Messages in spoon-feeding
[2017-07-21 04:08:52]
hostile :
@hostile has joined the channel
[2017-07-21 04:08:52]
hostile :
set the channel description: derp derp
[2017-07-21 04:10:13]
avg.bob :
@avg.bob has joined the channel
[2017-07-21 04:13:39]
hostile :
@hostile has joined the channel
[2017-07-21 04:13:44]
hostile :
<https://www.teamviewer.com/en/download/>
[2017-07-21 05:05:13]
timmytron :
@timmytron has joined the channel
[2017-07-21 05:05:21]
timmytron :
Classic, love the name of this room
[2017-07-21 05:05:59]
timmytron :
set the channel description: Help, I need an adult to move my mouse and keyboard on my behalf. Herp de-derp.
[2017-07-21 08:04:55]
ender :
@ender has joined the channel
[2017-07-21 08:05:21]
ender :
gotta join because of the name, but maybe i can help ppl…
[2017-07-21 11:24:22]
goof :
@goof has joined the channel
[2017-07-21 12:19:51]
kilrah :
@kilrah has joined the channel
[2017-07-21 21:22:16]
ender :
Damn, anyone here, i need to have a spoonful :slightly_smiling_face:
[2017-07-21 21:23:23]
ender :
tried to dload flightlog data from my sparky via Assistant, so i tapped on “Flight logs” it told my something about to press an SD Card icon but there was non, also DCIM sdcard was still mounted, is it me or is there something wrong ?!
[2017-07-21 21:37:23]
guest :
@guest has joined the channel
[2017-07-21 21:38:45]
guest :
needed to join to see how people are spoon fed :slightly_smiling_face:
[2017-07-21 21:39:16]
ender :
dont mess with the babies :slightly_smiling_face:
[2017-07-21 21:39:45]
guest :
:scream:
[2017-07-21 21:40:23]
guest :
<https://www.youtube.com/watch?v=U3MSk6_ZoO0>
[2017-07-21 21:41:52]
ender :
bwuaaaaaaahhhhhhh !
[2017-07-21 21:44:37]
kilrah :
ROFL
[2017-07-21 21:50:03]
ender :
Needing spoon feed here again in case you missed it:
[2017-07-21 21:50:03]
ender :
tried to dload flightlog data from my sparky via Assistant, so i tapped on “Flight logs” it told my something about to press an SD Card icon but there was non, also DCIM sdcard was still mounted, is it me or is there something wrong ?!
[2017-07-21 21:50:19]
ender :
i did a looong flight and can find no flightlog… Damn…
[2017-07-21 21:53:17]
kilrah :
well i know how it works on mavic, but not on spark
[2017-07-21 21:53:45]
kilrah :
do you get the camera's sd card in normal times when usb connected?
[2017-07-21 21:56:51]
ender :
yes
[2017-07-21 21:57:05]
ender :
it also contains flight log folder but empty.
[2017-07-21 21:57:18]
ender :
maybe thats a real problem and not just stupidity…
[2017-07-21 21:57:34]
ender :
i guess Sparky has no separate “glued” sdcard for that stuff
[2017-07-21 21:57:42]
kilrah :
maybe.... ok on mavic you EITHER get the camera SD card, OR the flight log drive
[2017-07-21 21:57:50]
ender :
but all on one so the DJIA2 function does nothing
[2017-07-21 21:58:04]
ender :
could be
[2017-07-21 21:58:09]
kilrah :
anyway, you're rooted no? can probably get the logs from /blackbox...
[2017-07-21 21:58:38]
ender :
yes, but guess what,its empty.
[2017-07-21 21:58:50]
ender :
That was my first approach, i shun DJIA2 as much as i can.
[2017-07-21 21:59:20]
kilrah :
welp... maybe the sparky doesn't log squat? would be surprising... nothing on mobile device?
[2017-07-21 21:59:25]
ender :
i deleted the movie mp4, i cant believe flight logs are then synchronized, would not make sense.
[2017-07-21 21:59:52]
ender :
I recall someone complaining about getting no flight logs nowadays on spark… hmmm
[2017-07-21 21:59:57]
ender :
maybe someing deeper
[2017-07-21 22:00:03]
ender :
OR just dji bug in .300
[2017-07-21 22:00:12]
ender :
Its …. TODAY :slightly_smiling_face:
[2017-07-22 00:12:15]
skywalk3r :
@skywalk3r has joined the channel
[2017-07-22 02:44:36]
caffeine :
@caffeine has joined the channel
[2017-07-22 03:15:28]
vab53 :
@vab53 has joined the channel
[2017-07-22 03:42:37]
jcarlo :
@jcarlo has joined the channel
[2017-07-22 03:42:47]
jcarlo :
Spoon feeding yeeeeaaaaah
[2017-07-22 03:43:10]
jcarlo :
@hostile are you here
[2017-07-22 03:49:00]
jcarlo :
How do you turn on the Mavic?
[2017-07-22 05:20:57]
hotelzululima :
@hotelzululima has joined the channel
[2017-07-22 05:21:24]
hotelzululima :
LMAO….
[2017-07-22 08:01:17]
ender :
jcarlo: -1- earn the money -2- buy it -3- turn the friggin thang ON :stuck_out_tongue:
[2017-07-22 09:57:28]
exculpo :
@exculpo has joined the channel
[2017-07-22 12:15:29]
fabbari :
@fabbari has joined the channel
[2017-07-22 23:05:03]
dpitman :
@dpitman has joined the channel
[2017-07-23 03:16:38]
robbyg :
@robbyg has joined the channel
[2017-07-23 03:19:09]
robbyg :
The Bin files that are created by Dumldor, I assume they contain the decrypted SIG files of the normal firmware? Is there an easy way in windows to see and extract the Bin File?
[2017-07-23 05:26:53]
goof :
use 7-zip or whatever other archiver you use
right click -> open archive
[2017-07-23 05:27:08]
goof :
it's full of the .sig files for the individual modules
[2017-07-23 05:27:20]
goof :
@robbyg
[2017-07-23 05:28:11]
robbyg :
Thanks. I have 7-zip. I never knew it was that easy.
[2017-07-23 05:28:37]
goof :
if in doubt, try opening a file as archive
[2017-07-23 05:28:46]
goof :
or binwalk it
[2017-07-23 05:29:13]
goof :
offzip is another one
[2017-07-23 05:37:20]
robbyg :
just tried 7-zip and it worked perfectly. Thanks
[2017-07-23 07:57:47]
rulppa :
@rulppa has joined the channel
[2017-07-23 14:51:54]
nocommie :
@nocommie has joined the channel
[2017-07-24 05:49:16]
ragnar7 :
@ragnar7 has joined the channel
[2017-07-24 08:28:54]
f3l1x :
@f3l1x has joined the channel
[2017-07-24 09:17:44]
bradleyds2 :
@bradleyds2 has joined the channel
[2017-08-01 15:08:13]
wigo :
Hello,
I hope I can ask my question here :
I'm with the dji assistant 2 software preference for a matrice 100 (but I think it's the same stuff than for the mavic) and I would like to take-off while there is the "interference magnetic field" warning, and without the GPS, thank you verry much
[2017-08-02 17:57:44]
bradleyds2 :
Hi, sorry, I know it isn't the answer you're after, but I'd strongly recommend not flying with magnetic interference, as during a recent event when my drone went haywire, it appears it was likely caused by magnetic interference (although I have no idea where from). Here's a link to a video of what happened <https://youtu.be/u705Lx6WCZU>
If you're already aware of the possible issues, I'm sorry for wasting your time, as I cannot help you, but hopefully someone else here can.
Good luck, and safe flying!
[2017-08-02 18:29:44]
triangular :
There is a configuration involving parameter edits floating around that allow you to put true manual mode (like acro) on sport mode (replacing sport mode for manual, so giving it up). It sounds like that is basically what youre asking to do.
[2017-08-02 18:32:41]
triangular :
I am not sure but, if it is truly in manual mode then maybe magnetic interference does not really matter, since there is no automatic leveling or anything being controlled by the compass or accelerometer. But you better be at least used to flying fpv style acro racing drones before doing that with a mavic or phantom. At least you could flip it between full manual and P/GPS, if you got into any trouble.
[2017-08-02 18:35:14]
kilrah :
ATTI is good enough without compass
[2017-08-04 00:08:02]
rdm :
For anyone new who does the parameter mods, I highly recommend against changing the braking speed in sport mode if you are using sport+, you'll be used to the regular speed of the brake and will most likely slam into something inadvertently
[2017-08-04 00:08:28]
rdm :
So if you do, be damn careful and re-learn everything you thought you knew.
[2017-08-04 00:09:18]
czokie :
<http://dji.retroroms.info/howto/parameterhacks>
[2017-08-04 00:09:32]
czokie :
New page - Love you to contribute there - add some content and some warnings
[2017-08-04 00:10:46]
rdm :
Kk I'll help with that when I get to my computer, I've been fiddling with settings, and doing the brake parameter with the lower altitude parameter.... You need a good 15 feet above the ground to slow down in time to not absolutely smash your drone. It drops like a brick.
[2017-08-04 00:11:14]
rdm :
I'm damn lucky I was just testing when I did it, or my drone would look like a pile of legos.
[2017-08-04 21:14:16]
rdm :
@czokie updated the parameter's with better descriptions and such.
[2017-08-04 21:29:51]
czokie :
Thanks.
[2017-08-04 21:30:00]
czokie :
Question: Max altitude does not support DJI P4 Pro ... is that for all versions, or just latest?
[2017-08-04 21:32:00]
rdm :
no idea, someone else edited that
[2017-08-04 21:32:05]
rdm :
I have a mavic so cant test
[2017-08-04 21:32:43]
rdm :
@czokie
[2017-08-04 21:33:31]
rdm :
also had to do the description with a code tag, the wiki was acting up with the nowiki tag and the %% tag on it for some reason
[2017-08-04 21:33:49]
rdm :
took me a bit just to give up and run it in a code tag
[2017-08-04 21:35:03]
czokie :
What was wrong with the original wiki formatting?
[2017-08-04 21:35:14]
rdm :
well in the - lines
[2017-08-04 21:35:26]
rdm :
the //'s wouldnt stick without causing it to be italic
[2017-08-04 21:35:36]
rdm :
so i just slapped in <code>
[2017-08-04 21:35:47]
czokie :
ah. OK.
[2017-08-04 21:36:03]
rdm :
the information however is there, so if someone else wants to clean it up who knows wiki formatting better than I do, be my guest
[2017-08-04 21:36:25]
czokie :
I will look at some alternate formatting - in the meantime - feel free to join ~dji_retroroms_wiki if you'd like to contribute further
[2017-08-04 21:36:35]
kilrah :
coptersafe do sell the 500m mod for p4p
[2017-08-04 21:37:19]
rdm :
yeah but im not going to advertise for coptersafe in the wiki, at some point someone with that drone will figure it out and slap it in there
[2017-08-04 21:37:34]
kilrah :
no but if they do then it must work at least on some versions.
[2017-08-04 21:37:48]
rdm :
again, I didn't put that into the wiki
[2017-08-04 21:37:50]
kilrah :
maybe not the latedt but the one before certainly
[2017-08-04 21:38:00]
rdm :
Im just not removing it because I am not sure if it is correct or not
[2017-08-04 21:38:34]
rdm :
better safe than sorry and all that
[2017-08-04 21:43:10]
kilrah :
i'd rather put a table with parameters and descriptions and what aircraft/version they apply to instead of those stupid "pre baked" changesets
[2017-08-04 21:43:29]
kilrah :
might do another page
[2017-08-04 21:43:58]
rdm :
im going to be editing the page
[2017-08-04 21:44:01]
rdm :
with all of that
[2017-08-04 21:44:04]
kilrah :
or jsut at the bottom "some combinations some users use" because really some stuff there can't be recommended
[2017-08-04 21:44:12]
rdm :
there are already 3 parameter hacks pages
[2017-08-04 21:44:18]
rdm :
which will confuse the hell out of people
[2017-08-04 21:45:02]
rdm :
unfortunately @czokie is editing it now, so im editing it in notepad++ while he does what he does
[2017-08-04 21:46:20]
rdm :
im adding a drone specific section below the rest
[2017-08-04 21:46:42]
rdm :
if its in the regular parameters it should be pretty much automatically considered as "works on everything"
[2017-09-02 20:10:06]
czokie :
I am not editing it at the moment - there should be no locks.
[2017-09-02 20:12:17]
czokie :
but that was ages ago :slightly_smiling_face:
[2017-09-02 20:12:25]
czokie :
Just saw it referenced in another group
[2017-09-04 02:21:17]
timwatkins :
Hello all. Made a mistake by posting in general my question.
My spark rc does not broadcast its wifi. I have 8 devices that will not detect it. The new firmware borked a new remote and not I get nothing but red flashing lights. It worked great for a few hours until I decided to update like a dummy. Is there anyway to connect to the sparks remote without wifi or force the wifi to show so I can fix this. Dji has offered a shipping label to replace their screw up.
[2017-09-04 05:45:00]
bin4ry :
Let them replace it. I don't know of a way to connect to it without wifi.
[2017-09-04 16:51:59]
timwatkins :
What’s the button combo to do a full hard reset of the sparks rc. Or factory restore
[2017-09-04 17:12:21]
kilrah :
There isn't one that we know of
[2017-09-04 17:13:06]
kilrah :
As far as we know the spark RC is read only in every way. No settings stored on it, so nothing to restore or reset.
[2017-09-04 17:13:10]
kilrah :
just send it already
[2017-09-04 17:48:55]
bin4ry :
that is not entirely true. The SparkRC does save the countrycode. You can see it in a file on the ftp (i have forgot which one), but that is ofc no of any help here, since here the flash is failed you will not have any access to it. SEND IT AWAY
[2017-09-04 17:57:12]
kilrah :
Oh? hadn't noticed that
[2017-09-04 17:57:48]
bin4ry :
would have to look again, but it had my current countrycode in one of the files :wink:
[2017-09-04 18:09:08]
timwatkins :
I already sent it on it’s way. I’m just researching now to see if I / we can modify it to accept usb connection and add failsafe hard code in case another firmware update bricks the remote.
[2017-09-04 18:09:48]
timwatkins :
It seems it’s a large problem in the dji forum about bricked remotes from dji not testing the firmware as they should.
[2017-09-04 18:10:59]
kilrah :
flashed mine a dozen times without issue, many others did. As always, there are a couple of failures... maybe it actually had a hardware defect, and having to send it back is a good thing.
[2017-09-04 18:11:35]
timwatkins :
Yea. I said screw there ups slow ground and paid out of pocket for 2 day delivery. Didn’t even get a chance to try the remote.
[2017-09-08 01:00:53]
jsolarte :
I successfully downgraded AC from .900 to .700.
1. Doesn't seem like I need to downgrade RC as it connects to AC with no errors. Is this ok?
2. Do I need to downgrade iOS DJIGo4?
[2017-09-08 03:58:52]
etegration :
Hope to know the app side of things too. after downgrading to .400 or .700, do we have to downgrade the app or use simply just use Litchi?
[2017-09-08 04:37:04]
mavicbreak :
no you don't have to
[2017-09-08 04:56:27]
judah_lucifer :
I am quite sure spark battery is not well programmed.I had one incident recently that Spark move up and down,then suddenly suicide to the ground.I changed battery it is ok again.
Then using the faulty battery,the up and down again.i have to let it hover to 5% then [recharge.it](http://recharge.it) is fine after that.
Any idea on that matter?
[2017-09-08 14:09:02]
jamborino :
Have you updated the battery firmwares since you've had them?
[2017-09-08 23:14:15]
judah_lucifer :
Yes,batteries are all updated.
[2017-09-16 03:51:25]
vertigo :
Quick question. Second hand inspire 1 has suspiciously zero flight time at all in the dji go app. Is there any way via the usb to pull flight time and original activation date. Btw there is no sd Card. Thanks.
[2017-09-16 03:56:18]
vertigo :
Plus is there any way to read the logs to check for crashes etc.
[2017-09-16 04:19:30]
czokie :
Flight time - there is no guarantee they sync'd their DJI GO to DJI cloud - so totally possible to show no flight time when you use it... If you want to look for anything - launch Assistant - and see if there are any log files and what their dates are... As for interpreting, thats a whole other kettle of fish
[2017-09-16 04:20:18]
czokie :
If you dont have any obvious symptoms or problems - its probably not worth the effort to look - especially if there are a large number of flight dat files visible in assistant
[2017-09-16 05:58:32]
kilrah :
Flight time on YOUR app/account is YOUR flight time with the machine, so it's normal it's 0.
[2017-09-16 05:59:35]
kilrah :
Grab the DATs and you might have an idea of the last few flights
[2017-09-16 11:21:54]
jamborino :
I've been playing around too and it definitely requires reassessing and adjusting of how you fly if you want to keep it. I reverted back! :slightly_smiling_face:
[2017-09-16 15:22:26]
vertigo :
Thanks will plug in and have a look
[2017-09-16 20:40:49]
dkovar :
There are two SD cards, one in the camera, one in the aircraft. You can pull the log files (DAT files) via this method:
<https://datfile.net/DatCon/retrieve.html>
(i.e., use Assistant)
Then run them through DATCON or one of the other public parsers. Or, send them to me and I'll tell you more about your aircraft.
[2017-09-16 23:18:54]
judah_lucifer :
Hi guys,is there anyway to disable VPS for Spark?
[2017-09-17 21:04:29]
climatemaster15c :
Obviously new here..1st post. Been a busy summer. Have not flown Mavic Pro since 4/14/17. So I hope my firmware is still good there....but having DJI Go 4 on my phone has ensured it updated beyond the AC. It is at v4.1.8. I somehow never installed DJI assistant. How can I verify the firmware on the AC without connecting to the assistant or DJI Go4? Or where can I find an old version of assistant 2?.....
[2017-09-17 21:06:20]
climatemaster15c :
on another note I did my fair share of testing smart cards/early chip cards back in the day so I do have a few rusty old skills
[2017-09-18 07:18:21]
mavicbreak :
Without connecting it to anything you can not. These links may work for Assistant: <http://www.kanzhaji.com/download/DJI/DJI-Assistant2/>
[2017-09-18 07:30:57]
kilrah :
you would see your version in the app's about page even when offline.
[2017-09-25 22:33:56]
spamayl :
Hello everyone, newbie question: I just purchased a Mavic Pro and it will be here in a few days. If I intend to modify/root it, is there anything I should know or avoid before turning it on for the first time? I would hate to have it auto-update or something past a point of no return
[2017-09-27 04:14:11]
dannstadt :
@spamayl just recently got mine, same question here
[2017-09-27 04:19:15]
haloweenhamster :
Can downgrade the current fw to whatever you like and you can cancel update requests
[2017-09-27 04:20:01]
dannstadt :
great, thank you
[2017-09-27 04:45:11]
spamayl :
Thanks @haloweenhamster !
[2017-09-27 07:28:44]
spamayl :
Nvm. Managed to downgrade to .700 and then it worked. Apparently Dronezbreak will not access the drone at fw 800
[2017-09-27 08:33:39]
ender :
You should be safe, right now you can still up/downgrade and unlock with “our” tools, so feel freee to fool around. On the other side i would work airgapped (Mac/PC and iOS/Android) as often as i can to stop DJI from seeing that you are “playful”.
[2017-09-27 16:57:20]
spamayl :
@ender thanks for the advice. what functions won't be available when airgapped?
[2017-09-27 17:15:45]
ender :
all functions are there except the online stuff e.g. youtube streaming and other online services.
[2017-09-29 23:15:52]
jamborino :
Anyone have a clue how I can update spark battery firmware without doing it through the drone or assistant.
[2017-09-30 07:07:17]
kilrah :
nope
[2017-09-30 07:08:09]
kilrah :
you can update the battery on the drone without updating the rest of the drone though, or downgrade the drone without downgrading battery
[2017-10-02 04:52:50]
andrwho25 :
newb question: can I not adjust the wifi channel using the OTG cable? mines stuck at 2.4 ghz (using the OTG cable) and doesn’t let me change the channel index
[2017-10-02 05:01:33]
andrwho25 :
mine just looks like that - and i can’t change anything (other than SSID and password)
[2017-10-02 06:28:46]
bin4ry :
Correct, that's what I made the patch on android for
[2017-10-02 06:35:08]
andrwho25 :
oh so I can't do it straight with iOS? I'm in the USA
[2017-10-02 06:46:59]
triangular :
I think you can change it from the phone in wifi mode first, and then connect otg and the new setting should stay. Or use the android patch :p
[2017-10-02 07:01:15]
bin4ry :
yeah @triangular has it right. Either you first force it to the specific channel on wifi only then hotswitch to OTG, or just use android and enjoy all possibilities :wink:
[2017-10-02 08:57:11]
andrwho25 :
ah gotcha, thanks bin4ry
[2017-10-02 08:57:43]
andrwho25 :
that’s complicated because by default the wifi is bound from remote to aircraft, and it doesnt show up in the wifi of the iPhone. I’d have to reset it, no ?
[2017-10-02 09:18:37]
triangular :
@andrwho25 someone may say different but I don't think it will work that way because everything resets back to default again when you switch from phone to rc control. What I meant was try connect the phone to rc by wifi, not otg. In wifi mode you should be able to change the network mode. After it changes, then plug in the otg cable and after you see its connected, turn off the phone's wifi.
[2017-10-02 11:01:48]
kilrah :
no you need to connect to the RC's wifi, not aircraft
[2017-10-02 11:10:23]
triangular :
Connect the phone to rc via wifi. That's what I said. That's what you mean right? Then change wifi frequency, then plug in otg and turn off phone wifi.
[2017-10-02 11:28:15]
kilrah :
yeah i was answering his message before reading yours
[2017-10-02 12:45:48]
triangular :
Haha yeah it just got a little confusing
[2017-10-02 13:11:28]
bobataylor13 :
does anyone have links to resources on the p4p+ screen? I found a couple people side loading apps to it, but nothing really useful. If it's running android I'm assuming it can be rooted, download play-store, profit???
[2017-10-02 14:22:28]
andrwho25 :
ah okay. thanks for the explanation. that makes sense !
[2017-10-03 23:17:21]
andrwho25 :
can you charge the spark with a usb powerbank ?
[2017-10-04 04:37:32]
triangular :
Yes. If you dont have the charging hub then USB is the only way to charge it.
[2017-10-04 04:40:36]
triangular :
Usb power is a 5v standard. Car, power brick or portable battery,as long as its standard 5v output.
[2017-10-04 07:00:47]
andrwho25 :
gotcha
[2017-10-04 10:48:47]
kilrah :
actually best is to use a QC3 compatible powerbank. Will charge at 12V /1.5A then.
[2017-10-04 11:53:59]
haloweenhamster :
Spark qc compatible?
[2017-10-04 11:55:48]
haloweenhamster :
Any way to get a qc device to output the higher voltage to use as a switchable power supply?
[2017-10-04 12:33:56]
kilrah :
I believe it's a matter of setting appropriate voltage levels on the 2 data pins
[2017-10-04 16:52:48]
andrwho25 :
are ND filters worth it for the spark ?
[2017-10-04 17:26:13]
kilrah :
not really...
[2017-10-04 17:56:10]
triangular :
Speaking as a photographer and filmmaker, I think ND filters are always worth it if you know how to use them. We dont have a lot of camera settings, or even sharpness and saturation controls on Spark. And with the bitrate at only 24mbps you definitely wont be able to push the image very hard in post. This means you really need to get the cleanest, best picture you can if you intend on doing any post production at all. The biggest challenge to that is getting proper exposure without much camera control to begin with.
So you can either put the camera in Manual mode and adjust shutter speed and ISO manually for each clip you film (and there is a limit to this as well, since you ideally want to keep the same shutter speed on all clips you plan to edit together), or you can use an ND filter when its sunny out, and just leave the camera in Auto. If you do that the shutter speed will still change somewhat, but the ND is narrowing the range of exposure the camera has to deal with, so it wont be bouncing up and down so much every time you face towards or away from the light. It will also help keep exposure within the narrower range it can deal with, preventing clipping the highlights and losing too much detail to overexposure, which the Spark is already prone to doing by default. If you use an ND filter and also keep it in Manual mode, its still a lot of work but this would also allow you to get more consistent results when youre trying to maintain the same shutter speed and overall exposure levels. And then if you do plan on image editing in post, since the exposure range was already limited by the ND, you wont have to push it as hard to brighten, darken or color correct it as much.
So when you ask if its "worth it" for Spark, you should really ask if its worth the effort to manage it. But if thats what you're trying to do, ND filters will make it a easier.
[2017-10-04 17:59:56]
triangular :
If you are mixing it with video from other cameras shot at standards like 24fps, 30, 60 or 120fps, then using an ND filter is the only way youll be able to keep your shutter speeds down low enough to get close enough to match it.
[2017-10-04 18:42:35]
kilrah :
The only thing the ND filter helps for is to allow for longer exposure times, and you're not exactly going to shoot cinematic stuff where proper motion blur is desired/necessary with a spark. If you do, then get some.
[2017-10-04 18:47:17]
triangular :
Its not about motion blur particularly. Thats more applicable with photography, but where video is concerned it keeps the exposure more contained instead of bouncing up and down too far. It especially prevents blown highlights, and for anyone editing or mixing with other video, you must use ND to shoot at lower shutter speeds.
[2017-10-04 18:49:05]
triangular :
its about stuttering effects. 25 or 30fps is typical, and you dont want to shoot higher than 1/50 or 1/60 shutter speed to match the frame rate if possible, or the video is going to start looking really crunchy and stuccato, and wont match with any other video of the same frame rate you mix into the same timeline.
[2017-10-04 18:50:31]
triangular :
so theres a photographic as well as video editing purpose for ND filters. With spark a lot of people wont care so much, but if youre wishing you had more control over editing and exposure, ND is one of the only things you can do to improve the Spark for that.
[2017-10-04 18:53:57]
triangular :
Spark shoots at 30p and no other option, so ideally shutter speed should be at 1/60 or as close as possible, or the video wont be so smooth and wont mix well in a timeline with other 30 or 60p video. ND is the only way to do that.
[2017-10-04 18:54:38]
triangular :
well unless its already dark :slightly_smiling_face:
[2017-10-05 08:50:29]
kilrah :
Don't agree about the exposure aspect, doesn't change a thing. Yes about the shutter speed and motion blur which is what I said, but as I also said I doubt many Spark user has use cases where that matters - and if they do, then yes ND filters are useful but then they already know they need some.
[2017-10-06 19:51:45]
andrwho25 :
is 2.4ghz video supposed to be choppy ? i just discovered all this time i've been on 5.8 where the video is pretty smooth.
[2017-10-06 19:53:18]
kilrah :
aircraft?
[2017-10-06 19:53:38]
andrwho25 :
yeah aircraft to remote.
[2017-10-06 19:55:57]
kilrah :
what aircraft...
[2017-10-06 20:27:21]
andrwho25 :
dji spark
[2017-10-06 20:27:23]
andrwho25 :
sorry
[2017-10-06 20:36:43]
kilrah :
"supposed to" probably not, but I noticed the same thing. Gave up on 2.4.
[2017-10-07 06:02:11]
bin4ry :
Both plain smooth for me. 5.8g get choppy earlier than 2.4g for me. Did you choose a free 2.4 band? Since that is essential, if 2.4 is too crowded in your area you won't get a good signal on it then you have to switch to 5.8 (and vice versa). Always do that in advance of a flight!
[2017-10-07 06:14:53]
kilrah :
yup checked with SA and wifi monitor on phone to take a quiet channel
[2017-10-07 09:01:25]
bin4ry :
ok, i see. Did you change the video quality?
[2017-10-07 09:02:47]
bin4ry :
also did you put the phone in flightmode? since this should help alot :smile:
[2017-10-07 09:03:58]
bin4ry :
Afterall i noticed several people reporting completely different behaviour for sparks video, some say 2.4g works best some say 5.8g works best for range and video, i start to think there maybe differences in the antenna design or such, maybe a revision thing causing this differences ?! I would love to see the comparision in RL between 2 people who report different things, like switch birds and phones etc. etc.
[2017-10-07 09:04:04]
bin4ry :
you know what i mean :wink:
[2017-10-07 09:18:11]
triangular :
I think its environmental. Ive had terrible lag and video stream tearing and signal disconnects... and then in the same place with all the same settings had perfect flights and video stream.
[2017-10-07 09:24:45]
triangular :
could be phone resources, memory and cpu overhead. I never really tried to troubleshoot it because it only happens sometimes. I created a guest android profile with only drone apps and minimal resources running. Next time it happens Ill try that in airplane mode. But for me, its either a problem with phone resources or a problem in the environment, and could happen on either 2.4 or 5.8.
[2017-10-07 09:33:50]
kilrah :
I was in the middle of nowhere. 2.4 gives slightly better range, BUT on 5.8 framerate is always normal even at low signal, on 2.4 it's always stuttery regardless of signal quality.
[2017-10-07 09:34:59]
kilrah :
as such I stay on 5.8 as I find the low FPS unbearable.
[2017-10-07 09:36:31]
kilrah :
wouldn't be surprised some people don't notice the framerate issue even if they have it. some people are much more sensitive to that than others
[2017-10-07 09:44:53]
triangular :
Yeah I just notice that I can get poor performance on either 2.4 or 5.8, but only randomly, and even when selecting a free channel. So I dont think its an rc or bird issue.
[2017-10-07 09:45:09]
triangular :
its inconsistent for me, and only sometimes.
[2017-10-24 08:29:10]
andrwho25 :
Ignoring the propellers, any reason to get the Mavic platinum over the Mavic Pro ?
[2017-10-24 08:29:30]
andrwho25 :
(how largely different are the ESC’s)
[2017-10-25 22:14:19]
acorchia :
3 minutes difference. :point_up:
[2017-10-26 03:58:33]
b_hargis :
If you have a mavic, wouldn't upgrade, if you have neither, I'd say it's worth it. It's about 15% longer flight time, since neither can do the claimed time, but the 3 min difference is real.
[2017-10-26 03:59:08]
b_hargis :
Although, the mavic pro prices are finally coming down if used is an option
[2017-10-26 14:40:07]
ender :
Are we 100% yet that the new ESC’s are “so different” that the old ones cannot be flashed with its FW ? Or that the old cannot be programmed to also produce a “near” sinus waveform ? I did some ESC programming (BHeli) long time ago (which lead to a burning Hexa in 20m Altitide btw. GREAT SIGHT).
[2017-10-26 17:37:46]
adrian :
oh @ender. I would so love it if that could be flashed on the mavic pro
[2017-11-01 08:09:25]
marlasr :
hi, need a bit of spoon feeding.... in apkmirror, how to tell apart mobile from tablet variant?
[2017-11-01 08:10:22]
marlasr :
and i was planning to mod 4.1.8.... anyone has other suggestion... just need nologin and mavic mods, no need for param changes for now
[2017-11-01 08:11:11]
marlasr :
having dji spark
[2017-11-01 08:11:15]
haloweenhamster :
Starts with 1 phone
starts with 2 tablet
starts with 3 both and includes obb
[2017-11-01 08:11:56]
marlasr :
ty hh :smile: you very useful as usual
[2017-11-01 10:26:27]
dnapappas0112 :
Hey guys, quick question. A friend of mine has a Mavic Pro. He wants me to mod it for him to remove height limit and wants more speed. He said he is up to date on firmware, he didn't know he shouldn't be. I fly a P4 with Android. I have been able to figure out pretty much how to do everything with that. My problem is, I know nothing about the Mavic and he is using an iphone6 and I know nothing about that either. Can someone help me out and tell me what the easiest way to go to do these things for him? What will I need to do it? I'm guessing I will have to roll back his firmware. As far as changing parameters, I can do that. I just need to be able to get to that point. I don't want to take any chances and end up bricking his mavic on him. Thanks guys.
[2017-11-01 11:50:41]
haloweenhamster :
@dnapappas0112 are you a windows or mac guy?
Downgrade fw you need DUMLdore for win
<https://dji.retroroms.info/howto/dumldore>
or
dronezbreak for mac
<https://github.com/mavicBreak/DroneZBreak>
once down to 1.3.0700 then you need assistant 2, follow the info here <https://dji.retroroms.info/howto/parameterhacks>
[2017-11-02 10:51:22]
gray757 :
Hello,
I’m having difficulty getting my new Mavic to arm and fly. I have used DUMLDore and the NLD client to upgrade and downgrade between firmware versions .400 .700 to the newest 1.04.0000. I have done this multiple times on the bird and RC but each time after the firmware change the back light on the Mavic glows red and the Go4 app says there is a main data controller error. More specifically it says there is a data logger error. If I use the Assistant 2 software I am able to upgrade the firmware to the latest ones 1.03.1000 and 1.04.0000 and the errors go away and am able to arm and fly. Perhaps I have missed something but why won’t the Mavic arm and fly after a firmware change using DUMLDore or the NLD client but will arm and fly going through the Assistant 2 getting the firmware upgrade. Any help is greatly appreciated. Thanks
[2017-11-02 22:56:34]
hotelzululima :
some questions: that may jog others to answer and get involved..
[2017-11-02 22:56:46]
hotelzululima :
Mavic pro or mavic platinum?
[2017-11-02 22:57:20]
hotelzululima :
software version it was running when you activated it?
[2017-11-02 23:31:43]
gray757 :
Mavic Pro. Firmware on bird was 1.03.1000. RC was on 1.03.700 and Go4 was iOS on 4.1.3. This morning I downgraded bird and RC to 400 and tried to arm and fly. Bird will not arm. Red light on back just glows red. RC directs me to check Go4 app in which it reports the data logging and main controller errors. I upgraded back to 1.04.0000 using the firmware bin from the git repository. No joy. I get the same errors. Using Assistant 2 I reflash the bird and RC with firmware 1.04.0000 and then all is fine. I am able to arm and fly. Errors disappear. It seems that when either DUMLdore or NLD is used the aircraft reports there are errors. Only when firmware upgrading is done through the Assistant will the bird arm and fly.
[2017-11-03 00:45:29]
nocommie :
Not sure if it is similar but others have reported a factory reset before upgrading/downgrading has resolved some issues.
[2017-11-03 00:55:53]
gray757 :
I read that as well and tried it. Still get same errors. Will not let me factory reset while bird is on 400 and 700
[2017-11-05 00:04:23]
hello :
Wonder if someone can shed some light on this or have some suggestions - the AC refuses to flash bins via dumldore. Assistant see's the AC, and I'm able to flash .400 via the VM method...but nothing happens after I send bins to the AC. no flashing LEDs etc. Dumldore sees the AC okay on comm 3. And has been able to backup the AC... stumped.
Trying to get to 700. But have tried 600,800,900 bins...
[2017-11-05 05:03:12]
mldma :
similar to curt's situation, it seems that dumpldore can't upgrade from low version
to high version regularly without any error （such as firmware version in assistant is sill low but the bin file is actually new)once the bird upgraded to new 3.1000 or 4.0000 firmware and again downgrade to some low version(dumldore is always fine for downgrading from high to any low version).
[2017-11-05 05:59:22]
haloweenhamster :
If its com 3 it wont work com 3 is RC com 4 is AC, I'm sure anyway, maybe, literally just woke up, I'll double check in a min
[2017-11-05 06:34:37]
mldma :
Rc link to pc ,dumldore say device found on com4,For the mavic. Com3
[2017-11-05 06:43:37]
haloweenhamster :
just looked and mine is 4 & 5 and I looked at DUMLdore code and it goes looking for port number so it wouldn't matter
[2017-11-05 06:45:54]
haloweenhamster :
@hello what version are you currently on? There is an issue with some AC that wont let it go above 1.3.550 without installing a patch fw first
[2017-11-05 06:51:33]
mldma :
Which patch fw? How to install?
[2017-11-05 07:02:54]
haloweenhamster :
1.3.810 install that then once its finished press record on RC, confirm recording on RC display then install fw of choice
[2017-11-05 07:37:09]
mldma :
(eg. On.400 want to upgrade to .700)can it be understood this way:use dumldore to upgrade AC firmware to 810. When finished press record on RC (don't know at that moment RC is connected to AC or not，can AC link to computer and to RC at the same time? ) .and continue to upgrade/downgrade to the firmware I want ?
[2017-11-05 07:43:27]
haloweenhamster :
Yes AC connected with USB to computer and RC on and linked to AC, yes as described
[2017-11-05 07:48:05]
mldma :
where to find 810 for mavic？
[2017-11-05 07:48:38]
haloweenhamster :
Same place as the other fw
[2017-11-05 07:49:40]
haloweenhamster :
<https://github.com/MAVProxyUser/dji_system.bin/blob/master/bins/V01.03.0810_Mavic_dji_system.bin>
[2017-11-05 07:49:57]
mldma :
ok，thanks
[2017-11-05 08:26:39]
hello :
@haloweenhamster its on .400 at the moment...I'll look in to this patch, Thanks.
I tried something similar in the past (another beta firmware, .350) but it would not record since the usb is connected to the AC. Isn't that still the case with 810?
[2017-11-05 10:44:51]
haloweenhamster :
You could of used 813 the same way, 813 is what dji are now telling people to use instead of 810
[2017-11-05 10:48:43]
hello :
@haloweenhamster - I tried that one how they mentioned in their forums, but it would fail constantly - flash error within assistant. So I didn't want to keep trying...
[2017-11-05 10:51:39]
haloweenhamster :
So they have update issues with their patches as well as their fw, looks like they're doing a good job
[2017-11-05 11:12:56]
hello :
Yea, it's a shame. Quality assurance and software development not their strong points at all!!
[2017-11-05 12:16:07]
haloweenhamster :
@hello what part of the country are you from? I'm Milton Keynes
[2017-11-05 12:18:51]
hello :
Down in West London @haloweenhamster, right next to Heathrow unfortunately aha.
[2017-11-05 15:17:41]
hello :
Agreed, @nocommie this is useful info, I've been going around in circles for a while now...and then just so happened to find this channel full of knowledgeable folk who helped solve.
[2017-11-05 15:54:32]
haloweenhamster :
:grinning:
[2017-11-06 19:30:43]
beers :
Hey gang!
[2017-11-06 19:30:49]
beers :
My Mavic just showed up today.
[2017-11-06 19:30:53]
beers :
Super hyped.
[2017-11-06 19:31:03]
beers :
I would love to unlock/remove/restrictions etc.
[2017-11-06 19:31:19]
beers :
Is there a wiki / DIY for something like this yet?
[2017-11-06 19:56:26]
marlasr :
[dji.retroroms.info](http://dji.retroroms.info) i guess :)
[2017-11-06 22:33:42]
czokie :
!wiki
[2017-11-06 22:33:56]
czokie :
:slightly_smiling_face:
[2017-11-06 22:53:43]
marlasr :
This slack thing reminds a lot on old scool irc :)
[2017-11-06 22:54:02]
marlasr :
Bots and shit and stuff
[2017-11-07 01:13:49]
beers :
i love irc.
[2017-11-07 01:13:53]
beers :
its still legit.
[2017-11-07 01:18:01]
jcarlo :
Click on that link and go watch @digdat0 videos
<https://youtu.be/H2d784lgtuA>
[2017-11-07 01:18:15]
beers :
so for no NFZ
[2017-11-07 01:18:20]
beers :
you have to be at 400?
[2017-11-07 01:18:21]
jcarlo :
Click on the wiki link
[2017-11-07 01:18:44]
jcarlo :
400 and 700
[2017-11-07 01:19:38]
beers :
these videos are legit!
[2017-11-07 01:29:11]
beers :
why do i not have a main.js file
[2017-11-07 01:29:25]
beers :
do i need to connect my mavic to my pc for that to generate?
[2017-11-07 01:30:20]
arrvodesign :
@beers probably you’ve installed the latest Assistant 2 app … need to downgrade to older version
[2017-11-07 01:33:45]
beers :
downgraded
[2017-11-07 01:33:47]
beers :
thanks fam :smiley:
[2017-11-07 01:33:49]
beers :
i see it now
[2017-11-07 01:33:58]
beers :
i love modding things.
[2017-11-07 02:11:49]
beers :
Can only specific versions of DJI GO APP be used?
[2017-11-07 02:11:58]
beers :
I don't want to download and launch a new one, if I can't roll back etc
[2017-11-07 02:13:05]
czokie :
<http://dji.retroroms.info/howto/iosrollback>
[2017-11-07 02:13:38]
czokie :
thats how to rollback
[2017-11-07 02:13:45]
czokie :
for ios
[2017-11-07 02:14:09]
czokie :
Which version of GO to use? Complex question. Lots of factors.
[2017-11-07 02:14:39]
czokie :
But broad answer - <https://nolimitdronez.com> is the best way to be spoon fed.
[2017-11-07 02:14:54]
czokie :
they provide tech support to answer just about all questions related to modding
[2017-11-07 02:15:16]
beers :
It seems that if you download and launch the generic GO app
[2017-11-07 02:15:24]
beers :
it wants you to put the drone @ latest FW
[2017-11-07 02:15:30]
beers :
before it will let you fly at all?
[2017-11-07 02:17:07]
beers :
thank you czokie
[2017-11-07 02:20:51]
czokie :
Modded Android app available - you can build yourself for android or get <https://nolimitdronez.com> for a point and click custom app for android. No point and click for ios yet - but you can build your own - check <https://dji.retroroms.info/howto/iosfrida> and/or <https://dji.retroroms.info/howto/fridahooklibrary>
[2017-11-07 02:40:32]
beers :
Thanks.. I have an android phone that I will probably use.. but the screen on my ipad mini seems a bit better..
[2017-11-07 02:40:38]
beers :
So I will dabble w/ the IOS app too
[2017-11-07 02:40:40]
beers :
thank you sir
[2017-11-08 17:54:49]
windstar127 :
hi, newb here. Is there any good advice for starting to play around with the phantom 4 firmware?
[2017-11-08 18:00:59]
nocommie :
<http://dji.retroroms.info/>
[2017-11-08 18:04:24]
windstar127 :
does the phantom_firmware_tools package work for phantom 4 as well as phantom 3?
[2017-11-09 01:37:34]
beers :
Guys Im confused
[2017-11-09 01:37:46]
beers :
I though FW version 700 allowed NFZ removal etc
[2017-11-09 01:37:52]
beers :
but on NLD site
[2017-11-09 01:37:55]
beers :
they dont list that....
[2017-11-09 01:37:56]
beers :
?
[2017-11-09 02:09:48]
beers :
trying to roll back FW... getting "socket error 10060 connection timed out."
[2017-11-09 02:18:02]
nocommie :
Perform a factory reset then try to downgrade FW again. You wont get much help with info from NLD here. Everything you need is in the wiki
[2017-11-09 02:20:35]
nocommie :
and yes, FW 700 can bypass NFZ with a parameter mod or an app patch
[2017-11-09 02:21:03]
beers :
Thanks nocommie. Doing some reading on this, outside of NLD
[2017-11-09 02:21:12]
beers :
For the firmwares
[2017-11-09 02:21:13]
beers :
I see
[2017-11-09 02:21:14]
beers :
RC
[2017-11-09 02:21:17]
beers :
and non RC
[2017-11-09 02:21:19]
beers :
for the mavic
[2017-11-09 02:21:26]
beers :
trying to find out the difference
[2017-11-09 02:21:43]
beers :
V01.03.0400_Mavic_dji_system.bin.torrent 2017-08-31 16:17 37K
[ ] V01.03.0400_RC_Mavic_dji_system.bin.torrent 2017-08-31 16:17 11K
[2017-11-09 02:22:14]
nocommie :
RC is for the radio control unit
[2017-11-09 02:22:43]
nocommie :
you know, the thing you hold in your hand
[2017-11-09 02:22:50]
beers :
Got it. I am super newb at this.
[2017-11-09 02:22:57]
nocommie :
to control the aircraft
[2017-11-09 02:22:58]
beers :
But not bad with tech / pc / hacking.
[2017-11-09 02:23:06]
beers :
just learning this lingo still.
[2017-11-09 02:23:23]
beers :
Does the RC **have** to be on same FW as bird?
[2017-11-09 02:24:02]
nocommie :
no but FW 700 for the RC doesnt have any side effects. I am using it with mixed modules on the AC (aircraft)
[2017-11-09 02:24:28]
beers :
Thank you. Also, I found this file
[2017-11-09 02:24:29]
beers :
V01.04.0000_Mavic_dji_system_NO_FC_UPDATE.bin
[2017-11-09 02:24:38]
beers :
FC = flight controller = RC ?
[2017-11-09 02:25:28]
nocommie :
I would recommend using 700 on the RC, and mixed modules on the AC. That is a modified FW that is missing the module for the Flight Controller. You can keep the FC module from 700 and still have NFZ bypass.
[2017-11-09 02:25:57]
nocommie :
<http://dji.retroroms.info/howto/modulemix>
[2017-11-09 02:26:25]
beers :
thank you
[2017-11-09 02:26:32]
beers :
what is "mixed modules"
[2017-11-09 02:26:58]
nocommie :
do you see the link I just posted? Have you taken time to review teh wiki?
[2017-11-09 02:27:00]
beers :
nm
[2017-11-09 02:27:06]
beers :
i typed before i clicked
[2017-11-09 02:27:54]
beers :
yes been reading as i go along, verifying things in this channel as i go along,
[2017-11-09 02:28:30]
nocommie :
take some time to look at all the how-tos on the wiki. Even if you dont understand all the terms just plow through them. Then come asks questions for stuff you dont understand. If you ask a question that is stated plainly in the wiki, you wont get much help
[2017-11-09 02:29:03]
nocommie :
we have taken time to write the how-tos so we dont keep repeating the same stuff in here
[2017-11-09 02:29:34]
czokie :
!wiki
[2017-11-09 02:29:36]
beers :
Thank you
[2017-11-09 02:29:36]
czokie :
:slightly_smiling_face:
[2017-11-09 02:34:34]
nocommie :
<https://youtu.be/GpxaaM6wkZw?t=3m10s>
[2017-11-09 03:49:01]
beers :
FTP error when using DUMLdore?
[2017-11-09 03:57:42]
beers :
FTP access failed. Can't FTP into my drone....
[2017-11-09 03:57:45]
beers :
Mavic.
[2017-11-09 15:29:20]
nocommie :
Make sure you can connect by the assistant first.
[2017-11-09 18:52:42]
mwales3 :
I'm interested in getting adb shell access / root on a Mavic (and I'm pretty new to this scene). Does the mavic_combined_0700_root.bin have a combined V01.03.0700 system image and the files to enable root all in one binary that you can flash with DUMLdore?
[2017-11-09 18:55:12]
mwales3 :
The mavic_combined_0700_root.bin is an image on the [github.com/mavproxyuser/dji_system.bin/bins](http://github.com/mavproxyuser/dji_system.bin/bins). I tried comparing it to the V01.03.0700_Mavic_dji_system.bin, but the contents were very different.
[2017-11-09 19:38:25]
kilrah :
yup.
[2017-11-09 20:39:08]
jcarlo :
So just flash it like flashing a regular firmware bin? Do you need to do anything else before you flash it?
[2017-11-09 20:42:40]
marlasr :
Pray, lucky amulet... Or whatever your choice of supersticious ezotery is...
[2017-11-09 21:14:41]
beers :
What is the benefit to being rooted?
[2017-11-09 21:35:43]
kilrah :
as a simple user, none.
[2017-11-09 21:50:24]
beers :
cool.
[2017-11-09 23:08:58]
nocommie :
Until we get a gui or update to DUMLdore or something to allow us to change the S# and some other interesting stuff to fuck with aeroscope :slightly_smiling_face:
[2017-11-09 23:11:22]
nocommie :
What would be hilarious would be to snoop the serial numbers of all craft DJI uses for official demos and such and close those for aeroscope to pickup.
[2017-11-09 23:22:35]
haloweenhamster :
Thought DUMLrub could do that now
[2017-11-09 23:23:08]
haloweenhamster :
Without root
[2017-11-10 18:52:19]
prelator :
Have all of us set our serial numbers to that of Brendan's personal Mavic... :slightly_smiling_face:
[2017-11-13 19:28:20]
maartenvos1998 :
Gonna reinstall from Linux to OSX just to try <https://github.com/mavicBreak/DroneZBreak>, is it still working?
[2017-11-14 08:50:35]
ender :
Hi guys, i was away for 2 weeks for holiday and its hard to keep up :slightly_smiling_face: It seems that DJI improved the 1080p@60Hz mode a LOT on Mavic with the latest FW (classic & Paltinum). Did anyone try a mixed FW (.700 on all modules but camera from the latest FW) to see if that does the magic ?
[2017-11-14 13:06:23]
kilrah :
? didn't read about that
[2017-11-14 13:06:43]
kilrah :
there were rumors with FW1000 but it was certainly not the case from my tests
[2017-11-14 13:06:48]
kilrah :
didn't try 04.0000
[2017-11-14 13:22:45]
ender :
There is a veerrryyy longish thread in “[kopterforum.de](http://kopterforum.de)” and i saw the same vids before & after upgrades, 1060p@60 seems to be usable now. If they DID get around to change the pixel binning low level or if they introduced an AA filter i do not know (and actually dont care too much) but the result is finally what is to be expected…
[2017-11-14 14:43:17]
nocommie :
Interesting. From everything I heard it was a hardware limitation on the non-platinum and could not be fixed with FW. If I recall correctly someone actually posted from DJI to confirm this was the case.
[2017-11-14 14:46:27]
ender :
Not exactly HW limitation, i always speculated about the ability to improve on that. The chip can do it fine, it all depends how hardwired the interface is done…
[2017-11-14 14:50:07]
nocommie :
Well it wouldn't be the first time DJI made a statement that was false :slightly_smiling_face:
[2017-11-14 20:24:44]
brentray620 :
Anyone experienced an FTP access failed error on P4P? Had no issues backing up Firmware, when I tried to flash it failed and FTP was locked out afterwards. I tried DUMLdore 2.0 and still same issue.
[2017-11-14 20:29:04]
brentray620 :
DJIassistant has no issues connecting to the AC
[2017-11-14 20:53:12]
arrvodesign :
@brentray620 try restarting pc and don't start the assistant, plug the AC and run DUML directly and see if it works
[2017-11-15 18:02:15]
brentray620 :
No luck, I'm about to try to upgrade firmware via Assistant and try again. Do I need to root the device before this works? I was able to backup and downgrade Mavic Pro without any issues.
[2017-11-15 18:02:44]
kilrah :
nope no root needed.
[2017-11-15 18:04:23]
brentray620 :
thought on upgrading to v02.00.0106 and then trying to downgrade?
[2017-11-15 18:05:50]
kilrah :
just try flashing anything with assistant. Will probably fail too.
[2017-11-15 20:53:05]
brentray620 :
You were right, assistant failed as well. Are there any other options to push firmware onto a P4P?
[2017-11-16 02:41:26]
gdlmus :
Hi guys,
Does someone know if there is a pilot in the " nolimitdronez "
web site. ? Since four days, I used twice their contact form and one direct email as well, + I chat message... No answer...!
[2017-11-16 07:15:00]
kilrah :
@brentray620 Not that I know of. Sounds like a brick in need of a trip to DJI.
[2017-11-16 07:33:35]
brentray620 :
@kilrah I figured as much, thanks for the reply.
[2017-11-16 10:39:23]
brentray620 :
I was able to grab another Phantom 4 (Model: wm330a), has anyone been successful in enabling "Sports +" on this model? The settings are different from the Mavic Pro, i.e. no Max_Speed.
[2017-11-16 15:08:57]
brentray620 :
I was able to find the settings inside the Phantom 4 to alter speed, i don't have it close to the mavic pro's speed yet
[2017-11-16 15:50:53]
gdlmus :
I am afraid that I already have the answer, but no cost to ask.
Is there a turnaround to get a new MPPlatinum in the air WITHOUT
registering/activating thru DJI with GO 4 or Assistant...?
[2017-11-16 15:52:09]
bin4ry :
offline activation with assistant
[2017-11-16 15:56:20]
gdlmus :
@bin4ry doesnt work, assistant first asks you to connect to a DJI account...
[2017-11-16 15:57:44]
bin4ry :
in old assistant there was this debug mode etc. there was an offline activation. Might be true that you need to login to the software in general, but the bird is not "bound" to your account then AFAIK
[2017-11-16 16:23:05]
gdlmus :
@bin4ry tried every thing with aasistant v1.1.2 and the debug mode. You must be online and connected to a DJI account to access the RC
[2017-11-16 16:30:01]
bin4ry :
ok
[2017-11-16 16:30:17]
bin4ry :
others may know better than me then
[2017-11-16 16:48:39]
gdlmus :
@bin4ry thanks any way
[2017-11-16 16:49:11]
bin4ry :
@jezzab i know you did some offline actiation right ?
[2017-11-16 16:49:15]
jezzab :
@jezzab has joined the channel
[2017-11-16 16:49:26]
bin4ry :
@jezzab ^--
[2017-11-16 16:58:52]
gdlmus :
@bin4ry I don't blame them but it seems that the super geeks, that surely know how to do that... Do not want to reveal, for what ever reason? Thank you @jezzab that has been already very helpful updating fast and succesfuly DUMLdore.
[2017-11-16 17:42:29]
kilrah :
nobody’s hiding anything, what’s known is what’s been mentioned to you. Launch assistant, login, go offline, use the offline activation in debug mode. If that works good, if it doesn’t we’ve never seen another solution mentioned so far.
[2017-11-16 17:58:25]
jcarlo :
What happens if I flash the universal fireworkstar.bin and 400 with root bin via DUMLdore to Mavic?
[2017-11-16 22:32:01]
gdlmus :
@kilrah thanks for the info. But sof far NOTHING has worked for me with a MPPlat.
[2017-11-16 22:32:38]
kilrah :
well, then it isn't possible anymore (doesn't work on spark either i believe)
[2017-11-16 22:32:57]
kilrah :
they probably "fixed" that
[2017-11-16 22:35:20]
gdlmus :
May I suggest that from now on MPro and MPPlatinum be named separately. It seems that the sofwares are different so the turnarounds also... :wink:
[2017-11-17 06:48:55]
kilrah :
they aren't different
[2017-11-17 07:02:16]
jcarlo :
Don't forget the white :grin:
[2017-11-17 08:11:11]
rxhenn :
Just got the Mavic platinum and working fine with the latest 1.04 firmware. I tried downgrading with dumldore to a standard 1.03.700 firmware but it’s giving me a Main Controller Data Error and the light on the back of the Mavic is red. I then tried using assistant to go back to the latest 1.04 firmware and then there’s no more errors and everything works as normal. I know this was something a few people had mentioned before. Is there a way I can make the standard 700 firmware work?
[2017-11-17 08:12:49]
kilrah :
no known one at this point.
[2017-11-17 08:13:52]
kilrah :
need an owner with understanding and willing to try a few potentially risky things to investigate
[2017-11-17 09:25:53]
jezzab :
There is no real secrecy as @kilrah mentioned, it has been described before. I just don't lay it all out how to off-line activate as I have issues where I feel this could be used for malicious purposes. War zones etc. Sure you can make a fake email and register but there is a bread crumb atleast if it's found to be used badly. This is my opinion and how I feel. Also there is another knock on effect I can't mention for a bit more time yet (I have to legally confirm this).
[2017-11-18 15:02:24]
kyokushin :
Anyone succesfuly set up an ruby environment on win, then used Flightcontroller.rb?
[2017-11-18 15:09:51]
haloweenhamster :
Not used the flightcontrollery.rb but Ruby works on win 10, can't get python to work though
[2017-11-18 15:44:41]
gdlmus :
@kilrah YES they are different. MPP has now an SD card glued in the belly. NOT MP. That is why I suggest that we call them by their name. :wink:
[2017-11-18 15:46:29]
gdlmus :
@jezzab I love this one for you say the same an its contrary.
[2017-11-18 15:50:39]
gdlmus :
@jezzab sorry I hit "return". You say "There is no real secrecy" and following phrase "I just don't lay it all out" :wink: I undertand and respect your position. Also, I guess that you already know that DJI has grounded all it's drones in the war areas.
[2017-11-18 16:10:32]
kilrah :
Both MP and MPP have had an internal SD card from day one. Stop talking nonsense.
[2017-11-18 16:11:16]
kilrah :
And they run the same firmware package, and all the same firmware modules apart from the ESC since that's the one hardware difference.
[2017-11-18 18:39:50]
quad808 :
geezzzz...how many Slack channels are there that I don't know about?? LOL
[2017-11-18 18:42:24]
bin4ry :
:joy: I discover new ones regularly
[2017-11-18 18:43:16]
quad808 :
Thanks for the new GO...I would love to use that with all of the 4.1.8 patches and latest firmware!
[2017-11-18 18:44:08]
quad808 :
-305. 306 and 905 of course...:grinning:
[2017-11-18 18:52:43]
bin4ry :
You are welcome to help porting the patches
[2017-11-18 18:52:45]
bin4ry :
:grin:
[2017-11-18 18:53:20]
quad808 :
crap...I wish I had the skillz
[2017-11-18 18:53:47]
nocommie :
I will get to work patching right now. I have done some drywall patching with plaster before. That will work right?
[2017-11-18 18:54:09]
quad808 :
:thinking_face:
[2017-11-18 18:56:12]
quad808 :
I excel in end user support, so you Devs don't have to...:grinning:
[2017-11-18 19:24:23]
jcarlo :
Lmao @nocommie yeah that will work
[2017-11-18 20:08:47]
kyokushin :
/dev/tty.usbmodem14315 - from where to get that file?
[2017-11-18 20:09:42]
kyokushin :
i am doing something wrong, bot on linux and windows
[2017-11-18 20:09:49]
kyokushin :
installed ruby, installed python, installed gems
[2017-11-18 20:12:07]
kyokushin :
any ideas?
[2017-11-18 20:16:42]
opcode :
ruby FlightController.rb -h
[2017-11-18 20:17:05]
opcode :
then check what the -d means in the help
[2017-11-18 20:37:53]
opcode :
Ah, missed that. Looks like a gem is missing (serialport) open the .rb script and check what gems are required
[2017-11-18 20:38:15]
kyokushin :
i imported them
[2017-11-18 20:38:48]
kyokushin :
require 'rubygems'
require 'colorize'
require 'json'
require 'jsonable'
require 'optparse'
$:.unshift File.expand_path('.',__dir__)
require 'DUML.rb'
[2017-11-18 20:39:10]
opcode :
What os?
[2017-11-18 20:39:56]
kyokushin :
win 10
[2017-11-18 20:40:00]
kyokushin :
but on ubuntu i have same
[2017-11-18 20:40:52]
opcode :
gem install serialport
[2017-11-18 20:40:57]
opcode :
Try that
[2017-11-18 20:41:29]
kyokushin :
d:\DUMLrub-master>gem install serialport
Fetching: serialport-1.3.1.gem (100%)
Temporarily enhancing PATH for MSYS/MINGW...
Building native extensions. This could take a while...
ERROR: Error installing serialport:
ERROR: Failed to build gem native extension.
current directory: d:/Ruby24-x64/lib/ruby/gems/2.4.0/gems/serialport-1.3.1/ext/native
d:/Ruby24-x64/bin/ruby.exe -r ./siteconf20171118-9892-q9s2nq.rb extconf.rb
checking for OS... mingw
creating Makefile
current directory: d:/Ruby24-x64/lib/ruby/gems/2.4.0/gems/serialport-1.3.1/ext/native
make "DESTDIR=" clean
'make' is not recognized as an internal or external command,
operable program or batch file.
current directory: d:/Ruby24-x64/lib/ruby/gems/2.4.0/gems/serialport-1.3.1/ext/native
make "DESTDIR="
'make' is not recognized as an internal or external command,
operable program or batch file.
make failed, exit code 1
Gem files will remain installed in d:/Ruby24-x64/lib/ruby/gems/2.4.0/gems/serialport-1.3.1 for inspection.
Results logged to d:/Ruby24-x64/lib/ruby/gems/2.4.0/extensions/x64-mingw32/2.4.0/serialport-1.3.1/gem_make.out
d:\DUMLrub-master>
[2017-11-18 20:42:06]
opcode :
Running as admin?
[2017-11-18 20:42:10]
kyokushin :
yes
[2017-11-18 20:43:23]
opcode :
Strange. I'm not familiar with win and ruby. Try to gem install on ubuntu
[2017-11-18 20:43:36]
opcode :
sudo gem install serialport
[2017-11-18 20:44:37]
kyokushin :
ERROR: Could not find a valid gem 'serialport' (>= 0), here is why:
Unable to download data from <https://rubygems.org/> - no such name (<https://rubygems.org/specs.4.8.gz>)
[2017-11-18 20:44:42]
kyokushin :
its from ubuntu
[2017-11-18 20:46:42]
opcode :
serialport is a valid ruby gem. sorry, can not help more as I'm on mobile.
[2017-11-18 20:47:00]
kyokushin :
thx
[2017-11-18 20:47:22]
opcode :
Maybe someone else can help <!here> ?
[2017-11-18 20:48:12]
t-swindell :
@kyokushin you don't have a toolchain installed that can build the serial gem, from the looks of it.
[2017-11-18 20:49:28]
kyokushin :
hmm toolchain?
[2017-11-18 20:51:56]
kyokushin :
what is that?
[2017-11-18 21:06:31]
kyokushin :
ok, i installed it (it is with ruby installlation, i reinstalled it and installed **everything**). One step forward. At now i have now errors.
[2017-11-18 21:18:06]
kyokushin :
d:\DUMLrub-master>ruby FlightController.rb -d
FlightController.rb:297:in `<main>': missing argument: -d (OptionParser::MissingArgument)
d:\DUMLrub-master>ruby FlightController.rb -d /dev/tty.usbmodem14315 -D
D:/Ruby24-x64/lib/ruby/gems/2.4.0/gems/serialport-1.3.1/lib/serialport.rb:25:in `create': No such file or directory - \\.\/dev/tty.usbmodem14315 (Errno::ENOENT)
from D:/Ruby24-x64/lib/ruby/gems/2.4.0/gems/serialport-1.3.1/lib/serialport.rb:25:in `new'
from d:/DUMLrub-master/DUML.rb:92:in `open_connection'
from d:/DUMLrub-master/DUML.rb:83:in `initialize'
from FlightController.rb:305:in `new'
from FlightController.rb:305:in `<main>'
[2017-11-18 21:18:08]
kyokushin :
its from win
[2017-11-18 21:18:20]
kyokushin :
i do not wnow what i should use as that modem argument
[2017-11-18 21:22:26]
kyokushin :
and thats from ubuntu
[2017-11-18 21:22:27]
kyokushin :
ubuntu@ubuntu-virtual-machine:~/DUMLrub-master$ ruby FlightController.rb -d /dev/tty.usbmodem14315 -D
/home/ubuntu/.rbenv/versions/2.4.2/lib/ruby/gems/2.4.0/gems/serialport-1.3.1/lib/serialport.rb:25:in `create': No such file or directory - /dev/tty.usbmodem14315 (Errno::ENOENT)
from /home/ubuntu/.rbenv/versions/2.4.2/lib/ruby/gems/2.4.0/gems/serialport-1.3.1/lib/serialport.rb:25:in `new'
from /home/ubuntu/DUMLrub-master/DUML.rb:92:in `open_connection'
from /home/ubuntu/DUMLrub-master/DUML.rb:83:in `initialize'
from FlightController.rb:305:in `new'
from FlightController.rb:305:in `<main>'
[2017-11-18 21:30:14]
kyokushin :
i do not know what i should use as that modem argument :confused:
[2017-11-18 22:04:15]
opcode :
tty.usbmodem is your drone. You have to check your /dev/ folder for the right one
[2017-11-18 22:04:41]
opcode :
cd /dev/
[2017-11-18 22:04:43]
kyokushin :
and what it will be on windows?
[2017-11-18 22:05:00]
opcode :
Good question :smile:
[2017-11-18 22:05:19]
kyokushin :
i am not sure usb remap will work on vmware
[2017-11-18 22:08:50]
opcode :
No idea on win. Ubuntu /dev/ is surely present
[2017-11-18 22:13:00]
kyokushin :
which one :smile:
[2017-11-18 22:17:00]
opcode :
Plug in your drone and unplug to find it
[2017-11-18 22:17:07]
kyokushin :
tried it
[2017-11-18 22:17:11]
kyokushin :
no change
[2017-11-18 22:17:13]
kyokushin :
:confused:
[2017-11-18 22:17:19]
kyokushin :
ofc i did 'dir'
[2017-11-18 22:17:39]
kyokushin :
and connected in vmware, but it is connecting as mass storage device
[2017-11-18 22:18:17]
opcode :
Is "serial" in dev a dir?
[2017-11-18 22:19:13]
opcode :
you need to find the USB serial port of your drone
[2017-11-18 22:19:56]
kyokushin :
yes, serial is
[2017-11-18 22:20:43]
opcode :
ls
[2017-11-18 22:23:20]
kyokushin :
i tried with /dev/serial
[2017-11-18 22:23:22]
kyokushin :
same effect
[2017-11-18 22:23:34]
opcode :
Nö
[2017-11-18 22:23:57]
opcode :
cd /dev/serial/
[2017-11-18 22:24:01]
opcode :
And then
[2017-11-18 22:24:06]
opcode :
ls
[2017-11-18 22:24:19]
kyokushin :
by-id
[2017-11-18 22:24:22]
kyokushin :
by-path
[2017-11-18 22:24:25]
kyokushin :
these two things
[2017-11-18 22:24:30]
kyokushin :
are in /dev/serial
[2017-11-18 22:24:34]
opcode :
Id
[2017-11-18 22:24:55]
kyokushin :
usb-DJI_DJI_0123456789ABCDEF-if04
[2017-11-18 22:25:13]
opcode :
ah
[2017-11-18 22:25:30]
opcode :
cd to by-path
[2017-11-18 22:26:59]
kyokushin :
pci-0000:02:03.0-usb-0:3:1.4
[2017-11-18 22:28:19]
opcode :
No. That's not what we're looking for. Google for it. You need tty.usbmodem
[2017-11-18 22:28:23]
opcode :
im off. In the club and shitty network :smile:
[2017-11-18 22:28:31]
kyokushin :
:smile: thanx
[2017-11-18 22:28:37]
kyokushin :
i will try to dig into it
[2017-11-18 22:28:38]
opcode :
np
[2017-11-18 22:28:54]
opcode :
If you dont get it, I can help you tomorrow
[2017-11-18 22:29:00]
kyokushin :
sure, thanx
[2017-11-18 22:47:45]
kyokushin :
use just "COM15" in windows (its dji in my case)
[2017-11-18 22:47:47]
kyokushin :
and got
[2017-11-18 22:47:48]
kyokushin :
d:\DUMLrub-master>ruby FlightController.rb -d COM15 -D
FC Version: 03.02.34.25
Parameters for this version aren't cached yet, reading them first
Table 0 => 388 items
Table 1 => 769 items
FlightController.rb:265:in `fc_monitor_get_droneid': undefined method `pack' for nil:NilClass (NoMethodError)
from FlightController.rb:358:in `<main>'
[2017-11-18 22:48:11]
kyokushin :
same with exe from ocra
[2017-11-19 01:21:51]
gdlmus :
@kilrah "Both MP and MPP have had an internal SD card from day one. Stop talking nonsense." I'm sorry being so dumb while you are so smart. Be careful maybe there are things on which you could be drowned... :wink:
[2017-11-19 02:13:07]
jezzab :
Well you stated wrong facts @gdlmus That is a very good way to confuse people. @kilrah is very much correct. You should be listening and learning, not stating things that are not true.
[2017-11-19 02:49:49]
gdlmus :
@jezzab There are manners for saying right things without being rough. The one that never made a mistake throws me the first stone.
[2017-11-19 03:37:22]
gdlmus :
@jezzab " You should be listening and learning " That's exactly what I am doing here. For you to know, I am a 70 years old person. I have been and still am a FAA CFI (certified fly instructor, all ratings) I would NEVER tell to a student that he just said something that is a " nonsense ", "let's see what led you to your mistake ans see together how to correct it ". At this point I would never endorse @kilrah :innocent: even for a private certificate. For the rest, starting hitting keyboards with an Apple II (37 years) and now writing web sites etc, I guess I have not so bad a knowledge or computer systems. May be more than some of you guys. BUT on Mavic reverse engeniring I definitely am a novice. It's never to late to learn and time to time emit a "nonsense" :wink:
[2017-11-19 03:38:50]
jezzab :
And what would you do if a student told you something that was completely wrong and they told it to you as if they knew the correct answer. They didn't ASK you if that was the case, the student TOLD you how it was
[2017-11-19 03:39:04]
jezzab :
Because that is exactly what you did
[2017-11-19 03:39:23]
jezzab :
Not:
"the MPP has an internal SD card. Does the MP have one as well?"
[2017-11-19 03:43:18]
jezzab :
Anyway, im out of spoons. Have a good day
[2017-11-19 04:23:16]
gdlmus :
@jezzab I gave the answer to your question in my post. And all was I was trying to say is that there are manners to correct someones mistakes and that is what @kilrah does not know how to do. By the way your super supervisor @czokie told me that I insulted you. My apologies if I did. He is willing to ban me from your forum. You know what... At 70 years I am no longer willing to play kiddish games. So be it... Bye and take care, keep helping dummies as I am. Regards. -= Guy =-
[2017-11-19 05:00:08]
czokie :
Sorry for the noise all. FYI to everyone else here - I wrote him a PM saying that I saw his posts came across as insulting, and that was his first and last warning. Instead of heeding that - he attacked in PM while I was out. Problem has been removed.
[2017-11-19 12:16:16]
brentray620 :
Does anyone have a link where I could download old M600 Pro firmware?
[2017-11-23 17:20:13]
jabuasab :
Stupid question but will the p4p lock out the 5.8ghz selection if it thought it was in japan?
[2017-11-25 21:28:25]
luke :
Hey guys- I'm having trouble upgrading my DJI Mavic remote firmware. It's failing every time. It says it's on V01.04.0100 but it's giving a miss-match error and won't take off (error 200). The logs are showing `======================= UPGRADE FAILURE: enter_upgrade_mode failure, ErrorCode: 245` as the failing point. Any ideas? Thanks!
[2017-11-25 21:32:03]
jcarlo :
Are you using DUMLdore or DJI Assistant?
[2017-11-25 21:33:00]
luke :
I've tried both. Both fail
[2017-11-25 21:33:35]
luke :
I'm pretty sure the mavic upgrades fine if the controller is unplugged
[2017-11-25 21:36:28]
luke :
yeah it gets passed enable_upgrading_flag: true if the controller is unplugged or off
[2017-11-25 21:55:57]
jcarlo :
Are you plugging the rc only?
[2017-11-25 22:14:24]
luke :
I tried different combinations. I think I just fixed it though! I found a thread that said to try and hit start recording before running the update with Mavic plugged into USB. Surprisingly, it just worked! I think I'm good now. Thanks!
[2017-11-25 22:15:59]
luke :
I also downgraded DJI Assistant which might have helped.
[2017-11-27 13:23:48]
siva :
once you in 01.04.0100 can you still downgrade
[2017-11-27 13:23:55]
siva :
I tried but not able to
[2017-11-27 13:52:28]
jcarlo :
@siva no for now
[2017-11-27 16:42:50]
chris.bob.fork :
anyone having ftp timeout issues trying to pull update logs?
[2017-11-27 16:58:20]
haloweenhamster :
What AC & fw?
[2017-11-27 17:05:31]
chris.bob.fork :
mavic 1.04.00
[2017-11-27 17:05:48]
chris.bob.fork :
I switched to filezilla and didn't have any problems
[2017-11-27 17:06:16]
chris.bob.fork :
think the pasv command is the discriminator
[2017-11-28 16:07:17]
hungyg :
I'm having issues using DUMLdore to downdrade my Mavic. The FTP connection isn't working. Can anyone help me? It seems to be related to the RNDIS driver
Using Windows 10
[2017-11-28 16:08:51]
nocommie :
First, make sure you have turned off USB power management. Search for a Microsoft article on it.
[2017-11-28 16:15:25]
hungyg :
Which device should I set that for? If I group the devices in the device manager by container, there are 11 devices under DJI
[2017-11-28 16:15:46]
hungyg :
Also I have now tried it on a windows 8.1 laptop and got the same issue
[2017-11-28 16:16:14]
hungyg :
as well as a Windows 7 laptop that managed to start the firmware backup but hung on the first file and eventually timed out
[2017-11-28 16:18:05]
hungyg :
Also do you mean the per-device USB power management option in Device Manager, or the power plan option "USB selective suspending"? I just noticed that the latter was enabled
[2017-11-28 16:20:21]
nocommie :
The USB power management was implemented in 8.1. Since you are getting further in win7, that is prob your issue. i suggest just using win7 for this. Are you sure it hung? How long did you wait? It can take awhile in some cases.
[2017-11-28 16:20:59]
hungyg :
it hung, then popped an alert with the timeout message
[2017-11-28 16:21:12]
hungyg :
saying FTP access failed
[2017-11-28 16:22:07]
nocommie :
maybe someone else can chime in with some stuff to try. I would try a fresh PC that has not been used for DJI prviously and see if it works.
[2017-11-28 16:22:42]
hungyg :
Also I noticed during my DJI assistant installation that when the command window popped up some of the driver installs failed on the 10 and the 8.1 but not on the 7
[2017-11-28 16:23:00]
hungyg :
I'm using assistant 1.2.2-2
[2017-11-28 16:26:14]
hungyg :
maybe I could download 1.1.1 from somewhere and try that?
[2017-11-28 16:43:54]
haloweenhamster :
Try installing a a different version see if the driver's are any better
[2017-11-28 16:54:32]
hungyg :
Update: Took a break to charge the battery back up cause it went down to around 50% from all the attempts, now FW backup seems to be progressing smoothly on win 7
[2017-11-28 16:57:34]
nocommie :
Nice
[2017-11-28 17:37:20]
kilrah :
what fw version
[2017-11-28 17:44:24]
hungyg :
just managed to downgrade from 3.1000 to 3.0700
[2017-11-28 17:45:00]
hungyg :
Now updating to the modified 4.0000 as explained in @digdat0's video
[2017-11-28 17:45:30]
hungyg :
right now everything seems to be going fine, thanks for all the help so far!
[2017-11-28 19:00:54]
hungyg :
New question: I upgraded to 1.04.0000 without the flight controller files as detailed in this video: <https://www.youtube.com/watch?v=RTbQTSJHJUI>
[2017-11-28 19:02:13]
hungyg :
But I don't see a dash next to my version number in Assistant, and there are some parameters are missing, specifically the height limit and NFZ things. Any idea why this is?
[2017-11-28 19:18:30]
hungyg :
@digdat0 have you seen this happen before?
[2017-11-28 19:20:56]
kilrah :
sure you used the right file?sounds like you actually updated everything
[2017-11-28 19:24:39]
hungyg :
but I thought that would disable modifying the parameters completely? I'll try again in any case...
[2017-11-28 19:25:50]
digdat0 :
yeah that souds like the modules werent removed from the newer bin file
[2017-11-28 19:26:25]
digdat0 :
think Kilrah is right
[2017-11-28 19:26:36]
hungyg :
okay, must have mishandled something
[2017-11-28 19:26:49]
hungyg :
thanks for all your videos btw, they're super helpful!
[2017-11-28 19:27:30]
digdat0 :
i just help to share what these smarter dudes figure out :wink:
[2017-11-28 19:27:36]
digdat0 :
and cheers man
[2017-11-28 19:30:42]
hungyg :
Also the reason I want to be on 4.0000 is the low noise prop support
[2017-11-28 19:30:55]
hungyg :
does anyone know if that goes away by removing the flight controller updates?
[2017-11-28 19:31:24]
hungyg :
that sounds like something the flight controller might be responsible for
[2017-11-28 19:32:12]
hungyg :
(basically the Mavic gets really wobbly on 3.0700 with the low noise props on, it can't quite stabilize)
[2017-11-28 19:35:34]
digdat0 :
so my honest belief is that the low noise prop support is a marketing thing to get us to update. I havent seen any difference in my own, i flew on .700 with the new props and had zero issues .. but i know some did have wobbling problems, i wasnt ever able to run into them myself. so i dunno to be honest man
[2017-11-28 19:37:42]
hungyg :
I guess I'll just have to see for myself. I'll let you know if it wobbles.
[2017-11-28 21:04:01]
windstar127 :
does anyone know if redherring works on a p4p? i'm using dumldore, and it says redherring was applied, but when i reboot the drone and run adb devices, it doesn't show up.
[2017-11-28 21:05:05]
jezzab :
Wanna elaborate a bit. What firmware version are you running?
[2017-11-28 21:05:52]
jezzab :
What file are you flashing in?
[2017-11-28 21:06:02]
windstar127 :
i'm running firmware 01.04.0602 on the p4p
[2017-11-28 21:06:28]
windstar127 :
i'm trying to flash in fireworks.tar renamed to dji_system.bin
[2017-11-28 21:07:16]
kilrah :
might be too recent, but not up to speed on p4p anymore
[2017-11-28 21:11:29]
windstar127 :
ok. i'll try to downgrade to a different firmware and try again.
[2017-11-28 22:37:47]
chris.bob.fork :
Does 'DJI_ftpd_aes_unscramble' work for files pulled from a Mavic running 1.04.00? I have tried it on several files and haven't gotten a proper decryption yet.
[2017-11-28 23:55:23]
windstar127 :
more dumb questions: I'm now trying to run RubaDubDUML on my mac (osx) to downgrade the firmware on my p4p. I keep getting an ftp timeout error.
[2017-11-28 23:55:34]
windstar127 :
does anyone know what might be causing that?
[2017-11-29 04:35:40]
jabuasab :
what is the importance of .700?
[2017-11-29 04:38:15]
jezzab :
Nothing. its just a number
[2017-11-29 04:41:53]
jabuasab :
i am just trying to understand what differences there are between 03.0700 and 04.00. why do you want to keep the FC .sigs from .0700?
[2017-11-29 04:42:40]
jezzab :
The ability for the parameters to be modified with a later firmware by keeping the earlier FC fw (which holds the params). And the later firmware allowing extra "features"
[2017-11-29 04:45:11]
jabuasab :
oh okay got it. thanks!
[2017-11-29 14:47:40]
chucken1 :
Does the FCC-hack work with latest dji go app on IOS? Looking at the wiki it seems so, but from what I hear it has stoped working in newer versions of dji go?
[2017-11-29 14:48:52]
bin4ry :
@chucken1 depends on what you intent to do. If you install the modded ios app it will work, why shouldn't it ?
[2017-11-29 14:51:10]
chucken1 :
Nope just the .DJI.configs file...
[2017-11-29 14:55:13]
kilrah :
that’s gone since a couple of versions.
[2017-11-29 14:57:08]
chucken1 :
Ok, so modded app is the way to go now :slightly_smiling_face:
[2017-11-29 15:06:24]
chucken1 :
Is the go app modded on the wiki firmware page or do I have to modd it my self?
[2017-11-29 15:08:38]
kilrah :
whole procedure to go through yourself.
[2017-11-29 15:10:06]
chucken1 :
Ok thanx @kilrah @bin4ry
[2017-11-29 15:23:10]
marlasr :
!wiki
[2017-11-29 15:23:18]
marlasr :
i just like to do it from time to time, lol :smile:
[2017-11-29 15:29:19]
windstar127 :
I have another really dumb question: I'm looking on the wiki for how to patch the GO4 app, and realize that I'm not running it on a phone. I'm running it on the tablet attached to the p4p rc. how do i connect to the rc to update dji GO? do i just connect it to my computer with a usb cable and mount it like any other drive?
[2017-11-29 15:30:27]
bin4ry :
i think you would need an special version for that device
[2017-11-29 15:30:35]
bin4ry :
we did not create one yet
[2017-11-29 15:31:51]
windstar127 :
OK. good to know. i might give it a shot myself at trying to write it. will probably fail, but it'll be a good learning experience.
[2017-11-30 15:26:11]
pingspike :
*tips his cap*
[2017-11-30 15:28:05]
pingspike :
can someone point me in the right direction for a bit of support? I rolled my Mavic back to .700 at the weekend (and the RC), tried to take off near a (empty) stadium today and got the red "Cannot take off" displaying at the top of the app and red taillight on the mavic - is this likely to be due to the GO4 app on the CrystalSky being v4.1.14 ?
[2017-11-30 17:07:14]
pingspike :
or, do I need to change a parameter inside the Mavic? Sorry if this isn't the right place to ask this! Please point me elsewhere if needed :slightly_smiling_face:
[2017-11-30 17:20:15]
kilrah :
No. What version were you on and how old is your mavic/what version did it have when it came, and what's the more detailed error message if you tap the red bar?
[2017-11-30 21:11:23]
pingspike :
Hey, I rolled back from 01.04.0000 - I also grabbed these screen shots of the message if it helps
[2017-11-30 23:02:06]
koenposthouwer :
You need to change the parameters on the Mavic itself to fly in a nfz.
[2017-12-01 00:16:06]
spammagnet77 :
If I just install the latest DJI Go app on my iPad for my new Mavic is it going to make it more difficult for me to mod anything later? noob question sorry
[2017-12-01 00:16:57]
spammagnet77 :
Just started reading all the wiki threads and still overwhelmed. I know I don't want to upgrade to the latest firmware at least
[2017-12-01 00:19:02]
czokie :
Hi fly guy. What is your objective in terms of mods?
[2017-12-01 00:21:46]
spammagnet77 :
well I go out to the mountains a lot and would like to be able to use the drone to fly up the side and not be limited by the 500m restriction
[2017-12-01 00:22:49]
spammagnet77 :
That is the main reason. I think I'd also like to block all the data it sends back to DJI, I believe a mod is needed for that
[2017-12-01 00:24:17]
spammagnet77 :
But yeah the mountain thing is the main reason. I plan to use the drone to scout locations for camping mainly
[2017-12-01 00:28:28]
spammagnet77 :
But it looks like modding an iOS app is a whole ordeal and I'd like to just do some test flights with the new drone now. Flashing the firmware also seems a bit involved but maybe more straightforward for me. If all I want to do is remove the height restriction, would just rolling back the firmware and modding a few parameters be sufficient?
[2017-12-01 01:50:19]
spammagnet77 :
Hmm it looks like it will require the firmware update before it will let me fly
[2017-12-01 01:59:58]
jabuasab :
Does everything for a P4 work on a P4A?
[2017-12-01 02:39:20]
jabuasab :
Also are the fcc/ce/etc power output determined by the firmware (drone/tx) or the actual go app?
[2017-12-01 05:19:06]
spammagnet77 :
if I am on .0800 can I remove the flight ceiling by just editing the appropriate params with DJI Assistant 2? I have the 1.1.2 version
[2017-12-01 09:29:00]
pingspike :
@koenposthouwer @olvrtw thanks both, very grateful, I'll go edit some parameters and try again :+1:
[2017-12-01 09:35:26]
koenposthouwer :
@rich, do you now which parameters you need?
[2017-12-01 09:49:18]
pingspike :
hey @koenposthouwer To give you a bit of background, I live just up the road from a football stadium (as per screen shots above) so the NFZs when flying anywhere near my home are driving me insane. I am assuming it's just these two that I need to change:
g_config_airport_limit_cfg_cfg_disable_airport_fly_limit = 1
g_config_airport_limit_cfg_cfg_limit_data = 20250910
would that be right? there isn't a "stadium" parameter is there?!
[2017-12-01 09:58:56]
kyokushin :
yes
[2017-12-01 10:07:38]
pingspike :
great! thanks @kyokushin :slightly_smiling_face:
[2017-12-01 12:42:22]
tdunsky :
Hello everyone, sorry to trouble you with what is probably a stupid much-repeated question...
[2017-12-01 12:42:37]
tdunsky :
Desperately looking for the much-coveted go.v4_4.1.14-1027326-noSecNeo.apk
[2017-12-01 12:42:46]
tdunsky :
can't seem to find it anywhere...
[2017-12-01 12:47:21]
weprul0r :
!apk
[2017-12-01 12:47:21]
mldma :
search "noSecNeo"
[2017-12-01 12:53:16]
tdunsky :
Thanks a lot!
[2017-12-01 13:06:44]
jabuasab :
What's nosecneo represent?
[2017-12-01 13:10:30]
arrvodesign :
@jabuasab no encryption, so you can apply the patches available on Git repo
[2017-12-01 13:10:58]
jabuasab :
Cool thanks
[2017-12-01 13:14:14]
jabuasab :
So say you want to turn off nfz do you need this version of the app and then modify that or can it be achieved just through modifying the parameters in the assistant software?
[2017-12-01 13:14:59]
marlasr :
!wiki
[2017-12-01 13:15:48]
jabuasab :
I'm a EE not CS lol. I'm trying to learn this world. I find it pretty interesting.
[2017-12-01 13:18:04]
arrvodesign :
@jabuasab in short, you need .700 FW and then you can do you params in the Assistant 2. Make sure the Assistant is not the latest version as it won’t let you even to get to the params. Also, read-up as you can find how to create mixed modules FW that has its own benefits.
[2017-12-01 13:22:22]
jabuasab :
@arrvodesign I have been reading about the mix firmware stuff where you just delete the fc .sig files before you push the update. It's pretty cool stuff. I am amazed how you guys figure this out. I'm here to learn from you all.
[2017-12-01 13:50:07]
tdunsky :
Hi again,
[2017-12-01 13:50:20]
tdunsky :
Regarding the options in the windows patcher
[2017-12-01 13:51:12]
tdunsky :
Where do I find info on the different patches e.g. fakeLogin, fixLoginButton etc., what they do, why they are beneficial?
[2017-12-01 13:51:14]
tdunsky :
Thanks
[2017-12-01 13:52:51]
nocommie :
!wiki
[2017-12-01 14:16:40]
tdunsky :
Got it thanks!
[2017-12-01 14:19:39]
haloweenhamster :
Its better to run the command line
[2017-12-01 15:35:17]
jabuasab :
i have a p4. if i want to do the 32 channel mod, do i need to be at a certain FW and app version? i am currently on 4.1.15 running on android and latest version 02.00.0106
[2017-12-01 15:42:42]
pingspike :
@koenposthouwer @olvrtw @kyokushin Just a quick "THANK YOU!" - just been out and tested inside the local stadium NFZ, no issues at all, I was able to take off no problems (unlike yesterday!) I received a warning on the CS, clicked on NO and it went away, never saw it again. Red warning at the top saying "DO NOT FLY in this zone. Land now." but it allowed me to carry on fine (this is normal, right?) - It was windy so I didn't go far, just 45m up and 50m as I wanted to check for any 30m limitations
[2017-12-01 15:42:49]
pingspike :
all sorted guys, thanks!
[2017-12-01 15:44:01]
pingspike :
for reference, CrystalSky 7.85" Ultra running the latest v02.04.02.00 which uses GO4 v4.1.14 on a Mavic Pro rolled back to .700 :+1:
[2017-12-01 15:45:30]
pingspike :
and we're up! Thanks once again guys :smile:
[2017-12-01 15:51:27]
koenposthouwer :
Cool!
[2017-12-01 15:52:25]
koenposthouwer :
You can update now also using the mix and match method: <https://youtu.be/RTbQTSJHJUI>
[2017-12-01 15:53:40]
pingspike :
heh, one step at a time :wink:
[2017-12-01 15:58:29]
jabuasab :
is it the same method to disable the NFZ on a P4 as mavic?
[2017-12-01 15:58:36]
jabuasab :
i am currently on 4.1.15 running on android and latest version 02.00.0106
[2017-12-01 17:49:07]
kyokushin :
what is 'wheel warning'?
[2017-12-01 18:29:31]
haloweenhamster :
For i2
[2017-12-01 18:31:30]
lolo780 :
Fly the wheels off it!
[2017-12-01 18:59:04]
jabuasab :
lol
[2017-12-01 18:59:16]
jabuasab :
i was curious on that setting as well
[2017-12-01 22:08:00]
jezzab :
It disables the warning when you go wheely wheely fast
[2017-12-01 22:08:23]
jezzab :
Ba Doom Ching
[2017-12-01 22:31:26]
jabuasab :
Ha
[2017-12-01 22:31:28]
jabuasab :
Ha
[2017-12-01 22:31:30]
jabuasab :
Ha
[2017-12-01 22:31:32]
jabuasab :
Lol
[2017-12-01 22:44:50]
jezzab :
RDRR
[2017-12-03 03:21:54]
jabuasab :
which tool allows the ability to change the ID?
[2017-12-03 07:51:11]
haloweenhamster :
<https://github.com/MAVProxyUser/DUMLrub?files=1>
[2017-12-03 07:51:39]
haloweenhamster :
Flightcontroller.rb
[2017-12-03 08:42:24]
ltlasset :
Can someone tell me why I might want to revert to an earlier version of DJI GO 4 for iOS? I get with Android you can patch and modify it, but why would someone want to revert to an earlier version for iOS, is there some benefit or feature that was removed?
[2017-12-03 08:57:07]
jezzab :
Later versions the ability to remove NFZ restrictions, modify parameters for speed and height were removed
[2017-12-03 09:10:52]
ltlasset :
So what if I do a firmware mod to remove the NFZ on the Spark (I believe the last firmware that can have height/NFZ mods is 300, correct me if I am wrong please)? Will that override it, or do I need to have both the firmware mod on the drone AND a previous iOS app?
[2017-12-03 09:10:57]
ltlasset :
What about Litchi?
[2017-12-03 10:16:11]
spammagnet77 :
I'm wondering this as well. I have removed the height restrictions through the firmware (I think) but rolling back Go is going to be a big pain in the ass for iOS. Hoping I don't need to
[2017-12-03 10:16:41]
spammagnet77 :
Let me know if you get an answer to this
[2017-12-03 15:33:40]
jabuasab :
@haloweenhamster
if options["droneid"]
if options["value"]
reply = fc.fc_monitor_set_droneid(options["value"])
if reply == 0
puts "Success setting droneID to '#{options["value"]}'"
else
puts "Failed setting droneID, errorcode: #{reply}"
end
else
reply = fc.fc_monitor_get_droneid()
puts reply
end
exit
end
[2017-12-03 15:33:46]
jabuasab :
this section?
[2017-12-04 01:51:00]
spammagnet77 :
I just downgraded my Mavic and RC to .0700. Do I need to flash the aircraft again with each spare battery?
[2017-12-04 02:27:09]
lolo780 :
@spammagnet77 I didn't need to.
[2017-12-04 02:44:09]
spammagnet77 :
What happens if I fly up into a canyon that climbs into the mountains and it gets to 600m AGL above my position but only 50m AGL from the mountain and I lose connection? RTH can only be set to 500m above my location so will it try and drop down to 500m (-50m AGL) and then crash into the ground?
[2017-12-04 02:48:52]
jezzab :
It is 500m from the elevation you took off
[2017-12-04 02:50:47]
spammagnet77 :
right yeah, I misspoke. 500m from my elevation but -50mAGL where the drone is currently. I'll edit my question
[2017-12-04 02:52:07]
jezzab :
It will drop to the elevation of +500 from your takeoff elevation
[2017-12-04 02:52:18]
jezzab :
if there is a mountain in the way of that.....
[2017-12-04 02:53:10]
lolo780 :
Make sure your lower sensors are on
[2017-12-04 02:53:34]
spammagnet77 :
are they still on in sport mode?
[2017-12-04 02:54:55]
lolo780 :
Yes for landing protection. ATTI as well. Tested and landed safely one time.
[2017-12-04 02:55:34]
spammagnet77 :
ahh ok so do you think if would just land where it was, rather than return home?
[2017-12-04 02:56:42]
lolo780 :
It should rth because it will fly horizontally first
[2017-12-04 02:59:14]
spammagnet77 :
hmm ok, well that is better than crashing. But would put me too high above ground level to be within compliance. bummer
[2017-12-04 03:01:52]
spammagnet77 :
although I bet I would regain connection before it came back too far and I could bring it back down
[2017-12-04 03:02:00]
spammagnet77 :
that might be ok
[2017-12-04 03:02:10]
lolo780 :
Boost your RC
[2017-12-04 03:02:51]
spammagnet77 :
hmm yeah I should look into that. This would be with like a bigger antenna?
[2017-12-04 03:04:02]
lolo780 :
Antenna and boosters. I use the MaxxUAV Evolite kit and within a few km I still get strong signal despite buildings, trees etc.
[2017-12-04 03:05:16]
lolo780 :
Line of sight I've been out over 18km and no signs of running out of signal. Battery is another story though.
[2017-12-04 03:07:52]
spammagnet77 :
good to know thanks. I think I only need to get about 3.5 miles (5.6 km) into this canyon, but I think I have to climb maybe 1000m.
[2017-12-04 03:07:56]
spammagnet77 :
Basically there is a cabin up there that you can camp at but it is first come first serve, and it takes like an hour to drive up to it.
[2017-12-04 03:08:38]
spammagnet77 :
so I was hoping the drone could get up there in maybe 7 minutes or so and save us the drive if it's occupied
[2017-12-04 03:12:23]
jabuasab :
@lowellfoo780 are you using external batts?
[2017-12-04 03:20:21]
lolo780 :
Yes
[2017-12-04 03:20:27]
lolo780 :
Thunderpower HV
[2017-12-04 03:39:04]
jabuasab :
What capacity?
[2017-12-04 03:47:50]
lolo780 :
4500
[2017-12-04 03:48:15]
lolo780 :
224g with xt30. 229 Wh/kg
[2017-12-04 04:04:02]
ltlasset :
So what if I do a firmware mod to remove the NFZ on the Spark (I believe the last firmware that can have height/NFZ mods is 300, correct me if I am wrong please)? Will that override it, or do I need to have both the firmware mod on the drone AND a previous iOS app?
[2017-12-05 15:35:10]
windstar127 :
hi, i've got a rather convoluted question. I have a p4p with the controller with the integrated tablet. I want to run in offline mode with the unlocked dji go app. at this point, the best solution I can come up with is root the controller, extract the dji go app on the controller (because it's different than the normal one for android), and rewrite said app.
is there an easier solution that i'm missing?
[2017-12-05 16:40:56]
opcode :
@windstar127 no, thats the way to go. you need to compile your own apk.
[2017-12-05 16:41:52]
kilrah :
and you'll probably have to write your own patches since that version isn't supported
[2017-12-05 16:42:37]
windstar127 :
ok. just wanted a second opinion before i started on this to make sure i wasn't missing something straightforward.
[2017-12-05 18:02:04]
jabuasab :
is there any information that i can read on to figure out how to extract information for the .DAT file?
[2017-12-05 18:08:02]
kyokushin :
anyone can help with configuration of Kismet? its new tool for me, i just installed it, added source interface, then i do not kompletely know how to configure it and attach python script for detect Drone ID
[2017-12-06 10:01:33]
hello :
Hi guys - I'm thinking of picking up a P4P, are the latest firmware's locked in regards to tinkering or downgrading? (As per Mavic)...
[2017-12-06 11:09:46]
czokie :
Been no firmware upgrades for my P4P in a long time...
[2017-12-06 13:03:59]
hello :
Ok cool, I'll grab it later and see
[2017-12-06 19:11:30]
ensjesse :
@hello the last FW that is confirmed to support all the parameter mods is reported to be .0418 per <http://dji.retroroms.info/faq/version/p4p?s[]=p4p>
[2017-12-06 19:12:22]
ensjesse :
It's the version that I run. The parameters depend on the app version you are using as to if they will work or not.
[2017-12-06 19:13:04]
ensjesse :
Sorry I was incorrect it is 0509
[2017-12-06 19:29:02]
hello :
Thank you @ensjesse - I have it here but have not activated it. Any simple way to bypass that? (Sorry if that's not allowed to be discussed here) ive got 4.0.8 on iOS. On phone and tablet. I have the recent modded Android app, but not tried that yet...I've been flying a mavic so far.
[2017-12-06 19:31:33]
hello :
I don't want it to force me to update upon activation!
[2017-12-06 20:02:32]
hello :
Just checked via assistant, it's on 509, all good.
[2017-12-06 20:03:26]
hello :
There was a quick inconsistent firmware module that popped up. Applied.
[2017-12-06 20:12:52]
ensjesse :
@hello. Activation might be applied with the same version of assistant that you use for parameter mods running with factory mode enabled and through the commands enabled there but I have never done that so I can not confirm if it works that way, works that way on certain fw versions or with P4P at all. But thats your ticket for one method that is known
[2017-12-06 20:16:01]
hello :
@ensjesse okay thanks again for the pointer, I'll take a peek.
[2017-12-06 20:26:01]
hello :
Okay that worked. I'm not too fussed about DJI activation the normal way, as I can see that's what starts the warranty. But if someone can confirm that it doesn't force updates upon activation...
[2017-12-06 20:27:33]
haloweenhamster :
Doesn't for mavic, can't see why it would be any different on phantom
[2017-12-06 20:33:00]
hello :
Yea, I'm just being silly / paranoid. Cool cool.
[2017-12-06 20:34:17]
flyingkite :
Does anyone know which version of the go app (IOS) unmodded works nice with spark fw .701? .701 fw will have 305, 306, 905 from .300 fw
[2017-12-06 22:30:49]
ensjesse :
I am not sure about how well it works with Spark but on IOS I am preferring 4.1.2 with my P4P and Inspire 2
[2017-12-07 01:24:26]
beers :
hey guys
[2017-12-07 01:24:33]
beers :
doing some firmware module mixing
[2017-12-07 01:24:46]
beers :
to remove NFZ
[2017-12-07 01:25:03]
beers :
what module do I need to take out of the new 4.0100
[2017-12-07 01:25:09]
beers :
and replace with the old 700?
[2017-12-07 01:25:39]
beers :
also, to make auto updates shut up?
[2017-12-07 01:25:52]
beers :
is that just in the APP? disabling forced updates?
[2017-12-07 01:30:33]
lolo780 :
Use 4.1000 and remove 905
[2017-12-07 01:36:18]
haloweenhamster :
306 for nfz parameter change
[2017-12-07 01:37:22]
haloweenhamster :
what do you currently have installed?
[2017-12-07 01:39:27]
haloweenhamster :
when you say "and replace with the old 700?" What do you mean?
You can't put different module versions in a bin file as they will be ignored
[2017-12-07 01:47:57]
beers :
hm
[2017-12-07 01:48:00]
beers :
i was following this vid
[2017-12-07 01:48:10]
beers :
<https://www.youtube.com/watch?v=RTbQTSJHJUI&feature=youtu.be>
[2017-12-07 01:54:37]
haloweenhamster :
Best to use
<https://github.com/cs2000/DankDroneDownloader>
To get fw now as github is no longer paid for and some have had issues downloading
[2017-12-07 01:56:09]
haloweenhamster :
Download 1.3.700
Flash to mavic
download 1.4.0000
Delete 306 using 7z
flash to mavic
Job done
[2017-12-07 01:58:16]
beers :
what about 305?
[2017-12-07 02:00:10]
beers :
this downloader is pretty slick. thank you.
[2017-12-07 02:05:27]
beers :
Does the FC need to be flashed seperately?
[2017-12-07 02:05:35]
beers :
I have never updated my controller
[2017-12-07 02:12:33]
haloweenhamster :
The RC is separate yes best to have it the same as the AC
[2017-12-07 02:18:47]
beers :
Okay. Thanks. .700 or 1.4.0000?
[2017-12-07 02:32:39]
haloweenhamster :
1.4.0000
[2017-12-07 02:35:04]
haloweenhamster :
O yeah originally it was both 305 & 306 what is thought that 305 breaks precision landing so people are currently testing to make sure it's still works with just 306
[2017-12-07 02:36:24]
haloweenhamster :
Testing precision landing that is the parameter part still works
[2017-12-07 05:26:37]
beers :
thank you!
[2017-12-07 16:20:06]
aqws6189 :
any hint where to find noSecNeo v4.1.14 apk? my first question here, sorry if off topic
[2017-12-07 16:29:59]
marlasr :
!apk
[2017-12-07 16:34:08]
aqws6189 :
Thanx for prompt answer!
[2017-12-08 04:07:44]
ozflyer :
Do you know if it's 305 or 306 that needs the sd card on mobo? (Or both...)
Cheers
Pano on the Litchi app is good and automated. As well as missions.
I use that and am staying on 4.000 fw
[2017-12-08 07:02:22]
i :
Could anyone told me how to unlock the NFZ on Spark? Thanks in advance!
[2017-12-08 10:37:27]
marlasr :
!wiki
[2017-12-08 12:41:34]
i :
Thanks man... I think I could figure it out
[2017-12-08 16:26:55]
irischnpak :
I just tried out the modded Go App 4.1.9 V37 and got the resource file error. I could not find any workaround via Google. Does anyone here has more information?
[2017-12-08 20:40:36]
quad808 :
the resource file is the obb file that needs to be downloaded
[2017-12-08 20:41:05]
quad808 :
use 4.1.14 patched. Better
[2017-12-08 20:42:25]
haloweenhamster :
Or patch one with it embedded
[2017-12-08 20:45:05]
haloweenhamster :
can't remember which one is 4.1.9 but its one of them
[2017-12-08 20:45:05]
haloweenhamster :
<https://drive.google.com/folderview?id=1o9kpGIXXWHFdcF6qUha3z_-9M1iHRozw>
[2017-12-09 18:08:46]
andrwho25 :
is the cheap parabolic extender better than ones bought from titan drones for spark ?
[2017-12-10 20:52:32]
psyke930 :
Do you guys know if there's any way to force FCC mode on Phantom 3 SE (uses Dji Go3)
[2017-12-11 10:05:24]
xnohat :
!apk
[2017-12-13 00:08:30]
windstar127 :
out of curiosity, are the system files like dji_sys and dji_flight found in the 0801 firmware sigs the same as what's on the drone? (do i have my terminology right?)
[2017-12-14 15:15:28]
hello :
Sorry if this has been asked or is in plain sight - any way to wipe flight logs from a P4P?
[2017-12-15 11:33:37]
ralim :
Hi, Sorry if newbie question... Did try the search... :confused:
Has anyone around here looked into the UART protocol used on the newer batteries (Trying with Mavic ones) ? Or anyone who has any experience on disassembling the MSP430 code ?
[2017-12-15 12:20:19]
kilrah :
i2c i think
[2017-12-15 12:20:37]
kilrah :
believe there's code somewhere to emulate the comms on an arduino
[2017-12-17 06:34:41]
ralim :
Ah, I couldnt find anything on the newer protocol (messages start with 0x55) and it all seemed to be UART when tapping the charger hub and craft ?
[2017-12-17 06:34:55]
ralim :
Would love any pointers on the newer protocol though
[2017-12-18 17:08:56]
bobby.ouyang :
I'm trying to set the maximum way point flight speed to 20 m/s, so I changed g_config_waypoint_max_horiz_vel from 15 to 20. However, DJI's WaypointMission.class checks the parameters of the way point speed and limits it to 15.
Is there a workaround to it without having to decompile the .class file and recompiling it?
[2017-12-18 23:05:29]
nocommie :
A couple things I would like to learn if someone could help me out. i have done a good bit of reading etc and think I just need a little bit of one on one help to get things going.
1. I am interested in getting DroneID on Kismet up and running. I have installed and updated Kismet on a linux box but am not sure how to get DroneID running on it. I have read the DroneID git etc but just don not know how to proceed.
2. APK modding. I have dissected several of the existing patches and have been able to use that info to manually mod the nosec. However, I am having a tough time understanding exactly how to figure out how to disable or change something in the app. What I want to do is very similar to removing the wind warning popup. I have gone so far to located what I want to mod in strings and certain smalis and have identified the hex value. Just need a bit of help from there.
Feel free to DM me instead of discussing here. I will be sure to pay forward any help.
[2017-12-20 04:22:22]
hdizzle :
Is it possible to remove modules from the .800 firmware for the Spark and still be able to remove NFZ and adjust speed settings etc. in DJI Assistant? Or is it advised to use older firmware?
[2017-12-20 04:35:25]
hdizzle :
Also I enabled the dev tools and turned on debuging on the latest DJI Assistant it was very easy just a matter of blanking out the banDevtools function and rebuild the app.
[2017-12-20 14:04:09]
nocommie :
700 is the preferred FW to start with. It still allows modding of all parameters. Check out the mixing modules info for info on how to get features from firmware later than 700 (quickshots for example). How about share the modded assistant program here or at least update the wiki to show how it can be done.
[2017-12-20 14:04:13]
nocommie :
!wiki
[2017-12-20 16:31:01]
kilrah :
he said spark, not mavic.
[2017-12-20 16:47:27]
nocommie :
Correction FW300 not 700. The mixed modules page in the wiki covers both <http://dji.retroroms.info/howto/modulemix>
[2017-12-20 19:14:48]
irischnpak :
Today I tried to do a factory reset on my Goggles (going to sell them)
They should view the introduction screens again and not be linked to my Mavic anymore. I already deleted the flight-logs via FTP, but "Factory Reset" via DJI Assistant did not work. Also tried to root them, but since the Goggles don't run a NFZ update I don't how to execute the "new" grep command once installed.
Any hints?
[2017-12-20 22:58:19]
hdizzle :
@nocommie yes i’ll share
[2017-12-21 01:21:19]
hdizzle :
@nocommie <https://ufile.io/3jltl>
[2017-12-21 01:21:51]
hdizzle :
replace app.asar with that one, it enables dev mode and lets you set debug to 1 in the latest DJI Assistant
[2017-12-21 04:26:59]
khalidy82 :
Hello people iam a total newbie and need help... i have downloaded nld latest app and flashed my bird... i use a iphone 6 and iam wanting to know whats the best app to use alongside it, an app where i can set mission eg tell my bird to go to a waypoint and come back but i live near a nfz thats why i got the nld.. but witch app is best.... please
[2017-12-21 04:27:40]
khalidy82 :
Also im not very good with abbreviations or tech stuff
[2017-12-21 04:28:27]
khalidy82 :
Or even better any1 in the uk i can bring my bird to and they can hook me up and ill pay for the help
[2017-12-21 04:34:43]
hdizzle :
If you used NLD to remove the NFZ stuff I think you can use any app you want.
[2017-12-21 04:35:21]
jcarlo :
@hdizzle what's that little video? I can't make it out.
[2017-12-21 04:36:31]
hdizzle :
@jcarlo what video is that?
[2017-12-21 04:36:58]
hdizzle :
oh the link i posted nah it’s not a video I patched latest DJI Assistant to enable dev tools
[2017-12-21 04:38:46]
jcarlo :
ok. there is like a little gif window thats why
[2017-12-21 04:38:57]
hdizzle :
yea i noticed that after you said
[2017-12-21 04:39:59]
jcarlo :
lol. yeah I thought it was an instruction of how you replaces the app.asar
[2017-12-21 04:42:37]
hdizzle :
nah very easy to replace tho, it should be cross platform (the point of electron) that one is from my mac tho.
[2017-12-21 04:48:59]
khalidy82 :
Hmmm appreciate the reply sparky but need to be sure before i get the app... ok so whats the best app say for if i want my drone to go to a co ordinate on a map
[2017-12-21 04:50:42]
hdizzle :
Oh ok I’m not sure about that
[2017-12-21 06:43:38]
dji-rev-slack :
Sparky, does the Dev Tool menu actually show up? I unpacked app.asar and it appears that the HTML for the menu has been removed.
[2017-12-21 06:45:17]
jezzab :
It was my understanding, based on a guy here a while ago that was trying to rebuild the new 1.16, that all of the stuff was actually removed. He was inserting it all back in
[2017-12-21 06:50:11]
hdizzle :
@dji-rev-slack like this yes?
[2017-12-21 06:50:37]
jezzab :
Go INTO it
[2017-12-21 06:50:45]
jezzab :
Not just the side bar
[2017-12-21 06:50:49]
jezzab :
Debug = 1
[2017-12-21 06:50:57]
jezzab :
and it should show the extra stuff
[2017-12-21 06:51:24]
hdizzle :
Ah ok not with drone at moment to try
[2017-12-21 06:53:25]
jezzab :
Thats debug in V1.12-2 with my Spark plugged in
[2017-12-21 06:54:29]
hdizzle :
And they pulled that HTML UI out of the latest did they? Bugger. I removed the banDevTools() function and got the dev tools so I could enable debug and didn't go beyond that.
[2017-12-21 07:16:07]
dji-rev-slack :
Here's my app.asar. By default, debug = 1, dev tool = true, and factory = true. You don't have to set it every time.
<https://www.dropbox.com/s/bfcjy3vaofzwkuo/app.zip?dl=0>
[2017-12-21 07:16:55]
dji-rev-slack :
You still don't see the dev tool. I compared the html between 1.1.2 and 1.1.6. 1.1.6 is missing the entire menu.
[2017-12-21 07:18:35]
hdizzle :
Bummer. Can the menu be ripped out of 1.1.2 and put in 1.1.6?
[2017-12-21 07:19:10]
dji-rev-slack :
I believe so, but there are a bunch of html files involved.
[2017-12-21 07:22:27]
dji-rev-slack :
base.css:439
[2017-12-21 07:22:31]
dji-rev-slack :
m100.js:39
[2017-12-21 07:22:38]
dji-rev-slack :
ag410.js:56
[2017-12-21 07:22:40]
dji-rev-slack :
usb.js:34
[2017-12-21 07:22:47]
dji-rev-slack :
littlepilot.js:54
[2017-12-21 07:22:52]
dji-rev-slack :
bsp-device.js:13
[2017-12-21 07:22:55]
dji-rev-slack :
inspire2.js:56
[2017-12-21 07:23:00]
dji-rev-slack :
m210.js:56
[2017-12-21 07:23:05]
dji-rev-slack :
m600.js:33
[2017-12-21 07:23:08]
dji-rev-slack :
a3.js:38
[2017-12-21 07:23:12]
dji-rev-slack :
n3.js:38
[2017-12-21 07:23:15]
dji-rev-slack :
mg.js:35
[2017-12-21 07:23:18]
dji-rev-slack :
zd900.js:22
[2017-12-21 07:23:22]
dji-rev-slack :
a3_agr.js:38
[2017-12-21 07:23:25]
dji-rev-slack :
p4.js:54
[2017-12-21 07:23:29]
dji-rev-slack :
wm100.js:52
[2017-12-21 07:23:34]
dji-rev-slack :
n3_agr.js:38
[2017-12-21 07:23:51]
jezzab :
Why bother?
[2017-12-21 07:23:59]
jezzab :
Unless you use Inspire etc etc
[2017-12-21 07:24:02]
dji-rev-slack :
basically a general javascript and those broken down to models
[2017-12-21 07:24:18]
jezzab :
There were no updates for P4, Mavic, Spark that were substancial
[2017-12-21 07:24:54]
dji-rev-slack :
i say mod base.css, usb.js, littlepilot.js, bsp-device.js, a3.js, mg.js, and wm100.js
[2017-12-21 07:25:28]
dji-rev-slack :
what is n3?
[2017-12-21 07:25:53]
dji-rev-slack :
btw, does anyone wanna buy dji goggles, lol?
[2017-12-21 07:26:01]
dji-rev-slack :
i wanna get the racing edition
[2017-12-21 07:26:18]
jezzab :
This was the bloke
[2017-12-21 07:26:19]
jezzab :
<https://www.youtube.com/watch?v=U7C_O4OU9uo>
[2017-12-21 07:26:32]
jezzab :
He was working on it
[2017-12-21 07:26:39]
jezzab :
There is a github repo somewhere
[2017-12-21 07:27:53]
dji-rev-slack :
i saw this
[2017-12-21 07:28:09]
jezzab :
@m1dn1ghtn1nj4
[2017-12-21 07:28:14]
jezzab :
Ahh he IS still here lol
[2017-12-21 07:28:26]
dji-rev-slack :
He's been injecting binary codes to app.asar.
[2017-12-21 07:30:45]
dji-rev-slack :
My new mavic pro platinum came with 4.0100
[2017-12-21 07:31:07]
dji-rev-slack :
no modding for me.
[2017-12-21 07:33:57]
jezzab :
:disappointed:
[2017-12-21 07:36:02]
hdizzle :
Oh bummer bout the fw!!!
[2017-12-21 07:43:47]
dji-rev-slack :
so a3 and n3 are flight controllers
[2017-12-21 10:12:47]
mathieu.peyrega :
Same here, I got a new MPP and it comes with 4.01 fw, I don't even know if it's flying, weather has been shitty anytime I had a chance to fly it... (but it's turning on :slightly_smiling_face: )
[2017-12-21 23:23:32]
0bswervant :
Mine came with the same fw, :slightly_frowning_face:
[2017-12-23 21:00:12]
p :
Does anyone know how I can tell if my Spark is in CE or FCC mode without attempting 500m+ test flights?
[2017-12-24 03:53:40]
b3he8iyzieybdamf :
@p search the logs in ...sdcard/DJI/dji.go.v4/LOG/CACHE/areacode/
[2017-12-24 09:30:16]
p :
@b3he8iyzieybdamf any idea for iOS?
[2017-12-24 09:48:40]
b3he8iyzieybdamf :
@p sorry no
[2017-12-24 10:11:19]
p :
@b3he8iyzieybdamf I've located some files, seem to be .dat files in a binary format. Is that what I'm after?
[2017-12-24 10:28:06]
p :
Can open them in the Assist Flight Viewer, but nothing under "Flight Data" seems to indicate CE vs FCC
[2017-12-24 10:45:47]
b3he8iyzieybdamf :
for android they are txt files when you see ac=US you are in FCC otherwise you are in CE ex: ac=GR, ac=DE .... etc
[2017-12-24 10:46:24]
p :
Thanks, will do some grep-ing for 'ac='
[2017-12-24 20:52:50]
ben_lin :
@p on the wiki there is tutorial to force FCC on iOS Go 4 for up to v4.1.14
[2017-12-25 06:03:29]
spammagnet77 :
so I removed the flight restriction on my Mavic via the parameter settings but what about the restriction in DJI Go? I tested today with it set to 120m and the app wouldn't let me go higher. If I set it to 500m, (the max in the app), will it enforce that limit as well? I don;'t need a modded Go app as well right?
[2017-12-25 06:05:14]
ben_lin :
u do not need a modded app for that
[2017-12-25 06:05:22]
ben_lin :
if you changed the correct parameters
[2017-12-25 06:05:34]
ben_lin :
the in-app restriction should not apply
[2017-12-25 06:05:47]
ben_lin :
what firmware are you on
[2017-12-25 06:06:02]
spammagnet77 :
so the 120m in-app restriction shouldn't have done anything?
[2017-12-25 06:06:06]
ben_lin :
no
[2017-12-25 06:06:09]
spammagnet77 :
I'm on .0700
[2017-12-25 06:06:33]
ben_lin :
digdat0 has made a video on this
[2017-12-25 06:06:39]
ben_lin :
go check it out and come back
[2017-12-25 06:06:54]
spammagnet77 :
I'll have to double check my params then, maybe the settings I did didn't stick
[2017-12-25 06:07:14]
ben_lin :
yep
[2017-12-25 06:07:18]
spammagnet77 :
because the app didn't let me go over 120m for sure
[2017-12-25 06:07:33]
ben_lin :
are u on newest app?
[2017-12-25 06:07:41]
spammagnet77 :
4.1.18 I think
[2017-12-25 06:07:44]
ben_lin :
eh
[2017-12-25 06:07:50]
ben_lin :
try older versions
[2017-12-25 06:07:58]
ben_lin :
like 4.1.14
[2017-12-25 06:08:07]
ben_lin :
if that fails u need to check params
[2017-12-25 06:08:33]
spammagnet77 :
yeah I've been meaning to rollback the app but I'm on iOS and it looks like a big pain in the ass
[2017-12-25 06:08:50]
ben_lin :
because at least on my modded 4.1.14, the in-app height limit is overriden by modded parameters on mavic
[2017-12-25 06:08:53]
ben_lin :
yeah
[2017-12-25 06:08:54]
spammagnet77 :
I have the latest iTunes installed unfortunately
[2017-12-25 06:08:55]
ben_lin :
ios is painful
[2017-12-25 06:09:11]
ben_lin :
do a clean wipe of it and put older itunes
[2017-12-25 06:09:20]
ben_lin :
you might as well get a cheap android for this
[2017-12-25 06:09:39]
ben_lin :
the go app sends a lot of your data to some unkown chinese servers
[2017-12-25 06:09:52]
spammagnet77 :
yeah that's a good point
[2017-12-25 06:10:05]
ben_lin :
The OGs here are cracking the iOS app now but it would take quite a while
[2017-12-25 06:11:15]
spammagnet77 :
cool thanks for your help. Right now I'm guessing I don't have the parameters right or the settings I put in didn't stick
[2017-12-25 06:11:30]
spammagnet77 :
I'll check it out
[2017-12-25 06:11:36]
ben_lin :
let me find the digdat video
[2017-12-25 06:11:48]
spammagnet77 :
I've watched it
[2017-12-25 06:11:58]
ben_lin :
k
[2017-12-25 06:12:54]
ben_lin :
btw you cant even fly with .700 fw in china
[2017-12-25 06:13:22]
spammagnet77 :
really? is that new?
[2017-12-25 06:13:40]
ben_lin :
no, it happened in June
[2017-12-25 06:13:54]
spammagnet77 :
I've been worried about the app locking my mavic
[2017-12-25 06:14:27]
ben_lin :
you dont have to
[2017-12-25 06:14:37]
ben_lin :
the DUMLdore tool can unlock it
[2017-12-25 06:14:42]
ben_lin :
with a single click
[2017-12-25 06:15:31]
spammagnet77 :
yeah I got DUMLdore installed and I used that to rollback
[2017-12-25 06:15:51]
ben_lin :
it is magic
[2017-12-25 06:16:10]
spammagnet77 :
and then I set the debug mode on Assistant and set these params: g_config_flying_limit_height_limit_enabled = 2
g_config_flying_limit_limit_height_abs_without_gps = 3000
g_config_flying_limit_limit_height_abs = 3000
g_config_flying_limit_limit_height_rel = 3000
[2017-12-25 06:16:23]
spammagnet77 :
so I thought I was good
[2017-12-25 06:16:36]
ben_lin :
wasnt that the only 4 you need to change?
[2017-12-25 06:16:42]
spammagnet77 :
but yeah it didn't let me go over the in-app limit of 120m
[2017-12-25 06:16:46]
lolo780 :
Does setting 3000 limit you to 3000m?
[2017-12-25 06:16:55]
lolo780 :
I always set those to 99999
[2017-12-25 06:17:31]
spammagnet77 :
yeah I could go higher but I don't plan on going higher than 3000m
[2017-12-25 06:18:11]
lolo780 :
Just wondering if height enabled = 2 overrides all other numbers
[2017-12-25 06:18:12]
ben_lin :
beyond 1000 is dangerous
[2017-12-25 06:18:20]
ben_lin :
no
[2017-12-25 06:18:25]
ben_lin :
2 is the correct value
[2017-12-25 06:19:37]
spammagnet77 :
yeah I don't even really want to go that high above ground level, I just want to climb up into this canyon which goes up like 1000m
[2017-12-25 06:20:37]
spammagnet77 :
and I was trying to test it out before I get out there
[2017-12-25 06:21:12]
ben_lin :
i can tell u that, on my P4P, I set the params to 2999meters and left the in-app at 120
[2017-12-25 06:21:19]
spammagnet77 :
but if it is enforcing the height restriction set in the app I guess it won't work
[2017-12-25 06:21:27]
ben_lin :
and my P4P goes 1000m easily under that config
[2017-12-25 06:21:41]
ben_lin :
i am using modded 4.1.14
[2017-12-25 06:21:49]
ben_lin :
rollback ur app
[2017-12-25 06:21:52]
ben_lin :
and see if works
[2017-12-25 06:21:53]
spammagnet77 :
yeah that's good to know. I think I haven't removed the restriction then
[2017-12-25 06:22:30]
ben_lin :
1.check params. 2.test 3if fail rollback, or get android
[2017-12-25 06:23:02]
ben_lin :
also national parks in the US sometimes can be NFZ
[2017-12-25 06:23:33]
spammagnet77 :
yeah they are but I heard that DJI doesn't enforce those
[2017-12-25 06:23:51]
ben_lin :
i meant in app nfz
[2017-12-25 06:24:01]
ben_lin :
the nfz system is a fucking mess
[2017-12-25 06:24:11]
ben_lin :
especially when u are flying close to one
[2017-12-25 06:24:36]
spammagnet77 :
oh man, well I guess I'll find out. I'm gonna be in a National Park as well
[2017-12-25 06:24:48]
ben_lin :
better off get an android and use the modded 4.1.14 plus modded fw
[2017-12-25 06:24:49]
spammagnet77 :
but that canyon is not in it
[2017-12-25 06:24:54]
ben_lin :
done with dji bullshit once and for all
[2017-12-25 06:25:09]
spammagnet77 :
yeah that is BS
[2017-12-25 06:25:12]
ben_lin :
well u cant land or take off in national parks
[2017-12-25 06:25:15]
ben_lin :
u can fly over it
[2017-12-25 06:25:33]
spammagnet77 :
by law, or you mean that DJI Go enforces it?
[2017-12-25 06:25:41]
ben_lin :
by law
[2017-12-25 06:26:46]
spammagnet77 :
yeah, I want to do so low altitude stuff in a remote part of Death Valley where there really is nobody around
[2017-12-25 06:27:16]
ben_lin :
should be fine then
[2017-12-25 06:27:20]
spammagnet77 :
I don't want to disturb anybody that's for sure
[2017-12-25 06:27:34]
ben_lin :
if you got the money, look into crystalsky
[2017-12-25 06:27:52]
spammagnet77 :
that's an app to fly the Mavic?
[2017-12-25 06:28:03]
ben_lin :
no, it is a monitor for the mavic
[2017-12-25 06:28:09]
ben_lin :
very expensive but useful
[2017-12-25 06:28:24]
spammagnet77 :
oh interesting. I'll check it out
[2017-12-25 06:28:36]
ben_lin :
yeah, u can also use it with other dji stuff
[2017-12-25 06:28:59]
ben_lin :
was thinking about getting one but amazon shipped me a P4P+ when i ordered a P4P
[2017-12-25 06:29:42]
spammagnet77 :
it doesn't work with the P4P+?
[2017-12-25 06:30:04]
ben_lin :
no.. the P4P+ gives u a RC with a built in screen
[2017-12-25 06:30:21]
ben_lin :
P4P comes with regular rc
[2017-12-25 06:30:46]
spammagnet77 :
ahh ok
[2017-12-27 18:23:04]
racin8de :
Not to interrupt, did you make sure you hit Enter after entering the new parameter numbers?
[2017-12-27 18:25:54]
ben_lin :
you need to
[2017-12-29 02:47:22]
andrwho25 :
curious on how transmitter to drone works. Why is it that we only need to modify the transmitter to improve the range? Doesn’t the video come from the drone, ie be broadcasted from the drone, and the transmitter needs to pick it up ? IE, if we increase the radio power, we can simply have better connection to send controls (but downstream video is always diminishing)
[2017-12-29 10:33:48]
ralim :
@andrwho25 I believe the transmitter tells the drone what mode to use
[2017-12-29 21:00:05]
dji-rev-slack :
Drone collides with US Army helicopter, puts 1.5“ dent in rotor - Ars Technica<https://apple.news/AEwUckXDpQyCe4Mxw6WG39w>
[2017-12-29 21:12:55]
dji-rev-slack :
I’m wondering who’s going to be responsible for the damages.
[2017-12-29 21:59:49]
marlasr :
i am wondering what heli is doing at 300 feet
[2017-12-29 22:00:03]
marlasr :
if not landing
[2017-12-30 00:55:43]
wesleymiller :
They are all reporting the drone pilot was at fault. My issue is the heli pilot was not flying 500 feet above the nearest visible object himself and if he had been following his own set of guidelines then the incident would not have happened. Makes sense why trump made registration a law via executive action, the FAA spun it in their favor and let the pilot of the heli off easy.
[2017-12-30 01:02:13]
lolo780 :
Wasn't there a TFR in place?
[2017-12-30 01:02:43]
nocommie :
IIRC, the heli had approval for that location and altitude
[2017-12-30 01:07:45]
wesleymiller :
TFR aside this is the perfect storm to attack hobbyists through demonizing someone who isn't even representative of the community as such. We all get lumped in with this drone pilot. There should at least be fair and balanced reporting on it that says under normal conditions this would not have happened.
[2017-12-30 03:13:21]
dji-rev-slack :
It's just like how they attacked speeders. Now the usual narrative from the pundits after every accident is, "s/he was probably going a little too fast," without knowing the actual causes.
[2017-12-30 20:17:19]
andrwho25 :
is there anything wrong with dji go 4.1.3? seems like i can’t use NLD without it on iOS
[2017-12-30 21:37:36]
jonathan.filippi :
!apk
[2017-12-30 21:56:43]
djislack :
Anyone know if there it is typical that a Samsung Galaxy 4s would not want to connect to the remote via OTG
[2017-12-30 21:57:01]
djislack :
(wifi connects, but I thought OTG was recommended)
[2017-12-30 21:59:43]
djislack :
After reading some posts, I suspect it might be because of an older Android v
[2017-12-30 21:59:56]
djislack :
will check tonight and update here for others to benefit from
[2017-12-31 07:40:47]
kilrah :
nothing wrong with 4.1.3, been using it for months, only switched to 4.1.14 last week
[2017-12-31 07:41:48]
kilrah :
@djislack dunno, my s4 is running a custom rom... but it's unusably slow for GO4 anyway.
[2017-12-31 07:42:39]
kilrah :
was one of my favorite phones (thin and light) but was before the big jump in SoC performance...
[2017-12-31 17:43:04]
djislack :
thanks!
[2018-01-04 06:43:54]
jcarlo :
So I flashed fireworkstar(renamed djisystem) DUMLdore gave me a message red herring is good(something like that) reboot. So I did but I don't see the Mavic showing on Windows 10. Am I missing something?
[2018-01-04 06:44:34]
jezzab :
So you couldnt see it with `adb devices`?
[2018-01-04 06:44:47]
jezzab :
What firmware?
[2018-01-04 06:46:01]
jezzab :
btw you dont need to rename the fireworks.tar. DUMLdore will load any name. Just it filters the file names. Have to go to the filename box and type `*.*` and hit enter. Like most programs that filter
[2018-01-04 06:51:17]
jcarlo :
400
[2018-01-04 06:51:30]
jezzab :
And you ran `adb devices`?
[2018-01-04 06:51:35]
jezzab :
And it shows nothing?
[2018-01-04 06:54:59]
jcarlo :
I didn't ran anything after reboot
[2018-01-04 06:55:10]
jezzab :
umm
[2018-01-04 06:55:40]
jezzab :
You know that root enables ADB. and then you can access via adb shell?
[2018-01-04 06:55:54]
jezzab :
then you are in a linux type shell from the command line and can do anything?
[2018-01-04 06:56:07]
jezzab :
Doesnt just pop up like a drive or anything
[2018-01-04 06:56:29]
jcarlo :
That's what I thought that it would just pop up
[2018-01-04 06:56:35]
jezzab :
Yeah nah
[2018-01-04 06:56:58]
jcarlo :
I did switch to ubuntu after reboot
[2018-01-04 06:57:08]
jezzab :
You can do it Win10 easy mate
[2018-01-04 06:57:13]
jezzab :
I do it allllll the time in Win10
[2018-01-04 16:51:53]
mostriciattola87 :
Hi guys, completly new and noob here and I got my MPP right now..so I was wondering what mistake I don't want to do while setting it up for my first flight?
[2018-01-04 16:55:28]
mostriciattola87 :
I read a lot about updating and I got really confused lol, this is my first drone. I am pretty sure I would like to hack my MP in the near future because privacy rules of dji and because I also would like to own all the feature i buyed..even if I maybe don't use it :
[2018-01-04 16:55:33]
mostriciattola87 :
:slightly_smiling_face:
[2018-01-04 17:18:23]
nocommie :
Not much you have to worry about that can't be reversed now. Just fly it and get used to it. There are many "normal" mavic forums out there to get general tips on. Come here when you are confident flying and have run into issues with DJI trying to prevent you from using your property the way you want. In the mean time read the !wiki
[2018-01-04 23:34:35]
mostriciattola87 :
thank you nocommie, I didn't know where I was right to question so I put the question in general too, thank you for your answer!
[2018-01-05 09:01:48]
bilashid :
Hey guys, another newbie here. How do I telnet (or get an adb root shell) into my Mavic pro's remote controller? The most I can do right now is read and write to /ftp. The controller is on firmware V01.03.0550. It accepts connection on port 23 (telnet) but immediately resets it.
[2018-01-05 09:04:53]
kilrah :
for 550 <https://dji.retroroms.info/howto/pyduml>
[2018-01-05 09:04:56]
kilrah :
!wiki
[2018-01-05 09:14:06]
bilashid :
ok, so I can just proceed with step 6. Rooting (no need to flash older firm), correct?
[2018-01-05 09:19:42]
bilashid :
so basically all I have to do is flash fireworks.tar correct? Can I do it with DUMLdore?
[2018-01-05 09:21:59]
bilashid :
and everything in fireworks.tar/symlink/grep will get executed as root?
[2018-01-05 09:34:51]
kilrah :
yup
[2018-01-05 09:37:04]
bilashid :
cool, thanks
[2018-01-05 09:37:50]
bilashid :
any reason to update to a higher firmware, or is it better to just stay on 550?
[2018-01-05 09:43:06]
kilrah :
usually people use either 400 or 700, the ones in between had known issues mainly when using 3rd party apps
[2018-01-05 09:47:07]
bilashid :
thanks. is there any place where I can read details about the various fw differences? Also, is Litchi the best app to use for controlling, or is there something better / more open?
[2018-01-05 09:50:43]
kilrah :
dunno of one, and i only use modded GO4 personally
[2018-01-05 09:53:49]
bilashid :
cool, thanks for the help :slightly_smiling_face:
[2018-01-05 17:39:11]
ben_lin :
!wiki
[2018-01-07 00:18:22]
dji-rev-slack :
yay! new mpp just arrived with 4.0000-
[2018-01-07 00:18:36]
dji-rev-slack :
downgrading to 3.0100 and then upgrade to 3.0700
[2018-01-07 02:49:00]
bilashid :
is there already an established method of bypassing assistant2 login?
[2018-01-07 02:56:19]
arrvodesign :
@bilashid I keep the dev window open, then inspect element on the parent html tag then delete it
[2018-01-07 02:57:37]
dji-rev-slack :
Login verification might be removable from the source.
[2018-01-07 02:58:37]
jezzab :
The login is used for the various DJI APIs to load the correct firmwares available for you from their servers. For example if you are in the Beta program then it will load those fw as well
[2018-01-07 03:00:24]
arrvodesign :
@jezzab i wish there is a beta for Mac, I have one for windows but on VirtualBox its not running ... Not recognizing USB connected Mavic, but DUML does see it
[2018-01-07 03:03:59]
jezzab :
The beta firmwares show in all versions mate. Your username is used to retrieve the list from the servers. So it sends that to the servers and the servers send back the list and links of ones you can download/apply
[2018-01-07 03:04:17]
jezzab :
Also means they can punch people in and out of the program on their end
[2018-01-07 03:06:13]
bilashid :
@arrvodesign which tag do you delete, "pop-box login-box"? I can't get past the 'connected devices' page without logging in
[2018-01-07 03:06:38]
arrvodesign :
My bigger concern was if the beta is safer to use than the standard Assistant 2 when online
[2018-01-07 03:07:17]
arrvodesign :
@bilashid did you connect remote or the bird?
[2018-01-07 03:07:49]
arrvodesign :
When connecting remote it's impossible to get in without login as far as I remember
[2018-01-07 03:08:00]
bilashid :
@arrvodesign remote, let me try with the bird
[2018-01-07 03:08:46]
arrvodesign :
For update purpose I suggest to use DUML instead of Assistant
[2018-01-07 03:09:06]
arrvodesign :
Assistant will work offline for the bird
[2018-01-07 03:09:47]
bilashid :
@arrvodesign it works! that was easy, thanks :slightly_smiling_face:
[2018-01-07 03:10:08]
bilashid :
yeah, i have no intention of updating with assistant, just looking at flight logs GUI and such
[2018-01-07 08:17:38]
kilrah :
For parameter edit I have a VM in which I've logged into the assistant once (with no device connected) then cut the network connection.
[2018-01-07 09:35:34]
jezzab :
Ill take a guess and you have a newer mavic and you have gone back to a fw earlier then .1000
[2018-01-07 09:35:36]
jezzab :
<https://dji.retroroms.info/howto/recorder-sdcard-fix>
[2018-01-07 09:48:38]
dji-rev-slack :
Got it. The older fc uses the on board sd card as recorder.
[2018-01-07 09:49:09]
dji-rev-slack :
I have a MPP.
[2018-01-07 09:49:14]
dji-rev-slack :
That's why.
[2018-01-08 08:16:28]
dji-rev-slack :
Got the SD Card in. :slightly_smiling_face:
[2018-01-09 14:58:04]
jurek.olden :
Hello folks, a quick question: i am planning on buying a DJI spark, will i be able to lift the power transmission limitations for the rc? if so, i would order it now and figure the how out later
[2018-01-09 14:58:56]
jurek.olden :
i read most of the github readmes as well as wiki and forum entries, but i am unsure if the methods mentioned still work now
[2018-01-09 14:59:13]
jurek.olden :
and i would not want to be stuck with half the product after buying
[2018-01-09 15:09:01]
kilrah :
you can currently flash spark with any previous firmware.
[2018-01-09 15:14:26]
jurek.olden :
my understanding was that you have to either downgrade the android app or recompile it
[2018-01-09 15:14:37]
jurek.olden :
is that not correct ?
[2018-01-09 15:14:48]
jurek.olden :
thanks for your answer @kilrah
[2018-01-09 15:15:43]
kilrah :
that is correct
[2018-01-09 15:17:43]
jurek.olden :
and this still works i take it. thanks for your help :+1:
[2018-01-09 17:11:07]
flyingkite :
Hey folks, is there a write up on how to upgrade or downgrade the spark remote? The remote is not like the mavic remote where you can connect via usb and flash firmware.
[2018-01-09 18:02:25]
haloweenhamster :
don't you just connect RC to PC via wifi & use DUMLdore
[2018-01-09 18:36:55]
flyingkite :
So basically connect pc to RC as if it were a wifi access point?
[2018-01-09 20:31:55]
kilrah :
yup
[2018-01-09 21:12:37]
neilwtaylor :
Hi all, just new. I am about to "improve" the altitude/speed ability of my P3P. I use missions created using Lichti's mission hub. Just tried to export a simple csv, mod the altitude of a wp beyond the usual limit, but re-import with such values is disallowed. Any direction on how to build/mod missions using "improved" altitude/speed values? Thanks!!!
[2018-01-10 18:27:10]
brian964 :
For the Mavic: Could I just modify /vendor/bin/<bleh>_check.sh after remount to add commands?
I tried adding
```
/system/xbin/busybox nohup /system/xbin/busybox nc -llp 1337 -e /system/bin/sh
```
and nothing comes up after reboot... not even adb.
Had to re-run DUMLracer to get adb back
[2018-01-10 18:34:09]
kilrah :
not on recent fw anymore, there's a checksum validation - any difference and the original gets restored
[2018-01-10 18:57:22]
brian964 :
?
What about DUMLracer?
[2018-01-10 18:59:05]
brian964 :
Then where is a place I can injection a command?
[2018-01-10 19:02:22]
brian964 :
oh is that what
```
/system/bin/rm /data/upgrade/backup/*.cfg.sig
```
does?
[2018-01-11 11:02:37]
chucken1 :
Is it possible to have two versions of dji GO on one IOS unit? I would like to have an old version like 4.1.12 so I can you use the .dji.configs file and new version for the new flight modes :slightly_smiling_face:
[2018-01-11 11:05:22]
haloweenhamster :
~ios_ipa_reversing maybe able to help
[2018-01-11 11:06:13]
haloweenhamster :
Probably just involves changing the package name
[2018-01-11 11:06:42]
haloweenhamster :
don't use ios so maybe / probably wrong
[2018-01-11 11:58:43]
chucken1 :
@haloweenhamster Ok I try over there
[2018-01-11 22:08:47]
jcarlo :
Click on text
[2018-01-11 22:09:26]
jcarlo :
Lol I was just doing Charles proxy earlier too
[2018-01-12 00:36:23]
jcase :
@kilrah there is no check on /vendor/bin, that is how i persist with the racer exploit
[2018-01-12 09:59:23]
chucken1 :
@jcarlo When I click text I only get a empty window. But I will try with another computer :wink:
[2018-01-12 15:46:48]
djislack :
I want to remove nfz from a spark - I believe that the .300 firmware and a patched APK for android are the way to do it - right?
[2018-01-12 15:51:14]
nocommie :
Read the faq on the !wiki
[2018-01-12 16:36:16]
djislack :
@nocommie Thanks, I read through everything I could get my hands on for the past couple of days and this was the understanding that I came to, just looking for a second opinion.
[2018-01-12 16:36:49]
djislack :
(also, since it is Spark - I don't know hoe much is different)
[2018-01-12 16:36:50]
nocommie :
The way you mentioned is one way yes.
[2018-01-12 16:36:55]
djislack :
k
[2018-01-12 16:42:41]
djislack :
do you think I should keep looking
[2018-01-12 16:50:15]
djislack :
Optimally I would do the work required to be able to use this with a newer version - the issue that I am working on is that I am always in a nfz that was drawn completelyincorrectly and the option does not exist to unlock.
[2018-01-13 17:50:57]
djislack :
Used DUMLdore to downgrade spark to .300
[2018-01-13 17:51:10]
djislack :
now shows up as composite device
[2018-01-13 17:51:21]
djislack :
assistant does not react when plugging it in
[2018-01-13 17:51:36]
djislack :
wondering if maybe I just need to be more patient
[2018-01-13 17:52:53]
djislack :
This does come up in Device manager
[2018-01-13 18:07:09]
djislack :
I turned my spark into a gadget device :confused:
[2018-01-13 18:08:37]
djislack :
It is currently alternating between blinking yellow lights on the back and then red and then blinking lights on the back and then red. The front lights are just red
[2018-01-14 11:04:32]
djislack :
Got my spark updated with mixed modules by following <http://dji.retroroms.info/howto/modulemix>
[2018-01-14 11:05:14]
djislack :
Now trying to figure out how to get NFZ out of the go app if anybody has some tips
[2018-01-14 11:05:32]
djislack :
(am on the edge of a poorly drawn nfz
[2018-01-14 11:05:34]
djislack :
)
[2018-01-14 11:23:06]
spiteri.michael :
It really beats me why they have to do this shit.
[2018-01-14 11:23:44]
spiteri.michael :
There are so many other drones as well as all the diy stuff that has none of the programmed limitations that dji enforces.
[2018-01-14 11:25:36]
spiteri.michael :
hell, the car I bought can do well over 150kph, but the fastest we are allowed to go is 110. My car is not forced to do the spped limit in what ever speed zone I am in, I just choose to do it, most of the time...
[2018-01-14 14:26:41]
nocommie :
As I said previously; What they are doing is not required by any law and is not an industry standard. They figured they would have all the worlds governments falling over themselves to give DJI millions for this great development. It backfired but they just can't let go of the dream. Again, FUCK DJI. Their hardware is great, their software has potential (when it works correctly).
[2018-01-14 14:38:11]
kilrah :
just business.. they can currently afford to overprotect themselves
[2018-01-14 14:38:28]
kilrah :
hopefully will change soon with recent competitors' announcements...
[2018-01-14 19:25:20]
djislack :
so, do I need to do anything on the go 4.1.13 app or is all the nfz in the aC?
[2018-01-16 05:52:11]
flyingkite :
I'm going to be flashing my spark with 305,306 and 905 removed. I'm currently on .300 and will be flashing to .701 using DUMLdore. Do I need to flash every firmware or can I go from .300 to .701?
[2018-01-16 05:55:20]
wesleymiller :
I have a mavic but i'd assume if things are the same to just go straight to 701, the dji system is modular so if you want the 701 modules then that would be the choice.
[2018-01-16 05:56:04]
wesleymiller :
maybe someone with a spark can chime in. that's what i'd do though.
[2018-01-16 15:20:51]
djislack :
I see that 4.1.13 still nags if I am in a (incorrectly drawn) nfz
[2018-01-16 15:21:33]
djislack :
the AC has mixed modules and assistant params
[2018-01-16 15:21:59]
djislack :
@chucken1 :hushed:
[2018-01-16 15:56:44]
djislack :
Flies though
[2018-01-16 15:57:02]
djislack :
I wonder if I need to wipe the android and try again
[2018-01-16 15:57:22]
djislack :
maybe it left a folder somewhere from the 4.1.14 ver
[2018-01-16 15:57:42]
djislack :
I did do 'clear app data' before uninstalling the newer apk
[2018-01-16 15:57:44]
djislack :
oh well
[2018-01-17 10:02:15]
christophe :
If the 905 module was every installed, it will give warnings, but will fly
[2018-01-17 10:02:28]
christophe :
you can disable warnings in the app
[2018-01-17 10:02:36]
christophe :
ever*
[2018-01-17 20:41:10]
sdeakin1466 :
I'm trying to mix module a Spark, getting 0300 installed using is DUMLdore has worked but it keeps failing trying to install 0701 with and removed, it either refuses to load the FW into DUMLdore or fails part way through uploading the modded 0701 FW. If I resort to DJI assistant and reinstall the full 0701 version it works every time so all comms etc seems to work? Anyone help? Cheers
[2018-01-17 20:43:05]
sdeakin1466 :
Sorry.... It should say with "305" and "306" modules removed but the original post didn't include this
[2018-01-17 20:54:40]
jezzab :
Two different issues there. Failing to load the file, could be corrupt or wrong format
[2018-01-17 21:00:02]
jezzab :
No flashing software actually does the upgrade. The file gets put on the aircraft and then it’s just told to upgrade (simply) then it’s all on the aircraft and technically it could be unplugged from USB and left to upgrade.
If the file isn’t made correctly then the aircraft will reject it
[2018-01-17 21:44:46]
sdeakin1466 :
Thank you for replying, apologies for my lack of understanding.
I downloaded the 0300 and 0701 bin from github and used 7zip to remove 305 and 306 from 0701, then DUMLdore to load and then flash them? Opened DJI assistant to view the progress and it just stayed at 12% until the Spark battery was nearly flat (Not long - 10 mins, was fully charged) I tried again but it seems now that DUMLdore won't load any FW 0300, 0600, 0701 or 0900 (All from Github) It just does nothing when I select a FW bin, no status bar or any activity?
[2018-01-17 21:49:12]
sdeakin1466 :
Could there be a complication that the Spark becomes 'locked' once the 0300 FW is loaded? I get all 4 LED's showing solid RED just the same as I did before when I first got the spark and it was supplied with 0500 before I used assistant to upgrade to 0900 and unlock it?
[2018-01-17 21:49:37]
jezzab :
Locked is locked from flying, not flashing. And this happens on .300
[2018-01-17 21:49:48]
jezzab :
You are saying you cant even open a file with DUMLdore
[2018-01-17 22:00:47]
sdeakin1466 :
Yes, I run DUMLdore, press load firmware and it just doesn't move from there, the DUMLdore screen shows "Device found on COM3" in the lower half as though it is connected but nothing happens, I have tried numerous bin files but always the same nothing happens, no status bar activity.
[2018-01-17 22:01:07]
kilrah :
it's not supposed to do anything after loading... you then click flash.
[2018-01-17 22:01:43]
kilrah :
if you connect to the online app with FW300 then yes your aircraft will be locked straight away.
[2018-01-17 22:02:30]
sdeakin1466 :
When I click flash I get "Unhandled exception has occurred in your application..."
[2018-01-17 22:02:44]
jezzab :
Sounds like you have Windows problems mate
[2018-01-17 22:03:05]
jezzab :
<https://github.com/jezzab/DUMLdore/releases>
[2018-01-17 22:03:17]
jezzab :
Download the zip file there. Unzip it on your Desktop
[2018-01-17 22:03:29]
jezzab :
Run as Admin (not always needed but wont hurt)
[2018-01-17 22:04:28]
sdeakin1466 :
Is there any cache or any other area I need to make sure is clear before I unzip another DUMLdore
[2018-01-17 22:04:36]
jezzab :
Nope
[2018-01-17 22:04:41]
jezzab :
its stand alone
[2018-01-17 22:07:31]
sdeakin1466 :
OK, thank you very much for your help I'll try again, I know it must be frustrating when people who are not programming literate use these tools
[2018-01-17 22:08:10]
jezzab :
Second option is to use NLD
[2018-01-17 22:08:12]
jezzab :
<https://nolimitdronez.com/>
[2018-01-17 22:08:21]
jezzab :
Not free but very n00b friendly plus they have support
[2018-01-17 22:26:15]
sdeakin1466 :
Thanks for your help I tried again, restarted my laptop, unzipped the linked DUMLdore but I get the same issue. It's strange as I have had 2 occasions now where I was able to load the 0300 FW (same bin file each time) where the lower green status bar moved across as it 'loaded' but now there is never any status bar activity and the same "Unhandled exception has occurred in your application..." error if I wait a while (in the hope that it has loaded the bin file) after 'loading' any bin file and click "Flash Firmware"
[2018-01-17 22:27:28]
jezzab :
The percentage bar will never move when you load a file
[2018-01-17 22:27:37]
jezzab :
only when you FLASH a file
[2018-01-17 22:28:10]
jezzab :
And what was the unhandled exception?
[2018-01-17 22:37:18]
sdeakin1466 :
Sorry I must have mis-remembered when the percentage bar was active
I'll copy the exception error details and post them here, could I be trying to flash the FW before it is fully loaded?
[2018-01-17 22:46:13]
sdeakin1466 :
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.UnauthorizedAccessException: Access to the port 'COM3' is denied.
at System.IO.Ports.InternalResources.WinIOError(Int32 errorCode, String str)
at System.IO.Ports.SerialStream..ctor(String portName, Int32 baudRate, Parity parity, Int32 dataBits, StopBits stopBits, Int32 readTimeout, Int32 writeTimeout, Handshake handshake, Boolean dtrEnable, Boolean rtsEnable, Boolean discardNull, Byte parityReplace)
at System.IO.Ports.SerialPort.Open()
at DUMLdore.Form1.btnFlashFW_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
[2018-01-17 22:48:57]
sdeakin1466 :
I have just managed to load 0300 again (after several attempts) but keep getting this same error when I try to load the modded 0701 FW (305 and 306 deleted in 7zip)
[2018-01-17 23:38:59]
djislack :
Which OS
[2018-01-17 23:39:12]
djislack :
are you loading from
[2018-01-18 06:05:00]
sdeakin1466 :
Win 7 Enterprise SP1
[2018-01-18 07:16:34]
kilrah :
Something in your OS is not allowing DUMLdore access to the serial port. Never used enterprise versions, but there are likely tighter security settings that could cause that. Afraid you'll have to figure out or use another PC with a "normal" version...
[2018-01-18 07:16:53]
kilrah :
Just to check, you closed dji assistant before trying to use dumldore, right?
[2018-01-18 15:28:11]
sdeakin1466 :
Yeah I followed digdato's Youtube video, assistant is off when I press 'Flash firmware'
Just to help me understand a little more as to why we open DJI assistant? does this establish comms with the Spark which DUMLdore then uses?
[2018-01-18 17:52:36]
kilrah :
You don't need to. You may open it after you started flashing in order to see progress % but it isn't necessary.
[2018-01-18 18:21:31]
sdeakin1466 :
Yeah I did that too, opened it after the flashing started, it's when I saw it just stuck at 12% while trying to load the modded 0701 so I went back to a clean 0300 and tried again
[2018-01-18 18:30:21]
quad808 :
Make sure you let it sit. Just because it looks like it's "stuck" doesn't mean it is, and you run the risk of bricking if you stop the process. It takes about 15 minutes for the flash to complete. One way to check is...if the lights are flashing like normal, and you can connect to it with the RC and GO...then you know it isn't flashing anymore. The tail lights will flash in standby mode. On other thing. Even if you get a flash failed message during the flash, doesn't mean the whole flash failed. This is due to missing modules. Let it sit.
[2018-01-18 18:41:40]
sdeakin1466 :
Thanks for the feedback
The problem is the Spark battery just runs out so quickly and there is nothing I can do about it, after a few failed attempts at flashing and then another go at flashing the 0701 and the battery is soon flashing at 25% and below so it's possible that I just ran out of battery after a few goes and I ended up with a part installed 0701 FW? - 'bricked'? I left it until the battery was on verge of expiring and still showed 12% DJI assistant progress before I stopped. there is no way to continue charging or hot swapping the battery so I had to stop.
[2018-01-18 20:17:33]
lolo780 :
You can take the lid off the spark, unplug the fan and use an external fan to cool it. That'll extend the battery life.
[2018-01-19 18:41:14]
acorchia :
any idea about why 0905 is important not to upload? or does it really matter at all?
[2018-01-19 19:03:57]
jcarlo :
0905 is the NFZ
[2018-01-19 19:04:06]
nocommie :
^
[2018-01-19 19:08:35]
acorchia :
yea, that much I knew, thanks for that guys, but does it matter if i update it or not in the 1.04.0100++ versions?
[2018-01-19 19:33:32]
kilrah :
depends on where you are
[2018-01-19 19:34:07]
kilrah :
for some it doesn't change a thing, for others a zone might have been added in places they fly and either can't fly there anymore or get obnoxious warnings
[2018-01-19 19:37:12]
acorchia :
ah, thanks for the info Kilrah, I thought about the whole lock thing and such.. :slightly_smiling_face:
[2018-01-20 21:06:45]
marlasr :
Does dumldore need to be ran as admin maybe?:)
[2018-01-20 21:07:08]
jcarlo :
I don’t
[2018-01-20 21:07:22]
jcarlo :
What problem are you having?
[2018-01-21 08:41:46]
marlasr :
No problem... Just asking
[2018-01-21 16:02:15]
mikeymcclammy :
Out curiosity will Dumldore work on phantom 3 standard?
[2018-01-21 16:13:03]
kilrah :
nope, completely different architecture
[2018-01-21 16:44:59]
sdeakin1466 :
Thanks for the suggestion, I just kept retrying and eventually the modded 0701 FW wrote to the AC, no idea what was different between the times I tried, but I have flown the bird like this so all seemed well.
A big thank you to you guys who provide these tools and the guidance given, cheers
[2018-01-21 22:01:54]
sebastian :
Hi there. I'm new to the Slack and ahve been reading up as much as I can on the Wiki. I was wondering what the benifits are of running older versions of the GO apps considering Multi-modding the firmware essentially allows you to run the latest firmware but still edit the parameters of older firmware.
[2018-01-21 22:03:31]
nocommie :
Older as in the patchable versions? if so, you can do a lot with patches that you can't do with parameter modding. Like bypassing the login, disabling DJI (cocksuckers) firmware check/forced upgrades etc. You should review the patch descriptions.
[2018-01-21 22:04:18]
sebastian :
Awesome thankyou for the info! I will do :slightly_smiling_face:
[2018-01-22 13:25:51]
christophe :
whoops
[2018-01-22 13:25:54]
christophe :
to alte :smile:
[2018-01-22 13:25:58]
christophe :
late and wrong channel
[2018-01-22 15:47:53]
validat0r :
i've been reading a lot about "fcc hack" for dji spark. which radio settings are being modded here? the RC's? the AC's? both?
[2018-01-23 17:10:01]
dji-rev-slack :
Ac
[2018-01-23 17:11:52]
validat0r :
up to how many mWatt will the AC transmit in FCC mode?
[2018-01-23 17:51:20]
dji-rev-slack :
Us: 45 mW
Gb: 9mW
[2018-01-23 17:54:36]
kilrah :
look at the specs page, it's out now...
[2018-01-23 17:54:52]
kilrah :
and hack is for both
[2018-01-23 17:56:10]
dji-rev-slack :
Is it on !wiki?
[2018-01-23 17:57:19]
kilrah :
official dji spec page...
[2018-01-23 17:57:57]
dji-rev-slack :
I see
[2018-01-23 17:58:03]
validat0r :
I see AC: FCC 25 dBm, CE 18dBm (2,4Ghz)
[2018-01-23 18:01:24]
validat0r :
that translates to FCC 316mW, CE 63 mW
[2018-01-23 18:03:53]
validat0r :
I thought, 100mW was ok in europe .. what am I missing? Why the cut off at 63mW?
[2018-01-23 18:04:44]
kilrah :
18dBm raw TX power + 2dBi antenna = max allowed EIRP of 20dBm/100mW
[2018-01-23 18:05:07]
validat0r :
thx
[2018-01-23 18:13:37]
dji-rev-slack :
@digdat0 mentioned that someone measured the power output with a meter and got 45 and 9 mw.
[2018-01-23 18:16:21]
kilrah :
it's very hard to measure absolute values correctly, so expect most measurements you find to be incorrect. The relative difference between 2 measurements by the same person will likely match, but not the absolute value.
[2018-01-23 18:16:51]
dji-rev-slack :
Ok
[2018-01-23 19:52:53]
digdat0 :
oops, posted this to general. @dji-rev-slack <https://imgur.com/zYwYCN0>
[2018-01-23 19:53:01]
digdat0 :
those are the stock country code powers
[2018-01-23 19:54:09]
kilrah :
yup, as i said that allows you to see what code uses which level, but don't look at the absolute value
he even put "+/-" at the top to signal approximate values
[2018-01-23 19:56:34]
digdat0 :
correct
[2018-01-23 19:57:06]
digdat0 :
[]
for me this was more validating that other countries are in fact wayy limited
[2018-01-23 20:34:10]
validat0r :
Has anyone tried a Y-OTG cable with RC and smartphone to connect an additional USB battery (anker)?
[2018-01-23 20:58:18]
validat0r :
How exactly is the Wifi topology of AC <-> RC <-> smartphone? does the RC act as both, wifi client and accesspoint?
[2018-01-23 21:38:34]
dji-rev-slack :
thx for the clarifications
[2018-01-24 14:36:25]
validat0r :
my spark rc isn't recognized by linux .. don't see anything on dmesg when connecting via usb. any hints?
[2018-01-24 18:23:30]
stgcom :
Hey, anyone care to share Neo seco apk file link
[2018-01-24 18:24:47]
stgcom :
Also, is the iOS Version of Go4 not compatible with a edited param DJI Spark? On fw .300
[2018-01-24 18:26:23]
djislack :
!apk
[2018-01-24 18:26:35]
djislack :
!wiki
[2018-01-24 18:26:40]
djislack :
There ya go!
[2018-01-24 18:26:43]
djislack :
:slightly_smiling_face:
[2018-01-24 18:27:53]
stgcom :
Beautiful guys!
[2018-01-24 18:28:01]
stgcom :
Thanks Ryan
[2018-01-24 18:28:19]
stgcom :
Spark won’t activate on iOS. Is iOS the issue?
[2018-01-24 18:28:32]
stgcom :
I figured it’s because it’s on .300
[2018-01-24 18:29:31]
nocommie :
Try activating with dumldore
[2018-01-24 18:30:21]
nocommie :
!wiki
[2018-01-24 18:30:50]
stgcom :
Tried that. You mean the one speaking about Mavic activation?
[2018-01-24 18:31:36]
stgcom :
I figured it would be worth a shot even tho I have a Spark. Didn’t even move to pretend it was doing anything. Did issue message that activation command sent
[2018-01-24 18:32:13]
stgcom :
I figured I needed to either upgrade to .600 and activate then downgrade back to .300
[2018-01-24 18:32:29]
stgcom :
It’s fresh out the box
[2018-01-24 18:32:53]
stgcom :
I only downgraded to .300 edited params and then tried to fly it for the first time
[2018-01-24 18:33:51]
nocommie :
Hmm, that would be a question for @jezzab I thought it would work for the spark but maybe not.
[2018-01-24 18:41:05]
stgcom :
Do I have to uninstall legit Go4 app before installing Neo APK?
[2018-01-24 18:44:03]
stgcom :
Or will the Neo APK allow me to fly without the need to activate
[2018-01-24 18:46:52]
djislack :
You gotta read through the wiki but, the short answer is - you can run both on the same device with something called apk or app cloner (I forget the name, havent run it)
[2018-01-24 18:47:16]
djislack :
the neo apk by itself has no special functionality
[2018-01-24 18:47:25]
djislack :
it needs to be patched in the way that you want it to be patched
[2018-01-24 18:50:03]
stgcom :
I just wanted to ensure it wasn’t identical identifier as the stock app. I just uninstalled stock just in case
[2018-01-24 19:28:59]
kilrah :
it is by default
[2018-01-24 22:03:03]
zule :
So I'm new to the DJI hacking scene and could use a couple pointers. I have a Mavic I'd like to remove restrictions on (primarily the height limit, but NFZ could be nice also). From what I read it sounds like the best way I understand to do this is to downgrade using the race exploit (jcase, I think I remember you from my unrevoked days. :)) to release 1.03.700 and then upgrade using a modified bin file removing modules 305 and 306? And then of course changes in Assistant as needed. Since I use a ios device will I need to downgrade go4 or can I leave it current? Anything I'm missing, or new developments?
[2018-01-24 22:03:16]
zule :
Would love to help out once I get up to speed.
[2018-01-25 02:11:21]
stgcom :
Do you have a Micro SD Card in the guts of your Mavic? If not you’re out of luck. I found this out the hard way. There are guides somewhere I hear on installing one. I didn’t have the stomach to open my new toy up and void the warranty.
[2018-01-25 02:12:11]
stgcom :
Seems like DJI removed the SD Card on all newer units. Only the ones from when it was initially released have the SD inside already.
[2018-01-25 02:15:37]
stgcom :
So I used the Neo APK for my .300 Spark which let me bypass needing it to be activated like before but it stopped me from launching due to old firmware. I thought the Neo APK was supposed to help with activation and unlock.
Also went to DUMLdore to “Unlock Spark” It acted like it worked and then tried to start up again and nothing. Same restrictions. Can’t launch due to old firmware
[2018-01-25 03:24:18]
sebastian :
I installed an SD card in my Mavic Platinum successfully, though it was a pretty nerve-racking task. I hated the risk of breaking the case.
[2018-01-25 03:26:50]
sebastian :
However: It's not as difficult as it looks. There's not much that can go wrong if you're cautious. If you find you it's just too intimidating you could get a service centre to do it for you. Here's the video I followed: <https://www.youtube.com/watch?v=onT5yljmJT8&feature=youtu.be>
[2018-01-25 03:27:07]
sebastian :
This only removes the top cover and is the easiest method for getting to the SD card slot
[2018-01-25 03:27:52]
nocommie :
And what did you do after? Downgrade? If so, to what version that still supports the plat hardware?
[2018-01-25 03:28:23]
sebastian :
Plat drone is exactly the same as the other Mavics
[2018-01-25 03:28:30]
sebastian :
so I downgraded to .700
[2018-01-25 03:28:39]
sebastian :
then I multi-modded to 1.4.100
[2018-01-25 03:28:54]
nocommie :
i thought there were differences in the ESCs and therefore FW?
[2018-01-25 03:30:09]
sebastian :
Seemed to work fine for me, there might be and I was unaware of that. I preferred the upgrade to 1.4.100 multi-modded anyway so I wasn't on .700 for long
[2018-01-25 03:30:35]
nocommie :
Maybe the FW supports both?
[2018-01-25 03:30:53]
jezzab :
The ESC modules will be skipped
[2018-01-25 03:31:02]
jezzab :
because of version incompatibility
[2018-01-25 03:31:30]
jezzab :
Thats why in the later fw there is doubles of the ESC modules (Plat and Normal) which is selected based on hardware
[2018-01-25 03:32:49]
sebastian :
Ah cool that explains it, thankyou :slightly_smiling_face:
[2018-01-25 03:33:56]
nocommie :
So @jezzab, every firmware for the mavic since the plat was released has both esc files?
[2018-01-25 03:35:35]
jezzab :
Yup
[2018-01-25 03:35:46]
jezzab :
Thats why there is just one firmware for both
[2018-01-25 03:35:59]
nocommie :
cool
[2018-01-25 03:37:05]
jezzab :
the 1200 module there is two
[2018-01-25 03:37:13]
jezzab :
ones got an es02 on the end
[2018-01-25 03:37:20]
jezzab :
Its like the whole camera thing
[2018-01-25 03:37:41]
jezzab :
There is 2 camera modules depending on the hardware revision (60fps/binning fix) modules 0100 and 0101
[2018-01-25 04:04:15]
djislack :
@jezzab Thank you for clarifying that
[2018-01-25 06:14:17]
xchwaw :
If my AC's version is original 1.04.0000,I directly replace 305 and 306 modules in the version of 1.04.0200 using these modules in the version of 1.03.0700,then I get a modified 1.04.0200.If I flash this modified version to the AC,is everthing OK?Can I modify flight parameters in the ASSISTANT 2(1.1.2)?
I'm just not willing to downgrade to 1.03.0700.
[2018-01-25 06:16:43]
jezzab :
When then you cant put .700 modules on there
[2018-01-25 06:22:43]
xchwaw :
I have put the modules into the 1.04.0200 in 7-zip,and get a modified bin file.
[2018-01-25 06:24:27]
jezzab :
Well they wont flash
[2018-01-25 06:24:51]
jezzab :
Only the names you see in the `wm220.cfg.sig` file will flash
[2018-01-25 06:25:11]
jezzab :
Open the `wm220.cfg.sig` file in a text editor
[2018-01-25 06:25:14]
jezzab :
look at the names
[2018-01-25 06:34:19]
xchwaw :
Get it.Firstly the file name can't be matched in the wm220.cfg.sig,secondly MD5.So can't do it like this.
[2018-01-25 06:34:31]
xchwaw :
Thanks!
[2018-01-25 06:35:00]
jezzab :
It will ONLY flash what is in the `.cfg.sig` file. And yes its signed (thats what the garbage is at the top of the file) so the file cannot be changed
[2018-01-25 06:35:10]
jezzab :
So you need to do 2 passes
[2018-01-25 06:35:15]
jezzab :
.0700 FC
[2018-01-25 06:35:24]
jezzab :
.0200 The rest without FC
[2018-01-25 06:35:47]
jezzab :
as per all the wikis and threads and stuff. There is a reason why you have to do the .700 bud
[2018-01-25 06:35:50]
jezzab :
Goodluck!
[2018-01-25 06:43:39]
xchwaw :
So downgrading to 1.03.0700 is necessary,0700 or earlier version is the base of all moding now.:grinning:
[2018-01-25 06:44:49]
jezzab :
Its best to start a clean slate from there and move up leaving out the FC stuff
[2018-01-25 06:45:07]
jezzab :
I mean your only on it for what? 10 minutes before you upgrade again lol
[2018-01-25 06:47:02]
jezzab :
<https://dji.retroroms.info/howto/modulemix>
[2018-01-25 06:54:08]
xchwaw :
Roger that,it is so kind of you,thanks again!
[2018-01-25 09:32:30]
kilrah :
Older versions of the app (e.g. 4.1.3) needed online access to know about the spark lock, so if you patched those with no online access you were good. It's possible that it's "baked in" in the newer versions.
[2018-01-25 14:50:45]
zule :
What do you mean by if it's got a internal microsd? How would I know? I know it came with a 16gb microsd that pics are put on, are you saying there is also an internal one?
[2018-01-25 18:29:55]
nick :
Hi guys, Any of you have concerns about the Air (in terms of abilities, future hacks/mods, etc)? I've got one on order but am now second guessing my purchase and wondering if I should just pick up a MavicPro instead. Curious whether you think the Air is worthwhile as a starter drone.
[2018-01-25 18:53:30]
jakub :
If you're in hurry and want to have some mods/hacks go with mavic pro, otherwise wait for some informations about air. For now I guess it's still too early to have some data.
[2018-01-25 19:01:08]
zule :
considering they are roughly the same price (air regular price, mavic sale price) you should really go with the better hardware of the mavic pro unless you want the smaller size.
[2018-01-25 19:01:16]
zule :
at least that's my view on it
[2018-01-25 19:01:28]
zule :
I paid $800 over christmas for a mavic fly more combo.
[2018-01-25 19:09:29]
nick :
@zule, great price, I haven't seen any deals like that recently or I'd probably just go that route.
[2018-01-25 19:09:59]
nick :
I do like the idea of portability - the easier it is to get it around the more likely I'll get more use out of it.
[2018-01-25 19:18:36]
jakub :
I would consider Air only because it's taken as "toy drone" by regulations in my country due to weight
[2018-01-25 19:19:23]
zule :
heh, in the USA technically they reinstated the law requiring registration of the mavic. Without any change to it and the reason it's already been struck down as not enforcable.
[2018-01-25 19:19:56]
zule :
it's a large joke because the FAA is trying to regulate hobby craft when they specifically are not mandated to regulate hobby craft. Big mess.
[2018-01-25 19:24:38]
stgcom :
Hey Shadow who had the Fly more Mavic for $800? I got it for $899 and thought I was hot shit
[2018-01-25 19:25:03]
stgcom :
@zule
[2018-01-25 19:28:59]
stgcom :
@jezzab Props for the beautiful modding tool you made. With that out the way, trying to unlock my Spark many times after a flash to .300 has been unsuccessful even when DUMLdore dialogue says “Spark Unlocked”. FYI it’s fresh out the box then downgraded to .300 from .600
[2018-01-25 19:38:22]
zule :
shogun, you're right it was $899 - B&H. But without the fly more it was the Air's pricing now. I think Mavic refurbs are what, $600 to $700?
[2018-01-25 19:43:20]
jcarlo :
I do like the pictures that the Mavic Air is producing. But it looks like a toy. I actually like the look of the spark better. They should have made spark foldable.
[2018-01-25 19:45:06]
stgcom :
@zule I think refub Mavic is $799 on DJI site
[2018-01-25 19:45:41]
jcarlo :
I also think that Mavic Pro was more well thought out
[2018-01-25 19:46:49]
stgcom :
Since the extra batteries are so necessary I figured fly more for $899 was still respectable. Also Occusync and 28 mins w/ the Platinum props made me feel better once I saw the Air is basically the same RC setup as a Spark. Which was what made me end up buying a Mavic.
[2018-01-25 19:47:55]
stgcom :
I think the platinum props actually do work for extra battery life on standard Mavic. It’s probably because it takes less RPM to move the same weight
[2018-01-25 19:53:28]
zule :
oh I agree completely. I'm just saying for the $800 price of the air I'd think twice about just buying a refurb mavic or wait for another sale.
[2018-01-25 19:53:59]
zule :
the air looses flight time, camera quality, RC range/technology... and almost costs as much. seems silly.
[2018-01-25 19:59:01]
kilrah :
price to pay for smaller size and seemingly better camera
[2018-01-25 20:04:30]
nick :
I'll probably stick with my air purchase - the "toy" perception will probably be a benefit for me - plenty of people where I live can get pretty upset over drones.
[2018-01-25 20:33:47]
jakub :
aside from air, <https://store.dji.com/product/tello> this looks like nice and cheap toy :wink:
[2018-01-25 20:34:08]
jakub :
at least for its price
[2018-01-25 20:41:26]
stgcom :
@nick a lot of people mention on YouTube liking the Spark for the very reason of people don’t freak out when they see you flying a Spark or Air because it looks less menacing and more like a toy. Hostility seems to come out sometimes thinking it looks too serious so therefore you’re up to something instead of just playing around with a gadget.
[2018-01-25 20:48:49]
jakub :
in Poland we have more restrictions when flying drones with over 600g... I hope I'll be able to lie my way out with mavic pro in some case :stuck_out_tongue: cman it's so small, it's just a toy~
[2018-01-26 04:10:02]
adrian :
<!here> hi guys. If anyone gets his/hers hands on a mavic air, could you test the gimball in sport mode? The Air's and the spark's gimball design is similar (I know it's not the same) and on Spark, the gimball couldn't keep up with lateral movements in sport mode. I'm curious if the Mavic Air is the same. Thanks!
[2018-01-26 07:32:06]
kilrah :
i hope not but yes it's a possibility
[2018-01-26 07:32:16]
kilrah :
have one on order...
[2018-01-26 09:34:41]
paoloone :
Please guys, I'm on the. 0700 firmware, what is the most stable version of the DJI GO 4 app for Android? I'm currently running a old 4.1.3 but it crashes at least once every flight, luckily I have the goggles so I can keep flying. I'm on a Xiaomi Mi6 with Miui 9, Android 8
[2018-01-26 09:37:28]
d :
I thought this slack was meant only for reverse engineering DJI software
[2018-01-26 09:56:44]
jezzab :
I’m sure by the channel name you could work out what this channel is for @d
[2018-01-26 09:58:52]
jezzab :
Nice introduction, rag on one channel and sap for information in another
[2018-01-26 12:08:43]
d :
sap for information... why so antagonistic/hostile?
[2018-01-26 12:21:40]
jezzab :
Because of ur attitude. You rock up, ask for all the info with doing no work at all or even a Hi, turn up in this channel and say it was just for Rev Eng
[2018-01-26 12:22:21]
d :
apologies for the lack of an introduction, I guess I can be a bit straight to the point
[2018-01-26 12:22:22]
jezzab :
Why not pop in and say hi, see how it rolls here and scope it out
[2018-01-26 12:22:41]
d :
the reason I asked for information (domains/subdomains/whatever people have) is to avoid doing the same work twice
[2018-01-26 12:23:57]
jezzab :
What’s the point with the domains. If you did ur research then you would know DJI ain’t paying shit without signing an NDA that includes your first born child
[2018-01-26 12:24:18]
d :
what do you mean by paying shit? I'm not even looking for money
[2018-01-26 12:24:40]
jezzab :
What ARE you looking for?
[2018-01-26 12:24:55]
d :
firmware, source code, other interesting secrets
[2018-01-26 12:27:12]
jezzab :
Familiar with CFAA?
[2018-01-26 12:27:21]
d :
yep, your point?
[2018-01-26 12:27:42]
jezzab :
Do some research
[2018-01-26 12:28:19]
d :
apropos attitude.. heh.
[2018-01-26 16:15:28]
djislack :
Banhammer
[2018-01-26 16:22:55]
nocommie :
lol, I saw that. get'em @jezzab!
[2018-01-26 19:11:37]
windstar127 :
is there any reason why i wouldn't be able to connect to the ftp server on the drone if i don't have dji assistant running?
[2018-01-26 22:53:08]
jezzab :
If your RNDIS network drivers aren’t working @windstar127
[2018-01-26 23:13:23]
jakub :
Hmm... anyone used PGYTECH lens filters on mavic? I'm curious if they are worth this price (cheap from what I can see)
[2018-01-27 01:14:00]
ben_lin :
@jakub those are soldi on DJI site as well
[2018-01-27 01:14:07]
ben_lin :
Not bad honestly
[2018-01-27 01:31:28]
jakub :
thanks @ben_lin! I'll try them
[2018-01-27 02:20:24]
ben_lin :
@jakub polar pro ones are better but expensive
[2018-01-27 02:21:12]
jakub :
@ben_lin this 'better' was measured by soemone ? :stuck_out_tongue:
[2018-01-27 02:21:50]
ben_lin :
Ed ricker on YouTube
[2018-01-27 02:22:05]
ben_lin :
He’s a mavicl lover
[2018-01-27 02:22:34]
jakub :
I mean tests like this one :wink: <https://www.lensrentals.com/blog/2017/06/the-comprehensive-ranking-of-the-major-uv-filters-on-the-market/>
[2018-01-27 02:22:36]
ben_lin :
I own polar pro ones, if you find them cheap just get them
[2018-01-27 02:22:44]
jakub :
but I'll check YT thanks for info
[2018-01-27 02:23:23]
ben_lin :
Nd filters with bad quality can fuck your colors
[2018-01-27 02:25:41]
jakub :
I hope they wont, but gonna check it once I'll get either of them
[2018-01-27 02:26:10]
jakub :
night o/
[2018-01-27 09:35:18]
lonelynok :
Hi every body
[2018-01-27 09:35:23]
lonelynok :
I am new to here
[2018-01-27 09:35:35]
lonelynok :
May I where can I find 4.1.15-3027412-nosecneo.apk from this group
[2018-01-27 09:35:40]
lonelynok :
May I know*
[2018-01-27 09:37:59]
jezzab :
!apk
[2018-01-27 10:05:54]
lonelynok :
Thx jezzab
[2018-01-27 10:05:57]
lonelynok :
I love you!
[2018-01-27 10:06:04]
lonelynok :
Greeting from HK
[2018-01-29 07:32:23]
bourkeisrobbo :
Hi all, I'm certainly someone who needs some spoon feeding. Thanks for all the work you've done, I hope I'm not too much of a noob with all this. I've been looking over the wiki, and the RC groups forum, and have a couple of questions.
Essentially, I'm in Australia, and want to be able to unlock FCC power levels. I've seen a bunch of pages on the wiki that say methods don't work anymore, so I'm not sure which way to look. If i grab the nosec 4.1.15 version of Go and mod it, will that let me unlock FCC? And do I need to put custom firmware on the AC as well? I'm sure this has been answered but I've just been getting lost following methods that no longer work.
Thanks for your help!
[2018-01-29 07:52:41]
ben_lin :
@bourkeisrobbo the fcc hack works on iOS 4.1.12 with config file method
[2018-01-29 07:53:02]
ben_lin :
On android, use the !apk and customize it
[2018-01-29 07:53:52]
ben_lin :
Fcc and ce configurations are based purely on dji go, it has nothing to do with AC
[2018-01-29 10:58:08]
bourkeisrobbo :
Great, thanks so much. Are there going to be any firmware clashes if I drop the dji go version back to 4.1.15?
[2018-01-29 12:21:48]
b3he8iyzieybdamf :
@bourkeisrobbo No, just use 4.1.15 with fcc patch and you are good to go
[2018-01-29 21:04:47]
windstar127 :
@jezzab thanks. that solved my problem.
[2018-01-29 21:08:34]
jezzab :
@hello search for a ‘SMD Tactile Switch’. You will have to get the right footprint and style but it would be best to replace it
[2018-01-29 21:11:32]
hello :
Thank you, @jezzab very helpful to have the name/term of something to search for! Will check it out.
[2018-01-29 21:30:59]
djislack :
@hello You could always just attach a small momentary switch and epoxy it somewhere convenient
[2018-01-29 22:45:16]
kilrah :
bridging with a clip when you ahve to bind will work too
[2018-01-29 22:58:58]
djislack :
Yeah, you got the weight reduction upgrade!
[2018-01-30 04:40:14]
hdizzle :
@bourkeisrobbo also if you have android and ios, use the 4.1.15 patched apk to set FCC mode amd then you can use the latest iOS app just tap cancel when it wants to change wifi region and you keep the FCC and get new app features. I do this.
[2018-01-30 04:40:46]
hdizzle :
with my spark I should say
[2018-01-30 04:56:56]
djislack :
@hdizzle Excellent tip!
[2018-01-30 04:56:58]
djislack :
Thanks
[2018-01-30 05:23:53]
bourkeisrobbo :
@hdizzle Awesome, thanks for that! I've been running off android, but it's good to know I've got that option. I haven't got any notifications about changing wifi region when I'm running the modded app, nor when I switch back to the stock app. Does this mean I've done something wrong? Is there any way to test I've successfully changed to FCC? I've tried to fly it out to the edge of its range, and it seems pretty similar at the moment, but that's in a fairly interference heavy area.
[2018-01-30 05:30:02]
jezzab :
Check ~android_apk_patching and scroll back a bit where its mentioned to check a file on the android device to see if the country is US. If it is, its worked
[2018-01-30 05:39:23]
jezzab :
[2018-01-30 05:39:42]
jezzab :
Since this channel is called Spoon Feeding. There it is ^^^ :wink:
[2018-01-30 08:53:59]
chucken1 :
@hdizzle Have you tried if android to ios wifi region change also works with mavic pro?
[2018-01-30 08:54:41]
hdizzle :
I have not sorry
[2018-01-30 09:08:28]
chucken1 :
Ok, I will have to try it and see if it's works :slightly_smiling_face:
[2018-01-30 10:59:48]
validat0r :
is it possible to connect more than one device with DJI GO 4 to a AC/RC setup? like to share the video-stream with another person on site?
[2018-01-30 12:36:57]
chucken1 :
I think it's possible with mavic pro if you have 2 RC.
[2018-01-30 16:05:23]
validat0r :
what's the best practice for manipulating parameters in the field besides carrying a notebook with DJI Assistant with you? is there a solution with an APP and OTG cable?
[2018-01-30 16:48:25]
mefisto :
I am thinking sometimes about such app, which would allow to create "profiles" of settings and then quickly load one of them at the field.. but I'm never motivated enough to sit and write it.
Most parameters can survive reset, so currently the way is to change them before the trip.
[2018-01-30 17:09:44]
validat0r :
would love such an app. I have to drive some time to reach my fly zone, so it's a cumbersome back and forth
[2018-01-30 18:08:33]
melanor9 :
hey gents
[2018-01-30 18:09:14]
melanor9 :
i have wierd battery behaviour - i have two mavics and 4 batteries between them and after FW update in october one of those batteries started act stupid
[2018-01-30 18:09:41]
melanor9 :
its only compatible with mavic it was purchased with
[2018-01-30 18:09:45]
melanor9 :
and thats it
[2018-01-30 18:10:25]
melanor9 :
it looks like its "bound" to this particular mavic.
[2018-01-30 18:10:53]
melanor9 :
i wrote to support and ofc they are useless, but one of the livechat specs mentioned that this battery is "encrypted"
[2018-01-30 18:11:06]
melanor9 :
any idea what can be done with that ?
[2018-01-30 18:11:40]
melanor9 :
generally i am really pissed with DJI and their "quality"
[2018-01-30 18:11:47]
melanor9 :
out of 4 bats two are "funny"
[2018-01-30 18:12:00]
nocommie :
Do both mavics have the same exact FW?
[2018-01-30 18:12:28]
melanor9 :
yep
[2018-01-30 18:12:39]
melanor9 :
i rolled it back and forth
[2018-01-30 18:12:45]
melanor9 :
fully discharged this battery
[2018-01-30 18:12:47]
melanor9 :
no avail
[2018-01-30 18:12:56]
nocommie :
You may try reflashing the FW of the mavic with teh battery that is having issues installed
[2018-01-30 18:13:14]
nocommie :
and what do you mean only compatible with one of teh mavics?
[2018-01-30 18:13:27]
nocommie :
will it not power on? Does it give an error etc?
[2018-01-30 18:13:36]
melanor9 :
it will power on
[2018-01-30 18:13:51]
melanor9 :
but it will give "battery authentication failed" message
[2018-01-30 18:13:59]
melanor9 :
and mavic will reject to spin on
[2018-01-30 18:14:14]
melanor9 :
and also if i try to update in the mavic that "rejects"
[2018-01-30 18:14:18]
melanor9 :
update also will not happen
[2018-01-30 18:14:24]
nocommie :
What happens if you change the parameeter to allow non dji batteries?
[2018-01-30 18:15:10]
nocommie :
and are you using any modded parameters already or a modded go app? Are you mixing modules on the mavic or standard FW?
[2018-01-30 18:15:36]
melanor9 :
nope
[2018-01-30 18:15:45]
melanor9 :
i am running native stuff
[2018-01-30 18:16:02]
nocommie :
so all stock and no mods
[2018-01-30 18:16:03]
melanor9 :
where i can lookup for "non dji batteries" ?
[2018-01-30 18:16:54]
nocommie :
dev/debug console in assisatnt beta
[2018-01-30 18:17:07]
nocommie :
do you know what that is?
[2018-01-30 18:17:24]
windstar127 :
more newbie questions: what would cause me to not see the drone as a listed device when using adb? I can connect to the drone. I can view the ftp server. But it's not showing up when I run adb devices
[2018-01-30 18:17:52]
nocommie :
are you rooted?
[2018-01-30 18:17:57]
windstar127 :
no
[2018-01-30 18:17:59]
melanor9 :
nope, any point out to wiki page ?
[2018-01-30 18:18:58]
nocommie :
<https://www.youtube.com/watch?v=CkpfC56u_ak&t=7s>
[2018-01-30 18:19:09]
melanor9 :
thank you
[2018-01-30 18:19:24]
nocommie :
that will show you how to get into the dev console of assisatnt. Soemwheer in there is a section about batteries
[2018-01-30 18:19:37]
nocommie :
Not in the video, but in the dev console
[2018-01-30 18:21:10]
melanor9 :
will try it and be back with results
[2018-01-30 18:23:18]
nocommie :
Please report back and also please provide teh manufacture dates of both mavics and which is havign the issue etc.
[2018-01-30 18:23:31]
nocommie :
<http://dji.retroroms.info/howto/mavic_serial_number_decoder>
[2018-01-30 20:12:34]
melanor9 :
2017 April 5 - compatible with said "encrypted battery"
[2018-01-30 20:13:25]
melanor9 :
2016 April 2 - not compatible
[2018-01-30 20:13:47]
melanor9 :
UE4 and DE2
[2018-01-30 20:15:14]
nocommie :
Interesting. Thanks for the info. Did you change to non-dji battery?
[2018-01-30 20:22:58]
melanor9 :
not yet
[2018-01-30 20:23:06]
melanor9 :
what version of assistant do i need ?
[2018-01-30 20:23:20]
melanor9 :
do i need any particular version of firmware ?
[2018-01-30 20:24:07]
melanor9 :
i am right now rolling back to 1.4.0100 (god its slow)
[2018-01-30 20:51:09]
melanor9 :
no DevTool string in my Assistant
[2018-01-30 22:39:30]
melanor9 :
battery.type 1 ?
[2018-01-30 22:39:33]
melanor9 :
this field ?
[2018-01-30 23:04:39]
nocommie :
one sec
[2018-01-30 23:06:50]
nocommie :
Go to flight settings and then battery at the top.
[2018-01-30 23:24:24]
validat0r :
Does DJI Assistant 2 run on Linux Wine?
[2018-01-31 00:46:45]
lolo780 :
Assistant 2 runs on Chinese cooking wine
[2018-01-31 02:59:27]
ben_lin :
lmao
[2018-01-31 07:04:17]
djislack :
hahaha
[2018-01-31 07:17:14]
melanor9 :
@nocommie so after enabling "nondji" battery i can fly with this mavic/battery combo. few solid questions:
a. why in Assistant i can see battery/cells voltage even when i choose "Intellegent battery"
b. why i can NOT see battery/cell voltage in GO4 ?
c. why on other mavic the very same battery works like a charm ?
[2018-01-31 07:49:24]
djislack :
Was the battery updated beyond the version in your mavic?
[2018-01-31 13:02:26]
hawkinzzz :
noobie here, been watching the forums and quite a few of the chats in here and some great work going on! I have just received my Mavic pro today and am excited to get out with it and record some video. Like most of you (I guess) before getting anything like this i do my research and look into how i can tinker and get the most out of it :slightly_smiling_face: so to my question, how can i mod the .apk (android) so that it forces the RC to use FCC. I have downloaded the 4.1.15 nosecneo .apk and installed it on my device succesfully but i presume there are extra steps and i will have to patch the FCC mod into that .apk. Where can i find this mod and how would I patch it to the app? do i need the DJI assistant for windows and to connect to my phone/drone with USB debbuging enabled?
[2018-01-31 13:03:34]
jakub :
!wiki
[2018-01-31 13:03:54]
jakub :
howtohack -> deejayeye-modder
[2018-01-31 13:05:53]
kimilim2710 :
Alot of groups on Facebook provide modded apps just search for dji Mavic mods or dji spark mods, you should find the groups, the modded apps are usualy in a pinned post in top if the group front page.
[2018-01-31 13:08:01]
hawkinzzz :
Nice! Thank you!
[2018-01-31 13:14:18]
hawkinzzz :
can the FCC mod be done on 4.1.3 APK? the deejayeye-modder page says to download this .apk and apply the patches to that but the .apk links in here only go up to 4.1.15
[2018-01-31 13:17:35]
kilrah :
4.1.3 is good, it didn't need a "special" apk like newer ones.
[2018-01-31 13:20:13]
hawkinzzz :
sweet, thanks!
[2018-01-31 13:31:20]
chucken1 :
But the 4.1.3 don't need to be modded for FCC, I think you only need the .dji.confis file :thinking_face:
[2018-01-31 13:53:12]
hawkinzzz :
where can i find those config files? and how do i apply them? was going to use the Deeyayeye-Modder when i got home, looks easy enough
[2018-01-31 14:00:12]
jezzab :
You should respect the original source for the patches. Download a prepackaged version and it can be out of date and who knows what patches were applied or worse, malware. And if you come here asking for support for a premade version, you won’t get any here and told to piss off. The deejayee stuff is as Shake and Bake as it gets and takes minutes to do
[2018-01-31 14:02:29]
hawkinzzz :
I was skeptical about a prepackaged APK, anything could have been added to it. Especially when its so simple to customise your own from scratch
[2018-01-31 14:02:52]
jezzab :
Spot on!
[2018-01-31 14:08:07]
hawkinzzz :
I have seen chat about using a fake GPS app to spoof location when setting FCC and then changing back before flying and just canceling the prompt that comes up, leaving the FCC setting on. Would anybody suggest against this? does it work? would it work on the most up to date release? it seems as thought the app uses more than just the phones GPS to set the power levels. Also presume the patch works on several levels to make sure FCC is always set
[2018-01-31 15:39:17]
kilrah :
yup as of today's versions
[2018-01-31 15:39:28]
kilrah :
but that's only for wifi birds
[2018-01-31 19:20:19]
quad808 :
@hawkinzzz I also have a "how to" on my blog with loads of more in depth info. There is a link in the !wiki Link is in the FAQ.
[2018-02-01 05:42:13]
soddy :
how to get the fly logs to check fcc works or not from ipad mini
[2018-02-01 09:18:17]
hawkinzzz :
@quad808 Thanks i will check that out! i managed to get it done in no time (spent longer downloading everything). Haven't had chance to test the range yet, will be doing that this weekend when i can get out during the daylight :joy: I didn't apply the patch to stop it from connecting to the internet (and calling home) is this something i should be doing if i am modding the app? also is there a way to tell for sure the mods have been applied ie. in a log file within the app
[2018-02-01 09:19:42]
hawkinzzz :
also, have always been eager to learn how to patch software but have limited knowledge. is there any way to dive into the deep end with these kinds of patches?
[2018-02-01 09:37:57]
hawkinzzz :
wow nice blog @quad808!! very detailed and lots of good resources in there
[2018-02-01 19:24:50]
quad808 :
@hawkinzzz Thanks. I only fly in Airplane mode due to the fact that any connection to data, unless the GO app is fire walled, will allow a connection to DJI. I do both. Airplane mode and fire wall the app, just in the off chance I forget to turn my device to airplane mode. I don't want or need DJI grabbing my files, and believe me...the stock GO app will. If you are patching the GO app, you can watch the progress and see if the patches go or not. It will error if not. Try check out android_apk_patching...thats the group where a lot of discussion takes place on this subject.
[2018-02-01 19:46:40]
validat0r :
@quad808 can you recommend a firewall app?
[2018-02-01 20:02:38]
quad808 :
I use Netguard
[2018-02-01 20:21:07]
quad808 :
Don't know if its the best or not, but it works.
[2018-02-02 03:02:32]
djislack :
@quad808 Thanks for the tip, I tried netguard today -works well for me!
[2018-02-02 22:35:42]
melanor9 :
guys
[2018-02-02 22:35:43]
melanor9 :
Choose port: 1
Using Port: cu.usbmodemfd45
Sending upgrade command
Uploading payload 1
Exception in thread "main" java.net.ConnectException: Connection refused (Connection refused)
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:350)
at java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:206)
at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:188)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
at java.net.Socket.connect(Socket.java:589)
at org.apache.commons.net.SocketClient._connect(SocketClient.java:243)
at org.apache.commons.net.SocketClient.connect(SocketClient.java:202)
at com.cunninglogic.dumlracer.Main.uploadFile(Main.java:343)
at com.cunninglogic.dumlracer.Main.main(Main.java:129)
[2018-02-02 22:36:04]
melanor9 :
any idea what was wrong with this race ?
[2018-02-02 22:36:29]
zule :
wrong serial port it looks like?
[2018-02-02 22:38:45]
melanor9 :
hmm... it tries to attach to serial over TCP ? :slightly_smiling_face:
[2018-02-02 22:38:46]
melanor9 :
* [1] cu.usbmodemfd45 : DJI
* [2] tty.usbmodemfd45 : DJI (Dial-In)
[2018-02-02 22:38:54]
melanor9 :
i chose 1
[2018-02-02 23:00:37]
melanor9 :
Choose target port: (* suggested port)
* [1] cu.usbmodemfd45 : DJI
* [2] tty.usbmodemfd45 : DJI (Dial-In)
[E] Exit
Choose port: 2
Using Port: tty.usbmodemfd45
Sending upgrade command
Uploading payload 1
Exception in thread "main" java.net.ConnectException: Connection refused (Connection ref
ed)
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:350)
at java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.jav
206)
at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:188)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
at java.net.Socket.connect(Socket.java:589)
at org.apache.commons.net.SocketClient._connect(SocketClient.java:243)
at org.apache.commons.net.SocketClient.connect(SocketClient.java:202)
at com.cunninglogic.dumlracer.Main.uploadFile(Main.java:343)
at com.cunninglogic.dumlracer.Main.main(Main.java:129)
[2018-02-02 23:00:47]
melanor9 :
same happeining with 2
[2018-02-04 02:57:55]
poopnondji :
Anyone successfully connect spark rc to PC? Mine isn't detecting in device manager, is there a button combo or something I need to do?
[2018-02-04 03:06:44]
jezzab :
It's wifi mate not USB
[2018-02-04 03:07:22]
jezzab :
You connect to the spark RCs wifi access point
[2018-02-04 03:16:42]
poopnondji :
Aahh thanks gonna try that out now
[2018-02-04 11:09:54]
trulala69 :
Hi guys! I've read somewhere that it was possible to enable a part of the magic camera options like styles for the spark in DJIGo. Any hint, where to look at? Thanks ...
[2018-02-04 11:10:10]
trulala69 :
magic=mavuc
[2018-02-04 11:10:31]
trulala69 :
mavuc=mavic ... ahhhh,finger trouble in the morning ...
[2018-02-04 17:50:08]
melanor9 :
gents, stupid question
[2018-02-04 17:50:20]
melanor9 :
so i have disabled
[2018-02-04 17:50:51]
melanor9 :
g_config_flying_limit_height_limit_enabled = 2
g_config_flying_limit_limit_height_abs_without_gps = 3000
g_config_flying_limit_limit_height_abs = 3000
g_config_flying_limit_limit_height_rel = 3000
[2018-02-04 17:51:04]
melanor9 :
but still have warning trying to get above 500
[2018-02-04 17:51:26]
melanor9 :
not that i'm trying to go rogue, its just i want to have an options when traveling in mountain regions
[2018-02-04 17:51:36]
melanor9 :
any ideas what i'm doing wron here ?
[2018-02-04 18:27:18]
lolo780 :
Those parameters look correct.
[2018-02-04 20:26:41]
melanor9 :
may be its application that limits the height ?
[2018-02-04 21:05:17]
lolo780 :
What's your setup?
[2018-02-04 22:32:26]
melanor9 :
1.4.200 + 1.3.7 (305/306)
[2018-02-04 22:32:42]
melanor9 :
4.1.15 go4 patched
[2018-02-04 23:21:16]
melanor9 :
actually - this string is not available
[2018-02-04 23:21:17]
melanor9 :
g_config_flying_limit_height_limit_enabled = 2
[2018-02-04 23:38:19]
lolo780 :
Blanked out?
[2018-02-04 23:38:42]
lolo780 :
Maybe you're not on .700 flight control
[2018-02-04 23:40:12]
melanor9 :
not blanked, just not present
[2018-02-04 23:40:52]
melanor9 :
i am pretty sure that 305/306 are from .700
[2018-02-04 23:52:29]
jezzab :
So you get just a warning or you cannot fly over 500m?
[2018-02-04 23:55:22]
jakub :
I think there's no way to get rid of "warning" itself (at least now), but it can be ignored and AC should be able to fly anyway, right?
[2018-02-05 00:05:33]
jezzab :
You usually just get a warning when you take off
[2018-02-05 00:05:55]
jezzab :
Or raise above a few feet but it doesnt actually stop u
[2018-02-05 00:54:22]
lolo780 :
try flashing stock .700 and it should appear. Change the parameters you want and then flash .0200. FC settings will stay if you delete FC modules from .0200
[2018-02-05 09:52:46]
melanor9 :
thank you. will try
[2018-02-05 14:22:53]
lonelynok :
@melanor9 Won't 1.4.200 blocked parameter modification?
[2018-02-05 14:23:26]
lonelynok :
and to answer you question after you modified the parameter...
[2018-02-05 14:23:47]
lonelynok :
you still cannot change the height limit to exceed 500 in dji go 4
[2018-02-05 14:24:23]
lonelynok :
but you will see your AC and ascend beyond 500m
[2018-02-05 14:24:34]
lonelynok :
in your app
[2018-02-05 19:00:11]
melanor9 :
@lonelynok i am running hybrid. 305/306 are 3.700
[2018-02-05 19:07:00]
lolo780 :
The height limit is ignored if you set that parameter.
[2018-02-06 00:15:46]
lonelynok :
@melanor9 Oh... thx!
[2018-02-06 07:25:12]
dudinirgad :
umm question does rooting dji drone gives you anything other than hight limit bypass and restricted area bypass?
[2018-02-06 08:38:30]
matthias.loeffel :
you don't need root for disabling altitude limits, just the right firmware and parameters
[2018-02-06 08:39:29]
matthias.loeffel :
and IIRC you don't even need root for nfz changes, only if you want to get rid of all warnings
[2018-02-06 10:29:48]
hawkinzzz :
Which firmware is best for changing parameters (and most stable)? I think my Mavic is on the latest firmware. I've heard its easy to downgrade, i'm just wandering what i should downgrade too. For reference i'm running DJI GO 4 on 4.1.14 nosecneo
[2018-02-06 11:11:32]
hawkinzzz :
Never mind, @quad808 blog explains about using mixed modules. I'll have a play and see how it goes
[2018-02-06 11:16:15]
matthias.loeffel :
@hawkinzzz check here which parameters are available in each revision: <https://dji.retroroms.info/howto/mavicallparams>
[2018-02-06 11:40:53]
hawkinzzz :
cheers @matthias.loeffel
[2018-02-06 20:11:08]
royeiror :
Is there a clear guide available for removing the 905 module from a rooted Mavic?
[2018-02-06 20:12:36]
royeiror :
I have had success with DUMLRacer but, I don't really know ADB
[2018-02-06 20:12:57]
nocommie :
just access via adb shell and look for the module. I believe it is either in backup or upgrade folders. Cant recall which at the moment
[2018-02-06 20:13:12]
nocommie :
I suggest googling adb commands
[2018-02-06 20:16:42]
nocommie :
and just to be clear, there is no current benefit to delete 905 or the ac db. If you disable nfz in paramaters on FW 700 or mixed modules, having 905 or not makes no difference other than possibly less popups.
[2018-02-06 20:17:40]
dudinirgad :
So why root?
[2018-02-06 20:18:33]
kilrah :
for research
[2018-02-06 20:18:50]
royeiror :
From what I gather so you can remove the NFZ module and have less warnings
[2018-02-06 20:23:36]
quad808 :
@dudinirgad really? You do realize that with root access...you can make all sorts of good things happen.:thinking_face:
[2018-02-06 20:26:06]
royeiror :
@quad808 I've seen your blog post and a bunch of the stuff [you.ve](http://you.ve) posted on the rc groups, do you have a thorough guide for ROOT themes?
[2018-02-06 20:26:41]
quad808 :
what do you mean, themes?
[2018-02-06 20:27:40]
royeiror :
Like what other "good things" you can do with root access apart from deleting modules directly from the device
[2018-02-06 20:29:20]
quad808 :
I did put up a how to for removing .0905, but beyond that...nothing public.:thinking_face:
[2018-02-06 20:29:37]
kilrah :
if you have to ask - then you've got no use for it :smile:
[2018-02-06 20:30:00]
kilrah :
what it allows you to do is grab and analyze files and the system...
[2018-02-06 20:30:11]
quad808 :
Just be careful with root, you can brick easily if you don't know what you are doing.
[2018-02-06 20:32:12]
royeiror :
@quad808 thanks, I'll look it up
[2018-02-06 20:35:52]
windstar127 :
I'm having some weird problems with the .DAT flight logs I pull off the RC of my P4P+. I'm trying to use DatCon 3.1 to decrypt them, and about half the time, I get an error of 'This is not a valid .DAT file.' Does anyone know what might be causing this?
[2018-02-06 20:39:14]
kilrah :
the dats from the remote/app are not what you want, you need those from the aircraft
[2018-02-06 20:41:47]
windstar127 :
how would I get them off a p4p+?
[2018-02-06 20:42:32]
kilrah :
check datcon documentation, there are guides
[2018-02-06 20:46:36]
windstar127 :
is there any way to pull the .dat files from the aircraft without using DJI assistant?
[2018-02-06 20:49:52]
kilrah :
depends on firmware version, at some point you could have the log drive appear as usb mass storage
[2018-02-06 20:50:35]
kilrah :
but still needed the assistant to switch it to that mode
[2018-02-06 20:51:06]
windstar127 :
pretty sure the one i have is 1.03.0509 for firmware. drat. Was hoping to avoid using dji assistant at all.
[2018-02-06 20:51:11]
kilrah :
otherwise you need root.
[2018-02-06 20:51:38]
windstar127 :
if i had root, how would i go about getting the flight logs?
[2018-02-06 20:52:11]
kilrah :
browse the filesystem to find them
[2018-02-06 20:52:14]
kilrah :
then download
[2018-02-06 20:53:02]
windstar127 :
i'm going to file this under 'i'm incompetent' and try to get flight logs after i've had coffee or whiskey or both.
[2018-02-07 19:24:41]
web :
!DDD
[2018-02-08 04:12:33]
syntax4head :
Anyone know if there's a resource or guide to deleting the 905 database off of a rooted Mavic? Or even a filename / path would be helpful.
[2018-02-08 04:14:22]
syntax4head :
The only file with 905 in the filename I've found is ```/data/upgrade/backup/wm220_0905_v01.00.01.07_20170929.pro.fw.sig```
[2018-02-08 05:05:52]
jakub :
`/amt/nfz.db` - I'm not sure though
[2018-02-08 09:10:59]
reuben.finch :
With a little module mixing is it possible to retain parameter modifications (NFZ and height limit) while also getting the panorama functionality from v01.04.0100
[2018-02-08 09:23:12]
lolo780 :
Should be, although I never tested pano yet.
[2018-02-08 12:14:55]
irischnpak :
/amt/nfz/nfz.db
[2018-02-08 14:27:16]
syntax4head :
Thanks. I'll take a look tonight.
[2018-02-08 15:52:18]
syntax4head :
Anyone know if there is a known workaround for mixed modules and precision landing?
[2018-02-08 20:45:38]
quad808 :
no known workaround.
[2018-02-08 20:55:00]
jakub :
@quad808 hoh.. so even 04.0100 + 04.0200 is not working?
[2018-02-08 20:58:31]
quad808 :
Yah, mixed breaks PL on higher firmware - and no one knows why, but not sure if there has been much effort to figure out why either. I don't think it's a "must" have, but its a "nice" to have feature by most. I want it though.
[2018-02-08 22:07:25]
jakub :
hmm... sounds like some kind of condition is breaking it, I mean it could be possible for specific versions but for all mixed?
[2018-02-08 22:07:35]
jakub :
I guess there's no way to unpack firmware for MP ?
[2018-02-08 23:36:13]
lolo780 :
Has anyone tried .900 mixed to see if PL works?
[2018-02-09 00:04:10]
nocommie :
Not that I am aware of as there is no benefit of using 900 305/306. (NFZ paramater is not available in 900)
[2018-02-09 00:06:02]
weprul0r :
but you can remove the height limit, which is (for me) more important than the nfz stuff.
[2018-02-09 00:06:42]
nocommie :
Cool. Give it a try and report back
[2018-02-09 01:25:18]
syntax4head :
If I just remove nfz.db from the Mavic and then use a modified APK, will that work for NFZ removal?
[2018-02-09 01:25:25]
syntax4head :
If NFZ is all I care about?
[2018-02-09 01:29:50]
syntax4head :
The goal being, I can get rid of NFZ, and keep precision landing.
[2018-02-09 02:35:24]
quad808 :
No, you will still need to disable NFZ in parameters
[2018-02-09 02:39:30]
lolo780 :
The app still has a database
[2018-02-09 22:58:08]
syntax4head :
Looking at the dji_flight binary. It looks like DJI uses SQLCipher to encrypt all of the internal SQLite databases. Then the dji_flight binary cryptographically verifies the integrity of the nfz.db, dynamic.db, and fc_db.db databases. Additionally, they have a nfz_test_case function that looks for a specific entry in the nfz database. They've really tried to harden the shit out of everything.
[2018-02-09 22:58:39]
syntax4head :
Has anyone figured out where the keys are stored yet?
[2018-02-09 22:59:02]
syntax4head :
Or how to decrypt .sig files?
[2018-02-09 23:01:49]
syntax4head :
Of course the dji_flight executable has all of the symbols stripped. It's going to take me a month to decipher all of the assembly. There's got to be an easier way.
[2018-02-09 23:08:25]
jezzab :
Doesn’t quite work like that.
[2018-02-09 23:10:13]
syntax4head :
Which part? All of it? :slightly_smiling_face: Enlighten me. I just started dabbling around today.
[2018-02-09 23:11:21]
jezzab :
Part is correct
[2018-02-09 23:13:23]
reuben.finch :
next time you have your Mavic out, could you let me know if you have panorama functions working with your current FW. thanks.
[2018-02-09 23:39:22]
lolo780 :
Ok
[2018-02-09 23:50:54]
mwales3 :
the software running on the FC board is in the 305 and 306 files right. I ran image.py on my files, but not sure what format the output file is in. It still has high entropy like it is encrypted or compressed. I tried throwing the .bin through some decompressors, nothing has liked their format. Any ideas? Anyone looked at that firmware?
[2018-02-09 23:51:26]
jezzab :
Its encrypted
[2018-02-09 23:52:01]
mwales3 :
is there any tool, or a known key to decrypt them?
[2018-02-09 23:53:19]
mwales3 :
ive also been poking around down their with a jtagulator to no avail. if anyone had any suggestions on that front...
[2018-02-09 23:54:31]
jezzab :
Perhaps in ~hardware but afaik there is no JTAG available
[2018-02-10 08:11:06]
kilrah :
for a start, which aircraft are you looking at
[2018-02-10 08:11:19]
kilrah :
things differ between some machines...
[2018-02-10 18:29:46]
asus01 :
Anyone found a way to unlock cinemaDNG and pro res on inspire 2
[2018-02-10 18:32:44]
syntax4head :
Can anyone tell me what the purpose of system.md5 is? They don't seem to correspond to MD5 hashes of the files themselves.
[2018-02-10 18:53:11]
syntax4head :
DJI has to be checking the hashes of files in /system on boot. Every time I attempt to patch a binary I lose root and have to flash twice to get it back.
[2018-02-10 18:55:16]
kilrah :
yup that's the whole point of it.
[2018-02-10 18:56:21]
kilrah :
if a mismatch is found system gets restored I believe from the upgrade backup.
[2018-02-10 18:59:17]
syntax4head :
Yep, by system_check. Maybe I'll patch that too. :smile: Looking for it's init right now.
[2018-02-10 18:59:29]
syntax4head :
It's like chasing the rabbit down the hole
[2018-02-10 19:01:14]
syntax4head :
Well, system_check is in init.rc
[2018-02-10 19:01:58]
syntax4head :
Still not entirely sure how they are deriving their hashes. It would be a lot simpler to just create a new hash.
[2018-02-10 19:02:36]
syntax4head :
Maybe I'll just remove dji_flight from system.md5 and give that a shot.
[2018-02-10 19:02:52]
syntax4head :
dji_flight is not explicitly checked in system_check
[2018-02-10 19:03:07]
syntax4head :
But first, I have two more flashes before root again :stuck_out_tongue:
[2018-02-10 19:05:10]
quad808 :
@syntax4head maybe you should be posting in ~general instead. This place is more for noobs who really need help, hence the name...
[2018-02-10 19:08:04]
syntax4head :
Okay, my bad
[2018-02-10 19:22:56]
quad808 :
no worries
[2018-02-12 08:37:49]
kyokushin :
quick question about ios
[2018-02-12 08:37:58]
kyokushin :
configs are still working?
[2018-02-12 08:38:10]
kyokushin :
what i need to do to use them?
[2018-02-12 08:38:29]
kyokushin :
(i havr no ios, asking for a friend)
[2018-02-12 08:39:58]
jezzab :
They haven’t worked since iOS 4.1.12
[2018-02-12 18:29:19]
dj :
As of today what is the newest djigo app that supports the spark and fcc mode in ce countries pleaswe. And the required craft firmware. Last i heard it was 4.1.9 with firmware .600 of the spark and .400 on the transmitter is there an updated version that i should try or stay in the low numbered firmwares. I notice the talk about the newer firmware patches for fcc now revert back to ce mode is thin only 4.1.15 and above?
[2018-02-12 18:30:09]
dj :
sorry bad spelling there i will blame it on my cheap keyboard :wink:
[2018-02-12 19:05:50]
validat0r :
@dj i'm on .900 mixed fw with 305/306 modules of .300 and go 4 4.1.14. works like a charm
[2018-02-13 08:39:28]
mick.walker :
Force FCC mode without the need for an Android device <https://www.youtube.com/watch?v=uVNEf61ds_0&t=5s>
[2018-02-13 09:15:10]
adrian :
wow! ^^
[2018-02-13 09:15:16]
adrian :
this is great if it's for real
[2018-02-13 10:13:16]
malcolmdavidge :
Anybody know their way round the M600 SDK please drop me a DM for some paid work. Many thanks
[2018-02-13 14:07:57]
mick.walker :
@adrian its for real, I created it :slightly_smiling_face:
[2018-02-13 14:09:04]
adrian :
I’m gonna try it later this evening.
[2018-02-13 14:09:36]
adrian :
The thing is that when I activated the drone, it automatically switched to ce without having a cancel button
[2018-02-13 14:29:10]
mick.walker :
It will do, but using this method you can switch it back, time and time again if need be.
[2018-02-13 16:39:18]
bin4ry :
I understand the wish to do this on ios
[2018-02-13 16:39:50]
bin4ry :
Beware that this might stop working in newer versions of the go app
[2018-02-13 16:40:58]
adrian :
did this now ^^
[2018-02-13 16:41:25]
adrian :
tomorrow will upgrade the firmware and go app
[2018-02-13 16:41:31]
adrian :
see how it sticks
[2018-02-13 17:51:36]
blak :
anyone know if DJI SDK supports pulling a full photo from mavic/p4 during flight? my goal is to immediately upload images via wifi from my android phone
[2018-02-13 18:10:54]
baj710 :
:grinning::+1:
[2018-02-13 18:15:12]
mefisto :
@blak pix4d capture does that so it is possible. Though i rarely get one image transferred while the drone is over 100m away.
[2018-02-13 18:15:54]
blak :
ok good to know
[2018-02-13 18:16:11]
blak :
but the lower res copies should be available
[2018-02-13 19:19:15]
evgeniychuiko :
@blak go can do it
[2018-02-13 19:20:12]
evgeniychuiko :
autosync hd photo in camera settings
[2018-02-13 19:25:42]
blak :
yeah i only have a phantom 3 standard right now
[2018-02-13 19:25:52]
blak :
just found that option and looks like it's probably only avail for mavic pro w/ ocusync
[2018-02-13 19:27:16]
blak :
oh actually im still running dji go 3 on this android
[2018-02-13 19:28:21]
blak :
yeah 3 doesnt seem to support the feature
[2018-02-13 21:04:54]
kilrah :
Yup it works, several people posted about it already. BUT that's only for the WiFi based aircraft i.e. Spark and Mavic Air.
[2018-02-13 22:35:30]
hello :
Hi all, hope you're all having a good week so far...wanted to see if anyone had come across this "issue" - flew my Mavic yesterday, using a patched version of the android app (4.1.14) and I went to try home lock. Selected the intelligent flight modes icon, scrolled to home lock but no response, stuck within that menu. Same with course lock. In fact there was no response by touching any icons or screen element, apart from selecting the normal flight icon, which exited out of the intelligent flight mode menu.
Was odd. Anyone had that happen? Any work arounds? I'd not, f' it.
[2018-02-13 22:58:35]
jezzab :
What patches did you apply to the apk?
[2018-02-14 06:41:03]
adrian :
did the firmware and DJI Go app update today and the "XCode location spoof FCC" is still there
[2018-02-14 09:10:27]
hawkinzzz :
I'm quite new to the Mavic so hadn't tried any of the intelligent flight modes. I have a patched version of 4.1.14 with the FCC patch. The other day i thought i would have a go and the same happened to me. the menu came up but anytime I clicked an icon, nothing happened. thought maybe i had some wrong settings on or something
[2018-02-14 10:40:00]
mick.walker :
Great stuff
[2018-02-14 10:43:14]
adrian :
it is @mick.walker! :slightly_smiling_face:
[2018-02-14 10:43:21]
adrian :
thanks!
[2018-02-14 10:45:00]
mick.walker :
I didnt do much mate, just took what others had already done, and worked it to my circumstances. :slightly_smiling_face:
[2018-02-14 10:45:38]
mick.walker :
I've had some great range since doing it though, makes the little fella usable. Except for today, blowing a gale here in Northern Ireland
[2018-02-14 17:44:20]
flyingkite :
Is there a way to delete the internal logs in Spark? I am considering selling and wanted to know if there was a method. - Thanks all. Happy Valentine's
[2018-02-15 20:01:28]
jabuasab :
can someone give me a quick how-to on removing the NFZ on a P4
[2018-02-15 20:06:56]
nocommie :
!wiki
[2018-02-15 20:11:13]
jabuasab :
@nocommie i looked in there. is the only way to do it on a P4 is by rolling back to fw 1.3.0509?
[2018-02-15 20:20:28]
lolo780 :
I used 509 flight control
[2018-02-15 20:31:56]
jabuasab :
@lowellfoo780 do i need a specific app version on the controller? i loaded the 509 FW and changed parameter airport_limit_cfg_cfg_disable_airport_fly_limit
[2018-02-15 20:32:59]
nocommie :
Normally the RC FW version doesnt matter. But most stuff here involves the Mavic so it is possible there is a difference with the P4. Just test and find out
[2018-02-15 20:33:57]
jabuasab :
but changing that parameter should do the trick...right
[2018-02-15 20:36:11]
nocommie :
You realize there are 2 parameters you have to change for nfz correct?
[2018-02-15 20:37:53]
jabuasab :
thats what i am trying to figure out
[2018-02-15 20:38:23]
lolo780 :
I actually don't know what fw is on the p4p rc.
I did try patched .15 app on the stock setup and it will lift off beside an international airport. Not sure why.
(No props were on at the time)
[2018-02-15 20:41:24]
nocommie :
@jabuasab did you happen to see the section "Have a question about how to easily bypass DJIs No Fly Zone Restrictions: " on the faq page of the wiki? I have a feeling everything you need to know is in the paragraph (and links) after that.
[2018-02-15 20:52:42]
jabuasab :
cool got it to work. Using app 4.1.10 without any issues
[2018-02-15 21:04:50]
jabuasab :
@nocommie can i run NFZ disabled with the latest app. 4.2.6.
[2018-02-16 10:23:31]
mr.vibez :
Hi, can anyone tell me why I need a data connection to view the maps even if I have downloaded offline in the google maps app (android)
[2018-02-16 10:43:55]
mathieu.peyrega :
I think the offline map download of Google Map generates data private to Google Map only... are you using a patched app ? why do you get Google Map and not android ones ? (cloned app ?)
[2018-02-16 13:50:37]
nocommie :
I recommend NEVER using an unmodded app with ANY mods on your aircraft. I do not trust DJI and would not be surprised if they start to ground or even brick aircraft that they find are modded. They can snoop on a lot of stuff with their app when it is not patched or modded.
[2018-02-16 17:07:18]
mr.vibez :
Not quite sure I understand. I thought the online version could still use offline maps?
[2018-02-16 17:13:09]
jcarlo :
How can you download offline map on litchiapp?
[2018-02-16 18:14:37]
mathieu.peyrega :
I guess many apps caches their own Google maps stack
[2018-02-16 18:15:10]
mathieu.peyrega :
but I'm really far from being sure
[2018-02-16 18:51:55]
kohler91 :
Hi guys. Thank you all for the hard work and for providing the tools to people like me who doesn’t know anything about programming.
I’ve managed to patch the apk and mix modules on my Mavic following the wiki.
I’m very interested in all of this and I’d love to help.
Can someone point me tutorials or any website where I can learn more about programming (starting from 0) so I can start contributing someday?
Thanks again for the hard work!
[2018-02-16 19:00:13]
kilrah :
Becasue the app doesn't use google maps, it uses another provider.
[2018-02-16 21:57:12]
jcarlo :
It uses here maps
[2018-02-16 21:57:51]
jcarlo :
I think Nokia developed them?
[2018-02-16 22:26:32]
joker_x3 :
Yeah, but then got bought by German Car Brands Mercedes BMW and Audi I think.
[2018-02-16 23:40:50]
kilrah :
not even anymore, recent versions have switched again to mapbox
[2018-02-17 08:45:24]
mr.vibez :
Mine uses google maps
[2018-02-17 08:46:14]
mr.vibez :
So what is the solution? Use a data connection or the offline version?
[2018-02-17 13:14:45]
jcarlo :
I use offline map version on android app. On iOS I use data or offline without map
[2018-02-17 18:51:12]
mr.vibez :
Well that was strange, today the maps showed up using the online version on a phone with no sim!
[2018-02-19 02:21:51]
ki4gyw :
If someone wanted to forward the telemetry and RTMP streams via a app or from a modified Go build. I could build a map system and make it where it would work offline on the pi or something! <https://www.youtube.com/watch?v=eeRIlPjpPGU> It would be fun to blow FLIGHTHUB out of the water with a opensource solution. This was based on mavlink and cesium.
[2018-02-19 06:24:50]
chillin :
!apk
[2018-02-19 06:26:19]
chillin :
I am curious what the Go3 is supposed to be? it's 225MB and my go 3.1.5 is 97MB. When I try to install Go3 it says it's corrupt and won't install.
[2018-02-19 08:27:00]
kilrah :
it includes the resource files (editor stuff etc) which the play store doesn't count in app and distributes separately.
[2018-02-19 08:27:49]
kilrah :
you can't install that simultaneously on the same device as a modded GO4.
[2018-02-19 10:56:57]
joker_x3 :
You can @kilrah, I'm having a modded Go4 and a modded Go3 on a Redmi Note 4 with LinageOS 14.1 .
[2018-02-19 11:05:39]
kilrah :
yeah but there are extra steps to do
[2018-02-19 11:47:34]
joker_x3 :
No, nothing special. What do you mean? @kilrah
[2018-02-19 13:39:01]
brentray620 :
Has anyone attempted rolling back a MPP to .0400?
[2018-02-19 13:43:56]
brentray620 :
disregard, found the info I was looking for
[2018-02-19 17:31:11]
chillin :
I don't have a modded go 4, only use that for my Air. but i will try Go3 on other device. Thanks.
[2018-02-19 20:43:05]
irischnpak :
@ki4gyw I made RasPi image some time ago that spans an access point, ingests RTMP streams and displays them automatically
<https://www.share-online.biz/dl/XLEGPT0PBBQ>
[2018-02-19 20:47:29]
ki4gyw :
@irischnpak nice! I'm working on saving images from the RTMP stream and stitching mosaic automatically.
[2018-02-20 02:27:26]
andrewbiddar :
Howdy Everyone, did some searching couldn't find an answer but, can any modding be done with the Mavic Air yet? my goal is to remove height restriction and NFZ if this is done in the app i was wondering if the older version will function properly with the Mavic Air.
[2018-02-20 02:52:44]
ben_lin :
No more nfz talk here
[2018-02-20 02:53:32]
ben_lin :
It CAN be done in the app but them method is not available to the public
[2018-02-20 02:53:59]
ben_lin :
Use older drones if you want nfz removals
[2018-02-20 04:10:54]
rtrocc :
hey guys, does anyone know if the the latest MPP 1.04.300 (or higher) FW is rollback-able using digdat0's suggested methods with the DUMLdore tool? I've only been able to find info about rolling back 1.04.100 and 1.04.200 but don't want to attempt the procedure and risk bricking my MPP.
[2018-02-20 04:12:59]
rtrocc :
I also read that if I already have 1.04.100 or higher, that the 905 module is going to remain (unless I root it) and even rolling back the FW won't allow the parameter changes in that module of the FW. Can someone confirm this?
[2018-02-20 04:25:23]
lolo780 :
I used assistant to go from 0300 to 0100 and then dumldore to downgrade to full .700
[2018-02-20 04:26:04]
lolo780 :
Then flashed .0300minus 305 306 and 905. Then dumlracer root, delete NFZ
[2018-02-20 04:26:49]
lolo780 :
Enjoying pano mode, no height limit.
[2018-02-20 04:27:27]
jcarlo :
@lowellfoo780 I’m not sure if you answered this already but @300 is precision landing working?
[2018-02-20 04:27:49]
lolo780 :
Hm, I can test it. I've never used it before ever.
[2018-02-20 04:32:32]
lolo780 :
<https://i.imgur.com/Fr0V5aN.jpg>
[2018-02-20 04:32:39]
lolo780 :
Landing pad
[2018-02-20 04:33:06]
lolo780 :
<https://i.imgur.com/UXmjWAk.jpg>
[2018-02-20 04:33:17]
jcarlo :
Cool
[2018-02-20 12:38:45]
pzlmg_slack :
Which version of DJI GO 4 do you use?
[2018-02-20 12:45:23]
hawkinzzz :
Has anybody done any work on the camera settings? apparently recording in 4k the Mavic processes at 60 mbps but changing to 2k, instead of recording more information per frame, it reduces the processing to 45 mbps!? do you think there is a way to keep the 60 mbps in 2k to get better quality videos? has anybody found some config files or settings that relate to this? what video settings do you all use? seems like 2k @ 24fps with -2 sharpening -1 contrast and -1 saturation in D-Log is the sweet spot for post editing the video to get the most out of it
[2018-02-20 13:03:00]
rtrocc :
@lowellfoo780 can’t thank you enough for your reply! Cheers!
[2018-02-20 15:38:15]
lolo780 :
@carlcox89 no I always fly back to the home point. Will give PL a try though.
[2018-02-20 15:39:00]
lolo780 :
@pzlmg_slack patched 4.1.15 but to shoot panos I use the latest app.
[2018-02-20 15:39:40]
lolo780 :
4.1.26 I think it is. You can fly with .15 and switch apps to do the pano and then switch back.
[2018-02-20 16:22:13]
dpitman :
GIT Hub help
Are there some directions somewhere to have the forked repos update automatically when the source repos are updated. I understand why they don't by default, but is there a setting that will achieve that?
Thanks.
[2018-02-20 16:25:21]
bin4ry :
thats not hte idea of a fork
[2018-02-20 16:26:23]
bin4ry :
so it should not update automatically, you would need to do it manually in some way or another, depends if you just mirror it regulary or if you put your own stuff into and want to get the mainline bugfixes for yourself too
[2018-02-20 16:50:51]
dpitman :
Okay, I've just been deleting and re-forking. Thought I'd ask.
[2018-02-20 20:10:39]
andrwho25 :
I crashed my downgraded drone with old firmware but I have dji refresh. They’re asking for flight records but I used a dummy email in the app. It doesn’t sync properly, should I be careful in saying i used a modded drone ? Will they still honour the refresh warranty ?
[2018-02-20 20:23:27]
kilrah :
i think you're going to be the first one to test the waters...
[2018-02-20 20:33:31]
w4t3r :
How crashed is it @andrwho25?
[2018-02-20 20:33:47]
w4t3r :
There's a command in assistant to format the flight recorder
[2018-02-20 20:35:19]
w4t3r :
And I've heard somewhere around facebook that they don't care. But I'd still recommend you to carefully "re"read the refresh terms, I think they didn't include a paragraph that it's void if you use "bad" software
[2018-02-20 20:40:35]
andrwho25 :
ah. they asked me to sync flight records. they said email didn’t matter so i wonder if the modded app also blacklists the serial number.
[2018-02-20 20:43:01]
w4t3r :
Well, obviously it doesn't sync properly. If you want to send them the logs, get them off the storage of your phone and send them via email. Or get them off the phone, reinstall the app and login with real credentials, copy the logs back and sync them
[2018-02-20 20:46:56]
andrwho25 :
ah. i don’t want to send it to them just in case it mentions the old firmware i downgraded to
[2018-02-20 21:09:56]
kilrah :
yup, offline app won't sync for obvious reasons...
[2018-02-20 21:11:07]
kilrah :
log may include firmware version but just say you simply didn't update. Although since you posted here they probably know about your case already now :smile:
[2018-02-20 21:14:35]
jezzab :
So are you claiming it under warranty or DJI Care Refresh? I’m guessing the former based on them asking for flight logs
[2018-02-20 21:21:01]
andrwho25 :
care refresh
[2018-02-20 21:21:30]
andrwho25 :
the support guy said he doesn’t know whether i’ve synced my logs or not
[2018-02-20 21:21:43]
andrwho25 :
so if the offline app doesn’t sync. i should be ok
[2018-02-20 21:22:44]
andrwho25 :
funny the offline app said no network connection so i hot spotted it and it worked. but probably just an api thing. still prob wouldn’t have gone thru i’m guessing
[2018-02-20 21:36:46]
leorimolo :
Hi, guys is there a way to activate the DJI onboard SDK on the Mavic? Or atleast be able to skip using a mobile device and using a linux/windows pc to send commands
[2018-02-20 21:36:58]
leorimolo :
(No android or IOS)
[2018-02-20 21:46:33]
jakub :
@andrwho25 just say your phone is damaged
[2018-02-20 21:46:42]
jakub :
and you can't sent them logs
[2018-02-20 21:47:10]
jakub :
you can fly using only RC, right?
[2018-02-20 21:59:13]
andrwho25 :
yeah. they also want you to send RC back
[2018-02-20 22:23:34]
jakub :
so ignore request of logs from phone
[2018-02-20 22:23:47]
jakub :
at least that's what I would do
[2018-02-21 00:10:12]
rtrocc :
Anyone by any chance happen to know which ios go 4 app version would be best to roll back to in order to completely eliminate all NFZ restrictions given that all mods are already done to the FW and the mavic itself (905 and db removed via root) ? From what I've collected, I think ios Go 4.0.x should do the trick?
[2018-02-21 03:38:49]
critterrzz :
After Dumblracer, do you run adb before or after reboot?
[2018-02-21 04:20:42]
jcarlo :
If you want completely out of DJI restrictions. Downgrade to 400 and use iOS 4.0.4. I currently use 4.0.5 with 700 without 0905. I don’t need to take off NFZ completely so I just turn of geo fencing and I can fly in yellow zones without parameter mods
[2018-02-21 06:42:39]
aqws6189 :
!apk
[2018-02-21 14:52:21]
jakub :
I had few warnings "Maximum Flight Attitude Reached."
Is this related to height limits settings on drone itself?
I remember setting `g_config_flying_limit_height_limit_enabled = 2` but didn't set those
```g_config_flying_limit_limit_height_abs_without_gps = 3000
g_config_flying_limit_limit_height_abs = 3000
g_config_flying_limit_limit_height_rel = 3000
```
got those warnings on ~3-10m height :confused:
[2018-02-21 15:17:26]
carlcox89 :
Usually i get that when I am offline for a long time (on offical app)... What I do is turn mobile data on and logoff then login in
[2018-02-21 15:17:36]
carlcox89 :
@jakub ^^
[2018-02-21 16:24:33]
rtrocc :
hmmm... I had a similar issue last night. I downgraded my go4 to 4.0.8 and it was telling me max flight altitude reached. App indeed had it set to 500m. I didn't even touch the params in the FW.
[2018-02-21 16:25:43]
rtrocc :
@carlcox89 I wasn't logged in (and rather not be). Do you think logging in and out, then going back in airplane mode (or just being away from wifi since I'm on a non-cellular ipad) will do the trick?
[2018-02-21 16:26:44]
carlcox89 :
Don't know... it might work. I just had this happen to me when I was using the official app
[2018-02-21 16:28:21]
rtrocc :
Ok, I'll play with it when I get the chance and report back if I find anything.
[2018-02-21 16:28:32]
rtrocc :
Was it an older version of the official app by any chance ?
[2018-02-21 16:45:46]
carlcox89 :
It was 4.1.14 IIRC
[2018-02-21 16:46:21]
carlcox89 :
"To ensure safety, flight will be limited to 30 m height and 50 m distance if you’re not connected or logged into to the DJI GO 4 app during flight."
source: <https://mavicpilots.com/threads/30m-height-limit.26821/>
[2018-02-21 19:10:15]
rtrocc :
Son of a B!
[2018-02-21 19:11:12]
rtrocc :
Thank you @carlcox89 . Fuck you DJI
[2018-02-21 19:13:05]
carlcox89 :
You're welcome!
[2018-02-21 22:54:12]
blak :
i just got my first mavic pro, i need to make sure not to update to latest firmware, right?
[2018-02-21 22:57:46]
ben_lin :
@blak read !wiki
[2018-02-21 22:57:57]
blak :
got it
[2018-02-22 11:28:17]
b3he8iyzieybdamf :
@jakub what about removeFWUpgradeService.patch, is it worth porting to 22?
[2018-02-22 12:55:34]
jakub :
@b3he8iyzieybdamf goOffline is working soso... I guess it's worth it. Though I won't find any time in ~2weeks from now
[2018-02-22 14:37:09]
b3he8iyzieybdamf :
Thank you :+1:
[2018-02-23 19:03:34]
mr.vibez :
I presume the asteroid mode for spark can't be unlocked? Is it a FW feature for the MA?
[2018-02-23 21:04:50]
ben_lin :
More like A hw limit
[2018-02-23 21:05:19]
ben_lin :
Spark has the same cmos as mp but can’t record 4K
[2018-02-26 08:43:18]
lucaterz :
how is the metod to add language to a 4.1.22 apk? i see the new folder with inside xml file and varoius mp3 for italian language but there isn't flag on application to mod that. Can we help me to change the language?
[2018-02-26 10:33:52]
lucaterz :
ok i understand :slightly_smiling_face:
[2018-02-26 15:57:10]
bin4ry :
It gets applied automatically if it follows this folder structure.
[2018-02-26 17:48:24]
fstephan1 :
see in Patches for the 4.1.15 for some files in other language.
[2018-02-26 20:04:38]
dj :
Ok used the 4.1.22 file i then did the deejayeye (thanks btw deejayeye) patcher, added fcc mode , eneblde cache control, mavic flight modes on spark remove update force. anyway app installed fine and is running on my phone. Question though i notice that the app does not have the option to download offline maps anymore. Am i missing something or was the a dji move. Also on this patch version is it safe to update spark to .900fw or will it undo all my hard work?
[2018-02-26 20:35:36]
weprul0r :
@dj you need also to enable the "restore_MapsDownload" patch, to get offline maps back.
[2018-02-26 20:36:59]
dj :
ah ok did wonder what that was about i thought that was only if you had enabled offline mode
[2018-02-26 20:37:18]
dj :
any advice on firwmare version thats safe to use?
[2018-02-26 20:48:35]
dj :
!firmware
[2018-02-28 04:15:59]
andrikov :
is there mod for 4.1.22 stop firmware check
[2018-02-28 09:16:42]
serafinmh :
Yes.
[2018-02-28 09:23:10]
serafinmh :
RemoveUpdateForce.patch
[2018-02-28 11:03:18]
lucaterz :
is there any update for OTG telemetry problem?
[2018-02-28 11:40:57]
andrikov :
@serafinmh it only stop app checking for new app version ... firmware checking still there
[2018-02-28 11:47:11]
andrikov :
@lucaterz for spark?
[2018-02-28 12:17:53]
serafinmh :
Forces the TX power to FCC values
Enabled intelligent flight modes from the Mavic Pro for the Spark
No forced updates - firmware or app
Activates the option whether the video should be cached locally or not.
Fake Signup - You can either sign in with your real account (online) or use the fake account. To use the fake account, you must go offline (airplane mode) and enter any non-numeric characters in the login box
For non-rooted devices @ /mnt/sdcard/DJI/dji_mod_{version_string}.db public for offline flight planning
Enabled Spark Wi-Fi Channel on OTG
Removes the check for rooted devices
OTG support
Pano support
[2018-02-28 12:19:17]
serafinmh :
airplane mode user (a)
[2018-02-28 12:51:08]
validat0r :
@serafinmh there's a "no modded apks" rule here. you might get yourself kicked from this slack. (not by me, i might add)
[2018-02-28 13:45:43]
jezzab :
Link deleted. Goodbye....
[2018-03-01 09:35:54]
hawkinzzz :
came in here to this forum and shared a pre-compiled .apk of your guys work... what was the point!? that's always been a big no no and in here of all places?
[2018-03-01 09:40:16]
ben_lin :
You don’t share pre complied apps
[2018-03-01 09:40:33]
ben_lin :
Cuz ppl can inject malware and trojans in it
[2018-03-01 10:00:47]
hawkinzzz :
yeah exactly, don't know whats in it. its just as easy to create your own because of the hard work from people in here. a couple clicks and you have your own custom app
[2018-03-01 18:08:56]
dj :
well good news i actually managed to create my own apk with help from the dev and others on here and installed and working fine so far (other than that spark drift problem I must work out what that is). Anyway thanks to all who helped now I am not interested in nofly zone unlocks or anything liek that but i did wonder if it is possible to speed up the dji sparks cruise speed. It is much slower than my old phantom 3s was. I know it has sportsmode but i do not like the gimbal twitch that happens when turning in that mode. Is there a way to change the sparks speed without going into sports mode. Maybe just a 5mph speed change would be good. I notice some other groups claim they can unlock this but havent seen anything in the mod files. Anyone have an idea on this or is it unchangeable?
[2018-03-01 19:40:27]
kilrah :
yeah, read about the parameter tweaks on !wiki
[2018-03-01 21:07:52]
dj :
Yeah i just flipped through but the parameters are for the mavic, i have changed a few minor ones but does anyone know what to change to get the gps+ mode basically faster forward flight when in gps mode not sport mode? Did a google and searched usual sited but all guides seem to be mavic based not the spark
[2018-03-02 18:02:11]
kilrah :
Some people have reported spark settings on the rcgroups "hack" thread.
[2018-03-02 18:02:41]
kilrah :
I did post my setting for faster flight in there actually
[2018-03-02 18:02:52]
kilrah :
now sold the boring spark, so...
[2018-03-02 18:32:34]
jakub :
can someone confirm if that's original part? <https://www.aliexpress.com/item/DJI-dron-Accessories-5-5-7-85-high-brightness-CrystalSky-for-DJI-Mavic-Pro-dji-spark/32841384310.html>
[2018-03-02 18:45:04]
kilrah :
looks like one, now that's no guarantee
[2018-03-02 18:45:21]
kilrah :
isn't that more expensive than getting it from`a legit source?
[2018-03-02 18:45:35]
kilrah :
in addition to being on your own at the slightest issue...
[2018-03-02 18:51:37]
jakub :
mhm, well tbh... I never had a problem with any hardware :stuck_out_tongue:
[2018-03-02 18:51:47]
jakub :
oh wait I had... just after buying it
[2018-03-02 18:52:26]
jakub :
so I'm not sure if I want to pay another ~$180 for warranty
[2018-03-02 18:53:47]
jakub :
sucks to be in EU :disappointed:
[2018-03-02 19:40:31]
quad808 :
anyone with a Spark? Whats the last firmware you can unlock Height limitation on? V01.00.0400 or .0300??
[2018-03-02 19:59:50]
validat0r :
@quad808 i'm on .0300. havent tried .0400. assumed .0300 was the last version with height unlock.
[2018-03-02 20:16:25]
quad808 :
@ilovemynexus4 thanks for confirming, that's what I thought.
[2018-03-03 21:22:09]
lolo780 :
0300
[2018-03-06 09:50:59]
paris.kapsouros :
hello noob question
[2018-03-06 09:51:12]
paris.kapsouros :
i have seen that this has been tested with samsung galaxy tab s3
[2018-03-06 09:51:35]
paris.kapsouros :
but anyone had the problem with the tablet not being able to see RC wifi once the RC connects to the drone ?
[2018-03-07 14:01:16]
ender :
Hi ! I am really out of the loop but managed to get myself a Mavic Air. Using stock DJI GO right now, using FCC via FAKE GPS so the dearest need for “mods” is cured. Can the Air Firmware safely be up & downgraded by the usual tools / methods ? So would it be safe to update the FW to the latest version or should i NOT do it as it does irreversible things ?! Need to read up on the latest developments but thats the most pressing Question right now…
[2018-03-07 15:28:23]
jcarlo :
@ender @jezzab is working on Mavic Air. So I would wait for now.
[2018-03-07 16:38:09]
ender :
Thanks, will do!
[2018-03-11 18:12:51]
william.harris :
Okay, I’ll just go for it: my attempts to generate any sort of module-mixed custom firmware, either manually or using CherryPicker, result in a .bin file that pyduml and DroneZBreak both read as invalid. I’d initially just been trying to remove 305 and 306 from 900, but I’ve experimented with various combinations, and I run into this same issue even if I’m using a completely stock set of .sig and .cfg files for, say, 300. Not sure where I’m going wrong. It’s probably a stupid mistake, as while I’m decently technical I’m new in this particular area. Any help would be appreciated. And thank you. :slightly_smiling_face:
[2018-03-11 18:13:25]
kilrah :
correctly making an uncompressed tar with them?
[2018-03-11 18:13:26]
william.harris :
This is for a Spark, I should mention.
[2018-03-11 18:14:36]
william.harris :
I believe so. I get no errors from CherryPicker, and I’ve looked at the tar command in the source and read up on it.
[2018-03-11 18:14:53]
kilrah :
tarring the files and not the folder?
[2018-03-11 18:17:35]
william.harris :
Hmm. That may very well be it. Like I said, possibly stupid error. Any other potential issues? The wiki blurb made it seem fairly straightforward, which is why I was surprised I couldn’t get it working.
[2018-03-11 18:18:56]
william.harris :
Though that’d imply CherryPicker’s code is incorrect (unless I screwed up the folder hierarchy in some way that didn’t cause it any obvious errors), and I’d not seen anyone raising issues with it.
[2018-03-11 18:19:44]
william.harris :
Unless I’ve got some system-wide config for tar set that of which I’m unaware that’s throwing a spanner into the works.
[2018-03-11 18:20:23]
kilrah :
just extract the file again and it's obvious enough what it's made as...
[2018-03-11 18:21:22]
william.harris :
Extracting the file again makes it appear to follow the exact same structure as stock firmware does when extracted.
[2018-03-11 18:21:49]
william.harris :
And the hashes for the individual files match up between the two.
[2018-03-11 18:22:16]
kilrah :
don't know then. what's the error you get exactly
[2018-03-11 18:24:01]
william.harris :
In DroneZBreak, just that the firmware is invalid. Pyduml doesn’t seem to see the file, despite it being named and located correctly (I think). I’ll need to look more closely at logs to see if there’s more information available on where things are choking.
[2018-03-11 18:24:07]
royeiror :
aren't the modules for spark different than the ones for Mavic?
[2018-03-11 18:25:01]
royeiror :
meaning the numbers are not the same
[2018-03-11 18:25:21]
william.harris :
I don’t follow.
[2018-03-11 18:26:14]
royeiror :
I think I recall that the FC modules for Mavic are 305 and 306 but for spark they are something else entirely
[2018-03-11 18:27:05]
william.harris :
I’ll need to check that, but this is happening even if I make no fundamental differences to the selection of modules. Like, tarring up the exact same .cfg and .sigs that’d be in a stock firmware .bin I’d just extracted, the new .bin won’t be read as valid.
[2018-03-11 18:28:22]
royeiror :
odd, are you using 7zip?
[2018-03-11 18:28:26]
william.harris :
I’m on OS X.
[2018-03-11 18:29:02]
william.harris :
I’ve tried with the built-in archive utility, a couple of third-party ones, and gtar in the Terminal.
[2018-03-11 18:29:41]
royeiror :
do you have a windows pc handy?
[2018-03-11 18:29:45]
william.harris :
Homebrew installed, not the built-in. The same one the CherryPicker uses.
[2018-03-11 18:29:50]
william.harris :
I do not, unfortunately.
[2018-03-11 18:29:58]
quad808 :
305 + 306...same across firmwares
[2018-03-11 18:30:15]
quad808 :
naming that is. Will H. you are overthinking this.
[2018-03-11 18:30:49]
kilrah :
filename ending in _dji_system.bin?
[2018-03-11 18:31:27]
quad808 :
Get the .900 .bin. Delete .305 and .306. Use 7zip. save it. Done.
[2018-03-11 18:32:28]
william.harris :
It’s supposed to be that simple, yes. 7zip isn’t on OS X. No OS X tool I’ve tried seems to result in a valid file, nor does doing it on the command line.
[2018-03-11 18:34:42]
william.harris :
Let me put this a different way: have folks successfully been able to remove .305 and .306 from .900 – or create any .bin – on OS X, and then flashed it to a Spark, without issue? If so, did you have to do anything particularly crafty or unusual to get it to work?
[2018-03-11 18:35:22]
kilrah :
not using osx for that...
[2018-03-11 18:35:29]
william.harris :
(Also, thank you for the feedback and suggestions. Much appreciated. I was futzing with this yesterday and haven’t taken a crack at it today.)
[2018-03-11 18:35:50]
quad808 :
grab it. Let me know when. Then I will delete it.
[2018-03-11 18:36:47]
william.harris :
Thank you. Much appreciated. I’m slightly disappointed, though, that this way I won’t solve whatever mistake I’m making. I’m aiming to learn.
[2018-03-11 18:37:03]
william.harris :
And I have it now.
[2018-03-11 18:38:41]
kilrah :
do the opposite then, post one of your output files for people to look at, hopefully the mistake will be obvious for someone.
[2018-03-11 18:40:23]
william.harris :
That’s a very good idea, thank you. I’ll take another shot at it later today and if I’m still having problems I’ll post it here.
[2018-03-11 20:49:43]
william.harris :
**headdesk** @kilrah called it – both CherryPicker and I were tarring the folder, not the files. Thank you for pointing out what should have been abundantly obvious to me. I will be in the Corner of Shame as soon as I finish flashing the new firmware.
[2018-03-11 20:52:05]
william.harris :
… or not. It’s back to misbehaving.
[2018-03-11 21:01:25]
william.harris :
Okay. Combination of tarring the folder not the files, using built-in tar and not homebrew gtar, and OS X mucking about with the directory structure if I delete files via the GUI and not the terminal. Seems to be behaving now. Fingers crossed.
[2018-03-11 21:58:08]
william.harris :
Okay. Last annoying question, I swear (for now): easiest way to verify the module versions installed on the Spark? Mixed-module firmware seemed to take, and it’s now rooted.
[2018-03-11 22:01:02]
william.harris :
Whatever sigs are in /data/upgrade/backup, I’d imagine?
[2018-03-11 22:13:02]
quad808 :
\AppData\Roaming\DJI Assistant 2\log They get created every time you connect up with Assistant. Not sure where they are on iOS.
[2018-03-11 22:17:38]
william.harris :
Cheers.
[2018-03-12 08:56:57]
awwhat :
Most of the mavic modes are working on my Spark, except for Follow Me - it initialiazes, says everything is good, but when I hit engage it just drops out of the flight mode back to manual control. Patched DJI Go 4.1.15, LG G5 phone. Anyone else have this issue, is there a solution? Should I try 4.1.14? The rest of my android devices are too feeble to be worth trying, unfortunately...
[2018-03-14 13:12:37]
fredmicrowave :
I have a doubt : If i root and downgrade from (say) .1000 to .0400 , will i get rid of 905?
[2018-03-14 13:13:41]
nocommie :
no
[2018-03-14 13:14:34]
validat0r :
you would get an earlier 905 I suppose
[2018-03-14 13:15:21]
fredmicrowave :
Ok Thanks. I understand .0400 had no 905 .
[2018-03-14 13:15:53]
nocommie :
905 doesn't matter. It is the NFZ DB that 905 installs. The DB is not removed when you downgrade. 400 ignores the DB but anything later will use it.
[2018-03-14 13:17:28]
fredmicrowave :
I see, Thanks as lot. So deleting 905 in .400 and upgrading will not resolve either...
[2018-03-14 13:18:25]
nocommie :
there is no 905 in 400. Once you install ANY FW that has 905, downgrading etc will not remove it. The only way is to root and delete the DB manually.
[2018-03-14 13:23:20]
fredmicrowave :
Ok. I was referring to removing manually as downgrading didn´t do it...
Is there some more info somewhere about removing db?
[2018-03-14 13:24:25]
nocommie :
Check the FAQ in the !wiki
[2018-03-14 13:24:40]
fredmicrowave :
Will do. Thanks a lot.
[2018-03-15 03:59:32]
critterrzz :
Any mods for 1.22 noseceo to make otg work proper with Spark?
[2018-03-15 04:03:32]
lolo780 :
Not that I've seen yet
[2018-03-15 04:21:02]
critterrzz :
Would be nice so I can use Spark and Mavic
with 1 device. Wonder what the difference is between 115 and the later ones?
[2018-03-15 04:26:26]
lolo780 :
Pano
[2018-03-15 04:26:54]
lolo780 :
That's why I changed to 1.22 anyways. Been using WiFi rc connect for the spark
[2018-03-15 04:27:06]
lolo780 :
Seems to work fine
[2018-03-15 04:29:33]
critterrzz :
Don't trust WiFi with android..and I want to stay with no sign in app. Mostly lakes where I fly..no room for disconnect :slightly_smiling_face:
[2018-03-15 13:53:09]
standfast2 :
Im looking for help with what might be an andoid only issue, I seemed to be getting a constant loop of Enhanced Warning Zone which requires a box ticked to accept responsability. This happens at the start of every flight, which is fine, but after a short while and what seems to be the possible trigger for this pop-up loop is a random app crash, which once restarted produces the pop-up in a continues loop until either I stop moving (hover) or land, otherwise it keeps returning after ticking and confirming etc
[2018-03-15 13:55:47]
standfast2 :
Dji go app 4.1.22 (Patched) FW 1.4.300 (Mixed Module) Rooted etc
[2018-03-15 13:56:23]
standfast2 :
Looking in the NFZ log in Go app: d: 2018-03-14 18:29:44: Manager start check logic.
d: 2018-03-14 18:29:44: Start check area nearby! Pos: 57.48879381904748 -4.233809962174078
d: 2018-03-14 18:29:44: ***into controller no 1860***
d: 2018-03-14 18:29:44: Check finished, num: 4
d: 2018-03-14 18:29:44: Manager check finished, size: 4
d: 2018-03-14 18:29:44: Ready to send to remote, size: 1
d: 2018-03-14 18:29:44: Ready to send to remote, size: 1
d: 2018-03-14 18:29:44: Refresh map marker, pos: 57.4887931570394 -4.233810257939354
d: 2018-03-14 18:29:44: GMap start rendering ignored warning area, size: 4
d: 2018-03-14 18:29:45: AMap finished rendering!
d: 2018-03-14 18:29:45: sendFlyForbidDataToMc end success, index=1
d: 2018-03-14 18:29:45: Refresh map marker, pos: 57.48879309283962 -4.233810229382707
d: 2018-03-14 18:29:45: GMap start rendering ignored warning area, size: 4
d: 2018-03-14 18:29:45: AMap finished rendering!
e: 2018-03-14 18:29:46: fetchPolygonTfrs has no network connected
e: 2018-03-14 18:29:46: compareUuid local not exist uuid
[2018-03-15 13:57:31]
standfast2 :
Im wondering if the popup is this: "sendFlyForbidDataToMc end success, index=1"
[2018-03-15 13:58:08]
standfast2 :
and if I can go about removing the command to display it
[2018-03-15 13:59:35]
standfast2 :
@standfast2 uploaded a file: [28619297_1654820237932644_2227957682745280509_o.jpg](https://dji-rev.slack.com/files/U9QD5A9FW/F9QBG34TV/28619297_1654820237932644_2227957682745280509_o.jpg)
[2018-03-15 14:24:39]
jcarlo :
You’re probably entering a yellow zone
[2018-03-15 14:40:43]
standfast2 :
Yup, it is
[2018-03-15 14:42:41]
nocommie :
This has been a pain in the ass for me as well. Fucking DJI's nanny bullshit. I fly a lot in an area (way out in the country away from anything) that DJI has set incorrectly as a warning zone. The popup just keeps coming up while flying. Very annoying. There is nothing publicly available to fix this on later apps. The only way is to use FW 700 (mixed mods if you like) and 4.1.3 with the NFZ patch. the patch is kinda hard to find but if you look around you can find it.
[2018-03-15 18:28:54]
quad808 :
@standfast2 solution. Buy NLD and give some love back. NLD has NLD GO 4.1.3 with NFZ removed with the patch.
[2018-03-15 18:33:36]
standfast2 :
Yeah totally agree, I didnt really investigate the cons of ownership prior to buying. For me im not sure that FW700 will work as its a platinum and I was under the impresion that the NFZ ie module 905 were hard-wired (so to speak) into the aircraft. I had been running 700 but another issue was the platinums esc's were producing an rpm error, obviously because I was using a FW which was made long before the platinum and its different escs. The patched go 4.1.22 got rid of that :slightly_smiling_face:
[2018-03-15 18:35:11]
standfast2 :
I will look for the 4.1.3 and try as you said, I dont mind paying for the NLD either to be honest. I feel ive gone so far down this rabbit hole and im almost at a point of all-round satisfaction
[2018-03-15 18:41:09]
quad808 :
@standfast2 You would still have the correct ESC firmware, even if you downgraded, since the hardware id is different, so the 700 firmware would skip the lower esc firmware from overwriting. If you go to 4.1.3, I am pretty sure the RPM error will come back. I don't think that was patched with that patch.
[2018-03-15 19:03:19]
bin4ry :
Well if you are diving into it you can redo the nfz patch for 22. Some people already did it :smirk::wink:but for obvious reasons such things are non public
[2018-03-15 19:04:38]
bin4ry :
Once one does involve themselves into the work people become more open in discussions
[2018-03-15 19:05:01]
bin4ry :
So tldr: get your hands dirty and you will get love back from the community
[2018-03-15 19:05:46]
standfast2 :
I guess I am, the fact that id opened it up to put an sd card into it and unlock etc, that was the point of no return/warrenty and I did that in the first week lol
[2018-03-15 19:05:55]
bin4ry :
Hehe
[2018-03-15 19:06:29]
bin4ry :
Then do it :wink:
[2018-03-15 19:06:45]
bin4ry :
Start taking apart the app and try to contribute
[2018-03-15 19:06:50]
bin4ry :
Or find your own niche
[2018-03-15 19:06:56]
bin4ry :
Everyone is welcome
[2018-03-15 19:07:27]
standfast2 :
I barely have basic commands in dos lol, im no scripter
[2018-03-15 19:07:35]
standfast2 :
but I will look into it
[2018-03-15 19:07:41]
bin4ry :
Sure
[2018-03-15 19:07:47]
bin4ry :
Start with Linux directly
[2018-03-15 19:07:49]
bin4ry :
Lol
[2018-03-15 19:08:06]
bin4ry :
The Linux patcher has more stuff included
[2018-03-15 19:08:35]
bin4ry :
Also the patches are done on a smali level
[2018-03-15 19:08:38]
bin4ry :
No scripting needed
[2018-03-15 19:09:30]
bin4ry :
Only patching the bytecode directly
[2018-03-15 19:09:32]
bin4ry :
Lol
[2018-03-15 19:09:36]
bin4ry :
:joy:
[2018-03-15 19:10:23]
standfast2 :
hmmm, you make it sound easy. Is that some kind of Android code?
[2018-03-15 20:54:17]
standfast2 :
I take it patching 4.1.3 using deejayeye-modder doesnt contain the NFZ patch file? Also how can I implement FCC-Boost instead of just FCC Force?
[2018-03-16 01:02:17]
ben_lin :
@standfast2 currently you cant boost on later apps
[2018-03-16 09:28:16]
standfast2 :
I could either patch apps and run with force Fcc or use boost config file but no other benefits of patching etc.
[2018-03-16 09:32:48]
standfast2 :
I know nothing about Linux, so which version do I need? Then what software do I need to edit patches?
[2018-03-16 23:34:06]
artema :
So if I do some experiments on my mavic pro, how likely am I to brick it? Are there any unbrick options then?
[2018-03-16 23:48:41]
w4t3r :
Depends on how you try to and how you brick it lol
[2018-03-16 23:48:53]
w4t3r :
If you change fw parameters or stuff like that you can always reset it
[2018-03-17 00:08:00]
artema :
Is it possible to brick it by loading bad firmware? Doing stuff in adb/root shell? Or will some kind of bootloader/recovery mode always survive?
[2018-03-17 00:10:09]
artema :
Just trying to understand what I can safely play with and where I need to be careful.
[2018-03-17 00:15:34]
w4t3r :
Uh, I dunno about the mavic tbh. On the good old phantom 3 you could fuck pretty much everything up because the camera encode chip could load and flash firmware from the sd card, but I think that's no longer possible
[2018-03-17 00:17:02]
w4t3r :
So probably you'll need the android system at least working (to upload new fw) and maybe the fc (to receive DUML commands to start the upgrade?). I've no idea but I assume so.
[2018-03-17 00:18:01]
w4t3r :
Just don't brick it, and if you do you can always reflash the chips manually either with the debugging pads on the board or by desoldering them
[2018-03-17 02:44:47]
jezzab :
generally the device wont load a firmware thats not compatible or if you change a `.sig` file it will break the signing and not load it.
[2018-03-17 02:44:48]
jezzab :
BUT
[2018-03-17 02:45:20]
jezzab :
There was a guy with a P4P a long time ago that flashed a P4 firmware it. Surprisingly it did actually load most of it :confused:
[2018-03-17 02:45:43]
jezzab :
In root shell you can certainly break stuff and it wont always recover (depends on the Android OS version)
[2018-03-17 02:46:48]
jezzab :
what "experiments" are you looking at doing @artema?
[2018-03-17 09:13:50]
2841154131 :
stupid question again
[2018-03-17 09:13:56]
2841154131 :
is there any way I can remove the limits without downgrading the firmware ?
[2018-03-17 09:14:03]
2841154131 :
Mavic Pro
[2018-03-17 09:14:05]
2841154131 :
Rooted
[2018-03-17 09:39:11]
jezzab :
Might wanna mention what firmware you are on dude
[2018-03-17 09:41:47]
2841154131 :
4.300
[2018-03-17 09:46:22]
2841154131 :
there is someone in a chinese community selling a service that removes the restrictions made by dji
[2018-03-17 09:46:55]
2841154131 :
Description:
[2018-03-17 09:46:57]
2841154131 :
Multiple models [supported.No](http://supported.No) tearing-down required.Does no harm to the warranty.
Very impressive.
1.After removing [some limits],You can fly all over the world without any restriction.
2.No height limit.
3.RC signal strenth doubled.
4.Restore whenever you want to.
[2018-03-17 09:47:28]
2841154131 :
I wonder how this could happen
[2018-03-17 09:49:59]
2841154131 :
and it says there is no need to downgrade.
[2018-03-17 10:49:59]
artema :
@jezzab I don't have a specific plan, want to explore first :wink:
[2018-03-17 10:50:03]
artema :
Thanks for the answers!
[2018-03-17 14:16:26]
ender :
Interesting, how much does he charge ?!
[2018-03-17 14:24:50]
2841154131 :
200 Chinese Yuan(31.59USDollars) per device
[2018-03-17 14:43:36]
jezzab :
Sounds like he's selling the app
[2018-03-17 18:30:39]
evgeniychuiko :
@artema there's many variants to brick your mavic. I did it three times. If you wanna be risky, please make full emmc dump for your core board. And don't mix fw around 1.03.1000.
[2018-03-17 18:37:16]
evgeniychuiko :
Be careful, no emergency restore. Android has auto recovery, but it's full shit. It can stuck in recovery, I had these situations many times.
[2018-03-17 21:29:40]
artema :
@evgeniychuiko Thanks! As I understand, dealing with emmc means desoldering it? This is beyond my capabilities, unfortunately.
[2018-03-17 21:30:33]
artema :
I guess I'll just play with the less risky stuff for now :wink:
[2018-03-17 22:42:12]
lolo780 :
Desoldering is the easy part
[2018-03-17 23:25:51]
artema :
Right, I realize that reballing and resoldering is probably harder, I can't do either.
[2018-03-17 23:26:51]
artema :
One idea I have is to fix the annoying low battery/RTH beeps in the RC, make them less annoying
[2018-03-17 23:32:22]
lolo780 :
I use a heat gun and tap the board on the edge of the bench. (To salvage parts)
[2018-03-18 07:44:20]
evgeniychuiko :
Make dump you can with adb pull
[2018-03-18 07:47:05]
evgeniychuiko :
And if android will be completely bricked, there's a way to upload this dump after, without reflow emmc chip
[2018-03-18 07:49:30]
evgeniychuiko :
But it's really hard work, and need skills.
[2018-03-18 07:50:30]
evgeniychuiko :
Much better way - ask BEFORE you do;)
[2018-03-18 08:00:01]
evgeniychuiko :
@artema for RC buzzer silent three ways. Hardware, modify 600 module, or modify hdvt_gnd file
[2018-03-18 08:02:30]
artema :
I pulled every file with adb already, but not sure how I'd use that in case it gets bricked. Please give some pointers!
[2018-03-18 08:04:11]
artema :
For buzzer, I don't want to silence it, but rather make it either quieter or make the beeps shorter. I still want to hear it, I just don't want the whole neighborhood hear it ;) thanks for the pointers on that, I'll check these.
[2018-03-18 08:09:39]
evgeniychuiko :
Dump means pulling raw dump for whole mmcblk0. We have sdio points on board for emergency restoring this dump after, with some tricks.
[2018-03-18 08:11:17]
evgeniychuiko :
If you want to make it quieter, only HW mod
[2018-03-18 08:17:40]
artema :
All right, I'll pull the dump too and ask about the tricks in case I end up bricking it. Thanks @evgeniychuiko
[2018-03-19 16:45:12]
standfast2 :
When looking in the (country code) log file in the go app I noticed this; 2018-03-17 01:37:17:624 E: DJIProductManager=Tomato【国家码设置（set）】开始,参数手机是否支持5G=false,国家码=US is motor up=false
2018-03-17 01:37:17:628 E: pType isRemoteSeted=false pType=Tomato DJIUpStatusHelper.isUpProgressing()=false DJIActiveLauncher.isInActive()=false sn=true
2018-03-17 01:37:17:631 E: 直连、升级中或者激活中或者sn为空，取消设置国家码
2018-03-17 01:37:17:635 E: Going to use fake function to always return US MCC: Call to fake function which will always answer with US MCC
im not sure but i thought the log file normally came up as just country"US" and FCC would be enabled, I've not seen this "fake function" speil before....is this to be expected?
[2018-03-19 16:46:41]
bin4ry :
yes
[2018-03-19 16:46:45]
bin4ry :
this is what the patch does
[2018-03-19 16:46:49]
bin4ry :
it injects US
[2018-03-19 16:47:01]
bin4ry :
"Going to use fake function to always return US MCC: Call to fake function which will always answer with US MCC"
[2018-03-19 16:47:08]
bin4ry :
isn't it self-explaining ? :smile:
[2018-03-19 16:47:37]
bin4ry :
some function needs to answer with a fake reply right? so that is it
[2018-03-19 16:47:48]
bin4ry :
and i added some nice log output to it too so you can udnerstand it :wink:
[2018-03-19 16:48:53]
jakub :
@bin4ry append "... you don't have to ask about this message on Slack!"
[2018-03-19 16:49:03]
bin4ry :
:smile:
[2018-03-19 16:49:23]
bin4ry :
nono, i answered the question. all fine :wink:
[2018-03-19 16:49:36]
jakub :
we'll see after 100 more questions :laughing:
[2018-03-19 16:51:09]
bin4ry :
i honestly think i answered more than 100 questions :smile:
[2018-03-19 18:12:56]
standfast2 :
It's annoying I know a newbie not following protocall :upside_down_face: I have been reading your progress right back from last Easter etc to try and fill in gaps and understand better, I can see folks asking the same questions and how tedious it is when they aren't doing almost any investigation themselves. Im trying not to be one of those despite my seemingly obvious questions.
I interpreted the log as dji somehow recognising the fake function etc, as the log seemed to be full of comms which I don't understand fully what they are...
Ill fall back in line..:+1:
[2018-03-20 18:44:09]
ender :
BTW. does anyone now if the ESC’s on the Mavic Air are capable of producing “near sine wave” or more like the trapezoid wave form of the “old” Mavic Pro” ?
[2018-03-20 18:49:53]
kilrah :
page says "FOC ESCs and Propulsion"
[2018-03-20 18:50:09]
kilrah :
so supposed to be new ones
[2018-03-20 18:51:06]
ender :
Okay, so hope is not lost that they manage to get the noise down at least with new props.
[2018-03-20 18:51:26]
ender :
I really love the Air in all other aspects…
[2018-03-20 19:58:27]
arbilcom365 :
@fredmicrowave Did you ever find out how to remove the 0905 db off the mavic pro with root access?
[2018-03-20 20:06:10]
arbilcom365 :
I believe I found them, but I wanted to verify with someone who has done it. Inside of the Drone /data/nfz/ lives the nfz.db and nfz.sig. In order to remove the version that would of come with 1.3.1000 firmware, do I need to delete those files and reflash to 1.3.0400 firmware
[2018-03-20 22:00:04]
quad808 :
@arbilcom365 Once you remove those files, you can use mixed to any firmware, but just remove the .0905 module each time, or it will come back. 01.03.0400 doesn't have .0905.
[2018-03-20 22:00:31]
quad808 :
Check the backup dir also and remove the .0905 firmware module backup
[2018-03-20 22:04:53]
arbilcom365 :
@quad808 Thank you for the help.
[2018-03-20 23:10:36]
zule :
Zahif - in my experience you need to downgrade to 1.03.0400 and then upgrade to whatever you want removing 304,305,and 905
[2018-03-20 23:10:55]
zule :
just deleting the files for me I found that every reboot they "restored" themselves
[2018-03-20 23:11:42]
quad808 :
this is why you delete from backup
[2018-03-20 23:11:52]
zule :
it wasn't in backup for me.
[2018-03-20 23:11:59]
zule :
his case could be different
[2018-03-20 23:12:06]
quad808 :
Did you use the stock GO app?
[2018-03-20 23:12:16]
zule :
I think that only shows up if you used the duml method to backup?
[2018-03-20 23:12:23]
zule :
no, modeed
[2018-03-20 23:12:26]
zule :
modded*
[2018-03-20 23:12:29]
zule :
can't spell
[2018-03-20 23:14:11]
quad808 :
There is a backup dir on the bird that has the last flashed firmware modules in there. It gets restored from the .0905 module that is there, if it's missing. Nothing to do with running any backup.
[2018-03-20 23:16:00]
zule :
on mine that backup directory was empty.
[2018-03-20 23:19:37]
fredmicrowave :
@arbilcom365 I did not try it yet ( bird is not ready) , but found instructions on how to do it on wiki with DUMLracer cmd .
[2018-03-20 23:26:07]
arbilcom365 :
@zule I am running everything now, going through the process. As soon as I get to 1.4.0000 I will test my flights. If all goes well I will update
[2018-03-21 00:50:59]
arbilcom365 :
After deleting the /data/nfz/nfz.db, /data/nfz/nfz.sig and the /data/upgrade/backup/wm220_0905_v00.00.01.04_20170301.pro.fw.sig; I flashed the FW to .0400, then to .0700 with the 0905 module removed. I made my parameter changes, and flashed the 1.04.0000 with the 0305, 0306 and 0905 modules removed. I updated my controller to the 1.04.0000 and used my 4.1.14 patched apk. I am still unable to take off due to nfz. I looked at the databases in the app and I am showing the same information as before. AC db is 01.00.01.09, App db is 01.00.01.07, basic fly safe db is 01.00.01.05; I dont know if I am missing a part of the nfz within the drone itself or if there is something on the phone that is causing it.
[2018-03-21 02:05:11]
quad808 :
@arbilcom365 Its the GO app. There are checks running. Try take off with 01.03.0400 and see...then try 01.03.0700. You should be able to with 4.1.14. If you really want the least NFZ possible, it's .0700 with .0905 removed, (or 01.03.0400 stock) and 4.1.3 GO with NFZ removed. (if you can find it)
[2018-03-21 02:24:04]
jezzab :
You didnt answer 'Yes' when it told you it needed to update the NFZ db did you? @arbilcom365 If you did it will push the `0905` nfz DB back on
[2018-03-21 04:39:35]
jcarlo :
@arbilcom365 if you made your parameters changes in 700 then updated to a modded 4.0000. You might want to check the parameters again. Sometimes they get reset.
[2018-03-21 10:01:12]
arbilcom365 :
I will continue to test, downgrade and work the .0700 with 4.1.14 solution. I am pretty careful to always hit ignore if it asked do update any database in the app and I reviewed my parameters on Version 1.04.0000 to ensure that they were still there from .0700
[2018-03-21 14:29:33]
jcarlo :
@arbilcom365 one last thing. If you are not doing it already. Try turning the Mavic in this sequence. RC>Mavic>App.
[2018-03-21 14:50:21]
arbilcom365 :
@jcarlo So i am still showing the NFZ and the cant take off errors. I think either i missed something in the drone, which i am unsure where as i have removed the 3 files, or the apps that I am using have the NFZ in them which I am currently reading and searching for the locations in order to remove them.
[2018-03-21 15:15:40]
fredmicrowave :
Did you try to turn off GPS on you phone/tablet, to help pinpoint the problem ?
[2018-03-21 15:43:00]
arbilcom365 :
yes, Phone is in airplane mode, with location services turned off
[2018-03-21 15:48:44]
arbilcom365 :
I believe my aircraft nfz database is being held someone else that the apps are pulling information from
[2018-03-21 15:48:51]
arbilcom365 :
somewhere*
[2018-03-21 15:52:29]
fredmicrowave :
And you did edit parameters, right ?
[2018-03-21 15:54:09]
arbilcom365 :
yes, everytime I have flashed a firmware, i pull up my parameters via DJI Assistant 1.1.2 in debug mode. Verify all of the changes are still there and then test take off.
[2018-03-21 15:54:42]
pingspike :
@arbilcom365 are you running app 4.1.14?
[2018-03-21 15:55:27]
arbilcom365 :
yes, i took the 4.1.14 from slack repo, ran the deejayeye patching tool and install the modded apk to the phone
[2018-03-21 16:03:30]
arbilcom365 :
It looks like the 4.1.14 app database shows version 01.00.01.07. I just did a install on a phone i havent used yet.
[2018-03-21 16:04:00]
evgeniychuiko :
@arbilcom365 Are you able to take off without smartphone?
[2018-03-21 16:05:19]
arbilcom365 :
@evgeniychuiko Using another android device with the app?
[2018-03-21 16:06:07]
evgeniychuiko :
Without any devices
[2018-03-21 16:09:11]
arbilcom365 :
no, I get the NFZ on the controller
[2018-03-21 16:11:25]
evgeniychuiko :
Ok. Have you tried to start motors even with this nfz warning?
[2018-03-21 16:12:46]
arbilcom365 :
yes, just made an attempt with the controller by itself. pushed both sticks down and motors dont turn over
[2018-03-21 16:16:18]
arbilcom365 :
currently, im downgrading again to .0400 on both drone/controller and will test again to see if i can get this thing in the air.
[2018-03-21 16:28:44]
jcarlo :
Hmm weird the NFZ parameters in the Mavic should override the app
[2018-03-21 16:35:07]
pingspike :
yeah confirmed, my .700 Mavic (with parameters altered) allows me to take off in NFZ, the GO4 app is not happy, but I can take off
[2018-03-21 16:35:44]
pingspike :
(I forget which app version, whatever the latest is on CrystalSky)
[2018-03-21 16:36:52]
evgeniychuiko :
@arbilcom365 I believe you did something wrong. When "airport" parameter is set in 700 (305+306) it will fly even with nfz errors and warnings
[2018-03-21 16:36:53]
pingspike :
talking of which, anyone want to take this on? <https://github.com/Bin4ry/deejayeye-modder/issues/43>
[2018-03-21 16:37:50]
pingspike :
I know @kilrah will be happy :smile:
[2018-03-21 20:00:33]
lolo780 :
Authorization granted
[2018-03-21 20:30:26]
arbilcom365 :
So i have rolled the drone/RC to .0400 then to .0700. The /data/nfz directory is still empty but the drone is showing the nfz with just the controller and no app or device connected. Is it possible that the drone nfz db could be hiding anywhere else
[2018-03-21 20:40:28]
kilrah :
The RC always displays it even with everything gone and disabled. Probably due to the minimal DB that's hardcoded in FC firmware (red only). But as long as the parameter is set right it doesn't actually enforce anything.
[2018-03-21 22:04:48]
arbilcom365 :
could someone who has access to their nfz.db that comes from the .0700 firmware, let me the size of their file. Wanted to compare with the one I have.
[2018-03-21 23:06:12]
arbilcom365 :
I just flashed the 1.03.1000 that came with the drone out of the box and was able to get the motors on. I started reading and found the SD card issue that is supposed to prevent roll backs of firmware. I am wondering if this could have kept the motors from turning on after the firmware flash to .0700 and .0400
[2018-03-21 23:06:46]
arbilcom365 :
I did inspect the serial number and it looks like the manufacture date is SEP 25 2017
[2018-03-21 23:23:30]
evgeniychuiko :
It means you had another error than nfz, and confused us
[2018-03-21 23:33:57]
arbilcom365 :
missing SD card in the slot, i will put a 16GB in now
[2018-03-22 00:24:33]
quad808 :
Don't need a big card, 4g or 8g is big enough
[2018-03-22 00:42:52]
arbilcom365 :
it was the smallest one i had....I am happy to report Success on the flying now to follow your lead @quad808 and try to get rid of some of the errors on the app
[2018-03-22 00:43:13]
arbilcom365 :
Thanks to everyone that helped me through this trying time...This community is awesome
[2018-03-22 07:50:45]
ender :
Great turnout Zahif, tough luck !!!!
[2018-03-22 22:41:06]
arbilcom365 :
I haven't seen much about rooting the RC although I did see that it is possible through DUMLRacer. What kind of benefits can you gain from it
[2018-03-22 22:44:55]
kilrah :
nothing unless you want to do analysis on the binaries it contains
[2018-03-22 22:46:21]
arbilcom365 :
good to know
[2018-03-22 23:01:57]
arbilcom365 :
can anyone confirm the Activate Mavic via DUMLdore still functioning?
[2018-03-22 23:02:51]
validat0r :
i'd love to root my spark RC, but i'm dont know how
[2018-03-22 23:04:12]
arbilcom365 :
are you familiar with the DUMLdore program?
[2018-03-22 23:04:30]
validat0r :
sure
[2018-03-22 23:04:32]
validat0r :
why?
[2018-03-22 23:05:54]
arbilcom365 :
i miss read you statement, did you try to use the racer with the spark RC?
[2018-03-22 23:06:31]
validat0r :
no
[2018-03-22 23:08:40]
arbilcom365 :
is your remote the GL100A
[2018-03-22 23:09:59]
validat0r :
yes
[2018-03-22 23:11:27]
arbilcom365 :
i have only messed with the Mavic RC which is the GL200
[2018-03-22 23:11:29]
arbilcom365 :
A
[2018-03-22 23:11:43]
arbilcom365 :
might be worth trying the DUMRacer to see if it works
[2018-03-22 23:20:01]
validat0r :
GL100A doesnt provide a COM port via USB, as far as I can see
[2018-03-23 00:51:34]
jezzab :
Its done via Wifi
[2018-03-23 00:52:00]
jezzab :
You connect to the Spark RC's wifi AP
[2018-03-23 01:10:26]
validat0r :
@jezzab i guess u mean dumldore .. i don't see any wifi mode for dumlracer
[2018-03-23 01:10:38]
jezzab :
Yes
[2018-03-23 16:06:24]
pingspike :
!nfz
[2018-03-24 17:54:32]
kirbyman :
Hello, are you able to advise as to where I can download - 4.1.22_V3028592-nosecneo
[2018-03-24 18:01:28]
validat0r :
!apk
[2018-03-24 18:11:11]
kirbyman :
you rock!
[2018-03-28 11:42:41]
t3rm1 :
i patched the 4.1.22 apk and when i try to install it on android 7.1.2 it tells me that there is an error parsing the apk. does anyone know why this happens?
[2018-03-28 11:43:28]
t3rm1 :
i decompiled the patched apk and there is no uses-sdk tag in the AndroidManifest.xml. could it be that?
[2018-03-28 11:52:50]
peter.leckarsch :
Try to deinstall your actually installed dji go4 app
[2018-03-28 11:53:26]
t3rm1 :
isnt it possible to have both installed?
[2018-03-28 11:56:28]
validat0r :
possible but unwise (according to OGs)
[2018-03-28 11:57:52]
t3rm1 :
ok i'll give it a try
[2018-03-28 11:59:47]
t3rm1 :
did not work. same parsing error. i verified that the checksum is the same on the pc so that there is no copy error.
[2018-03-28 12:00:37]
t3rm1 :
also, solid explorer cannot show infos about this apk. so something is broken but i got no errors at all when patching it
[2018-03-28 12:01:27]
jezzab :
You don’t have Go3 installed do u?
[2018-03-28 12:01:55]
t3rm1 :
no
[2018-03-28 12:01:59]
jezzab :
Ok
[2018-03-28 12:02:27]
t3rm1 :
i can open the apk on desktop with winrar
[2018-03-28 12:02:44]
jezzab :
Yes an apk is basically a zip file
[2018-03-28 12:02:50]
t3rm1 :
and decompiling again with apktool worked
[2018-03-28 12:03:22]
validat0r :
whats you RunMe.sh cmdline?
[2018-03-28 12:03:53]
t3rm1 :
oh let me check if its still in history. patached 1 week ago
[2018-03-28 12:04:18]
validat0r :
so this error didn't occur 1 week ago?
[2018-03-28 12:04:38]
t3rm1 :
i was on holiday. i was never able to install it
[2018-03-28 12:04:49]
t3rm1 :
and just got back to it trying
[2018-03-28 12:06:22]
t3rm1 :
./RunMe.sh -c true -i true
[2018-03-28 12:10:27]
validat0r :
hmm, last time I cloned, I changed to app name in Settings.xml AFAIR
[2018-03-28 12:10:48]
t3rm1 :
i changed applabel, package and google api key
[2018-03-28 12:16:18]
validat0r :
i'm sorry. maybe try latest repo? uninstall stock Go4 app? don't clone at all? i know this kind of error pops up regularly in here, but my mind is somewhere else ATM
[2018-03-28 12:17:44]
t3rm1 :
oh ok so more people have this problem then . maybe it's related to some setting then.
[2018-03-28 12:18:10]
t3rm1 :
latest repo has only one more commit which shouldn't be related to this kind of problem
[2018-03-28 12:27:47]
validat0r :
maybe the answer is somewhere in backlog here or in ~android_apk_patching
[2018-03-28 12:46:20]
t3rm1 :
ok i solved it. as soon as i remove the clone option from the script it lets me install the apk. so something gets broken in the cloning process.
[2018-03-28 15:08:44]
tjtyler :
I think it might have something to do with the API signing but that is a guess on my part.
[2018-03-28 15:38:23]
pingspike :
hmmm
[2018-03-28 15:38:32]
pingspike :
I clone mine all the time
[2018-03-28 15:39:01]
pingspike :
I have to... it won't install on CrystalSky if I don't clone it
[2018-03-28 16:52:37]
t3rm1 :
did you do it with .22?
[2018-03-28 16:53:49]
t3rm1 :
there is not much one could do wrong with cloning set to true so i wonder what could cause the error
[2018-03-28 17:41:17]
tjtyler :
I only run a clone on CS too ... original is 4.1.14 and never updated past that and the clone is mod 4.1.14. Haven't had any issues so far. Tried to clone the 4.1.3 but got the parse error when trtying to install.
[2018-03-28 17:47:30]
peter.leckarsch :
!wiki
[2018-03-28 18:57:59]
pingspike :
@t3rm1 yes mate, cloned .22
[2018-03-28 19:25:46]
t3rm1 :
i tried it again, same error. hmm. guess i have to live without it
[2018-03-28 20:06:07]
pingspike :
Are you re-patching an already-patched apk? Or using a clean !apk ?
[2018-03-28 20:14:12]
pepeleascov :
I'm with the same issue here with the latest APK from the slackbot. If I patch it, Android says it's corrupted, sometimes it says can't parse the APK
[2018-03-28 20:15:00]
validat0r :
what kind of build system os?
[2018-03-28 20:34:18]
t3rm1 :
@rich I use the apk linked from slackbot. i patched it myself.
[2018-03-29 16:31:51]
baj710 :
Are you relieved?
[2018-04-01 02:05:38]
freddyk_1234 :
Can anyone direct me to a copy of P4P 05.600 firmware? DDD and wiki links don’t go beyond 05.300
[2018-04-01 04:50:16]
ben_lin :
just get it yourself
[2018-04-01 04:50:35]
ben_lin :
Upgrade and use dumldore backup fw
[2018-04-01 04:54:14]
jezzab :
If you could, that would be great. Then we can add it to DDD
[2018-04-01 05:13:13]
freddyk_1234 :
I thought the DUMLDore backup/save function was not reliable. If you think it ok. I will do as you suggest and provide version for DDD.
[2018-04-01 05:38:31]
jezzab :
If its a fw version that can't be backed up it will fail. If it can be backed up, it will
[2018-04-01 07:11:35]
freddyk_1234 :
@jezzab Ive got p4p 0.5.0600 firmware from backup successfully. Will I relabel as zip and give you PM with link?
[2018-04-01 07:23:45]
kilrah :
you can post link here, several of us can post where needed
[2018-04-01 07:47:17]
freddyk_1234 :
Here is link for P4P V01.05.0600 firmware relabelled as zip backed up with DUMLdore V2...Thanks and Happy Birthday @jezzab
<https://we.tl/E4m1tFyzX7>
[2018-04-01 08:10:27]
jezzab :
Cheers mate
[2018-04-01 08:10:33]
jezzab :
@cs2000 ^^^
[2018-04-01 08:10:39]
cs2000 :
@cs2000 has joined the channel
[2018-04-01 09:35:15]
freddyk_1234 :
@jezzab After i created a P4P mixed module fw i backed it up with dumldore v2. However the 1st of the modules is missing from the backup. Anything I can do? win 7
[2018-04-01 09:42:11]
jezzab :
You need to understand that the backup is just the last flash u did
[2018-04-01 09:42:18]
jezzab :
It’s not indictive of what’s on the AC
[2018-04-01 09:42:36]
jezzab :
If you flashed with a module missing it will be missing from the backup. The backup is just of the last thing/s that we’re flashed
[2018-04-01 09:45:33]
jezzab :
And making a backup of mixed is useless as it cannot be flashed mixed
[2018-04-01 09:50:43]
jezzab :
And mixed you have to flash old then skip modules u don’t want upgraded to make the mix
[2018-04-01 09:54:41]
freddyk_1234 :
Thanks. I got the mix working. Just got a bit ahead of myself.
[2018-04-01 17:03:12]
cs2000 :
Cheers @jezzab , il get it added to !ddd
[2018-04-03 13:16:14]
jackjay :
Hi, I would like to build an alternative app for my Mavic Pro, that doesn't transmit any Flight information back to DJI. How should i go about doing this? Should i intercept the information on the USB connection with the smartphone? I primarily just want to remove the flights restrictions and be able to display video on the smartphone, without transmitting flight information to the server.
[2018-04-03 13:21:16]
ender :
@jackjay: are you talking of coding your own app ? If its just for preventing “phone home” why dont you install a firewall and airgap DJI GO ?
[2018-04-03 13:21:58]
jakub :
or.. patch DJI GO application with goOffline patch :wink:
[2018-04-03 13:22:13]
ender :
or… :wink:
[2018-04-03 13:37:03]
jackjay :
@ender I want to build my own app and show only video and maybe telemetry on it. It should also remove the flight restrictions. Is there a way to fake the login so that it removes the flight restrictions? What are you reffering to with the goOffline patch? I found these two links: <https://github.com/Bin4ry/deejayeye-modder> and <https://sparkpilots.zone/threads/dji-go-4-mod-2-0-dji-go-4-mod-lite-additional-features-android-app-ver-4-1-15.3841/> . They are both using the goOffline patch right?
[2018-04-03 13:39:05]
pingspike :
@jackjay the deejayeye-modder is a tool you can use to apply whichever patches you want
[2018-04-03 13:39:22]
pingspike :
beware downloading pre-compiled APKs, such as that one on Sparkpilots
[2018-04-03 13:39:41]
pingspike :
you don't know what changes the author has done behind the scenes
[2018-04-03 13:40:36]
pingspike :
for all you know, that app may be sending everyones DJI logins directly to him... best case scenario he'll fly somewhere he shouldn't while logged in as you, worst case scenario he'll be ordering $$$ of new drones from the credit card details you have stored on [dji.com](http://dji.com)
[2018-04-03 13:43:55]
jackjay :
So i should be using the deejayeye-modder tool. What do you advice for building my own offline app without restrictions and video stream
[2018-04-03 13:45:26]
pingspike :
either deejayeye-modder or perhaps check out <https://nolimitdronez.com/>
[2018-04-03 13:46:10]
pingspike :
my comments above are just speculation - that APK may be perfectly safe - but I would not entrust my £1000 drone to it :disappointed:
[2018-04-03 13:50:40]
jackjay :
Have you ever used the nolimitdronez software?
[2018-04-03 13:51:54]
pingspike :
yes :slightly_smiling_face:
[2018-04-03 13:57:25]
jackjay :
Are there any recommendation or advice for building my own app? With fake login and no "phone home". The 'phone home' is me primary concern
[2018-04-03 14:13:17]
validat0r :
I'm not a aware of an opensource/community driven substitute for DJI GO 4
[2018-04-03 14:13:56]
validat0r :
In here we are mainly concerned with having a closer look at the stuff DJI feeds us
[2018-04-03 14:48:31]
jezzab :
Look at the DJI SDK @jackjay
Make ur own app
[2018-04-03 14:56:08]
jackjay :
Don't they still send data back to there servers when using the SDK ?
[2018-04-03 15:16:01]
pingspike :
if you're building your own app from scratch mate, you're in full control
[2018-04-03 15:18:11]
jakub :
@jackjay drone itself is not sending anything, everything goes through application
[2018-04-03 15:18:26]
jakub :
though making own app from scratch will take you like forever :slightly_smiling_face:
[2018-04-03 15:53:17]
ender :
I wwould NEVER bet on that. Use Firewall… Or use Airplane mode :slightly_smiling_face:
[2018-04-03 15:55:24]
pingspike :
probably right :smile:
[2018-04-03 17:05:51]
t3rm1 :
@rich even deejayeye-modder tool is unsafe for newer versions because you have to download the apk from !apk
[2018-04-03 17:07:04]
pingspike :
dude that's the **only** place I would download it from :)
[2018-04-03 17:09:39]
t3rm1 :
why is that? you can't be sure the modifications you mentioned haven't been done to this one too
[2018-04-03 17:10:00]
validat0r :
we trust the source
[2018-04-03 17:24:15]
cs2000 :
Lol the source is the OG’s... @t3rm1 we/they put in the hard work getting decrypted versions. Trust me, you can trust us.
[2018-04-03 17:43:30]
t3rm1 :
i do. i use them.
[2018-04-03 17:44:01]
t3rm1 :
with gooffline patch though
[2018-04-03 17:53:47]
cs2000 :
Which is made by.....
[2018-04-03 19:16:17]
jakub :
how was it again... to remove 905 from `V01.03.0700_Mavic_dji_system.bin` ? I'm getting `Not implemented` when removing module withing bin file in 7zip
[2018-04-03 19:20:51]
cs2000 :
@jakub you can do it the other way (but yeah removing the module from the FW .bin file with 7zip or something should work
[2018-04-03 19:25:54]
kilrah :
Unarchive, delete, make archive again
[2018-04-03 19:26:36]
jakub :
@kilrah it's tar? zip?
[2018-04-03 19:26:49]
kilrah :
yup
[2018-04-03 19:33:00]
kilrah :
tar
[2018-04-03 19:33:39]
jakub :
thanks @kilrah:wink:
[2018-04-03 19:59:19]
royeiror :
does anyone here have the ADB commands for removing 905 from a rooted Mavic?
[2018-04-03 21:22:10]
quad808 :
Want to remove that pesky NFZ?
from ADB Shell
mount -o remount,rw /amt
then this command
cd amt
rm -r nfz
**Also check the data/upgrade/backup dir and delete the .0905 module from the firmware backups** If .0905 is gone from the flash backups, .0905 can't be put back by the drone.
[2018-04-03 22:09:31]
royeiror :
Thanks @quad808
[2018-04-04 04:12:31]
plasma9923 :
im having trouble with NFZ's... anyone around to help?
[2018-04-04 04:16:44]
denkos73 :
<https://dji.retroroms.info/howto/dumlracer>
[2018-04-04 04:57:55]
plasma9923 :
i was able to successfully dumlrracer
[2018-04-04 04:58:27]
plasma9923 :
i rot the device, used ABD and removed the 0905 file in backups and the NFZ file in amt
[2018-04-04 04:59:05]
plasma9923 :
my problem is that i still cant take off when inside the DC NFZ
[2018-04-04 05:05:02]
paulpaws :
What FW are you on with your AC? Also you using patch go app?
[2018-04-04 07:51:48]
validat0r :
That DC nfz is huge. But the Beijing nfz is even bigger :anguished:
[2018-04-04 13:07:50]
ben_lin :
did you just know…
[2018-04-04 13:07:51]
ben_lin :
It is bigger than London
[2018-04-04 13:38:47]
jackjay :
Has anyone tried to figure out which protocol is being used for the communication between the controler and the smartphone/dji go app
[2018-04-04 13:55:34]
cs2000 :
To what end (as in, what are you hoping/trying to see, just curious)
[2018-04-04 14:00:43]
jackjay :
I want a clean app that only shows the video, removes the restrictions and doesn't "phone home", but the phone should still be able to connect to the internet.
[2018-04-04 14:03:27]
jackjay :
I want to be 100% sure there isn't any data being send out to DJI
[2018-04-04 14:04:09]
kilrah :
if you're in airplane mode there isn't...
[2018-04-04 14:04:17]
jackjay :
And i would like to build something myself
[2018-04-04 14:04:34]
jackjay :
I'dd still like my other apps, browser to be able to use internet
[2018-04-04 14:04:35]
kilrah :
or use the features of whatever phone you have to disable comms for a specific app (i love huawei for that)
[2018-04-04 14:04:48]
ender :
Transparent: we are in a circle, airgap it and you can be sure, use DJI SDK for creating your own app and you cannot be sure. Writing an app from scratch by revving the protocoll is madness…
[2018-04-04 14:05:30]
ender :
You just need to airgap DJI GO and only while flying, you wont surf while flying, right ?
[2018-04-04 14:05:59]
ender :
EDITED
[2018-04-04 14:06:19]
nocommie :
@jackjay you should contact this guy; <https://www.facebook.com/andre.louisferdinand> He has created his own app for IOS. He may be able to give you some info.
[2018-04-04 14:08:21]
jackjay :
I would like to just need to install the app and have it 'airgap', so i just need to install it.
[2018-04-04 14:08:41]
jackjay :
I'd like to have some background apps running while flying, that need internet.
[2018-04-04 14:09:45]
ender :
a firewall can do just that for you
[2018-04-04 14:09:51]
ender :
AFWall+ (root)
[2018-04-04 14:11:40]
jackjay :
@nocommie Thanks. Where did you find out that he made his own app?
[2018-04-04 14:13:06]
jackjay :
@ender Thanks, ill check it out.
[2018-04-04 14:14:01]
ender :
Its not too hard to create a basic app using the DJI SDK but as we said the SDK SDk is not to be trusted more then the DJI GO app, so unless you want to create more or different features thats a dead path…
[2018-04-04 14:14:22]
nocommie :
<https://www.facebook.com/groups/MyDjiOfficial/permalink/1792550597430134/>
[2018-04-06 14:48:07]
franknitty69 :
I rooted a mavic pro, removed the 905 and am able to fly in the DC NFZ. i'm using a custom dji go app and still get warnings. i haven't tried them, but i'll check if quickshots work.
[2018-04-07 22:06:37]
artema :
Has anyone already documented somewhere DJI's message routing system, the different target types, their messages and formats used in mavic? Dump formats?
[2018-04-07 22:07:13]
artema :
I think I've got some understanding of it, but not sure if it's worth documenting, maybe someone already did
[2018-04-07 22:08:42]
artema :
(this is what's done by duml/duss, whatever that means)
[2018-04-08 02:10:46]
ben_lin :
I think the OG has done some work on that
[2018-04-08 02:11:20]
ben_lin :
Otherwise how did we got a root?
[2018-04-08 09:16:38]
artema :
Yeah I'm sure there are others who have figured it out. The question is whether anyone has documented it publicly.
[2018-04-08 11:59:06]
evgeniychuiko :
@artema some info you can find here <https://github.com/vessial/dji>
[2018-04-08 12:00:23]
evgeniychuiko :
And here <https://github.com/o-gs>
[2018-04-08 12:02:02]
evgeniychuiko :
And here <https://github.com/MAVProxyUser/DUMLrub>
[2018-04-08 14:35:25]
artema :
Cool, thanks! Can't read chinese, but the tables and hex dumps in the preso look familiar :wink:
[2018-04-10 04:07:16]
b3he8iyzieybdamf :
Has anyone found a way to have precision landing with mixed firmware 4.100 with 3.700 FC?
[2018-04-10 08:00:32]
cs2000 :
@b3he8iyzieybdamf nope, not yet at least
[2018-04-10 08:00:57]
jezzab :
Yup. Precision land by hand :stuck_out_tongue:
[2018-04-10 11:54:04]
jakub :
what is funny... that's the only thing that is not working on mixed :stuck_out_tongue:
[2018-04-10 11:54:19]
jakub :
looks almost like some bug from DJI side hah
[2018-04-10 12:20:26]
jezzab :
Some bug? Coz people grabbed 2 versions of firmware from different modules and slapped them together and things don’t work? :thinking_face:
[2018-04-10 13:09:23]
jakub :
@jezzab totally legit, rr-right?
[2018-04-10 13:55:17]
cs2000 :
DJI Y U no make mixed modules work!?!?
[2018-04-10 13:55:38]
cs2000 :
If only they knew the stuff we would be doing at this point 12 months ago lol
[2018-04-10 17:44:54]
kdsisepic :
!wiki
[2018-04-10 21:41:53]
jezzab :
Bwhahaha I never knew my ex was on here. Toxic cow lol
[2018-04-10 23:13:46]
jcarlo :
Lol
[2018-04-11 13:26:15]
d.cernak :
hi pls, is there any way to disable FW upgrade on 4.1.22? removeFWUpgradeService patch is missing from this version, do I have to use goOffline?
[2018-04-11 13:32:24]
validat0r :
goOffline is always a good idea
[2018-04-11 13:33:53]
d.cernak :
It breaks flight log tho
[2018-04-11 13:34:21]
validat0r :
in what way?
[2018-04-11 13:34:55]
d.cernak :
I can't access my flight logs in app, map is empty etc
[2018-04-11 13:35:03]
d.cernak :
Should it work with goOffline too? Maybe the problem is elsewhere
[2018-04-11 13:35:24]
validat0r :
that would be an online service associated with your dji account, true?
[2018-04-11 13:35:42]
d.cernak :
not sure to be honest
[2018-04-11 13:38:46]
validat0r :
i dont use any online services, so i cant really help you there. only part of flight log i use is flight records off of my android device viewed by CsvView on my computer
[2018-04-11 13:45:26]
d.cernak :
These are working for me too, only "flight record" option in app is broken. No idea why it needs connection to work tho, seems like its stored locally
[2018-04-11 13:45:30]
d.cernak :
Thanks anyway
[2018-04-11 13:48:25]
validat0r :
have to check that on .22
[2018-04-11 18:54:46]
irischnpak :
!apk
[2018-04-11 19:00:29]
irischnpak :
I forgot if these were already modded... Anybody there can give me a hint?
[2018-04-11 21:12:07]
t3rm1 :
there arent modded
[2018-04-12 20:43:21]
irischnpak :
Who can recommend a store in Hong Kong selling Mavic spare parts at a good price? Friends of mine are there and crashed their bird...
[2018-04-13 16:10:33]
baj710 :
@baj710 uploaded a file: [image.png](https://dji-rev.slack.com/files/U99GY647R/FA7H407M5/image.png)
[2018-04-13 16:10:53]
baj710 :
@baj710 uploaded a file: [image.png](https://dji-rev.slack.com/files/U99GY647R/FA6CPDV8B/image.png)
[2018-04-13 16:11:23]
baj710 :
@baj710 uploaded a file: [image.png](https://dji-rev.slack.com/files/U99GY647R/FA7H4HTJT/image.png)
[2018-04-13 16:12:04]
baj710 :
@baj710 uploaded a file: [image.png](https://dji-rev.slack.com/files/U99GY647R/FA5V291CH/image.png)
[2018-04-14 10:22:52]
t3rm1 :
the custom firmware listed in dankdronedownloader go up to 1.4.100 for the mavic pro. why are 200 and 300 missing?
[2018-04-15 19:12:02]
pingspike :
Guys, when using deejayeye-modder on 4.1.22 and enabling the FCC patch I'm not able to click on the Flight Controller SN to bring up the box where I'd usually check for 'US' - is this a bug or by design?
[2018-04-15 19:12:30]
pingspike :
(I can bring it up when using 4.1.3 and NLD)
[2018-04-15 19:13:05]
mathieu.peyrega :
The box is not there anymore since a while but the patch is working
[2018-04-15 19:14:02]
mathieu.peyrega :
From modder readme :
App version >= 4.1.4
Starting from 4.1.4 the CC check dialog is gone and will not come back (still the fcc patch code is present and working)
[2018-04-15 19:14:27]
pingspike :
Hey @mathieu.peyrega ok, good to know thanks - but I am suspecting FCC is not actually being enabled - is there another way to check if it's actually in FCC?
[2018-04-15 19:14:55]
pingspike :
rooted Mavic Pro running .700
[2018-04-15 19:16:17]
mathieu.peyrega :
the is a log file somewhere on the /DJI directory
another way is to start an "unmodded" app (e.g. on another device). If you see the popup "WLAN country changed" (or kind of) asking you to revert to what WLAN settings should be, then you are in FCC (just pres cancel to saty in at this stage)
[2018-04-15 19:18:12]
pingspike :
so if I launch the unmodded app and I see that message, then I am in FCC, and if i do not see that message them I am probably back in CE?
[2018-04-15 19:19:56]
mathieu.peyrega :
the popup show up if your actuel settings are not the one the app think they should be
[2018-04-15 19:20:32]
pingspike :
Thanks @mathieu.peyrega I'll try this tonight :+1::skin-tone-2:
[2018-04-16 08:06:27]
cs2000 :
@t3rm1 read the release notes, its all in there mate :slightly_smiling_face:
[2018-04-16 17:38:18]
t3rm1 :
@cs2000 what release notes? i read those on the github page. couldn't find anything about the missing custom firmware
[2018-04-16 18:19:50]
cs2000 :
@t3rm1 appologies, i misread your question
[2018-04-16 18:20:11]
cs2000 :
They only go that far because i, or anybody else has made a custom version on that firmware level
[2018-04-16 18:20:22]
cs2000 :
The custom list is just made as/when people find a need for something
[2018-04-17 10:36:56]
acorchia :
on that subject (Can't help it FCC is really needed)
I've noticed the update message on retro regarding .DJI.Configs no longer work the latest apps on iOS
is there another way to activate FCC on MavicPro? would be so seriously helpful :pray:
[2018-04-17 13:16:35]
bin4ry :
yes there is but not shared yet stay calm or use an android to switch it to fcc and then keep clicking cancel
[2018-04-17 15:23:09]
cs2000 :
Best way (for now) is to downgrade your iOS application version
[2018-04-17 17:07:05]
d.cernak :
it really worked, thanks!
[2018-04-20 01:52:44]
jabuasab :
is there some issue with dankdronedownloader?
[2018-04-20 01:59:30]
nocommie :
Working for me.
[2018-04-20 02:24:06]
jabuasab :
Okay I'll try again. I was getting some server error
[2018-04-20 03:13:44]
christianwoodward :
//
[2018-04-20 08:54:58]
cs2000 :
All ok guys? @jabuasab it should all be working afaik
[2018-04-20 11:31:24]
glenn :
!apk
[2018-04-23 17:52:02]
t-swindell :
So I've tried patching several versions of the app. When I start the app and connect controller and power up mavic. It detects Phantom 4
[2018-04-23 17:52:07]
t-swindell :
Any idea what's up?
[2018-04-24 02:48:15]
jabuasab :
Anyone understand how the gps works on the drones? It does gps and glonass. Does it do both at the same time? Does it use both all the time to get a better accuracy?
[2018-04-24 03:13:32]
lolo780 :
Both yes
[2018-04-24 03:45:34]
mail836 :
Did you ever learn the answer to this? I would like to know.
[2018-04-24 12:23:47]
acorchia :
@bin4ry @cs2000 Thank you both, sorry for the late reply - been a little sick (well physically that is :smile: , mentally - I have no cure :wink: )
unfortunately I don't have any Android device, so it's a no go for me :confused: I'll be on the lookout for some solution for the IOS side
Downgrading sounds like an annoyance, if i'll reach a break point I might get tempted to go that far
Thanks again and hope to hear good news soon :slightly_smiling_face:
[2018-04-24 12:59:38]
h :
how to update mavic RC to a specific (say 1.3.700) firmware? i cant use dumldore (it crashes) or pyduml (stacktraces), i only got ruby duml tool to work for updating AC, but no idea what tool to use to get my RC from 1.3.600 to 1.3.700- any advice?
[2018-04-24 13:00:21]
cs2000 :
got any DUMLdore logs you can share?
[2018-04-24 13:00:59]
cs2000 :
Plus, you dont **have** to up/downgrade your RC
[2018-04-24 13:01:11]
cs2000 :
theres no good or bad effects/reason for doing so
[2018-04-24 13:02:10]
h :
hmm okay, so running a mavic with 1.4.300 and fc of 1.3.700 and no 905 with a RC running 1.3.600 is no issue?
[2018-04-24 13:03:11]
h :
at least right now i dont have any logs, cant remember if any log was created at the time of crash, windows just blared a "DUMLdore stopped working" at me while it stated "connecting"
[2018-04-24 13:03:50]
h :
or whatever that small spash screen exactly said after you connect your drone / whatever
[2018-04-24 13:04:26]
cs2000 :
Yep, no issues at all.
[2018-04-24 13:04:38]
h :
alright, then ill just leave it like that for now
[2018-04-24 13:04:40]
cs2000 :
no need to maintain firmware parity between the RC and AC :slightly_smiling_face:
[2018-04-24 13:06:23]
h :
anyone knows what that means: <http://dji.polybotes.feralhosting.com/big.png>
[2018-04-24 13:06:24]
h :
XD
[2018-04-24 13:07:11]
h :
apache timestamp tells me it was dropped onto the sever today
[2018-04-24 13:08:03]
h :
thanks
[2018-04-24 13:12:25]
acorchia :
maybe by 'big' they mean the entire database of everyone's naked photoshots.. :thinking_face:
[2018-04-24 13:12:51]
h :
eww XD
[2018-04-24 13:16:14]
jezzab :
what version of DUMLdore were you running?
[2018-04-24 13:16:22]
h :
3.0
[2018-04-24 13:16:27]
jezzab :
And what OS vers?
[2018-04-24 13:16:32]
h :
win10 x64
[2018-04-24 13:16:39]
h :
latest and greatest
[2018-04-24 13:16:51]
jezzab :
And at what point does it crash?
[2018-04-24 13:17:15]
h :
it started at first up until the guy without me having any drone or other thing attached
[2018-04-24 13:17:31]
h :
then i installed dji assistant 1.1.3 i think :thinking_face:
[2018-04-24 13:17:34]
h :
for drivers
[2018-04-24 13:17:39]
h :
attached the drone
[2018-04-24 13:17:46]
h :
and started dumldore again
[2018-04-24 13:18:19]
h :
it showed me that small splash screen informing me about it scanning / searching for the drone or something like that, i cant recall the exact working
[2018-04-24 13:18:38]
h :
and at that point windows reported me that it stopped working and needs to be closed
[2018-04-24 13:18:47]
jezzab :
hmm
[2018-04-24 13:18:59]
jezzab :
kinda points to a comport problem :confused:
[2018-04-24 13:19:03]
h :
i can check on the windows eventlogs later on when i am back home
[2018-04-24 13:19:16]
h :
dont have access to that machine right now since i am in the office
[2018-04-24 13:19:17]
jezzab :
which is strange on win x64 10
[2018-04-24 13:19:33]
jezzab :
which should be very very stable
[2018-04-24 13:19:39]
h :
i got my updating done using the ruby duml thing on linux
[2018-04-24 13:19:53]
jezzab :
there was just one device attched right?
[2018-04-24 13:19:58]
jezzab :
not 2 at the same time
[2018-04-24 13:19:59]
h :
so its not important to me, but i can certainly help pinpoint the issue to fix it for others in the futzure
[2018-04-24 13:20:06]
h :
yeah, just the drone
[2018-04-24 13:20:38]
jezzab :
on starting DDv3 it just talks over the serial port
[2018-04-24 13:21:21]
h :
i tried it several times, rebooting the drone aswell, diffrent usb ports, the standard stuff y/k
[2018-04-24 13:21:24]
jezzab :
no if the network RDNIS was screwed which happens it should do that. that would cause a handled exception later
[2018-04-24 13:21:51]
h :
worked fine using dji assistand
[2018-04-24 13:22:09]
h :
that one detected the drone fine, i was also able to change some parameters
[2018-04-24 13:22:16]
jezzab :
if you can grab the exception that would be great. then i can back track it. weird one
[2018-04-24 13:22:34]
h :
i have a look later and get back to you in about 4-5 hours i think
[2018-04-24 13:22:44]
jezzab :
no dramas. thanks
[2018-04-24 13:22:51]
h :
sure, no biggie ^1^
[2018-04-24 13:23:02]
cs2000 :
lol @h poking around on my server are we :wink:
[2018-04-24 13:23:23]
jezzab :
*these are not the drones your looking for*
[2018-04-24 13:23:35]
h :
well, if there is a autoindex everywhere i tend to look around all over the dir's to see what else of interest is there^^
[2018-04-24 13:23:44]
cs2000 :
why not, i do the same haha
[2018-04-24 13:23:54]
h :
if i wherent curious i wouldnt be here after all XD
[2018-04-24 13:24:03]
h :
or rooted my drone the day that i got it
[2018-04-24 13:24:27]
cs2000 :
haha, its something i whipped up quickly for the NoLimitDronez blog post i wrote, thats all i can say :zipper_mouth_face:
[2018-04-24 13:24:36]
h :
aight XD
[2018-04-24 13:24:41]
cs2000 :
was the only place i could think to host the image lol (dont have FTP access to NLD)
[2018-04-24 13:25:10]
h :
damn, i was thinking something like BAM opensource replacement firmware and app XD
[2018-04-24 13:25:18]
h :
you know, BIG big!
[2018-04-24 13:28:51]
jabuasab :
How do i unfuck a bad firmware push?
[2018-04-24 13:29:19]
jezzab :
wanna define what you did and what made it 'bad'?
[2018-04-24 13:29:27]
jezzab :
and what its now doing
[2018-04-24 13:29:35]
jezzab :
and what aircraft or remote control
[2018-04-24 13:29:37]
jezzab :
or goggles
[2018-04-24 13:30:34]
jabuasab :
Not sure I use dumbdore to push fw to a p4p and now when it boots the back leds just cycle colors as well as the little led by the sd card
[2018-04-24 13:31:05]
jezzab :
wow that really narrowed it down
[2018-04-24 13:31:10]
jezzab :
what firmware was it on
[2018-04-24 13:31:17]
jezzab :
what firmware did you go to
[2018-04-24 13:31:29]
jezzab :
was it a stock untouched firmware you flashed in
[2018-04-24 13:31:34]
jezzab :
where did you get it
[2018-04-24 13:32:28]
jabuasab :
Yeah it was stock. Went to .500. I'll have too think about what fw it was on
[2018-04-24 13:32:43]
jezzab :
can you talk to it?
[2018-04-24 13:32:49]
jezzab :
does assistant 2 see it?
[2018-04-24 13:32:54]
jabuasab :
Yeah
[2018-04-24 13:32:56]
jezzab :
does dumlore see it?
[2018-04-24 13:33:01]
jezzab :
does it have a com port?
[2018-04-24 13:33:05]
jabuasab :
Yes
[2018-04-24 13:33:19]
jezzab :
did you attempt to flash it again with the same firmware?
[2018-04-24 13:33:26]
jabuasab :
I can push the fw again but does the same
[2018-04-24 13:33:42]
jezzab :
does it complete? ie Upgrade Complete
[2018-04-24 13:33:47]
jabuasab :
Yes
[2018-04-24 13:34:27]
jabuasab :
Dd sends the fw but it doesn't look like the quad is updating
[2018-04-24 13:34:53]
jabuasab :
It never reboots
[2018-04-24 13:34:53]
jezzab :
So DDv3 is showing .500 now?
[2018-04-24 13:35:55]
jabuasab :
I'll have to look when I get home. I think so though
[2018-04-24 13:36:06]
jezzab :
Then its flashed
[2018-04-24 13:36:27]
jabuasab :
Hmmm
[2018-04-24 13:36:28]
jezzab :
Perhaps try going up one firmware and then back down again
[2018-04-24 13:36:37]
jabuasab :
Good idea
[2018-04-24 13:37:24]
jabuasab :
I'll try that and maybe bug you later. I was about to smash it
[2018-04-24 13:38:01]
jezzab :
DD doesnt actually do the upgrading on the AC. The AC does it itself. DD just put the file on there and says 'Go!' so to speak
[2018-04-24 13:38:37]
jabuasab :
I figured but the ac is not going anywhere lol
[2018-04-24 13:39:03]
jezzab :
Yeah ive have the same with Asst2. Just try going up and back or so
[2018-04-24 13:39:12]
jabuasab :
Cool
[2018-04-24 13:39:14]
jezzab :
Get it back in its groove
[2018-04-24 13:39:48]
jabuasab :
Thanks
[2018-04-24 13:40:03]
jezzab :
Tell me how you go
[2018-04-24 13:46:38]
jabuasab :
Will do
[2018-04-24 22:30:09]
jabuasab :
@jezzab got it working. Downgraded then upgraded fw seemed to fix it. Thanks
[2018-04-25 08:24:19]
irischnpak :
If my memory serves me correct there's no firmware mixing or root for Inspire 2 available? Correct?
[2018-04-25 09:36:11]
lolo780 :
Jcase rooted an i2 for me
[2018-04-25 09:36:25]
lolo780 :
Via teamviewer
[2018-04-25 09:37:34]
lolo780 :
I deleted the NFZ database off it and poked around. Dumped the system for later analysis.
[2018-04-25 09:38:47]
lolo780 :
But to answer your question, there's no publicly available root for the i2. Firmware mixing should work, although I didn't try.
[2018-04-25 09:57:00]
h :
Sry forgot to check the error yesterday
[2018-04-25 10:16:45]
h :
any idea why my RC occasionally shows NFZ Warning even after i deleted the NFZ DB's from my mavic
[2018-04-25 10:37:05]
trollspeed :
Well i thought that showing nfz on rc and feeling it on ac are different resources? Am i right?
[2018-04-25 10:37:23]
h :
i cant takeoff at all if that is shown
[2018-04-25 10:37:38]
h :
ive just found a nfz.db in /data/nfz/ on the AC
[2018-04-25 10:37:52]
h :
wm220_dz_ap0002_v1:/data/nfz # ls
cur_nfz.log
nfz.db
nfz.sig
[2018-04-25 10:38:00]
h :
that wasnt mentioned anywhere
[2018-04-25 10:38:18]
h :
@h uploaded a file: [Untitled](https://dji-rev.slack.com/files/UAAD8DYTS/FACUDVADB/-.txt)
[2018-04-25 10:38:44]
h :
/amt/nfz is gone as advised
[2018-04-25 10:45:54]
jabuasab :
@h is there a how-to on removing the nfz db?
[2018-04-25 10:46:13]
czokie :
Just published some NFZ stuff a moment ago in wiki
[2018-04-25 10:46:13]
czokie :
<https://dji.retroroms.info/howto/nfzbypass>
[2018-04-25 10:46:40]
h :
what a coincidence :open_mouth:
[2018-04-25 10:46:42]
czokie :
Broad NFZ related stuff that has been around elsewhere. I encourage others to update it.
[2018-04-25 10:47:03]
cs2000 :
haha its a helpful little wiki page :wink: if not a little fragmented at the moment :slightly_smiling_face:
[2018-04-25 10:47:20]
czokie :
Yeah - it needs some work.
[2018-04-25 10:47:31]
czokie :
I pulled it together from a doc someone else created....
[2018-04-25 10:47:53]
h :
hmkay, that mostly talks about android app side of things
[2018-04-25 10:48:14]
czokie :
Ya. There is other research that others are working on - that is likely to be added now that the info is public.
[2018-04-25 10:48:17]
h :
i get NFZ Limit shown on RC without smartphone connected on drone connect aswell
[2018-04-25 10:48:43]
h :
what i've read was that after rooting the mavic, one should delete /amt/nfz and be good
[2018-04-25 10:48:55]
czokie :
Background: I asked a question the other day in a private channel - which roughly said "If we assume any bad actors can downgrade firmware, and then do NFZ flying using NLD - what is the benefit to keeping NFZ research private?"
[2018-04-25 10:49:19]
h :
jeah, well ive had my drone on 1.3.600
[2018-04-25 10:49:20]
czokie :
Everyone agreed it was time to share - and possibly in the future - it might be in NLD or similar... time will tell.
[2018-04-25 10:49:38]
h :
upgraded to 1.3.700, rooted, deleted the amt/nfz folder, the 905 backup aswell
[2018-04-25 10:49:42]
jezzab :
Slow down turbo. What flight controller firmware and what main android firmware are you on? By the header on your shell you have a Mavic Pro
[2018-04-25 10:49:48]
jezzab :
Beat me to it
[2018-04-25 10:49:53]
h :
and updated to 1.4.300 sparing the 905 and the FC modukles
[2018-04-25 10:50:14]
h :
so FC is on 1.3.700
[2018-04-25 10:50:23]
h :
all other components are up2date on 1.4.300
[2018-04-25 10:50:37]
h :
no 905 module and no /amt/nfz folder
[2018-04-25 10:50:38]
jezzab :
What app?
[2018-04-25 10:50:47]
h :
but i found a data/nfz folder
[2018-04-25 10:50:51]
h :
(no app)
[2018-04-25 10:51:01]
h :
the NFZ Limit showed without a connected phone
[2018-04-25 10:51:16]
jezzab :
So you haven’t ever had the app connected since u did This?
[2018-04-25 10:51:18]
h :
if app then a patched .22
[2018-04-25 10:52:07]
h :
@h uploaded a file: [Screenshot_Nova_Launcher_20180425-125141.png](https://dji-rev.slack.com/files/UAAD8DYTS/FAC8H3N9X/screenshot_nova_launcher_20180425-125141.png)
[2018-04-25 10:53:39]
h :
it is not happening always
[2018-04-25 10:53:44]
h :
feels a bit random tbh
[2018-04-25 10:55:23]
jezzab :
Your the singularity, “The One”. DUMLdore crashes for u on startup and deleting the nfz stuff doesn’t work for you
[2018-04-25 10:56:30]
h :
i always tend to break stuff that works fine for others, should've gone for a QA career and not an it engineering one :joy:
[2018-04-25 10:57:21]
h :
any info on /data/nfz/ files around?
[2018-04-25 10:57:55]
jezzab :
I’ve not seen that before. Thing is it’s not reporting any version to the app
[2018-04-25 10:58:10]
h :
file nfz.db
nfz.db: SQLite 3.x database, last written using SQLite version 3008002
[2018-04-25 10:58:17]
h :
thats the nfz.db in /data/nfz/
[2018-04-25 10:58:33]
jezzab :
Yes the same as amt/nfz
[2018-04-25 10:58:47]
jezzab :
It’s and sql db and signature file for verification
[2018-04-25 10:59:33]
jezzab :
It’s not a symlink?
[2018-04-25 10:59:47]
jezzab :
That dir
[2018-04-25 11:00:07]
h :
@h uploaded a file: [Untitled](https://dji-rev.slack.com/files/UAAD8DYTS/FACMPT1EX/-.txt)
[2018-04-25 11:00:19]
h :
drwx------ root root 1980-01-01 00:29 nfz
[2018-04-25 11:00:20]
h :
nope
[2018-04-25 11:00:38]
jezzab :
As I said it’s the same as amt nfz
[2018-04-25 11:01:35]
h :
the log just stated errors in finding the amt/nfz files as expected
[2018-04-25 11:01:42]
h :
@h uploaded a file: [Untitled](https://dji-rev.slack.com/files/UAAD8DYTS/FADS3MZTR/-.txt)
[2018-04-25 11:02:13]
jezzab :
And if you delete it?
[2018-04-25 11:02:30]
h :
ill back it up and then remove it and see if that changes anything
[2018-04-25 11:02:43]
jezzab :
Do the motors arm (regardless of being in a nfz)
[2018-04-25 11:02:53]
h :
yep
[2018-04-25 11:03:00]
h :
erm
[2018-04-25 11:03:03]
jezzab :
As a 100+ pure fw, if u delete it, it won’t even arm at all ever
[2018-04-25 11:03:04]
h :
actually
[2018-04-25 11:03:13]
h :
i didnt take a close note to it
[2018-04-25 11:03:19]
jezzab :
Lol
[2018-04-25 11:03:23]
jezzab :
Rush rush rush lol
[2018-04-25 11:03:29]
h :
sry
[2018-04-25 11:03:32]
h :
;D
[2018-04-25 11:04:58]
h :
@h uploaded a file: [Untitled](https://dji-rev.slack.com/files/UAAD8DYTS/FADMM2Y3Y/-.txt)
[2018-04-25 11:05:05]
h :
deleted, gonna reboot and check
[2018-04-25 11:07:07]
h :
in motor arming you mean statup sequence or you mean what happens if i pull the thumbsticks of the FC to the bottom inward position?
[2018-04-25 11:07:20]
h :
if the latter, then no, they wouldnt arm before
[2018-04-25 11:07:28]
jezzab :
Bottom in
[2018-04-25 11:07:45]
jezzab :
Ie start the motors
[2018-04-25 11:08:04]
h :
alright, no they wouldnt spin up before i removed /data/nfz
[2018-04-25 11:09:00]
jezzab :
Put the files back and test again
[2018-04-25 11:09:56]
jezzab :
U do have gps signal right?
[2018-04-25 11:10:31]
jezzab :
Enough sats to “fly”
[2018-04-25 11:16:17]
h :
<https://picload.org/view/doragora/nfz_fc.png.html>
[2018-04-25 11:16:32]
h :
<https://picload.org/view/doragorl/nfz_app.png.html>
[2018-04-25 11:18:49]
jezzab :
Ur in atti mode not gps
[2018-04-25 11:18:56]
jezzab :
How would it stop u lol
[2018-04-25 11:19:03]
h :
i have no idea \o/
[2018-04-25 11:19:06]
jezzab :
Or even know
[2018-04-25 11:19:11]
jezzab :
Get more sats
[2018-04-25 11:19:54]
h :
it shouldnt even care in atti right?
[2018-04-25 11:20:24]
cs2000 :
it would still care about NFZ zones
[2018-04-25 11:21:08]
jabuasab :
Looks like I have missed a lot since I've been out of the scene. How did you root the mavic? Also, I read something about the mavic/spark being locked. How does that occur and what does it entail?
[2018-04-25 11:21:25]
h :
DUMLracer root's it
[2018-04-25 11:21:49]
h :
and then you can use your standard Android adb shell to access a root shell on the mavic
[2018-04-25 11:22:18]
jezzab :
It’s not in Beginner Mode is it?
[2018-04-25 11:22:22]
h :
no
[2018-04-25 11:22:27]
h :
normal mode
[2018-04-25 11:22:43]
h :
never even used beginner mode
[2018-04-25 11:23:14]
jezzab :
It’s on by default
[2018-04-25 11:23:46]
h :
its a used drone from a mate, beginner mode is "off" in app
[2018-04-25 11:24:30]
jezzab :
Cool it’s not like all the settings reset when u flash.. oh wait :thinking_face:
[2018-04-25 11:24:40]
jezzab :
I’ll leave u too it
[2018-04-25 11:25:06]
h :
ive flown about 60m off the ground after i flashed
[2018-04-25 11:25:23]
h :
i guess beginner mode would have limited that to 30 meters if i understood correctly
[2018-04-25 11:25:49]
jezzab :
Well i would suggest you start from the very beginning mate
[2018-04-25 11:25:59]
jezzab :
Your not breaking new ground here
[2018-04-25 11:26:22]
h :
thats my last resort plan yeah ^^
[2018-04-25 11:27:25]
jezzab :
Good coz It sounds like you fucked something up along the way.
[2018-04-25 11:27:52]
h :
im quite curious what i might have fucked up
[2018-04-25 11:28:07]
h :
since it didn't seem like rocketscience at all
[2018-04-25 11:28:17]
jezzab :
¯\_(ツ)_/¯
[2018-04-25 11:28:29]
h :
just dronescience XD
[2018-04-25 11:30:36]
h :
i mean,
1. update to 1.3.700
2. DUMLRace it to root
3. rm nfz stuff from drone
4. rm 905 and the two FC modules from 1.4.300
5. Flash modified 1.4.300
6. Patch APK
7. Profit
[2018-04-25 11:30:50]
h :
there is not much that can be fucked up there imho
[2018-04-25 11:30:57]
h :
**slightly confused**
[2018-04-25 11:31:41]
jezzab :
Well why doesn’t it work then rocket man?
[2018-04-25 11:32:00]
jezzab :
Proofs in the pudding
[2018-04-25 11:32:13]
h :
thats what im curious about:shrug:
[2018-04-25 11:32:15]
jezzab :
Or maybe they made one Mavic just for you so it wouldn’t work
[2018-04-25 11:32:24]
h :
i doubt that XD
[2018-04-25 11:32:29]
jezzab :
Me too
[2018-04-25 11:32:34]
jezzab :
Start again
[2018-04-25 11:32:43]
jezzab :
Get it clean and happy. Work ur way
[2018-04-25 11:33:30]
jabuasab :
Are you just rooting to remove the nfz stuff
[2018-04-25 11:34:03]
h :
i did root in the first place to do that yeah
[2018-04-25 11:34:30]
h :
and out of curiosity to see how the root fs is layd out and what bits and pieces are on the drone itself
[2018-04-25 11:34:41]
jabuasab :
Okay because I've been able to downgrade/upgrade without it
[2018-04-25 11:35:00]
jabuasab :
Just curious
[2018-04-25 11:35:14]
h :
sure, just spare the 905 module from the "to-be-flashed" firmware right?
[2018-04-25 11:35:36]
h :
but what about when the drone had a NFZ on it before flashing anything?
[2018-04-25 11:36:09]
jabuasab :
I see
[2018-04-25 11:36:36]
jabuasab :
It's still there even if you rollback
[2018-04-25 11:37:45]
h :
so if there was a NFZ on the drone in the beginning you would need root to get rid of it initially right? but i could remove root and just spare the 905 module from every to be flashed firmware image and be fine
[2018-04-25 11:38:02]
h :
as far as i understood the process so far
[2018-04-25 12:33:44]
h :
quick headup on 3.0 and 3.0.1 of dumldore crashing @jezzab
[2018-04-25 12:33:50]
h :
@h uploaded a file: [Untitled](https://dji-rev.slack.com/files/UAAD8DYTS/FADTG56F9/-.txt)
[2018-04-25 12:34:08]
h :
stacktrace of 3.0.1 (btw version 2 works fine just tested
[2018-04-25 18:44:06]
ben_lin :
Yes
[2018-04-27 10:04:59]
930175620 :
could anybody give me Go4.1.9-1025608 and its 150mb not 95mb
[2018-04-27 15:09:10]
pingspike :
anyone know the transmitter power differences (in watts) from CE mode vs FCC mode on a Mavic Pro setup?
[2018-04-27 16:22:58]
g1dtf :
my 4.1.9-1025608 is 97mb
[2018-04-28 02:50:59]
930175620 :
could someone help make Go4.1.9 for P3 series （P3A），and force FCC
[2018-04-28 02:51:16]
930175620 :
i do myself but cant connect
[2018-04-28 03:02:03]
nocommie :
Dude, stop spamming in all channels! That is a good way to get ignored and banned
[2018-04-28 03:02:13]
jezzab :
Too late
[2018-04-28 03:02:21]
jezzab :
I warned him and hes posted in 4 Channels at once
[2018-04-28 03:02:21]
nocommie :
lol
[2018-04-28 03:02:24]
jezzab :
Good bye
[2018-04-28 03:02:28]
nocommie :
bahahaha
[2018-04-28 10:29:44]
cs2000 :
Thanks god for that. Thanks Jezzab, he was damn annoying and you have already warned him!
[2018-04-28 10:43:23]
t3rm1 :
can anyone tell me if it is better to charge an empty mavic pro battery to 50% or to 100% (and have it discharge automatically to 50%)
[2018-04-28 10:43:51]
t3rm1 :
is there a difference at all?
[2018-04-28 13:45:35]
lukasforssen :
!apk
[2018-04-28 14:27:50]
lolo780 :
Charge to half
[2018-04-30 15:56:41]
pingspike :
I have a modded GO4 app (4.1.22) with the option to restore offline maps enabled - but I'm only seeing map download options for China regions, nothing in Europe, is this right? any fixes??
[2018-04-30 16:06:08]
blak :
move to china
[2018-04-30 16:06:10]
blak :
:slightly_smiling_face:
[2018-04-30 18:39:13]
pingspike :
Yeah it's cloned @mathieu.peyrega (for CS), using fake login, then wifi enabled to try and download the offline maps, but only China regions are in the list of offline maps, nothing outside China at all
[2018-04-30 18:50:20]
mathieu.peyrega :
did you cloned for CS yourself or used a special CS version ? If you cloned yourself, you probably broke that capability : <https://github.com/Bin4ry/deejayeye-modder/issues/165#issuecomment-382970727>
You can do a clone for CS with valid Here Map key, you need to find a valid Here Map key and a valid package name for that key
[2018-04-30 19:29:44]
t3rm1 :
whats better about heremaps?
[2018-04-30 20:03:56]
pingspike :
I've no idea mate... I don't personally like it, I prefer Google Maps - mainly because on satellite Here Maps my entire region is under clouds?!
[2018-05-01 06:12:52]
bin4ry :
we should add a bigger warning somewhere people asking this question over and over again. also we need to adds bigger warning that cloning next to an official app is extremely risky and causes the original app to be able to send your data to dji due to the share folder
[2018-05-01 09:02:52]
t3rm1 :
yes please, be more noob friendly :slightly_smiling_face: i have been around for 1 month now, read everything and still dont know shit
[2018-05-01 09:03:16]
cs2000 :
:joy: theres 18 months of reading to be done
[2018-05-01 09:03:30]
t3rm1 :
lol
[2018-05-01 12:58:50]
rudyemay2000 :
Is it possible to remove NFZ to iOS app?
[2018-05-01 13:48:18]
cs2000 :
!wiki
[2018-05-01 18:07:33]
quad808 :
Can someone tell me what a "device" is?
[2018-05-01 18:08:18]
quad808 :
Is my mic on? Hello? Can you guys hear me?
[2018-05-03 19:48:06]
kool.stout12 :
Or where is the ANY KEY?
[2018-05-04 07:32:20]
jackjay :
I've been trying to run the DJI Go app on a andriod emulator but i cant seem to get it working. I've got the app running on RemixOS but i can't get the usb connection with the RC working. Has anyone tried this or do you have any adivce for getting DJI go app on pc working?
[2018-05-05 19:03:51]
erwin :
hi, if I try to downgrade my MP and it does not have the internal SD, will I get an error and be able to return to the latest firmware? or will I need to install the SD?
[2018-05-05 23:10:12]
jezzab :
Will get an error and can flash it back to a later firmware
[2018-05-05 23:46:24]
erwin :
ok I see, i got, error 202 :stuck_out_tongue:
[2018-05-06 00:43:27]
erwin :
MP from November 2017 (after my feb 2017 one fell into the sea)
[2018-05-07 04:52:59]
rabdouhl :
Howdy, after following the NFZ tutorial ( <http://dji.retroroms.info/howto/nfzbypass> ) and building a patched apk with NFZ patch ( <https://github.com/Bin4ry/deejayeye-modder> ), the NFZ restrictions are still active.
[2018-05-07 04:53:19]
rabdouhl :
Is there another step?
[2018-05-07 04:54:36]
rabdouhl :
I'm curious if I need to also patch the remote controller's firmware
[2018-05-07 04:54:47]
rabdouhl :
Did receive a message about something being mismatched
[2018-05-07 04:54:50]
rabdouhl :
hardware
[2018-05-07 05:28:56]
bin4ry :
did you follow the tut by every word?
[2018-05-07 05:39:02]
bin4ry :
hm reading the tut now, @quad808 this part seems as it could be understood wrong: „2. You will see Completed. Exit DUMLdore and restart device. Then it will change to Flashing complete. Device may be powered off. Exit DUMLdore restart the Mavic and you are DONE. „. i never used the racer in dumldore so could this be a issue of dumldore not completing the race and ppl rebooting too early maybe?
[2018-05-07 06:17:08]
jezzab :
See if that makes more sense @bin4ry. I've just edited it.
[2018-05-07 06:39:28]
rabdouhl :
@bin4ry Yes I did
[2018-05-07 06:40:28]
rabdouhl :
I only shut down the device once DUMLdor was totally finished doing it's thing, after completing stage2.bin install.
[2018-05-07 07:45:19]
yihuasteven :
@rabdouhl check your NFZ db version, if it is ended with 09. According to my experience, the stage2.bin installation will not be completed successfully with a .09 version nfz db on your ac. It ends with the status "Rollback defeat stage complete" or sometimes "Completed. Exit DUMLdore and restart device" You will have to remove the nfz db on your ac and re-flash a stock firm in order to downgrade the db version to .07 to solve it.
[2018-05-07 07:50:54]
jezzab :
There is actually no version check in the patch @yihuasteven its just copying the files for you instead of you having to do it by hand
[2018-05-07 07:51:55]
jezzab :
It will delete what ever nfz.db file is there and copy the blank one in its place
[2018-05-07 07:52:03]
yihuasteven :
exactly when i had a .09 version db on my ac, it failed. With a .07 db, just succeeded.
[2018-05-07 07:52:16]
yihuasteven :
that's just my experience.
[2018-05-07 07:52:22]
jezzab :
It's not part of the normal process it is a script on reboot that's run
[2018-05-07 07:53:50]
jezzab :
Same as DUMLracer and root
[2018-05-07 07:55:32]
yihuasteven :
i dont know why... but really, I had tried a lot last week, and finally got it solved in this way, just hope it can help
[2018-05-07 07:58:57]
yihuasteven :
when i had a .09 db, no matter how much times I used dumldore to do stage2.bin installation, it allways kept .09 db. with .07 db, it succeeded for the first time
[2018-05-07 12:05:22]
paulpaws :
Hi all, @jezzab and @quad808. That’s what I was trying to say a while ago. The instructions didn’t make sense. After its done you will see “Completed. **Exit DUMLdore** and restart device” it will then quickly change to “*Flashing complete. Device may be powered off*”.
[2018-05-07 12:11:38]
paulpaws :
I don’t see how you can see “flashing complete” when you been instructed to **Exit** DUMLdore. I’m I missing something?
[2018-05-07 12:23:25]
jezzab :
It was a midnight hack to add in the support
[2018-05-07 12:23:32]
jezzab :
if thats a problem then dont use it. (Love whinging c*nts that complain about free shit)
[2018-05-07 12:23:52]
jezzab :
` it will then quickly change to `
[2018-05-07 12:23:57]
jezzab :
see that bit?
[2018-05-07 12:24:46]
jezzab :
Pay for NLD when its implemented if its a problem because this is all it will ever be in DUMLdore. It was meant to be a drop and run and someone else can deal with it and write a tutorial or what ever as I wont sit and support how to install it. Then i even made a simple patch0matic file the stage2.bin with the same caveat. I offered to do a quick mod to V3 to make it easier and more successful (without having to completely recode everything which was a PITA coz its already making a mess). If i do it again ill just let people get their own root and do it all by hand. Then we might sort the men from the boys and a simple message that may confuse will start lookin pretty damn good when you have 15 linux commands, adb push pulls and a risk of a typo from bricking it
</rant>
[2018-05-07 12:31:53]
t3rm1 :
does anyone know if the fake gps method to go into fcc mode still works for the mavic pro? i just tried it but i dont get the dialog saying it will change wifi settings. it seems that the AC or the remote determine the location.
[2018-05-07 12:32:52]
jezzab :
Mod the app. Dont need to run some fake GPS
[2018-05-07 12:33:07]
t3rm1 :
im on holiday right now and cant mod the app
[2018-05-07 12:34:51]
t3rm1 :
so i verified the fake location on google maps. then powered on ac and remote and connected the phone to the remote.
[2018-05-07 12:35:39]
jezzab :
well the logs should show your faked location just like a patched app
[2018-05-07 12:36:18]
t3rm1 :
the map however showed the correct location :disappointed: maybe they patched it
[2018-05-07 12:36:54]
jackjay :
!apk
[2018-05-07 13:13:13]
t3rm1 :
hmm, all solution is have found seem to only apply for air or spark. looks like mavic pro doesnt work because the AC uses its gps to choose between fcc and ce.
[2018-05-07 13:16:36]
jezzab :
Did you actually check the app log files
[2018-05-07 13:17:15]
t3rm1 :
i didn't
[2018-05-07 13:17:37]
t3rm1 :
i only searched for a quick way to do it and remembered someone told me to use fake gps
[2018-05-07 13:17:39]
jezzab :
And I’ve never had my Mavic pop up with a wifi message
[2018-05-07 13:17:59]
jezzab :
Only my Spark and Mavic Air do it
[2018-05-07 13:18:24]
t3rm1 :
ye, seems like it
[2018-05-07 13:18:36]
jezzab :
...coz theyre wifi
[2018-05-07 13:18:37]
t3rm1 :
i ll take a look at the log if i find it :stuck_out_tongue:
[2018-05-07 13:24:12]
t3rm1 :
wtf logs are encoded?
[2018-05-07 13:24:34]
t3rm1 :
whats that? base64? tha makes it a lot harder to read on the phone
[2018-05-07 17:00:46]
quad808 :
@jezzab Much clearer in the edit. Thanks
[2018-05-07 19:19:46]
erwin :
@t3rm1 did you tried with the patched apps? I tried with FakeGPS too and never got the message too. The mavic appears on the last position I flew, and my remote in the FakeGPS position :stuck_out_tongue:
[2018-05-07 20:41:24]
rabdouhl :
@yihuasteven interesting, can anyone here point me to instructions on how to downgrade the NFZ db version?
[2018-05-07 20:45:51]
quad808 :
wiki!
[2018-05-07 20:46:26]
quad808 :
buhahahaha
[2018-05-07 20:48:39]
rabdouhl :
that's great
[2018-05-07 20:49:34]
rabdouhl :
<http://dji.retroroms.info/start?do=search&id=nfz+db>
[2018-05-07 20:49:40]
rabdouhl :
What am I missing? :smiley:
[2018-05-07 20:50:11]
rabdouhl :
If help me figure it then I can update the wiki instructions
[2018-05-07 20:50:23]
rabdouhl :
*if you
[2018-05-07 21:09:45]
quad808 :
<http://dji.retroroms.info/howto/nfzbypass>
[2018-05-07 21:12:50]
rabdouhl :
where do you see it in there?
[2018-05-07 21:13:29]
rabdouhl :
I don't see anything about downgrade
[2018-05-07 21:33:09]
quad808 :
What EXACTLY are you looking for
[2018-05-07 21:48:13]
nocommie :
Come on @quad808 you know, the thing that lets him do the stuff. Make his drone cool and stuff.
[2018-05-07 21:49:15]
quad808 :
LOL...cool beans! Anyone got a spoon?? :thinking_face:
[2018-05-07 21:50:44]
quad808 :
Spatula?
[2018-05-07 21:50:52]
quad808 :
Whisk?
[2018-05-07 21:51:47]
quad808 :
Hello...tap...tap..tap...Is this on? (crickets)
[2018-05-07 21:52:39]
jezzab :
*<wheeeeeeeeeeeeeeerewe>*
[2018-05-07 21:52:54]
jezzab :
Sheez careful with feedback on that thing
[2018-05-07 21:53:13]
jezzab :
Some of us are just waking up
[2018-05-07 21:53:23]
quad808 :
!beer
[2018-05-07 21:53:31]
quad808 :
thats for you
[2018-05-07 21:53:53]
jezzab :
!coffee
[2018-05-07 21:54:09]
quad808 :
It's time for a coffee!
[2018-05-07 21:54:37]
quad808 :
And how would you like that sir? Black, cream and sugar?
[2018-05-07 21:55:02]
jakub :
!beer
[2018-05-07 21:55:06]
jezzab :
Black, sugar, strong
[2018-05-07 21:55:17]
quad808 :
coming right up!
[2018-05-07 21:55:27]
jezzab :
Usually have two doubles in 30 mins. I call it the defibrillator. Can’t do 3 though or you start talking in tongues and can see sounds
[2018-05-07 21:55:41]
quad808 :
oh wait. I gave you a cup of tar. Sorry!
[2018-05-07 21:56:21]
quad808 :
I reacted to my own post. WATANOOB
[2018-05-07 21:57:03]
quad808 :
Its Monday, and it sucks to be at work. Just sayin'
[2018-05-07 21:57:35]
jakub :
!whisky
[2018-05-07 21:58:12]
jezzab :
Done my Monday it’s Tuesday morning here
[2018-05-07 21:58:20]
jakub :
@jakub uploaded a file: [Monday you say...](https://dji-rev.slack.com/files/U8TQ4SVF1/FAKHCQ23E/20180507_235746.jpg)
[2018-05-07 21:58:42]
jakub :
then I have even stronger will to open this bottle :wink:
[2018-05-07 21:59:02]
jezzab :
Lol
[2018-05-07 21:59:37]
jakub :
beer returned 404 for me so...
[2018-05-07 22:06:51]
rabdouhl :
I'm looking for instructions on how to downgrade the NFZ db version as per @yihuasteven’s instructions:
> Ivon [12:45 AM]
>
> @rabdouhl check your NFZ db version, if it is ended with 09. According to my experience,
> the stage2.bin installation will not be completed successfully with a .09 version nfz db on your
> ac. It ends with the status "Rollback defeat stage complete" or sometimes "Completed. Exit
> DUMLdore and restart device" You will have to remove the nfz db on your ac and re-flash a
> stock firm in order to downgrade the db version to .07 to solve it.
[2018-05-07 22:07:13]
rabdouhl :
cc @quad808
[2018-05-07 22:09:09]
quad808 :
Did you try following the guide to completely remove NFZ? Why downgrade when you can remove?
[2018-05-07 22:09:32]
rabdouhl :
yes, that is ultimately what I'm trying to do
[2018-05-07 22:09:40]
rabdouhl :
I followed the guide to the letter, NFZ is still active
[2018-05-07 22:09:45]
quad808 :
You have a Mavic, yes?
[2018-05-07 22:09:49]
rabdouhl :
correct
[2018-05-07 22:09:58]
quad808 :
you have the stage2.bin file?
[2018-05-07 22:10:03]
rabdouhl :
of course
[2018-05-07 22:10:13]
quad808 :
what firmware are you on?
[2018-05-07 22:10:40]
rabdouhl :
the AC is flashed to V01.04.0200_Mavic_dji_system.bin
[2018-05-07 22:11:29]
quad808 :
Ok, flash 01.04.0100, then flash back up to stock 01.04.0200, then follow the NFZ instructions again. Done. What GO are you using?
[2018-05-07 22:12:19]
quad808 :
Its easier for me to tell you to do the flashing, rather than manually
[2018-05-07 22:12:33]
rabdouhl :
The one linked in the NFZ tutorial, then I rebuilt it via <https://github.com/Bin4ry/deejayeye-modder> with the NFZ patches applied
[2018-05-07 22:13:10]
quad808 :
ok, so 4.1.22 with the NFZ patch, yes? Windows or Linux patched?
[2018-05-07 22:13:22]
rabdouhl :
correct, Windows.
[2018-05-07 22:13:31]
rabdouhl :
though I don't think I'll do that again
[2018-05-07 22:13:35]
quad808 :
When did you patch it?
[2018-05-07 22:13:40]
rabdouhl :
It was terrifying, DUMBLdore crashed 2x
[2018-05-07 22:13:51]
rabdouhl :
Will try on Mac or Linux next time.
[2018-05-07 22:13:54]
rabdouhl :
Yesterday.
[2018-05-07 22:14:38]
quad808 :
did you download Bin4ry's files yesterday too? There were changes to the Windows RunMe.bat file that was just done on Friday.
[2018-05-07 22:14:59]
rabdouhl :
yes, just cloned it yesterday
[2018-05-07 22:15:00]
quad808 :
Fixed the NFZ patching on Windows
[2018-05-07 22:15:08]
rabdouhl :
I'
[2018-05-07 22:15:23]
rabdouhl :
I'm curious - is any patching or flashing of the RC necessary?
[2018-05-07 22:15:28]
quad808 :
nope
[2018-05-07 22:15:36]
rabdouhl :
ok
[2018-05-07 22:15:39]
quad808 :
you can leave it on higher firmware, always...no issues
[2018-05-07 22:15:45]
rabdouhl :
got you.
[2018-05-07 22:16:10]
quad808 :
The reason you want to flash to stock 01.04.0100 is to reset everything, including the NFZ files
[2018-05-07 22:16:27]
rabdouhl :
Ah, I think I see..
[2018-05-07 22:16:34]
rabdouhl :
so flashing to .0200 isn't enough?
[2018-05-07 22:16:58]
quad808 :
Then go up to 01.04.0200 if you want, or just use DUMLdore and replace stage 2.bin to get rid of NFZ
[2018-05-07 22:17:37]
quad808 :
No way for me to be sure that the NFZ files get replaced. For sure they will get replaced by going either higher or lower in firmware. You want stock firmware.
[2018-05-07 22:18:02]
rabdouhl :
Ah, so it might not have worked because previously it got an update
[2018-05-07 22:18:09]
quad808 :
exactly
[2018-05-07 22:18:14]
rabdouhl :
then I flashed to .0200, but it didn't get replaced?
[2018-05-07 22:18:56]
quad808 :
If your NFZ file was updated the stage2.bin patch won't work correctly. Its for stock firmware.
[2018-05-07 22:19:42]
rabdouhl :
understood, thank you so much for bearing with me..
[2018-05-07 22:19:46]
rabdouhl :
incredibly kind of you.
[2018-05-07 22:20:22]
quad808 :
If your current NFZ.db file on the Mavic has been updated...hmmmmm....Not sure how to go about it. I am not sure if downgrading the firmware will help or overwrite it, since it's a newer file than the firmware...
[2018-05-07 22:20:42]
quad808 :
@jezzab any ideas?
[2018-05-07 22:21:09]
quad808 :
Can you ADB?
[2018-05-07 22:21:29]
rabdouhl :
The drone was made in Dec 17, I just got it in March, and have been using it with whatever dji forces in terms of update prompts
[2018-05-07 22:21:58]
rabdouhl :
What is to be done with adb
[2018-05-07 22:22:11]
jezzab :
What’s ur logic on it replacing the nfz.db @quad808 ?
[2018-05-07 22:23:31]
quad808 :
I was thinking that say...you upgrade to stock 01.04.0200, then you get the NFZ db update prompt, which upgrades nfz.db to a higher version than what is in stage2.bin. You then run stage2.bin...does it matter?
[2018-05-07 22:23:46]
jezzab :
Its like this:
[2018-05-07 22:24:00]
jezzab :
stage2.bin is basically the same as jcases root patch
[2018-05-07 22:24:12]
jezzab :
butive added in 2 more files as the payload and changed the script
[2018-05-07 22:24:24]
quad808 :
Or....you try downgrading to 01.04.0100 stock, and it will or will not downgrade the nfz.db file too?
[2018-05-07 22:24:28]
jezzab :
on the device rebooting the script is executed
[2018-05-07 22:25:16]
quad808 :
I think I am confusing myself...LOL
[2018-05-07 22:25:29]
jezzab :
this gets executed on reboot:
```#!/system/bin/sh
/system/bin/mount -o remount,rw /amt
/system/bin/mount -o remount,rw /system
/system/bin/sleep 1
/system/bin/cp /data/.bin/nfz.db /amt/nfz/nfz.db
/system/bin/rm /system/bin/dji_flight
/system/bin/cp /data/.bin/dji_flight /system/bin/dji_flight
/system/bin/chmod 755 /system/bin/dji_flight
/system/bin/chown root:shell /system/bin/dji_flight
/system/bin/sync
/system/bin/sleep 1
/system/bin/mount -o remount,ro /amt
/system/bin/mount -o remount,ro /system
/system/bin/rm /data/.bin/grep
/system/bin/rm /data/.bin/nfz.db
/system/bin/rm /data/.bin/dji_flight
/system/bin/reboot```
[2018-05-07 22:25:50]
jezzab :
thinking out loud here.
[2018-05-07 22:25:53]
quad808 :
yah, so no matter the nfz.db version, it gets axed
[2018-05-07 22:26:00]
jezzab :
i think it wouldnt hurt to have an rm in there
[2018-05-07 22:26:14]
jezzab :
between here and here
[2018-05-07 22:26:21]
jezzab :
```/system/bin/sleep 1
/system/bin/cp /data/.bin/nfz.db /amt/nfz/nfz.db```
[2018-05-07 22:27:06]
quad808 :
I hear heads exploding all over this forum :exploding_head::exploding_head::exploding_head:
[2018-05-07 22:27:10]
rabdouhl :
Alright, so then...this invalidates what Ivon was saying
[2018-05-07 22:27:34]
jezzab :
can someone quickly upload the `stage2.bin` here please
[2018-05-07 22:27:42]
jezzab :
ill add in an `rm`
[2018-05-07 22:27:47]
rabdouhl :
Any idea on what could be wrong after following the NFZ bypass tutorial but still getting NFZ'd?
[2018-05-07 22:27:49]
jezzab :
before the `cp`
[2018-05-07 22:28:02]
rabdouhl :
@rabdouhl uploaded a file: [stage2.bin](https://dji-rev.slack.com/files/UAK19MEAG/FALMA36TG/stage2.bin)
[2018-05-07 22:28:19]
rabdouhl :
> Your file was uploaded — it’s safe and sound in Slack. Unfortunately your workspace doesn’t have any storage space left. To get more space, you can upgrade to a paid account or delete some of your older files.
[2018-05-07 22:28:33]
rabdouhl :
not sure if it is available or not.
[2018-05-07 22:28:43]
quad808 :
error in Slack, all good
[2018-05-07 22:28:59]
rabdouhl :
@jezzab Why would `rm` make a difference if you're `cp`'ing?
[2018-05-07 22:29:17]
jezzab :
it SHOULD copy over the top
[2018-05-07 22:29:17]
rabdouhl :
maybe the script should have a `set -e` at the top?
[2018-05-07 22:29:20]
jezzab :
but just incase
[2018-05-07 22:29:40]
quad808 :
I like your thinking
[2018-05-07 22:30:02]
rabdouhl :
in all my years with *nix, have yet to see `rm` before `cp` ever be necessary, but it's true it will be unlikely to hurt.
[2018-05-07 22:30:05]
quad808 :
and my head didn't explode yet
[2018-05-07 22:30:15]
rabdouhl :
At the same time, not sure it will address this..
[2018-05-07 22:30:25]
jezzab :
I agree @rabdouhl.
[2018-05-07 22:30:33]
jezzab :
Thats why i didnt put it in when i wrote it
[2018-05-07 22:30:45]
jezzab :
but for "Shits and Giggles" lets give it a whirl
[2018-05-07 22:30:50]
rabdouhl :
hehe
[2018-05-07 22:31:21]
rabdouhl :
1 other question..
[2018-05-07 22:31:27]
jezzab :
@jezzab uploaded a file: [stage2-edit.bin](https://dji-rev.slack.com/files/U65113Z43/FAK3ZDU3A/stage2-edit.bin)
[2018-05-07 22:31:38]
rabdouhl :
let's say, worst case scenario, I somehow messed up the apk build
[2018-05-07 22:31:44]
rabdouhl :
is that step critical?
[2018-05-07 22:31:59]
jezzab :
But now you know why i was explaining to @yihuasteven yesterday why the db version wont have an effect. there is no check its just a script
[2018-05-07 22:32:03]
rabdouhl :
I'm just trying to figure out what parts are critical vs. nice to have
[2018-05-07 22:32:35]
rabdouhl :
oh, I'd missed that msg! cool.
[2018-05-07 22:32:46]
jezzab :
(he didnt believe me :P)
[2018-05-07 22:32:52]
quad808 :
and I was way off track in la la land
[2018-05-07 22:33:10]
quad808 :
(thinking of spatulas)
[2018-05-07 22:33:21]
jezzab :
i dont think the `rm` is going to do it though. the `cp` is run as root so it should just copy straight over the top
[2018-05-07 22:33:56]
rabdouhl :
so, dumbledore definitely said success, and reported the f/w version as .0200 afterwards
[2018-05-07 22:34:12]
rabdouhl :
then I applied stage2 and same result - success msg
[2018-05-07 22:34:21]
quad808 :
Fire it up Man!
[2018-05-07 22:34:21]
rabdouhl :
the apk build looked great
[2018-05-07 22:34:32]
rabdouhl :
what else could it be?
[2018-05-07 22:34:50]
quad808 :
oh wait. You didn't reflash with the edited .bin
[2018-05-07 22:35:02]
jezzab :
does the RC starts the motors without the app attached?
[2018-05-07 22:35:03]
rabdouhl :
that's "applying stage2"
[2018-05-07 22:35:16]
jezzab :
what DB version does the App show?
[2018-05-07 22:35:26]
rabdouhl :
in the NFZ? the LEDs all go red, and R/C says "NFZ"
[2018-05-07 22:35:38]
quad808 :
Can you arm?
[2018-05-07 22:35:40]
rabdouhl :
let me look
[2018-05-07 22:35:44]
rabdouhl :
what's arm?
[2018-05-07 22:35:48]
quad808 :
arm the motors
[2018-05-07 22:35:52]
quad808 :
IN nfz
[2018-05-07 22:36:00]
quad808 :
even if the lights are red
[2018-05-07 22:36:10]
jezzab :
arm = start
[2018-05-07 22:36:25]
quad808 :
leg=leg
[2018-05-07 22:36:43]
rabdouhl :
it denied me from taking off
[2018-05-07 22:36:44]
quad808 :
or, wait... leg=part of a trip
[2018-05-07 22:37:09]
quad808 :
and this was using the NFZ patched 4.1.22, correct?
[2018-05-07 22:37:44]
jezzab :
@rabdouhl you sound pretty cluey with linux
[2018-05-07 22:37:47]
rabdouhl :
yes
[2018-05-07 22:37:52]
jezzab :
just get root with DUMLracer
[2018-05-07 22:37:55]
jezzab :
and do it by hand
[2018-05-07 22:38:05]
jezzab :
you can even do .300 if you like that way
[2018-05-07 22:38:14]
rabdouhl :
I'm a fancy dev person
[2018-05-07 22:38:14]
quad808 :
one question....did you ever get a popup on GO that says update NFZ database or something like that, AFTER running stage2.bin?
[2018-05-07 22:38:24]
rabdouhl :
Just not familiar with the ins and outs of drone modding
[2018-05-07 22:38:27]
jezzab :
the `stage2.bin` is a `.tar.gz`
[2018-05-07 22:38:30]
jezzab :
sniff around inside
[2018-05-07 22:38:37]
rabdouhl :
ohrly, ok
[2018-05-07 22:38:47]
jezzab :
:slightly_smiling_face:
[2018-05-07 22:39:00]
jezzab :
You have seen what the script does im sure you can emulate it
[2018-05-07 22:39:03]
rabdouhl :
@quad808 Uhm, maybe but I don't think so
[2018-05-07 22:39:43]
quad808 :
that would f it up right there, and overwrite the nfz removed files, causing you to run it again
[2018-05-07 22:40:14]
jezzab :
You are effectively just replacing two files `dji_flight` and `nfz.db` with the ones in the archive
[2018-05-07 22:40:25]
jezzab :
make SURE you chmod the `dji_flight` as per the script
[2018-05-07 22:40:38]
quad808 :
unless, you had a good friend...who, when sent that new file....hollowed it out for you. :grin:
[2018-05-07 22:40:51]
jezzab :
yes if you allow a NFZ update from the app the real db (with geo data) will be re-instated
[2018-05-07 22:41:02]
rabdouhl :
quad- I never pressed "ok" to update or anything like that..
[2018-05-07 22:41:18]
rabdouhl :
and come to think of it, def. didn't see that after flashing yesterday.
[2018-05-07 22:41:31]
rabdouhl :
yes ofcoz it'd reinstall :slightly_smiling_face:
[2018-05-07 22:41:37]
jezzab :
do it by hand. will take you 5 minutes
[2018-05-07 22:42:38]
rabdouhl :
re: dumlracer: `System.out.println("GL - target GL");`
[2018-05-07 22:42:40]
rabdouhl :
what's a GL?
[2018-05-07 22:42:44]
quad808 :
yep. well...for some of us 5 minutes. For others, ahem, when jezzab is looking over your shoulder waiting for you to hurry the f up...might take a wee bit longer. :grinning:
[2018-05-07 22:43:10]
jezzab :
LOL
[2018-05-07 22:43:24]
jezzab :
I wanted to get back to watching "my stories"
[2018-05-07 22:43:41]
quad808 :
hahahahaha...I had serious brain freeze
[2018-05-07 22:44:05]
jezzab :
<deer> "Heeeeaaaaaaaaadliiiiiiiiiights!"
[2018-05-07 22:44:20]
quad808 :
:joy:
[2018-05-07 22:45:11]
quad808 :
@rabdouhl. You will get it done.
[2018-05-07 22:45:23]
rabdouhl :
one way or another..
[2018-05-07 22:45:27]
rabdouhl :
or brick my poor mavic
[2018-05-07 22:48:51]
jezzab :
No guts, no glory
[2018-05-07 22:50:53]
jezzab :
GL is usually Glass aka Goggles
[2018-05-07 22:55:38]
rabdouhl :
nice to know, thanks.
[2018-05-08 00:38:20]
yihuasteven :
@rabdouhlI saw .09 nfz db version in app and got nfz pop on both app and RC screen, unable to arm motors. Before I deleted it manually, flashing stock firms or running stage2.bin patch did not change it. Then i rooted my mavic ac with dumlracer, deleted the nfz files and nfz backup files with adb shell, flashed .100 stock firmware, saw .07 db version, ran stage2.bin patch, saw .08 db version, and got rid of nfz pops, of course, with a modded 4.1.22 app. That's all i have done. I appreciate @jezzab very much for your work and help, I appologize for the 'Not believing', sincereIy, I am noob so I could just guess what was stopping me from getting it done. If the db version does not matter, how about the high version backup files?
[2018-05-08 01:07:59]
nocommie :
Just to add, if you don't get it working, look in the "about" of your app and tell us what all the fly safe versions are.
[2018-05-08 04:57:16]
rabdouhl :
@nocommie Sorry if this is a dumb question - where is the "About" page in app?
[2018-05-08 04:59:48]
rabdouhl :
I do get an "Inconsistent Firmware Found" msg
[2018-05-08 05:00:01]
rabdouhl :
"A/C F/W and peripheral F/W do not match"
[2018-05-08 05:00:54]
rabdouhl :
Ok, found the About page
[2018-05-08 05:01:45]
rabdouhl :
App: 4.1.22
A/C: 01.04.0200
R/C: 01.03.1000
Precise Fly Safe DB (AC): 01.00.01.09
Precise Fly Safe DB (App): N/A
Basic Fly Safe DB: 00.00.00.00
[2018-05-08 05:16:07]
yihuasteven :
@rabdouhl It seems to be the same question I had last week. Taking a look at what I have done above may help, but I am still not clear what is the main cause.
[2018-05-08 05:16:30]
rabdouhl :
@yihuasteven Do you have it working yet?
[2018-05-08 05:16:35]
yihuasteven :
yes
[2018-05-08 05:16:40]
rabdouhl :
If so, can you share your "about"?
[2018-05-08 05:16:44]
rabdouhl :
:slightly_smiling_face: :slightly_smiling_face: :slightly_smiling_face:
[2018-05-08 05:17:14]
yihuasteven :
Now, or it used to be( when it was not working)
[2018-05-08 05:17:25]
rabdouhl :
uh, both would be fine
[2018-05-08 05:17:32]
rabdouhl :
ideal, in fact.
[2018-05-08 05:17:41]
rabdouhl :
but would settle for what it looks like when working
[2018-05-08 05:19:26]
yihuasteven :
App: 4.1.22
A/C: 01.04.0100
R/C: 01.04.0300
Precise Fly Safe DB (AC): 01.00.01.09
Precise Fly Safe DB (App): N/A
Basic Fly Safe DB: 00.00.00.00
Above is it used to be and currently is below
App: 4.1.22
A/C: 01.04.0100
R/C: 01.04.0300
Precise Fly Safe DB (AC): 01.00.01.08
Precise Fly Safe DB (App): N/A
Basic Fly Safe DB: 00.00.00.00
[2018-05-08 05:19:59]
rabdouhl :
sweet
[2018-05-08 05:20:03]
rabdouhl :
and how did you make it happen?
[2018-05-08 05:21:41]
yihuasteven :
i rooted the ac, deleted the nfz db and backup nfz db files, at this stage, the PFS DB(AC) seemed to become 00.00.00.00, and popped an error ( i cant remember quite clearly)
[2018-05-08 05:22:12]
yihuasteven :
then re-flashed 0.100 stock firm, PFS DB(AC) became 01.00.01.07
[2018-05-08 05:22:22]
yihuasteven :
and at last did the stage2.bin patch
[2018-05-08 05:23:49]
rabdouhl :
crazy
[2018-05-08 05:24:48]
rabdouhl :
I really appreciate the info.. @jezzab was quite confident you were wrong, but you've gotten it working!
[2018-05-08 05:24:59]
rabdouhl :
It is a little baffling - his script clearly clobbers the file.
[2018-05-08 05:25:06]
rabdouhl :
Maybe it also needs to clobber the backup file.
[2018-05-08 05:25:23]
yihuasteven :
sorry, i can't to tell what is the cause because I hardly know how it work
[2018-05-08 05:25:24]
rabdouhl :
So when you rooted the A/C, were you able to like SSH or telnet in?
[2018-05-08 05:25:32]
rabdouhl :
Or did you interact via FTP?
[2018-05-08 05:25:46]
rabdouhl :
I'm scared to try it right now, I'm proposing to my G/F this Sunday
[2018-05-08 05:25:55]
rabdouhl :
so I need my drone to work so it can capture the moment :slightly_smiling_face:
[2018-05-08 05:26:06]
yihuasteven :
I followed the tutorial, use the DUMLRacer to root
[2018-05-08 05:26:17]
rabdouhl :
Sorry, which tutorial is this?
[2018-05-08 05:26:18]
yihuasteven :
and use adb shell command to delete the NFZ files
[2018-05-08 05:26:23]
yihuasteven :
!wiki
[2018-05-08 05:29:13]
yihuasteven :
I suggest to make it safe.. ensure it work properly this Sunday :slightly_smiling_face:
[2018-05-08 05:31:23]
yihuasteven :
<https://greyarro.ws/t/how-to-root-your-dji-mavic-pro-phantom-4-and-inspire-using-dumlracer-and-completely-remove-nfz/1878>
[2018-05-08 05:31:26]
rabdouhl :
haha, like root it now to ensure it works sunday?
[2018-05-08 05:31:30]
yihuasteven :
this link also helps
[2018-05-08 05:31:30]
rabdouhl :
:stuck_out_tongue:
[2018-05-08 05:31:36]
rabdouhl :
thank you
[2018-05-08 05:33:12]
yihuasteven :
In your adb shell window, type:
cd ..
cd /data/upgrade/backups
ls
In this part in the link above , you will be unable to find this path, it should be /data/upgrade/backup, I think the author just made a mistake.
That's all I have got, good luck with you
[2018-05-08 05:34:39]
rabdouhl :
thank you sir!
[2018-05-08 05:34:51]
rabdouhl :
I will sleep on it, maybe try tomorrow.
[2018-05-08 09:22:33]
dan5000 :
Hey guys - I’ve just bought a Mavic Pro. Simple question - is it a good idea to stay on stock firmware to keep my options open, or should I just update?
[2018-05-08 09:23:55]
dan5000 :
As it’s nagging a lot :disappointed:
[2018-05-08 10:31:11]
erwin :
If you can downgrade, I would do that. But I recently learned that newer mavics require a teardown to add the internal SD before you are able to use a downgraded firmware
[2018-05-08 10:55:02]
dan5000 :
that’s what I understand too
[2018-05-08 10:55:19]
dan5000 :
Are you saying I should downgrade even further, as opposed to staying at stock/unchanged?
[2018-05-08 11:02:07]
paulpaws :
You will not be able to downgrade unless you know your mavic has the internal SD card
[2018-05-08 11:03:41]
paulpaws :
Do you know what version your MP is on?
[2018-05-08 11:48:20]
dan5000 :
I’ll check after work and try to ask again tomorrow, thank you :slightly_smiling_face:
[2018-05-08 11:48:39]
dan5000 :
is there a way to generally shut the app up about updates?
[2018-05-08 11:48:54]
dan5000 :
to firmware and fly zones..
[2018-05-08 12:16:41]
nocommie :
Yes, you need to patch your own app with the NFZ, fake login and offline patches at least, and also do the NFZ mod as outlined in the !wiki
[2018-05-08 12:17:19]
dan5000 :
Thank you @nocommie, I didn’t know about the wiki
[2018-05-08 17:10:28]
quad808 :
No, the response is...I didn't know about the !wiki
[2018-05-08 17:10:37]
quad808 :
as in !wiki
[2018-05-08 17:10:50]
quad808 :
!wiki..hahahaha
[2018-05-09 09:51:09]
dan5000 :
I’ve read the !wiki
[2018-05-09 10:24:39]
ender :
Yes, i must use stock APK as i use an Air (no modded apk yet) and i have it firewalled with AFWALL+ (root). Although some doubt if the firewall is perfect or not its a good way to stop the App from complaining. I only trust specifically AFWALL+ as i have reason to mistrust others.
[2018-05-09 11:40:28]
jackjay :
Hi, i did a rollback 01.03.0700 and changed speed,gps,nfz, etc params and then i upgradded to the modded V01.04.0100_Mavic_dji_system_NO_FC_UPDATE. I installed a patched DJI Go app 4.1.22 with goofline, fakelogin and the new nfzpatches. Should i stick with this or go for the new nfzbypass mod?
[2018-05-09 11:41:18]
ender :
never change what is working…
[2018-05-09 11:54:27]
dan5000 :
Anyone here use MavicPilots forums? Awaiting my registration being approved
[2018-05-09 11:59:29]
dan5000 :
NLD Mod client - OK or avoid?
[2018-05-09 12:16:33]
jackjay :
Does anyone know what the specs are of the drone and radio controller? like which software runs on the drone?
[2018-05-09 12:17:19]
jackjay :
NLD seems ok, what i've seen/read so far.
[2018-05-09 14:24:45]
cs2000 :
@dan5000 NLD is written by @coldflake, its fully endorsed by the OG's, is 100% trusted
[2018-05-09 14:43:30]
dan5000 :
Thanks @cs2000 :slightly_smiling_face: Who/what are the OG’s?
[2018-05-09 14:44:04]
dan5000 :
coming from the iphone jailbreaking world, I’ll assume that means devs/crackers of good standing!
[2018-05-09 14:52:43]
cs2000 :
@dan5000 The OG's are the group of people everyone here has to thank for developing the tools and finding the exploits that everything here runs on. This place ois like an onion. The channels you see here are only the top layer :wink:
[2018-05-09 15:05:29]
dan5000 :
ha - I shall enjoy the surface layer for now! thank you
[2018-05-09 15:27:30]
cs2000 :
@dan5000 if you like iOS stuff, come join ~ios_ipa_reversing channel :slightly_smiling_face:
[2018-05-09 15:43:42]
dan5000 :
@cs2000 will do, thank you.
[2018-05-09 17:08:44]
quad808 :
meh...OG's...who needs 'em.
[2018-05-09 17:09:08]
quad808 :
oh crap. Now jezzab is going to ban me. :grimacing:
[2018-05-09 17:09:54]
quad808 :
jk! !wiki
[2018-05-09 17:09:59]
quad808 :
!beer
[2018-05-09 17:11:25]
quad808 :
Oh and @dan5000 Don't buy NLD, I hear their support staff are crap.
[2018-05-09 17:11:50]
quad808 :
oh wait.......nevermind. Carry on.
[2018-05-09 17:12:58]
kool.stout12 :
@quad808 stop beating yourself up. LOL :laughing:
[2018-05-09 17:13:55]
quad808 :
GREAT things coming to NLD...just sayin....OG's = bombdiggity
[2018-05-09 17:17:19]
dan5000 :
@quad808 noted than you :wink:
[2018-05-09 17:17:27]
dan5000 :
*thank
[2018-05-10 00:37:21]
andrwho25 :
can’t wait to try my mavic air with NLD
[2018-05-10 07:45:19]
dan5000 :
for NLD, is the correct version of the IPA available anywhere for sideloading? If possible I think I’d rather do that than try to download from Apple using proxies etc
[2018-05-10 10:50:51]
cs2000 :
@dan5000 what are you after? NLD doesnt support modifying IPA's yet, only android for the moment
[2018-05-10 12:02:28]
dan5000 :
but it requires a certain version of IPA to run, doesn’t it?
[2018-05-10 12:02:39]
dan5000 :
so if I could get that older version, I could install it
[2018-05-10 12:26:23]
cs2000 :
No, cant support IPA's at all, only android APK's which you can get by typing !apk
[2018-05-10 12:47:53]
dan5000 :
> You can still use the NLD MOD Client to enable the mods even though you use an IOS device as your flight controller, just make sure that you use DJI Go prior to 4.1.4
[2018-05-10 12:47:58]
dan5000 :
<https://nolimitdronez.com/activation-key-for-nld-mod-client>
[2018-05-10 12:48:01]
dan5000 :
that’s an IPA.
[2018-05-10 13:47:26]
bin4ry :
yeah, but it won't mod the app. it will only allow you to do firmware mods and then you have to use an app prior 4.1.4 to keep them as after 4.1.4 the mods (firmware -> parameter mod) will most likely be restored
[2018-05-10 13:54:42]
erwin :
Do I need to insert the internal sd using NLD? If I have a newer mavic?
[2018-05-10 14:37:02]
dan5000 :
thank you @bin4ry
[2018-05-10 14:37:24]
dan5000 :
I found the IPAs in the end on the Wiki
[2018-05-10 14:37:41]
dan5000 :
annoyingly using a Mac at the moment so will need to virtual machine it
[2018-05-10 14:38:35]
bin4ry :
i see, i have no experience in it. i would recommend buying a decent not too expensive android device as a dedicated flying device. maybe a nice little tablet
[2018-05-10 14:39:55]
dan5000 :
funnily enough I dug out my iPhone 6S+ to do that with. Bigger screen than my X, brighter too.
[2018-05-10 14:40:20]
dan5000 :
Not android, but jailbroken
[2018-05-10 14:41:00]
dan5000 :
is the safe app version therefore 4.1.3, or 4.1.4?
[2018-05-10 14:41:01]
cs2000 :
Yep, you do, guide is on the wiki, search for mavic SD
[2018-05-10 14:41:24]
dan5000 :
going to have to do the SD on mine too :disappointed:
[2018-05-10 14:42:52]
bin4ry :
:smile:
[2018-05-10 14:43:20]
bin4ry :
few guys here can tell you about which tablet works good
[2018-05-10 14:43:30]
bin4ry :
it's really the "more" safe way to use an modded app
[2018-05-10 14:43:59]
dan5000 :
sure
[2018-05-10 19:34:31]
chipmangini :
What exactly makes this apk different from the "official" dJI one? dji.go.v4-4.1.22-3028592-noseceo.apk. Also, should I run deejayeye-modder on it? Thanks!
[2018-05-10 19:35:39]
mathieu.peyrega :
@chipmangini: secneo is a software protection layer (encryption) that prevent reverse engineering.
[2018-05-10 19:35:54]
mathieu.peyrega :
On a few versions, it has been removed thus allowing to create patched
[2018-05-10 19:36:12]
chipmangini :
@mathieu.peyrega Thanks!
[2018-05-10 19:36:14]
mathieu.peyrega :
so this version is the official version, with the protection layer removed
[2018-05-10 19:36:27]
mathieu.peyrega :
and you can only run the modder with this one
[2018-05-10 19:37:01]
chipmangini :
@mathieu.peyrega Perfect, doing it now!
[2018-05-12 04:35:23]
erwin :
Just a random tip: if you tap&hold (long time) the three line top right button on dji go 4 start screen, you get the current rc and ac fw versions plus a fw refresher/downgrader
[2018-05-12 05:58:27]
andrwho25 :
are we able to disable NFZ with mavic air ?
[2018-05-12 09:02:35]
validat0r :
No.
[2018-05-12 12:55:45]
chipmangini :
I ran the modder on "dji.go.v4-4.1.22-3028592-noseceo.apk" and installed on my device. Got to the sign in/sign up screen, and I entered djisucks for both and it wouldn't let me because of no network connection. When I turned on wifi, it said no such account, so no go! Any ideas?
[2018-05-12 13:01:29]
validat0r :
that's unusual. you must have done something wrong or installed the wrong apk
[2018-05-12 13:13:56]
bin4ry :
did you chose the correct patch ?
[2018-05-12 13:14:16]
bin4ry :
sounds to me like you didn'T
[2018-05-12 13:14:38]
bin4ry :
patch will allow fake credentials if no network connection and true credentials if you are connected to a network
[2018-05-12 13:32:21]
chipmangini :
NVM, I figured it out, and it works great! Thanks guys!!
[2018-05-12 13:35:10]
bin4ry :
cool
[2018-05-12 21:55:18]
chipmangini :
Should I be using a specific firmware for my P4P to take full advantage of the apk mods?
[2018-05-12 22:22:26]
lolo780 :
.509 flight control and the rest can be newer
[2018-05-12 23:30:39]
chipmangini :
@lowellfoo780 Thanks!
[2018-05-13 00:06:22]
chipmangini :
@lowellfoo780 What about a newer firmware and customizing modules to be installed? IE: <http://dji.retroroms.info/howto/modulemix>
[2018-05-13 00:06:46]
chipmangini :
any need?
[2018-05-13 00:26:39]
lolo780 :
Yeah I think you'll need newer to get pano shots. I'm on .509 with 300
[2018-05-13 06:53:09]
timopro :
hi all , I want to install a modded fw on my Mavic Platinum...I had a look around and it seams I have to install a uSD card as it seams it is not there by default on the Mavic Platinum... someone of you did already it?
[2018-05-13 07:45:16]
lolo780 :
Yep, drop it in
[2018-05-14 19:04:21]
timopro :
I installed the fw 1.4.300 on my MPP without adding the uSD... from stock flashed using the DDD with 1.4.300..I was also able to chamge parameter with DJI Assist 2 ...
[2018-05-15 01:07:24]
rabdouhl :
Is it possible to root mavic with dumlracer through windows?
[2018-05-15 01:07:32]
rabdouhl :
I'm viewing a tutorial which claims yes..
[2018-05-15 01:10:30]
rabdouhl :
but the other day jezzab said I should do it through linux, trying to understand why.
[2018-05-15 01:15:12]
jezzab :
DUMLracer is java. You could run it on your smart tv to root it lol
[2018-05-15 01:15:19]
nocommie :
lol
[2018-05-15 01:15:42]
jezzab :
You can certainly do it in Windows
[2018-05-15 01:16:05]
jezzab :
APK patching though I would recommend WSL or Linux but thats just me (more options)
[2018-05-15 01:16:34]
rabdouhl :
gotcha, gotcha, thanks dude
[2018-05-15 01:16:47]
rabdouhl :
I was just wondering, because original plan was to do it through VirtualBox
[2018-05-15 01:17:01]
rabdouhl :
mavic not appearing as a USB device though, not sure why.
[2018-05-15 01:18:06]
jezzab :
<https://www.youtube.com/watch?v=bR7VDamoevA>
[2018-05-15 01:18:50]
rabdouhl :
yep that's what I'm following
[2018-05-15 01:28:00]
rabdouhl :
Root race won :slightly_smiling_face:
[2018-05-15 02:01:47]
rabdouhl :
Thanks so much @jezzab, I'll go verify and let you know if we finally got it :wink: thanks a ton as always
[2018-05-15 02:47:59]
1313659 :
0905 - NFZ Database del
[2018-05-15 10:20:29]
b3he8iyzieybdamf :
using GoogleMap patced apk (windows) and useGoogleMap file in DJI folder I get the google logo on the map window but without an actual map! any ideas on what i am doing wrong?
[2018-05-15 10:46:02]
ender :
hmmm, i had a similar hang in litchi, do you use a Huawei device ?
[2018-05-15 10:56:10]
b3he8iyzieybdamf :
no samsung J7 2017
[2018-05-15 11:29:37]
ender :
well, then reinstalling Google play services probably dont help. Just try if you dont mind…
[2018-05-15 15:02:58]
mr.vibez :
Yeah that fixed it for me, disable google play services and reinstall.
[2018-05-15 15:56:09]
nocommie :
How are you guys using google for maps in the first place? I thought it was removed in the later versions of the app?
[2018-05-15 16:14:28]
mathieu.peyrega :
@nocommie: I pushed a patch to revive it yesterday
[2018-05-15 16:15:01]
mathieu.peyrega :
also, the app default to google app when cloned with an invalid HereMap key / package name pair
[2018-05-15 16:15:18]
mathieu.peyrega :
my patch allow to select which map layer before lauching the app
[2018-05-15 16:15:26]
nocommie :
ah ok. So using the latest nosec (4.1.22) you can use that to get google maps without cloning?
[2018-05-15 16:15:32]
mathieu.peyrega :
yes
[2018-05-15 16:15:42]
nocommie :
cool, thanks! I will give it a try
[2018-05-15 16:15:44]
mathieu.peyrega :
and you can switch between Here and Google
[2018-05-15 16:15:57]
mathieu.peyrega :
(need an app restart, but no reinstall)
[2018-05-15 16:16:04]
nocommie :
Nice
[2018-05-15 16:16:11]
mathieu.peyrega :
see patch description for instruction
[2018-05-15 16:16:24]
mathieu.peyrega :
basically if there is a file named useGoogleMap in /DJI/
[2018-05-15 16:16:27]
mathieu.peyrega :
in will use Google
[2018-05-15 16:16:31]
mathieu.peyrega :
otherwise Here
[2018-05-15 16:17:05]
mathieu.peyrega :
if your on CS, you need an extra patch (and of course google play services installed)
[2018-05-15 16:19:05]
nocommie :
Thanks, just read the patch desc. So I am guessing you could leave the file there and just rename it to useGoogleMapS and that would force Here maps?
[2018-05-15 16:22:31]
mathieu.peyrega :
yes
[2018-05-15 16:31:32]
rabdouhl :
@jezzab So after wiping the NFZ files, I ran the test and the DJI GO app was still red
[2018-05-15 16:31:40]
rabdouhl :
It said something like "unable to take off"
[2018-05-15 16:32:08]
rabdouhl :
but the big LED light on drone is no longer red like before the files were wiped
[2018-05-15 16:32:20]
rabdouhl :
and the R/C unit no longer says "NFZ"
[2018-05-15 16:32:28]
rabdouhl :
any ideas?
[2018-05-15 16:39:13]
rabdouhl :
I'm thinking I need to rebuild the APK.
[2018-05-15 17:48:46]
validat0r :
Yeah .. App has additional patches you would need
[2018-05-15 17:58:12]
rabdouhl :
I thought I did it before..
[2018-05-15 17:58:24]
rabdouhl :
but maybe screwed it up. Will do it on Linux this time.
[2018-05-16 08:37:29]
peter.leckarsch :
Hey, is it possible to use a modded 1.04.0100 and the new procedure to remove NFZ?
[2018-05-16 09:00:59]
jezzab :
Modded as in mixed modules?
[2018-05-19 07:36:47]
dan5000 :
can nolimitdronez do module mixing?
[2018-05-19 11:15:44]
neelix.one :
!apk
[2018-05-19 11:31:04]
cs2000 :
@dan5000 no it can’t do it.
[2018-05-19 11:34:27]
dan5000 :
Thanks
[2018-05-19 13:33:05]
yingd :
I installed Go4 4.1.22 error!
Reason for failure
(1)The system failed to install the pakage because it is attemptin to define a permission that is already defined by some existing package.
(2) Conflicting app DJI GO(dji.pilot).
[2018-05-19 19:14:24]
kilrah :
read the message then
[2018-05-19 21:07:23]
andrwho25 :
anyone got the link to NLD go app? do i have to specifically use NLD go app or any go app will work?
[2018-05-19 21:10:54]
kool.stout12 :
You will need to purchase a license from [nolimitdronez.com](http://nolimitdronez.com), download the app
[2018-05-19 21:11:01]
andrwho25 :
tried 4.1.22 up there, but it doesnt include mavic air. is there gonna be one with MA?
[2018-05-19 21:11:53]
andrwho25 :
I have a license, but the download link for the android NLD app doesnt show a download button
[2018-05-19 21:13:01]
kool.stout12 :
NLD is a Windows application.
[2018-05-19 21:14:20]
andrwho25 :
what app do you use to fly your drone?
[2018-05-19 21:14:27]
andrwho25 :
do you have an android or ios?
[2018-05-19 21:18:50]
kool.stout12 :
I have a Android and I use NLD GO. The NLD APP runs on Windows and within that application you can basically make the app for Android an copy it to your Android device via a usb cable and run it.
[2018-05-19 21:19:50]
andrwho25 :
Ah thanks, where did you download the NLD GO app for android?
[2018-05-19 21:27:06]
kool.stout12 :
I am not sure if you can use it with Air. They just updated it I think, so it might work.
You need to install and run the NLD APPLICATION on your windows PC and run it. Do that and check things out. They have a tutorial on the the website with videos and such
[2018-05-19 21:35:05]
andrwho25 :
Where’d you get the NLD Android App?
[2018-05-19 21:44:26]
kool.stout12 :
FROM within the NLD windows application. Just go there and look. Here's the link to the guide. <https://nolimitdronez.com/guide>
[2018-05-19 21:53:46]
andrwho25 :
oh i seee, thanks !
[2018-05-19 21:53:49]
andrwho25 :
it is greyed out for me
[2018-05-19 21:53:49]
andrwho25 :
:disappointed:
[2018-05-19 22:11:04]
kool.stout12 :
I think you need to validate your drone and license by connecting to your bird from your windows pc via usb cable.
[2018-05-20 01:32:18]
jabuasab :
How do you switch the spark from 5.8 to 2.4?
[2018-05-20 10:19:44]
validat0r :
@jabuasab use dji go 4 4.1.14
[2018-05-20 11:57:48]
jabuasab :
Which version of GO is the NLD app based off?
[2018-05-20 11:58:20]
jabuasab :
@ilovemynexus4 can you also change the wifi channels?
[2018-05-20 11:58:50]
validat0r :
well, it's sometimes a bit iffy if the change really worked ..
[2018-05-20 11:58:55]
validat0r :
but yes
[2018-05-20 12:00:00]
validat0r :
but i dont use it. i'm good with the default
[2018-05-20 12:00:36]
jabuasab :
ok cool thanks!
[2018-05-20 12:04:09]
validat0r :
and, of course, it helps to use OTG if your smartdevice doesnt support 5GHz wifi
[2018-05-20 13:39:25]
jabuasab :
@ilovemynexus4 is the 2.4 and 5.8 setting the control link or the connection between the phone and the controller?
[2018-05-20 14:04:29]
validat0r :
i think the RC - AC link
[2018-05-20 14:16:26]
jabuasab :
:+1:
[2018-05-20 14:29:07]
mathieu.peyrega :
confirmed
[2018-05-20 18:02:24]
rabdouhl :
When I turn on my Mavic Pro and launch the app, I'm getting "cannot take off"
[2018-05-20 18:02:34]
rabdouhl :
And it says Firmware Version Mismatch
[2018-05-20 18:03:01]
rabdouhl :
Any ideas on what this means? I attempted the NFZ bypass last weekend, and now this is what I'm seeing.
[2018-05-20 18:03:25]
rabdouhl :
(this is after rooting the drone and erasing the nfz db files)
[2018-05-20 18:34:19]
kilrah :
what app version
[2018-05-20 18:34:32]
kilrah :
newer apps will refuse to work without an nfz db.
[2018-05-20 18:36:22]
rabdouhl :
dji.go.v4-4.1.22-3028592-noseceo.apk
[2018-05-20 18:50:39]
rabdouhl :
I'm rebuilding it on linux now.. (previously used windows)
[2018-05-20 18:57:44]
rabdouhl :
hrm, so still getting 2 red LEDs on the drone.
[2018-05-20 18:58:06]
rabdouhl :
"cannot takeoff" "version mismatched" "check firmware version"
[2018-05-20 19:09:24]
quad808 :
What firmware? @rabdouhl
[2018-05-20 19:14:11]
rabdouhl :
right now it shows as blank in the app
[2018-05-20 19:14:37]
rabdouhl :
but last week before rooting it, I flashed to V01.04.0200
[2018-05-20 19:41:45]
bin4ry :
did you flash 2 times? did you upgrade all your batteries?
[2018-05-20 19:44:03]
mail451 :
Is there a way to bypass having to create an account and logging in into the GO 4 app?
[2018-05-20 19:47:50]
mathieu.peyrega :
@mail451: yes
[2018-05-20 19:48:06]
mathieu.peyrega :
fakelogin patch in modder
[2018-05-20 19:48:30]
mail451 :
can you link me to the modder? Im new to DJI and drones in general
[2018-05-20 19:48:40]
mathieu.peyrega :
<https://github.com/Bin4ry/deejayeye-modder>
[2018-05-20 19:49:22]
rabdouhl :
@bin4ry What do you mean upgrade my batteries?
[2018-05-20 19:49:53]
rabdouhl :
I didn't double flash..will try it now.
[2018-05-20 20:00:14]
rabdouhl :
@bin4ry Had no idea about the batteries even having f/w..thanks!
[2018-05-20 20:13:32]
rabdouhl :
Double flash did not help.
[2018-05-20 20:14:53]
rabdouhl :
So what I'm doing is - flash to V01.04.0200, then `adb shell`, mount /amt, `rm -rf /nfz` + `rm /data/upgrade/backup/0905 backup.sig`
[2018-05-20 20:15:08]
rabdouhl :
I've confirmed that it'll fly before I do the `rm` operations..
[2018-05-20 20:17:02]
validat0r :
AFAIK simple removing /amt/nfz doesnt help you
[2018-05-20 20:18:19]
validat0r :
AFAIK you have to emtpy the big table in /amt/nfz/nfz.db and patch your /system/bin/dji_flight, which is done by the stage2.bin linked in the !wiki (if you are doing it for mavic pro)
[2018-05-20 20:18:51]
rabdouhl :
Got you.. I'll copy those files over
[2018-05-20 20:20:07]
rabdouhl :
I'll pull those from stage2.bin. Thanks validat0r
[2018-05-20 20:20:46]
validat0r :
yup, the nfz.db and the dji_flight from stage2 should do the trick (for mavic pro)
[2018-05-20 20:20:58]
rabdouhl :
along w/ rm -rf 0905?
[2018-05-20 20:21:08]
validat0r :
can't say
[2018-05-20 20:21:25]
validat0r :
probably won't hurt
[2018-05-20 20:21:38]
validat0r :
but have a look at the "grep" script
[2018-05-20 20:27:15]
rabdouhl :
am doing already :slightly_smiling_face:
[2018-05-20 20:42:52]
rabdouhl :
Alright, I think it worked!!! Thanks @ilovemynexus4 @bin4ry
[2018-05-21 19:01:34]
nospam :
Kudos to all of you who made it possible for me to fly a Spark in Waypoint mode with a pre planned route... :stuck_out_tongue_winking_eye: (and with good signal strength due to FCC-hack) :satellite_antenna:
[2018-05-21 19:04:28]
validat0r :
It's fun, indeed
[2018-05-21 19:07:02]
mathieu.peyrega :
you can draw very accurate skydicks :slightly_smiling_face:
[2018-05-21 19:10:58]
nospam :
**hehe** Well, im trying to improve my 3D-model, previously I have been flying in a "non structured" way... <https://sketchfab.com/models/94fc5988fcc5447c85298e8f44dde82b>
[2018-05-21 19:16:15]
mathieu.peyrega :
<http://matioupi.free.fr/gaec/gaec.html>
[2018-05-21 19:16:25]
mathieu.peyrega :
I did this a while ago with Spark too :slightly_smiling_face:
[2018-05-21 19:22:37]
nospam :
Nice, its fun and it keeps the GPU/CPU busy :wink: Hmmm... Any chance to get DNG's from a Spark?
[2018-05-21 19:26:19]
nospam :
I'm using Agisoft Photoscan.
[2018-05-21 19:49:50]
mr.vibez :
Looks great, this was my attempt from a video I shot <https://sketchfab.com/models/eec1038a47014e0ba07d9c39c44172ea>
[2018-05-21 20:05:52]
nospam :
With chemtrails... :wink:
[2018-05-22 22:31:16]
irischnpak :
!apk
[2018-05-25 02:36:44]
andrwho25 :
weird I set the MA with NLD at max 10m/s descent but i don’t think it affects it. it still descends very slowly. even slower than stock i think.
[2018-05-25 02:38:34]
quad808 :
Auto descend?
[2018-05-25 02:38:58]
quad808 :
or did you drop the throttle?
[2018-05-25 03:17:04]
mr.vibez :
I wonder if NLD has found the correct parameters for the MA. they are different to other mavics
[2018-05-25 07:28:13]
ender :
Hmm, my changes in ascent & descent speed in normal & sports seem to work (.300 FW)
[2018-05-25 13:10:00]
andrwho25 :
hmm. on a mavic air ?
[2018-05-25 13:10:31]
andrwho25 :
quad808: not auto descend. just pushing down on stick goes extremely slow
[2018-05-25 13:19:40]
ender :
yes on MA, but i just upped to 5m/s. maybe there is a hardwired limit that you cross with 10 so it gets reset ?
[2018-05-25 13:31:12]
andrwho25 :
hmm ok let me try to set it back
[2018-05-25 13:31:40]
andrwho25 :
it goes up extremely quickly but down notsomuch
[2018-05-27 14:27:01]
dposea :
Sorry to ask but where can I download RC 1.8.0 firmware?
[2018-05-27 14:27:18]
dposea :
For P4 standard
[2018-05-27 14:56:35]
chipmangini :
@dposea This should do it <http://dji.polybotes.feralhosting.com/DJI%20Firmware/>
[2018-05-27 14:59:26]
dposea :
It's not there, I already looked there. I found a copy on my phone but 1.8.0 is 4.4 megs, while 1.9.3 is over 30 megs. Doesn't seem right.
[2018-05-27 15:02:11]
dposea :
It may be too late to downgrade. My attempt to go to 1.9.3 fails at 35% on both android and iOS phones. Restoring does not seem to fix my RC. The left light stays white and it turns on with one button press.
[2018-05-27 15:12:24]
dposea :
L
Can I decrypt the upgrade log from my phone with the aes decryot?
[2018-05-27 18:47:48]
cs2000 :
@dposea it may be correct. Often RC upgrades contain minimal data. If you try flashing it with DumlDore it will fail if it’s not a complete file. If it is complete, send me a direct message as I’d be keen to get the file from you if I don’t have it in the !ddd database
[2018-05-27 21:26:44]
dposea :
They are not in Ddd. . I tried pyduml but I'm a little confused. First it tries to open a serial port, then tries to connect to an rndis ethernet gadget. I don't see how that works, unless the device switches its otg type.
[2018-05-27 21:27:23]
dposea :
Dji go 4 fails the 1.9.3 update at 35%. Downgrading appears to work but the RC appears stuck in a boot loader mode. Based on the response from dji they may have locked 1.9.3 down so you cant downgrade. They want the unit sent to them. If I can decrypt the log I'll have a better idea of why its failing. I tried both iOS and android apps. The weird thing is iOS turns the first led blue, with android it stays white.
[2018-05-30 03:20:46]
kang :
is there any prior work on things that work for the mavic **air**? google seems to say mostly no, just looking at whats been done before i dig into mine
[2018-06-01 01:20:00]
ls7454 :
anyone know where i can find V02.04.02.00 for ZS600B CS? :+1:
[2018-06-01 05:47:02]
paulpaws :
Try asking in the cs channel
[2018-06-01 08:17:20]
ls7454 :
thanks for that. Will do.
[2018-06-09 22:31:52]
doubleohasian :
I'm in need of spoon-feeding! If I deactivate g_config_gps_cfg_gps_enable will that effectively put my mavic in Atti mode? Or do I have to deactivate the compass too?
[2018-06-09 22:34:38]
ben_lin :
A way you can do this
[2018-06-09 22:34:55]
ben_lin :
Is to chAnge the behavior of the RC mode switch
[2018-06-09 22:35:04]
ben_lin :
So instead of going into sport
[2018-06-09 22:35:14]
ben_lin :
U can switch from normal to atti
[2018-06-09 22:35:40]
doubleohasian :
hmm interesting, I'll look a little more into it
[2018-06-09 22:35:41]
doubleohasian :
thanks.
[2018-06-09 22:35:55]
ben_lin :
I remember reading upon this on wiki
[2018-06-09 22:36:23]
doubleohasian :
I'm in there not perousing... not finding much about yet. However, I've only been reading like 2 min
[2018-06-09 22:36:23]
ben_lin :
@lowellfoo780 did you try this? I thought either you or @quad808 did
[2018-06-09 22:36:46]
ben_lin :
I just know that you can do it…
[2018-06-09 22:37:42]
doubleohasian :
I'm an Engineer at a Steel mill. I'm looking to use the mavic to do building and structural inspections. With all the ferrous dust and metal around, it throws my mavic haywire. Goal is to rely totally on my piloting skills instead of compass and GPS.
[2018-06-09 22:37:43]
ben_lin :
Essentially there are parameters that defines the actions of the mode switcher
[2018-06-09 22:38:26]
ben_lin :
Find those params… I remember there is a list on wiki
[2018-06-09 22:38:47]
ben_lin :
Well there is atti and then full manual
[2018-06-09 22:39:00]
doubleohasian :
wait, full manual?
[2018-06-09 22:39:05]
doubleohasian :
as in an accro flight?
[2018-06-09 22:39:20]
ben_lin :
Yeah… it is one of the modes
[2018-06-09 22:39:37]
ben_lin :
But surely the gimbal would go nuts
[2018-06-09 22:40:46]
doubleohasian :
yea, IMU still functions but compass gets going crazy and I have to fight the mavic for control.
[2018-06-09 22:41:33]
ben_lin :
Here
[2018-06-09 22:41:35]
ben_lin :
<http://dji.retroroms.info/howto/parameterhacks>
[2018-06-09 22:41:38]
ben_lin :
Found it
[2018-06-09 22:42:24]
ben_lin :
Also you want to turn off OA
[2018-06-09 22:43:05]
doubleohasian :
Is altitude stabilization using the sonar or GPS?
[2018-06-09 22:43:45]
ben_lin :
Not sure… as the sonar only works at low altitudes
[2018-06-09 22:43:50]
ben_lin :
Also
[2018-06-09 22:44:10]
ben_lin :
Atti mode limits the height by default to like 30m
[2018-06-09 22:44:49]
doubleohasian :
oh, some of the inspections I'll be doing are in excess of that. seems like I'll have to play around with it in an open field first
[2018-06-09 22:44:51]
ben_lin :
Also there is OPTI mode
[2018-06-09 22:45:02]
ben_lin :
Yeah definitely
[2018-06-09 22:45:10]
ben_lin :
You can change that value tho
[2018-06-09 22:45:29]
ben_lin :
In my experience, OPTI mode works best in doors
[2018-06-09 22:45:42]
ben_lin :
But beyond 20m it is unreliable
[2018-06-09 22:46:01]
doubleohasian :
appreciate it... I'm thinking I might try to find a way to program to 5 way button to change modes. If not this'll have to do, I'll just have to modify the switch to support whatever two modes I'll be usings.
[2018-06-09 22:46:28]
doubleohasian :
20m distance from controller or 20m altitude?
[2018-06-09 22:46:36]
ben_lin :
Altitude
[2018-06-09 22:46:52]
lolo780 :
You can change that. Mine is set to 99999
[2018-06-09 22:47:00]
doubleohasian :
yea I'll be going higher than that inside the mill.
[2018-06-09 22:47:06]
ben_lin :
It essentially utilizes the bottom facing camera to do the stabilization
[2018-06-09 22:47:12]
doubleohasian :
ok
[2018-06-09 22:47:13]
lolo780 :
I never tried disabling gps
[2018-06-09 22:47:17]
ben_lin :
So u go too high it would fail
[2018-06-09 22:47:48]
ben_lin :
Sometimes in doors you get poor gps
[2018-06-09 22:47:55]
ben_lin :
Which fucks over even more
[2018-06-09 22:48:21]
ben_lin :
Going manual control in doors is a must
[2018-06-09 22:48:54]
doubleohasian :
the majority of inspections would be indoors above heights of 60 ft (20ish m) and outdoors 60ft to 150 ft (20m to 50m)
[2018-06-09 22:49:04]
doubleohasian :
definitely going to have to fine tune it a bit.
[2018-06-09 22:50:05]
doubleohasian :
thanks guys
[2018-06-09 22:50:18]
ben_lin :
Yeah. The 5 button control follows the app not the bird
[2018-06-09 22:50:24]
ben_lin :
Just so you know
[2018-06-09 22:50:36]
doubleohasian :
ugh, annoying
[2018-06-09 22:50:39]
doubleohasian :
I use lichi
[2018-06-09 22:50:52]
doubleohasian :
I avoid DJI Go
[2018-06-09 22:50:55]
ben_lin :
Yeah try this…
[2018-06-09 22:51:12]
ben_lin :
Programm one of them to turn on off the arm light
[2018-06-09 22:51:31]
ben_lin :
And then disconnect phone, restart RC, try the button
[2018-06-09 22:52:11]
ben_lin :
lol u should have got the M210
[2018-06-09 22:52:44]
doubleohasian :
yea my employer doesn't want to pay for that
[2018-06-09 22:52:53]
doubleohasian :
we'd be looking at $13k after camera ect
[2018-06-09 22:53:01]
ben_lin :
That thing gets the job done tho
[2018-06-09 22:53:32]
doubleohasian :
If I can jerry-rig multiple mavericks then we can us them as an almost dispensible item and have extras for parts if necessary
[2018-06-09 22:53:38]
doubleohasian :
really cheap-skate way to go
[2018-06-09 22:53:44]
doubleohasian :
but, I'm not the decision maker
[2018-06-09 22:54:07]
ben_lin :
800 usd
[2018-06-09 22:54:45]
ben_lin :
Whats ironic is that MP has 1080p live feed
[2018-06-09 22:54:57]
ben_lin :
While I2/P4P does not
[2018-06-09 22:55:35]
doubleohasian :
what, are they 720p?
[2018-06-09 22:55:41]
ben_lin :
Yep
[2018-06-09 22:56:23]
ben_lin :
The new p4p v2.0 has 1080p
[2018-06-09 22:56:37]
ben_lin :
But that thing is loud af
[2018-06-09 22:57:32]
doubleohasian :
is there any power loss to the new 'silent' props?
[2018-06-09 22:57:54]
ben_lin :
No…
[2018-06-09 22:58:20]
ben_lin :
I used them and found no performance impacts
[2018-06-09 22:58:30]
doubleohasian :
noticeable noise difference?
[2018-06-09 22:59:06]
ben_lin :
But they are annoying to keep…. Yeah, lower pitch and quiter especially at high speeds
[2018-06-09 22:59:27]
ben_lin :
The MPP is the quietest here
[2018-06-09 23:00:16]
ben_lin :
The tip of the low noise props gets bent if you fold them right beneath the AC, just like in the promos
[2018-06-09 23:01:18]
doubleohasian :
eh not worth it then, noise doesn't bother a steel mill... it's plenty noisy
[2018-06-09 23:01:19]
ben_lin :
TBH, if ur company is using drone for indoor inspection they probably won’t care about noise
[2018-06-09 23:01:23]
ben_lin :
Yeah
[2018-06-09 23:01:42]
ben_lin :
Standard props are easier to deal with
[2018-06-09 23:02:08]
ben_lin :
Anyway I gotta go, good luck on figuring it out
[2018-06-09 23:02:15]
doubleohasian :
thanks, Lin
[2018-06-09 23:02:24]
ben_lin :
:D
[2018-06-09 23:03:40]
lolo780 :
The p4p v2.0 props are quieter. I just tried a set on my p4a.
[2018-06-10 04:15:53]
mrysanek :
@doubleohasian <https://www.youtube.com/watch?v=26FsemqIhXU&t=163s> gotta have DJI Assistant 1.1.2, not the latest.
[2018-06-10 04:27:33]
jezzab :
<https://dji.retroroms.info/howto/parameterhacks>
[2018-06-10 04:27:48]
jezzab :
Remote - Mode Switch ^^
[2018-06-10 04:52:03]
mrysanek :
@jezzab Yeah, found that after hitting the way-back machine on ~general...
[2018-06-10 06:15:10]
ben_lin :
Lol
[2018-06-10 16:51:24]
doubleohasian :
Thanks, @mrysanek
[2018-06-10 17:43:30]
ender :
@doubleohasian The mode thing stuff is quite old, be aware that if you switch to Acro = full manual you will probably ruin your Gimbal doing those nasty flips :wink:
[2018-06-10 19:51:28]
doubleohasian :
lol, @ender I'm more likely to disable the gimble all together and keep the locking mechanism on if I'm doing full acro.
[2018-06-10 19:51:53]
ender :
:+1: Thats what i did the onetime trying it on my MP :wink:
[2018-06-10 20:42:24]
hotelzululima :
!apk
[2018-06-13 14:58:20]
dan5000 :
anyone successfully rolled back/modded a Platinum yet? Advice is unclear
[2018-06-13 14:59:15]
cs2000 :
yes, lots of people
[2018-06-13 14:59:36]
cs2000 :
standard mavic firmware works on the MPP as the ESC just skips the downgrade as the firmware isnt applicable to it
[2018-06-13 15:08:40]
dan5000 :
cool, thank you :slightly_smiling_face:
[2018-06-13 15:08:54]
dan5000 :
that’s convenient - thanks DJI!
[2018-06-13 15:09:54]
cs2000 :
@dan5000 as a fuller explanation
The MP and MPP use identical firmware packages. The main difference in the MPP is the new ESC (motor driver circuitry) which has some different code in it compared to the older MP's ESC.
The way the firmware updates work is each module looks for its corresponding update package and applies it. Lets (for example) say the MP ESC is looking for a file called 100, and the new MPP's ESC is looking for one called 101.
If you downgrade your MPP using the MP firmware V01.03.0700, this contains all the files required to downgrade the rest of the bird, but as it was made before the MPP was released, it only has the 100 ESC firmware and not the 101. As such, the MPP ESC will simply skip the downgrade, but all other modules will downgrade to V01.03.0700.
[2018-06-13 15:10:38]
dan5000 :
cool
[2018-06-13 15:10:42]
dan5000 :
thank you
[2018-06-13 15:17:36]
fredz :
If we use an MPP with 01.03.0700 and modded DJI go 4.1.22 , will all intelligent modes still work?
[2018-06-13 15:18:19]
cs2000 :
Think so, but i dont have one so dont know. Youll probably have to use an older version of Go4, from around the same time too.
[2018-06-13 15:24:47]
fredz :
I suppose the same question goes for a normal MP with 01.03.0700 and 4.1.22. Has anyone tried the intelligent modes there?
[2018-06-13 15:43:49]
cs2000 :
yes, they dont work (in my case)
[2018-06-13 15:44:06]
cs2000 :
and others reported in the past, active tracking etc fails to do anything
[2018-06-13 15:46:52]
fredz :
What modes do work? Like POI?
[2018-06-13 15:47:36]
cs2000 :
Not tried them all. For me active track was the only intresting one and i gave up after that. Im pretty sure using a Go4 version from around the same time would make it work
[2018-06-13 15:47:51]
cs2000 :
just not had the time, nor the inclination to test it
[2018-06-13 16:36:45]
andrwho25 :
Any progress on MA NFZ?
[2018-06-13 16:46:02]
ender :
nope, diff did not have the time to finish secneo and also other stuff yet doesnt fit.
[2018-06-13 16:58:13]
quad808 :
Why is it that all the mods can't be done, with everything unlocked and boosted RC, NFZ bypassed, Altitude unlocked, latest GO can be patched, patch to the firmware for new mavics and Platinums so I don't need to install an SD card? And why don't they all come with silent props? I don't want to contribute or pay anything. I want, I want, I w a n t ! Can't someone help me? You guys are all jerks! You just want to keep everything for yourselves.
[2018-06-13 17:02:40]
quad808 :
Hmmmm....I think I forgot to take my "I wanna help people" meds this morning
[2018-06-13 17:03:26]
quad808 :
!wiki
[2018-06-13 17:03:33]
quad808 :
thats better
[2018-06-13 17:44:03]
andrwho25 :
hey quad808/ender, glad to help the process, just let us know what needs to be done and what’s already accomplished
[2018-06-13 17:50:24]
ender :
well, Mavic Air is better protected then the others, so most exploits are gone, module checking is stricter, new (non-braindead) encryption keys are in place. So find us some new root exploits and rev-engineer those pesky keys, that would help :wink:
And on the App side, latest MA supporting Apps can not be patched as the app is made (more) tamper proof via (better) secneo protection. diff is one of the few people in known universe standing a chance to break secneo, if you happen to be one of the other people, lend him a hand :wink:
I hope that somewhat accurately sums it up about the MA, i probably missed some fine points but thats typical for me :slightly_smiling_face:
[2018-06-13 17:53:05]
ender :
…and quad is slightly p*ssed as today many questions-posed-as-demands were posted today, some in an unfriendly way so thats not helping :slightly_smiling_face:
(NOT meaning you, undefined). It just feels like Monday after a hard-party-weekend somehow :slightly_smiling_face:
[2018-06-13 18:17:56]
quad808 :
@jezzab better not ban me now.
[2018-06-13 18:33:20]
ender :
lolz :wink:
[2018-06-13 21:53:04]
jezzab :
Pfft I was gonna make it the channel topic
[2018-06-13 22:29:50]
quad808 :
DON"T BAN ME BRO
[2018-06-13 22:29:54]
quad808 :
should be the topic
[2018-06-21 17:35:34]
kyokushin :
hello, quick question about "g_config_airport_limit_cfg_cfg_limit_data","VALUE":20250910
[2018-06-21 17:35:41]
kyokushin :
NFZ in spark
[2018-06-21 17:35:45]
kyokushin :
what does it mean 20250910 ?
[2018-06-21 17:35:57]
kyokushin :
i know its a date, but what if i will put 2099?
[2018-06-21 17:36:11]
kyokushin :
why 20250910 and not other date? It does matter?
[2018-06-21 17:41:56]
quad808 :
this value turns OFF NFZ from taking action to ground your bird
[2018-06-21 17:42:11]
quad808 :
[nfz](#G8XR1R91V) disable ( ) are defaults
g_config_airport_limit_cfg_cfg_disable_airport_fly_limit = 1 (0)
g_config_airport_limit_cfg_cfg_limit_data = 20250910 (20150910)
[2018-06-21 17:46:42]
kyokushin :
yes, but why 20250910
[2018-06-21 17:46:46]
kyokushin :
what will be after that date?
[2018-06-21 17:50:16]
quad808 :
dunno. You could ask DJI, but something tells me that they won't tell you....LOL
[2018-06-21 17:52:19]
kyokushin :
:slightly_smiling_face: so that is just date or specific 'unlock' date?
[2018-06-21 17:52:36]
kyokushin :
i am curious a that date does matter or not
[2018-06-21 17:58:52]
quad808 :
¯\_(ツ)_/¯
[2018-06-21 18:33:27]
kyokushin :
next question - which variable is responsible for activation?
[2018-06-21 19:02:28]
kyokushin :
Should aircraft S/N be the same as mobo S/N?
[2018-06-21 19:03:03]
kyokushin :
i am asking because i have different mobo S/N readed by NLD and different S/N on stick under battery
[2018-06-21 23:32:22]
kyokushin :
what is "precise" database in the DJI GO 'about' tab? i used NLD and have some version different than 0.0.0.0
[2018-06-21 23:32:25]
kyokushin :
its ok?
[2018-06-21 23:40:41]
kyokushin :
after ndz patch i have 01.00.13.37, is that ok?
[2018-06-21 23:50:23]
quad808 :
PERFECT!
[2018-06-22 00:00:13]
kyokushin :
:heart:
[2018-06-22 09:21:07]
pingspike :
Guys, I thought there was a public slack invite on the wiki but a search is showing nothing - how do we invite other people to join us here on slack?
[2018-06-22 09:29:41]
cs2000 :
@rich <https://join.slack.com/t/dji-rev/shared_invite/enQtMjk5OTEyMzcyMjI3LTdlZjY4NzQ5M2M2NmE5ZWM4OTgyNThmZDVmZjdjODE4ODYyNmYwZjYxMDcyYzcxNmZlYzI5ZjI2ZGQ2NGY1ZTc>
[2018-06-22 09:29:44]
cs2000 :
if its still valid
[2018-06-22 09:37:57]
pingspike :
cheers Chris, couldn't find that anywhere!
[2018-06-22 09:38:07]
cs2000 :
is on my github :slightly_smiling_face:
[2018-06-22 09:38:10]
pingspike :
ah
[2018-06-22 09:38:11]
pingspike :
lol :slightly_smiling_face:
[2018-06-22 09:55:10]
jezzab :
The invite ur talking about is on deejayeye modder github page @rich
[2018-06-22 09:55:23]
jezzab :
(and around the place)
[2018-06-22 10:09:18]
pingspike :
ahhhhh - I searched all over retroroms wiki looking for it too! cheers @jezzab :+1:
[2018-06-22 10:20:56]
jezzab :
Copy the text and submit it mate
[2018-06-22 10:21:11]
jezzab :
They are all being added to a database.
[2018-06-22 10:22:10]
jezzab :
Don't just send a screenshot.
[2018-06-22 10:22:50]
validat0r :
looks like .0900 with missing 905
[2018-06-22 10:23:24]
pawel.smile :
hey just restarted, and now it's Ready status
[2018-06-22 10:29:57]
pawel.smile :
but nothing more than that, all buttons disabled
[2018-06-22 10:30:09]
pawel.smile :
@pawel.smile uploaded a file: [then I restarted, it creashed with](https://dji-rev.slack.com/files/U8PCEHG0K/FBC6BQAKV/image.png)
[2018-06-22 10:30:30]
pawel.smile :
and on consecutive runs as administrator Im getting
[2018-06-22 10:30:34]
pawel.smile :
@pawel.smile uploaded a file: [image.png](https://dji-rev.slack.com/files/U8PCEHG0K/FBC2QAR1S/image.png)
[2018-06-22 10:31:07]
pawel.smile :
Im not into windows really.. I might've broken smth
[2018-06-22 10:33:02]
pawel.smile :
ok, now it works, I had to kill some setup.exe processes.
[2018-06-22 10:33:47]
pawel.smile :
oh wow, awesome I can downgrade remote firmware, that's what I was looking for
[2018-06-22 10:54:25]
pawel.smile :
sorry for being a n00b but Im clicking "remove NFZ" button then, I can see NFZ db is downloading, then assistant2 is killed and then the following message is shown
[2018-06-22 10:54:29]
pawel.smile :
@pawel.smile uploaded a file: [image.png](https://dji-rev.slack.com/files/U8PCEHG0K/FBD6VV430/image.png)
[2018-06-22 11:00:23]
cs2000 :
@pawel.smile log a support ticket plz
[2018-06-22 11:00:33]
cs2000 :
[suppport.nolimitdronez.com](http://suppport.nolimitdronez.com)
[2018-06-22 11:01:36]
pawel.smile :
hmm ok, I thought I'm doing something obviously wrong, any someone might point that out
[2018-06-22 11:09:04]
ben_lin :
On a non related note
[2018-06-22 11:09:29]
ben_lin :
@pawel.smile are u running a retro-themed win10?
[2018-06-22 11:09:35]
ben_lin :
Or win98 or sth
[2018-06-22 11:09:42]
ben_lin :
That window looks dated lol
[2018-06-22 11:11:04]
ben_lin :
Nice.
[2018-06-22 11:12:02]
pawel.smile :
win 7
[2018-06-22 11:21:05]
cs2000 :
Thats part of what youre doing wrong. NLD is much better in W10, but does work on 7. Log a ticket and we will help you out
[2018-06-22 11:40:17]
pawel.smile :
on my other PC, with windows 10, dji assistant (downloaded from nld) doesnt recognise the drone
[2018-06-22 11:40:43]
pawel.smile :
but I will try harder
[2018-06-22 13:46:49]
pawel.smile :
this is nuts, I spent 3 hours already trying to make dji assistant recognise the drone, no luck.
[2018-06-22 14:09:39]
cs2000 :
@pawel.smile does Assistant 2 not see the drone, what version?
[2018-06-22 14:10:53]
pawel.smile :
it doesn't, v1.1.2 windows 10, disabled driver signature enforcement and reinstalled multiple times
[2018-06-22 15:30:00]
nocommie :
Win10 has horrible power management for USB. I would disable it. Do it in the GUI in device manager and via the registry.
[2018-06-22 15:30:20]
nocommie :
It can turn off the USB even when a device is connected
[2018-06-22 16:26:20]
kyokushin :
thats true
[2018-06-22 16:27:12]
kyokushin :
use dji cable and usb slot directly on mobo (if you have gloriouspcmasterrace)
[2018-06-22 16:29:03]
kyokushin :
i softbricked spark two weeks ago, i think the root cause was usb switch
[2018-06-22 16:30:02]
kyokushin :
and some usb devices may cause conflicts, i have such bluetooth adapter - if itbis plugged in, no matter where, then it interrupting other devices work
[2018-06-22 17:22:36]
jtrjr01 :
@jtrjr01 shared a file: [Thank you for all you've done!](https://dji-rev.slack.com/files/UBB6L4KQA/FBC142XQ9/Thank_you_for_all_you_ve_done_)
[2018-06-22 17:23:27]
jtrjr01 :
As you can see, I don't know how to use Slack either!
[2018-06-22 17:25:17]
quad808 :
@jtrjr01 No worries...you are in the right place to ask questions!
[2018-06-22 17:25:38]
quad808 :
NLD is conceived by, run by and contributed by the OG's
[2018-06-22 17:25:58]
quad808 :
as a way to keep development going on all of this
[2018-06-22 17:26:54]
quad808 :
myself and cs2000 work support for NLD, so if you have questions, best way is to just open a ticket. Go here: [support.nolimitdronez.com](http://support.nolimitdronez.com)
[2018-06-22 17:35:17]
jtrjr01 :
@quad808 Thanks for the welcome! Am I better off with NLD or going the DeeJayEye-Modder route? I've rolled all of the available GO versions through the modder. I'm currently on the 4_4.1.15_V3027412-nosecneo version. No maps and no OTG. Other than that it seems to be working correctly. Any words of wisdom?
[2018-06-22 17:36:38]
quad808 :
It depends on you...if you are rolling your own GO versions, (the way to go, unless you get them from NLD) you have more control...use NLD for an easy way to tweak parameters.
[2018-06-22 17:37:33]
quad808 :
If you use the NLD GO, you get the fancy NLD graphics in GO! Totally up to you. You do NOT need to use the NLD GO in order to use NLD.
[2018-06-22 17:39:46]
quad808 :
Going forward, lots more good things coming to NLD
[2018-06-22 17:46:30]
jtrjr01 :
@quad808 I don't think 4.1.15 is available on NLD, is it?
[2018-06-22 17:48:45]
jtrjr01 :
@quad808 any thoughts on the best firmware versions to use with the Spark? I've gone up to update the batteries and now I'm on .701. I've seen a few posts that say to stay on .300.
[2018-06-22 18:04:59]
kyokushin :
I am curious - a litchi is switching FCC and updating NFZ database or not?
[2018-06-22 18:16:03]
quad808 :
@jtrjr01 Spark. If you don't care about altitude bypass, use NLD, go to .0900, then run the NLD NFZ patch. No NFZ, and you have the latest firmware. Otherwise use .0300, and only use with patched GO, otherwise Spark may lock with forced firmware update. Thanks DJI
[2018-06-22 18:17:08]
quad808 :
If you are using OTG, 4.1.22 is borked for OTG. Again. Thanks DJI
[2018-06-22 18:36:32]
kyokushin :
it is worth to mention - on .300 aeroscope packets are not spreaded, on .900 - rather yes. I am considering to use mixed - .900 FC but android/loader part from .300
[2018-06-22 18:37:15]
mathieu.peyrega :
@kyokushin: All thirdparty apps using DJI SDK do have their own local copy of database so the bird side NFZ will not work with them
[2018-06-22 18:37:41]
nocommie :
@quad808 any idea if setting custom info for aeroscope is in the works for NLD? It would be cool to put whatever message you want in the info sent to aeroscope. For example "FuckDJI"
[2018-06-22 18:39:14]
kyokushin :
@mathieu.peyrega i am curious a case: spark with flushed 905 module (clean NFZ) + litchi. Which database will be used.
[2018-06-22 18:39:44]
mathieu.peyrega :
litchi "DJI SDK" database
[2018-06-22 18:40:16]
mathieu.peyrega :
if you use Pix4D + CTRL+DJI will be "DJI SDK" database too
[2018-06-22 18:40:21]
mathieu.peyrega :
etc.
[2018-06-22 18:40:22]
kyokushin :
@nocommie its easy to to push a message, but the problem are the spreaded home point and craft coordinates and s/n (connected with email).
[2018-06-22 18:40:22]
jtrjr01 :
@quad808 Thank you very much. I have only used the NLD & (DeeJayEye-Modder) Roll My Own patched versions on my new Spark. I don't even want to install the original GO App if I don't have too. I just don't want to give them access to all of my data. I don't fly in NFZ's and don't break the altitude rule. Line of Sight is another story. Maps are critical to me. I do fly a lot of WP's with Litchi but not with the Spark (yet). Thanks again for your help!
[2018-06-22 18:40:32]
quad808 :
@nocommie..love that, I will ask the powers that be on that one...
[2018-06-22 18:41:15]
nocommie :
Thats my point @kyokushin Instead of the SN, whatever you want. Instead of the actual home position, DJIs HQ in china
[2018-06-22 18:42:24]
kyokushin :
@nocommie, I have no that knowledge, probably by root and messing in code of wifi in android module - yes. However as far i know an android module from .300 have not aeroscope implemented. thats why i am still on .300 - i would like not anyone to know where i am standing when i am flying. I even do not need it, i am not doing something illegal, i am not paparazzi :slightly_smiling_face: but just i do not want to be tracked without my permission.
[2018-06-26 18:33:34]
mr.vibez :
I presume NLD can force FCC via the FW?
[2018-06-26 18:34:04]
mr.vibez :
for mavic pro
[2018-06-27 08:07:38]
cs2000 :
@mr.vibez theirs no way to force it via firmware a such. Simplistically, the app and the bird check their GPS goordinates (and other things) on startup and set the transmission power based on location. The NLD Go4 app forces this to set to FCC regardless of detected position
[2018-07-01 17:17:52]
glidepathuav.solution :
Morning gents! Is there any way to rollback firmware or upload modded firmware to this now nearly useless mavic air
[2018-07-01 18:03:25]
andrwho25 :
not if you’re on the latest @glidepathuav.solution
[2018-07-01 18:09:07]
glidepathuav.solution :
So in screwed or is there mods to fix the shitty video range
[2018-07-01 18:16:41]
bin4ry :
fcc through fake gps once and then stop fake gps and click cancel if the all asks you to switch back to ce
[2018-07-01 19:14:08]
glidepathuav.solution :
Gotcha...any specific app with iOS or android. Does this mean use a device that isnt connected to internet
[2018-07-01 19:14:34]
glidepathuav.solution :
Post the use of fake GPS app
[2018-07-01 19:22:57]
glidepathuav.solution :
Fcc activation on android only I assume. Thank you for that info # bin4ry.
[2018-07-01 19:29:15]
bin4ry :
only do it once and make sure your home point is not somewhere wrong! it is very dangerous to fuck with gps cords due to your home point. but it’s the only public way currently for you
[2018-07-01 23:35:56]
glidepathuav.solution :
So if I see channels under 2.4 ghz Its good .
[2018-07-01 23:36:23]
glidepathuav.solution :
Dji created a shitshow....again
[2018-07-01 23:41:52]
glidepathuav.solution :
11 channels under 2.4 ghz
[2018-07-01 23:57:41]
glidepathuav.solution :
I just bought a range extender antenna. I read that this will fix some but not all issues.
[2018-07-03 01:50:02]
glidepathuav.solution :
Wow! I get a whopping 100 feet of range
[2018-07-03 01:50:09]
glidepathuav.solution :
How does this happen
[2018-07-03 07:25:26]
ender :
Uhh that sounds like you damaged the RP-SMA connector while fastening the screw ?!
[2018-07-04 02:00:02]
glidepathuav.solution :
Rp-sma
[2018-07-04 02:01:21]
glidepathuav.solution :
This unit has has I'll range before and after modded anteannnas
[2018-07-04 02:08:28]
glidepathuav.solution :
I made the an effort to reach isolation from wifi. I have very little 5.8/2.4 according to my specrmtrun analyzer. However Dji go 4 says heavy inter ference and drops the video at 8 feet agl.
[2018-07-04 08:00:25]
cs2000 :
Near any large metal or re-enforced concrete structures? These can cause inteference too
[2018-07-06 03:40:43]
judah_lucifer :
Hi, can someone please spoonfeed me what I should do to bring out the most of Mavic Pro: like why would you root the aircraft? and how?
[2018-07-06 03:49:25]
jcarlo :
@judah_lucifer try reading first!wiki
[2018-07-06 07:32:12]
mathieu.peyrega :
!ddd
[2018-07-06 10:41:44]
validat0r :
so, for us spark users who dont know shit .. the fuzz about jcase's last release was because of this .0400 fw release for Mavic?
[2018-07-06 10:50:35]
cs2000 :
Correct :slightly_smiling_face: nothing changes for spark, all about Mavic .0400
[2018-07-10 02:36:56]
jabuasab :
what's the word with the FW for the MP that was just released?
[2018-07-10 09:11:50]
cs2000 :
@jabuasab the word is dont upgrade. Contains some ineffective fixes to our tools and not much else
[2018-07-10 10:45:57]
jabuasab :
@cs2000 what specific tools are they targeting
[2018-07-10 10:54:22]
mathieu.peyrega :
tools that allow to gain root access to the aircrafts / to do some mods etc.
[2018-07-10 11:03:46]
cs2000 :
pretty much
[2018-07-10 11:04:14]
cs2000 :
@jcase got round them in about 30 mins, but the slightly altered method isnt used in any of the nice GUI tools yet, so these will fail
[2018-07-12 02:25:44]
andrwho25 :
Does the 1.5W boost work for Mavic Air?
[2018-07-12 04:10:11]
ben_lin :
no
[2018-07-12 11:29:10]
validat0r :
@markusfriedl!apk
[2018-07-15 12:16:05]
erofeevas_slack :
Hello. Is it possible to patch 4.1.22, so informational messages about NFZ will still be there, but flight will be allowed anyway?
[2018-07-15 12:35:00]
aciid :
@erofeevas_slack that functionality is not restricted by the phone app
[2018-07-17 10:26:02]
pw73431 :
what is the best way to modify the flight parameters on a phantom 4? I have seen lots of information on using an old version of DJI Assistant 2 and enabling debug mode but unfortunately I am on the latest version of firmware so it is not compatible
[2018-07-17 10:27:19]
pw73431 :
is it still possible to use the dji-firmware-tools scripts to extract and modify the firmware or does this only work on older firmwares
[2018-07-17 10:27:59]
cs2000 :
@pw73431 what are you trying to achieve ?
[2018-07-17 10:30:10]
pw73431 :
would like to modify the max height limit and max speed of my P4
[2018-07-17 10:31:00]
cs2000 :
OK, so youd need to downgrade to V01.04.0602 or lower to mod both of those things
[2018-07-17 10:31:30]
cs2000 :
the latest firmware has locked the max height setting out and this cant be edited (not right now anyway)
[2018-07-17 10:32:16]
cs2000 :
You can easilly downgrade using DUMLDore by Jezzab from <https://github.com/jezzab/DUMLdore/releases/tag/v3.10> and firmware you can download from !DDD
[2018-07-17 10:32:56]
cs2000 :
then use the info youve already found/seen by getting Assistant 2 into debug mode and edit the parameters
[2018-07-17 10:33:35]
cs2000 :
Alternatively, go buy <http://www.nolimitdronez.com> and let it handle it all for you
[2018-07-17 10:33:50]
pw73431 :
cool thanks. very useful!
[2018-07-17 10:34:41]
pw73431 :
out of interest does the dji-firmware-tools scripts method to extract and modify the firmware method work on P4?
[2018-07-17 10:36:03]
cs2000 :
Not really dabbled with those particular tools, but id imagine the extraction and modification would work ok. The issue is getting it bundled back up properly and signed so the drone accepts it as a valid update package which i think is where that plan will fall down
[2018-07-17 10:36:44]
jezzab :
no
[2018-07-17 10:36:52]
cs2000 :
Those script (from what i know) are meant to make interrogation of the FW packages possible and dont yet have a way to re-sign into a valid update bundle
[2018-07-17 10:37:04]
pw73431 :
ah ok good to know
[2018-07-17 10:38:55]
pw73431 :
so there is no way of creating a valid upgrade bundle currently for the P4? Did they change the keys in the bootloader or something since they were all leaked?
[2018-07-17 10:39:06]
jezzab :
it is signed
[2018-07-17 10:39:12]
jezzab :
like mavic and everything else
[2018-07-17 10:39:31]
pw73431 :
ok shame!
[2018-07-17 10:42:20]
pw73431 :
does the root exploit still work on the P4?
[2018-07-17 10:42:33]
cs2000 :
i beleive so
[2018-07-17 10:44:05]
pw73431 :
nice, sorry for all the questions, but this sort of thing interests me so I like to experiment!
[2018-07-17 10:44:31]
cs2000 :
thats ok, you are in ~spoon-feeding and your questions show you have done at least some research, so its cool
[2018-07-17 10:44:54]
cs2000 :
This is basically why were all here lol
[2018-07-17 10:45:00]
aciid :
thats why a were all here to learn through making , theres tons of projects to focus into. latest being the parrot anafi
[2018-07-17 10:46:10]
pw73431 :
is it possible to brick a P4 or are they fairly robust/resilient?
[2018-07-17 10:48:48]
cs2000 :
only _really_ possible to brick it in 2 ways. First is removing the battery during a firmware flash, the other is using the module flashing utility in Assistant 2 as it does 0 checks on the package, just flashes it and thats that
[2018-07-17 10:49:09]
cs2000 :
Of course, thats before you start getting root access, then you can very quickly break things if you start meddling in the filesystem
[2018-07-17 10:50:00]
pw73431 :
ah cool. Thanks for the warnings will watch out for that them!
[2018-07-17 10:50:53]
aciid :
martinbogo a member here has bricked a P4, its stuck in recovery mode. flashing some leds. I dont know the current status of that problem is it solved already
[2018-07-17 10:53:03]
pw73431 :
must be some kind of JTAG on the aircraft I guess, unless they have disabled it. but then I guess you would need the firmware image in the correct format. so yeah probably screwed :disappointed:
[2018-07-17 10:54:21]
jezzab :
your sure u mean martinbogo? i know for a fact he can fix them at a VERY low level
[2018-07-17 10:56:28]
jezzab :
if that was a case it would have been a looooong time ago. and i assume your probably referencing a very old post on the dji forum
[2018-07-17 10:56:38]
aciid :
i found his post on the dji forum trying to get some dji's dev to answer the specifics
[2018-07-17 10:56:41]
aciid :
old post yes
[2018-07-17 10:56:49]
jezzab :
long fixed. says in the later posts
[2018-07-17 10:58:00]
jezzab :
dont type `reboot recovery` on the command line by mistake or paste in the terminal instead of slack chat :p
[2018-07-17 10:58:34]
aciid :
android command?
[2018-07-17 10:58:46]
jezzab :
in adb shell yes
[2018-07-17 10:59:06]
aciid :
was there a way out of there via pins?
[2018-07-17 10:59:20]
aciid :
or did it spawn some adb usb session once it booted?
[2018-07-17 10:59:31]
jezzab :
no it didnt
[2018-07-17 11:00:01]
jezzab :
a private exploit was used for that from memory
[2018-07-17 11:01:33]
jezzab :
bricked my MA for about 5 hours the other day (being silly) before i got it back. it wasnt good
[2018-07-17 11:02:17]
jezzab :
that does bring up adb shell in recovery. but it doesnt help alot. its not like you can just adb sideload
[2018-07-17 11:03:53]
jezzab :
oh well. fun and games
[2018-07-17 11:04:49]
aciid :
im trying to find a good replacement serial interface. ATEN USB dongle is bugging somehow wont work on any OS
[2018-07-17 11:06:22]
aciid :
<https://www.amazon.com/EZSync-RS485-USB-RS485-WE-compatible-EZSync010/dp/B010KJSCR8/ref=sr_1_6?s=pc&ie=UTF8&qid=1531825556&sr=1-6&refinements=p_72%3A1248879011%2Cp_36%3A1253504011>
[2018-07-17 11:06:43]
aciid :
like would this be any better than standard DB-9
[2018-07-18 09:42:02]
kiril.miloshev :
!apk
[2018-07-18 15:32:50]
fredz :
Amazing... I wanted to install an SD card in my Mavic Pro Platinum so I can change parameters...
[2018-07-18 15:33:00]
fredz :
I open the thing, and low and behold, it already HAS an SD card
[2018-07-18 15:33:13]
fredz :
Must say I ordered that MPP the day it was released straight from DJI
[2018-07-18 15:38:23]
fredz :
!DDD
[2018-07-21 02:33:38]
xchwaw :
where can I get the dji go 3 apk modded and no need to connect to internet,thanks!
[2018-07-21 03:25:25]
aciid :
DJI GO 4 started encrypted releases after 4.1.22 ( which is December 2017 releasee) so I assume DJI GO 3 unencrypted is around 3.1.23 November 2017 release
you could probably download it from apkmirror and decompile and give it a look, but I haven't heard that anyones modded that app yet. I don't have any compabitle drones for DJI GO 3 cant help there, but you could check the apkpatcher mods for DJI GO 4 and port some obvious ones
[2018-07-21 04:57:22]
anydreamplay :
!nld
[2018-07-21 05:02:43]
aciid :
NLDapp uses DJI GO 4
[2018-07-21 06:15:24]
xchwaw :
!nld
[2018-07-21 06:21:03]
xchwaw :
Thanks!I have connected my phantom 3a with dji go 3.1.3 and disconnected the internet,no logged in.Up to now,it looks fine.
[2018-07-21 06:22:03]
bin4ry :
we started modding it but removed the patches from github as they was reported non working and i don’t have any of the old drones. you can still find all patches in the git commit history if you want them they are for the go 3 version that is uploaded here : !apk
[2018-07-21 06:22:46]
aciid :
<https://github.com/Bin4ry/deejayeye-modder> this is the framework that patches most of the DJI GO 4 things
[2018-07-21 06:24:21]
bin4ry :
GitHub · Where software is built
<https://github.com/Bin4ry/deejayeye-modder/commit/6bbbcb1711586769420103c82207053af8c45989>
[2018-07-21 06:24:38]
bin4ry :
this are all go 3 patches
[2018-07-21 06:33:06]
xchwaw :
@bin4ry THANKS!I will try to compile a go3 with some of these patches.
[2018-07-22 03:27:13]
ki4gyw :
Fixing to have a M100, Should I treat the playing with the params as a inspire 1?
[2018-07-22 22:07:04]
adammajer :
Hi. I have problem after RC update to newest firware. Update bricked my Spark RC - no Wi-Fi broadcast. There is only solution to use DUMLdore or something else to reflash a firmware??
[2018-07-22 22:08:01]
validat0r :
Oh my .. .0600 is really messy?
[2018-07-22 22:08:26]
jezzab :
For a Spark RC:
DUMLdore
pyDUML
Go4 App
[2018-07-22 22:08:45]
validat0r :
Does downgrade with old dumldore work?
[2018-07-22 22:09:01]
adammajer :
How connect a controller tu dumldore??
[2018-07-22 22:09:18]
jezzab :
Wifi.
[2018-07-22 22:09:32]
jezzab :
Spark RC is only wifi update
[2018-07-22 22:09:39]
adammajer :
But there is no Wi-Fi signal :disappointed:
[2018-07-22 22:10:15]
jezzab :
@ilovemynexus4 it does. Assuming they didn't bump the anti rollback number
[2018-07-22 22:11:10]
adammajer :
<https://www.youtube.com/watch?v=zuxLY4_qShI> this is after update
[2018-07-22 22:11:22]
jezzab :
If they did I'm sure _you_ could root in and remove the offending file first
[2018-07-22 22:11:24]
validat0r :
Anti rollback number?
[2018-07-22 22:11:27]
adammajer :
No Wi-Fi, Led is flashing
[2018-07-22 22:11:53]
jezzab :
In the cfg.sig file. You cannot flash a number lower then your current
[2018-07-22 22:11:59]
validat0r :
It's antirollback="1"
[2018-07-22 22:12:14]
jezzab :
Should be fine
[2018-07-22 22:12:34]
jezzab :
If you were running a new version and say it was 2, you could not roll back to a 1
[2018-07-22 22:12:43]
jezzab :
That's the whole check system
[2018-07-22 22:12:58]
validat0r :
It's the same as in .0400
[2018-07-22 22:13:28]
jezzab :
The fix is deleting the cfg.sig file from the backup dir. That's how dumdore and everything does it
[2018-07-22 22:13:46]
validat0r :
But without WiFi ..
[2018-07-22 22:13:48]
adammajer :
Guys..there is any option to unbrick?? or not?? :
[2018-07-22 22:14:06]
jezzab :
No sorry. No wifi equals no flash
[2018-07-22 22:14:14]
adammajer :
:disappointed:
[2018-07-22 22:14:24]
validat0r :
Isn't there some way to reset the rc?
[2018-07-22 22:14:30]
validat0r :
Long press something?
[2018-07-22 22:14:49]
jezzab :
It can update from USB but it's iffy. I worked out how to unbrick this way for a friend, fixed it, then deliberately bricked my one to test again and now mines... toast. So I didnt get to fine tune the process
[2018-07-22 22:14:50]
adammajer :
yes, but now working
[2018-07-22 22:15:56]
validat0r :
This is becoming a popular issue
[2018-07-22 22:16:33]
jezzab :
seems to be atm
[2018-07-22 22:16:59]
adammajer :
I dont know what to do.. DJI have only one year of guaranty
[2018-07-22 22:17:27]
adammajer :
My spark is after guaranty one week
[2018-07-22 22:19:56]
aciid :
@adammajer if you live in Europe you can force private customer retail warranties
[2018-07-22 22:21:00]
aciid :
against ofcourse where you bought that thing from, since DJI doesn't even respect those
[2018-07-22 22:31:18]
adammajer :
Yes, I bought inside EU - Poland
[2018-07-22 22:34:00]
aciid :
@adammajer
<https://europa.eu/youreurope/citizens/consumers/shopping/guarantees-returns/index_en.htm>
Free of charge, 2-year guarantee (legal guarantee) for all goods
Under EU rules you always have the right to a minimum 2-year guarantee at no cost, regardless of whether you bought your goods online, in a shop or by mail order.
This 2-year guarantee is your minimum right. National rules in your country may give you extra protection: however, any deviation from EU rules must always be in the consumer's best interest.
If goods you bought anywhere in the EU turn out to be faulty or do not look or work as advertised, the seller must repair or replace them free of charge or give you a price reduction or a full refund.
As a general rule, you will only be able to ask for a partial or full refund when it is not possible to repair or replace the goods.
[2018-07-26 06:09:53]
trulala69 :
Hi, is there any way to display the flight path during the flight without an online or offline map just to get an idea where the drone is located?
Thanks
[2018-07-26 06:31:33]
mathieu.peyrega :
@trulala69 : attach a smoke device to your drone
[2018-07-26 06:33:12]
jezzab :
A red ribbon......
[2018-07-26 06:43:40]
trulala69 :
Smoke device would be an idea, just thinking of it makes me laugh... so not possible... I was asking, because I’m in Indonesia and don’t have any internet...
[2018-07-26 06:44:08]
jezzab :
offline maps??
[2018-07-26 06:45:47]
trulala69 :
Hmmm, connect the mobile to the hotel internet and then download the maps? Would be an idea...
[2018-07-26 06:45:57]
jezzab :
Yes
[2018-07-26 06:46:31]
jezzab :
Wait, if you have no internet... how are you on here? :thinking_face:
[2018-07-26 06:47:23]
jezzab :
makes me think of that photo of the worlds first camera
[2018-07-26 06:48:07]
trulala69 :
Caught me... IPhone has, but S6 hasn’t... But then I’ve to know where I’m flying before download, right? Or can I download whole Indonesia? I’ve to get into this...
[2018-07-26 06:48:37]
jezzab :
I dont know if you can where you are but usually yes, you have the option to down load an entire state or country etc (if available)
[2018-07-26 06:49:31]
trulala69 :
Hmmm, would have been nice just to see the flight track based on the GPS data without any map...
[2018-07-26 06:49:43]
trulala69 :
Thanks, mate!
[2018-07-26 06:50:06]
jezzab :
no probs. or plan b you could hot spot from the S6 to the iPhone :wink:
[2018-07-26 06:51:06]
trulala69 :
I’ll log it into a WiFi as soon as I find one... Any pointers to offline maps for a quick entry?
[2018-07-26 06:54:03]
trulala69 :
Got it ...
[2018-07-26 16:15:07]
kiril.miloshev :
!wiki
[2018-07-27 15:22:36]
fredmicrowave :
After searching for a while I cant find any info about this : On Mavic Pro, Is there a way to disable the stupid auto landing based on "calculated" battery range?
Calculation algorithm is really bad, as soon as you go a bit too far (or up), the auto land will kick in, with no way to disable it !
Returning home can be quite stressful, as the best you can do is just maintaining altitude by pushing throttle up, and plenty of battery remaining.
The manual says :
_ Low Battery RTH
The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that
may affect the safe return of the aircraft.[ ] **The user can cancel the RTH procedure by pressing the RTH button on the remote controller**
The thresholds for these warnings are automatically determined based on the aircraft’s current altitude and distance from
the Home Point.
The aircraft will land automatically if the current battery level can only support the aircraft long enough
to descend from its current altitude. **The user cannot cancel the auto landing** but can use the remote
controller to alter the aircraft’s orientation during the landing process. _
[2018-07-27 15:38:12]
nocommie :
Check the !wiki. I believe you have to change the battery type to non-dji or something. I know it is possible whatever way it is done.
[2018-07-27 16:41:44]
fredmicrowave :
Thank you. I could not find any reference,or any parameter related to that... But if i have to lose all battery info, I still prefer to let it on... Not being able to cancel auto-landing is a really crazy option from DJI, so involved in "security" ....
[2018-07-27 16:55:18]
nocommie :
Check the parameters section in the wiki. It may not need that to be changed to non-dji battery
[2018-07-27 18:02:18]
quad808 :
@fredmicrowave #to avoid battery failsafes for high flights:
Go into Parameters, Flight Setup page Battery Tab
change to Non-DJI Battery, 3S
Low Battery Warning - Level 1 Action: Led Indicator Warning Only
Critical Low Battery - Level 2 Action: Led Indicator Warning Only
Set Critical Battery Warning @ 3.50v or 10.50v
[2018-07-27 18:03:20]
quad808 :
This means...the quad will just sit there, wherever it is, so use this with extreme caution. Test first, so you know what it does and doesn't do
[2018-07-28 12:26:11]
fredmicrowave :
Sounds great, easy to change just for "special" flights. Thanks !
[2018-08-02 21:10:35]
will042082 :
@ilovemynexus4 How do I figure out what the values me for something? I have +[blah blah] I know the return type but I don’t know what the values represent for the retvalue. <blah: 0x1234567890>
[2018-08-02 21:10:45]
will042082 :
:upside_down_face:
[2018-08-02 21:12:55]
validat0r :
In what context?
[2018-08-02 21:15:09]
will042082 :
```*** entered -[DJIWifiLogic capability] ***
retval type: DJIWifiCapabilityCheckModel DJIWifiCapabilityCheckModel
retval value: <DJIWifiCapabilityCheckModel: 0x1d4200450>
*** exiting -[DJIWifiLogic capability] ***```
[2018-08-02 21:16:01]
will042082 :
I know 01 d4 20 04 50 mean 5 different parameters. But I don’t know how to translate/define what that is
[2018-08-02 21:17:08]
validat0r :
Is that related to your iOS Frida stuff?
[2018-08-02 21:18:08]
will042082 :
Yes. I know I’m missing something simple. But I’ve spent days and learned a lot it havnt figures out this piece
[2018-08-02 21:18:19]
validat0r :
Oh yes .. I muted that chan for a reason. Sorry, can't help
[2018-08-02 21:19:10]
will042082 :
Damn. Can’t or won’t lol
[2018-08-02 21:22:18]
validat0r :
My focus is on android ...haven't looked into iOS much.
[2018-08-02 21:24:16]
will042082 :
But generally speaking. How can I use IDA, to find out what those values mean
[2018-08-02 21:25:13]
aciid :
```
Convert IDA address to memory address and vice versa
function memAddress(memBase, idaBase, idaAddr) {
var offset = ptr(idaAddr).sub(idaBase);
var result = ptr(memBase).add(offset);
return result;
}
function idaAddress(memBase, idaBase, memAddr) {
var offset = ptr(memAddr).sub(memBase);
var result = ptr(idaBase).add(offset);
return result;
}
```
[2018-08-02 21:28:42]
will042082 :
Is that a script to run in ida?
[2018-08-02 21:29:28]
aciid :
i would figure that script helps you point memory addresses in frida to addresses in IDA data sections
[2018-08-02 21:29:49]
aciid :
in some occasions it helps to understand whats behind a memory address
[2018-08-03 01:45:17]
borillion_star :
so whats Mavic FC Loader, FlyCtrl_Loader
[2018-08-03 09:10:32]
aciid :
context?
[2018-08-03 18:20:30]
borillion_star :
in the firmware, guessing it means flight controller :smile:
[2018-08-03 18:45:46]
blak :
anyone know what firmware versions I can use pyduml to offline activate a new mavic pro?
[2018-08-03 18:48:37]
blak :
@apk
[2018-08-03 18:48:41]
blak :
!apk
[2018-08-03 18:52:39]
blak :
can you even do offline activation without windows dumldore?
[2018-08-03 19:01:58]
aciid :
@blak as far as I know all of the firmwares
[2018-08-03 19:02:12]
blak :
yeah seems so ive been doing reading all morning
[2018-08-03 19:02:24]
blak :
it looks like the windows dumldore is the only code that can do activation
[2018-08-03 19:02:33]
blak :
im all set up for firmware modding and stuff on linux is all
[2018-08-03 19:02:46]
blak :
so wanted to avoid having to install DJI shit in windows
[2018-08-03 19:13:12]
aciid :
virtualbox
[2018-08-03 19:13:40]
blak :
yeah i got a windows pc im settin up now w/ dji assistant etc
[2018-08-03 19:27:26]
blak :
nice this mavic had an older firmware so it should have the sdcard inside
[2018-08-03 19:38:52]
borillion_star :
thats awesome
[2018-08-03 20:11:16]
blak :
some kind of memory leak in the new DUMLdore Problem Signature 09: System.OutOfMemoryException
[2018-08-03 20:11:53]
blak :
happens after the mavic reboots itself during firmware updates
[2018-08-03 20:12:53]
blak :
fw downgrades are successful though
[2018-08-04 02:14:55]
borillion_star :
Ok so one thing I can't quite figure out, what is the clone for in deejayeye-modder?
[2018-08-04 02:21:59]
jezzab :
when you want to install a modded app alongside of a stock app. By changing the same `com.dji.go` `com.ijd.go` or what not
[2018-08-04 02:23:11]
borillion_star :
oh kk, not sure I would ever want that heh
[2018-08-04 03:08:18]
borillion_star :
@jezzab lol so cloning is needed to enable google maps api key, non-obvious to me
[2018-08-04 19:25:12]
ender :
Hmm, the MPP “iw reg get” definately remembers the current country. After my little stunf if i attach the MPP via ADB, no Anafi connected, no connection with the App, the MPP states “FR”.
[2018-08-04 19:25:44]
ender :
I hope If i could convince the MPP, the MPP could convince APP & Anafi to be in the US.
[2018-08-04 19:36:14]
ender :
okay, convinced MPP to be in US by editing “/data/lib/libshsettings/wifi.cfg to “US” default.
[2018-08-04 19:36:26]
ender :
rebooted MPP and Tadaaaa: MPP said iw reg get = US
[2018-08-04 19:36:40]
ender :
started anafi, anafi connected, THEN MPP swithcted to FR.
[2018-08-04 19:37:12]
ender :
DAMN. So Anafi probably has same default setting “FR”.
[2018-08-04 19:37:18]
ender :
AND Anafi overrules MPP
[2018-08-04 19:44:00]
t3rm1 :
what are you talking about? MPP = Mavic Pro Platinum
[2018-08-04 19:44:39]
ender :
damn i was on wrong channel, sorry guys ! Meant to be in ANAFI where MPP = Anafi controller
[2018-08-04 19:44:46]
ender :
SORRY
[2018-08-04 19:45:22]
t3rm1 :
tell them to search for another acronym :stuck_out_tongue:
[2018-08-04 19:50:57]
ender :
well the remote identifies itself as mpp when entering root shell…
[2018-08-04 22:10:14]
borillion_star :
get my replacement drone registered for the DJI care refresh insurance and start be getting root and permanent adb :slightly_smiling_face: ??
[2018-08-05 01:32:16]
borillion_star :
Better question is are they really anal about software mods?
[2018-08-05 01:32:48]
borillion_star :
In US I don't think they can void warranties for that. They would have to prove the software caused damage.
[2018-08-05 01:33:56]
borillion_star :
Even warranty void if removed stickers are technically non-binding.
[2018-08-05 02:07:48]
aciid :
did you send you drone to repairs with firmware hacked?
[2018-08-05 04:12:48]
borillion_star :
nope, I have not sent any drones in
[2018-08-05 04:14:00]
borillion_star :
Amazon made me return the other and shipped me replacement rather than just send me a new battery
[2018-08-05 04:15:09]
borillion_star :
fought them over that and their shit packaging for shipping :confused: for being a prime member I don't get much benefit or care
[2018-08-05 04:44:30]
borillion_star :
Uhh, bad idea don't launch from on top of a car. It did not like that at all
[2018-08-05 04:44:39]
borillion_star :
:stuck_out_tongue:
[2018-08-05 22:20:34]
beers :
Hey guys. Getting a "cannot take off" error. First time with my drone... I activated it? I think?
[2018-08-05 22:20:41]
beers :
Have GPS lock
[2018-08-05 22:20:54]
beers :
am getting a "sd card error, contact DJI if error continues"
[2018-08-05 22:21:07]
beers :
I did "sd card format" but that didn't change the error...
[2018-08-05 22:21:16]
jezzab :
Sound like you downgraded the firmware
[2018-08-05 22:21:29]
jezzab :
And yours is a newer Mavic Pro and Platinum
[2018-08-05 22:21:36]
beers :
Yes I'm on .700 i believe
[2018-08-05 22:21:49]
beers :
its.. 8 months old at least?
[2018-08-05 22:21:55]
beers :
I was away
[2018-08-05 22:22:04]
beers :
And never got to open it / use it yet
[2018-08-05 22:22:19]
jezzab :
check the serial:
<http://tools.retroroms.info/>
[2018-08-05 22:22:46]
jezzab :
<https://dji.retroroms.info/howto/recorder-sdcard-fix>
[2018-08-05 22:23:08]
beers :
Model: Mavic Pro, build on: 14. October 2017
[2018-08-05 22:23:27]
beers :
Thanks Jezzab. Would that error prevent me from take off?
[2018-08-05 22:23:33]
jezzab :
Sure would
[2018-08-05 22:23:51]
jezzab :
Read that wiki page
[2018-08-05 22:23:58]
beers :
Thank you my friend, I appreciate it.
[2018-08-05 22:24:04]
beers :
Reading now
[2018-08-05 22:25:21]
beers :
Those a-holes at DJI....
[2018-08-05 22:26:53]
jezzab :
!dji
[2018-08-06 11:42:49]
adam :
I asked this on the forums and didn't really get any useful responses - Is there a recommended firmware version where helpful upgrades outnumber annoying limitations?
I'm still on 01.03.0400 because it's what came on mine and at the time people were bitching about problems with the newer versions.
[2018-08-06 11:44:36]
aciid :
@adam concensus is that 01.03.0700 is the last firmware that you can remove pretty much any limit without getting too familiar with reverseengineering yourself
[2018-08-06 11:45:18]
aciid :
there is an app called NLDapp that can do most of that work for you , but if you'd rather do it yourslef. there is !wiki
[2018-08-06 11:48:04]
adam :
Thanks. Is there any collected list of which limits are firmware imposed and which are DJI-Go App imposed? I started looking into this when I could not take off due to geolock near an airport that I had permission to fly at.
[2018-08-06 11:51:57]
adam :
i'm guessing the release notes on that wiki, will do some reading!
[2018-08-06 11:57:47]
aciid :
<https://nolimitdronez.com/birdmap>
[2018-08-06 12:05:06]
adam :
Perfect, thanks. I'm just starting to read up on all of this, is there a spot where all of the column headers are explained? Some are obvious, but I'm not really sure what others entail.
[2018-08-06 12:06:36]
cs2000 :
@adam which ones are you struggling with? Theyre pretty self explanatory
[2018-08-06 12:10:23]
adam :
I just don't know what the options are yet, so I can only guess that each column is what you are able to do:
NFZ - remove NFZ restrictions
ALT+500 - increase max altitude
Sport+ - faster sport mode?
Normal+ - faster normal mode?
Downgradable - obvious
FCC NLD Go - force FCC mode
[2018-08-06 12:12:16]
cs2000 :
All correct. The FCC NLD Go one essentially means that you can enable FCC transmission power on that firmware, however its a setting controlled by the app, so you either need to use the built in APK patcher in NLD, or Bin4ry's APK patcher as discussed in ~android_apk_patching to create your own APK with FCC mode enabled too
[2018-08-06 12:15:31]
adam :
:thumbsup: So do I gain anything by upgrading to V01.03.0700 from V01.03.0400? I will be doing a lot of reading on this the next day or two as time allows and will save other questions for after I RTFM. Looks like a great solution for all of the DJI imposed problems I've been having.
[2018-08-06 12:16:53]
cs2000 :
Personally, if .400 is working for you, stay there. 700 is just seen as the "newest" firmware you can be on that doesnt have limitations removed
[2018-08-06 12:19:02]
adam :
I have some issues from time to time, but no way to tell if they are FW or GO related. I suspect the latter. I was mostly curious if there were any modes/features only available on later FW revisions that made it worth while.
[2018-08-06 12:19:52]
cs2000 :
take a look at the change logs, that will tell you about new features
[2018-08-06 12:20:43]
cs2000 :
.0700
What’s New?
• Added support for DJI Goggles
• Optimized gimbal self checking.
.0600
What’s New?
• Added Fixed-Wing mode. For details about Fixed-Wing mode, please refer to the Intelligent Flight Mode section in user manual v1.6.
• Added an option to turn off the remote controller low battery level warning. When battery level is less than 15%, just press the power button on the remote controller to turn off the warning.
• Optimized Dual Remote Controller Mode. (Requires DJI GO 4 iOS v4.0.5 or later or Android v4.0.5 or later)
• Optimized No-Fly Zone Return to Home and unlocking function.
• Improved playback performance.
• Improved default colors for DNG files.
• Optimized gimbal auto-calibration.
[2018-08-06 12:20:52]
cs2000 :
so thats what youll gain by upgrading to .0700
[2018-08-06 12:24:57]
adam :
eh maybe fixed wing and goggles if I ever get a pair. Thanks. I have a bunch more questions, but I'll read first and probably get most of them answered that way.
[2018-08-06 16:23:24]
ransudz :
Hey I have a question that I couldn’t find an answer to. So my mavic pro is on the latest firmware and according to the change logs I can’t downgrade it. I was wondering if the go apps upgrade with the drone firmware. Is it possible for me to use a modded go app such as 4.1.15 with the newest drone firmware?
[2018-08-06 18:03:42]
quad808 :
@ransudz I don't see why not. If I were you, I would use DJI Assistant, or DD and downgrade to 01.04.0300 ASAP.
[2018-08-06 19:23:05]
ransudz :
I am under the impression that you cannot roll back this firmware through the official tools (DJI assistant) due to the patch notes.
[2018-08-06 19:32:06]
ransudz :
Also have another question about the fcc hack. Assuming I am located in the US then there is no way the increase the transmission power through modding right?
[2018-08-06 19:34:39]
nocommie :
There are some people that have boosted the output past the FCC limit. Not sure what actual power they are getting but some have mentioned if you go too high it can cause overheating etc.
[2018-08-06 20:06:48]
validat0r :
@shacharmilo.
[2018-08-06 20:09:59]
validat0r :
@shacharmilo so if you flip to sport mode and go down full throttle it's what? 5 m/s?
[2018-08-06 20:11:32]
007 :
10 m/s
[2018-08-06 20:11:53]
007 :
Its about 35 km/h
[2018-08-06 20:12:55]
validat0r :
sounds right ..
[2018-08-06 20:13:16]
validat0r :
how fast do you want to go? 10 m/s is max
[2018-08-06 20:13:25]
007 :
Its seems that i have an issue just with the speed. The nfz and altitude they ok.
[2018-08-06 20:13:29]
myke218 :
I haven't been in here in a couple years. Is it now possible to truly lift the NFZ restriction on a Spark using iOS?
[2018-08-06 20:13:32]
validat0r :
if you want to go faster, you have to shut off the props .. then you get 18
[2018-08-06 20:14:25]
mathieu.peyrega :
need a few other tweaks before shutting down props in flight :slightly_smiling_face:
[2018-08-06 20:14:38]
validat0r :
so I heard
[2018-08-06 20:14:43]
007 :
The up and down speed ok the forward and the revers slowly
[2018-08-06 20:14:45]
mathieu.peyrega :
but right, Spark free fall terminal velocity is around 18 m/s
[2018-08-06 20:15:23]
validat0r :
as I said in ~general: and forward and reverse is governed by g_config_mode_normal_cfg_tilt_atti_range and g_config_mode_sport_cfg_tilt_atti_range
as max values you should pick values like 40-50
thats not m/s but attack angle in degrees
[2018-08-06 20:16:20]
007 :
The engle is on 60 degrees
[2018-08-06 20:17:02]
validat0r :
that's steep
[2018-08-06 20:17:18]
007 :
And he fly perfect not with the speed that i get before, 80-90 km/h
[2018-08-06 20:17:28]
validat0r :
and the max value .. depending on wind speed and direction you should get around 17-20 m/s
[2018-08-06 20:17:50]
validat0r :
80-90 i don't quite believe
[2018-08-06 20:17:56]
mathieu.peyrega :
lol
[2018-08-06 20:18:14]
validat0r :
that's 25 m/s .. never saw that
[2018-08-06 20:18:26]
validat0r :
but then, I didn't have angle set to 60 ..
[2018-08-06 20:18:26]
mathieu.peyrega :
maybe on a windy day...
[2018-08-06 20:19:03]
007 :
With wind of 25 km/h we get 102.3 km/h
[2018-08-06 20:19:13]
validat0r :
with spark?
[2018-08-06 20:19:19]
007 :
Sure
[2018-08-06 20:19:23]
validat0r :
28 m/s?
[2018-08-06 20:19:38]
validat0r :
nice
[2018-08-06 20:20:06]
validat0r :
anyway .. if you're beef is with nld, you should go to ~nld and talk to the guys
[2018-08-06 20:20:07]
007 :
Yes, Believe me
[2018-08-06 20:20:27]
validat0r :
you can also check <https://dji.retroroms.info/howto/parameterhacks> to check the settings yourself
[2018-08-06 20:21:27]
007 :
Ok, i will.
Thanks 2 u
[2018-08-06 20:21:52]
validat0r :
spark is quite sensitive to wind .. if you get only like 14 m/s out of it with 60° angle, just check the other direction.
[2018-08-06 20:22:00]
mathieu.peyrega :
technicaly, going from 45° to 60° should provide 41% extra speed if the drone can sustain leveled flight...
[2018-08-06 20:22:21]
validat0r :
or maybe your props are bad ..
[2018-08-06 20:22:36]
validat0r :
or worse
[2018-08-06 20:23:29]
mathieu.peyrega :
( cos(45°) / cos(60°) ) "lift/vertical hrust compoenent" is same, but the horizontal thrust component would get larger by that factor
[2018-08-06 20:24:14]
007 :
Thank guys
[2018-08-06 20:24:39]
validat0r :
try ~ios_ipa_reversing
[2018-08-06 20:29:36]
quad808 :
Before we go blaming NLD....flash to STOCK, see what you get, then tweak and see what you get. I am sure no one from NLD told you to upgrade your firmware...'cause that would be me or cs2000
[2018-08-06 20:43:36]
validat0r :
I think he did flash stock 1000/600
[2018-08-06 20:44:39]
validat0r :
ah no .. he said something about mod mixing .. right
[2018-08-07 17:09:58]
marvinstuart :
hey where can i find 4.1.22_V3028592-nosecneo apk
[2018-08-07 17:17:33]
c.binetti :
!apk
[2018-08-07 18:05:48]
marvinstuart :
perfect
[2018-08-08 14:03:49]
007 :
Hi.
About my issue, that the message that i am get after the update 1000&600 on my spark, you know somthing about that ?
[2018-08-08 14:10:17]
validat0r :
did you look in the settings?
[2018-08-08 14:19:26]
007 :
something about "controller setting"?
[2018-08-08 14:22:50]
validat0r :
but no, i haven't seen this msg
[2018-08-08 14:23:25]
validat0r :
what kind ramifications does this msg have?
[2018-08-08 14:46:49]
007 :
Sorry i didn't a
Understand your question ?
But i downgrat the ac to 600 the rc remain on 600 and know it looks ok, fly fast as it was before, i will try to downgrate to the 300 version and then returne to the 1000 ?
[2018-08-08 15:20:59]
validat0r :
are you gonna mix mod again when going to 1000?
[2018-08-08 16:03:55]
007 :
Yes, now i mix the 300 and then the new 1000 without the 305/306/905, the spark fly normally with the high speed.
Works with the fcc.
Didn't try yet the otg.
Thanks for everthing.
[2018-08-08 17:23:06]
validat0r :
ok
[2018-08-08 17:23:49]
validat0r :
I always use OTG .. but then DJI GO 4.1.14 or 4.1.15 is recommended
[2018-08-08 17:23:58]
validat0r :
.22 doesnt work so well with OTG
[2018-08-08 18:20:08]
007 :
Ok, tnx.
[2018-08-08 19:43:32]
007 :
With the 4.1.15 you put your phone on Flying plane ?
[2018-08-09 05:37:41]
007 :
I meant to Flight Mode ? Or regular
[2018-08-10 04:41:18]
borillion_star :
so DUMLRacer before DUMLdore?
[2018-08-10 04:45:40]
jezzab :
If your using DUMLdore v3.10 you dont need DUMLracer. Has a temp instant root button and can roll back
[2018-08-10 05:32:55]
borillion_star :
ok so V01.03.0700 is just seen as the "newest" firmware you can be on that doesnt have limitations removed, what limitations are we talking about?
[2018-08-10 05:39:51]
markusfriedl :
@borillion_star I'm flying with 04.0300 and have no limitations either... just downgrade to 03.0700 and then upgrade to the desired version with modulemix... after that you can also remove the nfz via dumldore and adb access and adapt your parameters with DJI Assistant (I use 2.11.2....) in debug mode
[2018-08-10 05:41:09]
borillion_star :
so this one already has 01.03.0700 stock
[2018-08-10 05:42:03]
markusfriedl :
perfect... so you just have to use modulemix to upgrade to a newer version and still can adapt the flight parameters
[2018-08-10 05:42:16]
borillion_star :
what are limitations that are enabled on newer firmware's is I guess is what I am asking.
[2018-08-10 05:43:25]
markusfriedl :
<http://freier-fliegen.de/birdmap/> gives you a good overview
[2018-08-10 05:45:24]
borillion_star :
"prevent parameter changes in some of their recent firmware"
[2018-08-10 05:45:28]
borillion_star :
goootttt it :smile:
[2018-08-10 05:48:46]
markusfriedl :
:+1:
[2018-08-10 21:50:34]
will042082 :
@jezzab @czokie looking over the PrettyWoman shell script info, is that hard coded to configure those specific objects? Or can I alter the ProductCode and shell script and it would generate different objects based on it?
[2018-08-10 22:59:34]
will042082 :
@mathieu.peyrega question for ya. I have tilt at 50-55 testing different configurations on my AIR. When I’m full acceleration the gimbal tilts way down presumably due to the tilt angle and wanting to avoid hitting the top. However it tilts way to much and even after slowing down or even a complete stop it remains at that angle and I have to auto center to bring it back level. Any idea which param controls that?
[2018-08-11 22:24:09]
erofeevas_slack :
Hello. I have faulted battery on my mavic. One cell has slightly lower voltage level than two others. I've tried 3 charge\discharge cycles, but no effect. Is there some way to fix it?
[2018-08-11 22:30:19]
validat0r :
Flight Mode
[2018-08-11 22:47:47]
will042082 :
what's gimbal auto pitch? Im testing and can't tell 0/1, 0 default
[2018-08-11 22:48:26]
will042082 :
"DEFAULT": 0,
"MAX": 1,
"MIN": 0,
"NAME": "auto_gimbal_pitch",
"RAW_NAME": "auto_gimbal_pitch",
"TYPE": "uint8_t",
"VALUE": "0"
[2018-08-11 22:48:56]
will042082 :
while I'm asking, also
[2018-08-11 22:48:56]
will042082 :
"DEFAULT": -5,
"MAX": 45,
"MIN": -10,
"NAME": "gimbal_tilt_max",
"RAW_NAME": "gimbal_tilt_max",
"TYPE": "float",
"VALUE": "-5"
[2018-08-12 05:47:17]
lolo780 :
Isn't that where the gimbal auto levels before landing?
[2018-08-12 06:07:47]
will042082 :
I know the mavic has g config landing ctrl gimbal pitch to horiz enable which auto levels it on landing
[2018-08-12 06:08:17]
will042082 :
I’ll check that out tomorrow. Been looking for the air equivalent and didn’t think to see if that was it. Stoked if it is
[2018-08-12 06:13:02]
will042082 :
found this guy too: g_config_misc_cfg_gimbal_priority_en when enabled it ensures your gimbal stays level. this param goes with it (I THINK) gimbal_priority_flight_tilt. It goes 20-60 and I need to test some more to see how it works.
[2018-08-12 10:18:45]
007 :
Hi guys.
There is some way in spark, to change the gimbal on sport mod to 90 degress as in the normal mod ? It's somethind about 85 degress in the sport mod.
[2018-08-12 14:53:44]
aciid :
@shacharmilo like FPV?
[2018-08-12 14:55:04]
007 :
yes
[2018-08-12 14:58:50]
007 :
[2018-08-12 15:08:53]
aciid :
i'd start by testing first is the camera physically able to move to that radian
[2018-08-12 15:32:31]
will042082 :
What do you mean by sport mode to 90 degrees?
[2018-08-12 15:45:12]
007 :
When i fly the spark on sport mod the camera can't change here angle down to 90 degress
[2018-08-12 15:45:48]
007 :
Degrees
[2018-08-13 08:32:27]
1313659 :
How to modify Dji_verify, I can refresh the modified 306 firmware module.
[2018-08-13 08:58:02]
1313659 :
[2018-08-13 09:00:45]
mefisto :
I would start here:
<https://www.youtube.com/watch?v=3NTXFUxcKPc>
[2018-08-13 09:06:49]
1313659 :
Never been exposed to decompilation, it is too difficult for me.
[2018-08-13 09:14:07]
aciid :
thats what the university is for
[2018-08-13 09:17:29]
1313659 :
:sob:
[2018-08-13 16:52:00]
borillion_star :
@aciid did you learn to decompile at university? :stuck_out_tongue:
[2018-08-13 16:52:16]
aciid :
no, I have not enrolled in university
[2018-08-13 16:55:29]
borillion_star :
kk
[2018-08-13 17:40:23]
t3rm1 :
lol i watched the video. who seriously debugs with radare
[2018-08-13 17:45:31]
aciid :
people who want better plugins
[2018-08-13 17:45:35]
aciid :
IDA is messy
[2018-08-14 06:02:05]
1313659 :
This error occurs, how to modify the file can be read and written
[2018-08-14 06:05:17]
1313659 :
Why this command cannot modify attributes for sbin directory
[2018-08-14 06:06:54]
1313659 :
[2018-08-14 06:37:43]
blak :
mount -o remount,rw /
[2018-08-14 06:37:58]
blak :
@1313659
[2018-08-14 06:40:47]
1313659 :
@blak
I have tried this or not.
[2018-08-14 06:41:46]
1313659 :
mount -o remount,rw /amt is ok, But mount -o remount,rw /sbin is not.
[2018-08-14 06:41:53]
blak :
/sbin isn't a mountpoint
[2018-08-14 06:41:55]
blak :
/ is
[2018-08-14 06:42:12]
blak :
run 'mount'
[2018-08-14 06:42:15]
blak :
to see all mounted filesystems
[2018-08-14 06:45:28]
1313659 :
[2018-08-14 06:47:44]
blak :
still haven't tried /
[2018-08-14 06:48:53]
1313659 :
[2018-08-14 06:50:00]
blak :
yes you can see there is no /sbin mountpoint
[2018-08-14 06:50:17]
blak :
it's a subdirectory under /
[2018-08-14 06:50:19]
1313659 :
Files in the system directory can be modified, but not in the sbin directory.
[2018-08-14 06:50:52]
blak :
because you need to mount -o remount,rw /
[2018-08-14 06:51:01]
blak :
so the filesystem has write permission
[2018-08-14 06:53:49]
1313659 :
Why do I mount -o remount, rw / no success
[2018-08-14 06:57:40]
1313659 :
How can I copy files to replace files in the bin/ directory.
[2018-08-14 08:54:42]
jezzab :
I would be thinking very carefully about what you are trying to do. For a start, sbin is built on boot.
Also dji_verify is called on bootup, if you screw that up, you may halt the boot process, but im sure you checked dji_verify is called after adb and usb etc so you can get back in if it all goes wrong....
[2018-08-14 08:58:00]
good.win.alexs :
i suppose, there is no way to use any kind of recovery? headless board with android… nightmare
[2018-08-14 08:58:13]
jezzab :
not to mention if you are running a fw version with a system.md5 file
[2018-08-14 08:58:16]
jezzab :
yup
[2018-08-14 08:58:28]
jezzab :
sometimes your lucky, sometimes your not
[2018-08-14 08:58:48]
jezzab :
sometimes its stuck in recovery just doing an update
[2018-08-14 08:59:07]
cs2000 :
sometimes its stuck in your drawer playing mario on loop @jezzab
[2018-08-14 08:59:30]
jezzab :
never mention mario music again lol
[2018-08-14 08:59:52]
jezzab :
and it was eventually in the fridge so it didnt cook (and it was quiet)
[2018-08-14 11:48:46]
1313659 :
@jezzab I want to flash the unsigned firmware module to the aircraft.
[2018-08-14 11:55:19]
1313659 :
If close dji_verify to verify the firmware module, I want can flash the firmware to the aircraft.
[2018-08-14 11:58:56]
jezzab :
I know what your trying to do, im just saying be very careful
[2018-08-14 13:42:09]
aciid :
told him that too, hopefuly he finds what he is wanting to do with that. I don't have any idea where he is going with that.
[2018-08-14 13:42:23]
aciid :
when almost anything is possible people get greedy with settings
[2018-08-14 14:11:33]
1313659 :
I hope my Mavic air can fly 50 meters at school ，Because my school in NFZ.
[2018-08-14 14:13:05]
validat0r :
perhaps it's smarter not to fly over the heads of your fellow students.
[2018-08-14 15:13:07]
1313659 :
:wink:
[2018-08-14 15:20:16]
1313659 :
I think my mavic will soon turn into a brick. We have a DJI club here, and we often do this.
[2018-08-14 15:37:32]
validat0r :
So it's a bricking club? Sounds expensive.
[2018-08-14 18:49:46]
quad808 :
"Come join our club! Bring your DJI Drones! You bring, We brick, No Problem!"
[2018-08-14 20:34:56]
ender :
Well i refrained from those comments but OF COURSE validat0r and quad filled the gap :wink:
[2018-08-14 20:37:59]
validat0r :
you're a saint
[2018-08-14 22:34:09]
blak :
hehe
[2018-08-15 12:51:16]
good.win.alexs :
so @1313659, how it’s going? Did you break it already :slightly_smiling_face:
[2018-08-16 11:54:23]
1313659 :
The mission failed because I could never find a place to close or skip validation.
[2018-08-17 09:29:43]
dump_slack :
hello, how do you get the `nosecneo` apk mentionned on github?
[2018-08-17 09:29:49]
dump_slack :
(for DJI GO)
[2018-08-17 09:29:59]
cs2000 :
!apk
[2018-08-17 09:30:02]
cs2000 :
magic :wink:
[2018-08-17 09:30:06]
dump_slack :
indeed, that is magic
[2018-08-17 09:30:07]
dump_slack :
thx
[2018-08-17 09:50:24]
dump_slack :
do you know if theres a version that supports the mavic air?
[2018-08-17 09:50:36]
cs2000 :
There isnt sadly
[2018-08-17 09:50:57]
dump_slack :
i wonder how hard is it to do
[2018-08-17 09:51:04]
cs2000 :
very!
[2018-08-17 09:51:07]
dump_slack :
im a bit scared of forgetting to patch something and dji noticing
[2018-08-17 09:51:26]
dump_slack :
(i know how to patch smali stuff in general that is, if thats the hard part)
[2018-08-17 09:51:38]
dump_slack :
(but i guess its not)
[2018-08-17 09:51:57]
cs2000 :
The apps are protected by SECNEO, we have had two of the best people around @diff and @bin4ry working on this for months. Progress has been made, but no patched APK released
[2018-08-17 09:52:12]
dump_slack :
haa
[2018-08-17 09:52:35]
dump_slack :
that makes sense
[2018-08-17 09:54:01]
dump_slack :
while im bothering you, do you know if theres any paper that indicates what secneo does? (not the stuff on their website ;-)
[2018-08-17 09:54:17]
dump_slack :
i suspect they already protect from the classic ways to bypass that kind of stuff
[2018-08-17 09:54:33]
dump_slack :
like just gcore'ing the process lol
[2018-08-17 09:59:30]
cs2000 :
Not sure personally, @bin4ry?
[2018-08-17 10:21:52]
good.win.alexs :
@kang secneo is protection mechanism with different layers of security
[2018-08-17 10:22:28]
good.win.alexs :
one of them - there is no freely available dex of original app - it is split into peaces, ecrypted and loaded into memory when is needed by SecNeo
[2018-08-17 10:23:06]
good.win.alexs :
also, secneo provides a lot of anti-debug mechanisms to prevent any leak of dex from memory - you are not able to connect with debugger and dump decrypted dex from memory :slightly_smiling_face:
[2018-08-17 10:23:22]
good.win.alexs :
and it is detecting Emu - so no way with emulator…
[2018-08-17 10:23:43]
good.win.alexs :
this is just short explanation, enterprise version of secneo is real hell
[2018-08-17 10:24:21]
good.win.alexs :
btw, did anybody try to fool secneo with modified dalvik/libart?
[2018-08-17 10:24:46]
good.win.alexs :
is there any way to break protection from side of runtime vm?
[2018-08-17 11:20:41]
validat0r :
yes, there is stuff. i found some talk in the <https://media.ccc.de/> archive
[2018-08-17 14:13:01]
dump_slack :
sounds like denuvo hehe
[2018-08-17 14:30:34]
good.win.alexs :
yeah, android version of denuvo )))
[2018-08-17 18:02:00]
t3rm1 :
denuvo was cracked though
[2018-08-17 18:02:19]
t3rm1 :
too bad the police caught the person who made it happen
[2018-08-19 15:13:50]
neelix.one :
!apk
[2018-08-20 15:19:19]
andrwho25 :
What version of DJI go can I use with my mavic air without the BS ? Accidentally upward all my apps on my iPhone
[2018-08-20 15:21:06]
cs2000 :
Pretty much stuck with DJI's latest and greatest
[2018-08-20 15:21:31]
cs2000 :
none of the patches apps we have work with the air, the app needs to be a certain version to detect the air and all of our patched ones are older
[2018-08-20 15:23:07]
andrwho25 :
Ah I mean if I could install a previous one. Do versions of the app have any adverse affect on the RC ? Like it won't force me to update my firmware ?
[2018-08-20 15:23:57]
cs2000 :
They all force updates sadly (apart from our patched ones)
[2018-08-20 15:24:20]
cs2000 :
With the air, you pretty much have to be on the latest app
[2018-08-20 15:28:23]
andrwho25 :
Damn it
[2018-08-20 15:28:51]
andrwho25 :
Even RC firmware ? So I can't keep my .300?
[2018-08-20 15:30:31]
cs2000 :
If the app forces you to update, not a lot you can do unless you can skip it, or always fly in aeroplane mode i guess
[2018-08-20 17:43:28]
faddyfareed :
Guys, Thanks for the awesome guides, I modded my FW.700 on my mavic pro with root and removed nfz and 905. I also made sure that the parameters for nfz are modified. Now it gives me "Can't Take Off" without a reason. I tried modding multiple apk versions from 4.1.3, 4.1.14/15 and 4.1.22 but got nothing. Does anyone has an idea on how to fix that. Thanks in adv.
[2018-08-20 17:51:25]
faddyfareed :
My guess is there is some kind of a lock mechanism that detects when you modify files on .700..
[2018-08-20 17:56:45]
faddyfareed :
when i try to take off it simple say "take off failed"
[2018-08-20 18:32:24]
nikogpsy :
It seems that when you root and remove nfz and 905 causes this issue when on 700.
[2018-08-20 18:36:22]
quad808 :
Nope, not true. You can mod .0700, remove 905, remove backup 905 and be just fine. @faddyfareed is this a new Mavic? Did you install an internal memory card?
[2018-08-20 18:37:20]
quad808 :
.0800 is when DJI started the major f'ing around
[2018-08-20 18:37:29]
faddyfareed :
yes it is new and I have been trying to patch it for 2 days with no luck.. idk whats going on.. I did root and removed 905
[2018-08-20 18:37:52]
faddyfareed :
what do you mean internal SD card? it has external SD if that what you mean
[2018-08-20 18:39:03]
quad808 :
If I was talking about the external memory card, I would have said that. Not that one. In order to run firmware earlier than 01.04.0100, you need an internal memory card, so that means you need to get your hands dirty and open up the bird.
[2018-08-20 18:39:16]
faddyfareed :
Oh
[2018-08-20 18:39:27]
faddyfareed :
Sorry didn't knew about it
[2018-08-20 18:39:52]
quad808 :
<http://dji.retroroms.info/howto/recorder-sdcard-fix>
[2018-08-20 18:39:58]
faddyfareed :
I have no problem with opening it, Ive done that before with P4P
[2018-08-20 18:40:07]
borillion_star :
@quad808 assuming that a drone with 01.03.0700 factory would have an internal blackbox sdcard?
[2018-08-20 18:40:09]
faddyfareed :
Thanks mate
[2018-08-20 18:40:52]
quad808 :
np. @borillion_star yes, they removed the cards from about sept. 2017 on
[2018-08-20 18:41:09]
faddyfareed :
@quad808 it seems a simple disassembly from your link
[2018-08-20 18:41:15]
faddyfareed :
no desoldering or anything
[2018-08-20 18:41:16]
quad808 :
yes, very easy
[2018-08-20 18:41:23]
faddyfareed :
MAN THANKS a LOT
[2018-08-20 18:41:32]
quad808 :
I need to find another video link, hang on
[2018-08-20 18:41:50]
borillion_star :
is there a way to check without dissecting lol?
[2018-08-20 18:42:22]
quad808 :
<https://www.youtube.com/watch?v=H_RhqHHli7Q> digdat0 makes ultimate videos, great guy
[2018-08-20 18:42:27]
faddyfareed :
nice
[2018-08-20 18:42:54]
quad808 :
If you downgrade to below 01.04.0100 and can take off, you have a card...lol
[2018-08-20 18:43:24]
faddyfareed :
Btw is it the same reason when I tried the "4.100 nfz patch with stage2.bin thing" failed in the end?
[2018-08-20 18:43:59]
quad808 :
flight records are written to it in early firmware, after that, they went to on board memory
[2018-08-20 18:44:22]
quad808 :
how do you know it failed? Did you get a failed message?
[2018-08-20 18:44:46]
quad808 :
NLD, I presume you are talking about?
[2018-08-20 18:44:57]
faddyfareed :
well i tried NLD too lol
[2018-08-20 18:45:00]
faddyfareed :
same result
[2018-08-20 18:45:12]
faddyfareed :
and i just noticed it says sd card error
[2018-08-20 18:46:17]
borillion_star :
Thanks
[2018-08-20 18:46:22]
faddyfareed :
oh the stage2.bin method .. was hanging in the end of Defeating antirollback STAGE2 in dumldore
[2018-08-20 18:47:12]
faddyfareed :
well i kinda prefer the rooting method and removing files and using patched apks
[2018-08-20 18:48:22]
good.win.alexs :
Do you have sd?
[2018-08-20 18:48:35]
good.win.alexs :
I mean, internal
[2018-08-20 18:48:46]
good.win.alexs :
That 4Gb bastard
[2018-08-20 18:49:01]
faddyfareed :
yes apparently i am in the process of opening it up lol
[2018-08-20 18:49:12]
good.win.alexs :
You have to if you want to use .700
[2018-08-20 18:49:30]
faddyfareed :
why nobody mentions the internal sd on the guides online..
[2018-08-20 18:49:35]
faddyfareed :
:rolling_on_the_floor_laughing:
[2018-08-20 18:58:20]
andrwho25 :
How awesome is the modded mavic pro ?
[2018-08-20 18:58:30]
andrwho25 :
I have a MA and just curious
[2018-08-20 18:58:57]
validat0r :
Video link is much more stable I heard
[2018-08-20 18:59:15]
quad808 :
!guide
[2018-08-20 18:59:18]
validat0r :
And of course MP is beefier
[2018-08-20 18:59:22]
quad808 :
!help
[2018-08-20 18:59:29]
quad808 :
crap, forgot what it was
[2018-08-20 18:59:36]
validat0r :
!wiki
[2018-08-20 18:59:49]
quad808 :
boy, am I lame...tanks!
[2018-08-20 19:00:10]
quad808 :
I remember this one
[2018-08-20 19:00:13]
quad808 :
!dji
[2018-08-20 19:00:19]
quad808 :
!beer
[2018-08-20 19:07:27]
faddyfareed :
yes appearantly no sd card since this mavic shipped with version 3.1000
[2018-08-20 19:10:14]
faddyfareed :
if upgrade back to 3.1000 and remove 905..do you think it will work or it will throw the "firmware mismatch error" like 4.1000 and up
[2018-08-20 19:12:31]
quad808 :
905...you just can't remove .0905 and expect it to work on later firmware. DJI put checks in place. The latest firmware you can do this on is .0700 and get away with it, without "special" methods. NLD uses just such a method on latest firmware, thanks to jezzab.
[2018-08-20 19:14:18]
faddyfareed :
I see
[2018-08-20 19:16:17]
faddyfareed :
yeah i tried plenty of time with jezzab's method.. with no luck
[2018-08-20 19:24:08]
quad808 :
pick up a copy of NLD, and get on with it. If you need altitude removal, then stay on .0700.
[2018-08-20 19:25:09]
faddyfareed :
yep it appears so
[2018-08-20 19:25:45]
faddyfareed :
NLD has worked well before with my P4P but it gave me issues with P4A..
[2018-08-20 19:54:44]
erwin :
I had the same issue, however after restoring it to a newer version, I got sort of a mixed firmware
[2018-08-20 19:55:19]
erwin :
(no microsd on my MP), but the height limit was disabled after that
[2018-08-20 19:55:49]
erwin :
didnt test NFZ though and I was scared :stuck_out_tongue: and reflashed latest official fw again
[2018-08-20 20:13:49]
faddyfareed :
yes mixing modules is another way to do
[2018-08-20 23:09:32]
lolo780 :
I put the latest firmware on my p4A. 0800 I think. Mixed modules still works.
[2018-08-21 00:46:09]
borillion_star :
is it possible to module mix with 01.04.0100 ?
[2018-08-21 02:52:19]
lolo780 :
Yes
[2018-08-21 07:15:59]
faddyfareed :
yes it does
[2018-08-21 07:20:23]
faddyfareed :
I'm trying to patch my mavic using nfzbypass with modified stage2.bin but dumldore doesn't say flashing complete, it stops here
[2018-08-21 07:20:24]
faddyfareed :
<https://imgur.com/UUcpecK>
[2018-08-21 07:20:35]
faddyfareed :
Is that normal?
[2018-08-21 08:01:15]
validat0r :
I wouldn't expect a flashing complete with a stage2.bin run ..
[2018-08-21 08:03:34]
faddyfareed :
oh so this is normal
[2018-08-21 08:04:30]
faddyfareed :
according to the guide, I should see “Completed. Exit DUMLdore and restart device” it will then quickly change to “Flashing complete. Device may be powered off”
[2018-08-21 15:51:45]
faddyfareed :
!apk
[2018-08-22 04:49:44]
c.binetti :
Which software u guys use for analyze inet traffic of ur bluestacks installed apps?
[2018-08-22 20:35:32]
validat0r :
how would i go about executing a linux cmd via telnet from a script?
[2018-08-22 22:51:58]
validat0r :
found it.
[2018-08-24 08:27:00]
edisonbattery :
are you talking about runninx a linux command on the birds internal system? please elaborate.
[2018-08-24 08:27:56]
validat0r :
no. not talking about that. talking about triggering a linux command on another device from the birds internal system
[2018-08-24 08:33:00]
mathieu.peyrega :
@ilovemynexus4 does bird busybox have ssh applet ?
[2018-08-24 08:36:10]
jezzab :
dropbear was uploaded a looooong time ago by @martinbogo. its in one of the repos
[2018-08-24 08:44:27]
validat0r :
thx, i missed that
[2018-08-24 08:54:19]
validat0r :
@mathieu.peyrega no .. and havent found @martinbogo s repo
[2018-08-24 08:59:36]
validat0r :
ok. i misunderstood .. in one "of the repos" .. not in martins repos
[2018-08-24 09:00:30]
validat0r :
ah, hostile has it
[2018-08-24 09:00:57]
validat0r :
<https://github.com/MAVProxyUser/busybox-1.25.1>
[2018-08-24 09:01:29]
validat0r :
not sure it has ssh though
[2018-08-24 09:22:51]
jezzab :
<https://github.com/MAVProxyUser/dji_system.bin/tree/master/mods>
[2018-08-24 10:54:18]
validat0r :
hmm, has to be adjusted to work with more recent firmwares ..
[2018-08-24 11:09:27]
validat0r :
hmm, and theres something missing in the script
[2018-08-24 11:32:27]
jezzab :
Ive never used the script. Just did it by hand what was needed to get it going. Which is very little
[2018-08-24 15:42:42]
borillion_star :
@mathieu.peyrega thank you for your scripts
[2018-08-24 16:23:05]
andrwho25 :
Any way to remove NFZ or even temporarily on the MA ?
[2018-08-24 16:25:54]
andrwho25 :
If I delete the app and install an older one where the NFZ db is not as strict, will it work ?
[2018-08-24 16:50:43]
rohan.p :
Hi DJI Reverse engineering slack team! Can someone tell me what the benifit NLD gives over doing it using the tools discussed here (dankdownloader DUMLdore etc)
[2018-08-24 16:50:47]
rohan.p :
is it just that its easier to use?
[2018-08-24 16:51:53]
cantrepeat :
Yes, @rohan.p It makes it a few mouse clicks and you're off and running.
[2018-08-24 16:53:04]
rohan.p :
@catalinaskirace Thank you so much for the quick answer :slightly_smiling_face:
[2018-08-24 17:50:56]
good.win.alexs :
@rohan.p also, nld go app has few features integrated that you will not find in the wild ;)
[2018-08-24 18:01:43]
rohan.p :
@good.win.alexs oh thats great, i was planning on buying it, can you clue me in on whats avail only on NLD?
[2018-08-24 18:03:47]
good.win.alexs :
Easy enable google maps, easy switch between ce/fcc/boost, easy switch between 2.3/2.4/2.5Ghz
[2018-08-24 18:05:20]
good.win.alexs :
Soon - enabling Galileo for geolocation
[2018-08-24 18:08:26]
good.win.alexs :
All this just editing text files
[2018-08-24 18:08:35]
good.win.alexs :
No more binary configs
[2018-08-24 18:08:55]
good.win.alexs :
This is just short intro @rohan.p;)
[2018-08-24 18:09:33]
rohan.p :
oh amazing! i just sent a email asking about being able to use boost (and a few more questions)! I cant wait to go home and use this software
[2018-08-24 18:11:09]
rohan.p :
@good.win.alexs is it hard/possible to use boost with iOS or is it only possible on android?
[2018-08-24 18:16:39]
cantrepeat :
it was worth every penny to me.
[2018-08-24 18:17:26]
cantrepeat :
NLD atm only has an apk file for android, no ipa for iOS
[2018-08-24 18:17:31]
cantrepeat :
I asked that as well.
[2018-08-24 18:18:46]
cantrepeat :
I have apple phones and iPads around the house but figured I'd look for an android device for flying. Ended up getting a CrystalSky.
[2018-08-24 18:19:14]
cantrepeat :
Rooted it and put NLD 4.1.22CS apk on it, once rooted.
[2018-08-24 18:20:08]
cantrepeat :
Quad also has a nice write up on rooting the CS
[2018-08-24 18:20:21]
good.win.alexs :
@ro it is for Android atm, but i did hear about some hacks for Go and Apple
[2018-08-24 18:20:37]
good.win.alexs :
You ask around on other threads
[2018-08-24 18:27:03]
rohan.p :
ah nice! thanks so much for this info. I have an s8 for work, so I totally don't mind using that. One last question, will i be able to silence my remote using NLD or does that require silencio? You guys sold me on this thanks so much!
[2018-08-24 19:03:26]
lolo780 :
How to remove NFZ on Mavic Air: delete the Air
[2018-08-24 19:12:55]
cantrepeat :
@rohan.p As far as I know, NLD does not have that feature atm. I didn't see it the apk patcher for 4.1.3 or any of the notes. I did buy Silenco and at 6bucks US it's awesome.
[2018-08-24 19:42:58]
good.win.alexs :
@rohan.p even free version of Silencio can make RC less annoying. Just it will have awful turon on/off melody. Or you can spend few bucks to shut it totally off :)
[2018-08-24 20:04:57]
andrwho25 :
@lowellfoo780 lol
[2018-08-24 20:07:47]
lolo780 :
Or replace Air with Platinum
[2018-08-24 20:14:22]
rohan.p :
@catalinaskirace @good.win.alexs Ah that makes sense, I totally dont mind spending the money but I might have to come back here to figure out how to use NLD and Silenco together, assuming that NLD will put a new RC FW
[2018-08-24 20:16:18]
cantrepeat :
yeah, they don't conflict with each other.
[2018-08-24 20:16:50]
cantrepeat :
flash your drone and controller to where you want them and after then run the silenco
[2018-08-24 20:20:58]
good.win.alexs :
and NLD has nothing to RC, only your AC
[2018-08-24 20:21:52]
good.win.alexs :
i assume that NLD can flash stock FW on RC (never tried) as it uses DUMLDore in behind. But that’s all. So feel free to use Silencio for RC
[2018-08-24 21:17:54]
rohan.p :
Amazing! thanks so much :heart:
[2018-08-24 22:50:27]
cantrepeat :
Yeah, it can flash the RC as well.
[2018-08-25 08:47:58]
1313659 :
Modify the packer script FC_patch_sequence_for_dummy_verify.sh . PATH_TO_TOOLS it points to the path where dji-firmware-tools is installed .Why not?
[2018-08-25 09:43:23]
validat0r :
Try Linux / wsl
[2018-08-25 13:19:22]
rohan.p :
Hey guys thanks for the help so far. I tried flashing twice last night but it got stuck at 100% and then never made it further. I left it like that for an hour. I am going from the latest fw to V01.03.0700, is there a “median fw” I should be doing first?
[2018-08-25 13:34:44]
cantrepeat :
what version are you on atm?
[2018-08-25 13:36:05]
cantrepeat :
and to be honest, I would consider staying on 01.04.0300 and see if Quad updates NLDs
[2018-08-25 13:36:28]
cantrepeat :
I don't know what his plans are. So take that with a grain of salt
[2018-08-25 13:53:03]
rohan.p :
@catalinaskirace I am currently on 1.04.0400, I don’t mind downgrading and upgrading
[2018-08-25 13:54:18]
cantrepeat :
Ok, then I think Quad suggested going to .0100 then to 3.0900 and the finally to 3.0700 and flashing twice.
[2018-08-25 13:54:50]
cantrepeat :
4.0100
[2018-08-25 14:06:25]
rohan.p :
@catalinaskirace thank you so much, I will try that now
[2018-08-27 11:49:56]
sheldon.holy :
Having issues with DUMLdore - the .exe opens fine when no drone is connected. When a drone is connected up it refuses to start
[2018-08-27 11:50:02]
sheldon.holy :
Any suggestions?
[2018-08-27 11:57:12]
cantrepeat :
are you using 3.10?
[2018-08-27 11:58:41]
sheldon.holy :
Yessir
[2018-08-27 12:00:01]
jezzab :
perhaps similar:
<https://github.com/jezzab/DUMLdore/issues/31>
[2018-08-27 12:01:12]
sheldon.holy :
Thank you
[2018-08-27 12:01:18]
sheldon.holy :
I will fiddle with the drivers first
[2018-08-27 12:03:06]
jezzab :
TL;DR if you have 2 comports for the drone when its plugged in, you will have issues and have to disable one (one will be dead anyway and a left over dodgy driver). His fix at the end worked
[2018-08-27 12:04:03]
jezzab :
There should technically be only one. If there is two, DUMLdore can grab the dead one as they both have the same VID/PID
[2018-08-27 12:08:23]
cantrepeat :
@jezzab is it the current release 3.10 that has "or there is even a one click button on the latest DUMLDore v3 version" ?
[2018-08-27 12:08:33]
cantrepeat :
to root
[2018-08-27 12:09:23]
jezzab :
<https://github.com/jezzab/DUMLdore/releases>
[2018-08-27 12:09:44]
sheldon.holy :
Right OK
[2018-08-27 12:09:45]
sheldon.holy :
Trying now
[2018-08-27 12:09:57]
sheldon.holy :
I have a similar problem on this PC with the Spark gimbal calib. software
[2018-08-27 12:11:05]
sheldon.holy :
Boom! worked
[2018-08-27 12:11:07]
sheldon.holy :
Thanks
[2018-08-27 12:22:30]
sheldon.holy :
On this P4 FW version is showing "unknown"
[2018-08-27 12:22:46]
sheldon.holy :
Brand new 3-in-1 board from DJI is faulty (or on ancient firmware)
[2018-08-27 12:22:47]
sheldon.holy :
Great
[2018-08-27 12:23:38]
jezzab :
What does it say in brackets?
[2018-08-27 12:23:48]
jezzab :
like `Unknown (xxxxxxxxx)`
[2018-08-27 12:24:01]
sheldon.holy :
Nothing shown
[2018-08-27 12:24:14]
jezzab :
screenshot it
[2018-08-27 12:24:56]
sheldon.holy :
[2018-08-27 12:25:19]
sheldon.holy :
Updated and worked fine on a Mavic and other P4s, clearly a major HW issue
[2018-08-27 12:25:35]
jezzab :
Ah the model isnt unknown its the firmware is out of whack
[2018-08-27 12:25:43]
jezzab :
flash it again
[2018-08-27 12:26:00]
sheldon.holy :
Refuses to flash :confused:
[2018-08-27 12:26:07]
jezzab :
P4 is a house of cards. Their update process is iffy
[2018-08-27 12:26:24]
jezzab :
As in DUMLdore or the AC?
[2018-08-27 12:26:32]
jezzab :
Need more info
[2018-08-27 12:26:33]
sheldon.holy :
DUMLdore
[2018-08-27 12:26:41]
jezzab :
WHat does it say?
[2018-08-27 12:26:47]
jezzab :
feel like im pulling teeth
[2018-08-27 12:26:52]
sheldon.holy :
Hold on haha
[2018-08-27 12:26:57]
sheldon.holy :
Grabbing a SS
[2018-08-27 12:27:26]
jezzab :
Im not going to hang around in spoon feeding all night, im usually never in here. but i will help if you get cracking lol
[2018-08-27 12:28:02]
sheldon.holy :
[2018-08-27 12:28:28]
jezzab :
Ahh
[2018-08-27 12:28:40]
jezzab :
I fixed that but havent pushed. Give me 5
[2018-08-27 12:28:45]
sheldon.holy :
Oh
[2018-08-27 12:34:50]
jezzab :
<https://github.com/jezzab/DUMLdore/releases/tag/v3.12>
[2018-08-27 12:35:46]
sheldon.holy :
trying
[2018-08-27 12:35:47]
sheldon.holy :
Thanks!
[2018-08-27 12:37:47]
cantrepeat :
#hero
[2018-08-27 12:39:29]
sheldon.holy :
Stuck on transferring to device
[2018-08-27 12:39:34]
sheldon.holy :
Think this P4 is borked
[2018-08-27 12:39:53]
jezzab :
Try it again. Ive had issues with my P4 like that before
[2018-08-27 12:39:59]
sheldon.holy :
Yessir
[2018-08-27 12:40:06]
sheldon.holy :
The gimbal status light is flashing green/red
[2018-08-27 12:40:11]
sheldon.holy :
Implying that it's updating..
[2018-08-27 12:40:44]
sheldon.holy :
think that's more than it was doing with assistant
[2018-08-27 12:42:54]
sheldon.holy :
Battery is updating, I think it's working despite the status bar not changing
[2018-08-27 12:43:10]
jezzab :
Ok bit strange but leave it be
[2018-08-27 12:43:27]
sheldon.holy :
Yeah, lunch time
[2018-08-27 12:43:38]
sheldon.holy :
If this all works I will donate many moneys
[2018-08-27 12:43:43]
sheldon.holy :
gets me out of a serious pickle
[2018-08-27 12:44:12]
jezzab :
All good but when you think its done I would flash it again with the same firmware
[2018-08-27 12:45:02]
sheldon.holy :
OK, I will do
[2018-08-27 12:45:13]
sheldon.holy :
I'm using the oldest archived file
[2018-08-27 12:55:51]
sheldon.holy :
It's now showing a FW version
[2018-08-27 12:55:53]
sheldon.holy :
:slightly_smiling_face:
[2018-08-27 12:56:17]
jezzab :
Thats good. Give it another flash. It should be quite quick
[2018-08-27 13:02:15]
1313659 :
DUMLdoreV3.12 connection mavic 2 seems to be unresponsive and cannot ROOT.
[2018-08-27 13:04:08]
jezzab :
Dude. DUMLdore doesnt even root Mavic Air and ive never used it on a Mavic 2, doesnt support Mavic 2 yet and no mention of it on the DUMLdore github repo.
[2018-08-27 13:04:18]
jezzab :
Mine wont be here for a few days
[2018-08-27 13:05:09]
1313659 :
Can DUMLdore connect to mavic 2 devices in the future?
[2018-08-27 13:05:15]
kilrah :
nobody knows...
[2018-08-27 13:05:24]
jezzab :
How the fuck should i know lol
[2018-08-27 13:05:30]
kilrah :
unless you think we can guess how a mavic 2 works without having ever seen one
[2018-08-27 13:07:11]
1313659 :
jezzab Should bring us hope soon, huh, huh
[2018-08-27 13:07:22]
jezzab :
_looks in the crystal ball_
[2018-08-27 13:07:42]
sheldon.holy :
My M2 still isn't shipped :disappointed:
[2018-08-27 13:07:47]
sheldon.holy :
DJI are assholes
[2018-08-27 13:08:01]
jezzab :
when did you order?
[2018-08-27 13:08:11]
sheldon.holy :
Immediately as they came on the store
[2018-08-27 13:08:15]
ender :
They always were but they offer nice toys as price for your soul :slightly_smiling_face:
[2018-08-27 13:08:24]
sheldon.holy :
(only bought it to take it apart you understand)
[2018-08-27 13:08:37]
sheldon.holy :
I'm a DJI dealer but it's quicker to buy it from the store
[2018-08-27 13:09:49]
cantrepeat :
Jezzab, how's work coming on the mavic 3 pro?
[2018-08-27 13:10:12]
ender :
Well i dont know about Jezz but i am busy rooting the Anafi 2 Pro :stuck_out_tongue:
[2018-08-27 13:10:15]
sheldon.holy :
Yeah I'm waiting for the Inspire 4 root too
[2018-08-27 13:10:38]
1313659 :
@jezzab Have you received mavic pro2?
[2018-08-27 13:10:56]
ender :
lolz
[2018-08-27 13:12:02]
jezzab :
i ordered my mp2 2 days ago and it was shipped yesterday from DJI website
[2018-08-27 13:12:19]
cantrepeat :
I heard diff broke DJI Go 7 already too
[2018-08-27 13:12:27]
jezzab :
lol
[2018-08-27 13:14:50]
1313659 :
Haha, I hope that you can take it to the outside to take pictures of it, don't always throw it on the workbench.
[2018-08-27 13:15:26]
jezzab :
Me too. I will force myself
[2018-08-27 13:15:36]
marvinhowru :
I heard MP2 uses Ambarella H2 chip
[2018-08-27 13:15:46]
jezzab :
Dont really want to brick it before ive atleast flown it
[2018-08-27 13:17:16]
1313659 :
It will feel lonely and you should buy two MZ or M2.:wink:
[2018-08-27 13:18:02]
jezzab :
See if my numbers come up on the lottery
[2018-08-27 13:18:46]
jezzab :
Anyway, im off. ttyl
[2018-08-28 15:55:47]
cantrepeat :
Question about FC_Patch - 3. Copy the 0305 file next to the .cfg.ori file without modifying it in anyway (no need to decrypt unsig or whatever). Is that saying to rename the file from wm220_0306_v03.02.44.07_20171116.pro.fw.sig to wm220_0306_v03.02.44.07_20171116.pro.fw.cfg.ori
[2018-08-28 15:56:36]
validat0r :
?
[2018-08-28 15:57:05]
cantrepeat :
In the github for FC patch it says 3. Copy the 0305 file next to the .cfg.ori file without modifying it in anyway (no need to decrypt unsig or whatever).
[2018-08-28 15:57:28]
cantrepeat :
not sure if that is saying to copy to same location or to rename the extension
[2018-08-28 15:58:22]
validat0r :
you need the cfg (altered to match new subversion), the actual fc fw 306 with updated name, and the unaltered 305 file
[2018-08-28 16:00:19]
validat0r :
the 305 file is the only one you dont need to alter (content- and filename- wise)
[2018-08-28 16:00:43]
validat0r :
it's still propery encrypted and signed
[2018-08-28 16:01:27]
validat0r :
the new 306 file is neither crypted nor signed
[2018-08-28 16:01:56]
validat0r :
not crypted cause you dont need it, and not signed because you cannot
[2018-08-28 16:04:30]
cantrepeat :
ah, so by "copy" it just means to put it where the wm220.cfg.ori is located
[2018-08-28 16:04:43]
cantrepeat :
I've not moved on to the 306 stuff yet
[2018-08-28 16:05:23]
cantrepeat :
when it said to "copy" 305 next to .cfg.ori I at first thought it wanted me to rename the extension.
[2018-08-28 16:05:51]
cantrepeat :
306 after lunch
[2018-08-28 16:06:55]
good.win.alexs :
Wondering how much fried chicken will be there...
[2018-08-28 16:10:33]
cantrepeat :
taquitoes
[2018-08-28 16:10:45]
cantrepeat :
hot salsa
[2018-08-28 16:13:15]
cantrepeat :
What's for dinner goodwin?
[2018-08-28 16:15:00]
cantrepeat :
potato pancakes?
[2018-08-28 16:27:12]
validat0r :
yeah .. you need the altered cfg (first x bytes blank, 306 filename adjusted), the altered 306 with different version no, and the untouched 305, put them in a tar, boom bang flash it
[2018-08-28 18:19:53]
borillion_star :
Fc patch?
[2018-08-28 18:23:37]
cantrepeat :
@borillion_star <https://github.com/o-gs/DJI_FC_Patcher>
[2018-08-28 19:20:46]
royeiror :
Awesome
[2018-08-28 19:23:45]
royeiror :
Seems like the harder mod for the disco would be the range
[2018-08-29 18:26:47]
cantrepeat :
I saw someone say that g_config.flying_limit.height_limit_enabled default value should be something other then 2, this would allow you to set the restriction in the DJI GO app. If at 2 it ignores all values.
[2018-08-29 18:42:43]
mathieu.peyrega :
@catalinaskirace: if you're using NLD app version, you can set a value over 500 and don't need to patch this particular one (but still need to patch other alt related ones). Only applies to NLD app version
[2018-08-29 18:44:47]
cantrepeat :
I do have NLD 4.1.22 CS app installed
[2018-08-29 18:49:49]
mathieu.peyrega :
so patching :
"g_config.flying_limit.limit_height_rel"
"g_config.flying_limit.limit_height_abs"
"g_config.flying_limit.limit_height_abs_without_gps"
[2018-08-29 18:50:51]
mathieu.peyrega :
without changing g_config.flying_limit.height_limit_enabled will still allow you to fly over 500m if needed, AND to set a maxalt over 500m and have the FC take it into account
[2018-08-29 18:51:08]
mathieu.peyrega :
what bird do you use ?
[2018-08-29 18:56:04]
cantrepeat :
mavic PP
[2018-08-29 18:57:13]
cantrepeat :
so leave height limit to 1 change the other 3 and with NLD 4.1.22CS I can set it to 3000 if I choose and it will pass the 500m mark
[2018-08-30 01:24:18]
quad808 :
[2018-08-30 01:25:05]
quad808 :
The # is the line to look for the code using notepad++
[2018-08-30 01:31:42]
jakub :
hmm... I'm getting `Version missmatch` after flashing 04.300 on Mavic Pro, both AC and RC are on 04.300 where AC has patched 306 via <https://github.com/o-gs/DJI_FC_Patcher> (confirmed in logs, it's new version). Aside from that, nfz files are removed from AC and app
[2018-08-30 01:31:43]
jakub :
any ideas?
[2018-08-30 01:58:55]
quad808 :
Did you start with a clean 01.04.0300?
[2018-08-30 01:59:07]
quad808 :
On your bird?
[2018-08-30 02:00:35]
quad808 :
Did you manually remove nfz files from the bird? Can't do that @jakub
[2018-08-30 02:23:16]
jakub :
I have started with clean 04.0300, and removed NFZ from amt manually after flushing patched 306
[2018-08-30 02:23:32]
jakub :
So it's NFZ removal issue?
<https://i.imgur.com/e1VQd6h.jpg>
[2018-08-30 03:41:38]
1313659 :
@jakub Remove NFZ, is the aircraft allowed to take off?
[2018-08-30 06:22:31]
kilrah :
with old app yes
[2018-08-30 06:27:03]
mathieu.peyrega :
@jakub: even after flashing modded FC, you cannot simply delete nfz files. you still need to apply @jezzab patch
[2018-08-30 06:27:34]
mathieu.peyrega :
if you removed nfz file in 1.04.0300 without patched dji_flight, the system will not let you fly thebird
[2018-08-30 06:29:49]
validat0r :
It can simply be removed with the patch? I always thought you have to empty the table of the sqlite db.
[2018-08-30 06:35:48]
kilrah :
ah they added a protection layer then
[2018-08-30 06:39:46]
mathieu.peyrega :
yes, you need : the patch AND an empty db (not removed)
[2018-08-30 06:40:01]
mathieu.peyrega :
but the wiki and @jezzab payload takes care of both
[2018-08-30 06:41:45]
jezzab :
`dji_flight` will check for the existence of the db on startup and if its not there, lock.
if its there it will verify it, if it fails, it locks
the system verifies `dji_flight`s integrity on startup.
[2018-08-30 06:42:49]
jezzab :
clear db -> patch `dji_flight` to pass the modded db -> patch the system to pass the modded `dji_flight` -> happy days
[2018-08-30 06:44:00]
validat0r :
Patch the system? How does that work?
[2018-08-30 06:44:03]
mathieu.peyrega :
to add a point : "clear" means empty the table (not remove the file)
[2018-08-30 06:44:25]
validat0r :
Empty the table
[2018-08-30 06:46:57]
jezzab :
`system.md5`
[2018-08-30 06:48:47]
validat0r :
Actually haven't messed with that one
[2018-08-30 06:53:56]
validat0r :
I assumed it was protected in some way ..
[2018-08-30 07:22:49]
1313659 :
After installing the NFZ patch, is there a red no-fly zone display in djigo4?
[2018-08-30 07:31:30]
jezzab :
That would depend if your running a NFZ patched android app or not.
[2018-08-30 08:15:27]
andrwho25 :
Which NFZ patch are we talking about here ? Can you do this on MA ?
[2018-08-30 08:15:42]
validat0r :
MA is still sealed, i heard
[2018-08-30 11:54:15]
jakub :
@mathieu.peyrega @jezzab damn.. that make sense - totally forgot about NFZ removal issue on newest fw. @mathieu.peyrega mentioned something about cleaning db, I can't see anything like that on wiki page is this still needed?
[2018-08-30 11:55:24]
jezzab :
You touch the db and it isnt patched it will fail
[2018-08-30 11:55:45]
jezzab :
the db has a .sig file holding the md5 of the db
[2018-08-30 11:57:46]
jakub :
so if I will apply stage2 patch I don't have to touch db ? :wink:
[2018-08-30 11:58:49]
jezzab :
no. it will replace the db with a blank one, replace `dji_flight` with a patched one that the system will pass in its integrity checks
[2018-08-30 11:59:29]
jakub :
gotta so process is automated
[2018-08-30 11:59:31]
jakub :
thanks!
[2018-08-30 12:04:59]
cantrepeat :
wake up to find out don't delete NFZ from 4.0300 that saved me some questions!
[2018-08-30 12:05:33]
jakub :
yw lol
[2018-08-30 12:09:55]
cantrepeat :
so use jezzab stage2 patch before flashing over FC_Patch 4.0300 or does the order matter?
[2018-08-30 12:11:32]
cantrepeat :
ah just read it again, flash FC_Patcher then Jezzab's stage2 bin
[2018-08-30 12:27:18]
jakub :
one more thing @jezzab, on nfzbypass there's a link to master release of DUMLdore, but latest version has no stage2.bin file, there's just payload.bin - should I use older version? or just `mv payload.bin payload.bin.old ; mv stage2.bin payload.bin` ?
[2018-08-30 12:35:53]
cantrepeat :
is there a new method for getting 1.5w boost running on 4.1.22 CS and FC_Patcher 4.0300 ?
[2018-08-30 12:37:51]
jezzab :
<https://github.com/jezzab/DUMLdore/releases>
[2018-08-30 12:38:00]
jezzab :
Spoonfeeding time is over for me
[2018-08-30 12:38:09]
jezzab :
Have a good day/night
[2018-08-30 12:41:35]
cantrepeat :
It was very yummy!
[2018-08-30 12:41:51]
jakub :
haha see ya @jezzab;-)
[2018-08-30 12:48:03]
jakub :
after running stage2 patching
```-rw------- root root 1002496 1980-01-01 00:02 nfz.db
-rw------- root root [480 1980-01-01](tel:4801980-01-01) 00:07 nfz.sig```
[2018-08-30 12:48:13]
jakub :
not sure it worked, we'll see in future I guess
[2018-08-30 12:50:04]
validat0r :
do a sqlite3 nfz.db
[2018-08-30 12:50:10]
validat0r :
then .tables
[2018-08-30 12:51:06]
validat0r :
then a SELECT count(*) from <first table>;
[2018-08-30 12:51:11]
validat0r :
whats the count?
[2018-08-30 12:52:47]
validat0r :
@jakub ^
[2018-08-30 12:58:10]
jakub :
on it @ilovemynexus4
[2018-08-30 12:59:12]
jakub :
```root@wm220_dz_ap0002_v1:/amt/nfz # sqlite3 nfz.db
register_localized_collators() failed```
[2018-08-30 12:59:21]
jakub :
after pulling ```$ sqlite nfz.db
Unable to open database "nfz.db": file is encrypted or is not a database```
[2018-08-30 13:00:04]
validat0r :
ok. maybe I rememberes incorrectly :disappointed:
[2018-08-30 13:00:14]
validat0r :
i thought it was plaintext on the AC
[2018-08-30 13:00:15]
jakub :
most likely I did something wrong haha
[2018-08-30 13:00:24]
validat0r :
jezzab will set me straight :smile:
[2018-08-30 13:00:27]
jezzab :
no be didnt use sqlite3 locally. you cant run it on te bird
[2018-08-30 13:00:42]
jakub :
@jezzab second run is locally
[2018-08-30 13:00:47]
jezzab :
i know
[2018-08-30 13:00:50]
jakub :
ah k
[2018-08-30 13:00:55]
jezzab :
and u used sqlite
[2018-08-30 13:01:05]
jakub :
damn.
[2018-08-30 13:01:07]
jezzab :
not sqlite3 like @ilovemynexus4 said
[2018-08-30 13:01:08]
jakub :
my bad :wink:
[2018-08-30 13:01:28]
jakub :
```sqlite> SELECT count(*) from airmap_geofence_polygons;
0```
[2018-08-30 13:01:30]
jakub :
looks good
[2018-08-30 13:01:35]
jezzab :
;)
[2018-08-30 13:01:38]
validat0r :
ataboy
[2018-08-30 13:01:43]
jakub :
\o/
[2018-08-30 13:01:50]
jakub :
thank you @ilovemynexus4 @jezzab;-)
[2018-08-30 13:03:52]
jezzab :
if it was me i would make sure you can arm the motors out of a NFZ
[2018-08-30 13:04:10]
jezzab :
if you can, your golden
[2018-08-30 13:04:35]
jakub :
I'm not really close to any NFZ :stuck_out_tongue:
[2018-08-30 13:04:54]
jakub :
so no idea when I'll be able to test it
[2018-08-30 13:05:06]
validat0r :
just add a NFZ of your area to the DB
[2018-08-30 13:05:17]
jezzab :
no OUT of one
[2018-08-30 13:05:20]
jezzab :
not inside
[2018-08-30 13:05:30]
jakub :
ahh I can start motors
[2018-08-30 13:05:34]
jakub :
in my house
[2018-08-30 13:05:37]
jakub :
so I guess I'm fine
[2018-08-30 13:05:40]
jezzab :
done deal then
[2018-08-30 13:06:38]
jakub :
hmm last things, patch for DJI GO app with Galileo satelites is out only in NLD?
[2018-08-30 13:07:31]
jezzab :
only NLD afaik
[2018-08-30 13:08:34]
jakub :
gotta, this one has to wait then - bought 3d printer and don't have enough $$$ yet lol
[2018-08-30 13:37:13]
mathieu.peyrega :
@jakub: one user reported that Galileo may now work even without the app sdie patch. I cannot test this myself as my birds have already gone though the app side patch
[2018-08-30 13:37:38]
jakub :
@mathieu.peyrega sure
[2018-08-30 13:37:44]
mathieu.peyrega :
obvisouly, this is the expected behaviour that a gnss receiver should be able to track satellties without being pre-feeded once with ephemerids
[2018-08-30 13:38:11]
mathieu.peyrega :
maybe it was not working before because not enough active sats, but 3 more have been activated recently so it may work now
[2018-08-30 13:38:52]
jakub :
@mathieu.peyrega thanks for feedback :slightly_smiling_face: btw <https://github.com/o-gs/DJI_FC_Patcher/pull/5/files>
[2018-08-30 13:39:11]
jakub :
I have send few more commits, it's working for me atm
[2018-08-30 13:39:54]
mathieu.peyrega :
ok, i'll review that when I have time
[2018-08-30 13:39:59]
jakub :
thanks
[2018-08-30 19:55:59]
cantrepeat :
is it necessary to do the wiki NFZ bypass if you've done the disable_airport_fly _limit in flight params?
[2018-08-30 20:03:38]
mathieu.peyrega :
I thinks it's not, but it's better to do it
[2018-08-30 20:12:27]
kilrah :
dunno if it has changed, but back then the param would allow to fly but becasue of the DB you'd have the app go crazy at you with obnoxious "IN NFZ, LAND NOW" kind of messages
[2018-08-30 20:12:56]
kilrah :
and "landing in 10 seconds", but that wouldn't actually happen
[2018-08-30 20:13:10]
kilrah :
you could just ignore, but was annoying
[2018-08-30 20:14:43]
mathieu.peyrega :
anyway @jezzab patch is very easy to apply....
[2018-08-30 20:14:51]
cantrepeat :
well I ran the patch, need to check the db now. However, I can't bird to connect to my virtual box through USB. I gotta work on that.
[2018-08-30 20:15:13]
cantrepeat :
get bird*
[2018-08-30 21:50:12]
andrwho25 :
@mathieu.peyrega: where can i find that patch?
[2018-08-30 22:02:07]
validat0r :
<https://github.com/o-gs/DJI_FC_Patcher>
[2018-08-30 22:05:31]
validat0r :
or maybe search for stage2.bin in <https://www.rcgroups.com/forums/showthread.php?2916078-DJI-Dashboard-How-To-tips-and-tricks-%2AMAVIC%2A>
[2018-08-30 22:13:23]
cantrepeat :
and then follow with the NFZ patch <https://dji.retroroms.info/howto/nfzbypass>
[2018-08-30 22:15:57]
andrwho25 :
ah, i think this only works for MP right? im willing to give my MA a shot and see how it fares
[2018-08-30 22:17:28]
cantrepeat :
yeah wiki says only mavic
[2018-08-31 06:41:27]
kilrah :
nothing of this applies to MA, very different architecture and protection schemes
[2018-08-31 06:44:55]
mathieu.peyrega :
Maybe some stuff could be done to P4P V2. I remember reading it was basically a Mavic with P4P camera... but I don't have one for testings etc.
[2018-08-31 08:14:34]
cantrepeat :
My spoon-feeding moment this morning, can't connect to your mavic through windows and ubuntu on a virtual box? adb kill-server then sudo adb start-server
[2018-08-31 08:14:46]
cantrepeat :
that'll save me a couple of steps now.
[2018-08-31 13:55:14]
1313659 :
@mathieu.peyrega I have P4P V2.0 and you can send it to me for testing.
[2018-08-31 14:06:31]
mathieu.peyrega :
@1313659: no
[2018-08-31 14:19:50]
1313659 :
Haha. . Worried that my bird will turn bricks. Don't worry, I can send it to DJI for repair immediately, because it only takes half an hour to get to DJI.
[2018-08-31 14:21:39]
1313659 :
All birds can be repaired free of charge and the repair service is very good.
[2018-08-31 14:26:34]
validat0r :
so it's a neverending cycle of trial and brick over there? nice
[2018-08-31 15:00:46]
cantrepeat :
Just another brick in the wall?
[2018-09-01 07:02:49]
mathieu.peyrega :
So not even the tiny adrenaline shot before pressing the "go flash" button ?
[2018-09-01 07:36:44]
1313659 :
:stuck_out_tongue_winking_eye:Of course, I heard di di di... sound, a little adrenaline
[2018-09-01 14:38:29]
kurdi80 :
Hi, working on a p4p here following the steps. on step#4 "unsig the 306 file" I cannot find the "bin" directory which should be in "/vendor/bin" to where we should push the 306 file. is it hidden? how can we unhide it?
[2018-09-01 14:52:28]
cantrepeat :
did you make the vendor directory writable first?
[2018-09-01 14:52:46]
kurdi80 :
yes following the steps word for word
[2018-09-01 14:53:06]
cantrepeat :
so adb shell then mount -o remount,rw /vendor and then exit?
[2018-09-01 14:53:30]
cantrepeat :
exit puts you back in the terminal, not the shell
[2018-09-01 14:53:52]
cantrepeat :
so you should see bash$
[2018-09-01 14:54:36]
cantrepeat :
once back at the terminal you do the adb push wm331_0306_v03.02.44.07_20171116.pro.fw.sig /vendor/bin/
[2018-09-01 14:55:44]
kurdi80 :
yes, after making the vendor directory writable and exiting i'm back to my folders where i'm working from
[2018-09-01 14:56:22]
cantrepeat :
ok then you should be at this step adb push wm331_0306_v03.02.44.07_20171116.pro.fw.sig /vendor/bin/
[2018-09-01 14:56:28]
kurdi80 :
but if I use the adb push from there it tells me that is an unrecognizable instruction
[2018-09-01 14:56:33]
cantrepeat :
did you do that and it copy the file to the p4p
[2018-09-01 14:56:53]
kurdi80 :
that's what i'm trying to do without luck or little knowledge :slightly_smiling_face:
[2018-09-01 14:57:39]
cantrepeat :
are you sure you got out of the shell and back at the terminal?
[2018-09-01 14:58:12]
kurdi80 :
yes. i'm on the command prompt in the folder where the files we are working on are
[2018-09-01 14:58:37]
cantrepeat :
have you tried closing the terminal and opening a new one and trying the adb push wm331_0306_v03.02.44.07_20171116.pro.fw.sig /vendor/bin/
[2018-09-01 14:59:46]
cantrepeat :
did you check to see if the wm331_0306_v03.02.44.07_20171116.pro.fw.sig is in fact in that folder?
[2018-09-01 15:00:34]
kurdi80 :
yes, i'm sitting in the folder where wm331_0306_v03.02.44.07_20171116.pro.fw.sig is located
[2018-09-01 15:00:56]
kurdi80 :
I might be missing something here, what is the "terminal"?
[2018-09-01 15:01:45]
cantrepeat :
the command line in a linux IE bash$ command line vs the shell when you do adb shell
[2018-09-01 15:02:31]
cantrepeat :
are you doing this on a windows machine?
[2018-09-01 15:02:42]
cantrepeat :
or in a virtual box
[2018-09-01 15:02:42]
kurdi80 :
yes
[2018-09-01 15:02:55]
kurdi80 :
windows
[2018-09-01 15:03:02]
cantrepeat :
so are you using winbash?
[2018-09-01 15:03:55]
kurdi80 :
not sure what that is. i'm opening the adb shell using dumldore. rest normal windows cmd
[2018-09-01 15:04:06]
cantrepeat :
ah
[2018-09-01 15:04:29]
cantrepeat :
well I'm not too familiar with dumldores adb shell.
[2018-09-01 15:04:41]
kurdi80 :
seems that is what i'm missing. sorry someone called. brb
[2018-09-01 15:04:55]
kurdi80 :
but need to know how to get and use winbash in this case
[2018-09-01 15:05:27]
cantrepeat :
[www.win-bash.sourceforge.net](http://www.win-bash.sourceforge.net)
[2018-09-01 15:06:38]
cantrepeat :
what I do is make a directory/folder on the C: drive and unzip win bash to, I named it adb and put the 331 file in there. Start winbash with the winbash bat file start_shell.bat
[2018-09-01 15:06:49]
cantrepeat :
from there you have full adb support.
[2018-09-01 15:08:30]
cantrepeat :
You may need to install a USB driver as well. When you plug your p4p into the PC and look in the windows device manager does it have an exclamation mark over the drones device?
[2018-09-01 15:21:14]
cantrepeat :
At a point in doing the FC_patcher you're going to need a linux system or virtual box running linux like ubuntu 18.xx. You will need access to a python environment.
[2018-09-01 15:21:52]
cantrepeat :
It's all very doable. I hadn't use linux in probably 20 or 25 years.
[2018-09-01 15:22:38]
kilrah :
you can use WSL most likely if you're on win10.
[2018-09-01 15:37:50]
kurdi80 :
OK. I got winbash and now on the bash$ command prompt
[2018-09-01 15:38:09]
kurdi80 :
put the 331 file in the folder as you described above
[2018-09-01 15:38:54]
kurdi80 :
but when trying the adb push it says command not found
[2018-09-01 15:40:56]
cantrepeat :
is your p4p connected?
[2018-09-01 15:41:06]
cantrepeat :
can you adb shell to it from within winbash
[2018-09-01 15:48:06]
kurdi80 :
yes. it was.
[2018-09-01 15:48:20]
kurdi80 :
it was connected. battery died on me now and charging
[2018-09-01 15:48:35]
kurdi80 :
does it have to do with rooting?
[2018-09-01 15:56:30]
kurdi80 :
I should got it now. must root it first
[2018-09-01 16:02:21]
cantrepeat :
yes the bird must be rooted
[2018-09-01 16:03:31]
cantrepeat :
I don't have a p4p, but from what I read dumlracer ubersploit only work on mavic and the air
[2018-09-01 16:06:46]
kurdi80 :
it is rooted now. I can see the vendor/bin/ folder
[2018-09-01 16:07:06]
kurdi80 :
but going back to following the steps i'm still at a standstill
[2018-09-01 16:07:13]
kurdi80 :
done the writable part
[2018-09-01 16:07:26]
kurdi80 :
exited adb shell
[2018-09-01 16:07:50]
kurdi80 :
opened the winbash and now at bash$ command prompt
[2018-09-01 16:08:05]
kurdi80 :
still when doing the adb push command it says "command not found"
[2018-09-01 16:11:34]
kurdi80 :
the 331 file is already in same folder for winbash along with start_shell.bat
[2018-09-01 16:16:56]
mathieu.peyrega :
guy's just found a bug in the patcher, update to rev newer than 99294bc before going further !
[2018-09-01 16:17:13]
mathieu.peyrega :
(not a deadly bug, but affects the GNSS configuration)
[2018-09-01 16:23:12]
cantrepeat :
in galileo stuff?
[2018-09-01 16:24:12]
cantrepeat :
nvm just saw the patch note
[2018-09-01 16:25:20]
mathieu.peyrega :
you'd better regen a new image and reflash
[2018-09-01 16:25:31]
cantrepeat :
me?
[2018-09-01 16:26:08]
cantrepeat :
nvm just saw it in general
[2018-09-01 16:26:11]
cantrepeat :
I'll do it
[2018-09-01 16:26:14]
mathieu.peyrega :
yes, because you flashed before I fixd the bug
[2018-09-01 16:27:00]
mathieu.peyrega :
the threshold parameters for GPS position are messed up in previous versions
[2018-09-01 16:27:33]
mathieu.peyrega :
was wrongly :
newubxframes = newubxframes + ubxcfggen.genUBXCFGNAV5(7,2,0,5,0,10.0,10.0,30,300,0.0,1.0,0,0,60)
instead of :
newubxframes = newubxframes + ubxcfggen.genUBXCFGNAV5(7,2,0,5,0,0,10.0,10.0,30,300,0.0,1.0,0,0,60)
the missing 0 in 5th position is shifting all args in the call
[2018-09-01 16:42:16]
cantrepeat :
so I can just pull and replace the ubxcfggen.gen file? Nothing else changed?
[2018-09-01 16:43:14]
mathieu.peyrega :
ubxcfggen.py was correct, its the wmXXX_patcher.py that were affected (all birds)
[2018-09-01 16:44:40]
cantrepeat :
ah ok
[2018-09-01 16:45:33]
mathieu.peyrega :
advantage of making stuff public and getting some users feedbacks ! it let fond and correct bugs !
[2018-09-01 17:05:57]
cantrepeat :
there was a change to path to tools in dummy verify as well?
[2018-09-01 17:06:44]
mathieu.peyrega :
@jakub suggested to make it an environment variable so it's not needed to modify the repo file itself (makes it easier when pulling the git to avoid merging changes)
[2018-09-01 17:07:00]
mathieu.peyrega :
the readme tells you the new step "9" to export the tools path
[2018-09-01 17:09:27]
cantrepeat :
aagg, I had it working before lol. ok
[2018-09-01 17:09:33]
cantrepeat :
lemme see step 9
[2018-09-01 17:09:50]
jakub :
Python tool is doing that for you
[2018-09-01 17:11:54]
jakub :
I have also added info how to use it in Readme, should be ultra easy on wsl and Linux on VM
[2018-09-01 17:17:27]
cantrepeat :
Yeah, my issue is understanding linux paths IE is =~/home/etc
[2018-09-01 17:18:27]
mathieu.peyrega :
~ is a shortcut for /home/current_user
[2018-09-01 17:18:35]
mathieu.peyrega :
try cd ~ to check
[2018-09-01 17:21:34]
cantrepeat :
prefect
[2018-09-01 17:27:58]
cantrepeat :
After installing the NLD AGL mod I noticed the display will change from 20ft AGL to 20ft DTM digital terrain map. Is this supposed to happen?
[2018-09-01 17:34:56]
mathieu.peyrega :
did you installed the DTM tiles ?
[2018-09-01 17:35:26]
mathieu.peyrega :
as explained here : <https://nolimitdronez.com/new-nld-go-4122-instructions>
[2018-09-01 17:36:35]
mathieu.peyrega :
NLD app feature an height over DTM (digital terrain model) computation that show (it only an app display) the height over ground as computed from terrain model. This only trigger if you are too high or do not receive valid ultrasonic/VPS height measurements
[2018-09-01 17:37:31]
mathieu.peyrega :
when -DTM is shown on the app, this means that the value comes from DTM computation. -AGL means straight from the VPS/ultrasonic sensors and -QFE means delta altitude between home point and current point
[2018-09-01 17:38:56]
mathieu.peyrega :
so after 20 ft (or some value depending on ground nature / sensor) it should turn from -AGL to -DTM
[2018-09-01 17:55:06]
cantrepeat :
Yes, I did install them as per the link, but it didn't say anything about the display changing to DTM. I assume this is more accurate.
[2018-09-01 17:56:24]
mathieu.peyrega :
it's not that much a question of "accuracy" it's rather a question of height reference
[2018-09-01 17:57:15]
mathieu.peyrega :
if you want to keep to 200 ft to ground, the AGL sensor cannot help you because it's too short range
[2018-09-01 17:57:55]
mathieu.peyrega :
the default DJI mode is delta height with respect to home point, so if the terrain has slope, it's not the height above ground at flight point
[2018-09-01 17:58:20]
mathieu.peyrega :
this new mode helps you getting an height above ground even outside of VPS/ultrasonic sensor range
[2018-09-01 17:58:36]
mathieu.peyrega :
cu you guy's !
[2018-09-01 18:06:36]
cantrepeat :
ok, thanks, cya
[2018-09-01 18:22:47]
cantrepeat :
@mathieu.peyrega nice fix, getting way more sats at ground level and acquired faster too
[2018-09-02 04:43:01]
stevencarreramail :
Usually I am good at following instructions for these mods but it seems I cannot get this Frida modded DJI GO APP to install successfully. Can someone help me out with installing this app successfully? I have watched a video on YouTube numerous times, read the wiki how to do it numerous times and have no idea what I am doing wrong. I am running latest Windows 10, iTunes version 12.6.2, my iPad Air 2 is running iOS version 10.3.2. I have done everything on SuperImpacter (except the "Revoke Certificate" part as it is skipped in the video and when I try to login it won't let me so I skip to install the modded app) and after trying installing twice, it installs (always fails the first time, no clue why). I then add the required files (tweak and FridaGadget.config) via iTunes and then allow developer access via Device Manager on iPad. When I go to open the app, it opens for like a second and then closes. It does it every time I try to open it. Can someone help me out on what I might be doing wrong? Highly appreciate any help.
[2018-09-02 05:05:14]
jezzab :
perhaps ~ios_ipa_reversing would be better
[2018-09-02 05:14:13]
stevencarreramail :
Thank you, jezzab. I will ask on there.
[2018-09-02 20:21:57]
cantrepeat :
Are the folks that are using FC Patch also using 4.0300 on their RCs as well?
[2018-09-02 20:28:02]
good.win.alexs :
+1
[2018-09-02 20:54:24]
jakub :
I do @catalinaskirace, though can't say anything more than the fact that I was able to take off
[2018-09-02 20:56:10]
cantrepeat :
I didn't read anything about FC Patcher doing anything to RC so I assume there is no need to flash RC again.
[2018-09-03 05:51:29]
mathieu.peyrega :
Unless you use @jan2642 Silencio there is no mod on the RC. Stock 1.04.0300 will be perfect
[2018-09-03 09:42:27]
cantrepeat :
Ha, I bought Silencio right after HLD!
[2018-09-03 12:01:35]
xchwaw :
DUMLdore 3.12 beta can't work with 1.04.400 of mavic pro?I have flashed 1.03.700 three times with DUMLdore 3.12 beta but no changes.The version of mavic pro is still 1.04.400.
[2018-09-03 12:02:52]
cantrepeat :
I think the read_me says that it does not work with 4.0400
[2018-09-03 12:03:29]
cantrepeat :
[Will not work on Mavic Air or Mavic Pro/Platinum 01.04.0400]
[2018-09-03 12:03:56]
cantrepeat :
that is the release note for v3.10 and there's nothing in the notes that say it was changed in 3.12b
[2018-09-03 12:07:31]
xchwaw :
Thanks,I get it.I misunderstood the note:Will not work on Mavic Air or Mavic Pro/Platinum 01.04.0400 @catalinaskirace
[2018-09-03 12:07:38]
jezzab :
Downgrade to .100, .200 or .300 first, then u can go to anything
[2018-09-03 12:08:19]
cantrepeat :
@jezzab good to know!
[2018-09-03 12:08:52]
xchwaw :
@jezzab Great!
[2018-09-03 12:09:22]
cantrepeat :
So 3.1x will roll back so long as you go to one of those builds?
[2018-09-03 12:10:20]
jezzab :
Yes. You can officially even roll back to .100 with Asst2 (or DUMLdore)
[2018-09-03 12:11:38]
cantrepeat :
<--- just got spoon_fed!
[2018-09-03 12:14:55]
jezzab :
They released .400 a few hours after I released v3.10. Closing how I was rolling back. I can change it to roll back from .400 straight down with a modded exploit ive made but I havent bothered because then I have to had 2 different payloads and one is just used soley for .400
[2018-09-03 12:17:13]
cantrepeat :
I see it say 3.10 will not work with NFZ stage2.bin, does 3.12 support this or is 3.07 needed?
[2018-09-03 12:17:31]
jezzab :
It will never support it
[2018-09-03 12:17:53]
jezzab :
Use what ever version it was and do that. Im not supporting it
[2018-09-03 12:18:55]
jezzab :
Use the old version or NLD. Those are your options
[2018-09-03 12:19:29]
cantrepeat :
OK
[2018-09-03 12:20:56]
cantrepeat :
wasn't trying to step on any toes.
[2018-09-03 12:23:57]
ender :
Some people have humongous toes :wink:
[2018-09-03 12:24:42]
jezzab :
I made it for Mavic Pro, added the ability to load it into one version and handed it out with the caveat that i wont write documentation for it, support it, answer github issues etc. and there is none of those files on the DUMLdore repo. NLD asked me to write a reliable and more advanced version which supported more devices which I did.
[2018-09-03 12:26:16]
validat0r :
and you were thus rewarded with a sha1
[2018-09-03 12:26:26]
jezzab :
bwhahahaha
[2018-09-03 12:26:44]
validat0r :
so dont be ungrateful
[2018-09-03 12:27:09]
jezzab :
I'll get a tattoo of the SHA1
[2018-09-03 12:27:29]
validat0r :
:wink:
[2018-09-03 12:27:51]
validat0r :
its pretty long .. without line warps?
[2018-09-03 12:28:40]
jezzab :
its ok. It will look like a CRC32 most of the time but when im excited she will see the whole SHA1
[2018-09-03 12:28:49]
jezzab :
;)
[2018-09-03 12:28:51]
validat0r :
lol
[2018-09-03 12:29:28]
validat0r :
dont promise too much .. go for a md5 maybe
[2018-09-03 12:29:50]
jezzab :
lmao
[2018-09-03 12:30:23]
validat0r :
maybe once or twice a year .. with the help of a little blue pill ..
[2018-09-03 12:30:53]
cantrepeat :
O.o
[2018-09-03 20:47:24]
cantrepeat :
does 32 channel hack work on mavic?
[2018-09-03 20:59:11]
validat0r :
no. only on p4
[2018-09-03 21:00:07]
cantrepeat :
tnx
[2018-09-03 23:06:31]
kurdi80 :
9. Export PATH_TO_TOOLS variable
Run export PATH_TO_TOOLS=X where X is path where dji-firmware-tools directory is before next step. Example: export PATH_TO_TOOLS=/home/user/dji/tools when dji-firmware-tools directory is inside /home/user/dji/tools
[2018-09-03 23:07:01]
kurdi80 :
<@|><@|><@|><@|><@|><@|><@|><@|><@|><@|><@|><@|><@|><@|><@|><@|><@|><@|><@|><@|><@|>
[2018-09-03 23:09:44]
kurdi80 :
this step
[2018-09-03 23:11:30]
kurdi80 :
I don't know
[2018-09-03 23:12:01]
kurdi80 :
any help
[2018-09-03 23:12:17]
cantrepeat :
where did put dji-firmware-tools ?
[2018-09-03 23:12:20]
cantrepeat :
what folder
[2018-09-03 23:13:33]
kurdi80 :
You will be by cmd
[2018-09-03 23:13:44]
kurdi80 :
or bashed
[2018-09-03 23:14:24]
cantrepeat :
the export PATH_TO_TOOLS= is command you type in bash$ before you run the script
[2018-09-03 23:20:27]
cantrepeat :
you do not need to edit the script
[2018-09-03 23:24:37]
kurdi80 :
I can not do I need a detailed explanation
[2018-09-03 23:36:51]
cantrepeat :
I can not give a detailed instruction if you can not tell me where you installed the dji firmware tools
[2018-09-03 23:41:29]
kurdi80 :
in the desktop
[2018-09-03 23:42:36]
kurdi80 :
Do you mean dji firmware tools
[2018-09-03 23:43:27]
kurdi80 :
Mefisto files
[2018-09-04 00:04:37]
jezzab :
Just decoding that... one sec
[2018-09-04 00:04:50]
jezzab :
[2018-09-04 00:09:59]
cantrepeat :
@kurdi80 are doing this on a windows machine ??
[2018-09-04 00:28:36]
kurdi80 :
yes
[2018-09-04 00:30:42]
cantrepeat :
are you using WSL ? this script will not run in windows
[2018-09-04 06:10:23]
good.win.alexs :
@kurdi80 if you cant follow steps from github then better skip flashing FC
[2018-09-04 06:10:42]
good.win.alexs :
99% you will end up with FC break
[2018-09-04 06:11:21]
good.win.alexs :
Just wait for support in NLD, or any one-press-and-go solution by somebody
[2018-09-04 06:13:42]
good.win.alexs :
Looking on such conversations i have feeling that 10 old child is trying to build space rocket and fly to Mars
[2018-09-04 06:14:04]
good.win.alexs :
So just stop and keep calm
[2018-09-04 07:47:43]
cantrepeat :
@1313659 what was the error, I didn't get to see it.
[2018-09-04 07:54:04]
ender :
Elon, is that you ? :stuck_out_tongue:
[2018-09-04 08:00:04]
1313659 :
The error has been resolved, and download the new FC_patch_sequence_for_dummy_verify.sh can be passed.
[2018-09-04 08:01:04]
cantrepeat :
Cool, glad you got it working.
[2018-09-04 10:00:09]
good.win.alexs :
:shushing_face:
[2018-09-04 11:05:59]
cantrepeat :
Can you edit maxValue in flyc_param_infos? IE maxValue for go.home.height is 500 can you change that value to say 600 and then make default 600 and it work?
[2018-09-04 11:06:54]
validat0r :
probably .. but you might have to check if there are other places where the 500m limit exists, too, i.e. the app
[2018-09-04 11:07:29]
validat0r :
or you might not be able to change it back to a val >500
[2018-09-04 11:08:04]
cantrepeat :
never thought about going back, that could be an issue.
[2018-09-04 14:21:38]
good.win.alexs :
@catalinaskirace you can change max to different value
[2018-09-04 14:21:47]
good.win.alexs :
but it depends if this will work or not
[2018-09-04 14:21:59]
good.win.alexs :
it highly depends on real code that is working on FC
[2018-09-04 14:22:15]
good.win.alexs :
and also, may depends on other parameters
[2018-09-04 14:22:53]
good.win.alexs :
not all parameters are working at all, and not all are working as you expect - everything depends on chinese code quality :stuck_out_tongue:
[2018-09-04 14:23:39]
validat0r :
and chinese conception of engl. language .. cough cough portect
[2018-09-04 14:30:44]
cantrepeat :
so now I'm counting on the chinese connection when all I really want is the French connection? :stuck_out_tongue:
[2018-09-04 14:32:01]
jezzab :
What the FCUK?
[2018-09-04 14:32:04]
jezzab :
:p
[2018-09-04 14:33:36]
mathieu.peyrega :
a crypto key ?
[2018-09-04 14:33:48]
jezzab :
Tough crowd. French Connection UK (FCUK). Anyway, im out. Enjoy the beef
[2018-09-04 14:34:09]
validat0r :
enjoy your night hanging upside down
[2018-09-04 14:34:35]
cantrepeat :
lol FCUK! Nice, later man
[2018-09-04 14:34:48]
cantrepeat :
great movie, btw
[2018-09-04 14:35:48]
mefisto :
UK. The place where company can make success only because it's almost swearword.
[2018-09-04 14:38:21]
mathieu.peyrega :
in my workfield some compagnies have strange names. One of the major topographic equipment provider is "Topcon" and if you say it the french way, would mean "top asshole" ...
[2018-09-04 14:39:50]
mefisto :
In Poland, there was a juice company producing "Dick Black" bottles. Try to beat that!
[2018-09-04 14:40:44]
cantrepeat :
UK, spotted dick is meat you eat, right?
[2018-09-04 14:41:22]
cantrepeat :
sorry, guess it's a pudding
[2018-09-04 14:42:12]
cantrepeat :
ah is meat, well meat fat
[2018-09-04 14:42:17]
cantrepeat :
mutton fat
[2018-09-04 14:42:59]
cantrepeat :
dah fuk?
[2018-09-04 14:45:13]
mefisto :
I shared the picture, as I noticed it's completely not what you get if you gooogle "dick black juice".
[2018-09-04 14:50:28]
mefisto :
Wow, looks like the company even sponsored a soccer team.
[2018-09-04 14:50:39]
mefisto :
[2018-09-04 14:51:03]
mefisto :
that must be a valuable collectible now.
[2018-09-04 14:53:28]
validat0r :
I recently learned that "Supaporn" i both a popular Thai teeth-cleansing product **and** a female surname
[2018-09-04 14:55:17]
cantrepeat :
lol, I thought it was genre of films you liked?!
[2018-09-04 14:55:24]
validat0r :
that, too
[2018-09-04 15:08:14]
1313659 :
ah ah…o
[2018-09-04 15:08:39]
mathieu.peyrega :
oh, so you are recycling bricked drones into art :slightly_smiling_face:
[2018-09-04 15:10:26]
validat0r :
at least the mp1 on its back can precision land ..
[2018-09-04 15:10:58]
cantrepeat :
haha the MP2 kind of looks like the walker in avatar when he blows the canopy off and puts on the mask.
[2018-09-04 15:15:52]
fredmicrowave :
If you get offsprings i will take a couple o them ...
[2018-09-04 15:20:36]
1313659 :
@mathieu.peyrega yes:grinning:
[2018-09-04 15:22:32]
jakub :
oh come one... tag your pictures with #nsfw
[2018-09-04 15:22:43]
jakub :
what if there are kids in there :wink:
[2018-09-04 15:24:30]
1313659 :
they kids is air.
[2018-09-04 15:25:46]
mefisto :
oh. pity.
[2018-09-04 15:26:46]
mathieu.peyrega :
you know kids.... my wife is a farmer so our kids are used to see "natural things with cows and bull". 1 or 2 weeks ago, the oldest one (7 yo) asked me if I have the same "seed bag" as the bull have :slightly_smiling_face:
[2018-09-04 15:26:53]
mathieu.peyrega :
Didn't know really how to answer that
[2018-09-04 15:26:59]
kilrah :
LOL
[2018-09-04 15:27:31]
fredmicrowave :
:rolling_on_the_floor_laughing: Be honest...
[2018-09-04 15:27:33]
cantrepeat :
at their age shouldn't be post in bottle_feeding?
[2018-09-04 15:50:15]
ender :
@mathieu.peyrega: “YES my son, just bigger”
[2018-09-04 15:50:48]
ender :
Whats the Deal with MP2 Precision Landing, just missing in FW & App and will be delivered later or missing sensor or political will not to make it ?
[2018-09-04 15:53:28]
kilrah :
blade said removed and no plan to add back...
[2018-09-04 15:54:01]
ender :
Whoa, thats awful !
[2018-09-04 15:54:28]
ender :
I am still ready to buy the M2Z if it turns out to be hackable on all accounts but thats awful…
[2018-09-04 16:05:15]
mefisto :
I wonder if the drone firmware has it, and it's just a matter of making the checkbox visible in go app...
[2018-09-04 16:05:25]
kurdi80 :
Hi, I'm at step 10, calling the packer script but getting this error
[2018-09-04 16:05:49]
kurdi80 :
line 129: python2: command not found
[2018-09-04 16:06:13]
good.win.alexs :
Error says all what you need ;)
[2018-09-04 16:06:22]
good.win.alexs :
Just read it
[2018-09-04 16:07:05]
kurdi80 :
I have python 2.7.15, python 3.3 and pycrypto 2.6 already installed
[2018-09-04 16:07:29]
kurdi80 :
not sure where the issue is
[2018-09-04 16:07:45]
good.win.alexs :
Make symbolic link from py2 with nam python2 ;)
[2018-09-04 16:14:36]
kurdi80 :
OK. will try that. this will be my first time creating a symbolic link. hope it works. thanks.
[2018-09-04 16:17:59]
ender :
Yes thats what we expect, but the only reason i could think of is that it leads to a fatal problem, no kind of politics could cause this, right ?!
[2018-09-04 16:39:03]
kurdi80 :
I've created the symbolic link python2 in the python 2.7 folder pointing to the python.exe
[2018-09-04 16:39:20]
kurdi80 :
calling the script and it still gives me the same error :neutral_face:
[2018-09-04 16:44:20]
cantrepeat :
are you using windows WSL? If so, I've read that symbolic links in WSL sometimes do not work correctly.
[2018-09-04 16:46:50]
kurdi80 :
nope, using bash$ from ubuntu under win10
[2018-09-04 16:47:16]
cantrepeat :
in a virtual box?
[2018-09-04 16:47:31]
kurdi80 :
seems the script just cannot find the python2 command somehow although it's installed and I crated the symlink to python.exe
[2018-09-04 16:48:27]
cantrepeat :
I would try reinstalling python2
[2018-09-04 16:48:50]
kurdi80 :
no, not in virtual box. win10 has ubuntu bash$ support which I've used through all the steps so far. just getting this error now where the script on step 10 is not finding "python2" command
[2018-09-04 16:48:56]
kurdi80 :
did that a couple of times already.
[2018-09-04 16:49:09]
kurdi80 :
really frustrating. but won't quit :slightly_smiling_face:
[2018-09-04 16:50:54]
cantrepeat :
yeah, so you ARE using windows WSL Ubuntu which comes back to I've read that symbolic links in WSL sometimes do not work correctly.
[2018-09-04 16:51:04]
kurdi80 :
hmmmm
[2018-09-04 16:51:11]
kurdi80 :
then need a workaround
[2018-09-04 17:29:45]
good.win.alexs :
VirtualBox? :+1:
[2018-09-04 17:30:39]
good.win.alexs :
@kurdi80 python.exe??? Wtf???
[2018-09-04 17:31:16]
good.win.alexs :
You are working under Linux! There are no .exe executable!
[2018-09-04 17:32:14]
good.win.alexs :
Omg... I need some whisky, my admin soul is broken
[2018-09-04 17:37:43]
kilrah :
WSL works perfectly fine... but not if you do a big mess with it!
[2018-09-04 17:38:12]
kilrah :
install the linux python within WSL, not a link to the windows exe...
[2018-09-04 17:39:22]
cantrepeat :
@good.win.alexs one bourbon one scotch one beer
[2018-09-04 17:40:00]
kilrah :
!beer
[2018-09-04 17:40:06]
kilrah :
just fetched one
[2018-09-04 17:49:50]
artu-ole :
SOS, how important are /vendor/bin/ contents on the bird?
[2018-09-04 17:50:19]
artu-ole :
And is there something in the first place?
[2018-09-04 17:53:26]
validat0r :
if you didnt root your bird nor FC_patched it, no
[2018-09-04 17:53:35]
kilrah :
on what bird...
[2018-09-04 17:53:40]
artu-ole :
Mavic
[2018-09-04 17:54:21]
artu-ole :
Instead of push /vendor/bin/ overwrote it with push /vendor/bin
[2018-09-04 17:54:48]
artu-ole :
Is it empty by default?
[2018-09-04 17:55:56]
artu-ole :
cause I didn't get get a chance to check
[2018-09-04 17:57:30]
cantrepeat :
which step were you on?
[2018-09-04 17:57:46]
artu-ole :
Pushing 306 to bird
[2018-09-04 17:58:27]
cantrepeat :
well, if you are worried you could always flash back factory 4.0300 before you continue.
[2018-09-04 17:58:57]
artu-ole :
Alright, but otherwise it's clean on fresh bird?
[2018-09-04 17:59:33]
cantrepeat :
so instead of doing adb push wm220_0306_v03.02.44.07_20171116.pro.fw.sig /vendor/bin/ you did push /vendor/bin ??
[2018-09-04 18:00:00]
artu-ole :
Yep, one slash missing
[2018-09-04 18:00:23]
validat0r :
why dont you look on the bird whats up?
[2018-09-04 18:00:47]
artu-ole :
Well, that command pushes file with the new name
[2018-09-04 18:01:14]
artu-ole :
So just overwrote /vendor/bin/ with a file
[2018-09-04 18:01:19]
validat0r :
rly?
[2018-09-04 18:01:53]
artu-ole :
Yes
[2018-09-04 18:03:09]
artu-ole :
Bird is running, kinda scared to turn it off
[2018-09-04 18:03:19]
cantrepeat :
I only have 3 files in my vendor/bin after a good flash dummy_verify, original_dji_verify and check_state
[2018-09-04 18:03:34]
cantrepeat :
It wont take you long to start over from a fresh factory flash.
[2018-09-04 18:04:05]
artu-ole :
Okay, hope that folder is not used for flashing :D
[2018-09-04 18:04:09]
cantrepeat :
which is what I would probably do. Mostly because I don't know what the effect would be from wiping the direcotyr
[2018-09-04 18:04:48]
artu-ole :
Is that just a dir, not symlink to somewhere else?
[2018-09-04 18:05:10]
cantrepeat :
I couldn't tell you for sure.
[2018-09-04 18:06:04]
artu-ole :
Could you do 'ls -la' in '/vendor/'?
[2018-09-04 18:07:00]
artu-ole :
Is /bin/ a 'd' or a an 'l'?
[2018-09-04 18:07:40]
cantrepeat :
yeah hold on, I just check vendor/bin
[2018-09-04 18:07:51]
artu-ole :
Thank you!
[2018-09-04 18:08:17]
cantrepeat :
vendor has 3 sub directories
[2018-09-04 18:08:21]
cantrepeat :
bin
[2018-09-04 18:08:39]
cantrepeat :
firmware and lost+found
[2018-09-04 18:08:56]
cantrepeat :
firmware is full of stuff
[2018-09-04 18:09:00]
artu-ole :
Yeah, i just fucked 'bin'. All are 'd'?
[2018-09-04 18:09:26]
artu-ole :
First symbol on the line after ls -la
[2018-09-04 18:09:31]
cantrepeat :
lost and found is empty
[2018-09-04 18:10:20]
cantrepeat :
I'd reflash the bird to factory 01.04.0300 to be safe.
[2018-09-04 18:10:40]
artu-ole :
Yeah, suppose I'll do that
[2018-09-04 18:11:07]
artu-ole :
Thank you for the prompt help, your mvp
[2018-09-04 18:12:12]
cantrepeat :
na, just an old retiree hanging out
[2018-09-04 18:12:53]
cantrepeat :
the second or third time you do this it goes much faster! ask me how I know
[2018-09-04 18:14:49]
artu-ole :
Thanks again! Not my first rodeo with shell or adb, but mistakes like that are so easy to make
[2018-09-04 18:15:23]
cantrepeat :
indeed they are
[2018-09-04 18:16:03]
validat0r :
are you really saying, adb push xzy /vendor/bin overwrites an existing directory /vendor/bin/?
[2018-09-04 18:17:10]
artu-ole :
Yes it does, second parameter is new file location, if it's not a folder then it interorets it as a new filename
[2018-09-04 18:17:26]
artu-ole :
interprets*
[2018-09-04 18:22:20]
validat0r :
dont think so. doesnt do that on my android phone. it just does the intuitive thing and puts the file in bin/
[2018-09-04 18:22:54]
validat0r :
so if he has now a "bin" file in /vendor, there was no "bin" dir or file in /vendor in the first place.
[2018-09-04 18:24:31]
kilrah :
the / or no / should not matter. As standard if you move/push something to a name that's an existing directory, it goes in that directory.
[2018-09-04 18:25:59]
kilrah :
just imagine the havoc and destruction potential if it wasn't that way... no way someone could have implemented that.
[2018-09-04 18:27:16]
artu-ole :
it did happen on my bird. win 10, powershell, and I might have an old `adb` version.
[2018-09-04 18:27:22]
kilrah :
the trailing slash is often there in instructions just becasue the autocomplete puts it in (so you can type the next bit of the path straight away without manually entering a slash first)
[2018-09-04 18:28:04]
kilrah :
you confirmed bin was a directory for you. So no issue.
[2018-09-04 18:28:49]
artu-ole :
It was not a dir after that push without slash. It was 306 named `bin` in `vendor` folder
[2018-09-04 18:29:13]
artu-ole :
reflashed it and all back to normal, however
[2018-09-04 18:29:25]
kilrah :
okay
[2018-09-04 18:29:38]
kilrah :
and is there anything in the bin dir?
[2018-09-04 18:29:51]
kilrah :
(i'm still on 700)...
[2018-09-04 18:29:59]
artu-ole :
not, it's empty, so was no harm done before either I suppose
[2018-09-04 18:31:58]
artu-ole :
will move on with the steps, let's see what else I can screw
[2018-09-04 18:41:05]
mathieu.peyrega :
no need to be scared, /vendor/bin/ is an "OG" dir
[2018-09-04 18:41:21]
mathieu.peyrega :
not actually used by DJI stuff, iirc, I even created it manually
[2018-09-04 19:10:40]
artu-ole :
yeah, I thought mkdir might work as well, just was worried it's a symlink to some place else.
[2018-09-04 19:29:07]
cantrepeat :
glad to learn it's not to worry about.
[2018-09-04 20:48:05]
kurdi80 :
I done
[2018-09-04 20:48:13]
kurdi80 :
100%
[2018-09-04 20:51:47]
kurdi80 :
DJI_FC_Patcher
[2018-09-04 20:57:25]
validat0r :
nice ..
[2018-09-04 21:14:59]
cantrepeat :
Now comes how come I can't build a second bin file?
[2018-09-04 21:29:11]
validat0r :
@catalinaskirace wants to know why he cant repeat? scnr
[2018-09-04 21:33:52]
cantrepeat :
^nice!
[2018-09-04 22:00:04]
validat0r :
some error msg would be helpful for assistance
[2018-09-04 22:09:31]
cantrepeat :
I was joking.
[2018-09-04 22:15:06]
validat0r :
good one
[2018-09-04 23:43:53]
739461411 :
may i ask a question ？how to run .sh file on win 10？otherwise, p4 does't have the vendor/bin director. just have vendor,how to do ？
[2018-09-04 23:44:09]
739461411 :
may i ask a question ？how to run .sh file on win 10？otherwise, p4 does't have the vendor/bin director. just have vendor,how to do ？
[2018-09-04 23:44:24]
739461411 :
may i ask a question ？how to run .sh file on win 10？otherwise, p4 does't have the vendor/bin director. just have vendor,how to do ？
[2018-09-05 01:16:50]
cantrepeat :
That brings up something else I was also wondering about. In NLD GO 4.1.22 CS you set "units" to imperial mph and everything is displayed in miles or MPH, but both RTH and max altitude still use meters. Is that hard coded in the app and the birds firmware?
[2018-09-05 03:40:17]
quad808 :
I am pretty sure thats how the GO apps display normally. I have mine set to imperial, and same thing. I believe that it has always been this way.
[2018-09-05 08:45:47]
weprul0r :
@quad808 one question: i've set the height limit value in fc to 10000 and "flying_limit_height_limit_enabled" to 2. i tried to put something like 2000 in the nld go, but after setting it jump's back to 500. so i should set the height_limit_enabled back to 1 and the height limit value below 10000 in the fc and it should work?
[2018-09-05 08:58:15]
ender :
@kilrah: could you see any reason behind disabling that feature besides that it is flawed on the M2(P/Z) ?? I cannot. On the smaller drones its clearly political but on the M2(P/Z)
[2018-09-05 09:11:15]
1313659 :
Need to be modified here? Unlock the height limit, is it the default value needs to be changed to 0？
[2018-09-05 09:11:42]
cantrepeat :
It always seems to default back to 500 for me as well. Since it is in meters that is about 1640 feet and I've had no reason to fly that high to test it. Also, @quad808 had pointed out that the max setting on that param should be no more then 9000. In the NLD 4.1.22 the display shows 20-9000.
[2018-09-05 09:12:24]
cantrepeat :
@1313659 that should be 1=true 0=false
[2018-09-05 09:16:23]
1313659 :
But here I have changed to 2, still can't exceed the 500 meter limit.
[2018-09-05 09:16:55]
good.win.alexs :
guys, just to know. zoo is talking about p4p v2.0
[2018-09-05 09:17:39]
good.win.alexs :
with height_limit_enabled = 2 it is still rejecting to fly over 500m
[2018-09-05 09:17:58]
cantrepeat :
Thanks @good.win.alexs, @1313659 I don't have a p4p so probably can't help much.
[2018-09-05 09:18:29]
good.win.alexs :
as far as i know, on normal p4p it works as on other dji crafts
[2018-09-05 09:18:41]
good.win.alexs :
problem is related only to this newest V2.0
[2018-09-05 09:19:38]
good.win.alexs :
i did cook FC firmware for zoo with few parameters changed, but still it is not allowing to fly high. maybe “limit_height” parameter has some relation
[2018-09-05 09:20:15]
1313659 :
I think so, there is no such thing as "limit_height" in mavic.
[2018-09-05 09:23:18]
cantrepeat :
I think you are correct, just a distance limit which is on or off and can be set in params.
[2018-09-05 09:30:06]
cantrepeat :
there is a fly_limit_height in MPP 04.0300
[2018-09-05 09:30:53]
cantrepeat :
I set it to 9k but haven't tested above 500 feet.
[2018-09-05 09:31:24]
cantrepeat :
I set it to match the NLD 4.1.22
[2018-09-05 09:33:38]
cantrepeat :
I wonder what g_config.flying_limit.roof_limit_enable controls
[2018-09-05 09:34:33]
cantrepeat :
to me roof = ceiling as in ceiling limit must not be or someone else a long time ago would have discussed it.
[2018-09-05 11:48:38]
kilrah :
I would suspect it's just not reliable enough and they got too many user complaints/crashes due to it...
[2018-09-05 17:51:32]
quad808 :
Remember that you need to change 4 entries to override Height limits:
[2018-09-05 17:57:25]
quad808 :
[2018-09-05 18:24:50]
cantrepeat :
Thanks quad, is there a value to change that will stop 4.1.22 from defaulting back to 500 when you change height in GO? Or is that control by the RC and not the birds firmware?
[2018-09-05 18:25:17]
cantrepeat :
or the app or all 3?
[2018-09-05 21:32:20]
quad808 :
Controlled by the app and firmware. If you do a custom FC, now you control it. I prefer leaving the altitude restriction on, but maxValue set at 9000, that way it is still functional. Want to let someone fly? Set the height to something low so they don't get crazy high.
[2018-09-05 21:39:51]
weprul0r :
Good point. I will enable the limit again and set the max height in the GO app instead. Thanks, @quad808!
[2018-09-05 21:55:08]
mathieu.peyrega :
[2018-09-05 21:55:22]
mathieu.peyrega :
@catalinaskirace: this is the parameters config file i'm using
[2018-09-05 21:55:45]
mathieu.peyrega :
check / diff it with the original Mavic parameters config file to see what I've modded.
[2018-09-05 21:56:10]
mathieu.peyrega :
With the parameters in this file and NLD App, you can set an alt > 500 and it will not return to 500
[2018-09-05 21:56:44]
mathieu.peyrega :
if you set an app > 500 in the app and it returns to 500, this means that your FC is not correctly patched (parameters) to allow alt > 500
[2018-09-05 21:57:15]
cantrepeat :
@mathieu.peyrega What is this?? "name" : "g_config.api_entry_cfg.cheat_backdoor"
[2018-09-05 21:57:26]
mathieu.peyrega :
(you can use the file as is for generating a patched Mavic FC. Just rename the file correctly before generating)
[2018-09-05 21:57:45]
mathieu.peyrega :
no idea. I've not been changing this parameter
[2018-09-05 21:58:44]
cantrepeat :
Tnx I'll do a diff check from mine to yours.
[2018-09-05 22:00:09]
cantrepeat :
well, anything backdoor turned on aint good lol
[2018-09-05 22:10:25]
cantrepeat :
winmerge!!
[2018-09-05 22:11:36]
cantrepeat :
in the small portion of your param file that you pasted I only have one diff and it's height limit 1 vs 2
[2018-09-05 22:12:30]
cantrepeat :
oh, wait I didn't copy it all lol
[2018-09-05 22:17:52]
cantrepeat :
Someone school me on "name" : "battery_type"
[2018-09-05 22:18:04]
cantrepeat :
I have 1 and you have 2 Matioupi
[2018-09-05 22:18:32]
cantrepeat :
Likewise with "name" : "dji_bat_level_1"
[2018-09-05 22:25:02]
validat0r :
1 is smart battery, 2 is non-dji battery.
[2018-09-05 22:25:34]
validat0r :
so you can drain the bat to the very last drop
[2018-09-05 22:25:46]
cantrepeat :
ah ok
[2018-09-05 22:26:46]
validat0r :
you might need that if you want to go higher than your usual 500 yards or stuff
[2018-09-05 22:27:37]
cantrepeat :
so even with a dji battery if I set to 2 it will just drain the battery all the way down?
[2018-09-05 22:27:44]
validat0r :
yeah
[2018-09-05 22:27:48]
cantrepeat :
what about bat level 1
[2018-09-05 22:28:06]
validat0r :
thats smart battery setting .. RTH will kick in at DJIs convenience
[2018-09-05 22:31:16]
validat0r :
besides the 10%/30% setting the AC is monitoring the time it might need to RTH depending on its height and distance. so RTH might kick in even at 50-60% bat.
[2018-09-05 22:32:11]
validat0r :
but if you know you can be back at the barn in like 10% bat, that's just a nuisance
[2018-09-05 22:33:15]
weprul0r :
Is "enable_smart_bat_landing_portect = 0" also needed for this?
[2018-09-05 22:33:21]
validat0r :
yep
[2018-09-05 22:34:31]
weprul0r :
Ok, thanks :+1:
[2018-09-06 02:29:55]
kurdi80 :
You must be root yor p4
[2018-09-06 02:33:27]
kurdi80 :
And you must actevid linx commend on the win 10
[2018-09-06 22:50:58]
edisonbattery :
my boss gave me a Mavic 2 Zoom today for my B-Day. I'm truly blessed. Very much feeling the love.
[2018-09-07 00:32:36]
andrwho25 :
whoa !~
[2018-09-07 00:32:41]
andrwho25 :
that’s amazing !
[2018-09-07 00:32:49]
andrwho25 :
happy birthday :slightly_smiling_face:
[2018-09-07 06:56:56]
ender :
Great Boss !
[2018-09-07 07:48:26]
jackjay :
!apk
[2018-09-07 08:05:50]
artu-ole :
Happy to report that after that initial screw up couple of days ago fc patching went smooth from there. I've done most of the steps on win10. The only time needed linux was for bash script in step 10 and that went ok on WSL. If that was written in python as well - all could be done on win natively. Too bad my python mojo ain't good enough for that.
[2018-09-07 08:26:53]
good.win.alexs :
@edisonbattery so, where should i send my CV? :smile:
[2018-09-07 08:38:54]
ender :
@good.win.alexs: [money-for-nothing@Dire-Straits.com](mailto:money-for-nothing@Dire-Straits.com)
[2018-09-07 09:08:12]
mathieu.peyrega :
or @chicks_for_free.com :slightly_smiling_face:
[2018-09-08 16:40:37]
neelix.one :
!apk
[2018-09-09 15:18:22]
weprul0r :
If i use a modded FC config (disabled nfz), do I also have also additionally remove the NFZ database?
[2018-09-09 15:18:46]
validat0r :
what bird, what firmware?
[2018-09-09 15:19:08]
weprul0r :
Mavic Pro, V01.04.0300.
[2018-09-09 15:20:08]
validat0r :
not entirely my department, but you'd do a stage2.bin flash, which patches a binary on the AC and installs an emtpy nfz db
[2018-09-09 15:21:26]
weprul0r :
I deleted the NFZ directory, but then the bird don't let me take off "version mismatch".
[2018-09-09 15:21:46]
weprul0r :
I copied back then the 0905 module, and it's working again.
[2018-09-09 15:22:00]
validat0r :
that way the AC doesnt have any nfz, so it doesnt object to any flights in nfz. plus you'd need a modded GO ap, as in deejayeye or NLD
[2018-09-09 15:22:15]
validat0r :
you dont delete anything on the bird.
[2018-09-09 15:22:20]
validat0r :
you patch
[2018-09-09 15:23:25]
weprul0r :
I already have a NLD go app, only the database on the bird is currently "01.00.01.07".
[2018-09-09 15:23:42]
validat0r :
hmm, version is not so much an issue but the content
[2018-09-09 15:25:16]
weprul0r :
Ok, so I should try to patch stage2.bin with DUMLdore again. But how I know, that it's was successfull? The version doesn't change?
[2018-09-09 15:25:57]
weprul0r :
I can try it in a NFZ, of course. But I don't have one near my home :wink:
[2018-09-09 15:27:31]
validat0r :
get the nfz.db off of the AC and open it with a sqlite3 app. then look into the tables. if one has like 10,000 entries, you're not good
[2018-09-09 15:29:38]
weprul0r :
Ok, will do. Thanks!
[2018-09-09 15:51:43]
weprul0r :
Ok, database version number changed to "01.00.01.08" and the database looks empty in a sqlite browser. Great, thank you!
[2018-09-09 16:43:31]
cantrepeat :
After you flash the mavic with your FC Patched .04.0300 you need to flash the stage2 , get the one on this page.
[2018-09-09 16:44:28]
cantrepeat :
I use dumldore 3.03 get it from releases here --> <https://github.com/jezzab/DUMLdore/releases>
[2018-09-09 16:44:55]
weprul0r :
I already did that. But thanks :slightly_smiling_face:
[2018-09-09 16:45:54]
cantrepeat :
did you hold down the ALT key and load your firmware and flash that stage2.bin?
[2018-09-09 16:48:24]
weprul0r :
@catalinaskirace Yes.
[2018-09-09 16:48:45]
cantrepeat :
did you check to see if airmap_geofence_polygons is 0, this will tell you if the NFZ have been removed from the bird
[2018-09-09 16:49:20]
weprul0r :
Is this a parameter? No, i didn't checked that yet.
[2018-09-09 16:51:29]
cantrepeat :
it is a field in the nfz.db the database that contains the NFZ
[2018-09-09 16:51:40]
validat0r :
No. It's the table in the db
[2018-09-09 16:52:05]
cantrepeat :
table*
[2018-09-09 16:53:03]
cantrepeat :
ah, sorry, didn't see where @ilovemynexus4 had posted the info on the db
[2018-09-09 16:53:46]
cantrepeat :
I'm a day late and dollar short!
[2018-09-09 16:54:39]
weprul0r :
:smile:
[2018-09-09 16:55:13]
weprul0r :
Table "airmap_geofence_polygons" is empty.
[2018-09-09 16:55:47]
cantrepeat :
cool, if it shows 0 then you are good
[2018-09-09 17:00:19]
weprul0r :
Looks good to me?
[2018-09-09 17:29:24]
validat0r :
Looking good
[2018-09-09 17:50:31]
good.win.alexs :
So, even with changed parameters in FC, nfz will keep working if full database is present on bird?
[2018-09-09 17:50:37]
good.win.alexs :
Is it correct?
[2018-09-09 17:51:03]
validat0r :
i'm not sure anyone tested that to the full extend
[2018-09-09 17:51:29]
validat0r :
you'd need a guy who can frequently test in an nfz
[2018-09-09 17:52:16]
validat0r :
with patched app **and** stage2.bin patch I guess you can omit the old school parameter hack
[2018-09-09 20:24:32]
good.win.alexs :
@ilovemynexus4 i have one such guy. with HackRF working as spoofer
[2018-09-09 20:24:42]
good.win.alexs :
and first tests are not very promising
[2018-09-09 20:24:50]
validat0r :
in what way?
[2018-09-09 20:25:02]
good.win.alexs :
still, going to recheck his setup tomorrow, maybe he did some mistakes
[2018-09-09 20:25:19]
good.win.alexs :
disabled NFZ only in FC parameters (patched FC firmware)
[2018-09-09 20:25:31]
good.win.alexs :
so nfz database is in place, NLD go is used
[2018-09-09 20:25:58]
validat0r :
get him here :slightly_smiling_face:
[2018-09-09 20:26:22]
validat0r :
so he didn't stage2.bin?
[2018-09-09 20:27:48]
good.win.alexs :
correct
[2018-09-09 20:28:08]
good.win.alexs :
with removed nfz db - not big sense in parameters changes
[2018-09-09 20:28:46]
good.win.alexs :
so, main question was if there is any effect on nfz-related parameters - and as of now, result is - no sense
[2018-09-09 20:28:58]
validat0r :
ah, ok
[2018-09-09 20:28:58]
good.win.alexs :
but, still, experiment i ongoing, so will report there :slightly_smiling_face:
[2018-09-09 20:31:10]
cantrepeat :
goodwin_c did you get an RF meter to test boost yet?
[2018-09-09 20:33:25]
good.win.alexs :
no, not yet
[2018-09-09 20:33:45]
good.win.alexs :
busy with Go atm. trying to fight with Secneo )))
[2018-09-09 20:34:09]
good.win.alexs :
and starting to hate authors of it )))
[2018-09-09 20:34:31]
good.win.alexs :
but it is not so bulletproof as it may look from first view
[2018-09-09 22:16:12]
cantrepeat :
nice, good luck cracking that!!!
[2018-09-09 22:17:27]
cantrepeat :
is there a stand alone program for reading flight data, FLYxx.DAT files other then CsvView. Something graphical?
[2018-09-09 22:53:14]
cantrepeat :
Igor Pro
[2018-09-09 23:06:31]
quad808 :
guys...lets clear up NLD and the custom FC and the NLD NFZ patch. If you use custom FC, and turn off NFZ in params, leaving NFZ alone on bird and using stock app, just like .0700, but worse, since you will get loads of warnings. Load up stock 01.04.0300. Run NLD NFZ patch. This zero's the NFZ DB. Now flash custom FC, and if using NLD GO 4.1.22, set Altitiude max in params to 9000, and turn off NFZ, even though you removed the db from the bird with the NLD NFZ patch. You can't just go in and delete the db like in .0700. Now you should have a custom fc with DFZ turned off, no nfz db to give you warnings about. Now you should be using the NLD GO 4.1.22 and can set your altitude at up to 9000, and it works on anything from zero to 9000. If you just turn it off, and use NLD GO 4.1.22, that function no longer works, but I leave it on, so you can still set limits if you want/need to. Best of both IMO. If you are using STOCK go remember that it has a NFZ db in it, so even if your bird is clean, you will still get warnings from the apps db, but since you turned it off in params, you can still fly. IMO no one should be using a stock GO app unless the GO app doesn't support your bird.
[2018-09-09 23:10:08]
cantrepeat :
Thanks Quad, so run the stage2.bin before flashing the FC, I was doing that in reverse. Flash FC patched firmware then run the NFZ stage2.
[2018-09-09 23:10:43]
validat0r :
Doesn’t matter which way
[2018-09-09 23:13:04]
cantrepeat :
So I can do it either way and if after all is set I later flash a new FC Patch FW and don't have to redo stage2 since the FW isn't a full FW.
[2018-09-09 23:13:46]
validat0r :
Stage2 affects stuff which is in modules 905 and 801 ... if you flash theses modules you should reapply it
[2018-09-09 23:14:31]
validat0r :
But if you flash fc patch with only modules 305/306 .. you’re good
[2018-09-09 23:14:54]
cantrepeat :
Sweet
[2018-09-12 07:06:46]
1313659 :
FC_patch_sequence_for_og_verify.sh and FC_patch_sequence_for_dummy_verify.sh 306 modules packaged by two scripts, what difference do they have?
[2018-09-12 07:53:42]
mathieu.peyrega :
@1313659: FC_patch_sequence_for_og_verify generate a ready to flash file for another flashing method than dummy_verify, related to @jan2642 og_verify tool. Without a detailled readme, I strongly discourage you trying to use it. In any case, NEVER try flashing with the dummy_verify.sh script a file generated with FC_patch_sequence_for_og_verify. That would be a 100% guaranteed bricked device
[2018-09-12 07:57:04]
1313659 :
ok
[2018-09-12 07:58:05]
massimo.ardizzone :
matioupi i have semplified you procedure, for my friends, i have maked 4-5 microfirmware for people. their need only copy 2 files in /vendor/bin , mount bind, and flash. :-)
[2018-09-12 07:58:49]
mathieu.peyrega :
right, but distributing patched files will violate DJI IP rights... that's why I went for a patcher tool
[2018-09-12 07:59:33]
massimo.ardizzone :
sure only for private friend
[2018-09-12 08:09:53]
ender :
@massimo.ardizzone You could just create a patcher and ask people to retrieve the original files for themselves: EASY
[2018-09-12 08:10:31]
massimo.ardizzone :
ok thanks boys
[2018-09-12 08:12:59]
1313659 :
In P4PV2.0: g_config.flying_limit.height_limit_enabled: 2
Limit_height_rel: 3000
Limit_height_abs: 3000
Limit_height_abs_without_gps: 3000
Why can't I exceed the 500 meter limit?
[2018-09-12 08:16:19]
good.win.alexs :
@mathieu.peyrega patching FW will be violation as well :stuck_out_tongue: anyway, we all will burn in hell at the end :smile:
[2018-09-12 08:26:48]
cantrepeat :
I like the heat!!! :smile:
[2018-09-12 08:29:14]
cantrepeat :
@1313659 Just guessing here, what GO app are you using? Does it need patching?
[2018-09-12 08:45:50]
1313659 :
The official download of the latest version of go, should have nothing to do with go, P4 can be successful according to this modification.
[2018-09-12 08:47:33]
1313659 :
P4P is also OK, that is, P4PV2.O does not work.
[2018-09-12 08:49:41]
cantrepeat :
OK, I just thought the APP had a copy of NFZ in it as well. At least I remember reading that. Too much bee and not enough coffee for me maybe.
[2018-09-12 08:51:41]
1313659 :
I changed the maximum height to 2999. The default value is 888, but it still cannot be exceeded.
[2018-09-12 08:53:52]
1313659 :
default should be 999
[2018-09-12 09:03:16]
mathieu.peyrega :
no idea... i don't own a P4PV2 myself so I cannot help your there...
[2018-09-12 09:03:48]
mathieu.peyrega :
still, that's new that the app read the max value from the FC ratehr than hard-coded. Is it iOS or Android and which version ?
[2018-09-12 09:05:17]
good.win.alexs :
@mathieu.peyrega he did set default value for height param
[2018-09-12 09:05:26]
good.win.alexs :
so it’s ok that app shows this value
[2018-09-12 09:05:37]
mathieu.peyrega :
but not the 20~2999 label
[2018-09-12 09:05:40]
good.win.alexs :
this is pretty simple check to see that your FC changes were applied
[2018-09-12 09:05:53]
good.win.alexs :
ah, you are about label…
[2018-09-12 09:06:01]
good.win.alexs :
yes, for label this is kinda strange )))
[2018-09-12 09:06:05]
mathieu.peyrega :
I know for the default value, but the allowed range is hard-coded in previous versions (4.1.22)
[2018-09-12 09:06:18]
good.win.alexs :
i think this is newer go
[2018-09-12 09:06:32]
good.win.alexs :
you are right about 4.1.22
[2018-09-12 09:17:44]
1313659 :
@mathieu.peyrega Is iOS 4.3.1
[2018-09-12 09:21:26]
1313659 :
P4PV2.0 sets the height limit to 30 meters and cannot exceed it, but the P4P setting 30 meters can exceed 30 meters.
[2018-09-12 09:22:42]
mathieu.peyrega :
30 meters ? this is novice mode... are you sure you unselected it (maybe you shouldn't actually)
[2018-09-12 09:24:13]
1313659 :
I set the maximum height limit in DJIGO4.
[2018-09-12 09:26:39]
1313659 :
As long as P4P sets g_config.flying_limit.height_limit_enabled: 2, the height limit setting value of DJIGO4 will be invalid.
[2018-09-12 10:04:56]
good.win.alexs :
there is Beginner mode
[2018-09-12 10:04:58]
good.win.alexs :
@1313659
[2018-09-12 10:05:07]
good.win.alexs :
check that it is disabled
[2018-09-12 10:05:21]
good.win.alexs :
without beginner mode it should be 500 or more (if hack works)
[2018-09-12 10:05:45]
good.win.alexs :
30m is set forcibly by Beginner mode, as Matioupi said
[2018-09-12 10:25:52]
cantrepeat :
After a flash I sometimes get stuck in beginner mode even when it is shut off in the app. I have to start the app and bird, turn on beginner mode and fly a bit. Land and turn everything off while leaving the beginner mode on. Then restart everything and fly the bird up to the beginner limit and then shut off beginner once it reaches the alt limit. From there I can fly normally.
[2018-09-12 10:34:13]
mathieu.peyrega :
maybe the app / FC is smart and auto switch to beginner mode for some users
[2018-09-12 10:34:33]
mathieu.peyrega :
:grin:
[2018-09-12 10:38:08]
1313659 :
@good.win.alexs The beginner mode has been turned off
[2018-09-12 10:42:26]
1313659 :
The default maximum height is 999 meters, and the height can only be raised 500 meters.
[2018-09-12 11:26:06]
1313659 :
Just flew outside, still cannot exceed 500 meters, the indication also has reached the maximum height limit.
[2018-09-12 11:35:24]
739461411 :
how?step 13 does't need dumldore？ when i use dumldore to flash dji_system.bin,it going wrong .thanks.
[2018-09-12 11:36:17]
739461411 :
how?why i modify my friend 's p4, does't ok.step 13 going wrong .
[2018-09-12 12:05:04]
zeroim :
@1313659 how did you do it？mod the app，or firmware、assistant2？
[2018-09-12 13:00:20]
xchwaw :
I've flashed a mixed module(305 and 306 modules of 700 mixed with 1.04.0300 ) to my mavic pro with DUMLdore 3.12 beta.I used DUMLRacer to root it,but it have being waiting here for at least 10 minutes:"Race 2 has started".The DUMLRacer can't work with a mixed module?Do I need to roll back to stock 1.04.0300?
[2018-09-12 13:10:46]
kilrah :
DUMLRacer exploits a race condition. It may or may not work on a given attempt, you must run it many times until it does.
[2018-09-12 13:40:30]
xchwaw :
OK,I will try 5+ times since 2 times done and no response.thanks @kilrah :slightly_smiling_face:
[2018-09-12 15:08:24]
xchwaw :
DUMLRacer shows I win,told me to reboot the bird.After rebooted,the adb shell couldn't find any device.Then I ran DUMLdore 3.10,clicked the button "ADB enable",when rebooted the bird,the adb shell shows:"error: no devices/emulators found."
[2018-09-12 15:09:54]
validat0r :
Sometimes "adb root" helps
[2018-09-12 15:10:50]
validat0r :
Or open cmd line as admin/root .. Or "adb kill-server" .. Or different machine.
[2018-09-12 15:18:46]
cantrepeat :
adb kill-server
[2018-09-12 15:18:54]
cantrepeat :
sudo adb start-server ??
[2018-09-12 15:23:13]
cantrepeat :
@xchwaw I've also heard that if you on windows other the 10 you may need to unplug the bird from the computer and replug it after it reboots. Something about the way win7 and 8 handle usb ports
[2018-09-12 15:23:25]
cantrepeat :
you're*
[2018-09-12 15:34:19]
xchwaw :
Open cmd line as admin, adb root,adb kill-server,adb start-server, all these commands have been tried.And plugged to another [computer.No](http://computer.No) device found again.Maybe the bird has not been rooted correctly.
[2018-09-12 15:35:03]
xchwaw :
The OS is windows 7 64bit.
[2018-09-12 15:42:35]
cantrepeat :
are you using win-bash as your terminal?
[2018-09-12 15:43:39]
cantrepeat :
I didn't use dumldore's bash window so I can't really tell you what to do in there.
[2018-09-12 15:46:35]
cantrepeat :
Likewise, I believe jcase has said dumbracer is end of life and has written a new root ubersploit
[2018-09-12 15:47:16]
cantrepeat :
someone will correct me if I'm wrong but I thought it was jcase. <https://github.com/CunningLogic/UberSploits/releases>
[2018-09-13 00:46:18]
xchwaw :
Thank you @catalinaskirace,I will try some.
[2018-09-13 01:48:00]
xchwaw :
My mavic pro was rooted.The AndroidUsbDeviceClass(WinUSB) driver wasn't installed correctly,and I reinstall it just now,so my bird can be finded by the adb shell.Thanks for all. @kilrah @ilovemynexus4 @catalinaskirace :grin:
[2018-09-13 01:51:54]
cantrepeat :
Yeah, I guess I should have asked if you had the exclamation mark in the device manager. Glad you got it working!
[2018-09-13 01:58:28]
xchwaw :
You are right,there was a exclamation mark in the device manager before I reinstalled the driver.:smiley:
[2018-09-13 02:00:58]
cantrepeat :
Yeah, I went through that as well. Had to manually select a driver for it.
[2018-09-13 17:02:25]
ender :
Guys as i am a bit out of loop with MP1 developments (because of Air, then Anafi): Can a MP1 on newest FW be downgraded to famous .700 ?!
[2018-09-13 17:08:41]
ender :
Ohh NLD Birdmap says “YES” :wink:
[2018-09-13 17:17:08]
cantrepeat :
You can but why would you?
[2018-09-13 17:23:29]
kilrah :
yes but not necessary anymore :stuck_out_tongue:
[2018-09-13 18:22:52]
ender :
oh yes i saw, everything fine except 500m limit which only few need…Fine
[2018-09-13 18:24:26]
cantrepeat :
You can pass the 500m or 400ft limit using FC Patcher and 01.04.0300
[2018-09-13 18:25:49]
ender :
ah okay.
[2018-09-13 19:32:14]
kilrah :
04.300 lets you do more than has ever been possible before
[2018-09-13 23:24:35]
erwin :
does fcc boost app work with all stock and latest up to date fw?
[2018-09-14 06:34:13]
royeiror :
Is anyone who understands the FC patcher online?
[2018-09-14 07:21:12]
validat0r :
Whatchawannano?
[2018-09-14 07:52:17]
royeiror :
I'm constantly having errors running the script, when the step that asks to do the adb commands
[2018-09-14 08:20:43]
validat0r :
Does adb detect your bird?
[2018-09-14 08:20:52]
royeiror :
yep
[2018-09-14 08:20:54]
validat0r :
Make "adb devices"
[2018-09-14 08:21:21]
royeiror :
seems like the manual step by step way will be the way to go for me
[2018-09-14 09:20:37]
kilrah :
that point is where the script does nothing, so it won't be any different...
[2018-09-14 09:22:26]
royeiror :
getting stuck on both methods, on the script I'm getting stuck after step 4, getting permission error for FC_patch_sequence_for_dummy_verify.py
[2018-09-14 09:23:15]
royeiror :
in the case of the manual process I'm stuck on step 10, which ends up as being the same
[2018-09-14 09:25:13]
kilrah :
and what environment are you on?
[2018-09-14 09:25:29]
royeiror :
Using a VM with UBUNTU as I'm not able to even run the script from WSL
[2018-09-14 09:26:00]
royeiror :
I might as well start WSL from scratch
[2018-09-14 09:27:06]
royeiror :
Sudo shouldn't be needed at all on this process, right?
[2018-09-14 09:31:10]
validat0r :
VM + USB is always a bit iffy
[2018-09-14 09:33:46]
royeiror :
So, this step actually involves communication via USB?
[2018-09-14 09:34:04]
royeiror :
Weird as ADB worked fine
[2018-09-14 09:35:37]
royeiror :
In any case, I think I'll give WSL a try from scratch tomorrow as it's 3:30 here and I have no brain power left
[2018-09-14 09:35:49]
royeiror :
Thanks for your insight
[2018-09-14 09:41:32]
kilrah :
no only the adb stuff uses usb (and well flashing)
[2018-09-14 09:41:46]
kilrah :
all the usb stuff can even be done on another machine
[2018-09-14 09:51:24]
1313659 :
@kilrah Modify the module of I2 through FC_patch, flashing into the aircraft can not work properly.
[2018-09-14 09:51:43]
cantrepeat :
Didn't the guy last time having issues with WSL not have an android driver installed? @royeiror check your device manager and make sure you don't have any exclamation marks on your device.
[2018-09-14 15:14:05]
royeiror :
Thanks I'll check that
[2018-09-14 16:37:20]
royeiror :
Under lsusb, I get the device listed, but with a blank name: Bus 001 Device 011: ID 2ca3:001f (BLANK)
[2018-09-14 21:10:29]
royeiror :
Wiped WSL and started from scratch, still getting stuck on the 4th step of the script
[2018-09-14 21:11:19]
royeiror :
this is my error message
[2018-09-14 21:12:14]
royeiror :
Ran as root because I received a permission denied error
[2018-09-14 21:16:05]
cantrepeat :
Sorry, I never used the run_me file when I was doing mine. Can't help here.
[2018-09-14 21:23:08]
royeiror :
You did the step by step procedure?
[2018-09-14 21:23:46]
good.win.alexs :
it is pretty straightforward :slightly_smiling_face:
[2018-09-14 21:24:43]
royeiror :
I know, and still I smash into a wall every time, I need to understand linux better
[2018-09-14 21:44:09]
cantrepeat :
Yes, I did step by step manually
[2018-09-15 00:51:59]
royeiror :
Stuck on step 10
[2018-09-15 00:52:38]
royeiror :
* Set the path to tools correctly
[2018-09-15 00:52:55]
royeiror :
*placed everything in the same folder
[2018-09-15 00:53:18]
royeiror :
* ran the command and I have permission denied
[2018-09-15 00:56:54]
royeiror :
* set sudo chown -R royeiror:royeiror * to own everything there
[2018-09-15 01:03:48]
jakub :
@royeiror at first - I hate Slack nick auto-completion it's a ******* PAIN IN THE ***
[2018-09-15 01:04:51]
jakub :
secondly try running `chmod +x path_to_this_file` if this works (and should) I'll add it to `run_me.py`
[2018-09-15 01:05:20]
royeiror :
Hello @jakub
[2018-09-15 01:05:34]
jakub :
hello hello :slightly_smiling_face:
[2018-09-15 01:06:22]
royeiror :
I'm not quite sure what path I should cmod
[2018-09-15 01:06:41]
jakub :
copy an error and paste it here/pm
[2018-09-15 01:06:48]
jakub :
I'm too lazy to rewrite it from screens :slightly_smiling_face:
[2018-09-15 01:07:03]
royeiror :
-bash: ./FC_patch_sequence_for_dummy_verify.sh: Permission denied
[2018-09-15 01:07:05]
jakub :
also never run things as root
[2018-09-15 01:07:24]
royeiror :
I was kind of desperate
[2018-09-15 01:07:36]
royeiror :
won't do it again
[2018-09-15 01:07:39]
jakub :
"Permission denied: X"
[2018-09-15 01:07:45]
jakub :
this one please :stuck_out_tongue:
[2018-09-15 01:08:49]
royeiror :
So I don't have write permissions for the files?
[2018-09-15 01:09:23]
jakub :
execute permission
[2018-09-15 01:09:26]
jakub :
most likely
[2018-09-15 01:09:32]
royeiror :
Hadn't noticed that
[2018-09-15 01:09:39]
royeiror :
duhhhh
[2018-09-15 01:10:10]
jakub :
```find /home/royeiror/dji_fc_patcher/ -name "*.sh" -exec chmod +x {} \;```
[2018-09-15 01:10:11]
jakub :
run this
[2018-09-15 01:12:30]
royeiror :
done
[2018-09-15 01:13:09]
jakub :
try now with step 10
[2018-09-15 01:14:31]
jakub :
lgtm, let me "fix" `run_me.py`
[2018-09-15 01:21:45]
cantrepeat :
Your path to tools is not defined correctly
[2018-09-15 01:22:18]
cantrepeat :
You have tools//dji etc
[2018-09-15 01:22:32]
cantrepeat :
that should be tools/dji etc
[2018-09-15 01:23:18]
jakub :
it's ignored by system
[2018-09-15 01:24:57]
jakub :
@royeiror `<https://raw.githubusercontent.com/o-gs/DJI_FC_Patcher/9fbd216219cbd152174b415f1dfb679cf3759a7e/run_me.py>`
[2018-09-15 01:25:03]
royeiror :
remover the last / from the path_to_tools
[2018-09-15 01:25:05]
jakub :
overwrite old `run_me.py` and use this one
[2018-09-15 01:25:10]
royeiror :
will do
[2018-09-15 01:26:45]
jakub :
if you have already `0306.unsig` keep it
[2018-09-15 01:28:18]
royeiror :
I do
[2018-09-15 01:28:26]
royeiror :
have it backed up as well
[2018-09-15 01:29:17]
jakub :
on step 2 just put it inside `tmp` directory and write `ok`
[2018-09-15 01:29:46]
cantrepeat :
I need to setup a second VM and do the run_me method
[2018-09-15 01:29:47]
jakub :
I'll add something easier to "reuse" files but don't really have time for that right now
[2018-09-15 01:36:34]
royeiror :
Sorry you meant run_me.py for the wizard?
[2018-09-15 01:40:11]
jakub :
yes @royeiror
[2018-09-15 01:41:04]
royeiror :
on it
[2018-09-15 01:42:32]
jakub :
on step 2 copy `0306.unsig` to `tmp` directory
[2018-09-15 01:42:48]
royeiror :
yep
[2018-09-15 01:45:23]
royeiror :
Awesome, it didn't outright crash on step 4
[2018-09-15 01:46:56]
royeiror :
ok, got 5 and 6... on it
[2018-09-15 01:48:33]
jakub :
6? so I guess that's all
[2018-09-15 01:50:09]
royeiror :
WSL won't connect through ADB, should I copy the files to the VM and run the stuff from there?
[2018-09-15 01:50:50]
jakub :
you won't be able to use adb via WSL, use it from CMD
[2018-09-15 01:51:26]
739461411 :
all this i have no problem.but i don't understand step12 and step 13.can't flash bin file to bird.
[2018-09-15 01:51:42]
royeiror :
ok, I'll give it a go, thank you so much @jakub, you're awesome
[2018-09-15 01:51:55]
jakub :
yw
[2018-09-15 01:52:01]
jakub :
gn guys!
[2018-09-15 01:56:52]
royeiror :
Have a great night
[2018-09-15 03:52:52]
zeroim :
@jakub still here? how can i get this FW **wm335 - Phantom 4 Pro/Pro+ V2 (v01.00.1500) [Untested]**
[2018-09-15 03:59:55]
zeroim :
only found `1000`
[2018-09-15 13:04:18]
cantrepeat :
I've been looking around the DJI forums for a link to that new, well newest, firmware. It was released Jun 26 2018 but I can't find a DL link.
[2018-09-15 13:05:55]
cantrepeat :
Can you download it through DJI assistant?
[2018-09-15 13:08:29]
cantrepeat :
If so, you could do a capture with wireshark and get a copy of the firmware that way.
[2018-09-15 14:29:22]
jakub :
@zeroim no idea :slightly_smiling_face: I'm just covering cases in "all in one" script
[2018-09-15 20:12:38]
cantrepeat :
!apk
[2018-09-15 23:21:22]
royeiror :
hello again
[2018-09-15 23:21:51]
royeiror :
My DUMLDore can't flash the dji_system.bin file
[2018-09-15 23:22:11]
royeiror :
it says it can't connect to the FTP server
[2018-09-15 23:22:26]
royeiror :
ADB is not working in Windows
[2018-09-15 23:22:48]
royeiror :
but in the Linux VM When I switch the device to the VM it works well
[2018-09-15 23:23:28]
royeiror :
the error in Windows is: error: device not found
[2018-09-15 23:32:47]
royeiror :
Found a post where it says I should enter a manual IP on the NDIS network connection in the same range as the one DUMLDore's error states, Flash done correctly
[2018-09-16 02:37:54]
royeiror :
Could anyone help me out diagnosing ADB under Windows 10? I see the Mavic under device manager, but ADB won't find it
[2018-09-16 06:38:03]
markusfriedl :
How do get rid of the nfz.db or the db entries on a spark? Anything necessary that sig. file still is valid and AC can takeoff afterwards?
[2018-09-16 10:01:48]
xchwaw :
@royeiror If there is a "DJI" under the "other device" in the device manager,you are supposed to install the google usb driver.
[2018-09-16 12:00:25]
chipmangini :
@royeiror Get this program and remove anything that says DJI, then reinstall the latest Google drivers and reboot, you should be ok. <http://www.nirsoft.net/utils/usb_devices_view.html>
[2018-09-16 21:19:45]
erwin :
Does NLD deal with everything if you have a fully updated mavic pro? (Like full nfz updates and latest firmware?) Can you keep precision landing, quick shoots and the panoramas if you dont want altitude limit removed?
[2018-09-16 21:21:23]
cantrepeat :
You keep everything that's in 01.04.0300 with NLD that you want. It does remove NFZ from that firmware.
[2018-09-16 21:30:18]
erwin :
Nice, plus all parameters mods and FCC right?
[2018-09-16 22:06:05]
cantrepeat :
FCC is NLD, a lot of params can be adjusted by NLD but it can not do altitude above 500
[2018-09-16 22:07:40]
good.win.alexs :
@catalinaskirace as far as i remember - NLD can set anything up to 9km for altitude :slightly_smiling_face:
[2018-09-16 22:07:59]
good.win.alexs :
just from android app
[2018-09-16 22:08:38]
cantrepeat :
With mixed modules or FC, correct?
[2018-09-16 22:08:51]
good.win.alexs :
i suppose should work with stock .0300
[2018-09-16 22:09:10]
good.win.alexs :
unfortunately, has no stock FC anymore, so can’t test it
[2018-09-16 22:09:17]
cantrepeat :
I think you need FC to get past the 500 in 300
[2018-09-16 22:09:27]
good.win.alexs :
but NLD Go allows to setup it, so in theory it should just work
[2018-09-16 22:10:02]
cantrepeat :
NLD birdmap says no
[2018-09-16 22:10:24]
good.win.alexs :
nah, it’s not always correct :wink:
[2018-09-16 22:10:49]
cantrepeat :
yeah, and as fluid as the situation is I could be wrong for sure
[2018-09-16 22:11:01]
good.win.alexs :
as i remmeber FC logic - you have two settings for altitude. first is to follow limit by some value
[2018-09-16 22:11:07]
good.win.alexs :
second - to ignore any limits
[2018-09-16 22:11:39]
cantrepeat :
Yeah, but NLD wont pass either of those in FW after 700
[2018-09-16 22:11:45]
good.win.alexs :
in first case - we have parameter for altitude limit, that has min-max with max as 500m, so you can’t use official Go or Assistant to pass this max
[2018-09-16 22:12:05]
cantrepeat :
unless you mix or get on 300
[2018-09-16 22:12:17]
good.win.alexs :
but NLD Go, as i remember, just doesn’t care about this and has hardcoded 9000m limit
[2018-09-16 22:12:38]
cantrepeat :
I'm not sure now, you've got me rethinking
[2018-09-16 22:12:44]
good.win.alexs :
just try nld go 4.1.22 and try to change max limit in go itself
[2018-09-16 22:13:06]
good.win.alexs :
i don’t want to roll back from modded FC just to try that
[2018-09-16 22:13:11]
good.win.alexs :
but it should work
[2018-09-16 22:13:52]
cantrepeat :
me either
[2018-09-16 22:14:12]
cantrepeat :
I'm set on 300 and just reflashed to put battery type back to 1
[2018-09-16 22:14:15]
good.win.alexs :
@catalinaskirace don’t believe to everything that is written on internet pages :wink:
[2018-09-16 22:14:34]
cantrepeat :
internet = truth!! lol
[2018-09-16 22:14:59]
good.win.alexs :
if it is written in one place that it’s not working, better try anyway :slightly_smiling_face:
[2018-09-16 22:15:23]
cantrepeat :
I don't have a paid slack account so I can't scroll back far enough in ~nld to see what quad wrote the other day
[2018-09-16 22:15:29]
good.win.alexs :
btw, i have maniac plans
[2018-09-16 22:15:39]
good.win.alexs :
i want to convert mavic to 4S batt! muhaha
[2018-09-16 22:16:09]
cantrepeat :
put a solar charger on the top, never need to land again!
[2018-09-16 22:16:22]
good.win.alexs :
looks like everything can handle it. not totally sure only about motors
[2018-09-16 22:16:33]
good.win.alexs :
solar? on copter? srtsly?
[2018-09-16 22:17:01]
good.win.alexs :
with 30-40 amps usage?
[2018-09-16 22:17:57]
good.win.alexs :
i did check battery board - it has bq30z55 charge controller - it can handle 4S by default. just needs small soldering plus software reconfiguration of controller
[2018-09-16 22:18:59]
good.win.alexs :
on Mavic - ESC has powerful enough MOSFETs, it can handle up to 30V with high currents
[2018-09-16 22:19:37]
good.win.alexs :
just worrying a little about motors, they may overheat
[2018-09-16 22:19:47]
good.win.alexs :
anyway, i need modded batt to try this :slightly_smiling_face:
[2018-09-16 22:20:34]
good.win.alexs :
waiting for new lion cells from China to recover dead batt, so will put 4 cells instead of 3 anyway for experiment
[2018-09-16 22:25:23]
cantrepeat :
You know I was joking about the solar. It's pretty funny when you think about it.
[2018-09-16 22:26:46]
cantrepeat :
you need to make a video of this battery upgrade!
[2018-09-16 22:31:42]
good.win.alexs :
sure i will, if it will survive :slightly_smiling_face:
[2018-09-16 23:12:19]
cantrepeat :
How much flight time should get from the 4s batter?
[2018-09-17 05:51:26]
good.win.alexs :
I hope it will be around 5 mins more, if chinese cells will be same as original. Plus, increased motor power as top voltage will be higher
[2018-09-17 07:06:49]
lolo780 :
Mavic 1 can burn up the motors and melt down the wiring
[2018-09-17 07:07:23]
lolo780 :
M2 motors would be interesting to retrofit on 4s
[2018-09-17 07:07:49]
lolo780 :
The heat sinking is much better on the m2 and the magnets are slightly taller.
[2018-09-17 07:08:53]
good.win.alexs :
@lowellfoo780 do you have any experience with 4S on M1? I’m thinking how it will act with holes in legs for motors cooling like you did
[2018-09-17 07:11:11]
good.win.alexs :
also, i didn’t see any overheat with original batt. and ppl around has no problems with extra 300-400 grams of additional batteries weight. yes, V*I will be higher on full throttle, but shouldn’t be too much i hope
[2018-09-17 08:58:31]
lolo780 :
4s works very well
[2018-09-17 09:31:35]
good.win.alexs :
but? :slightly_smiling_face: always is some “but”. are motors very hot? with additional ventilation holes is it too dangerous to use it on max throttle? trying to understand how much pain-in-the-ass i’ll bring for myself with this “project” )))
[2018-09-17 15:39:34]
cantrepeat :
before I do something stupid has anyone change g_config.fw_cfg.max_speed maxValue and defaultValue to greater then 20?
[2018-09-17 15:54:30]
royeiror :
Thank you, I'll tri that shortly
[2018-09-17 15:54:56]
royeiror :
Thank you, I'll try that shortly
[2018-09-17 16:02:08]
1313659 :
@catalinaskirace Go will alarm: motor overload
[2018-09-17 16:26:35]
cantrepeat :
@1313659 thanks, saved me a couple of firmware builds and flashes.
[2018-09-17 18:04:38]
cantrepeat :
@quad808 yeah, I remember you posting this info in nld. NLD will show the 9k but with out 0700 or FC 0300 it wont do it.
[2018-09-17 18:06:04]
quad808 :
yah, just trying to clear up info...not for you specifically
[2018-09-17 18:29:44]
kilrah :
galileo support is fun, had 28 sats today :smile:
[2018-09-17 18:34:04]
quad808 :
I think the most I got so far was 29...spectacular!
[2018-09-17 18:34:51]
quad808 :
nevermind that it was at like 1000m high...LOL
[2018-09-17 18:46:41]
cantrepeat :
1000m and 29 sats? I was docked at the space station and could only get 12 :smile:
[2018-09-17 18:59:19]
quad808 :
I think I had like 25-27ish on the ground. I should check the logs.
[2018-09-17 20:10:49]
markusfriedl :
my record with spark is 26 sats... 3-4 of them seem to be galileo ones
[2018-09-17 20:12:10]
cantrepeat :
I think the most I've ever had was 21-23 and that was with galileo sats
[2018-09-17 21:57:20]
erwin :
has anyone here experienced NLD being stuck on 7% while downgrading?
[2018-09-17 21:58:32]
cantrepeat :
what FW are you on and what FW are you trying to get to?
[2018-09-17 21:58:42]
erwin :
1.04.0500 to 1.04.0300
[2018-09-17 21:59:22]
erwin :
(want to keep functionality and my mp does not has microsd inside)
[2018-09-17 21:59:24]
cantrepeat :
have you tried getting to .0400 first then .0300
[2018-09-17 21:59:43]
erwin :
oh good idea
[2018-09-17 21:59:46]
cantrepeat :
yeah .0300 is a good FW to be on
[2018-09-17 22:00:12]
erwin :
will try, the thing is 1.04.0500 gets detected as 1.04.0400 so I guess I will try to reflash
[2018-09-17 22:00:28]
cantrepeat :
always flash twice
[2018-09-17 22:00:38]
cantrepeat :
even if it says it's 100%
[2018-09-17 22:18:14]
quad808 :
hey @erwin I think I responded to you via NLD ticket
[2018-09-17 22:22:51]
erwin :
Yes but I was just doing that, it gets stucks anyway at 7%
[2018-09-17 22:23:17]
erwin :
I am testing what @catalinaskirace said about going to .0400 first
[2018-09-17 22:24:56]
cantrepeat :
I would follow whatever @quad808 suggest. I'm just flapping my gums trying to help
[2018-09-17 22:26:35]
quad808 :
Use DJI Assistant and downgrade first V1.2.4
[2018-09-17 22:26:58]
quad808 :
to 01.04.0300
[2018-09-17 22:27:23]
erwin :
ok, but btw I think what @catalinaskirace said works
[2018-09-17 22:27:51]
erwin :
if your mp is 1.04.0500 it will get stuck at 7% in NLD. But if you reflash 1.04.0400
[2018-09-17 22:28:01]
erwin :
it will flash correctly after that
[2018-09-17 22:28:05]
erwin :
:slightly_smiling_face:
[2018-09-17 22:28:51]
cantrepeat :
so are you on .0300 now?
[2018-09-17 22:29:02]
erwin :
60% away yet
[2018-09-17 22:29:26]
erwin :
should I flash my RC too? or can I keep it with 1.04.0500/ 1.04.0400?
[2018-09-17 22:30:11]
cantrepeat :
For me, I just matched my RC to the bird and went with .0300 on both.
[2018-09-17 22:30:54]
cantrepeat :
It was suggest to me by a few of the long term users here.
[2018-09-17 22:31:08]
cantrepeat :
people smart then I
[2018-09-17 22:31:09]
erwin :
ok
[2018-09-17 22:31:54]
erwin :
I hope silenciorc supports .0300 :stuck_out_tongue:
[2018-09-17 22:32:08]
cantrepeat :
it does and it's sooo quiet!! lol
[2018-09-17 22:32:22]
erwin :
yeah it is awesome
[2018-09-17 22:32:50]
erwin :
specially with the fucking low battery alarm
[2018-09-17 22:33:06]
cantrepeat :
or RTH uggg
[2018-09-17 22:33:19]
erwin :
[2018-09-17 22:33:35]
cantrepeat :
nice
[2018-09-17 22:34:21]
erwin :
I was trying to stay all legal, but latest updates are just troll moves from dji, so f**k them
[2018-09-17 22:34:32]
erwin :
NEW FEATURE, MP2 SPAM
[2018-09-17 22:34:54]
cantrepeat :
when I was trying to downgrade my bird I did it all in dumldore 3.10 and flashed the .0300, then went ot NLD and flashed my patch NLD .0300 then went on to FC with dumldore.
[2018-09-17 22:35:41]
erwin :
I was going to use dumldore directly but NLD integration was sexy enough
[2018-09-17 22:35:56]
cantrepeat :
well, everything you are installing is legal, it's what you do with the new abilities that could be illegal.
[2018-09-17 22:36:20]
erwin :
right, I mean legal to dji eyes
[2018-09-17 22:36:32]
cantrepeat :
china law!!!!
[2018-09-17 22:36:38]
erwin :
xDD
[2018-09-17 22:37:01]
erwin :
but I am pretty sure the new features for the mp are over, any update will lock shit and add more spam
[2018-09-17 22:37:56]
erwin :
last question: does the RCgets unsynced if you downgrade?
[2018-09-17 22:39:11]
cantrepeat :
I don't believe so.
[2018-09-17 22:39:33]
cantrepeat :
I never had to relink after either upgrade or downgrade
[2018-09-17 22:45:10]
quad808 :
Yes, it shouldn't, but if it does, just re pair it
[2018-09-17 22:45:35]
quad808 :
happened to me once when I almost bricked my Mavic during testing
[2018-09-17 23:19:56]
erwin :
[2018-09-17 23:20:22]
erwin :
tiny typo @quad808 (*plese* wait)
[2018-09-17 23:26:16]
cantrepeat :
haha nice, I never noticed
[2018-09-17 23:30:52]
quad808 :
It's kinda like “portect” params...LOL
[2018-09-17 23:35:01]
erwin :
:smile:
[2018-09-17 23:35:31]
erwin :
is sport+ dangerous? like might the mp flip and explode or something?
[2018-09-17 23:40:59]
cantrepeat :
coding while high or drinking is good time
[2018-09-17 23:53:40]
quad808 :
Only full manual will flip the MP
[2018-09-17 23:54:00]
quad808 :
just ask @aciid lol
[2018-09-17 23:58:23]
cantrepeat :
I wanted to change maxValue and defaultValue on max speed to 40 today just to see what it would do. Someone kindly enough told me it would just error out in the GO app.
[2018-09-18 00:06:19]
quad808 :
I tried that...changed max value via params and custom FC...didn't work. No change in flight.
[2018-09-18 00:07:12]
cantrepeat :
haha, thought it would be fun to buzz around at 60mph for a few seconds.
[2018-09-18 00:30:15]
erwin :
@quad808 any visual cue to see if I am in fcc mode inside the patched nld djigo?
[2018-09-18 00:47:09]
cantrepeat :
visual no. The only thing I know is to check the file and make sure FCC:true but is set to true by default.
[2018-09-18 00:47:19]
cantrepeat :
are you running nld 4.1.22?
[2018-09-18 00:50:04]
cantrepeat :
on your android device file name is /DJI/og_settings/datalink.settings.json setting is m_ForceFCC true
[2018-09-18 01:00:19]
erwin :
Ok! I think I'm 100% ready now
[2018-09-18 01:00:26]
erwin :
{"m_BoostMode":false,"m_DoLogging":false,"m_ForceFCC":true,"m_SpecialFrequencyMode":0,"m_Use32Channels":false}
[2018-09-18 01:16:47]
cantrepeat :
yup, you're set
[2018-09-18 01:17:51]
cantrepeat :
I'm out guys
[2018-09-18 15:20:17]
xyeqomns :
!apk
[2018-09-19 08:15:51]
ender :
guys, now that i have a working Mavic, how would i go about to activate boost mode (FCC is done by patched .22 app, thats fine but :slightly_smiling_face: i want more). For usual flights i’ll use the Anafi, better Quality, less noise but for FAAAR range i need the Pro. Also any hibts where i can read up on FC Patcher usage ?
[2018-09-19 08:16:34]
ender :
(besides on github of fc-patcher of course)
[2018-09-19 08:16:42]
cantrepeat :
are you running a moded GO app?
[2018-09-19 08:17:26]
ender :
yup, modded by deejayexe modder on 4.1.22
[2018-09-19 08:26:36]
ender :
BTW does anyone know if the “good old” DJI Assistant 1.12 and the latest & greatest can coexist on windows ?
[2018-09-19 08:26:50]
ender :
1.12 needed for NLD, 1.24 needed for whatever :slightly_smiling_face:
[2018-09-19 08:30:40]
elintnl :
@ender I used DJI go Boost app
[2018-09-19 08:30:55]
elintnl :
next to 4.1.22 mod
[2018-09-19 08:30:59]
good.win.alexs :
@ender best way to use NLD :wink:
[2018-09-19 08:31:17]
ender :
dji go boost app != modded dji go ? is it a seperate app ?
[2018-09-19 08:31:17]
good.win.alexs :
you will need just one Go (with any “Boost” version etc)
[2018-09-19 08:31:23]
good.win.alexs :
and it is rock solid and stable
[2018-09-19 08:31:46]
ender :
Advantage of boost app would be i can decide whether i want it. So only do it if i need it, right ?
[2018-09-19 08:31:48]
good.win.alexs :
@ender for boost you have two options
[2018-09-19 08:32:05]
good.win.alexs :
1. Use special “boost” go for first launch, then relaunch patched 4.1.22
[2018-09-19 08:32:12]
good.win.alexs :
2. Just use NLD Go
[2018-09-19 08:32:50]
good.win.alexs :
second option is working much much better. in 1st case, sometime you may find that boost was not activated :wink:
[2018-09-19 08:36:44]
cantrepeat :
yeah nld is worth the coin
[2018-09-19 08:37:05]
ender :
uhh thats bad (unreliable) but it has the advantage of not having to use boost.
[2018-09-19 08:37:09]
ender :
i KNOW :slightly_smiling_face:
[2018-09-19 08:37:31]
cantrepeat :
I've got a friend on the other side of the states that's getting ready to by a mavic. I'm just going to buy him a nld key and save myself a lot of head aches trying to help him.
[2018-09-19 08:38:48]
cantrepeat :
boost, AGL, APK and googleMaps if I can figure out how to force a default zoom at start up.
[2018-09-21 11:52:28]
validat0r :
!ddd
[2018-09-21 18:46:39]
kurdi80 :
FC-Patcher for pantom 4 pv2 not work
[2018-09-21 19:19:46]
cantrepeat :
yup, says that it was added but as yet is untested.
[2018-09-21 19:42:55]
kurdi80 :
sem helps abut pv2 patcher
[2018-09-21 19:45:53]
good.win.alexs :
@kurdi80 patcher works as expected with p4p v2.0 :wink:
[2018-09-21 19:46:01]
good.win.alexs :
there is no issue with patcher itself
[2018-09-21 19:46:33]
good.win.alexs :
issue is - FC on v2.0 works in “different” way in some things than other DJI birds
[2018-09-21 19:47:29]
good.win.alexs :
for ex., it ignores standard altitude restriction parameters - maybe, it has some new params, or it has just hardcoded limits - nobody knows as of now
[2018-09-21 22:33:58]
kurdi80 :
After FC_Patcher flashing I2
[2018-09-22 01:37:26]
1313659 :
Yes，My I2 also had the same failure. When DJIGO4 was turned on, it indicated that it had the same failure and could not take off at all.
[2018-09-22 01:43:35]
kurdi80 :
hello
[2018-09-22 01:44:02]
kurdi80 :
and phantom 4 pro V2 you complet
[2018-09-22 01:44:27]
kurdi80 :
patcher
[2018-09-22 01:49:47]
kurdi80 :
@1313659 and phantom 4 pro V2 you complet
[2018-09-22 01:53:05]
1313659 :
P4pv1.0 can take off normally.
[2018-09-22 01:54:13]
1313659 :
2.0 can take off，too。
[2018-09-22 02:06:31]
kurdi80 :
You can flashed
[2018-09-22 02:06:37]
kurdi80 :
v2
[2018-09-22 02:07:25]
kurdi80 :
After flashing give me thes
[2018-09-22 02:07:41]
kurdi80 :
[2018-09-22 02:14:40]
1313659 :
@mathieu.peyrega Can you provide the py script for I2 firmware V01.01.0010? I'll test again to see if I can take off.
[2018-09-22 02:29:07]
1313659 :
V2 can flashing without the trouble tip of your photo.
[2018-09-22 02:39:36]
kurdi80 :
ok how you can tech me
[2018-09-22 02:40:29]
kurdi80 :
in the setep 11
[2018-09-22 02:41:11]
kurdi80 :
you chose cp /sbin/dji_verify /vendor/bin/original_dji_verify_copy or cp /system/bin/dji_verify /vendor/bin/original_dji_verify_copy
[2018-09-22 09:17:04]
cantrepeat :
!apk
[2018-10-08 20:40:41]
cirlam :
looking for some help please im trying to flash firmware V01.03.0700_Mavic_dji_system.bin
to my mavic pro, its currently running firmware V01.04.0100. (after doing a factory reset)
Im flashing using DUMLdore v3.10 the flash process failed at 56% EVERY TIME (after the reboot)
I have tried different firmware versions (1.03.1000) amongst others, but the same thing happens at 56%
After the "bad flash" my mavic now keeps the usb doing an on/off all the time when pluged in, its now not being detected by DJI+Assistant+2+1.2.4.
To get around this i have to remove the Remote NDIS based Internet Sharing Device then it gets detceted again.
ive reinstalled the drivers and DJI+Assistant but still no luck.
im running windows 10 64bit.
ive also done the digital sign drivers etc, and the ftp fix (192.168.42.4)
below is the DUMLdore error code that pops up in the box
<https://pastebin.com/v7Nb2uUB>
[2018-10-08 21:03:07]
ender :
Hi !
[2018-10-08 21:04:31]
ender :
I had the same usb cycle and thought all is over…
i fired up dji assistant and it was not detected.
Then i simply left it open and after a while the “cycle” stopped and djia detected it.
It was about 2-3 minutes.
[2018-10-08 21:04:53]
cirlam :
ok thanks ill try that
[2018-10-08 21:05:11]
ender :
Maybe also try a different PC… It seems to be a timing problem, maybe djia hast to be very fast when the next cycle starts.
[2018-10-08 21:05:23]
ender :
But maybe it was a different condition or pure luck
[2018-10-08 21:05:28]
ender :
Good luck !
[2018-10-08 21:05:34]
cirlam :
i thought that to, i have tried on another pc
[2018-10-08 21:05:48]
cirlam :
thanks for the input
[2018-10-08 22:19:35]
quad808 :
Turn on your RC, while it is connected to the PC and USB is disconnecting and reconnecting. If you can get it to connect to the RC, then Assistant should then detect it and you can reflash the 01.04.0100 firmware.
[2018-10-08 22:20:00]
quad808 :
You need to break the USB loop
[2018-10-13 08:41:13]
d.cernak :
!apk
[2018-10-13 12:17:33]
cirlam :
Im still struggling to flash my mavic.
ive tried flashing using DJI+Assistant and DUMLdore
im currently stuck on firmware version V01.04.0100 (trying to flash V01.03.0700)
every flash fails due to a "The port 'COM3' does not exist" after the reboot during the flash process.
i have tried on 2 different pcs.
is there any other tool to flash my mavic i can try , or does anybody know a way around the com3 error?
[2018-10-13 12:19:46]
cantrepeat :
try going to 01.04.0900 then to t he 0700 FW
[2018-10-13 12:20:04]
cantrepeat :
sorry 01.03.0900 to 0700
[2018-10-13 12:20:17]
cirlam :
ok thanks ill give that a try
[2018-10-13 12:20:25]
cantrepeat :
flash twice to 0900 then 0700
[2018-10-13 12:20:35]
cirlam :
ok thanks
[2018-10-13 13:07:46]
cirlam :
ok so i tried flashing 01.03.0900 using DUMLdore.
does a quick reboot at 44% (one set of bleeps)
same error at 70%
"The port 'COM3' does not exist" after the reboot during the flash process.
then it gets stuck in the "USB loop"
[2018-10-13 13:09:20]
cirlam :
when flashing do i need to have the RC connected to the mavic ? (not via usb)
[2018-10-13 18:18:36]
quad808 :
flash your current firmware again, twice. Make sure no errors with testing. Then .900 twice, then .700 twice. Also double check your usb cable to make sure it's good. May be causing issues.
[2018-10-15 12:30:13]
cantrepeat :
!apk
[2018-10-16 15:18:22]
dmedvor :
Hi
Greetings and Regards
my drone is inspire1.
I did these steps.
<https://dji.retroroms.info/howto/modp3params>
But no disable NFZ
Can you guide?
email : [dmedvor@gmail.com](mailto:dmedvor@gmail.com)
Thanks a lot
[2018-10-18 08:22:06]
zhangcecus :
After flashing the FC_Patcher Fw to P4P V2.0 desplaying "navigation system error" at OPTI mode without GPS,As long as the GPS signal can be found, it disappears.
[2018-10-18 11:07:13]
good.win.alexs :
you may try to comment our all UBX patches in patcher
[2018-10-18 11:07:32]
good.win.alexs :
looks like some troubles with this part of patch, and it is soooo easy to workaround it
[2018-10-18 23:26:52]
flameoncalgary :
How do I work around no-fly-zones on the Mavic 2?
[2018-10-18 23:41:54]
nocommie :
lol, send your ss#, a blood sample and all your passwords/bank info to the Chinese gov (DJI)
[2018-10-18 23:46:04]
andrwho25 :
lmao
[2018-10-20 16:57:47]
glhs958 :
after reading and learning what I can so far via all the info available. I have a question regarding modding the FC 306 module in V01.00.0900 for spark. I have currently produced a working 306 with the parms I wanted and installed on ac. i got a successful "sys_check_version: 82]:: Same version" after modding the firmware but dji go4 shows a version of 0.0.0, nld shows unknown, but dumldore shows 01.00.0900 which is what i have installed. So the question is did i do something wrong or is this the intended results since the version # of 306 is different?
[2018-10-20 16:58:47]
validat0r :
does the AC behave according to your param changes?
[2018-10-20 16:58:58]
glhs958 :
yes it does
[2018-10-20 16:59:55]
validat0r :
all good, then
[2018-10-20 17:00:46]
glhs958 :
good deal thanks
[2018-10-20 22:07:21]
quad808 :
Stock GO 4 shows as it should, NLD doesn't recognize it due to the way NLD checks each module version, NLD GO 4.1.22 has version check disabled, and DUMLdore shows corrrect because it checks the .sig file.
[2018-10-21 01:26:58]
glhs958 :
thanks quad808 for the reassurance in what I thought was going on.
[2018-10-22 16:55:31]
blak :
anyone had problems loading maps with modded dji go 4.1.22
[2018-10-22 17:01:08]
007 :
<https://www.rcgroups.com/forums/showpost.php?p=39763062&postcount=5726>
[2018-10-22 17:04:04]
blak :
yeah i followed his guide for loading the patched go app
[2018-10-22 17:04:18]
blak :
i also installed dji boost, and maps work if i start the boost app
[2018-10-22 17:04:49]
blak :
i didn't want to use boost all the time though
[2018-10-22 17:05:12]
007 :
Haaaaa ?
[2018-10-22 17:06:44]
blak :
i read it's hard on the RF chips and can overheat them
[2018-10-22 17:07:13]
blak :
i was trying to cache some maps for a flight im going on in a bit. Just taking some pics in a small area though so don't really need a bunch of maps
[2018-10-22 22:09:28]
blak :
well did a good flight and a nice vid and pics
[2018-10-22 22:09:38]
blak :
and maps load when the boost app starts
[2018-10-28 18:48:02]
rohanpandula :
hey guys i have a question, if i have the modded fw, can i use the stock fw to get FCC boost in ce places?
[2018-10-29 02:50:07]
ryan :
If you upload the dji.settings file to your phone or tablet that runs the go 4 app
[2018-10-29 22:20:05]
waterlubber :
So last night I installed the real app, connected, flew around for a while
[2018-10-29 22:20:22]
waterlubber :
I have a fresh and new modded apk and now my phone refuses to connect to the drone or the controller - the "next" button is grayed out
[2018-10-29 22:20:38]
waterlubber :
I have succesfully connected to the network but the app refuses to recognize that
[2018-10-29 22:21:43]
waterlubber :
So, more accurately, the modded apk doesn't recognize that I am connected to the controller/drone
[2018-10-29 22:22:03]
waterlubber :
(also: is there any way to skip that obnoxious walkthrough? I don't need to wait 8 seconds for it to tell me to put the blasted battery in
[2018-10-29 22:34:54]
waterlubber :
also: is there any way for me to run a Spark on amateur bands at much higher powers? has this been done?
[2018-10-29 22:37:15]
validat0r :
what bands? you mean outside of 2,4/5GHz?
[2018-10-29 22:42:02]
validat0r :
for higher powers use the deejayeye mod app
[2018-10-29 22:51:45]
waterlubber :
having trouble with it
[2018-10-29 22:51:50]
waterlubber :
it won't connect to my spark or the sparks controller
[2018-10-29 22:53:45]
waterlubber :
Ah, solved it
[2018-10-29 22:53:52]
waterlubber :
Had to do with my phone using mobile data for internet
[2018-10-30 20:24:28]
wankus :
!apk
[2018-11-06 13:40:50]
nabelo :
!apk
[2018-11-10 22:38:32]
borillion_star :
so I want to upgrade to 01.04.0700 from 01.03.0700 do I need to flash the RC too or is the drone usually enough for the Mavic Pro ?
[2018-11-11 04:04:13]
quad808 :
I would upgrade the RC, but me? Not going above 01.04.0300 for various reasons...
[2018-11-11 12:03:39]
kilrah :
01.04.0700 doesn't even exist :smile:
[2018-11-11 17:18:04]
quad808 :
firmware from outer space apparently. LOL
[2018-11-12 00:19:14]
borillion_star :
I think it was 01.04.0400 actually.
[2018-11-12 00:19:56]
borillion_star :
I flashed it. Things went south.
[2018-11-12 00:22:24]
borillion_star :
I almost lost my drone today. Phew. It was about 500 ft/152 meters up and started to give me warning about electromagnetic interference, wouldn't respond to return to home button or command. I took off straight up tried to do a sphere pano and it failed. Ended up drifting about 800 ft my right. It's never drifted like that before. Also when I turned it on it took 15 min to get a good lock on gps.
[2018-11-12 00:34:14]
borillion_star :
Was I supposed to recalibrate after flash?
[2018-11-12 05:16:26]
lolo780 :
Upload the flight log to airdata
[2018-11-12 06:20:42]
borillion_star :
Not sure what files I need. Will look for them.
[2018-11-12 08:29:00]
validat0r :
Always check for properly calibrated sensors before takeoff
[2018-11-12 15:31:21]
cantrepeat :
I too once had a crazy flight after a flash. So I always recal the compass and IMU after a flash. I don't know if it is necessary or not but I do it.
[2018-11-12 15:41:54]
kilrah :
never did here
[2018-11-12 15:48:24]
validat0r :
Had a really crazy flight/mission one time. Loss of AC was almost certain. Came back though after an unlikely recovery. I blame a misaligned compass. Check the compass before every flight since.
[2018-11-12 17:06:30]
cantrepeat :
When my MPP went hay-wire after the flash it tossed up a bunch of errors and was hard to control. I wasn't sure I would get it back to the take-off point.
[2018-11-12 17:08:06]
cantrepeat :
AC titled over and started to spin a slow circle.
[2018-11-12 17:08:19]
cantrepeat :
inputs were slow or not at all for about 30 seconds
[2018-11-12 17:14:38]
borillion_star :
I actually upload the wrong one. It's this one.
[2018-11-12 17:14:41]
borillion_star :
<https://app.airdata.com/share/jTLgRs>
[2018-11-12 17:15:29]
borillion_star :
How do you overlay the app onto the video?
[2018-11-12 19:57:01]
cantrepeat :
It’s just a screen record app on a Samsung device.
[2018-11-16 19:55:53]
marvinhowru :
!apk
[2018-11-16 19:56:35]
marvinhowru :
Are these the right APK to use if I want to force my Mavic Air into FCC mode? I'm in Europe
[2018-11-16 19:58:36]
quad808 :
Yes, but you need to patch it.
[2018-11-16 19:58:39]
quad808 :
!wiki
[2018-11-16 20:01:30]
marvinhowru :
Thanks, is there any simpler method for forcing FCC mode?
[2018-11-16 20:02:31]
quad808 :
the only way around is to try and use GPS spoofer, but I have not tired...patching your own GO is not hard at all.
[2018-11-16 20:22:11]
marvinhowru :
Thanks I found this: <https://sparkpilots.com/threads/dji-go-4-mod-2-0-dji-go-4-mod-lite-additional-features-android-app-ver-4-1-15.3841/>
[2018-11-16 20:23:15]
webmaster :
You do not know, where this version of GO actually comes from, I would prefer, as quad stated, to patch your own...
[2018-11-16 21:26:23]
marvinhowru :
Switched to FCC mode using Fake GPS
[2018-11-17 08:37:23]
borillion_star :
<https://cdn.pbrd.co/images/HNyDVbv.png>
[2018-11-17 08:37:38]
borillion_star :
Is there anyway to scale the app to fit?
[2018-11-17 15:37:56]
rickw001 :
change screen dpi on phone or tablet
[2018-11-17 17:53:20]
eitan1195 :
anyone did some research on lightbridge (reverse engineer the firmware on the mavic pro)?
[2018-11-17 23:26:33]
borillion_star :
yea doesn't help
[2018-11-18 20:57:21]
borillion_star :
Anyone seen increased battery usage after flashing custom rolled firmware?
[2018-11-18 21:03:27]
validat0r :
no
[2018-11-18 21:05:38]
borillion_star :
LOL kk maybe its just my luck or I'm imagining things.
[2018-11-25 22:56:04]
validat0r :
Don’t know. But I use 4.1.14 and don’t bother with the about page
[2018-11-25 23:06:14]
cantrepeat :
Same, 4.1.22 and with FC patcher it shows no version number, but I'm guessing that's because it's custom
[2018-11-26 20:07:30]
quad808 :
No version is shown because it is blocked, so you don't get any forced upgrades through GO. DJI checks the version in order to send an upgrade notice. With patched GO, you won't get any "upgrade now or we will LOCK your drone" message, since GO has no idea what version of firmware you are on. Sweet.
[2018-11-26 21:57:52]
fredmicrowave :
Is there any reason **not** to fly always in airplane mode, as I do ?
[2018-11-26 22:00:17]
validat0r :
airplane mode is fine. i do it all the time
[2018-11-26 22:03:27]
fredmicrowave :
Ok. Because I see lots of comments and problems related to phone making unwanted communication. and I could see only inconvenients on doing so .
[2018-11-27 19:17:21]
critterrzz :
Is there a known problem with Fc patcher script and Spark? Getting errors extracting files.
When I use mavic and script, all is good
[2018-11-27 19:21:13]
critterrzz :
Its the "all in one" script
[2018-11-27 19:23:09]
validat0r :
No principal problem .. Didn't use the script though
[2018-11-27 19:29:18]
critterrzz :
I have re downloaded the spark bin to make sure it is not corrupt and double checked command line. Just wondering if some has used it on spark so I don't drive myself crazy looking for something that I can't do anything about anyways.
[2018-11-27 19:43:20]
critterrzz :
The script is looking for wm100.cfg.sig when it should be w100a.cfg.sig
[2018-11-27 19:53:06]
validat0r :
@mathieu.peyrega is your man
[2018-11-27 20:40:09]
poopnondji :
Couldn't get the script to work with the Spark either, had to do it manually.
[2018-12-02 15:34:14]
o1241242 :
!help
[2018-12-08 07:25:33]
daslolo :
To "remove" altitude limitter on Spark, is the best way to downgrade firmware to .300 with dumldore, then use the debug console hack in Assistant 2 to set alt to 2500m ?
[2018-12-08 08:36:48]
lolo780 :
Yes
[2018-12-08 08:37:14]
lolo780 :
Or higher. Spark can go well over 3km
[2018-12-08 15:02:34]
daslolo :
3k above launch point?!
[2018-12-08 15:05:27]
daslolo :
do I need a modded version of Assistant 2? I read that DJI now prevents setting the debug flag.
[2018-12-08 15:10:08]
validat0r :
you'll need the 1.1.2 version of Assistant 2 and change sth in a javascript file on disk
[2018-12-08 15:10:11]
validat0r :
!wiki
[2018-12-08 15:10:41]
validat0r :
and of course a downgraded FC or a patched FC
[2018-12-08 15:34:15]
daslolo :
So kind of them to write that app in Javascript!
[2018-12-08 15:39:13]
validat0r :
I think it's Electron? I guess javascript devs are just the cheapest to hire
[2018-12-08 15:45:01]
daslolo :
The firmware has open source in it?
[2018-12-08 17:52:44]
daslolo :
what is the name of that adhesive gel that can be detached and reattached countless time like velcro?
[2018-12-10 18:24:45]
bobdole :
sacrilege
[2018-12-11 13:54:59]
eitan1195 :
after trying to pair my mvp rc to the drone for too long - it stopped connecting to the assistant, and looked like it became a uav.how do i revert it?
[2018-12-12 20:46:28]
nabelo :
!apk
[2018-12-13 10:45:33]
1107211347 :
hello
[2018-12-13 10:45:35]
1107211347 :
E
[2018-12-13 10:45:35]
1107211347 :
E
[2018-12-13 10:45:36]
1107211347 :
E
[2018-12-13 10:45:37]
1107211347 :
E
[2018-12-13 10:45:38]
1107211347 :
EE
[2018-12-13 10:45:39]
1107211347 :
E
[2018-12-13 10:45:40]
1107211347 :
E
[2018-12-13 10:45:41]
1107211347 :
E
[2018-12-13 10:45:42]
1107211347 :
E
[2018-12-13 10:45:42]
1107211347 :
E
[2018-12-13 10:45:43]
1107211347 :
E
[2018-12-13 10:45:44]
1107211347 :
EE
[2018-12-13 10:45:44]
1107211347 :
E
[2018-12-13 10:47:58]
cantrepeat :
wow
[2018-12-13 10:56:48]
kilrah :
F?
[2018-12-13 10:58:19]
cantrepeat :
Fello?
[2018-12-13 19:55:14]
quad808 :
Tello?
[2018-12-14 08:22:37]
ender :
Maybe its morse code, one "E" = short, two "EE" = long ?! So that would mean...
H D S R which means: "Help, DJI Sent Robots" ????
[2018-12-14 16:09:28]
joerg.felser :
[2018-12-14 16:09:50]
joerg.felser :
Any chance to overwrite max flight height?
[2018-12-14 16:10:28]
joerg.felser :
And why isnt it measured over ground but from starting Point? Doesnt make sense in the mountains
[2018-12-14 16:15:14]
cantrepeat :
That is a draw back to AGL flight from point of take off. NLD and some other good folks here know that and added DTM height to the Mavic.
[2018-12-14 16:15:24]
cantrepeat :
I'm not sure if any work is being done to add that to other drones
[2018-12-14 16:15:52]
cantrepeat :
It's not a simple task. You have to add data maps to the app for the area you are flying.
[2018-12-14 16:24:32]
cantrepeat :
<https://nolimitdronez.com/new-nld-go-4122-instructions>
[2018-12-18 15:42:25]
kurdi80 :
I whont to remove NFZ for my Parrot :smiley::stuck_out_tongue_winking_eye:
[2018-12-18 21:07:39]
daslolo :
where do I get the version of dji assistant with debug mode?
[2018-12-18 21:15:39]
validat0r :
<http://ifile.icomm.net.il/index.php/s/TsbafG9CZSATise/download>
[2018-12-18 21:16:02]
daslolo :
thanks a lot!
[2018-12-18 21:16:28]
validat0r :
open C:\Program Files (x86)\DJI Product\DJI Assistant 2\AppFiles\main.js
[2018-12-18 21:16:59]
validat0r :
look for "openDevTools" and enable the line
[2018-12-18 21:17:20]
validat0r :
the you have to set "debug = 1" in the console
[2018-12-18 21:30:19]
daslolo :
so after I uncomment * mainWindow.webContents.openDevTools()
*
[2018-12-18 21:30:32]
validat0r :
jup
[2018-12-18 21:30:36]
daslolo :
I launch assistant 2 and the console should be on the right?
[2018-12-18 21:30:47]
validat0r :
yeah
[2018-12-18 21:31:19]
daslolo :
it's not showing and the version on the lower right corner is 1.1.2-2
[2018-12-18 21:31:29]
validat0r :
you maybe have to change to another view .. parameters or something
[2018-12-18 21:31:55]
daslolo :
ok lemme look it up
[2018-12-18 21:31:58]
daslolo :
thanks!
[2018-12-18 21:32:13]
validat0r :
Resources -> Local Storage -> file -> debug -> 1
[2018-12-18 21:32:24]
validat0r :
you have to set it on every program start
[2018-12-18 21:35:19]
daslolo :
it needed to be in admin mode
[2018-12-18 21:54:20]
daslolo :
how do i change altitude imit?
[2018-12-18 21:54:25]
daslolo :
and speed up descent?
[2018-12-18 22:00:47]
validat0r :
what bird?
[2018-12-18 22:02:37]
validat0r :
for breaking 500m alt limit you need a very old firmware where you can set g_config_flying_limit_height_limit_enabled = 2
[2018-12-18 22:03:04]
validat0r :
or you use the FC_patcher and flash a custom flight controller
[2018-12-18 22:03:25]
validat0r :
g_config_mode_sport_cfg_vert_vel_up= 10
[2018-12-18 22:03:44]
validat0r :
g_config_mode_sport_cfg_vert_vel_down = -10
[2018-12-18 22:03:57]
validat0r :
g_config_mode_normal_cfg_vert_vel_up = 6
[2018-12-18 22:04:03]
validat0r :
g_config_mode_normal_cfg_vert_vel_down = -6
[2018-12-18 22:06:29]
daslolo :
platinum mavic
[2018-12-18 22:09:57]
daslolo :
yeah g_config_flying_limit_height_limit_enabled doesn't exist
[2018-12-18 22:10:22]
daslolo :
and i'm running 0700
[2018-12-18 22:10:33]
daslolo :
which i think has that mod
[2018-12-18 22:13:34]
validat0r :
either you downgrade or you use fc_patcher
[2018-12-18 22:26:02]
daslolo :
ohhh dumldore doesn't in fact downgrade firmware 04.0200
[2018-12-18 22:28:00]
validat0r :
i've got a spark, so my knowledge about mavics is limited.
[2018-12-18 22:28:46]
validat0r :
but i used to run that very old firwmare on which one could change the g_config_flying_limit_height_limit_enabled param
[2018-12-18 22:29:16]
validat0r :
that was nice .. but had some drawbacks. now i'm on second latest with modded FC module
[2018-12-18 22:29:25]
validat0r :
works like a charm.
[2018-12-18 22:30:33]
daslolo :
how is the spark once modded?
[2018-12-18 22:30:42]
validat0r :
but, i admit, it's not for the faint of heart
[2018-12-18 22:31:03]
validat0r :
? what do you mean
[2018-12-18 22:31:04]
validat0r :
?
[2018-12-18 22:31:21]
daslolo :
what drawback?
[2018-12-18 22:31:56]
validat0r :
uhm .. dont remember any more ..
[2018-12-18 22:33:04]
validat0r :
something with dji go 4.1.14
[2018-12-18 22:33:17]
validat0r :
some telemetry not showing i think
[2018-12-18 22:41:27]
daslolo :
sounds like risky fun :stuck_out_tongue:
[2018-12-18 22:41:50]
daslolo :
do you race carbon frames?
[2018-12-18 22:52:47]
daslolo :
how bollocks
[2018-12-18 22:52:51]
daslolo :
dumldore keeps crashing
[2018-12-18 23:25:18]
validat0r :
no carbon
[2018-12-18 23:25:46]
validat0r :
thats bad .. maybe try an older version of dumldore
[2018-12-18 23:26:03]
daslolo :
good idea!
[2018-12-19 08:07:21]
brd_gsm :
Then find a root exploit and try to get rid of it!
[2018-12-19 15:28:56]
bobdole :
hello - is it possible to remove NFZ files manually from a rooted Mavic Pro Platinum on 01.04.0300 (running patched FC)? I tried the stage2.bin thing with dumldore and it does not seem to be working for me.
[2018-12-19 15:29:21]
bobdole :
i'm thinking i could just create an empty file and push it? not that easy?
[2018-12-19 15:30:09]
validat0r :
no. should be same sqlite3 db with an empty nfz table, not a file with length 0
[2018-12-19 15:30:38]
validat0r :
and of course a patched dji_verify
[2018-12-19 15:33:33]
cantrepeat :
you need an older version of dumldore, I think 3.03 and the stage2.bin that is linked in the page I sent you
[2018-12-19 15:33:48]
cantrepeat :
it works just fine on my end
[2018-12-19 15:43:22]
bobdole :
ah - i was NOT using 3.03
[2018-12-19 15:43:41]
bobdole :
thanks again
[2018-12-19 16:04:25]
cantrepeat :
make sure you follow the instructions on that page number 4 and 5
[2018-12-19 16:13:29]
cantrepeat :
and that you have t he correct stage2.bin
[2018-12-19 16:34:14]
bobdole :
the 3.03 i had was not the actual 3.03 as i found. April 26th commits - browse files - found actual 3.03 and now its flashing stage1 and the replaced stage2
[2018-12-19 16:36:09]
bobdole :
actual 3.03 <https://github.com/jezzab/DUMLdore/tree/eb965b90cd42a7008cf92364a7c7de70faa26be5>
[2018-12-19 16:42:47]
bobdole :
sqlite> SELECT count(*) from airmap_geofence_polygons;
0
[2018-12-19 16:42:56]
bobdole :
:grinning:
[2018-12-19 16:43:49]
cantrepeat :
why not use the v3.03 and stage2.bin that are linked in the page on retro?
[2018-12-19 16:44:09]
bobdole :
it was downloading the current one it seems
[2018-12-19 16:44:43]
cantrepeat :
ah, well as long as you got it working. I guess the link might need updating
[2018-12-19 16:45:01]
bobdole :
yes, the link should be updated - thanks again
[2018-12-19 16:46:00]
cantrepeat :
don't go crashing into any nose cones
[2018-12-19 16:47:14]
bobdole :
i believe they're finding it wasn't a drone
[2018-12-19 16:47:32]
lolo780 :
It was the Borg cube
[2018-12-19 16:48:03]
bobdole :
a nice lightened borg cube with phantom motors and speed holes drilled everywhere???
[2018-12-19 16:48:09]
cantrepeat :
7of9 was at the wheel
[2018-12-20 13:11:49]
xela75 :
how do you decipher on adb nfz.db ?
[2018-12-20 13:22:23]
cantrepeat :
using sqlite
[2018-12-20 13:23:04]
cantrepeat :
adb kill-server
sudo adb start-server
adb pull amt/nfz/nfz.db
sqlite3 nfz.db
SELECT count(*) from airmap_geofence_polygons;
[2018-12-20 13:23:28]
cantrepeat :
needs to read 0
[2018-12-20 13:23:41]
cantrepeat :
0 = zero NFZ in the db
[2018-12-20 13:28:50]
xela75 :
ah ok it's not possible inside adb shell
[2018-12-20 13:30:04]
xela75 :
thx
[2018-12-20 13:40:50]
cantrepeat :
are you on a windows machine?
[2018-12-20 13:41:15]
cantrepeat :
sorry, I am not aware of a way to check the db in a shell
[2018-12-20 13:41:34]
cantrepeat :
I use winbash for my adb stuff on win10
[2018-12-20 13:41:47]
cantrepeat :
I put sqlite in the same folder as winbash and adb
[2018-12-20 13:44:42]
xela75 :
I have VM for linux
[2018-12-20 13:45:24]
xela75 :
Do you know why sqlite3 does not find "airmap_geofence_polygons" ?
[2018-12-20 13:50:15]
cantrepeat :
I get this by using those commands
[2018-12-20 13:50:21]
cantrepeat :
bash$ sqlite3 nfz.db
SQLite version 3.22.0 2018-01-22 18:45:57
Enter ".help" for usage hints.
sqlite> SELECT count(*) from airmap_geofence_polygons;
0
sqlite>
[2018-12-20 13:51:14]
cantrepeat :
there is a graphical sqlite option you could load and browse the db
[2018-12-20 13:52:11]
xela75 :
Ok thx you
[2018-12-21 01:13:12]
cat.db :
@catalinaskirace then, how？can fly？
[2018-12-21 01:59:48]
cantrepeat :
what?
[2018-12-21 14:05:10]
cat.db :
modify nfz.db
[2018-12-21 14:53:58]
cantrepeat :
In light of recent events I think I'm going to leave modifying NFZ to the user. The information is out there and there are several ways to go about. Sorry man.
[2018-12-21 17:06:51]
cat.db :
me too.I am just curious.
[2018-12-22 06:30:29]
hotelzululima :
!wiki
[2018-12-22 06:41:46]
bobdole :
!dji !wiki
[2018-12-22 22:03:39]
kang :
the wiki seems dead
[2018-12-22 22:05:36]
cantrepeat :
loading for me <http://dji.retroroms.info/howto/start>
[2018-12-22 22:06:13]
cantrepeat :
seems very regional on the outrage
[2018-12-22 22:09:01]
kang :
its back for me :slightly_smiling_face:
[2018-12-22 22:13:26]
kang :
so if you turn off the flight safe stuff in the apk it just doesn't respect nfz according to the wiki o.o lol
[2018-12-22 22:17:56]
cantrepeat :
you looking to close down an airport? :joy:
[2018-12-22 22:19:58]
kang :
nah, i don't even really care about nfz as long as they don't make it stupid
[2018-12-22 22:20:08]
kang :
but it's fun to read how it works
[2018-12-22 22:21:44]
kang :
maybe they should hire a security engineer or something lol
[2018-12-22 22:26:11]
cantrepeat :
yeah I know, it's all digital fun.
[2018-12-22 22:26:54]
kang :
oh and resale value i guess, good to know which fws to update to or not - though in this case it doesn't matter
[2018-12-22 22:27:31]
kang :
anywya, cool that ppl share it. hope nobody flies this in airports again :stuck_out_tongue_winking_eye:
[2018-12-23 12:18:12]
cantrepeat :
!apk
[2018-12-26 01:47:42]
irischnpak :
While flying today the gimbal of my mavic 1 suddenly started to twitch from time to time while flying at higher speeds.
I tried an autocalibration but it didn't help. Anybody knows anything?
[2018-12-26 03:32:56]
lolo780 :
Try a new ribbon cable
[2018-12-26 08:13:27]
good.win.alexs :
Does it pass gimbal calibration routine from Go?
[2018-12-26 08:14:23]
good.win.alexs :
Do you have angles parameters changed? Is it ok on lower speeds?
[2018-12-26 12:55:26]
irischnpak :
Angles parameter in DJI Assistant? No
While at low speeds, everything is fine...
Gimbal has no physical contact other than rubber dampers
[2018-12-26 22:22:28]
sheldon.holy :
The cabe can get damaged quite easily
[2018-12-26 22:22:32]
sheldon.holy :
cable
[2018-12-26 22:22:54]
sheldon.holy :
It's not always that though, people on the forums often scream "ribbon cable" at any gimbal problem, and it is that about 50% of the time
[2018-12-26 22:23:00]
sheldon.holy :
otherwise new gimbal time
[2018-12-27 01:04:31]
lolo780 :
Cable is $10 so easy to try. Every M1 owner should have a spare.
[2018-12-27 01:05:04]
lolo780 :
Video cable too.
[2018-12-27 02:56:53]
fredmicrowave :
Is there a fix for horizon tilting when flying sideways on MP ? I calibrated gimbal and AC but still occurring ...
[2018-12-27 03:05:49]
sheldon.holy :
Yeah definitely @lowellfoo780
[2018-12-27 07:08:53]
lolo780 :
Horizon tilt not really. Just a feature of the M1.
Unless you call an M2P a fix.
[2018-12-27 12:11:44]
fredmicrowave :
Haha, ok lets be optimistic, and say its a great M1 feature.
I do have a M2 but it is too restricted to be really useful - :expressionless: ...Hope new year will bring a way to break its chains and some liberty...
[2018-12-27 12:13:38]
fredmicrowave :
(BTW, i have one M1 with insignificant tilting, but on others it is unacceptable )
[2018-12-27 12:17:59]
cantrepeat :
After flying an unlocked/modded MPP I don't think I'd even consider buying an M2 before rooting/modding is released. It would really feel like being chained.
[2018-12-27 12:45:56]
fredmicrowave :
Indeed. I just recently got mine, and did not fly it yet. I hope and believe we will have some good news soon.
The larger sensor (for low light) and better stabilization ( not tilting nor small jumps in camera movements while panning) are important.
[2018-12-27 12:49:17]
cantrepeat :
I think one of the best features is the ability to rotate the camera separate from the bird.
[2018-12-27 12:53:10]
fredmicrowave :
Really ? Did no know about that. Does it makes a lot of difference to the final image ?
[2018-12-27 13:16:04]
cantrepeat :
well I don't think it changes the image any, but you can hover the drone and just pan the camera now
[2018-12-27 13:16:22]
cantrepeat :
I saw it in a youtube review
[2018-12-27 14:25:11]
fredmicrowave :
Will have to try that :slightly_smiling_face:
[2018-12-27 15:42:41]
mel69hash :
Yes you can long hold on the screen and pan sideways to turn the camera.
[2018-12-27 16:50:58]
lolo780 :
<https://youtu.be/GfKthLo73aA>
[2018-12-27 16:51:05]
lolo780 :
Like that
[2018-12-27 17:07:26]
cantrepeat :
@lowellfoo780 sweeet video
[2018-12-27 17:09:05]
fredmicrowave :
Very nice !
[2018-12-27 18:13:16]
validat0r :
Sweet vid .. But it kind of stops in the middle
[2018-12-27 20:35:24]
lolo780 :
I was just playing around with the m2p camera panning.
What video editing software do you guys use?
[2018-12-27 21:59:36]
chipmangini :
@lowellfoo780 Davinci Resolve is great and the free version is plenty for most people. High system requirements though. It dd a test on my machine before installing to make sure. <https://www.blackmagicdesign.com/products/davinciresolve/>
[2018-12-27 22:29:24]
fredmicrowave :
Been using Powerdirector for years. Good editor, simple to use, not too heavy, had plenty of bugs at its beginning, doing ok now.
(But I would like to use Luts and thinking about trying Premiere)
[2018-12-30 10:03:03]
erwin :
Premiere for sure. I also was a PowerDirector user but premiere feels so solid in comparison. It is like PD was stitched with duct tape. I think I can do fancier stuff in PD tho, if you consider "cheesy" as fancy
[2018-12-30 13:11:06]
fredmicrowave :
Exactly. I was just no sure if Premiere was really better.
Just hoping learning transition will not be too hard...
[2018-12-30 13:21:58]
cantrepeat :
adobe premeire?
[2018-12-30 13:22:36]
cantrepeat :
premiere*
[2018-12-30 14:44:29]
fredmicrowave :
Yes.
There seems to be lots of downloadavle LUTs on the net, that are preadjusted grading filters giving great results. Especially when you film in D-cinelike or D-log.
[2018-12-30 16:04:24]
cantrepeat :
yeah, I went away adobe when they went to subscription based sales
[2018-12-30 16:06:13]
good.win.alexs :
Yeah, few months back i have made decision to finally pay for Parallels Desktop. And realized that it is now being sold under subscription
[2018-12-30 16:06:22]
good.win.alexs :
Viva la TNT :smiley:
[2018-12-30 16:07:15]
cantrepeat :
yeah I hate the idea of renting software
[2018-12-30 16:08:32]
good.win.alexs :
Sometimes its good, but not for big software
[2018-12-30 16:09:05]
good.win.alexs :
For ex., I have on my macbook subscription from Setapp - and i like it
[2018-12-30 16:09:51]
good.win.alexs :
But it is repo of small tools, and subscription is 9.99 per month for everything you may find in their listing
[2018-12-31 13:01:41]
erwin :
Yeah, everyone moving to a service. Constant stream of money. I think if we ask to NLD guys they will love to get 3-5 USD/mo from everyone of us instead of the current payment model lol. You forget after a while how many services you pay montly. I even have that suscription for getting funny socks monthly :rolling_on_the_floor_laughing:
[2018-12-31 16:13:02]
fredmicrowave :
I hate subscription software and never uses them.Besides the economical question, It make me feel tied. I praise too much my independence :laughing:
With all respect to developers, this is pushing too much from potential customers ( one more slaving tax? ) , and probably one of the reasons you can find those softwares "around there" for free...
[2019-01-02 22:42:21]
akerulis2 :
Hello, how can I pach apk file? When I put an apk file in the PutApkHere folder and run the RunMe.bat it shows me the error that it can not find the PutApkHere/orig.apk file... What I need to do to fix it? Please help
[2019-01-02 22:47:37]
cantrepeat :
did you rename the file?
[2019-01-02 22:48:41]
cantrepeat :
did you rename the nosec apk file to orig.apk ?
[2019-01-02 22:49:03]
akerulis2 :
nope
[2019-01-02 22:49:18]
cantrepeat :
Then read the instructions and it might work for you
[2019-01-02 22:49:52]
akerulis2 :
to be specific what instructions? I only found short guidelie in github
[2019-01-02 22:53:09]
akerulis2 :
PS:. it worked... Thanks
[2019-01-04 19:28:05]
irischnpak :
Can somebody tell me in which version of the Mavic firmware DJI implemented DroneID?
[2019-01-04 19:33:34]
quad808 :
01.03.0800
[2019-01-04 19:45:03]
irischnpak :
Do you also know the module?
[2019-01-07 09:17:13]
cs2000 :
Its integrated into the FC module if memory serves me right, you cant just patch it out with a couple of lines of code. If youre worried about it, just stay below .0800
[2019-01-07 12:08:59]
d.cernak :
Is there some consensus on best FW version/modules mix for the old Mavic? I have been using the panorama firmware with 1.03.0700 flight controller modules, but I am having issues with video recording lately, sometimes it stops for no reason and clicking the recorsing button does nothing
[2019-01-07 12:09:56]
d.cernak :
Or could it be because of a shitty sd card? Thanks for any tips
[2019-01-07 12:19:30]
cantrepeat :
For me, and I believe others, v01.04.0300 FC Patched is the go to nowadays.
[2019-01-07 15:13:00]
cantrepeat :
Finally got my Xiaomi Mi Pad 4 from China!!
[2019-01-07 15:14:51]
cantrepeat :
came unlocked with some after market ROM so I'm going to flash Xiamoi stable 10.2 just to make sure there isn't anything sketchy on it.
[2019-01-07 16:37:47]
bobdole :
oh man... gotta love those custom chinese roms with the rootkits and adware
[2019-01-07 16:39:57]
bobdole :
i have a free android headunit (got refunded) that came with a launcher that was pretty obvious - was using bandwidth and had too many permissions
[2019-01-07 16:47:33]
cantrepeat :
yeah, I don't suspect it but I'm not taking any chances with it.
[2019-01-07 23:47:25]
umbr4 :
So just trying to get my bearings with duml, the wiki page <https://dji.retroroms.info/howto/known-duml-commands> has **set date/time** but the duml is incomplete, does anyone know where to send the command to like what the target is? The reference link is buried in the history that is not accessible anymore :disappointed:
[2019-01-08 13:48:20]
mefisto :
Don't know much about that command; but in general, you'll find details on more commands in the dissectors here:
<https://github.com/o-gs/dji-firmware-tools/tree/master/comm_dissector/wireshark>
[2019-01-09 22:03:17]
dji-rev-slack :
Sorry, I've been offline for a few months. What did I miss? Has M2P or M2Z been hacked yet?
[2019-01-09 22:27:25]
andrwho25 :
not yet
[2019-01-10 00:14:33]
dji-rev-slack :
ay...........
[2019-01-10 00:14:49]
dji-rev-slack :
I just got both yesterday.
[2019-01-10 00:15:10]
dji-rev-slack :
some solid upgrades from MP
[2019-01-10 01:29:48]
mstalzer :
question about the fc patcher on my spark: i’ve finally managed to get past where i’ve been stuck (it was an rtfm issue) - but now i boot it up and it says it can’t take off “version mismatch” and then says check firmware version. i’m assuming i skipped a step again or did something else stupid...any suggestions?
[2019-01-10 02:24:52]
bobdole :
what firmware version are you on?
[2019-01-10 02:47:38]
mstalzer :
01.00.0900 - and the FC version number i set was 03.02.43.21, which is the example in the instructions. i’m wondering if i should have set that to a different one.
[2019-01-10 08:24:26]
kilrah :
if it's like on the mavic the most recent firmware won't run with older fc fw
[2019-01-10 08:57:03]
validat0r :
.0900 isn't the most recent.
[2019-01-10 09:35:53]
kilrah :
doesn't necessarily mean it doesn't already introduce a check...
[2019-01-10 12:42:44]
mstalzer :
i’m going to go through the process again after reflashing it to stock 0900, per validator suggestion. i read through it a few more times to try and ID steps i may have screwed up. FC firmware version number is an arg that I will validate is /newer/ than what’s on the bird.
[2019-01-10 12:51:45]
validat0r :
newer isnt so important .. to be able to patch the FC it merely has to be different than the current
[2019-01-10 14:30:07]
bobdole :
could the mismatch be rc or battery firmware?
[2019-01-10 16:29:19]
mstalzer :
redoing it all, as written, worked this time. fc patcher removed nfz, and flys with both stock and modded dji go 4 app. —- now to try the inspire and see if that was also rtfm issues
[2019-01-10 16:29:26]
mstalzer :
thanks for the help guys
[2019-01-10 16:31:49]
validat0r :
so you're on .0900 and have removed nfz? or did you module mix
[2019-01-10 17:53:16]
mstalzer :
i'm on 0900 and removed the NFZ via the FC updater - I still get NFZ warnings because i didn't go purge the NFZ db or backup yet, but i can fly on 0900 without mixing modules. i was apparently skipping a couple commands in two different steps. my reading comprehension didn't do well on this exercise.
[2019-01-10 17:53:54]
mstalzer :
next will be to do the fc mod on the I2, and then purge the NFZ dbs based on what i've been reading. If the fc mod works on I2 then awesome, but if not I'll post whatever errors I get.
[2019-01-10 18:28:09]
validat0r :
is the FC mod on the Inspire even possible? i'm a bit outdated when it comes to the FC Patcher repo
[2019-01-10 18:29:22]
validat0r :
I dev'ed the FC patch with matioupi (well, I tested it, he developed), and to my knowledge he didn't have an Inspire at hand at the time
[2019-01-10 19:39:21]
mstalzer :
there are instructions in the fc patcher github for the i2 - they could be hypothetical, but i believe others have done it. i will certainly report back tonight :slightly_smiling_face:
[2019-01-10 19:40:07]
mstalzer :
even the few times i tried it and skipped steps i was still able to get the FC file and edit the parameters. i just screwed up two important steps that made the repacking step useless.
[2019-01-10 19:41:32]
mstalzer :
also a good reminder to me to contribute some bones to matioupi and others to keep them in drones :slightly_smiling_face:
[2019-01-11 17:59:38]
ricardobrito_348 :
Good afternoon, guys!! I would know if anyone explain to me how can i use the "DankDroneDownloader" (<https://github.com/cs2000/DankDroneDownloader>)? I would know if can i estabelish a comunication with my drone (DJI Spark) trought the DDD? I want estabelish a comunication between my drone and ROS for implement some routines. Can i make this with the DankDroneDownloader? Thxx
[2019-01-11 18:04:08]
validat0r :
No. Ddd is just for downloading Firmware images
[2019-01-11 18:14:45]
fredmicrowave :
Has anyone tried the @evgeniychuiko Fcc mod patch on the M2 RC ?
[2019-01-11 18:16:12]
evgeniychuiko :
@fredmicrowave it wont work, many differences
[2019-01-11 18:19:03]
fredmicrowave :
Ok, thanks.
Just been reding the readme, (should have done it before asking) I see that it needs root, sry .
[2019-01-11 18:20:09]
fredmicrowave :
For M1, i don´t see any advantage on using special ipa over your mod...
[2019-01-11 18:20:32]
evgeniychuiko :
Yeah, m1 mod works really well
[2019-01-11 18:20:51]
fredmicrowave :
It´s fantastic.
[2019-01-11 18:22:42]
evgeniychuiko :
I have some m2 research, but no solution for publish atm, sorry...
[2019-01-11 19:51:13]
bobdole :
@evgeniychuiko thank you so much for that mod! i noticed that it removed the dumlracer root and that by running dumlracer afterwards, the mod stops working. im guessing this is unavoidable, right?
[2019-01-11 20:34:51]
evgeniychuiko :
@jacksphone its because I used persistant method from @jcase (c) exploit. If you want to have Dumlracer and my mod together - use adb_persist.bat for installation.
[2019-01-11 20:53:06]
bobdole :
@evgeniychuiko awesome thanks!!!!!!!!!!!!!!
[2019-01-12 14:38:41]
ricardobrito_348 :
Anyone knows how can i estabelish a interface comunication between ROS and DJI Spark? Thxx :wink:
[2019-01-13 20:09:07]
buuddy :
I'm looking to install Go4 4.1.22 on my phone, but I don't think the app store is still available in iTunes anymore. Any suggestions/ideas on how to get the older version installed?
[2019-01-13 20:12:34]
czokie :
!wiki
[2019-01-13 20:12:36]
czokie :
<https://dji.retroroms.info/howto/iosrollback?s[]=rollback>
[2019-01-13 20:22:12]
buuddy :
@czokie that's where I started. My version of itunes doesn't (seem to) have an ability to download/buy apps. That is where I'm stuck.
[2019-01-13 20:30:12]
buuddy :
The note from @cs2000 on top ```The below guide has been updated to reflect the fact that you actually CAN install IPA's manually using iTunes 12.7 onwards. It was previously reported that this wasn't able to be done after you upgraded past 12.6. Users with iPhone XS can therefore now use this method. Along with recent changes meaning you can no longer disable 2FA once you have enabled it, the guide has been re-written with new information and steps to still allow this to function. This has been manually verified by me (cs2000) on 22/12/2018``` -- I have itunes 12.9 and I think the app store has been removed. Maybe I can rollback itunes.
[2019-01-13 20:34:38]
czokie :
Read again - he is indicating it IS possible to install using 12.7 onwards
[2019-01-13 20:38:05]
andre :
Anyone know if I should be seeing Course Lock on the DJI Spark on 4.3.2?
[2019-01-13 21:20:21]
czokie :
@kilrah - I was just digging myself. According to @cs2000 - he thinks it is possible to use new itunes. I am taking a wild guess here. But "Apple Configurator 2" is not available for Windows users, so for Windows, they have possibly put the app feature back into iTunes. For Mac users, they would be pushing people to use configurator. I am just guessing.
[2019-01-13 21:20:36]
czokie :
I just tried it on my mac, and I agree - its not there - no apps tab
[2019-01-13 21:41:38]
kilrah :
suggests you can use it to **install** an ipa you already have but not to **download** it from the app store
[2019-01-13 21:50:10]
cs2000 :
Sorry guys I don’t really understand the confusion
[2019-01-13 21:50:27]
cs2000 :
You don’t need the apps tab at any stage as far as I can tell?
[2019-01-13 21:50:42]
kilrah :
you do to download old versions
[2019-01-13 21:51:53]
cs2000 :
Why? Once you download the app (any app) the IPA itself is in %appdata%\apple computer and then some folder in there.
[2019-01-13 21:52:17]
kilrah :
the current version yes
[2019-01-13 21:52:58]
kilrah :
(it's actually in "my music\itunes\mobile applications")
[2019-01-13 21:53:16]
cs2000 :
Sorry, backups go in that other folder, you’re right
[2019-01-13 21:53:43]
kilrah :
and in itunes versions past 12.6 you can't download apps at all anymore
[2019-01-13 21:54:08]
cs2000 :
What, as in theirs no App Store built into it iTunes?
[2019-01-13 21:54:15]
kilrah :
computer download and storage of ipa's was completely deprecated and stripped out
[2019-01-13 21:54:22]
kilrah :
no
[2019-01-13 21:54:51]
cs2000 :
Wow, that’s...stupid!
[2019-01-13 21:56:05]
cs2000 :
So basically I need to edit the guide then, you need the older iTunes to physically download the app, then you can use the newer iTunes to sync it if you have a phone like the X and onwards that don’t communicate with the older versions
[2019-01-13 21:56:24]
kilrah :
or use ifunbox to load the app
[2019-01-13 21:56:48]
cs2000 :
True :+1:
[2019-01-13 21:57:07]
cs2000 :
Il sort it tomorrow
[2019-01-13 21:58:06]
kilrah :
apple specifically released a last version of 12.6 after 12.7 that wouldn't autoupdate for those people who want to manage apps
[2019-01-13 21:58:31]
kilrah :
i have that installed plus ifunbox, i download with itunes then load with ifunbox
[2019-01-13 21:59:05]
kilrah :
best way since you can't have 2 itunes versions installed on the same computer
[2019-01-13 22:19:44]
chipmangini :
I'm using iTunes 12.6 and it works great for apps. I'm JB though, but I don't think it matters. It's available here: <http://osxdaily.com/2017/10/09/get-itunes-12-6-3-with-app-store/>
[2019-01-13 22:39:22]
buuddy :
nice. thank you
[2019-01-14 00:57:12]
nikogpsy :
I use itools4. Much cleaner UI than ifunbox IMO.
[2019-01-14 02:18:35]
cantrepeat :
but fun box sounds so much more dirty!!
[2019-01-14 09:36:47]
cs2000 :
So just to clarify, the only issue with the guide is
3. In iTunes, log in to your account and search for DJI Go 4 in the app store
itunes no longer has an app store, so you need to install iFunBox and so the same steps in there, right?
[2019-01-14 09:38:43]
cs2000 :
and step 15 too as its the same step but repeated
[2019-01-14 09:44:28]
czokie :
Downloading an ipa for rollback requires old iTunes. I don’t know that there is any replacement process. There is a method to install an already existing ipa with iTunes if it had a valid signature. But that’s another story.
[2019-01-14 10:05:17]
cs2000 :
Hmmm ok, some just need to add another step in (or a few
[2019-01-14 10:05:42]
czokie :
:slightly_smiling_face:
[2019-01-14 10:05:54]
czokie :
But I was interested in that app as an alternative to ifunbox. Looks cool
[2019-01-14 13:08:19]
cs2000 :
Wiki has been edited to ensure you have 12.6 installed first (to get the app) then install the newer versions afterwards :slightly_smiling_face:
[2019-01-14 17:17:25]
flyingkite :
I have itunes 12.6.5.3 and I'm able to sync using my iphone XSmax. No issues syncing apps to phone.
[2019-01-14 19:30:44]
buuddy :
@cs2000 @flyingkite - From what I'm reading, you can't install 12.6 on the latest macos mojave unless you take a route that involves disabling sip, deleting all the old files, and editing the installer in 12.6. I'm going to just go the windows route and try that. Thank you for the help and the wiki.
[2019-01-14 19:31:50]
buuddy :
@flyingkite do you use 4.1.22 on your xsmax?
[2019-01-14 19:32:53]
buuddy :
!wiki
[2019-01-14 21:32:57]
buuddy :
I'm currently on the latest version of everything, and from what I've been reading, I don't think that's where I want to be, I think my goal is to be able to use the iOS app 4.1.22 (since it has iphone-x support) and remove the NFZs. Not even to fly against the rules -- dji is treating an airfield that does 200 flights per year the same as it does an airfield that has 2000 flights a day. I'm not sure what firmware I want to on, probably 1.4.3. -- Does this sound right? Can you have iOS 4.1.22 and not have the new NFZs?
<http://dji.retroroms.info/howto/nfzbypass> -- references android only. Is there an iOS approach?
<https://www.rcgroups.com/forums/showthread.php?3058818-Rooting-Mavic-Pro-in-Latest-firmware-with-Force-FCC-and-Boost-and-No-NFZ> -- Looks helpful, android focused, but says has links to ios parts. Still reading...
[2019-01-14 21:33:34]
flyingkite :
@buuddy I only tried 4.1.22 stock and it did work. But since I have the Mav2, 4.1.22 doesn't support it.
[2019-01-14 21:33:52]
buuddy :
@flyingkite gotcha, thanks.
[2019-01-14 21:34:49]
flyingkite :
I tried 4.1.22 on the XSmax with my mav1, spark and air. All worked perfectly
[2019-01-14 22:17:44]
buuddy :
@cs2000 I'm trying to follow your wiki page that now includes the link to itunes 12.6 -- i'm using a windows laptop now. I'm stuck b/c my account has 2FA and while I have generated an app-specific password with your instructions, Every time I try to sign into itunes with it, it fails with "your apple id or password is incorrect". I've tried with 3 app specific passwords and i'm confident that i'm not just typing it wrong. You wrote that you were able to do this, did you run into this issue or overcome it?
[2019-01-14 22:19:57]
czokie :
@buuddy - Are you trying to do a rollback to a specific version (with no modification), or do you want to install a tweaked/modified version?
[2019-01-14 22:29:55]
buuddy :
@czokie rollback with no modification, at least for now. I'm honestly not clear on what I want to do, but it's iOS and not jailbroken so I suspect I'm limited.
[2019-01-14 22:30:52]
buuddy :
I'm still learning, and might go with the no limit drones package, but I think I still need to rollback first.
[2019-01-14 22:32:01]
czokie :
What is the reason to want to rollback?
[2019-01-14 22:32:34]
buuddy :
Primarily the new NFZs.
[2019-01-14 22:33:30]
czokie :
So - at least for testing, you can play with the releases here... <http://dji.retroroms.info/howto/firmware#dji_go_4>
[2019-01-14 22:33:47]
czokie :
Those are decrypted ... but you'll need impactor etc to install them
[2019-01-14 22:34:35]
czokie :
At least with them - you'll find out if older versions will meet your needs. Those have frida injected, but no tweak file... so basically, standard apps - but able to be modified if required.
[2019-01-14 22:34:56]
buuddy :
Yeah, there is a ton I don't know. I grabbed that ipa and when I installed it wouldn't launch (not signed), and then I was trying to go for the method where I intercept itunes via charles proxy, but no luck there with the 2FA.
[2019-01-14 22:35:18]
buuddy :
I'll search for impactor/a way to install them. If I need to jailbreak though, I can't do that.
[2019-01-14 22:35:42]
czokie :
You only need to intercept for download via itunes. Install should not be related to that.
[2019-01-14 22:36:04]
czokie :
Install would not require charles... There are many people using those IPA's in ~ios_ipa_reversing
[2019-01-14 22:36:33]
buuddy :
That's where I'm stuck though. Does using one of the ipas you linked to require that I jailbreak?
[2019-01-14 22:37:49]
czokie :
Its easier if jailbroken - but not required - Those files can be installed and will work for 7 days self signed... There is a crew (myself included) working on a process for longer term signing... Until then, its 7 days without jailbreak - then reinstall
[2019-01-14 22:38:59]
buuddy :
Ok, good to know. Apologies for the dummy questions. Are you the same guys behind NLD ?
[2019-01-14 22:39:12]
buuddy :
i.e. If I paid there, does that support this development?
[2019-01-14 22:39:21]
czokie :
100% correct.
[2019-01-14 22:43:42]
buuddy :
Ok, so looks like lots of work is in progress, I'll pay attention in the ios_ipa_reversing channel and just read up for a bit.
[2019-01-14 22:44:15]
buuddy :
No issue with paying NLD, especially because rollback of the firmware would be my next challenge and the FAQ there says 1.0.0.3 will help there.
[2019-01-14 22:45:08]
buuddy :
fwiw, I am still having trouble with the itunes sign-in due to 2FA, and if I get past that i'll be sure to post here.
[2019-01-14 22:45:16]
buuddy :
@czokie thank you
[2019-01-14 22:49:34]
czokie :
FYI - I am not playing with the download side - I use current versions of iTunes - Someone else is doing the downloads... so I am not up-to-date with some of that.
[2019-01-19 03:26:25]
lonelynok :
Anyone can tell me how to find orig.apk?
[2019-01-19 05:52:50]
senditout1 :
I found this forum using Google. I just bought a used Phantom 4 and I'd like to modify the parameters to remove NFZ restrictions. I'm willing to pay someone to help me.
[2019-01-19 05:52:58]
senditout1 :
Here are my firmware versions.
[2019-01-19 05:52:58]
senditout1 :
App 4.3.11
Aircraft 1.9.3
Precision Fly Safe Database (Aircraft) 01.00.01.12
Precision Fly Safe Database (App) 1.00.01.12
Basic Fly Safe Database 01.00.01.03
[2019-01-19 06:26:17]
bobdole :
@lonelynok are you referring to deejayeye-modder? If so you just put the apk you want to mod in there. I think most are using 4.1.22... <http://www.openpilotlegacy.org/dji.go.v4-4.1.22-3028592-noseceo.apk> If you stick it in Putapkhere/ directory and rename it to orig.apk you should have what you're looking for
[2019-01-19 06:27:35]
bobdole :
@senditout1 [nolimitdronez.com](http://nolimitdronez.com) is for you
[2019-01-19 10:13:30]
lonelynok :
Thanks!!!
[2019-01-20 09:02:30]
samroesch :
Hi - firstly thanks to all who have contributed to the various DJI hacks, so much capability unleashed! Can't thank enough. Just want to confirm, in case I've missed something - Is it possible to fly in a NFZ with DJI Go on iOS? My spark has modded firmware, so it's ok, and using the tweaked DJI Go app, but it still has NFZ restrictions coming from the app. Is there a way to load a blank NFZ database to the app?
[2019-01-21 04:09:26]
samroesch :
With nothing else left to try, I deleted the Flysafe database from the .ipa, app crashed pretty soon after loading, also tried disabling location services for app, somehow it still new its location, seems to be getting it from the drone.
[2019-01-21 07:57:51]
elintnl :
Here you can find a nice tool for analysis of your flight : <https://forum.dji.com/forum.php?mod=viewthread&tid=145649>
[2019-01-21 10:10:46]
cs2000 :
@samroesch depends, if youre running a Mavic, yes, rollback to V01.03.0700 and either use NLD to disable it, or use the parameter editor with Assistant 2 in debug mode.
[2019-01-21 10:11:02]
cs2000 :
If you feel like it, you can rollback your iOS DJI Go4 and use FCC mode too <https://dji.retroroms.info/howto/iosrollback>
[2019-01-21 11:16:51]
samroesch :
I’m using the latest IPA (4.3.10) from the retroroms site, that @czokie uploaded. Is there a preferred IPA I should load instead?
[2019-01-21 11:17:47]
cs2000 :
If you just want NFZ, no it doesnt matter, it depends on your firmware
[2019-01-21 11:18:24]
cs2000 :
If you want FCC, then yeah you can use the Frida modified apps, or rollback to 4.1.3(i think) and use FCC that way.
[2019-01-21 18:45:50]
samroesch :
Thanks @cs2000, but I think I’m back at square one then, I’ve loaded custom firmware, so drone doesn’t care about NFZ, but Dji Go 4 won’t let me take off because IT knows I’m in a NFZ. Maybe I’ve missed something super noob? I’ll try 4.1.3.
[2019-01-22 04:26:34]
samroesch :
Replaced the djiflysafe areas.db with a blank file, seems to have worked! No crashing, no NFZ’s on the map :tada:
[2019-01-22 18:47:30]
marijus75 :
Hi. Looking for a method to modify the Spark firmware to get FCC mode (like jkson_fcc_mod for Mavic Pro or P4Pv2). Can you help me?
[2019-01-22 18:54:06]
validat0r :
@marijus75 just use the modded app from ~android_apk_patching
[2019-01-22 18:54:38]
validat0r :
Don't need to mod the fw for fcc
[2019-01-22 18:56:26]
marijus75 :
I use iPhone 6+
[2019-01-22 19:00:13]
marijus75 :
I tried Fake GPS with android phone. After Spark switching off/on fcc mode changes to ce.
[2019-01-22 19:03:06]
validat0r :
Ask in ~ios_ipa_reversing
[2019-01-22 19:03:53]
marijus75 :
What about @evgeniychuiko Fcc mod for Spark? Anybody tried this?
[2019-01-22 21:29:15]
sframeligiacomo :
!apk
[2019-01-25 03:21:45]
clarxionzz :
Hello, does anyone have newest DJI Go 4.3.12 IPA file unencrypted? Many thanks
[2019-01-26 20:34:12]
tangerine62 :
you are in fcc; if you test fcc with the otg cable attached you will get odd results, but you ARE in fcc as long as you tap cancel after app startup @marijus75 and use latest app/firmwares
[2019-01-31 18:59:57]
cantrepeat :
!apk
[2019-01-31 19:04:03]
007 :
For those that want it - IPA with Frida etc - Just install Tweak.js for fun - <http://polybotes.feralhosting.com/dji/Go4_Frida/DJI%20GO%204%204.3.12-frida.ipa>
[2019-01-31 22:03:42]
czokie :
NOTE: This IPA has completely different code in it to the older ones. Many of the tweaks wont work. I intend to dig some more early next week for alternatives to tweaks that are not working any more
[2019-02-01 04:47:25]
007 :
:+1:
[2019-02-03 06:43:57]
socrates4242 :
Just picked up a used mavic pro platinum, ver 1.4.0100 I'm getting conflicting options if it needs a hardware mod or just software. Trying to modify NfZ
[2019-02-03 12:08:25]
validat0r :
Just software
[2019-02-03 12:08:40]
validat0r :
!wiki should have you covered
[2019-02-03 16:28:15]
teslahv :
Hi there, just one question: if I may choose between Bird fw 01.04.0000, 01.04.0100, ..., 01.04.0500 then what is commonly known as the most reliable one in terms of gimbal resets, AC disconnects, fly-aways..?
[2019-02-03 16:30:24]
teslahv :
I used to fly 01.04.0300 until 01.04.0500 for several flights without any issues except occasionally gimbal reset and one IIRC AC disconnect though temporary only.
[2019-02-03 16:31:49]
teslahv :
MPP unopened so everything below 01.04.0000 should be a no-go for me.
[2019-02-03 17:45:57]
cantrepeat :
you don't need to go below 01.04.0300 to do anything with a MPP
[2019-02-03 18:55:54]
teslahv :
Confirm that when going from 01.04.0300 to 01.04.0500 in total the only changes relevant for a MPP/MPP-RC were:
01.04.0300 to 01.04.0400:
- changed android system to remove root (1301, 0801, 0805)
- altered ESC fw (1200)
01.04.0400 to 01.04.0500
- N/A
Correct?
Thus I suppose if I was used to 01.04.0500 I should go with a module mix 01.04.0400 -0801/0805/1301 (RC) and I would have the same Motor performance without losing root
[2019-02-04 17:55:02]
quad808 :
@teslahv dude, stay on 01.04.0300. No reason to go any higher. None. No improvements for Mavic going forward, only security fixes to mess you up.
[2019-02-04 18:54:50]
teslahv :
What about the propulsion update MINUS the android update?
Still no reason for an MPP?
[2019-02-04 19:00:38]
quad808 :
nah, no reason. I have a MPP...will never go off of 01.04.0300.
[2019-02-04 19:00:50]
quad808 :
Custom FC is what you want.
[2019-02-04 19:01:03]
quad808 :
Total freedom.
[2019-02-04 19:03:00]
teslahv :
One more question: I'm trying to find some pointers as to what makes the anti-rollback work that prevents us from going from 01.04.0100 to 01.03.0XXX. Is it hardcoded in the new wm220.cfg files?
[2019-02-06 22:46:05]
teslahv :
Has anyone used pyduml in conjunction with Linux on a tty?
First of all it does not find "usb0" since it was renamed to enpSomewhat.
Then when I tried to set up (bind enpSomewhat to 192.168.42.1) manually with ip command I got 2 IP addresses pointing to the same IF.
Now when I commented out the pyduml code which sets up the IF (Seems to be set up already) I got a strange error "Invalid Selection" upon running the pyduml and selecting 2 for "RC".
Anyone using pyduml on Linux in general?
[2019-02-06 22:47:10]
teslahv :
On Mac everything works like a charm.
[2019-02-06 22:47:55]
teslahv :
Ofc I tried with sudo where necessary in my Arch Linux.
[2019-02-07 05:39:01]
bin4ry :
i have done everything with pyduml on linux the whole tcp rc flashing code was done on my ubuntu machine.
[2019-02-07 15:48:51]
teslahv :
Did you use it in a console within desktop manager or in a "native" tty?
[2019-02-07 16:34:53]
bin4ry :
console within my desktop, just checked on manjaro with kde, works too
[2019-02-07 17:51:33]
teslahv :
So another question, is a set_ip_addr still required if "ip addr show" on Linux already shows that enpSomewhat has IP 192.168.42.3?
Somehow it then cannot set that IF to 192.168.42.3.
[2019-02-07 17:52:10]
teslahv :
*to 192.168.43.1
[2019-02-07 17:52:28]
teslahv :
*42
[2019-02-07 18:20:21]
bin4ry :
just comment out the part from the script where it does the ifconfih stuff! what happens is duml1 duml2 ftp to 192.168.42.2 duml3 duml4. for that ftp part you need an valid address, so if you have 42.3 already it should be fine to speak to 42.2 , to make it proper adapt that line to the up tool instead
[2019-02-07 18:20:26]
bin4ry :
*ip
[2019-02-07 18:21:02]
bin4ry :
and yes you can set multiple ips with the tool, just remove the old one before you set the new one
[2019-02-07 18:21:03]
teslahv :
Uh ok, gonna try that
[2019-02-07 18:22:17]
bin4ry :
i thin you can skip the whole check network stuff
[2019-02-07 18:25:11]
bin4ry :
ip addr flush dev enp0
[2019-02-07 18:25:13]
teslahv :
Funny enough, while the RC was easy to flash with Mac OS, upon attempting to flash the bird I got a serial connection error (Device not configured).
[2019-02-07 18:25:38]
teslahv :
Ok looks like I'm gonna try on Linux once more
[2019-02-07 18:25:38]
bin4ry :
removes all addresses from the device
[2019-02-07 18:25:41]
bin4ry :
then add it
[2019-02-07 18:25:54]
teslahv :
Yeah ty
[2019-02-07 18:26:00]
bin4ry :
then run the script work the check network skipped
[2019-02-07 18:26:08]
bin4ry :
it SHOULD work :see_no_evil:
[2019-02-07 18:26:45]
bin4ry :
but as i usually say. once you worked it out, pullrequests are welcome :wink:
[2019-02-07 18:27:38]
teslahv :
Oh yeah why not? Not even thought about that!
[2019-02-07 18:53:47]
teslahv :
Wow, now it initiated the upgrade, though still on the Mac and still connected to same USB port :)
[2019-02-07 18:56:37]
teslahv :
Will try on Linux somewhat later then
[2019-02-07 19:04:58]
teslahv :
Between a firmware flash and a refresh flash with the very same fw, am I recommended to do a power cycle? Am I suggested to remove and again attach the USB cable?
[2019-02-07 19:05:42]
teslahv :
Or leave everything up and running, attached, and simply flash over?
[2019-02-07 19:07:20]
teslahv :
What about adb shell in between? (Lucky to be in spoon-feeding, deez questionz ....)
[2019-02-07 19:15:22]
teslahv :
Seems like with Dumldore we restart the AC and then attempt to reconnect and flash over again
[2019-02-07 19:36:30]
teslahv :
Re-flashing with the same FW appears to give an error for me.
[2019-02-07 23:50:54]
teslahv :
Though I still cannot enter e.g. 800 m
[2019-02-08 17:33:19]
teslahv :
Though with 619 m I was well able to fly above 120 m!
Thanks for all who made that possible!
[2019-02-08 17:38:01]
teslahv :
Will myself reiterate about the workarounds I did and then likely issue some pull requests.
[2019-02-08 18:25:36]
kbgroning :
Just set it to a legal height, so no one knows it is tweaked :innocent:
[2019-02-08 18:49:43]
teslahv :
Allegedly here in Switzerland when there's neither a limited fly zone (150 m AGL, e.g. Zürich-City) nor a NFZ (Zürich Airport) then you are allowed to fly to inf m AGL. At least I remember having read such.
[2019-02-08 18:51:15]
teslahv :
(Assume that your eyes allow for an inf VLOS flight)
[2019-02-08 18:51:24]
teslahv :
:see_no_evil:
[2019-02-13 19:00:44]
alex.valentine :
Is this called spoonfeed because people ask newbie question here?
[2019-02-13 19:00:48]
alex.valentine :
Because I have one
[2019-02-13 19:04:57]
validat0r :
just ask
[2019-02-13 19:19:58]
quad808 :
I have one. Why is the sky blue?
[2019-02-13 19:20:21]
bobdole :
why does jesus have blue eyes
[2019-02-13 19:25:26]
alex.valentine :
The phantom 3's, the ones that have the sd camera in the actual camera body, right behind the sensor, how do they save a video to the sd card
[2019-02-13 19:25:34]
alex.valentine :
not exactly but the dumbed down process
[2019-02-13 19:27:40]
alex.valentine :
ah f it ill just post the whole problem
[2019-02-13 19:27:43]
alex.valentine :
Please note I have tried everything already so bear with me, I am sorry if this is a long post. The camera and gimbal on my Phantom SE are working perfectly fine, the gimbal is smooth balanced and quiet. The live feed through the camera to my phone is perfect. But when I go to record a video the record button just freezes. It will only record at 720p, if I go over that it seems to overload the board or something and after 10 or so seconds of being unresponsive it spits out a "Invalid sd card" message. Now I know my sd cards are all perfectly functional, formated correctly (from inside the drone) and definitely fast enough (all 100MB/s write and read). I have done a lot of messing around trying different things.
For example, if I take a photo, no problem, perfect. If I wait 10 seconds and snap another, perfect it works.But if I take a photo and then 2 seconds later snap another it will dim the shutter button and then seem like it's trying to record the second picture as if it's blocked up a cache or something.
Similarly if I try to take a video over 720p it seems to "overload" the camera and sd card with too much information too fast, i hope you know what I mean, I'm sorry if I'm not making sense. It's as if the camera is biting off more than it can chew and then shitting the bed and reporting "sd card error".
I have tried a ton of things already, taking everything apart to inspect it, cleaning all components thoroughly etc. But if I don't know what I am looking for it's harder.
My question is this. I have a Phantom SE, which has the memory slot on the same board as the image sensor, like in this picture you posted:
<https://github.com/o-gs/dji-firmware-tools/wiki/WM321-Camera-sensor-board>
So that should narrow down the search for problems to that board correct? What should I look for? Again I am sorry if I am not making sense, and for writing an essay. I'm a college student with no cash for a new gimbal/camera and also a computer enthusiast who be proud to have figured this out on his own. Thank you for your time.
[2019-02-13 19:34:27]
alex.valentine :
[2019-02-13 19:34:39]
alex.valentine :
[2019-02-13 19:34:50]
alex.valentine :
[2019-02-13 19:35:10]
alex.valentine :
[2019-02-13 19:39:52]
validat0r :
@mefisto nice shots for your collection
[2019-02-13 19:41:17]
alex.valentine :
yeah rare shots too
[2019-02-13 19:41:36]
alex.valentine :
off a phantom se, pretty rare apparently cause i cant get ANY INFOR ANYWHERE
[2019-02-13 19:42:08]
alex.valentine :
that third picture, with the ambarella chip, am i blind or
[2019-02-13 19:42:28]
alex.valentine :
if you zoom in on the top right side is that burnt messed up circuits
[2019-02-13 19:45:40]
alex.valentine :
at first I thought it was just a sharpie marking but now...
[2019-02-13 19:47:50]
validat0r :
could be
[2019-02-13 21:35:42]
chipmangini :
@alex.valentine Have you tried a better/high speed SD Card? It sounds like it just can't write the data fast enough...
[2019-02-13 22:04:12]
cantrepeat :
yeah, the amount of difference between SD cards can be very dramatic
[2019-02-13 23:59:42]
alex.valentine :
@chipmangini @catalinaskirace yeah guys I started with the recommended by manufacturer Sandisk Extreme which is 60mbs write and then when i read it might need more speed i got a Sandisk Extreme Plus, which is 90mbs write. People on forums are reporting that they are using the Extreme Plus to record 4k60 on their p4ps, so I think SD cards are not a problem. I suspect it has something to do with compression, as @mefisto helped me understand
[2019-02-14 00:00:32]
alex.valentine :
Also I've tried in total maybe 20-30 cards, some I own and some borrowed from friends, same problem on all of them
[2019-02-15 01:33:08]
sheldon.holy :
@alex.valentine I've seen this exact issue before. The video encoding board (with the ambarella soc) was dodgy. Replacing it fixed the issue, didn't bother going any further in depth with it.
You can replace it with a board from a p3s but then it'll shit itself when you update the firmware.
[2019-02-15 01:53:17]
alex.valentine :
@sheldon.holy Thanks! Do you know if by shit itself means brick it? Or will the update just fail?
[2019-02-16 11:39:54]
teslahv :
Are you supposed to open FLYnnn.DAT, which where pulled by "adb pull", by CsrView for Mac too? All of my DAT files read const 0 RPM motor speed for me!
[2019-02-16 11:42:00]
teslahv :
..though 5 of them are 300 MB in size!
[2019-02-16 13:26:34]
kilrah :
yup
[2019-02-16 22:52:33]
teslahv :
Ofc you are. It is just so since an unknown date no more FLYnnn.DAT are recorded when flying. I removed all but one record and restarted the MPP. Afterwards I armed and throttled up the motors. When viewing the file just generated in CsrView with the "Motor Speed" SigPlayer I was able to see the RPM curves corresponding to the throttle input.
[2019-02-17 07:18:48]
teslahv :
(File pulled over adb)
[2019-02-18 20:21:04]
the.hope.ltd :
hello
i need help
[2019-02-18 20:21:26]
the.hope.ltd :
how to use diffrent esc and motors on p4
[2019-02-19 03:40:20]
bobdole :
got a new mavic pro platinum never activated.. how do you activate it in deejayeeye patched 4.1.22 ?
[2019-02-19 04:08:13]
lolo780 :
What are your goals?
[2019-02-19 04:08:39]
lolo780 :
(For the p4)
[2019-02-19 04:09:37]
lolo780 :
Isn't activation an assistant/dumldore thing?
[2019-02-19 04:09:48]
bobdole :
oh thats right... thanks
[2019-02-19 05:57:58]
teslahv :
Do you guys know of a way to get back the old synced FlightRecords if I don't have another mobile device? Obviously on the primary device I cannot let my DJI GO 4.2.24 talk to the internet, forced FW upgrade and such. Not afraid at all of forced NFZ updates though. So from that GO app I cannot sync the former FlightRecords.
There is former records since I once or twice wiped the app.
[2019-02-19 06:00:46]
teslahv :
And yes, I highly officially activated the drone/app back in the days.
[2019-02-19 20:11:24]
teslahv :
Ok slightly different question: Does DJI GO 4 make problems if I let it into the internet WITHOUT having the bird/RC connected?
Say AC/bird connection and DJI GO 4 with internet are mutually exclusive.
[2019-02-19 20:12:29]
teslahv :
Will it still download the newest firmware and then next time even without internet access force to download that firmware?
[2019-02-19 21:05:24]
lolo780 :
I don't think it compares firmware until the AC is connected.
[2019-02-19 21:09:42]
teslahv :
Ok, I will try at some point.
[2019-02-20 08:35:30]
mel69hash :
I've been flying in airplane mode and once done and disconnected everything then I sync to DJI to update the flight log. Will this act do harm to my hacked and rooted MP with patched FW. Been doing this and all well
[2019-02-20 09:48:47]
cs2000 :
@teslahv, Lolo is correct, until you connect a bird, its a dumb app, it doesnt "know" anything. Your firmware is checked against the latest firmware when the bird connects to the app.
[2019-02-20 17:41:49]
teslahv :
Ok, so I synced my Flight Records with DJI. Now they know I modded my bird. How do I know about my earlier flights now?
[2019-02-20 17:41:57]
teslahv :
:smirk:
[2019-02-20 17:42:30]
teslahv :
(The ones not within the current installation of GO 4)
[2019-02-20 17:43:16]
teslahv :
Should I delete to GO 4 App and re-download?
[2019-02-20 17:52:50]
teslahv :
Ok possibly they were never actually uploaded to DJI servers back in the day so everything from more than 6 months might be lost forever.
Somehow I don't think the records are uploaded automatically...
[2019-02-20 17:55:34]
validat0r :
I save my flight records / FLYxxx.DAT files on my own. Small script on the AC which copies them to the SD card and then gets stored on my NAS together with photos/vids. this is nothing DJI has to know.
[2019-02-20 22:39:11]
teslahv :
The flight records that show up in GO 4 and that aren't used to diagnose faulty AC behavior?
[2019-02-21 00:21:36]
lolo780 :
The aircraft .dat files have much more detail
[2019-02-21 00:26:10]
lolo780 :
<https://i.imgur.com/U72wknT.png>
[2019-02-21 00:27:01]
lolo780 :
<http://datfile.net/>
and with csview you can plot things like watt seconds per horizontal and vertical meter
[2019-02-21 06:38:05]
teslahv :
Yeah I know but that's overkill for just getting maximum height, flight time, flight date, and distance flown?
I mean yes, you could get that data. But isn't there a format/file that does only contain the relevant data?
How does the GO 4 app render "your flight list" that is displayed alongside experience level and so? Merely looking for that info, already extracted and rendered.
[2019-02-21 17:18:22]
dgrauwickel :
Hey guys, After using the DJJ_FC_patcher method my firmware version shows 00.00.0000.(MPP on 1.04.0300). Is this normal or did I make a mistake during the process... The bird is fully unlocked and seems to be fine... Just curious and wanted to make sure I didn't zig instead of jag!!!! Thanks!
[2019-02-21 20:58:36]
cantrepeat :
It’s fine.
[2019-02-21 20:59:02]
cantrepeat :
Fc patched fw shows as that in nld. No worries
[2019-02-21 20:59:23]
cantrepeat :
There is an update coming that addresses this.
[2019-02-22 00:42:38]
dgrauwickel :
Thanks!
[2019-02-22 14:03:26]
tawetavo :
```
/tmp/firmware $ python3 /git/dji/dji-firmware-tools/dji_imah_fwsig.py -vv -u -i wm240_1100_v02.74.06.08_20180801.pro.fw.sig
wm240_1100_v02.74.06.08_20180801.pro.fw.sig: Opening for extraction and un-signing
Error: Unexpected magic value in main header; input file is not a signed image.
/tmp/firmware $ xxd wm240_1100_v02.74.06.08_20180801.pro.fw.sig | head
00000000: 494d 2a48 0200 0000 8069 0100 0000 0000 IM*H.....i......
00000010: e000 0000 0001 0000 a067 0100 8069 0100 .........g...i..
00000020: 0000 0000 0200 0400 5052 414b 5546 4945 ........PRAKUFIE
00000030: 96cd dd09 f0b0 9b6d 3ff6 edc6 48b3 6f25 .......m?...H.o%
00000040: 3131 3030 0000 0000 0000 0000 0000 0000 1100............
00000050: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000060: 4254 5259 0806 4a02 0308 1820 0e6d 8aac BTRY..J.... .m..
00000070: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000080: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000090: 0000 0000 0000 0000 7c18 b71b 0100 0000 ........|.......
```
[2019-02-22 14:04:45]
tawetavo :
per <https://github.com/o-gs/dji-firmware-tools#dji_imah_fwsigpy> `DJI Firmware IMaH Un-signer and Decryptor tool; allows to decrypt and un-sign module from .sig file which starts with IM*H. `
[2019-02-22 14:06:15]
tawetavo :
trying to use dji_imah_fwsig.py vs mavic2 firmware, has IM*H header, reports bad header. What am I doing wrong?
[2019-02-22 14:48:09]
xela75 :
I think this version does not support M2 fimware
[2019-02-24 08:02:01]
teslahv :
Besides that I noticed that at least 2 of my ESCs had not been flashed properly. Some were on .72 FW from 01.04.0400 and above (had 01.04.0500 on it before modding began), and some were on .71 from 01.04.0300 or less.
I assume having bought the bird with 01.04.0200 or 01.04.0300 on it and then I upgraded as soon as new fw became available.
[2019-03-03 16:01:13]
teslahv :
Need be spoonfed sry:
In windows batch what does
echo(
echo hello world
echo(
do?
[2019-03-03 16:31:46]
bobdole :
it launches the nukes
[2019-03-03 16:33:08]
bobdole :
it is a beginner's starting code that should just print hello world to stdout... it just responds hello world
[2019-03-03 16:39:11]
cantrepeat :
Can confirm nukes launched!! Peace out!
[2019-03-03 16:40:07]
cantrepeat :
Echo is a command to either display text or not
[2019-03-03 16:40:23]
cantrepeat :
Ie echo on hello world
[2019-03-03 16:40:33]
cantrepeat :
Or echo off
[2019-03-03 16:41:18]
cantrepeat :
Back when a gui was ascii
[2019-03-03 16:41:25]
cantrepeat :
Lol
[2019-03-03 16:43:06]
bobdole :
holy shit... <http://helloworldcollection.de/>
[2019-03-03 19:57:51]
teslahv :
Oh sry I meant what does the parentheses do there
I know
- @echo off
- echo.
- echo
But what is echo( ?
[2019-03-03 20:03:50]
pross :
`<https://stackoverflow.com/questions/132799/how-can-i-echo-a-newline-in-a-batch-file/3123194#3123194>`
[2019-03-06 19:13:17]
borillion_star :
I think I asked this before but is there anything better than 4.1.22 atm? It draws funny on my PXL3 and I really don't want to get an extra device LOL
[2019-03-06 19:29:00]
cantrepeat :
It is the latest GO app to have secno removed so it can be patched.
[2019-03-06 19:34:18]
cantrepeat :
Nosec*
[2019-03-06 19:45:22]
quad808 :
@borillion_star you can fix this by changing the DPI of your device. I have a Huawei M5 and I have to change the dpi from 359dpi to 320 to have 4.1.22 GO, (in my case NLD GO) display the maps correctly.
[2019-03-06 20:08:17]
borillion_star :
I'll try that thanks :)
[2019-03-11 07:08:22]
kbgroning :
Completely unlimited spark, no nfz, no gps problems, no fw shit and enough power <http://a65.tinypic.com/302yiq0.jpg> <http://a66.tinypic.com/2nbaf6c.jpg>
[2019-03-11 08:07:55]
validat0r :
Nice work
[2019-03-11 08:52:09]
kilrah :
It's not a spark anymore :joy:
[2019-03-11 16:36:55]
teslahv :
Can we have the Mavic stable in air with VPS but without compass due to compass malfunction?
[2019-03-11 16:45:35]
kbgroning :
You mean acro/manual mode
[2019-03-11 17:36:56]
teslahv :
Not quite, I was referring to normal or even tripod mode.
[2019-03-11 18:36:31]
w4t3r :
Without GPS yes, but I think VPS needs compass
[2019-03-11 19:48:42]
teslahv :
Say it cannot purely optically notice what position error is increasing and which motors to make faster to correct for the micro error?
Anyone ever flew less than a meter across well structured iron or steel plates, or a container? Did the AC keep its position?
[2019-03-11 20:00:33]
w4t3r :
I have muscle-memorized to counteract drifting, so I can’t tell you. It shouldn’t go nuts (like yawing uncontrollably), that’s for sure.
I’d recommend to practise with a cheap shitty drone so you don’t need positioning systems when they fail
[2019-03-11 20:01:15]
lolo780 :
Both compasses out?
[2019-03-11 20:01:59]
lolo780 :
IMU will still work to counter movements, but can drift slowly
[2019-03-11 20:07:29]
bobdole :
what about when you're indoors and theres a metal structure nearby
[2019-03-11 20:07:59]
bobdole :
if you get within 2ft of that structure, it will go towards it.. we need that in the simulator
[2019-03-11 20:22:48]
validat0r :
mostly fighting against the wind, I guess?
[2019-03-11 20:46:19]
lolo780 :
One of my sparks tried to fly away last night. Testing in a big field.
[2019-03-11 21:05:56]
validat0r :
you didnt let it?
[2019-03-11 21:37:06]
lolo780 :
No, the lights are really bright without the covers. Can see it overhead at 1km.
[2019-03-11 21:38:10]
lolo780 :
I added the TX power mod to the 1860 sh file. Not sure if it made any difference.
[2019-03-11 22:09:56]
validat0r :
What kind of tx power mod?
[2019-03-11 22:10:23]
lolo780 :
Bird side mod
[2019-03-11 22:10:33]
lolo780 :
From sincoder
[2019-03-11 22:11:08]
validat0r :
some "iw .." cmd?
[2019-03-11 22:11:22]
lolo780 :
I think so
[2019-03-11 22:11:49]
validat0r :
what do you mean by "you think so"? .. didn't you look inside the .sh?
[2019-03-11 22:12:20]
lolo780 :
I just copied the add on text
[2019-03-11 22:12:32]
validat0r :
care to share?
[2019-03-11 22:12:39]
lolo780 :
Hang on
[2019-03-11 22:13:45]
lolo780 :
dji spark wifi transmit power mod
root spark first
add this
"
iw reg set US
sleep 10
iw phy phy0 set txpower limit 3500
"
to the bottom of /vendor/bin/check_1860_state.sh
reboot your spark
now your spark's max tx power limit go's to 35dbm better than FCC 's 27dbm ,actually it may be 30dbm due to hardware limit
this only affect to the drone , not RC ,so range will not change but the fpv video maybe better
[2019-03-11 22:14:19]
validat0r :
hmmkay
[2019-03-11 22:14:33]
lolo780 :
On mine the file was in system/bin
[2019-03-11 22:14:51]
validat0r :
it's the persistant root
[2019-03-11 22:15:09]
lolo780 :
Ah
[2019-03-11 22:15:29]
validat0r :
should be in verndor/bin
[2019-03-11 22:15:51]
validat0r :
the one in system/bin is protected by the system. if you alter it, it will be rolled back
[2019-03-11 22:16:06]
validat0r :
funny, eh?
[2019-03-11 22:16:37]
lolo780 :
Hm, didn't check
[2019-03-11 22:17:21]
lolo780 :
Don't forget to chmod +x the sh file
[2019-03-11 22:17:26]
lolo780 :
From sincoder
[2019-03-11 22:17:54]
lolo780 :
I didn't see a vendor/bin
[2019-03-11 22:18:15]
lolo780 :
1000 firmware with 0300 fc
[2019-03-11 22:18:15]
validat0r :
you have root without having vendor/bin?
[2019-03-11 22:18:35]
lolo780 :
Just used dumldore
[2019-03-11 22:18:52]
lolo780 :
I guess I should root it
[2019-03-11 22:18:53]
validat0r :
did jezzab change the spark root?
[2019-03-11 22:19:03]
lolo780 :
Dunno
[2019-03-11 22:19:35]
validat0r :
go root it :smile:
[2019-03-11 22:19:54]
lolo780 :
Yeah. Been a long time not flying these.
[2019-03-11 22:20:53]
validat0r :
well with having modded Mavic I/II in one's arsenal it's not clear what one would do with a little spark :wink:
[2019-03-11 22:21:41]
lolo780 :
At 249g I can legally fly anywhere here
[2019-03-11 22:21:48]
lolo780 :
No restrictions
[2019-03-11 22:22:12]
validat0r :
ah, i see ... your bare bone spark
[2019-03-11 22:22:20]
lolo780 :
And it has no occusync distance limit.
[2019-03-11 22:22:36]
validat0r :
you mean the 32km?
[2019-03-11 22:22:52]
lolo780 :
So if I can boost the bird side TX, it might have potential
[2019-03-11 22:22:54]
validat0r :
how would you get 32km out of a spark
[2019-03-11 22:23:11]
lolo780 :
Occusync limit is 17.9km from RC
[2019-03-11 22:23:48]
validat0r :
really
[2019-03-11 22:24:08]
lolo780 :
I think the spark record is over 25km on way
[2019-03-11 22:24:28]
lolo780 :
One way.
[2019-03-11 22:24:31]
validat0r :
25km? and coming back?
[2019-03-11 22:24:55]
lolo780 :
Two way is 15 or 16km x 2
[2019-03-11 22:25:09]
validat0r :
yeah, i contemplated a tailwind mission with top speed one way .. dont need RC connection for that one
[2019-03-11 22:25:49]
validat0r :
still not sure who of my buddies will be on the far side and catch my spark when batteries go empty
[2019-03-11 22:25:54]
lolo780 :
And hope it lands where you wanted?
[2019-03-11 22:26:00]
lolo780 :
Hahah
[2019-03-11 22:26:21]
lolo780 :
Problem is the 15m/s waypoint speed limit.
[2019-03-11 22:26:43]
validat0r :
well, you just need like a football field with nice lawn, plan your mission with like 2m height at the end, or even -10 to have it firmly near ground
[2019-03-11 22:26:50]
lolo780 :
My 24+ km M2 flight was avg 17m/s or so
[2019-03-11 22:26:52]
validat0r :
and then someone could just catch it
[2019-03-11 22:26:54]
lolo780 :
Stock battery
[2019-03-11 22:27:04]
validat0r :
we patched that out of the FC, the speed limit
[2019-03-11 22:27:14]
validat0r :
I go 20m/s with tailwind on missions
[2019-03-11 22:27:18]
lolo780 :
Oh
[2019-03-11 22:27:21]
validat0r :
distance, too
[2019-03-11 22:27:28]
lolo780 :
I will have to check that out
[2019-03-11 22:27:59]
validat0r :
you need patch in the FC and in the App, of course, to dial the speed to 20/25 m/s
[2019-03-11 22:28:54]
validat0r :
i don't think I have made a pull request against the deejayeyemod repo yet .. not sure .. no demand for that
[2019-03-11 22:29:05]
validat0r :
i might be wrong
[2019-03-11 22:31:01]
validat0r :
stock spark with sufficient tailwind might be 25-30 km
[2019-03-11 22:31:35]
validat0r :
would be epic fight for sure. but totally out of RC reception of course
[2019-03-11 22:31:59]
lolo780 :
Follow it.
[2019-03-11 22:32:45]
validat0r :
yeah, in a car .. sure .. so you'd need one more buddy to drive you :smile:
[2019-03-11 22:35:11]
validat0r :
sounds like a interesting enterprise
[2019-03-11 22:36:02]
lolo780 :
<https://flipboard.com/article/https%3A%2F%2Fdronedj.com%2F2019%2F01%2F14%2F22-miles-mavic-2-pro-florida%2F>
[2019-03-11 22:36:06]
lolo780 :
Like that
[2019-03-11 22:36:22]
validat0r :
404
[2019-03-11 22:36:51]
lolo780 :
<https://dronedj.com/guides/florida/>
[2019-03-11 22:37:58]
validat0r :
son of a gun, this Pablo
[2019-03-11 22:39:12]
validat0r :
"here is an awesome vid of a guy in a car operating a drone" .. "but remember kids: Don’t drone and drive!"
[2019-03-11 22:39:36]
lolo780 :
Use cruise control on RC plus waypoints.
[2019-03-11 22:39:53]
validat0r :
sure, that's the way to do it more safely
[2019-03-11 22:39:56]
lolo780 :
I've never tried my bt300s while driving. Hahah
[2019-03-11 22:40:21]
lolo780 :
Car nav screens should run go4
[2019-03-11 22:40:39]
lolo780 :
With sticks on the steering wheel
[2019-03-11 22:41:07]
validat0r :
maybe dont drive yourself .. just shout a the driver .. "I said, turn right, you fool. now i will lose my M2"
[2019-03-11 22:43:09]
validat0r :
soon i'll have my second shot at battery modding .. 240gr extra was too much. now let's have a look if 140gr are ok for little spark
[2019-03-11 22:43:38]
validat0r :
if it is i still can remove the light covers
[2019-03-11 22:49:07]
lolo780 :
Keith's was 415g I think
[2019-03-11 22:49:24]
lolo780 :
For a record flight
[2019-03-11 22:49:27]
validat0r :
stock is 320?
[2019-03-11 22:49:33]
lolo780 :
30x
[2019-03-11 22:49:47]
validat0r :
hmm, so 140 seems too much
[2019-03-11 22:49:49]
validat0r :
darn
[2019-03-11 22:53:41]
lolo780 :
Drop some weight
[2019-03-11 22:54:21]
validat0r :
top cover
[2019-03-13 02:48:54]
slack1208 :
Ok
[2019-03-16 22:13:52]
borillion_star :
stupid question, anyone know of a good guide on the DJI go app that has "recommended settings" or anything for the camera? I'm totally illiterate when it come to this part of the drone :stuck_out_tongue:
[2019-03-16 23:46:22]
fredmicrowave :
I depends a lot on what you intend to do with it. But i would recommend to check on Youtube, there are plenty of good videos on that subject.
[2019-03-17 00:51:49]
lolo780 :
And read up on basic photography. Set the drone up on the ground and practice with the camera under different lighting conditions. Get a feel for white balance and manually selecting shutter, aperture and ISO quickly.
[2019-03-17 01:16:19]
rickw001 :
anyone on running NLD 4.1.11 go ?
[2019-03-17 01:16:42]
rickw001 :
4.1.22,sorry
[2019-03-17 14:47:03]
quad808 :
Me
[2019-03-17 14:53:21]
rickw001 :
hey quad
[2019-03-17 14:55:35]
quad808 :
What's up?
[2019-03-17 14:57:43]
rickw001 :
I tried M5 last night,hit rth,it got about 500' from me and stopped then started climbing,I had to cancel rth to stop it around 350-400',rth was set at 45m,landed manually,any idea what happened?
[2019-03-17 14:59:52]
quad808 :
No errors? You manually brought it in? Wonder if GPS or altimeter malfunctioned
[2019-03-17 15:01:00]
quad808 :
I have found that 4.1.22 is solid.
[2019-03-17 15:01:44]
rickw001 :
yes,flew fine up until I hit rth,was about 1500' away when I did rth and it got about 500' from home when it happened,no errors shown
[2019-03-17 15:02:25]
quad808 :
What is M5?
[2019-03-17 15:02:48]
rickw001 :
our new tablet,lol
[2019-03-17 15:02:58]
quad808 :
Ahhhhh
[2019-03-17 15:03:24]
rickw001 :
it flew fine last week with mini 4
[2019-03-17 15:03:45]
quad808 :
I would chalk it up to a glitch, unless it happens again.
[2019-03-17 15:04:15]
rickw001 :
kk,d95gas suggested recalibrate everything
[2019-03-17 15:04:24]
quad808 :
We get spoiled by how good these fly overall
[2019-03-17 15:04:53]
quad808 :
I would do the compass at a minimum
[2019-03-17 15:04:55]
rickw001 :
exactly,never had a problem before
[2019-03-17 15:05:31]
quad808 :
How was the weather? Windy?
[2019-03-17 15:06:08]
rickw001 :
yes,forgot to mention,I did get camera shake warning
[2019-03-17 15:06:59]
quad808 :
I am wondering if the... Not altimeter, but can't remember what it's called, misread the air pressure
[2019-03-17 15:07:25]
rickw001 :
first time I ever got that warning
[2019-03-17 15:07:57]
rickw001 :
barometric pressure sensor?
[2019-03-17 15:08:22]
quad808 :
In an airport, catch you later
[2019-03-17 15:08:28]
rickw001 :
kk
[2019-03-17 16:14:53]
cantrepeat :
Could possibly thought some thing was in the flight path and was attempting to go over it.
[2019-03-17 16:29:04]
rickw001 :
everything was clear and in sight,like quad said,maybe a glitch
[2019-03-17 16:30:17]
rickw001 :
after I cancelled rth to stop climbing,I hit rth again and it started climbing again
[2019-03-17 17:56:24]
cantrepeat :
IMU and compass recal and try again tonight?
[2019-03-17 18:52:35]
rickw001 :
:+1:
[2019-03-18 05:07:22]
teslahv :
In the GO log does it say anything of "Obstacle avoided"?
[2019-03-18 05:07:41]
teslahv :
The warning log in that selection where "About" is too
[2019-03-18 09:29:12]
eitan1195 :
!wiki
[2019-03-18 18:53:41]
teslahv :
!dji
[2019-03-18 19:17:45]
teslahv :
@kilrah in a thread "<https://mavicpilots.com/threads/satellite-lte-control-mavic-pro-pro-platinum.32958/page-2>" you said one cannot fly over 4G with a Mavic.
I'd like to know what are the physical/technical limitations that one cannot. Maybe there are workarounds for the limitations?
Let aside flights such as with the Parrot are highly illegal.
[2019-03-18 19:20:15]
teslahv :
When it comes to latency e.g. one can just slow down the motions and speed, and fly in wide open areas where 0.5 s latency are acceptable.
[2019-03-19 16:55:07]
cs2000 :
Someone, possibly jcase, can’t remember, has done a 4g flight, the issue is one of latency, a video was shows with the RC inputs and the drone movements into the same shot.
[2019-03-19 16:55:22]
cs2000 :
No technical limitation stopping you from doing it though
[2019-03-19 17:52:21]
teslahv :
Ok ty!
[2019-03-19 21:03:08]
mdelsalto :
!wiki
[2019-03-19 22:07:13]
dkovar :
Mavic using 4G and a Raspberry Pi - <https://www.youtube.com/watch?v=NVGlmuDbsDk>
[2019-03-24 13:04:06]
kbgroning :
Some chase footage of the freestyle Spark <https://www.instagram.com/p/BvZETeEIOdj/?utm_source=ig_share_sheet&igshid=1heqya1kxtf6l>
[2019-03-24 13:05:29]
cantrepeat :
video is blank and music is bad.
[2019-03-24 13:06:12]
validat0r :
nah, works .. nice refitting of a spark body :wink:
[2019-03-24 13:06:28]
cantrepeat :
really nothing but black to me
[2019-03-24 13:06:57]
validat0r :
maybe some adblocker
[2019-03-24 13:07:09]
cantrepeat :
could be
[2019-03-24 13:07:35]
cantrepeat :
black in chrome but works in IE
[2019-03-24 13:08:46]
cantrepeat :
music still bad but pretty cool flying
[2019-03-24 13:09:49]
cantrepeat :
Is that just a park or has it been set up for drones. I notice the little hop gates.
[2019-03-24 16:07:12]
kbgroning :
It’s an old garbagedump, on top of it was a Holiday Park, and now it is bought to use for military purposes what we didn’t knew <http://a63.tinypic.com/k21cvq.jpg>
[2019-03-24 16:07:52]
kbgroning :
So this was the last time we were able to fly it
[2019-03-24 17:06:29]
kyokushin :
hello, i was not present for awhile. My v45 stopped to work with maps. I am just clicking an 'offline maps' and nothing is happening.
[2019-03-24 17:06:35]
kyokushin :
I am alone or that is some known issue?
[2019-03-24 17:06:42]
kyokushin :
(it worked half year ago)
[2019-03-24 17:11:06]
bin4ry :
its known
[2019-03-24 17:11:11]
bin4ry :
you need to create an own key
[2019-03-24 17:11:18]
bin4ry :
use the inbuild app cloner of the linux version
[2019-03-24 17:11:25]
bin4ry :
it will ask you to put in your own key
[2019-03-24 17:11:35]
bin4ry :
djis key expired
[2019-03-24 17:12:22]
cantrepeat :
also, @ilovemynexus4 added some new default keys to the github modder. May still be working, dunno for sure.
[2019-03-24 17:20:50]
kyokushin :
Ookay, so i have few quick lame key then:
1. how to generate a key
2. i saw .sh scripts where they wil ask for key. Should i use them before patching though the modder?
3. i am doing that form windows...
[2019-03-24 17:27:42]
validat0r :
here maps key I pushed should still work. if you want google maps, you have to jump through the hoops
[2019-03-24 17:27:56]
kyokushin :
no, only here
[2019-03-24 17:28:14]
kyokushin :
okay, i used latest sources, it seems to work, thank You for help
[2019-03-24 17:28:40]
kyokushin :
Could you describe how can i generate and change here key for future, if that will happen again?
[2019-03-24 17:34:05]
validat0r :
[here.com](http://here.com), create dev account, generate here maps dev key, put the generated key into the AndroidManifest.xml
[2019-03-24 17:34:23]
kyokushin :
Thank You :slightly_smiling_face:
[2019-03-24 21:25:31]
chipmangini :
@kyokushin This may help: <https://www.rcgroups.com/forums/showpost.php?p=39763062&postcount=5726>
[2019-03-24 22:00:24]
quad808 :
lies in that thread
[2019-03-24 22:00:56]
quad808 :
:exploding_head:
[2019-03-24 22:37:43]
chipmangini :
@quad808 LOL!
[2019-03-28 08:42:08]
007 :
Hello.
I try Several times to trick the cs with,
<https://dji.retroroms.info/howto/crystalsky>
But it's steel problem to install the modder 4.1.22 on my cs.
Someone has no idea why ?
My PC win 10.
Thanks
[2019-03-28 09:07:27]
xela75 :
Hi! Try to mod Dji go 4 with Linux OS
[2019-03-28 09:07:32]
xela75 :
instead of Win10
[2019-03-28 09:08:56]
007 :
The same way just with Linux ?
[2019-03-28 09:12:14]
xela75 :
Yes because for instance, Win10 version does not clone the "dji Go 4 name" and you must clone it to be able to install it on the CS
[2019-03-28 09:12:31]
xela75 :
Because of already DJI GO 4 installed bloatware...
[2019-03-28 09:13:37]
007 :
Excellent. Thank you very much.
[2019-03-28 09:14:33]
xela75 :
np
[2019-03-28 09:16:03]
xela75 :
I've been looking for a while too whereas that was so easy...
[2019-03-28 09:18:01]
007 :
Ok, I will find Linux to do it.
[2019-03-28 13:39:59]
bobdole :
in this case you see.. linux is finding you
[2019-03-28 13:40:00]
cantrepeat :
build an Oracle virtual box on your windows machine and install ubuntu 18.04 - you'll have everything you need
[2019-03-28 13:53:06]
007 :
Thanks
[2019-03-28 20:19:05]
cantrepeat :
@jcase In Mother Russia, Linux operates you!
[2019-03-28 20:20:35]
lolo780 :
Russian dash cams are the best in the world
[2019-03-28 20:28:03]
validat0r :
their brands, or the footage produces by russians?
[2019-03-28 20:28:18]
lolo780 :
Footage
[2019-03-29 12:45:53]
007 :
Hi.
I download Linux on my win 10, connect the cs saw him on the screen and try to run sh file on the terminal but without success ?
I even download the shell.
Someone can tell me what I'm doing wrong.
Thanks
[2019-03-29 16:12:24]
xela75 :
to do what ?
[2019-03-29 16:16:04]
007 :
To Install apk modder on rooting cs
[2019-03-30 00:55:00]
borillion_star :
So personal dilemma here, do I send in my drone for compass issues under warranty, then try to install an SD or open it up and twist the cables myself?
[2019-03-30 00:55:03]
borillion_star :
:confused:
[2019-03-30 01:30:29]
teslahv :
ATTI --> don't need compass any longer :)
[2019-03-30 05:20:21]
borillion_star :
I suck at flying lol
[2019-03-30 05:20:40]
borillion_star :
Not comfortable with that yet
[2019-03-30 10:21:07]
cantrepeat :
@borillion_star what model drone are you talking about?
[2019-03-30 10:58:12]
007 :
To Install apk modder on rooting cs ?
Thanks
[2019-03-30 18:55:15]
borillion_star :
Mavic 1 Pro
[2019-03-30 18:55:54]
borillion_star :
Its been my 6th flight or so
[2019-03-30 19:11:30]
borillion_star :
I'm wondering if this could be a mismatch between the controller and the drone, never flashed the controller
[2019-03-30 19:41:39]
cantrepeat :
you can flash the controller anytime
[2019-03-30 20:56:17]
borillion_star :
I do realize that
[2019-04-01 15:01:05]
samlevy1972 :
@quad808 You may want to change the NLD page to reflect that M2 support is "coming April" as March has passed. :wink:
[2019-04-02 19:32:21]
jakwnd :
Not sure if I'm in the right place, I'm trying to get root on my Mavic Pro, currently running V01.04.0100. I'm using using DUMLRacer, which says its successful, however I'm not seeing any devices in adb.
[2019-04-02 19:43:39]
cs2000 :
Racer is definitely compatible with that version. Do you have drivers installed properly?
[2019-04-02 19:44:29]
cs2000 :
Otherwise, try dumldore v3, it has an enable ADB button, it isn’t persistent, only lasts u TIL a reboot, but a good way to check if it’s racer or your PC that’s acting up
[2019-04-02 19:45:17]
jakwnd :
Im in Ubuntu,
[2019-04-02 19:45:36]
jakwnd :
ill run it in a windows 10 vm
[2019-04-02 19:46:41]
jakwnd :
pyduml didnt work either for me
[2019-04-02 20:02:19]
jakwnd :
just tried DUMLDore v3, says it worked but I'm still not seeing any adb devices.
[2019-04-02 20:05:46]
jakwnd :
if using ubuntu, you need to add the hardware device id to ~/.android/adb_usb.ini
[2019-04-02 20:05:56]
jakwnd :
aka my adb was not detecting
[2019-04-02 20:48:41]
teslahv :
It works now?
[2019-04-02 20:59:43]
bobdole :
java -jar DUMLRacer.jar AC and it wasn't seeing the drone?
[2019-04-02 20:59:55]
bobdole :
try running in root
[2019-04-02 21:00:34]
bobdole :
don't need windows vm for that
[2019-04-02 21:01:12]
bobdole :
and then... you should be able to restart it.. and adb shell right into it
[2019-04-03 18:34:18]
jakwnd :
Yes it all worked! was an issue with ubuntu and adb
[2019-04-06 18:05:17]
borillion_star :
Is it ok to leave the m1p switched on sitting on the table, it doesn't need to be moving to cool probably correct?
[2019-04-06 18:18:22]
quad808 :
point a fan underneath it. It slowly cooks
[2019-04-06 18:18:40]
quad808 :
just to be safe
[2019-04-06 18:35:04]
borillion_star :
I figured
[2019-04-06 18:35:25]
teslahv :
If internal fan works you should be fine for infinitely long.
I let it sit multiple hours when working with adb
[2019-04-06 18:35:41]
borillion_star :
Also someone said there is a way to set the the front compass as the default?
[2019-04-06 18:53:07]
borillion_star :
[2019-04-06 18:53:11]
borillion_star :
[2019-04-06 18:53:16]
borillion_star :
Wires are twisted
[2019-04-07 17:44:38]
digdat0 :
Is the compass value g_config_fdi_switch_compass_default_index ?
[2019-04-08 18:18:46]
jakwnd :
I'm not sure if it was DUMLRacer, DUMLDore, or pyDUML with the fireworks package, but my mavic pro ALWAYS has adb enabled now, even if I go up to V01.04.0400 and back down. lol, any idea what I did?
[2019-04-08 18:21:53]
quad808 :
DUMLracer probably
[2019-04-08 18:35:29]
jakwnd :
is there anything I can do to revert it?
[2019-04-08 18:40:15]
fredmicrowave :
Have you tried:
_adb shell_
_mount -o remount,rw /vendor_
_rm /vendor/bin/*_
_reboot_
[2019-04-08 18:44:42]
jakwnd :
Yes! that worked! thank you, So DUMLRacer probably modified some init script? and that script didnt get overwritten during any fw upgrades?
[2019-04-08 18:53:29]
validat0r :
nah, /vendor/bin should cover it
[2019-04-08 18:59:12]
jakwnd :
What is /vendor/bin?
[2019-04-08 19:09:19]
validat0r :
the presistant root script
[2019-04-08 19:09:30]
validat0r :
check_1860_state.sh
[2019-04-08 19:10:00]
validat0r :
afaik if this is gone, there shouldn't be no adb any more
[2019-04-09 21:18:35]
jakwnd :
is this (<http://dji.retroroms.info/faq/modulecookbook>) still the best info for firmware modules? has anyone figured anything else out? I'm interested in how they are updating the sdr on ocusync models, and want to identify which modules might contain those updates
[2019-04-10 14:51:57]
carlos3939forocoches :
would be someone so kind to tell me how to use the Spanish patch for firmware 4.1.22 would be so kind? is for the application of deejayeye-modder thank you very much
[2019-04-13 13:24:31]
jabuasab :
Anyone know about the AES-256 Encryption on the new Matrice V2? is that complete encryption of uplink and downlink?
[2019-04-15 16:16:11]
jakwnd :
Is there a trick to rooting a Mavic Pro RC? The device disappears after I use DUMLDore
[2019-04-15 16:28:13]
cantrepeat :
are you talking about the drone or the controller?
[2019-04-15 16:28:31]
cantrepeat :
and what version of DumlD are you using?
[2019-04-15 16:30:36]
cantrepeat :
you're probably better off rooting the MP1 with dumlracer or ubersploit.
[2019-04-15 16:33:27]
jakwnd :
The controller, Ive rooted the drone successfully
[2019-04-15 16:37:55]
cantrepeat :
I don't think you need to root the controller.
[2019-04-15 16:38:16]
cantrepeat :
what firmware do you have on your drone?
[2019-04-15 16:50:22]
jakwnd :
I dont have a good reason to your right, I was just curious and wanted to poke around, Im running v01.04.0100
[2019-04-15 16:54:30]
cantrepeat :
about the only thing you need to do is flash it with the firmware you have on your bird
[2019-04-15 16:54:45]
cantrepeat :
I'm not even sure there is a root for the controller
[2019-04-15 17:00:19]
jakwnd :
DUMLDore's wiki says the mavic controller is supported, Although I just realized I have a Mavic Pro
[2019-04-15 17:02:51]
cantrepeat :
no real difference between mavic, mavic pro and mavic pro platinum
[2019-04-15 17:04:45]
cantrepeat :
is it a mavic "2" pro?
[2019-04-15 17:10:47]
jakwnd :
no its technically the platinum
[2019-04-15 17:11:12]
jakwnd :
List of devices attached
???????????? no permissions
Thats what adb devices shows me
[2019-04-15 17:14:55]
jakwnd :
4th times the charm!
[2019-04-15 17:14:57]
jakwnd :
root@wm220_dz_rp0010_v1:/ #
[2019-04-16 05:04:48]
teslahv :
Yep controller works too
I've used dumlracer back in the times.
Maybe you will need controller root for SilencioRC alike mods...
[2019-04-17 16:55:01]
t3rm1 :
Can someone tell me if the forceboost modification (<https://dji.retroroms.info/howto/dji_configs#auto_apply_the_config_android_with_app>) is working with 01.04.0300 and latest DJI Go?
[2019-04-17 16:56:35]
t3rm1 :
on a Mavic Pro
[2019-04-17 18:50:29]
cs2000 :
No its not, you need older version. It even says it on the wiki page
[2019-04-17 19:18:27]
t3rm1 :
oh, you are right. is there another way how to get fcc with newer go versions?
[2019-04-17 19:36:51]
cs2000 :
no mate, sorry
[2019-04-17 21:36:46]
teslahv :
Mavic 1 and 01.04.0300?
[2019-04-17 21:37:13]
teslahv :
Ah Mavic Pro
[2019-04-17 21:38:34]
teslahv :
MPP and 01.04.0300 I used jkson fcc mod to get FCC independent from GO version.
[2019-04-18 20:55:39]
nicholas.enslow :
Anyone know how to remove alti limit on 1.04.0300?
[2019-04-18 20:57:38]
cantrepeat :
FC Patcher is your answer.
[2019-04-18 21:05:11]
nicholas.enslow :
Thanks
[2019-04-19 09:19:55]
t3rm1 :
@teslahv afaik the jkson fcc mod only switches the drone to fcc and not the remote. that would mean I would get good image transmission but no improved range. am i wrong?
[2019-04-19 11:25:14]
teslahv :
I thought the Mavic and remote will negotiate the transmission power.
This means the power will be at equal level on both.
[2019-04-19 13:22:13]
t3rm1 :
ok, i'll try it. do you know if it is possible to Enable ADB with dumldore on a Pro Platinum? When I click on the button the tool reports it is enabled but adb devices shows no device
[2019-04-19 13:22:27]
t3rm1 :
maybe it only works for the non platinum mavics
[2019-04-19 13:23:09]
lolo780 :
Platinum is the same core board.
[2019-04-19 13:28:10]
t3rm1 :
does that mean it should work? what can be the problem that adb doesn't show any devices?
[2019-04-19 13:29:54]
lolo780 :
Driver issue
[2019-04-19 13:40:58]
t3rm1 :
all i did is install assistant 1.1.2. if those drivers don't work, which do? ^^
[2019-04-19 13:44:09]
cantrepeat :
@t3rm1 dumldores adb is nice but I would suggest installing android debuging SDK.
[2019-04-19 13:44:46]
cantrepeat :
<https://developer.android.com/studio/releases/platform-tools>
[2019-04-19 13:45:17]
cantrepeat :
are you on win 10?
[2019-04-19 14:02:06]
t3rm1 :
win7
[2019-04-19 14:02:30]
t3rm1 :
i think dumldore just fails to enable adb
[2019-04-19 14:03:02]
cantrepeat :
that might be in part to the which USB driver you have.
[2019-04-19 14:03:06]
t3rm1 :
i just noticed as soon as i click on enable i hear the usb disconnect sound and i cannot access the sd card any more.
[2019-04-19 14:04:14]
t3rm1 :
and then i see DJI without driver in device manager. but only when i click on it in dumldore. before that everything looks fine and i can access sd card
[2019-04-19 14:04:35]
t3rm1 :
tried 3.1 and 3.2
[2019-04-19 14:06:58]
t3rm1 :
my phone shows up as soon as i plug it in
[2019-04-19 16:09:11]
teslahv :
Try from mac^^
[2019-04-19 17:53:12]
t3rm1 :
i dont have a mac :disappointed:
[2019-04-19 17:54:01]
t3rm1 :
I just flew outside and after 500 meters the video transmission had problems and I couldn't control the drone properly any more. I really need that FCC mod :smile:
[2019-04-19 17:54:36]
t3rm1 :
if anyone has an idea, I would be grateful to hear it
[2019-04-19 17:55:18]
lolo780 :
Boosted RC and antenna mod
[2019-04-19 17:55:31]
lolo780 :
The problem is the M1 is 2.4
[2019-04-19 17:56:01]
lolo780 :
Screenshot your signal graph
[2019-04-19 17:57:02]
lolo780 :
Why don't you boost it?
[2019-04-19 18:10:25]
t3rm1 :
the Enable ADB in DUMLdore doesn't work for me
[2019-04-19 18:10:41]
t3rm1 :
I want to install the jkson mod but that needs adb shell
[2019-04-19 18:11:25]
lolo780 :
Oh right.
Use dumlracer
[2019-04-19 18:12:00]
lolo780 :
Seems to work nicely on all but Inspire 2
[2019-04-19 18:14:48]
t3rm1 :
okay, i thought dumldore is the successor of it and that it uses the same method
[2019-04-19 18:15:29]
lolo780 :
Dumlracer leaves persistent root
[2019-04-19 18:15:59]
lolo780 :
Worth a try anyways.
[2019-04-19 18:34:55]
geeteshdubey :
Hello guys, elated to be a part of this group :smiley:. So we know mavic 2 detects obstacles and won’t get any closer than 2.5m, is there any param through nld app that can change that value? Thanks again :smiley:
[2019-04-19 18:36:12]
geeteshdubey :
I see a param called safe_dist = 1, the value doesn’t make sense :grimacing:
[2019-04-19 19:12:08]
t3rm1 :
cant use dumlracer. i'm on 01,04,0300. maybe someone else knows why dumldore doesn't work
[2019-04-19 19:34:56]
cantrepeat :
Um, dumlracer and ubersploit both eork on that fw version
[2019-04-19 21:21:29]
teslahv :
I was on 01.04.0300 and applied DUMLRacer. Worked like a charm :)
[2019-04-19 21:23:41]
teslahv :
Try 5 times and if it doesn't work use ubersploit
[2019-04-19 22:04:12]
t3rm1 :
this is how it looks after clicking on enable adb
[2019-04-19 22:08:16]
t3rm1 :
and
[2019-04-19 23:11:23]
teslahv :
Dann ist wahrscheinlich etwas kaputt.
[2019-04-19 23:11:40]
teslahv :
xD
[2019-04-19 23:11:55]
teslahv :
As said try with dumlracer
[2019-04-19 23:13:17]
teslahv :
And I reckon windows 10 not having these problems, do you have a win10 at hand?
[2019-04-20 07:12:55]
t3rm1 :
Unfortunately I don't.
[2019-04-20 10:34:48]
t3rm1 :
ok it finally worked. solution: after clicking on enable adb you hear the usb disconnect sound and the previously recognized DJI device in device manager no longer has a driver. you need to select that device and manually force and select the adb driver for it. after that is shows up for `adb devices`.
[2019-04-20 11:08:02]
teslahv :
^^
[2019-04-20 11:08:25]
teslahv :
Now what are u up to with M1 root?
[2019-04-20 11:08:28]
bin4ry :
fucking old windows version
[2019-04-20 11:08:45]
bin4ry :
but good you hav eit now
[2019-04-20 11:17:58]
cantrepeat :
Very strange, I've never had to do that when I was running win7 64
[2019-04-20 11:19:35]
cantrepeat :
Maybe take a look at - Or, to upgrade an existing Android USB driver on Windows 7 and higher with the new driver:
[2019-04-20 11:19:43]
cantrepeat :
<https://developer.android.com/studio/run/oem-usb>
[2019-04-20 11:21:39]
teslahv :
Running Flight Simulator with M1 controller I've had big problems on Win 7 whereas on Win 10 everything worked out of the box.
[2019-04-20 11:42:21]
t3rm1 :
@bin4ry Win7 is so much better than Win10. Can't state that too often :smile:
[2019-04-20 11:42:57]
t3rm1 :
@teslahv first of all just FCC mode. That's all I ever wanted. Had no problems with NFZ so far.
[2019-04-20 11:45:59]
bin4ry :
not true
[2019-04-20 11:46:03]
t3rm1 :
I'm still nervous of people asking strange questions before every flight. Haven't used the drone too much. Also, I'm not good at video editing
[2019-04-20 11:46:06]
bin4ry :
win10 is the first decent windows in my eyes
[2019-04-20 11:46:20]
bin4ry :
but lets settle that here
[2019-04-20 11:46:37]
bin4ry :
lets say you should use a proper OS and boot win10 if needed
[2019-04-20 11:46:42]
bin4ry :
and then boot back to a proper os
[2019-04-20 11:46:45]
t3rm1 :
Microsoft did such a bad job at quality assurance with all the past bigger updates for win10.
[2019-04-20 11:48:22]
cantrepeat :
I was very reluctant to switch over to win10 but after a year or so it's just normal day to day stuff again.
[2019-04-20 11:49:23]
bin4ry :
win10 handles all devices much better as win7, many parts are really good and security is top notch there, no reason to use win7. fuckups of updates ok, but that is no big deal, atleast my devices work all well. if you are not working in a enviroment where you need to get the device offline 100% then there is no real reason to stay away from win10 IMHO if you are a windows user
[2019-04-20 11:49:42]
t3rm1 :
I'm going to keep windows until the support runs out. then i will switch.
[2019-04-20 11:49:57]
bin4ry :
but i really didn't want to start that OS discussion. win7 is out of support now (or soon?!) anyway, so there is one less reason to use it
[2019-04-20 11:50:43]
t3rm1 :
the main reason why i dislike win10 is the ugly ui. so much white in the control panel, so much space between controls and you don't see wether you can scroll down or not.
[2019-04-20 11:51:07]
t3rm1 :
beginning next year it will be out of support
[2019-04-20 11:51:24]
bin4ry :
UI is UI is UI, some like it some not, you can configure it
[2019-04-20 11:51:24]
t3rm1 :
officially. but i'm 100% positive that this will change
[2019-04-20 11:53:00]
t3rm1 :
I had Win7 installed for 9 years without any problems and just had to reinstall lateley because a firewall uninstall tool deleted the system32 folder -_-
[2019-04-20 11:53:52]
bin4ry :
well would have been the perfect time to switch over -.- ^^
[2019-04-20 11:54:13]
t3rm1 :
true :smile:
[2019-04-20 11:54:42]
t3rm1 :
they are working on a new UI design. if i like that i might switch over sooner.
[2019-04-20 11:55:02]
bin4ry :
i dont get what people have with UI shit
[2019-04-20 11:55:27]
bin4ry :
there are more important things to a OS than UI, security f.e.
[2019-04-20 11:55:32]
bin4ry :
and performance
[2019-04-20 11:55:43]
bin4ry :
99% of the time i dont see the OS but any software i use
[2019-04-20 11:56:23]
cantrepeat :
yeah I didn't like the win 10 UI much either, but like anything else you use you do get used to it.
[2019-04-20 11:56:23]
bin4ry :
best UI is CLI anyway
[2019-04-20 11:56:31]
t3rm1 :
performance is better with win7. why do you think they needed to implement a "game mode". and that game mode made it even worse for some games ^^
[2019-04-20 11:56:47]
bin4ry :
performance is NOT better on win7
[2019-04-20 11:56:48]
bin4ry :
thats BS
[2019-04-20 11:56:58]
t3rm1 :
yes, i agree. it's all a matter of getting used to it. i will be okay with it eventually
[2019-04-20 11:57:17]
cantrepeat :
performance is not an issue with win10 unless you are running a x286 lol
[2019-04-20 11:57:35]
bin4ry :
or show me some proper nubmers to that :wink: if you have a decent pc it runs very smooth and uses the hardware much much better than win7
[2019-04-20 11:57:47]
bin4ry :
ok pizza us here i have to go
[2019-04-20 11:57:51]
bin4ry :
*is
[2019-04-20 11:57:59]
cantrepeat :
what kind of pizza
[2019-04-20 11:58:07]
cantrepeat :
that's a messed up!!!
[2019-04-20 11:58:24]
t3rm1 :
also, you guys dislike DJI because of the phone home stuff. win10 does that too, as win7. but on win10 it is much more and it is nearly impossible to switch it all off.
[2019-04-20 11:59:24]
cantrepeat :
you can turn it off
[2019-04-20 11:59:28]
t3rm1 :
the only proof i have are the numbers when they released the game mode. maybe it is fine now but back then it made things worse.
[2019-04-20 11:59:59]
cantrepeat :
well enough of this, it's your pc do what you like
[2019-04-20 12:00:12]
t3rm1 :
and they only made the game mode because performance for games was worse in general
[2019-04-20 12:00:26]
t3rm1 :
ye, its like a windows/linux discussion :smile:
[2019-04-20 12:00:54]
t3rm1 :
and some people even think OSX is good :smile:
[2019-04-20 12:01:07]
t3rm1 :
who scrolls upwards to go down?
[2019-04-20 12:57:23]
cantrepeat :
but, why does it burn when I pee?
[2019-04-20 13:05:43]
bin4ry :
ppl are used to touchscreens, when you get the perspective of dragging the side this scroll direction makes absolute sense.
[2019-04-20 13:05:56]
bin4ry :
i don't like it personally, but i can understand why some people like it
[2019-04-20 17:12:19]
jcarlo :
Is this like win xp all over again.
[2019-04-20 19:28:51]
fredmicrowave :
Win7 is like patched MP1 . Win10 is like MP2 locked forever :laughing:
[2019-04-20 19:31:34]
fredmicrowave :
(Just a joke. I don't really care. Don't like win10 but will get used to it eventually... In a few years, when i will have to use it buaha )
[2019-04-20 20:04:20]
quad808 :
People. Go to [ninite.com](http://ninite.com) and grab classic shell for Win 10, then go get shutup10 and thank me later. We put both programs on all PC's at work, 300+. All the win7 babies who complain about "tiles" in win 10 are now at one with win10. Your welcome.
[2019-04-20 20:16:54]
nocommie :
Oh yeah, Classic Shell is the only way I can tolerate Win10.
[2019-04-20 20:24:03]
teslahv :
Guys cmon.
[2019-04-20 20:51:29]
cantrepeat :
Having a conversation with a brunette is the only way I can tolerate a blond!! :smile:
[2019-04-21 14:58:11]
w4t3r :
I‘m using macOS, I don‘t understand your problems. BTW, you can switch scroll direction in system preferences->mouse (or touchpad)
[2019-04-21 17:48:40]
cantrepeat :
@w4t3r stop posting logic in here!! :smile:
[2019-04-21 18:19:51]
w4t3r :
Lol
[2019-04-21 20:16:04]
t3rm1 :
I tested the jkson fcc mod today. sadly it doesn't work. the 1km line is slightly above the 90 db marker. so it should be fcc mode but drone reports bad signal when 500 meters away. that's the same distance i get with stock CE mode.
[2019-04-21 20:16:40]
t3rm1 :
does it matter if i turn on remote or aircraft first?
[2019-04-21 21:37:26]
quad808 :
That is an unreliable test method for FCC mode.
[2019-04-22 11:33:20]
t3rm1 :
well, I took it as an indication. the readme of the mod says that's the way to check if fcc mode is on. however the real test showed that it did not improve the range so I think im still in CE mode.
[2019-04-22 16:31:32]
flymymavic :
@t3rm1 range will vary with where you fly and weather, I can say with certainty that the jkson mod worked for me, I ran out of battery before I lost signal, try enabling the boost mode and changing to 2.3ghz
[2019-04-22 17:20:35]
quad808 :
On your on the phone/tablet you have been flying with. there is a log file (.txt file) located in
"/DJI/dji.go.v4 or v5/LOG/CACHE/areacode"
(or similar) on your device.
Look for a line that says: "E: init not ru ac=US" This is usually the very first line.
[2019-04-22 17:21:07]
quad808 :
In the log file you can clearly see if your country is set to US. That means it is in FCC mode.
[2019-04-22 20:03:27]
t3rm1 :
that file is encoded. looks like base64
[2019-04-22 20:06:15]
t3rm1 :
@flymymavic i know that the area and surrounds have a lot of impact. i already flew at this place and the max distance was about the same. weather was sunny on both days. i'm going to test in other areas too.
[2019-04-22 20:10:45]
t3rm1 :
@quad808 it's not base64. do you know how to decode these?
[2019-04-22 20:13:00]
quad808 :
post it here
[2019-04-22 20:17:21]
t3rm1 :
does it contain my gps location?
[2019-04-22 20:26:51]
quad808 :
I don't think so. Post it here and then delete it.
[2019-04-24 17:22:52]
teslahv :
Lol
[2019-04-25 20:04:57]
teslahv :
Does M2 really have a 15 ft limit in ATTI??
[2019-04-25 20:24:53]
lolo780 :
<https://i.imgur.com/jB5yu2t.jpg>
[2019-04-25 20:25:12]
lolo780 :
There may be a 4 missing
[2019-04-26 05:35:06]
teslahv :
Ok ty
[2019-04-26 14:02:44]
samlevy1972 :
@lowellfoo780 Did I see that right? You're going 83 mph?
[2019-04-26 14:03:00]
samlevy1972 :
Ho.Lee.Fuk.
[2019-04-26 14:11:20]
lolo780 :
Yes
[2019-04-26 14:12:17]
samlevy1972 :
Atti on the M2P? No Max motor speed?
[2019-04-26 15:27:55]
t3rm1 :
how can you fly so fast :open_mouth:
[2019-04-26 15:33:55]
validat0r :
in atti mode the AC is pretty agile .. if you dare to go full speed and not crash, you might reach these kind of velocities
[2019-04-26 15:35:20]
t3rm1 :
does it maintain height in atti mode?
[2019-04-26 15:35:52]
validat0r :
that's the definition of atti mode ..
[2019-04-26 15:36:03]
t3rm1 :
i don't know the definition :slightly_smiling_face:
[2019-04-26 15:36:05]
validat0r :
but it drifts with the wind, of course
[2019-04-26 15:36:38]
t3rm1 :
but if i think about it atti might stand for attitude. lol
[2019-04-26 15:37:12]
validat0r :
plus it doesnt RTH when out of RC range afaik
[2019-04-26 15:39:19]
t3rm1 :
I'm not sure about that. If signal is lost from remote for some time it could (given enough satellites) switch to gps mode
[2019-04-26 15:51:04]
t3rm1 :
@quad808 with some help of a member I was able to look into the log file in the areacode folder. are you absolutely sure that the jkson fcc mod changes the areacode? for me it looks like it changes the mode directly and does not change the location.
[2019-04-26 15:52:28]
t3rm1 :
i think only the patch for the old go versions change the countrycode.
[2019-04-26 15:56:13]
bin4ry :
depends on the drone actually
[2019-04-26 15:56:20]
bin4ry :
there are 2 options to set it to fcc
[2019-04-26 15:56:54]
bin4ry :
one is through the areacode (used that on the go patcher) other is through setting it to the power level
[2019-04-26 15:57:05]
bin4ry :
which drone are we speaking here?
[2019-04-26 15:58:54]
bin4ry :
doesn’t matter just checked jksons repo, he sets it via „powerlevel“ not region
[2019-04-26 16:13:16]
teslahv :
It usually is added to jcase check_1860_state.sh
[2019-04-26 16:14:28]
t3rm1 :
its MPP. I asked because quad808 told me to look into that log file after I said that I use the jkson method.
[2019-04-26 16:16:00]
t3rm1 :
the 1km line is above the 90db line but he said that this is unreliable and doesn't neccessarily mean it is in FCC mode
[2019-04-26 16:19:00]
teslahv :
Oh I remember, yeah.
[2019-04-26 20:40:17]
andrwho25 :
with NLD on MP2, is NFZ only on .0100? ie if you upgrade, is NFZ still there?
[2019-04-26 20:41:06]
lolo780 :
If you upgrade, I think the NFZ database will be refreshed with the new firmware package.
[2019-04-26 20:54:15]
andrwho25 :
ah. are there any noticeable drawbacks between latest and 100?
[2019-04-26 21:12:11]
lolo780 :
Check the feature list. I use litchi or dji pilot for waypoints.
[2019-04-26 21:12:38]
lolo780 :
I'd like to try the dual RC, but wouldn't miss it.
[2019-04-26 21:16:10]
rames.d :
Aircraft locked - need update
[2019-04-26 21:16:17]
rames.d :
How to unlock?
[2019-04-26 21:19:02]
rames.d :
Without fw update
[2019-04-27 08:40:07]
teslahv :
What is the ideal velocity for rth again?
[2019-04-27 08:40:41]
teslahv :
(Why didn't DJI choose that velocity)
[2019-04-27 08:41:17]
teslahv :
MPP before you ask
[2019-04-27 09:20:27]
lolo780 :
13-14m/s airspeed
The reason they didn't is to allow for wind.
[2019-04-27 09:22:00]
lolo780 :
DJI should have a power mode where you control avg motor PWM %.
[2019-04-27 09:23:27]
teslahv :
So they go slower? And it isn't recommended to change it then?
[2019-04-27 09:26:58]
teslahv :
As you seem very knowledgeable, can you set the minimum motor speed below 3000 rpm in flight?
I feel it cannot sink faster in non-manual because there's thrust of 3000 rpm propellers yet.
[2019-04-27 09:30:31]
teslahv :
Faster than 10 m/s
[2019-04-27 11:46:33]
validat0r :
hard problem .. maybe in manual mode.
[2019-04-27 11:47:39]
validat0r :
and it's not clear it has sth to do with rpm .. with extra weight the rpm is higher at -10 m/s
[2019-04-27 19:46:25]
teslahv :
Ok nuff said
[2019-05-01 16:40:45]
teslahv :
Just enjoying some nostalgy.
What "other" forum was that?
[2019-05-01 16:55:06]
teslahv :
Did he find Manual mode?
[2019-05-01 16:55:14]
teslahv :
^^
[2019-05-01 16:58:49]
teslahv :
Lol the "other" forum could've well been !DJI forum.
[2019-05-02 07:35:04]
kilrah :
was multicopterpilots or something like that.... mavicpilots used to delete topics/ban people talking about mods
[2019-05-02 16:05:51]
mohou :
[dji.retroroms.info](http://dji.retroroms.info) down?
[2019-05-02 16:19:17]
cantrepeat :
up for me right now, east side USA
[2019-05-02 16:25:46]
pross :
timing out here in rip-off britain
[2019-05-02 16:59:41]
teslahv :
Ah ok I saw that one. Ty!
[2019-05-02 18:06:07]
webmaster :
timing out in germany, too :grimacing:
[2019-05-02 18:49:13]
kilrah :
works now, but didn't earlier
[2019-05-02 18:49:17]
kilrah :
very flaky
[2019-05-02 18:49:22]
kilrah :
methinks something needs a reboot
[2019-05-02 19:33:21]
chipmangini :
Down East Coast US
[2019-05-03 03:10:48]
papareproductora :
You need to append https:// ! Some times doesn't work if you dont.
[2019-05-03 04:18:07]
teslahv :
Yeah I also found that to work but I wasn't certain it was about the https.
[2019-05-03 07:50:19]
cs2000 :
and sometimes it goes nuts with IP blocking :wink:
[2019-05-04 19:18:12]
teslahv :
To all fpv rate mode flyers out there: what is it called if you're (across a tall building wall) rocketing up into the sky?
It's an interesting move because the quad seems to take momentum with it to smoothly shoot up with the camera view pointing straight up.
At first I did not know quadcopters can also take momentum with them.
[2019-05-04 19:18:38]
teslahv :
I knew it was possible with fixed wing.
[2019-05-04 19:45:26]
kilrah :
a lot of it comes from the crazy camera angles
[2019-05-04 19:46:25]
kilrah :
some guys just put the camera 45° up or more, so when you look "up" the quad is pointing "up" a lot
[2019-05-04 19:46:35]
kilrah :
but yeah you can gain momentum.
[2019-05-04 19:48:45]
kilrah :
some are absolute masters at playing with stored energy
[2019-05-04 19:56:06]
teslahv :
Ok yeah found they call it hang time. Looks absolutely crazy.
[2019-05-04 22:32:01]
kilrah :
<https://www.youtube.com/watch?v=teKY-bxuSIY>
[2019-05-04 22:34:49]
kilrah :
you can watch dzozens of his videos and hear how so many times in his moves the motors are actually at idle...
[2019-05-04 22:35:42]
kilrah :
<https://www.youtube.com/watch?v=s49jeVgtb9w>
[2019-05-04 22:37:42]
kilrah :
and the precicion <https://www.youtube.com/watch?v=oo_a9yUFgqM>
[2019-05-05 06:32:51]
teslahv :
Thank you :)
[2019-05-05 06:34:13]
teslahv :
And yep I noticed them all but cutting the motors every so often :grinning:
[2019-05-05 07:00:26]
teslahv :
How? Talented + 10 yrs experience?
Amazing skills he has!
[2019-05-05 07:01:52]
teslahv :
<https://youtu.be/zl0fyTejZ_M>
That one tosses the quad also a lot
[2019-05-05 20:38:49]
paeton :
Is there anyone here with experience in unpacking VMProtect? And/or do we even know which packer DJI used on Assistant 2 v1.2.5?
[2019-05-05 21:36:16]
teslahv :
Lol DJI is using VMProtect?
[2019-05-05 21:39:56]
paeton :
For me, it looks like, but I'm far from expert. I just analysed the `DJI Assistant 2\Assistant\Root.exe` and it seems like VMProtect'ed with heavy anti-debugging features
[2019-05-05 21:41:26]
lolo780 :
Is that good or bad?
[2019-05-05 21:42:03]
paeton :
This is part of their efforts to protect latest Assistant apps from being switched to "debug mode"
[2019-05-05 21:45:24]
paeton :
For someone who tries to reverse it? Bad. Unpacking VMP is quite hard if you don't have much experience in that field (and I don't)
[2019-05-05 21:46:13]
lolo780 :
I thought debug mode had been done already
[2019-05-05 21:46:37]
lolo780 :
Problem is it can't change protected parameters so not useful
[2019-05-06 18:17:57]
kilrah :
Not 10 years cause he's only like 20 now... but yeah talent + young + lots of practice... basically was doing that all day every day for a couple of years I believe
[2019-05-08 18:27:00]
irischnpak :
!apk
[2019-05-10 18:24:50]
bobdole :
Is offline activation possible with the mavic 2 Pro?
[2019-05-11 21:52:46]
pellegrinoe2 :
Hi! Can anyone help with NLD? I have a DJI Spark, latest firmware (01.00.1000), downloaded and purchased the latest NLD client, activated my drone, but I can't get the NFZ patch work. When I click "Apply NFZ patch" button, it seems like the patch runs without any problem, it says "patching complete, device will reboot", it reboots, but NFZ-s are still there, even NLD client sees them, because at the "Remove NFZ" window it still shows the apply button active, and the remove button grayed out. Basically this is the only thing I bought it for. I tried re-applying, without any success (says complete, but does nothing). I even re-flash-ed my firmware, still the same.
[2019-05-11 22:09:37]
quad808 :
What is your Fly safe database version in GO after applying the patch?
[2019-05-11 22:10:46]
quad808 :
it should be
01.00.13.37 after applying the Remove NFZ patch
[2019-05-11 22:16:51]
pellegrinoe2 :
Precise Fly Safe Database (for Aircraft): 01.00.01.08
Precise Fly Safe Database (for App): 01.00.01.14
Basic Fly Safe Database: 01.00.01.08
[2019-05-11 22:21:11]
pellegrinoe2 :
Looks like NLD does nothing on my drone. After patching, when Spark does the soft-reboot, and connects again to NLD, I only have the option to apply the patch, and not to remove, so even NLD can't see that NFZ is patched. (If it counts: during the patching progress I have my RC and GO disconnected and turned off)
[2019-05-12 03:44:14]
quad808 :
try downgrading to 01.00.0900 and try it again
[2019-05-12 03:44:36]
quad808 :
did you do any ADB prior to this and mess up your Spark??
[2019-05-12 09:58:53]
pellegrinoe2 :
Downgraded with lots of hope, but still the same on 0900. I tried changing parameters, and that worked, so it looks like NLD has connection to my drone but for some reason, can't apply the NFZ patch correctly. I haven't used any other tool on my drone previously (except of course Assistant). I wrote an email to NLD for a money back, as it looks like it won't work on my drone :disappointed:
[2019-05-12 18:29:20]
flymymavic :
Nldz shows the patch as applicable even once done on my Mavic Pro
[2019-05-12 23:21:30]
jabuasab :
does anyone know if the new AES encryption does the whole uplink and downlink including the droneid?
[2019-05-13 11:23:29]
peteair :
I would be surprised that the droneid is encrypted because it woud mean that the aeroscope need the keys
[2019-05-13 19:16:17]
zwontzov.da :
@pierreduf But aeroscope can use master key that is the same for all drones (I mean droneid encryption)
[2019-05-14 06:34:28]
peteair :
so a key only for droneid and one for the "legacy" DL and UL transmission ? yes, that's right
[2019-05-18 18:29:45]
teslahv :
@jcase What is the advantage of DUMLFlasher over pyduml?
[2019-05-19 02:02:22]
abrahamsanchez89 :
Hi everyone, I'm very new with drones, I have a Spark and I used with the RC but today I have updated the firmware from the RC and now I can not fly because the GEO Zones, how can I downgrade the firmware of the RC? I am right now in the 01.00.0400 and what to go back 01.00.0300...
[2019-05-19 15:52:17]
validat0r :
I don't think there's nfz in the spark RC
[2019-05-19 17:55:02]
lolo780 :
Fly on wifi or gesture to find out
[2019-05-20 15:36:26]
teslahv :
Folks: What can you recommend?:
Brushless Micro FPV, max. 100 mm, 5 min flight time, 1-2s, BNF FrSky, (if possible adjustable camera), BlHeli Dshot ESC 6+ A, around $150, Angle mode + rate mode.
I saw the Beta75X and Beta85X but they are 2s. Can I fly with 1s?
A relative of mine saw the Happymodel Mobula7.
But it has not that good flight time...
[2019-05-20 15:38:24]
cs2000 :
perhaps id reccomend not spamming in every channel...
[2019-05-20 15:39:42]
teslahv :
I saw sometimes people posting things in different channels so I thought if it's not always I should be fine.
[2019-05-20 15:40:01]
cs2000 :
I guess, maybe, i dunno, i find it annoying personally :joy:
[2019-05-20 15:40:32]
teslahv :
Ok I can delete it if you want me to.
[2019-05-20 15:40:50]
cs2000 :
lol dont worry
[2019-05-24 17:32:09]
dgrauwickel :
Are the NLD forums history?
[2019-05-24 18:24:43]
quad808 :
No, down for mantinence from Russian women and Chinese spy bots
[2019-05-24 19:09:36]
dgrauwickel :
THANKS FOR THE INFO!
[2019-05-24 20:01:31]
constant.sin :
Hey guys, sorry if this is a dumb question but for NLD do you need to also patch the android apk? or just flash the drone
[2019-05-24 20:48:14]
mel69hash :
I'd like to know too for M2P
[2019-05-24 20:56:44]
constant.sin :
i got this answer: Not necessary to flash RC....it can be on higher firmware than the bird, except in the case of the goggles and head tracking.
[2019-05-24 20:59:01]
constant.sin :
So I guess the APK doesnt need patching and also Controller firmware can be higher than the Aircraft
[2019-05-25 14:56:32]
jon00182 :
Has anyone encounter inspire 2 firmware 01.02.0400?
[2019-05-25 14:57:19]
jon00182 :
Just bought one inspire 2 and the firmware is brand new. Even with assistant 2 v1.2.5 can’t downgrade to any lower version
[2019-05-25 14:57:56]
jon00182 :
[2019-05-25 15:16:12]
rickw001 :
have you tried downgrade with NLD ?
[2019-05-26 05:11:02]
jon00182 :
I don’t think it is supported
[2019-05-26 05:11:49]
jon00182 :
Because even when using the old method you still got to use the assistant to downgrade from 300 to 200 version
[2019-05-26 05:12:34]
jon00182 :
But out of no where they just came out with a brand new 400 version of the firmware. It is not even mentioned on their website release notice
[2019-05-28 11:56:06]
elintnl :
there is a NLD channel for your questions
[2019-06-05 23:28:16]
austin :
Does anyone have any experience downloading flight logs from DJI with account credentials? I haven't seen any url's online or in my searches of the decompiled APK. Assistant 2 doesn't support log sync right?
[2019-06-06 01:20:33]
jamie.ivanov :
@austin DJI does have an API where you can download data (after syncing the flight logs) which is what airdata uses but it depends on what you're looking for.
[2019-06-06 16:25:53]
austin :
@jamie.ivanov Yeah Airdata like functionality is what I'm looking for. Do you have any more information on this API?
[2019-06-06 16:29:19]
austin :
Specifically I'm looking to view logs that have been uploaded by the Go app
[2019-06-06 17:08:29]
quad808 :
@jon00182 NLD will downgrade that. Confirmed.
[2019-06-06 17:49:47]
originaldobo007 :
@quad808 will NLD run on a Windows 7 machine?
[2019-06-06 18:23:25]
quad808 :
yep
[2019-06-08 20:03:52]
teslahv :
Anyone here good at Betaflight?
I can't seem to find a pointer to comprehensive list about beep codes. I'm not talking about ESC codes.
[2019-06-08 20:18:49]
kbgroning :
Here are some <https://github.com/betaflight/betaflight/wiki/Arming-Sequence-&-Safety>
[2019-06-08 20:33:48]
teslahv :
Already found that page, but isn't this related to arming only?
[2019-06-08 21:44:59]
kbgroning :
Scroll doen, theres a whole list with beepcodes
[2019-06-09 09:22:38]
teslahv :
Yep, just saw them.
It is more comprehensive than I tought.
[2019-06-11 21:24:55]
cypresskb :
I'm rooted, but unable to patch 4.1.22 noseceo. Is this tutorial still good for patching GO4 for CS? <http://dji.retroroms.info/howto/android_patched_dji_go4>
[2019-06-11 21:26:19]
cypresskb :
"Missing apktool" error using deejayeye-modder
[2019-06-11 21:46:05]
nocommie :
It should be but havent patched the CS version. The apk tool error means you don't have everything downloaded or in the right place.
[2019-06-11 21:59:15]
cypresskb :
found apktool.jar separately and put it in tools folder but now: Could not find 'tools\bspatch.exe' error
[2019-06-12 01:22:30]
quad808 :
read @cypresskb <https://www.rcgroups.com/forums/showthread.php?2916078-DJI-Dashboard-How-To-tips-and-tricks-%2AMAVIC%2A>
[2019-06-12 05:55:02]
webmaster :
<https://twitter.com/HNRK2/status/1137689622396493824>
[2019-06-13 18:37:43]
cypresskb :
ty @quad808 I did and it downloaded folder/files but not everything i guess. Ended up going NLD for patching. Now trying to delete stock GO4 app + files on CS now before installing patched GO4 apk. Any ideas?
[2019-06-13 18:46:34]
quad808 :
You will need to root the CS.
[2019-06-13 19:11:48]
nocommie :
I suggest you do not try to delete the stock apps. It can cause issues
[2019-06-13 19:12:06]
nocommie :
just install NLD app
[2019-06-13 19:18:47]
cypresskb :
ty @quad808 @nocommie My CS is rooted via SuperSU with deviceID registered to Google. Have Playstore access. Force stopped and disabled stock DJI GO4 app in CS settings/apps menu. I should sideload NLD patched GO4 apk and turn off wifi for login?
[2019-06-13 19:47:22]
nocommie :
Correct
[2019-06-13 19:47:33]
nocommie :
Just need WiFi off for first login
[2019-06-13 20:02:29]
cypresskb :
:+1: Last one re maps. For proper working GPS maps and offline maps, is it necessary I follow the HERE maps registration steps 4 onward of this <https://dji.retroroms.info/howto/android_patched_dji_go4>
[2019-06-13 20:06:07]
nocommie :
Wait for quad to respond to that one.
[2019-06-13 20:08:00]
quad808 :
If you used NLD to patch 4.1.22, you are good to go
[2019-06-13 20:08:28]
quad808 :
that has been done already...google keys and Here keys
[2019-06-13 21:29:54]
cypresskb :
much appreciated @quad808
[2019-06-16 21:27:35]
papareproductora :
Hi everyone. How are you ?
[2019-06-16 21:28:42]
papareproductora :
Sorry I been so many time out. Here you should have 3 works to live :smile: . I just hadn't time.
[2019-06-16 21:30:40]
papareproductora :
Last month my mavic crashed in a work, and the gimbal stopped working. I disassembled it and found out that the black flex cable was broken, but everything else looked good so I've replaced it with a new one. But, its acting strange and not giving video signal. Does anyone want to give me a hand here?
[2019-06-16 21:31:52]
papareproductora :
Im uploading a video to illustrate what's going on
[2019-06-16 21:47:51]
papareproductora :
Alright, here it is <https://photos.app.goo.gl/PCHThXXFpCDj9evx8> I will appreciate any help. Even if it is a very bad news like "hey, you screwed your whole gimbal, just replace it"
[2019-06-17 04:16:38]
decrissionusa :
Hi everyone I'm Jacob.
I just bought the DJI Spark..
i tried to flight my drone when i was in Bali.
but the video resolution is not even 1080p and the flight height just 500m.
please help for step by step to hack my spark for 4K video & flight height altitude also is more good if i can open the all features.
many thanks :slightly_smiling_face: :pray: :pray:
[2019-06-18 22:02:35]
papareproductora :
Hello @decrissionusa do you know that it involves loosing your warranty and increased risk of losing your drone due to a strong wind or not enough battery to land? If you are still interested let me know and will see if I can help.
Anyway, the first option always if you don't have the know how is no limit dronez ([nolimitdronez.com](http://nolimitdronez.com))
[2019-06-20 14:05:06]
adam :
I have ancient firmware on my Mavic Pro (it was out of date when I bought it in 9/2017) that I have resisted upgrading because DJI seemed to break as much as they fixed. I finally have the time to learn about custom FW builds and figure out what is best for me. Ideally I'd like to have as many of the fixes and upgrades as possible with none of the shitty nanny stuff. I had one incident where it was impossible for me to launch due to proximity to an airport (I had clearance from the ATC), and I don't want to deal with that ever again. Overall, my mavic works pretty well, though I think there have been many improvements to the camera firmware that I don't have, and I'd like to remedy that (I have an AEB bug where the first two images are the same exposure). My primary use is photography, and I have no desire to remove any limiters other than allowing me to launch wherever I want.
Where is the best place to start reading up on my options?
[2019-06-20 14:10:00]
rickw001 :
get NLD,upgrade to 700 fw,and remove NFZ
[2019-06-20 14:18:03]
adam :
By 700, I assume you mean V01.03.0700 since it has the most features possible with NLD?
[2019-06-20 14:24:08]
adam :
I just checked and I'm still on the stock V01.03.0400. I'm a little confused by how the NLD birdmap works.
Does it tell you what you can do with a given stock firmware, or are those limitations true for all scenarios?
In other words, is it possible to upgrade to the latest (modded) firmware with all features of NLD provided that my stock firmware is low enough, or if I go to V01.04.0500 modded will I lose the ability to do NFZ and Altitude removal?
[2019-06-20 14:41:23]
rickw001 :
if you go to newer fw you lose a lot of features,go to [nolimitdronez.com](http://nolimitdronez.com) and look at bird map,shows you what you can and can't do
[2019-06-20 14:44:28]
rickw001 :
do not go to nwer 500
[2019-06-20 15:55:49]
rickw001 :
newer
[2019-06-21 17:31:50]
teslahv :
Can we have anonymous Steam account which is bound to prepaid credit card?
So we can buy Liftoff sim anonymously.
[2019-06-21 17:43:10]
pross :
Why you need it anon? its only 15 bones
[2019-06-21 18:12:43]
teslahv :
Don't want to give my valid address to Steam.
[2019-06-21 18:13:21]
teslahv :
After all it is the Interwebz, there.
[2019-06-21 18:18:57]
pross :
Send me the 15 quid and i’ll gift it to your account
[2019-06-21 19:22:40]
nocommie :
lol
[2019-06-21 19:22:59]
nocommie :
is steam the new DJI?
[2019-06-21 22:03:39]
teslahv :
Ok I will need to charge my credit card and create a Steam acc.
[2019-06-21 22:19:17]
teslahv :
Ok I might not getting Liftoff at all.
I remembered watching Zoe FPV's video about Liftoff and it looked terribly laggy. And I don't have a decent machine.
FreeRider is perfect with respect to that, it just worked out of the box with my Mid 2012 Mac.
[2019-06-24 05:28:44]
zapf :
DRL sim is pretty good. Liftoff works well on my machine, old i5 2500k and nvidia 1050. DRL less so, but still a better platform overall.
[2019-06-24 05:50:06]
decrissionusa :
Yes i was read it also about the loosing warranty and not enough battery but about the strong wind or lose singal (how about the RTH system?is it not working on the hack firmware or what?)
and actually i still interested about this hack firmware.
About the NLD i was see it also..but i used mac i cant download it.correct me if i'm wrong, their charge some money also for download
[2019-06-24 11:45:26]
papareproductora :
There is no tutorial on hacking a mavic, other than community based ones. But, in fact you need to have some basic skills on linux, android and a windows machine to do some of the basic tasks. See the !wiki if you need a starting point.
[2019-06-24 11:47:47]
papareproductora :
Hey I have drl simulator and its pretty good! And works on my laptop, doesn't have video card and renders at about 35fps.
[2019-06-24 16:48:20]
teslahv :
I nonetheless downloaded Liftoff and I don't seem to understand how I can get rid off the warning "Outside designated area" or such.
[2019-06-24 16:50:19]
teslahv :
I need large spaces to learn how to control the faster ones and there aren't visible boundaries on the maps. So how the heck am I supposed to know where the boundaries are?
[2019-06-24 16:51:04]
teslahv :
And to react in time if the warning appears.
[2019-06-24 17:36:54]
flydji :
take the golf course ;-)
[2019-06-25 14:12:26]
teslahv :
Ok will have a look.
I will also have someone physically observe me moving the sticks and tell me what I'm doing bad. I have an Idea who could that be.
I cannot seem to get those race turns and lost a virtual 2000 bucks yesterday in the pine woods by crashing every 20 s.
And right/left ctl is different in smoothness, my error that is, too.
And if attempting to finish the turn I start drifting severely in the other direction. :question:
Amazingly bad.
[2019-06-25 14:14:19]
teslahv :
Lag doesn't seem to be a problem for me though.
Very smooth everything.
[2019-06-25 14:22:31]
teslahv :
Quad thrust to weight was 10, so slightly edgier than my Mobula7.
[2019-06-25 19:21:18]
kyokushin :
hello, can you enter the [dji.retroroms.info](http://dji.retroroms.info)? I have an issues with getting that page. homepage is working but i cannot get faq and other subpages, i tried from different browsers and different network/devices.
[2019-06-25 19:22:10]
kyokushin :
Basically i am switched from android to iOS and looking how to use FCC enabled app for spark
[2019-06-25 20:54:06]
teslahv :
Once you needed to put an https:// in front of it, and possibly in front of the linked pages too.
Maybe this solves your issue.
[2019-06-25 22:43:33]
kyokushin :
Gents, i completely forgot how i flashed the RC in Spark, I downloaded the firmwares. How to flash it now?
[2019-06-25 22:47:34]
quad808 :
this help?
[2019-06-25 22:59:35]
kyokushin :
thx, bt what do You think about .600 fw for spark for RC, worth to update?
[2019-06-25 23:12:18]
quad808 :
RC firmware doesn't matter, you can upgrade it fully
[2019-06-25 23:33:43]
kyokushin :
hmm, but older ones do not spread an aeroscope info
[2019-06-26 00:31:29]
kyokushin :
anyone remember how to connect to spark FTP? I cant downgrade a firmware, something stuck. I remember i connected in similar case in past and deleted update file from some cache folder, @jezzab?
[2019-06-26 02:22:20]
glhs958 :
192.168.42.2:21
[2019-06-26 04:29:25]
brett.e.burkhart :
It goes down from time to time. This is the thread you want <https://dji.retroroms.info/howto/apple_ios_patched_dji_go4>
and use Superimpactor. There’s a lot more involved with iOS you’ll find
[2019-06-26 09:09:26]
validat0r :
drone id is sent by the AC, not the RC
[2019-06-26 17:48:41]
kyokushin :
Guys, something went wrong
[2019-06-26 17:49:15]
kyokushin :
i tried to downgrade from .1000 to .900 one module and flashing stuck at 98%
[2019-06-26 17:49:46]
kyokushin :
at now spark is booting up, but not connecting to RC, i have an access to flash card by usb, but DUMLdore or NLD or assistant2 do not want to recognize it
[2019-06-26 17:50:05]
kyokushin :
DUMLDore just do not want to start, NLD is 'waiting for device'
[2019-06-26 17:50:14]
kyokushin :
any ideas how bring it to live?
[2019-06-26 17:52:50]
nocommie :
Just leave it on and connected to USB. Let it sit. It should connect and disconnect over and over. Eventually it should stay connected and you should see that the RC is connected. Then re-flash. Thanks to @quad808 for that advice!
[2019-06-26 17:53:20]
kyokushin :
yes, i connected, but i cannot re-flash it
[2019-06-26 17:53:33]
kyokushin :
because no one software want to do it
[2019-06-26 17:54:27]
kyokushin :
when i am turning it on its buzzing at beginning but do not come to the moment when is moving engines
[2019-06-26 18:08:53]
kyokushin :
nothing, i have no clue what to do :disappointed:
[2019-06-26 18:11:48]
bin4ry :
nld will pick it up once it renters flash mode
[2019-06-26 18:12:00]
bin4ry :
let it sit for several hours with usb connected
[2019-06-26 18:14:21]
kyokushin :
[2019-06-26 18:16:31]
kyokushin :
copter is just doing nothing, cooler is doing some noise, front leds are red rear blinking yellow
[2019-06-26 18:30:13]
nocommie :
Point a fan at it to keep it cool, leave it plugged in until NLD or assistant detects it and then re-flash it.
[2019-06-26 18:33:22]
kyokushin :
<https://youtu.be/pf-6HthWfWM>
[2019-06-26 18:34:09]
kyokushin :
at now after 20 minutes nothing, same status
[2019-06-26 18:35:46]
rickw001 :
are you not listening?put a fan on it let it go for a few HOURS
[2019-06-26 18:36:35]
kyokushin :
okay, but battery will hande few hours? Maybe i simply do not know something, why few hours may help? I am just asking.
[2019-06-26 18:39:58]
kyokushin :
@nocommie, It is not restarting over and over, just blinking as on recorded movie. It happend when i tried downgrade 801 module from .1000 to .900 (and flashing stuck at 98)
[2019-06-26 19:34:20]
kyokushin :
over na hour and still nothing :disappointed:
[2019-06-26 20:25:13]
quad808 :
If the drone is stuck in upgrade mode, you just need to let it sit. It will not show you that it got itself out of it. It has to rebuild the firmware, sort of...I have only seen P4's do this though
[2019-06-26 20:25:35]
quad808 :
the only way to check is to try and flash it
[2019-06-26 20:26:46]
kyokushin :
yes, it seems it stuck in upgrade mode, but as i wrote its not re-connecting as @nocommie mentioned
[2019-06-26 20:27:25]
quad808 :
If it won't even connect via USB, uhoh. Can you adb to it at all?
[2019-06-26 20:27:46]
kyokushin :
it is connecting via usb, i can reach photos
[2019-06-26 20:27:52]
kyokushin :
how can i connect by adb?
[2019-06-26 20:28:08]
quad808 :
what do you mean by... "i tried to downgrade from .1000 to .900 one module and flashing stuck at 98%"
[2019-06-26 20:28:22]
quad808 :
one version?
[2019-06-26 20:29:46]
kyokushin :
its a long story. I had .300 (all)after yesterday messing, i upgraded all to .1000 then removed NFZ, after that i wanted to downgrade only 305, 306, 801 to .300 but i had some issues with that, so i tried only to downgrade 801 to .900 to lowe the firmware number
[2019-06-26 20:31:02]
quad808 :
bricked, I bet
[2019-06-26 20:31:03]
kyokushin :
and the plan was to have 305/306/801 on .300, 905 cleared by NLD and the rest of modules on .1000 to have drone reported to dji go as .1000
[2019-06-26 20:31:31]
validat0r :
Oh boy
[2019-06-26 20:31:41]
quad808 :
whenever you do mixed firmware, you really need to know what you are doing. But, you can still connect via USB, so dunno
[2019-06-26 20:31:56]
quad808 :
did you try DJI Assistant?
[2019-06-26 20:32:02]
kyokushin :
yes, not recognizing
[2019-06-26 20:32:08]
quad808 :
DUMLdore?
[2019-06-26 20:32:43]
kyokushin :
DUMLdore do not want to start when i have that spark connected - i mean latest version. I tried on 2.14 and that is recognizing connected device but its going to hang up when i try to flash
[2019-06-26 20:33:19]
quad808 :
use latest DUMLdore, run it as admin, then connect spark, see if it detects it
[2019-06-26 20:33:47]
quad808 :
if not...might be bricked, but not sure
[2019-06-26 20:35:11]
kyokushin :
DUMLdore wont even start when i connect spark
[2019-06-26 20:35:19]
kyokushin :
i can only kill the process
[2019-06-26 20:35:45]
quad808 :
wait, start DUMLdore first, then connect spark
[2019-06-26 20:36:08]
quad808 :
does it detect it?
[2019-06-26 20:36:17]
kyokushin :
serial port not found, reconnect and restart
[2019-06-26 20:36:26]
quad808 :
uhoh
[2019-06-26 20:36:31]
quad808 :
not good
[2019-06-26 20:36:58]
quad808 :
let it sit while turned on, but doesn't look good
[2019-06-26 20:37:31]
kyokushin :
its a second spark what i killed in very similar way. It is possible to clear 905 NFZ by NLD then downgrade 305/306 but i noticed one thing
[2019-06-26 20:37:47]
kyokushin :
if you want to flash only 801 module then its a quick way to brick
[2019-06-26 20:38:20]
validat0r :
Hmm, i never tried to only flash 801 .. Sound far out
[2019-06-26 20:38:53]
kyokushin :
so correct way is to raise to .1000, remove NFZ, then flash all .300 except 905
[2019-06-26 20:39:00]
kyokushin :
avoid that
[2019-06-26 20:39:10]
validat0r :
You cannot just custom up/downgrade any combination you like .. There are dependencies
[2019-06-26 20:39:28]
kyokushin :
yes, i am just too noobish for it, do not know dependecies well
[2019-06-26 20:39:41]
kyokushin :
new mobo ordered, lesson learned, not first, not last
[2019-06-26 20:40:35]
kyokushin :
few weeks ago i cleared cafd's in my bmw 4, i almost ate my nails
[2019-06-26 20:43:17]
kyokushin :
After mobo replacement i probably stick with .1000 without NFZ or .300 + updated gimball+battery - that is rock solid mix
[2019-06-26 20:44:32]
validat0r :
Do full .0900 with custom fc
[2019-06-26 20:44:40]
validat0r :
Thats what i have
[2019-06-26 20:45:01]
kyokushin :
custom fc you mean 300?
[2019-06-26 20:46:04]
validat0r :
Nah .. .0900
[2019-06-26 20:46:04]
quad808 :
custom FC is best, but you COULD downgrade to 01.00.0300, then mix with 01.00.0900 with 305/306 removed, then run NLD NFZ patcher, but not necessary
[2019-06-26 20:46:30]
kyokushin :
why .900 not .1000?
[2019-06-26 20:46:45]
quad808 :
this would give you .900 files with .300 flight controller
[2019-06-26 20:46:46]
validat0r :
You paid for nld? Why not do their stuf
[2019-06-26 20:47:09]
quad808 :
no reason to use .1000, only security fixes
[2019-06-26 20:47:27]
kyokushin :
i paid to support a folks from that group who is doing that excellent job, in most i am not using nld, but i like it
[2019-06-26 20:48:08]
kyokushin :
i had it modded perfectly in very similar way, but something tempted me to get an iphone, and i wanted to have drone reported as .1000 to avoid asking for update
[2019-06-26 20:48:23]
validat0r :
Ah, ok
[2019-06-26 20:48:40]
validat0r :
There has to be a way to fake .1000
[2019-06-26 20:48:59]
kyokushin :
yes, you just need to update ad the end for example battery
[2019-06-26 20:49:06]
kyokushin :
and it will report as .1000
[2019-06-26 20:49:15]
quad808 :
ahhh....thats why you go to 01.00.0300, then use mixed. Firmware version will be reported as last version flashed
[2019-06-26 20:49:24]
kyokushin :
yes
[2019-06-26 20:49:26]
validat0r :
I bet you could craft a custom fw with report as .1000
[2019-06-26 20:49:56]
kyokushin :
but i messed some thing with order
[2019-06-26 20:50:20]
kyokushin :
removing of NFZ - in NLD its written you need to have ALL modules on same f/w
[2019-06-26 20:50:24]
kyokushin :
so i stick to it
[2019-06-26 20:51:32]
kyokushin :
so i went to 1000, removed NFZ, then tried to downgrade only 305/306/801/802 and after that upgrade do 1000 without 305/306/801/905
[2019-06-26 20:51:35]
kyokushin :
but something fucked
[2019-06-26 20:52:35]
kyokushin :
i was unable to downgrade only 305/306/801/802 and tried to downgrade 801 to .900. Why 801? to just lower it version, it was mistake
[2019-06-26 20:53:24]
kyokushin :
yesterday i did everything of that but without 801... i had half year break and forgot about Aeroscope
[2019-06-26 20:53:35]
kyokushin :
801 from .300 have no aeroscope data
[2019-06-26 20:55:04]
validat0r :
Sure?
[2019-06-26 20:55:10]
kyokushin :
yes
[2019-06-26 20:55:26]
kyokushin :
almost one year ago i tested it by kismet
[2019-06-26 20:55:46]
kyokushin :
.300 is the last f/w without aero (that hostile told me)
[2019-06-26 20:55:50]
validat0r :
Well. As I said .. I think spark drone Id is incomplete anyway
[2019-06-26 20:56:26]
kyokushin :
i not tested later firmwares, but heard there are fields with drone and operator location (gps)
[2019-06-26 20:56:36]
kyokushin :
in .300 there are no such fields
[2019-06-26 21:00:16]
validat0r :
Well, not in the .0900 packets i dumped
[2019-06-26 21:01:11]
kyokushin :
i know 801 in 900 and 1000 are different
[2019-06-26 21:01:36]
kyokushin :
a differ should be OTG, but who knows its something more
[2019-06-26 21:02:05]
kyokushin :
surely worth tryig because .1000 is last and quite old f/w and Spark will probably never get newer.
[2019-06-26 21:03:01]
kyokushin :
i have a hope in next week my spark return with new mobo and fun start over agan. I have a feeling it will be not first mobo replaced... because its second one i bricked
[2019-06-26 21:04:38]
validat0r :
Drop me a line, we can work that out
[2019-06-26 22:06:09]
papareproductora :
Hi! I had a trouble like that with my mavic. I thought that it were bricked but turns out that waiting wasn't the solution. I put a fan on the dissipator to keep it cool and rebooted it several times until it booted. Patience was the key to that.
[2019-06-26 22:07:04]
papareproductora :
And I received a LOT of help from this group to do that. It got stuck after a bad ordered update like yours
[2019-06-26 23:21:48]
kyokushin :
by turning it on and off?
btw, when i am turning it off the 4 leds are gonna red.
[2019-06-26 23:25:23]
kyokushin :
After i turn it on a gimball is working...
[2019-06-27 20:55:55]
rickw001 :
I don't want a drug,I like my mavic pro
[2019-06-27 22:01:58]
teslahv :
Used to say that too ;)
[2019-06-28 08:30:34]
lolo780 :
Both have their place. I used the M2 today in active track profile, apas on, and it maneuvered around overhanging branches while flying sideways.
[2019-06-28 08:30:49]
lolo780 :
Cycling speed
[2019-06-28 10:34:27]
teslahv :
Ye ok that's correct.
[2019-06-28 13:36:02]
reaktor :
Parrot Disco with 4G mod is another drug. 40km flights! And it wont show up on Aeroscope.
[2019-06-28 14:54:26]
originaldobo007 :
Someone should sell pre-modded Disco 4G birds. Probably will sell well.
[2019-06-28 15:59:52]
teslahv :
^^
[2019-07-03 13:25:55]
b3019199 :
Hi, I wanted to take a quick at the firmware dumps (<https://dji.retroroms.info/howto/mavic_2_firmware>), but I fail to identify the entrypoint (init scripts). Are the dumps incomplete, or am I just being dumb? (Android internals n00b btw)
[2019-07-03 18:31:14]
michael470 :
Android runs its own init <https://android.googlesource.com/platform/system/core/+/master/init/README.md>
[2019-07-03 18:31:25]
michael470 :
Start at /init.rc
[2019-07-03 20:38:57]
d.cernak :
!apk
[2019-07-04 01:32:48]
daviskat :
Why can't init.rc be modified? Init.rc returns to its original state when the aircraft restarts.
[2019-07-04 01:35:13]
daviskat :
Is it a temporary file created when the drone is turned on?
[2019-07-04 11:17:05]
mefisto :
it is probably on ramdisk. When Android (other Linuxes as well, depending on configuration) starts, it creates a ramdisk where it decompresses file "initrd". So files on that ramdisk can be changed, but after reboot, original initrd will be loaded again. Google "initrd" to learn details, including how to modify it anyway.
[2019-07-04 14:16:38]
daviskat :
thx
[2019-07-04 14:55:04]
pak2014 :
Can you 4g mod dji drones like the disco?
[2019-07-04 14:56:15]
pak2014 :
I see a mention of 4g in my smart controller
[2019-07-08 12:58:09]
t-swindell :
I believe someone is trying, but not as far as I'm away.
[2019-07-12 01:02:50]
dabudesign :
Hey team, grateful for this resource.
When flashing a Mavic pro using DUMLdore, after the status bar fills to 100%, it just hangs.
Is this normal? How long does it typically take to flash firmware using this method?
[2019-07-12 01:03:36]
dabudesign :
I've had not luck using DJI Assistant 2 - get the undefined 0x020106 error there
[2019-07-18 18:45:14]
t-swindell :
Which apk disables the dji login?
[2019-07-18 23:06:31]
digdat0 :
@dabudesign the flash will restart the aircraft one last time at 99/100% and the lights should show good. Check with the RC, if you can connect its done and good to go. Usually I only wait 2 mins max
[2019-07-21 12:43:29]
flymymavic :
this happens with windows 7, but not with win10
[2019-08-06 10:31:37]
matasgx :
Hey gyus any other ways of moding altitude limit in mavic 2 pro without using NLD mod client?
[2019-08-06 10:55:07]
validat0r :
Nothing public yet
[2019-08-06 14:14:03]
bin4ry :
even NLD cannot mod altitude on M2
[2019-08-11 03:40:45]
b7438265 :
any way to activate a mavic air Offline? DUMLdore-3.20 don't work
[2019-08-12 08:08:14]
cs2000 :
you cant
[2019-08-12 17:01:39]
schuhfreund :
hey guys, I'm planning to flash custom firmware (v01.03.07 + v01.04.03) on my mavic platinum. Does somebody know which flight modes will get lost?
[2019-08-12 19:08:36]
bobdole :
man you've been reading some old stuff
[2019-08-12 19:09:35]
bobdole :
the patcher is what you want. use v01.04.0300 and patch the fc module without losing anything... and now there's even a script that makes it easier
[2019-08-12 19:56:52]
brett.e.burkhart :
<https://github.com/brett8883/DJI_Super-Patcher>
[2019-08-12 20:24:01]
schuhfreund :
wow looks amazing, thx
[2019-08-15 13:14:14]
schuhfreund :
any1 here with some exp in dji offline activation?
[2019-08-15 13:34:46]
cantrepeat :
what drone?
[2019-08-15 13:35:44]
cantrepeat :
dumldore has that feature built into v3.20 for some birds
[2019-08-15 14:38:23]
schuhfreund :
mp platinum
[2019-08-15 14:40:29]
schuhfreund :
I'm aware about dumldore, my questions are more related to stay undercover from dji after offline activation.. Like can I use the dji go 4 app regulary or only w/o internet connection etc.
[2019-08-15 16:48:18]
quad808 :
And.....how do you plan to stay off of DJI radar if you are REQUIRED to be logged into the DJI GO app to use it with your DJI Account??
[2019-08-15 16:52:52]
cantrepeat :
I know, I know, use NLD GO app!!!
[2019-08-15 17:00:37]
quad808 :
If using stock GO, I would: use dedicated device. Log in once with DJI Account. Download offline maps. Dedicated device used only in airplane mode, with DJI GO app fire walled. Never sees internet. If you need to download more offline maps, remove all flight records from device before doing so, but if you really want to be secure, reset device, download new DJI GO, login, download offline maps. Firewall again. This way minimal to zero chance activated bird is tied to your account, but thats me. DJI lies when they tell you that you are in control of what data they receive. Bunch of B.S. Or, use NLD GO, or patch your own to be offline.
[2019-08-15 17:11:40]
cantrepeat :
But really, for the price easy of use and peace of mind it's a no brainer.
[2019-08-15 17:20:44]
fredmicrowave :
This is what i have always done, except I don't use maps, so even simpler... When you don't get used to map, you don't miss them at all. And the radar and camera view are enough to navigate.
[2019-08-15 17:27:33]
quad808 :
This is true. I don't usually use the maps anyway.
[2019-08-15 19:18:24]
fredmicrowave :
You can buy relatively cheap iphones that have a sim card reader, baseband, no signal, simlock, sound, camera ... problem.
Iphone6 works perfectly for that. (But in case of baseband problem, never ever make a factory reset)
[2019-08-18 05:48:26]
cat.db :
Does anyone know how to repack bin file to fw.sig ？
[2019-08-18 05:49:17]
cat.db :
i extract fw.sig file to bin ,.but don not know how to repack to fw.sig file.
[2019-08-18 19:14:14]
mefisto :
To sign, private key is needed. Change the key in INI file to one we have private part - SLAK (note: unmodified drone will not recognize SLAK key).
[2019-08-21 10:24:56]
mefisto :
@orangeclassmate here, I checked whether it works properly. To elf and back, changing auth key in the process.
[2019-08-21 10:26:56]
cat.db :
thanks, i will try it again. thanks!!!
[2019-08-26 19:44:33]
ziggy :
Hi Guys, I wish you all a wonderful week :slightly_smiling_face:
[2019-08-26 19:46:54]
ziggy :
Would anyone be so kind and tell me if there is a way to downgrade my GL300B RC from 1.9.2 to 1.5.8? All dji Go apps, official and patch don't show the downgrade option when holding the icon top right more than 10 seconds. I only get an empty FW dropdown and some code
[2019-08-26 19:50:06]
ziggy :
My goal is to get maximum distance on a 1.7.6 and 1.5.9 RC stack as this is supposed to be the 'gold standard'
[2019-08-26 20:04:44]
mefisto :
download upgrade fw, then go to android file system and replace it with old version. then hit upgrade.
[2019-08-30 00:38:10]
hansen.mmb :
Hello all. I've just started to get into the firmware binaries. I've downloaded an RC mavic binary, since it was recognized by file as a tar file, I un-tarred it. Now there are a few *.pro.fw.sig files. If I binwalk those, I can see a lot of android system files, but I'm not sure where to go from here. As far as I understand, the firmware should contain a standard filesystem. I'd like to take a look at the files and see what shell scripts or compiled tools there are. Any advice on what to do next?
[2019-08-30 02:10:20]
quad808 :
!wiki
[2019-08-30 03:11:14]
brett.e.burkhart :
@hansen.mmb <https://github.com/o-gs/dji-firmware-tools>
[2019-09-16 08:29:43]
manteiguita :
hello everyone, there's anyway to surpass the radius on mavic 2 pro?
[2019-09-16 08:29:53]
manteiguita :
i just can fly 30X30 meters
[2019-09-16 13:36:56]
cantrepeat :
beginner mode? I don't have a mavic 2 so just guessing
[2019-09-16 17:17:25]
bobdole :
i think flying without a gps lock does something similar
[2019-09-16 17:18:17]
bobdole :
or maybe update your app
[2019-09-29 04:51:28]
jabuasab :
Do you have to pay $50 per drone for NLD?
[2019-09-29 05:00:12]
jabuasab :
@czokie
[2019-09-29 05:24:54]
bin4ry :
yes
[2019-09-29 16:42:38]
jabuasab :
has that always been the case?
[2019-09-29 16:42:52]
jabuasab :
@bin4ry
[2019-09-29 16:57:35]
bin4ry :
yes
[2019-09-29 16:58:46]
bin4ry :
it was always a per drone license bound to your drone SN. if you get a replacement from dji for a broken drone you can upload the letter from dji and get the license transferred to your new drone.
[2019-09-29 23:41:26]
rickw001 :
it use to be less
[2019-09-29 23:41:55]
rickw001 :
inflation
[2019-09-30 00:01:53]
cantrepeat :
Hookers and cocaine went up in price so you gotta pay for it some how!
[2019-10-11 17:21:31]
brett.e.burkhart :
So iOS guy here. Tried for the first time to do deejayeye-modder just for fun and great work @bin4ry and everyone who has contributed. One think that isn't clear to me, however, is during the Windows versions when it asks you to select the patches but it says "NO [Patch_name]." Are you selecting the patches you want or dont want at that point
[2019-10-11 17:29:39]
quad808 :
you select the patches you WANT
[2019-10-11 17:30:45]
quad808 :
linux version is better for compiling, more options. Been a while since I had to compile one
[2019-10-11 17:34:54]
brett.e.burkhart :
Ahh I get it now. Selecting an option changes "NO" to "YES" now it makes sense. Thanks.
[2019-10-12 09:53:44]
flymymavic :
@brett.e.burkhart Does DJM now include working google maps, i did a video showing how to inject the API keys
[2019-10-12 20:40:18]
brett.e.burkhart :
I’m not sure. I dont actually have an Android device. I was just kinda checking it out to see what mods were available and how difficult it was.
[2019-10-30 21:25:49]
andrwho25 :
its been a while, but what ios app do i need to run to use nld for m2?
[2019-10-31 00:01:42]
bobdole :
there's no m2 nld app and anything currently out there (nfz removal, range boost, etc) is all on the drone and not reliant on anything in the app.
[2019-10-31 05:23:28]
andrwho25 :
is it safe to use stock Go app ?
[2019-10-31 10:11:41]
cs2000 :
yes
[2019-10-31 22:06:53]
andrwho25 :
is there any chance the stock go will somehow revert the changes i made to the drone with respect to nfz and boost
[2019-10-31 22:23:06]
quad808 :
boost, no...nfz...maybe. Always start up: drone--RC, connect. Then connect device with GO to avoid stock GO from overriding the NFZ.
[2019-10-31 22:23:35]
quad808 :
but this is DJI we are talking about and they could push any "fix" they want with a connected GO app...and then deny it.
[2019-11-01 04:54:02]
andrwho25 :
ah kk
[2019-11-04 21:43:53]
d.cernak :
!apk
[2019-11-08 14:28:55]
jakub :
is it possible to enable/disable ATTI mode via SPORT switch? my knowledge got rusted over time :wink:
[2019-11-08 14:29:11]
cs2000 :
Which bird? MP1, yes it is
[2019-11-08 14:30:04]
jakub :
via DJI Assistant? if so which key:value pairs should I swap
[2019-11-08 14:30:14]
cs2000 :
Yep, the parameter is
g_config_control_control_mode[1]
[2019-11-08 14:30:39]
cs2000 :
Should be 8 as default, to make the "sport" switch control Atti mode insted, change it to a 3
[2019-11-08 14:30:41]
cs2000 :
<https://dji.retroroms.info/howto/parameterhacks>
[2019-11-08 14:32:08]
jakub :
great, thank you :slightly_smiling_face:
[2019-11-08 14:32:49]
cs2000 :
np :slightly_smiling_face:
[2019-11-27 18:58:21]
loli88ie :
Hello everyone!
[2019-11-27 19:22:52]
digdat0 :
anyone else notice that !apk serves up a GO4 apk instead of Go3? The Go3 link should be <http://dankdronedownloader.co.uk/NLD_Downloads/Go3-nosecneo.apk> .. im not sure who has access to edit the !apk thing
[2019-11-27 20:27:01]
cs2000 :
Il sort it tomorrow @digdat0 if nobody beats me too it:+1:
[2019-11-28 00:18:45]
digdat0 :
cool thanks @cs2000 I updated the wiki, but wasnt sure about slack. cheers man!
[2019-11-28 08:19:57]
cs2000 :
@digdat0 Fixed :slightly_smiling_face: !apk
[2019-12-01 21:28:43]
pingspike :
is there a word that defines or describes the type of firmware in older drones versus "current generation" ? eg. Inspire 1 vs Mavic Pro, the firmwares are wildly different, compared to say Mavic Pro vs Mavic 2
[2019-12-01 21:28:49]
pingspike :
what do we call that older generation of firmware?
[2019-12-01 21:28:56]
pingspike :
does that even make sense?
[2019-12-02 12:07:12]
cs2000 :
Not really, we dont differentiate between types, firmware is firmware :)
[2019-12-02 13:51:01]
mefisto :
The old firmware packages were starting with hex 12345678 or something like that, and in LE ASCII it translates to 'xv4' - so we sometimes call these 'xv4'.
The new ones start with 'IM*H', so we sometimes call them 'imah'.
This is the naming used in dji-firmware-tools, at least.
[2019-12-02 13:53:24]
mefisto :
and for sub-versions of the imah format - I version them by the year I first see the new format. See here:
<https://github.com/o-gs/dji-firmware-tools/blob/master/dji_imah_fwsig.py#L181>
[2019-12-02 14:35:53]
cs2000 :
I stand corrected :wink:
[2019-12-02 16:10:56]
validat0r :
what does MCU stand for in the UAV context?
[2019-12-02 16:36:57]
pingspike :
ok good to know - thanks :+1::skin-tone-2:
[2019-12-08 22:47:45]
fstephan1 :
I try to Flash Firmware 1.00.510 to Mavic 2 using dumldore. Dumldore load the bin file. But if i try to Flash, i got the message "transfering file to device" an 3 sec. later dumldore crash (close window). Any solution?
[2019-12-09 05:14:15]
bin4ry :
you know that you can’t downgrade anymore after that and that your are stuck for good on 510?
[2019-12-09 07:12:36]
fstephan1 :
no i have 1.00.0300 un the bird.
[2019-12-09 07:30:27]
bin4ry :
so why do you want to update to a non modable and non downgradeable version
[2019-12-09 07:30:40]
bin4ry :
that is really strange what you want to do
[2019-12-09 09:24:41]
fstephan1 :
the go app won't fly, force me to update first.
[2019-12-09 11:16:26]
bin4ry :
not true
[2019-12-09 11:16:35]
bin4ry :
there must be another problem
[2019-12-09 11:16:48]
bin4ry :
did you fuck up your versions somehow?
[2019-12-09 11:16:59]
bin4ry :
You can perfectly fly and m2 on an old firmware
[2019-12-12 02:03:09]
wj7106 :
Is there a message that the new firmware of mavic2pro removes NFZ?
[2019-12-17 11:57:20]
ctermure :
Hello. any active project for Mavic Mini? for power tweaks like 2.3 or 2.5Ghz freq?
[2019-12-17 12:02:12]
markusfriedl :
in the mavicmini group there are few tweaka to set config parameters to fly up/down faster for example
[2019-12-18 09:06:25]
cs2000 :
MM will also be supported by NLD soon
[2019-12-18 10:13:07]
heresmydron :
Dont play with my feelings
[2019-12-18 10:32:48]
wj7106 :
I want to know if there is any news about the new firmware of mavic2!
[2019-12-18 10:52:56]
dronepilot :
M2 we are missing some nld love. :cry:
[2019-12-18 11:29:20]
cs2000 :
Im copying bin4ry's statement from ~nld as its self explanatory
Just in general there won’t be any statements about internal developments as this was bad in the past, but there is absolutely no plan to abandon m2 in contrary, we are working extremely hard to get newer firmwares supported.
However Mini will get some support very soon too.
[2019-12-18 13:30:05]
dronepilot :
Thanks @cs2000 :+1::skin-tone-2:
[2019-12-18 13:45:54]
cantrepeat :
All very good news!
[2019-12-18 14:04:24]
fredmicrowave :
Filosofically speaking, it is only good news If we will be still alive when this happens :stuck_out_tongue:
[2019-12-18 19:21:40]
quad808 :
No one is stopping anyone from rolling up their sleeves and helping, instead of waiting and doing squat.
[2019-12-18 19:35:41]
fredmicrowave :
I was just kidding. I am very happy with NLD, Mp2 is working great on .100, and the only fact that it could be unlocked is more than enough.
If there is no hope of altitude removal, i have not much to expect from a new release, so I'm good with that one.
[2019-12-18 22:05:51]
dronepilot :
hahahhaha wished mine M2 did downgrade to .100
[2019-12-19 02:19:40]
fredmicrowave :
You can laways sell yours and buy one older that has never been upgraded...
[2019-12-19 23:57:13]
billyjoesteadman :
Whats everyone's opinion on these motor caps I'm tempted to take them off they rattle quite a bit when you shake the drone lightly
[2019-12-20 11:16:18]
validat0r :
Very festive indeed
[2019-12-20 13:49:54]
markusfriedl :
I guess the weight is then above 250g right? :upside_down_face:
[2019-12-20 13:50:38]
billyjoesteadman :
Yep but in the UK I have the license to fly over that
[2019-12-20 13:51:24]
billyjoesteadman :
Just got to put my licence number somewhere on the drone
[2019-12-20 21:00:23]
pingspike :
do those caps not trap the heat in? :thinking_face:
[2019-12-20 21:02:09]
billyjoesteadman :
No idea I haven't had a chance to fly it been raining for 2 days now
[2019-12-20 21:04:02]
pingspike :
yeah tell me about it, was working over in York today, half of it was under water still :pensive:
[2019-12-22 10:49:29]
marlasr :
good morning, need a bit spoon feeding
[2019-12-22 10:49:32]
marlasr :
having spark
[2019-12-22 10:50:13]
marlasr :
want radio switched to FCC and able to use OTG.... what's preferred method to achive it?
[2019-12-22 10:50:48]
marlasr :
4.1.15 without secneo and DJeye modder?
[2019-12-22 11:08:43]
validat0r :
I use .14, but .15 should work fine as well with spark, FCC and otg on deejayeyemod
[2019-12-22 11:12:45]
marlasr :
how about google offline maps?
[2019-12-22 11:12:56]
marlasr :
does it work with 4.1.15 or need 4.1.22 for that?
[2019-12-22 11:13:15]
marlasr :
tnx
[2019-12-22 16:23:20]
b1tninja :
anyone document a uart for the 1860
[2019-12-22 16:23:32]
b1tninja :
i think i spotted one but dont have a fancy logic analyzer etc
[2019-12-22 16:23:51]
b1tninja :
and before I go soldering pins onto the board thought i'd ask
[2019-12-22 20:48:27]
originaldobo007 :
Does anyone know the parameter name to specify non DJI battery?
[2019-12-22 20:51:32]
validat0r :
battery_type = 1 (DJI Smart Battery = 1, non-DJI Battery = 2)
[2019-12-22 21:03:32]
originaldobo007 :
Even on P4P2?
[2019-12-22 21:03:46]
originaldobo007 :
Change it to “2”?
[2019-12-22 21:04:30]
validat0r :
I wouldn't know
[2019-12-22 21:04:56]
validat0r :
Spark, mini, mavic I know
[2019-12-22 21:28:46]
digdat0 :
p4pv2 should be "name" : "battery_type"
[2019-12-22 21:29:14]
digdat0 :
if you set to 2, you should get non-DJI. BUt, battery %% may show 0%, if so change to 3 and you should get the % back
[2019-12-22 21:47:57]
originaldobo007 :
Thanks!!!
[2019-12-23 13:24:40]
originaldobo007 :
@digdat0 One more question - what's the parameter name for RTH speed?
[2019-12-23 13:31:44]
validat0r :
g_config_go_home_gohome_idle_vel
[2019-12-23 13:32:45]
validat0r :
on spark you have to disable numerous obstacle avoidance features to have like full speed rth (14-16m/s)
[2019-12-23 13:32:58]
validat0r :
maybe it's the same on p4pv2
[2019-12-23 13:41:48]
originaldobo007 :
Thanks!!!!
[2019-12-23 13:42:45]
originaldobo007 :
I never have obstacle avoidance on. Just returning at 22mph is lame - no reason I can't set it to 13 m/s
[2019-12-23 13:43:03]
originaldobo007 :
And frankly, obstacle avoidance in p4p2 goes up to 14 m/s anyway
[2019-12-23 13:43:11]
originaldobo007 :
@ilovemynexus4 Thanks buddy!
[2019-12-23 13:43:33]
validat0r :
try it and report back
[2019-12-23 13:44:28]
originaldobo007 :
Will do! It's funny how I can't access the debug mode on a version of Assistant that supports the P4P2, but hooking it up to NLD gives me access to the parameters
[2019-12-23 13:45:26]
validat0r :
version 1.1.2 doesnt support p4p?
[2019-12-23 13:45:40]
originaldobo007 :
Not P4P2.0
[2019-12-23 13:45:51]
originaldobo007 :
It won't register when the drone is connected
[2019-12-23 13:45:52]
validat0r :
dang
[2019-12-23 13:46:07]
originaldobo007 :
At least NLD somehow gives me the parameters
[2019-12-23 13:46:12]
originaldobo007 :
So...no harm.
[2019-12-23 13:46:49]
validat0r :
with mini i'm using comm_og_service_tool.py of the dji-firmware-tools
[2019-12-23 13:47:02]
validat0r :
not as convenient as the assistant, but it works
[2019-12-23 13:47:16]
originaldobo007 :
Hey - at least it gets the job done!
[2019-12-23 13:47:44]
originaldobo007 :
So far, I've got alt and NFZs unlocked on my P4P2. Also changed the battery setting to "3".
[2019-12-23 13:48:03]
originaldobo007 :
I've tweaked the ascent and descent speeds
[2019-12-23 13:48:09]
originaldobo007 :
Now just need to tweak RTH speed
[2019-12-23 13:48:17]
originaldobo007 :
And I'll have my fully unlocked bird!\
[2019-12-23 13:48:26]
validat0r :
yes indeed .. we really need a GUI for parameter manipulation on arbitrary dji drones ..
[2019-12-23 13:48:43]
originaldobo007 :
Totally agree
[2019-12-23 13:49:00]
originaldobo007 :
I'll keep my fully unlocked bird until the M3 comes out - whenever that is
[2019-12-23 13:49:01]
validat0r :
should be an awesome drone with these modifications
[2019-12-23 13:49:10]
originaldobo007 :
Agreed.
[2019-12-23 13:49:27]
originaldobo007 :
The video quality on the P4P series is better than M3P
[2019-12-23 13:49:29]
originaldobo007 :
M2P
[2019-12-23 13:49:31]
originaldobo007 :
sorry!
[2019-12-23 13:50:06]
originaldobo007 :
Thanks @ilovemynexus4 for your help!
[2019-12-23 13:50:18]
originaldobo007 :
All you guys on here - you're the FUCKING BEST
[2019-12-23 13:50:38]
originaldobo007 :
And I want to wish ALL of you happy holidays and a fucking AWESOME New Year
[2019-12-23 13:50:53]
originaldobo007 :
May 2020 give us some new DJI drones to hack!!!!!
[2019-12-23 14:06:10]
exumpw :
@ilovemynexus4 GUI app could be easily done in C# or Java with all info about querying and setting parameters out there in o-gs/dji-firmware-tools. I am not much into gui designing though, I might give it a try someday.
[2019-12-23 16:29:24]
markusfriedl :
@exumpw would be quite simple in java... i'll think about it ;) would be really handy
[2019-12-23 18:55:28]
validat0r :
I'd help with duml stuff if some would pick up the GUI thing
[2019-12-23 18:55:42]
b1tninja :
whats being done
[2019-12-23 18:56:29]
b1tninja :
I would be somewhat interested in interfacing either the "Services" in DJI Assistant or the shared libs
[2019-12-23 18:56:45]
b1tninja :
I've only been working on mavpro
[2019-12-23 19:01:18]
b1tninja :
i'd do c#
[2019-12-23 19:01:36]
b1tninja :
which params
[2019-12-23 19:01:51]
b1tninja :
arent a lot of them just in the json
[2019-12-23 19:16:07]
markusfriedl :
I'm thinking of a quite small gui.. that allows you to set the path to the dji-firmware-tools-master on opening it would query the list of known parameters via FlycParam list... then you can choose a parameter which would implictly call the get command to show the min/max/default/actual values.... last thing then would be the set command to override the actual value... any additional suggestions?
[2019-12-23 19:16:55]
b1tninja :
how are the parameters queried/ranges known
[2019-12-23 19:17:18]
b1tninja :
being able to load / save and compare would be bonus points
[2019-12-23 19:17:25]
exumpw :
new drones query by index, old (p3) by hash
[2019-12-23 19:17:33]
exumpw :
also new ones have multiple (2) tables
[2019-12-23 19:17:56]
b1tninja :
where are these files
[2019-12-23 19:18:04]
b1tninja :
I haven't looked at the flight params
[2019-12-23 19:18:46]
exumpw :
also there are cmd table to perform some debug actions - calibrate, turn off led etc
[2019-12-23 19:19:51]
b1tninja :
happen to know the path of this stuff on the mav
[2019-12-23 19:20:12]
b1tninja :
or ill look at djeyemodder thing
[2019-12-23 19:21:42]
exumpw :
you can find tables in decrypted fc 0306 module binary statically or query by duml commands. All this stuff done in dji-firmware-tools.
[2019-12-23 19:22:45]
b1tninja :
so like a front end for <https://github.com/o-gs/dji-firmware-tools/blob/master/dji_flyc_param_ed.py>
[2019-12-23 19:23:14]
exumpw :
flyc_param_ed searches in binary statically.
[2019-12-23 19:23:36]
exumpw :
like front end for comm_og_service_tool.py
[2019-12-23 19:24:16]
exumpw :
but can be done standalone, cause parsing duml comm packet is piece of cake with all info provided
[2019-12-23 19:25:52]
b1tninja :
what about a glib/gtk front end, assuming we would reuse the python?
[2019-12-23 19:27:56]
b1tninja :
its not the best... like most people would have .net installed
[2019-12-23 19:28:06]
b1tninja :
but would likely have to bundle the gtk crap--- like deluge does
[2019-12-23 19:29:56]
exumpw :
java is best cross platform I guess, but I have not much experience with it, especially gui stuff. I could make comm duml part easily though, if someone interested.
[2019-12-23 19:30:24]
b1tninja :
eh I am opposed to java, but .net core would be cross plat
[2019-12-23 19:30:41]
b1tninja :
and i could contribute there
[2019-12-23 19:30:49]
b1tninja :
i mean you're not wrong
[2019-12-23 19:30:50]
b1tninja :
but I hate java
[2019-12-23 19:31:10]
b1tninja :
=p
[2019-12-23 19:31:18]
exumpw :
no fan either
[2019-12-23 19:31:30]
b1tninja :
like the only thing worse than java
[2019-12-23 19:31:32]
b1tninja :
is java script
[2019-12-23 19:31:54]
b1tninja :
well thats backwards
[2019-12-23 19:31:58]
b1tninja :
anyway
[2019-12-23 19:32:01]
b1tninja :
let me look through this py
[2019-12-23 19:32:35]
b1tninja :
have you poked around in the assistant apps
[2019-12-23 19:33:44]
b1tninja :
idk the rules about this stuff, but the key--- is there a way to derive or extract it instead of hard coding it, for legal reasons
[2019-12-23 19:36:08]
exumpw :
no idea about that. Only thing I can say assistant use same duml comm packets obviously to get query these params.
[2019-12-23 19:36:34]
b1tninja :
they abstract it to an extent
[2019-12-23 19:36:36]
exumpw :
most of stuff done using this protocol
[2019-12-23 19:36:41]
b1tninja :
like there is Remote Controller service
[2019-12-23 19:36:50]
b1tninja :
that implements LightBridge, LC1860 , P3 etc
[2019-12-23 19:37:09]
b1tninja :
so that could be a neat way to make it compatible with future devices
[2019-12-23 19:37:23]
b1tninja :
but as for the UI stuff
[2019-12-23 19:37:36]
b1tninja :
i've always got a few projects im working on, but I can add it to the list
[2019-12-23 19:38:08]
b1tninja :
specifically you want to query the flight params via serial/usb ?
[2019-12-23 19:38:17]
b1tninja :
and bec able to edit them visuall
[2019-12-23 19:39:03]
exumpw :
I think duml not changed since p3 to m2 and mini, only some packets change.
[2019-12-23 19:39:28]
exumpw :
and flyc wont let modify param beyond its max and min limits
[2019-12-23 19:39:28]
b1tninja :
yeah I think duml the same maybe some addresses different or new strings/ids
[2019-12-23 19:40:41]
dkovar :
Java is annoying but so many people know it, it is easy to work with even if you don't know it, and it is cross platform. Anything .net, not so much.
[2019-12-23 19:41:02]
b1tninja :
well there is .net core now tho
[2019-12-23 19:41:11]
b1tninja :
plzzz no java
[2019-12-23 19:41:16]
exumpw :
I made patch in ~android_apk_patching to access duml using dji go, so can be done in android on the fly as well, but yes, we were talking about pc over comm serial
[2019-12-23 19:41:31]
b1tninja :
the latest version of java makes me particularly ragey
[2019-12-23 19:41:48]
b1tninja :
they had a standard way of launching a fucking jar for over a decade
[2019-12-23 19:41:54]
b1tninja :
"lets change that for no reason"
[2019-12-23 19:41:56]
exumpw :
also @bin4ry shared way to use on android even without go
[2019-12-23 19:43:07]
b1tninja :
oh
[2019-12-23 19:43:12]
b1tninja :
is android an option
[2019-12-23 19:43:14]
b1tninja :
like an app
[2019-12-23 19:43:28]
b1tninja :
*does not support ios*
[2019-12-23 19:43:44]
b1tninja :
*also pretends android isnt' java*
[2019-12-23 19:44:24]
exumpw :
I just have no idea about ios at all, but probably use some similar way in ios. Its all just serial overall.
[2019-12-23 19:50:24]
exumpw :
are there even mods for ios go or just that config file to set fcc?
[2019-12-23 19:55:09]
b1tninja :
no idea
[2019-12-23 19:55:26]
b1tninja :
but they can get it working by getting an android or running an emulator =p
[2019-12-23 19:55:42]
b1tninja :
or is pc prefered
[2019-12-23 19:56:18]
b1tninja :
i like the droid because potential to reuse some of their libs
[2019-12-23 19:56:47]
exumpw :
some magic with Frida hooks
[2019-12-23 19:56:54]
exumpw :
<http://dji.retroroms.info/howto/iosfrida>
[2019-12-23 19:57:43]
exumpw :
reminds me winapi32 splicing hooks
[2019-12-23 20:03:27]
b1tninja :
since the libs are dynamically linked too theres lots of room to inject/hook stuff
[2019-12-23 20:03:37]
b1tninja :
i think theres a duml command to read/write memory
[2019-12-23 20:10:40]
exumpw :
Frida is pretty interesting and promising according to wiki, you can just swap method, if only I had ios device)
[2019-12-23 20:11:47]
exumpw :
I guess it is somewhat hook on call
[2019-12-23 20:12:36]
exumpw :
or some sort of vmt table patch
[2019-12-23 20:13:34]
markusfriedl :
thought about a gui like this... but would need an additional dropdown the select the AC
[2019-12-23 20:13:41]
markusfriedl :
[2019-12-23 20:14:32]
validat0r :
well i liked the assistant's prameter interface ..
[2019-12-23 20:14:32]
exumpw :
why not make it as table as in assistant?
[2019-12-23 20:14:40]
validat0r :
:smile:
[2019-12-23 20:16:29]
exumpw :
Its not a request, but I would also set param just when you finish editing text box, I dont think confirming is necessary, should not be able to hurt something with wrong param.
[2019-12-23 20:17:15]
markusfriedl :
@ilovemynexus4 will think about it :smile:
[2019-12-23 20:18:16]
markusfriedl :
@exumpw we can talk about that if the first version is running :stuck_out_tongue:
[2019-12-23 20:20:41]
exumpw :
btw youll need to detect drone model as well
[2019-12-23 20:21:13]
exumpw :
in comm_og_service_tool its set manually I think
[2019-12-23 20:22:19]
exumpw :
I dont even know what ids are for P4PV2, M2, Mini.
[2019-12-23 20:24:20]
exumpw :
in dji go 4.22 there are product ids up to Mavic, Spark, P4. But I guess can be easily queried by someone who actually has new drones at hand.
[2019-12-23 20:26:05]
markusfriedl :
the product id's are in comm_og_service_tool.py .. i would put them in a hash map and make them choosable via dropdown
[2019-12-23 20:26:46]
exumpw :
are they? are you talking about wm***?
[2019-12-23 20:32:47]
markusfriedl :
yes... and the name is on the right side... so a hashmap should do the trick :wink:
[2019-12-23 20:33:39]
exumpw :
I think its rather flyc id (or product code) than product id, not sure what packet queries it.
[2019-12-23 20:46:55]
markusfriedl :
@exumpw it would look like this
[2019-12-23 20:53:36]
exumpw :
I get it. I was thinking about getting product id using duml, not manually drop down.
[2019-12-23 20:58:19]
markusfriedl :
could also do it... but it's much easier that way
[2019-12-23 20:59:36]
b1tninja :
does the RC choose any of this stuff
[2019-12-23 20:59:40]
b1tninja :
or can it
[2019-12-23 20:59:52]
b1tninja :
I noticed there are commands to send requests to set certain params in the modem
[2019-12-23 20:59:57]
b1tninja :
not FC
[2019-12-23 21:00:14]
b1tninja :
i guess... more radio stuff, but its duml services and such
[2019-12-23 21:44:52]
originaldobo007 :
Unfortunately that parameter isn't visible in the params for the P4Pv2. Oh well.
[2019-12-27 00:54:48]
ramicaza :
Could someone kindly tell me if anyone's managed to disable NFZ on the mavic mini yet? Blue zones are still on lockdown with no self unlock unfortunately. I was hoping DJI would provide this functionality as a Christmas present but alas :cry: From what I understand you at least have to modify the firmware on the drone itself but not sure what that entails or if you also need to modify the new DJI Fly app.
[2019-12-27 03:23:22]
bin4ry :
nothing public, zones need to be altered on the drone, app is not enough for what you want. in fact if you disable the nfz on the drone you don’t need to modify the app at all.
[2019-12-27 05:55:26]
ramicaza :
Ok thanks! Any idea if pyduml would work with the mini even though the repo doesn't list it as officially supported/tested? I noticed the seed in the pyduml repo in table_crc.py is the same for P3/P4/Mavic so maybe the same for the mini hopefully?? Poking around in the pyduml repo i also saw fireworks.tar but have no fucking clue what the first 2 lines do so idk what will happen if that file actually gets executed on the FC. I just started this drone hacking stuff today so please lmk if I have any stupid misconceptions and what not.
[2019-12-27 05:56:26]
ramicaza :
hoping to poke around the FC if/once i get root and delete the NFZ db like what apparently works on the regular mavic
[2019-12-27 07:46:25]
bin4ry :
yes it still works, i would recommend you to start reading in @mefisto s github. it has all you need also og_service_tool still works on mini too.
however there is none public decrypted firmware image for mini yet, and without one exploit dev is even harder.
so take a look at the repo and learn duml first :wink:
[https://github.com/o-gs/dji-firmware-tools](https://github.com/o-gs/dji-firmware-tools)
[2019-12-27 10:07:10]
ramicaza :
sweet, thanks for the resources man. I don't think I need a decrypted firmware image since I just want to delete the NFZ db for now.
So if I run pyduml with the 'fireworks.tar' file as 'dji_system.bin', it should in theory upload it and execute it from what I've read in the code. I'm just scarred that this will brick my drone by overwriting the existing firmware since it is uploaded using the 'Upgrade mode' DUML command (which I'm assuming overwrites the old firmware). If this were to happen i'd be screwed because you noted that there is no public decrypted firmware I could use to reflash it (unless I could reflash it using the assistant or app but idk if that would be possible with a bricked drone).
[2019-12-27 10:59:33]
bin4ry :
nope
[2019-12-27 11:01:10]
bin4ry :
this fireworks.tar way works because of an vulnerability. it’s an exploit :wink: this vulnerability is long patched and to delete nfz on the drone you need a new one to gain access to it. which again leads to the decrypted firmware image :wink:
[2019-12-27 11:08:02]
ramicaza :
I see, well thanks again. When I have some time maybe I'll go balls deep into this since it's pretty interesting what you guys are up to.
[2019-12-29 13:03:47]
eitan1195 :
Using dumlracer 1.1, cant seem to root a p4p RC(* [1] ttyACM0 : DJI CONTROLLER) - getting Connection timed out (Connection timed out)
at [java.net](http://java.net).PlainSocketImpl.socketConnect(Native Method)
[2019-12-29 13:20:46]
eitan1195 :
any leads?
[2019-12-29 15:43:30]
eitan1195 :
no rndis when connecting the rc...
[2019-12-29 19:54:24]
flymymavic :
make sure net frame work is updated, and use a manual IP in the NDIS adaptor, use CMD > ipconfig to find out what it is, cant remember at the mo
[2019-12-30 07:25:32]
eitan1195 :
running on ubuntu, have no rndis adaptor
[2019-12-30 09:33:04]
eitan1195 :
does not work on windows as well,no ndis adaptor visible
[2019-12-30 11:23:52]
eitan1195 :
anyone?
[2019-12-30 12:18:25]
b1tninja :
yo
[2019-12-30 12:18:50]
b1tninja :
whats your setup like? Have you tried turning off controller unplugging/plugging back in, and turning on controller
[2019-12-30 12:24:28]
eitan1195 :
[yes.it](http://yes.it) does not open rndis(not on mac,windows,or ubuntu - tried all 3).
[2019-12-30 12:34:36]
eitan1195 :
is it even possible to root the phantom 4 rc?
[2019-12-30 15:06:29]
eitan1195 :
on the phantom 4 - i ran dumlracer and it was successful however did not get the root(adb shell returns empty).
[2019-12-30 18:08:58]
b1tninja :
but adb devices shows the device?
[2019-12-31 07:56:56]
eitan1195 :
nope.
[2019-12-31 07:57:09]
eitan1195 :
managed to fix that,but i need root on the rc..
[2019-12-31 07:57:15]
eitan1195 :
it does not work ata all,no rndis
[2020-01-18 19:09:42]
heresmydron :
anyone using comm_og_service_tool on linux? im trying to connect a mini but it briefly appears in `lsusb` and then it just shows up as an usb drive
[2020-01-18 20:43:00]
validat0r :
You've got to send the right duml cmd to let it stick to serial mode .. Or just connect it briefly to dji assistant
[2020-01-19 10:17:14]
heresmydron :
guess ill have to spin up a vm with windows to do that!
[2020-01-20 03:12:57]
b1tninja :
what is it? re booting into windows or whatever, could duml razer or whathave you help
[2020-01-20 12:31:22]
heresmydron :
cant run the dji assistant on linux, so to put the drone on the correct mode, ill have to launch the assistant on a vm first, connect the drone, let assistant do its job and the send the correct duml commands on linux
[2020-01-25 15:35:09]
daviskat :
Use DJI_FC_Patcher to enable Galileo satellites in the GNSS receiver. After I update the firmware with dji assistant2, there are still 25 GPS signals. How do I not need Galileo satellites ，restore the original state?
[2020-01-25 16:10:49]
digdat0 :
This issue shares how to go back stock gps @hkroot1314 <https://github.com/o-gs/DJI_FC_Patcher/issues/4>
[2020-01-25 16:12:32]
digdat0 :
<https://github.com/o-gs/DJI_FC_Patcher/issues/4#issuecomment-417869949>
[2020-01-25 18:11:12]
b1tninja :
anyone know how to boot into other modes? factory etc
[2020-01-29 23:28:26]
originaldobo007 :
Anyone know the parameter to adjust for auto-landing speed?
[2020-01-29 23:45:44]
digdat0 :
smart auto-landing, or low power auto-landing? I'd think these params, depending on situation:
g_config_landing_smart_landing_vel
g_config_landing_auto_landing_vel_L1
g_config_landing_auto_landing_vel_L2
[2020-01-29 23:51:58]
originaldobo007 :
I guess what I’m referring to is the low power auto landing. 
[2020-01-29 23:52:45]
originaldobo007 :
What’s the difference between those 3 params you mentioned?
[2020-01-29 23:53:23]
originaldobo007 :
For instance, if I’m doing a high altitude flight, and I lose reception and it starts auto landing, I really would like it to come down faster. 
[2020-01-29 23:53:48]
originaldobo007 :
Especially if I don’t have a huge amount of battery left
[2020-01-30 00:37:12]
quad808 :
I can help. L1 is the speed for auto landing lower than 20m...you DO NOT want to change that one. Should be -1. L2 is the speed above 20m. This is the one you want to change to -10, or as high as your bird can come down and be stable. Mavics come down easily at -10. P4P can come down at -10 too I think, but the strain on it slowing that fast is pretty great.
[2020-01-30 00:38:25]
quad808 :
If you want to avoid the critical battery turning on auto landing, that is different settings. bat_level_1_action 0 = default LED ONLY Low battery warning - NO CHANGE
bat_level_2_action 0 (2) *0 = LED ONLY, 2 = forced landing
[2020-01-30 00:41:22]
originaldobo007 :
Thank you SO much!!!
[2020-01-30 00:41:28]
quad808 :
If you do a RTH, the L2 setting comes into play...super fun watching it drop like a rock automatically. It will slow to L1 speeds with lots of room to spare when it reaches that height. I know on the Mavics you need to turn off Precision landing otherwise the bird will use precision landing values for L2 and L1. Is this clear as mud??
[2020-01-30 00:43:27]
quad808 :
Test these values first. I would test it with a low charged battery and let it go to critical to make sure it won't do anything for bat_level_2_action if you set it to 0 It will still go into critical battery, but not autoland, and just sit there until it runs out of battery and crash. oopsie
[2020-01-30 00:43:42]
bobdole :
bouncing mavics
[2020-01-30 00:43:50]
bobdole :
they bounce pretty high
[2020-01-30 00:44:03]
originaldobo007 :
Awesome @quad808 I’m going to test the settings this weekend. 
[2020-01-30 00:44:24]
quad808 :
LOL...I bounced one...I was testing -10 and changed from carbon fiber props to stock and it didn't stop in time...
[2020-01-30 00:44:25]
bobdole :
translation StanLee: Awesome, I'm going to bounce the shit out of my mavic this weekend
[2020-01-30 00:44:44]
originaldobo007 :
:joy::joy::joy:
[2020-01-30 00:44:48]
bobdole :
you should just ask quad808 what to put in.. trust me
[2020-01-30 00:45:11]
quad808 :
I was coming down manually, and just messing around....hit full throttle and oopsie...small bounce
[2020-01-30 00:47:01]
originaldobo007 :
Should I worry about the periodic max motor speed warnings I get? Or is that not a big deal?
[2020-01-30 01:10:07]
bobdole :
don't worry... HOPE... hope that the battery runs out before the motors melt off
[2020-01-30 01:15:13]
clauto :
Are you guys using nld or dji assistant 1.12 to modify params?
[2020-01-30 01:57:13]
quad808 :
@originaldobo007 I wouldn't worry, unless you are doing a prolonged full throttle run, those are not good for the motors or battery
[2020-01-30 10:44:34]
cs2000 :
@clauto personal choice. I use NLD because i have it and its simple. But Assistant 2's params are exactly the same, just more messing about with debug mode and what not
[2020-01-30 10:45:29]
clauto :
awesome thanks for the info, was wondering if the assistant 2 1.12 was stable for editing mavic 2, since it doesn’t “officially” support the m2
[2020-01-30 10:45:41]
cs2000 :
If it can see it, should be fine :slightly_smiling_face:
[2020-01-30 10:48:07]
clauto :
I am working on reenabling dev/debug mode on the newest version of assistant, so far i;ve found that they not only commented out the lines of code that allow you to open dev mode, but they removed the files that dev mode loads, so I am readding them from 1.12, and results are promising
[2020-01-30 11:06:41]
validat0r :
Rly? Tried that, too. Got as far as a half working parameter page, but no further.
[2020-01-30 11:07:02]
validat0r :
What makes you think your results are promising?
[2020-01-30 12:24:56]
heresmydron :
@clauto <https://mavicpilots.com/threads/mavic-mini-re-enable-developer-tools-in-dji-assistant-2.77216/>
[2020-01-30 15:46:23]
clauto :
@ilovemynexus4 just seeing your message, I was able to get dev tools page to open and access to the chrome-like dev console and 3 other dji menu items, but I couldnt yet see params.. I have only spent maybe a cpl hours looking into it so far.. looks like others have been trying already which is great to hear.. im pretty late to the party.. just got my bird after xmas but have been a computer engineer for 10 years, and obv love tinkering
[2020-01-30 19:13:59]
digdat0 :
i remember maybe 6-9 months ago there was a guy who mentioned he had a node.js solution for getting into newer versions of assistant with debug. After that, he just .. disappeared and never came back and never heard anything again. I would love to see it happen though!
[2020-02-03 09:29:34]
cs2000 :
I did have a working copy of it, but cant seem to locate it anywhere sadly :confused:
[2020-02-03 12:20:20]
fredmicrowave :
Russian brides are known to surreptitiously delete computer files on people they care about ...
[2020-02-04 16:59:18]
cantrepeat :
@fredmicrowave It's a terrible habit for sure!
[2020-02-08 22:14:52]
luiscb04 :
Where can i find DJI Assistant V1.1.2?
[2020-02-08 22:16:09]
cantrepeat :
<https://mavicpilots.com/threads/dji-assist-2-v-1-1-2.40625/>
[2020-02-08 22:53:42]
dronepilot :
Anyway to remove autolanding from Mavic Mini?
[2020-02-09 07:07:53]
validat0r :
Due to low bat?
[2020-02-09 10:46:17]
dronepilot :
Yes du under 10%
[2020-02-09 14:49:37]
funnel :
I think this is 1.1.2 from their site <https://dl.djicdn.com/downloads/dev/Matrice/DJI_Assistant_2_For_Win_20160304.zip>
[2020-02-09 15:36:21]
trulala69 :
Probably by setting bat_enable_smart_bat_landing_protect to 0
[2020-02-09 18:03:10]
digdat0 :
heres assistant 1.1.2 links:
[2020-02-09 18:03:11]
digdat0 :
**DJI assistant 1.1.2**
PC: <https://www.sekidorc.com/press/DJI_Assistant2_Installer_v1.1.2_20170527.zip>
MAC: <https://www.sekidorc.com/press/DJI_Assistant2_Installer_v1.1.2_20170527.pkg>
[2020-02-09 18:10:11]
digdat0 :
new wiki page with dl links: <https://dji.retroroms.info/howto/download_assistant>
[2020-02-09 18:53:51]
dronepilot :
But would the MM connect to this assistant version?
[2020-02-09 19:10:41]
validat0r :
No
[2020-02-09 19:11:22]
validat0r :
There's no assistant version I know of which connects to the MM in a way that you can alter params
[2020-02-09 21:49:44]
clauto :
For mini you have to use the python scripts
<https://github.com/o-gs/dji-firmware-tools/blob/master/comm_og_service_tool.py>
haven't done it myself yet
[2020-02-13 16:47:00]
dnacho :
I don't think you can change params using the python tools on the mini
[2020-02-13 16:52:56]
clauto :
You sure? I thought that was the only way..
The MMini wm160 was added to og service tools 3 months ago.
[2020-02-13 17:01:10]
mefisto :
You can, just use the switch for alt method. What you can't is break the djis limits. Unless you hack the fw. But that's true for all platforms.
[2020-02-13 19:05:17]
dnacho :
Ohhhh ok ok I thought that it didn't worked with recent drones
[2020-02-13 23:15:07]
digdat0 :
the og service tool works very well. I've created a basic wiki on it as well, to try and add more documentation. <https://dji.retroroms.info/howto/og_service_comm_tool>
[2020-02-14 14:33:24]
kilrah :
It does work, you just have to use the alt method, and make a little change in order to be able to write the single byte params: <https://github.com/o-gs/dji-firmware-tools/issues/139>
[2020-02-14 14:52:47]
b1tninja :
if they are using websoket they are liekly using the offiial dji app to do it?
[2020-02-14 17:12:01]
pingspike :
did anyone ever decode the .DAT files from the Mavic 2 in the end? can't find anything on the wiki about it
[2020-02-14 17:54:18]
dkovar :
We have that ability but it is unfortunately proprietary. I can turn them into JSON for you quite easily. I think DatCon also supports them and will convert to CSV. We almost have a self-service web site for this and I can get that finished if there is an interest.
[2020-02-14 18:19:46]
b1tninja :
whats in the dat files?
[2020-02-14 18:36:35]
pingspike :
[AirData.com](http://AirData.com) might be interested in licensing your proprietary code ;)
[2020-02-14 18:37:20]
pingspike :
a self service site would be great @dkovar but I'd only use it for idle curiosity so don't go out of your way :+1::skin-tone-2:
[2020-02-14 18:42:27]
dkovar :
We're building it anyhow, it is just low priority. This is a good reminder to finish it.
I thought AirData could parse all of the DJI files?
[2020-02-14 18:48:16]
kilrah :
the txts yes, but not the dats afaik
[2020-02-15 21:57:42]
pingspike :
@dkovar no mate, they can't... their website says: Please note: Mavic 2, Mavic Air and Mavic Mini drones DAT files extracted from the aircraft are not supported.
[2020-02-15 21:57:56]
pingspike :
Source: [https://app.airdata.com/dat](https://app.airdata.com/dat)
[2020-02-15 22:03:51]
dkovar :
Huh. Thank you.
[2020-03-08 15:18:37]
eitan1195 :
using dumlracer on mvp RC, getting stuck after "exploiting...first race" - rc shows upgrade and then exists.any clues
[2020-03-08 18:23:11]
b1tninja :
and no adb at that point?
[2020-03-08 20:34:55]
jcase :
@eitan1195 what firmware version
[2020-03-08 20:35:05]
jcase :
dumlracer was patched, dumldore might be better bet
[2020-03-09 07:44:40]
eitan1195 :
never minds - managed to downgrade and get through with this.Thanks :slightly_smiling_face:
[2020-03-11 18:06:50]
dmedvor :
[2020-03-16 22:46:05]
clauto :
has the mini FW ever been hacked?
[2020-03-16 22:47:37]
clauto :
nice! thanks for the examples, you should add this to the doc page
``` 'PH3PRO': 'P3X',
'PH3ADV': 'P3S',
'PH3STD': 'P3C',
'P3XW': 'WM325',
'P4': 'WM330',
'PH4': 'WM330',
'PH4PRO': 'WM331',
'PH4ADV': 'WM332',
'SPARK': 'WM100',
'MAVIC': 'WM220',
'MAVAIR': 'WM230',
'M2P': 'WM240',
'M2Z': 'WM240',
'M2E': 'WM245',
'M2ED': 'WM246',
'MMINI': 'WM160',```
Just so it is easy for first-timers to determine what flag you pass in to the python script
[2020-04-06 06:37:16]
eitan1195 :
is there a pythonic version of the dumldore / a linux alternative?cant seem to find one.
[2020-04-06 06:54:35]
bin4ry :
dumldore is .net IIRC
[2020-04-06 06:58:14]
eitan1195 :
yup,correct.i am wondering if there is a python version
[2020-04-06 06:58:20]
eitan1195 :
or a linux version
[2020-04-06 06:59:40]
eitan1195 :
also - any way to make the adb persistent on mavic pro paltinum rc latest version?
[2020-04-06 07:56:10]
bin4ry :
net runs on linux that is what i meant
[2020-04-06 07:56:40]
bin4ry :
if you want a python version there are many libs like from mefisto to make one yourself :wink:
[2020-04-06 08:33:56]
eitan1195 :
did anyone by chance write it up for python?
[2020-04-06 08:34:01]
eitan1195 :
with mefisto libs
[2020-04-06 08:37:11]
bin4ry :
feel free to do it
[2020-04-06 11:29:30]
eitan1195 :
also - any way to have the adb survive after reboot?
[2020-04-06 16:02:35]
bobdole :
i have a migraine, but need to link this for you @eitan1195 <https://dji.retroroms.info/howto/pyduml#make_adb_persistent>
[2020-04-07 14:14:05]
b1tninja :
hmm, upgrade.tar.gz that isn't a tgz but begins with LOGH?
[2020-04-07 14:15:00]
b1tninja :
histogram/entropy makes me think its encrypted, I'll assume it's something similar to IM*H
[2020-04-07 14:33:28]
mefisto :
Yeah, seen LOGH as well; though never took time to check whether it's just IM*H with magic changed, or a format with more differences.
[2020-04-07 14:48:29]
b1tninja :
looks like maybe smaller header but will have to compare
[2020-04-07 20:01:26]
dkovar :
LOGH is generally encrypted.
[2020-04-08 02:47:57]
b1tninja :
foundu the LOGH in the dji_ftpd, and how it shells out to the TEE stuff for deriving a key with some sort of andom seed
[2020-04-08 02:48:07]
b1tninja :
haven't gotten into the nitty gritty yet
[2020-04-14 06:07:19]
webhdx :
Is there a list of all reverse engineered serial commands? I'd like to check all components for errors or at least ping them for a serial number. I mean WiFi, camera, gimbal, IMU, ESC, sensors, etc.
[2020-04-14 06:38:50]
bin4ry :
you cannot ping all components but even for the ones you want you need to speak duml to the device on the serialport. however for many components you can ask for the serialnumber or other infos. i would suggest that you start reading open source projects like @mefistos „dji-firmware-tools“ (extremely good!) or simpler but also not so mighty implementations like DUMLrub . both are to be found easily on github
[2020-04-14 06:43:12]
webhdx :
Yes, I saw these projects. Is there a reference for those commands? I suppose reading dji-firmware-tools would give me only a basic understanding how the protocol works. Of course I will do that but maybe someone already did so and can help.
[2020-04-14 06:47:26]
webhdx :
anyway I will play with DUMLrub, I actually know Ruby :slightly_smiling_face:
[2020-04-14 06:57:06]
bin4ry :
there is no official documentation, it was all reversed engineered, i don’t think anyone properly documented all knowledge, i don’t think there is another way except reading the code. what was your problem again and what are you trying to achieve?
[2020-04-14 06:58:56]
bin4ry :
another thing you could look at is firmware dumps
[2020-04-14 07:00:05]
bin4ry :
inside the system/bin folder are some sh scripts that invoke dji_mb_ctrl which is an binary to speak via duml to components on the drone itself. so you can maybe find a check function suiting your needs there
[2020-04-14 07:00:23]
bin4ry :
which you can prolly reconstruct and send from pc once you know the command and payload
[2020-04-14 07:01:48]
webhdx :
My Mavic Air does not show up over WiFi and it can't connect to the RC, the fan is not spinning. It happened after crashing down 60 meters from the sky to the concrete :disappointed: As you can see there is a lot of things going on but I can connect it to DJI Assistant so there is a hope. I know there is a hardware fault but since there are no schematics it would be extremelly hard to fix it without any clues.
[2020-04-14 07:02:44]
webhdx :
So what I decided to do is to poll all modules to see if there is anything not responding, this would give me at least an indication where to look on the core board.
[2020-04-14 07:03:21]
webhdx :
Ideally I'd like to access system logs but since Air is not rooted it's prolly not possible :confused:
[2020-04-14 07:12:18]
bin4ry :
well i am not sure anymore, but i think air has no "wifi" module per se. it has the 0801 module which holds wifi in android. so if there is something fucked up you won't see it
[2020-04-14 07:12:25]
bin4ry :
which firwmare version has it ?
[2020-04-14 07:12:35]
bin4ry :
if it is on an old version i can root it remotely for you
[2020-04-14 07:12:36]
webhdx :
I think the newest one .0620
[2020-04-14 07:12:41]
webhdx :
:confused:
[2020-04-14 07:12:42]
bin4ry :
then not
[2020-04-14 07:12:45]
webhdx :
damn
[2020-04-14 07:13:06]
bin4ry :
system.log is encrypted accessable via ftp
[2020-04-14 07:13:12]
bin4ry :
but the key is not public
[2020-04-14 07:13:38]
bin4ry :
you could ask in general if someone is willing to decrypt the log for you
[2020-04-14 07:13:40]
bin4ry :
maybe you are lucky
[2020-04-14 07:16:04]
webhdx :
Okay, I will try to look at the serial communication, maybe I can figure it out to check as much stuff as possible. I know for the fact most of the stuff is working in DJI Assistant (IMU, GPS, sensors etc.)
[2020-04-14 07:17:12]
webhdx :
Not sure about this but maybe it tells you something - in old DJI Assistant version which can go into debug mode it discovers the drone as "Mavic Pro orange30" and then in IMU section it tells me "sys -invalid serial number" but to me it looks like DJI Assistant 1.1.2 is incompatible with Air, it shows up as Mavic Air in newest DJI Assistant
[2020-04-14 07:17:44]
webhdx :
but in the newest version you can't access dashboard/IMU section to read error messages...
[2020-04-14 07:22:23]
bin4ry :
pweh , i have no idea about assistant at all sorry
[2020-04-14 13:30:25]
webhdx :
Can someone check `upgrade_last_kmsg.log` for me? I'm not sure what `<3>[ 0.937921] c0 38 (kworker/u8:1) mmc1: Unknown controller version (5). You may experience problems.` means:
[2020-04-14 13:30:48]
webhdx :
[2020-04-14 13:31:42]
webhdx :
Mavic Air, does not show up over wifi, doesn't connect to the RC, no fan spinning if that helps. Not sure if this is related to the message or not
[2020-04-14 13:33:35]
webhdx :
Firmware .0620 (newest available)
[2020-04-16 10:59:56]
webhdx :
the same CMD ID (in this case `--cmd_id 1`) is used for pinging?
[2020-04-16 11:00:44]
webhdx :
In the example for `comm_mkdupc.py` there is:
> Example of generating a packet to ask Spark camera module for its Sensor ID:
> `./comm_mkdupc.py --receiver_type=Camera --seq_num=65280 --ack_type=ACK_After_Exec --cmd_set=Camera --cmd_id=181`
[2020-04-16 11:01:24]
webhdx :
it's for the Spark but I assume it should be fairly similar on most of DJI drones
[2020-04-16 11:05:15]
webhdx :
I will play with it once I get new camera cable from China. I don't think disconnected camera is preventing WiFi from booting/working correctly tbh. There is a hardware issue somewhere and maybe fan not spinning is somehow related to WiFi problem. I noticed pin 2 (red wire, I assume it's 5V power) is shorted to ground on the fan connector. I need to dig deeper into it once I rule out camera cable issue first.
[2020-04-16 11:06:37]
mefisto :
Any command can be used as ping, if only it produces response.
[2020-04-16 11:08:46]
webhdx :
Yes, you are right. Did anybody start doing command list somewhere?
[2020-04-20 17:55:23]
orvillepopcornwright :
I see there's an option to upload firmware in DDD - how would I pull firmware from my bird tho?
[2020-04-20 22:46:58]
nopexecutor :
Hi. I'm new here, not sure what was already attempted / done in context of of dji rev-eng... Has anyone been successful in utilizing GL300B/C microUSB port?
[2020-04-20 22:48:41]
nopexecutor :
I managed to capture DUMLs from the USB-A, but no success in getting micro running so far... but it looks interesting, I saw there is a command that enables cloning RC messages to endpoint 0x81.... EDIT: got USB micro working :) DUMLs are flowing nicely, 'promiscious mode' command works
[2020-04-20 22:51:06]
nopexecutor :
Other question - did anyone dig deeper into e.g. Ocusync 2.0 from radio POV? I played with captured I/Q samples of it; managed to work-out frame structure, get OFDM demodulated - but not sure yet what data to expect there, what channel coding / mapping techniques were used
[2020-04-21 00:50:43]
b1tninja :
ghowe '''''"
[2020-04-21 13:44:49]
mefisto :
Radio protocols are usually discussed at ~aeroscope-droneid
[2020-04-21 19:39:23]
nopexecutor :
how handy - what is XOR encrypted on USB-A is in plain-text on USB-micro :slightly_smiling_face:
[2020-04-22 08:33:31]
eitan1195 :
anyone has a gdb version that works properly on the mavic pro rc(a generic gdb i have simply crashes when i hit a bp)
[2020-04-22 10:31:15]
b1tninja :
are you using their gdbserver
[2020-04-22 10:31:56]
b1tninja :
one version of the fw I used was android kitkat 4.2.2-r2 based they have prebuilt toolchains and such for that
[2020-04-26 10:54:11]
503496897 :
m2 fw 510 got a dump？
[2020-05-03 19:04:28]
bp- :
Static discharged myself onto the Mavic pro somehow. Seems to still fly, but I get a random compass error. I read I might need to reinitialize the IMU. Never done that before, should be fun to learn something new
[2020-05-04 20:14:48]
papareproductora :
Oh god
[2020-05-04 20:16:06]
papareproductora :
Does anyone knows which glue uses DJI? It is awesome. Thanks!
[2020-05-05 10:12:56]
mingtao :
Kafuter
[2020-05-13 14:57:38]
relaxedbird2020 :
On the pilot app V1.7.2 there is RC_Pro_user.json file in the /res/raw folder that is encrypted, is there any tool that might decrypt that ?
[2020-05-20 07:06:56]
webhdx :
Is the newest Spark firmware rootable? I'm getting a water damaged Spark and would like to root it for easier hardware testing.
[2020-05-20 09:22:31]
validat0r :
Latest should be .1000 and iirc it's rootable
[2020-05-20 09:26:43]
webhdx :
Awesome, I will check it out later :slightly_smiling_face:
[2020-06-29 06:39:00]
eitan1195 :
my mvp rc stopped working - does not live without the usb, and does not beep.when connected to the pc, rndis is not detected.anyone knows how to solve?
[2020-07-07 21:27:30]
ender :
Guys, i am naive in dissecting Firmware. This is a chunk of the latest Autel EVO2 Firmware that unpacked to a file named "Model-C_gt900_b18p19_V1.1.1.26_ModelC_20200617214131.bin"...
It must be the Image Transmission / RC Module.
This is the beginning, i see familiar stuff like uboot / nand / userdata, is this some kind of Android Image?!
[2020-07-07 21:27:45]
ender :
ANy idea what this is & how to decompress?
[2020-07-07 21:28:51]
ender :
(I got this far using "autel_extractor.py" recursively on the regular FW update file)
[2020-07-07 21:30:09]
ender :
I'd like to compare it against the very same file(s) in the previous FW as they changed CE/FCC for Thailand, so i hope to see where / who this was done...
[2020-07-07 21:30:27]
ender :
I know there is much more to it but at least i can satisfy my curiousity :slightly_smiling_face:
[2020-07-07 21:32:23]
dexlarpsn :
It's for sure a Linux based thing, makes non sense that a drone would run Android (even though android is linux too). I don't know the specific question to your answer, but it'll help the people who know the answer to maybe put the file here and not a screenshot :slightly_smiling_face:
[2020-07-07 21:33:09]
ender :
well, the main cpu is running android, i unpacked that before, its a classical android.img
[2020-07-07 21:33:18]
ender :
but this is not for the main cpiu
[2020-07-07 21:33:45]
ender :
Oh well, maybe it is not running android but at least the main rootfs is packed as such :slightly_smiling_face:
[2020-07-07 21:34:23]
ender :
@dexlarpsn i dont want to spam here with multi megabyte files but i put it up the cloud and paste a link here... sec...
[2020-07-07 21:35:30]
dexlarpsn :
Whut.. A drone running a Mobile phone Linux based image, well dear lord that makes non sense but it actually seems reality haha
[2020-07-07 21:36:00]
ender :
This is the original file (26 Mbyte) for download:
<https://1drv.ms/u/s!AitfrG-1s_N6kTPfSB7RqpVpUdgQ?e=mpzNyK>
[2020-07-07 21:36:09]
dexlarpsn :
No worries, I am sorry but I don't have the expertise in it. But I am sure the people who have the expertise they have much more use of a original file than a screenshot :slightly_smiling_face:
[2020-07-07 21:36:14]
dexlarpsn :
<!here> :smile:
[2020-07-07 21:37:07]
ender :
Well, many times people can see the filetype (and thus the way to handle it) from the header only but as it does not hurt i have put up the full file for dload above :slightly_smiling_face:
[2020-07-07 23:35:05]
poopnondji :
Run "binwalk -Me file.bin" on the full firmware package
[2020-07-08 06:13:12]
ender :
Thanks, will try that!
[2020-07-08 22:42:33]
dexlarpsn :
Is anyone here known with devices like a HackRF One? I picked one up recently, but I am stumbling against a problem which I cant seem to have a solution for.
[2020-07-08 23:16:03]
poopnondji :
What’s the problem
[2020-07-08 23:25:32]
dexlarpsn :
I am trying to replicate a replay attack on my doorbell. This doorbell doesn't have a rolling code. However, when I am analyzing the spectrum it shows me multiple peaks from one doorbell push. When I pick the highest peak, and try to record it. It records and picks up the signal, but when I try to replay it nothing happens. I also tried recording the whole 433Mhz spectrum, but still: doorbell is not ringing.
[2020-07-08 23:25:51]
dexlarpsn :
[2020-07-08 23:26:01]
dexlarpsn :
Those are pictures that describe the problem
[2020-07-09 00:27:35]
poopnondji :
What frequency is your door bell operating on?
[2020-07-09 00:34:18]
poopnondji :
Try it gqrx
[2020-07-09 07:14:20]
peteair :
if you have multiple peaks it's probably because your receiver saturates and/or that it's mismatched, iq unbalanced etc...Taking one of the peak does not guarantee that you get the proper signal. Could you send us a raw IQ file so we can examine it ? Also replay a raw 2 MHz IQ file without any filtering will probably create a rather poor signal and that could explain why the doorbell does not ring.........or there's some kind of modification in the packet sent (if not a rolling a code maybe just a packet number increment ?) that makes your doorbell reject the replay packet. Are you 100% sure it's a constant packet each time ?
[2020-07-09 11:14:14]
fredmicrowave :
Real frequency is usually 433.92 mhz
[2020-07-09 11:16:32]
fredmicrowave :
(And modulation, ASK)
[2020-07-15 01:26:28]
oakley75 :
Anyone know what this parameter changes exactly on the MP1? g_cfg_debug_force_flash_led
[2020-07-25 12:23:01]
nz-maori :
Anyone know how to shut off the rear leds of MA2?
[2020-07-25 15:28:05]
oakley75 :
Black electrical tape is what I do lol (bad humor I know)
[2020-07-26 17:10:08]
ender :
@reoak haha i wanted to answer the same but refrained from doing so. THANKS for stepping up :-)
[2020-07-29 18:30:01]
kdsisepic :
Has there been much development with the Mavic air 2 yet?
[2020-07-29 20:54:20]
heresmydron :
it might be the least popular drone of dji. Released during the pandemic, loads of bad publicity about how it wont be legal to fly in the EU in 2021, etc
[2020-07-29 20:54:41]
heresmydron :
i still want one, but im not keeping my hopes up about getting exploits for it
[2020-07-29 20:54:57]
heresmydron :
its a shame because it is a damn fine drone
[2020-07-30 09:59:47]
kdsisepic :
Will the eu regulations affect the uk too? And am I correct in understanding it’s the lack of the ads-b which is the issue?
[2020-07-30 10:57:08]
pingspike :
nobody knows... simply because the CAA can't seem to decide on what regulations they want to actually use, and they also can't stop moving the sodding date for the changes... :man-facepalming::skin-tone-2:
[2020-07-30 11:43:56]
heresmydron :
im not sure but its related to the certifications that will be put in place. all drones released before a certain date will be marked as "legacy" and will have the same regulations. the air 2 might comply with all the regulations and land on a category that requires less requirements, but because its not certified, it will be considered legacy
[2020-07-30 11:44:14]
heresmydron :
ive read somewhere that dji will try to "retro-certify" it
[2020-07-30 13:40:33]
ender :
I hope until they decided my Evo 2 Pro will we old anyways :slightly_smiling_face:
[2020-07-30 14:16:35]
kdsisepic :
Has anyone attempted opening an adb shell?
[2020-07-30 15:26:25]
pingspike :
to the CAA?
[2020-07-30 16:06:32]
kdsisepic :
No on the Mavic air 2
[2020-07-30 16:06:43]
kdsisepic :
But to the caa would be nice
[2020-07-30 16:24:56]
dexlarpsn :
To the caa :rolling_on_the_floor_laughing: lol made me laugh
[2020-08-14 06:29:54]
pratik1 :
HOW TO CALIBRATE MAVIC FCKING MINI GIMBAL. It says DUT device is not recognised. I AM GOING MAD
[2020-09-13 21:40:44]
chipmangini :
Question: A friends son recently came back from serving in Afghanistan and died of a drug overdose. They have his Samsung phone, but no password, or pin to get into it. I got it to boot into recovery, and can "mount system" from there. ADB started daemon when looking for devices, but nothing showed up. Does anyone here have a way for me to possibly get into this phone for pictures, contacts, etc for his parents? I'm not versed in the commands, but have all drivers and ADB set up and working. Any ideas to help them get a little bit more of their son back???? Thanks...
[2020-09-13 21:54:59]
heresmydron :
if its encrypted you might be out of luck. modern androids use the pincode/pattern to wrap the filesystem's passphrase, so in order to mount anything first you need to decrypt it
[2020-09-13 21:55:08]
heresmydron :
silly question, but does it have a sd card?
[2020-09-13 21:55:52]
poopnondji :
What model
[2020-09-13 21:55:54]
heresmydron :
another thing you can try is booting twrp which is more flexible than samsung's stock recovery, but if the bootloader is not unlocked you might no be able to
[2020-09-13 21:56:05]
poopnondji :
Install twrp recovery to get at the files
[2020-09-13 21:57:02]
heresmydron :
first you need to unlock the bootloader and that usually wipes everything (at least on motorolas)
[2020-09-13 22:01:11]
poopnondji :
On samsung you can flash twrp tar file with Odin
[2020-09-14 00:06:36]
dkovar :
You could hire a digital forensics company. They’ll have tools such as XRY or Cellebrite that should be able to do this. Probably safer that doing it yourself. Let me know where you are and I can hook you up if you want.
[2020-09-14 04:20:00]
bin4ry :
@jcase take a look here mate
[2020-09-14 04:21:15]
jcase :
@chipmangini email [jcase@cunninglogic.com](mailto:jcase@cunninglogic.com) I'm on the road for a week but I'm the one you want to talk to
[2020-09-14 04:21:44]
jcase :
I'm a former security engineer at samsung and an Android forensic exploit engineer
[2020-09-14 04:21:55]
jcase :
Thanks binary, night yall
[2020-09-14 04:22:26]
jcase :
O and don't flash twrp or anything to it, keep it off and don't fuck with it at all
[2020-09-14 04:23:37]
jcase :
Not to put anyone down, but ignore everyone without an expertise in this, the slightest mistake results in the loss of data @chipmangini
[2020-09-14 09:51:13]
chipmangini :
@jcase Email sent!
[2020-09-14 09:52:50]
chipmangini :
@heresmydron, @vdub804, @bin4ry, @dkovar Thanks guys, I knew that this was the place to come! :+1::skin-tone-2:
[2020-09-14 17:13:14]
quad808 :
@chipmangini let us know what happens!
[2020-09-14 17:22:45]
chipmangini :
Will do, next week...... :+1::skin-tone-2:
[2020-09-15 09:55:40]
jcase :
Yeah I'm out of town for a week
[2020-09-20 19:55:07]
chipmangini :
@jcase Any time to look at the phone?
[2020-09-20 19:55:35]
jcase :
Sure email me
[2020-09-20 19:59:07]
chipmangini :
@jcase email sent...
[2020-09-23 12:13:02]
kamil.bobrowski :
anyone has some experience with hacking mavic air (1)? when connected via wifi it has 10000 port open, so I guess webmin is running there, but cannot access it / metasploit it
[2020-09-23 12:47:45]
kamil.bobrowski :
ok drone-hacks is doing it via usb
[2020-09-23 12:48:34]
bin4ry :
it is not webmin on this port but a dji service
[2020-09-23 12:48:41]
bin4ry :
no need to metaaploit it
[2020-09-23 12:49:17]
bin4ry :
ma1 should be exploitable by derivates of the already published exploits :wink:
[2020-09-23 12:49:23]
bin4ry :
but only on lower firmwares
[2020-09-23 12:50:18]
kamil.bobrowski :
thanks, is there any use of this dji service for hacking purposes? or should try to do it via usb?
[2020-09-23 12:51:18]
bin4ry :
you should look the usb way
[2020-09-23 12:51:37]
bin4ry :
definetly learn duml and then start hacking
[2020-09-23 12:52:19]
kamil.bobrowski :
sounds good, I see that drone-hacks can unlock fcc on some of the earlier software versions, via usb
[2020-09-23 12:53:32]
bin4ry :
yes, i spawn a adb root shell and push the needed files to the drone
[2020-09-23 12:53:40]
bin4ry :
but my exploit only works on the older versions
[2020-09-23 12:54:16]
kamil.bobrowski :
ah so you are behind drone-hacks or you did it independently?
[2020-09-23 12:54:44]
kamil.bobrowski :
will look into duml
[2020-09-23 12:55:42]
bin4ry :
drone hacks is from me
[2020-09-23 12:55:54]
kamil.bobrowski :
nice :+1:
[2020-09-23 12:56:03]
bin4ry :
to start looking at duml i would suggest dumlrub at github
[2020-09-23 12:56:09]
bin4ry :
it has some nice basic duml
[2020-09-23 12:56:14]
bin4ry :
thx
[2020-09-23 12:56:57]
bin4ry :
and if you understand the basic see mefistos ogs-firmware-tools in python
[2020-09-23 12:57:04]
kamil.bobrowski :
thanks, will start there
[2020-09-23 12:57:05]
bin4ry :
it is more advanced
[2020-09-23 12:57:14]
kamil.bobrowski :
sounds good
[2020-09-23 12:57:25]
bin4ry :
enjoy :wink:
[2020-09-23 17:05:35]
kamil.bobrowski :
ok this may be more difficult, I'm on V01.00.0620 so I guess anti-rollback protection will kick in when trying to downgrade? Last supported version for rooting in drone-hacks is V01.00.0200. Was looking into exploits, original red herring with busybox bug is patched I guess, DUMLRacer requires FTP port open, maybe TarAndFeather, but if it was not patched yet then I guess drone-hacks or DUMLdore would offer adb shell. 0 day needed?
[2020-09-25 06:16:23]
ihacked.langley :
Hey everyone, I used dank drone downloader to download the new smart controller firmware which features support for the mavic Air 2, how do I use this resulting file to update my smart controller without access to a computer? I'm going to be away from internet for a little while otherwise I would just use the built-in OTA update facility
[2020-09-25 15:52:55]
mdshameel96 :
hi, may I know if nfz.db is encrypted?
[2020-09-25 15:54:10]
jcase :
@mdshameel96 iirc it depends on the device
[2020-09-25 15:54:44]
jcase :
iirc at least one decrypts to memory
[2020-09-26 00:07:13]
kamil.bobrowski :
I'm trying to dig into mavic air firmware, but cannot un-sign it using @mefisto tools. `reserved2` and `reserved3` are non-zero, get head signature verification failed. Forcing un-signing results in some bin file. Played around with older mavic (pro, not air) firmware and un-signing works fine, results in jar which I can dig into. I guess I will try to extract proper way to un-sign it from Assistant if it verifies the header, any hints if this is the way are very welcome :slightly_smiling_face:
[2020-09-26 00:12:17]
jcase :
did keys for mavic air get dropped? i dont think they did
[2020-09-26 00:12:31]
jcase :
you can just unpack it on the bird itself
[2020-09-26 00:29:50]
kamil.bobrowski :
Thanks @jcase, but how to unpack it on the bird? Unfortunately don't have adb access since I'm on the latest firmware and don't have a working exploit. Not sure if it's possible at the moment to downgrade, but does not seem so
[2020-09-26 00:31:05]
jcase :
then you are a bit stuck
[2020-09-26 00:37:34]
kamil.bobrowski :
Yep, wonder if there is a way without gutting the bird
[2020-09-26 00:38:11]
jcase :
not without keys
[2020-09-26 00:52:22]
kamil.bobrowski :
Would probably be possible to extend og firmware tools to mavic air by reversing older firmware, I guess tar and feather used to work also on mavic air. Sadly don't know anyone with non-upgraded air, in case someone is interested in this let me know
[2020-09-26 00:54:16]
jcase :
you would need to exploit trust zone or hte cryptocell
[2020-09-26 00:54:34]
jcase :
cant remember which, getting birds confused
[2020-09-26 00:56:59]
kamil.bobrowski :
Right... Just curious, is this how the other keys were leaked or they kept it in less safe place?
[2020-09-26 01:01:56]
jcase :
less safe place
[2020-09-26 01:02:56]
kamil.bobrowski :
But anyway, I'm more interested in the decrypted firmware itself, if there is some exploit which does not require signed payload then it'd be a bonus but just curious to analyze code itself
[2020-09-26 01:04:20]
kamil.bobrowski :
Perhaps would just look into something with keys available
[2020-09-26 01:05:10]
kamil.bobrowski :
Though so, too bad since it will be much more difficult to exploit future birds
[2020-09-26 01:07:01]
jcase :
mavic pro is probably latest
[2020-09-26 01:10:05]
kamil.bobrowski :
Thanks, will have a look
[2020-10-07 13:37:13]
sanderjacob13 :
Anyone know how to calibrate Mavic 2 pro gimbal after motor replacement
[2020-10-08 22:04:43]
kketija :
<https://github.com/o-gs/dji-firmware-tools>
[2020-10-13 17:34:30]
fun.day.cool :
<https://www.youtube.com/watch?v=hn04fyifGqo>
[2020-10-14 02:40:24]
sanderjacob13 :
Does it really work??
[2020-10-15 11:20:17]
neophyte.bm :
Hey guys, I am trying to mod my APK but the app keeps telling me that it cant find /tools/patch
Do you have any solution?
Do know if we can mod the newst app version of go 4?
[2020-10-15 12:03:06]
oakley75 :
There are 2 files to run. One is the tools.
[2020-10-15 13:31:05]
pingspike :
@neophyte.bm v4.1.22 is the highest I think? :thinking_face:
[2020-10-23 08:09:51]
techskilled :
Hi all. I saw advice on a post at github regarding slack and how you guys might be able to help. I ran the dji calibration tool commands from github. It is calibrated but with an error. That's not so important but the problem is there are still gimbal calibration errors in the app. Can someone advise, please?
-Mavic Mini
[2020-11-05 15:53:54]
maorv :
Do we have the new crc table for descrambling dji go 4.3 log files?
[2020-11-06 03:48:26]
jcase :
@maorv which log, iirc its not scrabled but actually encrypted, i wrote a decrypter at one point
[2020-11-06 16:25:59]
maorv :
@jcase I’m using code based on the one in this project - <http://djilogs.live555.com/> however from my understanding, logs created by app version 4.13 use a different key table for scrambling, or perhaps use a completely different method
[2020-11-06 16:26:17]
jcase :
Which logs
[2020-11-09 07:49:41]
maorv :
@jcase the txt logs extracted from their app
[2020-11-24 21:52:40]
yzayn.yz :
hi, any news on removing the error messages after gimbal replacement on mavic MINI?
[2020-12-13 09:16:28]
t.a.shanker :
Hi anyone can help me the mounting path for mavic mini controller on mac? I couldnot find
```/dev/ttyACM0 ```
and i tried
```/dev/tty.usbmodem142201 ```
by tracking extra mounting when I connect to mavic mini controller but I am not able to ftp into the controller after following command
```./comm_serialtalk.py /dev/tty.usbmodem142201 --cmd_set=0 --cmd_id=1 --sender=1001 --receiver_type=31```
One question is can I connect to ftp of mavic mini controller when using connection via USB port or need ethernet cable for ftp.
If i can use via USB can help me understand what I am missing here. Thanks
[2020-12-13 09:34:49]
bin4ry :
IIRC the controller had no ftp
[2020-12-15 01:37:31]
linxzhan9 :
Hi everyone! I want to learn about DJI's communication architecture and other techniques inside, so I have to dive into its firmwares (downloaded from <http://dankdronedownloader.co.uk/DDD2/app/>). Which side (Controller or Aircraft) and which firmware should I first look into? And are there any related blogs or documents? Any suggestions are helpful, thanks
[2020-12-15 05:41:15]
william.markezana :
Hi @linxzhan9, are you targeting any particular aircraft to get started?
[2020-12-15 10:46:24]
linxzhan9 :
Hi @william.markezana. Phantom4 Pro V2.0 and Mavic Air 2. I have already torn down the P4P completely and also downloaded some firmwares from that website but don't know where to start:thinking_face:. Right now I intend to extract the firmware of MCU (LPC1549) in the controller.
[2020-12-15 13:44:16]
quentari1422 :
Hi. quite new here. you can try:
[2020-12-15 13:44:31]
quentari1422 :
```ls /dev/{tty,cu}.*```
[2020-12-15 13:44:57]
quentari1422 :
I am also trying to connect to the RC via usb instead of ethernet but so far no chance
[2020-12-20 21:54:55]
validat0r :
how to access the SD card on the Mavic Pro system?
[2020-12-20 21:55:04]
validat0r :
cant see it mounted :confused:
[2020-12-21 11:01:44]
mefisto :
The FC one, or the camera one?
[2020-12-21 11:07:29]
validat0r :
there are two? i'm speaking of the one accessible from the outside of the pro platinum.
[2020-12-21 11:10:29]
validat0r :
i'm trying to save flight logs on the ac and keep them from being erased. on my spark I had a script which copies them to the SD card, but on MP i'm not sure what device to use
[2020-12-21 11:14:02]
validat0r :
for christs sake .. there is a 4GB sd card buried deep inside?
[2020-12-21 11:25:17]
mefisto :
> there is a 4GB sd card buried deep inside?
Yes, it stores the DAT flight logs. But I think in Platinium the card is not populated and internal storage of one of chips is used instead? not sure here.
[2020-12-21 11:38:12]
validat0r :
thx. i'm sure you have some great close-ups of mavic pro boards .. i struggle to find the url
[2020-12-21 11:42:06]
validat0r :
would an added sd card be usable if there was none?
[2020-12-21 12:04:19]
mefisto :
> some great close-ups of mavic pro boards .. i struggle to find the url
<https://github.com/o-gs/dji-firmware-tools/wiki>
> would an added sd card be usable if there was none?
I remember someone describing some experiments with that. Can't remember details, but I think the drone started using that card.
[2020-12-21 19:47:13]
validat0r :
ok. I put a sd card in, but it doesnt seem to be recognized. tried several.
[2020-12-21 19:47:37]
validat0r :
`comip-mmc comip-mmc.1: 1 slots initialized`
comip-mmc comip-mmc.0: Using internal DMA controller.
comip-mmc comip-mmc.0: Version ID is 260a
comip-mmc comip-mmc.0: DW MMC controller at irq 66, 32 bit host data width, 256 deep fifo
comip-mmc comip-mmc.0: sdcard detect init failed
[2020-12-25 22:15:37]
robert.brown.dd :
o/ Is there a wiki that list the descriptions of various parameters?
[2020-12-26 20:41:27]
heresmydron :
youll find some references on github
[2020-12-26 20:41:33]
heresmydron :
but tehres no complete list
[2020-12-27 17:12:37]
digdat0 :
[https://dji.retroroms.info/howto/parameterhacks](https://dji.retroroms.info/howto/parameterhacks)
Check that out
[2020-12-29 17:29:18]
robert.brown.dd :
Thank you
[2021-01-05 18:07:31]
flyingkite :
Does boost mode on the mavic mini have any benefits if flying in the US or is this more for those with CE or lower transmission? Thanks and Happy 2021 to the community.
[2021-02-09 06:55:13]
nublish101 :
Well. I. Dont no. On the mini but usualy boost means a wattage boost over standard fcc wattage hense most drone have an fcc+boost mod
[2021-03-15 21:08:50]
tedbrosky10 :
Hi im looking to modify the DJI m100 flight controller parameter list but i couldn't find the param list on
<https://dji.retroroms.info/howto/m100_params>
but when i do the module extraction method the list that appears is kind of similar to the phantom 3 306 flight controller module
my question is if i do the same changes that i did to the phantom 3 will work fine or there is more to this?
[2021-03-16 02:42:53]
digdat0 :
Same changes as p3 or inspire 1 maybe some slight variations on terminology
[2021-03-31 10:35:59]
meignanmaxime :
Hi everyone !
I am trying to extract the filesystem from the remote controller that comes with the WM245 (Mavic 2 Enterprise). I saw that someone (@jcase?) did it for the Mavic 2 drone and its remote (<http://dji.retroroms.info/howto/mavic_2_firmware>) .
I am kinda new to hardware hacking, though I managed to dump one SPI flash on the board (the only storage chip I could identify), but the size of the chip (32MB) seems a bit too small compared to the size of the filesystem published on the retromrooms website (>32MB compressed, >60MB uncompressed).
Moreover, the entropy graph of the chip's dump indicates that most of it seems either encrypted or compressed, and that there is around 7MB of "real" information (to be compared with the 32MB of the compressed public dump)
Would someone be willing to give me some pointers on the methodology to follow to find the filesystem and extract it ?
Thanks in advance !
[2021-03-31 14:14:14]
kyokushin :
Hi guys, can anyone remind me how to connect FTP to Spark? I completely forgot - i have done it two years ago last time.
[2021-03-31 14:15:50]
kyokushin :
To the bird, not RC
[2021-03-31 14:22:39]
kyokushin :
Last time i have downloaded some plugin to total commander, then got access to ftp
[2021-03-31 14:23:02]
kyokushin :
@ilovemynexus4 @bin4ry
[2021-03-31 14:23:15]
kyokushin :
@nocommie
[2021-03-31 14:24:01]
djibot.5150 :
Is commander a web browser?
[2021-03-31 14:24:53]
djibot.5150 :
There was some plugin I used a while ago I think it was with that superpatcher program
[2021-03-31 14:26:00]
kyokushin :
total commander is file manager
[2021-03-31 14:26:25]
kyokushin :
i used it for FTP connection, but i completely forgot how i get access to spark, for wifi, or usb, and what i did next
[2021-03-31 14:28:46]
kyokushin :
its allow to ftp access like filezilla etc, it have just built-in ftp client
[2021-03-31 14:29:57]
kyokushin :
in different way, without linux
[2021-03-31 14:31:18]
djibot.5150 :
A Few things popped up on google
[2021-03-31 14:33:52]
djibot.5150 :
Oh that was spark server sorry
[2021-03-31 14:33:56]
kyokushin :
i found nothing similar to what i did
[2021-03-31 14:34:10]
kyokushin :
it was very simple i remember
[2021-03-31 14:34:16]
kyokushin :
ehhhh
[2021-03-31 14:35:10]
kyokushin :
it was adb
[2021-03-31 14:35:53]
djibot.5150 :
I'm looking, there was a way in a mod thing I'm trying to find it again
[2021-03-31 14:37:26]
kyokushin :
now i cant remember how i got access for adb to this spark
[2021-03-31 14:39:10]
djibot.5150 :
I think that's what I'm thinking of sorry, I think it was an adb plugin for a web browser.
[2021-03-31 14:40:42]
djibot.5150 :
[https://forum.phantomhelp.com/t/how-to-delete-internal-flight-logs-from-the-spark/236](https://forum.phantomhelp.com/t/how-to-delete-internal-flight-logs-from-the-spark/236). Like that?
[2021-03-31 14:44:56]
kyokushin :
thanx, i know now - i have got a enlightnment. I used not ftp, but adb and now i am trying to connect
[2021-03-31 14:46:32]
djibot.5150 :
It's been so long since I had one I forgot what I did on it. I think it was patch and along side that I had instructions for another way to connect besides using DOS adb
[2021-03-31 14:46:55]
kyokushin :
"i am in: :smile:
[2021-03-31 14:47:32]
djibot.5150 :
Cool, glad you got it
[2021-03-31 14:47:40]
kyokushin :
thanx for help\
[2021-04-01 02:23:23]
joshthesoftwaredev :
Hi, can someone link me to a breakdown on how the mavic pro 1 communicates to the AC (RC mode). Mainly interested in authentication.
[2021-04-01 08:48:30]
cloudwerx :
[https://github.com/o-gs/dji-firmware-tools](https://github.com/o-gs/dji-firmware-tools) this will bring you up to speed on a lot. [https://dji.retroroms.info/howto/start](https://dji.retroroms.info/howto/start) has everything else. Search GitHub for other tools. The MP (and most DJI drones) AC/RC communicates using a language called DUML, there are many tools that let you spy on this communication, capture and parse it, craft and send your own packets. You can use PyDUML or DUMLrub to make your own tools and roll your own FW/FC with all your favorite tweaks. Get Root/ADB with DUMLdore or Ubersploit, learn Kali Linux and Python. Modify and build your own custom version of the Android GO app using the APK tools. A whole lot to learn, I have been having more fun learning things and trying to make my own exploits than flying my drones lately, have my MPP pimped the hell out. Working on my M2P/Z atm :+1:
[2021-04-01 15:58:38]
amqassim :
Hi guys , I am wondering if micro SD card can be counted as an entry point to the dji mini 2 drone. If so is there any specific threats related to this point. thanks in advance
[2021-04-02 14:31:40]
b1tninja :
Iirc there is a file it looks for on boot to see if it should update fw. I know this is spoon feeding chan, but I'm out of practice
[2021-04-14 06:51:49]
eitan1195 :
do the mavic mini / mavic mini 2 run android?
[2021-04-14 10:57:10]
mefisto :
@eitan1195 Use DDD to get firmware, then use `tar` and `dji_imah_fwsig.py` to extract its content (need to use "--force-continue" flag atm). See what files you got.
If there's a ZIP file, then related module runs Android.
[2021-04-14 13:21:40]
tmbinc :
I have a Mini1 that fails IMU calibration ~20%, retaining errors 30055 30056 30084. I'm less interested in a fix but more in how to systematically debug this issue. Is there a DUML command or so to read out raw IMU values to check if they are good? Is there any information on what actually fails when IMU calibration fails?
[2021-04-14 14:00:21]
mefisto :
Try searching through `dji-dumlv1-flyc.lua`. for example "Flight Controller - OSD General Data - 0x43" provides IMU error code.
Not sure what those 30055 30056 30084 are - I'd check if they are defined within app, or if they come from a packet from FC. If they come from FC, then checking FC code may allow to figure out what's wrong.
Also, FC logs some text messages in DUML which the app ignores (not sure if it even receives them). These can be found in DAT log; though in Ph3 I was reading them in real time from PC, by the same UART interface which Dji Assistant uses (usb connector on the drone).
[2021-04-14 15:05:06]
onedroidgame :
I've hit a wall.... i cant get past the "app not installed message" when trying to install mod-45.apk . has anyone else encountered the same issue?
[2021-04-14 16:49:06]
kilrah :
did you uninstall any original version you might have before installing modded one?
[2021-04-15 02:11:22]
onedroidgame :
I don't have any versions on this phone..
[2021-04-15 02:12:03]
onedroidgame :
Tried on s7 and note 9. Same thing.
[2021-04-15 04:05:50]
joshthesoftwaredev :
Are you rooted
[2021-04-15 04:06:26]
joshthesoftwaredev :
Me personally i have it all installed and stuff, went to add the drone to wifi, no dice shows as disconnected despite me being on the hotspot
[2021-04-15 04:22:46]
bin4ry :
what is mod45? in this slack we never shared premodded apps. i have made the process opensource for a reason. it is a bad idea to trust an unknown source of a modded app. go to the github repo and build your own apk, then you know what’s inside and you know that you can trust it!
[2021-04-15 04:49:15]
joshthesoftwaredev :
Mod45 is the default output name of your patcher lol
[2021-04-15 04:50:02]
joshthesoftwaredev :
Speaking of which, any clue why it might say disconnected after connecting ym mavic pro
[2021-04-15 05:14:08]
bin4ry :
really? lol, ok sorry then! :smile: oh wow, i must have forgotten that it 45 iterations! crazy. Anyway, if it is self build then it should be checked if the APK is a valid APK.
[2021-04-15 05:14:31]
bin4ry :
the installation error can point to a parsing error, which is mostly the case if the APK is either not signed or not build correctly
[2021-04-15 05:15:02]
bin4ry :
which can be because of missing tools (errors should show in the build process), or too low diskspace, which will lead to corrupted files
[2021-04-15 05:16:28]
bin4ry :
what helps to pinpoint the issue to take a look at the output in build AND if that not helps to look at adb logcat during install
[2021-04-15 05:16:34]
bin4ry :
it will show the specific error
[2021-04-15 15:42:08]
joshthesoftwaredev :
Mine installs fine, its when scanning the qr code it still shows disconnected
[2021-04-15 19:51:07]
hamza.pebo :
I've downloaded the firmware for mini 2 from Dank Drone Downloader. With some modifications, I was able to decrypt the firmware with dji_imah_fwsig.py. The output from the decryption was a weird file that I don't know what to do with. The 'file' command says that it is a "Maple help database". And Binwalk says:
```6337 0x18C1 mcrypt 2.2 encrypted data, algorithm: blowfish-448, mode: CBC, keymode: 8bit
231298 0x38782 Microsoft executable, MS-DOS```
Can somebody make sense of this? How do I extract the rootfs from this weird file?
[2021-04-15 20:48:58]
tmbinc :
Have you decompressed it?
[2021-04-15 20:49:16]
tmbinc :
```import lz4.frame
import sys
d = open(sys.argv[1], "rb").read()
open(sys.argv[2], "wb").write(lz4.frame.decompress(d))```
[2021-04-17 23:17:01]
onedroidgame :
No not rooted. Should I be
[2021-04-19 09:16:00]
jdalnert :
I bought a used Mavic Air that was apparently stuck blinking red/green/yellow and can't be accessed by any apps such as assistant 2 for mavic or any phone apps. Is there any way to reboot/reset the drone or maybe use some Java command to force it out of its loop?
[2021-04-19 18:07:53]
joshthesoftwaredev :
its not supposed to blink?
[2021-04-19 18:07:57]
joshthesoftwaredev :
shit
[2021-04-19 18:09:25]
validat0r :
yours blinking, too?
[2021-04-19 18:10:09]
joshthesoftwaredev :
my mavic yeah
[2021-04-19 20:12:12]
kilrah :
Depends what blink pattern...
[2021-04-19 21:08:19]
mefisto :
It's spring. It clearly wants to mate.
[2021-04-19 21:41:00]
mel69hash :
Oh yes as it LGBT approved
[2021-04-22 10:19:54]
daniel768 :
@jdalnert if its dji mini 1 you need the dji fly app, available on dji homepage, not via store
[2021-04-25 16:49:52]
tmbinc :
Is there a (ideally hackable) PC app that can be used to fly MM1 or MM2, instead of a phone?
[2021-04-25 16:58:06]
atlantic :
sdk is only for android on ARM and iOS.
[2021-04-26 06:58:57]
tmbinc :
Is there a good overview of what messages are required to fly? It should fly fine without the app, right?
[2021-04-26 06:59:06]
tmbinc :
(Once it's in the air)
[2021-04-26 11:45:05]
atlantic :
oh, i was not right, there is a Windows SDK. But is not for Mavic Mini and Mini 2.
[2021-04-26 11:46:48]
atlantic :
there are API documents on their website. But that is an API, that is not the bytes that go over the air.
[2021-04-26 13:32:50]
oakley75 :
@tmbinc As long as you are activated and all is good, you do not need any device at all. You can fly 100% completely without. Blind of course.
[2021-04-28 17:21:11]
slater.andrewp :
My DJI Smart Controller lost all image/video transmission feed from my Mavic 2 Zoom after the latest SC firmware update. I'm not seeing any downgrade options in Assistant 2 when I plug in the SC. I've found a .bin of a previous SC firmware version on DDD. How can I flash the old firmware to the SC to troubleshoot?
[2021-04-28 18:37:01]
mingtao :
Are you tried dji assistants?
[2021-04-29 14:49:55]
slater.andrewp :
Yes- Already tried to refreshed the firmware in DJI Assistant 2. Didn't help.
[2021-04-29 18:18:18]
dronepilot :
I’m running the latest firmware on my SC everything 100% normal.
Until last firmware i could downgrade the firmware using a bin file but now the value has changed and can’t downgrade any more.
[2021-05-01 02:54:48]
bajalal :
Hi, do anyone know how I can fix my stubborn gimbal yaw on phantom 4 pro? It is pointing all the way to right and the gimbal esc board gets really hot. These are the things I have tried so far but still same problem:
Changed ribbon cable (authentic).
Changed gimbal esc board.
Changed yaw motor (with old motor housing).
Tried to calibrate from Dji go 4 app.
Tried to calibrate from python with cmd (but constantly getting an no response error while gimbal does nothing).
After all of these things the issue remains same.
[2021-05-02 15:30:22]
oakley75 :
How interesting, never heard of that
[2021-05-06 21:59:50]
monkeyman :
how to downgrade the mavic air 2 /mm2 remote?
[2021-05-07 09:52:43]
kilrah :
tried assistant?
[2021-05-07 16:21:47]
monkeyman :
not regonize, same with other tools
[2021-05-07 16:43:32]
oakley75 :
Try connecting it different ways/orders. Also check device manager if on windows
[2021-05-07 17:55:46]
wocpsu :
I think this is a similar to the issue I'm having with my phantom 4. Does your drone show up with an ip address when you type ipcong /all in the windows command prompt? @slater.andrewp
[2021-05-07 17:58:10]
wocpsu :
Look at this post (<https://forum.dji.com/forum.php?mod=viewthread&tid=106055&mobile=2>). It seems the drone can't receive FW updates anymore due to the FTP daemon not running and the drone being stuck in recovery. Does anyone know how he ran the commands in post 7 to fix this?
[2021-05-07 19:19:37]
wocpsu :
Thanks @mefisto I'll see if I can get that to work for resetting the drone!
[2021-05-07 20:52:10]
thomas.christof :
@mefisto looks like all nosecneo apks on retroroms are offline. Are there any mirrors availabe?
[2021-05-07 21:31:06]
mefisto :
!apk
[2021-05-08 16:53:26]
tmbinc :
Does someone know how Waypoints are handled on DUML level? I'm trying to assess how much of the mission planning code is still present on the MM1/MM2, and whether it's feasible to write a custom flight tool that uploads them.
[2021-05-08 18:03:01]
mefisto :
I would assume - all of it is there. I highly doubt that was cut on any drone.
Anyway, the most FC symbols we probably have in this:
wm220_0306_v03.02.35.05_20170525.pro.fw_0306.decrypted.idc
So it may be worth looking at that firmware; the mission_* functions are what you're looking for:
[2021-05-08 18:08:10]
mefisto :
If you look at the screenshots, the function visible is referenced as action callback in an array of DUML handlers.
(in newer drones the array may no longer be static, DJI tends to lean towards registering handlers during initialization and filling a dynamic list)
[2021-05-08 18:15:30]
oakley75 :
Now that is a noble mission. Best of luck for sure :)
[2021-05-08 18:20:42]
mefisto :
Hm, maybe you actually don't have to get into FC code to allow waypoints? It's likely to work if you just modify DJI Mobile SDK to treat it as available.
[2021-05-08 19:13:22]
validat0r :
That'd be awesome
[2021-05-09 18:20:17]
hamza.pebo :
I have some questions about how DJI hides sensitive data.
1. Where are the authorization and encryption keys for firmware upgrade stored? How are these keys kept secret, and where do you find them?
2. The mm2 uses Ocusync, which uses FHSS radio communication. FHSS has a secret hopping pattern that the receiver and transmitter use. Has anyone found this secret hopping code in the firmware or somewhere?
Any information is much appreciated.
[2021-05-09 18:35:37]
oakley75 :
If you end up wanting to tear into a litchi app, I have virtually all apks (self extracted)
[2021-05-09 19:48:11]
mefisto :
1. The keys are in CryptoCells within ARM TrustZone
2. Ocusync keeps all radio patterns and parameters according to LTE standard
[2021-05-10 10:15:33]
nopexecutor :
Point 2 is more or less true for DL signal, while FHSS is employed in UL. MAC layer and encryption are anyway OcuSync specific, not like in LTE
[2021-05-10 11:09:19]
hamza.pebo :
I see, thank you so much.
[2021-05-12 15:30:39]
thomas.christof :
are any details known about the camera's live feed codec? H264 seems to be a good candidate.
[2021-05-12 19:17:09]
chipmangini :
Maybe: <https://dji-rev.slack.com/archives/C5ZR0QXUG/p1620821821332300?thread_ts=1620733734.305400&cid=C5ZR0QXUG>
[2021-05-12 19:43:49]
gabriel.gonzalez.garc :
One question I have is, how were the keys included in the firmware-tools extracted?
[2021-05-12 19:45:46]
gabriel.gonzalez.garc :
One question about OcuSync encryption. How often is the key rotated? Is there any information about when the key generated and similiar stuff?
[2021-05-12 20:25:55]
mefisto :
They were extracted using in-depth knowledge of the people who were extracting them. That required knowledge of things like race conditions, specific behavior of integers, buffer overflows, rarely used operations within related protocols, analysis of chunks of DJI software exposed in other products and releases, informed fuzzying, and many other subjects.
Each key is a separate story. But the researchers are not obligated to publish their stories. One story you can find here:
<http://www.digitalmunition.com/WhyIWalkedFrom3k.pdf>
If you're interested in doing such things, you may start by watching binary exploitation and CTF-related videos here:
<https://www.youtube.com/c/LiveOverflowCTF/playlists>
[2021-05-12 22:55:01]
nopexecutor :
Typically it's done at drone reset / first connection establishment after drone restart. AES is used for encryption, but the key schedule is not very strong
[2021-05-13 08:25:30]
gabriel.gonzalez.garc :
Thank you!
[2021-05-13 10:55:32]
gabriel.gonzalez.garc :
I am trying to decrypt Mavic Pro 2 FW packages but with the different package version I have downloaded, non of them seems to decrypt properly using the keys on dji_imah_fwsig.py tool. Is there any info showing what keys decrypt what drone model/version?
[2021-05-13 18:30:13]
johnriscure1 :
Hi, I would like to help contribute my time/knowledge in recovering keys for DJI drones to aid in reverse engineering. I saw a PDF image [here](https://github.com/o-gs/dji-firmware-tools/issues/190#issuecomment-762877522) of a description, can someone share this document with me?
[2021-05-13 18:37:31]
mefisto :
That's a publicly available document. It seem to be a writeup by a student or something. Better than nothing I guess - we have such documentation only in form of code.
[2021-05-13 18:42:59]
johnriscure1 :
I've read the tools code. I guess I just dont fully understand how the system works and where these keys are stored on the device/provisioned, accessed, or derived. Or how people have dumped them before, using fault injection, side channel, or probably logical attacks I assume?
[2021-05-13 18:48:06]
johnriscure1 :
I will read the public document.
[2021-05-13 18:53:02]
mefisto :
I just browsed it, it's not a bad start. It confuses the drones a bit - says TZ/TEE is used, but then copy-pastes a script to read the key directly from memory (which worked only before TZ was introduced).
But we don't have anything better anyway.
[2021-05-13 19:01:45]
johnriscure1 :
Is the uboot source shared? I think glitching uboot and then dumping keys is probably a quick/easy way without needing to find/chain/exploit bugs.
[2021-05-13 19:02:29]
johnriscure1 :
I found it.
[2021-05-13 21:17:52]
wilsondonakanty07 :
@johnriscure1 I hope you must have found that document..
If not, let me know..
Ill share it with you..
[2021-05-14 12:06:13]
tmbinc :
<http://kth.diva-portal.org/smash/get/diva2:1463784/FULLTEXT01.pdf> fwiw
[2021-05-14 12:06:28]
tmbinc :
(hint: just type in a few sentences into google)
[2021-05-14 13:20:34]
wilsondonakanty07 :
Seems like the DJI Firmware tools- scripts have been updated and working for the MM2.
using the command: "_*python3 dji_imah_fwsig.py -vv -u -i xxx.sig*_" extracted the .sig file to .bin file.
Need some !!help!! to go ahead with editing/reading the .bin file.
Anyone working on the MM2 firmwares???
[2021-05-14 16:13:03]
johnriscure1 :
So is the FTP written by DJI? How is this used in the system?
[2021-05-14 16:20:48]
johnriscure1 :
Doesnt seem like it
[2021-05-14 17:10:20]
johnriscure1 :
So the dji_blackbox ends up using libduml_util.so to write the DAT files, on the air 2 these are scrambled/crypted, right? but on the mini they are not? I see the task in IDA that handles this via a semaphore on the mini
[2021-05-14 17:26:27]
johnriscure1 :
Hmm I hope that S1 chip is not used as a root of trust on the air 2 for DAT file encryption, would much rather hack the H6 SoC w trustzone
[2021-05-14 17:30:06]
johnriscure1 :
Im assuming it is used for secure RF communication only
[2021-05-16 14:26:00]
fredmicrowave :
Could someone give me a hint on how to remove PF flag on BQ30Z55 with original BQ software ? Writing values doens´t seem to be permanent.
If i had one good battery I could compare values, but I don´t have one, and I had no success trying to find a video showing those values. Battery unseal /full access is successful.
[2021-05-16 16:48:57]
fredmicrowave :
Never mind I got it, 00 on 0029 and 0024.
[2021-05-16 19:02:19]
olli_dxd :
Why use the BQ software when the tool mefisto made is better for that?
[2021-05-16 21:42:06]
fredmicrowave :
Mefisto's solution is great, but I have a EV2300 /400 cheap clone, I am not familiar with Python, and I wanted to try and learn that solution. It may help getting access to other batteries...
[2021-05-16 22:04:28]
chipmangini :
I have a Phantom 4 Pro High Capacity battery that has only 7 charges on it, and it errors out with "Cell Broken", but seems to fly fine. I haven't tried to go far, just using it for ground setup & testing. I bought it new a couple of years ago, and it's always been taken care of, and it's not swollen. Any ideas on maybe getting this back to normal?
[2021-05-16 22:33:16]
olli_dxd :
What you need to do is charge all the cells up to as close to each other as you can. This will require dissaembly to get access to the cell pads on the board. Also, how bad is the voltage difference between cells? I’ve revived a P4 high cap pack from a 0V dead cell
[2021-05-17 00:37:36]
fredmicrowave :
I would definitively begin by checking cells voltages to determine if it is a battery, or software issue.
[2021-05-17 09:44:27]
chipmangini :
Thanks for the advice guys, I'll see about getting it apart then...
[2021-05-18 06:41:04]
olli_dxd :
Tip, take the top light cover off first with the screws, then its glued in the seams so carefully cut a bit in the seams and then it should snap appart.
[2021-05-18 19:11:01]
fwhflfpuciynzurmjw :
Is there a decrypted version of the dji fly app like nosecneo for the dji go app? Trying to reverse for DUML
[2021-05-19 10:40:10]
validat0r :
Not publicly
[2021-05-19 15:05:25]
thomas.christof :
best I found for my work is this source: <https://github.com/district-michael/fpv_live/tree/master/src/main>
[2021-05-19 20:38:31]
fwhflfpuciynzurmjw :
Thanks, I may work on patching it myself
[2021-05-20 13:07:08]
tmbinc :
Can I access the MA2 blackbox ftpd over rndis? Or how does DA2 pull logs from a MA2?
[2021-05-20 14:55:22]
olli_dxd :
It just kinda mounts it as a drive. Afaik
[2021-05-20 15:06:23]
nopexecutor :
In one of my scripts for MA2 I wrote something like this: tcpConn.sendall(mkwrap(mkduml(sender=2, receiver=0x06, seq_ctr=genSeqNbr(), attrib=0x40, cmdset = 0, cmd = 91, payload=[1]))) #start ftpd
[2021-05-20 15:06:52]
nopexecutor :
I don't remember now the exact use case, but it probably does what is stated in comment :wink:
[2021-05-20 15:12:29]
nopexecutor :
anyway, 99% of files there are encrypted, file format with "LOGH" as magic. Key/scrambling changes for each file download
[2021-05-20 15:49:34]
tmbinc :
Thanks - I see, yet another reason for why I need to get this stupid fused keys...
[2021-05-20 21:13:55]
dkovar :
If you develop a method of extracting unencrypted logs from many/all DJI products I would be -very- interested.
[2021-05-20 22:25:32]
tmbinc :
@takeshi87 - tried sending "55 0e 04 66 02 06 00 00 40 00 5b 01 47 32" to MA2's ttyACM, did I get this wrong?
[2021-05-21 09:41:41]
nopexecutor :
Sorry! I must have mixed that up with command for P4Pv2 RC...
[2021-05-21 09:41:42]
nopexecutor :
./comm_serialtalk.py /dev/ttyACM0 -a 2 -t 1001 -r 2900 -s 0 -i 234 -x 01
[2021-05-21 09:41:47]
nopexecutor :
Please try this one :slightly_smiling_face:
[2021-05-21 22:06:06]
thomas.christof :
I start to investigate the Wifi-Header of the comms in Wifi-Mode. Is there any knowledge available for that already? Or, alternatively, is there any ocusync header knowledge out there? They may have similarities
[2021-05-21 22:45:05]
nopexecutor :
I know different details of Ocusync transmission... But have no idea how it correlates to WiFi one. Are there any dumps of WiFi transmission publicly available?
[2021-05-22 08:48:51]
thomas.christof :
I can provide some. Do you wish to receive them via PM or should I drop them in this channel?
[2021-05-22 10:06:33]
atlantic :
I am interested as well in the wi-fi dumps, if you are willing to share.
[2021-05-22 13:58:53]
thomas.christof :
Sure. It is a simple takeoff and landing procedure.
[2021-05-22 13:59:13]
thomas.christof :
Let me know if you do require any specific dump
[2021-05-22 17:06:29]
atlantic :
thanks a lot
[2021-05-22 22:01:26]
glhs958 :
Helpful knowledge appreciated. I just bought a used P4 Pro V2 for a very reasonable price. Yaw motor for gimbal seems to have a vibration that comes and goes and that creates a jello effect in video or a not so sharp image. It also has a god awful buzz/hum when it moves. I am assuming simply replacing the yaw motor would fix this situation?
[2021-05-24 06:43:41]
olli_dxd :
Replacing the yaw motor can be a pain because it sometimes goes whack, but what you need to do before you order a new motor is check if the existing one is bad/failing or if it’s just not sitting proper. Remove the cap on the back of the yaw arm that covers the gimbal esc board. Disconnect the yaw motor cable check the resistance between phases with a multimeter, three big pads on the flat cable going up to the motor. If there is no big deviation it’s most likely not the motor, however if there is a big deviation between phases you might be looking at a failing motor, and if you can’t measure a phase it’s burnt.
[2021-05-25 02:05:13]
glhs958 :
Thanks for the info. I will check the resistance if it comes back. Yesterday I took the gimbal apart. Didn't notice any thing that really stood out with yaw motor without pressing the housing off to check the hall effect sensors. The rubber ring between the gimbal and vibration dampener seemed to be holding gimbal at a angle slightly and putting pressure on the dampener. anyway after reasembling everything it seems to be working properly. Time will tell
[2021-05-25 12:18:36]
jonathan.bakert :
Any recommended reverse engineering books and protocol primers to help me understand what I'm seeing here as this data flies by wireshark and I stare at it and suddenly realize how low my paygrade is
[2021-05-27 13:06:07]
fuhange :
[2021-05-27 13:34:29]
fuhange :
@mefisto ./dji_imah_fwsig.py -vv -k PRAK-2017-01 -k PUEK-2017-07 -u -i wm220_0101_v02.00.55.69_20161215.pro.fw.sig
[2021-05-27 13:35:02]
fuhange :
I'm trynna decrypt a sig file but how can I get the key
[2021-05-27 14:09:42]
fuhange :
wm161_0306_v03.04.09.74_20210112.pro.fw.sig: Opening for extraction and un-signing
Error: Could not read signed image file header.
[2021-05-27 14:10:17]
fuhange :
did it mean this sig file is unsigned and unencrypted?
[2021-05-27 14:12:30]
fuhange :
thx
[2021-05-27 14:12:45]
fuhange :
seems the 2019 key is still available
[2021-05-27 14:14:05]
fuhange :
and some of them are encrypted
[2021-05-27 14:51:08]
fuhange :
im stuck
[2021-05-27 14:52:00]
fuhange :
after I executed ' python dji_imah_fwsig.py -vv -k PRAK-2019-09 -s -i wm161_0306_v03.04.09.74_20210112.pro.fw.sig'
[2021-05-27 14:52:25]
fuhange :
3 files generated
[2021-05-27 14:53:45]
fuhange :
but When I tried to use dji_flyc_param_ed.py, it showed 'Error: Flight controller parameters array signature not detected in input file.'
[2021-05-27 14:54:37]
fuhange :
thought the .bin (generated file) should be decrypted.
[2021-05-27 15:27:51]
mefisto :
> after I executed ' python dji_imah_fwsig.py -vv -k PRAK-2019-09 -s -i wm161_0306_v03.04.09.74_20210112.pro.fw.sig'
signing (with `-s` ) does not generate 3 files.
Regardless, FC firmware is double encrypted.
[2021-05-28 05:59:14]
digdat0 :
I recall running dji_mvfc_fwpak before dji_flyc_param_ed is required
[2021-05-28 09:49:04]
mefisto :
yes, but the currently published version will not decrypt it; it is mentioned in the tests:
<https://github.com/o-gs/dji-firmware-tools/blob/master/tests/test_dji_imah_fwsig_rebin1.sh#L114>
[2021-05-28 13:56:39]
fwhflfpuciynzurmjw :
Have you guys tried reverse engineering the windows DJI flight simulator? How hard is it to reverse messagepacker with frida?
[2021-05-28 16:34:48]
fuhange :
PS C:\Users\Administrator\Desktop\dji-firmware-tools-master> python dji_mvfc_fwpak.py dec -i wm161_0306_v03.04.09.74_20210112.pro.fw_0306.bin
Target: 0306
Version: v18.52.86.120
Time: 2021-01-12 11:24:49
Size: 1701632
Data MD5: b'69fe2980afc082e291f182b54d3a4a16'
Header CRC: 8c89
Error: Decrypted data MD5 does not match!
[2021-05-28 16:36:31]
fuhange :
did it mean something wrong on last step?
[2021-05-28 16:37:16]
fuhange :
I followed this guide <https://dji.retroroms.info/howto/fc_patcher_tool>
[2021-05-28 17:01:44]
olli_dxd :
Alright so I got an Inspire 1 that is misbehaving on startup. Solid blue light and constant ESC beeping on all 4 corners with no other leds lit. Any ideas?
[2021-05-28 19:42:16]
mefisto :
arm LEDs are controlled by FC.
ESCs are controlled by FC, and start beeping in case of lack of communication to FC.
so all roads lead to one thing. connect it to PC and check if you see any packets sent by the FC. Either you'll see silence and the issue is that FC isn't booting, or it will work but it has some paths broken.
I'd vote FC dead.
[2021-05-29 17:47:18]
olli_dxd :
Yeah, it’s got a weird thing where it spins up the fan and then stops, then the ESCs start beeping and then the FC fan starts going again. However no visible damage to any components on the boards
[2021-05-31 15:30:21]
tobias.latzo_fau :
Does anybody know some good documentation for the DUMLDore adb root exploit? Unfortunately the actual exploit is a binary blob and I cannot find any docs
[2021-05-31 15:53:17]
olli_dxd :
If I hook it to a PC it shows up as DJI serial device, maybe because I have no camera attached
[2021-06-01 16:41:50]
the.hope.ltd :
Hello
I have mavic 2 z wich is not linking to rc
Update always ask for missing updating meduals
The link led on ac stay red even after pushing
Any idea for sulotion
Or where is the rf board on core board of m2??
[2021-06-02 16:12:58]
epoide :
Hi, as i saw in the code of test_dji_imah_fwsig_rebin1.sh there are no decryption/unsign keys for mavic pro2 (wm240,245,246,247) is that right ? or are they ?
[2021-06-02 16:47:04]
tmbinc :
I don't think any decryption keys for eagle hardware are known, but I'm happy to be corrected.
[2021-06-02 16:47:23]
tmbinc :
(WM240 is eagle, right?)
[2021-06-02 18:03:13]
mefisto :
Isn't 'eagle' a chip name rather than aircraft name?
v01.00.0400_m2_0801-extracted/system/build.prop:
```ro.build.display.id=full_eagle_wm240-userdebug 6.0 MDB08M 209 test-keys
ro.build.flavor=full_eagle_wm240-userdebug
ro.product.model=eagle
ro.product.brand=eagle
ro.product.name=full_eagle_wm240
ro.product.device=eagle_wm240
ro.product.board=evb2```
[2021-06-02 18:07:28]
mefisto :
But m0901 has no mention of 'eagle' in related file:
```ro.product.model=L1860
ro.product.brand=Leadcore
ro.product.name=full_wm240_dz_ip0001_v1
ro.product.device=wm240_dz_ip0001_v1
ro.product.board=evb2
ro.build.description=full_wm240_dz_ip0001_v1-userdebug 4.4.4 KTU84Q eng.jenkins.20180821.120123 test-keys```
[2021-06-02 21:22:23]
tmbinc :
Yes, "eagle" is a chip name. But don't they use the same keys for each chip generation, as opposed to product?
[2021-06-02 21:45:57]
mefisto :
In the past, DJI often used the same keys as long as they weren't published.
In first Mavic they actually tried changing keys within the product when old ones were published. Though they only tried that once before realizing it's hopeless.
So they don't have constant rules, but currently it does seem to be - same keys for product line, as long as they're not public.
[2021-06-02 21:55:40]
m4x :
Aka bad practice
[2021-06-02 21:58:19]
m4x :
Good news tho that we don't need to bother with per device encryption locked out in Brom after hand-off to trust zone..
[2021-06-02 23:54:14]
epoide :
all right so no keys for mavic pro2 firmwares i assume
[2021-06-05 09:30:09]
tobias.latzo_fau :
where can i find the key if i managed to dump the firmware?
[2021-06-05 09:55:14]
mefisto :
"the" firmware?
depending on drone, but today mostly in cryptocell flash:
<https://infocenter.nordicsemi.com/index.jsp?topic=%2Fps_nrf52840%2Fcryptocell.html>
[2021-06-10 13:31:22]
flydji :
Hello,
was out a while, grounded for about 2 years. Now, i wanted to fly around little bit with my 2017 old
mavic pro running on 1.03.700. Always used the patched Dji Go 4.1.22 and noticed, it won't work on
android 11. What are the alternatives, could i use the latest Dji Go 4, just log in with a fake
account? Or will it try to update my firmware or something like that? The Dji Fly app won't work
with the Mavic Pro? Thanks ;-).
[2021-06-10 14:53:01]
pingspike :
airplane mode?
[2021-06-10 15:29:44]
oakley75 :
Sincere best option... use any other phone that's not 11 and stay w 4.1.22
[2021-06-13 15:53:11]
tmbinc :
I have a DJI Goggles (white), i.e. the LeadCore-based model. Bought it as bricked, it charges, powers on, but only displays DJI logo, doesn't react to keys or anything. Quickly enumerates as 1ab7/2100 but never as anything else, so DJI Assistant doesn't find anything. Any hints before I disassemble it?
[2021-06-13 16:53:33]
mefisto :
I wonder if there's button combination to enter recovery. Maybe that thing can be easily reflashed.
[2021-06-14 10:33:59]
mingtao :
Never see recovery mode on lc1860 dji over bottom combination
[2021-06-14 10:34:18]
mingtao :
Only poweron-poweroff cycle can help
[2021-06-14 10:34:56]
mingtao :
But sometime it is happen after xxx cycles
[2021-06-14 13:37:53]
atlantic :
Is there any documentation on the LC1860? You probably gets this only when you are DJI or a smartphone OEM.
[2021-06-14 14:04:05]
mefisto :
We only have Leadcore SDK, not the datasheet. The SDK is quite fun as well, but most PDFs are in Chinese.
[2021-06-14 14:05:26]
mefisto :
The photo is from "platform voice enhancement processing parameter debugging guide".
[2021-06-14 15:59:42]
atlantic :
hmmm, my Mandarin is a bit rusty these days. but i assume these pdfs are not from a public source.
[2021-06-14 16:22:33]
fwhflfpuciynzurmjw :
Is it possible to use the comm_serialtalk.py script to issue commands to the drone to do an action (like doing a motor test)?
[2021-06-14 16:27:35]
mefisto :
as long as you know the command which triggers it, you most likely can.
[2021-06-14 16:42:19]
fwhflfpuciynzurmjw :
I used a usb sniffer to get the packet I was looking for but I haven't got it working quite yet, I'll keep at it :slightly_smiling_face:
[2021-06-14 16:42:35]
fwhflfpuciynzurmjw :
Would be cool if there were other ways to get DUML command packets
[2021-06-14 16:45:29]
mefisto :
You mean, sniff the air?
Because if you're talking tap to UART within the drone - this can be done and we do have a capture tool for UART.
[2021-06-14 16:48:33]
fwhflfpuciynzurmjw :
I just had a hardware sniffer capture the traffic between my drone and my computer while clicking different commands on the assistant 2 app
[2021-06-14 16:54:32]
mefisto :
Hardware sniffer? I remember sniffing that directly, via USBcap (and Wireshark as GUI). I had Assistant run within a VM with USB ports forwarded, but I don't think that's even needed.
[2021-06-14 17:05:03]
fwhflfpuciynzurmjw :
yeah I used this <https://www.totalphase.com/products/beagle-usb480/>
[2021-06-14 21:28:13]
tmbinc :
I used an OpenVizsla to sniff the USB traffic between the app and the remote, and then extracted DUML and the video stream.
[2021-06-16 19:47:30]
sneer82 :
Hi guys. Is there any hope DJI FPV v2 controller will ever work with v1 unit?
[2021-06-16 20:01:14]
kilrah :
ask dji...
[2021-06-16 20:28:35]
sneer82 :
Thanks, but that’s not very helpful. I was hoping someone would be able to fiddle with fw enough to unlock it/make it possible…
[2021-06-16 20:35:56]
joonas :
@sneer82 we're not that close to being able to modify the au firmware yet. and even then... i wouldn't hold my breath. have you looked at the tbs tango 2? or the frsky x-lite series? those might suit if you're after a "game controller" style tx.
[2021-06-19 00:08:39]
eyesupdrones :
I'm guessing I need to post here, as this is my first dji drone (mavic pro), and my first time running super-patcher on it! So I ran DJI_Super-PatcherV2.0.2.cmd from my win10 box, and all went well. In the dji go 4 app I see that the app is 4.3.3.7, and the aircraft and remote are both n/a. Cool. So I flew a roof overview job today, well outside any LAANC zones (that's all I have to worry about when I fly my Autel XSP), and when I got up to 247', the go app locked up, and the controller announced "NFZ LIMIT". I had to manually fly back to the home point. Later, I did some research and found that dji thinks that were I was flying was a runway approach path. ??? Any aircraft approaching that airport and being at 247' in that spot will be crashing...not landing! The notes on your github page say "As soon as the Super-Patcher process is complete the drone will ignore all forced GeoZone and NFZ limitations". So...did I do something wrong when running the super patcher? Thanks for spoon feeding me! :smile:
[2021-06-19 00:38:05]
oakley75 :
You let the app online it seems.
[2021-06-19 00:41:10]
eyesupdrones :
I'm new to the dji world; what do you mean by letting the app online? also, does the app tell the controller of the "nfz limit"? or is that somehow built into the controller?
[2021-06-19 01:20:36]
mel69hash :
Do not fly your Mavic Pro with your data turned on. Switch off data or fly in airplane mode. Update all map before turning off data or before turning into airplane mode.
[2021-06-19 01:30:04]
oakley75 :
Are you using the Go app on ios or android?
[2021-06-19 01:52:06]
oakley75 :
If android, redo app. First force stop it, clear both storage caches, then uninstall. Go to files and search for any related dji, vision, amap, etc files left behind (must have hidden files enabled) . Good full clean. Then install Go4 apk from dji website. Log in for the initial time, but have no drone connected. Just get logged in so it won't limit your flying. It won't ask you again to log in for a very long while. Make sure you turn on the low data mode option, along with disabling every privacy checkbox you can. You only need to give appx location. Now the important part, is to always always be in airplane mode whenever cranking up the app. Always. Without fail. Use Netguard firewall is optimal as redundancy. The point here is even though yes, dji sent your login data back home, they never saw your drone in order to report back/ force update. Remember the goal is that the drone is not to be seen by the app whilst online.
If your on ios, idk but the mission is the same.
Note: no maps as expected since the app's offline. You can also roll your on apk (Go4 version 4.1.22) and be better off but the newest app is unfortunately much better and I recommend.
If it were me, I'd reflash the MP1 all again as well. Peace.
[2021-06-19 03:29:01]
eyesupdrones :
Yes, android. Thanks so much for the info! I'm guessing that flying with the phone in airplane mode will prevent any gps data from getting into the jpeg metadata. That's an interesting issue. I'll have to give it a shot and see what happens; I'll also need to consider what that means for any Part 107 work I want to do.
[2021-06-19 14:56:08]
oakley75 :
I would speculate that the app saw your non-current firmware and updated it (or at least in part).
[2021-06-19 18:20:48]
quad808 :
:stuck_out_tongue_closed_eyes:Good 'old DJI. Its a shame really, that they never bothered to put a "Turn off all data" in the full app. Hmmmm....they only did this with a stripped down version of the Go app. It makes one wonder why.......
[2021-06-28 04:11:29]
joonas :
given i'm connected to device a via serial and device a and b are connected wirelessly, is there some way to send duml commands to device b from the pc?
[2021-06-28 04:11:38]
joonas :
in my case they are the fpv goggles and and air unit
[2021-06-28 04:11:55]
joonas :
but lets say device a is any standard dji remote and b is a drone
[2021-06-28 07:08:34]
mefisto :
You typically can send a message to drone through the RC, in DJI product.
All modules are connected into a network and most of them can route DUML packets and know which way to route them to a specific module.
Though the packet forwarding code sometimes has kind of hardcoded firewall, and drops some packets based on header fields.
[2021-06-28 07:56:26]
joonas :
could /etc/dji.json be in charge of the routing rules?
[2021-06-28 09:37:02]
mefisto :
In platforms at which I looked, the rules were hard-coded. Maybe now they're in config file, don't know.
[2021-07-05 12:37:36]
luluminjeong15 :
Does anyone have DJI Mini2 controller firmware file? How can I get it?
[2021-07-05 16:11:33]
phantom32021 :
Hi, sorry for the long post.
I have been trying to mod my phantom 3 standard,
it is running p3c_FW_V01.08.0100.bin
I created the modified firmware using the P3I1-FW-Toolv2 and edited the parameters by copying them from the video on YouTube, I have renamed the file PMCAPPFw3.bin and copied it to the sd card, when I put the sd card in it doesn't do anything, I've tried the bind button and reformatted the sd card. Can anyone help me please
[2021-07-06 15:34:47]
epoide :
Hi, I saw somewhere that the mavic pro 1 had adb enabled so you can access to the android running on it but i'm trying to find out if all firmware versions of mavic pro 1 have ADB enabled or not. any chance anyone here know that information ?
[2021-07-06 16:03:27]
pingspike :
@epoide check this out: <https://dji.retroroms.info/howto/dumlracer>
[2021-07-09 20:21:42]
spamayl :
Hey guys, been out of this game for about a year now since someone was borrowing my drone. Just got it back and looking to get into it again. I see there is now a new software/site called dronehacks. Last I recalled, NLD had just barely released as a product. What is the difference between the two at this point and what is best practice? I have a mavic pro 1 on an older firmware (gotta check still and find out which specifically)
[2021-07-09 20:49:37]
pingspike :
.700 is still the go-to for the Mavic 1 Pro @spamayl :+1::skin-tone-2:
[2021-07-09 20:50:16]
spamayl :
Modded dji go still required/recommended? Is there a more up-to-date one?
[2021-07-09 21:10:20]
pingspike :
I’m still using a modded GO4 v4.1.22 with my MP1
[2021-07-09 21:10:35]
pingspike :
nothing newer due to secneo :confused:
[2021-07-09 21:22:37]
spamayl :
Just tested with latest app, no patch and it appears to work. What did we need the patch for again? Sorry, this was all just so long ago
[2021-07-10 22:53:16]
chaseclear :
Hey y’all, been down a few rabbit holes the last few days searching for some options for the Mavic Air 2. Mainly trying to find a solution to “offline” or bypass activation. Purchased off of EBay, and DJI confirmed fraudulent/stolen therefore cannot activate. Any help is appreciated!!
[2021-07-10 23:52:19]
oakley75 :
Afaik, activation not happening. Sorry
[2021-07-13 14:36:15]
digdat0 :
File a claim on eBay, get your money back. Selling. Stolen goods is against their TOS and, even if a seller has no return policy, eBay/PayPal should cover. If not, chargeback via bank or credit card
[2021-07-14 10:37:59]
luluminjeong15 :
Does anyone try to use <https://github.com/Toemsel/dji-wifi-tools> this tool??? I want to use this tool and sniff the Phantom4 packet, but I don't know how to use this program.
[2021-07-14 15:33:45]
chaseclear :
Yep, it was a process but finally got refunded and purchased a new one. They let me keep the old one as well, so have spare parts but would love to mod it
[2021-07-18 18:58:23]
ipatch :
i don't remember if i posted this or not (please forgive me if i have). related, but unrelated to drone re work. i have a relatively old laptop battery, a dell xx327 i believe it has a vendor specific ti bq chip that was designed specifically for dell. ...long story short i believe there is a flag set on the BMS board that is preventing the battery from operating. ie. the laptop dies with the battery plugged in. i can not unset this flag due to the battery being sealed. i believe there are 2x specific keys that required for changing flags in the battery bms. i've deconstructed the battery, the 18650 cells look brand new, and i believe this flag in the control board popped up due the battery not being used for several years. i believe i'm at the point where i have to boot one of the control chips BQ20889 into a bootrom mode and dump the FW to retreieve these unseal keys. i saw in one of the github repos some people did this work for some of the dj drones, and provided some files/scripts related to ida to aid in this process. all of this is pretty new to me, and if somebody wants to hold a spoon :spoon: for me as i struggle/chug along this process, i would be super grateful.
feel free to `@` me.
[2021-07-18 22:57:56]
mefisto :
Depending on chip model, TI BMSes use either two 16-bit values, or one SHA key for unseal / full access authorization. These are set by device manufacturers, and rarely published - even though repair technicians often do know them. The most comprehensive tool to unlock such chips is Russian UBRT - it has a large database of batteries and stores keys for most of them. It is paid though, so unless you'll find a repair shop which will allow you to use it, it's probably not worth it.
The open-source tool within dji-firmware-tools only supports two specific chips, so you'd have to write support for your chip to use it.
For whether you can enter bootloader / dump anything when sealed - there are ways for that, but I never explored this. When using the chip in expected manner, sealed mode does not allow most of the commands.
Note that your laptop knows the key - it is used to update battery firmware. You can sniff the update to get it.
[2021-07-19 00:12:06]
ipatch :
are you referring to the _unseal_ key possible being stored in a dell BIOS update, and possibly the dell bios update containing an updated firmware for the bms?
and that updated bms fw containing the keys to unseal?
i wouldn't think the updates contain the keys, but as you know my experience with this is limited to tinkering with this dell laptop battery. and i'
[2021-07-19 00:13:25]
ipatch :
*and i've read that attaching a jumper wire to one of the pins of the IC the bq chip can place the IC in bootrom mode.
either way, i might poke around with the dell bios updates and see if it changes any of the software versions running on the laptop battery board.
[2021-07-19 10:37:51]
mefisto :
> are you referring to the _unseal_ key possible being stored in a dell BIOS update, and possibly the dell bios update containing an updated firmware for the bms?
Maybe within BIOS, maybe separately, but flashed during update process. I've seen someone sniffing such update on Mac.
> and that updated bms fw containing the keys to unseal?
No, that's very unlikely. See instruction flash update process in documentation of similar chips, then you will understand what I mean.
> i've read that attaching a jumper wire to one of the pins of the IC the bq chip can place the IC in bootrom mode.
Interesting. It's possible I guess, though I didn't seen such functionality in documentations of the chips I looked into.
[2021-07-20 17:36:56]
fwhflfpuciynzurmjw :
Is it possible to enable debugging on the Mavic Assistant 2 Version? I unpacked the asar, patched the code acording to <https://dji.retroroms.info/howto/assistanddebug>, and repacked it. It looks like the inspect element thing pops up, but the app freezes and eventually crashes soon after.
[2021-07-21 09:39:18]
tmbinc :
Same behavior here and I'd be interested in a solution as well.
[2021-07-21 09:57:19]
joonas :
i was able to patch that behavior out of the fpv assistant 2. i'll try to see what i changed in a bit.
[2021-07-21 09:58:41]
joonas :
(no device debug menus on fpv version)
[2021-07-21 16:40:05]
fwhflfpuciynzurmjw :
That would be very helpful, thank you so much.
[2021-07-22 11:46:21]
tmbinc :
Trying to revive a water-damaged Mavic Air 2(S) battery. I've cleaned everything up, cells still have charge, battery controller says:
```Raw FirmwareVersion response: 0b 43 07 01 01 00 27 00 03 85 02 00 8f 8f 8f
Auto-selected chip: BQ40z307, Texas Instruments BQ40z307 chip for DJI
Importing comm_sbs_chips/BQ40z307.py
Reading simple command at addr=0xb, cmd=0x16, type=uint16, opts={'subcmd': None}
Raw BatteryStatus response: d7 4a fe
BatteryStatus: 0x4ad7 bitfields Battery's Alarm and Status bit flags
ERROR_CODE: 7=Unknown Error [EC] Function error code
FULLY_DISCHARGED: 1=Fully [FD] Battery capacity is depleted
FULLY_CHARGED: 0=Not fully [FC] Battery is full
DISCHARGING: 1=Yes [DSG] Battery is discharging
INITIALIZED: 1=Recalibrate [INIT] State of calibration/configuration
REMAINING_TIME_ALARM: 0=Inactive [RTA] Remaining time to depletion alarm tripped
REMAINING_CAPACITY_ALARM: 1=Active [RCA] Remaining capacity alarm tripped
TERMINATE_DISCHARGE_ALARM: 1=Active [TDA] Battery capacity is depleted
OVERTEMPERATURE_ALARM: 0=Inactive [OTA] Temperature is above pre-set limit
TERMINATE_CHARGE_ALARM: 1=Active [TCA] Charging should be suspended
OVER_CHARGED_ALARM: 0=Inactive [OCA] Battery is fully charged```
[2021-07-22 11:49:32]
tmbinc :
Is FD=1 the problem? Can I reset it?
[2021-07-22 11:50:45]
tmbinc :
PFStatus is 0, PFAlert is 0.
[2021-07-22 11:53:35]
tmbinc :
Cell0Voltage, Cell1Voltage is in range (~3.9V), but Cell2Voltage (and Cell3Voltage, but it's only 3 cells) reads as 0. Measuring it with a DMM yields ~3.9V as well
[2021-07-22 11:54:14]
tmbinc :
So maybe that's the problem... Should Cell*Voltage be good for 0..2 on this 3S battery?
[2021-07-22 13:24:00]
mefisto :
No, FD means it "normally" discharged, not below damage threshold.
[2021-07-22 13:26:12]
mefisto :
Note that I didn't implemented cleaning PFF2 flag which is dji-made add-on to the firmware. So if you clear TIs PF flag, the PFF2 will keep it locked.
For cell voltages - I'm pretty sure voltages from all cells should be visible for the chip. If one is zero, it will re-enter PF.
[2021-07-22 13:42:35]
tmbinc :
But PFStatus=0 means it didn't enter, PF, right? I wonder why if Cell 2 voltage reads 0.
[2021-07-22 13:54:15]
mefisto :
AFAIK PFStatus is just a status, additional field which is also set when PF flag is set (though hard to say if DJI honors that in their firmware changes).
The main PF flag is in OperationStatus, if I remember correctly.
[2021-07-24 05:23:45]
sambuko :
Try this tool [https://github.com/o-gs/dji-firmware-tools/issues/196#issuecomment-885636238](https://github.com/o-gs/dji-firmware-tools/issues/196#issuecomment-885636238)
[2021-07-24 06:52:51]
joonas :
@tmbinc @fwhflfpuciynzurmjw let debug = process.argv[2]=='debug'?true:false > let debug = true and remove the ipcMain.on('open-devtools' event handler completely in main.js
[2021-07-24 06:52:55]
joonas :
i think that did the trick
[2021-07-24 06:53:02]
joonas :
if not, let me know and i can diff the other .js too
[2021-07-24 06:53:20]
joonas :
it's probably that event handler that's stopping you
[2021-07-24 06:56:48]
joonas :
oh and you still need to uncomment the openDevTools() line, you do get a debug tools button with debug = true, but that window is blank for me for whatever reason.
[2021-07-26 16:01:08]
fwhflfpuciynzurmjw :
Thank you so much for the information @j00n45. The inspect windows now appears for me when launching the app. I confirmed that you need "var debug = true" on line 53 for anything to show up in the resources tab. However the app still appears to have a strange resolution and crashes when trying to do anything. Would very much appreciate it if you had any other ideas. Thanks!
[2021-07-26 19:25:53]
funnel :
Youn need to comment out the ipcMain like he told you
`//ipcMain.on('open-devtools', function(event, arg){`
// console.log('receive open-devtools event:',arg);
// if(!!arg){
// mainWindow.webContents.closeDevTools();
// }
//});
[2021-07-26 19:55:11]
fwhflfpuciynzurmjw :
Yes I've already done that ^
[2021-07-26 20:44:44]
funnel :
Maybe the Mavic Assistant version is a little bit different. I can't help.
[2021-07-26 20:48:19]
fwhflfpuciynzurmjw :
What assistant were you using then? The FPV assistant?
[2021-07-26 20:49:37]
joonas :
fpv assistant here yes
[2021-07-26 20:50:15]
joonas :
try looking for further devtools references, maybe the event listener is duplicated
[2021-07-26 20:51:07]
fwhflfpuciynzurmjw :
Yeah I'll compare the main.js files between assistants I guess
[2021-07-30 20:33:49]
fwhflfpuciynzurmjw :
Actually it looks like the issue occurs with either assistant... Still not sure what's causing it
[2021-07-31 11:39:44]
joonas :
@fwhflfpuciynzurmjw (and @tmbinc) my bad, i missed a diff. you also need to patch build/utils.js like this:
[2021-07-31 11:40:18]
joonas :
that's the last line of utils.js prettified but you can do the replace inline easy.
[2021-08-05 15:42:14]
fwhflfpuciynzurmjw :
Thanks a lot for the tip @j00n45, Looks like that solved the crashing issue. For whatever reason the devtools still don't come up. Guess I need to play around with it a bit more
[2021-08-05 15:42:46]
fwhflfpuciynzurmjw :
(devtools meaning the extra menus on the left side)
[2021-08-05 16:35:33]
jaanuke :
Been long time, but i somewhat remember debug_enabled had to be false for extra menus to appear @fwhflfpuciynzurmjw ... So debug=1, debug_enabled=false.
[2021-08-06 17:53:09]
fwhflfpuciynzurmjw :
Thanks for the suggestion @jaanuke, it still seems like the menus are inaccessible though. Perhaps it's different for the mavic version? I'll keep working at it
[2021-08-06 18:36:48]
joonas :
@fwhflfpuciynzurmjw the fpv version doesn't include any code for debug menus
[2021-08-06 18:36:54]
joonas :
don't know about the mavic version
[2021-08-06 18:39:20]
fwhflfpuciynzurmjw :
Oh ok interesting, so if you can't access the menus then what is the point of enabling debugging?
[2021-08-06 23:58:50]
joonas :
i was just poking around the assistant out of curiosity
[2021-08-11 20:14:19]
fwhflfpuciynzurmjw :
Oh? What does that entail? Does it make it easier to view the source code or something? Really curious as to why DJI would have something like that in the mavic assistant. @j00n45
[2021-08-11 20:14:24]
fwhflfpuciynzurmjw :
And thanks again for the information
[2021-08-12 12:56:45]
joonas :
that's the default chromium debugger, it's included with Electron, which DJI use to package up their app. you get an interactive Javascript console and get to poke around in the app at runtime however you want. it's pretty useless though, all the good stuff is hidden in native libraries and not visible from js. @fwhflfpuciynzurmjw
[2021-08-12 12:57:37]
joonas :
i though that's what you meant when you asked about debugging.
[2021-08-12 15:14:00]
fwhflfpuciynzurmjw :
Is it possible to use the console to access data from those native libraries @j00n45
[2021-08-12 19:25:31]
kenhoung3553 :
For this Inspire 1 Pro, I helped my friend write the parameters and write the firmware at the end. He saw that the gimbal was shaking and turned off the power. Oh, my God! Now it keeps calling when it is turned on. But it doesn’t write. The tail light does not turn on. .This platform has two gimbals, X5 and X3. Which one should be used to read? What version should be used to read. #
Result: Success.
========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2016.01.14 18:15:09 =====================
Packet: WM610_FW_V01.06.00.40.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2016.01.15 11:20:46 =====================
Packet: WM610_FW_V01.06.00.40.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.06.00.40.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2021.08.02 12:10:41 =====================
Packet: WM610_FW_V01.11.01.50.bin
========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FW_V01.11.01.50.bin
========== 2021.08.02 17:32:17 =====================
Packet: WM610_FW_V01.11.01.50.bin
[2021-08-12 19:35:36]
joonas :
@fwhflfpuciynzurmjw not really, all the download url-s, serial comms etc are hidden in the libs, it doesn't expose much to the js side
[2021-08-22 11:22:11]
joonas :
complete shot in the dark as i've already been pestering tmbinc and bin4ry about it in private, but does anyone have any ideas how to get P1 based devices (fpv air unit, goggles v1) to boot into recovery or the 2nd slot?
[2021-08-22 11:22:32]
joonas :
i'm stuck in a 3-4 second bootloop, most likely it's dm verity that is the reason
[2021-08-22 11:22:54]
joonas :
tried letting it run for an hour in the bootloop to hit a crash counter - no luck
[2021-08-22 11:23:41]
joonas :
looking at the bootloader i found the following
[2021-08-22 11:23:46]
joonas :
`if (_DAT_f0a4245c == 0x52435659) {`
`_DAT_f0a4245c = 0;`
`*bootMode = 0;`
`}`
`if (_DAT_f0a4245c == 0x464f5441) {`
`_DAT_f0a4245c = 0;`
`FUN_000101fc((int **)ppbVar12,**piVar11,(char *)(DAT_000058a0 + 0x57a8),`
`(undefined4 *)(DAT_000058a4 + 0x57ac));`
`*bootMode = 0;`
`}`
[2021-08-22 11:23:55]
joonas :
so if f0a4245c is set to "RCVY" or "FOTA" during boot we get recovery
[2021-08-22 11:24:06]
joonas :
no idea what magic address f0a4245c is though...
[2021-08-22 11:59:07]
mefisto :
Is that area mentioned in device tree?
[2021-08-22 12:02:02]
joonas :
hmm. i was just reading your wiki-s yesterday about this, but didn't look further. let me go try and find the device tree.
[2021-08-22 12:19:29]
joonas :
`usb@f0100000 {`
`compatible = "synopsys,dwc3";`
`reg = <0xf0100000 0x10000 0xf0a4e000 0x1000 0xf0a42000 0x1000>;`
`clock-names = "usb_aclk\0usb_ctl_refclk\0usb_pclk\0usb_phy_refclk";`
`clocks = <0x02 0xe0 0x02 0xdf 0x02 0xde 0x02 0xdd>;`
`interrupts = <0x00 0x15 0x00>;`
`usb_id = <0x00>;`
`snps,hsphy_interface = "utmi";`
`dji,ref_clk;`
`status = "okay";`
`dji,otg_phy = <0x03>;`
`dji,sw_otg;`
`};`
`usb@f0200000 {`
`compatible = "synopsys,dwc3";`
`reg = <0xf0200000 0x10000 0xf0a4f000 0x1000 0xf0a42000 0x1000>;`
`clock-names = "usb_aclk\0usb_ctl_refclk\0usb_pclk\0usb_phy_refclk";`
`clocks = <0x02 0xdc 0x02 0xdb 0x02 0xda 0x02 0xd9>;`
`interrupts = <0x00 0x16 0x00>;`
`usb_id = <0x01>;`
`snps,hsphy_interface = "utmi";`
`dji,ref_clk;`
`status = "disabled";`
`};`
[2021-08-22 12:19:48]
joonas :
bingo, it's part of the usb controllers address range
[2021-08-22 12:19:58]
joonas :
specifically otg mode it appers?
[2021-08-22 12:20:02]
joonas :
@tmbinc take a look at this
[2021-08-22 12:21:20]
joonas :
it looks like DJI really likes 4 bytes of ascii magic over usb
[2021-08-22 12:31:07]
mefisto :
not hard to prepare a special firmware to any USB controller which would change every possible ID to that.
[2021-08-22 12:33:10]
joonas :
hmm. i have an esp32-s2 or some geekpi nrf52840 boards around. you think it's literally some descriptor id that triggers it?
[2021-08-22 12:35:35]
mefisto :
the addr is constant, in mmio range. It's unlikely to be packet content.
[2021-08-22 12:36:15]
mefisto :
I'm pretty sure with esp32 you're in.
[2021-08-22 12:44:12]
tmbinc :
This is not necessarily USB related, f0a42000 is their clock/misc/ap_sc controller and is referenced from many things
[2021-08-22 12:46:18]
mefisto :
Synopsys DesignWare Core driver is within the upsteram kernel, right?
[2021-08-22 12:46:56]
mefisto :
<https://www.kernel.org/doc/html/v4.18/driver-api/usb/dwc3.html>
[2021-08-22 12:47:31]
joonas :
0xf0a42000 is mentioned in a good 5 more places in the dev tree yeah, i didn't realize to check
[2021-08-22 13:07:33]
joonas :
```DWC_EVENT_EP_CMD_COMPLETE
DWC_EVENT_EP_XFER_NOT_READY
DWC_EVENT_EP_XFER_IN_PROGRESS
DWC_EVENT_EP_XFER_COMPLETE
DWC_EVENT_DEVICE_EVENT_ID_VENDOR_DEVICE_TEST_LMP
DWC_EVENT_DEVICE_EVENT_ID_BUFFER_OVERFLOW
DWC_EVENT_DEVICE_EVENT_ID_GENERIC_CMD_COMPLETE
DWC_EVENT_DEVICE_EVENT_ID_ERRATIC_ERROR
DWC_EVENT_DEVICE_EVENT_ID_SOF
DWC_EVENT_DEVICE_EVENT_ID_SUSPEND_ENTRY
DWC_EVENT_DEVICE_EVENT_ID_HIBER
DWC_EVENT_DEVICE_EVENT_ID_WAKEUP
DWC_EVENT_DEVICE_EVENT_ID_USB_LINK_STATUS_CHANGE
DWC_EVENT_DEVICE_EVENT_ID_CONNECT_DONE
DWC_EVENT_DEVICE_EVENT_ID_USB_RESET
DWC_EVENT_DEVICE_EVENT_ID_DISCONNECT```
@mefisto i didn't find any obvious references to that driver but these event related strings seem to not be DJI specific. for what that's worth, if anything.
[2021-08-22 13:07:45]
joonas :
they appear in a couple of other strings dumbs but not obviously in some drivers
[2021-08-22 13:58:07]
mefisto :
I didn't looked yet how device tree is used within kernel modules; but that's worth knowing.
[2021-08-22 15:13:30]
mefisto :
Yeah, it's not that hard. Here's how the module gets its DTB data:
```match = of_match_device(dwc2_of_match_table, &dev->dev);```
[2021-08-22 16:09:38]
joonas :
correct you are sir, snps,hsphy_interface which is configured in the device tree is used by the dwc3 driver
[2021-08-22 16:27:33]
joonas :
```ret = platform_device_add_resources(xhci, dwc->xhci_resources,
DWC3_XHCI_RESOURCES_NUM); ```
seems to be the only spot the 3rd address is used
[2021-08-22 16:27:44]
joonas :
DWC3_XHCI_RESOURCES_NUM = 2
[2021-08-22 16:31:59]
mefisto :
my bin2elf converter gets very confused by those high addresses, I obviously did not predicted executable code segment to be placed after MMIOs.
[2021-08-22 16:53:54]
joonas :
btw, i tried sending those magic bytes to the usb endpoint that appears during boot for about 5 seconds and no dice
[2021-08-22 16:54:00]
joonas :
shot in the dark anyway...
[2021-08-28 06:32:09]
horrible.programmer.e :
dji-firmware-tools │ on master ?3 ./comm_serialtalk.py /dev/tty.usbmodem1434303 --cmd_set=0 --cmd_id=1 --sender=1001 --receiver_type=31 10 ✘ │ at 02:23:09
55 2b 04 58 1f 2a 00 00 80 00 01 00 12 57 4d 31 36 31 20 55 41 56 20 56 65 72 2e 41 00 03 02 01 00 00 00 05 04 00 00 00 c0 51 5a
[2021-08-28 06:32:33]
horrible.programmer.e :
sftp -P 23 192.168.1.3 255 ✘ │ at 02:30:11
ssh: connect to host 192.168.1.3 port 23: Operation timed out
Connection closed
[2021-08-28 06:32:55]
horrible.programmer.e :
wondering if anyone knows how to connect to the drone after u put it in serial mode
[2021-08-28 06:35:28]
horrible.programmer.e :
whoever reverse engineered this shit is a beast btw
[2021-09-02 00:53:12]
tenrual :
Hi,
The ssh port by default is 22 not 21 (FTP) or 23 (TELNET).
If it can help.
So, i have read the documentation, there are no TCP or kermit, serial comm_serialtalk.py is an "DUML Builder which sends packet to DJI product and receives a response."
The reponse need to be decoded, perhaps this one could be more interesting comm_serial2pcap.py because you can decode the pcap in tcpdump with the correct "dissector".
Theses python tools are amazing, thank for all the work and reverse on the wonderful piece of technologie.
So i need to wait a my drone perhaps next week...
[2021-09-18 19:53:46]
jonathan528 :
I'm stuck. I try to figure out how to use the .lua scripta together with Wireshark. I have tried all the different directories but still get the error messages when starting wireshark. I'm no engineer but i'm really interested on how everything works together.
[2021-09-19 10:09:49]
mefisto :
Doubt anyone will help you with "the error" only you've seen.
[2021-09-28 10:34:59]
alkersan :
Hello! I've been exploring the protocol of DJI Osmo Mobile 2 gimbal, which is probably not a focus device for this community, so I apologize if that's a wrong place. In short - would it be possible to somehow apply [comm_dissector](https://github.com/o-gs/dji-firmware-tools/tree/master/comm_dissector) to the stream of Bluetooth LE values, observed from the device?
[2021-09-28 10:55:39]
mefisto :
That does look like DUML packet. So yeah, you could tell wireshark to decode that 'value' field with LUA dissectors.
Read about heuristic dissectors for details. Or look how it's done for wifi in dji-dumlv1-proto.lua.
[2021-09-28 11:28:28]
alkersan :
:+1: Thank's for the very quick reply! That actually worked, I've added `DissectorTable.get("btatt.handle"):add(0x0018, DJI_DUMLv1_PROTO)` to the end of `dji-dumlv1-proto.lua`
[2021-09-29 18:19:54]
alkersan :
:tada: :partying_face: managed to rotate gimbal over BLE, without DJI Go app (<https://i.imgur.com/noqKOkg.mp4>)
[2021-09-29 18:30:18]
alkersan :
Just a general wondering - can such programmable gimbal be useful for something? Any interest from community? Or maybe i'm just missing something and these devices have already been reversed?
[2021-09-29 19:01:34]
tmbinc :
Nice work! I wonder if there are similarities in the actual gimbal software compared to what's used on the drones.
[2021-09-29 19:03:38]
mefisto :
I'm pretty sure it's just gimbal and camera ripped out of the drone. Module numbers are probably the same (m0400 and m0100), and most commands are common.
[2021-09-29 19:18:58]
alkersan :
yes, the dissected DUML packets 99% correct and contain what is expected. For example these rotations were done by sending "Gimbal Abs Angle Control" opcode, but still not exactly matching
```DJI_DUMLv1
Delimiter: 0x55
.... ..00 0001 0101 = Length: 0x015
0000 01.. .... .... = Protocol Version: 0x01
Header CRC: 0xa9
...0 0010 = Sender Type: App (2)
000. .... = Sender Index: 0
...0 0100 = Receiver Type: Gimbal (4)
000. .... = Receiver Index: 0
Seq Counter: 15
.... .000 = Encryption Type: None (0)
.10. .... = Ack: ACK After Exec (0x2)
0... .... = Packet Type: Request (0)
0000 0100 = Cmd Set: Gimbal (4)
Cmd: Gimbal Abs Angle Control (0x14)
Payload: 76 02 00 00 3a fd 05 0a
Angle1: 630
Angle2: 0
Angle3: -710
Flags: 0x05
Field6: 10
[Expert Info (Error/Malformed): Gimbal Abs Angle Control: Offset does not match - internal inconsistency]
[Gimbal Abs Angle Control: Offset does not match - internal inconsistency]
[Severity level: Error]
[Group: Malformed]```
[2021-09-30 04:40:57]
mingtao :
:+1:
[2021-09-30 08:12:13]
alkersan :
After tinkering with it for another night - here is a list of discovered capabilities:
• rotate to an absolute angle during specified N seconds, yaw and pitch only, no roll
• rotate to relative angle during specified N seconds, yaw and pitch only, no roll
• monitor battery charge level % only (no voltages, i.e. that's not a "smart" battery)
• monitor buttons, zoom and joystick states
• couldn't make it switch between Follow and Free modes, i.e. what the hardware button does.
• didn't dig into setting the acceleration parameters, but seems should be possible, as official app allows that
• didn't dig into SmoothTrack oprtions, which returned as supported, when connected via [official SDK](https://developer.dji.com/api-reference/android-api/Components/Gimbal/DJIGimbal.html)
And that's I guess a pretty much it for such a device, i.e. it's as dumb as it should be
[2021-09-30 08:14:54]
alkersan :
As for application side - probably making a ROS package, usable as a generic 2 axis gimbal for misc hobby/robotics projects might be a good start
[2021-10-01 16:08:26]
djshadowxm81 :
So I may be out of the loop. But how does one go about unpacking the apk for DJI Fly aka DJI go 5. I've been looking for methods to unpack the dex file based on some articles on the go 4 version but I'm lost on where to begin. I've started snooping around on the shared libs with ghidra but that's as far as I've gotten. I'm looking to snoop around to see what I can do with my Mini SE
[2021-10-02 14:40:32]
joonas :
@mefisto for the record, those FOTA or RCVY flags lk looks for appear to be set by the kernel, there's no way to set them via the rom or lk itself.
[2021-10-02 14:41:10]
joonas :
and actually if you trip verity then it will always try to restart to FOTA mode, but fail (no idea exactly why as LK is silent in PROD)
[2021-10-02 14:42:08]
joonas :
i was able to rescue the vista by powering off at the right time during bootup to increment the retry counter by looking at the serial log so it eventually booted to recovery
[2021-10-02 14:42:13]
joonas :
goggles are proving more stubborn so far, same timing as vista didn't seem to work. just got back from the store with some decent probes to hook up to serial (and avoid ripping off another tx pad)
[2021-10-22 02:08:18]
almorawaka :
Hi, I am new to this group. Please help me to to find data sheet for this MAX1785 smart battery controller.
[2021-10-22 11:42:32]
fredmicrowave :
Here:
<https://www.digchip.com/datasheets/parts/datasheet/280/MAX1785-pdf.php>
[2021-10-23 18:00:12]
almorawaka :
Thanks Fred, It gives wrong data sheet..
[2021-10-23 18:02:50]
almorawaka :
MAX1785 difficult to find online :sleepy:
[2021-10-24 19:59:06]
glhs958 :
Can someone tell me if the camera/gimbal is the same "swapable" between the phantom 4 pro/advanced and pro v2?
[2021-10-24 20:48:25]
lolo780 :
Part 141 fits adv, pro and v2
[2021-10-25 00:10:05]
glhs958 :
thanks, I thought so.
[2021-10-26 12:05:11]
cs2000 :
cs2000 joined the channel.
[2021-10-26 18:02:22]
test :
test joined the channel.
[2021-10-28 07:20:56]
abroo :
abroo joined the channel.
[2021-10-28 14:51:13]
len :
len joined the channel.
[2021-10-28 15:03:04]
pixel :
pixel joined the channel.
[2021-10-28 15:22:16]
eddy :
eddy joined the channel.
[2021-10-28 17:10:01]
pepper :
pepper joined the channel.
[2021-10-28 19:29:45]
doctor :
doctor joined the channel.
[2021-10-28 20:39:21]
vorno :
vorno joined the channel.
[2021-10-28 21:48:56]
jj :
madmaqc joined the channel.
[2021-10-28 22:17:27]
habb :
habb joined the channel.
[2021-10-28 23:17:12]
stanlee :
stanlee joined the channel.
[2021-10-29 00:27:41]
icologne :
icologne joined the channel.
[2021-10-29 01:10:38]
priegor :
ddasher joined the channel.
[2021-10-29 03:55:23]
will :
will joined the channel.
[2021-10-29 05:59:30]
vortex :
atlantic joined the channel.
[2021-10-29 07:21:15]
zkar :
zkar joined the channel.
[2021-10-29 16:54:25]
dronedavid :
dronedavid joined the channel.
[2021-10-29 19:02:48]
trunk2 :
trunk2 joined the channel.
[2021-10-30 08:03:11]
antoine :
antoine joined the channel.
[2021-10-31 13:38:09]
ambushbug :
ambushbug joined the channel.
[2021-10-31 19:59:40]
skyninja :
skyninja joined the channel.
[2021-10-31 21:09:50]
lazypilot :
lazypilot joined the channel.
[2021-11-01 13:11:40]
leo :
pilipala008 joined the channel.
[2021-11-01 14:15:42]
cs2000 :
dji-rev-bot added to the channel by cs2000.
[2021-11-01 14:17:07]
phantom :
phantom joined the channel.
[2021-11-01 14:44:03]
qilinsunge :
qilinsunge joined the channel.
[2021-11-01 15:55:05]
newlc :
newlc joined the channel.
[2021-11-01 16:32:23]
jpaxel :
jpaxel joined the channel.
[2021-11-01 22:49:23]
tissy :
tissy joined the channel.
[2021-11-02 00:55:25]
fly2high213 :
fly2high213 joined the channel.
[2021-11-02 05:08:32]
emilburzo :
emilburzo joined the channel.
[2021-11-02 09:00:42]
cs2000 :
!beer
[2021-11-02 09:00:42]
dji-rev-bot :
Its time for a beer!
[2021-11-02 09:04:46]
polarfly :
polarfly joined the channel.
[2021-11-02 10:32:25]
airiver :
airiver joined the channel.
[2021-11-02 12:11:50]
masskrug :
starka joined the channel.
[2021-11-02 13:55:58]
auster :
auster joined the channel.
[2021-11-02 17:09:12]
whydji :
whydji joined the channel.
[2021-11-02 18:06:40]
pingspike :
can we mute either @system or channel joining / leaving messages?
[2021-11-02 18:06:53]
pingspike :
it’s not IRC man…
[2021-11-02 19:00:31]
w0h :
You can turn it off for yourself in settings - advanced.
[2021-11-02 19:04:06]
pingspike :
thanks man
[2021-11-02 20:45:46]
pingspike :
apparently not on the iOS app ?
[2021-11-03 08:55:46]
cs2000 :
@pingspike yes il sort it now
[2021-11-03 10:03:21]
pingspike :
cheers Chris ??
[2021-11-08 00:23:53]
lawq :
so
[2021-11-08 00:24:28]
lawq :
Can someone explain to me, is the mini se's firmware format different than the mp1, if so; when did they change and is there a page I read on the changes
[2021-11-08 00:24:57]
lawq :
Alternatively, what am I doing wrong, DDD firmware is not elf
[2021-11-08 00:25:40]
lawq :
ima gonna use binwalker later when I have time but just wondering if someone smarter did the work
[2021-11-09 00:58:12]
lawq :
its just a tar https://www.youtube.com/watch?v=FZshLw5PGpo
[2021-11-16 00:24:35]
czokie :
@lawq - Yes, it appears to be different. I am trying to get clarification from a few others on this topic. The things that are unchanged. You still un-tar it. You still un-sign it using dji_imah_fwsig.py but thats where I got stuck too. dji_mvfc_fwpak.py has a key and encryption method hard coded. I was led to believe that the key is unchanged for newer birds, with just a change to the cyphers. I gave that a go, and ended up with nothing too.
[2021-11-16 00:25:36]
czokie :
The other question about converting to ELF for use in your favourite tools - Thats another step (and was another step for older birds too). But we cannot get to that if we cant see the unencrypted files.
[2021-11-16 12:42:56]
trixo :
Hi everyone, noob question, I downloaded firmware image from dankdownloader, extracted it with tar and extracted one of the sig files with dji_imah_fwsig, I managed to view parts of the filesystem by fixing the system.new.bin with sdat2img, however, the filesystem looks incomplete (missing lot's of Linux related files in etc, no init etc.), I assume since this is an update, not all the files will be there, but was wondering weather I'm missing something. I'm also having a hard time decrypting the normal.img and recovery.img to get a plaintext Linux kernel and DTB. The auth key PRAK-2020-01 is valid (Image file head signature verification passed) however non of the TBIE keys work (tried all manually, all result with a wrong checksum), any ideas? Thank you
[2021-11-16 13:05:41]
masskrug :
DJI packs some files in the InitRD/LRFS. The system partition ist only /system, with / in the LRFS. The system partition on newer birds is incrementally. So get the version with the lowest number and maybe it contains a full set.
[2021-11-16 13:06:38]
trixo :
is the LRFS part of the normal and recovery .img files?
[2021-11-16 13:07:11]
trixo :
those are the only files I cannot seem to unsign
[2021-11-16 13:07:32]
masskrug :
AFAIK, the LRFS is not part of the normal.img
[2021-11-16 13:08:00]
masskrug :
Also the kernel is seperate
[2021-11-16 13:08:14]
masskrug :
But the exact layout depends in your bird.
[2021-11-16 13:08:33]
trixo :
Thanks for the help, I saw the normal image contains a kernel and DTBs, but failed to extract them
[2021-11-16 13:08:43]
trixo :
im looking at the pm430 firmware
[2021-11-16 13:09:52]
trixo :
I assume the only way to get a LRFS is by getting root on the device (if I cannot find it anywhere in the firmware)
[2021-11-16 13:10:15]
masskrug :
let me check, maybe I am mixing normal.img and system.img
[2021-11-16 13:13:45]
masskrug :
my fault: the kernel and lrfs are in normal.img, and the system partition are in the system.img
[2021-11-16 13:15:06]
trixo :
Good to hear that, thank you for checking, im currently "walking back" the fw versions in home of managing to decrypt the normal.bin image
[2021-11-16 13:15:18]
trixo :
in hope*
[2021-11-16 14:47:08]
tmbinc :
PM430 is E1E so TBIE should be the 7bca... key. Have you tried that one on normal.img?
[2021-11-16 14:47:39]
tmbinc :
Firmware updates are all full, there are - as far as I know - no incremental updates. Specifically for PM430 I am sure there aren't - any firmware update should be good.
[2021-11-16 14:48:18]
tmbinc :
and then LRFS is in normal.img, yes
[2021-11-16 14:48:29]
tmbinc :
along with kernel, DTB(s) and TZOS
[2021-11-16 14:56:17]
trixo :
Thanks for detailed information, i d'ont see a key starting with 7bca in dji_imah_fwsig.py, I also double checked the firmware tools on github but font see it there either, i must be using the wrong unsigner script? the image does use the IM*H header
[2021-11-16 14:56:57]
trixo :
I tried TBIE-2018-07 though TBIE-2021-06 on the normal.img file
[2021-11-16 15:17:40]
trixo :
if you have the key and can paste here the hex values, ill try it. Appreciate it :)
[2021-11-16 15:45:37]
tmbinc :
7b ca 59 6f 22 73 c5 19 5e 41 42 aa 3d 20 1e 25
[2021-11-16 15:45:43]
tmbinc :
sorry, I think it got lost somehow
[2021-11-16 16:08:32]
trixo :
Thank you! Ill try this later and keep you posted
[2021-11-16 18:55:05]
trixo :
Update: 7bca key worked perfectly, got the kernel and gz LRFS. thanks guys, really appreciate the help
[2021-11-18 01:17:03]
coldflake :
coldflake joined the channel.
[2021-11-18 12:48:51]
the_lord :
the_lord joined the channel.
[2021-11-22 02:56:47]
vorno :
Sorry for the dumb question... can the Mini 2 be hacked at all? I'd dearly love to remove the altitude limit near my house.
[2021-11-22 08:12:48]
masskrug :
According to the drone-hacks birdmap, the Mini2 can be fully compromised: https://drone-hacks.com/birdmap
[2021-11-23 14:27:44]
fredmicrowave :
Yes, 100% for mini2, straightforward and no need to be online.
[2021-11-26 18:18:15]
kyleplacke :
hello all
[2021-11-26 18:20:27]
kyleplacke :
i bought 3 mavic mini's from a electronics recycling place for 250 bucks, figure's i have 2 two spare screwing around with, i've managed to downgrade firmware to.0300 i just want to do flips with my mini lol
[2021-11-26 19:19:02]
kyleplacke :
welp, i figured out mode zero is all thats needed. glad I bought three lmao
[2021-11-26 20:12:22]
quad808 :
video?
[2021-12-05 12:06:20]
lazypilot :
mode zero? please exlpain :)
[2021-12-06 18:16:55]
kyleplacke :
https://wiki.dji-rev.com/howto/parameterhacks
[2021-12-06 18:22:40]
kyleplacke :
so now that i have 3 piles of components, i just started designing a 3d printed frame to house all the stuff minus the gimbal but retaining the camera. essentially i was flying these with one of those strap a phone to your face ordeals and it really suited my needs perectly besides the fact that they broke so easily in my rookie freestyling, you guys think the mini is modifyable enough to stray from the stock orientation of the motors
[2021-12-06 22:13:03]
lawq :
Hey, does anyone know where I should power my mavic 2 board? (Bench power)
[2021-12-06 22:25:31]
tmbinc :
I don't know for the Mavic 2, but typically all DJI mainboards have a test point near the power FPC for Vbat. Be careful though to not put 12V (typically sufficient) into a logic pin :)
[2021-12-07 01:29:33]
lawq :
Im guessing its these 4, is which pan which documented?
[2021-12-07 01:29:40]
lawq :
Pad*
[2021-12-07 12:19:56]
mingtao :
look another side
[2021-12-13 00:39:18]
console :
Hello!
I'm trying to recover some mavic pro (artic white) batteries. I've had some success as one (originally led 1, 16 flashes) of them is now fully functional (post PF flag removal) and capacity wise appears to be nominal, but I've 2 more here that are completely unresponsive, no LEDs, even when on the charger.
Cracking one open I have charged the cells individually via current limited bench PSU as per my previous successful attempt. Battery voltage measured across the cells is now at 11.4v.
However the PACK voltage measured at pin 29 on the BQ chip is 2mV.
And the BQ chip is completely unresponsive to smbus commands, I believe it needs a voltage > than VSTARTUP (set in the firmware of the chip) from reading the datasheets to turn on and suspect because PACK traverses a chemical fuse (according to the example schematic on the data sheet) that a fuse has been blown.
So that brings me to my questions :)
Does anyone have any set of "test voltages" I can measure across the battery controller board?
Does anyone know where the fuse is located?
Does anyone have a reversed or partially reversed schematic for the battery controller board?
I'm tempted to inject power on pin 27 and 29 to wake up the chip, but I'm pretty sure there's something else at play preventing the chip from waking up as the battery is good, the circuit looks fine (no obvious shorts, no heat, etc) just the controller is unresponsive.
[2021-12-16 15:25:24]
oto :
Hello!
Any idea if it is possible to enable GNSS/GPS UBX raw output dump of Phantom4 or Mavic2? I see that parameters contain rtk flags are any of these working also in non-RTK firmwares?
[2021-12-17 05:08:23]
mingtao :
look UBX format
[2021-12-17 05:09:00]
mingtao :
and DJI dont use RTX from Ublox
[2021-12-17 05:22:03]
mingtao :
https://www.unicorecomm.com/
[2021-12-18 19:32:57]
oto :
DJI uses ublox M8 in non-RTK and F9 in RTK drones. Looking how to log output from nonRTK as firmware seems already supports it.
[2021-12-21 05:33:44]
mingtao :
https://fccid.io/SS3-WM334R1801/Internal-Photos/Int-Photos-3810591.pdf
[2021-12-21 05:33:55]
mingtao :
where you find F9 ?
[2021-12-21 10:31:19]
linoko :
gimbal
[2021-12-30 07:22:34]
whyyoulittle333 :
has a way to unsign the mavic air 1 (wm230) firmware been found? i've been trying to use `dji_imah_fwsig.py` but i cant find a key combo that works. i have also heard of a way to get shell access but cant find much info about it
[2021-12-30 09:26:09]
joonas :
@whyyoulittle333 -k PRAK-2017-08 -k UFIE-2018-01
[2021-12-30 09:26:20]
joonas :
you can find it in the comments in dji_imah_fwsig.py
[2022-01-01 02:18:09]
whyyoulittle333 :
ty
[2022-01-11 18:48:22]
sbuchan :
Does anyone know which parameter(s) to edit on the DJI FPV to disable the RTH altitude? I have removed the altitude limit, but it still tries to RTH at 500m. Is there a parameter index for the FPV anywhere?
[2022-01-11 19:35:41]
olli_dxd :
If the naming for params are somewhat the same since the Inspire 1 and Phantom 3 generation it should be called "g_config.go_home.fixed_go_home_altitude_0"
[2022-01-11 19:42:42]
olli_dxd :
Do you have both the main BAT+ and BAT- wires connected and the balancing cable connected? What board version is it? P01690.??
I've also attached an image of the testpoints on the bottom side of the board.
[2022-01-11 19:42:42]
olli_dxd :
Do you have both the main PACK wires connected and the balancing cable connected? What board version is it? P01690.??
I've also attached an image of the testpoints on the bottom side of the board.
[2022-01-19 13:12:18]
oto :
Doesn't matter if it is F9 on P4 RTK as also M8N on P4 can be converted to M8T and log raw measurements.
[2022-01-24 15:23:13]
hiker234 :
hiker234 joined the channel.
[2022-01-24 15:57:32]
hiker234 :
der
[2022-01-24 15:57:39]
jackmax :
jackson joined the channel.
[2022-01-24 15:58:08]
jackmax :
jackson joined the channel.
[2022-01-24 23:37:45]
coopers :
coopers joined the channel.
[2022-01-25 21:11:00]
pilot3885 :
pilot3885 joined the channel.
[2022-01-26 13:03:46]
riaanvoigt309 :
riaanvoigt309 joined the channel.
[2022-01-26 17:47:17]
cds :
cds joined the channel.
[2022-01-26 22:04:16]
greatpanda :
greatpanda joined the channel.
[2022-01-27 09:01:42]
afarkas :
afarkas joined the channel.
[2022-01-27 11:27:51]
nemesis :
nemesis joined the channel.
[2022-01-27 23:46:08]
friedas :
friedas joined the channel.
[2022-01-28 08:19:48]
lgood1975 :
lgood1975 joined the channel.
[2022-01-29 14:06:33]
paulchen061208 :
paulchen061208 joined the channel.
[2022-01-29 15:53:51]
gargdavy :
gargdavy joined the channel.
[2022-01-29 16:16:50]
loveyou :
loveyou joined the channel.
[2022-01-29 17:19:15]
xiaohuge365 :
lixuans joined the channel.
[2022-01-29 17:48:01]
vg1vg1 :
vg1vg1 joined the channel.
[2022-01-30 01:05:12]
mod.mavic :
mod.mavic joined the channel.
[2022-01-30 05:25:38]
disturbed :
disturbed joined the channel.
[2022-01-30 11:46:57]
notreply :
notreply joined the channel.
[2022-01-30 14:57:02]
patjeutreg :
patjeutreg joined the channel.
[2022-01-31 02:21:32]
shaq48mj :
shaq48mj joined the channel.
[2022-02-01 09:22:56]
applemac :
applemac joined the channel.
[2022-02-01 17:17:40]
bhammy187 :
bhammy187 joined the channel.
[2022-02-02 06:05:43]
shaunvh :
shaunvh joined the channel.
[2022-02-04 11:56:56]
frk :
frk joined the channel.
[2022-02-04 12:07:29]
frk :
Hi can anyone provide some guidance to remove height restrictions for Matrice M600 Pro. I’ve read wiki and am familiar with mod to p4 although that was a few years ago. Tks.
[2022-02-04 12:35:38]
coldflake :
You need the firmware file that matches your current firmware and then just follow the steps in the wiki... Easy
[2022-02-06 04:34:49]
frk :
I followed the wiki. Downloaded f/w 01.00.01.65 from dank. And py files. Extracted the modules. When I run next script on .306 bin I get. “Flight controller parameters array signature not detected in input file” any assistance appreciated.
[2022-02-06 04:35:25]
frk :
I followed the wiki. Downloaded f/w 01.00.01.65 from dank. And py files. Extracted the modules. When I run next script on .306 bin I get. “Flight controller parameters array signature not detected in input file” any assistance appreciated.
[2022-02-06 23:34:41]
asdasdvoid :
asdasdvoid joined the channel.
[2022-02-08 09:11:09]
uliraudel :
uliraudel joined the channel.
[2022-02-08 19:25:57]
lezas :
lezas joined the channel.
[2022-02-09 16:39:22]
djifans :
djifans joined the channel.
[2022-02-09 18:16:14]
bepeta8783 :
bepeta8783 joined the channel.
[2022-02-09 19:10:17]
kingpin0509 :
kingpin0509 joined the channel.
[2022-02-10 14:21:52]
lver007 :
lver007 joined the channel.
[2022-02-10 15:41:38]
lver007 :
Sorry to bother, does anyone know the IP address of the mini se controller? I tried 192.168.3.10, no comms.
[2022-02-10 15:41:38]
lver007 :
Sorry to bother, does anyone know the IP address of the mini se controller?
[2022-02-10 15:41:38]
lver007 :
Sorry to bother, does anyone know the IP address of the mini se controller? I tried 192.168.3.10, no comms.
I don't have a linux pc at the moment, the power supply broke and i am struggling to replace it as OEM pc.
[2022-02-10 15:41:38]
lver007 :
Sorry to bother, does anyone know the IP address of the mini se controller? I tried 192.168.3.10, no comms.
I don't have a linux pc handy.
[2022-02-10 17:37:57]
orvillep0pc0rnwright :
orvillep0pc0rnwright joined the channel.
[2022-02-10 23:41:55]
heijningen007 :
heijningen007 joined the channel.
[2022-02-11 00:09:13]
hangtime :
hangtime joined the channel.
[2022-02-12 18:17:19]
brajabi :
brajabi joined the channel.
[2022-02-12 23:47:29]
morajabi :
morajabi joined the channel.
[2022-02-13 04:55:09]
tommyfriends :
tommyfriends joined the channel.
[2022-02-14 08:26:39]
xshl5 :
xshl5 joined the channel.
[2022-02-14 15:13:08]
j-b :
j-b joined the channel.
[2022-02-14 16:37:53]
lordhelmchen666 :
lordhelmchen666 joined the channel.
[2022-02-14 19:52:31]
jakubowski :
jakubowski joined the channel.
[2022-02-15 12:33:19]
loi000 :
loi000 joined the channel.
[2022-02-15 16:58:02]
mjnhchj :
mjnhchj joined the channel.
[2022-02-15 17:21:03]
giannich :
giannich joined the channel.
[2022-02-15 22:06:14]
dsisti :
dsisti joined the channel.
[2022-02-16 10:15:17]
uskve :
uskve joined the channel.
[2022-02-16 12:26:07]
lurker78 :
lurker78 joined the channel.
[2022-02-16 12:42:23]
lurker78 :
Hello all, I'm trying to reverse engineer the ocusync control signal. I'm mainly focused on the hopping sequence. did anyone get anywhere with that?
[2022-02-16 12:42:23]
lurker78 :
Hello all, I'm trying to reverse engineer the ocusync control signal. I'm mainly focused on the hopping sequence and how to obtain it over the air. did anyone get anywhere with that?
[2022-02-16 17:17:32]
tmbinc :
There has been some work over in #aeroscope-droneid, but not a lot of open research. I have some notes here: https://github.com/tmbinc/random/tree/master/dji/ocusync2
How far are you in your analysis?
[2022-02-16 18:10:06]
lurker78 :
There's much to be said.
for example, the different transmission pattern
[2022-02-16 18:15:27]
lurker78 :
Also, there's much discrepancy between your analysis of the DL packet structure and this image I obtained.
[2022-02-16 21:15:44]
tmbinc :
I'm sure the exact symbol scheduling is different depending on the transmission mode, bandwidth etc.; not sure how synchronization is done.
[2022-02-16 21:16:06]
tmbinc :
I'm confused by your first picture - what is the timescale, and which dimension is freq. vs time?
[2022-02-17 11:47:01]
nullrefexception :
nullrefexception joined the channel.
[2022-02-18 16:48:23]
gamolover :
gamolover joined the channel.
[2022-02-18 18:26:52]
lurker78 :
Horizontal axis is time. Timescale is 0.1 sec for all frame
[2022-02-18 18:32:35]
lurker78 :
I wonder how frequency hopping sequence is established. I have two conjectures:
1. Once rc receives drone id and validates it as its paired partner, it uses apriori formula known to both drone and rc that uses the drone id to produce the sequence.
2. Drone is constantly transmitting the info needed for the rc to follow to the next frequnecy. The rc demodulates the drone and obtains its next hop that way
[2022-02-20 07:37:43]
alxgacc :
alxgacc joined the channel.
[2022-02-20 09:36:07]
atlantic :
https://destevez.net/2022/02/demodulation-of-the-lte-uplink/
[2022-02-20 09:36:57]
atlantic :
some inspiration for ocusync decoding. it not LTE 100%.
[2022-02-20 14:50:19]
nopexecutor :
OcuSync2 DroneID has much simpler internal structure, but most of the principles of it apply also to DL signal. I did RE most of the parts of the DL (also with content decryption), but for UL I had only some initial look - only using "manually" decoded frame...
[2022-02-20 14:54:05]
nopexecutor :
In DL control signals I saw it sets the new DL freq channel, before it hops. I didn't notice such thing for UL freq/pattern, but maybe I wasn't paying attention ^^ There is still one DL sub-channel of small capacity, which I haven't properly decoded...
[2022-02-20 15:42:14]
atti :
atti joined the channel.
[2022-02-20 22:58:10]
pwin :
pwin joined the channel.
[2022-02-21 01:42:51]
simon :
simon joined the channel.
[2022-02-21 13:40:37]
alex112233 :
alex112233 joined the channel.
[2022-02-21 16:25:58]
alkobra1394 :
alkobra1394 joined the channel.
[2022-02-21 18:57:53]
rahasia :
rahasia joined the channel.
[2022-02-22 11:29:39]
xtgopl :
xtgopl joined the channel.
[2022-02-22 12:29:31]
azamir :
azamir joined the channel.
[2022-02-22 20:15:39]
villamany :
villamany joined the channel.
[2022-02-23 12:28:50]
luqasm :
luqasm joined the channel.
[2022-02-24 05:10:46]
zhangzangxu :
zhangzangxu joined the channel.
[2022-02-24 13:50:39]
igt :
igt joined the channel.
[2022-02-26 15:00:45]
khairilyazit :
khairilyazit joined the channel.
[2022-02-27 14:58:18]
dimitrios :
dimitrios joined the channel.
[2022-02-27 19:25:48]
helloeverything :
helloeverything joined the channel.
[2022-02-27 21:15:09]
nubbyskilz :
nubbyskilz joined the channel.
[2022-02-27 21:22:55]
nubbyskilz :
Can any of these hacks, bypass "the drone is bounded to another account screen. You have 5 more flights with this controller"? The old owner never removed it from his account, so now I'm stuck with a drone that will not fly... I have no way of contacting the person and cant return to seller. DJI does nothing about this, so I was somewhat trying to bypass the app account verification or disable firmware verification of some sort?
I was looking to use lucky patcher for android app, when I found there are lots of firmware patches here. [Mavic 3]
[2022-03-01 06:06:49]
areoc :
areoc joined the channel.
[2022-03-02 06:39:04]
alex1122334432 :
alex1122334432 joined the channel.
[2022-03-03 00:21:25]
spaznz :
spaznz joined the channel.
[2022-03-03 14:55:39]
gh :
ghartabc joined the channel.
[2022-03-04 04:01:23]
ys0018 :
ys0018 joined the channel.
[2022-03-04 22:39:25]
deadnull :
deadnull joined the channel.
[2022-03-05 00:01:34]
tim :
tim joined the channel.
[2022-03-07 09:46:05]
tomasz :
tomasz joined the channel.
[2022-03-08 06:20:33]
zgvs2 :
zgvs2 joined the channel.
[2022-03-08 07:00:29]
dakilla :
dakilla joined the channel.
[2022-03-08 23:11:47]
rhys :
rhys joined the channel.
[2022-03-09 09:14:49]
mm2freak222 :
mm2freak222 joined the channel.
[2022-03-09 20:11:22]
ma89to :
ma89to joined the channel.
[2022-03-10 14:17:12]
danny73 :
danny73 joined the channel.
[2022-03-10 16:30:45]
tonyphx :
tonyphx joined the channel.
[2022-03-11 04:45:53]
kapdap :
kapdap joined the channel.
[2022-03-11 21:21:31]
gariful :
gariful joined the channel.
[2022-03-12 00:14:45]
cybercrime :
cybercrime joined the channel.
[2022-03-12 04:14:33]
omega_8697 :
omega_8697 joined the channel.
[2022-03-12 23:22:17]
ahrob :
ahrob joined the channel.
[2022-03-13 12:57:47]
lhgeo :
lhgeo joined the channel.
[2022-03-13 19:43:55]
limegreenindigo1 :
limegreenindigo1 joined the channel.
[2022-03-14 01:35:50]
djirevflame :
djirevflame joined the channel.
[2022-03-14 10:27:36]
kk246 :
kk246 joined the channel.
[2022-03-14 11:05:39]
return97321 :
return97321 joined the channel.
[2022-03-15 02:57:09]
revolution :
revolution joined the channel.
[2022-03-15 04:59:09]
valtgun :
valtgun joined the channel.
[2022-03-15 07:44:05]
redcolorado21 :
redcolorado21 joined the channel.
[2022-03-15 13:46:20]
duc34 :
duc34 joined the channel.
[2022-03-15 16:22:48]
ufofafa :
ufofafa joined the channel.
[2022-03-15 23:33:41]
j22 :
j22 joined the channel.
[2022-03-16 16:02:00]
gmsn5555 :
gmsn5555 joined the channel.
[2022-03-18 00:18:46]
hilux :
hilux joined the channel.
[2022-03-18 03:25:19]
m600rro :
m600rro joined the channel.
[2022-03-18 11:52:28]
pxesrv :
pxesrv joined the channel.
[2022-03-18 15:10:15]
daly :
daly joined the channel.
[2022-03-18 20:32:40]
w0h :
Beginner question: Can someone explain why strings in TAs are suffixed with the function name they appear in and then memcpy'd to truncate the suffix? I can't find a good reason why this is so.
[2022-03-18 20:32:40]
w0h :
Beginner question: Can someone explain why some strings in TAs are suffixed with the function name they appear in and then memcpy'd to truncate the suffix? I can't find a good reason why this is so.
[2022-03-19 00:11:21]
dennis :
dennis joined the channel.
[2022-03-19 00:13:12]
mr_andersson :
Is it possible to flash goggles v2 without using DJI assistant? I want to upgrade to v01.02.0001 because I have the reboot issue but DJI removed everything except the anti-rollback firmware from the assistant. I have the bin file from DDD but what flashing software do I need?
[2022-03-19 00:14:06]
cs2000 :
sadly none that im aware of
[2022-03-19 00:53:53]
joonas :
@mr_andersson if you switch to dji fpv system mode (what we call diy mode) then you can flash to 0606 which also has those problems fixed.
[2022-03-19 00:53:53]
joonas :
@mr_andersson if you switch to dji fpv mode (what we call diy mode) then you can flash to 0606 which also has those problems fixed.
[2022-03-19 00:53:53]
joonas :
@mr_andersson if you switch to dji digital fpv system mode (what we call diy mode) then you can flash to 0606 which also has those problems fixed.
[2022-03-19 00:55:28]
joonas :
there's two different sets of firmwares for the v2s depending on which mode you're booted to while flashing. it's a mess.
[2022-03-19 00:56:19]
joonas :
settings -> about -> last menu entry -> power cycle
[2022-03-19 00:56:40]
joonas :
this is for flying with custom build quads and the air unit / caddx vista transmitter.
[2022-03-19 00:56:52]
joonas :
no custom flashing tool atm for v2s yeah.
[2022-03-19 00:58:51]
joonas :
it'll still also give you a newer version of the dji fpv drone fw compared to stock.
[2022-03-19 00:58:53]
mr_andersson :
I already have 0606 in DIY mode but the goggles are randomly rebooting so I assumed I also needed .0001 for the v2 firmware side.
[2022-03-19 00:59:45]
joonas :
ah, no. so it's two different fw package lines depending on where you flash from but they both include both modes. 0606 should be stable, that's really weird.
[2022-03-19 01:00:34]
mr_andersson :
oh ok, guess I could try reflashing 0606 just in case something went wrong last time
[2022-03-19 01:26:47]
kiwi :
kiwi joined the channel.
[2022-03-19 04:16:06]
velhojow :
velhojow joined the channel.
[2022-03-19 05:45:50]
mrbou :
mrbou joined the channel.
[2022-03-20 03:17:50]
ashen :
ashen joined the channel.
[2022-03-20 03:48:52]
ashen :
hi all, I'm a newbie to drone stuffs but looking to mess around with a new-old drone (new to me; probably an older model to start). Was wondering, as I browse around ebay or whatever for something to get, is there someplace that has like a graph that shares what's possible with what models and what software is associated (like DJI GO, Assistant 2, etc.)? Was just thinking if I could look at a quick graph to see what was possible and estimate the work, that might be nice, but I might be asking for too much. :sweat_smile:
[2022-03-20 03:50:28]
ashen :
For instance, I see a lot of guides for the Mavic series, but know someone who might be willing to part with their Phantom 2 for cheap... wondering if cheap will lead me to more trouble than it's worth
[2022-03-20 03:53:33]
ashen :
I watched [this guide](https://www.youtube.com/watch?v=H2d784lgtuA) which included a Phantom 4, but presumably the Phantom 2 has different FW and requires different methods for changing some of these settings. How different and which settings? hard to tell even after reading through some of the docs on the dji-rev site...
[2022-03-20 03:56:00]
ashen :
Any suggestions are appreciated... including a rtfm if I've missed the docs somewhere
[2022-03-20 04:00:01]
ashen :
I may actually have partially answered my own question. For others' benefit... these folks do the work for you, but also provide a nice [mapping](https://nolimitdronez.com/birdmap) of features to FW by model.
[2022-03-20 04:00:29]
ashen :
I want to play with it myself, but that's a nice reference.
[2022-03-20 06:15:11]
oakley75 :
P2 is pretty dang open. It'd be a great start friend.
[2022-03-20 06:56:27]
ashen :
Glad to hear that news! Thanks @oakley75!
[2022-03-20 07:22:43]
zwon :
zwon joined the channel.
[2022-03-20 14:00:09]
rudrasama :
rudrasama joined the channel.
[2022-03-20 14:02:10]
rudrasama :
is it possible to disable hardware pairing in Mavic 2 Air??
[2022-03-20 15:23:26]
weimings :
weimings joined the channel.
[2022-03-20 20:19:46]
hrisfpv :
hrisfpv joined the channel.
[2022-03-21 09:25:06]
ggonzalez :
ggonzalez joined the channel.
[2022-03-21 09:34:36]
ggonzalez :
Hello everyone
[2022-03-21 09:35:27]
ggonzalez :
Do you know if there is a available toolchain for the Mavic Pro? I need to compile a couple apps
[2022-03-21 10:10:46]
joonas :
not sure about mavic pro specifically, but usually it's some version of the android ndk?
[2022-03-21 10:10:53]
joonas :
if the mavic userland is anything like the fpv stuff.
[2022-03-21 10:28:27]
ggonzalez :
I am not familiar with FPV but yeah it's android based
[2022-03-21 10:29:18]
ggonzalez :
the idea would be get the right toolchian so I can crosscompile and maybe statically link it if necessary
[2022-03-21 10:30:20]
joonas :
i just use the latest android ndk from google targeting android-23 i think?
[2022-03-21 10:30:35]
joonas :
you can poke around the device to see which android sdk version it targets
[2022-03-21 10:31:11]
joonas :
check out my doom port for the fpv goggles: https://github.com/fpv-wtf/dfbdoom/blob/main/jni/Android.mk
[2022-03-21 10:31:11]
joonas :
check out my doom port for the fpv goggles: https://github.com/fpv-wtf/dfbdoom/blob/main/jni/Android.mk#L18
[2022-03-21 10:35:38]
ggonzalez :
hey, that's pretty awesome!
[2022-03-21 10:37:58]
ggonzalez :
[2022-03-21 10:38:19]
ggonzalez :
I will check this and see where I get. Thank you!
[2022-03-21 10:40:25]
joonas :
i set everything up so ndk-build does the heavy lifting for me, but i imagine you can also use the compiler and linker included in the ndk directly as well.
[2022-03-21 10:41:18]
joonas :
gotta run, good luck, have fun
[2022-03-21 10:50:44]
tommo :
tommo joined the channel.
[2022-03-21 20:58:20]
ci0c4n3l :
ci0c4n3l joined the channel.
[2022-03-22 12:34:39]
jolan :
jolan joined the channel.
[2022-03-22 16:42:42]
ferry :
ferry joined the channel.
[2022-03-23 00:20:47]
farken :
farken joined the channel.
[2022-03-23 01:04:10]
zrs :
zrs joined the channel.
[2022-03-23 09:59:55]
davinchi :
davinchi joined the channel.
[2022-03-23 13:52:42]
w0h :
Does anyone know what exeactly the purpose of the FreeRTOS system in recent drones is and how it is connected to the flight controller?
[2022-03-23 13:52:42]
w0h :
Does anyone know what exeactly the purpose of the FreeRTOS system in recent drones is and how it is connected to the flight controller firmware?
[2022-03-23 13:52:42]
w0h :
Does anyone know what the purpose of the FreeRTOS system in recent drones is and how it is connected to the flight controller firmware?
[2022-03-23 14:49:05]
icer :
icer joined the channel.
[2022-03-23 15:34:26]
joonas :
@w0h the CP RTOS that's on the DJI FPV (and the DIY FPV gear) - an probably more devices - on the P1 chip is sort of a 4G baseband + video encode/decode pipeline. not sure if it's what you're refering to.
[2022-03-23 15:35:23]
joonas :
on the DJI FPV it's on it's own SOC basically and the FC is on another one entirely.
[2022-03-23 15:35:23]
joonas :
on the DJI FPV it's on it's own SOC basically.
[2022-03-23 15:35:23]
joonas :
on the DJI FPV it's on it's own SOC basically and the FC is on another one entirely.
[2022-03-23 15:45:22]
w0h :
@joonas Thanks, I am not sure if I refer to this one. The FreeRTOS is located in the 0801 image in rtos.img. The strings suggest it might have something to do with the intelligent flight modes and collision prevention. I thought this is also handled by the flight controller but maybe that's were I was wrong.
[2022-03-23 15:48:15]
joonas :
i think we're talking about two different rtos-s. the one i've been looking at lives in cp.img.
[2022-03-23 15:48:15]
joonas :
i think we're talking about two different rtos-s. the one i've been looking at lives in cp.img and has nothing to do with actual flight.
[2022-03-23 16:19:58]
tmbinc :
Which recent drone still has 0801?
[2022-03-23 16:19:58]
tmbinc :
Which recent dron still has 0801?
[2022-03-23 16:20:20]
tmbinc :
Last I've seen it was for WM247, which was still an Eagle-based drone
[2022-03-23 16:21:45]
tmbinc :
Nevermind, I'm just stupid
[2022-03-23 16:23:08]
tmbinc :
I see what you mean - that RTOS runs on the A-core, but does flight-critical things like collision avoidance and visual positioning
[2022-03-23 16:24:02]
tmbinc :
So it handles the low-res cameras and time-of-flight sensors
[2022-03-23 16:47:06]
w0h :
Perfect, thanks!
[2022-03-24 00:03:31]
anethema :
anethema joined the channel.
[2022-03-24 03:23:06]
kenhuyang :
kenhuyang joined the channel.
[2022-03-24 08:46:05]
thatdroneguy-uk :
thatdroneguy-uk joined the channel.
[2022-03-24 13:14:21]
niklas2310 :
niklas2310 joined the channel.
[2022-03-24 18:21:19]
hhh :
hhh joined the channel.
[2022-03-24 18:25:20]
rockl :
rockl joined the channel.
[2022-03-24 19:25:14]
ninthbit :
ninthbit joined the channel.
[2022-03-25 04:58:09]
rockl :
I have a Mavic 2 core board that will not bind to any remote control or Smart Controller.
[2022-03-25 04:58:09]
rockl :
I have a Mavic 2 core board that will not bind to any remote control or Smart Controller. Using DJI Assistant 2 I am able to refresh the current firmware version, or downgrade to any version with no problem. I've tried disconnecting all connectors from the board except the ESC, with the same results. I've also tried replacing the GPS+IMU, all ribbon cables, camera, and ESC. The binding LED seems to function properly as well. It's green until I hit the bind button, but it's never recognized by the remote/smart controller. Doe the core WM240 core board have a hardware reset capability?
[2022-03-25 04:58:09]
rockl :
I have a Mavic 2 core board that will not bind to any remote control or Smart Controller. Using DJI Assistant 2 I am able to refresh the current firmware version, or downgrade to any version with no problem. I've tried disconnecting all connectors from the board except the ESC, with the same results. I've also tried replacing the GPS+IMU, all ribbon cables, camera, and ESC. The binding LED seems to function properly as well. It's green until it turns red after I press the bind button, but it's never recognized by the remote/smart controller. Does the WM240 core board have a hardware reset capability?
[2022-03-25 07:00:29]
radekkk :
radekkk joined the channel.
[2022-03-25 08:18:20]
apaczenko1993 :
apaczenko1993 joined the channel.
[2022-03-25 12:39:12]
jjuk :
jjuk joined the channel.
[2022-03-25 13:47:24]
mavic2reverser :
Do you have adb root on the core board? If so, dji left some helpful controller pairing test scripts on there you can try out
[2022-03-25 13:47:47]
mavic2reverser :
At least give you something more to debug
[2022-03-25 16:28:43]
naits5 :
naits5 joined the channel.
[2022-03-25 20:32:14]
cs2002 :
cs2002 joined the channel.
[2022-03-25 21:45:42]
faineg :
faineg joined the channel.
[2022-03-25 23:11:18]
benno89 :
benno89 joined the channel.
[2022-03-26 02:04:46]
dwrice0 :
dwrice0 joined the channel.
[2022-03-26 11:42:48]
shiftag :
shiftag joined the channel.
[2022-03-26 16:39:48]
hostile :
hostile joined the channel.
[2022-03-27 00:39:27]
patiko :
patiko joined the channel.
[2022-03-27 02:22:44]
shuke :
shuke joined the channel.
[2022-03-27 05:09:50]
senseisean :
senseisean joined the channel.
[2022-03-27 21:51:47]
artoleus :
artoleus joined the channel.
[2022-03-28 09:18:00]
sp4feu :
sp4feu joined the channel.
[2022-03-28 14:51:32]
djimaster :
djimaster joined the channel.
[2022-03-28 16:49:59]
rockl :
Thanks for the suggestion. I don't have the core board rooted yet. I look for that script. Is it best to do that kind of access while connected to an ECU, or is it possible to power the core board through direct power instead?
[2022-03-28 16:49:59]
rockl :
Thanks for the suggestion. I don't have the core board rooted yet. I'll look around for that script. Is it best to do that kind of access while connected to an ECU, or is it possible to power the core board through direct power instead?
[2022-03-28 16:50:42]
hostile :
in the past I've used core boards on direct power removed from drone
[2022-03-28 16:50:51]
hostile :
just need fan on CPUs for overheating
[2022-03-28 16:51:03]
rockl :
Makes sense. Thanks!
[2022-03-28 17:14:44]
droneuser :
@biosblob left the channel.
[2022-03-29 08:35:05]
jackmax :
jackmax joined the channel.
[2022-03-29 10:41:14]
w4ts0n :
w4ts0n joined the channel.
[2022-03-29 11:30:57]
w4ts0n :
hey guys, i try to unpack the 0306 FW modul from a Mini 2. Using dji_imah_fwsig the decryption works, but the resulting binary for the 0306 module seems still encrypted or encoded. I checked the file with an hex viewer and there are the magic "xV4" after the first 5 bytes. I tested the "dji_xv4_fwcon" script but that also not worked. Can someone give me an advice how to unpack that modul?
[2022-03-29 12:06:05]
tmbinc :
It is encrypted with a fused key in the iMXRT1064, which I haven't been able to extract.
[2022-03-29 12:06:13]
tmbinc :
(They use the bus encryption engnie)
[2022-03-29 12:07:27]
tmbinc :
So there's no known tool to decrypt it
[2022-03-29 12:07:36]
tmbinc :
But it can be dumped from a drone
[2022-03-29 12:22:48]
flyte9 :
flyte9 joined the channel.
[2022-03-29 12:56:08]
ucusdyuxljbqrlc :
ucusdyuxljbqrlc joined the channel.
[2022-03-30 01:25:06]
rockl :
Ok, next question. What is the best way to adb root a WM240 core board? I tried SUMLdorev2, dumlracer and a couple other tools, but none seem to have the ability to support adb shell access.
[2022-03-30 01:30:43]
mavic2reverser :
What firmware version? Dronehacks I think has support for .100, otherwise you need to find your own exploit
[2022-03-30 10:12:14]
yuzii :
yuzii joined the channel.
[2022-03-30 10:19:31]
demion :
demion joined the channel.
[2022-03-30 11:02:00]
windoze :
windoze joined the channel.
[2022-03-30 13:26:25]
albertoe :
albertoe joined the channel.
[2022-03-30 16:02:05]
icem4n :
icem4n joined the channel.
[2022-03-31 02:31:16]
pj199407123 :
pj199407123 joined the channel.
[2022-03-31 03:19:18]
rflagg :
rflagg joined the channel.
[2022-03-31 23:13:12]
glados :
glados joined the channel.
[2022-04-01 08:37:24]
finnik :
finnik joined the channel.
[2022-04-01 16:02:58]
fil007 :
fil007 joined the channel.
[2022-04-01 19:48:59]
rebellion :
rebellion joined the channel.
[2022-04-01 23:09:31]
adi8421 :
adi8421 joined the channel.
[2022-04-02 05:39:30]
mike.bincher :
mike.bincher joined the channel.
[2022-04-02 07:23:22]
endever :
endever joined the channel.
[2022-04-02 09:14:24]
zephyr :
zephyr joined the channel.
[2022-04-03 14:55:52]
ronykom :
ronykom joined the channel.
[2022-04-03 22:22:42]
john_duff :
john_duff joined the channel.
[2022-04-04 09:30:25]
argonaut :
argonaut joined the channel.
[2022-04-04 11:02:58]
john_duff :
Hello !
I need a little help, as I'm struggling with a Mavic Pro WM220 with a gimbal that goes N/A after a few minutes of uptime. Image is ok. Gimbal seems to work. It moves when I tilt the drone. Tilting from RC works too. Front and bottom hazcams work and their calibration is functional.
When gimbal ceases to be recognized by the app, so does the SDcard, while still being mounted when I plug the USB cable (so no issue with the card. it works on another WM220).
Drone history is unknown. When I replaced the gimbal ribbon, I noticed that it had been previously replaced, as the black rubber sealant was already cut.
I tried comm_og_service_tool.py GimbalCalib JointCoarse and LinearHall. All I get is "Received unrelated packet" lines.
I opened recent logs in wireshark, and I noticed that for a few lines, "protocol version" is quite different.
Is there a possibility that the previous owner swapped Gimbal Sensor Control board with an unmatched firmware, leading to the issue I have ? If this is the case, I can incrementally flash every known firmware version (as there is a finite number of them) starting with the earliest until I have a match.
What can you guys advise to do or to check ?
Regards
[2022-04-04 13:12:57]
n4tri0s :
n4tri0s joined the channel.
[2022-04-04 15:51:04]
sdfsf :
hacker_07 joined the channel.
[2022-04-04 16:13:55]
sdfsf :
@test_crack left the channel.
[2022-04-05 04:48:21]
verdi08 :
verdi08 joined the channel.
[2022-04-05 07:06:41]
przemo-c :
przemo-c joined the channel.
[2022-04-05 09:40:28]
ibnaz :
ibnaz joined the channel.
[2022-04-05 20:38:55]
ub3rus :
ub3rus joined the channel.
[2022-04-06 02:32:13]
darius :
darius joined the channel.
[2022-04-06 05:14:47]
jasper27 :
jasper27 joined the channel.
[2022-04-06 12:46:57]
blzxgy :
blzxgy joined the channel.
[2022-04-06 12:49:43]
blzxgy :
EVO2 PRO 6K NEW BIN FREE
[2022-04-06 15:30:45]
dji4__ :
dji4__ joined the channel.
[2022-04-06 16:06:36]
sdfsf :
sdfsf joined the channel.
[2022-04-06 17:38:18]
quad_fan :
quad_fan joined the channel.
[2022-04-07 01:40:06]
cha :
cha joined the channel.
[2022-04-07 07:35:58]
goguma :
goguma joined the channel.
[2022-04-07 09:13:23]
drev :
drev joined the channel.
[2022-04-07 09:54:28]
tho :
tho joined the channel.
[2022-04-07 10:25:38]
sample :
sample joined the channel.
[2022-04-08 07:59:06]
hiddentty :
hiddentty joined the channel.
[2022-04-08 08:50:20]
damirbulich :
damirbulich joined the channel.
[2022-04-08 09:34:49]
andrewbboo :
andrewbboo joined the channel.
[2022-04-08 14:52:31]
proto :
proto joined the channel.
[2022-04-08 15:04:20]
dragorn :
dragorn joined the channel.
[2022-04-09 03:41:55]
barrycarlton :
barrycarlton joined the channel.
[2022-04-09 07:26:03]
passiewaterm :
passiewaterm joined the channel.
[2022-04-09 17:57:35]
herasymyuk :
herasymyuk joined the channel.
[2022-04-10 17:15:51]
maliburod :
maliburod joined the channel.
[2022-04-11 05:13:11]
qq2921635643 :
qq2921635643 joined the channel.
[2022-04-11 06:41:40]
sualfred :
sualfred joined the channel.
[2022-04-11 10:56:44]
kirill17 :
kirill17 joined the channel.
[2022-04-11 14:08:27]
gokhankaraoglu :
gokhankaraoglu joined the channel.
[2022-04-12 03:22:48]
prz3mk0 :
prz3mk0 joined the channel.
[2022-04-12 05:06:33]
alxgacc :
alxgacc joined the channel.
[2022-04-12 05:55:18]
alxgacc :
alxgacc joined the channel.
[2022-04-12 05:58:33]
alxgacc :
alxgacc joined the channel.
[2022-04-12 07:30:56]
eingin :
eingin joined the channel.
[2022-04-12 10:14:43]
djimaster :
Is there any solution for Mavic Air1 Gimbal Camera Sensor Activation ?
[2022-04-12 12:58:34]
joh :
joh joined the channel.
[2022-04-12 13:00:11]
skynet :
skynet joined the channel.
[2022-04-12 13:04:06]
conchimnon :
conchimnon joined the channel.
[2022-04-12 13:15:47]
wechdamit :
wechdamit joined the channel.
[2022-04-14 13:48:56]
zgmtlc :
zgmtlc joined the channel.
[2022-04-14 16:59:47]
walter.kurzerler :
walter.kurzerler joined the channel.
[2022-04-14 18:01:56]
alokozam :
alokozam joined the channel.
[2022-04-14 23:37:31]
the_old_man :
the_old_man joined the channel.
[2022-04-15 18:53:13]
schmoo2k :
schmoo2k joined the channel.
[2022-04-16 03:57:52]
oberon :
oberon joined the channel.
[2022-04-17 15:00:40]
lawyerst :
lawyerst joined the channel.
[2022-04-17 18:43:37]
maxmeda80 :
maxmeda80 joined the channel.
[2022-04-18 00:27:32]
lmore377 :
lmore377 joined the channel.
[2022-04-18 06:07:55]
lee0312 :
lee0312 joined the channel.
[2022-04-19 07:54:40]
retina :
retina joined the channel.
[2022-04-19 18:19:00]
dronez4u :
dronez4u joined the channel.
[2022-04-19 20:42:19]
xtravbx :
xtravbx joined the channel.
[2022-04-20 02:20:37]
kiangsi :
kiangsi joined the channel.
[2022-04-20 13:06:08]
tics :
tics joined the channel.
[2022-04-20 14:40:54]
rzd66840 :
rzd66840 joined the channel.
[2022-04-20 21:42:06]
wavesahead :
wavesahead joined the channel.
[2022-04-21 02:22:45]
anthony :
anthony joined the channel.
[2022-04-21 04:47:35]
jjbyrnes29 :
jjbyrnes29 joined the channel.
[2022-04-21 19:27:43]
emeraldmaster :
emeraldmaster joined the channel.
[2022-04-22 08:26:09]
zhfdjy :
zhfdjy joined the channel.
[2022-04-22 14:55:43]
easyjet :
easyjet joined the channel.
[2022-04-22 15:49:46]
scanf :
scanf joined the channel.
[2022-04-23 06:14:24]
superlogical :
superlogical joined the channel.
[2022-04-23 13:56:47]
ostap :
ostap joined the channel.
[2022-04-23 16:07:31]
bobboynton :
bobboynton joined the channel.
[2022-04-25 09:19:34]
bamboo :
panda joined the channel.
[2022-04-25 11:45:35]
alexpro :
alexpro joined the channel.
[2022-04-25 13:52:54]
pinejuice :
pinejuice joined the channel.
[2022-04-25 23:58:27]
wipeout :
wipeout joined the channel.
[2022-04-26 19:03:16]
dariwonka :
dariwonka joined the channel.
[2022-04-26 19:39:08]
randersen :
randersen joined the channel.
[2022-04-26 19:48:34]
cecca89 :
cecca89 joined the channel.
[2022-04-27 03:39:33]
tmwsiy :
tmwsiy joined the channel.
[2022-04-27 09:59:25]
ndtecnico :
ndtecnico joined the channel.
[2022-04-27 12:19:14]
wllbll :
wllbll joined the channel.
[2022-04-27 17:48:08]
cruonline :
!fw
[2022-04-29 09:01:28]
sterillium :
sterillium joined the channel.
[2022-04-29 13:37:37]
polarfly :
how to externally power the board?
[2022-04-29 14:03:03]
hostile :
solder battery connector onto positive and negative pads on PCB
[2022-04-29 20:04:56]
james0d0a :
james0d0a joined the channel.
[2022-04-30 00:44:58]
jack117wb :
jack117wb joined the channel.
[2022-04-30 17:14:28]
templvr :
templvr joined the channel.
[2022-05-01 20:51:47]
marfi :
marfi joined the channel.
[2022-05-02 03:38:00]
rbq :
rbq joined the channel.
[2022-05-02 06:02:45]
beerabbit :
beerabbit joined the channel.
[2022-05-02 12:23:45]
dr0n3k1d :
dr0n3k1d joined the channel.
[2022-05-03 10:04:12]
fesli :
fesli joined the channel.
[2022-05-03 16:50:42]
valkyrie :
valkyrie joined the channel.
[2022-05-03 17:56:48]
nmikus :
nmikus joined the channel.
[2022-05-04 01:53:41]
johnnieboi77 :
johnnieboi77 joined the channel.
[2022-05-04 05:56:04]
gerdp :
gerdp joined the channel.
[2022-05-04 09:00:36]
jgb323 :
jgb323 joined the channel.
[2022-05-04 15:13:32]
amh :
amh joined the channel.
[2022-05-05 04:25:50]
matty :
matty joined the channel.
[2022-05-05 15:32:54]
spacealien :
spacealien joined the channel.
[2022-05-05 20:09:32]
item1979 :
item1979 joined the channel.
[2022-05-05 22:41:50]
helpmetom :
helpmetom joined the channel.
[2022-05-06 00:24:33]
jacko :
jacko joined the channel.
[2022-05-06 20:46:21]
flyingsnoopy :
flyingsnoopy joined the channel.
[2022-05-07 15:37:01]
gujaratgary :
gujaratgary joined the channel.
[2022-05-07 18:03:09]
melk :
melk joined the channel.
[2022-05-08 01:49:45]
ttmonster :
djmonster joined the channel.
[2022-05-08 21:50:37]
bradferd84 :
bradferd84 joined the channel.
[2022-05-09 09:31:08]
button :
button joined the channel.
[2022-05-10 02:38:07]
imba_dark :
imba_dark joined the channel.
[2022-05-10 05:36:57]
aravinthaara :
aravinthaara joined the channel.
[2022-05-10 14:56:58]
teko :
teko joined the channel.
[2022-05-10 16:24:51]
brumbassen :
brumbassen joined the channel.
[2022-05-10 20:18:26]
disposalone :
disposalone joined the channel.
[2022-05-11 10:36:39]
zorast :
zorast joined the channel.
[2022-05-11 21:43:08]
oldpilot :
oldpilot joined the channel.
[2022-05-11 21:51:43]
skeye :
skeye joined the channel.
[2022-05-11 21:55:46]
skeye :
I'm looking into buying a new drone. My main concern is something that doesn't show up on Aeroscope. Autel has been considered, but I read too many about (small) bugs (which still hasn't been fixed to this day) to justify it's pricetag. Which DJI drones do have 'custom' firmwares available and / or are able to disable Aeroscope that way?
[2022-05-11 21:56:37]
skeye :
I looked into the rooted core board of NLD; but that just changes the S/N of the drone to a bunch of zeroes (which would even attract more attention popping up on the radar)
[2022-05-11 21:57:55]
skeye :
If there is a specific model with 'good' support and pre-existing modified firmwares, I would like to know
[2022-05-12 08:40:24]
sequel :
sequel joined the channel.
[2022-05-12 09:53:30]
kaplandigital :
kaplandigital joined the channel.
[2022-05-12 10:46:48]
plcybek :
plcybek joined the channel.
[2022-05-12 11:46:12]
kettlebells :
kettlebells joined the channel.
[2022-05-12 17:54:40]
testuser00001 :
testuser00001 joined the channel.
[2022-05-12 18:17:09]
h_marshall :
h_marshall joined the channel.
[2022-05-12 20:28:09]
richtrmg :
richtrmg joined the channel.
[2022-05-13 04:08:14]
eseven :
eseven joined the channel.
[2022-05-13 04:59:33]
djimavicair :
djimavicair joined the channel.
[2022-05-13 08:36:22]
robthomas1 :
robthomas1 joined the channel.
[2022-05-13 12:25:13]
asae2207 :
asae2207 joined the channel.
[2022-05-13 14:39:34]
upstep :
upstep joined the channel.
[2022-05-13 22:24:16]
luyang :
luyang joined the channel.
[2022-05-14 06:10:22]
bella :
bella joined the channel.
[2022-05-14 06:25:54]
harishpillay :
harishpillay joined the channel.
[2022-05-14 09:12:09]
technical14 :
technical14 joined the channel.
[2022-05-14 18:50:01]
djixx :
djixx joined the channel.
[2022-05-14 22:18:35]
bri3d :
bri3d joined the channel.
[2022-05-16 10:26:52]
dronedog :
dronedog joined the channel.
[2022-05-16 17:18:54]
d3vl_jack :
d3vl_jack joined the channel.
[2022-05-16 17:29:34]
smicbee :
smicbee joined the channel.
[2022-05-16 17:30:38]
dtoad1345 :
dtoad1345 joined the channel.
[2022-05-16 19:06:26]
andreg-soares :
andreg-soares joined the channel.
[2022-05-16 22:26:52]
panzers3 :
airvelations joined the channel.
[2022-05-17 12:30:23]
pelfed :
pelfed joined the channel.
[2022-05-17 16:33:45]
toko :
toko joined the channel.
[2022-05-18 02:47:18]
greenpizza12 :
greenpizza12 joined the channel.
[2022-05-19 11:11:33]
askeloduh :
askeloduh joined the channel.
[2022-05-20 01:13:47]
thenameth :
thenameth joined the channel.
[2022-05-20 04:06:36]
pepermant :
pepermant joined the channel.
[2022-05-21 15:00:19]
marcosci :
marcosci joined the channel.
[2022-05-21 21:49:57]
aircruiser :
aircruiser joined the channel.
[2022-05-21 22:10:55]
trevor :
trevor joined the channel.
[2022-05-22 17:24:27]
mat213 :
mat213 joined the channel.
[2022-05-23 09:20:40]
hezerlight :
hezerlight joined the channel.
[2022-05-23 11:15:04]
bod :
bodopo joined the channel.
[2022-05-23 14:03:45]
mthurma7 :
mthurma7 joined the channel.
[2022-05-23 23:47:31]
bzyku69 :
bzyku69 joined the channel.
[2022-05-23 23:55:01]
hoelibardolaza :
hoelibardolaza joined the channel.
[2022-05-24 10:26:18]
frontier :
frontier joined the channel.
[2022-05-24 18:33:32]
a963892287 :
a963892287 joined the channel.
[2022-05-24 18:43:15]
devdriver :
devdriver joined the channel.
[2022-05-24 20:57:12]
oxolot :
oxolot joined the channel.
[2022-05-25 01:49:45]
d3r1ck84 :
d3r1ck84 joined the channel.
[2022-05-25 03:28:50]
crotus :
crotus joined the channel.
[2022-05-25 05:58:26]
battery13v :
battery13v joined the channel.
[2022-05-25 08:19:33]
n1ptune :
n1ptune joined the channel.
[2022-05-25 12:59:40]
squeck :
squeck joined the channel.
[2022-05-25 21:43:49]
dreamer :
dreamer joined the channel.
[2022-05-25 23:25:35]
graf :
graf joined the channel.
[2022-05-26 03:29:17]
merlin :
merlin joined the channel.
[2022-05-26 06:25:14]
smerc :
smerc joined the channel.
[2022-05-26 09:14:49]
my_max :
my_max joined the channel.
[2022-05-26 13:13:42]
wo1fy :
wo1fy joined the channel.
[2022-05-26 15:52:39]
carstian :
carstian joined the channel.
[2022-05-27 11:58:53]
talal916 :
talal916 joined the channel.
[2022-05-28 02:10:44]
milo :
milo joined the channel.
[2022-05-28 02:36:53]
user1832491823 :
user1832491823 joined the channel.
[2022-05-28 05:32:12]
alex1981 :
alex1981 joined the channel.
[2022-05-28 09:27:31]
batko001 :
batko001 joined the channel.
[2022-05-28 23:50:41]
jcga :
jcga joined the channel.
[2022-05-29 01:41:34]
ttp499 :
ttp499 joined the channel.
[2022-05-30 07:28:30]
theogene :
theogene joined the channel.
[2022-05-31 08:03:58]
theufodroner :
theufodroner joined the channel.
[2022-05-31 10:26:39]
ianni992 :
ianni992 joined the channel.
[2022-05-31 14:20:09]
pinguinchik :
pinguinchik joined the channel.
[2022-05-31 21:55:42]
ciangh :
ciangh joined the channel.
[2022-06-02 13:02:42]
cedivad :
cedivad joined the channel.
[2022-06-03 21:23:07]
east2west :
east2west joined the channel.
[2022-06-04 16:51:37]
gummo99 :
gummo99 joined the channel.
[2022-06-04 21:11:59]
uriab :
uriab joined the channel.
[2022-06-05 08:21:29]
harryemery92 :
harryemery92 joined the channel.
[2022-06-05 11:01:44]
high-hand :
high-hand joined the channel.
[2022-06-05 11:28:04]
toto71 :
toto71 joined the channel.
[2022-06-05 16:21:54]
laen :
laen joined the channel.
[2022-06-05 21:19:24]
szczuffun :
szczuffun joined the channel.
[2022-06-06 09:32:25]
bomegyqi :
bomegyqi joined the channel.
[2022-06-06 16:51:46]
raffaellokwos :
raffaellokwos joined the channel.
[2022-06-07 07:45:29]
svarteld :
svarteld joined the channel.
[2022-06-07 23:03:37]
bora :
bora joined the channel.
[2022-06-08 02:30:39]
cyberid10t :
id10t joined the channel.
[2022-06-08 03:09:29]
lefeng :
lefeng joined the channel.
[2022-06-09 14:23:17]
user1832491823 :
user1832491823 joined the channel.
[2022-06-09 14:23:45]
user1832491823 :
user1832491823 joined the channel.
[2022-06-09 14:40:51]
efwefaf :
efwefaf joined the channel.
[2022-06-09 16:30:23]
emilitosaid :
emilitosaid joined the channel.
[2022-06-10 07:45:54]
x_tino :
x_tino joined the channel.
[2022-06-10 08:02:06]
tiara :
tiara joined the channel.
[2022-06-10 21:48:16]
cannibalform :
cannibalform joined the channel.
[2022-06-11 04:22:22]
choppa667 :
choppa667 joined the channel.
[2022-06-11 07:47:16]
justbenh :
justbenh joined the channel.
[2022-06-11 18:08:14]
gianluk81 :
gianluk81 joined the channel.
[2022-06-11 19:52:09]
ilgianka :
ilgianka joined the channel.
[2022-06-11 20:10:09]
kruncha :
kruncha joined the channel.
[2022-06-12 18:38:35]
primarydisorder :
primarydisorder joined the channel.
[2022-06-13 02:38:44]
zhaohongguang :
zhaohongguang joined the channel.
[2022-06-13 04:16:21]
deathcool :
deathcool joined the channel.
[2022-06-13 19:37:37]
rrcoolh :
rrcoolh joined the channel.
[2022-06-13 22:35:05]
aprentis :
aprentis joined the channel.
[2022-06-14 14:47:04]
fr3style :
fr3style joined the channel.
[2022-06-15 05:44:11]
xy4453680 :
xy4453680 joined the channel.
[2022-06-16 03:29:22]
hackdji :
hackdji joined the channel.
[2022-06-16 07:13:19]
jexy :
jexy joined the channel.
[2022-06-16 12:41:35]
quagmire :
quagmire joined the channel.
[2022-06-16 13:35:27]
tonygra :
tonygra joined the channel.
[2022-06-16 18:01:10]
highlander :
highlander joined the channel.
[2022-06-18 11:40:15]
kinev1337 :
kinev1337 joined the channel.
[2022-06-19 06:35:01]
davidorlandbrown :
davidorlandbrown joined the channel.
[2022-06-19 07:26:23]
dreamer :
@dreamer left the channel.
[2022-06-19 11:24:35]
enwineer :
enwineer joined the channel.
[2022-06-20 06:25:51]
bgiovanny :
@bgiovanny left the channel.
[2022-06-20 18:59:37]
fly4y :
fly4y joined the channel.
[2022-06-20 19:53:29]
deniss-i979 :
deniss-i979 joined the channel.
[2022-06-21 07:44:41]
userxxx :
userxxx joined the channel.
[2022-06-21 12:01:21]
myidthefrog :
myidthefrog joined the channel.
[2022-06-22 09:00:44]
digitalshaman :
digitalshaman joined the channel.
[2022-06-22 17:45:21]
stretch :
stretch joined the channel.
[2022-06-23 10:24:53]
heash :
heash joined the channel.
[2022-06-23 14:25:57]
yanda2008 :
yanda2008 joined the channel.
[2022-06-23 15:38:13]
heissenberg :
heissenberg joined the channel.
[2022-06-24 01:30:52]
sun :
sun joined the channel.
[2022-06-24 01:32:01]
sun :
sun joined the channel.
[2022-06-24 01:40:09]
hito_no_yume :
yutasyutas joined the channel.
[2022-06-24 09:14:04]
mats.ruden :
mats.ruden joined the channel.
[2022-06-24 14:43:04]
kostya2005 :
kostya2005 joined the channel.
[2022-06-25 11:11:38]
tcdp :
tcdp joined the channel.
[2022-06-25 17:31:43]
airsheen :
airsheen joined the channel.
[2022-06-26 09:00:33]
netwave :
netwave joined the channel.
[2022-06-26 14:15:06]
martonmiklos :
martonmiklos joined the channel.
[2022-06-26 18:05:11]
fiddypal :
fiddypal joined the channel.
[2022-06-27 08:16:49]
joerg :
joerg joined the channel.
[2022-06-27 17:22:00]
sledziu :
sledziu joined the channel.
[2022-06-27 20:30:57]
jjelo :
jjelo joined the channel.
[2022-06-28 01:07:30]
emmteh :
emmteh joined the channel.
[2022-06-28 01:18:24]
mobile1909 :
mobile1909 joined the channel.
[2022-06-28 12:21:37]
docsasha :
docsasha joined the channel.
[2022-06-28 20:26:30]
feco9308 :
feco9308 joined the channel.
[2022-06-29 13:15:13]
kotnr :
kotnr joined the channel.
[2022-06-29 18:25:49]
mr.grub :
mr.grub joined the channel.
[2022-06-29 22:41:32]
salukikev :
salukikev joined the channel.
[2022-06-30 07:28:15]
u67 :
u67 joined the channel.
[2022-06-30 10:43:41]
asmodeus :
asmodeus joined the channel.
[2022-06-30 11:40:38]
gioxxx3 :
gioxxx3 joined the channel.
[2022-06-30 15:16:56]
ipatch :
working with 2 laptop BMS boards both using ti bq chips. have one of them wired to a rpi via i2c.
watched the below video.
https://www.youtube.com/watch?v=P5PNOO2GebY
testing my i2c connection with the dell BMS using `i2cdetect` i'm seeing a lot of output as opposed to 2x values shown in the video above.
my output looks like the below,
```
~ $ i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
10: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
20: 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
30: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
40: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
50: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
60: 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
70: 70 71 72 73 74 75 76 77
```
anything obvious im doing wrong?
[2022-06-30 15:37:32]
ipatch :
i think this is my issue...
[2022-06-30 15:37:42]
ipatch :
https://forums.raspberrypi.com/viewtopic.php?t=261986#p1595466
[2022-06-30 15:46:28]
shanester :
shanester joined the channel.
[2022-06-30 17:16:10]
mrs1 :
mrs1 joined the channel.
[2022-06-30 21:47:03]
djifan0101uk :
djifan0101uk joined the channel.
[2022-07-01 00:37:03]
hostile :
@ipatch I was gonna guess a bad ground perhaps
[2022-07-01 10:20:07]
freezer_sd :
freezer_sd joined the channel.
[2022-07-01 14:29:57]
yaros :
yaros joined the channel.
[2022-07-03 10:40:22]
smart_beanz :
smart_beanz joined the channel.
[2022-07-03 16:00:16]
librakidla :
librakidla joined the channel.
[2022-07-03 20:43:42]
darkshark :
darkshark joined the channel.
[2022-07-04 13:22:31]
marman :
marman joined the channel.
[2022-07-05 07:53:38]
yangyuan :
yangyuan joined the channel.
[2022-07-06 08:07:54]
cvandeplas :
cvandeplas joined the channel.
[2022-07-06 10:16:18]
matsan :
matsan joined the channel.
[2022-07-06 16:56:11]
jim9000 :
jim9000 joined the channel.
[2022-07-08 02:48:43]
markisunsure :
markisunsure joined the channel.
[2022-07-08 15:06:14]
monzilla :
monzilla joined the channel.
[2022-07-09 09:32:20]
mitar111 :
mitar111 joined the channel.
[2022-07-09 13:08:04]
yi497754038 :
yi497754038 joined the channel.
[2022-07-09 15:35:28]
jason1928 :
jason1928 joined the channel.
[2022-07-09 20:06:52]
ixoid :
ixoid joined the channel.
[2022-07-10 10:01:40]
robster :
robster joined the channel.
[2022-07-10 15:17:17]
anesta :
anesta joined the channel.
[2022-07-11 16:09:52]
dfessence :
dfessence joined the channel.
[2022-07-11 18:52:04]
drzlorad :
drzlorad joined the channel.
[2022-07-12 03:10:11]
hhblock :
hhblock joined the channel.
[2022-07-12 07:54:51]
enk2022 :
enk2022 joined the channel.
[2022-07-12 15:49:00]
fartboner :
fartboner joined the channel.
[2022-07-12 18:12:30]
chema_am :
chema_am joined the channel.
[2022-07-14 03:14:39]
kfied :
kfied joined the channel.
[2022-07-14 13:24:34]
karp8 :
karp8 joined the channel.
[2022-07-14 17:23:42]
xou :
xou joined the channel.
[2022-07-15 06:29:10]
foxofer831 :
foxofer831 joined the channel.
[2022-07-16 23:06:15]
ou2 :
ou2 joined the channel.
[2022-07-17 04:34:07]
jandersson :
jandersson joined the channel.
[2022-07-18 07:08:03]
itransit :
itransit joined the channel.
[2022-07-18 12:41:38]
techman.be :
techman joined the channel.
[2022-07-18 13:00:09]
x1diablo :
x1diablo joined the channel.
[2022-07-18 19:35:54]
vlad666 :
vlad666 joined the channel.
[2022-07-18 21:41:14]
a1vivy :
a1vivy joined the channel.
[2022-07-19 02:13:28]
perpetualwalnut :
perpetualwalnut joined the channel.
[2022-07-19 06:17:08]
yuri321 :
yuri321 joined the channel.
[2022-07-19 07:22:22]
edward_tlt :
edward_tlt joined the channel.
[2022-07-20 19:39:45]
gazis :
gazis joined the channel.
[2022-07-21 08:34:11]
zzb :
zzb joined the channel.
[2022-07-21 11:41:14]
shinoby :
shinoby joined the channel.
[2022-07-21 15:21:43]
vernon :
vernon joined the channel.
[2022-07-21 15:28:50]
smars :
smars joined the channel.
[2022-07-23 13:48:43]
dronelabdk :
dronelabdk joined the channel.
[2022-07-25 09:08:39]
evanb :
evanb joined the channel.
[2022-07-25 12:04:25]
razor7788 :
razor7788 joined the channel.
[2022-07-25 14:17:27]
negenii :
negenii joined the channel.
[2022-07-25 21:44:28]
air-merlin :
air-merlin joined the channel.
[2022-07-26 18:35:55]
zchg :
chg joined the channel.
[2022-07-27 11:26:19]
solargudi :
solargudi joined the channel.
[2022-07-27 11:52:07]
sups :
sups joined the channel.
[2022-07-27 20:57:29]
viiince :
viiince joined the channel.
[2022-07-28 06:13:14]
kang1 :
kang1 joined the channel.
[2022-07-28 22:45:30]
tobberfoto :
tobberfoto joined the channel.
[2022-07-29 19:47:19]
nospam2000 :
nospam2000 joined the channel.
[2022-07-29 22:28:35]
lij_mc :
lij_mc joined the channel.
[2022-07-30 00:15:42]
edugonzalezo :
edugonzalezo joined the channel.
[2022-07-30 08:08:06]
nospam2000 :
@nospam2000 left the channel.
[2022-07-30 14:04:25]
marebine75 :
marebine75 joined the channel.
[2022-07-30 20:55:40]
toni :
toni joined the channel.
[2022-07-31 17:18:44]
lyova :
lyova joined the channel.
[2022-08-01 00:19:44]
ogle657 :
ogle657 joined the channel.
[2022-08-01 19:03:01]
dmitry :
dmitry joined the channel.
[2022-08-01 20:38:27]
iluxa :
iluxa joined the channel.
[2022-08-01 23:02:00]
jloc413 :
jloc413 joined the channel.
[2022-08-02 15:41:17]
steemax :
steemax joined the channel.
[2022-08-02 19:14:57]
ddrone44 :
ddrone44 joined the channel.
[2022-08-03 11:36:53]
eddy22 :
eddy22 joined the channel.
[2022-08-03 12:53:19]
xakep :
xakep joined the channel.
[2022-08-04 08:44:30]
google :
google joined the channel.
[2022-08-06 13:27:44]
onurgrsn :
onurgrsn joined the channel.
[2022-08-07 20:26:22]
opb86199jeocecom :
opb86199jeocecom joined the channel.
[2022-08-08 03:33:21]
retrocall :
retrocall joined the channel.
[2022-08-08 07:42:59]
mib_imperator :
mib_imperator joined the channel.
[2022-08-08 12:34:34]
smilesification :
smilesification joined the channel.
[2022-08-08 13:52:30]
tirtxika :
tirtxika joined the channel.
[2022-08-09 13:29:26]
d.gerasymiuk :
d.gerasymiuk joined the channel.
[2022-08-10 08:27:44]
aaaawesome :
aaaawesome joined the channel.
[2022-08-10 14:10:21]
eddiwood :
eddiwood joined the channel.
[2022-08-11 12:53:37]
pequad :
pequad joined the channel.
[2022-08-12 05:16:58]
gmouzith :
gmouzith joined the channel.
[2022-08-12 06:31:30]
lesnikzpua :
lesnikzpua joined the channel.
[2022-08-12 22:53:49]
syaiful12 :
syaiful12 joined the channel.
[2022-08-14 18:48:26]
murusek666 :
murusek666 joined the channel.
[2022-08-15 08:58:04]
auriga :
auriga joined the channel.
[2022-08-15 15:31:15]
d.gerasymiuk :
Hi everyone
Could anyone help me with restoring RC for the DJI Mavic Air 2?
I tried to run DUMLRacer and something went wrong.
Currently, I have 2 LEDs in the middle which blinking one by one(in the video)
The battery is not charging
Can connect to the drone, but without control
Here are packages that I get if I connect to the RC
55 13 04 03 060a 0100 20 06 1e 180600003c00 6f8c
And
55 0e 04 66 2d0a e808 40 00 0f 01 63c9
Thank you for any help!
[2022-08-15 16:45:48]
papalegba :
wagerlabs joined the channel.
[2022-08-15 23:03:12]
hito_no_yume :
I thought DUMLRacer was for Mavic Pro, are you sure it is compatible with MA2? Maybe try to reflash the firmware using DJI Assistant or try drone-hacks.
[2022-08-16 19:07:28]
d.gerasymiuk :
Yeah, I think so now.
I've solved it by connecting RC to the DJI Assistant 2. Thank you!
[2022-08-16 19:23:57]
jamsjjs :
jamsjjs joined the channel.
[2022-08-17 17:30:44]
ihackftw :
ihackftw joined the channel.
[2022-08-21 20:05:21]
starmanj :
starmanj joined the channel.
[2022-08-21 20:10:20]
starmanj :
Like the guy above, I'm trying to connect to my DJI Mavic Air 2 as well. Current version of DJI Assistant connects, but older versions will not connect. Can I downgrade firmware via 1.2.5 Assistant? Will that let Assistant 1.1.2 work again? Or will Dumldore downgrade if 1.2.5 is working?
[2022-08-21 22:56:29]
hito_no_yume :
Depending on your firmware version, downgrading may not be possible. In some firmware updates, DJI decides to enable anti-rollback which prevents downgrading of the firmware. Have a look at drone-hacks and see if it can downgrade from your firmware version.
[2022-08-23 13:14:48]
liangns :
liangns joined the channel.
[2022-08-23 13:16:05]
liangns :
How to unbind controller by crack?
[2022-08-24 04:51:29]
mefistofel :
mefistofel joined the channel.
[2022-08-24 11:50:37]
robmason :
robmason joined the channel.
[2022-08-24 11:53:56]
shailesh_ :
shailesh_ joined the channel.
[2022-08-24 13:02:51]
ouyang :
ouyang joined the channel.
[2022-08-24 14:06:54]
drlssl :
drlssl joined the channel.
[2022-08-24 14:55:50]
monkeeinthesky :
monkeeinthesky joined the channel.
[2022-08-25 20:49:34]
ati0m :
ati0m joined the channel.
[2022-08-25 20:53:42]
ati0m :
Hey,
Can you help me to understand the part of the anti-rollback? I have a fpv, I am thinking of buying drone-hacks license, but I have the 01.02.0015 version, when I connect the software it says anti-rollback 1 and says when I try to downgrade that a license might be needed.. on their website it says it does not downgrade. From every place I see, it says that people can do it using the software.
[2022-08-25 23:49:51]
hito_no_yume :
Is your drone FPV racer? I have looked at the firmware version 01.02.0015, it looks like the antirollback value for this firmware version is 2, compared to 1 from previous version. That means you can't downgrade the firmware using official methods. You will need some sort of hack to manage this. I have checked the drone-hacks, they do mention it is possible to downgrade but you need a license for that. Basically you need to buy the license to be able to downgrade your FW using drone-hacks as far as I understand. I am not sure if there is any other software that can do that, you will need to search and find it.
[2022-08-26 07:47:50]
dmtstarpilot :
dmtstarpilot joined the channel.
[2022-08-26 20:03:39]
speatuk :
Yes you need a license.
Watch this and follow it step by step.
https://youtu.be/j5D2R2FVAaQ
[2022-08-26 22:31:14]
andysayle :
andysayle joined the channel.
[2022-08-27 00:18:36]
watermelonsugar :
watermelonsugar joined the channel.
[2022-08-27 15:32:45]
zarathustra :
zarathustra joined the channel.
[2022-08-27 17:55:49]
fardo :
fardo joined the channel.
[2022-08-27 18:56:46]
g106u5 :
g106u5 joined the channel.
[2022-08-27 19:11:30]
hostile :
https://dji-rev.com/dji-rev/pl/3ttgea4xiingjg779anhzn814o
[2022-08-28 11:32:32]
varvar :
varvar joined the channel.
[2022-08-28 12:20:04]
marcus905 :
marcus905 joined the channel.
[2022-08-29 07:02:26]
ghhh :
ghhh joined the channel.
[2022-08-30 00:04:16]
molten_roll :
molten_roll joined the channel.
[2022-08-30 12:37:21]
bolid :
bolid joined the channel.
[2022-08-30 19:10:15]
adasxdm :
adasxdm joined the channel.
[2022-08-31 07:55:03]
ldji :
ldji joined the channel.
[2022-08-31 22:34:24]
skitionek :
skitionek joined the channel.
[2022-09-01 01:26:29]
ahmetogut :
ahmetogut joined the channel.
[2022-09-01 05:15:51]
foriequals0 :
foriequals0 joined the channel.
[2022-09-01 07:22:35]
johndevops :
johndevops joined the channel.
[2022-09-01 16:07:29]
cmd :
cmd joined the channel.
[2022-09-01 18:27:46]
pve :
pve joined the channel.
[2022-09-02 08:58:18]
dronewatcher :
dronewatcher joined the channel.
[2022-09-02 13:41:17]
ijspear :
ijspear joined the channel.
[2022-09-03 06:41:39]
ylml :
ylml joined the channel.
[2022-09-03 09:13:42]
wadfuk :
wadfuk joined the channel.
[2022-09-03 11:43:06]
djlory3000 :
djlory3000 joined the channel.
[2022-09-03 14:49:51]
stek29 :
stek29 joined the channel.
[2022-09-03 16:05:06]
photogrant :
photogrant joined the channel.
[2022-09-04 11:06:30]
marsplay :
marsplay joined the channel.
[2022-09-04 17:09:04]
daneel :
daneel joined the channel.
[2022-09-04 18:01:58]
daneel :
@daneel left the channel.
[2022-09-04 18:57:34]
joshgfpv :
joshgfpv joined the channel.
[2022-09-04 21:34:33]
oxolot :
Just for fun try to send to WM232 :) py comm_serialtalk.py --port COMxx -a 2 -t 1000 -r 0300 -s 3 -i 237 -x 02 (also -x 06 and -x 07. To switch off -x 01)
[2022-09-05 03:02:14]
normzy :
normzy joined the channel.
[2022-09-05 07:37:59]
a6846048 :
a6846048 joined the channel.
[2022-09-05 09:32:21]
kyokushin :
Guys, does phantom 3 pro is boradcasting drone id?
[2022-09-05 09:34:12]
kyokushin :
( tried to connect to it but it seems to not working (spark worked))
[2022-09-05 09:36:44]
kyokushin :
[2022-09-05 14:26:45]
aghamiri :
aghamiri joined the channel.
[2022-09-05 16:38:58]
geek2009 :
geek2009 joined the channel.
[2022-09-06 11:05:33]
rodneylaconi :
rodneylaconi joined the channel.
[2022-09-06 11:57:01]
howard :
howard joined the channel.
[2022-09-06 12:11:39]
xmktv :
xmktv joined the channel.
[2022-09-07 05:53:25]
tony :
tony joined the channel.
[2022-09-07 08:45:12]
cs2000 :
I think the P3 was well before DroneID was a thing, so no.
[2022-09-07 08:55:03]
dycyple :
dycyple joined the channel.
[2022-09-07 12:33:32]
the_lord :
all P3 series broadcast droneID if FW updated
[2022-09-07 12:33:57]
the_lord :
only P1, P2 doesn't
[2022-09-07 13:23:15]
roberts123 :
roberts123 joined the channel.
[2022-09-07 13:26:13]
nightwalk1 :
nightwalk1 joined the channel.
[2022-09-07 17:06:26]
arifyn :
arifyn joined the channel.
[2022-09-08 01:56:18]
jayplac :
jayplac joined the channel.
[2022-09-08 16:15:23]
irmo :
irmo joined the channel.
[2022-09-09 07:16:56]
thecleaner187 :
thecleaner187 joined the channel.
[2022-09-09 12:20:50]
kyokushin :
on what firmware they're broadcasting that? I am on that older one - unsigned.
[2022-09-09 18:13:13]
uawaa :
uawaa joined the channel.
[2022-09-09 21:05:03]
oido213 :
oido213 joined the channel.
[2022-09-09 21:13:45]
oakley75 :
I thought if it used NAZA, it had the ability to transmit, no? I wish my P2V+ was here to test. Sigh.
[2022-09-09 22:59:28]
the_lord :
Can’t remember
But many times I saw P3 drones on AS screen
[2022-09-10 18:54:19]
alexx :
alexx joined the channel.
[2022-09-11 01:40:45]
whitemouse :
whitemouse joined the channel.
[2022-09-11 01:41:07]
whitemouse :
whitemouse joined the channel.
[2022-09-11 02:05:32]
gunglaroid :
gunglaroid joined the channel.
[2022-09-11 02:11:05]
gunglaroid :
No idea where to really start but I wanted to try and remove the altitude restriction on my mini 3 pro, figured this would be the right place to ask
[2022-09-11 03:19:32]
ninano :
ninano joined the channel.
[2022-09-11 09:21:42]
steviewonders666 :
steviewonders666 joined the channel.
[2022-09-12 12:08:36]
gyfw :
gyfw joined the channel.
[2022-09-12 12:30:59]
cs2000 :
No way to do that currently sadly
[2022-09-12 17:29:47]
mavlink :
mavlink joined the channel.
[2022-09-13 05:26:21]
gunglaroid :
Fair enough
[2022-09-13 07:41:36]
oxolot :
Can anyone advise what do we use for the latest models? Mavic mini 3, Matrice M30T, M300. Thank you
[2022-09-13 07:41:36]
oxolot :
Can anyone advise what do we use for the latest models? Mavic mini 3, Matrice M30T. Thank you
[2022-09-13 07:41:36]
oxolot :
Can anyone advise what WMs do we use for the latest models? Mavic mini 3, Matrice M30T, M300. Thank you
[2022-09-13 07:48:19]
cs2000 :
wm162, not sure, pm430 (assuming you mean Matrice 300)
[2022-09-13 07:58:39]
oxolot :
Yes, Matrice 300, so PM430 here. WM162 for mini 3 I assume? And M30T? And BTW, Mavic mini 2 is WM161?
[2022-09-13 07:58:39]
oxolot :
Yes, Matrice 300, so PM430 here. WM162 for mini 3 I assume? And M30T?
[2022-09-13 07:58:39]
oxolot :
Yes, Matrice 300, so PM430 here. WM162 for mini 3 I assume? And M30T? And BTW, Mavic mini 2 is WM161 or it is mini 2SE? What WM# for Mm2 then?
[2022-09-13 07:58:39]
oxolot :
Yes, Matrice 300, so PM430 here. WM162 for mini 3 I assume? And M30T? And BTW, Mavic mini 2 is WM161 or it is mini 2SE? What WM for Mm2 then?
[2022-09-13 08:52:31]
tmbinc :
pm320 is M30/M30T according to my notes. Mini 2 is wm161, mini SE is wm1605
[2022-09-13 09:05:50]
oxolot :
Thank you. wm1605 - interesting number. Probably means WM160 and a half :). Anyway, these numbers seem to be not so important in the OG's service tool, but nice to keep all of the new models info updated.
[2022-09-13 09:22:32]
cs2000 :
Ahh, thats what PM320 is, thanks @tmbinc, il get that added to DDD ;) (ive been seeing the number, but never knew what model it related too)
[2022-09-13 15:11:35]
ozhek :
ozhek joined the channel.
[2022-09-13 17:13:22]
dubai2233 :
dubai2233 joined the channel.
[2022-09-13 17:32:24]
mumbling4450 :
mumbling4450 joined the channel.
[2022-09-14 12:24:52]
john.kairos :
john.kairos joined the channel.
[2022-09-14 13:51:26]
jp911 :
jp911 joined the channel.
[2022-09-14 15:25:45]
urca87 :
urca87 joined the channel.
[2022-09-14 15:49:31]
m8n6 :
m8n6 joined the channel.
[2022-09-14 23:21:49]
duane :
duane joined the channel.
[2022-09-15 11:30:11]
psihozx :
psihozx joined the channel.
[2022-09-15 16:39:28]
skale :
skale joined the channel.
[2022-09-15 21:45:03]
alt.nq-5711k93 :
alt.nq-5711k93 joined the channel.
[2022-09-16 07:40:27]
normad :
normad joined the channel.
[2022-09-17 16:44:39]
kimdongwook :
kimdongwook joined the channel.
[2022-09-18 08:37:55]
dbd :
dbd joined the channel.
[2022-09-18 19:46:33]
stabone :
stabone joined the channel.
[2022-09-19 03:41:18]
thunderwolf :
thunderwolf joined the channel.
[2022-09-19 19:23:21]
cinars :
cinars joined the channel.
[2022-09-20 08:06:40]
tohha :
tohha joined the channel.
[2022-09-21 17:19:28]
ihackftw :
HI all,
[2022-09-21 17:19:58]
ihackftw :
Has anybody got a link to the Drone hacks NFZ Hacked Cert file please?
[2022-09-23 08:18:53]
skipped_aga :
skipped_aga joined the channel.
[2022-09-23 12:46:46]
cs2000 :
No, if you want to use it, you'd need a DH license and a compatible drone.
[2022-09-23 21:52:37]
rpw :
rpw joined the channel.
[2022-09-24 11:59:53]
kevin93 :
kevin93 joined the channel.
[2022-09-25 12:20:36]
dg1sge :
dg1sge joined the channel.
[2022-09-26 04:02:09]
king88 :
king88 joined the channel.
[2022-09-26 08:17:15]
lebangrev :
lebangrev joined the channel.
[2022-09-26 19:16:36]
fastload :
fastload joined the channel.
[2022-09-27 08:38:14]
herr.frei :
herr.frei joined the channel.
[2022-09-27 11:33:13]
withcon :
withcon joined the channel.
[2022-09-27 11:49:54]
andrej :
andrej joined the channel.
[2022-09-27 13:50:24]
nbghost :
nbghost joined the channel.
[2022-09-28 13:05:39]
jalon :
jalon joined the channel.
[2022-09-28 13:56:15]
mm155wf :
mm155wf joined the channel.
[2022-09-28 17:10:31]
ivlaptev :
ivlaptev joined the channel.
[2022-09-29 09:44:09]
wdesign :
wdesign joined the channel.
[2022-09-29 09:53:36]
sertyz :
sertyz joined the channel.
[2022-09-29 12:59:16]
bertter :
bertter joined the channel.
[2022-09-29 16:16:29]
subreptivus :
subreptivus joined the channel.
[2022-09-29 19:22:09]
ericr :
ericr joined the channel.
[2022-09-30 05:21:16]
knzhz :
knzhz joined the channel.
[2022-10-01 11:44:15]
skhemnik :
skhemnik joined the channel.
[2022-10-01 16:04:40]
mavicquax :
mavicquax joined the channel.
[2022-10-02 09:08:49]
joel9 :
joel9 joined the channel.
[2022-10-02 14:54:51]
bozimusic :
bozimusic joined the channel.
[2022-10-03 12:39:58]
cairoadolfo :
cairoadolfo joined the channel.
[2022-10-03 12:51:19]
ref_iw :
ref_iw joined the channel.
[2022-10-04 06:38:48]
itismo :
itismo joined the channel.
[2022-10-04 10:12:48]
gioppo :
gioppo joined the channel.
[2022-10-04 13:20:30]
kesha :
kesha joined the channel.
[2022-10-07 09:47:21]
ustinovmihail98 :
ustinovmihail98 joined the channel.
[2022-10-07 13:11:03]
cr :
kie joined the channel.
[2022-10-08 02:01:12]
jack.goph :
jack.goph joined the channel.
[2022-10-08 03:38:18]
gu2meng :
gu2meng joined the channel.
[2022-10-08 11:02:43]
lozenberg :
lozenberg joined the channel.
[2022-10-09 17:06:08]
claire :
claire joined the channel.
[2022-10-10 10:16:22]
fajo :
fajo joined the channel.
[2022-10-10 15:35:41]
blue4you :
blue4you joined the channel.
[2022-10-10 21:01:18]
illist_tee :
illist_tee joined the channel.
[2022-10-11 03:16:41]
ginglegingle119 :
ginglegingle119 joined the channel.
[2022-10-11 10:20:41]
ninjoi :
ninjoi joined the channel.
[2022-10-12 10:00:38]
caldis :
caldis joined the channel.
[2022-10-12 12:37:22]
r99bbit :
r99bbit joined the channel.
[2022-10-13 08:49:34]
woveniy992 :
woveniy992 joined the channel.
[2022-10-15 01:25:47]
richter08 :
richter08 joined the channel.
[2022-10-15 04:27:34]
bugalaws :
bugalaws joined the channel.
[2022-10-15 12:33:15]
dilili :
dilili joined the channel.
[2022-10-16 09:32:19]
qq1452689775 :
qq1452689775 joined the channel.
[2022-10-16 11:12:25]
mizyazya :
mizyazya joined the channel.
[2022-10-16 21:02:22]
asdrol :
asdrol joined the channel.
[2022-10-17 22:52:00]
nickphx :
nickphx joined the channel.
[2022-10-18 02:33:01]
madmardagain :
madmardagain joined the channel.
[2022-10-18 08:01:17]
nvumnov :
nvumnov joined the channel.
[2022-10-18 08:20:38]
matthew11301 :
matthew11301 joined the channel.
[2022-10-18 16:34:41]
lonmstalker :
lonmstalker joined the channel.
[2022-10-19 04:32:08]
bugalaws :
guys someone have the firmwares to erease the 40011 error??
[2022-10-19 07:03:12]
dongmou :
dongmou joined the channel.
[2022-10-19 08:58:16]
areoc :
Yes I have My telegram:16603832756
[2022-10-19 08:58:25]
areoc :
+8616603832756
[2022-10-19 15:19:28]
student :
student joined the channel.
[2022-10-19 19:12:32]
drumguy555 :
drumguy555 joined the channel.
[2022-10-20 02:42:14]
trbnkv :
trbnkv joined the channel.
[2022-10-20 13:22:54]
hieronymusma :
hieronymusma joined the channel.
[2022-10-20 15:54:40]
creased :
creased joined the channel.
[2022-10-20 20:49:47]
lychee_cations :
lychee_cations joined the channel.
[2022-10-20 21:35:13]
bitbangingbytes :
hash joined the channel.
[2022-10-21 14:54:45]
kil191 :
kil191 joined the channel.
[2022-10-22 00:10:37]
ahizek :
ahizek joined the channel.
[2022-10-23 06:32:30]
wangqing9113 :
wangqing9113 joined the channel.
[2022-10-23 09:29:55]
yerui :
yerui joined the channel.
[2022-10-23 11:29:42]
marianbella :
marianbella joined the channel.
[2022-10-24 07:47:53]
c1dbr :
c1dbr joined the channel.
[2022-10-25 14:36:16]
cyber :
cyber joined the channel.
[2022-10-25 18:53:53]
bendernet :
bendernet joined the channel.
[2022-10-26 06:32:04]
crashing_bird :
crashing_bird joined the channel.
[2022-10-27 13:49:44]
vmonk :
vmonk joined the channel.
[2022-10-27 15:34:42]
robertod91 :
robertod91 joined the channel.
[2022-10-28 03:26:48]
n1co :
n1co joined the channel.
[2022-10-28 10:14:12]
carlos :
anna joined the channel.
[2022-10-28 10:51:39]
shenyd1120 :
shenyd1120 joined the channel.
[2022-10-28 11:36:54]
suhas :
suhas joined the channel.
[2022-10-28 14:48:21]
pxpp2 :
pxpp2 joined the channel.
[2022-10-29 06:37:42]
bojangles :
bojangles joined the channel.
[2022-10-29 08:59:23]
zboson :
zboson joined the channel.
[2022-10-29 17:25:13]
bojangles :
@bojangles left the channel.
[2022-10-30 01:45:37]
cass67 :
cass67 joined the channel.
[2022-10-30 06:41:45]
bob.alki :
bob.alki joined the channel.
[2022-10-31 10:32:28]
xilirewe :
xilirewe joined the channel.
[2022-10-31 13:51:47]
flymaster :
flymaster joined the channel.
[2022-10-31 20:06:37]
abir :
abir joined the channel.
[2022-11-01 01:51:33]
a1314520zx :
a1314520zx joined the channel.
[2022-11-01 04:58:21]
haizeiwang :
haizeiwang joined the channel.
[2022-11-01 16:56:05]
davan :
davan joined the channel.
[2022-11-02 22:33:19]
mdeblasi91 :
mdeblasi91 joined the channel.
[2022-11-03 00:33:56]
vint_243 :
vint_243 joined the channel.
[2022-11-03 06:02:29]
ethanwong :
ethanwong joined the channel.
[2022-11-04 23:27:33]
pooliop :
pooliop joined the channel.
[2022-11-05 11:27:26]
markco :
markco joined the channel.
[2022-11-05 20:54:12]
flying_pencil :
flying_pencil joined the channel.
[2022-11-06 10:36:00]
jad :
jad joined the channel.
[2022-11-06 18:30:51]
minime :
minime joined the channel.
[2022-11-06 18:32:12]
minime :
hello there,
[2022-11-06 18:35:22]
minime :
can anybody help me with how to unpack mini 2 firmware bin files with python and dji-firmare-tools? I cant see the command at GitHub dji-firmware-tools and dji_xv4_fwcon.py which I used
[2022-11-06 18:36:32]
minime :
previously doesnt recognize Mini 2 bin firmware files as firmware.
[2022-11-06 18:41:42]
minime :
minime updated the channel header to: How to unpack Mini 2 firmware files, please :)
[2022-11-07 09:25:05]
jameshulala :
jameshulala joined the channel.
[2022-11-08 02:15:52]
fredyfas :
fredyfas joined the channel.
[2022-11-08 08:33:01]
alt.nq-5711k93 :
first, extract the sig file from the big firmware file (7zip or tar command)
then you can unpack the firmware 1.05.0000 with the command (example with module 100) :
dji_imah_fwsig.py -vv -u -k PRAK-2019-09 -k TKIE-2019-11 -k UFIE-2019-11 -i wm161_0100_v01.43.00.67_20220615.pro.fw.sig
then extract the content with lz4 command :
lz4 -d wm161_0100_v01.43.00.67_20220615.pro.fw_0100.bin wm161_0100_v01.43.00.67_20220615.pro.fw_0100.unlz4
[2022-11-08 08:37:42]
alt.nq-5711k93 :
then the content is less understandable for me, you can find the squashfs files (content of the root filesystem) at offsets 0x16B1FBC and 0x18190BC
[2022-11-08 08:38:36]
alt.nq-5711k93 :
but I haven't found easy information on this file's contents more than the squashfs content, I'm interested if some found information !
[2022-11-08 08:38:36]
alt.nq-5711k93 :
but I haven't found easy information on this file's contents, I'm interested if some found information !
[2022-11-08 08:38:36]
alt.nq-5711k93 :
but I haven't found easy information on this file's contents more than the squashfs content, I'm interested if someone has information !
[2022-11-08 08:41:00]
alt.nq-5711k93 :
I'm looking for the bin files that check the update files and antirollback values, haven't found something yet, any help welcome
[2022-11-08 12:54:25]
nilssonfpv :
nilssonfpv joined the channel.
[2022-11-08 14:35:52]
tmbinc :
I think there's some kind of directory structure like https://github.com/RigacciOrg/ambarella-h22-firmware-tools, but to unpack, I regularly just split by "IM*H" and sqsh headers
[2022-11-08 14:37:40]
tmbinc :
It would be great if we knew how to unpack firmware images into a NAND image. I have the OOB data figured out (it's just Ambarella's hardware ECC with bad block replacement table) and can read/write ambarella NAND over a USB bootloader (that can be entered by strapping a pin on the debug header) but to make this useful, we'd a way to do useful changes to NAND.
It would also be easy to patch LDR1, remove sig checks, and boot arbitrary kernel + ambarella RTOS + rootfs this way.
[2022-11-08 15:44:04]
markus83 :
@tmbinc can you explain a bit more in detail where the debug pin are and what should I do to enter the bootloader?
[2022-11-08 17:51:20]
quad808 :
quad808 updated the channel header from: How to unpack Mini 2 firmware files, please :) to: noob questions
[2022-11-08 20:03:22]
anatoly :
anatoly joined the channel.
[2022-11-08 20:50:50]
jamesmorez23 :
jamesmorez23 joined the channel.
[2022-11-10 01:33:54]
tipev77733 :
tipev77733 joined the channel.
[2022-11-10 17:17:21]
sharptak :
sharptak joined the channel.
[2022-11-11 13:09:37]
jorron :
jorron joined the channel.
[2022-11-11 15:54:43]
alexpassos0 :
alexpassos0 joined the channel.
[2022-11-12 07:16:32]
clungnor :
clungnor joined the channel.
[2022-11-12 08:44:20]
gimis :
gimis joined the channel.
[2022-11-12 18:40:02]
buyiwuxi :
buyiwuxi joined the channel.
[2022-11-13 04:11:05]
kawalski73 :
kawalski73 joined the channel.
[2022-11-13 05:38:44]
edgar :
edgar joined the channel.
[2022-11-13 21:09:59]
ybb :
ybb joined the channel.
[2022-11-14 12:19:02]
wwwss :
wwwss joined the channel.
[2022-11-14 17:22:07]
manoela :
manoela joined the channel.
[2022-11-15 18:58:21]
rohlik :
rohlik joined the channel.
[2022-11-16 03:33:48]
johane :
johane joined the channel.
[2022-11-16 03:37:19]
johane :
mini2
[2022-11-16 03:38:14]
johane :
mini2
[2022-11-17 03:21:59]
huohuoliu :
huohuoliu joined the channel.
[2022-11-17 10:28:37]
cyberdynamic :
cyberdynamic joined the channel.
[2022-11-17 17:16:48]
droneflow :
droneflow joined the channel.
[2022-11-18 12:29:11]
dima_2403 :
dima_2403 joined the channel.
[2022-11-18 22:11:01]
xchipx :
xchipx joined the channel.
[2022-11-19 10:29:37]
jizhuang :
jizhuang joined the channel.
[2022-11-19 14:12:14]
aepik :
aepik joined the channel.
[2022-11-19 15:09:18]
dkustec :
dkustec joined the channel.
[2022-11-19 16:22:52]
swdx :
swdx joined the channel.
[2022-11-19 19:45:07]
anton_anton :
anton_anton joined the channel.
[2022-11-19 20:13:32]
plugandplaytor :
plugandplaytor joined the channel.
[2022-11-20 09:48:07]
ak48fem1 :
ak48fem1 joined the channel.
[2022-11-21 16:34:52]
houarican :
houarican joined the channel.
[2022-11-21 20:50:43]
dub :
dub joined the channel.
[2022-11-22 14:23:36]
putziputz :
putziputz joined the channel.
[2022-11-22 23:28:24]
zenon :
zenon joined the channel.
[2022-11-23 10:42:19]
naga :
naga joined the channel.
[2022-11-23 10:44:21]
vit127549 :
vit127549 joined the channel.
[2022-11-23 13:30:40]
lpaul :
lpaul joined the channel.
[2022-11-24 14:06:38]
revhex :
revhex joined the channel.
[2022-11-26 03:38:23]
mufasa :
mufasa joined the channel.
[2022-11-26 13:57:29]
wera33 :
wera33 joined the channel.
[2022-11-26 21:16:03]
ivar :
ivar joined the channel.
[2022-11-27 18:53:39]
alco628 :
alco628 joined the channel.
[2022-11-28 02:29:42]
plugandplaytor :
Why would the ARB be the same for these two versions for the Mavic 3?
[2022-11-28 07:25:34]
yasin :
yasin joined the channel.
[2022-11-28 13:09:57]
cs2000 :
My bad, fixed!
[2022-11-28 23:41:19]
jordonxbc :
jordonxbc joined the channel.
[2022-11-29 02:04:35]
technick :
technick joined the channel.
[2022-11-29 09:39:50]
woshiwulin :
woshiwulin joined the channel.
[2022-11-30 10:11:25]
drone_king123 :
drone_king123 joined the channel.
[2022-12-01 06:01:47]
spectrrr30 :
spectrrr30 joined the channel.
[2022-12-01 17:52:29]
tcgb :
tcgb joined the channel.
[2022-12-01 22:53:33]
mea :
mea joined the channel.
[2022-12-02 02:27:03]
zy1004 :
zy1004 joined the channel.
[2022-12-02 09:00:50]
xenoho4122 :
xenoho4122 joined the channel.
[2022-12-02 15:56:29]
krispyfpv :
krispyfpv joined the channel.
[2022-12-02 22:32:52]
dmtr :
dmtr joined the channel.
[2022-12-03 15:29:33]
chorus :
chorus joined the channel.
[2022-12-03 15:50:41]
kalum88 :
kalum88 joined the channel.
[2022-12-04 01:09:35]
noxxul :
noxxul joined the channel.
[2022-12-05 01:32:36]
zy1004 :
zy1004 joined the channel.
[2022-12-05 01:32:44]
zy1004 :
@zy1004 left the channel.
[2022-12-05 01:34:19]
zy1004 :
zy1004 joined the channel.
[2022-12-05 06:18:49]
prettymuchathrowaway69 :
prettymuchathrowaway69 joined the channel.
[2022-12-05 10:31:57]
maj :
maj joined the channel.
[2022-12-06 07:04:10]
sonic414 :
sonic414 joined the channel.
[2022-12-06 16:40:20]
chengcheng :
chengcheng joined the channel.
[2022-12-06 17:04:46]
buzzcam :
buzzcam joined the channel.
[2022-12-06 17:13:21]
dienox :
dienox joined the channel.
[2022-12-07 11:30:16]
hi_all :
hi_all joined the channel.
[2022-12-07 13:33:02]
zvsvr :
zvsvr joined the channel.
[2022-12-08 17:55:15]
mbarnes70 :
mbarnes70 joined the channel.
[2022-12-08 21:48:49]
moinmoin68 :
moinmoin68 joined the channel.
[2022-12-09 02:29:27]
al96 :
al96 joined the channel.
[2022-12-09 19:46:57]
mr.twich :
mr.twich joined the channel.
[2022-12-09 23:29:51]
invender :
invender joined the channel.
[2022-12-10 07:58:02]
xuzhi1188 :
xuzhi1188 joined the channel.
[2022-12-10 08:24:24]
m2k2 :
m2k2 joined the channel.
[2022-12-10 13:13:54]
loulouki :
loulouki joined the channel.
[2022-12-10 13:44:30]
wr2475973835 :
wr2475973835 joined the channel.
[2022-12-10 17:00:15]
freakmonk :
freakmonk joined the channel.
[2022-12-10 22:50:28]
joeri :
joeri joined the channel.
[2022-12-11 01:33:12]
valiantroku :
valiantroku joined the channel.
[2022-12-11 10:46:36]
vpinch4 :
vpinch4 joined the channel.
[2022-12-11 15:11:16]
costac_it :
costac_it joined the channel.
[2022-12-13 03:52:01]
knmbp :
knmbp joined the channel.
[2022-12-13 04:48:52]
copternutfpv :
copternutfpv joined the channel.
[2022-12-14 10:31:15]
faquaral :
faquaral joined the channel.
[2022-12-15 08:55:09]
capg :
capg joined the channel.
[2022-12-15 14:32:40]
spudgy :
spudgy joined the channel.
[2022-12-15 15:10:51]
fredbotton :
fredbotton joined the channel.
[2022-12-17 19:05:50]
ronenha :
ronenha joined the channel.
[2022-12-18 00:05:40]
milenovic :
milenovic joined the channel.
[2022-12-18 06:26:18]
chasseur :
chasseur joined the channel.
[2022-12-19 04:18:16]
haodizz821101 :
haodizz821101 joined the channel.
[2022-12-20 09:54:19]
sabbath :
sabbath joined the channel.
[2022-12-21 08:22:53]
p_m_r_s :
p_m_r_s joined the channel.
[2022-12-21 14:33:08]
hammer :
hammer joined the channel.
[2022-12-21 21:50:46]
adb_drone_1 :
adb_drone_1 joined the channel.
[2022-12-21 21:55:40]
wixadal747 :
wixadal747 joined the channel.
[2022-12-21 23:02:47]
kotovskiy :
kotovskiy joined the channel.
[2022-12-22 03:00:51]
johnnokomis :
johnnokomis joined the channel.
[2022-12-22 07:59:19]
fedosgad :
fedosgad joined the channel.
[2022-12-23 17:32:55]
mangelbg :
mangelbg joined the channel.
[2022-12-23 20:00:37]
tekkfiend :
tekkfiend joined the channel.
[2022-12-24 06:43:53]
chen :
chen joined the channel.
[2022-12-24 16:04:07]
cgmaxed :
cgmaxed joined the channel.
[2022-12-24 16:33:34]
mannas :
mannas joined the channel.
[2022-12-24 20:01:29]
gaijin :
gaijin joined the channel.
[2022-12-26 08:24:05]
baxove :
derowey371 joined the channel.
[2022-12-26 15:14:32]
kuavk :
kuavk joined the channel.
[2022-12-26 20:12:56]
vadims2.mne :
vadims2.mne joined the channel.
[2022-12-27 10:36:55]
algimantas :
algimantas joined the channel.
[2022-12-27 13:36:02]
elder :
elder joined the channel.
[2022-12-28 02:18:50]
griffo77 :
griffo77 joined the channel.
[2022-12-30 05:56:00]
anatol :
anatol joined the channel.
[2022-12-30 14:23:53]
nicolas_dileonardo :
nicolas_dileonardo joined the channel.
[2022-12-31 09:15:40]
grisharoma :
grisharoma joined the channel.
[2022-12-31 19:57:28]
trueandfalse :
spartaksm99 joined the channel.
[2022-12-31 22:21:33]
fantom :
fantom joined the channel.
[2023-01-01 10:20:11]
flowdrone :
flowdrone joined the channel.
[2023-01-01 17:18:15]
trueandfalse :
@spartaksm99 left the channel.
[2023-01-02 14:23:15]
longjohndroid :
longjohndroid joined the channel.
[2023-01-02 18:20:52]
cassio_franquini :
cassio_franquini joined the channel.
[2023-01-03 00:33:50]
flyhigh :
flyhigh joined the channel.
[2023-01-03 05:28:12]
kaleongo :
kaleongo joined the channel.
[2023-01-04 15:33:57]
denisbsu :
denisbsu joined the channel.
[2023-01-04 19:16:58]
gde :
gde joined the channel.
[2023-01-05 00:42:37]
gde :
@gde left the channel.
[2023-01-05 10:19:23]
percy_jackson :
percy_jackson joined the channel.
[2023-01-05 11:04:09]
mileshkin :
mileshkin joined the channel.
[2023-01-05 14:04:00]
mahya :
mahya joined the channel.
[2023-01-05 18:50:53]
anton_anton :
Hello everyone How to calibrate gimbal to Mavic 3 and mini 3?
[2023-01-05 21:36:29]
grandman :
grandman joined the channel.
[2023-01-06 22:37:25]
dabeast1234 :
dabeast1234 joined the channel.
[2023-01-07 04:38:17]
adlemx :
adlemx joined the channel.
[2023-01-07 10:24:26]
vjustme :
vjustme joined the channel.
[2023-01-08 17:33:04]
aviationnerd :
aviationnerd joined the channel.
[2023-01-09 17:17:19]
urbanmuzak :
urbanmuzak joined the channel.
[2023-01-10 11:53:03]
zbc :
zbc joined the channel.
[2023-01-10 14:28:55]
ibizahouse :
ibizahouse joined the channel.
[2023-01-11 09:51:15]
kijije1272 :
kijije1272 joined the channel.
[2023-01-12 17:05:04]
yosa :
yosa joined the channel.
[2023-01-13 03:13:35]
yshq4djirev :
yshq4djirev joined the channel.
[2023-01-13 12:01:22]
daveau :
daveau joined the channel.
[2023-01-14 05:43:30]
leon20008 :
leon20008 joined the channel.
[2023-01-14 10:28:40]
skiper_dm :
skiper_dm joined the channel.
[2023-01-15 15:53:48]
flyinguy79 :
flyinguy79 joined the channel.
[2023-01-15 17:16:50]
bmsgzh :
bmsgzh joined the channel.
[2023-01-15 20:15:29]
o0raq0o :
o0raq0o joined the channel.
[2023-01-16 03:04:48]
remnp :
remnp joined the channel.
[2023-01-17 02:52:13]
eheran :
eheran joined the channel.
[2023-01-17 09:04:52]
agaff :
agaff joined the channel.
[2023-01-17 10:22:27]
huluwa :
huluwa joined the channel.
[2023-01-17 16:51:00]
marcos_aurelio :
marcos_aurelio joined the channel.
[2023-01-18 01:55:53]
jackma :
wjydji2022 joined the channel.
[2023-01-19 04:47:45]
kpetz :
kpetz joined the channel.
[2023-01-19 11:04:13]
pablofunes :
pablofunes joined the channel.
[2023-01-19 12:59:27]
ginostred :
ginostred joined the channel.
[2023-01-19 14:10:26]
sicivo3584 :
sicivo3584 joined the channel.
[2023-01-20 07:32:45]
xuange :
xuange joined the channel.
[2023-01-20 15:15:05]
kruk :
kruk joined the channel.
[2023-01-22 03:35:06]
ian1638 :
ian1638 joined the channel.
[2023-01-22 20:27:04]
jglx3p :
jglx3p joined the channel.
[2023-01-23 20:01:30]
aiazzisep :
aiazzisep joined the channel.
[2023-01-24 06:27:07]
kirat :
kirat joined the channel.
[2023-01-24 15:52:59]
lokidokister :
lokidokister joined the channel.
[2023-01-25 15:21:06]
pomsta :
pomsta joined the channel.
[2023-01-25 16:21:31]
hed :
hed joined the channel.
[2023-01-25 16:25:35]
wag-on :
mcht joined the channel.
[2023-01-25 21:51:41]
joroke7857 :
joroke7857 joined the channel.
[2023-01-26 08:24:38]
woweifeng :
woweifeng joined the channel.
[2023-01-26 14:57:01]
gareb :
gareb joined the channel.
[2023-01-26 16:28:57]
barretop :
barretop joined the channel.
[2023-01-27 09:08:06]
accountfrompl :
accountfrompl joined the channel.
[2023-01-28 14:31:55]
nextdoc :
nextdoc joined the channel.
[2023-01-28 21:42:52]
meshkovl :
meshkovl joined the channel.
[2023-01-29 21:42:55]
sebo212212 :
sebo212212 joined the channel.
[2023-01-29 22:28:40]
cygnus-x1 :
cygnus-x1 joined the channel.
[2023-01-30 00:46:03]
emcgillveray :
emcgillveray joined the channel.
[2023-01-30 05:57:45]
sistor :
sistor joined the channel.
[2023-01-30 13:53:54]
oathk33p3r :
oathk33p3r joined the channel.
[2023-01-30 17:21:48]
mmsparkle :
mmsparkle joined the channel.
[2023-01-30 21:42:33]
pagrei :
pagrei joined the channel.
[2023-01-31 06:02:45]
cd1028 :
cd1028 joined the channel.
[2023-01-31 09:01:59]
zdsam :
zdsam joined the channel.
[2023-01-31 11:45:04]
zuchmir :
zuchmir joined the channel.
[2023-02-01 07:27:26]
mertali :
mertali joined the channel.
[2023-02-01 07:53:58]
nikoman :
nikoman joined the channel.
[2023-02-01 21:16:10]
chebel01 :
chebel01 joined the channel.
[2023-02-02 10:57:43]
cyyfhj :
cyyfhj joined the channel.
[2023-02-02 15:46:33]
bombo :
bombo joined the channel.
[2023-02-03 00:21:15]
peenie :
peenie joined the channel.
[2023-02-03 03:32:42]
caspar :
caspar joined the channel.
[2023-02-03 12:16:29]
z79534505 :
z79534505 joined the channel.
[2023-02-03 13:08:25]
tian123 :
tian123 joined the channel.
[2023-02-04 04:21:02]
a40dji :
a40dji joined the channel.
[2023-02-05 10:09:21]
ahai :
ahai joined the channel.
[2023-02-06 18:33:08]
eug3nix :
eug3nix joined the channel.
[2023-02-06 19:12:10]
arikw2 :
arikw2 joined the channel.
[2023-02-06 22:22:26]
ondrbal :
ondrbal joined the channel.
[2023-02-08 05:45:04]
sober :
sober joined the channel.
[2023-02-08 09:08:00]
sicivo3584 :
@sicivo3584 left the channel.
[2023-02-08 22:40:01]
bond :
bond joined the channel.
[2023-02-10 11:03:50]
njordcz :
njordcz joined the channel.
[2023-02-10 15:59:34]
rudrasama :
anyone found any way to downgrade phantom 4 pro V2?
[2023-02-10 19:42:51]
bayaser :
bayaser joined the channel.
[2023-02-10 20:26:29]
tstotch :
tstotch joined the channel.
[2023-02-11 02:22:31]
birdman82 :
birdman82 joined the channel.
[2023-02-11 10:51:48]
hygzupx :
hygzupx joined the channel.
[2023-02-11 16:57:03]
quad808 :
why?
[2023-02-11 17:45:01]
fuego :
fuego joined the channel.
[2023-02-11 20:57:21]
alanzfpv :
alanzfpv joined the channel.
[2023-02-12 17:54:08]
rudrasama :
Because it stopped connecting with remote controller after an upgrade.
[2023-02-12 18:37:38]
whisper :
whisper joined the channel.
[2023-02-13 12:06:38]
gilroy34 :
gilroy34 joined the channel.
[2023-02-13 23:28:58]
hardaqa :
hardaqa joined the channel.
[2023-02-14 09:05:13]
iosav :
iosav joined the channel.
[2023-02-14 10:16:56]
zaur :
zaur joined the channel.
[2023-02-14 11:31:21]
jdan7387 :
jdan7387 joined the channel.
[2023-02-14 11:43:52]
arbarof :
arbarof joined the channel.
[2023-02-14 16:20:20]
balamacab :
balamacab joined the channel.
[2023-02-14 23:10:43]
ravidbhadaniya :
ravidbhadaniya joined the channel.
[2023-02-15 15:23:24]
es2311 :
es2311 joined the channel.
[2023-02-16 17:20:46]
markjw :
markjw joined the channel.
[2023-02-16 18:12:05]
ms123 :
ms123 joined the channel.
[2023-02-16 19:14:05]
ozyr2 :
ozyr2 joined the channel.
[2023-02-17 05:27:58]
ramzet :
ramzet joined the channel.
[2023-02-17 11:09:47]
thephoenix137 :
thephoenix137 joined the channel.
[2023-02-18 00:11:32]
asdqwe :
asdqwe joined the channel.
[2023-02-18 01:15:39]
nigmea :
nigmea joined the channel.
[2023-02-18 09:47:37]
modimaderchod :
modimaderchod joined the channel.
[2023-02-19 19:53:16]
crazyfluffypony :
crazyfluffypony joined the channel.
[2023-02-20 15:54:30]
unquaiz :
unquaiz joined the channel.
[2023-02-20 17:16:05]
gudvin :
gudvin joined the channel.
[2023-02-20 18:59:41]
a1th0 :
a1th0 joined the channel.
[2023-02-21 07:09:10]
serg113 :
serg113 joined the channel.
[2023-02-21 07:40:49]
makeforce :
makeforce joined the channel.
[2023-02-21 10:36:45]
ibndias :
ibndias joined the channel.
[2023-02-21 20:21:02]
dirtyhandz :
dirtyhandz joined the channel.
[2023-02-22 02:52:11]
kylebamboo :
kylebamboo joined the channel.
[2023-02-22 04:40:55]
gfl12315 :
gfl12315 joined the channel.
[2023-02-22 07:21:22]
zhanghao :
zhanghao joined the channel.
[2023-02-22 17:46:25]
kabrhel :
kabrhel joined the channel.
[2023-02-23 09:10:10]
valakas :
valakas joined the channel.
[2023-02-23 18:05:25]
dubliss76 :
danuta1809 joined the channel.
[2023-02-23 19:42:00]
skull14541 :
skull14541 joined the channel.
[2023-02-23 23:29:52]
tmbinc :
I feel stupid. So, the RC-N1 should behave as following:
When I connect it to DJI Fly, and I'm selecting a specific UAV type, I would expect DJI Fly to automatically upgrade to the right firmware type; typically the most recent version. This works perfectly on _some_ RC-N1 that I have. Every time I select a different UAV type, it tells me "Firmware version inconsistent" and offers to correct it.
But then I have a few *other* RC-N1, where it .. simply doesn't do that. I can select any UAV, and it doesn't say "Firmware inconsistent", but it doesn't pair. In DA2, I get a "Server exception (2-0) Please retry" on the firmware page, and it shows version as 02.00.1200. In DJI Fly, when I click "check for server updates", I get a server error as well. (For any other remote, it can download firmware and doesn't show the error)
It seems to be consistent that neither DA2 nor DJI Fly can upgrade RCs with 02.00.xxxx on them.
[2023-02-24 03:55:59]
cao150702 :
cao150702 joined the channel.
[2023-02-24 05:11:58]
oakley75 :
That's good to know (but terrible for you unfortunately). I received the same error with Assistant. It seems Fly will update a very old 01.00.0108 RCN1, but not Assistant. But why the .02.00.xxxx firmware is in update-purgatory is damn odd.
[2023-02-24 14:21:26]
sinco :
sinco joined the channel.
[2023-02-24 17:59:55]
gabriielangel :
gabriielangel joined the channel.
[2023-02-25 01:19:21]
oakley75 :
@tmbinc Speaking of the RC-N1, how's your range been on the 02.xx series firmware? People seem to say the newer ones have less range. On 04.01.0016 the range seems normal to me, but maybe the 02 series is better IDK. RC-N1's on early 01.xx firmware (108 & 250) have amazing range with the Air 2, but of course won't pair with the mini 2. My experience.
[2023-02-25 01:19:21]
oakley75 :
@tmbinc Speaking of the RC-N1, how's your range been on the 02.xx series firmware? On 04.01.0016 the range seems normal to me, but maybe the 02 series is better IDK. RC-N1's on early 01.xx firmware (108 & 250) have amazing range with the Air 2, but of course won't pair with the mini 2. My experience.
[2023-02-25 21:25:01]
serg.gangubas :
serg.gangubas joined the channel.
[2023-02-25 23:21:32]
dji_kurat :
dji_kurat joined the channel.
[2023-02-26 09:01:20]
hasan :
hasan joined the channel.
[2023-02-26 21:32:09]
denisbsu :
Hey,
I am playing with old Mavic Pro over WiFi and it refuses to go further than 80 meters from starting point. It seems that in older versions of an app this distance was configurable, but it seems not anymore. I can monitor traffic between app and drone and can see that:
1) app itself nor sets this limit, nor reads it from drone (as far as I see),
2) app do query "g_config.flying_limit.max_radius" it set to 1.5km,
3) when drone reaches this limit, in "FlyC Vis Avoidance Param Get" flag "Radius Limit Working" sets to true, so _some_ limit is working.
It looks like wifi connection just forces this limit. Can someone point me to either relevant config parameter or a way to bypass this limit?
[2023-02-27 07:24:22]
newmanhero :
newmanhero joined the channel.
[2023-02-27 07:28:43]
tmbinc :
I haven't worked with Mavic Pro; but sometimes the flight controller log (extracted from flight recorder) will give you hints. Have you looked there?
[2023-02-27 09:01:34]
denisbsu :
Thanks for an idea. Am I get correctly that special file should be created on SDcard to get a log?
[2023-02-27 14:33:45]
tmbinc :
I don't know for Mavic Pro; for newer drones, it gets recorded to internal storage and you can either export it with DA2, or grab it from your remote/app (it gets pushed to it), or from the drone via FTP/ADB
[2023-02-27 18:36:51]
quad808 :
Did you sign into the app with your DJI Account?
[2023-02-27 19:52:23]
denisbsu :
Yes
[2023-02-27 20:04:35]
denisbsu :
Warnings in app just says "Max Flight Distance Reached. Adjust in Main Controller settings if necessary" - but adjustment is blocked (I saw in videos with earlier app versions that adjustment _was_ possible, but it seems not anymore). Got FTP, downloaded and decrypted logs, but fly controller logs are in binary format (FLYXXX.DAT). Vision logs are intact, but gave no clue. I'll try with Android, but for IOS I only see max radius reached flag getting up by drone, no additional info. BTW, by hint of @quad808 reviewed my flight in Cloud and in fact max distance was 105m, not 80, as app says.
[2023-02-27 22:53:40]
tmbinc :
Can you decode FLYXXX.DAT with DatCon?
[2023-02-28 07:55:23]
denisbsu :
Wow, looks like exactly what I needed to view FlyC logs! Thanks a lot!
[2023-03-01 05:09:27]
iboundary :
iboundary joined the channel.
[2023-03-01 21:25:53]
leoionz :
leoionz joined the channel.
[2023-03-02 00:52:33]
icejack1030 :
icejack1030 joined the channel.
[2023-03-02 11:42:12]
krzysztofw79 :
krzysztofw79 joined the channel.
[2023-03-03 21:42:25]
perfekt :
perfekt joined the channel.
[2023-03-04 07:31:33]
leatherman1 :
leatherman1 joined the channel.
[2023-03-04 12:45:40]
i9029 :
i9029 joined the channel.
[2023-03-04 21:44:48]
kramer :
kramer joined the channel.
[2023-03-05 12:29:33]
efwefaf :
Can anyone use this to unlock the DJI T40 battery and modify the number of cycles
[2023-03-05 17:02:16]
denisbsu :
Is there a DUML command to subscribe to realtime Recorder data? Or is it accessible only over FTP?
[2023-03-05 19:25:59]
pingspike :
@efwefaf I'm sure there's another 47 channels you haven't yet asked that question in yet ?
[2023-03-06 09:04:02]
tmbinc :
Flight record data is pushed to blackbox (and stored locally) and to app, I'm not aware you can make FC push it to something else. (Which model btw?)
[2023-03-06 09:04:31]
tmbinc :
With e.g. RCS231 it gets pushed out to app, but you can enabled "wsdk" mode and then it's pushed to ACM port
[2023-03-06 09:04:48]
tmbinc :
("app" == top USB port, with AoA protocol; "ACM" == bottom USB port)
[2023-03-06 09:05:09]
tmbinc :
By default, only 10xx is routed to ACM port, and 0200 to "app" port. With WSDK mode, 0200 is also routed to ACM port.
[2023-03-06 09:05:19]
tmbinc :
Not sure though how much this helps you
[2023-03-06 09:05:29]
tmbinc :
Can you describe your goal?
[2023-03-06 14:18:12]
denisbsu :
I am playing with Mavic Pro (the first one) and I want to get raw IMU data in realtime if possible. As you already mentioned all data gets pushed to blackbox and accessible over ftp, but drone is trying to encrypt it (whole file at a time, takes few minutes), and I can't see any way to extract it in real time - but with your great suggestion I am able to access data after flight. I have access to USB port and I can decode DUML datastream, but in current state there are only Heatbeats with logs and "OSD General data". That's why I was wondering if there is command to subscribe to more data.
[2023-03-06 19:37:27]
peranwuk :
peranwuk joined the channel.
[2023-03-06 22:54:35]
kateonki :
kateonki joined the channel.
[2023-03-07 06:04:42]
ololosha :
ololosha joined the channel.
[2023-03-07 15:12:47]
mud :
mud joined the channel.
[2023-03-07 15:27:28]
carrels_entails.0e :
carrels_entails.0e joined the channel.
[2023-03-07 16:57:06]
oxolot :
BTW. How to get something from backbox of e1e? Let's say if I have adb to e2. That is on M3
[2023-03-07 16:57:06]
oxolot :
BTW. How to get something from backbox of e1e? Let's say if I have adb to e2.
[2023-03-08 18:36:00]
thrry :
thrry joined the channel.
[2023-03-09 04:16:15]
chimai :
chimai joined the channel.
[2023-03-09 13:48:21]
doodlenoodle :
doodlenoodle joined the channel.
[2023-03-09 16:24:10]
tmbinc :
Is there _any_ DJI device that supports watermarking the video? There's a watermarking plugin in the firmware that is configured to insert GPS position and time/date but I can't see this actually being used anywhere
[2023-03-09 16:24:43]
tmbinc :
(Background: I want to do custom injection - a FIR overlay from a FLIR lepton sensor - and the watermark plugin may be a good start, but I'd like to see it working first.)
[2023-03-09 17:02:06]
pkytwotwo :
pkytwotwo joined the channel.
[2023-03-09 22:09:53]
ttt :
ttt joined the channel.
[2023-03-10 07:17:59]
papalegba :
Did you check the /blackbox directory?
[2023-03-10 09:15:13]
tmbinc :
You can't go from e2 to e1e unless e1e also has ADB enabled (then of course it's easy - adb pull /black/box /tmp or something)
[2023-03-10 09:15:46]
tmbinc :
I think DA2 pulls the logs directly from e1e but not quite sure
[2023-03-11 13:25:37]
gudvin :
Can someone tell me how to use ADB for Mavic 3? I have an app from ji but I don't know the password
[2023-03-11 18:05:40]
bopoh :
bopoh joined the channel.
[2023-03-12 08:15:55]
papalegba :
Reverse the app the disable password verification? So is the app encrypted and you can't run it?
[2023-03-12 08:15:55]
papalegba :
Reverse the app the disable password verification? So is the app encrypted and you can't run it? What does it do?
[2023-03-13 04:52:38]
lazzyfatty :
lazzyfatty joined the channel.
[2023-03-13 05:05:29]
xsstf :
xsstf joined the channel.
[2023-03-13 14:29:21]
vsh :
vsh joined the channel.
[2023-03-14 00:57:59]
wolfmavik :
wolfmavik joined the channel.
[2023-03-14 12:14:20]
stanlu :
stanlu joined the channel.
[2023-03-14 13:11:55]
danniel :
danniel joined the channel.
[2023-03-14 19:20:54]
anghammarad :
anghammarad joined the channel.
[2023-03-14 23:05:05]
syska :
syska joined the channel.
[2023-03-15 02:05:21]
drone :
drone joined the channel.
[2023-03-15 22:09:44]
fivemedia :
fivemedia joined the channel.
[2023-03-16 09:45:54]
gdb :
gdb joined the channel.
[2023-03-16 17:42:41]
askohi :
askohi joined the channel.
[2023-03-17 03:03:27]
moyditumla :
moyditumla joined the channel.
[2023-03-17 04:04:11]
carlitos1409 :
carlitos1409 joined the channel.
[2023-03-18 09:17:36]
yulingkang :
yulingkang joined the channel.
[2023-03-19 06:29:05]
zcq6688 :
zcq6688 joined the channel.
[2023-03-19 21:22:06]
k_k :
kulkraus joined the channel.
[2023-03-20 06:12:25]
sierra0815 :
sierra0815 joined the channel.
[2023-03-20 10:05:16]
testfw :
testfw joined the channel.
[2023-03-21 11:22:23]
milo2k :
milo2k joined the channel.
[2023-03-21 15:26:03]
chinanumberone :
chinanumberone joined the channel.
[2023-03-21 20:26:34]
efimato_re :
efimato_re joined the channel.
[2023-03-23 16:45:45]
sappy :
sappy joined the channel.
[2023-03-23 18:45:48]
shmookey :
shmookey joined the channel.
[2023-03-23 21:35:11]
elio :
elio joined the channel.
[2023-03-23 23:22:55]
reggaester :
reggaester joined the channel.
[2023-03-24 21:07:41]
wtarantul :
wtarantul joined the channel.
[2023-03-26 11:27:32]
laitala88 :
laitala88 joined the channel.
[2023-03-27 06:51:34]
kevbo :
kevbo joined the channel.
[2023-03-27 10:16:27]
kennyx :
kennyx joined the channel.
[2023-03-27 11:59:04]
tmbinc :
Who looked into the Movidius stuff back then? I'm currently looking (again) into automotive thermal cameras, and the Veoneer (Ex-Autoliv) NV4/NiVi4 is essential a FLIR Boson 640 with custom software that requires authentication before you can use it. It responds to Boson serial commands but doesn't "enable" before unlock (same behavior as NV1/NV2/NV3 that all were based on respective off-the-shelf devices really with additional unlock requirements).
NV4 uses a Movidius MA2155, obviously with encrypted firmware, so I wanted to see if there's a viable attack to recover the firmware encryption key. I have a stack of WM004 boards here for cheap testing.
[2023-03-27 16:46:17]
verifiedev :
verifiedev joined the channel.
[2023-03-28 00:26:14]
djireverser :
djireverser joined the channel.
[2023-03-28 20:43:07]
moyditumla :
I have an Air 2s on 02.04.2120 (ARB 2 I think??); trying to find a way to remove errors from changing the gimbal. Very hard to find info on this...
Can this be accomplished by flashing a special firmware?
I scrolled through DDD and the only one that mentioned the word "calibration" was 20.04.2500 (ARB 5). If I flash this, is it supposed to resolve those errors? Then, will it be locked to only firmware ARB 5 and above? Please be gentle, my brain hurts :)
[2023-03-28 20:56:23]
wag-on :
Try version 09.09.0900 from DDD. Arb 2. Maybe it will fix it. If it doesn't, you can install your own version.
[2023-03-28 21:00:43]
wag-on :
20.04.2500 For those who can't downgrade. It provides calibration in the latest version. The middlewares there also do the same. You have to find the middleware with your own ARB. value. (some of them are paid)
[2023-03-28 21:19:41]
moyditumla :
Thank you for your reply!
How do you know which version does what? There are no release notes I can see. I'm not opposed to doing my own research, I just can't find anything at all!
So are you saying that 09.09.0900 can fix the 40021 (IMU) or 40011 (gimbal) errors? Or that some other firmware will fix it?
[2023-03-28 21:39:43]
wag-on :
There are Middlewares in DDD. And they clear the errors. I can't test it for you. I don't have air2s. The green ones are usually middleware. So calibration is bug fix or modified.
[2023-03-28 21:43:58]
wag-on :
Load 09.09.0900 and do all the calibrations. (IMU.KUMPAS.GIMBAL) If you get stuck at 90% while gimbal calibration, lift the front of the device into the air. and wait. CAUTION DO NOT FLY! change the angle of the bird, let the gimbal look up. The calibration will be 100%. When the errors are gone, flash the old version. You may have to do it from dji assistant 2.
[2023-03-28 21:44:49]
wag-on :
I'm not a mechanic! That's how I built my own plane. And yes the errors go away.
[2023-03-28 21:48:39]
wag-on :
If it doesn't work, try 09.09.0920 or contact the support team. Remember, it's your risk. If you're not entirely sure, clarify first.
[2023-03-28 22:53:48]
moyditumla :
Okay, thanks :)
I will keep my fingers crossed that I do not become the proud new owner of a brick XD
[2023-03-29 01:36:05]
jian_ :
jian_ joined the channel.
[2023-03-29 03:16:50]
moyditumla :
mcht, I re-read your message and realized I missed something the first time. When you say "contact the support team", did you mean the drone-hacks support, or DJI official support, or something else altogether?
[2023-03-29 12:18:38]
wag-on :
Contact the DDD support team. They have modified software. Don't be afraid, they will help you.
[2023-03-29 14:08:21]
lll769394 :
lll769394 joined the channel.
[2023-03-29 15:18:35]
moyditumla :
Well shit... somehow I accidentally upgraded to 02.04.2500
[2023-03-29 15:18:46]
moyditumla :
[2023-03-29 15:19:01]
moyditumla :
Thank you for you time, mcht
[2023-03-29 15:51:52]
cs2000 :
There is no DDD support team, there is me :joy: I cannot really give you any more info other than what is in the release notes though sorry, i literally just collect the files and make them available.
[2023-03-29 16:11:15]
gudvin :
is it possible that users, when checking firmware, will be able to give you information about its features, and you publish it in the description?
[2023-03-29 16:16:30]
cs2000 :
You and anyone else can always direct message me information and I will add/update it as needed yes
[2023-03-29 19:52:38]
decryptxor :
cipok46403 joined the channel.
[2023-03-29 22:27:22]
burak :
burak joined the channel.
[2023-03-30 00:45:41]
wag-on :
:handshake: :sweat_smile: I'm sorry about that. Don't worry, you won't get any more error codes. But researching for Dawgrade is fun and you can learn new things. :handshake: :sweat_smile:
[2023-03-30 03:46:16]
lontern :
lontern joined the channel.
[2023-03-30 05:40:46]
moyditumla :
Thank you for your hard work, team :)
[2023-03-30 05:45:20]
moyditumla :
yes, I will have to start digging in and researching more, it is not fun being stuck in firmware jail. Apparently in 02.04.2500 Remote ID cannot be disabled any more; it immediately re-enables.
I had some fun way back in the day hacking PSP firmware (playstation portable, anyone remember that thing? lol). But once encryption and signing gets involved... I'm a bit out of my depth I must admit
[2023-03-30 08:07:18]
jlkdjaf :
jlkdjaf joined the channel.
[2023-03-30 12:10:32]
oakley75 :
Yeah you're in a tough boat right now. I totally know that knot in your stomach now. Don't laugh, but are you able to refund and try another one? If so, I believe you can flash the firmware you want with DH, THEN activate it safely.
[2023-03-30 16:44:24]
rep_iv006 :
rep_iv006 joined the channel.
[2023-03-31 00:02:55]
moyditumla :
It's fine, I'll get over it :)\
[2023-03-31 15:48:07]
top7chip :
top7chip joined the channel.
[2023-03-31 15:53:03]
sawman :
sawman joined the channel.
[2023-03-31 21:10:51]
detynenko :
detynenko joined the channel.
[2023-04-01 12:52:15]
revlex23 :
revlex23 joined the channel.
[2023-04-01 13:39:19]
danil :
danil joined the channel.
[2023-04-02 11:06:45]
drone777 :
drone777 joined the channel.
[2023-04-02 13:37:39]
cyberfrog77 :
cyberfrog77 joined the channel.
[2023-04-02 21:13:43]
tacticaltot :
tacticaltot joined the channel.
[2023-04-04 13:49:26]
brillio :
brillio joined the channel.
[2023-04-04 20:38:10]
ipatch :
hello ? working with a laptop battery, wdx0r from dell inspiron 5567, and i believe the laptop wasn't turned for several years and the battery is completely drained. testing the + - leads on the 10 pin connector i see 0V. i tried connecting the battery to my pi4 using the sclk sdata and gnd pins of the battery but running the `i2cdetect` shows that nothing is connected.
doing a search across github for `BQ40370` the dji-firmware-tools are the only repo that actually mention this ti bq chip. from what i've read it's a custom chip designed for dell lipo batteries. i'm pretty much at impasse as to what to do next. open to suggestions. but if anybody knows how i can at least stat this battery to communicate with the bq chip inside i'd be greatful.
[2023-04-04 22:36:11]
wag-on :
:handshake: :smiley: It's now possible to downgrade. You're in luck
[2023-04-05 07:18:30]
tecno3 :
tecno3 joined the channel.
[2023-04-05 15:58:14]
moyditumla :
Hey. This place is pretty DJI-specific.
[2023-04-05 15:58:14]
moyditumla :
Hey. This place is pretty DJI-specific.
Do you have the pack opened up? Or are you just working from the connector pins?
I have revived other battery packs by opening them up an manually putting a little charge into each cell. Then, once there is enough power for the battery to charge itself, it might come back to life.
Or... the cells might be damaged an be unable to hold a charge.
At that point you can replace the individual dead cells, or just buy a used pack on ebay and save yourself 12 hours lol
[2023-04-05 15:58:14]
moyditumla :
Hey. This place is pretty DJI-specific.
Do you have the pack opened up? Or are you just working from the connector pins?
I have revived other battery packs by opening them up and manually putting a little charge into each cell. Then, once there is enough power for the battery to charge itself, it might come back to life.
Or... the cells might be damaged an be unable to hold a charge.
At that point you can replace the individual dead cells, or just buy a used pack on ebay and save yourself 12 hours lol
[2023-04-05 15:58:14]
moyditumla :
Hey. This place is pretty DJI-specific.
Do you have the pack opened up? Or are you just working from the connector pins?
I have revived other battery packs by opening them up and manually putting a little charge into each cell. Then, once there is enough power for the battery to charge itself, it might come back to life.
Or... the cells might be damaged and be unable to hold a charge.
At that point you can replace the individual dead cells, or just buy a used pack on ebay and save yourself 12 hours lol
[2023-04-05 15:58:14]
moyditumla :
Hey. This place is pretty DJI-specific.
Do you have the pack opened up? Or are you just working from the connector pins?
[2023-04-05 16:13:14]
moyditumla :
whaaaaat
Thanks for the heads up!
So the world does revolve around me... :thinking_face:
[2023-04-06 19:03:47]
loveyourself :
loveyourself joined the channel.
[2023-04-08 02:51:42]
tarikzhamid :
tarikzhamid joined the channel.
[2023-04-08 16:57:23]
walkooman :
walkooman joined the channel.
[2023-04-09 03:57:42]
ak_j :
ak_j joined the channel.
[2023-04-09 14:36:09]
scoobsteve :
scoobsteve joined the channel.
[2023-04-10 00:53:51]
zeroxdesign :
zeroxdesign joined the channel.
[2023-04-10 10:10:32]
g_g :
g_g joined the channel.
[2023-04-11 15:40:37]
blowfish448 :
blowfish448 joined the channel.
[2023-04-12 04:50:26]
djiiscool :
djiiscool joined the channel.
[2023-04-12 05:33:18]
jag :
jag joined the channel.
[2023-04-13 21:08:48]
sarah1333 :
sarah1333 joined the channel.
[2023-04-13 23:36:16]
lxcx2053 :
lxcx2053 joined the channel.
[2023-04-14 03:58:35]
machzeropointtwo :
machzeropointtwo joined the channel.
[2023-04-14 13:32:42]
yutremalto :
yutremalto joined the channel.
[2023-04-14 15:46:55]
skydiy :
skydiy joined the channel.
[2023-04-15 07:44:49]
djin :
djin joined the channel.
[2023-04-15 20:47:16]
mattkoloj :
mattkoloj joined the channel.
[2023-04-16 22:23:00]
thewizard :
thewizard joined the channel.
[2023-04-17 15:14:41]
helloworld123 :
helloworld123 joined the channel.
[2023-04-17 21:51:48]
hepan :
hepan joined the channel.
[2023-04-19 03:38:57]
tanjian :
tanjian joined the channel.
[2023-04-19 08:38:10]
kitty_798 :
kitty_798 joined the channel.
[2023-04-19 11:11:11]
kits :
kits joined the channel.
[2023-04-19 11:36:28]
dji1278 :
dji1278 joined the channel.
[2023-04-20 12:25:36]
aolas68 :
aolas68 joined the channel.
[2023-04-20 16:46:21]
s1m0n :
s1m0n joined the channel.
[2023-04-20 23:07:50]
rec00rsiff :
rec00rsiff joined the channel.
[2023-04-21 02:26:31]
helaobibi :
helaobibi joined the channel.
[2023-04-21 14:11:47]
oxkotb :
oxkotb joined the channel.
[2023-04-22 11:02:08]
ekate :
ekate joined the channel.
[2023-04-23 03:37:08]
jason_ma :
jason_ma joined the channel.
[2023-04-23 12:40:25]
torich :
torich joined the channel.
[2023-04-23 16:03:15]
shavell :
shavell joined the channel.
[2023-04-23 16:26:01]
dubs :
dubs joined the channel.
[2023-04-23 20:42:52]
deadalive :
deadalive joined the channel.
[2023-04-23 21:11:37]
deadalive :
Hi, i have the .dat format flight log retrieved through DJI Assistant from a Mini 3 Pro (wm162), is the aes key's to unscramble the .dat available somewhere?
[2023-04-24 02:54:08]
deadalive :
!wiki
[2023-04-24 02:54:08]
dji-rev-bot :
Did someone say wiki?
Our wiki site is located at http://wiki.dji-rev.com ... Many questions can be answered there. If you have any improvements or new content, you are encouraged to create or update anything that will help others.
[2023-04-24 02:54:34]
deadalive :
!DDD
[2023-04-24 02:54:34]
dji-rev-bot :
The DankDroneDownloader Windows EXE can be found here: https://github.com/cs2000/DankDroneDownloader
For all non-windows users, there is also a web browser based version here: http://dankdronedownloader.com/DDD2/app/
[2023-04-24 02:55:11]
deadalive :
!dji
[2023-04-24 02:55:11]
dji-rev-bot :
The monstrous DJI eye turns to face you....
[2023-04-24 08:00:01]
qwe96333 :
qwe96333 joined the channel.
[2023-04-25 08:11:59]
shefpolyanich :
shefpolyanich joined the channel.
[2023-04-25 08:54:49]
fedosgad :
Take a look at https://dji-rev.com/dji-rev/pl/nn9nf458j7n9ueu35nnm7m75oc , maybe it will help (I haven't tried this code).
[2023-04-25 10:05:07]
supertester :
supertester joined the channel.
[2023-04-25 11:16:01]
eleanor099 :
eleanor099 joined the channel.
[2023-04-25 14:12:08]
r4versa :
r4versa joined the channel.
[2023-04-25 15:02:04]
efimato_re :
anyone knows if unbinding of m3 can be done by replacing binded sn inside rc? inside of the drone itself
btw, speaking about replacing sn in rpmb... if e1e is running under android ~6, is it susceptible to dirty-cow 'ing files on ro-partitions?
[2023-04-25 15:02:04]
efimato_re :
anyone knows if unbinding of m3 can be done by replacing binded sn inside rc? instead of the drone itself
btw, speaking about replacing sn in rpmb... if e1e is running under android ~6, is it susceptible to dirty-cow 'ing files on ro-partitions?
[2023-04-25 15:02:04]
efimato_re :
anyone knows if unbinding of m3 can be done by replacing binded sn inside rc? instead of the drone itself
btw, speaking about replacing sn in drone's rpmb... if e1e is running under android ~6, is it susceptible to dirty-cow 'ing files on ro-partitions?
[2023-04-25 15:09:05]
r4versa :
Hello guys. Is there any way to patch my RC-N1 to use FCC mode? I have the Mini 3 Pro.
[5:21 PM](https://dji-rev.com/dji-rev/pl/pso4ohybd7rmx8oeeri4yncona)
I have heard there is a way using DJI Assistant
[2023-04-25 15:09:05]
r4versa :
Hello guys. Is there any way to patch my RC-N1 to use FCC mode? I have the Mini 3 Pro.
I have heard there is a way using DJI Assistant
[2023-04-26 14:41:42]
icanstillfly :
icanstillfly joined the channel.
[2023-04-26 14:58:50]
indimind :
indimind joined the channel.
[2023-04-26 19:14:11]
rudy103 :
rudy103 joined the channel.
[2023-04-26 22:18:20]
indimind :
what is the benefit from these apk versions offered here by the bot? as far as I can see it connects to a bunch of hosts around the world ...so ...?
[2023-04-26 22:32:02]
oakley75 :
They are free from Sec-Neo so you can modify them as you see fit.
[2023-04-26 23:01:54]
illwill :
illwill joined the channel.
[2023-04-26 23:22:47]
indimind :
figured it out. because of drone ID ;-)
[2023-04-27 05:47:12]
theminer :
theminer joined the channel.
[2023-04-27 07:57:47]
r3v0k3r :
r3v0k3r joined the channel.
[2023-04-27 09:45:46]
r3v0k3r :
!apk
[2023-04-27 09:45:46]
dji-rev-bot :
Due to security in modern browsers, you may need to Right Click and select 'Save Link As' to download these APK's
**DJI Fly 1.5.10:**
http://dji-rev.com:8080/APK/DJI_Fly-v1.5.10.apk
**DJI Fly 1.5.1:**
http://dji-rev.com:8080/APK/DJI_Fly-v1.5.1.apk
**Go4 4.1.22:**
http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.22_NoSecNeo.apk
**Go4 4.1.14:**
http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.14_NoSecNeo.apk
**Go4 4.1.15:**
http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.15_NoSecNeo.apk
**Go3:**
http://dji-rev.com:8080/APK/Go3-nosecneo.apk
[2023-04-27 09:49:31]
r3v0k3r :
which soft do you guys use to talk to UART at 500k baudrate over "service-link"? self-made?
[2023-04-27 10:09:23]
mymail :
mymail joined the channel.
[2023-04-27 14:35:11]
efimato_re :
check out putty
or minicom
[2023-04-28 13:02:02]
abdul.r.krij :
abdul.r.krij joined the channel.
[2023-04-28 15:17:12]
tony767 :
tony767 joined the channel.
[2023-04-29 05:50:25]
deltajulieteye :
deltajulieteye joined the channel.
[2023-04-29 08:39:33]
indimind :
Same issue here. What I figured out so far (not quite sure):
You need to downgrade RC-N1 to a fw version from aprox. mid 2022. No idea, if that is possible at all?
[2023-04-29 08:48:47]
indimind :
The other method is via app (tw, dh). Not sure what they do. I assume that they write some bytes to the RC (eg. disabling country code check). At least this is the method I´ve seen in the decompiled java code in the mavic air2.apk.
But personaly don´t like the idea to give anyone any serials and other data.
If anybody out there could give futher assistance ...:yellow_heart:
[2023-04-29 08:48:47]
indimind :
The other method is via app (tw, dh). Not sure what they do. I assume that they write some bytes to the RC (eg. disabling country code check) or prevent the fly app from doing something (spoofing?). At least the first method I saw in the decompiled java code in the mavic air2.apk.
But personaly don´t like the idea to give anyone any serials and other data.
If anybody out there could give futher assistance ...:yellow_heart:
[2023-04-29 08:48:47]
indimind :
The other method is via app (tw, dh). Not sure what they do. I assume that they write some bytes to the RC (eg. disabling country code check) or prevent the fly app from doing something (spoofing?). The first method I saw in the decompiled java code in the mavic air2.apk and seemd to work on RC-N1 with fw till mid of 2022.
But personaly don´t like the idea to give anyone any serials and other data.
If anybody out there could give futher assistance ...:yellow_heart:
[2023-04-29 08:48:47]
indimind :
The other method is via app (tw, dh). Not sure what they do. I assume that they write some bytes to the RC (eg. disabling country code check). At least this is the approach I´ve seen in the decompiled java code in the mavic air2.apk.
But personaly don´t like the idea to give anyone any serials and other data.
[2023-04-29 08:48:47]
indimind :
The other method is via app (tw, dh). Not sure what they do. I assume that they write some bytes to the RC (eg. disabling country code check). At least this is the method I´ve seen in the decompiled java code in the mavic air2.apk.
But personaly don´t like the idea to give anyone any serials and other data.
If anybody out there could help ...:yellow_heart:
[2023-04-29 08:48:47]
indimind :
The other method is via app (tw, dh). Not sure what they do. I assume that they write some bytes to the RC (eg. disabling country code check) or prevent the fly app from doing something (spoofing?). The first method I saw in the decompiled java code in the mavic air2.apk and seemed to work on RC-N1 with fw till mid of 2022.
To give someone a few bucks for the work is OK, but personally don´t like the idea to give anyone any serials and other data.
If anybody out there could give futher assistance ...:yellow_heart:
[2023-04-29 15:22:38]
ronan6776 :
ronan6776 joined the channel.
[2023-05-01 14:12:20]
tavinci :
tavinci joined the channel.
[2023-05-02 00:38:44]
alexbalestrin :
alexbalestrin joined the channel.
[2023-05-02 07:50:12]
deadalive :
@fedosgad thank you for the help, the files i have extracted seems to be not of this format though. I have been looking for the AES Key and IV the FTP server in Mini 3 Pro (wm162).
[2023-05-02 13:46:34]
oakley75 :
You could try this just in case it works. Mini3 is probably too new, but I'd give it a shot anyway. I'm not sure if Mike Singer wrote this or not, but he is fairly trustworthy when it comes to this flight log reader. YMMV
[2023-05-02 13:46:34]
oakley75 :
You could try this just in case it works. Mini3 is probably too new, but I'd give it a shot anyway. I'm not sure if Mike Singer wrote this or not, but he is fairly trustworthy when it comes to his flight log reader. YMMV
[2023-05-02 13:46:38]
oakley75 :
https://datfile.net/DatCon/intro.html
[2023-05-02 14:29:37]
williamb2023 :
williamb2023 joined the channel.
[2023-05-02 15:51:28]
zandan :
zandan joined the channel.
[2023-05-02 19:43:10]
artstyle :
artstyle joined the channel.
[2023-05-03 04:28:25]
lepuss :
lepuss joined the channel.
[2023-05-03 09:50:49]
dsmith :
dsmith joined the channel.
[2023-05-03 18:42:05]
vinc13008 :
vinc13008 joined the channel.
[2023-05-03 19:39:57]
marcosscriven :
marcosscriven joined the channel.
[2023-05-03 19:43:28]
marcosscriven :
I've just been looking at the firmware decryption code at https://github.com/o-gs/dji-firmware-tools/blob/master/dji_imah_fwsig.py - it's fairly clear how it works - but I have no idea how they got hold of the various keys. Is there some client-side software they decompiled and got these from?
[2023-05-03 23:31:52]
tanner :
tanner joined the channel.
[2023-05-04 14:26:17]
jay :
jay joined the channel.
[2023-05-04 16:58:23]
statistic :
statistic joined the channel.
[2023-05-05 00:24:22]
actc :
actc joined the channel.
[2023-05-05 13:30:55]
vijay04 :
vijay04 joined the channel.
[2023-05-05 19:35:16]
dave1 :
dave1 joined the channel.
[2023-05-05 21:48:23]
cloudwerx :
Nope, they were leaked by DJI employees
[2023-05-06 11:37:40]
ajdrools :
ajdrools joined the channel.
[2023-05-07 12:49:19]
alex_9 :
alex_9 joined the channel.
[2023-05-07 14:10:02]
bin_ly :
c_schiwy joined the channel.
[2023-05-08 17:17:03]
unknownmark :
unknownmark joined the channel.
[2023-05-09 03:04:51]
jett :
jett joined the channel.
[2023-05-09 15:20:38]
dc_dep :
dc_dep joined the channel.
[2023-05-10 16:12:13]
kasztan :
kasztan joined the channel.
[2023-05-10 22:47:23]
alash :
alash joined the channel.
[2023-05-10 23:03:26]
alash :
alash joined the channel.
[2023-05-11 02:09:56]
huynguyen :
huynguyen joined the channel.
[2023-05-11 06:02:52]
saeidhp :
saeidhp joined the channel.
[2023-05-11 06:03:47]
mndji :
mndji joined the channel.
[2023-05-11 11:35:28]
bongihitti :
bongihitti joined the channel.
[2023-05-12 08:59:45]
ant :
ant joined the channel.
[2023-05-12 15:42:00]
alexandr :
alexandr joined the channel.
[2023-05-14 11:18:08]
joelg :
joelg joined the channel.
[2023-05-15 09:15:44]
speedycode :
speedycode joined the channel.
[2023-05-15 11:06:32]
raphael :
raphael joined the channel.
[2023-05-15 13:58:35]
beavmon :
beavmon joined the channel.
[2023-05-16 12:55:16]
rabbitambulance :
rabbitambulance joined the channel.
[2023-05-16 22:11:35]
kalor17 :
kalor17 joined the channel.
[2023-05-17 09:00:18]
igmar :
igmar joined the channel.
[2023-05-18 01:44:16]
brucegu :
brucegu joined the channel.
[2023-05-18 17:14:27]
spider23 :
spider23 joined the channel.
[2023-05-18 20:10:42]
ximojos876 :
ximojos876 joined the channel.
[2023-05-19 03:05:09]
t6x :
t6x joined the channel.
[2023-05-19 09:53:58]
anh6266 :
anh6266 joined the channel.
[2023-05-19 17:20:34]
draceus :
draceus joined the channel.
[2023-05-19 17:22:45]
draceus :
Hey I have a mini 3 pro with and the controller with an integrated screen. Is there any way for me to unlock FCC mode? Every tutorial I find is using the controller with a phone / tablet attached.
[2023-05-21 01:48:58]
revnmavic :
revnmavic joined the channel.
[2023-05-23 14:02:03]
dddyjs :
dddyjs joined the channel.
[2023-05-23 16:08:49]
juicemein :
juicemein joined the channel.
[2023-05-23 21:04:01]
iz_zi :
iz_zi joined the channel.
[2023-05-24 09:49:28]
magicianlz :
magicianlz joined the channel.
[2023-05-26 09:34:54]
g4lxy :
g4lxy joined the channel.
[2023-05-27 05:16:14]
drmsucks :
drmsucks joined the channel.
[2023-05-27 09:46:57]
droneztr :
droneztr joined the channel.
[2023-05-27 13:08:05]
lishujian3 :
lishujian3 joined the channel.
[2023-05-27 19:40:41]
noble5836 :
noble5836 joined the channel.
[2023-05-28 21:25:11]
danijel :
danijel joined the channel.
[2023-05-30 00:12:34]
nicksapienza :
nicksapienza joined the channel.
[2023-05-30 06:45:24]
qgig :
qgig joined the channel.
[2023-05-31 03:34:11]
amp822 :
amp822 joined the channel.
[2023-05-31 09:16:43]
ggc :
ggc joined the channel.
[2023-05-31 14:13:56]
jimmyjo :
jimmyjo joined the channel.
[2023-05-31 15:50:59]
punishman :
punishman joined the channel.
[2023-06-03 07:50:46]
gantarone :
gantarone joined the channel.
[2023-06-04 20:38:11]
eddyflash :
eddyflash joined the channel.
[2023-06-05 01:37:19]
meowmeow :
meowmeow joined the channel.
[2023-06-05 18:01:25]
districtdave :
districtdave joined the channel.
[2023-06-05 19:47:39]
tolma4 :
tolma4 joined the channel.
[2023-06-05 23:28:29]
nedremista :
nedremista joined the channel.
[2023-06-05 23:31:20]
nedremista :
Hi, got DJI Mavic Air 2 firmware version 01.01.0920, would like to unlock NFZ and altitude, are ther any methods? I saw drone-hacks can do that, but is it possible to revert to version 01.01.0610 thru DankDroneDownloader or other software?
To avoid broadcasting any info data, is CIAJeepDoors the only option to avoid broadcasting drone data? Would it still work with firmware version 01.01.0920 or 01.01.0610?
Thank you
[2023-06-06 00:06:28]
alt.nq-5711k93 :
Hi, droneid will be reset is you use a recent version of DJI Fly (after 1.5.10), but this old version is only working on devices with Android < version 13
[2023-06-06 00:10:19]
alt.nq-5711k93 :
moreover firmware version 01.01.0920 has anti-rollback value at 6, the version 01.01.0610 has anti-rollback at 2 => you won't be able to downgrade your bird
[2023-06-06 00:15:39]
alt.nq-5711k93 :
Hi, frankly, buy the Drone Hacks licence, you'll earn a lot of time !
There aren't many boards where this kind of information is shared, save your time.
[2023-06-06 08:04:46]
nobody :
nobody joined the channel.
[2023-06-06 15:13:22]
benoit :
benoit joined the channel.
[2023-06-08 20:52:48]
ph01 :
ph01 joined the channel.
[2023-06-08 21:49:30]
meowmeow :
Hello is the actual hardware on the mini 3 pro different from the mini 3. I understand that there are additional sensors, but is the motherbaord the same on both of the units?
[2023-06-08 22:10:15]
stanlee :
Mini 3 pro also has Occusync 3. Mini 3 is Occusync 2. Seems to me a hardware difference in transmission.
[2023-06-08 22:25:30]
meowmeow :
understood, but in terms of the motherboard it should be the same? I am going to try to decompile the pro firmware and see if the active track/follow would work on the 3 non pro, as well as the other video modes that seem to only be software limited
[2023-06-09 07:01:21]
tmbinc :
they are very different. Mini 3 is essentially a Mini 2 with a better sensor, whereas Mini 3 Pro is essentially an Air 2s in a smaller form factor.
Mini 3 is Ambarella-based, and - afaik - uses host-based ML for quickshots, whereas Mini 3 Pro does that on-board
[2023-06-09 09:25:40]
cillen :
cillen joined the channel.
[2023-06-09 11:43:21]
diddyer :
diddyer joined the channel.
[2023-06-09 21:33:41]
meowmeow :
ok so that is interesting to know. This is all new to me but the motherboard appears very similar. https://github.com/o-gs/dji-firmware-tools/wiki/WM162-Main-Processing-Core-Board (states mini 3, no comment or pro or not. Mini 3 firmware has wm163 not wm162) the mini 3 pro motherboard looks exactly like this https://www.youtube.com/watch?v=Hsl-yLi0Qao&t=491s ~8:10 unless these are both the mini 3 motherboard.
[2023-06-09 21:40:57]
meowmeow :
also https://www.maisondudrone.com/en/dji-mini-3-vs-mini-3-pro-what-are-the-differences/ Both drones are equipped with the same camera with the same sensor, except that the Mini 3’s is “limited” to 12MP, while the Mini 3 Pro’s can go up to 48 MP. So we have a better photo quality on the Pro version. the 48PM mode has already been unlocked in an official firmware update, the video features should be possible to be modified no?
[2023-06-09 21:40:57]
meowmeow :
also https://www.maisondudrone.com/en/dji-mini-3-vs-mini-3-pro-what-are-the-differences/ Both drones are equipped with the same camera with the same sensor, except that the Mini 3’s is “limited” to 12MP, while the Mini 3 Pro’s can go up to 48 MP. So we have a better photo quality on the Pro version.
[2023-06-10 00:38:39]
tmbinc :
wm162 is Mini 3 Pro, wm163 is Mini 3
[2023-06-10 22:40:30]
blablabrscht :
blablabrscht joined the channel.
[2023-06-11 09:56:47]
a5580258 :
a5580258 joined the channel.
[2023-06-11 15:15:08]
kitty_798 :
Who will force firmware downgrade for Mavic 2 Industry Edition? I'm willing to spend.
[2023-06-11 18:26:20]
vladjke :
vladjke joined the channel.
[2023-06-12 11:19:14]
shaylee_z0730 :
shaylee_z0730 joined the channel.
[2023-06-13 07:20:56]
m18837132273 :
m18837132273 joined the channel.
[2023-06-14 07:16:14]
make3690. :
make3690. joined the channel.
[2023-06-14 13:56:01]
lorebene99 :
lorebene99 joined the channel.
[2023-06-14 13:59:14]
sickmanny :
sickmanny joined the channel.
[2023-06-15 13:15:00]
malteia :
malteia joined the channel.
[2023-06-16 06:41:31]
donnaarcama :
donnaarcama joined the channel.
[2023-06-16 09:10:35]
jhjh :
jhjh joined the channel.
[2023-06-16 11:32:56]
dronerend :
dronerend joined the channel.
[2023-06-16 20:50:55]
fix9527 :
fix9527 joined the channel.
[2023-06-16 22:16:55]
nikgmp :
nikgmp joined the channel.
[2023-06-17 14:19:29]
salajander :
salajander joined the channel.
[2023-06-17 19:54:19]
bobthebuilder :
bobthebuilder joined the channel.
[2023-06-18 08:02:57]
tomtastic :
tomtastic joined the channel.
[2023-06-18 13:33:04]
aezxela :
aezxela joined the channel.
[2023-06-18 14:29:29]
vlad :
vlad joined the channel.
[2023-06-18 20:18:56]
kaizendron :
kaizendron joined the channel.
[2023-06-19 01:02:37]
audity :
audity joined the channel.
[2023-06-19 02:13:01]
realsung :
realsung joined the channel.
[2023-06-19 11:12:45]
fadetonoir :
fadetonoir joined the channel.
[2023-06-19 23:11:17]
martymcfly :
martymcfly joined the channel.
[2023-06-20 08:13:14]
kitsune :
kitsune joined the channel.
[2023-06-21 02:39:34]
nglyun :
nglyun joined the channel.
[2023-06-21 06:56:10]
p763333454 :
p763333454 joined the channel.
[2023-06-22 00:30:43]
juhwan :
juhwan joined the channel.
[2023-06-22 07:11:32]
emmettbosco :
emmettbosco joined the channel.
[2023-06-22 20:21:28]
vladho :
vladho joined the channel.
[2023-06-23 13:01:29]
classic16v :
classic16v joined the channel.
[2023-06-23 16:32:07]
dronomo :
dronomo joined the channel.
[2023-06-24 23:45:15]
slist1992 :
slist1992 joined the channel.
[2023-06-25 19:37:58]
uskve :
hey folks!
I've found out that you can save en "emergency log" to the sdcard via autoexec.ash with the command
t dji elog save e:\elog.txt
However these logfiles seem tob e masked/encrypted. By chance I've found a logfile which was finally cleartext and not encrypted but couldnt reproduce that behaviour. Do you have any idea how to achieve that? Thank you very much!
[2023-06-25 19:40:37]
uskve :
Interestingly 0x40003000.dji is contained within the rtos firmware as a string, however sadly no readable logfile is written after its presence to misc\log
[2023-06-26 08:49:15]
tmbinc :
On mini2, I can see two things:
- "%c:\\%sdjilog%04d-%02d-%02d_%02d-%02d-%02d_emergency.log" being saved, with some weird scheme that ultimately XORs data(?) with 0xEECCBBAA
- the shell "t dji elog" handler, which basically just captures this emergency buffer and writes it to disk, without modifications. 0x80000 bytes at 0x1B6841B4
but i'm not sure what's actually in there
[2023-06-26 08:51:16]
tmbinc :
The first one is triggered apparently by the right reset reason
[2023-06-26 12:03:15]
virusz :
virusz joined the channel.
[2023-06-26 13:28:27]
ukrock1990 :
ukrock1990 joined the channel.
[2023-06-26 17:17:54]
mbarekgzize :
mbarekgzize joined the channel.
[2023-06-27 03:25:36]
harryyy :
harryyy joined the channel.
[2023-06-27 08:43:24]
lincoln2330 :
lincoln2330 joined the channel.
[2023-06-27 13:18:25]
iondoog :
iondoog joined the channel.
[2023-06-27 20:15:21]
mc1980 :
mc1980 joined the channel.
[2023-06-27 20:41:00]
arachne :
arachne joined the channel.
[2023-06-28 00:30:02]
slist1992 :
slist1992 joined the channel.
[2023-06-29 14:51:46]
qwertyuiop :
qwertyuiop joined the channel.
[2023-06-30 16:55:32]
remotelyidentified :
remotelyidentified joined the channel.
[2023-07-01 11:54:35]
m1dy :
m1dy joined the channel.
[2023-07-01 16:47:27]
z1904631987 :
z1904631987 joined the channel.
[2023-07-01 18:40:17]
daniel_lee :
daniel_lee joined the channel.
[2023-07-02 00:51:16]
z1904631987 :
谁能帮我解锁dji的飞丢认证解绑，我会有付给他报酬！
微信号：zss0539110
[2023-07-03 15:09:28]
heathcliff :
heathcliff joined the channel.
[2023-07-03 16:52:56]
rossi46 :
rossi46 joined the channel.
[2023-07-04 18:58:12]
tonik :
tonik joined the channel.
[2023-07-04 20:48:44]
matteoardu :
matteoardu joined the channel.
[2023-07-05 02:25:23]
andrei4445 :
andrei4445 joined the channel.
[2023-07-05 03:54:32]
lukashfreedom2 :
lukashfreedom2 joined the channel.
[2023-07-06 07:58:06]
gg66 :
gg66 joined the channel.
[2023-07-06 10:10:58]
ghgh :
ghgh joined the channel.
[2023-07-06 15:57:05]
sp4rk :
sp4rk joined the channel.
[2023-07-06 16:12:47]
xiaoqi :
xiaoqi joined the channel.
[2023-07-07 00:16:58]
funbob :
funbob joined the channel.
[2023-07-08 07:11:07]
linstrom85 :
linstrom85 joined the channel.
[2023-07-09 06:52:45]
t12 :
t12 joined the channel.
[2023-07-09 13:48:51]
androidfly :
androidfly joined the channel.
[2023-07-12 11:51:53]
psychx :
psychx joined the channel.
[2023-07-13 13:06:01]
porox :
porox joined the channel.
[2023-07-13 18:39:30]
wooz :
wooz joined the channel.
[2023-07-14 13:17:45]
lephuong787 :
lephuong787 joined the channel.
[2023-07-15 00:27:01]
ct253 :
ct253 joined the channel.
[2023-07-16 17:29:42]
uskve :
Hi.Ive tried to find amba shell UART tx/rx on the osmo action v1 board. Ive started with checking all the ground pins offline and moved to to look for the ones providing voltage around 3.3v and taking samples with a logic analyzer (salae logic8). from the fimware it seemed to me that the baudrate I should expect is 115200
[2023-07-16 17:32:55]
uskve :
I was hoping that that 2x2 pins at one of the corners might be it: vcc,gnd,tx,rx but couldnt figure it out yet. i can upload some board pictures
[2023-07-16 17:34:02]
uskve :
could you give me some pointers on how did you manage to locate that serial shell on other boards & if some kind of activation / enable was required ?
[2023-07-16 17:46:37]
uskve :
The 4 pins I've talked about are the ones on the lower right corner
[2023-07-16 17:50:35]
uskve :
FCC photo of the board:
[2023-07-16 18:25:17]
tmbinc :
Check the unused/unpopulated header, that's the debug header. However, console TX may be disabled
[2023-07-16 18:59:17]
stryker13fox :
stryker13fox joined the channel.
[2023-07-16 20:29:16]
uskve :
well its only unpopulated because ive detached it; thats the front facing display
[2023-07-16 20:29:16]
uskve :
well its only unpopulated because ive detached it; thats the front facing display connector (sorry forgot to mention it)
[2023-07-17 08:01:36]
tmbinc :
This one?
[2023-07-17 08:18:50]
uskve :
no, I was talking about the bottom-left corner
[2023-07-17 08:20:23]
uskve :
I didnt realize thats it. what kind of header that might be? (guess easier connection is to press a header against it then test probe 1by1)
[2023-07-17 09:17:01]
tmbinc :
I'll just probe/solder to it. It's tricky to get the right header and even then you'd need a flex cable or something to actually attach to it :/
[2023-07-17 10:40:35]
uskve :
Ah I see. that header seems to be populated on the fcc board :)
[2023-07-17 10:44:06]
tmbinc :
Heh yes that's typical
[2023-07-17 11:18:18]
uskve :
https://cdn.shopify.com/s/files/1/0263/8469/5395/files/RCGeeks-Osmo-Action-Teardown-copper-heat-spreader-removed-1200x801.jpg
[2023-07-20 09:02:50]
masskiller :
masskiller joined the channel.
[2023-07-20 10:59:55]
pigeon :
nu11plex joined the channel.
[2023-07-20 22:31:10]
karthor :
karthor joined the channel.
[2023-07-21 08:24:42]
kvintal4 :
kvintal4 joined the channel.
[2023-07-21 08:32:42]
barisnet :
barisnet joined the channel.
[2023-07-21 08:45:26]
luosiyon :
luosiyon joined the channel.
[2023-07-21 09:17:43]
dxasqw :
dxasqw joined the channel.
[2023-07-21 21:57:52]
deandean :
deandean joined the channel.
[2023-07-22 15:33:56]
madboy :
madboy joined the channel.
[2023-07-24 00:06:08]
dji-rev.concierge132 :
dji-rev.concierge132 joined the channel.
[2023-07-24 12:19:13]
coutz :
coutz joined the channel.
[2023-07-25 00:42:48]
jcwtw03 :
jcwtw03 joined the channel.
[2023-07-25 03:04:38]
yuanyang569 :
yuanyang569 joined the channel.
[2023-07-26 06:48:04]
juvatos :
juvatos joined the channel.
[2023-07-26 08:22:59]
art024 :
art024 joined the channel.
[2023-07-26 11:41:49]
mopheus :
mopheus joined the channel.
[2023-07-27 08:16:39]
bromik :
bromik joined the channel.
[2023-07-27 08:20:01]
hawketallweiss :
hawketallweiss joined the channel.
[2023-07-27 14:59:34]
zuchmir33 :
zuchmir33 joined the channel.
[2023-07-27 23:14:49]
mal :
mal joined the channel.
[2023-07-28 01:59:55]
smartjq :
smartjq joined the channel.
[2023-07-28 06:41:20]
dreamtree :
dreamtree joined the channel.
[2023-07-28 07:47:42]
mobimore :
mobimore joined the channel.
[2023-07-29 19:52:58]
drfailov :
drfailov joined the channel.
[2023-07-30 09:52:40]
qgigig :
qgigig joined the channel.
[2023-07-30 20:42:03]
stermo :
stermo joined the channel.
[2023-07-31 06:37:14]
vcka :
vcka joined the channel.
[2023-07-31 14:30:05]
bignigger :
bignigger joined the channel.
[2023-08-01 15:27:37]
sachinkew :
sachinkew joined the channel.
[2023-08-02 05:46:18]
x672390794 :
x672390794 joined the channel.
[2023-08-02 05:48:40]
x672390794 :
@x672390794 left the channel.
[2023-08-02 22:54:55]
razorfish :
razorfish joined the channel.
[2023-08-03 10:38:47]
sagfddfdsdffsd :
sagfddfdsdffsd joined the channel.
[2023-08-03 13:27:54]
viz3r :
viz3r joined the channel.
[2023-08-04 11:03:55]
cns :
cns joined the channel.
[2023-08-05 01:53:01]
indianagunworx :
indianagunworx joined the channel.
[2023-08-05 20:55:15]
vgss :
vgss joined the channel.
[2023-08-06 03:31:11]
redberet :
redberet joined the channel.
[2023-08-08 01:03:31]
chaosua :
chaosua joined the channel.
[2023-08-08 10:22:02]
kkcomiphone6 :
kkcomiphone6 joined the channel.
[2023-08-09 11:14:11]
bmsleight :
bmsleight joined the channel.
[2023-08-09 15:25:40]
anyaker :
anyaker joined the channel.
[2023-08-09 17:08:56]
negual :
negual joined the channel.
[2023-08-09 19:07:04]
ceasser :
ceasser joined the channel.
[2023-08-09 19:08:29]
ngmedar :
ngmedar joined the channel.
[2023-08-10 13:17:07]
dzo :
dzo joined the channel.
[2023-08-11 12:29:17]
aleksmcw :
aleksmcw joined the channel.
[2023-08-12 05:24:07]
freespirits :
freespirits joined the channel.
[2023-08-12 20:29:53]
deonisray :
deonisray joined the channel.
[2023-08-12 21:22:57]
mimokrokodil :
mimokrokodil joined the channel.
[2023-08-12 22:11:05]
convair :
convair joined the channel.
[2023-08-13 04:36:37]
voidvoid :
voidvoid joined the channel.
[2023-08-13 06:13:37]
paulkh. :
paulkh. joined the channel.
[2023-08-13 22:06:39]
elrojo :
elrojo joined the channel.
[2023-08-14 04:30:22]
aino591 :
aino591 joined the channel.
[2023-08-15 15:58:18]
mstone :
mstone joined the channel.
[2023-08-16 07:04:04]
xwy520. :
xwy520. joined the channel.
[2023-08-16 09:04:49]
zy870621 :
zy870621 joined the channel.
[2023-08-17 00:24:35]
nasteb93 :
nasteb93 joined the channel.
[2023-08-17 09:14:40]
sirsss :
sirsss joined the channel.
[2023-08-17 10:10:51]
weixug :
weixug joined the channel.
[2023-08-17 21:53:05]
zonkey :
zonkey joined the channel.
[2023-08-18 06:24:38]
parkerparker :
parkerparker joined the channel.
[2023-08-18 07:03:45]
whatisinmydrone :
whatisinmydrone joined the channel.
[2023-08-18 07:44:57]
apple :
apple joined the channel.
[2023-08-18 16:40:42]
thepaladin4488 :
thepaladin4488 joined the channel.
[2023-08-18 18:22:45]
swansandre :
swansandre joined the channel.
[2023-08-19 17:38:09]
aesurvey :
aesurvey joined the channel.
[2023-08-20 01:49:28]
benjinator :
benjinator joined the channel.
[2023-08-20 03:40:14]
royarms :
royarms joined the channel.
[2023-08-21 21:35:38]
salz :
salz joined the channel.
[2023-08-22 01:47:21]
meowmeow :
is there any other way besides dji support to unbind a mini 3 pro from a previous account?
[2023-08-23 05:36:02]
wganss :
wganss joined the channel.
[2023-08-24 11:31:31]
anncc :
anncc joined the channel.
[2023-08-24 13:14:51]
seeyouas :
seeyouas joined the channel.
[2023-08-24 15:14:05]
xujianwei12345 :
xujianwei12345 joined the channel.
[2023-08-24 18:51:42]
bengutt :
bengutt joined the channel.
[2023-08-25 03:01:18]
charliechoi :
charliechoi joined the channel.
[2023-08-26 09:33:19]
bandarradji :
bandarradji joined the channel.
[2023-08-26 16:58:36]
vicanic :
vicanic joined the channel.
[2023-08-26 22:05:04]
alohaman :
alohaman joined the channel.
[2023-08-27 19:22:56]
einsteinsu :
einsteinsu joined the channel.
[2023-08-27 21:00:57]
dburg :
dburg joined the channel.
[2023-08-28 02:45:16]
ray5581 :
ray5581 joined the channel.
[2023-08-28 03:46:51]
mako918 :
mako918 joined the channel.
[2023-08-29 21:03:15]
arriterx :
arriterx joined the channel.
[2023-08-30 02:03:00]
jeremybearimy20 :
jeremybearimy20 joined the channel.
[2023-08-30 22:59:33]
zinho :
zinho joined the channel.
[2023-09-02 13:44:43]
wangjie :
wangjie joined the channel.
[2023-09-03 08:44:01]
aouuau53 :
aouuau53 joined the channel.
[2023-09-04 01:17:21]
izjustforfun :
izjustforfun joined the channel.
[2023-09-04 05:52:29]
alexgr :
alexgr joined the channel.
[2023-09-04 11:27:54]
aidanhughes :
aidanhughes joined the channel.
[2023-09-04 13:39:22]
cyan :
cyan joined the channel.
[2023-09-04 21:52:03]
fagner_silva :
fagner_silva joined the channel.
[2023-09-05 20:48:39]
grantpal :
grantpal joined the channel.
[2023-09-07 08:20:09]
bove :
bove joined the channel.
[2023-09-08 16:49:23]
dong :
dong joined the channel.
[2023-09-09 11:35:02]
alexrd :
alexrd joined the channel.
[2023-09-09 23:49:31]
guowang :
guowang joined the channel.
[2023-09-11 03:38:13]
fair2s :
fair2s joined the channel.
[2023-09-11 15:23:02]
woland :
woland joined the channel.
[2023-09-12 08:57:16]
o12_1o11 :
o12_1o11 joined the channel.
[2023-09-12 18:34:10]
humnar :
humnar joined the channel.
[2023-09-12 19:07:33]
nazar-007 :
dronix joined the channel.
[2023-09-13 10:08:35]
molda :
molda joined the channel.
[2023-09-13 20:24:23]
xenovis :
xenovis joined the channel.
[2023-09-15 13:06:29]
vmcgee2 :
vmcgee2 joined the channel.
[2023-09-16 18:45:06]
septianyudhiwicaksono :
septianyudhiwicaksono joined the channel.
[2023-09-17 10:54:40]
dimmxx :
dimmxx joined the channel.
[2023-09-17 11:04:14]
phillyh :
phillyh joined the channel.
[2023-09-17 19:53:43]
johndohn :
johndohn joined the channel.
[2023-09-18 06:57:26]
kyokushin :
Guys, i am going to buy used mini 2. I have hacked spark and p3p... after few years of break i am gonna back to hobby. is mini 2 a good choice in matter of NFZ and aeroscope removal?
[2023-09-18 12:00:57]
cs2000 :
In terms of NFZ, yeah anything upto 01.07.0200 can be hacked to remove NFZ. Aeroscope is a little more tricky. I don't think anyone has or is working on any kind of aeroscope removal/hiding methods currently.
[2023-09-18 15:39:32]
baxove :
But isn't CIAJeepDoors still working on Mini 2 with Fly app version 15.10 and lower? I know it doesn't remove broadcast to Aeroscope but it sends out fake data, or at least I thought so.
[2023-09-18 18:58:27]
kyokushin :
fji fly is enabling it again, but Litchi can be used instead of this
[2023-09-19 00:12:49]
jpgraphics :
jpgraphics joined the channel.
[2023-09-19 01:24:38]
dji-rev.concierge132 :
Litchi is also re-enabling it again. It's the new DJI SDK that is at fault here, so any third party apps that use newer SDK will re-enable it
[2023-09-19 06:31:36]
baxove :
Are you sure it does on the Mini 2? My privacy bits doesn't reset when using DJI Fly 15.10. It does reset when I use a more recent Fly app though. My drone fw is 01.03.0500.
[2023-09-19 14:22:18]
leperdu :
leperdu joined the channel.
[2023-09-20 02:40:21]
idone :
idone joined the channel.
[2023-09-20 06:54:33]
kyokushin :
good to know. So which version of Fly app will be suitable, 15.10 and lower?
[2023-09-20 06:54:33]
kyokushin :
good to know. So which version of Fly app will be suitable, for Android and iOS?
[2023-09-20 06:54:33]
kyokushin :
good to know. So which version of Fly app or Litchi will be suitable, for Android and iOS?
[2023-09-20 06:54:33]
kyokushin :
good to know. So which version of Fly app or Litchi will be suitable, for Android and iOS?
Or maybe there is other app that will fit?
[2023-09-20 10:29:32]
baxove :
I don't know about iOS, but on Andriod, you can use DJI Fly 15.10 or earlier. This will only work on Android 12 and lower. As far as I know, it will crash the app on Android 13. As for Litchi, you can use v4.25.0-g and lower. Higher version of Litchi will reset the privacy bits on the Mini 2. I haven't tried other apps than DJI Fly and Litchi.
[2023-09-20 12:35:56]
kyokushin :
Thank you. I found old Samsung A40 so i will use it instead of iphone. I have bought a Litchi. Do you know how to download older version?
[2023-09-20 12:35:56]
kyokushin :
Thank you. I found old Samsung A40 so i will use it instead of iphone
[2023-09-20 12:35:56]
kyokushin :
Thank you. I found old Samsung A40 so i will use it instead of iphone. I have bought a Litchi. Do you know how to download older version? Do we have some dji fly patched version as we had dji go for sparks?
[2023-09-20 15:05:02]
oakley75 :
!apk
use Fly 1.5.10
Use Litchi 4.25
use https://github.com/Bin4ry/deejayeye-modder to mod GO4 4.1.22 for your spark
[2023-09-20 15:05:02]
oakley75 :
!apk
use Fly 1.5.10
Use Litchi 4.25
use https://github.com/Bin4ry/deejayeye-modder to mod GO4 for your spark
[2023-09-20 15:05:02]
oakley75 :
!apk
[2023-09-20 15:05:02]
dji-rev-bot :
Due to security in modern browsers, you may need to Right Click and select 'Save Link As' to download these APK's
**DJI Fly 1.5.10:**
http://dji-rev.com:8080/APK/DJI_Fly-v1.5.10.apk
**DJI Fly 1.5.1:**
http://dji-rev.com:8080/APK/DJI_Fly-v1.5.1.apk
**Go4 4.1.22:**
http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.22_NoSecNeo.apk
**Go4 4.1.14:**
http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.14_NoSecNeo.apk
**Go4 4.1.15:**
http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.15_NoSecNeo.apk
**Go3:**
http://dji-rev.com:8080/APK/Go3-nosecneo.apk
**Litchi 4.25:**
http://dji-rev.com:8080/APK/Litchi_4.25.apk
[2023-09-20 16:50:05]
kyokushin :
thanx, spark is fully modded already, but i am going to sell p3p and spark and stick on mini2. What is difference between DJI Fly 1.5.10 and 1.5.1 ? I mean its no matter or there is some important difference?
[2023-09-20 16:52:39]
kyokushin :
Whats the best way to remove NFZ permanently?
[2023-09-20 16:52:39]
kyokushin :
@cs2000 Whats the best way to remove NFZ permanently? Its possible to place own cert fake/server or something different?
[2023-09-20 16:52:39]
kyokushin :
Whats the best way to remove NFZ permanently? Its possible to place own cert fake/server or something different?
[2023-09-20 17:14:46]
oakley75 :
the 1.5.1 apk here is an official apk from the play store. the 1.5.10 is the latest you can use but it came from someone's repository. thats all really
fyi i was talking about modding the go4 app to remove the spying, login etc but also to remove the nfz color zones as the app will still display those even tho you can fly in them.
[2023-09-20 17:14:46]
oakley75 :
the 1.5.1 apk here is an official apk from the play store. the 1.5.10 is the latest you can use but it came from someone's repository so not positive of its source. thats all really
fyi i was talking about modding the go4 app to remove the spying, login etc but also to remove the nfz color zones as the app will still display those even tho you can fly in them.
[2023-09-20 17:14:46]
oakley75 :
the 1.5.1 apk here is an official apk from the play store. the 1.5.10 is the latest you can use but it came from an apk mirror site. thats all really
fyi i was talking about modding the go4 app to remove the spying, login etc but also to remove the nfz color zones as the app will still display those even tho you can fly in them.
[2023-09-20 17:43:22]
kyokushin :
i have done this dji go app modding just after spark release and dji-rev started, around 2018/2019. I was curious similar thing was done for dji fly. i will try to recompile dji fly and play on this. In those years i switched to ios but it seems even on more modern birds i will need to stick on Android :)
[2023-09-20 17:43:22]
kyokushin :
i have done this dji go app modding just after spark release and dji-rev started, around 2018/2019. I was curious similar thing was done for dji fly. i will try to recompile dji fly and play on this.
[2023-09-20 17:47:43]
oakley75 :
the fly app issue is that no keys are public (that i know of) and cracking them is, well you know, realistically impossible
[2023-09-20 17:49:32]
oakley75 :
welcome back to the (mostly) OG playground friend
[2023-09-20 17:50:23]
oakley75 :
welcome back to the (mostly) OG playground friend
[2023-09-20 18:50:28]
felipemalet :
felipemalet joined the channel.
[2023-09-21 15:29:22]
fcwest :
fcwest joined the channel.
[2023-09-22 03:12:57]
madmikem16 :
madmikem16 joined the channel.
[2023-09-22 04:04:52]
xjfx2010 :
xjfx2010 joined the channel.
[2023-09-22 08:55:10]
lorebene99 :
Good morning, I am currently working with a Matrice 210 V1 and a Raspberry 4b with Ubuntu 18.0.4 as onboard computer, I was able to correctly setup the Raspberry pi 4 and to correctly connect it to the drone to run the sample code, now I have a question that is specific, I would like to access with the onboard computer the coordinate of the area that I'm going to call working area, which is defined on DJI pilot 2 when planning a new mission, do you think that this is possible? And if so do you know where I should look in the OSDK APIs?
[2023-09-22 08:55:10]
lorebene99 :
Good morning, I am currently working with a Matrice 210 V1 and a Raspberry 4b with Ubuntu 18.0.4 as onboard compuer, I was able to correctly setup the Raspberry pi 4 and to correctly connect it to the drone to run the sample code, now I have a question that is specific, I would like to access with the onboard computer the coordinate of the area that I'm going to call working area, which is defined on DJI pilot 2 when planning a new mission, do you think that this is possible? And if so do you know where I should look in the OSDK APIs?
[2023-09-22 14:29:41]
l712397853 :
l712397853 joined the channel.
[2023-09-22 15:11:57]
l712397853 :
@l712397853 left the channel.
[2023-09-24 15:57:00]
rleiro :
rleiro joined the channel.
[2023-09-24 16:54:23]
archer922922 :
archer922922 joined the channel.
[2023-09-25 15:04:04]
novaktritonphd2 :
novaktritonphd2 joined the channel.
[2023-09-26 09:48:54]
johnnybingbong :
johnnybingbong joined the channel.
[2023-09-26 11:30:44]
danangflycam :
danangflycam joined the channel.
[2023-09-26 18:21:51]
schait :
schait joined the channel.
[2023-09-27 01:33:13]
bmxjihad :
bmxjihad joined the channel.
[2023-09-27 03:41:47]
wills :
wills joined the channel.
[2023-09-27 20:57:36]
tssmaster :
tssmaster joined the channel.
[2023-09-27 21:24:14]
jodyhannan :
jodyhannan joined the channel.
[2023-09-27 21:34:31]
migueldp :
migueldp joined the channel.
[2023-09-28 10:20:08]
lsz007 :
lsz007 joined the channel.
[2023-09-28 13:16:01]
awei :
awei joined the channel.
[2023-09-28 18:43:06]
ronald :
ronald joined the channel.
[2023-09-29 22:08:58]
vscc :
vscc joined the channel.
[2023-09-30 07:33:37]
kronja :
kronja joined the channel.
[2023-09-30 07:46:36]
daxiid :
daxiid joined the channel.
[2023-09-30 07:58:42]
xoclutch :
xoclutch joined the channel.
[2023-09-30 13:59:09]
hossein :
hossein joined the channel.
[2023-09-30 18:24:21]
stefan :
stefan joined the channel.
[2023-10-01 08:51:59]
rogueelectron :
rogueelectron joined the channel.
[2023-10-02 14:40:59]
joonas :
joonas joined the channel.
[2023-10-02 14:42:33]
joonas :
joonas joined the channel.
[2023-10-02 18:52:29]
patrick_sperling :
patrick_sperling joined the channel.
[2023-10-02 22:07:01]
xxemlxx :
xxemlxx joined the channel.
[2023-10-03 06:00:31]
spc9999 :
spc9999 joined the channel.
[2023-10-06 14:55:56]
ppk :
ppk joined the channel.
[2023-10-07 02:48:52]
amzq :
amzq joined the channel.
[2023-10-07 07:17:25]
lhui :
lhui joined the channel.
[2023-10-07 09:35:12]
baoyin :
baoyin joined the channel.
[2023-10-07 20:01:26]
lacrimos :
lacrimos joined the channel.
[2023-10-08 07:57:31]
p33k4b00 :
p33k4b00 joined the channel.
[2023-10-08 10:32:47]
bence :
bence joined the channel.
[2023-10-08 11:07:02]
lebdds :
lebdds joined the channel.
[2023-10-09 12:49:22]
wisitchai :
wisitchai joined the channel.
[2023-10-10 16:45:37]
arthis :
arthis joined the channel.
[2023-10-11 19:25:21]
mouthhat :
mouthhat joined the channel.
[2023-10-13 06:50:23]
phamvanlam93 :
phamvanlam93 joined the channel.
[2023-10-13 07:52:47]
autoposting :
autoposting joined the channel.
[2023-10-13 11:04:45]
zile86 :
zile86 joined the channel.
[2023-10-13 11:53:32]
gemlu :
gemlu joined the channel.
[2023-10-13 17:58:57]
madkemyst :
madkemyst joined the channel.
[2023-10-14 00:22:31]
zendyhu :
zendyhu joined the channel.
[2023-10-14 08:19:34]
gigobait :
gigobait joined the channel.
[2023-10-14 09:40:24]
libra22 :
libra22 joined the channel.
[2023-10-14 20:15:46]
chipmonk1313 :
chipmonk1313 joined the channel.
[2023-10-15 20:40:02]
dumldore_newbi :
dumldore_newbi joined the channel.
[2023-10-15 22:42:19]
damian :
damian joined the channel.
[2023-10-17 11:41:23]
chy :
chy joined the channel.
[2023-10-19 07:12:04]
yujc1986 :
yujc1986 joined the channel.
[2023-10-19 12:35:39]
mifox09 :
mifox09 joined the channel.
[2023-10-19 14:57:44]
w3c :
w3c joined the channel.
[2023-10-19 22:37:10]
zhrd :
zhrd joined the channel.
[2023-10-20 03:29:30]
ntzwq :
ntzwq joined the channel.
[2023-10-20 08:50:48]
xbart :
xbart joined the channel.
[2023-10-20 09:38:34]
mercury :
mercury joined the channel.
[2023-10-21 17:06:14]
ysk :
ysk joined the channel.
[2023-10-22 01:58:16]
adyo-dji :
adyo-dji joined the channel.
[2023-10-22 21:09:46]
jcinfo :
jcinfo joined the channel.
[2023-10-23 00:56:46]
demonic :
demonic joined the channel.
[2023-10-24 10:41:16]
caseygibson :
caseygibson joined the channel.
[2023-10-25 04:40:30]
phant0m :
phant0m joined the channel.
[2023-10-25 22:12:08]
ricardo :
ricardo joined the channel.
[2023-10-27 18:45:47]
mgracio :
mgracio joined the channel.
[2023-10-27 19:54:56]
ildefonso :
ildefonso joined the channel.
[2023-10-29 10:56:20]
alex7593 :
alex7593 joined the channel.
[2023-10-30 08:06:27]
dustball :
dustball joined the channel.
[2023-10-30 10:28:54]
freqq :
freqq joined the channel.
[2023-10-30 18:47:21]
songyuchen :
songyuchen joined the channel.
[2023-10-31 05:48:08]
rajaerman :
rajaerman joined the channel.
[2023-10-31 17:42:42]
mpleight :
mpleight joined the channel.
[2023-11-01 19:53:28]
coertmans :
coertmans joined the channel.
[2023-11-02 04:39:04]
insuyun :
insuyun joined the channel.
[2023-11-02 13:16:26]
dhsacxz :
dhsacxz joined the channel.
[2023-11-02 22:42:38]
nutsey :
nutsey joined the channel.
[2023-11-03 00:54:51]
awilliams :
awilliams joined the channel.
[2023-11-03 02:08:54]
assgent :
assgent joined the channel.
[2023-11-05 17:23:30]
artik :
artik joined the channel.
[2023-11-05 18:15:45]
vfedoretc :
vfedoretc joined the channel.
[2023-11-06 14:33:59]
webxperia :
webxperia joined the channel.
[2023-11-07 11:27:24]
m4ndu :
m4ndu joined the channel.
[2023-11-07 18:10:18]
ethanmoore :
ethanmoore joined the channel.
[2023-11-08 09:36:53]
tom87 :
tom87 joined the channel.
[2023-11-08 19:48:46]
djmil :
djmil joined the channel.
[2023-11-09 09:56:34]
xiang :
xiang joined the channel.
[2023-11-10 03:08:32]
tomgs423 :
tomgs423 joined the channel.
[2023-11-10 04:04:13]
sevenbitowl :
sevenbitowl joined the channel.
[2023-11-10 05:23:57]
den :
den joined the channel.
[2023-11-11 03:47:21]
asuka_331 :
asuka_331 joined the channel.
[2023-11-11 04:42:35]
zkahv66 :
zkahv66 joined the channel.
[2023-11-11 08:56:47]
jiansheng :
jiansheng joined the channel.
[2023-11-12 15:35:48]
jester_j :
jester_j joined the channel.
[2023-11-12 19:24:18]
yurii :
yurii joined the channel.
[2023-11-13 21:07:51]
girkin :
girkin joined the channel.
[2023-11-13 22:02:06]
delavandaag :
delavandaag joined the channel.
[2023-11-14 08:06:57]
nighthawk :
nighthawk joined the channel.
[2023-11-14 19:39:29]
yurirodriguesap :
yurirodriguesap joined the channel.
[2023-11-15 18:19:21]
rotrmorlab :
rotrmorlab joined the channel.
[2023-11-16 05:17:31]
ott3r :
ott3r joined the channel.
[2023-11-16 21:53:08]
dep :
dep joined the channel.
[2023-11-18 05:12:43]
btd :
btd joined the channel.
[2023-11-19 18:45:41]
sferrini :
sferrini joined the channel.
[2023-11-19 19:28:18]
appel67 :
appel67 joined the channel.
[2023-11-20 10:25:29]
johan2000 :
johan2000 joined the channel.
[2023-11-20 14:33:59]
kirk22 :
kirk22 joined the channel.
[2023-11-20 18:11:22]
grayfox :
grayfox joined the channel.
[2023-11-21 06:27:07]
yongyilao :
yongyilao joined the channel.
[2023-11-21 08:14:01]
by35859684 :
by35859684 joined the channel.
[2023-11-22 09:55:48]
tnostvik :
tnostvik joined the channel.
[2023-11-22 18:18:44]
alejandrojfernandez :
alejandrojfernandez joined the channel.
[2023-11-23 06:06:32]
shap :
shap joined the channel.
[2023-11-23 16:44:10]
alforo :
alforo joined the channel.
[2023-11-26 12:36:51]
devinnorgarb :
devinnorgarb joined the channel.
[2023-11-26 22:05:47]
neirok :
neirok joined the channel.
[2023-11-27 23:15:56]
elmgard :
elmgard joined the channel.
[2023-11-28 09:38:38]
liaott89 :
liaott89 joined the channel.
[2023-11-28 09:42:51]
santosg :
santosg joined the channel.
[2023-11-29 07:26:29]
xiabo999 :
xiabo999 joined the channel.
[2023-12-01 05:29:21]
marshydro :
marshydro joined the channel.
[2023-12-02 10:17:34]
vladimir :
vladimir joined the channel.
[2023-12-02 15:42:52]
sinsinology :
sinsinology joined the channel.
[2023-12-03 03:35:32]
chtnj :
chtnj joined the channel.
[2023-12-04 01:14:18]
i2moisty :
i2moisty joined the channel.
[2023-12-04 01:18:13]
i2moisty :
Hey new here. Im looking at a auction site that has a DJI MINI 2 SE DRONE ACCOUNT Bound. Is there anyway to hack around this?
[2023-12-04 09:24:06]
haria :
haria joined the channel.
[2023-12-04 17:46:48]
ryantkasher :
ryantkasher joined the channel.
[2023-12-04 21:27:50]
pymonkey :
pymonkey joined the channel.
[2023-12-05 01:17:09]
sylar :
sylar joined the channel.
[2023-12-05 02:10:53]
larryhu :
larryhu joined the channel.
[2023-12-05 06:54:39]
qq134520 :
qq134520 joined the channel.
[2023-12-05 12:28:27]
stjian :
stjian joined the channel.
[2023-12-05 14:50:03]
wangying :
wangying joined the channel.
[2023-12-05 20:18:10]
mike.t :
mike.t joined the channel.
[2023-12-06 08:08:51]
platoon :
platoon joined the channel.
[2023-12-06 11:47:14]
dareehoral :
dareehoral joined the channel.
[2023-12-07 00:34:05]
seveneighto :
seveneighto joined the channel.
[2023-12-07 22:58:32]
animack :
animack joined the channel.
[2023-12-08 01:33:33]
vien :
vien joined the channel.
[2023-12-08 03:08:12]
zzrr0 :
zzrr0 joined the channel.
[2023-12-08 19:06:36]
dandiwch :
dandiwch joined the channel.
[2023-12-09 00:35:42]
ildefonso :
mini 3 pro
[2023-12-09 07:40:52]
ankur55 :
ankur55 joined the channel.
[2023-12-09 19:49:44]
monpiere :
monpiere joined the channel.
[2023-12-10 18:07:48]
fiko1968 :
fiko1968 joined the channel.
[2023-12-10 18:15:41]
zzzk :
zzzk joined the channel.
[2023-12-12 12:15:51]
dareehoral :
Hey everyone! I'm trying to modify FC parameters on Air 2s manually. I unsigned wm232_0801 file and got bin, but can't decrypt it with dji_mvfc_fwpak.py "Warning: CRC of the header doesn't match!". And also can't extract FC parameters out of it with dji_flyc_param_ed.py "Flight controller parameters array signature not detected in input file". I guess some parts of guide on retrorooms might be outdated. What are next steps after unsiging 0801 file?
[2023-12-12 12:15:51]
dareehoral :
Hey everyone! I'm trying to modify FC parameters on Air 2s manually. I unsigned wm232_0801 file and got bin, but can't decrypt it with dji_mvfc_fwpak.py "Warning: CRC of the header doesn't match!". And also can't extract FC parameters out of it with dji_flyc_param_ed.py "Flight controller parameters array signature not detected in input file". I guess some parts of guide on retroroms might be outdated. What are next steps after unsiging 0801 file?
[2023-12-12 12:15:51]
dareehoral :
Hey everyone! I'm trying to modify FC parameters on Air 2s manually. I unsigned wm232_0801 file and got bin, but can't decrypt it with dji_mvfc_fwpak.py "Warning: CRC of the header doesn't match!". And also can't extract FC parameters out of it with dji_flyc_param_ed.py "Flight controller parameters array signature not detected in input file". I guess some parts of guide on retrorooms might be outdated. What are next steps after unsignind 0801 file?
[2023-12-12 13:54:38]
tmbinc :
You can't flash a changed flight controller. FC firmware for Air 2s is in bootarea, there's a few IM*H images, the last one is FC. I think the TBIE key should be public by now?
[2023-12-12 15:15:23]
dareehoral :
Thank you for the answer!
[2023-12-12 15:16:02]
dareehoral :
I'll try messing with bootarea
[2023-12-13 03:05:42]
junior :
junior joined the channel.
[2023-12-13 10:54:57]
notdan :
notdan joined the channel.
[2023-12-13 12:04:26]
felix :
felix joined the channel.
[2023-12-13 12:54:55]
boabdil1492 :
boabdil1492 joined the channel.
[2023-12-13 14:13:16]
basilius :
basilius joined the channel.
[2023-12-13 14:20:24]
leo62 :
leo62 joined the channel.
[2023-12-13 14:54:46]
f0w :
f0w joined the channel.
[2023-12-14 01:16:39]
aryabp :
aryabp joined the channel.
[2023-12-14 01:48:30]
jackwu01777 :
jackwu01777 joined the channel.
[2023-12-14 02:19:29]
aesculap50 :
aesculap50 joined the channel.
[2023-12-14 14:36:55]
yphinto :
yphinto joined the channel.
[2023-12-14 17:43:31]
hugi :
hugi joined the channel.
[2023-12-15 10:41:54]
caines1989 :
caines1989 joined the channel.
[2023-12-15 13:32:40]
basilius :
Hey guys, does anyone know what version of the TBIE key is needed to decrypt the mavic air2 S? Firmware version 2.04.2040
[2023-12-16 10:32:38]
nonefx :
nonefx joined the channel.
[2023-12-18 03:35:51]
pot :
pot joined the channel.
[2023-12-18 04:15:09]
phishfan120 :
phishfan120 joined the channel.
[2023-12-18 05:20:02]
maxfunky :
maxfunky joined the channel.
[2023-12-18 16:25:18]
f0w :
f0w joined the channel.
[2023-12-18 23:17:31]
nata.sjc :
nata.sjc joined the channel.
[2023-12-19 05:56:17]
zexgx :
zexgx joined the channel.
[2023-12-20 01:28:20]
bogdando2 :
bogdando2 joined the channel.
[2023-12-20 02:23:15]
nitro23 :
nitro23 joined the channel.
[2023-12-20 05:30:07]
mailiex :
mailiex joined the channel.
[2023-12-20 14:44:01]
h.wurst :
h.wurst joined the channel.
[2023-12-20 15:34:18]
finges :
finges joined the channel.
[2023-12-20 22:37:07]
dji-noob :
dji-noob joined the channel.
[2023-12-21 12:28:14]
moyivo8659 :
moyivo8659 joined the channel.
[2023-12-21 13:52:52]
maddie_thedrone :
maddie_thedrone joined the channel.
[2023-12-21 14:31:01]
basilius :
Have a nice day everyone, trying to sniff RX and TX on Mavic Air 2s. serial2pcap asks for 2 ports. How can I mechanically implement the connection to the drone, and is it possible to do this via USB?
[2023-12-21 22:30:03]
yt4gg3r :
yt4gg3r joined the channel.
[2023-12-21 23:16:22]
alexiinter1964 :
alexiinter1964 joined the channel.
[2023-12-22 13:08:07]
chjen :
chjen joined the channel.
[2023-12-22 14:11:01]
valivalivalivali :
valivalivalivali joined the channel.
[2023-12-22 19:54:04]
superfokeryou :
superfokeryou joined the channel.
[2023-12-23 05:37:54]
mehr :
mehr joined the channel.
[2023-12-27 08:47:58]
latex :
latex joined the channel.
[2023-12-27 11:56:35]
ls593037579 :
ls593037579 joined the channel.
[2023-12-28 05:12:01]
h-pc31 :
h-pc31 joined the channel.
[2023-12-29 09:17:58]
generallyunintelligent :
generallyunintelligent joined the channel.
[2023-12-29 13:30:10]
boabdil :
boabdil joined the channel.
[2023-12-29 13:45:01]
pep :
pep joined the channel.
[2023-12-29 14:18:52]
jeeenna :
jeeenna joined the channel.
[2023-12-29 17:12:11]
mahesh.mahara :
mahesh.mahara joined the channel.
[2023-12-30 01:29:02]
south :
south joined the channel.
[2023-12-30 18:00:51]
comfychair :
comfychair joined the channel.
[2023-12-31 00:38:30]
generallyunintelligent :
hi all. I am a newbie. Did I mess up by binding and activating?
[2023-12-31 14:15:11]
cs2000 :
No, you need to do that anyway as we cannot bypass activation :)
[2023-12-31 17:54:04]
jiajia59425 :
jiajia59425 joined the channel.
[2023-12-31 18:44:43]
djtaz :
djtaz joined the channel.
[2023-12-31 19:01:17]
yoko :
yoko joined the channel.
[2023-12-31 21:15:02]
hightymes :
hightymes joined the channel.
[2024-01-01 12:35:43]
killeratlarge :
killeratlarge joined the channel.
[2024-01-01 14:21:00]
jiajia59425 :
[support.nolimitdronez.com](https://support.nolimitdronez.com/)
[2024-01-01 14:21:26]
jiajia59425 :
Hello everyone, I just followed you. I have dismantled the Wu 2 and just want to use the image transmission system and gimbal. This has been completed. I want to modify the internal parameters of Inspire 2 to operate the gimbal with a single remote control and dual authorization. Can this be achieved by modifying parameters? If so, how can I set the parameters?
[2024-01-01 14:23:23]
jiajia59425 :
Hello, I just followed you. I have disassembled INSPIRE 2, I just want to use the map system and Yuntai, which has been completed. I want to modify the internal parameters of INSPIRE 2 to use a single remote control to operate gimbal and dual authorization. Can this be implemented by modifying parameters? How can I set parameters?
[2024-01-01 19:58:56]
prist :
prist joined the channel.
[2024-01-02 00:17:04]
pdillie25 :
pdillie25 joined the channel.
[2024-01-04 09:41:36]
ondramarkow :
ondramarkow joined the channel.
[2024-01-05 03:28:34]
jony787 :
jony787 joined the channel.
[2024-01-06 10:09:41]
obamacareme :
obamacareme joined the channel.
[2024-01-06 16:01:13]
shikijo :
shikijo joined the channel.
[2024-01-06 16:08:58]
rcmonsteru :
rcmonsteru joined the channel.
[2024-01-06 16:41:15]
kap1r0t0 :
kap1r0t0 joined the channel.
[2024-01-07 03:08:27]
zxl :
zxl joined the channel.
[2024-01-07 12:20:25]
doodle :
doodle joined the channel.
[2024-01-07 13:02:36]
dumldore_newbi :
Hi, I'm currently learning about DroneID. I was wondering if there are any informations about updates to DroneID since the code and reaserch about decoding came up? I wasn't able to find anything from the official site but read about encryption that should get implemented.
[2024-01-07 15:46:24]
mykolademchenko :
mykolademchenko joined the channel.
[2024-01-07 16:04:17]
tobelf :
tobelf joined the channel.
[2024-01-07 16:10:19]
dekram :
dekram joined the channel.
[2024-01-08 13:55:16]
zjm605186980 :
zjm605186980 joined the channel.
[2024-01-08 20:46:41]
silentreaper :
silentreaper joined the channel.
[2024-01-09 04:55:32]
krecik400 :
krecik400 joined the channel.
[2024-01-09 05:38:22]
kevinestija :
kevinestija joined the channel.
[2024-01-10 14:46:12]
yellow :
yellow joined the channel.
[2024-01-11 11:19:44]
xuzhi0222 :
xuzhi0222 joined the channel.
[2024-01-11 15:00:02]
tonyrio :
tonyrio joined the channel.
[2024-01-12 21:03:13]
calvin-dji :
andrey1995 joined the channel.
[2024-01-12 22:15:59]
raffaeleorlan :
raffaeleorlan joined the channel.
[2024-01-13 12:38:54]
balb0x :
balb0x joined the channel.
[2024-01-13 13:59:16]
mahdibordo :
mahdibordo joined the channel.
[2024-01-14 13:09:56]
zjm605186980 :
Hello everyone, I am a newcomer. How can I change the battery password for the latest firmware of Mavic3?
[2024-01-14 16:52:05]
bh5hwc :
bh5hwc joined the channel.
[2024-01-15 00:03:48]
gordovolador :
gordovolador joined the channel.
[2024-01-15 07:36:15]
flylusive_pat :
You cannot.
[2024-01-15 10:01:00]
bogdsan :
bogdsan joined the channel.
[2024-01-15 11:57:45]
honorqsw721 :
honorqsw721 joined the channel.
[2024-01-15 13:36:25]
asbrings :
asbrings joined the channel.
[2024-01-15 13:50:42]
zjm605186980 :
Hello everyone, I am a newcomer. How can I change the battery password for the latest firmware of Mavic3?
[2024-01-15 13:51:52]
zjm605186980 :
Is there any good way?
[2024-01-15 17:43:11]
flylusive_pat :
no
[2024-01-16 22:38:50]
drone_paki :
drone_paki joined the channel.
[2024-01-17 07:39:33]
knorz :
knorz joined the channel.
[2024-01-17 14:32:33]
hb03duaaku :
hb03duaaku joined the channel.
[2024-01-17 17:14:20]
narkomasik :
narkomasik joined the channel.
[2024-01-18 01:08:30]
enk2022 :
@enk2022 left the channel.
[2024-01-18 09:08:11]
slickstretch :
slickstretch joined the channel.
[2024-01-20 01:33:22]
shminer :
shminer joined the channel.
[2024-01-20 16:02:41]
neuralz :
neuralz joined the channel.
[2024-01-21 16:42:35]
kyokushin :
!apk
[2024-01-21 16:42:35]
dji-rev-bot :
Due to security in modern browsers, you may need to Right Click and select 'Save Link As' to download these APK's
**DJI Fly 1.5.10:**
http://dji-rev.com:8080/APK/DJI_Fly-v1.5.10.apk
**DJI Fly 1.5.1:**
http://dji-rev.com:8080/APK/DJI_Fly-v1.5.1.apk
**Go4 4.1.22:**
http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.22_NoSecNeo.apk
**Go4 4.1.14:**
http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.14_NoSecNeo.apk
**Go4 4.1.15:**
http://dji-rev.com:8080/APK/DJI_Go_v4%204.1.15_NoSecNeo.apk
**Go3:**
http://dji-rev.com:8080/APK/Go3-nosecneo.apk
**Litchi 4.25:**
http://dji-rev.com:8080/APK/Litchi_4.25.apk
[2024-01-22 01:47:31]
pysio :
pysio joined the channel.
[2024-01-22 08:27:37]
popeion :
popeion joined the channel.
[2024-01-22 08:34:17]
leviathan :
bajadax928 joined the channel.
[2024-01-22 19:53:13]
muctuk5 :
muctuk5 joined the channel.
[2024-01-23 01:18:16]
areoc :
Downgrade the battery firmware, you can use the old password
[2024-01-23 12:01:53]
s1m0n :
BMS FW 1100 is with old Passwort, BMS FW 1200 is with new Password
[2024-01-23 17:05:41]
vincent88 :
vincent88 joined the channel.
[2024-01-23 17:46:35]
flylusive_pat :
@s1m0n On new FW it's password + auth challenge
[2024-01-23 20:03:32]
p024409 :
p024409 joined the channel.
[2024-01-23 20:17:51]
s1m0n :
I dont know, what U mean by "+ Auth",but U can easy flash old BMS fw, over new BMS fw
[2024-01-24 05:14:22]
joyz :
joyz joined the channel.
[2024-01-24 20:10:46]
davidsas :
davidsas joined the channel.
[2024-01-25 22:37:40]
jackjia :
jackjia joined the channel.
[2024-01-26 04:11:03]
gaoding :
gaoding joined the channel.
[2024-01-26 17:21:41]
xquatz :
xquatz joined the channel.
[2024-01-27 15:49:10]
dbns :
dbns joined the channel.
[2024-01-27 15:52:55]
dbns :
heya, i recently purchased a m2p without a rc. stupidly, i later purchased a mp remote (GL200A) not knowing it would not work with the m2p. any chance that i could flash firmware from the rc1a to the gl200a? the internal hardware looks pretty much identical between the two (fcc documents [gl200a](https://fcc.report/FCC-ID/SS3-GL200A1606/3146197.pdf) and [rc1a](https://fccid.io/SS3-RC1A1805/Internal-Photos/Internal-Photos-3974453.pdf)). the only real difference would be ocusync version, but is that not just software? i read that the mp/m2p rc:s use off the shelf wifi hardware and then ocusync is handled in software. any help appreciated :)
[2024-01-27 15:52:55]
dbns :
heya, i recently purchased a m2p without a rc. stupidly, i later purchased a mp remote (GL200A) not knowing it would not work with the m2p. any chance that i could flash firmware from the rc1a to the gl200a? the internal hardware looks pretty much identical between the two (fcc documents [gl200a](https://fcc.report/FCC-ID/SS3-GL200A1606/3146197.pdf) and [rc1a](https://fccid.io/SS3-RC1A1805/Internal-Photos/Internal-Photos-3974453.pdf)). the only real difference would be ocusync version, but is that not just software? i read that the mp/m2p rc:s use off the shelf wifi hardware and then ocusync is handled in software. any help appreciated :]
[2024-01-27 15:52:55]
dbns :
heya, i recently purchased a m2p without a rc. stupidly, i later purchased a mp remote (GL200A) not knowing it would not work with the m2p. any chance that i could flash firmware from the rc1a to the gl200a? the internal hardware looks pretty much identical between the two (fcc documents [gl200a](https://fcc.report/FCC-ID/SS3-GL200A1606/3146197.pdf) and [rc1a](https://fccid.io/SS3-RC1A1805/Internal-Photos/Internal-Photos-3974453.pdf)). the only real difference would be ocusync version, but is that not just software? i read that the mp/m2p rc:s use off the shelf wifi hardware and then ocusync is handled in software. any help appreciated \:)
[2024-01-27 18:11:05]
dbns :
from the fw dumps and reverse engineering i have seen the rcs run android or at least linux, so maybe one could simply move the "identifying" binaries over and trick the ac to thinking it is connected to a rc1a?, the problem is the trustzone stuff
[2024-01-27 18:37:26]
stoeto :
stoeto joined the channel.
[2024-01-27 18:57:32]
xicac39251 :
xicac39251 joined the channel.
[2024-01-27 20:52:08]
dbns :
ok so progress, i extracted two firmware files for the two controllers using https://github.com/o-gs/dji-firmware-tools and did a by file diff of the rootfses, the binaries are pretty much the exact same only differing in the name of the device. dji.json was interesting too:
`diff
diff --color -r rc220/system/etc/dji.json rc240/system/etc/dji.json
16,17c16,17
< "dev_info": "WM220 1860RC",
< "hw_str": "WM220 RC"
---
> "dev_info": "WM240 1860RC",
> "hw_str": "WM240 RC"
`
and
`diff
> "21": {"status": 0, "target": "ve_air", "index": 1, "channel": "wl", "distance": 0, "protocol": "v1",
> "wl": {"interface": "iwlan0", "local_port": 0, "remote_address": "192.168.41.1", "remote_port": 10002, "server": false, "protocol": "udp"}},
284,285c290,297
< "44": {"status": 1, "target": "camera", "index": 1, "channel": "wl", "distance": 0, "protocol": "v1",
< "wl": {"interface": "iwlan0", "local_port": 0, "remote_address": "192.168.41.1", "remote_port": 22352, "server": false, "protocol": "tcp"}}
`
[2024-01-27 20:52:08]
dbns :
ok so progress, i extracted two firmware files for the two controllers using [dji-firmware-tools](https://github.com/o-gs/dji-firmware-tools) and did a by file diff of the rootfses, the binaries are pretty much the exact same only differing in the name of the device. dji.json was interesting too:
```diff
diff --color -r rc220/system/etc/dji.json rc240/system/etc/dji.json
16,17c16,17
< "dev_info": "WM220 1860RC",
< "hw_str": "WM220 RC"
---
> "dev_info": "WM240 1860RC",
> "hw_str": "WM240 RC"
```
and
```diff
> "21": {"status": 0, "target": "ve_air", "index": 1, "channel": "wl", "distance": 0, "protocol": "v1",
> "wl": {"interface": "iwlan0", "local_port": 0, "remote_address": "192.168.41.1", "remote_port": 10002, "server": false, "protocol": "udp"}},
284,285c290,297
< "44": {"status": 1, "target": "camera", "index": 1, "channel": "wl", "distance": 0, "protocol": "v1",
< "wl": {"interface": "iwlan0", "local_port": 0, "remote_address": "192.168.41.1", "remote_port": 22352, "server": false, "protocol": "tcp"}}
```
[2024-01-27 20:52:08]
dbns :
ok so progress, i extracted two firmware files for the two controllers using https://github.com/o-gs/dji-firmware-tools and did a by file diff of the rootfses, the binaries are pretty much the exact same only differing in the name of the device. dji.json was interesting too:
```diff
diff --color -r rc220/system/etc/dji.json rc240/system/etc/dji.json
16,17c16,17
< "dev_info": "WM220 1860RC",
< "hw_str": "WM220 RC"
---
> "dev_info": "WM240 1860RC",
> "hw_str": "WM240 RC"
```
and
```diff
> "21": {"status": 0, "target": "ve_air", "index": 1, "channel": "wl", "distance": 0, "protocol": "v1",
> "wl": {"interface": "iwlan0", "local_port": 0, "remote_address": "192.168.41.1", "remote_port": 10002, "server": false, "protocol": "udp"}},
284,285c290,297
< "44": {"status": 1, "target": "camera", "index": 1, "channel": "wl", "distance": 0, "protocol": "v1",
< "wl": {"interface": "iwlan0", "local_port": 0, "remote_address": "192.168.41.1", "remote_port": 22352, "server": false, "protocol": "tcp"}}
```
[2024-01-27 20:55:58]
dbns :
very few differences overall which makes me wonder has anyone ever tried flashing rc1a fw on a gl200a? just for giggles :stuck_out_tongue:
[2024-01-27 21:24:51]
dbns :
ah just realized after reading through the fcc details gl200a does not have 5.8ghz transciever? or at least those frequency bands are not listed in the "operating frequencies" section :confused:
[2024-01-27 21:29:16]
dbns :
that should not matter all that much though, just need to set it to 2.4ghz mode all the time, another worrying hw difference is the TPS switch on the side, on the gl200a it is just a simple sport mode switch, so no tripod mode from the remote :confused: could also be a royal pita to fix in fw
[2024-01-27 21:29:16]
dbns :
that should not matter all that much though, just need to set it to 2.4ghz mode all the time, another worrying hw difference is the TPS switch on the side, on the gl200a it is just a simple sport mode switch, so no tripod mode from the remote :confused:
[2024-01-28 07:05:54]
tmbinc :
The real differences are on the modemarm side, but if you can flash that, it may even work.
[2024-01-28 09:27:36]
stoeto :
I really need help whith DJI Mavic pro is possible to use DJI APK and don't be detected by the company
[2024-01-28 09:30:49]
stoeto :
And also I need to change GPS module or is different way
[2024-01-28 11:53:24]
leviathan :
Hello, everyone!
I'm currently trying to figure out how to properly modify the DJI Mini 2 drone firmware for my university's research. I stumbled upon [this](https://www.diva-portal.org/smash/get/diva2:1607790/FULLTEXT01.pdf) paper which describes that it's possible to extract the entire Linux directory structure from the binary file (section 5.2) using the dji-firmware-tools and then analyze the code base that controls the drone's behavior.
So I got the firmware file, used Binwalk to extract the sig files from it and then used the **dji_imah_fwsig.py** script with PRAK-2019-09 key to unsign and decrypt the firmware. But I'm not sure what to do next as I'm only getting into this field of study.
The paper mentioned your community so I figured I'd ask for help here.
Can anyone in any way direct me towards resolving this issue? May be some helpful articled or advises? Thanks.
[2024-01-28 12:17:24]
dbns :
unsigning it should leave you with a few files for each module, if you want the rootfs which i am assuming, just look for the largest file and binwalk, if it says it is a zip then just unzip it but it is most likely the case that it is encrypted, i used ```dji_mvfc_fwpak.py dec -i <FILENAME>``` to decrypt the bin and then it appeared as zip in binwalk and i could extract it like a regular zip file using unzip.
[2024-01-28 12:50:01]
leviathan :
Thank you for you reply!
Yes, I'm indeed trying to get the rootfs. After I unsigned the files with `dji_imah_fwsig.py`, I found the largest file that weights 38.9 MB and tried to use `binwalk --dd='.*' <file>.bin` on it and it didn't find any files inside the binary. After that I used the `dji_mvfc_fwpak.py` to remove the encryption, but I got an error from it.
`wm161_0100_v01.43.00.74_20230329.pro.fw_0100.bin: Opening for decryption
Target: 0504
Version: v59.41.178.223
Time: 2072-05-09 12:08:04
Size: 5994961
Data MD5: b'fccc590be707f0620c789482ebaa76f7'
Header CRC: b8b6
Error: CRC of the header doesn't match!`
I also tried using `dji_mvfc_fwpak.py` with `--force-continue` option which gave me out a file that weights 6 MB in which binwalk also didn't find any zips.
Am I doing something wrong here?
[2024-01-28 13:32:21]
carmix :
carmix joined the channel.
[2024-01-28 14:08:19]
dbns :
hmm i think i got that yesterday at some point and i think i just chose another prak at the imah stage and tried again
[2024-01-28 14:47:29]
leviathan :
I tried using all of these keys on the sig file that I extracted from the firmware bin file (with binwalk):
`['PRAK-2017-01', 'PRAK-2017-08', 'PRAK-2017-12', 'PRAK-2018-01', 'PRAK-2019-09', 'PRAK-2020-01']`
And all of them gave me no result files and an error:
`Warning: Image file head signature verification caused cryptographic exception: Incorrect signature
Error: Image file head signature verification failed.`
Except for the `PRAK-2019-09` key which gave me 2 ini files and 1 bin file with an error:
`Error: Decrypted chunks checksum verification failed.`
This bin file is the one that I have already tried extracting files from.
Do you remember the version of the firmware (was it Mini 2?) and the key that you used for unsigning the sig file?
[2024-01-28 14:57:53]
dbns :
no i was not working on the mini 2, so maybe things are different. i was working on mp rc.
[2024-01-28 16:24:17]
dbns :
Do you know what sets them apart?
[2024-01-28 16:27:39]
dbns :
If anyone has a rc1a with root shell access i would much appreciate a dump of /data/dji or the full emmc
[2024-01-28 17:40:27]
koolconcept :
koolconcept joined the channel.
[2024-01-29 08:48:42]
leviathan :
Hi!
I tried several other DJI drones firmwares and I keep getting the same error on them. Could you please clarify these steps for extracting the rootfs so I know if I'm doing something wrong?
1. `binwalk -e firmware-file.bin`;
2. Find the largest sig file;
3. `./code/dji_imah_fwsig.py -v -u -k PRAK-2019-09 -i largest-file.sig` which will give me unsigned.bin;
4. `./code/dji_mvfc_fwpak.py dec -i unsigned.bin`;
5. `binwalk -e decrypted.bin`.
Or if you have any other ideas on what can be done here, I would really appreciate it.
Thanks.
[2024-01-29 09:12:18]
s1m0n :
Open Firmware-file with 7z/Winrar. Copy the Image u want .. repeat Ur steps with correct keys
[2024-01-29 09:35:20]
dbns :
the decrypted fw is just a zip file like s1m0n said
[2024-01-29 10:04:06]
dbns :
found modemarm.pro.fw and decrypted with imah, lots of fun strings in there :) found some references to lmi modules and USIM? wonder if all mp:s have built in lte support... also sdr chip is most likely ceva-xc4210 or similar based on findings in the firmware
[2024-01-29 10:15:18]
dbns :
ghidra doesnt like modemarm though, cant seem to find architecture and if i use armv7 (xc4210 has arm-r8 cpu i think) i get a lot of "bad instruction"
[2024-01-29 15:23:32]
carmix :
@tmbinc on the mini 2 did anyone managed to decrypt the flight controller firmware(0306)? It seems to me that it has two levels of encryption, am I right?
[2024-01-29 15:29:50]
tmbinc :
correct, it uses the BEE (bus encryption engine), and I wasn't able to extract the key itself. Only to use a mini2 to decrypt FW.
[2024-01-29 18:50:37]
vovka55 :
vovka55 joined the channel.
[2024-01-29 20:55:03]
lining-preps.0u :
lining-preps.0u joined the channel.
[2024-01-30 01:13:34]
g0dp0t :
g0dp0t joined the channel.
[2024-01-30 06:44:12]
drone_fancy :
drone_fancy joined the channel.
[2024-01-30 08:30:00]
carmix :
Ok, in the last phrase you mean that it is possible to decrypt flight controller firmware dynamically if for example you have root access to the adb shell on mini2 (even if in that case we would be running that shell on the ambarella)?
[2024-01-30 12:09:19]
tmbinc :
Root shell on linux doesn't help, you need code exec on FC
[2024-01-30 16:24:35]
djidji :
djidji joined the channel.
[2024-01-30 16:32:36]
djidji :
Hello, is it possible at all to unlock a Dji Osmo Action cam? Or no way to do it?
[2024-01-30 22:28:20]
carmix :
Ok, I imagine through the duml protocol, is there any known command that allows the FC memory readout?
[2024-01-31 11:29:55]
joonas :
this should answer most of your questions re mini 2: https://www.youtube.com/watch?v=LnXVXEq-Rzc
[2024-01-31 11:31:02]
joonas :
there's a bit of general introduction at the beginning, but it gets into all the details you're asking about later.
[2024-02-01 21:13:48]
carmix :
Thank you, it is really impressive! @tmbinc congrats for your work!
[2024-02-02 05:27:43]
carmix :
@tmbinc looking at your work, an interesting part is that of ocusync transmissions, I understand that droneid is plain and readable with the correct receiver by anyone. But I'm wondering what about the Uplink part? Is it possible to extract some sensitive data even from that, like for example the serial ? I tweaked with code found on github and I demodulated an uplink packet obtaining a constellation that I paste here. As you can see there is a first part that is QPSK and a second that is QAM16. Do you have an idea why there is such a configuration? It seems like a first part could be of some header and the second contains data, do you have any idea?
[2024-02-02 05:27:43]
carmix :
@tmbinc looking at your work, an interesting part is that of ocusync transmissions, I understand that droneid is plain and readable with the correct receiver by anyone. But I'm wondering what about the Uplink part? Is it possible to extract some sensitive data even from that, like for example the serial ? I tweaked with code on github and I demodulated an uplink packet obtaining a constellation that I paste here. As you can see there is a first part that is QPSK and a second that is QAM16. Do you have an idea why there is such a configuration? It seems like a first part could be of some header and the second contains data, do you have any idea?
[2024-02-03 13:15:26]
wayrr :
wayrr joined the channel.
[2024-02-03 22:27:51]
abcnorth :
abcnorth joined the channel.
[2024-02-03 23:07:58]
okstuv :
okstuv joined the channel.
[2024-02-05 00:17:57]
otacon069 :
otacon069 joined the channel.
[2024-02-06 13:12:21]
xpk :
xpk joined the channel.
[2024-02-07 05:42:46]
taotaobuzhaji :
taotaobuzhaji joined the channel.
[2024-02-07 05:49:24]
taotaobuzhaji :
inspire
[2024-02-08 08:36:43]
rudrasama :
Anyone found any solution to fix "Vision sensor error" in Mavic 3 and Air 3 after Sensor replacements?
[2024-02-08 12:25:46]
am5991 :
am5991 joined the channel.
[2024-02-08 17:29:19]
flylusive_pat :
Are you in EU?
[2024-02-08 17:29:22]
flylusive_pat :
We could service it.
[2024-02-08 19:11:40]
irishdunnagan :
irishdunnagan joined the channel.
[2024-02-08 19:36:36]
mdh :
mdh joined the channel.
[2024-02-09 11:33:20]
astronoot :
astronoot joined the channel.
[2024-02-09 13:33:16]
rudrasama :
I am from India. Can you do it remotely?
[2024-02-09 20:56:52]
flylusive_pat :
Sorry, no.
[2024-02-10 16:26:10]
otter :
otter joined the channel.
[2024-02-10 18:20:15]
serjio :
serjio joined the channel.
[2024-02-11 11:40:55]
zyeein :
zyeein joined the channel.
[2024-02-12 03:42:18]
dart450r :
dart450r joined the channel.
[2024-02-12 16:59:36]
flymymavic :
Hey guy anyone got a fix for error 10061
[2024-02-12 16:59:36]
flymymavic :
Hey guys i need some help with the comm_og_service_tool.py, i can use it to run the jointcourse and linear hall for calibrating gimbals but there is another section of the comm_og_service_tool.py that i want to run on a quad but i cant figure out what the command line would be to run it
[2024-02-13 05:21:21]
carmix :
With ghidra I have no problem opening modemarm.fw. It is a cortex little endian. The Ceva DSP is on the other firmware, modemdsp. That one is really different, I think is not arm. I also tried other architectures with ida pro but nothing decoded it
[2024-02-13 08:48:39]
amiraqaie1376 :
amiraqaie1376 joined the channel.
[2024-02-13 16:59:29]
zevel102 :
zevel102 joined the channel.
[2024-02-13 17:07:25]
skynettech :
skynettech joined the channel.
[2024-02-13 19:05:01]
gugaazc :
gugaazc joined the channel.
[2024-02-13 19:50:42]
rudrasama :
Can we sniff packets in Dji Air 3? And yes, then how? I want to learn this. (Btw I am pursuing CS degree and I want to learn this stuff)
[2024-02-14 11:24:55]
huang :
huang joined the channel.
[2024-02-14 11:29:59]
huang :
字数：13
How to open FCC on Mavic 2
[2024-02-15 11:31:10]
rebebloy :
rebebloy joined the channel.
[2024-02-15 11:41:43]
danny :
danny joined the channel.
[2024-02-15 13:42:47]
roy_cn :
roy_cn joined the channel.
[2024-02-15 16:39:20]
caliwhiteknight :
caliwhiteknight joined the channel.
[2024-02-15 19:51:58]
johnibhramin :
johnibhramin joined the channel.
[2024-02-16 15:16:58]
robbe7730 :
robbe7730 joined the channel.
[2024-02-16 15:30:33]
qq4534102 :
qq4534102 joined the channel.
[2024-02-17 07:38:14]
tamkigta :
tamkigta joined the channel.
[2024-02-17 23:32:43]
carlosrubio :
carlosrubio joined the channel.
[2024-02-19 06:25:00]
vindia :
vindia joined the channel.
[2024-02-19 13:46:15]
ddoss :
ddoss joined the channel.
[2024-02-19 18:01:38]
leovinci81 :
leovinci81 joined the channel.
[2024-02-19 21:46:49]
crrx1 :
crrx1 joined the channel.
[2024-02-20 05:26:36]
bellirofont :
bellirofont joined the channel.
[2024-02-20 08:18:05]
weristdas :
weristdas joined the channel.
[2024-02-20 15:50:15]
jonathanselis :
jonathanselis joined the channel.
[2024-02-20 17:54:02]
n86 :
n86 joined the channel.
[2024-02-21 07:34:22]
l712397853 :
l712397853 joined the channel.
[2024-02-21 09:33:18]
frutenra :
frutenra joined the channel.
[2024-02-22 07:24:50]
wsq221 :
wsq221 joined the channel.
[2024-02-22 20:12:31]
rudrasama :
@ doesn anyone know the FTP username and password for Dji Air2s/Mini3/Mini4/Air3??
[2024-02-23 22:42:32]
cupko :
cupko joined the channel.
[2024-02-24 08:24:57]
null203 :
null203 joined the channel.
[2024-02-24 10:35:03]
abyssrium :
abyssrium joined the channel.
[2024-02-24 11:20:49]
fgzdf :
fgzdf joined the channel.
[2024-02-24 21:22:42]
jice66 :
jice66 joined the channel.
[2024-02-27 18:53:30]
markzhang6200 :
markzhang6200 joined the channel.
[2024-02-28 13:33:17]
gizmo :
gizmo joined the channel.
[2024-03-01 13:18:14]
johnsmotors :
johnsmotors joined the channel.
[2024-03-01 16:30:23]
hzyuze :
hzyuze joined the channel.
[2024-03-01 18:08:36]
joonas :
playing around with an inspire 1 raw. the wiki says one can enable FCC mode by connecting to the RC via USB and sending a few duml commands, but gl658c only has a USB A port?
[2024-03-03 15:38:52]
nergleson :
nergleson joined the channel.
[2024-03-03 18:33:05]
klarensky :
klarensky joined the channel.
[2024-03-04 18:09:03]
klarensky :
Hi. Are there other ways to flash .bin firmware of Mini 3 DH app doesnt support dji mini 3 yet
[2024-03-05 04:54:45]
shinoby :
I can do it
[2024-03-05 12:30:28]
fenerx03 :
fenerx03 joined the channel.
[2024-03-06 05:47:00]
ezra90 :
ezra90 joined the channel.
[2024-03-06 06:53:01]
a1587662 :
a1587662 joined the channel.
[2024-03-06 17:02:06]
cyc0916 :
cyc0916 joined the channel.
[2024-03-07 02:51:14]
dddanmar :
dddanmar joined the channel.
[2024-03-07 18:34:58]
lakis1982 :
lakis1982 joined the channel.
[2024-03-08 05:30:59]
djihacker :
djihacker joined the channel.
[2024-03-09 10:38:25]
svbfud :
svbfud joined the channel.
[2024-03-10 07:22:06]
jak :
jak joined the channel.
[2024-03-10 14:17:35]
robert :
robert joined the channel.
[2024-03-10 14:34:09]
nat :
nat joined the channel.
[2024-03-10 14:34:35]
nat :
nat joined the channel.
[2024-03-11 01:56:10]
jlf :
jlf joined the channel.
[2024-03-11 02:28:49]
kakaho :
kakaho joined the channel.
[2024-03-11 16:52:11]
yary1 :
yary1 joined the channel.
[2024-03-11 18:38:45]
kekzet :
kekzet joined the channel.
[2024-03-11 20:33:18]
eypsndr :
eypsndr joined the channel.
[2024-03-12 09:50:36]
sdfg4711 :
sdfg4711 joined the channel.
[2024-03-13 01:43:44]
booj4h :
booj4h joined the channel.
[2024-03-13 14:01:00]
ywf0720 :
ywf0720 joined the channel.
[2024-03-14 12:15:22]
lamleferta :
lamleferta joined the channel.
[2024-03-14 15:00:15]
koulak :
koulak joined the channel.
[2024-03-14 23:45:00]
razorfin :
razorfin joined the channel.
[2024-03-15 00:59:47]
propz :
propz joined the channel.
[2024-03-15 04:46:32]
propz :
Does the Mini 2 on the latest firmware have that bug where aeroscope still broadcasts randomly when it's disabled with "comm_serialtalk.py dev/ttyACM0 -a 2 -t 1000 -r 0300 -s 3 -i 218 -x 0500000000"? (Same command CIAJeepDoors runs)
[2024-03-15 18:36:01]
slopi242 :
slopi242 joined the channel.
[2024-03-16 01:44:00]
steve :
steve joined the channel.
[2024-03-16 19:32:37]
artak1710 :
artak1710 joined the channel.
[2024-03-18 20:10:50]
simer :
simer joined the channel.
[2024-03-18 22:40:19]
catmuffins :
catmuffins joined the channel.
[2024-03-18 23:15:24]
catmuffins :
When you plug in usb you should see 2 new tty files in /dev. For my mini 3 it's /dev/ttyACM0 and /dev/ttyACM1.
[2024-03-19 03:49:11]
suenos :
suenos joined the channel.
[2024-03-19 05:43:25]
pawel :
pawel joined the channel.
[2024-03-21 03:46:40]
craigscr18 :
craigscr18 joined the channel.
[2024-03-21 10:35:39]
grizzlox :
grizzlox joined the channel.
[2024-03-21 16:55:58]
edsnowden :
edsnowden joined the channel.
[2024-03-21 20:57:46]
sambodopaksam :
sambodopaksam joined the channel.
[2024-03-23 12:19:56]
linoff :
linoff joined the channel.
[2024-03-23 14:54:40]
sgailu :
sgailu joined the channel.
[2024-03-24 22:15:56]
deadman96385 :
deadman96385 joined the channel.
[2024-03-24 23:12:27]
kempo :
kempo joined the channel.
[2024-03-25 16:19:33]
acunninghamks :
acunninghamks joined the channel.
[2024-03-26 08:21:35]
mrwg888 :
mrwg888 joined the channel.
[2024-03-26 23:50:21]
blowin :
blowin joined the channel.
[2024-03-29 00:24:46]
mstarkey :
mstarkey joined the channel.
[2024-03-29 14:05:40]
mstone :
mstone joined the channel.
[2024-03-29 14:52:31]
surprise :
surprise joined the channel.
[2024-03-30 12:26:18]
aabbas77 :
aabbas77 joined the channel.
[2024-04-01 02:19:51]
aburrido :
aburrido joined the channel.
[2024-04-01 14:42:04]
zliva :
zliva joined the channel.
[2024-04-03 08:01:08]
kmkanony :
kmkanony joined the channel.
[2024-04-03 11:43:07]
arcticfox :
arcticfox joined the channel.
[2024-04-03 13:56:53]
newbie :
newbie joined the channel.
[2024-04-04 22:47:48]
amat :
amat joined the channel.
[2024-04-05 06:39:48]
ar2rgo :
ar2rgo joined the channel.
[2024-04-06 13:10:18]
kent107 :
kent107 joined the channel.
[2024-04-06 14:03:33]
lishujian :
lishujian joined the channel.
[2024-04-06 21:43:01]
jatter :
jatter joined the channel.
[2024-04-07 13:33:43]
qq18873945135 :
qq18873945135 joined the channel.
[2024-04-07 19:07:17]
beny :
beny joined the channel.
[2024-04-08 06:47:15]
anish :
anish joined the channel.
[2024-04-08 14:18:00]
halowarrior8 :
halowarrior8 joined the channel.
[2024-04-12 01:32:04]
pulan :
pulan joined the channel.
[2024-04-12 17:41:56]
ake :
ake joined the channel.
[2024-04-13 01:54:32]
antf1551 :
antf1551 joined the channel.
[2024-04-13 17:49:51]
the_mini2_guy :
the_mini2_guy joined the channel.
[2024-04-14 04:05:55]
vieng :
vieng joined the channel.
[2024-04-15 00:03:15]
vinicio :
vinicio joined the channel.
[2024-04-16 02:04:41]
diogofeitosa :
diogofeitosa joined the channel.
[2024-04-16 03:53:40]
oscarflac :
oscarflac joined the channel.
[2024-04-16 05:41:10]
metalhax :
metalhax joined the channel.
[2024-04-17 13:50:52]
seriouscoal :
seriouscoal joined the channel.
[2024-04-18 18:23:08]
walty :
walty joined the channel.
[2024-04-19 04:21:22]
manoj :
manoj joined the channel.
[2024-04-19 04:46:11]
resposo :
resposo joined the channel.
[2024-04-19 05:37:42]
spaik1 :
spaik1 joined the channel.
[2024-04-19 13:40:33]
franko :
franko joined the channel.
[2024-04-19 14:45:58]
mcconnell997 :
mcconnell997 joined the channel.
[2024-04-19 17:50:58]
loong :
loong joined the channel.
[2024-04-20 19:45:26]
pdru :
pdru joined the channel.
[2024-04-21 21:44:49]
opex_88 :
opex_88 joined the channel.
[2024-04-21 21:46:50]
opex_88 :
opex_88 joined the channel.
[2024-04-22 18:32:12]
dadaviide :
dadaviide joined the channel.
[2024-04-23 07:27:55]
alex_she :
alex_she joined the channel.
[2024-04-23 20:13:52]
mangoslice :
mangoslice joined the channel.
[2024-04-24 02:19:51]
dado2024 :
dado2024 joined the channel.
[2024-04-24 18:45:49]
jacjes :
jacjes joined the channel.
[2024-04-25 14:00:20]
muhou :
muhou joined the channel.
[2024-04-25 21:31:31]
jdphoenix :
jdphoenix joined the channel.
[2024-04-25 23:54:57]
tylerwantsauav :
tylerwantsauav joined the channel.
[2024-04-26 16:43:54]
bensaoui :
bensaoui joined the channel.
[2024-04-27 20:26:29]
xflight :
xflight joined the channel.
[2024-04-28 00:51:41]
rc3928 :
rc3928 joined the channel.
[2024-04-28 19:27:32]
jose12 :
jose12 joined the channel.
[2024-04-29 11:15:48]
djirev86 :
djirev86 joined the channel.
[2024-04-29 19:30:21]
iliya :
iliya joined the channel.
[2024-04-30 12:50:38]
mmm :
mmm joined the channel.
[2024-04-30 16:02:46]
cakenes :
cakenes joined the channel.
[2024-04-30 20:04:52]
sijaw55422 :
sijaw55422 joined the channel.
[2024-05-01 23:22:36]
quakzopas :
quakzopas joined the channel.
[2024-05-02 16:34:31]
kripx :
kripx joined the channel.
[2024-05-04 12:25:57]
jhontameri :
jhontameri joined the channel.
[2024-05-04 23:30:24]
malibuivo :
malibuivo joined the channel.
[2024-05-05 07:10:38]
orag04 :
orag04 joined the channel.
[2024-05-05 08:44:44]
dffd :
dffd joined the channel.
[2024-05-05 13:43:25]
djiuser1 :
djiuser1 joined the channel.
[2024-05-06 13:03:48]
yoyo :
yoyo joined the channel.
[2024-05-06 14:11:16]
raven :
raven joined the channel.
[2024-05-07 07:55:03]
young :
yang_67888 joined the channel.
[2024-05-07 07:57:52]
young :
yang_67888 joined the channel.
[2024-05-07 12:42:47]
sarange :
sarange joined the channel.
[2024-05-08 11:41:42]
severina :
severina joined the channel.
[2024-05-09 01:27:12]
meteocampovolo :
meteocampovolo joined the channel.
[2024-05-09 02:23:22]
casimodo :
casimodo joined the channel.
[2024-05-09 23:29:36]
sifo :
sifo joined the channel.
[2024-05-10 03:58:42]
codebreaker88 :
codebreaker88 joined the channel.
[2024-05-12 14:29:34]
symza :
symza joined the channel.
[2024-05-13 11:44:44]
ron :
ron joined the channel.
[2024-05-14 06:50:10]
griffin :
griffin joined the channel.
[2024-05-14 10:31:20]
zam123 :
zam123 joined the channel.
[2024-05-14 16:38:55]
shenanigans :
shenanigans joined the channel.
[2024-05-14 16:46:39]
steelfly33 :
steelfly33 joined the channel.
[2024-05-15 00:02:31]
ld50 :
ld50 joined the channel.
[2024-05-15 05:12:06]
fabrimath :
fabrimath joined the channel.
[2024-05-15 12:24:50]
chenbinc90 :
chenbinc90 joined the channel.
[2024-05-15 19:08:58]
superduper :
superduper joined the channel.
[2024-05-15 22:17:29]
indimind :
@indimind left the channel.
[2024-05-17 11:29:55]
hash512 :
hash512 joined the channel.
[2024-05-17 13:54:55]
mma :
mma joined the channel.
[2024-05-17 14:07:59]
muctuk2024 :
muctuk2024 joined the channel.
[2024-05-18 09:38:17]
bobsuruncle :
bobsuruncle joined the channel.
[2024-05-20 07:10:14]
ubimo :
ubimo joined the channel.
[2024-05-20 07:41:10]
fruits_biology :
fruits_biology joined the channel.
[2024-05-20 07:49:43]
thanducha :
thanducha joined the channel.
[2024-05-20 08:03:20]
acutus :
acutus joined the channel.
[2024-05-20 11:29:33]
masterguy29 :
masterguy29 joined the channel.
[2024-05-21 07:12:58]
mymail :
@mymail left the channel.
[2024-05-21 12:22:35]
sholihin :
sholihin joined the channel.
[2024-05-21 17:01:25]
snackashack :
snackashack joined the channel.
[2024-05-21 18:01:19]
moduspraxis :
moduspraxis joined the channel.
[2024-05-22 00:23:58]
caracara :
caracara joined the channel.
[2024-05-22 05:45:56]
mtv1 :
mtv1 joined the channel.
[2024-05-22 15:09:00]
amybcr :
amybcr joined the channel.
[2024-05-22 15:17:46]
cepryhbka :
cepryhbka joined the channel.
[2024-05-22 15:36:15]
titainus :
titainus joined the channel.
[2024-05-23 09:57:21]
babublazin :
babublazin joined the channel.
[2024-05-23 16:21:59]
sico :
sico joined the channel.
[2024-05-23 17:53:52]
soaring :
soaring joined the channel.
[2024-05-24 00:50:57]
dimbledoor :
dimbledoor joined the channel.
[2024-05-24 01:13:26]
poweredbyatp :
vollpfoste0. joined the channel.
[2024-05-24 05:39:43]
caomuzi :
caomuzi joined the channel.
[2024-05-25 06:21:35]
holgerjanz :
holgerjanz joined the channel.
[2024-05-25 15:04:58]
cedricdepauw :
cedricdepauw joined the channel.
[2024-05-26 04:50:35]
sakabe :
sakabe joined the channel.
[2024-05-26 10:57:40]
intense :
intense joined the channel.
[2024-05-27 03:37:54]
rturan29 :
rturan29 joined the channel.
[2024-05-28 05:48:49]
dgnxh :
dgnxh joined the channel.
[2024-05-29 06:15:46]
welcomeplayer1234 :
welcomeplayer1234 joined the channel.
[2024-05-29 14:43:57]
zaza :
zaza joined the channel.
[2024-05-29 17:33:10]
welcomeplayer12345 :
welcomeplayer12345 joined the channel.
[2024-05-29 19:22:07]
swaggyc :
swaggyc joined the channel.
[2024-05-29 19:25:05]
swaggyc :
Any instructions on connecting a mini 4 pro via usb and maintain root access via adb with dronehackz?
[2024-05-30 01:25:42]
byxiaobiao :
byxiaobiao joined the channel.
[2024-05-31 23:31:26]
uav0208 :
uav0208 joined the channel.
[2024-06-01 17:56:23]
onola :
onola joined the channel.
[2024-06-02 13:21:41]
ding1714 :
ding1714 joined the channel.
[2024-06-02 15:04:00]
kaban13 :
kaban13 joined the channel.
[2024-06-02 20:14:13]
chris7578 :
chris7578 joined the channel.
[2024-06-03 02:02:50]
tmantheman :
tmantheman joined the channel.
[2024-06-03 04:08:28]
troy :
troy joined the channel.
[2024-06-03 10:03:17]
pinzigu :
pinzigu joined the channel.
[2024-06-03 10:34:34]
d0ps :
d0ps joined the channel.
[2024-06-04 01:13:17]
devnull :
devnull joined the channel.
[2024-06-04 08:38:30]
person :
person joined the channel.
[2024-06-04 17:10:27]
infectedfpv :
infectedfpv joined the channel.
[2024-06-05 21:18:21]
kejopo :
kejopo joined the channel.
[2024-06-06 00:17:54]
wooom :
wooom joined the channel.
[2024-06-06 10:18:44]
mike :
mike joined the channel.
[2024-06-07 00:36:13]
kristen :
kristen joined the channel.
[2024-06-07 08:00:54]
ebi01 :
ebi01 joined the channel.
[2024-06-07 16:25:07]
gixxerturbo :
gixxerturbo joined the channel.
[2024-06-08 05:48:14]
qw591132059. :
qw591132059. joined the channel.
[2024-06-08 11:30:37]
tombstone :
tombstone joined the channel.
[2024-06-09 17:29:26]
johnsmith756 :
johnsmith756 joined the channel.
[2024-06-10 13:49:53]
csdcsd :
csdcsd joined the channel.
[2024-06-11 18:38:50]
vsofiy :
vsofiy joined the channel.
[2024-06-11 23:06:27]
lampje83 :
lampje83 joined the channel.
[2024-06-12 06:50:37]
lonnie070 :
lonnie070 joined the channel.
[2024-06-12 14:39:20]
ogini_ayotanom :
ogini_ayotanom joined the channel.
[2024-06-13 07:37:55]
jbaker0024 :
jbaker0024 joined the channel.
[2024-06-13 08:27:34]
strawhat99 :
strawhat99 joined the channel.
[2024-06-13 10:38:37]
fernpilot :
fernpilot joined the channel.
[2024-06-13 20:18:51]
hate :
hate joined the channel.
[2024-06-14 00:55:25]
jicheng :
jicheng joined the channel.
[2024-06-14 07:00:45]
mowchen :
mowchen joined the channel.
[2024-06-14 10:25:12]
mar7o :
mar7o joined the channel.
[2024-06-15 06:31:13]
techcyn :
techcyn joined the channel.
[2024-06-15 13:29:10]
ggomezg :
ggomezg joined the channel.
[2024-06-15 14:54:15]
djgarbus :
djgarbus joined the channel.
[2024-06-15 18:06:45]
beammp :
beammp joined the channel.
[2024-06-16 12:52:40]
ly8383 :
ly8383 joined the channel.
[2024-06-16 23:50:42]
kc4runner :
kc4runner joined the channel.
[2024-06-18 05:34:33]
febag :
febag joined the channel.
[2024-06-18 05:44:52]
mrsmith :
mrsmith joined the channel.
[2024-06-18 21:02:27]
broyang :
sklein joined the channel.
[2024-06-20 02:17:15]
billgreen :
billgreen joined the channel.
[2024-06-20 14:42:56]
bsormagec :
bsormagec joined the channel.
[2024-06-20 19:56:28]
wxuuuu :
wxuuuu joined the channel.
[2024-06-21 09:24:53]
cdmzero :
cdmzero joined the channel.
[2024-06-21 13:07:08]
promotion7548 :
promotion7548 joined the channel.
[2024-06-21 21:07:16]
msahagun :
msahagun joined the channel.
[2024-06-22 04:14:30]
uberflyer :
uberflyer joined the channel.
[2024-06-22 11:03:42]
flipstack :
flipstack joined the channel.
[2024-06-22 18:16:01]
lositskiy.m :
lositskiy.m joined the channel.
[2024-06-22 21:23:03]
paulo :
paulo joined the channel.
[2024-06-22 21:50:54]
kelix1938 :
kelix1938 joined the channel.
[2024-06-22 22:40:16]
qr25 :
qr25 joined the channel.
[2024-06-22 22:50:17]
phantom4pro.v2.0 :
phantom4pro.v2.0 joined the channel.
[2024-06-23 01:59:07]
x111 :
x111 joined the channel.
[2024-06-23 02:11:57]
junie :
junie joined the channel.
[2024-06-23 05:40:27]
realkrisi :
realkrisi joined the channel.
[2024-06-23 12:35:54]
danmoto :
danmoto joined the channel.
[2024-06-24 05:55:07]
wangmeina :
wangmeina joined the channel.
[2024-06-25 07:06:24]
deejayeye :
deejayeye joined the channel.
[2024-06-25 11:28:16]
pouyapm :
pouyapm joined the channel.
[2024-06-25 17:22:10]
kek0demon :
kek0demon joined the channel.
[2024-06-26 06:23:41]
ccc :
ccc joined the channel.
[2024-06-26 06:31:11]
zaenal :
zaenal joined the channel.
[2024-06-26 06:34:30]
ckdkdkkd :
ckdkdkkd joined the channel.
[2024-06-26 13:38:28]
kowoos :
kowoos joined the channel.
[2024-06-26 18:19:34]
giles :
giles joined the channel.
[2024-06-26 23:31:57]
johnibhramin :
@johnibhramin left the channel.
[2024-06-27 02:59:36]
mb269 :
mb269 joined the channel.
[2024-06-27 04:12:46]
tracy :
tracy joined the channel.
[2024-06-27 11:54:11]
rlandor :
rlandor joined the channel.
[2024-06-27 12:06:56]
rlandor :
Hi! I have a mini 3 pro and use it with the rc pro controller. I recently went on holiday and took the drone with me and suddenly I was restricted to fly only for like 30 meters or so. Is anyone aware of a modification to make sure that a logout does not take place? I think it has to be a modification on the controller apk, not on the drone itself?
[2024-06-27 14:41:21]
mattls :
mattls joined the channel.
[2024-06-27 14:57:21]
pingspike :
you could just open the app once a month to prevent it
[2024-06-27 15:52:36]
neverbobomalem :
neverbobomalem joined the channel.
[2024-06-27 20:33:44]
rlandor :
Well, that's a workaround but not a feasible one. I was hoping to keep my controller and drone disconnected from the cloud. But this way DJI seems to want to enforce updates (I think the NFZ database?).
[2024-06-28 20:01:34]
mrsmith :
Hey guys, I was wondering if someone could help me out here.
I have a two errors on my Mini 3 Pro's downward vision sensors and I'm unable to find anything online - error codes 1a010040 and 1a010041. Does anyone know where I could find more info on those error codes? I tried calibrating using DJI assistant 2 but the bottom sensors are black.
[2024-06-28 20:01:34]
mrsmith :
Hey guys, I was wondering if someone could help me out here.
I have a two errors on my Mini 3 Pro's downward vision sensors and I'm unable to find anything online - error codes 1a010040 and 1a010041. Does anyone know where I could find more info on those error codes?
[2024-06-28 20:02:20]
mrsmith :
[2024-06-29 05:10:31]
unix_f :
unix_f joined the channel.
[2024-06-30 09:51:52]
konraditurbe :
konraditurbe joined the channel.
[2024-07-01 10:56:41]
wildwildo :
wildwildo joined the channel.
[2024-07-01 22:45:38]
blandreth94 :
blandreth94 joined the channel.
[2024-07-04 02:32:38]
sigourney :
sigourney joined the channel.
[2024-07-04 14:18:13]
mueskeyoutsey :
mueskeyoutsey joined the channel.
[2024-07-05 08:35:29]
siko :
siko joined the channel.
[2024-07-05 11:16:48]
yongyilao :
If you have the calibration errors 40011 and 10016 of air3 and mini4pro, you can ask me and I can help.
[2024-07-05 11:57:47]
aotusay :
aotusay joined the channel.
[2024-07-06 16:42:18]
kirbi100 :
kirbi100 joined the channel.
[2024-07-07 00:36:46]
cs2002 :
cs2002 joined the channel.
[2024-07-08 00:40:46]
bobbie :
bobbie joined the channel.
[2024-07-10 03:39:36]
qq2887755 :
qq2887755 joined the channel.
[2024-07-10 04:30:14]
walkerherry5575 :
walkerherry5575 joined the channel.
[2024-07-10 05:52:05]
dandwich :
dandwich joined the channel.
[2024-07-10 17:13:04]
jaguar01 :
jaguar01 joined the channel.
[2024-07-12 01:41:21]
csnyder154 :
csnyder154 joined the channel.
[2024-07-12 09:35:17]
zapper77 :
zapper77 joined the channel.
[2024-07-12 15:59:23]
koxxll :
koxxll joined the channel.
[2024-07-13 19:04:21]
mangobot :
mangobot joined the channel.
[2024-07-14 03:54:30]
specnaz :
specnaz joined the channel.
[2024-07-15 03:58:19]
nicklu :
nicklu joined the channel.
[2024-07-15 17:57:10]
kousami7chir :
kousami7chir joined the channel.
[2024-07-16 01:47:54]
skibol20 :
skibol20 joined the channel.
[2024-07-16 08:31:20]
expl0it-dro :
expl0it-dro joined the channel.
[2024-07-16 12:58:53]
carlos.cadu :
carlos.cadu joined the channel.
[2024-07-16 16:58:41]
kane.miller :
kane.miller joined the channel.
[2024-07-16 21:59:01]
kiran :
kiran joined the channel.
[2024-07-17 05:09:00]
mainforce :
mainforce joined the channel.
[2024-07-17 10:48:35]
yanyy :
yanyy joined the channel.
[2024-07-18 02:14:18]
gdnz :
gdnz joined the channel.
[2024-07-18 02:28:14]
trotyl :
trotyl joined the channel.
[2024-07-19 17:19:22]
rudem :
rudem joined the channel.
[2024-07-20 05:55:40]
mrsentry :
mrsentry joined the channel.
[2024-07-20 10:06:31]
cforge :
cforge joined the channel.
[2024-07-21 01:31:11]
killajack :
killajack joined the channel.
[2024-07-21 04:05:33]
misroen :
misroen joined the channel.
[2024-07-21 13:37:44]
cuboide :
cuboide joined the channel.
[2024-07-21 18:02:18]
olivierw :
olivierw joined the channel.
[2024-07-22 16:25:19]
kimphy :
kimphy joined the channel.
[2024-07-23 21:03:12]
dbns :
@carmix do you know if there has been any progress lately in the reversing of modemarm or mavic rcs in general?
[2024-07-23 22:11:43]
mgri3 :
mgri3 joined the channel.
[2024-07-24 05:15:00]
razza :
razza joined the channel.
[2024-07-24 06:25:28]
carmix :
Not so much indeed, modemarm is armv7 and can be reversed with some patience even if it is a raw binary without the elf structure, modemdsp on the other side is a proprietary ceva architecture and there is no plugin available for ida or ghidra, moreover the instruction set also is undisclosed, so it is very hard. Anyway it must be said that a lot of functions related to the radio channel are implemented directly in hardware, so unfortunately there is no free meal
[2024-07-25 07:25:44]
dronecod1523 :
dronecod1523 joined the channel.
[2024-07-25 08:41:18]
schampango :
schampango joined the channel.
[2024-07-25 08:59:46]
artem :
artem joined the channel.
[2024-07-25 13:33:16]
fuckroyal :
fuckroyal joined the channel.
[2024-07-25 13:51:33]
ahmet.kurt8 :
ahmet.kurt8 joined the channel.
[2024-07-26 06:11:03]
dgchyou :
dgchyou joined the channel.
[2024-07-26 06:17:51]
hao1997 :
hao1997 joined the channel.
[2024-07-26 09:07:19]
domoe :
domoe joined the channel.
[2024-07-26 15:51:24]
theguac :
theguac joined the channel.
[2024-07-27 12:12:58]
vicgoncharenko :
vicgoncharenko joined the channel.
[2024-07-27 14:29:19]
prabhu8489 :
prabhu8489 joined the channel.
[2024-07-28 09:38:27]
flyonandonandon :
flyonandonandon joined the channel.
[2024-07-28 11:22:24]
randombyte58 :
randombyte58 joined the channel.
[2024-07-29 06:28:58]
sentry :
sentry joined the channel.
[2024-07-29 12:48:36]
spock :
spock joined the channel.
[2024-07-31 09:02:32]
dbns :
~~How worried should i be if my status leds are solid red on my m2p~~ fixed after imu calibration
[2024-07-31 09:02:32]
dbns :
How worried should i be if my status leds are solid red on my m2p
[2024-07-31 10:04:08]
hc_1982 :
hc_1982 joined the channel.
[2024-07-31 19:48:02]
vikman :
vikman joined the channel.
[2024-07-31 21:28:53]
hate :
@hate left the channel.
[2024-08-01 10:05:03]
cayuga33 :
cayuga33 joined the channel.
[2024-08-02 18:26:07]
uoeno :
uoeno joined the channel.
[2024-08-02 21:53:38]
catus :
catus joined the channel.
[2024-08-03 05:23:20]
weiguang :
weiguang joined the channel.
[2024-08-03 07:23:10]
broown :
broown joined the channel.
[2024-08-03 14:28:46]
zhangbajie :
zhangbajie joined the channel.
[2024-08-03 18:30:03]
andrew.john.kucharski :
andrew.john.kucharski joined the channel.
[2024-08-03 23:01:56]
stephane1968 :
stephane1968 joined the channel.
[2024-08-04 02:10:48]
sushitakoz :
sushitakoz joined the channel.
[2024-08-05 04:57:40]
vanhandle2 :
vanhandle2 joined the channel.
[2024-08-05 05:38:17]
mnxdigital :
mnxdigital joined the channel.
[2024-08-06 13:15:19]
woailuo :
woailuo joined the channel.
[2024-08-06 22:22:19]
cimo :
cimo joined the channel.
[2024-08-07 09:18:36]
li8bobo :
li8bobo joined the channel.
[2024-08-07 09:44:55]
hmour :
hmour joined the channel.
[2024-08-08 21:12:28]
coolfogo :
coolfogo joined the channel.
[2024-08-08 23:36:44]
pray4weebs :
pray4weebs joined the channel.
[2024-08-09 08:13:54]
ablaz :
ablaz joined the channel.
[2024-08-11 01:13:58]
jakethebake :
jakethebake joined the channel.
[2024-08-14 07:51:36]
joseravat :
joseravat joined the channel.
[2024-08-14 16:18:03]
kaweisam :
kaweisam joined the channel.
[2024-08-14 20:44:13]
dezz :
dezz joined the channel.
[2024-08-15 04:24:58]
ala :
ala joined the channel.
[2024-08-15 10:47:48]
runner2 :
runner2 joined the channel.
[2024-08-15 11:52:27]
seanhe266 :
seanhe266 joined the channel.
[2024-08-15 13:19:23]
youngtze :
youngtze joined the channel.
[2024-08-16 07:37:53]
welcomeplayer123456 :
welcomeplayer123456 joined the channel.
[2024-08-17 10:57:52]
gg02 :
gg02 joined the channel.
[2024-08-17 19:41:46]
zyxel :
zyxel joined the channel.
[2024-08-18 02:35:25]
coke :
yuelove joined the channel.
[2024-08-18 22:00:54]
parkseycdf :
parkseycdf joined the channel.
[2024-08-19 12:29:14]
daiguojin :
daiguojin joined the channel.
[2024-08-20 03:27:06]
pcphriek :
pcphriek joined the channel.
[2024-08-20 06:23:21]
ricardomendez :
ricardomendez joined the channel.
[2024-08-20 20:45:09]
eyesupdroneservices :
eyesupdroneservices joined the channel.
[2024-08-21 03:43:04]
espacial :
espacial joined the channel.
[2024-08-21 06:38:00]
barrybond :
barrybond joined the channel.
[2024-08-21 11:34:53]
resetez :
resetez joined the channel.
[2024-08-22 11:05:47]
rebootoz :
rebootoz joined the channel.
[2024-08-22 18:14:24]
dswelch51964 :
dswelch51964 joined the channel.
[2024-08-22 18:29:15]
clait :
clait joined the channel.
[2024-08-23 13:45:17]
d4saher :
d4saher joined the channel.
[2024-08-24 06:06:36]
michaelm6644 :
michaelm6644 joined the channel.
[2024-08-24 14:41:51]
djijakerev :
djijakerev joined the channel.
[2024-08-25 06:30:58]
liuhaitao :
liuhaitao joined the channel.
[2024-08-26 19:25:20]
mdly :
mdly joined the channel.
[2024-08-27 14:48:27]
velokoraptus :
velokoraptus joined the channel.
[2024-08-27 16:24:42]
dfcloud :
dfcloud joined the channel.
[2024-08-28 00:54:01]
konplx :
konplx joined the channel.
[2024-08-28 08:06:59]
banen :
banen joined the channel.
[2024-08-28 08:13:47]
smallyang :
smallyang joined the channel.
[2024-08-28 13:28:00]
stille :
stille joined the channel.
[2024-08-29 02:23:48]
raouldukesf :
raouldukesf joined the channel.
[2024-08-29 08:39:02]
stille :
Hi guys. Sorry for the ultimately newbie questions, but i am just about to revive my old mini. Where can i find my user code, and what do i need it for?
[2024-08-29 18:42:07]
cs2000 :
What user code @stille ?
[2024-08-30 00:40:43]
qcwxh :
qcwxh joined the channel.
[2024-08-30 01:51:43]
renzo :
renzo joined the channel.
[2024-08-30 01:52:05]
dji-revolution :
dji-revolution joined the channel.
[2024-08-30 05:59:02]
stille :
This one
[2024-08-30 05:59:11]
stille :
@cs2000
[2024-08-30 13:30:41]
fsdfsdfsdf :
fsdfsdfsdf joined the channel.
[2024-08-30 13:36:31]
renzo :
Does anyone know of any dji drones that don't run android specifically and instead run a generic Linux kernel?
[2024-08-30 13:45:24]
renzo :
Or if there are particular SoCs in a mavic(or whatever) that run generic Linux, if for example the main FC always runs android
[2024-08-30 21:13:03]
cs2000 :
Ahh, thats my system, if you dont have one, you dont need one :)
[2024-08-30 22:22:41]
stipa :
stipa joined the channel.
[2024-08-31 02:43:30]
zar1n :
zar1n joined the channel.
[2024-09-01 06:49:45]
tacioli.master :
tacioli.master joined the channel.
[2024-09-01 08:04:06]
f1nder :
f1nder joined the channel.
[2024-09-01 16:43:10]
jacek :
jacek joined the channel.
[2024-09-02 01:41:22]
devoir :
devoir joined the channel.
[2024-09-04 07:00:49]
jeleuw :
jeleuw joined the channel.
[2024-09-04 09:37:14]
boeing757 :
boeing757 joined the channel.
[2024-09-05 08:28:55]
cmdjbst :
cmdjbst joined the channel.
[2024-09-05 13:26:05]
ako3100 :
ako3100 joined the channel.
[2024-09-05 23:19:19]
vitaliy79 :
vitaliy79 joined the channel.
[2024-09-07 09:57:48]
greg :
greg joined the channel.
[2024-09-07 16:36:27]
ultrazorch :
ultrazorch joined the channel.
[2024-09-07 17:57:55]
fjez :
fjez joined the channel.
[2024-09-08 17:01:24]
rayik18118 :
rayik18118 joined the channel.
[2024-09-08 18:15:23]
zero007 :
zero007 joined the channel.
[2024-09-09 06:09:23]
turr7 :
turr7 joined the channel.
[2024-09-09 18:51:52]
vik92md :
vik92md joined the channel.
[2024-09-10 21:31:44]
bulcaano :
bulcaano joined the channel.
[2024-09-11 04:25:02]
scottiez :
scottiez joined the channel.
[2024-09-11 12:32:19]
dack :
dack joined the channel.
[2024-09-11 20:49:24]
taters66 :
taters66 joined the channel.
[2024-09-11 22:07:24]
fred73 :
fred73 joined the channel.
[2024-09-12 07:56:04]
xfxanna :
xfxanna joined the channel.
[2024-09-12 08:35:41]
tbsoup :
tbsoup joined the channel.
[2024-09-12 13:20:50]
h1316 :
h1316 joined the channel.
[2024-09-12 14:30:00]
wilko :
wilko joined the channel.
[2024-09-12 17:23:14]
whitec :
whitec joined the channel.
[2024-09-12 23:42:26]
irevdj :
irevdj joined the channel.
[2024-09-13 10:01:59]
lawliet95 :
lawliet95 joined the channel.
[2024-09-14 14:03:25]
team-x380 :
team-x380 joined the channel.
[2024-09-14 20:44:25]
khader :
khader joined the channel.
[2024-09-15 19:02:19]
papalegba :
No generic Linux that I know of.
[2024-09-16 09:05:00]
alan1020456 :
alan1020456 joined the channel.
[2024-09-17 16:21:24]
hackycrash :
hackycrash joined the channel.
[2024-09-18 04:38:22]
pauln420 :
pauln420 joined the channel.
[2024-09-18 06:02:38]
lorisdem :
lorisdem joined the channel.
[2024-09-18 13:08:39]
cdimage :
cdimage joined the channel.
[2024-09-18 23:57:42]
bakri_drone :
bakri_drone joined the channel.
[2024-09-20 09:10:51]
marama1770 :
marama1770 joined the channel.
[2024-09-22 04:18:42]
thecatism :
thecatism joined the channel.
[2024-09-22 05:56:53]
schulrog :
schulrog joined the channel.
[2024-09-22 14:11:07]
lstange :
lstange joined the channel.
[2024-09-23 12:00:38]
linux :
linux joined the channel.
[2024-09-24 02:54:57]
lucidnx :
lucidnx joined the channel.
[2024-09-25 09:22:13]
sss :
sss joined the channel.
[2024-09-26 18:08:49]
crossyourself :
aronzvi joined the channel.
[2024-09-27 04:43:35]
acebet :
acebet joined the channel.
[2024-10-01 06:09:48]
drapedup1 :
drapedup1 joined the channel.
[2024-10-01 13:22:42]
mihcio2345 :
mihcio2345 joined the channel.
[2024-10-03 07:34:41]
mnia93 :
mnia93 joined the channel.
[2024-10-03 12:04:41]
chicodjiboss :
chicodjiboss joined the channel.
[2024-10-04 03:28:55]
drhydephd :
drhydephd joined the channel.
[2024-10-05 04:33:10]
blnq :
blnq joined the channel.
[2024-10-06 02:34:46]
segass :
segass joined the channel.
[2024-10-07 18:36:58]
tokertm :
tokertm joined the channel.
[2024-10-07 19:27:42]
djiboywv :
djiboywv joined the channel.
[2024-10-07 22:25:55]
kamitu254 :
kamitu254 joined the channel.
[2024-10-08 14:00:38]
sven07k :
sven07k joined the channel.
[2024-10-08 15:20:07]
summer :
summer joined the channel.
[2024-10-09 04:30:25]
powlery :
powlery joined the channel.
[2024-10-09 07:05:18]
aminfarmer :
aminfarmer joined the channel.
[2024-10-09 08:29:49]
vikvel :
vikvel joined the channel.
[2024-10-10 13:13:35]
ojackol :
ojackol joined the channel.
[2024-10-10 14:49:10]
wangxiang :
wangxiang joined the channel.
[2024-10-11 22:16:17]
erolmutlu :
erolmutlu joined the channel.
[2024-10-12 17:20:42]
sula58 :
sula58 joined the channel.
[2024-10-14 14:40:53]
vudla :
vudla joined the channel.
[2024-10-14 15:07:06]
shonuff :
shonuff joined the channel.
[2024-10-14 16:01:00]
user1 :
user1 joined the channel.
[2024-10-14 19:13:34]
xin :
xin joined the channel.
[2024-10-15 09:47:47]
ivan :
ivan joined the channel.
[2024-10-15 14:54:18]
iammins :
iammins joined the channel.
[2024-10-15 15:06:06]
boris :
boris joined the channel.
[2024-10-16 01:40:40]
emerson :
emerson joined the channel.
[2024-10-16 02:26:39]
dubtech :
dubtech joined the channel.
[2024-10-16 09:28:30]
desertxp :
desertxp joined the channel.
[2024-10-16 17:25:00]
yougz11 :
yougz11 joined the channel.
[2024-10-18 07:45:43]
rcf88888 :
rcf88888 joined the channel.
[2024-10-18 13:15:00]
kkaerich :
kkaerich joined the channel.
[2024-10-18 17:54:06]
wassim :
wassim joined the channel.
[2024-10-19 00:44:35]
sloboda :
sloboda joined the channel.
[2024-10-19 02:22:24]
ritada6919 :
ritada6919 joined the channel.
[2024-10-20 07:56:59]
starlin :
starlin joined the channel.
[2024-10-21 01:01:18]
supermario7331 :
supermario7331 joined the channel.
[2024-10-21 14:08:53]
therooster9674 :
therooster9674 joined the channel.
[2024-10-22 10:35:49]
paddymatt :
paddymatt joined the channel.
[2024-10-22 22:51:45]
mikem :
mikem joined the channel.
[2024-10-23 17:41:56]
rafaelcarboni :
rafaelcarboni joined the channel.
[2024-10-23 18:12:08]
hab :
hab joined the channel.
[2024-10-24 12:25:21]
keveras :
keveras joined the channel.
[2024-10-27 02:13:54]
cowfog :
cowfog joined the channel.
[2024-10-27 06:53:13]
rubieyyyyyy :
rubieyyyyyy joined the channel.
[2024-10-27 17:39:08]
dji876 :
dji876 joined the channel.
[2024-10-28 00:47:23]
shivam.sh :
shivam.sh joined the channel.
[2024-10-29 07:37:20]
procsacs :
procsacs joined the channel.
[2024-10-30 01:51:40]
ssemmedo :
ssemmedo joined the channel.
[2024-10-30 12:39:52]
cooltech :
cooltech joined the channel.
[2024-10-30 13:43:19]
fvaldivia :
fvaldivia joined the channel.
[2024-11-01 11:12:54]
home114 :
home114 joined the channel.
[2024-11-01 12:52:22]
hyunsoocha :
hyunsoocha joined the channel.
[2024-11-01 15:51:27]
vipindji :
vipindji joined the channel.
[2024-11-01 20:03:45]
faet-56 :
faet-56 joined the channel.
[2024-11-02 15:23:11]
bulger :
bulger joined the channel.
[2024-11-03 19:13:47]
rasco :
rasco joined the channel.
[2024-11-03 22:26:51]
marvsinspired :
marvsinspired joined the channel.
[2024-11-04 07:40:35]
yuvalhir :
yuvalhir joined the channel.
[2024-11-05 07:35:33]
feifeitu :
feifeitu joined the channel.
[2024-11-05 15:44:39]
skater :
skater joined the channel.
[2024-11-05 20:57:19]
nodraft :
nodraft joined the channel.
[2024-11-07 14:05:19]
suiqian007 :
suiqian007 joined the channel.
[2024-11-07 18:58:03]
mrchriz :
mrchriz joined the channel.
[2024-11-08 13:51:10]
cyberdjomla :
cyberdjomla joined the channel.
[2024-11-08 19:47:44]
turkfx :
turkfx joined the channel.
[2024-11-08 21:42:57]
ulcha :
ulcha joined the channel.
[2024-11-09 09:13:34]
nig3tca1 :
nig3tca1 joined the channel.
[2024-11-09 17:56:56]
konraditurbe :
Anyone faced this issue before:
Mavic 3 wm260, running 1001, everything was fine but now I try to turn it on and it doesn't power on. Battery shows full bars but there's no boot sound and the gimbal doesn't move, the drone also doesn't charge at all, but the battery does seem to work. Tried everything, removing / inserting again, trying to charge with multiple chargers, nothing seems to work
[2024-11-09 18:13:51]
flylusive_pat :
Does it talk to USB?
[2024-11-09 18:14:42]
flylusive_pat :
If so, ot could be just in failsafe mode (likely FC crashed).
[2024-11-09 18:14:42]
flylusive_pat :
If so, it could be just in failsafe mode (likely FC crashed).
[2024-11-09 18:34:18]
konraditurbe :
No USB, assistant/drone hacks doesn't see it
[2024-11-09 18:38:04]
flylusive_pat :
Uf, that sounds more like hardware problem. Check if ESC has power.
[2024-11-09 18:38:51]
flylusive_pat :
It has two SoC's, the first one talks to USB / controls gimbal, and second has FC. So if 1001 crashed (FC), it would at least talk.
[2024-11-09 18:38:51]
flylusive_pat :
It has two SoC's, the first one talks to USB, and second has FC. So if 1001 crashed (FC), it would at least talk.
[2024-11-09 18:47:01]
konraditurbe :
USB is completely dead, tried multiple cables and multiple chargers, not sure how to check for ESC liveness
[2024-11-09 19:31:15]
konraditurbe :
Ok the trick was to ram the battery turned on, not sure why the previous times it didn't work, but I tried it now, battery on and press it hard against the drone, maybe it was the force that did it lol
[2024-11-10 11:00:22]
uskve :
sounds like a bad battery contact
[2024-11-10 17:40:05]
gennady :
gennady joined the channel.
[2024-11-11 06:16:18]
ksd :
ksd joined the channel.
[2024-11-12 00:38:19]
anon80 :
anon80 joined the channel.
[2024-11-14 01:06:21]
wonjun100 :
wonjun100 joined the channel.
[2024-11-14 02:16:09]
beastean :
beastean joined the channel.
[2024-11-14 15:02:26]
zirkoneone :
zirkoneone joined the channel.
[2024-11-15 02:53:40]
seveneightoo :
seveneightoo joined the channel.
[2024-11-15 10:44:25]
mxd8622e :
mxd8622e joined the channel.
[2024-11-15 17:54:13]
djim30 :
djim30 joined the channel.
[2024-11-17 06:56:29]
maxx123 :
maxx123 joined the channel.
[2024-11-18 02:55:15]
lihongyang :
lihongyang joined the channel.
[2024-11-19 16:14:38]
fandox :
fandox joined the channel.
[2024-11-19 23:14:56]
lizard88 :
lizard88 joined the channel.
[2024-11-21 05:07:13]
roxeve :
roxeve joined the channel.
[2024-11-21 14:11:16]
noob76rr :
noob76rr joined the channel.
[2024-11-23 07:59:53]
ksjr927 :
ksjr927 joined the channel.
[2024-11-23 18:43:52]
ox3d :
ox3d joined the channel.
[2024-11-24 15:43:23]
fadetes121 :
fadetes121 joined the channel.
[2024-11-25 11:20:59]
robxs1 :
robxs1 joined the channel.
[2024-11-25 13:23:13]
frankgeym :
frankgeym joined the channel.
[2024-11-25 15:37:07]
omar77 :
omar77 joined the channel.
[2024-11-25 20:07:20]
nlev :
nlev joined the channel.
[2024-11-26 04:09:59]
deleted_account :
davidbuzz joined the channel.
[2024-11-26 18:08:16]
isleemo :
isleemo joined the channel.
[2024-11-27 00:59:29]
randomboba :
randomboba joined the channel.
[2024-11-27 02:02:10]
jwlfarms :
jwlfarms joined the channel.
[2024-11-27 15:53:27]
lana :
lana joined the channel.
[2024-11-28 05:05:18]
soft-aerials :
soft-aerials joined the channel.
[2024-11-28 22:47:26]
sirhaxalot :
sirhaxalot joined the channel.
[2024-11-29 11:56:39]
gigigiap :
gigigiap joined the channel.
[2024-11-30 01:27:09]
karbauskis.karbauskis :
karbauskis.karbauskis joined the channel.
[2024-11-30 07:59:55]
shutter :
shutter joined the channel.
[2024-12-01 18:24:23]
klapwaus :
klapwaus joined the channel.
[2024-12-03 02:39:27]
yz2528 :
yz2528 joined the channel.
[2024-12-03 10:37:33]
bearer :
bearer joined the channel.
[2024-12-05 00:59:07]
thyhack :
thyhack joined the channel.
[2024-12-05 07:54:15]
hyuns :
hyuns joined the channel.
[2024-12-05 08:51:03]
vizdrone :
vizdrone joined the channel.
[2024-12-05 09:05:16]
eveneden :
eveneden joined the channel.
[2024-12-08 15:32:10]
khsfbjs :
khsfbjs joined the channel.
[2024-12-09 10:23:39]
anon038 :
anon038 joined the channel.
[2024-12-09 18:35:03]
szeretem :
szeretem joined the channel.
[2024-12-09 19:13:23]
alsush :
alsush joined the channel.
[2024-12-10 19:45:14]
omerkamal :
omerkamal joined the channel.
[2024-12-11 14:37:30]
vlourie :
vlourie joined the channel.
[2024-12-12 11:48:04]
july :
july joined the channel.
[2024-12-13 01:28:23]
david2212 :
david2212 joined the channel.
[2024-12-14 22:11:39]
djpisar1984 :
djpisar1984 joined the channel.
[2024-12-15 19:29:01]
bun909 :
bun909 joined the channel.
[2024-12-16 02:22:56]
jame :
jame joined the channel.
[2024-12-16 10:48:38]
c3podaniel :
c3podaniel joined the channel.
[2024-12-18 21:06:08]
banknotegeneralz :
banknotegeneralz joined the channel.
[2024-12-19 00:26:11]
jayj :
jayj joined the channel.
[2024-12-19 01:45:36]
dbispo :
dbispo joined the channel.
[2024-12-19 08:22:48]
pete67 :
pete67 joined the channel.
[2024-12-19 23:12:10]
ruh :
ruh joined the channel.
[2024-12-20 04:38:36]
klbn1991 :
klbn1991 joined the channel.
[2024-12-20 08:03:13]
deltasez :
deltasez joined the channel.
[2024-12-20 08:28:01]
deltasez :
hello all, Im super new to this and need a bit of advice. Its a work device and im located in a country where DJI support isnt available. I have an M30T and the RC Plus and since the last two official updates.
1) I have been haunted but two thing. The RC (internal bat) will not charge via usb c (tried multiple adapters, cables and the BS). The only time i can charge the internal bat via the removable battery. Also, sometimes the LED indicators show it is charging when its not connected.
2) Since the last official update, whenever RC connects to drone after a restart, the camera feed or RC is black, i can still, fly LOS, control gimble and take pictures and videos but no live feed. The only way i can get it working is but shutind down RC, starting is back up connect to USB pc and the DJI Assistant) i dont have to do anything else. Then the feed comes straight away. I this always happens if i turn off the RC (it shows feed fine if i turn off aircraft and rc is on) as soon as i shutdown or reboot RC i lose the feed.
Im trying to downgrade RC firmware and came across DDD as no longer have that option in DJI Ass! Trying to figure out how to flash he firmware now
For a backstory, UAS was used for my work and Im fully responsible for it. I work for a small Gov and device was previously serviced by a contractor who knows less than me and we has advised we buy a new one :(
[2024-12-20 13:57:51]
leonid :
leonid joined the channel.
[2024-12-20 16:10:10]
flylusive_pat :
use drone hacks v2
[2024-12-20 16:10:18]
flylusive_pat :
it has built in flasher with built in firmware downloader
[2024-12-20 16:39:34]
captamerica :
captamerica joined the channel.
[2024-12-23 01:54:54]
huizhihua :
huizhihua joined the channel.
[2024-12-23 01:58:56]
huizhihua :
hello
[2024-12-23 13:00:32]
osama-binladen :
osama-binladen joined the channel.
[2024-12-23 15:14:01]
slashster :
slashster joined the channel.
[2024-12-25 20:38:27]
paribo7913 :
paribo7913 joined the channel.
[2024-12-25 20:42:04]
paribo7913 :
So I modded the dji go app version 4.1.20 but cant launch it on Android 14. It does work on my old Android 10 phone tho. Is there a way to make it be able to run on Android 14?
[2024-12-26 19:05:10]
yulinjun :
yulinjun joined the channel.
[2024-12-27 01:15:35]
huki :
huki joined the channel.
[2024-12-27 14:56:19]
amir :
amir joined the channel.
[2024-12-28 07:21:36]
s2294030894 :
s2294030894 joined the channel.
[2024-12-28 18:58:11]
samblia :
samblia joined the channel.
[2024-12-29 03:59:05]
rafcio199604 :
rafcio199604 joined the channel.
[2024-12-29 10:47:48]
shyelc :
shyelc joined the channel.
[2024-12-30 19:29:45]
ustayready :
ustayready joined the channel.
[2024-12-30 19:39:29]
thesmells :
thesmells joined the channel.
[2024-12-31 05:16:03]
varv0id :
varv0id joined the channel.
[2025-01-02 05:45:31]
liulwn :
liulwn joined the channel.
[2025-01-02 16:20:13]
ylb19850205 :
ylb19850205 joined the channel.
[2025-01-04 04:24:11]
louis9696000 :
louis9696000 joined the channel.
[2025-01-04 16:42:35]
lisser :
lisser joined the channel.
[2025-01-05 02:34:40]
servetgdr :
servetgdr joined the channel.
[2025-01-05 06:32:32]
grizzfu :
grizzfu joined the channel.
[2025-01-05 18:34:54]
saurabh.gala51 :
saurabh.gala51 joined the channel.
[2025-01-06 17:26:02]
mrbondofpv :
mrbondofpv joined the channel.
[2025-01-07 08:23:38]
fons :
fons joined the channel.
[2025-01-07 15:54:31]
ghetto :
ghetto joined the channel.
[2025-01-08 20:36:05]
mikha_fpv :
mikha_fpv joined the channel.
[2025-01-09 10:51:10]
n300 :
n300 joined the channel.
[2025-01-10 08:45:03]
manusiapasti :
manusiapasti joined the channel.
[2025-01-10 18:49:44]
okazeem :
okazeem joined the channel.
[2025-01-13 06:24:28]
k45p3r :
k45p3r joined the channel.
[2025-01-14 15:58:07]
nicolas :
nicolas joined the channel.
[2025-01-15 01:54:22]
renmingcan :
renmingcan joined the channel.
[2025-01-15 17:01:45]
angrykurd :
angrykurd joined the channel.
[2025-01-15 18:24:13]
xexe :
xexe joined the channel.
[2025-01-16 08:54:21]
poalex123 :
poalex123 joined the channel.
[2025-01-17 18:42:18]
sachimic :
sachimic joined the channel.
[2025-01-18 00:11:54]
m.garcia :
m.garcia joined the channel.
[2025-01-20 13:06:30]
rabanks :
rabanks joined the channel.
[2025-01-21 08:44:10]
fxnull :
fxnull joined the channel.
[2025-01-21 17:17:04]
taubensuppe :
taubensuppe joined the channel.
[2025-01-21 19:56:06]
abhishekprasad :
abhishekprasad joined the channel.
[2025-01-26 07:44:31]
ludovic :
ludovic joined the channel.
[2025-01-26 12:18:33]
bi93 :
bi93 joined the channel.
[2025-01-26 19:19:03]
metalheadz :
metalheadz joined the channel.
[2025-01-26 19:37:53]
kingmot :
kingmot joined the channel.
[2025-01-29 00:27:14]
e5nafu7u :
e5nafu7u joined the channel.
[2025-01-29 09:42:49]
luka :
luka joined the channel.
[2025-01-29 09:44:29]
ortsa :
ortsa joined the channel.
[2025-01-30 07:09:16]
qneq1 :
qneq1 joined the channel.
[2025-01-30 12:11:42]
fdtrader :
fdtrader joined the channel.
[2025-01-30 15:32:31]
ferdn4ndo :
ferdn4ndo joined the channel.
[2025-01-30 15:59:51]
thermalorange5 :
thermalorange5 joined the channel.
[2025-01-30 20:52:36]
j280i :
j280i joined the channel.
[2025-02-01 02:09:25]
xiaodong69 :
xiaodong69 joined the channel.
[2025-02-01 12:26:55]
khaderabu :
khaderabu joined the channel.
[2025-02-02 05:25:17]
georgero :
georgero joined the channel.
[2025-02-02 16:06:09]
tterb :
tterb joined the channel.
×
User Info
Username:
Last Login:
First Name:
Last Name: