09 12:34:20] trollspeed : Any news on mavic Air? :)

[2019-09-09 13:49:21] nopcode : @cs2000 ok, thanks, looking forward to it. yeah, 400 should be fine

[2019-09-09 18:52:45] buuddy : FCC Boost question for you guys --- how do I know if it works for not? Every time I apply the change it looks like it's applying, but when I load up NLD again it offers me to add it just the same. When I fly, range doesn't feel any stronger, is there a screen I can look at/value to look for to verify?

[2019-09-09 19:02:00] quad808 : Depends on your drone, what model do you have?

[2019-09-09 19:06:47] buuddy : @quad808 I have a mavic pro 1 (shoud have said). I'm running the .300 firmware.

[2019-09-09 19:07:34] buuddy : I primarily use litchi on iOS (likely out of misguided paranoia) and at times do use NLD Go on android.

[2019-09-09 19:10:25] quad808 : Ok, check this screen shot out, easy to tell if FCC mode is on or off:

[2019-09-09 19:10:35] quad808 :

[2019-09-09 19:11:15] buuddy : Thanks. What about FCC boost?

[2019-09-09 19:11:44] quad808 : Look at the white lines that run left to right or for dyslexics right to left, UNTIE!

[2019-09-09 19:12:18] quad808 : FCC boost is not shown, and the only way is to hook up a rf meter and actually measure the signal

[2019-09-09 19:13:01] quad808 : (UNTIE is a joke...get it?!)

[2019-09-09 19:13:21] buuddy : :slightly_smiling_face: I will never untie

[2019-09-09 19:15:21] buuddy : Oh, ok. but while you showed the screenshots, just so I understand.... is the difference in the screenshots that CE mode horizontal lines are lower on the chart?

[2019-09-09 19:15:50] pross : FCC the line is between the 80 and 90

[2019-09-09 19:16:54] buuddy : thank you

[2019-09-09 19:17:54] pross : There isnt a UI way to test Boost, you need an RF meter.

[2019-09-09 19:20:27] buuddy : For a next dummy question -- if I were to use stock, app store DJI Go, the latest and greatest that I'd install today and I've already flashed NLD and I ignore anything that tries to guilt me into upgrading firmwares, will the app still tell me that I can't fly or launch at certain areas? or does it not even bother? I've been paranoid to run the stock ios app and there might be no good reason for that concern.

[2019-09-09 19:23:50] 007 :

[2019-09-09 19:24:12] pross : ^^ I have the exact same one :slightly_smiling_face:

[2019-09-09 19:33:41] quad808 : @buuddy If you ran the NLD NFZ patch and you use stock GO, the patch will still work. You will still see NFZ areas in GO, but shouldn't get warnings. You MUST start up in this order: RC--Drone, connect, then connect device running the GO app. This is to prevent the GO app from overriding the patch and using the NFZ in the GO app instead.

[2019-09-09 19:37:12] buuddy : @quad808 thx. So, I can basically have everything connected (DJI go app NOT running on phone), power on RC, power on Drone. Wait for them to connect, then start the app,

[2019-09-09 19:37:58] quad808 : Yes, but must start NLD GO first, then kill it, then run DJI GO after

[2019-09-09 19:38:37] buuddy : Oh, but I can't do that b/c i'd be on ios and don't have nld go there... thanks for clarifying.

[2019-09-09 19:38:59] buuddy : I have been using litchi (iOS) w/o issue, but I'd like some of the Go features.

[2019-09-09 19:39:00] quad808 : Oh wait. iOS, you still will be good to go as long as your startup order is the same

[2019-09-09 19:40:08] quad808 : Nevermind about running NLD GO, I was thinking about something else...brain fart

[2019-09-09 19:41:03] buuddy : That sounds good. I'll give it a shot.

[2019-09-10 15:55:44] dnacho : Does the removal of a p4p+ have any special requirements? Like do I need to do anything different?

[2019-09-10 18:02:21] dronepilot : Any news for SC boost?

[2019-09-10 18:05:05] cantrepeat : the bounty money was spent on !hookers and !beer

[2019-09-10 22:09:08] chipmangini : !apk

[2019-09-11 17:17:31] nublish101 : Could. We posibally get frequency options in nld as if I'm trying to stream. Over WiFi my signal to bird gets trashed

[2019-09-13 19:39:56] fabiotekno125 : News NLD v2 ?

[2019-09-13 21:05:26] coldflake : @fabiotekno125 Yes, we are working hard on it

[2019-09-13 21:05:39] coldflake : Much easier and much cleaner UI

[2019-09-13 21:22:43] fabiotekno125 : @coldflake news pro2 downgrade ?

[2019-09-14 01:58:58] nublish101 : I wish there was a 5ghz ocusync for mpp :(

[2019-09-14 03:05:06] bjoneseying : Gotta get the M2Z for that

[2019-09-14 03:06:47] bjoneseying : For me at least - Ocusync 2.0 on 2.4Ghz only is almost as bad as Ocusync 1.0 - its the addition of 5Ghz which gives me a nice clean crisp feed at range. There's just way too much interference in my area on 2.4Ghz.

[2019-09-14 05:05:48] lolo780 : Same, 5.8 works 3x better here

[2019-09-16 04:41:05] nublish101 : Heh depending how I do with my eth coin betting I might buy a m2z

[2019-09-16 08:50:12] cs2000 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.9.3.7

[2019-09-16 17:02:35] bobdole : ahh fudge i should have sold my eth coin in january

[2019-09-16 17:03:38] bobdole : of 2018. in june/july 2017 i was telling some random guy at a beach to buy eth coin. it was like $240 then it went to 1200 a few months later

[2019-09-16 17:05:38] bobdole : i predict a bitcoin surge towards end of next year. if prices drop due to market manipulation, it should then skyrocket. i think i'll bet my car on that one

[2019-09-17 23:25:48] dnacho :

[2019-09-17 23:25:53] dnacho : Can this inspire 2 be unlocked?

[2019-09-18 00:26:25] dnacho : Because on the bird map it doesn't say anything

[2019-09-18 00:43:40] quad808 : What are you wanting to do to it?

[2019-09-18 00:45:39] quad808 : Check the birdmap to see what can and can't be done on each firmware version. Yes you can downgrade firmware if needed with NLD.

[2019-09-18 00:56:41] dnacho : Just remove the NFZ

[2019-09-18 00:56:59] dnacho : On the bird map that fw version is not listed

[2019-09-18 02:10:10] quad808 :

[2019-09-18 02:21:01] dnacho : Oh ok it's just that on the drone it shows it as 1.02.0300

[2019-09-18 20:35:36] lolo780 : I2 should work finr

[2019-09-18 20:35:39] lolo780 : Fine

[2019-09-20 09:07:00] user5000 : Hey guys a few questions: - will there be a feature to activate my m2 pro with NLD (no DJI registration?) - Can i buy a few keys for NLD and use them later offline? I figure your program needs to be online for that?

[2019-09-20 10:44:57] cs2000 : @user5000 - Probably not, but i guess never say never... - NLD ALWAYS needs an internet connection, it constantly downloads resources and validates the license

[2019-09-20 11:20:14] user5000 : thanks for the info

[2019-09-22 05:30:46] err0r4o4 : I was wondering.. Does DJI Goggles for Mavic Pro replace the Go App ? Can I use these goggles with my hacked Mavic ?

[2019-09-22 21:21:11] err0r4o4 : At first I was all about range and altitude but you waste all that battery getting there and then you need to come back, so nowaday I prefer flying nearby but have more time to "explore" and enjoy the scenery.

[2019-09-23 11:20:49] flymymavic : Rubens [5:05 PM] replied to a thread: I was wondering.. Does DJI Goggles for Mavic Pro replace the Go App ? Can I use these goggles with my hacked Mavic ?

[2019-09-23 11:21:26] flymymavic : I use the goggles without the go app, you need to use either superpatcher or a mixed mod FW and remove height and NFZ.

[2019-09-23 18:44:59] dnacho : Does anyone know if a m2p running 1.00.510 can be downgraded?

[2019-09-23 18:45:15] dnacho : Or can I do something to remove the NFZ?

[2019-09-23 18:47:33] lolo780 : 400+ from DJI has anti rollback

[2019-09-23 18:48:11] lolo780 : Or maybe 300+. Only use NLD in future, and currently I don't think there's any way.

[2019-09-23 18:51:33] dnacho : Oh ok ok yeah that's what I thought Really hope they can figure something out to make it compatible

[2019-09-23 19:50:14] quad808 : 300+ has the downgrade lock

[2019-09-23 20:20:26] dnacho : Thank you, any chance you guys are working on it?

[2019-09-23 20:36:08] quad808 : Yep, we are. Top priority.

[2019-09-23 20:36:38] quad808 : Well...along with a bunch of other things too. Always the case with NLD.

[2019-09-23 23:01:41] dronepilot : I don’t have any issues using the goggles running with no phone app. The only concern is that if anything happens you don’t have find my drone, and cannot change rth height.

[2019-09-24 04:44:14] err0r4o4 : you mean the one where they piggyback a connector so we can velcro a lipo on top of it? In any case I prefer just have a mountain of batteries than risking this drone. I'd be more adventurous if we had SSL keys of newer drones. Until then I take minimum risks with my M1P

[2019-09-24 04:47:34] err0r4o4 : What I mean is that I know nothing about these. My objective is to fly with these goggles but with the added benefits of my hacks. So in short; Can a hacked M1P fly with these. I'll gladly use the nld moddified app at the same time if required.

[2019-09-24 04:53:34] err0r4o4 : Guys I used to hack myself but life went into my way and when I came back all of you did so much work, I bought nld not really needing it.. but the stuff you did with the Super Patcher things.. Life changing for me. My M1P never crashed (Go 4 app crash to.. desktop?) since. I want to thank all of you for doing this. These days I just dont have time anymore to read smali files and search hex files for bits to change to try and disable something. My M1P is near perfection because of you. Thank you!

[2019-09-24 14:13:54] bobdole : me too.. until i took an arrow to the knee

[2019-09-24 14:50:00] cantrepeat : @jacksphone I thought that was an arrow to your achilles?

[2019-09-24 16:11:23] bobdole : its an 8 year old meme

[2019-09-28 01:36:14] yihuasteven : Hi, wan to know wheteher m2 latest 510 fw is supportted to patch?

[2019-09-28 04:13:40] bin4ry : not yet, hopefully soon. don’t update or you cannot downgrade anymore

[2019-09-28 18:51:01] dronepilot : I managed to downgrade the M2 from .400 firmware using DUML v3.15 beta. I updated yesterday through dji assistant 2. I tryed downgrade using v3.20 no success. Backup to .100 flawless and the used the M2 assistant to downgrade the battery firmware.

[2019-09-28 18:53:26] dronepilot : This was the test flight today already on .100 firmware.

[2019-09-29 00:58:55] quad808 : Was this a downgrade with the "locked" DJI firmware?

[2019-09-29 03:44:54] lolo780 : Interesting

[2019-09-29 03:45:27] lolo780 : Can anyone stuck on dji .400 try this?

[2019-09-29 03:54:18] glhs958 : well I just thought i would give it a shot and was no go. via assistant 2 i can downgrade from 510 to 400 and 300. but trying to use duml v3.20 and 3.15 to go any lower is a no go for me. also tried nld just for kicks and still a no go. I could only use assistant 2 to go between 510-400-300.

[2019-09-30 15:40:36] dronepilot : I manage to screen record the update today from .100 to .300 then back to .100 and doesn’t go anymore.

[2019-10-01 14:32:30] rickysuper : Any clue that my friend successfully patched FCC using NLD (100% completed), but Go4 signal status show that the line is below 90db. Mavic2 Pro Firmware version .400 Thanks

[2019-10-01 16:56:27] quad808 : Needs to look like this

[2019-10-01 17:07:06] rickysuper : Yes but he said that the upper line was always under -90 even after successfully patched.

[2019-10-02 15:35:13] flymymavic : Can’t you just use the fcc boost in Nld ?

[2019-10-02 15:36:27] bin4ry : did he properly reboot?

[2019-10-02 15:37:02] bin4ry : also nld 400 or dji 400

[2019-10-02 15:41:29] rickysuper : He said just FCC, I told him to bring the M2 to me and have a look

[2019-10-05 18:27:19] amanita : @quad808 @coldflake Can someone from the NLD team to check the support center. I have open 2 tickets and send e-mail 3 days before but not responded yet. Thanks in advance!

[2019-10-05 18:41:27] coldflake : @cs2000 could perhaps take a look as well?

[2019-10-05 21:11:10] quad808 : @amanita what email was the ticket under...don't see it. Whats the title of the ticket? Tickets are cleared DAILY

[2019-10-05 21:27:33] amanita : @quad808 The mail is [biliourisnik@gmail.com](mailto:biliourisnik@gmail.com)

[2019-10-05 21:48:30] quad808 : I see nothing from you with that title. Pls open a new ticket.

[2019-10-05 21:57:17] quad808 : Let me know when you do and I will keep an eye out for it.

[2019-10-05 22:03:18] amanita : @quad808 done, send a new ticket

[2019-10-05 22:05:54] amanita : @quad808 done, send a new ticket

[2019-10-05 22:07:06] quad808 : got it. I have upgraded it to tier 2, so there will be a delay in action for the activation key to be deactivated and then reactivated for the new drone. Tier 2 guys need to take action on it.

[2019-10-06 11:06:46] tsun : Sorry if it was asked before, is there any hope for M2 altitude unlock?

[2019-10-06 11:07:33] tsun : I'll feel stupid if I buy P4P for a few high altitude shots, and a patch gets released for M2 I already have

[2019-10-06 20:27:24] andrwho25 : as of now, theres no patch

[2019-10-06 22:33:56] lolo780 : Buy the p4p used, they're worthless these days

[2019-10-06 22:34:51] lolo780 : And sell it for what you paid after you're done. Be careful on the amp draw, I had a battery weld itself to the power board on one of mine.

[2019-10-07 18:50:48] coldflake : Work in progress - NLD V2 Firmware Manager

[2019-10-07 22:57:47] cantrepeat : pls add the areoscope haxs

[2019-10-08 08:33:29] nopcode : and a port to a more recent fw please ^^

[2019-10-08 12:05:31] cantrepeat : More recent fw requires someone with some high level skills to decode the nosec.

[2019-10-08 14:12:41] nopcode : @catalinaskirace do you mean nosec? that's the packer for the app, not the bird FW

[2019-10-08 14:12:46] nopcode : secneo even

[2019-10-08 14:13:11] cantrepeat : yeah, lol

[2019-10-08 14:13:54] cantrepeat : and yeah, you said fw and I was think about an updated app

[2019-10-08 14:15:03] arielei : The new NLD will support M2 0500/0510 downgrade or 0510 NFZ？

[2019-10-08 15:16:21] bobdole : how bout the mavic mini

[2019-10-08 15:50:16] bin4ry : mavic mini wifi again?

[2019-10-08 17:39:23] fredmicrowave : Is the only way to get nfz on the mp2 by getting one with V01.00.0200, or earlier firmware ? I though V.0300 was downgradable too ...

[2019-10-08 17:57:11] quad808 : it depends. If your M2 has up to .0400 that is the "magical" downgradable firmware, you are golden and can use NLD to downgrade. Remember that DJI did a "silent" change to both .0400 and .0300 firmware to prevent any downgrading, since NLD figured out how to get rid of NFZ on .0100. How do you know if you have the downgradable firmware? Use NLD and try and downgrade to any firmware below what you have currently on the drone. If NLD goes past 15%, then you are golden. If NLD sits at the 15% mark and goes no further after 10 minutes, nope...not gonna happen.

[2019-10-08 18:41:10] fredmicrowave : Ok thanks! That´s good to know. Complicated however if you want to buy a M2 ... I suppose any M2 that was not offline got silently updated.

[2019-10-08 18:53:05] quad808 : No, the update was to the firmware files themselves housed on DJI servers. NLD was fortunate to grab the original firmware files from the DJI servers BEFORE they turned on the anti-rollback...ahem..."feature" and didn't tell anyone

[2019-10-08 18:54:24] quad808 : This is why you can safely use NLD to upgrade and downgrade up to .0400 and not get the anti-rollback on your bird. If you use DJI Assistant and or DJI GO, to update, you are screwed.

[2019-10-08 18:54:45] fredmicrowave : Oh i see. So any m2 updated after a certain date will have the "feature" enabled... Any idea of when was that ?

[2019-10-08 18:55:52] bobdole : hey what about "inconsistent firmware" message when you try to fly the NLD 0400 m2 firmware? does letting it update the battery/controller screw anything up?

[2019-10-08 18:57:16] quad808 : Updating the battery and or controller should be safe to do. I don't trust DJI to not do something to force a firmware update, so do this at your own risk.

[2019-10-08 18:58:01] quad808 : We need confirmation from other M2 users who have done so...I don't have one, so not 100% sure. I would be very, very cautious.

[2019-10-08 18:59:02] quad808 : The firmware(s) were changed around 7/19/19

[2019-10-08 18:59:38] quad808 :

[2019-10-08 19:01:45] fredmicrowave : Great, thanks ! So a M2 updated before that, even to .0400, could be ok...

[2019-10-08 19:12:31] quad808 : yes

[2019-10-08 19:16:26] pross : i was on 400 .. had fcc and boost applied, updated to 510 and its still working

[2019-10-08 19:21:54] fredmicrowave : Yes, but I was asking about NFZ . On NLD page boost is clearly available up to .0400

[2019-10-12 03:15:58] bobdole : i'm gonna rollback my m2p firmware using NLD to get rid of NFZ. i'm wondering though... is the DJI bowtie NFZ that they get from precisionhawk more or less compliant that airmap? because i'm finding that dji doesn't have all of the nfz correct and misses things anyway that are actual nfz (like state parks), but then has these giant bowties extending out from the airport runways that go beyond where airmap would advise a boundary is. my serious question here is are we safe just sticking with airmap?

[2019-10-12 10:11:27] dronepilot : How to undo nld fcc patch M2 bird? I have tried to refresh current fw / update to a new but stayed active. Thanks

[2019-10-12 10:26:04] bin4ry : what is even the sense of that?

[2019-10-12 10:27:40] bin4ry : i am not sure UI wise, but removal is not hard, flashing will remove the patch, it might be that the drone stays on FCC for a while. it waits for the new location from the go app, so dependent on the GO version (dji changed the logic quiet a few times), you need to change countries inside the app before it triggers CE again

[2019-10-12 10:27:53] bin4ry : so all not worth the work to switch back to a worse mode :stuck_out_tongue:

[2019-10-12 10:33:55] dronepilot : Thanks @bin4ry

[2019-10-12 17:22:46] bin4ry : if you are using nld to update you can of course downgrade again, only upgrading via go is risky. just letting this info here, in case anyone had the bad idea to try to upgrade to 400 via go :joy:

[2019-10-15 09:48:26] dronepilot : Nld nfz unlock M2 higher firmware :pray::skin-tone-2:

[2019-10-15 12:09:56] coldflake : We also have aeroscope hack ready

[2019-10-15 12:10:24] coldflake : I am not sure that it will be in the initial release of v2 but it will come shortly after in an update then

[2019-10-15 12:10:48] coldflake : V2 is so much better than the original app that it should be pushed as fast as possible I think

[2019-10-15 12:11:24] coldflake : @cs2000 and @quad808 will have a very easy job doing support when v2 comes out

[2019-10-15 12:11:37] coldflake : It takes out all the guesswork and everything is handled

[2019-10-15 12:12:05] coldflake : V2 will always be able to suggest the best way going forward to achieve the mods you want

[2019-10-15 12:12:27] coldflake : Also custom FC for older birds is also to be included

[2019-10-15 12:18:25] cantrepeat : @hkroot1314 what does that even mean?

[2019-10-15 12:18:51] cantrepeat : And who are "they"

[2019-10-15 12:22:08] daviskat : Sorry, the wrong place to send the message

[2019-10-15 13:30:11] user5000 : @coldflake is there a rought estimation on the arrival date of V2? (weeks, month, years?)

[2019-10-15 13:31:13] coldflake : Not months and not years that is for sure :)

[2019-10-15 13:31:35] coldflake : Jokes aside, we expect to be able to release the beta version next week

[2019-10-15 13:32:21] coldflake : We will release the beta for all as version number 1.9.9.0 in a separate lane from the current release version 1.x

[2019-10-15 13:32:43] user5000 : thank you!

[2019-10-15 13:38:25] cantrepeat : dibs!!!

[2019-10-15 15:45:47] coldflake : @catalinaskirace Desperate Internet Brides service?

[2019-10-15 15:45:57] coldflake : We have that too!

[2019-10-15 15:46:17] coldflake : Well not anymore after Dave got the captcha working right lol

[2019-10-15 19:57:05] bobdole : oh man.. aeroscope hack for m2???

[2019-10-15 20:03:59] bobdole : let me know if you need a guinea pig. worse case scenario i still have dji care i should probably use for some minor crash damage anyway.

[2019-10-15 21:25:00] coldflake : Yep, we have actually been sitting on it for some months

[2019-10-15 21:32:01] fredmicrowave : Man, let it go :stuck_out_tongue:

[2019-10-16 01:11:46] dronepilot : M2 would love some hack.

[2019-10-17 22:53:45] dronepilot : Since I updated the M2 firmware the nfz data base automatically upgraded. Any way around to back up this? I already did the download but still remain updated nfz.

[2019-10-19 01:00:13] bjoneseying : Unless you can roll back to .100 and then apply the NFZ patch via NLD which wipes the DB, I cant see any way around it - unless another hack is found

[2019-10-19 07:34:28] yihuasteven : hi anyone know where to find the downloaded firmware files for mavic 2 which is downloaded by nld app, i want to keep it and will not have to download it again

[2019-10-19 07:49:48] mel69hash : Download from DDD DankDroneDownloader

[2019-10-19 08:19:25] yihuasteven : since it is mentioned that m2 01.00.0400 firmware is updated anti-rollback, it is suggested to update using nld app, is it safe to use the firmware from ddd

[2019-10-19 23:52:23] mel69hash : Yes NLD too in order to hv a non anti rollback especially for M2 FW

[2019-10-20 01:23:32] brett.e.burkhart : It’s the same thing

[2019-10-21 09:46:41] cs2000 : Can confirm, the NLD 01.00.0400 and DDD's version are the exact same file since i sent it to Coldflake in the first place.

[2019-10-24 04:18:29] bobdole : I uhh... Need to open a ticket and clear all my licenses... Because I've crashed them all and lost the last one in a tree today :putiniswatchingyou:

[2019-10-24 11:09:43] coldflake : Sounds nasty

[2019-10-24 15:34:31] bobdole : yeah... i got paid a bunch to run a DroneDeploy job and after the mapping was done and it was starting to get late i discovered last minute the guy had a video flight plan ... and sure enough it involved flying into a tree.

[2019-10-24 15:35:22] bobdole : this is not the first time i forgot to check a pin placed near a tree

[2019-10-24 19:03:23] dnacho :

[2019-10-24 19:03:33] dnacho : Is there a way to remove that error on a mavic 2

[2019-10-25 06:43:52] reaktor : Question: will M2 with FCC mod still work with DJI Smart Controller?

[2019-10-25 12:37:42] reaktor : I'm after the HDMI out on the SC. If there was another way...

[2019-10-25 12:39:30] reaktor : Also I noticed the SC can live stream at 20mbps vs 10 on the standard controller. Comes in handy for live TV work

[2019-10-26 11:56:15] tsun : hey NLD, you have a bug in your bird map, resulting in an extra column without description

[2019-10-26 11:56:36] tsun : looking through the page code it looks like description for "normal+" mode column is missing

[2019-10-26 11:58:14] tsun : <https://imgur.com/a/cIJQA5b>

[2019-10-26 11:58:32] tsun : Chrome 78 on Windows

[2019-10-26 12:58:00] fredmicrowave : Maybe has to do with Chrome or you screen definition, it looks fine with Firefox here..

[2019-10-26 17:52:33] dronepilot : That’s nice something I didn’t no.

[2019-10-28 07:39:54] nopcode : still no news about more recent m2p FW support? i really don't wanna fly with an early FW with missing features

[2019-10-28 07:40:12] nopcode : so i'm stuck with only boost for now

[2019-10-30 06:22:38] reaktor : Smart controller

[2019-10-31 00:31:48] dkovar : NLD makes the news - <https://www.911security.com/blog/how-to-unlock-your-drone-and-why-we-should-not-rely-on-uas-manufacturers-for-safety>

[2019-10-31 00:46:53] quad808 : Interesting...

[2019-10-31 00:55:40] bobdole : what is this airguard that website is pushing? that "news" is a sales front

[2019-10-31 00:56:25] bobdole : likely just your usual fear mongering to push sales. i like this case study they did in vegas <https://www.911security.com/blog/case-study-las-vegas-drone-detection-in-action> seems like they weren't using aeroscope but were able to pull some guy's drone id.. [edit] they are using aerscope with "other 3rd party sensors"

[2019-10-31 00:58:11] bobdole : which... brings me to the next point...

[2019-10-31 06:28:40] coldflake : We are working hard on v2 and it will come out with the v2 release

[2019-10-31 06:29:19] coldflake : At this point we only will release another update to v1 if we need to target some bugs

[2019-10-31 06:30:36] coldflake : The current version is stable and has been out for some time so I believe that there will be no reason for releasing a v1 update

[2019-10-31 10:11:33] dronepilot : M2 full mod?

[2019-11-01 10:26:26] reaktor : Hi Guys, now I have my Smart Controller, is it safe to install the latest Go4 app on it? Has an th one tested this with FCC mod?

[2019-11-01 10:29:41] reaktor : I would also like to update my phone so I can pair with my standard controller as well.

[2019-11-01 10:31:18] reaktor : I already have Google Play and Pilot app working which is noice but wondering about the safety of updating the apps past 4.3.16

[2019-11-02 16:45:36] flymymavic : @coldflake Any release date yet for V2

[2019-11-03 09:36:53] coldflake : Yes but I don't dare to commit to it yet

[2019-11-03 09:37:11] coldflake : I have had my share of unrealistic estimates lol

[2019-11-03 09:37:20] coldflake : But the beta will be available very soon

[2019-11-03 12:35:20] cantrepeat : soon™

[2019-11-03 12:35:43] cantrepeat : I need a copyright on it! lol

[2019-11-04 09:55:30] trollspeed : Guys will you add more support for Air? Or this is a deadend?

[2019-11-04 18:19:04] quad808 : I don't speak for everyone, but the Air is very difficult to work on and open up.

[2019-11-04 20:54:40] reaktor : Thanks Rubens

[2019-11-04 22:31:53] dnacho :

[2019-11-04 22:32:42] dnacho : If it's stuck there downgrading firmware what could it be? Originally it was on. 0400 I downgraded to 0300 using dji assistant but it won't downgrade any further

[2019-11-04 23:03:39] quad808 : M2? If so, you are on locked firmware courtesy of DJI.

[2019-11-05 00:32:01] dnacho : Yeah m2

[2019-11-05 00:32:22] dnacho : Oh man, that sucks. Are you guys working on a new nld version?

[2019-11-05 03:55:39] reaktor : @rgf8aerial does the HDMI out still work with 4.3.25? Also, I'm wondering what the 4G USB port is for..

[2019-11-05 09:26:38] dronepilot : Didn’t try HDMI yet on .25 version. And the usb port don’t no what’s for.

[2019-11-05 12:10:25] cs2000 : Yeah, we are :slightly_smiling_face:

[2019-11-05 12:28:04] reaktor : I found out the USB port can be used for charging phones AND for 4G USB sticks to provide internet when out in the field. Personally I just hotspot from my phone.

[2019-11-05 12:29:39] reaktor : Any chance you could test HDMI out on .25?

[2019-11-05 14:59:42] dronepilot : Yes. Will try to hdmi this week.

[2019-11-05 18:24:40] dronepilot : Any news on the new nld for the M2? @cs2000

[2019-11-06 03:31:14] bjoneseying : Autel Evo FCC mod by chance?

[2019-11-06 03:31:26] bjoneseying : Evo range is absolute rubbish in CE mode

[2019-11-06 09:44:25] cs2000 : @rgf8aerial i cant say too much, not being on the development team, plans and release schedules may change, but i hear there is some more support coming for the M2. Quite what shape this will come in, im not 100%.

[2019-11-06 10:12:26] dronepilot : Thanks @cs2000 hope some new stuff coming around.

[2019-11-06 10:14:40] cs2000 : no worries :slightly_smiling_face: I hope it is too. I know its frustrating things dont get dropped daily, there are times between releases, but as long as you all know, the entire NLD team works on NLD every single day to make it better for its current and future customers and thats totally not an exaggeration !

[2019-11-06 14:17:15] bobdole : some us gov agency grounded 800 drones because they don't want them to phone-home. if someone is sitting on something, maybe there is a way to get them to pitch in enough to release that something. its either that or let 800 drones depreciate into nothingness

[2019-11-06 16:34:11] dronepilot : That’s nice to here.

[2019-11-06 20:15:34] dronepilot : What kind os results should i get M2 boost over fcc standard rc?

[2019-11-06 20:56:25] bobdole : it isn't as big of a difference as if you ran an amplified panel antenna, but it is enough to be like "WTF HAPPENED TO MY RANGE... oh right, I didn't apply the boost mod on this yet"

[2019-11-06 22:20:20] cs2000 : And it totally depends on your flying environment. If you’re trying to fly in like central NYC, probably not a lot, the boost you get isn’t enough to overcome super congested air waves. In a normal residential area, usually it’s pretty decent :+1:

[2019-11-06 23:45:36] dronepilot : Nice will try to boost. Today i installed a Alientech Dual antena none amplified. Hopping to get some decent results.

[2019-11-06 23:53:35] dronepilot :

[2019-11-07 03:51:14] rickysuper : Alientech only Dual antenna work. Amplified antennas all failed on M2.

[2019-11-07 03:51:40] rickysuper :

[2019-11-07 10:02:14] dronepilot : @rickysuper just loved the dual set up. I did test the amplified 2.4ghz on the M2 and really didn’t like it. On this non amplified M2 set up are you getting best results on fcc or boost?

[2019-11-07 10:08:23] rickysuper : Amplified 2.4ghz Alentech only got 1km range and disconnected. 5.8ghz got 6-8km range same as CE with original antenna, Horrible result.

[2019-11-07 11:23:17] rickysuper : FCC, Honestly FCC is the major factor, with Alientech Dual antenna you may not grain much range difference compare with original antenna but more smooth and stable connection and image transmission, especially when in high interference environment.

[2019-11-07 11:59:41] dronepilot : That’s nice so i will not boost and keep it only on fcc. Yeah i didn’t find any difference on the range using stock antena and this dual set up. But i só less interference when the range started to grow.

[2019-11-07 12:01:12] dronepilot : I thought the same thing using Alientech 2.4ghz amplified on the M2. That’s why i backed up to the dual.

[2019-11-07 12:06:25] mel69hash : Did you use 2.4ghz antenna with 2.4ghz amp and also set the M2 signal to custom 2.4ghz. It should work fine though.

[2019-11-07 12:09:11] mel69hash : I am using 4Hawks XR Raptor which is compatible to M2 dual band and it's not that promising if used with dual band hence I use custom 2.4ghz and it works. Flying to 12 to 14km over shipped congested southern Anchorage here in Singapore

[2019-11-07 12:22:05] cantrepeat : reported

[2019-11-07 14:56:21] bobdole : you guys having issues with the alientech amplified antenna are in the same area.. i wonder if it is related

[2019-11-07 14:57:44] bobdole : my range is ridiculously increased with it, but my signal has different obstacles.. haven't tried it in overpopulated areas yet

[2019-11-07 14:58:44] bobdole : why not try using fcc mode + the amped antenna?

[2019-11-07 14:58:52] bobdole : hell i use 1.8w boost with it

[2019-11-07 15:14:06] 007 : Works fine with my p4p on nld fcc mode

[2019-11-07 15:23:21] rickysuper : Alientech 2.4Ghz amplified antenna works well with M1 and P4, only got bad result on M2, also P4Pv2

[2019-11-07 17:07:57] dronepilot : I am wondering if nld boost on the M2 makes any difference over fcc.

[2019-11-07 17:08:33] quad808 : Just to add more data....I tested the non-boosted dual Alientech on the Anafi...when left in auto, results were...well...SHIT. Worse than stock. When I forced 5.8 and picked a manual channel...way better than stock. Maybe that is the problem? Need to manually pick a channel for best results, even on the amped alientech??

[2019-11-07 17:11:46] quad808 : Also, if I remember correctly, on the Anafi, I hooked up boosted titan dronez 2.4g and the results were also bad, but just did quick testing...but it wasn't good. I don't know enough about radio tech to offer any clues

[2019-11-07 17:12:56] quad808 : don't use boost with a boosted antenna...bad things happen

[2019-11-07 17:14:55] quad808 : So, the bigger question for me is....what gives better reception with a drone that does dual, 5.8 and 2.4? Isn't 2.4 better for distance and 5.8 for close range??

[2019-11-07 17:21:23] pross : 2.4 is better for range, lower the frequency less power needed.

[2019-11-07 17:23:33] 007 : Yes, just on open areas

[2019-11-07 17:41:22] quad808 : From what I have read...yes, you could fry the amp, since it is not designed to handle the increased power of a already boosted signal. Anyone correct me if I am wrong.

[2019-11-07 17:57:06] fredmicrowave : You are right @quad808, plus creating distortion and spreading your signal everywhere.

[2019-11-07 18:05:20] bobdole : Any idea if there will be an ability to decrease the boost to an acceptable level for an amp in NLD using that slider?

[2019-11-07 18:07:15] quad808 : To be honest, I don't know.

[2019-11-07 18:08:34] pross : its just on or off and it ramps up the power as needed

[2019-11-07 18:10:53] fredmicrowave : You could always use a passive attenuator in the amp input, but in my opinion boost is already too much power. If more range is really needed, I think improving antennas would be a better solution...

[2019-11-07 18:57:46] bobdole : You are convincing me to get a 5.8ghz patch. Curious which one you would recommend?

[2019-11-07 21:19:37] dronepilot : But with this dual antenna doesn’t have amp inside. What do you think boosted or only fcc?

[2019-11-08 00:31:25] chipmangini : I run Titan Drones Switch, and have their Command Case (both 4w 2.4) as well as a FPVLR "Boobie" 4w boosted 2.4, and the difference is dramatic on my P4P. I can easily out distance my batteries. I use them mostly because I'm in the sticks ( literally in a valley in the country with no interference but a lot of tall trees) and depending on what antennas I use, I get major improvements over just running FCC-Boost with any of the same antennas. I was told by James at Titan Drones to make sure not to use their equipment boosted, as it will overdrive the amps causing distortion, and less range. Works for me.. .:+1::skin-tone-2:

[2019-11-08 00:48:45] mel69hash : I've boosted mine with 3W Sunhans dual amp on 4Hawks XR and the result was not as convincing.

[2019-11-08 01:49:41] quad808 : I can attest that James at Titan Drones is a great guy with unreal customer service.

[2019-11-08 02:29:11] fredmicrowave : @jacksphone Personally I cannot recommend one as I have not used them with the Mavic. But patch antennas are pretty good antennas, when correctly built. Unity gain is limited, but you can get phased arrays, for increased gain. They can be built to have linear, or circular polarization. If you have one that is linear, it should offer slightly more gain for the same configuration, but will need to be correctly oriented ( usually, vertically).

[2019-11-08 02:46:31] rickysuper : 2.4 or 5.8 depends on regions, in HK 2.4 is useless all the time all the area.

[2019-11-08 11:37:57] flymymavic : Question from a mate “Hey guys. random question of the day... i'm thinking about purchasing an NLD license for my mavic 2 pro just to get FCC but I'm getting mixed answers regarding the support for .0510 firmware.” Anyone got an answer

[2019-11-08 13:06:00] bin4ry : yes, no support

[2019-11-08 13:06:03] bin4ry : and no downgrade yet

[2019-11-08 13:06:10] bin4ry : if you are on 510 you are basically screwed

[2019-11-08 13:06:27] bin4ry : never ever use dji tools to update or downgrade firmware at all for m2

[2019-11-08 13:06:46] bin4ry : if you do, then your are screwed

[2019-11-08 14:31:15] flymymavic : @bin4ry according to the bird map, FCC via modded app and speed boost, is that right, and is there a safe version of 510 FW on NLD

[2019-11-08 14:31:40] cs2000 : Naa its wrong, theirs a misalignment on the table

[2019-11-08 14:32:20] cs2000 : If you happen to be on a firmware where youve applied FCC, such as 0100, then upgrade to 0510, that value sticks. But its not (AFAIK) editable directly on 0510 yet

[2019-11-08 14:32:39] cs2000 : And as Bin4ry has said, you cant downgrade from 510 or apply any other mods at this time

[2019-11-09 04:23:36] bobdole : I just flew Mavic 2 2.4ghz amped panel antenna between skyscrapers and boy did I wish I kept my 5.8ghz amped antenna.

[2019-11-09 18:02:40] dronepilot : <https://youtu.be/Eflz4zj4hmc> Tested today M2 + Alientech Duo + FCC + City Flight.

[2019-11-09 18:13:41] fredmicrowave : Between tall buildings circular polarization on one side should certainely help. Each time radio waves gets reflected on something, they change polarization...

[2019-11-10 04:30:16] bobdole : wat was range before?

[2019-11-10 04:44:53] rickysuper : If use twin batteries pack, should be much more than 7.5km

[2019-11-10 09:01:13] dronepilot : @jacksphone the range was great before but i was getting a lot o weak signal. Now with this set up got less interference flight.

[2019-11-10 09:04:12] dronepilot : @rickysuper I did 12km but landed 2km short because of a bad wind on the way back single battery.

[2019-11-11 00:28:06] andrwho25 : any trade offs using dual channel over only 5.8

[2019-11-11 00:36:13] bobdole : well.. the 5.8 pro has an amplifier, so there's that

[2019-11-11 00:39:44] andrwho25 : oh i mean in dji go settings

[2019-11-11 02:28:28] dronepilot : Go for the DUO Alientech very happy with this set up + fcc. <https://youtu.be/c7L91EFcp7A>

[2019-11-11 05:34:05] 007 : Hi guy's There is an issue with nld email, I get every single minute an email,

[2019-11-11 05:35:04] 007 :

[2019-11-11 06:12:49] bin4ry : @david077 @coldflake

[2019-11-11 06:55:24] coldflake : Thanks for the info! I will look into it asap

[2019-11-11 06:57:11] 007 : Thanks for everything bin4ry, coldflake

[2019-11-11 07:49:57] coldflake : I have disabled the forum for a short while until the problem gets sorted out

[2019-11-11 07:50:18] coldflake : We will get it fixed and the forum will be back up later today

[2019-11-11 07:51:05] coldflake : The spamming was unacceptable to say the least, so sorry for that

[2019-11-11 10:41:05] cantrepeat : damn russian brides at it again!

[2019-11-14 14:25:10] amanita : Is [nolimitdronez.com](http://nolimitdronez.com) down?

[2019-11-14 14:26:31] flymymavic : Down for me as well ?

[2019-11-14 14:26:39] flymymavic : @coldflake ?

[2019-11-14 14:26:51] coldflake : Yes that's me

[2019-11-14 14:26:59] coldflake : Yes, it will be up in a sec

[2019-11-14 14:27:08] coldflake : Someone forgot to pay the isp :(

[2019-11-14 14:37:30] flymymavic : :joy::joy::joy::joy:

[2019-11-14 14:45:54] flymymavic : It’s working now cheers @coldflake

[2019-11-14 14:46:16] coldflake : Yes cheers guys

[2019-11-14 14:46:21] coldflake : What a mess lol

[2019-11-14 15:29:11] bobdole : wtf.. use boost. yeah its worth it

[2019-11-14 15:30:37] rickysuper : only Duo is working for me and my friends. Alientech pro 2.4g and 5.8g both not work

[2019-11-14 17:45:34] d95gas : @coldflake Evening Oh mighty one :slightly_smiling_face: any news on the next update, anything exciting for us poor guys on MP1 ? On the subject of "Other" drones being incorporated..... Anything for the Anafi ? or is that a dead duck...... Thanks

[2019-11-14 17:53:28] coldflake : We are working with implementing new birds like the Anafi. For us there is no dead ducks. V2 will include custom FC and all that good stuff for M2. FCC mode for Mavic Mini is also on its way.

[2019-11-14 17:59:31] d95gas : anything for us old fliers on MP1 ...... Anafi stuff would be good, and positive bring in a load of new customers for NLD

[2019-11-14 19:22:21] flymymavic : @d95gas what else can they do, the MP1 is already fully cracked and FCC’d mate

[2019-11-14 19:23:16] d95gas : custom FC made easy :wink:

[2019-11-14 19:23:39] d95gas : and you never know what tricks those guys have up their sleeves :slightly_smiling_face:

[2019-11-14 19:41:30] bin4ry : custom fc love will come to m1 in v2. coldflake mistyped there. we tested it and did some defaults we find good. will start out with defaults and plan is to make it customizeable through the gui later on

[2019-11-15 08:54:37] pingspike : > FCC mode for Mavic Mini is also on its way. :man-bowing:

[2019-11-15 11:05:10] oakley75 : You guys recommend staying on mini firmware 000 or going to 200? Supposed good things to gain, but really want to maintain maximum (future) compatibility with NLD and not shoot myself in the foot ya know. Has anyone updated to 200 and is the option to downgrade back to 000 still there?

[2019-11-15 11:10:03] cantrepeat : As we have seen with the M2, in my opinion, it's best to stay on the lowest possible firmware until NLD says otherwise.

[2019-11-15 11:34:55] oakley75 : @catalinaskirace any anti rollback in it?

[2019-11-15 11:35:06] oakley75 : (fyi just changed my name back to my original name from the og 2017 days)

[2019-11-15 11:35:36] cs2000 : Agreed, in the unknown land we're currently in, stay as low as possible. You can always upgrade, but downgrades may not be possible, depends how the field plays out

[2019-11-15 11:35:46] cs2000 : There is antirollback in the firmware

[2019-11-15 11:36:19] cs2000 : its enabled already, downgrading to 0000 from 0200 would require anti rollback bypass

[2019-11-15 11:44:09] oakley75 : Done deal, thanks for the reality slap. Needed that. 200 just has us jealous of the supposed improvements ha. Moving on...

[2019-11-15 12:09:18] cs2000 : Have you seen any firmware release notes for any MM firmware? i havent found any yet.

[2019-11-15 13:17:47] oakley75 : Just the one about 200

[2019-11-15 13:18:23] oakley75 : <https://dl.djicdn.com/downloads/Mavic_Mini/Mavic_Mini_Release_Notes_en.pdf>

[2019-11-15 17:45:44] cantrepeat : OK, FYI I'm Doctor Rockso in real life

[2019-11-16 15:06:47] bobdole : i dont think the initial mavic mini firmware is safe - here's a youtube guy watching his go down <https://youtu.be/es8aub2Ahao?t=613>

[2019-11-16 15:31:02] bin4ry : it shows beta firmware in the video

[2019-11-16 15:31:11] bin4ry : so i would not compare that to release firmware

[2019-11-16 16:18:08] bobdole : i hear that, but the retired magical QA sage in me tells me that the circumstances/frequency of such behavior is so uncommon that DJI might wait and see on that fix

[2019-11-16 16:49:31] oakley75 : The 200 update does seem pretty significant. I've personally not heard/read of any mention that something nefarious is in 200 that's not on 000... That said, still on 000 myself

[2019-11-16 18:12:30] the_lord : For MM FW version 0000 there is bug related to WiFi region In some regions it will not connect back if its disconnected

[2019-11-16 23:33:25] bjoneseying : When I powered mine up, pretty much locked itself until I updated to 200. They usually aren't that draconian unless its something catastrophic.

[2019-11-16 23:37:07] bjoneseying : Heard there were some major telemetry bugs with .000

[2019-11-17 01:43:46] oakley75 : Yeah aircraft locked upon initial activation. Forced to go 200. That being said, the video quality is piss poor. Damn.

[2019-11-17 20:12:59] pingspike : @reoak are you CE?

[2019-11-17 20:46:27] oakley75 : Fcc

[2019-11-18 06:14:42] bjoneseying : Video is locked to auto on the MM with no adjustments possible

[2019-11-18 06:14:56] bjoneseying : Made lots of people cranky

[2019-11-18 09:04:38] cs2000 : @jacksphone Id agree personally. the .0200 update does bring a lot of features and improvements. My comments about "stay on .0000" were in reference to the fact that lower firmware is always more likely to be hacked up then newer firmware. Until we know the landscape, if you can, its best to stay low.

[2019-11-18 09:12:54] coldflake : @bjoneseying Something for NLD to implent then as I assume the duml cmds are still valid to some extent

[2019-11-18 10:32:03] bjoneseying : That would get quite a few people interested

[2019-11-18 10:32:25] bjoneseying : People want manual control + RAW photo capability presumably for commercial work

[2019-11-18 10:39:43] pingspike : RAW would be great, just gives us more room for editing in post

[2019-11-18 10:45:51] bjoneseying : Do you get RAW using Spark with Litchi?

[2019-11-18 10:46:04] bjoneseying : just wondering if it could be done via SDK

[2019-11-18 11:24:19] oakley75 : It looks like the ol low bitrate issue mostly I'd say. Image looks lovely sitting still, but once you start to move... It all falls apart. Not being nitpicky, hell I know where this mini sits in the lineup, but I feel it's unacceptable still.

[2019-11-18 19:07:56] quad808 : @jacksphone Do you like the boosted alientech better than the Titan setup??

[2019-11-18 19:43:37] bobdole : yeah... i was disappointed by the titan setup. it was nice to be able to slap on different antennas, but it was still too bulky and never as effective

[2019-11-18 20:04:02] quad808 : Hmmmm.....now I am thinking of maybe getting it....since you have both, what do you think? Would you rather use the Titan or the alientech for most of your flying?

[2019-11-18 20:09:29] bobdole : alientech hands down

[2019-11-18 20:11:01] quad808 : k, thanks bro...will need to figure out if I really need it or not...

[2019-11-19 01:40:27] mel69hash : Hv you all tried Nanosync. My MP was on it all along for hard coded breaching range. We hv a bunch of pilots here in Singapore using Alientech duo which I think was amp boosted. They were shocked to see Nanosync with 3W sunhans amp could fly very low with strong signal at 3 to 4 bars at a distance of 3 to 4.5km before the signal started to blink. I've flown non boosted Nanosync over water with plenty of anchoring ships and break the hard coded range. My buddy had done that on numerous occasions with the same set up and had a very good result on stock FW. Give it a shot and you can see how compact and powerful is the Nanosync. I've recently used it on M2P on single band and had a very good result too. I've tried the Sparkwave duo (slightly bigger and thicker) which according to Itelite (manufacturer) is compatible for M2P but result was not to my expectation. I'm gg to stick with the Nanosync for both AC. I've also used 4Hawks XR before trying the Nanosync on my M2. Quite promising too but not for low flying.

[2019-11-19 07:40:52] lolo780 : I use a nanosync on my mp1 setup. Great signal at 18km.

[2019-11-19 09:31:54] nublish101 : erm

[2019-11-19 09:32:04] nublish101 : havign issue with nld and dji app

[2019-11-19 09:32:28] nublish101 : i download tha fresh no secneo 4.1.22 i click browse to add it to patch it

[2019-11-19 09:32:42] nublish101 : but it throw an error sayioogn it needs a clean sji apk

[2019-11-19 09:33:10] nublish101 : oh now it decides to work

[2019-11-19 09:35:41] elintnl : No, no raw for Spark in Litchi, test it yourself <https://drive.google.com/file/d/1pyrsdZp8z3lrQKaKn08V7fvexZJKBMgt/view?usp=sharing>

[2019-11-19 10:51:06] dronepilot : For me no issue Alientech DUO fcc + boost M1 and M2 standard rc. Just received antenna conversion kit for smart controller.

[2019-11-19 11:30:35] chipmangini : !apk

[2019-11-19 11:31:52] chipmangini : @nublish101 ^^^^^^^^

[2019-11-19 16:17:02] dronepilot : Anyone happy with the range on smart controller using nld fcc?

[2019-11-19 16:17:16] dronepilot : Stock antenna.

[2019-11-19 21:27:04] hans112 : This one ? <https://www.amazon.com/ITELITE-ITE-DBS-NANOSYNC-Extender-PLATINUM/dp/B079G5XG35>. Any other modifications?

[2019-11-20 19:09:02] c.binetti : How about the 4Hawks? I have one with the MA and got more distance than battery and that straight over a city with a lot of interference :-)

[2019-11-20 22:23:46] guson : Any idea if latest version is safe to install or if it will do harm to the nld/superpatcher features currently being enjoyed such as FCC mid

[2019-11-20 22:31:45] rickw001 : shouldn't effect superpatcher

[2019-11-21 00:00:38] dronepilot : No problem at all been using since released date. Platinum with SP and M2 with NLD.

[2019-11-21 08:31:04] cs2000 : Naa, you should be fine

[2019-11-21 09:12:01] b3019199 : Does NLD support offline activation of the M2?

[2019-11-21 10:44:39] cs2000 : No mate sorry

[2019-11-21 10:45:01] b3019199 : No worries, thanks for the quick response :slightly_smiling_face:

[2019-11-21 10:46:14] b3019199 : Need the root exploit for that huh?

[2019-11-21 10:47:34] cs2000 : well, we have that, so yes, but that isnt the sticking point. IOn the spark, it was a quick DUML command with the date and time. With M2, its signed by DJI's servers and hash'd to verify the response is from DJI, which we cant spoof :confused:

[2019-11-21 10:47:46] cs2000 : never say never of course, but right now, thats the situation :slightly_smiling_face:

[2019-11-21 10:48:21] b3019199 : Wait, you have a root exploit for M2? Thought there was like a 5k bounty on that

[2019-11-21 10:49:02] cs2000 : Of course! That was how NLD got the M2 added. root is step 1 of getting in, steps 1-99999 are the difficult ones :joy:

[2019-11-21 10:49:13] cs2000 : bounty was paid too :slightly_smiling_face:

[2019-11-21 10:49:34] b3019199 : Makes sense

[2019-11-21 10:50:18] b3019199 : So they use like a HMAC for the activation?

[2019-11-21 10:51:28] cs2000 : CMAC, but yeah

[2019-11-21 10:52:12] b3019199 : Never heard of that before, time to do some reading

[2019-11-21 10:52:19] b3019199 : Thanks for your time bud :slightly_smiling_face:

[2019-11-21 10:52:57] cs2000 : Drop into og_playground, recent discussion is about the Mavic Mini, but it activates the same way

[2019-11-21 10:53:10] b3019199 : Cheers

[2019-11-25 03:28:55] cat.db : no news？

[2019-11-26 08:36:42] reaktor : Only flown a few times with new Smart Controller.

[2019-11-26 08:37:36] reaktor : A ton more messages regarding entering flight zones, etc. than when I was using my phone.

[2019-11-26 08:38:14] reaktor : Using NLD FCC mod I only got 3km flying towards harbour.

[2019-11-26 08:38:59] reaktor : I got 4.5KM flying towards city, which is a WiFi saturated zone, so I was surprised by that.

[2019-11-26 08:39:28] reaktor : So 4.5km is my maximum so far with Smart Controller.

[2019-11-26 09:03:42] dronepilot : Nice thanks.

[2019-11-29 00:24:05] dronepilot : Any news to downgrade M2 .100 firmware?

[2019-11-29 09:17:07] cs2000 : M2 .100 has always been downgradable using NLD

[2019-11-29 09:17:26] cs2000 : Downgrading to it has been the issue on .300, 0400 and .510 however

[2019-11-29 12:42:04] dronepilot : Any news around on how to downgrade from .300 +?

[2019-11-30 13:53:07] cs2000 : Sadly not, DJI dropped anti rollback in that too, unless you updated from NLD which doesn’t have anti rollback on its version of .0300

[2019-11-30 18:12:57] dronepilot : I did update bye mistake though Dji Go 4 app now can’t backup anymore. So sad.

[2019-12-01 01:10:28] cantrepeat : bazinga!!

[2019-12-01 02:24:23] dronepilot : Unfortunately. Big mistake really pissed at me.

[2019-12-02 07:45:06] trollspeed : Any news for MA? :)

[2019-12-03 02:42:06] bjoneseying : IT'd be cool if the Mavic's could be altered to crash aeroscope with NLD rather than just spoofing it

[2019-12-03 08:38:19] cs2000 : If the designed it well, it should be able to protect against garbled or malicious data coming back to it, but something to bear in mind

[2019-12-03 08:54:07] bin4ry : kevin showed already that aeroscope can be jammed <https://www.youtube.com/watch?v=EdRvaTlKJIA>

[2019-12-03 09:18:17] bin4ry : if you want to fuck with aeroscope this is the way to go, build a throwie based on esp8266 like kevin showed and keep it with you all the time / drive it around in the car etc.

[2019-12-03 09:18:33] bin4ry : so just make aersoscopes useless

[2019-12-04 00:07:39] cantrepeat : I bet there is a market for aeroscope jammers

[2019-12-04 00:48:15] dronepilot : No nld new stuff?

[2019-12-04 10:39:34] cs2000 : You can build one for about 10$. Im waiting for the bits to arrive, but also having issues compiling that code

[2019-12-04 10:43:12] bin4ry : maybe we should do a small portable jammer and dropship it ^^

[2019-12-04 10:51:28] cs2000 : You could make it tiny really. my setup will be very simple ESP8266 plugged into a USB programming board (because it has a convenient USB A plug on it), plugged into a powerbank. Will keep my safe whilst flying at least!

[2019-12-04 11:05:48] bin4ry : keep in mind that the example code only has a static spoof

[2019-12-04 11:05:56] bin4ry : you would want a more dynamic one

[2019-12-04 11:06:16] bin4ry : maybe some nice drawing or such

[2019-12-04 11:06:30] cs2000 : Yeah, noticed that line :slightly_smiling_face: #SkyPeen right :joy:

[2019-12-04 11:06:47] bin4ry : :stuck_out_tongue:

[2019-12-04 11:07:38] cs2000 : SO wish Kevin was back around these parts :wink:

[2019-12-04 16:40:18] bobdole : what kind of reaction to a carefully advertised aeroscope jammer would there be? besides the holier-than-thou noise

[2019-12-04 16:41:04] bobdole : basically negate the entire aeroscope market with a $10 piece. what would the lawyers say

[2019-12-04 16:45:38] bin4ry : just fuck them off and make the areroscopes useless. no other gain than that

[2019-12-04 16:45:44] bin4ry : show that the technology is worthless

[2019-12-04 16:47:25] bobdole : i really really hate lawyers

[2019-12-04 16:47:41] bin4ry : ^^

[2019-12-04 16:47:53] bin4ry : i am just playing ideas

[2019-12-04 16:47:59] bin4ry : not saying anyone should do it

[2019-12-04 16:47:59] bobdole : maybe keep it mysterious and sell it for bitcoin.

[2019-12-04 16:48:19] bobdole : it would look good on a resume and the news

[2019-12-04 16:49:08] bin4ry : :smile:

[2019-12-04 17:01:47] cs2000 : god, i can see the news articles now...

[2019-12-04 20:51:20] quad808 : I want one. Build it and they will come...in DROVES! NLD should build and sell, as long as it isn't illegal, why not?

[2019-12-04 23:42:45] cantrepeat : At some point it will be illegal. Think seat belts, motorcycle helmets, gun laws, all that shit.

[2019-12-05 01:55:34] cat.db : nld is still have no new version ？

[2019-12-05 09:40:05] cs2000 : Nothing to be released yet, otherwise you would have seen an update :wink:

[2019-12-06 17:39:20] exumpw : esp8266 throwie is sending WiFi droneid packets, right? I think aeroscope might be able (with update) to filter WiFi packets and still detect Ocusync drones.

[2019-12-09 16:15:04] cs2000 : NLD forums are back guys :slightly_smiling_face:

[2019-12-09 17:13:22] originaldobo007 : How about altitude for M2 or NLD 2.0. More important than forums, I would think...

[2019-12-09 17:14:36] cs2000 : And more difficult you'd think to, no?

[2019-12-09 17:17:00] originaldobo007 : Of course. Which is why I’d understand it taking a year and a half. But it looks like it won’t be supported since an M3 is likely in the next month or 2.

[2019-12-09 17:18:15] cs2000 : We're doing all we can, trust me. I dont see ANY other alternative, free, paid or some random Chinese dude, so that shows how difficult the M2 is.

[2019-12-09 17:18:33] cs2000 : NLD 2.0 is coming too. Things take time, longer than you can imagine without any knowledge on the matter

[2019-12-09 17:24:35] originaldobo007 : Understood. And I truly thank all of you for all your efforts.

[2019-12-09 17:25:12] cantrepeat : @originaldobo007 If it's that simple then get to coding guy.

[2019-12-09 17:31:57] bin4ry : altitude won’t come anytime soon.

[2019-12-09 17:37:10] bin4ry : and it’s completely different people bringing the forum up again and trying to exploit the drone

[2019-12-09 17:37:52] bin4ry : so the efforts don’t go into the other stuff instead, don’t worry

[2019-12-09 18:10:59] dronepilot : nfz newer firmware will make the M2 a blast.

[2019-12-09 18:20:54] fredmicrowave : Interesting how they were able to lock altitude more securely than nfz...

[2019-12-09 18:22:17] originaldobo007 : Nfz is removed on the latest fw with NLD?

[2019-12-09 18:24:23] bin4ry : nfz is removed in nld on the firmwares which are in the FirmwareMap :wink:

[2019-12-09 18:27:01] originaldobo007 : That’s what I thought, the latest firmware does not support NFZ removal.

[2019-12-09 18:27:24] originaldobo007 : So it might be locked as securely as altitude.

[2019-12-09 18:27:34] bin4ry : you understand that completely wrong

[2019-12-09 18:27:55] bin4ry : let me try to explain

[2019-12-09 18:28:07] bin4ry : but i break it down in a not 100% correct way

[2019-12-09 18:28:14] bin4ry : Altitude gets locked from FC

[2019-12-09 18:28:24] bin4ry : NFZ from Linux System in 0801

[2019-12-09 18:29:02] bin4ry : to remove NFZ all you need is root on 0801 and a way to keep your mods applying on a reboot

[2019-12-09 18:29:21] bin4ry : thats what is possible on the early firmware, on later firmwares one of the steps is missing

[2019-12-09 18:29:39] bin4ry : to remove altitude there is more needed, first you need access to the FC and TZ , then you can do the mods

[2019-12-09 18:29:51] bin4ry : so it is just in a different part of the drone

[2019-12-09 18:30:20] originaldobo007 : Ahhh got it. So it’s much more likely that NFZ removal is going to come in the not too distant future

[2019-12-09 18:30:23] originaldobo007 : ?

[2019-12-09 18:30:44] bin4ry : it comes when and if the last puzzle is solved

[2019-12-09 18:30:53] bin4ry : :smile:

[2019-12-09 18:31:11] originaldobo007 : Gotcha

[2019-12-09 18:31:43] originaldobo007 : It would be great if they didn’t update too much between this and the M3, so the same exploits will eventually work on that series

[2019-12-09 18:33:50] originaldobo007 : Quick question - does NLD work on the P4P2 - that's not on the Birdmap at all

[2019-12-09 20:00:25] quad808 : 2.0? nope. The problem with DJI is once NLD releases an exploit...guess what happens? Yep, it gets patched in the next firmware. !DJI spies everywhere

[2019-12-09 22:42:58] fredmicrowave : Can I send my FC board to NLD to mod it, far away from Dji eyes? :grin:

[2019-12-10 00:03:19] originaldobo007 : Wait a sec/ I just saw the superpatcher works with P4P2. Why doesn’t NLD support it if sp supports it?

[2019-12-10 05:08:35] bin4ry : we have added custom fc support for our internal tests and will release it with a future version

[2019-12-10 05:12:11] bin4ry : and why the f.... are you so aggressive?

[2019-12-10 05:16:38] bin4ry : please also keep in mind that SP itself doesn’t support shit, brett just took @mathieu.peyrega s work and @jezzab s and some more and packed it together. he doesn’t even understand what he is doing, and also refuses to remove @jezzab DUMLdore from his script, even if asked so. so let me tell you, we have it in testing but there is more to think about than just flashing the FC like and idiot, and that’s what we try, we try to make it safe and convenient to use, without just stealing the software of others to work for us in the background! this somehow takes a little bit more time than bretts approach

[2019-12-10 09:37:32] cantrepeat : @originaldobo007 because fuck you

[2019-12-10 09:39:47] cantrepeat : @jacksphone 100x mostest stupidest

[2019-12-10 15:51:03] elintnl : NLD down?

[2019-12-10 17:50:32] d95gas : seems to be OK here in the UK

[2019-12-11 09:21:50] cs2000 : @elintnl it did go down for around an hour yesterday, we shouted at the server and it came back :smile:

[2019-12-11 09:32:22] elintnl : thanks for feedback

[2019-12-13 08:01:53] trollspeed : Once again any news on Mavic Air?

[2019-12-13 10:34:20] cs2000 : Soon, we will have something :slightly_smiling_face:

[2019-12-13 12:33:05] bin4ry : no

[2019-12-13 12:33:20] bin4ry : air we won’t

[2019-12-13 12:33:24] bin4ry : mini yes

[2019-12-13 13:20:54] trollspeed : Khm :/ no fcc and no nfz, waste of money :(

[2019-12-13 13:45:53] cantrepeat : Hell, if I can avoid activation and registration on the mini it's worth dough to me.

[2019-12-13 14:13:21] cs2000 : My mistake, read before engaging fingers

[2019-12-13 22:18:42] dronepilot : Will we have some nfz love on the M2 .300 fw+?

[2019-12-13 22:19:03] dronepilot : or a roll back to .100?

[2019-12-14 01:47:21] originaldobo007 : Nope. No altitude or nfz on later fw for M2.

[2019-12-14 10:57:27] cantrepeat : @originaldobo007 how the hell to you know what "will" or "will not" be available from NLD in the future?

[2019-12-14 11:00:15] cantrepeat : If I was @coldflake I'd give you a refund on NLD and block your entire subnet mask because fuck you!

[2019-12-14 16:18:11] originaldobo007 : Ok. Well- I’ve heard that from multiple people but that’s ok- get mad at me but I’ll still be proven right. Oh wait- what was that? If you read above a couple days, you’ll see that alt is coming no time soon. Lastly, I personally helped coldflake exploit the DJI unlock process for his M2 and unlocked the altitude on it for him. So - f&$k off. You’ve been pwned- unless you wanna say that alt and NFZ for M2 later fw are coming soon. Which you can’t. Because they aren’t.

[2019-12-14 17:36:14] dronepilot : @originaldobo007 any way to downgrade M2 firmware back to .100? I’m on .300 new firmware.

[2019-12-14 18:23:52] quad808 : Lets just say this. If a person can create the lock in software, another person can always figure out how to unlock it. It's just a matter of time and talent. Never say N E V E R, because you don't know. It was also said that the Mavic Pro couldn't be unlocked past .0700 firmware

[2019-12-14 18:29:40] quad808 : I will also say this.... If anyone of you think this is easy, take a step back. How many companies are even unlocking DJI drones and that includes individuals...ummm... WORLDWIDE? HMMMMM??? I will wait while you tally it up on one hand with fingers missing. 'nuff said. Carry on. If you have the talent, roll up your sleeves and help...if not, you know what to do.

[2019-12-14 20:33:06] bin4ry : @originaldobo007 you did help to get the unlock that is right, sadly this is not portable to other drones. It is no replay attack ... still thanks for the data, like i said in private messages a long time ago. Just in general there won’t be any statements about internal developments as this was bad in the past, but there is absolutely no plan to abandon m2 in contrary, we are working extremely hard to get newer firmwares supported. However Mini will get some support very soon too. Custom FC are something we are doing in v2 as it will require a new gui, so we decided to put this into v2. it will support all drones which are capable of custom fc. Hope this answer is good for you, but your passive aggressive way to „ask“ does not help. i am sorry that somehow you are frustrated with nld, but exploiting is nothing you can give guarantees that it will work. Like the altitude unlock you helped with, the unlock is only valid for this one drone and it’s not portable as there is much more to it to make the drone eat it, the much more is what is just impossible currently, however it helped a lot to understand the process for the time being new drones. -Bin

[2019-12-15 00:15:31] originaldobo007 : @bin4ry- that is fair. I understand. I simply said one thing which was factual. I said NFZ and altitude unlock are not coming to newer fw in the M2 series in NLD anytime soon. This is not passive-aggressive. I never claimed it was easy. As to @quad808’s point- it obviously is not. Thus, my statement that NFZ and altitude aren’t coming to NLD anytime soon to support later M2fw versions is absolutely 100% correct. @catalinaskirace attacked me for saying something which you guys literally just acknowledged. If anything, he owes an apology.

[2019-12-15 00:26:05] cantrepeat : @originaldobo007 bullshit, you didn't say anything about Soon™

[2019-12-15 00:27:00] cantrepeat : The conversation wasn't about soon, go read what you wrote without edits

[2019-12-15 00:27:30] cantrepeat : Will we have some nfz love on the M2 .300 fw+? [5:19 PM] or a roll back to .100?

[2019-12-15 00:27:43] cantrepeat : **StanLee** [8:47 PM] Nope. No altitude or nfz on later fw for M2. (edited)

[2019-12-15 00:28:36] cantrepeat : questions asked here in the NLD channel are better left to the people that run it.

[2019-12-15 00:29:06] cantrepeat : you don't have inside information, do you? no. so you can't say what will be offered by NLD in the future

[2019-12-15 00:29:20] cantrepeat : stating what is currently available is something else.

[2019-12-15 00:32:48] originaldobo007 : Oh- so you are claiming that you are simply stating that at “some” unidentified point (but not soon) there “may” be nfz and alt on the M2 later fw. But you are acknowledging it’s not anytime soon. You are ridiculous. Is that what you think @rgf8aerial meant? He was asking for something many months out (if ever)? Stop twisting yourself into knots dude. It’s not coming anytime soon. That’s a fact and it is acknowledged.

[2019-12-15 00:33:20] cantrepeat : don't speak for others

[2019-12-15 00:33:24] originaldobo007 : My God. Your logic is on the level of a Republican.

[2019-12-15 00:33:34] originaldobo007 : They ALREADY spoke for themselves dude.

[2019-12-15 00:34:53] cantrepeat : My God. Your logic is on the level of a Republican. <--------------- what? who gives a shit about politics? Got some boomer jokes in there too? idiot

[2019-12-15 00:35:18] originaldobo007 : Are you a boomer? That might explain your generalized lack of logic in this dispute.

[2019-12-15 00:36:08] cantrepeat : might as well toss in something about the car I drive as well

[2019-12-15 00:36:37] originaldobo007 : Well that’s not as demonstrable as your complete lack of grasping what I said above.

[2019-12-15 00:36:37] cantrepeat : how about my carbon foot print?

[2019-12-15 00:37:17] cantrepeat : yeah, running your mouth about the forums, popping off about SP sure guy

[2019-12-15 00:37:50] originaldobo007 : Again- your carbon footprint isn’t as obvious as how ridiculous your comment was.

[2019-12-15 00:38:17] originaldobo007 : I made ONE comment ONCE that SP supported P4Pv2.

[2019-12-15 00:38:34] originaldobo007 : Dude- when in a hole- stop digging.

[2019-12-15 00:38:36] cantrepeat : **StanLee** [1:30 PM] Ahhh got it. So it’s much more likely that NFZ removal is going to come in the not too distant future

[2019-12-15 00:39:08] cantrepeat : Boomers boom'in!!!

[2019-12-15 00:39:37] originaldobo007 : No- what I said- and let me clarify this for you: NFZ and alt in later M2 fw isn’t coming anytime soon. That is a fact. Got it now?

[2019-12-15 00:41:28] cantrepeat : Which is it? you've said both. Clearly you don't know what is or isn't coming from NLD in the not too distant future

[2019-12-15 00:41:34] cantrepeat : which is the point.

[2019-12-15 00:41:48] cantrepeat : how can you know something NLD doesn't even know?

[2019-12-15 00:42:08] originaldobo007 : Dude- the geritol needs to kick in. I’ll say it again: NFZ AND altitude on later M2 fw isn’t coming anytime soon. NLD have said that as well.

[2019-12-15 00:42:31] originaldobo007 : Shall I say it a fourth time for you?

[2019-12-15 00:43:19] cantrepeat : yeah sure

[2019-12-15 00:44:23] originaldobo007 : It’s ok. I think everybody else understands the point.

[2019-12-15 00:44:31] originaldobo007 : Boomer

[2019-12-15 00:44:51] cantrepeat : Booming!

[2019-12-15 00:45:18] cantrepeat : When I was younger it was just "old fuckers"

[2019-12-15 00:45:40] cantrepeat : Boomer has a better ring so at least we can thank you dipshits for that.

[2019-12-15 00:51:20] cantrepeat : Oh you said that I owe you an apology, because fuck you!

[2019-12-15 14:44:45] originaldobo007 : I said you owe one - but I don’t expect to get one from you because you are a douche who was just pwned.

[2019-12-15 18:39:48] cantrepeat : so 1337 you are.

[2019-12-21 00:39:50] dronepilot : Will nld support fcc on Mavic Mini model MR1SS5?

[2019-12-23 10:17:14] wj7106 : Christmas is coming. Is there a surprise release for NLD?:joy:

[2019-12-23 16:11:14] bobdole : !DJI troll detected

[2019-12-25 11:41:30] reaktor : Hi NLD. I recently purchased a Smart Controller to use with Mavic 2 Pro with FCC mod.

[2019-12-25 11:42:28] reaktor : My issue is I'm only getting 1km range with Smart Controller but 4km using standard controller.

[2019-12-25 11:43:47] reaktor : Are these Smart Controllers just crap or not working with the FCC mod?

[2019-12-25 11:44:28] reaktor : Any advice is appreciated. Both were tested again today in the same location.

[2019-12-25 12:42:14] bin4ry : i am not sure, but i remember that there was talk about the smartocntrollers in general are not that good in range than the usual controller. Did you align the antennas correct? maybe someone @channel with a smartcontroller can shed some more light into it, i don't own one myself.

[2019-12-25 12:43:51] rickysuper : Smartcontrol antenna pointing is different to usual controller.

[2019-12-25 13:00:39] reaktor : Stupid DJI Smart (but piss weak) Controller

[2019-12-25 14:28:52] dronepilot : Smart Controller not good on range did try fcc and boost nether got the results i get wit standard rc I even changed the antenna to Alientech SC conversion kit wit duo not amped. At the end sold SC and bought a crystalsky 5.5 to use with stander rc.

[2019-12-26 11:13:17] bjoneseying : mine goes OK i think, just antenna orientation is awkward.

[2019-12-27 07:36:43] ben_lin : Is there a specific reason that NLD is not doing M2 later fw?

[2019-12-27 10:21:05] cs2000 : Yes, one of the exploits was patched in later firmwares, simple as that :slightly_smiling_face:

[2019-12-30 00:34:29] dronepilot : Nld down?

[2019-12-30 01:42:22] czokie : I will hit up @coldflake directly

[2019-12-30 05:50:43] coldflake : Fixed and thanks for the heads up @czokie

[2019-12-30 12:17:12] nopcode : But can't you modify the new firmware before flashing?

[2020-01-02 16:54:59] flymymavic : !apk

[2020-01-03 02:17:27] mel69hash : May I know if NLD is tied to AC serial no. I've drowned my M2P which was on NLD and getting a used replacement and would like to use NLD for some fun. Would j hv to purchase again. Thx

[2020-01-03 02:32:12] cantrepeat : Yes it is set to the AC you registered it on.

[2020-01-03 02:33:03] cantrepeat : <https://nolimitdronez.com/faq>

[2020-01-03 02:33:55] cantrepeat : bottom of the page

[2020-01-03 11:01:01] mel69hash : Thx buddy. Guess I hv to purchase a new license.

[2020-01-07 01:44:08] mel69hash : NLD server down? I receive error while starting the application.

[2020-01-07 02:14:11] cantrepeat : did you try restarting it?

[2020-01-07 02:43:03] quad808 : server down for now

[2020-01-07 11:20:47] cs2000 : Should be back up. Fell over late, around 1AM UK time so nobody was around to give it a kick, sorry for the downtime

[2020-01-07 13:14:01] dronepilot : NLD down no update been missing you guys

[2020-01-08 10:09:51] cs2000 : Its up right now. Coldflake has been working on the servers though so perhaps was down for a very short time, but i dont see it.

[2020-01-10 10:51:15] dronepilot : How to downgrade M2 RC .100? Nld app just say checking firmware.

[2020-01-10 11:22:10] cantrepeat : you can't

[2020-01-10 11:24:06] dronepilot : Only DUML 3.15 Beta did the rc downgrade just just now thanks guys.

[2020-01-10 11:24:12] dronepilot :

[2020-01-10 16:06:34] amanita : Is NLD site down? The webpage does not open.

[2020-01-10 16:42:06] bin4ry : up

[2020-01-11 00:05:29] dronepilot : Hi guys i have a question, any one from CE location with nld boost on the Mavic 2 notice any difference combined with fake gps having the location o fcc usa?

[2020-01-11 02:47:10] rickysuper : Yes the signal was echanced and stronger than FCC but not so obvious as FCC was enough for me . I'm in CE region and it's no need to using combine with fake GPS.

[2020-01-11 03:37:58] bjoneseying : I dont think fakeGPS ever worked on Ocusync, only wifi drones like Mavic AIr and Spark

[2020-01-11 11:35:49] rickysuper : FakeGPS should work on M2 but under complex procedures and restricted conditions.

[2020-01-11 18:43:27] dronepilot : Fake gps works perfect on the M1 and M2 the question was using combined with nld fcc + fake gps if together the signal is stronger.

[2020-01-13 09:38:27] dronepilot : Received 5 nld e-mail this night all of them where the same.

[2020-01-19 20:21:45] flymymavic : Can someone give the website a kick please @coldflake @quad808

[2020-01-19 20:22:18] flymymavic : @bin4ry

[2020-01-19 21:19:31] coldflake : Kicked in the butt very hard

[2020-01-19 21:19:37] coldflake : Thanks for letting me know

[2020-01-19 21:19:48] coldflake : Just landed and had no internet on the flight

[2020-01-19 22:31:14] flymymavic : Cheers mate

[2020-01-19 23:40:02] mel69hash : Anyone experience the non downgradable fw 0.0300. I've managed to get an M2 with 0.0300 fw but was unable to downgrade using NLD. Dumldore 3.20 too went pass the downgrade process in a brief. Tot fw 0.0300 was all along downgradable. Any advice.

[2020-01-21 12:36:18] trollspeed : Once again will there be any uodates on mavic air?

[2020-01-21 17:18:54] bobdole : yeah i think a new one is coming out soon mavic air 2

[2020-01-21 17:20:28] bobdole : 360 obstacle avoidance, quieter, longer flight time.

[2020-01-21 20:51:22] quad808 : @trollspeed Let me ask you a question. Why DO YOU think there has been limited mods for the Air?

[2020-01-23 17:26:43] fstephan1 : The P4 V2.0 is is pretty much the same as the Mavic 2. If the Mavic 2 done, the P4 pro V2.0 is done too. The v01.00.22.00 ist hacked allready (NFZ and high Limit): Download Link: <https://b24-qcip0e.bitrix24.de/~Rkvq2> , Need flashed with DUMLdore. FCC mod can done with <https://github.com/jkson5/jkson_fcc_mod> If you had Firmware v01.00.50.00 on your bird, dumbdore is blocked. The v01.00.50.00 Firmware aktivate the identify transponder too. I think NLD will support the P4 pro V2.0 with firmware v01.00.15.00 and v01.00.22.00 in next release.

[2020-01-24 20:49:22] digdat0 : @fstephan1 I just submitted a pull request to the fc patcher repo, this would add support for mavic 1.04.0500, P4Pv2 .2200 and .5000 and then also Inspire 2 .300 and .400 firmware. also ubersploit will get back adb on newer fw, which then allows fc patcher process to work on it. run that tool before any of the adb steps, reboot and then gtg.

[2020-01-24 22:05:29] fstephan1 : @digdat0 thanks a lot, you make many people happy.

[2020-01-24 23:51:45] digdat0 : just piggybacking on Matioupi's work :slightly_smiling_face: Wish i were more technical, then i could figure out the patchaddresses and allow hardcoding (GPS) on the newer fw too

[2020-01-25 09:26:28] fstephan1 : support for Galileo would be nice.

[2020-01-25 13:16:25] cantrepeat : Figaro too pls :D

[2020-01-26 02:29:58] quad808 : We need more Russian Brides.

[2020-01-27 01:31:29] chipmangini : NLD site down as of 8:30PM EST US

[2020-01-27 01:33:38] chipmangini : @coldflake ^^^^^^^^

[2020-01-27 06:08:59] coldflake : Oh shit

[2020-01-27 06:10:00] coldflake : Back online

[2020-01-27 11:01:29] chipmangini : Anybody working on some NFZ love for the Mini!

[2020-01-27 11:21:28] heresmydron : <https://nolimitdronez.com/http-200-ok>

[2020-01-27 11:46:19] cs2000 : I wonder if anyone got that joke asside from people in this slack :joy: i was feeling in a particularly geeky mood when i wrote the title lol

[2020-01-27 14:58:55] pingspike : guys why don't you use freshping or something to monitor the nld site availability? it even has a slack plugin - <https://www.freshworks.com/website-monitoring/integrations/> :man-shrugging::skin-tone-2:

[2020-01-27 15:20:19] cs2000 : Will take a look, i get instant notification from uptime robot, but i cant sort the server out, dont have the powaa!

[2020-01-27 16:17:17] cantrepeat : in my best emperor voice while tossing DJI out the window, Unlimited powaa!!!

[2020-02-02 23:01:17] dronepilot : M2 .100 firmware compared to .300 any difference on câmera sharper image quality?

[2020-02-03 09:31:19] cs2000 : Nothing is mentioned in any of the release notes about camera improvements between 0100 and 0510

[2020-02-03 10:50:48] dronepilot : Thanks i mange to sell my M2 and bought a new one that downgrade to .100 fw now i have nfz patch.

[2020-02-03 10:52:29] dronepilot : Using nld fcc patch my personal M2 distance record [https://youtu.be/_OOJlT1zczw](https://youtu.be/_OOJlT1zczw)

[2020-02-03 22:25:49] chipmangini : Just curious if anyone is working on some NLD love for the Mavic Mini?

[2020-02-03 23:58:29] heresmydron : <https://nolimitdronez.com/http-200-ok>

[2020-02-04 10:43:16] chipmangini : Nice! :+1:

[2020-02-04 14:22:28] fredmicrowave : Time to cash... cache!

[2020-02-04 22:53:53] dronepilot : Nld community any 2.0 news?

[2020-02-05 11:39:21] reaktor : @rgf8aerial I have some Mavic 2.0 news. I managed to convince DJI to replace 2 of my 16 month old swollen batteries. Batteries shouldn't be swelling after 30 or 40 charges.

[2020-02-05 11:41:36] reaktor : I used good old Australian Consumer Law to "convince" DJI to replace them. It was a battle to be sure, but new batteries are on their way and I have a tracking number,

[2020-02-05 11:44:14] reaktor : A win for the little guy! Especially after some of the bullshit they have pulled in the past :hugging_face: I feel so warm and fuzzy inside.

[2020-02-05 13:42:26] cs2000 : @rgf8aerial Yeah we know we're a tad late. The Chinese government threw us a curve-ball last week, likely taking some pressure from their best buds DJI and DNS poisoned the NoLimitDronez domain. This meant nobody inside of mainland China could use the app or view the website. We now have mitigation in place but this and dealing with the fallout cost us a week. The attached screenshot is what people were getting.

[2020-02-05 13:43:22] cs2000 : All hail the great Chinese firewall right...

[2020-02-05 17:29:33] dronepilot : Not good att all.

[2020-02-05 17:30:09] dronepilot : That’s a good news.

[2020-02-06 07:12:52] bobdole : a hit dog will holler

[2020-02-06 07:13:53] bobdole : don't interfere with chinese state military operations in the future mmk? no more NLD releases

[2020-02-06 14:07:14] fredmicrowave : This kind of censure is scaring. Especially when we realize it also occurs in western countries. I really hope the Starlink project can change everything . (Or, in a more realistic way, I wonder how governments can counter this truly global communication system ) Freedom of speech and knowledge exchange can be so dangerous for some...

[2020-02-06 15:16:20] fstephan1 : George Orwell was an optimist. Take care big brother is watching you!

[2020-02-06 16:58:40] bobdole : sad that 1984 is a reality and Back To the Future II's 2015 was way off

[2020-02-06 22:48:59] cantrepeat : In 221 BC the Chinese warlords construct The Great fireWall of China knowing NLD would be a formidable foe!

[2020-02-06 22:51:22] bobdole : they popped a doctor, so be thankful it was just DNS poisoning <https://www.bbc.com/news/world-asia-china-51403795>

[2020-02-06 22:52:58] bobdole : btw.. "confused reports" came shortly after news cycles and comedy show jabs about china trying to hide their epidemics

[2020-02-06 23:06:52] bobdole : "Journalists and doctors at the scene, who do not want their names used, told the BBC and other media that government officials had intervened."

[2020-02-07 00:01:55] quad808 : I bet, just sayin' they had DJI employee badges on. Now we know why the are trying to block NLD. Cover their tracks. All kidding aside, may the doctor RIP.

[2020-02-07 01:01:56] ben_lin : Everyone I knew back home literally RAGED when they saw the news that the doctor died

[2020-02-07 01:02:04] ben_lin : Both online and offline

[2020-02-07 01:02:17] ben_lin : Guess the people are starting to wake up

[2020-02-07 02:27:36] wj7106 : [Nolimitdronez.com](http://Nolimitdronez.com) still can’t open the website

[2020-02-07 02:43:36] cantrepeat : Working in Alabama

[2020-02-07 03:04:05] bobdole : 66 is in china or something

[2020-02-07 03:04:51] bobdole : i thought everyone used vpns in china

[2020-02-07 03:09:20] wj7106 : Now we need VPN to browse:joy:

[2020-02-07 03:20:40] fredmicrowave : @jacksphone The sad part is that even 1984 reality is past ... It was so progressive that we got used to it... A kid reading it now would say: "well, so what? "

[2020-02-07 09:05:15] cs2000 : If youre in china, use [nolimitdronez.co](http://nolimitdronez.co)

[2020-02-07 09:05:29] cs2000 : But as of right now the server is a little drunk so the website and app may be down

[2020-02-07 09:10:49] wj7106 : Great. Now we can browse the website

[2020-02-07 15:47:40] flymymavic : Whilst out flying my Mavic Pro today and testing a couple of extra flight batteries the app lost connection, the only way to get it working was to land the quad and power cycle the TX and quad. Kinda sucky as I wanted the screen recording of the long range flight, anyone else had this happen and is there a log file that shows why the app crashed out

[2020-02-07 16:38:35] quad808 : I have found that on some devices, if you are doing both a screen recording AND recording the flight in GO, the app may crap out, due to the device trying to do to much at once. I think this is more of a device CPU issue, rather than the app itself. Try turning off recording in GO...that might help.

[2020-02-07 21:24:49] dronepilot : I always record my flight using iOS screen recorder. This last update 4.3.32 i have seen that it get laggy.

[2020-02-08 11:08:23] flymymavic : I think the issue is TX related, something switches off both USB ports as restarting the TX was the only way to clear the issue.

[2020-02-08 11:35:23] cantrepeat : As @quad808 said it's normally the device taking a dump because of overload, the CrystalSky is notoriously bad for recording both flight and screen. I had to offload the screen recording duties to an HDMI capture device if I wanted both feeds.

[2020-02-08 23:25:07] chipmangini : @catalinaskirace I've had the same problems on several devices, including the Crystal Sky. The processors/ram are too feeble to deal with the data. Running A screen recorder was especially bad. No problems on a more modern device though. I've found that the Samsung Galaxy Note 8 to be my go to if I fly with a phone/tablet. 1200 nits brightness! Higher than even my Crystal Sky, and plenty of processing power too!

[2020-02-09 10:45:52] dronepilot : I don’t think note 8 has 1200 nits even the 10 not 100% positive just guessing.

[2020-02-09 14:16:55] originaldobo007 : It actually does have 1200 nits. Google is your friend.

[2020-02-09 14:39:34] dronepilot : Nice maybe time to change my Apple device to a note 10.

[2020-02-09 14:54:50] cantrepeat : Time to put my CS on ebay.

[2020-02-09 15:22:16] bobdole : i feel like ive tried everything, but once you go galaxy note, you never go back

[2020-02-09 15:23:07] bobdole : used to wonder why they made sunshades until i sold my note 8.. now sunshade is at the bottom of a filing cabinet once i got a note 10

[2020-02-09 18:52:41] dronepilot : Has anyone tested out Xiomi MI9 T Pro?

[2020-02-09 18:52:59] dronepilot : Xiaomi

[2020-02-09 21:16:47] cantrepeat : I've got an xiaomi mi pad 4 I have yet to try out.

[2020-02-09 21:58:01] pingspike : We need a _"Mother. Fuckers."_ emoji.

[2020-02-10 00:31:36] quad808 : S8+ also has a super bright screen, buy a refurb one, for around $250

[2020-02-10 02:25:49] dronepilot : I use 11 pro max i have some difficulty at bright sun light.

[2020-02-10 03:51:25] rickysuper : I use Samsung Note8 and never need a sunshde

[2020-02-10 11:18:09] dronepilot : You guys are preferring the Note 8 rather the the 10? I’m really bending to get a new device, never had an android phone.

[2020-02-10 15:02:37] bobdole : no. i prefer the note 10, but i switched from a note 8 to a LG G8 Thinq in poor judgement... then got a note 10 since the LG's screen was too dim for outdoor use

[2020-02-10 15:03:01] bobdole : but... note 8s are relatively cheap on ebay

[2020-02-10 17:32:30] dronepilot : Nice. I’m really considering adding the note 10 for my flying gear since crystalsky unit is a little aged and heavy. But would love to see a crystalsky brightness on the note 10 since it got 1200 nits.

[2020-02-10 18:00:35] cantrepeat : I'd love to see a crystalsky running on a snapdragon with android 9 tbh

[2020-02-10 18:25:08] quad808 : For the Samsung phones, you have to set the brightness to auto, or it won't go that bright in sunlight.

[2020-02-10 20:34:28] dronepilot : @quad808 iOS if you leave auto brightness on dim kicks in at mid flight. @catalinaskirace that would be a beast, hope dji make a new generation on the CS.

[2020-02-10 20:37:27] quad808 : Samsung. Not iOS. What are you talking about.

[2020-02-10 23:08:22] chipmangini : @rgf8aerial The Note 10 is only 674 nits of brightness. The Note 8 is the one to get at 1200 nits! It's much brighter than my CS which is 1000 nits. It's the perfect addition to my Mavic Mini, since the CS isn't 64bit, and because of that it can't run DJI Go Fly

[2020-02-10 23:43:49] dronepilot : @chipmangini so the phone to purchase will be the note 8. Thanks on the info.

[2020-02-11 02:30:32] bobdole : eh.. displaymate says note 8 has 1200 nits and note 10 has 1308 nits

[2020-02-11 02:33:22] bobdole : i've had both and i honestly can't say the screen brightness is different

[2020-02-11 02:34:06] bobdole : but the note 10+ sure as hell isn't only 674 if the note 8 is 1200. i think the 1200 /1300 is more accurate

[2020-02-11 02:34:53] bobdole : but i'd also recommend a note 8 just because its BRIGHT and CHEAP

[2020-02-12 02:08:55] quad808 : why oh why do I read what @jacksphone writes? he only costs me $$

[2020-02-12 02:15:54] wj7106 : Can’t open nld app in China

[2020-02-12 03:11:52] quad808 : Try [nolimitdronez.co](http://nolimitdronez.co) inside of China

[2020-02-12 03:14:35] wj7106 : This website can be opened, but NLD program cannot run

[2020-02-12 03:17:01] wj7106 : Even with VPN, it can not run

[2020-02-12 15:29:08] trollspeed : Any news on Air?

[2020-02-12 16:48:37] cantrepeat : It's fun to breath it.

[2020-02-12 16:50:45] quad808 : The air is highly over rated

[2020-02-12 16:50:54] quad808 : :rolling_on_the_floor_laughing:

[2020-02-13 02:11:01] dnacho : And on the mini?

[2020-02-13 02:43:04] originaldobo007 : The mini is smaller than "small" but bigger than "micro".

[2020-02-13 10:38:31] trollspeed : Guys for me it doesn't look so funny the onmy reason for buying license from nld was to get nfz, for air and it was told.many times that it will be added soon. I'm not sure that it was told more than a year ago, but there is no progress visble

[2020-02-13 10:51:39] fstephan1 : Why NLD dont include this support -> <https://nolimitdronez.com/de/boards/topic/3542/p4-v20#5055> i tested it works well.

[2020-02-14 09:01:39] cs2000 : @trollspeed Its bloody hard thats why! Not to sound rude, but you dont even understand the complexity. We dont just not do something because we cant be bothered, but at some point, we come up against brick walls and with all the will in the world, we cant proceed. That situation is fluid of course, sometimes the odd little breadcrumb comes up and a way round is found, but they're few and far between. DJI is using decent encryption (remember in direct retaliation to this groups efforts), we have never broken their encryption, we have found ways around it from sloppy mistakes they made elsewhere in the chain. They also added the Trustzone from the air onwards, even further complicating things. Have you seen a bypass for Apple's secure Enclave yet? (same technology with a **much** wider base of people hacking on it)

[2020-02-14 11:51:51] trollspeed : @cs2000 Guys, I'M not arguing, i'm stating that if you don't know when or are you able to do _*than don't state that you'll do that soon, confusing*_ people and making then to buy something in really long advance. As for me i'm also interested in moving things forward and that's the reason why i've spent time in doing translations for nld without any idea of reward. You've told us a year ago that something will be ready in next week and there is no result. So don't change the topic complaining of complexity, you've stated that you had solution to root the device and other statements, but no changes are provided to the public, that's why i'm asking you on any progress. I believed that you'll be able to solve the problem and nld stated that solution will be delivered soon, every time i've pinged with this question and i've waited for it inspite of changing drone. So i don't care about the complexity, i see the way you are talking to me.

[2020-02-14 16:22:47] cs2000 : @trollspeed As i said "Not to sound rude" im sorry if thats the way it came across, but i was just trying to highlight why things seem to take forever, or in some cases just cant be done

[2020-02-14 16:29:12] trollspeed : @cs2000 yep and that's why i've told that now it is clear that we shouldn't wait for it :/ and i'm surprised that we are told on this fact only after such time of waiting

[2020-02-14 17:02:51] quad808 : @trollspeed Can you provide some proof that anyone from NLD actually said that NFZ removal for the Air will be added soon? I can't recall ANYONE from NLD every saying that. In fact, we tell everyone on NLD support that we continue to work on adding more mods for the Air, but it is extremely difficult. There are no promises for ANYTHING, when it comes to the Air. Or are you just complaining? How many people are successful in modding DJI Devices....IN THE WHOLE WORLD besides some very, VERY talented people who frequent these forums? NLD is the outlet for the official OG's work that is packaged up nicely for normal people to use. If this were easy, more people would be doing it. There aren't. Because it is NOT EASY.

[2020-02-14 17:05:59] quad808 : @cs2000 Hey man, I don't mind sounding rude. People want, want, want without understanding how much work goes into what we currently have available. I understand that view point totally, but I don't see ANYWHERE that we said NFZ is coming soon to the air or even anything close to this.

[2020-02-14 17:09:02] quad808 : @trollspeed one more add. Having root access is just one part of the bigger puzzle. These are not simple Android phones we are talking about, but I am not a Dev, so what do I know...LOL!

[2020-02-14 17:11:15] d95gas : @quad808 Totally agree..... Going back to day 1 when there was only a handful of us on Slack, it was always understood that nothing was guaranteed, and I remember many conversations around the Spark where it was made clear that "if it were possible, then it would be added...... But no guarantees" We should just be very very grateful for what we have now..... Thats a MASSIVE leap to what we had at the start..... which was nothing, and having to put up with DJI crap zones. We are all eager for more..... but just have to be patient and wait.

[2020-02-14 19:18:36] originaldobo007 : Can I chime in on one thing here? The Mavic Air is a piece of shit anyway. You might as well use an original Mavic Pro which will give you better range. It's not like its _that_ much bigger than the Air. You'd get better battery life, better range, etc. The Air is a waste of a bird.

[2020-02-14 19:21:09] originaldobo007 : And before any fighting gets out of hand....enjoy some drone porn on [droneboning.com](http://droneboning.com) and relax.

[2020-02-14 20:52:14] bobdole : uhm... better done with a mavic air than a mavic pro... but i'm guessing some people could take a phatom or an inspire with enough lube?

[2020-02-14 22:24:56] oakley75 : Overall when video quality matters, Air all day.

[2020-02-14 22:25:46] oakley75 : Every other use though... Pro

[2020-02-15 07:57:30] trollspeed : Can you hive me any reason why should say things which didn't happen before? I'm really sorry but slack says that i don't have an ability to scroll to that time, cause it says that there are more than 10k messages in workspace so i'm unable to scroll back. And sorry, but i don't have screenshots, cause i didn't think that here such a low majority that i have do screen shots of this facts. Just before the release of mp2 there was phrases that ma patches will be available right after the mp2 release and many other facts, duch as an error on nld site on a bird map, where some things were stated for ma such as firmware rollback and many other. Im here not to point to that shit im here to get answers.

[2020-02-15 08:11:06] trollspeed : BTW. [https://nolimitdronez.com/en/mavic-air-support](https://nolimitdronez.com/en/mavic-air-support)

[2020-02-15 08:12:36] trollspeed : Of course you can say that you've added support, but if we can dig a little deeper we can find some facts about saying that nfz was promised to be added

[2020-02-15 08:22:29] trollspeed : Yesterday, i'v rerooted Tesla because of that new update from them, just wrote another payload and placed it in. And it is really funny to hear such phrases from you @quad808 . It is a good position to state, that i'm saying unproved facts. But if you are talking in such manner. Can you state that there were no errors on site which stated facts which dodn't happen. Or that nld client halted while connection and many other errors which were fixed lately?

[2020-02-15 08:26:12] trollspeed : The only thing which started this thread was me asking of any progress and in spite of saying i've got huge write up saying that i'm a stupid user which doesn't understand the amount of work should be done. And this is not my problem, because previously you've stated that you as NLD is working on this and you are goijg to put some progress on it and now you are just saying that we didn't say that.

[2020-02-15 14:59:27] rickysuper : If it is supported, it will finally support.

[2020-02-15 20:06:22] quad808 : @trollspeed maybe you need to roll up your sleeves and get to work on the Air yourself instead of waiting for someone else to do it for you?

[2020-02-15 23:00:18] bobdole : nice to see angry trolling russians instead of the usual (maybe the corona virus wiped out those trolls)

[2020-02-15 23:02:08] bobdole : i was _*very*_ interested in mavic air features in NLD and I would have noticed any promises. at most they'd say they were working on it and more often than not everyone speculated that nothing further would come on the mavic air due to the way its locked down

[2020-02-16 20:07:08] trollspeed : First of all, Belarus And Russian Federation are different countries, so such phrases as "trolling russian users" sound at least rudely, but actually they are stupid. Second thing i wanted to point that when i came to this chat i tried to be usefull, showed my backend in reverseengeneering and developing software for car tuning, but nld wasn't interested in cooperation, so i've decided to buy license, cause to do such thing from scratch will take to many time. And every time i've asked for updates i was told that somebody is working on it and was told to wait a little. I'm sorry that i didn't take screenshots from those, they told that root is present and updates will be placed soon. So you can continue joking in spite of doing something :) We can agree that i was stupid enough that i was wearing purple glasses and every thing i'm writing in here just are my fantasies. But can you you give me any reason why should i behave in a such manner? I came in here asking for any updates and in spite of saying that there will be no updates i've read tons of crying tales saying that it is really hard and impossible and other bla bla bla.... plus joking and asking for proofs of previous conversations... great manner. :) So good luck.

[2020-02-16 20:58:55] lolo780 : Check out [https://github.com/iNavFlight/inav/wiki](https://github.com/iNavFlight/inav/wiki) Build your own that does exactly what you want.

[2020-02-16 21:28:35] dkovar : Your citizenship aside, you -are- trolling. Perhaps you can accept the state of play, agree that you've made your point, and let us all move on?

[2020-02-17 00:45:08] cantrepeat : I need my tesla hack, anyone know a guy?

[2020-02-17 07:49:02] trollspeed : @catalinaskirace if you are running one with mcu1 i think i can point you the direction you can get it rooted :)

[2020-02-17 08:51:36] cs2000 : Correct. Leave it be now.

[2020-02-20 03:02:58] yihuasteven : Nldapp.exe cannot work, opened by administrator, antivirus software and firewall off, but nothing happened. Tried redownloading the latest version from nld website, still cant work. My os is win 10 1909, it used to work nomally some time before. Any idea what might be wrong?

[2020-02-20 17:32:51] quad808 : Do you get no screen, nothing happens at all? No error messages etc? If that is the case, do you know how to use system restore in Win10? Use it, pick a date that you KNOW NLD was working. This may give a clue as to if a Windows update patch is the culprit. I can tell you that no one else has reported this so far.

[2020-02-20 21:21:43] bobdole : DAMNIT GUYS WHERES MY MAVIC 3 NFZ HAX!? I PAID YOU $40 SO I OWN YOU.. HURRY UP

[2020-02-21 14:09:16] cantrepeat : The checks in the mail!!

[2020-02-21 14:42:51] cat.db : no news ？

[2020-02-21 15:53:12] mefisto : No, not yet, Belarus is still a separate country. Wouldn't call it independent, but separate seem like a correct word.

[2020-02-21 17:56:43] fredmicrowave : No ETA for news ?

[2020-02-21 19:23:59] cantrepeat : No news for ETA?

[2020-02-21 19:29:44] bobdole : *buys [nldrumors.com](http://nldrumors.com)*

[2020-02-21 19:40:24] cantrepeat : _post ETAs = soon™ on [nldrumos.com](http://nldrumos.com)_

[2020-02-21 19:43:12] digdat0 : <https://imgur.com/pEa5iS3>

[2020-02-21 19:43:46] digdat0 : "It's ready, when it's ready"

[2020-02-21 19:54:53] digdat0 : The problem is, if the NLD guys say "we are thinking about XYZ", every pilot comes into slack and busts their balls about "YOU PROMISED THIS FEATURE ON THIS DATE, HOW DARE YOU NOT RELEASE THIS FEATURE ON THIS DATE!!" And then its a nightmare. Its easier to say absolutely nothing, and then surprise folk .. than to even share any detail and have people beat ya up. These guys do it on their free time, and its not their job. Its a hobby, and it needs to be fun to keep motivating folk.

[2020-02-21 19:55:26] digdat0 : im going back to my dev planning meeting now :smile:

[2020-02-21 20:21:15] bobdole : i want to put that dilbert comic in my work email signature

[2020-02-21 20:21:32] bobdole : for sanity

[2020-02-21 22:34:25] fredmicrowave : Back to BellaRussians girls then ...

[2020-02-22 02:13:51] mefisto : I've heard these girls are cold. Mostly because Russia closed the gas gauge in January :stuck_out_tongue:

[2020-02-22 05:55:53] yihuasteven : Got no screen, nothing happens at all, sometimes, but some times works normally, can not find any regulation, for example it worked yesterday night, but it doesn't work for the time being now. I tired on 2 different computers, got the same result, it may not be related to the system.

[2020-02-23 20:38:48] ben_lin : But seriously though, what are the plans going forward?

[2020-02-23 21:55:18] quad808 : I will not spill the beans, but ..... great stuff is coming...no one is sitting around doing nothing, don't you worry. :grin:

[2020-02-23 22:03:26] fstephan1 : <http://www.coptersafe.com/product/nfz-mod-v2/> :disappointed:

[2020-02-23 23:10:28] cantrepeat : What's $400 between friends?

[2020-02-23 23:35:42] fstephan1 : Cheap :disappointed: he use the work from OG and make money from drone nerds.

[2020-02-24 01:02:19] dkovar : People pay $400 to unlock NFZ's?

[2020-02-24 02:27:46] digdat0 : i think coptersafe figured out how to mod parameters in the mavic before many, i recall someone sniffed their app and saw what it did and it helped move things forward across the board. i dont think they copied work.

[2020-02-24 02:41:43] quad808 : :+1:

[2020-02-24 04:52:09] mingtao : ```coptersafe was created long before OG, and the prices that you see are the prices of the past - then they were relevant and coptersafe was a pioneer in a hacking and modding of DJI```

[2020-02-24 04:52:56] mingtao : <https://www.vice.com/en_us/article/8x9jv4/drone-pilots-are-buying-russian-software-to-hack-their-way-past-djis-no-fly-zones>

[2020-02-24 04:54:21] mingtao : of course now. no any pay for mod at this prices

[2020-02-24 09:10:48] cs2000 : This hits the nail on the head. We used to share a lot more "what we're working on" but we get our balls busted. NLD is a complex app with a lot of moving parts, let alone the fact that we have and still are developing our own hacks for drones, not just relying on the community like we used to do. It takes time sadly and even internal deadlines we set do get missed. Something is coming, hopefully pretty soon. My personal hope is when this gets dropped, future updates will come significantly quicker.

[2020-02-24 12:51:48] yihuasteven : When I run nldapp.exe, i got no screen, nothing happens at all, however, very little chance to work normally, and can not find any regulation, for example it worked once several days before, but after that, it still cant work. I tired on 2 different computers, got the same result (at the same time, work on both computers or neither, nothing to do with the network , when it worked, the vpn was off). I was told no one else has reported this, but just happened. I opened a support ticket for this problem, anyone has any idea for it? Thanks very much

[2020-02-24 16:27:05] ben_lin : well people are being jerks as they are on the internet... it's just that it has been really quite for a long time now so it'd be nice if you guys can let us know what you guys are hoping to achieve with NLD :)

[2020-02-24 17:11:19] quad808 : @yihuasteven are you in China behind the Great firewall? Try a VPN, NLD is being blocked right now in China. To reach the website, use [nolimitdronez.co](http://nolimitdronez.co) We have a fix for this and will be rolling it out in NLD 2.0

[2020-02-24 22:42:33] cantrepeat : I was thinking about free Russian Brides...

[2020-02-25 05:00:24] yihuasteven : VPN is useless, I mentioned the details in support ticket, hope the fix will come soon, thx @quad808

[2020-02-26 06:58:33] trollspeed : Well i was thinking better of this cloud of "developers" :) sorry to say that it is not a good practice to point to the complexity of the development inspite of short answer, that nobody is going to provide solutions in the nearest future. Also it is a "great idea" to use different kind of harrassment, based on location and shout such things about people and nations you know nothing about, especially when you are unable to answer direct questions :) BTW In here we have another great habbit - we are not offended by stupid people. Have a great day :)

[2020-02-26 10:11:29] cantrepeat : Other then a good sense of humor I got nothing.

[2020-02-26 10:52:10] fstephan1 : <https://nolimitdronez.com/boards/topic/3598/fcc-mode-phantom-4-pro#5146>

[2020-02-26 16:33:41] bobdole : according to [nldrumors.com](http://nldrumors.com) plans on updates for news on eta of update news has been delayed due to the coronavirus

[2020-02-26 16:38:27] cantrepeat : @jacksphone I fucking knew it!!!

[2020-02-26 16:59:55] cantrepeat : I hope !DJI has to pay an export fee on the virus!

[2020-02-26 17:02:14] quad808 : In other news @trollspeed goes on another small minded rant, and still has not contributed squat towards the advancement of modifying DJI craft. But he says he can root a Tesla. Hmmm....script kiddy perhaps? dunno.

[2020-02-26 17:05:06] cantrepeat : No way man, he wrote that shit from scratch!! But it only works on v1.1

[2020-02-26 18:02:53] mefisto : If i got sudden 20% raise in bills, with future prospect of either even bigger raise or bending over to Putin, I would be salty as well.

[2020-02-26 18:32:35] trollspeed : Nope i just know the price of my working time :) just search for my contributions in creating software for car flashing, i think you'll be suprised a little bit :) btw tesla has ubuntoo on onboard and unencrypted filesystem on emmc, so it is not a big deal to root such cars. Also cars with mcu1 are running on nvidia tegra cpu, which has built in vulnerability which couldn't be fixed so it is possible to get needed changes without any soldering :) and putting the car in factory mode or doing some resetting after crash brings good amount of income. Also @mefisto please count money in your pockets:) my salary and additionals incomes gives an ability to pay bills even if they will raise 200% without any bad emotions and i'm paying them cause i want to be a good partner for country i'm living in, but for now it is understandable that you are from those диванные войска, which believe the things they've heard on tv's and radio, JFYI Belarus has backup channels for oil from europe :) and getting back to the main topic, while arriving to this channel i've shared my previous backend and things which i was good at and the only thing, i was able to help at that moment with that knowledge was some.of the translations. So i've bought that license cause it was stated that good support for the mavic air will be added. And now inspite of saying certain things i'm getting jokes on country, askijg for proofs and avoiding direct answers to my questions instead of short amswer withiut any details. I am asking this just to understand do i have to keep ma or sell it cause it is good mix of everything for me, but i'm tired of its nfz. I have anotyer drone, but this one is really handy. Ok. Have a good time :)

[2020-02-26 19:23:44] bobdole : hey take it easy. coronavirus man..

[2020-02-26 19:38:32] quad808 : @trollspeed roll up yer sleeves and lets see what you can do on DJI Firmware modding instead of complaining.

[2020-02-29 13:29:00] d95gas : Afternoon guys. Just opened my NLD Application (always run in Admin mode). Immediately it opens I get an error message: "System Error. Code 5. Access is Denied" Only way I can close it is to kill the task. Downloaded a new version and get exactly the same.

[2020-02-29 13:39:22] chipmangini : @d95gas v1.9.3.7 works fine for me in the US...

[2020-02-29 13:42:15] d95gas : Just checked Firewall and AV and turned all off and still getting in. Will setup VPN for USA and see if that has any impact

[2020-02-29 13:48:09] d95gas : VPN running showing I am in New York, and NLD still displaying message. Going to try on other laptop, its a lot cleaner than my dev laptop.

[2020-02-29 16:53:58] quad808 : keep us updated

[2020-03-01 04:14:01] yihuasteven : @d95gas I even do not get an error message, nothing happens at all, it has been 2 weeks (since I noticed the problem). Running vpn to US or HK, it did not help. However, very little chance to have it run, but not clear what is the reason. I was told this would be fixed with NLD2.0, and NLD2.0 was mentioned to be released by the end of January. I do not want to complain about the release time of NLD2.0, and I am not requiring any new features or new versions at all in this case, I just want to use it normally as it was used to do before for my activated mp and m2. At least can you let me know your plan to fix this problem. Thanks for your hardworking. @quad808

[2020-03-01 05:38:08] digdat0 : these issues sound like local OS environmental, not problems in NLD. Are you guys on win7?

[2020-03-01 06:06:03] yihuasteven : i am on windows 10 @digdat0

[2020-03-01 08:28:02] d95gas : And I am W10 1909. Did VPN yesterday to USA and still no joy, was going to try my other laptop but got side tracked, but will give it a go shortly. Up until now I have not had any issues at all. Have now removed Firewall, SEP has been uninstalled as I know its Network intrusion side can be very funny, so now I have standard W10. Give me 20mins and I will try other laptop and give results

[2020-03-01 08:52:02] d95gas : I am getting the error message "System Error Code 5. Access Denied" every time I run NLD app. I can click OK and it continues to load. then I get the message again when I try to close, and end up having to kill the task> This is the only application its doing it to. Have checked all security permissions and they are good, proved by checking "Effective access". Tried running as admin. Tried running through VPN to USA. Tried all the fixes indicated by Microsoft, and still it persists. Have just tried it on the wife's laptop, which is W10 1803 and its fine. I am on 1909, so wondering if its something in that. Just going through uninstall process with some apps I recently put on, to see if they are impacting.

[2020-03-01 08:58:27] bin4ry : which country are you?

[2020-03-01 09:04:07] d95gas : Morning Bin4ry. Sorted. Running fine after uninstalling "Droid Explorer" :slightly_smiling_face: happy chappy now, I just hate glitches like that

[2020-03-01 09:04:17] d95gas : and I am UK

[2020-03-01 09:04:59] bin4ry : nice

[2020-03-01 09:05:04] d95gas : Why droid explorer was impacting only NLD I dont know, I tracked it through Process Explorer and nothing stood out, and all permissions were correct.

[2020-03-01 09:05:16] bin4ry : yeah other apps may cause issues if they try to read usb ports of NLD

[2020-03-01 09:05:21] bin4ry : or intercept traffic

[2020-03-01 09:05:24] bin4ry : NLD then stops working

[2020-03-01 09:05:50] d95gas : I shall chill now :slightly_smiling_face: instead of franticly ripping everything out of the system

[2020-03-01 09:05:54] bin4ry : :wink:

[2020-03-01 12:46:49] wj7106 : I want to say that I have been unable to open NLD in China for several months, even if I use VPN, I still have no response at all! This question was raised last month! Do not release NLD v2.0. You should also fix this version. Thank you

[2020-03-01 14:21:03] d95gas : @wj7106 what happens when you run the application? What error message(s) do you receive? Have you run in Admin mode and does this give the same result. Have you used something like "NordVPN" (excellent) and setup VPN to the USA. What results does that give you?

[2020-03-01 14:28:01] wj7106 : @d95gas There is no response to opening with the administrator, and there is no response to setting the American route with VPN. The background can see that the NLD program runs once and then closes itself!

[2020-03-01 14:30:37] d95gas : Have you tried on another device..... with VPN? thats what led me to find the issue on mine this morning. Another application was impacting on NLD, soon as I removed it, NLD worked perfect. Even if you just knock up a quick Win7/Win10 appliance using VirtualBox, give it a clean environment to work in.

[2020-03-01 14:31:11] d95gas : <https://www.virtualbox.org/>

[2020-03-01 14:36:11] wj7106 : No response to any attempt, neither win7 nor win10!

[2020-03-01 14:46:38] d95gas : Without actually being in front of it, I dont know what to suggest. VPN trick usually works with most other software. Was there mention of NLD doing something with Version 2 for users in China? Have you disabled any Antivirus software and temp disabled your firewall?

[2020-03-01 15:55:39] yihuasteven : @wj7106 We met the same problem. No response after running the nldapp.exe by admin, tested on several different computers, neither win 7 or win 10 works. Closed up all anti-virus and firewalls, run VPN to USA (global mode), most softwares or browsers works well. I will be happy to see NLD2.0 to solve the problem, but if 2.0 should still have to take some time to be completed for releasing, please considerate fix the problem first. Thank you.

[2020-03-01 18:19:40] quad808 : READ: "other apps may cause issues if they try to read usb ports of NLD [[11:05 PM]](https://dji-rev.slack.com/archives/C9XMYC35E/p1583053521092200) or intercept traffic [[11:05 PM]](https://dji-rev.slack.com/archives/C9XMYC35E/p1583053524092400) NLD then stops working"

[2020-03-01 18:21:00] quad808 : I would suggest bringing up Win10 in safe mode and then try running NLD, and see what happens. If some program is running on your OS that is reading ports, or needs access to ports, NLD will NOT run

[2020-03-01 18:22:04] quad808 : Or, use task manager, start end tasking apps you have running on your system...narrow it down and figure out what program is scanning ports on your OS

[2020-03-01 18:23:12] quad808 : If this is a China firewall problem, NLD will still run, just not connect to our servers to validate activation....not just not run at all

[2020-03-02 07:20:01] yihuasteven : All right, I will try under safe mode later, however I don't think it would work. I have not installed new apps since last time nld ran absolutely normal. And as I mentioned, I have got little chance to open NLD app, it was on the same computer, same operating system with same apps running, this is weird. I also tried opening NLD app on the other computer which running brand new installed win 10 system, as well as on my friends' computer running windows 7, got the same result. I don't think all the computers happened to have the "other apps" to cause issues. At least, I will try safe mode and report the result. Thanks @quad808 @wj7106

[2020-03-02 07:31:31] yihuasteven : NLD can not be open under win 10 safe mode, neither.

[2020-03-02 09:13:01] wj7106 : No matter how you try, it won't work

[2020-03-02 09:46:29] cs2000 : @wj7106 are you the guy that keeps logging support tickets (like at least 5) we respond, then you log another one saying we havent responded? ------------ TL:DR for **anyone** that's "protected" from the nasties of the "open internet" that the rest of the world enjoys by the great Firewall of China.... NLD's website and app is blocked by the firewall. You can access the website at [nolimitdronez.co](http://nolimitdronez.co) but the app doesnt work, with or without a VPN. NLD 2.0 will resolve this issue once its released.

[2020-03-02 10:02:23] wj7106 : @cs2000 Yes, I haven't been able to open NLD since I last used the NLD patch, including several friends. I just want to tell you about our current usage :handshake:

[2020-03-02 10:05:32] cs2000 : Yeah thats fine, we do know about it and have responded to every single ticket you logged. As i say, its being resolved with NLD 2.0, but theirs no easy way to fix it in the current version sadly.

[2020-03-02 10:09:59] wj7106 : @cs2000 My friend always asked me to respond to this problem to you. Their NLD in their hands has been unable to be used. We are looking forward to the release of the new version of NLD as soon as possible! :heart_eyes::heart_eyes:

[2020-03-02 10:10:18] cs2000 : And we are looking forward to it aswell :slightly_smiling_face:

[2020-03-02 10:10:38] wj7106 : :smile:

[2020-03-02 10:43:41] fstephan1 : The NLD Webside is dead An error occurred while starting the application. • .NET Core 4.6.27817.03 X64 v4.0.0.0 | Microsoft.AspNetCore.Hosting version 2.1.1-rtm-30846 | Microsoft Windows 10.0.14393 | [Need help?](http://go.microsoft.com/fwlink/?LinkId=517394)

[2020-03-02 10:44:51] cs2000 : Getting the boss on it :wink: Sadly i cant rectify as i dont have that level of access

[2020-03-02 11:43:35] cantrepeat : UNLIMITED POWER!!!!

[2020-03-02 11:51:59] cs2000 : Back up now, sorry for the delay!

[2020-03-02 13:31:57] yihuasteven : @cs2000 The app doesnt work, with or without a VPN, inside the GFW and NLD 2.0 will fix it but hard to fix it currently, I see it. Then, here is my quesitons, what's the problem and what is the plan or ETA for it? Will it be soon? Indeed, I dont mean to push you to release the NLD2.0 (the blog said it would be ready by the end of January), I know you are working hard and there are quite many difficulties to solve, but it is unnecessary to combine the fix with NLD 2.0, a small version to fix like 1.9.3.8 will satisfy me. I just want to get NLD client run. With a vpn, most blocked sites or apps are accessible. What's special for NLD client? Maybe I am wrong,but I guess functions of NLD client do not rely on an internet connection except downloading the firmwares and checking whether the connected drone own a key. I dont know which part of it went wrong and makes the fix difficult? If it is the firmware downloading server, I can try to download myself or using the already downloaded ones, in fact, I do not need to download firmwares. At least, that's ok to wait for NLD 2.0 to solve this issue if it has a plan to be released soon, if not, could you please considerate to just fix this issue first. Thank you.

[2020-03-02 13:39:27] cs2000 : @yihuasteven As per earlier replies, whenever we mention a release date, people get on our backs so im not going to mention anything further on the date. NLD continually uses client>server comms. Dumbing it down a lot, the NLD you download is literally just a skin. Everything is server based, all the DUML, firmware, licensing, everything. The fix we have had to apply isn't a couple of lines of code, it took time to implement a (hopefully) reliable solution, and this needed new infrastructure too. I know im being vague, but i/we dont **want** people to understand how we operate the app or backend. The less that is common knowledge, the harder it will be for it to be blocked again :slightly_smiling_face: Release date should be soon and will include support for mitigating the GFW amongst lots of other things, thats really all i can say

[2020-03-02 13:48:56] yihuasteven : @cs2000 Get it. My main point is not the date, the 2.0, nor to understand how it is operated, I wrote with much care to express it so i think you shall get it. Only thing I want to say now is that if the 2.0 have to take some time, take it into consideration to fix this issue first, although it is not easy, comparing to 2.0, it should be a bit easier to fix. Thank you for your reply. Hope a good news could come out soon.:blush:

[2020-03-02 13:53:25] yihuasteven : .

[2020-03-02 13:55:00] cs2000 : OK, well to answer it directly, the time it would take to add the fix to the current version, being that they dont even share the same codebase anymore (2.0 is a total rewrite) would be excessive seeing as the release for 2.0 isnt too far away (as things stand right now).

[2020-03-02 17:00:06] ben_lin : Lmao work inside the GFW

[2020-03-02 17:00:20] ben_lin : I see this as a never ending battle then

[2020-03-02 17:01:11] cs2000 : More than likely. DJi does not like NLD, and since theyre are best friends with the government the day we got blocked was always coming sooner or later

[2020-03-02 17:01:26] cs2000 : but hey, this fix should work

[2020-03-02 17:16:24] mefisto : Congrats for NLD Team for being recognized by the Chinese gov! Now you can wear the official "Communists hate them" badge. (As soon as someone designs it.)

[2020-03-02 20:15:49] cantrepeat : I wanna see a Great Firewall of China meme.

[2020-03-02 22:55:44] quad808 : LOL, yep....GFW. Now, had it been said that the user was in CHINA, BEHIND THE GFW....I wouldn't have said to troubleshoot, other than to try a VPN client. Since this is the issue....realize it is not NLD, but China that is stopping you from using NLD by blocking it.

[2020-03-02 22:57:18] cantrepeat : AKA government shutdown :smile:

[2020-03-02 23:15:47] quad808 : !DJI

[2020-03-04 10:38:42] cs2000 : NLD is down at the moment, being worked on

[2020-03-04 10:39:12] czokie : Must be contagious. Wiki was down before

[2020-03-04 10:40:52] cs2000 : haha must be!

[2020-03-04 12:15:02] cs2000 : Aaand we're back

[2020-03-04 18:17:27] quad808 : I hurt my toe...dang server rack is very hard...

[2020-03-09 05:03:54] ben_lin : Haven't been using my drone through the winter and now spring has come, time to dig out the M2

[2020-03-09 05:04:20] ben_lin : Curious if NLD is able to let me upgrade to newest fw and preserve the ability to downgrade?

[2020-03-09 05:04:43] ben_lin : I remember reading that this is a feature a while back but dk what things are like now

[2020-03-09 07:32:19] hotelzululima : !wiki

[2020-03-09 09:59:37] fstephan1 : Now is the best time for new NLD and support for new firmware. DJI's R&D department is closed and DJI has no time to fight against NLD.

[2020-03-09 12:33:12] fstephan1 : Source : German DJI customer service center , this morning by phone. Most of DJI China is temporary closed, reason Corona Virus.

[2020-03-09 12:59:52] dkovar : Aye, but software development can be done remotely, and often is.

[2020-03-09 13:32:50] cs2000 : @ben_lin no mate, cant downgrade at the moment from the latest M2 firmware

[2020-03-10 02:24:58] rickysuper : my friend can downgrade his M2 firmware 0510 to 300 using DJI Go4 app

[2020-03-10 08:44:15] cs2000 : Yeah, but you still cant then downgrade to .0100 which is the most open FW right now

[2020-03-10 15:57:33] dronepilot : Question Phantom 4 Pro V2.0 is it worth buying with the display unit or the regular?

[2020-03-10 19:13:53] quad808 : That depends. If, and I say IF a more recent version of GO is modified, you may be stuck with whatever is loaded on the built in monitor, unless it can be rooted. Me? I would just spend less $$ and use your own screen that you have control over.

[2020-03-10 22:08:41] dronepilot : Thanks @quad808 i have the same thought. But the cs screen it’s outstanding in quality.

[2020-03-10 22:20:46] quad808 : Yes it is. BUT...you can use a Samsung S8, or higher phone and those are super bright in direct sunlight. Over 1000 nits I believe, if left on auto. Refurb phones are inexpensive. Up to you.

[2020-03-11 00:24:43] chipmangini : @quad808 @rgf8aerial I have the Samsung Note 8, bigger and faster than the S8, and 1200 nits! Much brighter than my P4P+ built in screen, and am not at the mercy of !DJI for what apps I want to run. $250 on eBay, and I can't tell it's not brand new. Just sayn'..... <https://www.ebay.com/itm/Samsung-Galaxy-Note-8-64GB-UNLOCKED-CDMA-GSM-Verizon-AT-T-T-Mobile-Sprint/153812919966?ssPageName=STRK%3AMEBIDX%3AIT&var=453846582107&_trksid=p2057872.m2749.l2649>

[2020-03-11 00:36:46] quad808 : @chipmangini LOL...OMG, I forgot I ordered one! Yep, the Note 8 is even better!

[2020-03-11 11:03:27] dronepilot : Nice quad808, Doctor i’m considering on getting the standard rc. You guys are correct. But i got to admit recently i bought a Note 10 + and wasn’t satisfied with the brightness at direct sunlight. Got back to apple 11 pro max.

[2020-03-11 13:14:45] originaldobo007 : Regular controller is the best way to go IMO. You can run Litchi, and you have much more control. Remember, the screen controller is running a highly, highly underpowered processor. Even the M2 Smart RC is only 32bit. Maybe at some point in the future if DJI ever re-did their smart controllers with appropriate power to match their price, this would be something to reconsider. But as of now, the regular RC is the way to go.

[2020-03-11 16:37:48] dronepilot : Thanks StanLee, i used to have a SC and a CS really só that they are underpowered processor. Will stick with standard RC.

[2020-03-11 16:39:43] dronepilot : Another question i manage to downgrade my iOS Dji Go 4 version non jail break. How can i have 2 Dji Go 4 version installed.

[2020-03-11 21:44:16] dronepilot : Manage to keep only one dji go 4 app, since side load on iOS only possible by jail breaking. I’m currently running 4.3.0 testing out this version, M1 / M2 bird. What are your guys favorite version?

[2020-03-12 01:17:22] chipmangini : @rgf8aerial The Note 10+ only has 686 nits. The note 8 is 1200.....

[2020-03-12 01:45:23] cantrepeat : how's the cpu power in the note 8?

[2020-03-12 02:04:26] dronepilot : @chipmangini thanks thought something was wrong on the 10 +.

[2020-03-12 09:35:42] chipmangini : @catalinaskirace The Note 8 can take anything you can throw at it without any lag at all, and overall it feels really fast. It runs all my apps, and obviously has 4G if you need data for maps, etc in the field. The USB-C does HDMI out too, which I would like to connect to my Epson Moverios, but I've yet to find an adapter that will do both. Still working on it though....

[2020-03-12 10:55:40] cantrepeat : I was checking out the Epson Moverios, seems there are more models now, obviously, might look at getting a pair finally.

[2020-03-12 15:54:36] originaldobo007 : I bet the smart RC or the RC+ benchmark at like an iPhone 4 level. Even the iPhone 5S was 64bit.

[2020-03-13 13:45:40] chipmangini : @catalinaskirace I got these first:<https://www.rochesteroptical.com/product/epson-moverio-bt-300-fpv-vr-combo/> and they are awesome, but the the Android controller is somewhat outdated. Getting the Rochester Optical FPV goggles is just amazing, and meets with the FAA regs of having VLOS, because you can see through the image. Then I purchased just the HDMI box from these and use a tablet as the controller: <https://www.rochesteroptical.com/product/epson-moverio-bt-35e/>. Now to find a way to use the Note 8 as the controller and it's HDMI out at the same time. Working on it.....:stuck_out_tongue_winking_eye:

[2020-03-14 16:38:21] dronepilot : Nice hd glass Moverio. I’m enjoying the dji goggles with the M1 on the M2 it suck.

[2020-03-16 17:16:19] bobdole : guys its been a while... any update on coronavirus effect on plans to update news on eta of update news of NLD update delays due to the coronavirus

[2020-03-16 17:22:23] pross : I think the delay was delayed

[2020-03-16 17:26:45] bobdole : i just found a box of 3m n95 masks. i made the mistake of checking on what they're going for on craigslist and i now feel evil...

[2020-03-16 17:27:05] bobdole : maybe i'll only sell one to persons over 60

[2020-03-16 17:32:22] cs2000 : Coronavirus has not yet impacted NLD at all. No impact on development. Yes, we're late and yes we've said it before, but its close :slightly_smiling_face:

[2020-03-16 17:43:31] cantrepeat : Soon™

[2020-03-17 15:47:14] fstephan1 : The corona virus indirectly attacks NLD. He kills as many DJI customers as possible. And thus also possible buyers of your app. So hurry up before nobody is left. :wink:

[2020-03-18 12:07:09] cs2000 : Something That starts with a 2 in its release number

[2020-03-18 12:17:52] cantrepeat : TooSoon™

[2020-03-18 15:24:20] originaldobo007 : 2022

[2020-03-18 19:12:48] 007 : 2022 ? coronavirus maybe 2025

[2020-03-20 14:27:23] fstephan1 : There will then be many ghosts who cannot rest in peace without an update. These will be haunted by the NLD people.

[2020-03-20 14:34:07] fstephan1 : There will then be many ghosts who cannot rest in peace without an update. These will be haunted by the NLD people.

[2020-03-21 00:48:15] luckfish1985 : ~nld

[2020-03-21 00:48:44] luckfish1985 : !nld

[2020-03-21 01:24:30] bobdole : anyone elses's mavic 2 controller batteries dying super fast? I think I get through 2 mavic 2 batteries before the controller is at 26%

[2020-03-21 01:24:45] bobdole : maybe its fast charging my phone

[2020-03-21 01:25:33] mel69hash : Mine same. Tried to fine a replacement online but couldn't find one

[2020-03-21 01:25:43] bobdole : are you using 1.8w boost?

[2020-03-21 01:25:54] mel69hash : Nope

[2020-03-21 01:25:59] bobdole : how hard is it to replace the battery? ... or upgrade it

[2020-03-21 01:29:49] mel69hash : I've soldered a + - lead with xt30 so I can connect any spare lipo/lihv bat externally. For a handy finger like me I should say its pretty easy as I've done many mods

[2020-03-21 01:30:48] mel69hash : Bought a MP RC bat but it's different bat connector.

[2020-03-21 01:36:58] bobdole : can yous how me this and what battery?

[2020-03-21 03:37:32] bobdole : would something like this be what you used? <https://www.amainhobbies.com/reedy-zappers-hv-sg2-1s-110c-lipo-battery-3.8v-6600mah-asc27339/p873523>

[2020-03-21 03:38:39] bobdole : also... i'm assuming you hook it up when both batteries are fully charged and just leave it sitting there?

[2020-03-21 04:15:44] bobdole : i have a mavic air controller, but that battery is 2970mah 3.7v not the lihv in the mavic 2p.. maybe it doesn't matter

[2020-03-21 04:16:41] bobdole : gonna rip that shit out and wire them in parallel.. hope i don't get the magic smoke

[2020-03-22 03:29:46] ben_lin : If it's an Android then try root and disable USB charging when using remote.

[2020-03-22 04:08:23] mel69hash : You can do it. Just be a little careful with the tiny ribbon cable connector flip lock. I've ever dismount it and putting back on takes weeks as I dont hv steady hands.

[2020-03-25 01:23:18] monkeyman : mavic enterprise dual 01.01.400 not supported yet?

[2020-03-25 01:24:30] monkeyman : at least for boost

[2020-03-25 20:43:10] flymymavic : Got someone on dji modding group claiming NFZ removal on M2, thought that wasn’t cracked yet

[2020-03-25 20:57:16] quad808 : Only on firmware .0100 for the M2's

[2020-03-25 21:11:23] digdat0 : the guy says he used NLD to secure the nfz removal on earlier fw version

[2020-03-26 13:56:19] fstephan1 : I own Mavic 2 Enterprise , Inspire 2 , P4 pro v2.0 and more, if you need beta tester, write me.

[2020-03-28 20:11:13] ben_lin : Just a quick note, I have both the P4P1.0 and M2P in a Chinese NFZ as I am home now

[2020-03-28 20:11:29] ben_lin : so if you guys need any funky testing regarding those hit me up

[2020-03-28 20:11:46] ben_lin : got both ios/android on hand

[2020-03-28 20:13:35] lolo780 : Special NFZ?

[2020-03-28 20:15:09] ben_lin : not the Beijing one

[2020-03-28 20:15:19] ben_lin : AFAIK thats the only hardcoded one

[2020-03-28 20:15:30] ben_lin : standard airport nfz

[2020-03-28 20:16:28] ben_lin : haven't upgraded my m2 in ages and probably wont ever lol

[2020-04-01 01:14:23] fredmicrowave : NLD v2.01 finally released ! Among several goodies, it now supports M2 up to .510 : <https://nolimitdronez.com/mavic-2-info>

[2020-04-01 01:59:25] cat.db : where is download link ?

[2020-04-01 02:12:40] cat.db : @fredmicrowave

[2020-04-01 02:13:06] cat.db : i see is still 1.9.3.7

[2020-04-01 02:17:45] ki4gyw : Someone is way early on april fools

[2020-04-01 02:21:45] cat.db : :joy:

[2020-04-01 02:27:25] cat.db : happy fools day

[2020-04-01 07:54:03] cs2000 : You know what, i should be annoyed, but thats pretty funny :wink:

[2020-04-01 08:09:38] fstephan1 : 1. April fool

[2020-04-01 10:49:48] oakley75 : @cs2000 +1

[2020-04-07 14:07:25] dronepilot : Any fcc mod for phantom 4 advanced?

[2020-04-07 14:07:51] dronepilot : Built in screen rc.

[2020-04-07 21:41:49] cantrepeat : <https://nolimitdronez.com/birdmap>

[2020-04-07 23:09:21] dronepilot : I just checked nld bird map it doesn’t have fcc. Any way around to fcc this Rc GL 300e?

[2020-04-08 10:34:14] ben_lin : No, I've had this exact problem and never got around it. Best way to do it is get a regular remote.

[2020-04-08 18:24:13] dronepilot : If the fcc could be patched directly to the bird like the M1, M2 would work nicely.

[2020-04-10 15:42:10] fstephan1 : Any Ghost... ahm updates seen?

[2020-04-12 23:52:43] dronepilot : Phantom 4 v2.0 will have nld support on .500 firmware?

[2020-04-13 00:54:54] originaldobo007 : Doesn’t look like NLD2 is coming anytime soon. Was supposed to be January.

[2020-04-13 02:22:29] dronepilot : Same though StanLee.

[2020-04-14 17:16:07] bobdole : so did dji slip the M1P the evil ninja firmware update or was it spared?

[2020-04-14 21:56:37] dronepilot : Hey guys P4P V2.0 doesn’t enter debug assistant. I’m trying to remove auto landing and at nld parameters show the battery, but do i have to pay just to change the battery number?

[2020-04-16 04:37:49] dnacho : I think the site it down

[2020-04-16 04:37:56] dnacho :

[2020-04-16 04:38:11] dnacho : Also any chance on supporting the mavic mini?

[2020-04-16 06:02:44] elintnl : NLD down?

[2020-04-16 06:04:45] czokie : It would appear so.

[2020-04-17 15:40:13] webmaster : I think the links on the Homepage went nuts :D

[2020-04-18 04:33:42] vab53 : I have a MP1 (01.04.0300) and a MP2Z (01.00.0100) both with NLD licensed mods. Can I install both versions of the Go software on the same device (Nvidia Shield Tablet) for both aircraft? MP1 -- NLD 4.1.22 and DJI Go 4 -- MP2Z? Thanks in advance.

[2020-04-18 07:00:36] webmaster : @coldflake Can you verify if this is only on english page?

[2020-04-18 14:59:27] chipmangini : @vab53 You can install NLD 4.1.22 and DJI Go 4 (from the play store) on the same device. I have it that way on several of my devices, and they play fine with each other....

[2020-04-18 15:38:07] bobdole : i had so many versions of go i forgot which was which

[2020-04-25 04:44:13] ki4gyw : CRICKETS!

[2020-04-26 11:37:55] flymymavic : Website SSl certificate has expired, can someone fix it please

[2020-04-26 11:38:11] flymymavic : @coldflake

[2020-04-26 12:44:08] coldflake : Yes I will be on it

[2020-04-28 12:56:32] pingspike : any news on the SSL update @coldflake mate? it's having a knock-on effect with the RSS feed too

[2020-04-30 14:36:24] abdo054 : Any news on NLD 2.0?

[2020-05-01 16:42:12] 007 : They survive the corona

[2020-05-04 07:42:54] ki4gyw : <https://github.com/district-michael/fpv_live> Looks interesting.

[2020-05-10 10:13:43] coldflake :

[2020-05-10 18:40:15] dronepilot : Any love on the Phantom 4 v2.0? Really wanted to downgrade the firmware and have some fcc + boost.

[2020-05-11 03:01:37] digdat0 : thats a nice looking screen coldflake

[2020-05-11 09:35:10] fstephan1 : @rgf8aerial, if you have .22.00 no Problem, if you have .50.00 you fucked by DJI

[2020-05-11 10:23:32] dronepilot : Yep I’m on .500 that’s what the bird came on.

[2020-05-11 11:20:41] amanita : Is NLD site down? I am getting "internal server error"

[2020-05-11 12:39:27] flymymavic : Yeah sites down @coldflake put some money in the meter mate

[2020-05-11 13:35:11] coldflake : It's up again

[2020-05-12 15:04:02] fstephan1 : NLD gone? -> <https://nolimitdronez.com/de/boards/topic/3599/whats-going-on-where-are-any-updates#5377>

[2020-05-12 21:38:30] digdat0 : i dont think so, coldflake posted a new screen just a few days ago ..

[2020-05-13 15:30:31] cs2000 : No, we havent gone anywhere, dont panic

[2020-05-13 15:58:46] d95gas : will have been created by the same people who keep pestering the team with "is it ready yet"..... NLD still alive and kicking and making progress I reckon :wink:

[2020-05-14 01:27:22] rickw001 : glad I kept mavic pro and didn't get a mav2

[2020-05-14 02:57:44] originaldobo007 : And Mav 3 is likely on its way.

[2020-05-14 12:49:26] rickw001 : and you know if they can't 2 they can't fix 3,lol

[2020-05-14 15:24:18] originaldobo007 : I would hope they can at least access some params like the ascent/descent speed, battery type, etc.

[2020-05-14 18:24:38] rickw001 : hasn't happened yet

[2020-05-14 19:33:04] originaldobo007 : I'm not even sure if NLD is working on support for the MA2 yet and if any of them even have a MA2....

[2020-05-14 19:39:28] 007 : Let's buy them

[2020-05-14 20:21:53] rickw001 : I meant mav pro 2,lol

[2020-05-15 13:08:51] fredmicrowave : Mavic Pro 2 ( and zoom) are supported up to V .100. It works great, you just have to get a mavic manufactured before 06/19 (iirc) and that has never been updated. It is still possible.

[2020-05-16 12:15:04] flymymavic : Seems you Americans may face a shortage of quads from reading this [https://www.suasnews.com/2020/05/steptoe-secures-itc-win-for-autel-in-patent-dispute-with-dji/](https://www.suasnews.com/2020/05/steptoe-secures-itc-win-for-autel-in-patent-dispute-with-dji/)

[2020-05-16 12:47:05] originaldobo007 : This is already being discussed in the general channel. Good to see DJI in trouble. Looks like they might be fucked.

[2020-05-16 16:43:52] bobdole : Didn't we think they were screwed over this 2 years ago?

[2020-05-16 17:43:45] quad808 : They will pay there way out of any trouble. They have money to burn...May be great for Autel though...

[2020-05-19 11:24:59] mldma : nldapp cannot be opened here

[2020-05-19 12:57:13] pingspike : opens ok here (UK) - where is "here" where you are @mldma ?

[2020-05-19 23:25:16] quad808 : NLD is blocked by the wisdom of the Chinese government because we pissed off DJI.

[2020-05-20 00:30:57] hotelzululima : one COULD use a VPS as a VPN endpoint(I do same an route a lot of my traffic via either amsterdam or san jose)

[2020-05-20 00:32:03] hotelzululima : course I am running NLD in a win 8.2 vm which makes it trivial to capture all its traffic for redirection

[2020-05-20 07:50:38] mldma : Still not working

[2020-05-22 21:39:07] bobdole : china you try too hard. makes you look foolish

[2020-05-31 17:31:46] nublish101 : Any idea why after a reflash nld can't apply fcc patch

[2020-05-31 17:32:20] nublish101 : Or signal boost patch on mavic pro plat 01.04.0300

[2020-06-01 16:47:16] flymymavic : Because the FW flash doesn’t get rid of the FCC already applied,

[2020-06-01 18:34:00] coldflake : It should be able to apply the patch on top

[2020-06-01 18:34:52] coldflake : Go to [support.nolimitdronez.com](http://support.nolimitdronez.com) and create a ticket and include your serial number as shown in nld

[2020-06-01 18:35:05] coldflake : Then we can look into the log and see what went wrong

[2020-06-01 18:52:34] bin4ry : i don’t get why everybody always flashes firmware for no reason. use one firmware mod it and don’t update if not needed!

[2020-06-02 03:42:40] dronepilot : Totally agree @bin4ry

[2020-06-02 04:32:13] nublish101 : I reflashed due to me messing with the camera firmware and complete stuffing it so it was a require reflash and I tried to apply the new boost since I hadn't done it since it came. Out and that's when I realised it wasn't wanting to take it or the fcc patch

[2020-06-02 04:32:57] nublish101 : @coldflake I'll. Submit the report tomorrow when I get up well should I say later today as it is 5:32 now and I only. Just got to bed heh

[2020-06-02 04:34:19] coldflake : Cool, we will have a look at it. Sleep well :)

[2020-06-02 04:40:35] nublish101 : Yeah I was attempting to see if I could force 60mbps on 1080 and 2.7k its turns out what I though dictated bit rate didn't or it did but it didn't like it

[2020-06-02 20:47:10] quad808 : @nublish101 realize what NLD does and doesn't do. It won't "fix" your drone because you messed with it and fucked it up. If that is the case.

[2020-06-02 21:32:51] hotelzululima : should we mention DDD( he says sotte voce, then ducks and scuttles to stage left)

[2020-06-04 11:13:24] dexlarpsn : So hyped for v2. @coldflake really good job, and I hope you didn't took too much care of the shitty comments you've recieved on the blog and focussed on the good ones. People must have patience, I am sure it will be worth the wait after all. Good job :)

[2020-06-04 11:20:04] cs2000 : @dexlarpsn nothing new. We know NLD 2.0 is late compared to when we said it would arrive, but things take time and it will be out soom

[2020-06-04 11:31:03] fstephan1 : Price war? - <https://drone-hacks.com/buy-license>

[2020-06-04 11:32:32] cs2000 : Drone-Hacks can charge whatever they want. Il pick up a license later to see what its all about.

[2020-06-04 12:22:19] originaldobo007 : I think there is room for both. Competition is good. BMW and Mercedes can coexist.

[2020-06-04 13:08:21] cs2000 : Competition, as long as its friendly is probably a good thing for the scene. Look how AMD coming back to the CPU scene has made Intel have to innovate. As long as both players behave its fine IMO.

[2020-06-04 13:11:56] markeviciusmodestas : If NLD brings something new on the table for the Mini, I'll get the NLD license as well just to support the development.

[2020-06-04 15:23:10] flymymavic : @cs2000 well they are using the DDD tool from what i can see so you should get a free licence

[2020-06-04 15:25:53] cs2000 : @flymymavic i am talking to them about their use of DDD. Fundamentally i dont have an issue as long as people work/negotiate **with** me rather than against me unlike some people _cough_ brett _cough._ DDD's resources cost me money and dont come for free. Luckily, they are being co-operative.

[2020-06-04 15:26:44] flymymavic : glad to hear it mate, im taking a look at it now as it says mavic mini

[2020-06-04 15:29:31] d95gas : Well.... Little shocked by this new player to the table, but I have to say, my loyalties are totally NLD regardless :100:

[2020-06-04 15:30:27] ttqyswne : Just to avoid any negative feelings, ive created ~dronehacks . Dont want to Spam the NLD channel with Drone-Hacks stuff, so can we move any DH chat over there please :)

[2020-06-04 15:30:33] d95gas : I've seen all the work that went into this from day 1 when nobody was doing anything, I've seen the hours the team have burned at the expense of their "Day Job" and their family, to bring us the goodies.

[2020-06-04 16:01:01] flymymavic : @cs2000 mate why are the mavic mini firmware files in TAR format

[2020-06-04 17:24:00] cs2000 : Some are mate, just depends how they were picked up. Theirs nothing special about them, you can just change the file extension to .bin and it will still work for flashing in NLD

[2020-06-04 17:38:31] coldflake : Maybe we should start selling our license for 1€? The more the marrier as they say ;)

[2020-06-04 18:13:58] flymymavic : @cs2000 cheers mate

[2020-06-05 15:09:55] pingspike : Summer Sale :man_dancing::skin-tone-2:

[2020-06-05 15:26:31] dexlarpsn : Nice! Gonna pick a license once I know what NLD can do on the new M2 firmwares

[2020-06-05 15:27:30] loaderbull : Anyone got anything that can enable FCC on a Inspire 1? Firmware wise i mean. I’m on iOS so no apps.

[2020-06-05 15:41:08] pingspike : does Litchi force it back to CE mode? :thinking_face:

[2020-06-05 15:45:32] loaderbull : Not sure...? Will post in ~general too to see if anyone has anything for the Inspire 1

[2020-06-05 17:10:11] dronepilot : NLD down?

[2020-06-05 17:11:06] originaldobo007 : Appears that way. IMO not a good thing to be happening given the current competition.

[2020-06-05 17:11:42] loaderbull : Could be updating site...?

[2020-06-05 17:11:46] originaldobo007 : I would also hope that NLD 2 comes out as promised on Sunday. If not, it just lends more credence to the competition as well if one service can't deliver...

[2020-06-05 17:13:15] quad808 : @coldflake needs to kick the server

[2020-06-05 17:18:35] quad808 : Kicked. Re-started.

[2020-06-05 17:26:09] dronepilot : thanks

[2020-06-05 17:43:55] dexlarpsn : @originaldobo007 Just saying but you are acting like a dick. Competition is in no thing a bad thing, and NLD nor DH gives a shit about both being their competition. You are just pushing the devs to release it. That makes non sense. Because a server is down for 5mins "Not a good thing given the competition". Please man.. have some faith, and if you believe more in DH this is not your channel.

[2020-06-05 17:45:27] 007 : :call_me_hand:

[2020-06-05 17:52:38] originaldobo007 : Sorry - not trying to create any issues. All I'm saying is that when competition is around, reliability and updates are more critical for a business if one wants it to thrive

[2020-06-05 17:52:44] originaldobo007 : Not saying anything controversial.

[2020-06-05 17:53:10] originaldobo007 : No one can deny that NLD has been lagging quite a bit. NLD 2.0 was promised all the way back in January.

[2020-06-05 17:53:31] originaldobo007 : Last week it was stated that it would be released on Friday.

[2020-06-05 17:53:36] originaldobo007 : Now "Sunday"

[2020-06-05 17:53:47] originaldobo007 : Look - I love the NLD guys. They are an amazing bunch

[2020-06-05 17:54:04] originaldobo007 : I support them and have given them free gear.

[2020-06-05 17:55:15] originaldobo007 : But both NLD _and_ DH should be pushed to release. I suspect, when the M3 comes out, the first to have any type of support - param access, etc - even if no altitude or nfz support - will get a lot of business.

[2020-06-05 17:55:46] originaldobo007 : There's good money here and plenty of room for both to exist, as long as both offer updates in a reasonable amount of time.

[2020-06-05 18:13:23] quad808 : @dexlarpsn @originaldobo007 is a good friend to NLD....great guy, so don't break his balls.

[2020-06-05 18:14:53] quad808 : as a consumer and drone guy....competition is good in the end. Pushes everyone forward and we as consumers win. Not worried. Its all good!

[2020-06-05 18:15:10] dexlarpsn : @originaldobo007 My bad. I really interpreted your messages as a hate to NLD. :) Dont take it too seriously!

[2020-06-05 19:47:42] fstephan1 : Summer sale not working paypal charge 35$ not 20$ .... What about a special deal to register 3 dones intand one. Most own more then one drone.

[2020-06-05 19:56:33] quad808 : I think the banner was wrong on the pricing. Don't know about special pricing for multiples....sorry bro, not involved in that end of the business.

[2020-06-05 20:16:41] fstephan1 : :disappointed: 20$ was fine, i own 4 drones.....

[2020-06-05 20:17:33] fstephan1 : But i waiting for the new birdmap

[2020-06-05 20:31:06] cs2000 : Banner is all corrected, seems Coldflake has had one too many beers this evening haha, sorry for the confusion!

[2020-06-07 00:21:25] tsun : looks like NLD is down?

[2020-06-07 00:22:22] david218 : Yeah, been down since I checked earlier this evening.

[2020-06-07 03:11:25] quad808 : back up. @coldflake kicked the server, or maybe plugged it in, not sure which...LOL

[2020-06-07 04:19:56] david218 : @quad808 thanks, ordered!

[2020-06-07 12:49:43] dexlarpsn : Is v2 gonna launch today? Anyone has more information about that? :stuck_out_tongue:

[2020-06-07 15:31:53] loaderbull : was stated this weekend, but towards the end, being today...so who knows?

[2020-06-07 15:35:07] dexlarpsn : Yeah indeed... Lets wait I guess lol

[2020-06-07 15:48:25] fstephan1 : I only believe it when I see it.

[2020-06-07 16:16:30] dkovar : That is an offensive and inaccurate statement. Please delete it.

[2020-06-07 16:38:40] dkovar : Note: Offensive message deleted by me. Behave.

[2020-06-07 17:37:00] fstephan1 : The joke with the ghost was in februar on ~general ......

[2020-06-07 17:44:41] originaldobo007 : What's the over-under of NLD 2.0 being released today?

[2020-06-07 17:45:05] originaldobo007 : I'm guessing the bookie odds will be 99 to 1 it _won't_ be released.

[2020-06-07 17:45:44] originaldobo007 : In the meantime - enjoy:

[2020-06-07 17:45:56] originaldobo007 :

[2020-06-07 17:53:36] originaldobo007 : I'm sure there will be another "screenshot" of some version of "NLD 2" posted saying, "we are very close to releasing it.....It is worth the wait.....we are testing it....etc..etc."

[2020-06-07 17:53:59] originaldobo007 : But my guess is it is at least another few weeks out. At _best_.

[2020-06-07 17:59:11] originaldobo007 :

[2020-06-07 18:33:52] david218 : likely unpopular opinion, but I'd love for NLD to be a subscription service. It helps motivate faster and consistent releases in my experience as a consumer :stuck_out_tongue:

[2020-06-07 20:10:58] dkovar : They are highly motivated. The delays are generally due to how hard the problem is, not lack of motivation to solve the problems.

[2020-06-08 12:23:52] rickw001 : so much for Sunday,come and gone

[2020-06-08 13:53:34] originaldobo007 : What did I tell ya! How many times does the goalpost need to move before you learn to not listen even remotely to any release date that they say.

[2020-06-08 14:03:27] rickw001 : yep,they moved pretty fast when SuperPatcher came out,lol

[2020-06-08 15:30:27] digdat0 : id rather it be bug free and take longer to release, personally

[2020-06-08 15:48:33] mel69hash : Well if it come it comes

[2020-06-08 16:01:53] wj7106 : 。。。。。。

[2020-06-08 19:33:04] fstephan1 : UNTIL 19TH OF JUNE - but he not wrote witch year?

[2020-06-08 19:35:56] dexlarpsn : Guess he means the year 2030.

[2020-06-08 19:36:06] dexlarpsn : At that time v2.0 will also be released

[2020-06-08 19:36:09] dexlarpsn : LoL

[2020-06-08 19:43:29] originaldobo007 : The Mavic 5 will be out.

[2020-06-08 19:47:09] dexlarpsn : And then, once the Mavic 5 is out till it is supported, Mavic 10 is there

[2020-06-08 19:47:16] dexlarpsn : Just jokin'

[2020-06-08 20:47:59] originaldobo007 : NLD2 will come out alongside the Phantom 6.

[2020-06-08 20:48:22] originaldobo007 : And the Autel Evo 4 Pro.

[2020-06-08 21:43:57] rickw001 : maybe they're swamped with orders from price reduction and counting money,lol

[2020-06-08 23:44:36] fstephan1 : <https://www.tf.uni-kiel.de/matwis/amat/mw1_ge/kap_2/illustr/dagobert.jpg>

[2020-06-09 01:52:33] originaldobo007 :

[2020-06-09 08:23:51] heresmydron : holy shite, how high was it

[2020-06-09 09:22:40] dexlarpsn : @originaldobo007 Is that a Mavic Pro? Would love to do it with my Mavic 2 Pro though, my Mavic Pro has a shitty night cam sensor

[2020-06-09 11:48:30] originaldobo007 : Phantom 4 pro v 2. About 5000ft

[2020-06-09 13:35:23] heresmydron : noice

[2020-06-09 13:35:27] heresmydron : i wonder if a mini can go that high

[2020-06-09 14:31:38] originaldobo007 : I'd love to see if someone can do that with a mini. The problem I suspect, would be wind at higher altitudes.

[2020-06-09 16:28:45] flymymavic : @originaldobo007 I’d be lucky to get 200ft up, absolute hate my mini

[2020-06-11 14:32:41] coldflake : Hello Guys,

[2020-06-11 14:34:44] coldflake : Your frustration is heard fully! We are also very frustrated about the fact that we have not released v2 yet. We are working around the clock and I have not slept properly for weeks now :slightly_smiling_face: I can assure everyone that we are doing it as fast as we can and that it will drop any time soon. We have said that before, that is true but we would rather take the flame for under deliver and over promise rather than releasing something that is not 100% OK

[2020-06-11 14:35:16] coldflake : I hope that everyone will have some understanding for a little longer while :slightly_smiling_face:

[2020-06-11 14:35:25] coldflake : Back to the coding

[2020-06-11 14:36:27] coldflake :

[2020-06-11 14:36:50] coldflake : We are so busy that even the bugs are doing code review ;)

[2020-06-11 17:39:22] bobdole : he's asking you nicely to stop bothering his kids in your chip bag

[2020-06-12 11:10:54] fstephan1 : But you could at least publish the "Bird Map" so that you can see what is included in the 2.0. Nobody likes to buy a pig in a poke. Not even in the summer sale ...

[2020-06-12 15:03:58] 503496897 : nld won't open？

[2020-06-12 15:27:45] loaderbull : Not for me either

[2020-06-12 15:32:54] loaderbull : site down too

[2020-06-12 15:53:42] 503496897 : wth

[2020-06-12 16:10:54] reaktor : Yup, site is down

[2020-06-12 16:35:38] d95gas : Just noticed the "M2root.png" on Coldflake's desktop ....... Could this be a hint of things to come :grinning: or a tease :disappointed:

[2020-06-12 16:47:50] digdat0 : maybe its a new / updated site, with v2 :smile:

[2020-06-12 17:08:30] fstephan1 : Or they gave up the business.

[2020-06-12 21:37:08] originaldobo007 : *noreleasedronez v2.0”

[2020-06-12 22:41:48] flymymavic : Site down again ? @coldflake

[2020-06-13 00:35:52] rickw001 : no,still,lol

[2020-06-13 01:19:24] 503496897 : :-1::skin-tone-2::-1::skin-tone-2::-1::skin-tone-2::-1::skin-tone-2:

[2020-06-13 01:21:40] 503496897 : Nld's attitude and service to customers make them give up

[2020-06-13 01:22:45] poopnondji : Anyone have info on the new birdmap?

[2020-06-13 01:25:03] poopnondji : What new features was v2 gonna bring, or was it just a UI change?

[2020-06-13 03:11:56] originaldobo007 : My tribute to what NLD2 could have been....but appears to be no longer....

[2020-06-13 08:29:03] tsun : @originaldobo007 Looks like you have altitude limit removed on that P4Pv2, is the method available anywhere?

[2020-06-13 10:31:15] dexlarpsn : @mrmarecki I think he uses drone hacks not sure tho

[2020-06-13 10:48:50] tsun : oh, I didn't know it was possible on v2, but looks like they indeed have it

[2020-06-13 14:00:15] originaldobo007 : Drone hacks has it

[2020-06-13 16:27:08] dexlarpsn : Nld ran away

[2020-06-13 16:27:09] dexlarpsn : Loo

[2020-06-13 16:27:11] dexlarpsn : Lol

[2020-06-13 17:23:04] d95gas : I see the NLD App is also down, guessing Coldflake is hopefully doing the V2 updated :+1:

[2020-06-13 17:32:28] loaderbull : App and site been down for last 2 days

[2020-06-13 17:59:25] hotelzululima : its being rebuilt… for V2 be patient…

[2020-06-13 19:24:10] dexlarpsn : @hotelzululima How do you know that loo

[2020-06-13 19:25:04] dexlarpsn : A decent developer rebuilts on localhost, and not on the real website to assure no downtime is done. Kind of strange this whole thing, can be true tough, but seems unlikely to me

[2020-06-13 21:27:27] dkovar : @originaldobo007 Are you bored, or just a mean, petty person? If you don't like NLD, vote with your feet. You're on here every day bitching. Go do something constructive.

[2020-06-13 22:15:47] originaldobo007 : How’s this for constructive you piece of shit? I know NLD. I have worked with them plenty. I’ve donated thousands of dollars worth of gear to NLD. I support them more than you ever have. And they know me. Having said that- it is completely factual not state what I said. They didn’t deliver and they over promised and under-delivered. Period. But they are man enough to acknowledge that. And I hope they are working on what they’ve promised since January. But no- I’m not petty. And I do a lot more than bitching on here. I do more constructive things by accident in an hour than you do in a day. So you’re the one who’s mean and petty. Fuck you very much and have a nice day.

[2020-06-13 22:42:33] dkovar : Oooo, temper.

[2020-06-13 22:43:18] dkovar : If you've got a personal beef, take it up with them personally. Right now, you just look like a whiner.

[2020-06-13 22:52:02] dexlarpsn : @dkovar Actually you are the whiner and dick here.. I also pinged him a while back since he was outing weird stuff against NLD. He told me the same, that he donated stuff etc and knows them. I apoligzed myself, since I clearly misunderstood him. If you are man enough to speak to someone, be man enough to say sorry mybad if you are wrong. In fact you are just ignorning it and calling him a whiner.. Disgusting.

[2020-06-13 22:56:02] originaldobo007 : Look- it was likely the delays and incessant overpromising that caused the rise of Drone Hacks. I don’t care if you believe me @dkovar But I’ve given them a lot because I believe(d) in them.

[2020-06-13 23:45:42] dkovar : I've worked with them a lot as well. But if I have issues with them, which I do not, I'd take it up with them. If they've burned you, let it go and move on.

[2020-06-14 00:22:35] originaldobo007 : They didn’t burn me. Did I say that? Glad you’ve worked with them. They can confirm that you’re wrong.

[2020-06-14 07:30:32] bobdole : guys i have an update rumor on the news of an updated news of the update.. @coldflake was consumed by giant roaches

[2020-06-14 08:22:08] coldflake : Like it wasn't enough, the website and app server got bonged due to a windows update messing up the WIM beyond repair. Good news is that I am almost done reinstalling it all. This time it will be a cluster solution which will not only make sure that the site will not be down again, it will also improve the performance of the app server and the website. When bad things happen, there always comes something good out of it, it's all a matter of how one deals with it. I wanted to setup the cluster solution for months so now I had the opportunity and took it! Sorry for the downtime guys!

[2020-06-14 12:29:47] cantrepeat : Just because someone donates doesn’t mean they can’t be a petty dick. @originaldobo007 proves this every 30 days or so.

[2020-06-14 14:49:11] originaldobo007 : @catalinaskirace proves stupidity every couple days or so by confusing factual statements with being a dick. Take your micro-aggressions elsewhere.

[2020-06-14 15:47:46] david218 : *grabs popcorn*

[2020-06-14 16:15:18] originaldobo007 : Meh- I’m done with this disagreement. I’ll just step back and watch deadlines fall again.

[2020-06-14 22:48:12] bobdole : "DEADLINES"

[2020-06-14 22:49:45] bobdole : NLD YOU'RE FIRED.. @originaldobo007 is going to restaff your positions

[2020-06-14 22:49:55] bobdole : get your things... pick up your roaches

[2020-06-14 22:50:15] originaldobo007 : :rolling_on_the_floor_laughing::joy:

[2020-06-14 22:50:48] originaldobo007 : More like DroneHacks will provide new positions and options. Competition =good.

[2020-06-14 22:51:16] bobdole : i bet they'll be the hacker bitches you're entitled to

[2020-06-14 23:09:41] originaldobo007 : No one is entitled to anything. Other than businesses adhering to their word when they say something.

[2020-06-14 23:12:06] originaldobo007 : But I guess you haven’t noticed that in the other threads, etc- you know- that once a business loses the trust of customers it can be very hard to gain it back. It’s a good idea for companies to not overpromise and underdeliver. Just common sense. I’m not saying anything untrue or controversial.

[2020-06-15 06:05:22] webhdx : Why do you care so much?

[2020-06-15 11:20:30] cantrepeat : He likes to hear himself bitch about shit.

[2020-06-15 11:42:16] coldflake : Guys, NLD is now back up and running smoothly

[2020-06-15 11:42:20] fredmicrowave : I am perfectly fine with NLD. They have fulfilled what they promised: To unlock the drones - And they where the only ones to offer this. Updates are optional, to be considered as free bonus. Without them, the MP2 would have been useless . They allowed us to fly freely -and offline- People are so fast to turn their back when new doors open ...

[2020-06-15 12:08:33] rickw001 : where is V2 Fred?

[2020-06-15 12:14:25] fredmicrowave : I don´t know. To be released i guess. What do you need V2 for ?

[2020-06-15 12:18:10] rickw001 : that's another broken promise from NLD,to be released

[2020-06-15 12:29:13] coldflake : Broken promises and what not, well we have had some difficulties and we are trying out best, thank you for the "understanding"

[2020-06-15 18:07:07] cantrepeat : @originaldobo007 I understand shit happens because fuck you.

[2020-06-15 18:18:27] cantrepeat : It doesn’t matter if release slips one week or six months we’re guaranteed you’ll be the cunt you are.

[2020-06-15 18:33:17] originaldobo007 : Cool. Thanks.

[2020-06-15 18:33:46] originaldobo007 : Nice to see that you are good at sucking dick @catalinaskirace. Good job!

[2020-06-15 18:34:41] originaldobo007 : I said nothing controversial at all (other than factually calling you a dick sucker).

[2020-06-15 18:35:18] originaldobo007 : I get it. You have plenty of micro-aggressions to take out.

[2020-06-15 18:36:43] originaldobo007 : Again, I withdrew from saying anything after putting it out there that it's good to not under-deliver and over-promise. Seems like some people here have no business experience. That's fine too.

[2020-06-15 18:38:45] david218 : guys I'm going to run out of popcorn

[2020-06-15 19:07:55] originaldobo007 : I'll happily provide some.

[2020-06-15 19:08:12] originaldobo007 : For the record - coldflake is a great guy. Solid dude.

[2020-06-15 19:50:08] dylanholleman : Jezus

[2020-06-15 19:50:34] dylanholleman : Joined this channel just to see a couple of fags roast eachother and demanding updates

[2020-06-15 20:15:27] cantrepeat : @dylanholleman I’m the only fag, @originaldobo007 is a cunt mate. Sorry you got shorted.

[2020-06-15 20:18:37] originaldobo007 : [https://m.youtube.com/watch?v=ZV86OMUM7Io](https://m.youtube.com/watch?v=ZV86OMUM7Io)

[2020-06-15 22:25:08] dkovar : @originaldobo007 "Again, I withdrew from saying anything after putting it out there that it's good to not under-deliver and over-promise." You keep saying that you withdrew, and you keep taking cheap shots. So, withdraw already. BTW - many of us have a LOT of business experience. Chill out, you're just not as hot as you think you are.

[2020-06-15 22:26:31] originaldobo007 : It's not that I claim I'm "hot". It's that you specifically @dkovar, are a piece of shit. You've already been told by @dexlarpsn to STFU as you are the whiner and dick here. So you withdraw already. I get it. You're butt hurt and are looking at taking out that on me. It's ok. And in terms of business experience - sure I guess URSA Inc is ok with overpromising and under-delivering. That's not surprising coming from a guy who claims to have "founded the practice of UAV forensics in 2015". I'm sure many would beg to differ with that. But there are at least a dozen people who have pm'd me here saying that they fully agree with me - some who are quite well known. Now go along now. You have about a month or so of good weather left before the winter, Go outside. You're too much of an angry pasty white guy.

[2020-06-15 22:38:45] originaldobo007 : FYI - for an "analytics" and "security" platform, your "company" has a website that is amazingly not secure. I guess the irony is lost on you.

[2020-06-16 00:05:21] cantrepeat : @originaldobo007 making vailed threats. Yup, I’m sure of it now. You’re the fuck face I always thought you were.

[2020-06-16 00:05:36] originaldobo007 : Didn’t threaten anyone.

[2020-06-16 00:06:50] originaldobo007 : @catalinaskirace you’re the microagressive piece of shit I always thought you were.

[2020-06-16 00:07:06] cantrepeat : Yes, now what?

[2020-06-16 00:30:45] david218 : @originaldobo007 I'm a sucker for free food, I'll take you up on that if everyone else passes.

[2020-06-16 00:31:24] originaldobo007 : BwaHAHAHAH!! I’d totally buy dinner for everyone here. Even those who are pissed at me.

[2020-06-16 00:32:11] david218 : sweet, I just ordered pizza.

[2020-06-16 00:33:17] david218 : honestly pretty pissed, I was only going to buy a $8 pizza, but after 20 minutes of trying to get the stupid order to go through, turns out I need $25 of crap to get free delivery.

[2020-06-16 00:34:42] david218 : I spent half a NLD license on pizza. :disappointed:

[2020-06-16 00:36:15] rickw001 : and got more out of it,lol

[2020-06-16 01:08:42] digdat0 : I like thai food ...

[2020-06-16 02:28:57] originaldobo007 : In spirit I provide you a Pad Thai!

[2020-06-16 02:29:26] originaldobo007 : @david218 I hope it was good pizza.

[2020-06-16 17:05:59] david218 : The hrefs on <https://nolimitdronez.com/en/boards> are all messed up

[2020-06-17 12:24:23] reaktor : How can I fly offline? I need to be invisible to DJI Tracker box

[2020-06-17 15:41:59] coldflake : @david218 Thanks for informing about that. Yes, that is definitely a bug! Just remove /en and it will all be fine

[2020-06-17 15:42:15] coldflake : I will fix it when done with v2

[2020-06-17 15:42:54] coldflake : It is a bug in the multi language module. The site default lang is EN so /EN should not even be in the url

[2020-06-17 15:47:05] bobdole : i get a page not found when i go to <https://nolimitdronez.com/nld-mod-client-2000>

[2020-06-17 15:52:23] coldflake : '

[2020-06-17 15:52:23] coldflake : @jacksphone are you insinuating something? :slightly_smiling_face: Dont worry, that page will be found soon, we are working around the clock on it. The server crash (thank you for that Microsoft) didnt help on the release plan to be very honest, it pushed it 3 days, sorry for that.

[2020-06-17 16:43:34] fredmicrowave : Well just put your phone in airplane mode. I use a dedicated phone that i bought cheap because it was locked to some exotic provider . Wifi off of course. Kept the drone and phone offline since i got it and unlocked with NLD. You just can´t use maps with go4, but I don´t miss them.

[2020-06-17 16:44:48] fredmicrowave : I don´t even have a SIM card in of course.

[2020-06-18 03:28:21] ben_lin : Software engineering isn't exactly easy, especially when you're a small group of people with not much fund to tackle a big dickhead like DJI

[2020-06-18 03:29:23] ben_lin : People who knows tech and sw/hw knows this, I am just glad NLD fucking exits at all, and people need to lower their expectations here

[2020-06-18 03:30:46] ben_lin : otherwise its just gonna be pure disappointment. NLD group's deadlines can't be that concrete at all since you know, they aren't getting paid 10k per month

[2020-06-18 12:05:46] rickw001 : another suck-up

[2020-06-18 13:22:13] dkovar : OK. Enough. Any more personal insults aimed at NLD or other members in this channel will get you booted without any warning.

[2020-06-19 00:45:42] cantrepeat : Das boot!

[2020-06-19 00:47:19] cantrepeat : For the record I’m a fanboi of NLD and anyone else that works to free us from DJI!

[2020-06-19 00:48:49] cantrepeat : I’m not gonna insult @originaldobo007 but he can eat my shit and I’ll take the ban for it.

[2020-06-19 02:17:19] originaldobo007 : Cool. Let’s see if the ban can be applied as stated.

[2020-06-19 16:27:40] originaldobo007 : Guess the new moderator @dkovar isn’t willing to step up and ban him. Surprise surprise.

[2020-06-19 16:36:42] dkovar : Nope, just waiting for someone to clearly be an idiot.

[2020-06-19 16:37:24] dkovar : He's gone.

[2020-06-19 16:37:45] dkovar : And @catalinaskirace, don't do that again.

[2020-06-19 17:27:22] flymymavic : :rolling_on_the_floor_laughing::rolling_on_the_floor_laughing::rolling_on_the_floor_laughing::rolling_on_the_floor_laughing::rolling_on_the_floor_laughing::rolling_on_the_floor_laughing:

[2020-06-19 18:50:13] cantrepeat : @originaldobo007 cry harder man. You’ll be back in a week poking the missed release dates bear and making an ass of yourself over it.

[2020-06-19 18:58:03] dkovar : Enough. Seriously. Take it somewhere else.

[2020-06-19 19:09:30] dexlarpsn : @dkovar Any reason why you ban StanLee instant, but still are asking CantRepeat to stop? Is it because you felt assaulted yourself by StanLee, and CantRepeat didn't insult you? Rules are rules..

[2020-06-19 19:10:20] dexlarpsn : Oh lol, I saw deactivated profile before. Nevermind I guess

[2020-06-19 20:19:11] rickw001 : who's gone?

[2020-06-19 20:26:55] dkovar : Everything is back to normal.

[2020-06-19 20:27:29] cantrepeat : Because I’m not the one trying to jam up NLD in their house!

[2020-06-19 20:28:46] cantrepeat : If I was the mod he’d been gone 6 months ago.

[2020-06-19 21:55:18] dexlarpsn : @catalinaskirace Please man, behave and let it go..

[2020-06-19 21:55:32] dexlarpsn : Have some fun modding drones or smth

[2020-06-19 21:58:40] originaldobo007 : No one is gone.

[2020-06-19 21:59:22] originaldobo007 : I am back. Like Lazarus. But hypocrisy needs to stop as well.

[2020-06-19 22:00:01] originaldobo007 : But @dkovar did not bring me back.

[2020-06-19 22:00:24] originaldobo007 : Everyone stop and we can get back to modding drones.

[2020-06-20 00:44:29] cantrepeat : You’re the one that started this mess with running your pie hole about NLD in their channel and now you want everyone to stop. I’ll be the first to tell you to fuck off when you do it again.

[2020-06-20 00:45:48] cantrepeat : You want everyone, read me, to stop? Then don’t start.

[2020-06-20 00:47:10] cantrepeat : Shit happens with indie software releases. Don’t turn into a fuck face over it.

[2020-06-20 00:48:53] cantrepeat : Go read redditt or something.

[2020-06-20 02:36:42] bobdole : contact customer service or escalate your concerns to @coldflake's boss

[2020-06-20 04:07:56] originaldobo007 : Final warning @catalinaskirace Stop digging. You have too many demerit points already and can’t afford any more. You’ve been warned by Colonel Klink and others.

[2020-06-20 07:29:43] coldflake : @jacksphone I am the boss ;)

[2020-06-20 13:33:13] originaldobo007 :

[2020-06-20 13:57:51] cantrepeat : Lol @originaldobo007 like you have any status to warn anybody here.

[2020-06-20 13:58:33] cantrepeat : It’s simple, don’t go off the deep end and you wont hear from me

[2020-06-20 14:08:46] cantrepeat : And this was never about me or you and me. This was about you and only you. It was about your childish reaction to a missed release date of an indie software project. The never ending daily bashing got old to a lot of users here. End of line

[2020-06-20 14:53:18] originaldobo007 : You are at the end of the line. Many people are frustrated about constant missed promises- that’s a fact. I’m not attacking anyone. Coldflake is a great guy. But I’m stating a fact that many people agree with. Now run along.

[2020-06-20 15:05:21] cantrepeat : ^^ is still not running along.

[2020-06-20 15:18:20] originaldobo007 : :+1::skin-tone-3:

[2020-06-21 18:14:30] cs2000 : Both of you just behave please. Let’s all play nicely! If you can’t get along, just don’t talk :blush:

[2020-06-21 18:44:47] cantrepeat : Happy you got strong swimmers day.

[2020-06-21 18:45:03] cantrepeat : Cross posted for your enjoyment!

[2020-06-23 15:26:17] flymymavic : @coldflake is this true ? [https://m.youtube.com/watch?feature=youtu.be&v=CRoWAWaZzVI](https://m.youtube.com/watch?feature=youtu.be&v=CRoWAWaZzVI)

[2020-06-23 15:26:55] coldflake : It might be yes

[2020-06-23 15:30:57] flymymavic : Interesting

[2020-06-23 15:33:24] d95gas : Sorry but got fed up watching it, taking too long to say a few words..... My pet hate :slightly_smiling_face: I am not being rude about it, but life is rushing past fast and I just want to see the facts..... Sorry guys, please dont take it the wrong way.

[2020-06-23 15:34:05] flymymavic : Always the way with a lot of YT guys, say it and move on

[2020-06-23 15:37:09] d95gas : :+1: The reason why I don't watch too much YouTube stuff ....... It ages me!! and gets me all moody.

[2020-06-23 15:37:59] d95gas : So the big question then......... And I'm sure Coldflake knows its going to be asked a zillion times......... any release date being indicated?

[2020-06-23 15:53:09] fredmicrowave : Be careful this question could be considered as an insult

[2020-06-23 16:04:55] digdat0 : will NLD v2 support flashing modded newer firmware on the m1p, p4pv2, i2, etc?

[2020-06-23 16:11:16] fredmicrowave : I would like so much to see altitude unlocked ...

[2020-06-23 16:32:32] dylanholleman : Ah shite

[2020-06-23 16:32:49] dylanholleman : NFZ removal not supported in v2 :(

[2020-06-23 17:48:05] rickw001 : just another tease

[2020-06-25 08:57:51] dexlarpsn : @dylanholleman Where do you see that?

[2020-06-25 19:14:02] dylanholleman : In the video of the person who emailed NLD @dexlarpsn

[2020-06-25 19:36:26] fstephan1 : The person in the video talk a long time, and realy he say nothing. Worst only my livetime.....

[2020-06-25 20:57:31] dylanholleman : He shows proof with that mail

[2020-06-25 21:35:59] digdat0 : this is the email from the vid: <https://imgur.com/mnovqSl>

[2020-06-25 22:44:21] dexlarpsn : @fstephan1 Agreed, lol. I want that 7 minutes of my life back

[2020-06-25 22:45:26] dexlarpsn : I kinda not understand that screen. Does it mean tbat NFZ will be available in 2.1 and not 2.0, or that a downgrade option will be available in 2.1 but not in 2?0?

[2020-06-26 00:13:21] originaldobo007 : 2.0 is still months away.

[2020-06-26 08:58:53] dexlarpsn : Guess so lol

[2020-06-26 11:07:05] dylanholleman : 2.0 is weeks away

[2020-06-26 11:07:14] dylanholleman : I think

[2020-06-26 11:07:24] dylanholleman : More or less hope

[2020-06-26 13:11:40] rickw001 : sure is a lot of dreamers on here,lol

[2020-06-26 13:20:55] originaldobo007 : Well, 52 weeks in a year so we could be very well weeks away. I think NLD 2 has simply been “social distancing” before it became cool. Ahead of the curve!

[2020-06-29 23:39:24] bobdole : if you had really really deep pockets, someone out there might burn their hacks so you could fly your mavic 2 without any limitations at all. if not, we're lucky to get what we can get if we can get it.

[2020-07-02 12:49:51] flymymavic : Someone slating NLD, obviously didn’t read the blog post

[2020-07-02 12:49:54] flymymavic : [https://m.youtube.com/watch?feature=youtu.be&v=Af9E-QpVZxQ](https://m.youtube.com/watch?feature=youtu.be&v=Af9E-QpVZxQ)

[2020-07-02 14:30:37] fstephan1 : NLD should publish Bird-Map v2.0 urgently so that everyone can see what can be possible.

[2020-07-02 14:58:14] rickw001 : how can they do that if nothing works?

[2020-07-02 15:00:14] dexlarpsn : Man this dude is doing a 10 minute talk of something which is clearly stated. Just not in "BIG RED LETTERS" as he wishes. That dude really needs to get a trophy for making a 1 minute story into 10 minutes and making it bigger than it is in reality. Lol

[2020-07-02 15:00:48] rickw001 : how is it bigger than it is?

[2020-07-02 15:03:49] dexlarpsn : @rickw001 This is not NLD's problem, but he is taking NLD as the one to blame. He clearly did not read the NLD website. Such a big problem DJI did anti rollback, yes.. shuch a shame that's NLD fault!

[2020-07-02 15:04:49] rickw001 : it is NLD problem,how many promises broke?how many deadlines missed

[2020-07-02 15:05:24] dexlarpsn : Thats another story, that's not what that video is about. Dont turn the story lol

[2020-07-02 15:06:17] dexlarpsn : Thats specific thing is not NLD's problem. I was replying onto that video, and not on your misbehaviour and non-patience mind.

[2020-07-02 15:07:49] rickw001 : haha,non-patience,good thing no one held their breath for 2.0,by the way,what was the promised date for that,LOL

[2020-07-02 15:17:22] fredmicrowave : Birdmap on NLD is pretty clear , I don´t know why this guy did not see it.

[2020-07-02 15:19:22] dexlarpsn : @fredmicrowave Ready to laugh? His 10 minute video is about the fact that it is not stated IN BIG RED LETTERS by NLD, and therfore NLD is ripping off customers

[2020-07-02 15:19:33] dexlarpsn : :joy:

[2020-07-02 15:29:19] fredmicrowave : That´s a bit sad actually, how a guy can ruin a reputation or business by not reading what he is purchasing, and just being ... what he is.

[2020-07-02 15:53:13] digdat0 : i think i need to make my videos more full of bullshit, no substance .. and will then get more viewers and profit /s ... seriously, ill never get that 9 mins back

[2020-07-02 15:58:02] d95gas : why say something in 1 minute when you can say it in 15 :slightly_smiling_face: Guy is just a wind bag and should be ignored, or Coldflake hit him with a gagging order :slightly_smiling_face:

[2020-07-02 16:07:38] flymymavic : ... seriously, ill never get that 9 mins back You actually watched the whole 9 mins Steve, man I just skipped through it, I’ve left a post on his comments

[2020-07-02 16:08:50] bin4ry : lol what a bs video

[2020-07-02 16:21:49] d95gas : Yes I have also left a comment or 2, what the hell is wrong with these people, got nothing else in their life. As I said in my comments, nobody forces you to mod your drone, its your choice, and you should investigate, read all the pro's and con's and then decide if its for you........ Don't just do it..... then moan.

[2020-07-02 16:35:09] flymymavic : Think I’ll do a video in response to this video

[2020-07-02 16:39:28] bin4ry : please make it 30 minutes minimum

[2020-07-02 17:34:58] digdat0 : @flymymavic in it to win it! i just listened in the background while working on a spreadsheet

[2020-07-02 21:48:45] digdat0 : my boss in real life is a clone of lumbergh from officespace

[2020-07-02 22:22:22] originaldobo007 : You work at Initech!!!!

[2020-07-03 01:24:18] mel69hash : Lol that guy pays thousand for DJI to dig his asshole with beer bottle with rgd to data handling and make a big hooohaaa with paying nuts for making his AC flies good.

[2020-07-03 02:55:40] bobdole : now i understand your handle

[2020-07-03 02:56:43] bobdole : it was the next STP album you would have recorded, isn't it scott?

[2020-07-05 09:29:10] flymymavic : I just watched the video again, and to be fair, the guy is right, the FAQ on NLD is wrong, it does say you can use the DJI asst to downgrade, it also mentions 1.003 as being a fix for it, I think to be fair the FAQ needs a full overhaul with correct info,

[2020-07-06 00:13:49] hazardc : i don't remember the moment i realized all the dji ppl on YT were shilling their asses off for DJI, but it was a nice feeling.

[2020-07-06 03:51:47] coldflake : Hello everyone, I have been down with the covid virus for 3 weeks or more. Obviously that foiled the release date of NLD v2. Thank you so much to the guy in China who had to eat something disgusting! Picking up where I left today or tomorrow to fix the last few bugs reported.

[2020-07-06 06:06:00] bobdole : get better man, don't worry about the trolls

[2020-07-06 07:23:16] dexlarpsn : Ow shit, get better man! Dont forget to take care of yourself

[2020-07-06 11:24:53] d95gas : @coldflake take it easy bud,its bloody nasty and tires you out even after recovery, we will all still be here, just dont going burning yourself out and making things worse....... Yep we have a great deal to thank China for, and their love of digesting some weird stuff!!! No disrespect to anyone meant.

[2020-07-06 15:21:09] bobdole : the moment i realized google/youtube algorithms sold me into drones was not a nice feeling. i'm too stupid and poor for this stuff

[2020-07-06 18:50:30] originaldobo007 : I think DJI created COVID.

[2020-07-06 18:54:11] originaldobo007 : It was intended to be released at the Autel offices around the corner but a disgruntled employee smashed the vial.

[2020-07-06 18:55:23] originaldobo007 : Too much was released too early. Frank Wang got **pissed**. He said, "fine. no more Mavic 3". And here we are.

[2020-07-07 19:37:05] tsun : is coldflake the only developer working on NLD?

[2020-07-09 15:48:06] rainer.kerncn : How deep? :-)

[2020-07-09 15:54:37] rainer.kerncn : @coldflake take it easy - health is most important and no release justifies to make compromises. I am waiting patiently for freeing M2 and haven't yet given up hope. Why we should be all patient? When we bought the birds we knew about DJI limitations, no surprise as at MP times when things came sudden. So we have to hope things can be fixed but it is not a given. Soon M3 will come but for sure given the increasing limitations I will not spend a dollar anymore. My M2 bird has been sitting way too long around pretty useless. Again, get well soon!!

[2020-07-09 16:19:39] dexlarpsn : "Soon M3" lol, M3 will come at earliest 2021. Might even be late 2021.

[2020-07-09 18:44:15] mel69hash : Thought there's rumours in printed article that its on 26 Sept and its hoping to be online launch.

[2020-07-09 18:44:43] mel69hash : Its going to be an online launch

[2020-07-09 18:49:05] dexlarpsn : That is confirmed fakenews

[2020-07-09 18:49:21] dexlarpsn : That was for another drone and was photoshopped

[2020-07-09 19:26:21] originaldobo007 : Yep. Unfortunately it was fake news.

[2020-07-10 22:22:36] nublish101 : Should intake note of my old serial number returning my drone on care refresh just before thebwareebtys up since it does have some sevear damage but for nld will you need to no my old serial number

[2020-07-10 23:26:55] dexlarpsn : Cornelius NLD is bound to your serial number, the day you get a new serial number (doesn't matter which way) you need to buy NLD again

[2020-07-11 11:55:48] chipmangini : @nublish101 I had a drone replaced by DJI, and NLD just transferred my old licence to the new drone...

[2020-07-11 11:56:34] nublish101 : Not so true John Athan I've been told. I can have it trabsfered

[2020-07-11 11:56:44] nublish101 : Hense asking if they need the old serial number as well

[2020-07-11 11:57:15] nublish101 : And cheers @chipmangini heh already new just wondered if they needed the old serial

[2020-07-11 11:58:47] nublish101 : Wondering what turn over times gunna be like with the rona and fact I gotta send it to the Netherlands from. UK which I'm. Pretty sure couriour services are okay between us but yeah hope it will be back before the good weather passes heh

[2020-07-11 11:59:04] chipmangini : I believe that your licence is tied to your email, but it was a while ago I did this...

[2020-07-11 11:59:46] dexlarpsn : The Netherlands is the EU DJI center, I am from Belgium myself, and I need to send it also to The Netherlands

[2020-07-11 11:59:53] dexlarpsn : Pretty dumb that UK needs to do that too

[2020-07-11 11:59:58] nublish101 : Yeah I realised I had 4 days before my care refresh ran out and I luckily got paid so yeah did it sharpish hoping to get it to ups on Monday

[2020-07-11 12:00:05] dexlarpsn : UK-NL is pretty fast these days

[2020-07-11 12:00:12] dexlarpsn : 1 to 2 days at max I guess

[2020-07-11 12:00:15] nublish101 : @chipmangini how did you pack your for the return

[2020-07-11 12:00:47] nublish101 : Was debating weather to put it in a big box load of packing balloons or smaller bex and not so much padding

[2020-07-11 12:00:51] dexlarpsn : I heard you can ship it without props, and they'll send you new props with the drone

[2020-07-11 12:00:53] dexlarpsn : Lol

[2020-07-11 12:01:10] nublish101 : Yeah it said no props or batterys

[2020-07-11 12:01:28] nublish101 : Hears hoping for new props

[2020-07-11 12:01:35] dexlarpsn : Yeah probably, never used care refresh and i don't have it (yet) :stuck_out_tongue:

[2020-07-11 12:01:51] dexlarpsn : Did you redeem care refresh on day one, or the process after 48h?

[2020-07-11 12:02:22] nublish101 : My MAS props have seen better days

[2020-07-11 12:02:45] nublish101 : Erm. I think indidnitnthebdsybafter ingot it in the post

[2020-07-11 12:03:15] nublish101 : But yeah I accidently sent er into a tree at 50mph haha

[2020-07-11 12:03:22] nublish101 : So hard the a tterybpopped out

[2020-07-11 12:04:07] nublish101 : And yeah still flys but In hot weather the camera gets really laggy and stutrery. Ot only on feed but recording to ad to

[2020-07-11 12:04:12] chipmangini : @nublish101 In the original box it came in...

[2020-07-11 12:04:17] nublish101 : So yeah think I k pocked a heat sink off

[2020-07-11 12:04:43] dexlarpsn : Damn, that sucks. At those issues I can assume you are glad you have Refresh haha

[2020-07-11 12:04:49] nublish101 : Wait the entire box but they said no batterys or props I don't even think they wanted the contoeller

[2020-07-11 12:04:57] dexlarpsn : I shipped stuff earlier for warranty, and I did in the original box too

[2020-07-11 12:05:17] nublish101 : Fair illmjustbdonthetbifni get a box back

[2020-07-11 12:05:18] dexlarpsn : I only did it because the original box was a good protection for the drone itself

[2020-07-11 12:05:26] nublish101 : Would be epic. If they just give me a fly more. Kit. Again

[2020-07-11 12:05:33] nublish101 : Extra batterys :p

[2020-07-11 12:05:52] nublish101 : My opinion the drone body is fucked beyond use

[2020-07-11 12:06:12] nublish101 : There like 6 different large cracks

[2020-07-13 08:25:30] ben_lin : now time for some obvious questions

[2020-07-13 08:26:00] ben_lin : my mavic2 is on 0300fw, upgraded from factory fw god knows how long ago...

[2020-07-13 08:26:49] ben_lin : and now, can I still downgrade it to 0100 with NLD, or is that option only available for those who upgraded fw with NLD, but not DJI officially?

[2020-07-13 08:27:01] ben_lin : @coldflake

[2020-07-13 08:27:05] ben_lin : thx

[2020-07-13 09:44:24] bin4ry : @ben_lin downgrade it to 100 if possible

[2020-07-13 09:44:38] bin4ry : just try

[2020-07-13 09:44:43] bin4ry : the firmware in NLD is also the DJI firmware

[2020-07-13 09:44:55] bin4ry : dji just swapped the firmware on their servers after a while

[2020-07-13 09:45:23] bin4ry : they updated the 300 and 400 firmwares after a few month to include the new antirollbackvalue. so if you are on 300 or 400 it is always worth a try to downgrade

[2020-07-13 09:45:43] bin4ry : or read out your antirollback and check yourself

[2020-07-13 09:55:10] ben_lin : Righto

[2020-07-13 09:55:16] ben_lin : I will give it a shot

[2020-07-13 09:55:34] ben_lin : I remember I updated before those shenanigans happened

[2020-07-13 14:28:57] mel69hash : I'm on .300 but cannot rollback. The owner who sold his drone to me must hv updated the latest .300 fw using Go4 app

[2020-07-14 05:57:03] yihuasteven : i was told that m2 motors would be locked after 7.27 unless upgrading to the latest 7.7 firmware.

[2020-07-14 08:48:05] ben_lin : DJI can suck my dick on that

[2020-07-14 08:48:17] ben_lin : GO App is already firewalled

[2020-07-14 12:15:24] dexlarpsn : That was for china if I am not mistaking Ivon

[2020-07-16 08:56:12] wj7106 : NLD 2.0？

[2020-07-16 10:00:22] dexlarpsn : Patience?

[2020-07-16 11:57:48] cantrepeat : Order 66

[2020-07-16 23:52:22] originaldobo007 : Forget NLD 2- they’ve skipped directly to NLD 5. Will be ready by the time the Mavic 8 is out.

[2020-07-17 07:22:52] heresmydron : php 4, php 5, php ~6~7

[2020-07-22 22:50:28] bobdole : :cricket:

[2020-07-24 00:23:32] ki4gyw : <https://www.synacktiv.com/en/publications/dji-android-go-4-application-security-analysis.html?fbclid=IwAR2PiEQbRyFNEVdz-LRS86J4UFw1DbJUXS0lRuvIfATONVZoLY7r3zr355k>

[2020-07-24 00:23:44] ki4gyw : Here is some real work going on! Looks like they tore apart the SecNeo also.

[2020-07-24 08:35:31] reaktor : There seems to be enough information in that article to completely unpack DJI Go4 SecNeo on Android. (It would have to be someone smarter than me however)

[2020-07-24 09:35:08] bin4ry : it is not. the info there is „known“ it gives you some classes but no proper dex file. hook into functions and dump them was done before, reconstruct all the stuff to get a proper apk is much more work

[2020-07-30 03:59:21] nublish101 : How long dose it normally take for a serial number switch

[2020-07-30 03:59:37] nublish101 : I'm expe ting my replacement drone sometime today :)

[2020-07-30 12:36:23] rickw001 : hope not as fast as updates,lol

[2020-07-31 14:06:29] bobdole : @coldflake i hope you're quiet because no news and not because coronavirus infection + stress turned you into roach food

[2020-08-01 16:52:18] nublish101 : He pmed me the other day when I was asking for a licence swap

[2020-08-01 16:52:48] nublish101 : Supposedly was gunna be a couple of hours 12 hours later I messaged him saying still waiting he said he'd look into it

[2020-08-01 16:53:08] nublish101 : It's been 2 days now still no word

[2020-08-01 17:39:05] david077 : @nublish101I pm'ed you about your license swap

[2020-08-01 18:06:50] fstephan1 : I afraid NLD is history.

[2020-08-01 20:24:53] 007 : Let's keep optimism about the Covid-19 and NLD

[2020-08-01 21:34:19] originaldobo007 : NLD is extinct. People may want to move over to dronehacks. They seem to be updating and adding features like crazy. NLD is done. I think 8 months since NLD2 was promised kind of tells you where things “really” stand.

[2020-08-02 00:36:56] rickw001 : I agree,past history

[2020-08-02 10:41:44] dexlarpsn : <https://www.youtube.com/watch?v=IPXIgEAGe4U>

[2020-08-02 10:41:48] dexlarpsn : Theme song for NLD

[2020-08-02 21:04:40] bobdole : not moving over to anything except for maybe Autel. unless dronehacks provides something as gamechanging as custom flight controller, i'm not paying anyone a dime.

[2020-08-02 21:36:46] originaldobo007 : Yep. It has a custom flight controller already.

[2020-08-02 21:39:03] originaldobo007 : It’s already way ahead of NLD just shortly after being released.

[2020-08-03 12:50:10] ls7454 : only if you have a mav2 but

[2020-08-03 13:11:27] bobdole : i meant to say custom flight controller for mavic 2 pro. in other words... something that isn't freely available

[2020-08-03 13:45:40] oakley75 : Honestly was quite surprised DH is charging $ for the MP1, when every single thing for it is available openly and freely. I get charging for private exploits though.

[2020-08-03 14:17:20] rickw001 : you don't have to buy,your choice

[2020-08-03 14:32:29] loaderbull : That’s the kind of comment i don’t get - as said, it’s a choice. If you want to use the paid version that is easy and fool proof, that is the way to go. If you want to try it yourself, for free, by other means, then again...do so. Being given an option doesn’t mean you must use it. It is exactly that - an option. A choice you make depending on your knowledge, capability and confidence. These apps take time to make and if the devs want to charge for that privilege then that is their choice :ok_hand:

[2020-08-03 16:04:12] bobdole : i wish we could have a hacked app instead of dji's

[2020-08-03 16:04:40] bobdole : even if i switch to autel, how closely has anyone been watching them? dji is more popular and under the microscope

[2020-08-03 16:05:13] bin4ry : i charge a service fee for the users which cannot do it on their own. AND did you see any public exploit allowing you to install a customFC on the latest firmware for mp1, p4pv2 and soon spark?

[2020-08-03 16:12:23] digdat0 : Binary is spot on there. Its about convenience. People will pay to press buttons and not have to learn. Not everyone wants to learn details to do accomplish goals.

[2020-08-03 16:12:43] bin4ry : thanks :wink:

[2020-08-03 16:13:34] bobdole : you can't charge enough imo.. how long until these trolls are whining at you for an update?

[2020-08-03 18:05:11] oakley75 : I didn't mean to come across so negative. I have the absolute most respect for you @bin4ry for what you are doing and how responsive you are. I will be purchasing several licenses myself. And I don't know why, but I didn't expect the mp1 to cost, but certainly I get it (esp with the custom fc you mentioned which I wasn't thinking about at the time). I am man enough to say I was wrong. Respect to all the og's. Peace.

[2020-08-03 18:31:07] bin4ry : thanks! no offense taken, you got a valid question and you got answers :) a good dialogue is very important :)

[2020-08-05 17:46:49] originaldobo007 : Just gonna put this out there:

[2020-08-05 17:46:59] originaldobo007 :

[2020-08-05 17:47:41] originaldobo007 : Where's that NLD2? Is coldflake still suffering from the coronavirus? :rolling_on_the_floor_laughing:

[2020-08-06 12:45:36] originaldobo007 : I think he was highly infected with this virus.

[2020-08-06 15:08:51] fstephan1 : Corona beer same problem as NLD -> <https://edition.cnn.com/2020/04/03/business/corona-beer-production/index.html>

[2020-08-06 15:42:03] bobdole : i can drink like 1/4 of any random IPA to simulate the buzz i get from a 6 pack of corona

[2020-08-06 15:42:12] bobdole : but then the corona gives me a headache

[2020-08-06 15:42:48] bobdole : regardless... it was there for me when the toilet paper wasn't

[2020-08-09 05:20:01] rickysuper : Too sad that NLD2 was stopped production.........

[2020-08-10 22:30:42] cantrepeat : Still being a total douche bag I see. @originaldobo007

[2020-08-10 22:31:24] originaldobo007 : Dude- I didn’t say anything factually incorrect. Stop being so butthurt.

[2020-08-10 22:32:39] originaldobo007 : And I wasn’t the first person to post above the “Corona” problem that NLD is having which delayed NLD2 for 9 months and counting.

[2020-08-10 22:34:02] originaldobo007 : But thanks for your “input” @catalinaskirace :+1::skin-tone-3: :grinning:

[2020-08-10 22:39:37] dkovar : Enough. Stop with the justification, stop with the bad behavior. You are just trolling.

[2020-08-10 22:43:58] originaldobo007 : I’m not trolling. Please read above. I wasn’t the one who initially posted the fact that NLD and corona beer have the same problem.

[2020-08-10 22:44:11] originaldobo007 : You need to stop your bad behavior.

[2020-08-10 22:44:30] dkovar : Bye bye

[2020-08-11 22:06:08] originaldobo007 :

[2020-08-15 23:03:10] dexlarpsn : @coldflake Just a general question, but is there any update on the 2.0 update?

[2020-08-16 09:01:39] fstephan1 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 2.0.0.0

[2020-08-16 09:02:33] fstephan1 : set the channel topic: **NLD:** Up | **Support:** Up | **Latest Version:** 1.9.3.7

[2020-08-16 17:57:03] dexlarpsn : set the channel topic: NLD IS DEAD

[2020-08-16 17:57:17] dexlarpsn : Lmao, how are we susposed to do this

[2020-08-16 17:57:28] dexlarpsn : Should be something limited to admins or smth

[2020-08-16 18:21:11] dkovar : Why don't you just not do this?

[2020-08-16 18:21:27] dkovar : cleared channel description

[2020-08-16 18:43:50] originaldobo007 :

[2020-08-16 18:59:28] nublish101 : techbnically it shoudltn be possiuble unless its a channel admin or moderator btu ti seem yliek thta s borked

[2020-08-16 19:01:19] dkovar : Keep that up and you'll be kicked again.

[2020-08-16 19:15:50] bobdole : its not cleared

[2020-08-16 19:16:00] bobdole : cleared channel topic

[2020-08-16 20:15:19] originaldobo007 : Since @dkovar - you are a “business” partner of NLD- do you have insight into all the new features that are in NLD 2? Of course it has custom firmware, right?

[2020-08-16 20:20:52] dkovar : It is not my place to comment on their business.

[2020-08-16 20:21:50] 007 :

[2020-08-16 20:22:02] originaldobo007 : Oh- gotcha. It appears that it has no new features.

[2020-08-16 20:22:25] originaldobo007 : A re-skin of superpatcher? Bird map and capabilities are absolutely identical to what it was before. Is this what is meant by “game changer”?

[2020-08-16 20:22:32] originaldobo007 : No custom fc.

[2020-08-16 20:22:56] originaldobo007 : 1.9 magically became 2.0 with no fanfare and the same software. So glad it required so many months of testing.

[2020-08-16 20:25:23] originaldobo007 :

[2020-08-16 20:56:21] dexlarpsn : :clown_face:

[2020-08-16 20:56:28] dexlarpsn : Just this emoji :clown_face:

[2020-08-16 20:57:12] dexlarpsn : C'mon man @originaldobo007 Don't hate, that toke 8 months to edit the text in photoshop. Have some respect for that masterpiece :clown_face:

[2020-08-16 21:00:35] rickw001 : mine won't even update,says error,lol

[2020-08-16 21:03:14] dexlarpsn : Maybe 2.0 is really coming :open_mouth:

[2020-08-16 21:03:33] dexlarpsn : The website is updated too though

[2020-08-16 21:03:40] dexlarpsn : Last time I checked it wasn't

[2020-08-16 21:34:07] originaldobo007 : Here is the change log:

[2020-08-16 23:28:30] dexlarpsn : Is there actually anything updated? I think the dronemap is updated but I am not sure.. Didnt check that for a long time

[2020-08-16 23:36:14] originaldobo007 : I haven't been able to find anything different so far. Anyone else?

[2020-08-16 23:39:03] dexlarpsn : As far as the birdmap goes dronehacks does things better... :woman-shrugging: Maybe we should just wait on the change log, maybe we are missing some things.

[2020-08-16 23:39:29] dexlarpsn : We'll get the changelog in 3 months starting today I am sure of

[2020-08-16 23:56:43] originaldobo007 : It doesn't appear we are missing anything. This is simply a skin added onto the good' ol' Superpatcher. Nothing new here - no new features that would make this a "2.0" release it appears.

[2020-08-16 23:57:15] originaldobo007 : They don't even seem to offer a custom FC for the P4P2 which drone hacks already does.

[2020-08-17 00:05:17] fredmicrowave : Is that so easy to throw stones at someone laying on the ground ?

[2020-08-17 06:25:31] coldflake : @originaldobo007 Then look again lol

[2020-08-17 06:28:17] coldflake : @originaldobo007 Custom Flight controller for all firmwares on all birds should do it I would say. NLD is the only one who cared to make custom FC for all firmwares. They are being put online the coming days. @originaldobo007 What is it that you feel drone hacks does better than nld?

[2020-08-17 06:31:44] coldflake : @originaldobo007 We have custom FC for ALL P4Pv2 firmwares, we just forgot to publish them along with the release lol

[2020-08-17 06:58:22] dexlarpsn : @coldflake Is there anything new for M2 or does that still need to be updated? As far as I can see FCC/boost is possible now, and nothing else right?

[2020-08-17 06:59:47] coldflake : @dexlarpsn The only thing that you can not do is to remove nfz, the rest is possible

[2020-08-17 07:00:21] dexlarpsn : Height removal too? @coldflake

[2020-08-17 07:00:53] coldflake : Ah yeah, not that either, correct

[2020-08-17 07:21:55] bobdole : @originaldobo007 is butthurt @coldflake. just give him space and when he is ready to make peace with himself he'll be less spiteful

[2020-08-17 09:18:15] ben_lin : is it possible to bring newer firmware features for M2 down to older firmwares?

[2020-08-17 09:18:25] ben_lin : or is that impossible

[2020-08-17 09:24:51] coldflake : We have an option which seems to be fruity ;)

[2020-08-17 10:04:06] pingspike : @coldflake don't forget to update <https://nolimitdronez.com/news> and/or <https://nolimitdronez.com/blog>

[2020-08-17 10:26:42] coldflake : @rich Yes, all that will be done a little later today. Up to the release, we worked 3 days non stop. We are currently totally done and dusted lol

[2020-08-17 10:26:58] pingspike : :+1::skin-tone-2:

[2020-08-17 13:33:46] bobdole : is V 3.0 out yet?

[2020-08-17 13:33:54] bobdole : let me know so i can bitch about what isn't on v3

[2020-08-17 14:07:07] digdat0 : I like the updated UI on NLD. I Havent played much, but its clean. Nicely done ui coldflake

[2020-08-17 14:12:15] wj7106 : NLD v2.0 cannot remove from 510 firmware NFZ??

[2020-08-17 16:24:02] coldflake : @digdat0 Glad that you like the new UI. It's built on the fly depending on the device that is connected

[2020-08-17 16:53:36] flymymavic : the new layout sucks for the MP1 i prefer the original version with the tabs, also i get this error when applying FCC with or without boost

[2020-08-17 16:53:49] flymymavic :

[2020-08-17 17:16:38] flymymavic : Also I cant get any FW to download ?

[2020-08-17 17:50:46] flymymavic : what is the yaw speed setting all about ? having trouble finding any info on it

[2020-08-17 18:20:06] 007 : Hi What is the different between the 01.05.0600 to the 02.00.0700 firmware on p4p ? Thanks

[2020-08-17 18:31:26] flymymavic : im not alone with issues, there are a couple of posts about FCC not working and not downloading FW in the forums

[2020-08-17 22:51:27] bobdole : is this custom flight controller in that on a mavic 2 pro you can have NFZ removed and still have precision landing?

[2020-08-18 07:44:50] dexlarpsn : @jacksphone M2 has no custom FC

[2020-08-18 23:45:54] ls7454 : the difference is 2.00.0700 is for P4 not P4P. Dronehack had the same issue when first released. Is a cockup.

[2020-08-19 01:31:58] samdi : Can you patch with NLD2.0 REMOVE NFZ? Why I clicked it without any response, no new interface appeared, other FCC and modified parameters can pop up the new interface normally.

[2020-08-19 01:33:59] samdi : @coldflake Has the M2 fw0100 test patch nfz passed?

[2020-08-19 09:12:45] coldflake : @chenx20160520 There is a stupid bug that sneaked in just before the release. We will release an update in a couple of days when we have collected some more feed back

[2020-08-19 09:12:52] coldflake : So far only 2 bugs has been discovered

[2020-08-19 09:15:06] coldflake : @flymymavic Can you please open a support ticket so that I can have a look at it. Remeber to put in your licence key so that we can find you in the log

[2020-08-19 09:17:16] ls7454 : <http://nolimitdronez.support/>

[2020-08-19 09:18:19] ls7454 : ??

[2020-08-19 11:13:54] fredmicrowave : There are 2 "contact us" , I think <https://nolimitdronez.com/contact-us> should be labelled "support" @coldflake

[2020-08-19 11:58:00] coldflake : @ls7454 Thanks for the info. It's [https://support.nolimitdronez.com](https://support.nolimitdronez.com) I forgot to put up the redirector from http to https.

[2020-08-20 07:23:09] 007 : Thanks

[2020-08-20 12:00:57] fstephan1 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.0.0

[2020-08-21 21:21:56] 007 :

[2020-08-21 22:08:15] dexlarpsn : <https://nolimitdronez.com/nld-mod-client-2001> @shacharmilo

[2020-08-22 07:40:30] fstephan1 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.0.1

[2020-08-22 11:04:21] flymymavic : Have they fixed the bugs then ?

[2020-08-22 13:15:00] 007 :

[2020-08-22 13:16:41] 007 : Mavic pro failed to upgrade nfz & alt

[2020-08-22 13:17:48] 007 : Firmware 01.04.500

[2020-08-22 13:20:05] 007 : It up until 75% and then get the message failed

[2020-08-22 15:48:02] originaldobo007 : Must be a “feature” because NLD 2 was called a “game changer”.

[2020-08-22 16:49:33] digdat0 : Anyone else have issues after loading a nld custom fw? My mavic pro was on 1.04.400 and installed nld custom fc and after im in a boot loop.

[2020-08-22 17:15:25] fredmicrowave : I have been experimenting with NLD and Mavic Pro on Win7. Everything worked fine ( but not smoothly, had to restart AC, PC and USB) except for custom FC, that gave " Fail to enter recoverry mode" or something like that . Tried on 2 PC´s. I then installed Win10 on the other PC, and everything worked perfectly at first.

[2020-08-22 17:15:56] fredmicrowave : So if you have errors on win7, try win10...

[2020-08-22 21:09:32] dkovar : @originaldobo007 Enough. You do that again, you're kicked again.

[2020-08-22 22:01:05] dexlarpsn : @dkovar Is there any point for kicking people and when they can just join again? Lol, I mean don't get me wrong too but you know that the whole NLD story doesn't mean we/or the person hates NLD, but it's just a meme. It will stay a meme most likely, and as long as coldflake didn't show that he hates this kind of reactions there seems to be nothing wrong I guess

[2020-08-22 22:03:07] dkovar : Yes, there is a point. Harassment is not tolerated. It isn’t just a meme. He’s been harassing NLD for months. We should not allow an environment where people need to feel like they must complain to get fair treatment.

[2020-08-22 22:04:52] dexlarpsn : I get that, but he got kicked before and he just joins again. You can tell him that he will be kicked again, but if he can just join again that's basically just.. useless.

[2020-08-22 22:06:18] dkovar : Yep. Just kicked him again and he’ll join again. It takes him out of sight for a few days.

[2020-08-22 22:06:53] dkovar : If he gets worse, I’ll just kick him when he joins. As long as he is polite, he doesn’t get kicked. Pretty simple.

[2020-08-22 23:22:40] chipmangini : DickHead....

[2020-08-23 07:21:01] coldflake : @dkovar I fully agree with you and to be very honest, one of the reasons that I am not much active in slack any more is exactly because of people like @StanLee. Its so damn easy to criticize and to be honest, I will refund his license even though he used it a lot and perm ban him from NLD.

[2020-08-23 07:36:37] d95gas : :+1:

[2020-08-23 14:12:09] bobdole : <https://pbs.twimg.com/media/DjYx6a5XcAAOZKz.jpg>

[2020-08-24 17:09:09] dexlarpsn : @coldflake Found any spare time to post that thing onto NLD?

[2020-08-24 17:09:18] dexlarpsn : NLD's website*

[2020-08-24 18:53:54] coldflake : It's coming early tomorrow morning, had to clear some legal stuff out first :)

[2020-08-24 20:15:26] dexlarpsn : Alright, no worries. Was just informing, kinda excited what it's gonna be about :stuck_out_tongue:

[2020-08-25 05:11:09] ls7454 : Can confirm NLD 2 Boost & FCC working well on the I2. :+1:

[2020-08-25 11:27:17] coldflake : It should for sure and if not we know what to change so it does

[2020-08-25 11:59:10] dexlarpsn : @coldflake Since you teased NFZ removal for M2 couple of days ago, is there any chance height removal will work too?

[2020-08-25 14:42:50] coldflake : @ls7454 Could you please post a picture of the signal graph for others to see and understand how it looks when enabled?

[2020-08-26 02:54:00] ls7454 :

[2020-08-28 02:27:08] 503496897 : The New nld does not work on m2. After remove nfz. It shows fw dismatch

[2020-08-28 02:28:15] 503496897 : Any else？

[2020-08-28 17:23:32] coldflake : M2 zoom on fw 100?

[2020-08-28 17:23:57] coldflake : Never heard of that issue before

[2020-08-28 17:24:27] coldflake : Try reflash 100 with nld and then rerun the nfz patch

[2020-08-29 12:49:14] 007 : What is the new updating 2.0.0.2 ?

[2020-08-29 13:42:33] fstephan1 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.0.2

[2020-08-29 13:43:11] fstephan1 : -> <https://nolimitdronez.com/news>

[2020-08-30 15:33:29] rickysuper : With our NLD M2 Core Board root is permanent and will allow for using our mods on ALL firmware from the latest to the ones to come in the future. That means we have to buy the Core Board if we want to do ALL mods on M2 latest firmware ?

[2020-08-31 01:12:58] originaldobo007 : What’s the difference with this? It seems cheaper: [http://www.coptersafe.com/product/nfz-mod-for-mavic-2-pro-zoom/](http://www.coptersafe.com/product/nfz-mod-for-mavic-2-pro-zoom/)

[2020-08-31 07:25:01] coldflake : The difference is that they ruin your stock board and voids the warranty. You can not send it back to dji after that. That's why we do the whole core board so you can always replace it with your stock one if you crash your bird ;)

[2020-08-31 07:25:37] coldflake : And... You don't have to send the bird to us for fitting, you just order the board and have in your mailbox 3 days later

[2020-08-31 07:26:43] coldflake : So you see, even though it's a little cheaper it's really not a good solution at all due to what I mentioned above

[2020-08-31 09:36:28] cantrepeat : Damn, I was hoping it was a perma ban.

[2020-08-31 12:54:36] dkovar : Don’t start this up again. Everyone should be polite.

[2020-08-31 17:12:37] bobdole : its not cheaper. you end up with 2 boards using NLD

[2020-08-31 17:13:02] bobdole : fixacrash sells core boards for $395

[2020-08-31 17:13:42] bobdole : @originaldobo007 you're an idiot

[2020-08-31 21:56:10] dexlarpsn : @jacksphone He has a point. The fact that @coldflake says it's not gonna void your warranty is totally wrong, the moment you open up your drone and replace a single thing, your warranty is void because you've opened it up yourself and you didn't do it with a authorized DJI service center, makes sense right? It's not about what you put in your drone, or how you modify it. It's about that you open it up, and try to fix it by yourself. Even if you use official parts, your warranty is still void. Imagine replacing a battery in your iPhone, and after that going to Apple because it doesn't charge? As much I agree to Coldflake in general, this is just straight up sales talk.

[2020-08-31 22:16:46] bobdole : @dexlarpsn you're wrong. they have to prove your actions voided the warranty. i've sent in more broken drones than i want to admit with increasingly more obvious modifications and they have honored dji care as well as warranty.

[2020-08-31 23:45:04] dexlarpsn : Then they simply say you've opened up the drone and that you didn't have the expertise for it, which is why it broke :joy:, and also.. The warranty will still apply then for the mod mentioned above. So you are denying Coldflakes warranty story too. Great we are on the same level! As you said: Ive sent in drones with obvious mods and they honored warranty. So they still will with a modded bord right? Nontheless, sorry to say, its sales talk without any logics behind it. Why is the competitor worse? It has no warranty, while in the end you dont have warranty by DJI, either with the NLD board or the other. All depends on luck..

[2020-09-01 01:00:05] originaldobo007 : It is pretty clear that someone replacing a board with a "modded" core board, rebinding the camera and gimbal to new hardware, etc would void the warranty. The fact that you can point to some anecdotal examples of some birds whose warranty was voided which slide through their repair service chain does not mean that this doesn't violate the warranty. In fact, DJI openly will admit that a problem using Litchi, with DJI's own SDK will give them a reason not to honor a warranty. **Saying that putting in this "new" board won't void the warranty is complete and utter bullshite and quite easily verified. @jacksphone** DJI doesn't have to prove jack shit. They can say "you opened it up and put a different part in here." Good luck with telling them that they can't "prove" you voided the warranty. Best of luck with that, Champ! :face_with_rolling_eyes: It is unethical and disingenuous to state that it doesn't void the warranty - and anyone who would make such a blatantly false claim should be treated with skepticism. And lastly, there is no altitude restriction removal associated with a board without a valid cert from DJI. And likely no NFZ removal either. This picture doesn’t add up because he also doesn't have a cracked binary of any kind for the M2 on later firmwares. I suspect that people will get quite angry upon realizing that this won't deliver what people think it will.

[2020-09-01 01:16:03] originaldobo007 :

[2020-09-01 02:53:32] bobdole : let me know if you want me to rephrase that into a ginormous wall of text that nobody will read

[2020-09-01 03:14:59] ben_lin : they CAN void it if you opened it up yourself

[2020-09-01 03:15:10] ben_lin : I personally haven't had that happen on me

[2020-09-01 03:15:42] ben_lin : I bricked my P4P smart controller once by doing the root wrong and they even replaced that

[2020-09-01 06:27:27] reaktor : What are the Limitations in the product description?

[2020-09-01 06:59:01] coldflake : There are no seals that breaks when you open the bird. Unless you are a complete idiot there are no traces at all. Did it many times and dji replaced it when I bricked it finding new mods. Dji rarely even look at the bird, they just replace it. If you tell them that Hey I opend my bird and crashed it in a tree, yes they will tell you that warranty is void. Otherwise not :)

[2020-09-01 07:00:39] coldflake : @dexlarpsn In all respects, I were among those who started all this and during the last 3 years, I have never ever heard of anyone who had their warranty void after opening their bird. Stating that it is not common is lack of knowledge how dji operates.

[2020-09-01 07:01:32] coldflake : In any case it's a free world, but if you use coptersafe then you definitely voids the warranty as they replace 2 chips on the stock board and then it's....stuck :)

[2020-09-01 07:03:37] ben_lin : They kinda just void ya warranty if thing crashes into tree

[2020-09-01 07:03:52] ben_lin : even if it were the bird's fault

[2020-09-01 07:04:09] ben_lin : but that's from the P3 times...

[2020-09-01 09:38:12] bin4ry : as i heard they just solder to the board and flash this way an old firmware to the board. no direct chip replacement but still soldering.

[2020-09-01 15:28:31] coldflake : They claim it works on 510 so I would expect they would replace a chip then? What do you think mate?

[2020-09-01 15:30:44] bin4ry : nah as far as i heard it it is a downgrade method which works on 510. downgrade through soldering on the board

[2020-09-01 15:31:54] coldflake : Oh that is whack lol

[2020-09-01 15:33:06] coldflake : @ben_lin yes ok, crashing into a tree lol but dji care would still pick it up

[2020-09-01 16:07:40] coldflake : @jacksphone That wouldn't surprise me, I bought some carbon ones for my P3 and that resulted in a really funky crash.

[2020-09-01 16:13:27] ben_lin : theres a good reason for that, seeing how some of those 3rd party props break...

[2020-09-01 16:49:59] coldflake : Yes true

[2020-09-02 00:55:39] mel69hash : I've managed to get a replacement to my MP even without sending my crashed MP which cannot be retrieved as its in a reservoir within NFZ due to battery failure. The battery screen record showed it dipped from 30% to 5% in a matter of 5 second. DJI honoured it under battery warranty although my MP was modded as hell. This I can say DJI customer care is good and its not even under Care Refresh as they don't provide here in Singapore

[2020-09-03 08:00:16] coldflake : Yes a lot of things can be said about dji but their customer care is outstanding. They never rejected anything we sent in. Even bricked birds which were fully obvious that they bricked because we tried to hack them. For dji it cost them less money in the western world just to replace the whole bird rather than paying technicians by the hour to find and repair the problem. The replaced birds to back to the factory, get stripped down and the hardware goes back into the production line following the same automated tests as everything else.

[2020-09-04 07:38:46] ben_lin : hows that software coming along ay?

[2020-09-04 07:38:51] ben_lin : excited about it

[2020-09-08 17:58:54] hazardc : So what's the deal with this p4p mod that your forums say isn't working? You guys are claming custom FC and boost mode, i have a copy of NLD waiting to be used and was going to put it on my p4p... not so sure after reading your forums and lack of responses or updates to birdmap. looks like a one way ticket to bricks-ville?!?! wtf?

[2020-09-09 18:42:44] david077 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.0.4

[2020-09-10 10:05:08] david077 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.0.5

[2020-09-10 11:15:34] pingspike : oh? what's new?

[2020-09-10 11:50:50] david077 : Custom Flight Controller Hot Fix

[2020-09-10 14:35:13] digdat0 : Is that latest fc fix gonna resolve the bricking? I havent used nld since that happened on my mpp, little gunshy.

[2020-09-12 12:00:14] coldflake : @digdat0 What you mean with bricking? NLD can not brick the bird?

[2020-09-12 12:01:02] coldflake : Djis flawed flashing routine is what bricks the bird once in a while but it is nld or the mods that bricks

[2020-09-12 12:01:18] coldflake : It could happen with assistant as well which it does quite frequently

[2020-09-12 12:01:37] coldflake : We usw the exact same way to Flash Firmware as dji

[2020-09-12 12:02:08] coldflake : When the bird is flashing it sends out a duml message with the current progress every 500ms

[2020-09-12 12:02:24] coldflake : If nld receives that duml it shows the progress dialog

[2020-09-12 12:03:04] coldflake : As soon as it stops sending out the duml the dialog disappear unless the flashing completed at 100%

[2020-09-12 12:03:31] coldflake : I did this to be able to identify what is going on with those faulty flashes

[2020-09-12 12:04:01] coldflake : In every case which is not many we have heard of so far, the progress dialog is shown continously

[2020-09-12 12:04:29] coldflake : That means that the bird is still flashing but somehow got stuck due to djis faulty flashing process

[2020-09-12 15:59:07] digdat0 : @coldflake i ran nld 2.0 custom fc on mpp 1.04.0400. after install it doesnt connect to rc and usb reconnection happens when plugged in. The update suceeded, just didnt work properly and left my ac in that state. It may be dji’s technology, but NLD is the software to initiate it and is ultimately responsible for the cause. Ive flashed hundreds of peoples aircraft and my own about the same, the only thing to ever leave my ac like this was a bad install of one of the early t&f rooting methods.

[2020-09-12 16:25:13] coldflake : @digdat0 What firmware were you on when applying CFC?

[2020-09-12 16:25:33] coldflake : I know how to fix it and I can send you a bin file that correct the problem

[2020-09-12 16:26:00] coldflake : Is still on the same firmware?

[2020-09-12 19:29:40] dexlarpsn : @coldflake When are you going to be honest to customers? Every single modding tool (DH, SP, NLD) can brick your drone. Either by a fault from the coder of the tool, either from the bird person's fault itself. But going in to fully defend modus that its DJI's fault is not true at all. There are a lot of causes, and yes NLD can be one of them, and yes DJI can be one of them but it's not the only one. Dont be ashamed to sometimes look into problems, and admit if you or your software had a human fault in it. NLD still modifies/adds files to it. So if that files/modifications have errors in them, it makes sense the FW is corrupt. And thats out of DJI's hands, but it is, in your hands.

[2020-09-12 20:29:51] coldflake : @dexlarpsn It is not about not being honest, it's about having insight in how stuff works. When we mod files on the drone itself it can not cause a brick, period. Most of the times when something goes brick its because djis shit is faulty. In @digdat0 s case I think it is because Brett's patcher has been used previously and that CAN cause a mixup. Saying that it's NLDs fault is not fair and when we say NLD, DH or what not can not brick the bird it is because we use djis own methods for flashing. I don't know what is the case in @digdat0 problem but I at least know how to help him out of it

[2020-09-12 20:30:34] coldflake :

[2020-09-12 20:33:32] coldflake : @dexlarpsn It IS djis fault eventually when it bricks during flashing no matter how you put it. Their poorly written code doesn't make the checks they should not handle expectations as they should. You can look into their code and the duml protocol and then tell me again if you still believe it's not their fault in the end. The only way the bird can be bricked is by using the flashing process and Not just by replacing or nodding some files.

[2020-09-12 20:34:54] coldflake : I know what your point of view is but it not valid when dji doesn't do proper exception handling and automatic rebuild of the OS.

[2020-09-12 20:37:02] coldflake : In case you do not know, dji made it so that if a flash was faulty, the bird will rebuild itself. That usually works but guess what, they also did a horrible coding job there and that is basically why you end up with a brick from a botched flash. They fucked it up also in their recovery method. So think about that for a short while...if they made their recovery method properly and stable there would be no bricks at all.

[2020-09-13 06:26:16] elvin.yx : I was expecting the board to give permanent NFZ/altitude removal on any firmware...:joy: After reading the core board page on NLD I was so excited that I almost placed order. Then I was thinking to check here on slack before I do, and realized that was not something as I understood. Please maybe add more description on the page to let normal users know what the board is capable of. Following descriptions are really misleading for unprofessional personnel: ```With our NLD M2 Core Board root is permanent and will allow for using our mods on ALL firmware from the latest to the ones to come in the future. In other words, if you are tired of being stuck, hurry up and order one! With our M2 NLD Core Board your bird will be forever free!```

[2020-09-13 07:06:25] 503496897 : fcc does not work. App is struck in deploying payload

[2020-09-13 09:35:07] dexlarpsn : @503496897 That's DJI fault mate, nothing NLD can do lolololol

[2020-09-13 12:56:03] coldflake : @503496897 Just try again, it works now, we had a problem with ADB

[2020-09-13 12:57:00] coldflake : @dexlarpsn One more time and you will get the ban hammer from dji reverse engineering on slack

[2020-09-13 12:57:40] 503496897 :

[2020-09-13 12:57:50] 503496897 : @coldflake

[2020-09-13 12:58:14] 503496897 : What the hell

[2020-09-13 12:58:33] coldflake : @m did you apply it already previously?

[2020-09-13 12:59:16] dexlarpsn : I simply said to him what you said to me. Sorry if that was false information :wink: take care lmao

[2020-09-13 13:00:21] coldflake : @dexlarpsn no you didn't, taunting is a violation of the policies

[2020-09-13 13:02:06] coldflake : @503496897 I found you in the system log, I will look into it and recreate the problem and push an update

[2020-09-13 13:03:31] coldflake : @503496897 Have you applied the nfz patch before on that firmware?

[2020-09-13 15:17:24] coldflake : Everyone who had this remove nfz problem on M2, please try again. I just pushed an update that fixes the problem :)

[2020-09-13 15:37:07] david077 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.0.8

[2020-09-13 19:53:02] originaldobo007 : @digdat0 is your bird still bricked after running NLD 2?

[2020-09-14 04:56:34] coldflake : @originaldobo007 A bricked bird is when it will not come up with the com interface and the communication is impossible. His bird wad not bricked and a few firmware flashes fixed it. It also worked fine after applying the CFC but after the 2nd reboot it went weird. What people don't know is that some files persists after firmware flashing and I think that it somehow messed up with custom FC and the so called super patcher.

[2020-09-14 04:57:08] coldflake : Ie that super patcher has been run on that bird at some point or that he manually applied a custom FC

[2020-09-14 04:57:28] coldflake : That leaves some files behind in some cases depending on what firmware one is flashing to and from

[2020-09-14 04:59:46] coldflake : The SP does not distribute 305 which is a big problem depending on the combination of firmware to and from

[2020-09-14 05:00:40] coldflake : If 305 is not distributed one can end in the situation that the bird rejects 306 which is the custom FC boot loader

[2020-09-14 05:01:10] coldflake : That obviously put the bird into a continuous boot loop but that can easily be fixed

[2020-09-14 05:01:48] coldflake : NLD does distribute 305 along with 306 so this issue can not occur

[2020-09-14 05:02:38] coldflake : Since Brett was only copying other people's work he didn't know what he was doing and in some way left a ticking bomb for everyone to use on github

[2020-09-14 05:03:07] coldflake : Most of those people who had issues with our CFC has all been using this bloody SP

[2020-09-14 05:09:27] coldflake : Personally I find it very frustrating being judged by people who have no clue of how all this stuff works. Its so easy to sit and slam people wirhout knowing anything. When we started this slack workspace it was all contributers who were in here and people who had an interest in finding exploits. Now it's overrun by wankers and gimme gimme idiots. So great job everyone in killing the scene and stopping the real. OGs from giving a shit

[2020-09-14 06:06:28] ben_lin : yo whats new in 2.0.0.8?

[2020-09-14 11:17:41] dnapappas0112 : You all need to stop coming in here and talking shit when you don't know what you are talking about. coldflake IS being honest with you guys. He has no problem explaining to you what is going on so just listen instead of talking shit. If you knew anything about what NLD is doiing, you wouldn't be here, you would understand how things work. DJI's own assistant 2 can brick a bird, it has nothing to do with NLD's software, it's the way DJI does things that screws shit up.

[2020-09-14 11:19:53] dnapappas0112 : And, you were all invited to join this workspace so you could see how things get done, not so you could cry about your own mistakes. If you want something for free, then expect to get "free". Anyone that has paid for NLD has unlimited support and help, does your free super patcher give you that? Leave the guy alone and let him do what he does.

[2020-09-14 13:14:10] reaktor : Superpatcher completely fucked my P4P. His dodgy GPS mods caused a flyaway on the first flight.

[2020-09-14 13:15:15] reaktor : Stick with NLD and programmers that have a clue, then you won't be out $2500

[2020-09-14 13:49:32] d95gas : @coldflake Any recommendations to rectifying a device that has had SP on it prior to doing anything further with NLD ?

[2020-09-14 13:49:36] dexlarpsn : Coldflake is honest, yes yes you are right Dave. Did you know, the earth is flat?

[2020-09-14 15:33:14] digdat0 : my bird is fixed, and I want to say that coldflake reached out to me 1:1 and has been super awesome in supporting what i shared, learning and helping me resolve any issues. I think something we need to remember is, this is a community, and we need to support each other. Software is hard to make and sometimes has issues, we can't turn on each other. DJI is the enemy, not folk on this forum. @coldflake sorry for the delay in getting back, some heavy personal shit going on. Very much thank you for reaching out to understand and help with any issues.

[2020-09-14 16:08:46] bobdole : i'd imagine if you flash a complete firmware on it to wipe it clean, NLD should work fine right? its basically like an android phone.. you can't go mixing roms

[2020-09-14 16:09:41] bobdole : ppl like stanlee are cancer for this stuff.. they must be trolls hired by dji or [insert major cellphone maker]

[2020-09-14 18:15:53] digdat0 : Oh, to be clear i did not mix roms. This was a rooted 1.03.0700 board updated to 1.04.0400 and then flashed with nld cfc. it was a backup core board i had my nld license tied to which I put back in, so that possibly had something to do with it, but it had no cfc on it. I let the battery die, then flashed twice with stock and it came back. while im not gonna get in the middle of any spats, I have always had good interactions with stanlee, he's opinionated which i can respect. I think we as a community should continue to drive "community" and work together, not against.

[2020-09-14 18:16:34] digdat0 : someone shared a good trick of using the fridge to let the battery die :smile: <https://i.imgur.com/U2yCnzn.jpg>

[2020-09-14 19:38:06] bobdole : I see you’re drinking 2%. Is that ’cause you think you’re fat? ‘Cause you’re not. You could totally be drinking whole if you wanted to.

[2020-09-14 20:11:23] markusfriedl : @coldflake How to fix such a bootloop?

[2020-09-14 20:18:38] bin4ry : that was me :sweat_smile:

[2020-09-14 21:25:43] digdat0 : lmfao. I can't drink milk, its not pretty, trust me! 2% is what the munchkins prefer.

[2020-09-15 05:25:31] bobdole : oh.. that was a napolean dynamite reference

[2020-09-15 09:05:12] coldflake : Regarding the question a guy had here about how to get out of a boot loop, it depends on what causes the boot loop. Boot loops are not so bad, they can be fixed. The only problem that is hard to fix is if it refuses to open the com interface making communication impossible from the PC. If that happens, then it is what we call a brick.

[2020-09-15 09:06:42] coldflake : That is what I tried to explain the other day, that NLD or DH can not brick a bird unless the firmware flashing is either interrupted by the user OR it gets stuck due to some mishaps dji made in their flashing procedure.

[2020-09-15 09:08:12] coldflake : Regarding the boot loop, I don't know if it wad a general question or a specific problem the guy had. If it's the latter then some more info is required, if it was a general question then it's not possible to answer in general as it depends on what happend with da bird lol

[2020-09-15 09:20:43] ben_lin : could verywell be that he forgot to close the microwave door while making popcorn when the bird is flashing and the escaped waves flipped some bits in the chip

[2020-09-15 09:20:46] ben_lin : LOL

[2020-09-15 09:50:18] fstephan1 : @ben_lin microwaves can not powered on with open doors.... with open door , microwave would cook your own meat.

[2020-09-15 12:33:20] ben_lin : Did anyone receive a NLD M2 coreboard?

[2020-09-15 12:33:36] ben_lin : If so, how hard was it to swap?

[2020-09-15 13:15:29] nocommie : I have swapped core boards in the Mavic Pro and have disassembled my M2P pretty far and it isn't hard as long as you have good solder skills. A big help is to follow a teardown video step by step and most importantly keep all screws etc organized so you know what goes where when you put it back together. I may get an NLD coreboard at some point. If I do I will do a video. At the moment my M2P is on the earlier FW and I have NFZ hacked so no real motivation at the momment.

[2020-09-15 13:54:13] dexlarpsn : @ben_lin Its probably ready for 2022 christmas eve

[2020-09-15 19:55:37] coldflake : @dexlarpsn bye bye ban hammer for you

[2020-09-15 20:02:23] coldflake : During the past 3 years since we started this slack workspace, I have only swung the ban hammer twice

[2020-09-15 20:04:24] coldflake : There is high to the ceiling here but that BS is not tolerated and it doesn't make it a nice place in here. People like him belongs on shitty Facebook or similar shit holes of the internet

[2020-09-15 20:05:00] coldflake : The core boards are delayed 6 days as our shipment has been stuck in HK due to covid

[2020-09-15 20:05:43] coldflake : We will make a blog post tomorrow regarding that and everyone will receive a tracking number as soon as it is shipped

[2020-09-15 20:06:38] coldflake : We have them in the 19rh to be exact and then we pack them during the night and DHL picks them up on the 20th

[2020-09-15 20:07:23] coldflake : They will be shipped wirh DHL express so it should reach you in 3 working days or less depending on where you are located

[2020-09-15 20:07:51] coldflake : The US will have them in 3 days, Europe in 1 to 2 days after being shipped

[2020-09-15 21:01:47] coldflake : We will have a new batch of 200 boards coming in a short while

[2020-09-15 21:02:00] coldflake : The first batch of 45 went in two days

[2020-09-15 21:02:24] coldflake : We will open for pre-order when we know exactly what time the next batch will arrive

[2020-09-16 05:11:02] coldflake : No wirh this core board you can freely upgrade and downgrade all you want. The good news is that we always will be able to make our mods for latest firmware. In fact, we don't even have to change our mods to be firmware specific so as soon as dji releases a new fw you will be able to remove fcc and nfz straight away. Alt limit is for many people the Holy grail and we are working on that too.

[2020-09-16 08:52:03] dnapappas0112 : @coldflake I'm suprized you let that troll go this long. He was only here to be an ass.

[2020-09-16 10:16:46] jonathanbogaert5 : Then you need to read, I am/was longer here than you @dnapappas0112. Dont talk like you know me because I was trolling for a while.

[2020-09-16 11:00:48] dkovar : The point being, you are trolling. Stop it, or you’ll get kicked again.

[2020-09-16 12:05:10] ben_lin : I plug in my mavic2 and don't see the page to make an APK in NLD client?

[2020-09-16 12:05:13] ben_lin : @coldflake

[2020-09-16 12:23:38] coldflake : Because those versions of the go app are not compatible with m2

[2020-09-16 12:26:22] ben_lin : but i do need the app for older AC

[2020-09-16 12:27:14] ben_lin : i think many would prefer to have that option there too

[2020-09-16 12:30:58] coldflake : Then plug in the older ac

[2020-09-16 12:31:23] coldflake : People gets totally confused and hammer support why the go app doesnt work for their m2

[2020-09-16 12:31:54] coldflake : That's why nld v2 only shows what is compatible for the drone / firmware that is plugged in

[2020-09-18 08:19:15] dnapappas0112 : @coldflake, question. I saw a little while back you said something about SP and galileo causing fly away in some cases. Is that because someone used SP before trying NLD? Is galileo not gonna work at all no matter how it gets setup or was that just a SP problem? If it does work with NLD then I would like to give it a shot. I currently have a P4 and the P4Pv1. I know you said you did a write up about it and had a link to it but when I clicked the link it did't come up, thats why I'm asking. I will never use SP or anything else out there that is free or copied works. I will be staying with NLD period. Atleast you guys answer questions and have solutions to problems if they arize.

[2020-09-18 09:44:46] bin4ry : only p4pv1 has problems with galileo. when you did a mission with bad gps reception but good galileo then the AC will RTH and now comes the problem RTH does not work for some strange reason it shows RTH but switches to ATTI..... that is a big problem. in DRONEHACKS i build the customFC for this aircraft without galileo, i think @coldflake did the same with NLD. hope that explains the issue a bit for your @dnapappas0112

[2020-09-18 10:13:31] coldflake : Yes @bin4ry exactly, no Galileo on the p4pv1, also removed it

[2020-09-18 10:19:56] cantrepeat : Just to clarify, MPP doesn't have an issue with custom FC using galileo?

[2020-09-18 10:20:02] bin4ry : no

[2020-09-18 10:20:09] bin4ry : only p4pv1

[2020-09-18 12:02:12] cantrepeat : Thanks @bin4ry

[2020-09-18 13:52:14] oakley75 : I can honestly say my mp1 danced allot in the air with galileo sats. Back stable after galileo removed.

[2020-09-18 13:54:51] cantrepeat : You can dance if you want to...

[2020-09-18 14:05:22] fredmicrowave : I wish I could remove Galileo on NLD with MP1

[2020-09-18 14:09:51] fredmicrowave : I mean on Mp1 with NLD lol

[2020-09-18 18:28:13] digdat0 : i thought on github, there was a firmware file which reversed the Galileo gps part

[2020-09-18 18:36:26] digdat0 : <https://github.com/o-gs/DJI_FC_Patcher/issues/4> Not FW, but steps to update the patcher files to re-compile. Does NLD cfc include Galileo GPS?

[2020-09-18 21:29:49] fredmicrowave : Yes, it shows "Galileo" as activated, when you opt for custom FC, but no way to opt out, afaik.

[2020-09-18 21:34:30] fredmicrowave : And while flying I have seen some strange GPS error messages, for a few seconds. Like: "Gps error. Solution: restart aircraft" :smile: ( If I remember correctly) I don´t really need Galileo. And flying above big waves with lots of wind, I don't want to see error messages...

[2020-09-18 21:50:55] fredmicrowave : ...and rain :laughing:

[2020-09-19 08:41:41] fstephan1 : GPS (der FC crasht), wenn mehr als 22 Satelliten gefunden werden, man muss den gps ublox m8n Empfänger auf maximal 21 Satelliten konfigurieren. GPS (the FC crashes), if more than 22 satellites are found, you have to configure the gps ublox m8n receiver to a maximum of 21 satellites. More details -> <https://github.com/brett8883/DJI_Super-Patcher/issues/130>

[2020-09-19 08:45:32] dnapappas0112 : Thanks for the reply @bin4ry and @coldflake. I appreciate the explanation. Also, thanks very much for you guys working on this stuff and for your continuing support. I try to follow you guys on here as much as I can, you can never stop learning, right? Anyways, like I said I have a P4 and a P4Pv1. The P4 is modded, both the bird and controller for external antennas, the P4P is not. I can mod that one as well. If you guys need someone with one of those birds to test something, I would try to give you a hand. Thanks again for the replies guys.

[2020-09-19 08:56:32] coldflake : @frederic.rigault It's already removed for mp1 as it already have caused enough worry and honestly, without Galileo there is plenty of GPS reception

[2020-09-19 11:37:50] fredmicrowave : @coldflake Thanks, yes I see no real need for that many sats as long as regular GPS are working fine. But did you remove it very recently ? Because on mine It shows as activated on NLD, should I disable and reinstall CFC again ?

[2020-09-19 13:10:46] coldflake : It's just the app showing it, it has been removed from the actual FC. In the next update it will be removed from the app ;)

[2020-09-19 15:40:39] fredmicrowave : Ok good. I was still getting 20+ sats, so I assumed Galileo were included, but that may be just regular GPS... Tnx!

[2020-09-20 12:38:06] reaktor : Hi Dave, I can tell you I was one person who lost my p4p first flight after trying SP. It launched OK, then GPS started going crazy. Lost my p4p somewhere over a city. RTH did not work as the phantom no longer knew its position and drifted behind buildings.

[2020-09-20 13:23:02] the_lord : is it using NLD go app or other method?

[2020-09-21 15:10:14] rainer.kerncn : I already ordered the core board. Definitely the way forward and I want to suppory the efforts but of course for me as said - ALT limit is for me most important

[2020-09-22 19:00:43] the_lord : Any idea what’s wrong?

[2020-09-22 19:03:03] the_lord :

[2020-09-22 19:03:56] the_lord : Also without boost

[2020-09-22 19:29:41] the_lord : Also failed to downgrade

[2020-09-22 19:34:34] digdat0 : What version of firmware on your inspire2? Latest of 1.02.0500?

[2020-09-22 19:35:10] the_lord : First I flashed it with NLD to latest 1.02.0400

[2020-09-22 19:35:21] the_lord : It failed to fcc and boost

[2020-09-22 19:35:34] the_lord : I tried to downgrade to .0200 and it failed

[2020-09-22 19:45:45] the_lord : I rooted it and removed anti rollback manually Now im flashing it to 1.02.0200 using NLD

[2020-09-22 19:59:19] the_lord : It failed to apply FCC on 1.02.0200 :disappointed:

[2020-09-22 20:03:46] the_lord :

[2020-09-22 20:43:57] fredmicrowave : Win7 ?

[2020-09-22 22:24:20] the_lord : 10

[2020-09-23 09:15:27] coldflake : Very weird, send a ticket to support and I can tell you what is going on from looking at the syslog

[2020-09-23 12:41:32] coldflake : Thanks

[2020-09-23 12:43:29] the_lord : I just tried FCC / Boost after opening the ticket and it didn't give me error :open_mouth:

[2020-09-23 12:47:03] the_lord : how can I tell that it is on FCC now? number of channels didn't change and how can I revert back to CE if its really applied?

[2020-09-24 08:38:09] pingspike : @the_lord try this <https://dji.retroroms.info/howto/dji_configs#is_fcc_mod_working_how_to_check>

[2020-09-24 08:39:49] the_lord : thanks but this doesn't work

[2020-09-24 08:40:52] the_lord : i'll try 4.1.12 and see

[2020-09-25 21:28:55] joandeclerc1992 : @coldflake Why are you confirming to customers that the unlocked boards removes height limit, when you clearly said yourself that it doesn't?

[2020-09-25 22:36:02] coldflake : We never said that the board removed alt limit as the board alone, it needs a custom FC

[2020-09-25 22:37:08] coldflake : We are not confirming that to customers, wtf kinda bs is that to say?

[2020-09-25 22:37:59] coldflake : Spreading such BS is ridiculous and you will get the ban hammer again

[2020-09-25 22:46:32] coldflake : @dexlarpsn Trolling is not acceptable in this forum and we will not tolerate it. You already got a ban previously. You clearly need some kind of help with your disorders but we are not psychiatrist only reverse engineers. If I see you around again or you show up with another account you will be banned immediately. I will make sure to i for the other admins not to accept your request going forward.

[2020-09-29 04:31:37] reaktor : This channel needs psychiatrists...

[2020-09-29 08:08:08] fstephan1 : The psychiatrist works one houer here, now he need 5 hours supervision to get his head clear....

[2020-10-01 09:00:54] coldflake : lol yes :)

[2020-10-02 16:00:17] cat.db : before nld say can switch fcc in drone ,about i2,4p, but why now it says can not ？@coldflake

[2020-10-02 16:02:02] coldflake : Because we didn't realize that those two birds were using Light bridge and our FCC mod is for occusync. However, we are now finding the duml for light bridge and will put it in as soon as we have made it work. Unfortunate blunder, sorry for that

[2020-10-02 16:02:43] coldflake : We had beta testers who reported back that it worked but they clearly didn't know how to check it properly

[2020-10-02 16:03:19] coldflake : They assumed it worked because they could fly further away but whatever condition made that happen was not the FCC patch at least

[2020-10-02 16:04:15] coldflake : If used with the nld go app, they can switch to fcc mode BTW

[2020-10-02 16:05:01] coldflake : But as a patch for the bird itself not and as I mentioned before, we are looking into that so that we can make it the same for all birds that we support

[2020-10-03 02:20:44] cat.db : why p4s can ?

[2020-10-05 12:28:40] cs2000 : P4s is Ocysync, thats why

[2020-10-05 12:52:15] dronepilot : P4s is ocusync? Though it was lightbridge.

[2020-10-05 12:52:49] loaderbull : Ocusync 1 isn’t it? I may be wrong

[2020-10-05 12:53:24] loaderbull : P4P V2 is ocusync 2

[2020-10-05 12:53:32] cs2000 : Correct. The last Lightbridge devices were the P3 Adv and Pro (P3S was just wifi). P4 moved to Ocusync V1

[2020-10-05 12:53:50] cs2000 : Obviously newer models are Ocusync V2

[2020-10-05 17:34:54] dronepilot : I think P4s, P4a and P4p are lightbridge. Ocusync only P4P v2.0

[2020-10-05 17:40:16] originaldobo007 : That is correct.

[2020-10-05 20:58:13] cat.db : yes,i have solve the problem about p4s open fcc in drone.

[2020-10-05 20:59:21] cat.db : p4s 's transmission like p3,not oc.

[2020-10-06 01:47:05] oakley75 : Thanks for the clarification.

[2020-10-08 18:52:32] originaldobo007 : Interesting: <https://nolimitdronez.com/boards/topic/3815/nld-mavic-2-pro-root-core-board>

[2020-10-09 14:25:37] fbi.airfield51 : I got that, I just saw I can't remove limits yet. Installed last night

[2020-10-09 21:54:37] originaldobo007 : So out of curiosity- with no limits being able to be removed- what do you get with the $450 purchase?

[2020-10-09 22:02:35] fbi.airfield51 : So far offline activated and no real serial #

[2020-10-09 23:22:08] fredmicrowave : Only that is freaking awesome...

[2020-10-17 15:39:28] 007 : Hi. The NLD Web is down ?

[2020-10-17 16:00:11] fredmicrowave : I have seen this mentioned on the forum too, but it is working fine for me.

[2020-10-17 16:00:43] 007 : :+1:

[2020-10-20 14:07:21] hazardc : crazy waws just reading back and saw how many ppl had the super-patcher p4p super-fuckup ... count me in on that one. mine went atti for asecond then force landed and got got caught up in a fence... drove a mile hauling ass through town and could hear the blades beating so loud it sounded like a chainsaw.. haven't even flown it since, don't know how to rid it of the GPS .. it was the day after a m1p battery i bought from some clown on ebay died 25 seconds into a hover and just free-fell onto the ground, don't know the damage but i assume "gimbal cable"" ... week after a falcon dove at my air2 .... i have ptsd to even fly anymore lol

[2020-10-20 14:10:42] hazardc : I felt like a fucking moron for modding my p4p after that but have also been bummed since they took away 32channel mode on it ... was surprised out of all the ddrones i used SP on, even the spark + boost ... never had an issue except the p4p.. i guess the gps units are probably older ? I just wish brett would have removed it or made it super obvious there was an issue with gps on the p4p because .... it's a fkn p4p ...

[2020-10-20 14:11:46] hazardc : What's the deal with NLD claiming boost mode on p4p now? Is this a real thing? I have a NLD code that i haven't even used yet because i'm waiting to decide what bird to use it on.

[2020-10-20 14:14:49] hazardc : @coldflake -- could you give me more info on the p4p v1 boost mode you guys are advertising (or if it's in error? what about the old 32channel that went away and never came back?) Also, everyone else above discussing p4p/occusync/etc ... p4p1 is lightbridge p4pv2 is occusync 2

[2020-10-20 15:02:43] fstephan1 : NLD has a mod Go4 App, this is the only to get FCC and burst to Lightbridge...

[2020-10-20 15:13:53] fbi.airfield51 : One day I hope NLD is able to mod newer versions of GO 4

[2020-10-20 15:32:22] hazardc : thx

[2020-10-20 15:32:49] hazardc : i see boost mode for original p4p was changed either way on the website

[2020-10-20 16:41:04] coldflake : We do not have FCC boost for light bridge, that was an error in the birdmap as some thought all P4s are the same in that regard. P4P can NOT use galileo mod, it fucks it up completely and we have never included it in our CFC for P4. It works fine on the other birds though but really what is the purpose? Its not like it makes the bird anymore accurate in the positioning. Brett did not know what he was doing and thought that one size fits all which had some severe consequences for P4P users experiencing flyaways and what not. I know this because I had to investigate it further as one user claimed that NLD fucked up his bird. If NLD detects a CFC, it just bypasses it as overwriting something someone else made can also be problematic and cause erratic behaviours.

[2020-10-20 16:41:25] coldflake : The user mentioned, well a couple actually, all had SP installed previously before using NLD

[2020-10-20 16:42:39] coldflake : I can also tell that we are looking into FCC mod for P4P on LB, it is just a different duml command but with all our new M2 stuff coming out, I havent had the time to sniff the duml from the patched NLD GO that puts it into FCC mode

[2020-10-20 16:43:07] coldflake : @fbi.airfield51 We have some people working on it with a pretty good bounty as the carrot

[2020-10-20 16:43:39] coldflake : The secneo that dji uses for their go app is NOT easy to crack at all so the bounty gets bigger and bigger lol

[2020-10-20 22:21:18] chipmangini : @coldflake I just connected my P4P to make sure that boost/galileo were not running on it and this is what I did on NLD 2.0.0.9. Flashed stock 01.05.0600, twice (to make sure). As you can see in the first picture, it shows Galileo GPS Sat as disabled. I then flashed the CFC, and as you can see it was successful. The problem is that in the final picture, it shows my P4P with Galileo GPS Sat as enabled. Is this a glitch in the software, or should I be weary of my bird?

[2020-10-20 22:22:39] chipmangini :

[2020-10-20 22:23:02] chipmangini :

[2020-10-20 22:53:15] fbi.airfield51 : 2.0.0.9 on a none rooted board .510 m2p is getting shut down by windows during flashing like crazy (2 outta 10 times didn't crash) and my rooted board m2p fails activation with key given with board, made a ticket.

[2020-10-20 23:01:30] fbi.airfield51 : I have only had a nld client have a "low resource error" pop up but the nld software still flashed firmware in background with error.

[2020-10-21 01:53:34] fbi.airfield51 : This error came up while I had the app open, no drone plugged in, went to eat came back and this error that didn't shut it down like flashing came up

[2020-10-21 02:56:06] fredmicrowave : Did you try to run it as admin ?

[2020-10-21 03:46:39] coldflake : @fbi.airfield51 Thank you very much for reporting back!

[2020-10-21 03:47:48] coldflake : The Galileo enabled is an artifact left behind which we forgot to 5o remove after we decided to remove Galileo from all our CFCs so don't worry about that. If you did a successful flash and reapplied it is gone.

[2020-10-21 03:48:53] coldflake : Regarding the access violation, I have been on the hunt for that for a while. It happend seemingly random but your report gave me a very good hint where to find and eliminate it, thank you very much for letting me know

[2020-10-28 15:01:51] fstephan1 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.0.11

[2020-11-03 11:28:41] fbi.airfield51 : NLD fourm down?

[2020-11-03 11:30:27] fbi.airfield51 : Wrote a ticket for question didn't get a response, went to read fourms and noticed its not in dropdown menu

[2020-11-05 17:04:56] fredmicrowave : Yes, I noticed that too, thought it was temporary, but it has been a while ... Maybe it was easier to delete the whole forum than threads one by one .

[2020-11-05 18:08:39] coldflake : To be honest I got tired of people's BS and throwing up in there. Only a few posts were legit but really, people who dumb as fuck posted all kinds of shit and I don't have to moderate that crap.

[2020-11-05 18:08:44] coldflake : So yes it's gone for good

[2020-11-05 18:09:37] coldflake : Instead I am focusing on a new release that will fix those issues people have been experiencing and also there will be a live stats on the main page showing the success rate of all mods applied the last 24 hours / week and month

[2020-11-05 18:11:02] fbi.airfield51 : Sorry, I was trying to patient but I understand, there was alot of people on there trying being bitchy

[2020-11-05 18:11:18] coldflake : Yes, you sent a ticket to support?

[2020-11-05 18:12:13] coldflake : The forum was only being used as a puke site for a minority of people who really didn't understand that they fucked it all up themselves. Like installing super patcher on top of the nld patch and then whine that nld broke their drone and what not

[2020-11-05 18:12:22] fbi.airfield51 : Yes, wasn't sure if boards were close to ready yet, I'm trying to get another bird done

[2020-11-05 18:12:36] coldflake : The m2 core boards?

[2020-11-05 18:12:40] fbi.airfield51 : Yes

[2020-11-05 18:13:18] coldflake : We are getting some more within a relative short time

[2020-11-05 18:13:28] coldflake : The thing is, that dji is following our every move

[2020-11-05 18:13:48] coldflake : And now they are trying to restrict sales of main boards which need to modify them

[2020-11-05 18:14:03] coldflake : Before we could buy main boards in bulk

[2020-11-05 18:14:26] coldflake : Now we are trying to source them from everywhere one can think of

[2020-11-05 18:15:01] coldflake : But.. We will soon offer a service where people can send their stock board and have it downgraded to 100 or have it set into factory mode

[2020-11-05 18:15:09] coldflake : Aka perm root

[2020-11-05 18:15:47] coldflake : It was just much nicer for people to buy an extra board so they wont lose it if they send in their bird for repair as dji usually just replace them

[2020-11-05 18:16:50] fbi.airfield51 : I get that, but i figure when board goes in its mine not going to dji ever again

[2020-11-05 18:17:22] fbi.airfield51 : Everything from there on in is on me not dji

[2020-11-05 18:18:23] fbi.airfield51 : That's for update though, if you get them back in stock and post them I'll do another , or two. Thanks

[2020-11-05 18:22:24] coldflake : Super!

[2020-11-05 18:22:39] coldflake : We have 40 for the m2 enterprise but they are ridiculously expensive

[2020-11-05 18:23:13] coldflake : We will put them up for ordering in a couple of days

[2020-11-05 18:24:13] fbi.airfield51 : I was asking because I was thinking about purchasing a dual , I was toying with the idea but I'm not sure because they aren't cheap to start with and I don't do enough night flights here

[2020-11-05 18:24:42] coldflake : We habe 10 for the dual too

[2020-11-05 18:24:52] coldflake : Have*

[2020-11-05 18:48:57] mingtao : Coreboard from m2e diff thant m2de

[2020-11-05 20:32:11] coldflake : Yes there is a difference

[2020-11-05 20:32:31] coldflake : Anyone who wants to be forum moderators BTW?

[2020-11-05 20:35:07] pingspike : :runner::skin-tone-2:

[2020-11-05 20:42:05] coldflake : @rich Run Forrest, run! lol

[2020-11-05 20:42:28] coldflake : It could a little $ in the PayPal Account for some monthly fun :)

[2020-11-06 12:13:38] fredmicrowave : Yes, but when will we have mini2 alt and nfz removed ? :smile:

[2020-11-06 14:38:58] jcase : @fredmicrowave mm2 would be hard on alt

[2020-11-06 14:39:03] jcase : nfz is going to be easy

[2020-11-06 14:39:17] jcase : but the FC appears to be encrypted as expected, and if its encrypted like the mm

[2020-11-06 14:39:20] jcase : then its going to be hard imo

[2020-11-06 14:39:28] jcase : if not hard, actually time consuming

[2020-11-06 14:39:55] jcase : could probably do NFZ ins 3-4 hr if you were versed enough

[2020-11-06 14:40:02] jcase : maybe less

[2020-11-06 14:40:13] jcase : i dont have my hands on one yet but ive looked at the firmware

[2020-11-06 14:51:06] fredmicrowave : I don´t have one either @jcase, (nor I am minimally versed), was just ironising as people have been constantly bugging NLD for M2 alt removal , and as it already looks really hard to do, Mm2 would be next nerve-wrecking bird for NLD ... Good to know that NFZ looks relatively easy though...

[2020-11-06 14:52:04] jcase : NFZ is easy on all dji drones

[2020-11-06 14:52:07] jcase : so many ways to do it

[2020-11-06 14:53:27] fredmicrowave : Personally I woud like Alt, but we´ll see.

[2020-11-06 14:53:40] fbi.airfield51 : Nfz removal on m2p on a higher firmware would be nice though

[2020-11-06 14:58:59] fbi.airfield51 : Could nld do some sort of mod to remote to fix alt removal? Since I've been told it can't be done by board alone that's what I would assume?

[2020-11-06 15:07:40] bin4ry : no. remote is not involved

[2020-11-06 15:19:45] dronepilot : @jcase M2 altitude removal on latest firmware is possible?

[2020-11-06 15:20:38] fbi.airfield51 : When its out we would know.(for us regular users) I live next to mountains where this is pretty much needed(not just for fun) depending on which direction I want to go. Sucks being in tall hills with height limits.

[2020-11-06 15:21:22] jcase : @rgf8aerial of course

[2020-11-06 15:21:23] fredmicrowave : M2 altitude is not publicly possible in any firmware for M2

[2020-11-06 15:21:37] jcase : everything is, just depends on how much work you wnat to do

[2020-11-06 15:22:37] fredmicrowave : hence the "publicly" , was thinking of you @jcase :smile:

[2020-11-07 11:42:26] ansi0138 : Hello! I want to test the firmware V01.02.0500 for Inspire 2, can I then return to V01.02.0300 from it? someone already tried it?

[2020-11-09 17:42:51] david077 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.1.11

[2020-11-10 10:51:14] david077 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.1.13

[2020-11-10 12:01:11] d95gas : :+1: Good one guys

[2020-11-10 13:09:44] coldflake : We keep them coming in a steady stream now :slightly_smiling_face:

[2020-11-10 15:28:33] david077 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.1.14

[2020-11-10 16:49:21] fredmicrowave : Version is not updated on NLD, any info on what is new ?

[2020-11-10 17:00:37] david077 : @fredmicrowave 2.0.1.14 - A bug fix release

[2020-11-11 03:27:19] bobdole : EConvertError in module NLDUpdater.exe at 0000811A. " is not a valid integer value

[2020-11-11 03:27:58] bobdole : gonna make me go to the website and download it that way eh?

[2020-11-11 12:20:42] coldflake : very strange

[2020-11-11 12:21:03] coldflake : it looks like it did not get a reply from the server and tries to parse it anyway

[2020-11-11 12:21:08] coldflake : have you tried to launch it again?

[2020-11-11 15:02:53] david077 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.1.15

[2020-11-11 18:03:47] bobdole : i just downloaded the new version. the one i was using was unable to upgrade itself out of whatever old version i was using

[2020-11-13 08:30:37] tsun : wasn't 2.0.0.9 supposed to be the most stable NLD release ever? :smile:

[2020-11-13 08:30:56] tsun : and yet we keep getting bug fix after bug fix

[2020-11-13 16:35:11] fbi.airfield51 : Upgraded to .15 upgraded m2p firmware to the new .670, after upgrade nld didn't recognize update, still showed .510, thought there was a upgrade flash problem so I closed nld and reopened, then it showed .670 was uploaded, went to double flash and got a windows forced closed nld error

[2020-11-14 09:34:18] coldflake : @mrmarecki Just be glad that we do bug fixes. Its always easy to sit where you sit without any real knowledge of what is going on or how it is to support several models across several firmwares. If you have ever produced any kind of production code you would know that there a variety of scenarios where stuff just works differently due to peoples hardware setups that has nothing to do with the software actually. If you knew how many people who is still using Windows 7 and the problems that causes with ADB. The updates we are pushing now is addressing all those weird scenarios which is only experienced by very few users. We want nld to be working 100% for everyone and at least explain the user how to fix it.

[2020-11-17 13:24:49] fbi.airfield51 : For the service your talking about to send boards in, does the user have to stay on .100 after they get it back? Meaning not aloud to upgrade to newer firmwares?

[2020-11-17 22:28:13] fbi.airfield51 : And is there a date for the 2nd client-update for NLD rooted board to be released?

[2020-11-18 13:30:38] originaldobo007 : As far as I know - nope. The rooted boards will not help with altitude limit removal.

[2020-11-18 13:34:09] fbi.airfield51 : Oh, I was under impression it would be, then wouldn't be, seemed back and forth but this is last I saw.

[2020-11-18 13:36:55] fbi.airfield51 : So now I'm not sure what to think anymore

[2020-11-18 23:04:28] fredmicrowave : I believe they are working on this. I think a custom FC firmware needs to be made for alt,. Then, the boards being rooted, they can be upgraded with it. It would seems logical to get a Fc firmware from a working drone and modify it, but it must be more complicated than that.

[2020-11-19 03:24:41] tsun : supposedly it's coming even for the stock boards: <https://dji-rev.slack.com/archives/C5ZR0QXUG/p1603095748202700>

[2020-11-19 06:54:10] fbi.airfield51 : I got my fingers crossed, I hope so.(so many mixed messages I'm not sure what will really happen) he hasn't talked about any updated info lately

[2020-11-20 21:05:14] coldflake : @fbi.airfield51 You can go all the way up to 400 and downgrade again to 100 as long as you don't use assistant and the booby trapped firmwares

[2020-11-20 21:27:29] bobdole : unfortunately they're shipping m2's with 670

[2020-11-21 07:02:38] buundy : So I am interedted how are these unlocked boards work? Is it done in the factory or is it a hw modification? Or you put the board in some kind of programming state and flip a sw switch then it is unlocked? I just repair drones as a business and I am mostly into hw stuff, that is why i am interested.

[2020-11-21 15:50:46] rickw001 : I'll bet you are,lol

[2020-11-21 17:48:20] coldflake : That is information we can not disclose unfortunately

[2020-11-21 17:49:06] coldflake : @jacksphone We are launching a service within the next days where people can send their board to us and have it downgraded to 100

[2020-11-21 17:49:52] coldflake : The permanently rooted boards a so expensive to produce so we will offer that service as an alternative.

[2020-11-21 17:50:56] coldflake : One can also chose to buy a stock board that has already been rolled back to 100 so that you don't have to send the original board and can have it delivered next day with DHL express

[2020-11-26 00:20:52] coldflake : @fbi.airfield51 We are working on it and is doing our best. The core board paves the way for it, we still need to do some more fiddling to get around the altitude limit.

[2020-12-16 14:17:10] 007 : 2.0.1.17 what's new ?

[2020-12-17 09:55:28] coldflake : Nothing interesting, changed from Board Serial Number to Flight Controller serial number.

[2020-12-17 09:59:48] 007 : Very interesting

[2020-12-17 11:28:07] fstephan1 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.1.18

[2020-12-17 12:07:10] d95gas : @coldflake Just did the update (windows 10 x64), it ran the updater, now the NLD app is corrupted and wont run. Went to download a new version from Site and the download is for an older version and getting a 404 error from it

[2020-12-17 12:08:59] d95gas : Just tried again with an older version, updater did its job, but again left with a corrupted NLD app.

[2020-12-17 12:09:35] d95gas :

[2020-12-17 12:10:24] d95gas : Which is the same message I get when I updated in the first place with the last version

[2020-12-18 05:45:13] coldflake : Oh shit, is it still a problem?

[2020-12-18 05:45:41] coldflake : The files got deleted from the server due to an automated process that ran

[2020-12-18 06:16:08] d95gas : I have downloaded the new version now and thats running fine :slightly_smiling_face:

[2020-12-21 21:25:41] plaaggeest : This would be a great Xmas present if you guys get this working :)

[2020-12-21 22:11:32] coldflake : Super, a new version is coming out again soon btw

[2020-12-21 22:11:46] coldflake : There will be a rapid release schedule for the next two weeks

[2020-12-21 22:47:27] fstephan1 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.1.19

[2020-12-29 14:01:54] werner.barz : Hello everybody

[2020-12-29 14:06:14] werner.barz : I used the new version 2.0.1.19 for my Mavic 2 Enterprise Dual with SW 01.01.0800 for FCCBoost. After applying to the aircraft I lost my radio link to the smart controller and still are not able to re-connect to the controller. Also its not possible to refresh the firmware with the Assistant 2 sw. It stucks on 68%, rebooting two times and finished the connection to the Mavic

[2020-12-29 14:09:21] werner.barz : I suppose it destroyed the RF Modul programming. Are there anyone with the same experience?

[2021-01-05 23:17:05] fstephan1 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.1.22

[2021-01-06 22:50:20] irischnpak : Where can I find the changelog for NLD?

[2021-01-07 01:46:51] fstephan1 : -> <https://nolimitdronez.com/news> <-

[2021-01-07 15:22:09] fstephan1 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.1.23

[2021-01-28 16:41:09] ben_lin : so quiet recently

[2021-01-28 16:53:00] pingspike : :shushing_face:

[2021-01-28 16:55:21] ben_lin : anything in the pipeline?

[2021-01-28 17:00:42] heresmydron : i have a theory

[2021-01-28 17:01:00] heresmydron : there are multiple exploits for all the "modern" DJI family

[2021-01-28 17:01:33] heresmydron : BUT neither DH nor NLD is realeasing anything until mavic 3 gets released and they test their current exploits against it

[2021-01-28 17:01:48] heresmydron : anyway thats my conspiracy theory, thanks for coming to my ted talk

[2021-01-28 17:02:49] heresmydron : (by modern i mean minis, ma2 and m2 past firmware 510)

[2021-01-28 17:13:43] ben_lin : m3 is nowhere close to be released yet

[2021-01-28 19:52:23] heresmydron : doesnt change anything

[2021-01-28 19:53:32] heresmydron : btw its just mental gymnastics :smile:

[2021-01-28 20:51:01] pingspike : I don’t even know if anyone apart from coldflake is working on NLD anymore?

[2021-01-31 07:36:38] coldflake : Yes we are now 4 guys working on nld and we have a lot of new stuff in the pipeline

[2021-01-31 07:37:09] coldflake : And is busy as hell as well

[2021-02-01 16:13:18] ben_lin : are u guys still working on that software option for m2?

[2021-02-01 16:13:26] ben_lin : i'd pay 200 for that

[2021-02-03 14:58:38] cloudwerx : Is good option to rollback .670 is to return your Mavic to the store

[2021-02-04 00:09:54] dnacho : Any way to remove nfz from this mavic 2 enterprise

[2021-02-04 00:10:16] dnacho :

[2021-02-05 16:25:20] coldflake : Yes, we have special core boards for M2 Enterprise which allows nfz removal on all firmwares

[2021-02-05 16:26:01] coldflake : [https://nolimitdronez.com/mavic-2-enterprise-nld-core-board](https://nolimitdronez.com/mavic-2-enterprise-nld-core-board)

[2021-02-05 17:54:51] dnacho : Thank you, I'll look into them

[2021-02-23 14:44:58] zashraf1337 : Morning, I am new here and super excited to be here. I am security research experience around Android and Windows. I am hoping to get some suggestions for projects to get started on, perhaps a tutorial / blog walkthrough or an overview of different project, if anyone is willing to assist please DM. Thanks.

[2021-03-08 19:39:02] cloudwerx : Hey @coldflake would the rooted mavic 2 enterprise board work in a normal mavic 2? I desperately want root on my Mavic 2 but stuck at . 670, want to bust this thing out of DJIs prison but have a LOT to learn before I attempt to attack my board myself

[2021-03-08 23:49:31] jcase : hmm

[2021-03-08 23:49:51] jcase : no it would cause issues (possibly very minor), unless you changed it to the correct firmware, then perhaps it wold work

[2021-03-09 00:07:15] cloudwerx : K, was worth a shot lol

[2021-03-18 22:01:59] coldflake : @tylerpublic It works fine, just upgrade it to latest FW and do a vision calibration in Assistant. Connect the RC and do a IMU calibration too and you are good to go. Those boards are brand new do not have calibration data on them nor do they have a serial number, it is 00000000000000

[2021-03-18 22:02:15] coldflake : ...and does not require activation I might add :slightly_smiling_face:

[2021-03-24 15:57:14] 007 : What's new in 2.0.1.25 ?

[2021-03-24 17:20:21] coldflake : A handful of bug fixes and support for our new core boards

[2021-03-28 20:28:27] fstephan1 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.1.25

[2021-03-29 21:47:49] dronepilot : Any boost for air 2 on the way?

[2021-03-31 05:57:41] ben_lin : any NLD news for dji fpv？

[2021-03-31 07:39:12] coldflake : Yes, we and some other great news that will make people have to pick up their yaw from the floor ;)

[2021-03-31 07:40:49] coldflake : @rgf8aerial Yes, it comes alongside the yaw dropping as mentioned above :)

[2021-04-01 00:09:55] dronepilot : Any time soon @coldflake

[2021-04-02 17:39:48] pingspike : Easter Sale :hatching_chick: :hatched_chick:

[2021-04-02 19:01:17] originaldobo007 : A jaw-dropping Easter sale.

[2021-04-03 08:13:46] coldflake : Indeed :)

[2021-04-14 04:07:08] dnacho : Any update on the news

[2021-04-16 13:53:41] djibot.5150 : The nld core boards for pro/zoom still say on back order do you expect more?

[2021-04-19 23:00:28] dronepilot : Any fcc boost for air 2 any where soon?

[2021-04-22 22:24:37] coldflake : @djibot.5150 Yes, in 8 days we will send out the new batch, hurry up and preorder, they are almost gone already

[2021-05-18 09:37:10] dronecat : Any progress to speak of on .300 NFZ? .100 is nice to rid the nfz but .300 has much better features. 40 price jump and increasing the enterprise price was a deal breaker, i would have purchased it if price didn't rise, sorry.

[2021-05-18 13:02:20] fredmicrowave : What a strange move to rise price when nothing new has been out for months.

[2021-05-22 09:58:37] coldflake : Raise price on what?

[2021-05-22 09:59:36] coldflake : On the boards?

[2021-05-22 10:01:38] coldflake : We only have a handful of boards left and had raise the price a little to be able to get an even bigger batch the next time. That was the reason for the price increase.

[2021-05-22 10:03:07] coldflake : Finally, they are brand new and never used, just go check what a used 2nd hand stock board costs

[2021-05-22 10:03:24] coldflake : It is crazy how the prices on main boards have increased

[2021-05-22 10:04:17] coldflake : We don't sell them to sell main boards, we sell them to provide a nfz removal option for those who really need it.

[2021-05-22 10:05:31] coldflake : When all that is said, we might put them back to 499 but let's see

[2021-05-24 06:13:23] coldflake : The M2 Pro/Zoom Rooted Core Board is now back at 499 as requested. @dronecat no more excuses anymore for not buying one! LOL

[2021-05-24 15:56:34] fredmicrowave : No, I was talking about the increase Drone C was making reference to just above.

[2021-05-29 12:58:02] coldflake : @fredmicrowave The boards are a physical product and regardless of something new, they are of course priced by demand and availability. Provide med just 1 link to anyone who sells this board and I will give it to you for free.

[2021-05-29 12:59:20] coldflake : We are the only one selling these boards so why do people whine and expect that it costs the same as a stock board. Not to mention that you can NOT buy a brand new stock board anywhere and 2nd hand boards costs an arm and a leg.

[2021-05-29 13:00:06] coldflake : People complain wirhout applying a little logic first

[2021-05-29 13:01:39] coldflake : I could also say, if you find it too expensive, buy it somewhere else...

[2021-05-29 21:19:08] fredmicrowave : @coldflake again, I was NOT talking about the boards, I have nothing to say about the boards, I'm fine with them and their price. My remark was about @dronecat saying (just 5 posts above) that NLD increased its licence prices to 40 , and i though it was a strange move since there is no new feature on it.

[2021-05-29 21:20:10] coldflake : Ahh I see. The price for the license key has been 40 since September last year

[2021-05-29 21:21:34] coldflake : Speaking of something new, we are coming out with a much improved fcc boost for M2. It will allow to switch frequency on the fly with the RC and other cool stuff.

[2021-06-15 13:26:06] fredmicrowave : @coldflake Is any work being done about DroneId on M2? That would be very cool, among other things, (alt limit is not everything) .

[2021-06-15 13:40:13] coldflake : You are ever so right, and yes we have something for drone id coming up. We should have released it long ago but better late than never

[2021-06-15 19:31:28] fredmicrowave : Awesome ! Do it, do it ! :smile:

[2021-06-16 09:13:20] coldflake : Will do :slightly_smiling_face:

[2021-07-05 12:59:14] david077 : set the channel topic: NLD: Up | Support: Up | Latest Version: 2.0.2.10

[2021-07-05 14:12:28] pingspike : What’s new?

[2021-07-05 15:06:23] 007 : **Mavic 2 Pro/Zoom 01.00.0770:** FCC Mode fixed Firmware Flashing issue fixed AV reading parameters fixed Speed Mods Fixed **Other:** General UI Bugs fixed NextGen DUML implementation Firmware upload improved UI update after firmware flash fixed

[2021-07-16 15:25:48] fredmicrowave : What would be great too is a way to delete, or at least edit personal info in the drone, (like activation info) for when we want to sell it or for any other reason...

[2021-07-19 05:59:00] coldflake : @fredmicrowave I do not think that there is any information stored on the drone itself? I believe...wirhout having looked into it that the registration info is tied to the FC serial number during the activation process which in turn is stored on a dji server. I have never seen any personal info at least. One could wipe log files and black box files to make it cleaner.

[2021-07-19 12:49:44] fredmicrowave : I though the info transmitted and decoded by DroneID/Aeroscope was stored in the AC, and that included email and some personal info, but I may be wrong @coldflake...

[2021-08-02 02:55:44] droneabc : Ugh. I'm heavy.

[2021-08-02 14:44:53] monkeyman : Thanks @coldflake my MP2ED with .800 firmware DONE with FCC-Boost mode!

[2021-08-02 14:45:19] monkeyman : before and after

[2021-08-02 14:45:49] monkeyman : I’m using smartcontroller

[2021-08-02 14:45:54] monkeyman : tons of thanks!!!

[2021-08-02 14:50:40] coldflake : You are very welcome and thank you very much for your kind help :+1:

[2021-08-14 13:06:46] flymymavic : @coldflake your site has been down all day?

[2021-08-14 14:08:26] coldflake : Yes I know! Replacing network infrastructure.

[2021-08-14 14:09:14] coldflake : Be sure to check nld for the next couple of days BTW hint hint

[2021-08-14 19:04:38] tsun : I'm hoping for alt limit/NFZ removal similar to shown by DH

[2021-08-14 19:08:59] tsun : "coming soon" to NLD for at least a year

[2021-08-14 20:46:44] coldflake : @mrmarecki I were about to start implementing as I got it offered by someone but I did not beleive that it would last. I wouldn't implement something that dji could kill very easily. I still have the contact with the guy so if DH manages to get it working then I will definitely look into it.

[2021-08-16 11:17:56] measo420 : Will you be adding the altitude removal by firmware and root, not a certificate with your core boards soon like you stated last year?

[2021-08-16 12:06:42] coldflake : Cert is better

[2021-08-16 12:11:24] measo420 : But can't the certs be removed by the go 4 app like the people had a problem after they got online with in 1.20 if they get online Can you add something with custom root mod that will make it not removable by any dji trick like a perma cert like perma root

[2021-08-16 12:11:42] coldflake : cert can be perm yes

[2021-08-16 12:12:38] coldflake : We also have another option for alt removal but the drone can only ascend 0.5 M/sec

[2021-08-16 12:13:08] coldflake : That method has nothing to do with cert and will always work on the core boards

[2021-08-16 12:13:09] measo420 : Cool beans

[2021-08-16 12:13:29] coldflake : Certs for now will just make a lot more people happy in one go

[2021-08-16 12:13:57] coldflake : So when certs get busted, the other option will be used

[2021-08-16 12:29:23] measo420 : I hope that altitude can be removed with rooted boards permanently without risks of removal sometime soon

[2021-08-16 12:48:02] dkovar : Stan, nice change of name. Cut it out or I'll kick you.

[2021-08-16 12:52:08] fstan1855 : post deleted.

[2021-08-16 12:52:36] dkovar : Thank you.

[2021-08-16 12:58:59] measo420 : Its just frustration I actually bought a NLD board last year and have been waiting patiently I hope they can some add a method like this to custom firmware or root to make it not removable by DJI no matter what they try I had hoped having rooted board would give better advantage

[2021-08-16 13:02:06] coldflake : It removes NFZ and with serial number 000000000 you can not be identified. It also does not require activation which means that it will not be linked to your DJI account. What was said was that if it would be possible to do it (at the time) it would be with root which were only possible (also at the time) with the rooted core boards. You should not have bought it of hopes for something to come when it were not promised to be released at xx.xx.xxxx date.

[2021-08-16 13:09:50] measo420 : I emailed support and asked before I pre ordered last sept I was told said yes alt will be removed but it just needed a custom FC which was being worked on and be out soon got board and waiting I still have email saying it would though

[2021-08-16 14:55:28] coldflake : Can you please send that email back to support because I would like to ask the person sending it out to you why he said so.

[2021-08-16 14:58:15] coldflake : I have told support that if we were going to remove altitude we would most likely need root. And at the time we could only make root on 100 firmware but as the core boards are permanently rooted, there would be an option. We have also looked into custom FC but it were not doable at the time as we did not have the keys. A lot of things have changed since a year ago but if you were PROMISED then it was not ok. You are welcome to send it back and get a refund if you feel that you bought something under false pretences.

[2021-08-16 15:30:43] measo420 : What is blocking.asp [buttrocket.nolimitdronez.info](http://buttrocket.nolimitdronez.info)?

[2021-08-16 15:31:44] measo420 : Because I feel like I bought a lifetime of updates and I feel you didn't honor your word

[2021-08-16 15:33:16] measo420 : So refund me, or unblock me

[2021-08-16 15:33:35] measo420 : I would unblock me if I were you, but that's just me....

[2021-08-16 15:38:34] measo420 : I'll give you 3 hours and I won't be emailing support I'm telling you here

[2021-08-16 16:18:44] measo420 : Who would make a update program that deletes itself, make a 2kb file with w3.comcom/1995/ and then makes another file "nld.exe" a 1kb with" blocking.asp [buttrocket.nolimitdronez.info](http://buttrocket.nolimitdronez.info)"

[2021-08-16 16:51:01] coldflake : What????

[2021-08-16 16:51:18] coldflake : [nolimitdronez.info](http://nolimitdronez.info) is not blocked from our end, that is for sure

[2021-08-16 16:51:30] coldflake : Are you inside mainland china?

[2021-08-16 16:53:34] coldflake : I will bet that you are inside mainland china

[2021-08-16 16:54:03] coldflake : That sounds like DNS poisoning to me

[2021-08-16 16:54:36] coldflake : We have had some users from China complaining that they could not use the app but it has been almost impossible to investigate it

[2021-08-16 16:56:09] coldflake : <http://www.chinafirewalltest.com/?siteurl=nolimitdronez.info>

[2021-08-16 16:56:18] coldflake : This one always turn out positive

[2021-08-16 16:56:45] coldflake : From what you write it sounds like it is not hitting [nolimitdronez.info](http://nolimitdronez.info) but some Chinese government blocking website

[2021-08-16 16:57:14] coldflake : Can you open this url: <https://buttrocket.nolimitdronez.info/update.json>

[2021-08-16 17:08:12] coldflake : Ok I figured it out, there was a config error in our CloudFront distribution, please try again

[2021-08-16 17:08:22] coldflake : <http://buttrocket.nolimitdronez.info/update.json>

[2021-08-16 17:08:31] coldflake : Should give you this:

[2021-08-16 17:08:43] coldflake :

[2021-08-16 17:12:12] coldflake : ~nld Anyone from China, please check that the app still opens correctly, thanks

[2021-08-16 17:15:20] coldflake : if your NLD app got messed up, then download a new one from <https://nolimitdronez.info> or <https://nolimitdronez.com>

[2021-08-16 17:16:28] coldflake : Sorry for the fuckup everyone!

[2021-09-01 20:11:56] dnacho : What's the boot secuence to fly in a nfz

[2021-09-01 20:13:59] dnacho : It's showing in nfz

[2021-09-01 20:14:06] fredmicrowave : Drone, then remote, then phone.

[2021-09-01 20:14:35] fredmicrowave : But drone first is the most important, until white led flashes 4 times.

[2021-09-01 20:16:42] dnacho : It still shows in nfz after that

[2021-09-01 20:18:55] dnacho : The white lights right?

[2021-09-01 21:11:52] fredmicrowave : White led flashing means NLD is active

[2021-09-01 21:59:45] dnacho : I did not flash(I have not updated anything) so I tried re doing the remove nfz in nld mod client but its failing

[2021-09-01 21:59:58] dnacho :

[2021-09-01 23:28:12] coldflake : Just turn off the bird, fire it up and try again

[2021-09-02 00:02:21] dnacho : Should the phone have internet? And do I use the stock dji to 4 app?

[2021-09-02 00:03:23] dnacho : Thanks, it ended working with another pc Do I leave the phone with internet? And use the stock dji go 4 app?

[2021-09-02 00:16:27] fredmicrowave : Avoid internet if you can, it is always safer. You don´t need it except if you really want to use maps...

[2021-09-02 00:16:49] fredmicrowave : Airplane mode ftw

[2021-09-18 07:18:11] flyhigh213 : Has NLD had any updates in a year? What ever happened to the "outlined what needs to be done with firmware" and tom and the freelance hackers?

[2021-09-20 11:21:23] tommiboost : Had high expectations for nld but they never deliver always coming soon

[2021-10-25 19:23:21] divergente.x : i some can share a lasted copy of NLD GO

[2021-10-25 19:23:28] divergente.x : plz i needed

[2021-10-25 19:24:11] divergente.x : my copy is unstable and exit of my android when enter camera mode

[2021-10-26 08:00:44] mefisto : Sounds like battery problem rather than software.

[2021-10-28 18:09:42] pixel : pixel joined the channel.

[2021-10-28 22:27:09] doctor : doctor joined the channel.

[2021-10-29 00:30:01] stanlee : stanlee joined the channel.

[2021-10-29 16:56:18] dronedavid : dronedavid joined the channel.

[2021-10-30 12:14:25] jj : madmaqx joined the channel.

[2021-10-31 00:23:18] will : will joined the channel.

[2021-11-02 07:31:31] fly2high213 : fly2high213 joined the channel.

[2021-11-02 08:26:21] fly2high213 : Can you add option to not send the remote controls GPS location while flying so it won't show up on aeroscope?

[2021-11-02 12:16:28] masskrug : starka joined the channel.

[2021-11-03 16:04:16] deesparkom2 : deesparkom2 joined the channel.

[2021-11-03 21:47:13] whydji : whydji joined the channel.

[2021-11-05 10:10:25] yumu : yumu joined the channel.

[2021-11-12 10:45:10] cs2000 : cs2000 joined the channel.

[2021-11-12 10:45:16] cs2000 : dji-rev-bot added to the channel by cs2000.

[2021-11-13 23:33:46] cat.db : no news ？

[2021-11-14 09:27:13] coldflake : A quick little update to all NLD family members. I've been absent for a while, due to outside non tech matters that demanded my attention. Apologies for my absence. I'm back on-deck, and working through some outstanding fixes, and other enhancements planned for the future.

[2021-11-14 09:27:21] coldflake : @flyhigh213 - We have the option to provide privacy for Aeroscope on our backlog - but there are other priorities ahead of it... but thanks for the feedback.

[2021-11-14 15:09:43] fredmicrowave : Glad to see you´re back . Aeroscope tweak would be an unique and awesome feature

[2021-11-21 21:48:35] lazypilot : lazypilot joined the channel.

[2021-12-04 23:10:30] aol : aol joined the channel.

[2021-12-10 13:26:58] mavic2pro666 : xiamen66 joined the channel.

[2021-12-14 16:28:31] feckless : feckless joined the channel.

[2021-12-22 12:47:18] cantrepeat : did the forums on NLD get taken down?

[2021-12-22 13:44:50] pingspike : long time ago now…

[2021-12-22 13:45:03] pingspike : all your guides are gone ?

[2021-12-23 00:27:22] coldflake : @pingspike, they are being remade up to date in a wiki format

[2021-12-23 00:27:48] coldflake : http://wiki.nolimitdronez.com/documentation/start

[2021-12-23 00:28:07] coldflake : Check it out and let me know what you guys think

[2021-12-23 00:28:27] coldflake : Any input will be greatly appreciated

[2021-12-23 00:29:00] coldflake : We have been quiet for some time but support for all current drones are coming up.

[2021-12-23 00:29:00] coldflake : We have been quite for some time but support for all current drones are coming up.

[2021-12-23 00:30:05] coldflake : We have been cooking for a long time letting others draw attention for a while...we have an awesome surprise for everyone..literally lol

[2021-12-23 11:53:31] aol : @coldflake Will core boards ship before Christmas? Still trying to get one for my daughter.

[2021-12-23 11:53:31] aol : @coldflake Will core boards ship before Christmas?

[2021-12-23 11:53:31] aol : Will core boards ship before Christmas?

[2021-12-23 11:53:31] aol : @coldflake Will core boards ship before Christmas? I am still trying to get one for my daughter and it would be a good surprise for her.

[2021-12-23 20:16:57] 007 : Looks great but messing with it does not seem simple, P4P

[2021-12-24 08:17:14] aol : I'm confused, are core boards in stock or your waiting on them?

[2021-12-26 13:19:32] coldflake : We are waiting for for them, they will be back in stock first week of January

[2021-12-26 13:20:09] coldflake : @007 What do you mean? I do not understand.

[2021-12-26 13:21:48] 007 : Hi How to make it on my P4P

[2021-12-26 13:24:40] coldflake : Ahh yes, we have a fix for that too

[2021-12-26 13:24:58] coldflake : And update will be rolled out soon targeting other issues as well

[2021-12-31 19:55:15] acowherd : acowherd joined the channel.

[2022-01-01 23:52:45] rameezahmed1998 : Getting issue in mavic mini to downgrade

[2022-01-06 00:53:20] jezzab : jezzab joined the channel.

[2022-01-06 00:53:59] jezzab : @jezzab left the channel.

[2022-01-08 22:01:32] lurker : lurker joined the channel.

[2022-01-18 00:49:47] il1oo0 : il1oo0 joined the channel.

[2022-01-26 17:48:43] cds : cds joined the channel.

[2022-02-06 05:11:00] frk : frk joined the channel.

[2022-02-26 22:32:50] konraditurbe : konraditurbe joined the channel.

[2022-03-03 15:12:13] gh : ghartabc joined the channel.

[2022-03-05 01:44:36] tim : tim joined the channel.

[2022-03-09 20:21:19] coldflake : BTW, I forgot to announce it here but we have now launched a discord server. Discord is a cool way to communicate, check it out. Just go to https://nolimitdronez.com and join from the discord box on the main page :)

[2022-03-09 20:23:09] coldflake : @channel BTW, I forgot to announce it here but we have now launched a discord server. Discord is a cool way to communicate, check it out. Just go to https://nolimitdronez.com and join from the discord box on the main page :)

[2022-03-09 20:23:36] coldflake : @everyone BTW, I forgot to announce it here but we have now launched a discord server. Discord is a cool way to communicate, check it out. Just go to https://nolimitdronez.com and join from the discord box on the main page :)

[2022-03-09 20:24:12] coldflake : @all BTW, I forgot to announce it here but we have now launched a discord server. Discord is a cool way to communicate, check it out. Just go to https://nolimitdronez.com and join from the discord box on the main page :)

[2022-03-25 13:41:02] 007 : Phantom 4 pro (V1)- boost kit someone know where to solder the wires, black and red on the card ? It's not the same on the V2

[2022-03-25 13:41:56] 007 :

[2022-03-30 07:40:44] il1oo0 : Which NLD's friend sells the mavic 2 factory core board?Whether it can solve the problem of not being able to take off in other countries ？

[2022-03-30 09:54:41] pingspike : tagging @coldflake

[2022-03-30 10:06:52] coldflake : Thanks @pingspike

[2022-03-30 11:22:09] windoze : windoze joined the channel.

[2022-03-31 19:27:06] windoze : I have a question about the NLD core board and the flying in stealth from areoscope, are the boards able to at minimum not show pilot location, or send a fake location. is completely turning droneID off, or send blank/fake data possible?

[2022-04-01 06:17:13] coldflake : It is just turned off completely

[2022-04-01 10:42:23] windoze : Thank you

[2022-04-01 18:46:38] stanlee : Got like 6 of the same emails from NLD today. ?

[2022-04-01 21:50:22] stanlee : Make it 8.

[2022-04-04 07:07:19] coldflake : @stanlee So sorry! Our mailing system went come completely haywire! The damn thing apparently crashed silently and spawned multiple threads. That will not happen again!

[2022-04-06 17:09:07] ttdqj4wj3hgcy5zg85qi : ttdqj4wj3hgcy5zg85qi joined the channel.

[2022-04-09 23:46:50] barrycarlton : barrycarlton joined the channel.

[2022-04-09 23:47:14] barrycarlton : I have 2 questions.... How do I decipher the parameter codes??? Some are obvious but most are. as they say, "Greek" to me. 2nd...Where can I find the stock parameters settings to compare with the new board? It seems to fly like it's on mild steroids compared to my other M2P.

[2022-04-10 01:43:23] papareproductora : papareproductora joined the channel.

[2022-04-10 05:21:32] mavic2reverser : mavic2reverser joined the channel.

[2022-04-10 08:14:03] sample : sample joined the channel.

[2022-04-10 14:14:45] flyte9 : flyte9 joined the channel.

[2022-04-10 17:44:40] priegor : priegor joined the channel.

[2022-04-10 20:02:58] sambuko : alximiktik joined the channel.

[2022-04-10 22:03:27] windoze : Dji assistant? / reset?

[2022-04-10 22:03:27] windoze : Dji assistant? / reset? I know it'll do 100% stock settings, NLD client may stock reset can't remember. Used board?

[2022-04-10 22:03:27] windoze : Dji assistant? / reset? I know it'll do 100% stock settings, NLD client may stock reset can't remember.

[2022-04-11 01:01:36] barrycarlton : New core board. Maybe I’m just used to my own settings on my other machines. still need a way to translate the parameter abbreviations

[2022-04-11 10:25:24] windoze : Did you try NLD client? it may have a reset. If they aren't normal you may have a used board on your hands. Did you look at values to see if they are higher than normal default settings? whats too fast normal or sport modem?

[2022-04-11 10:25:24] windoze : Did you try NLD client? it may have a reset. If they aren't normal you may have a used board on your hands. Did you look at values to see if they are higher than normal default settings? whats too fast normal or sport mode?

[2022-04-12 07:32:30] eingin : eingin joined the channel.

[2022-04-14 17:53:33] dronepilot : Any way to downgrade firmware on N1-RC?

[2022-04-18 00:32:11] lmore377 : lmore377 joined the channel.

[2022-05-22 09:42:03] jack117wb : jack117wb joined the channel.

[2022-05-23 20:47:29] jjbyrnes29 : jjbyrnes29 joined the channel.

[2022-06-27 01:16:48] airsheen : airsheen joined the channel.

[2022-11-10 03:48:43] areoc : areoc joined the channel.

[2022-11-25 15:46:42] pingspike : tango down @coldflake

[2022-11-25 17:11:41] coldflake : Crap! Thanks for letting me know mate!

[2022-11-25 17:12:44] coldflake : Are you up for testing the new release BTW?

[2022-11-25 17:13:31] coldflake : Flysafe unlock certificates that persists over firmware upgrade. Downgrade, install cert upgrade to latest and be forever happy :)

[2022-12-05 01:33:52] zy1004 : zy1004 joined the channel.

[2022-12-09 15:52:49] ivar : ivar joined the channel.

[2022-12-11 01:07:59] efwefaf : efwefaf joined the channel.

[2022-12-15 14:28:13] crashing_bird : crashing_bird joined the channel.

[2022-12-29 19:16:25] loaderbull : Is there any support for latest Air2S firmware and FCC/NFZ or is it for fw 2040 only?

[2022-12-30 08:33:21] coldflake : There might be an issue with latest firmware as we know dji have patched the unlock license. However, our unlock certificate has been successfully installed on firmware that are supposedly patched. For the Air2s I beleive it works on most firmware but probably not the latest

[2022-12-30 12:37:42] loaderbull : Nice! What about FCC or is that impossible past 2040?

[2022-12-31 16:07:28] tommiboost : Anything for mini 3 pro rc yet

[2023-01-03 02:40:21] leo : leo joined the channel.

[2023-01-03 04:19:56] seraph1573 : seraph1573 joined the channel.

[2023-01-04 06:10:09] kaleongo : kaleongo joined the channel.

[2023-01-14 11:45:35] efwefaf : Is there any progress in the national unlock certificate

[2023-01-19 04:33:40] zy1004 : Can Avata access the no-fly zone?

[2023-02-21 18:55:55] flymymavic : @coldflake hey bud why is NLD getting flagged as a virus?

[2023-02-28 01:29:58] jackma : jackma joined the channel.

[2023-03-05 12:29:12] efwefaf : Can anyone use this to unlock the DJI T40 battery and modify the number of cycles

[2023-03-13 07:45:39] coldflake : @flymymavic Hi mate, just saw your message! Yes, what a shit show but something good came out of it though. Now NLD does not do anything nasty OS wise in order to do what it does, for example it does not require to be run as admin anymore. Finally it has all been put into a smooth MSI installer package and all executable files from our side is now also code signed. BOOM! :)

[2023-03-13 14:48:18] loaderbull : @coldflake can you confirm latest Air 2S firmware to work with cert plz? Im on 2040 but notice others may work? I'd like to go as high as possible with FCC and cert, any update on this? I fly with RC Pro which is itself modded to FCC but obviously upgrading drone firmware can knock my cert hack out of order. Advice bud?

[2023-03-13 15:56:56] nz-maori : @loaderbull did you have any probs with the maps on rc pro? I m on .600 and fly 1.5.10 ( for RID purposes) and have only a blank map. When upgrading to .1200 map is visible

[2023-03-13 15:56:56] nz-maori : @loaderbull did you have any props with the maps on rc pro? I m on .600 and fly 1.5.10 ( for RID purposes) and have only a blank map. When upgrading to .1200 map is visible

[2023-03-13 16:01:50] loaderbull : Im on latest fw on RC Pro, no issues with maps and FCC hack no mate

[2023-03-13 17:49:59] flymymavic : Thanks for the reply buddy, I will take a look at the new version this week, I need to do some updates to the guides I did a long time back

[2023-03-15 18:09:32] flymymavic : @coldflake ya really could have done with the installer adding a shortcut to the desktop bud, for the novice PC users

[2023-03-15 20:08:06] coldflake : @flymymavic Good point, included in the next update!

[2023-03-19 19:56:37] loaderbull : Does anyone here know about latest firmware for Air 2S? Im on 2040 and would like to upgrade as high as possible and still keep FCC and altitude limit removal, cheers!

[2023-03-19 21:03:01] coldflake : If you can wait until mid next week, we should be able to release an upgrade version of our unlock certificate. We are not sure yet if we can make it work on latest but we can at least promise that red nfz will be supported.

[2023-03-23 18:03:00] dronez4u : dronez4u joined the channel.

[2023-04-08 06:14:26] gudvin : gudvin joined the channel.

[2023-04-13 02:58:51] retrocall : retrocall joined the channel.

[2023-04-22 12:53:13] k_k : kulkraus joined the channel.

[2023-05-19 23:54:45] joelg : joelg joined the channel.

[2023-05-26 08:07:36] williamb2023 : williamb2023 joined the channel.

[2023-05-27 11:51:46] speatuk : speatuk joined the channel.

[2023-05-29 03:41:11] shinoby : shinoby joined the channel.

[2023-05-29 09:54:33] coldflake : Everyone who has an interest in NLD should join our Discord server. Here is an open invite: https://discord.com/invite/vcvehDK9fn?utm_source=Discord%20Widget&utm_medium=Connect

[2023-05-29 09:56:04] coldflake : @channel Everyone who has an interest in NLD should join our Discord server. Here is an open invite: https://discord.com/invite/vcvehDK9fn?utm_source=Discord%20Widget&utm_medium=Connect

[2023-05-29 23:54:43] hito_no_yume : hito_no_yume joined the channel.

[2023-06-01 20:22:42] fedosgad : fedosgad joined the channel.

[2023-06-11 01:13:52] milenovic : milenovic joined the channel.

[2023-07-03 19:56:53] harryemery92 : harryemery92 joined the channel.

[2023-07-21 23:20:46] tmbinc : tmbinc joined the channel.

[2023-08-18 21:32:33] revnmavic : revnmavic joined the channel.

[2023-09-13 10:14:58] molda : molda joined the channel.

[2023-10-03 14:09:07] nicksapienza : nicksapienza joined the channel.

[2023-10-15 20:50:17] dumldore_newbi : dumldore_newbi joined the channel.

[2023-10-24 17:35:30] caseygibson : caseygibson joined the channel.

[2023-10-27 05:30:49] nmikus : nmikus joined the channel.

[2023-10-27 15:35:42] uskve : uskve joined the channel.

[2023-10-27 18:49:58] mgracio : mgracio joined the channel.

[2023-10-28 06:30:32] enigma2 : enigma2 joined the channel.

[2023-11-01 19:53:52] coertmans : coertmans joined the channel.

[2023-11-02 06:59:40] dronedog : dronedog joined the channel.

[2023-11-21 06:42:43] yongyilao : yongyilao joined the channel.

[2023-11-22 10:58:50] tnostvik : tnostvik joined the channel.

[2023-11-29 10:04:29] yongyilao : nid不可以刷新大家mini3这个机型吗伙伴们

[2023-11-29 10:19:11] yongyilao : nld不可以刷写大疆mini3这个机型吗伙伴们

[2023-12-09 00:58:15] deonisray : deonisray joined the channel.

[2023-12-30 23:53:26] coldflake : @channel New members here is suggested to join the NLD discord sever, that is where all the fun is. I don't use mattermost really as this community has been deceased for years. There is an open invite on nolimitdronez.com, see ya there!

[2023-12-30 23:53:26] coldflake : @channel New members here are suggested to join the NLD discord sever, that is where all the fun is. I don't use mattermost really as this community has been deceased for years. There is an open invite on nolimitdronez.com, see ya there!

[2023-12-30 23:53:26] coldflake : @channel New members here is suggested to join the NLD discord sever, that is where all the fun it. I don't use mattermost really as this community has been deceased for years. There is an open invite on nolimitdronez.com, see ya there!

[2023-12-31 17:24:55] uskve : "this community has been deceased for years" - interesting assesment

[2024-01-02 17:46:19] dkovar : I think he may have meant "This NLD community..." rather than "The DJI community on Mattermost" in general, but I wondered when I read it.

[2024-01-13 02:48:46] dronepilot : @dronepilot left the channel.

[2024-01-24 05:39:05] efwefaf : Does anyone need the US version of DJI T30 T40

[2024-02-06 19:56:53] ryantkasher : ryantkasher joined the channel.

[2024-02-10 03:22:28] accountfrompl : accountfrompl joined the channel.

[2024-02-12 20:44:52] lining-preps.0u : lining-preps.0u joined the channel.

[2024-02-13 08:25:46] xpk : xpk joined the channel.

[2024-02-14 16:35:33] otter : otter joined the channel.

[2024-04-05 15:55:20] monkeyman : I got a video proved that avata has been unlocked recently, likely using different firmware between drone and googles

[2024-04-30 16:37:20] cakenes : cakenes joined the channel.

[2024-05-10 08:21:30] dreamtree : dreamtree joined the channel.

[2024-05-15 00:29:39] ld50 : ld50 joined the channel.

[2024-05-21 07:01:39] wag-on : wag-on joined the channel.

[2024-06-22 23:06:03] phantom4pro.v2.0 : phantom4pro.v2.0 joined the channel.

[2024-07-01 17:30:19] mrsmith : mrsmith joined the channel.

[2024-07-05 11:16:52] yongyilao : If you have the calibration errors 40011 and 10016 of air3 and mini4pro, you can ask me and I can help.

[2024-07-05 20:10:46] coldflake : Fuck off Chinese scammers

[2024-07-26 15:53:46] ogini_ayotanom : ogini_ayotanom joined the channel.

[2024-07-26 16:04:04] theguac : theguac joined the channel.

[2024-08-14 12:48:02] symza : symza joined the channel.

[2024-08-21 20:18:25] alt.nq-5711k93 : alt.nq-5711k93 joined the channel.

[2024-08-22 14:38:57] swaggyc : swaggyc joined the channel.

[2024-10-07 18:42:29] tokertm : tokertm joined the channel.

[2024-11-26 17:00:47] ox3d : ox3d joined the channel.

DJI-Rev Mattermost Archive

Messages in nld

DJI-Rev Mattermost Archive

Messages in nld

User Info