Messages in mavic_air_2
[2020-05-11 19:43:12]
beerniso :
@beerniso has joined the channel
[2020-05-12 07:34:46]
hazardc :
@hazardc has joined the channel
[2020-05-15 03:31:58]
274522583 :
@274522583 has joined the channel
[2020-05-16 15:26:12]
loaderbull :
@loaderpoo has joined the channel
[2020-05-17 12:29:17]
oakley75 :
@reoak has joined the channel
[2020-05-18 06:57:58]
kremerfpv :
@kremerfpv has joined the channel
[2020-05-18 06:59:23]
kremerfpv :
Has anyone successfully got FCC mode forced to a CE location?
Fake GPS app doesn't work. As soon as the drone acquires GPS lock it switches back to CE, even if it's armed.
[2020-05-19 22:04:09]
heresmydron :
@heresmydron has joined the channel
[2020-05-21 07:59:52]
webhdx :
@maciej.cezary.kobus has joined the channel
[2020-05-23 17:03:53]
pawelsky :
@pawelsky has joined the channel
[2020-06-01 04:33:06]
bjoneseying :
@bjoneseying has joined the channel
[2020-06-07 15:15:07]
graeme.wilson50 :
@graeme.wilson50 has joined the channel
[2020-06-16 00:06:59]
oakley75 :
Mavicpilots reporting new firmware, but the DJI release notes are not updated yet. FYI.
V01.00.0250
+ Added switch to automatically detect subjects in FocusTrack, and optimized the
overall performance of FocusTrack.
+ Added ability to track subjects by dragging a box around it when using Free
Hyperlapse mode.
+ Added ability to store 8K Hyperlapse in RAW format, use playback to view 8K
Hyperlapse, and for more media players to play 8K Hyperlapse.
+ Added prompts in DUI Fly when GPS experiences interference.
* Increased maximum flight speed to 19 m/s when using Spotlight in Sport mode,
and added support for Spotlight at night.
* Optimized Smart RTH.
* Optimized performance when using wave gesture to trigger ActiveTrack and
QuickShots.
* Reduced noise when recording HDR video at night.
[2020-06-16 13:24:10]
oakley75 :
Fly app out, v1.1.5
[2020-06-16 14:08:14]
loaderbull :
Where is the fly app? You mean android? IOS still 1.1.3
[2020-06-16 17:40:40]
oakley75 :
Yeah just Android, my bad. I download from dji for the apk
[2020-06-17 06:38:59]
poopnondji :
@vdub804 has joined the channel
[2020-06-19 01:28:22]
mike4884 :
@mike4884 has joined the channel
[2020-06-22 05:15:25]
softice :
@softice has joined the channel
[2020-06-22 17:37:09]
dreamist :
@dreamist has joined the channel
[2020-06-23 06:04:31]
fabiotekno125 :
@fabiotekno125 has joined the channel
[2020-06-28 02:32:42]
daviskat :
@hkroot1314 has joined the channel
[2020-06-28 16:34:44]
mail451 :
@mail451 has joined the channel
[2020-06-30 20:23:25]
mail451 :
Just flew my MA2, around sunset time, so low light in my backyard, and it doesn't do OA with low light? My spark handles that perfectly, in fact I had both side by side.
[2020-07-03 05:37:34]
makingthisnameup :
@makingthisnameup has joined the channel
[2020-07-06 00:10:01]
hazardc :
@mail451 FOR SURE, my MA2 sensors give out WAY early... and AT 3.0 has genuinely been a disappointment (tried to get it to folllow my car in broad daylight and it was a series of failures)
It obviously has some cool stuff going on inside for object avoidance with limited sensor direction, (it's good at not flying up or sideways into stuff, probably FOV) but the sensors give out very easy in low light, which is a bummer!
[2020-07-07 05:13:59]
mike4884 :
that's because the spark uses infrared on the front sensor the mavic Air 2 has regular optical sensors like little cameras.... Infrared will work at night and daytime
[2020-07-07 05:15:38]
mike4884 :
Most DJI drones won't work in low light... the only one that kind of does is the spark because it has the infrared sensor in the front pretty much there only drone with that... Which is cool but in the daytime we have more accuracy than infrared sensor so I would rather have that
[2020-07-07 19:20:02]
ttdqj4wj3hgcy5zg85qi :
@ttdqj4wj3hgcy5zg85qi has joined the channel
[2020-07-09 10:28:26]
mail451 :
Table with params: <http://dji.retroroms.info/howto/mavicair2params>
[2020-07-30 10:31:28]
poopnondji :
Finally have gimbal adjustments for MA2
[2020-07-30 10:31:33]
poopnondji :
[https://forum.dji.com/forum.php?mod=viewthread&tid=221397&extra=page%3D1%26filter%3Dtypeid%26typeid%3D757%26typeid%3D757](https://forum.dji.com/forum.php?mod=viewthread&tid=221397&extra=page%3D1%26filter%3Dtypeid%26typeid%3D757%26typeid%3D757)
[2020-07-30 10:37:16]
mail451 :
GREAT!!!
[2020-07-30 10:39:14]
mail451 :
Anyone has the 1.1.6 APK? Not available here yet
[2020-07-30 10:55:04]
poopnondji :
not available in the US yet, and the way it was with 1.1.5 we might not see an IOS version until Sept/Oct.
[2020-07-31 16:09:24]
mail451 :
<https://www.apkmirror.com/apk/dji-technology-co-ltd/dji-fly/dji-fly-1-1-6-release/>
[2020-07-31 16:41:39]
mail451 :
Pitch/yaw speed/smoothness for each mode
[2020-07-31 19:04:18]
poopnondji :
installed on android 11 but keeps fc'ing
[2020-08-06 05:19:29]
hazardc :
is it possible to get the feed from the IR sensor? to do NDVI or similar? I'm pretty sure i'm gonna get another spark. the one mod that would make me go bu another one tmrw would be "better feed" and figuring out how to swap one of the 3-axis from the air1 or mav mini would make it timeless IMO!! :smile:
[2020-08-08 22:24:51]
heresmydron :
FYI if you want to bypass activation on an air 2, filter all requests going out of the app, and fake the response of all requests going to <https://active.dji.com/bind_service?cc=&main_sn=YOUR_SN_NUMBER>
[2020-08-08 22:24:56]
heresmydron :
with the following payload
[2020-08-08 22:25:04]
heresmydron :
```{
"status": 0,
"msg": "success"
}```
[2020-08-08 22:25:27]
heresmydron :
youll need frida to nerf the ssl cert pinning
[2020-08-09 09:03:38]
heresmydron :
anyone here with the ma2ue3w model? seems that it has adb-s but only enabled wheni fake the location to us.
[2020-08-09 09:04:13]
heresmydron :
the other thign taht is driving me crazy is that it doesnt show 2.4/5.8/dual band on the app, just manual/auto and bandwidth
[2020-08-09 09:04:59]
heresmydron :
ive seen plenty of videos with those options available but mine refuses to show them, wondering if they released a CE version with just one band?
[2020-08-09 09:43:29]
heresmydron :
what about freq? can you switch between 2.4/5.8?
[2020-08-09 09:45:27]
heresmydron :
thats all i see on mine
[2020-08-09 09:45:29]
heresmydron :
[2020-08-09 09:45:45]
heresmydron :
[2020-08-09 13:48:38]
monkeyman :
I’ve try enable adsb on my ma2 using us fcc, but none of man aircraft warning appears on the map. but on mavic enterprise appears on map
[2020-08-10 04:06:41]
poopnondji :
[https://forum.dji.com/forum.php?mod=viewthread&tid=222182&extra=page%3D1%26filter%3Dtypeid%26typeid%3D757%26typeid%3D757](https://forum.dji.com/forum.php?mod=viewthread&tid=222182&extra=page%3D1%26filter%3Dtypeid%26typeid%3D757%26typeid%3D757)
[2020-08-10 07:10:46]
mail451 :
Zoom AND 4k Hyperlapse!! Damn just in time for my vacation
[2020-08-10 07:45:58]
poopnondji :
yea gonna test out zoom in the a.m.
[2020-08-10 10:04:23]
mail451 :
What would be sick is Hyperlapse zoom (so going from 1X to 4X)
[2020-08-10 10:04:25]
mail451 :
4K zoom (there's 2 modes: 4K Wide and 4K zoom). 1080p/2.7k now have a 1X/1.3X/2X zoom toggle)
[2020-08-10 10:25:46]
poopnondji :
just noticed if you hold your finger on zoom button you can scroll up/down to zoom in/out
[2020-08-10 10:28:43]
poopnondji :
1080p/60 can zoom up to 4x
[2020-08-10 11:27:14]
poopnondji :
That thumbs up is for the pics you posted on Twitter this morning :sunglasses:
[2020-08-10 11:57:56]
mail451 :
Haha, it's pretty nice here
[2020-08-10 11:58:13]
mail451 :
The clouds are super low I might just get away with 120 meters up
[2020-08-10 12:33:08]
mail451 :
Wow Moment confirms no anamorphic lens for Ma2 :( [https://reddit.com/r/MOMENT/comments/glnnfo/anamorphic_lens_for_mavic_air_2/fztzn1b?context=3](https://reddit.com/r/MOMENT/comments/glnnfo/anamorphic_lens_for_mavic_air_2/fztzn1b?context=3)
[2020-08-13 08:41:43]
mail451 :
Mavic Air 2 4K hyperlapse sample, I think it's a bit more stuttery than the 1080p mode
[2020-08-13 09:07:23]
poopnondji :
Damn slack I can’t get the clip to play properly. Dope scenery tho!
[2020-08-13 09:26:52]
mail451 :
I'll put it up on YT shortly, can't get the Ma2 not to go home whenever the RC disconnects, it's just momentarily till I get VLOS again. That'd be perfect
[2020-08-13 10:39:06]
heresmydron :
guess you already know, but theres an option on the app taht allows you to decide what to do in case the drone disconnects, RTH, hover or land
[2020-08-14 12:00:36]
mail451 :
konrad@konrad-pc [wm231 (master)]: diff comm_og_service_tool_dump.txt comm_og_service_tool_dump_01.00.0340.txt
392c392
< user_avoid_enable|g_config.avoid_obstacle_limit_cfg.user_avoid_enable default = 1 range = < 0 .. 1 >
---
> user_avoid_enable|g_config.avoid_obstacle_limit_cfg.user_avoid_enable default = 1 range = < 0 .. 2 >
397a398
> forbid_side_fly default = 0 range = < 0 .. 1 >
412a414
> rc_lost_delay_time_for_timelapse default = 0.000000 range = < 0.000000 .. 1000000000.000000 >
424a427,433
> gimbal_fpv_mode_enable default = 0 range = < 0 .. 1 >
> fpv_roll_follow_enable default = 0 range = < 0 .. 1 >
> fpv_roll_pitch_fltr_fc default = 0.750000 range = < 0.010000 .. 20.000000 >
> fpv_yaw_fltr_fc default = 10.000000 range = < 0.010000 .. 20.000000 >
> fpv_roll_max default = 20.000000 range = < 0.100000 .. 50.000000 >
> fpv_r_p_rate_max default = 180.000000 range = < 0.100000 .. 500.000000 >
> fpv_r_comp_exp default = 0.800000 range = < 0.100000 .. 0.900000 >
460c469
< go_home_current default = 7500 range = < 0 .. 65535 >
---
> go_home_current default = 7800 range = < 0 .. 65535 >
650c659
< g_config.mode_sport_cfg.tors_exp_mid_point default = 0.350000 range = < 0.100000 .. 0.900000 >
---
> g_config.mode_sport_cfg.tors_exp_mid_point default = 0.250000 range = < 0.100000 .. 0.900000 >
[2020-08-14 12:01:01]
mail451 :
"rc_lost_delay_time_for_timelapse default" Ahhh that might be it?
[2020-08-25 00:35:07]
poopnondji :
Anyone flying with the .340 update noticing decreased signal strength?
[2020-08-25 08:21:05]
monkeyman :
still perfect, can flight 11.1km distance.
[2020-08-25 08:27:00]
mail451 :
Do you get feed cuts at 11km?
[2020-08-25 19:37:52]
poopnondji :
Seen a couple people posting that the update reduced their signal/range. Did a urban signal test and had no breakup for 2 miles.
[2020-09-08 17:57:15]
hazardc :
you did your test with the new FW or with teh old FW ?
[2020-09-11 05:12:38]
poopnondji :
Upgraded fly app to 1.1.8 yesterday. Looks like it disables remote id.
[2020-09-11 06:21:36]
mail451 :
I think that was there before
[2020-09-11 07:28:51]
poopnondji :
On 1.1.6 or earlier everytime I unticked UUID and identification flight information then clicked apply it would always fail. Even on the Mini but now it's unticked on it's own.
[2020-09-11 08:22:19]
heresmydron :
mine was always disabled, with the min an the air
[2020-09-11 08:22:45]
heresmydron :
"identification" and "flight information" text boxes only appear when you tick the second option
[2020-09-11 09:03:00]
poopnondji :
Must've been a bug with the ios version on my iPhone. mine were always pre ticked and could never be unticked till now.
[2020-09-11 09:32:41]
heresmydron :
yeah im on android
[2020-10-08 20:22:26]
heresmydron :
does anyone remember on which firmware they removed battery_type_0? (or locked the value to the defgault one)
[2020-11-09 19:39:44]
heresmydron :
FYI for anyone that didnt see @bin4ry’s post on ~mavic_air_2
[2020-11-09 19:39:46]
heresmydron :
Increasing the vertical speed of the Mavic Air 2
Unfortunately
DJI for some unknown reason, did not provide the ability to adjust the
vertical speed and other parameters in standard modes such as Normal and
Sport. However we can replace the choice of Sport or Tripod modes (on
the remote control mode selector) with the "Gentle/Beginner" mode and
adjust it to values higher than in standard Sport mode.
To do this, we need to change a number of drone parameters through Drone-Hacks:
-1
Find the parameter "g_config_control_control_mode[1]" and change the
value frokm 8 to 6. This change Sport mode (8) to Beginner/Gentle mode
(6).
-2 Find the parameter "mode_gentle_cfg_vert_vel_down" and change the maximum speed of descent from -1 to -10.
-3 Find the parameter "mode_gentle_cfg_vert_vel_up" and change the maximum speed of descent from 1.5 to 10.
-4
Change the rate of descent in Gentle mode from 2 m/s to the required.
To ensure stability, we do not recommend more than 8 m/s.
-5 Find the parameter "mode_gentle_cfg_rc_scale" and change the value from 0.25 to 1.
-6 Find the parameter "mode_gentle_cfg_tilt_atti_range" and change the angle of attack from 20 degrees to 35.
-7 Find the parameter "g_config_mode_gentle_cfg_tors_gyro_range" and Change the rotation speed from 75 to 100 or 175 (optional)
NOTE: Ensure that you save each parameter after making a change to write all parameters to the drone.
Credits to our Russian user 'Pirandos'
[2020-11-09 19:40:00]
bin4ry :
@bin4ry has joined the channel
[2020-11-09 19:40:25]
heresmydron :
direct link to the post <https://dji-rev.slack.com/archives/CQ08J890D/p1604939714075400>
[2020-11-09 19:40:33]
heresmydron :
havent tried it myself, will test it out this weekend
[2020-11-09 22:52:21]
poopnondji :
.0250
[2020-11-09 22:56:17]
poopnondji :
Ma2 speed hack has been out for a while now @heresmydron a couple other tweaks too [https://t.me/mavic_club_channel](https://t.me/mavic_club_channel)
[2020-11-10 10:23:26]
heresmydron :
oh my i need to join that group, thanks for the heads up :slightly_smiling_face:
[2020-11-14 19:23:10]
heresmydron :
has anyone followed these instructions? <https://dji-rev.slack.com/archives/C013DHE74GM/p1604950786003100>
[2020-11-14 19:25:11]
heresmydron :
it does increase the ascent speed but it doesnt do anything for the descent speed
[2020-11-14 19:25:26]
heresmydron :
plus step 4 is quite vague... "Change the rate of descent in Gentle mode from 2 m/s to the required."
[2020-11-14 19:25:31]
heresmydron :
like, what param is that? :F
[2020-12-07 07:59:50]
monkeyman :
only effect to vel up, to vel down it max to 5. tht atti range doesn effect at all
[2020-12-07 07:59:59]
monkeyman :
I just try it
[2020-12-07 08:01:47]
monkeyman :
firmware 0460
[2020-12-09 03:56:08]
monkeyman :
downgraded to 360, same result.
[2020-12-17 08:46:31]
poopnondji :
[https://youtu.be/i86LnaNTe8c](https://youtu.be/i86LnaNTe8c)
[2020-12-17 13:38:23]
mainframe :
Is it using virtual sticks method?
[2020-12-17 18:54:58]
poopnondji :
Yea
[2021-01-05 14:57:53]
fun.day.cool :
Has anyone managed to bypass the altitude ceiling on the mavic air 2?
[2021-01-05 16:23:38]
edo :
I don't know the details::
<https://www.youtube.com/watch?v=NbobMwZe6No>
[2021-01-06 12:46:52]
heresmydron :
man id pay good money to be able to do that
[2021-01-06 19:09:22]
fun.day.cool :
I would too
[2021-01-13 16:16:06]
projectabs :
anyone know how to get decrypted firmware for the mavic air 2? just got one and was hoping to mess around
[2021-01-13 22:38:15]
heresmydron :
nothing public yet (that im aware of)
[2021-01-13 22:38:27]
heresmydron :
try binwalking at least
[2021-01-19 23:23:06]
heresmydron :
you know more than me :wink:
[2021-01-21 19:32:42]
fun.day.cool :
I find that hard to believe
[2021-04-18 17:13:46]
mail451 :
Does anybody need a broken Mavic air 2? Posted in ~general, but I think I'll sell it for very cheap to someone who's researching root/vulns etc... Think 200-250eur.
[2021-04-18 17:16:11]
mail451 :
Pretty sure the motherboard is broken but if someone has a good use for it PM me. Gimbal needs replacement too. Arms, motors, upper body still in good shape.
[2021-05-07 00:03:47]
the.hope.ltd :
Hi folks
My gimbal works fine after Calibration tool
But gimbal calibration error message doesn't go away from notification
Any help ?
[2021-05-07 03:36:34]
rameezahmed1998 :
Refresh the frimwere
[2021-05-30 15:41:22]
soppe5276 :
I'm also having the same issue...
[2021-06-02 16:34:02]
dnacho :
Anyone been able to swap the gimbal of a mavic air 2?
[2021-06-02 16:34:16]
dnacho :
Wich part did you swap?
[2021-06-03 23:33:58]
the.hope.ltd :
Roll
[2021-06-03 23:34:47]
the.hope.ltd :
I noticed gimbal shakes after ac motors start
[2021-06-03 23:35:58]
the.hope.ltd :
You can only swap the roll with pitch and camera
[2021-06-07 14:37:46]
dnacho :
the only error you still got is the calibration error?
[2021-06-07 14:37:51]
dnacho :
And the gimbal does work?
[2021-06-07 14:38:38]
dnacho :
i did not quite understood that @the.hope.ltd
[2021-06-07 14:39:15]
the.hope.ltd :
Gimbal motors only
[2021-06-07 14:40:06]
dnacho :
oh yeah yeah and you have to swap the sensor for the old one right?
[2021-06-07 14:40:09]
dnacho :
Does anyone know the real source of the esc connection error code 30085 on the mavic air 2 and mavic air 2s?
[2021-06-07 20:37:56]
soppe5276 :
The gimbal is working.. But in DJI Fly App there is an error "Gimbal Calibration error 40011".
[2021-06-07 20:38:52]
dnacho :
for you to remove that error you need the special firmware
[2021-06-07 20:40:05]
soppe5276 :
Where can I get the Firmware?
[2021-07-10 23:53:23]
chaseclear :
Hey y’all, been down a few rabbit holes the last few days searching for some options for the Mavic Air 2. Mainly trying to find a solution to “offline” or bypass activation. Purchased off of EBay, and DJI confirmed fraudulent/stolen therefore cannot activate. Any help is appreciated!!
[2021-07-11 20:41:25]
atlantic :
so you bought stolen goods? why not report seller to thr polics?
[2021-07-11 20:41:54]
atlantic :
the police
[2021-07-14 15:29:43]
chaseclear :
I did, police report against the seller and eBay finally refunded me but let me keep the unusable drone. Just got the new one so have one to fly and spare parts I suppose, but hoping to be able to use the 2nd to mod, etc.
[2021-07-30 15:12:55]
austinc3030 :
According to this forum, there is a release of NLD they are targeting for today for the MA2. Has anyone seen or heard anything else on this? [https://nolimitdronez.com/boards/topic/3671/mavic-air-2/page/4#6793](https://nolimitdronez.com/boards/topic/3671/mavic-air-2/page/4#6793)
[2021-07-31 18:37:09]
rameezahmed1998 :
hello mavic air 2 gimbal not responding motors are dead its not moving when i turn on aircrift
[2021-07-31 18:37:19]
rameezahmed1998 :
any solution??
[2021-07-31 18:37:55]
rameezahmed1998 :
error 40011
[2021-07-31 18:40:25]
rameezahmed1998 :
hello mavic air 2 gimbal not responding motors are dead its not moving when i turn on aircrift
[2021-09-11 17:51:31]
heresmydron :
hi ~mavic_air_2 ive been researching on the gentle mode in A2S. Unfortunately in the A2S the gentle mode hack is not as straight forrward as in the A2
[2021-09-11 17:52:06]
heresmydron :
`fswitch_selection|g_config.control.control_mode[0]` in A2S has 20 possible values, ive tested them all, here are the results:
[2021-09-11 17:52:26]
heresmydron :
fswitch_selection_1\|g_config.control.control_mode\[1\] 3 / Same performance as P? DRIFTS A LOT
fswitch_selection_1\|g_config.control.control_mode\[1\] 4 / Contorller says its sports modes. Behaves as sports mode?
fswitch_selection_1\|g_config.control.control_mode\[1\] 5 / Contorller says its P modes. Seems to behave slower than P
fswitch_selection_1\|g_config.control.control_mode\[1\] 9 / Contorller says its P modes. AC doesnt move
fswitch_selection_1\|g_config.control.control_mode\[1\] 10 / Contorller says nothing. Nothing special
fswitch_selection_1\|g_config.control.control_mode\[1\] 11 / Contorller says nothing. Behaves like P? GOOD CANDIDATE
fswitch_selection_1\|g_config.control.control_mode\[1\] 13 / Contorller says nothing. Behaves like P? GOOD CANDIDATE
fswitch_selection_1\|g_config.control.control_mode\[1\] 14 / Contorller says nothing. Behaves like P? GOOD CANDIDATE
fswitch_selection_1\|g_config.control.control_mode\[1\] 15 / Contorller says nothing. Behaves like P? GOOD CANDIDATE
fswitch_selection_1\|g_config.control.control_mode\[1\] 16 / LAUNCHED ITSELF FORWARD AND CRASHED INTO THE FRIDGE :(
fswitch_selection_1\|g_config.control.control_mode\[1\] 17 / LAUNCHES FORWARD!
fswitch_selection_1\|g_config.control.control_mode\[1\] 18 / LAUNCHES FORWARD!
fswitch_selection_1\|g_config.control.control_mode\[1\] 19 / Contorller says nothing. Descent speeds are the same as P
fswitch_selection_1\|g_config.control.control_mode\[1\] 20 / Contorller says nothing. Descent speeds are the same as P
[2021-09-11 17:53:32]
heresmydron :
what im looking for is to speed up the decsent speeds
[2021-09-11 17:54:00]
heresmydron :
couple of notes:
• ive tested all these values inside my home, except 19 and 20 that i can confirm they dont do jack shit
• 10 to 15 might be good candidates for to test the gentle mode hack, will research tomorrow
• be extra carfeul with 16 to 18. as soon as you switch to sport mode the AC will launch itself forward full speed, learned that the hard way
[2021-09-11 17:55:41]
heresmydron :
wondering if anyone explored this as well, if you did any research around parameters please let me know
[2021-09-12 02:19:08]
dronepilot :
[2021-09-12 02:19:16]
dronepilot :
Anyone aware of a feature firmware update to v2 fpv goggles compatibility on Air 2s?
[2021-10-30 12:20:36]
jj :
madmaqx joined the channel.
[2021-10-31 00:22:29]
will :
will joined the channel.
[2021-10-31 21:11:34]
lazypilot :
lazypilot joined the channel.
[2021-11-05 09:27:56]
konraditurbe :
konraditurbe joined the channel.
[2021-11-05 15:25:26]
dave0x6d :
dave0x6d joined the channel.
[2021-11-07 06:26:55]
jackmax :
jackson joined the channel.
[2021-11-10 03:17:58]
flyinghacker :
flyinghacker joined the channel.
[2021-12-11 11:40:59]
cooker :
cooker joined the channel.
[2022-01-18 00:49:22]
il1oo0 :
il1oo0 joined the channel.
[2022-01-19 16:17:31]
j4ck :
j4ck joined the channel.
[2022-01-26 20:14:05]
mavic2reverser :
mavic2reverser joined the channel.
[2022-03-19 13:24:27]
velhojow :
velhojow joined the channel.
[2022-03-24 16:28:40]
speatuk :
speatuk joined the channel.
[2022-03-24 16:30:09]
speatuk :
@speatuk left the channel.
[2022-04-01 10:02:17]
ucusdyuxljbqrlc :
ucusdyuxljbqrlc joined the channel.
[2022-04-02 11:48:05]
speatuk :
speatuk joined the channel.
[2022-04-02 11:48:29]
speatuk :
@speatuk left the channel.
[2022-04-03 07:35:15]
mangadiso :
midgelf joined the channel.
[2022-04-03 14:58:52]
ronykom :
ronykom joined the channel.
[2022-05-05 15:33:19]
spacealien :
spacealien joined the channel.
[2022-05-23 20:48:20]
jjbyrnes29 :
jjbyrnes29 joined the channel.
[2022-05-26 21:00:57]
oxolot :
oxolot joined the channel.
[2022-06-03 19:52:54]
shiftag :
shiftag joined the channel.
[2022-07-11 17:38:12]
anesta :
anesta joined the channel.
[2022-07-19 03:55:28]
enk2022 :
enk2022 joined the channel.
[2022-07-31 17:25:50]
lyova :
lyova joined the channel.
[2022-09-13 03:56:57]
nmikus :
nmikus joined the channel.
[2022-09-27 10:47:38]
herr.frei :
herr.frei joined the channel.
[2022-10-16 11:06:28]
jack117wb :
jack117wb joined the channel.
[2022-10-30 07:11:34]
bob.alki :
bob.alki joined the channel.
[2022-11-06 08:44:38]
bendernet :
bendernet joined the channel.
[2022-11-10 03:53:10]
areoc :
areoc joined the channel.
[2022-11-12 06:20:26]
pingspike :
pingspike joined the channel.
[2022-11-20 08:31:29]
djifans :
djifans joined the channel.
[2022-12-05 14:51:11]
urca87 :
urca87 joined the channel.
[2023-01-23 22:42:54]
loaderbull :
@loaderbull left the channel.
[2023-01-28 20:24:09]
jglx3p :
jglx3p joined the channel.
[2023-02-03 21:38:32]
lokidokister :
lokidokister joined the channel.
[2023-02-21 06:09:00]
gudvin :
gudvin joined the channel.
[2023-03-09 16:11:40]
mavic2pro666 :
xiamen66 joined the channel.
[2023-04-11 15:45:23]
blowfish448 :
blowfish448 joined the channel.
[2023-04-14 14:09:40]
yutremalto :
yutremalto joined the channel.
[2023-04-14 14:11:56]
yutremalto :
@yutremalto left the channel.
[2023-05-17 11:34:29]
joelg :
joelg joined the channel.
[2023-05-30 13:46:14]
lishujian3 :
lishujian3 joined the channel.
[2023-06-11 01:13:42]
milenovic :
milenovic joined the channel.
[2023-06-19 23:44:13]
martymcfly :
martymcfly joined the channel.
[2023-08-01 13:51:14]
crashing_bird :
crashing_bird joined the channel.
[2023-08-16 09:06:59]
zy870621 :
zy870621 joined the channel.
[2023-08-19 22:21:48]
aesurvey :
aesurvey joined the channel.
[2023-08-27 03:08:21]
johnnokomis :
johnnokomis joined the channel.
[2023-09-13 10:14:50]
molda :
molda joined the channel.
[2023-10-04 07:24:40]
poohtocs :
poohtocs joined the channel.
[2023-10-15 20:50:27]
dumldore_newbi :
dumldore_newbi joined the channel.
[2023-10-27 19:05:29]
mgracio :
mgracio joined the channel.
[2023-12-31 22:22:08]
djtaz :
djtaz joined the channel.
[2024-01-18 01:08:06]
enk2022 :
@enk2022 left the channel.
[2024-01-18 15:43:49]
basilius :
basilius joined the channel.
[2024-02-06 19:59:10]
ryantkasher :
ryantkasher joined the channel.
[2024-02-06 20:05:28]
ryantkasher :
@ryantkasher left the channel.
[2024-02-10 03:22:19]
accountfrompl :
accountfrompl joined the channel.
[2024-02-12 20:45:05]
lining-preps.0u :
lining-preps.0u joined the channel.
[2024-02-22 18:10:16]
otter :
otter joined the channel.
[2024-04-03 01:42:25]
dreamtree :
dreamtree joined the channel.
[2024-04-11 13:10:21]
halowarrior8 :
halowarrior8 joined the channel.
[2024-05-14 14:12:08]
symza :
symza joined the channel.
[2024-05-21 07:01:18]
wag-on :
wag-on joined the channel.
[2024-06-25 11:58:19]
pouyapm :
pouyapm joined the channel.
[2024-06-26 23:33:44]
johnibhramin :
johnibhramin joined the channel.
[2024-07-01 17:29:55]
mrsmith :
mrsmith joined the channel.
[2024-07-26 15:53:33]
ogini_ayotanom :
ogini_ayotanom joined the channel.
[2024-09-09 14:41:44]
ar2rgo :
ar2rgo joined the channel.
[2024-11-01 11:34:12]
home114 :
home114 joined the channel.
[2024-11-05 07:38:03]
feifeitu :
feifeitu joined the channel.
[2024-12-23 13:01:51]
osama-binladen :
osama-binladen joined the channel.
×
User Info
Username:
Last Login:
First Name:
Last Name: